SKIL - Deryck A. Gibson Limited

2008 Product Catalog
Power Tools & Accessories
TABLE OF CONTENTS
DRILLING/DRIVING
DRILLING/DRIVING
SKIL Lithium Ion Battery Technology Benefits
Reciprocating Saws
PAGE 8
ENVIRONMENTALLY FRIENDLY
LONGER LIFE
Holds a Charge for up to 18 Months so the tools are always
ready when you need them.
Lithium Ion
GRINDING
MORE POWER
PAGE 3
Lithium ion batteries provide more consistent power throughout the battery
charge cycle while Ni-cad batteries lose their power as the battery runs down.
Grinders
PAGE 4
LIGHTER WEIGHT
Lithium Ion
The average lithium ion battery is 25% lighter than a comparable
nickel cadmium (Ni-cad) battery.
VOLTAGE
PAGE 8
Drills/Drivers
Lithium ion batteries contain non-hazardous soft metals that are safe for
disposal while Ni-cad batteries contain toxic metals that cause health risks
when disposed of in landfills.
Lithium
Ion
Advantage
PLANING
Ni-Cd
BATTERY CHARGE CYCLE
Planers
PAGE 8
Corded Drills
PAGE 5
WOODWORKING
2815-02
Sanders
Screwdrivers
PAGE 9
PAGE 5
SKIL’S unique lithium ion charging system features electronics
embedded in the products. These electronics ensure that the battery is
TM
never completely drained so the overall life of the battery is maximized.
They also monitor the charge to the tool’s battery, so it never over-charges, which has a negative impact on the battery life. The
technology allows users to store the tool/battery on the charger indefinitely without causing damage to the battery.
18V Lithium Ion
Variable Speed
Drill/Driver
COMBO KITS
Combo Kits
PAGE 5
2510-02
14.4V Lithium Ion
Variable Speed
Drill/Driver
BENCHTOP
CUTTING
Benchtop
2372-01
ACCESSORIES
Accessories
Jigsaws
PAGE 8
2
PAGE 11-19
Warranty
PAGE 19
•
•
•
•
•
•
•
•
Lightweight and Powerful
0-800 No-Load RPM
160 IN/LBS of Torque
15+1 Clutch with Soft-Grip
Single Sleeve 3/8” Chuck
Metal Gear Train
Forward/Reverse Indicators
Removable Lithium Ion Battery Pack charges
on or off tool
• Built-In PowerLight and Battery Fuel Gauge
• Customized Soft-Grip Handle
Includes: 4 Screwdriver Bits, One (1) 14.4V
Lithium-Ion Battery Pack and SKIL SmartCharge
System™ Charger
PAGE 10-11
PAGE 6-7
Lightweight and Powerful
0-850 No-Load RPM
175 IN/LBS of Torque
15+1 Clutch with Soft-Grip
Single Sleeve 3/8” Chuck
Metal Gear Train
Forward/Reverse Indicators
Removable Lithium Ion Battery Pack charges
on or off tool
• Built-In PowerLight and Battery Fuel Gauge
• Customized Soft-Grip Handle
2362-01
7.2V-Li
Variable
Speed
Drill/Driver
Includes: 4 Screwdriver Bits, One (1) 18V
Lithium-Ion Battery Pack and SKIL SmartCharge
System™ Charger
Routers
PAGE 9
•
•
•
•
•
•
•
•
7.2V-Li
Power
Wrench
•
•
•
•
•
•
•
•
•
Torque: 75 IN/LBS of torque in auto mode
400 IN/LBS of torque in manual mode
Fits all standard 1/4” sockets
Compact design for close quarter applications
Forward/Reverse Operation
All Metal Gear Train
Ergonomic Handle with Soft-Grip
Durable metal front end
Wall and Desk Mountable Cradle Charger
Includes: 17-Piece Accessory Set and SKIL
Smartcharge System™ 3-Hour Charger
• Compact and Powerful
• 10+1 Clutch Settings for drilling
and driving
• Variable Speed Trigger (0-500 RPM)
• Autobrake for precise screwdriving
• Quick Release 1/4” Hex Chuck
• Weighs less than 21 oz. - lightweight
for less user fatigue
• Battery Fuel Gauge
• Forward/Reverse Indicators
• Wall and Desk Mountable
Cradle Charger
Includes: 10-Piece Accessory Set and SKIL
SmartCharge System™ 3-Hour Charger
2352-01
3.6V-Li Power
Cutter
• Lithium ion battery holds a charge up to
18 months
• Cuts materials up to 1/4” thick
• Lightweight, Ergonomic Design with
Soft-Grip Handle
• AutoSharp Blade System
• Battery Charge Indicator
• Hang hole for convenient storage
• Precision Ground Blade
* Available 6/2008
Includes: Skil Smartcharge System Charger
2346-01
•
•
•
•
•
3.6V-Li
Palm Sized
Screwdriver
2336-02
3.6V-Li
Palm Sized
Screwdriver
Magnetic 1/4" Hex Chuck
Built-in Worklight
Forward/Reverse Indicators
Battery Fuel Gauge
SKIL SmartCharge System Cradle
charger stores tool and accessories
Includes: 22-Piece Accessory Set
and Cradle Charger
• More Power, Longer Charge
• Lightweight and Easy to Use - Just weighs
10oz - lightweight for less user fatigue
• 1/4" Hex Chuck
• Forward/Reverse Indicator Arrows Show Direction the Bit is Spinning
• Rechargeable - Accepts a Full Charge
Anytime Without Affecting Battery Life
Includes: 34-Piece Accessory Set,
Cradle Charger and Storage Container
For project ideas and tips: www.skil.com
3
DRILLING/DRIVING
DRILLING/DRIVING
18V
Heavy Duty or Serious Usage
14.4V
Medium Duty Usage
12V and below
Occasional Usage
Applications:
Applications:
Applications:
Heavy duty drilling and driving - repetitive
drilling in hardwood or treated lumber
Home improvement projects like deck
building, remodeling, woodworking
Smaller projects including
infrequent drilling and driving for
assembly, repairs or woodworking
2895-10
18V 4-Tool
Combo Pack
SKIL CORDLESS DRILL/DRIVER OVERVIEW
®
95 Series
87 Series
Features
Features
Variable 2-Speed Gear Box
On-tool Bit Storage & bubble level
Variable 2-Speed Gear Box
On-tool Bit Storage
Variable Single Speed
On-tool Bit Storage
Specifications
Specifications
Specifications
no 0-450/min, 0-1400/min RPM
20 Clutch Settings
1.5 Ahr Ni-Cad Battery
1 Hour Charger
no 0-400/min, 0-1250/min RPM
26 Clutch Settings
1.2 Ahr Ni-cad Battery
1 Hour Charger
0-700 RPM
16 Clutch Settings
1.2 Ahr Ni-cad Battery
3 Hour Charger
Models
Models
Models
18 V: 2895
14.4V: n/a
12 V: n/a
18 V: 2887-05
18 V: 2866-03, 2866-02
14.4 V: 2566-03, 2566-02
12 V: 2466-02
2895-01
18V 2-Speed
Drill/
Driver
66 SERIES
•
•
•
•
•
•
•
•
•
•
2-Speed Gear Box: 0-450 RPM and 0-1400 RPM
Torque: 400 in-lbs
20-Position Clutch Ring with Soft-Grip
3/8” Single Sleeve Keyless Chuck with anti-mar tips
1.5 Ahr NiCd Battery charges in 1.5 hours
Side-Assist Handle for left-handed or a
right-handed user.
On-Tool Removable Pod accommodates
bit storage, a bit index, or a bubble level pod
Spring-Loaded Battery Release
On-Tool Battery Fuel Gauge
Soft-Grip Handle
Includes: 2 Batteries, Charger, Left/Right Side
Assist Handle and Carrying Case.
To Order Additional Battery Packs:
Reference model # SB18B (18V Battery)
Charger: SC118B - 1-Hour Charger
2866-02/03
18V
Drill/Driver
•
•
•
•
•
Forward/Reverse Indicator
Bit Index
Variable Speed
On-Tool Bit Storage
Battery Charge Indicator
6267-04
Includes:
• 2895 – 2-Speed Drill/Driver
- Up to 400 IN/LBS of Torque
• 4570 - Orbital Jigsaw
• 2897 - Pivoting Head Flashlight
• 5850 - 7-1/4” Full-Size Skilsaw®
• 2 Batteries with Battery Fuel Gauge
• 1-Hour Charger
• Carrying Bag
3/8"
Drill/Driver
•
•
•
•
•
•
•
•
5.5 Amp Motor
2-Finger Variable Speed Trigger
3/8” Keyless Chuck
Ergonomic Two-Hand Soft Grip
On Board Removable Bit Index
Built-in Work Light
Built-in Level
On Board Bit Storage
Includes: Double-Ended
Bit and Carrying Case
To Order Additional Battery Packs:
Reference model # SB18B (18V Battery)
66 Series
Features
95 SERIES
Corded Drill/Drivers
Cordless Combos Kits
Picking the right drill/driver to meet your needs:
To Order Additional Battery Packs:
Reference # - SB18A 18V Slide
Pack Battery
Charger: SC118 - 1-Hour Charger
6237-04
3/8"
Drill/Driver
•
•
•
•
•
•
5.0 Amp Motor
2-Finger Variable Speed Trigger
3/8” Keyless Chuck
Built-in level
On Board Bit Storage
On Board Removable Bit Index
Includes: Double-Ended Bit
2887-16
18V Cordless
5-Tool Combo Pack
Screwdrivers
Includes:
•
•
•
•
•
•
•
2887 - 2-Speed Drill/Driver
5850 - 7-1⁄4" Skilsaw®
9350 - Full-Size Reciprocating Saw
2890 - Flashlight
Two Batteries
1-Hour Charger
Carrying Bag
To Order Additional Battery Packs:
Reference # - SB18A 18V Slide
Pack Battery
2348
4.8V Twist®
Screwdriver
• 2-Position Design – pistol and
in-line design in one tool
• Forward/Reverse Indicators
• Built-in Work Light
• Ergonomic Soft-grip Handle
• 2-Finger Trigger for added control
• Accepts 1/4” Hex Bits
Includes: 1 Charger and 2 Driver Bits
Charger: SC118 - 1-Hour Charger
Includes: 1 Battery, 3-Hour Charger
and Carrying Case
On-Tool Stud Finder
Included in 03 Model
To Order Additional Battery Packs:
Reference # - 180BAT (18V Battery)
Charger: SC7218 - 3-Hour Charger
2566-02/03
14.4V
Drill/Driver
•
•
•
•
•
Forward/Reverse Indicator
Bit Index
Variable Speed
On-Tool Bit Storage
Battery Charge Indicator
Includes: 1 Battery, 3-Hour Charger
and Carrying Case
On-Tool Stud Finder
87 SERIES
Included in 03 Model
To Order Additional Battery Packs:
Reference # - 144 BAT (14.4V Battery)
Charger: SC7218 - 3-Hour Charger
2887-05
18V
Drill/
Driver
•
•
•
•
•
•
2-Speed Gear Box: 0-400 RPM, 0-1,250 RPM
Forward/Reverse Indicators
2-Finger Variable Speed Trigger
Battery Charge Indicator
Side Assist Handle
Bit Index
Includes: 2 Batteries, 1-Hour Charger
and Carrying Case
To Order Additional Battery Packs:
Reference # - SB18A 18V Slide Pack Battery
Charger: SC118 - 1-Hour Charger
2466-02
12V
Drill/Driver
•
•
•
•
•
Forward/Reverse Indicator
Bit Index
Variable Speed
On-Tool Bit Storage
Battery Charge Indicator
Includes: 1 Battery, 3-Hour
Charger and Carrying Case
To Order Additional Battery Packs:
Reference # - 120 BAT (12V Battery)
Charger: SC7218 - 3-Hour Charger
4
For project ideas and tips: www.skil.com
5
CUTTING
BUILDING A MERICA
FOR
CUTTING
OVER 80 YEARS!
5780-01
7-1/4” Skilsaw®
The Skil Vision
From 1927:
“We offer to the trade a product
proven in the hands of users, not
down to a price but up to a
standard of quality in design,
material and workmanship.”
* Available 6/2008
5680-01
7-1/4” Skilsaw
Developments and introductions to the ever-increasing variety of
hand-held electric power tools have led to the extensive line of Skil ® power
tools and accessories found in this catalog. Skil products are designed to
meet the needs of a demanding market and are manufactured with the
commitment to quality and value established with our Skilsaw ® circular saw.
Every product of the growing line of Skil tools and accessories is the result of
extensive end-user research, consumer input, computer-assisted design and
rigorous testing, both in our laboratories and in the field.
7-1/4”
Skilsaw®
HD5860
* Available 7/2008
SHD77
7-1/4"
Worm Drive
Skilsaw®
Includes: 24-Tooth Carbide Blade,
Saw Hook and Wrench
•
•
•
•
•
•
•
•
•
•
•
15 Amp Motor
Worm Drive Gears
51° Bevel with 45° Stop*
New Two-Position Saw Hook
Die Cast Housings
Patented Anti-Snag Lower Guard
20 Amp AC/DC Switch
Durable Steel Foot
Push-Button Spindle Lock
Oil Indicator and Relief Bellows
Available with Twist Lock
Cord – Model SHD77-72
Includes: 24-Tooth Carbide Blade,
Saw Hook and Wrench
2.5 HP (Max. Motor), 13 Amp
Built-in Work Light
Grip-Right™ Handle
Accu-Sight ™ Cut Line Guide
Patented Anti-Snag
Lower Guard
• Safety Lock/Guarded Trigger
Includes: 18-Tooth Carbide
Blade and Wrench
8-1/4"
Worm Drive
Skilsaw®
•
•
•
•
•
•
•
13.0 Amp Motor
60° Bevel
Worm Drive Gear
Aluminum Body
Durable Steel Foot
20 Amp AC/DC Switch
Cuts 2X lumber at 60º in one pass
Includes: 24-Tooth Carbide Blade
and Wrench
HD5825
6-1/2"
Worm Drive
Skilsaw®
• 12.0 Amp Motor
• Worm Drive Gear
• Oil Indicator Level and
Relief Bellows
• Aluminum Body
• Durable Steel Foot
• 20 Amp AC/DC Switch and
Heavy Gauge Cord
Includes: 36-Tooth Steel
Combination Blade and Wrench
HD5510
5-1/2" Trim
Skilsaw®
•
•
•
•
•
•
•
•
2.5 HP (Max. Motor), 14 Amp
Laser Cutline with On/Off Button
Power-On LED
Patented Anti-Snag Lower Guard
Safety Lock/Guarded Trigger
Rear View Depth-Adjustment
On-Tool Wrench Storage
Ball Bearing Motor Construction
5600-01
7-1/4"
Skilsaw®
•
•
•
•
2.5 HP (Max. Motor), 13 Amp
Grip-Right™ Handle
Accu-Sight™ Cut Line Guide
Patented Anti-Snag
Lower Guard
• Safety Lock/Guarded Trigger
Includes: 18-Tooth Carbide
Blade and Wrench
* Available 6/2008
Visit our homepage and find all you need for your next home project. For
complete, detailed project plans and tips to expert tool advice, skil.com was
created to help you every step of the way.
7-1/4"
Magnesium Worm
Drive Skilsaw®
7-1/4"
Skilsaw®
•
•
•
•
•
Includes: 24-Tooth Carbide Blade,
Wrench and Carrying Case/Bag
5580-01
SHD77M
5650-01
Includes: 24-Tooth Carbide Blade,
Wrench and Carrying Case/Bag
®
• 15 Amp Motor
• Worm Drive Gears
• Magnesium Body Die Cast
Magnesium Housings
• 51° Bevel with 45° Stop*
• Aluminum Foot
• New Two-Position Saw Hook
• Die Cast Housings
• Patented Anti-Snag Lower Guard
• 20 Amp AC/DC Switch
• Push-Button Spindle Lock
• Oil Indicator and Relief Bellows
• Available with Twist Lock
Cord – Model SHD77M-72
• 2.6 HP (Max. Motor), 15 Amp
• LASERX2 2-Beam Laser with On/Off
Button
• Grip-Right™ Soft-Grip Handle
• Power-On LED
• Spindle Lock
• Patented Anti-Snag Lower Guard
• Safety Lock/Guarded Trigger
• Rear View Depth-Adjustment
• On-Tool Wrench Storage
• Ball Bearing Motor Construction
•
•
•
•
•
•
6.5 Amp Motor
Helical Gear
Built-in Scales
Cutting Guide
Ball-Bearing Construction
Durable Steel Foot
•
•
•
•
•
•
•
2.4 HP (Max. Motor), 13 Amp
Accu-Sight™ Cut Guide System
Patented Anti-Snag Lower Guard
Safety Lock/Guarded Trigger
Rear View Depth-Adjustment
On-Tool Wrench Storage
Ball Bearing Motor Construction
5500-01
7-1/4"
Skilsaw®
•
•
•
•
2.4 HP (Max. Motor), 13 Amp
Grip-Right™ Handle
Accu-Sight™ Cut Line Guide
Patented Anti-Snag
Lower Guard
• Safety Lock/Guarded Trigger
Includes: 40-Tooth Steel
Blade and Wrench
Includes: 24-Tooth Carbide Blade,
Wrench and Carrying Case/Bag
* Available 4/2008
5480-01
7-1/4"
Skilsaw®
*than previous model 5400-01
5750-01
7-1/4"
Laser
Skilsaw®
• 2.3 HP (Max Motor), 13 Amp
• 20% Wider Foot Plate*
for increased stability
• Patented Anti-Snag Lower Guard
• Rear Depth Adjustment Lever
• Safety Lock/Guarded Trigger
• Two-Point Line of Sight
• On-Tool Wrench Storage
• Compact Design - 1/2 lb Lighter*
• Ball Bearing Motor Construction
5450-01
7-1/4"
Skilsaw®
• 2.4 HP (Max. Motor), 13 Amp
• Accu-Sight™ Cut Line Guide
• Patented Anti-Snag
Lower Guard
• Safety Lock/Guarded Trigger
Includes: 40-Tooth Steel
Blade, Wrench and
Carrying Case
Includes: 18-Tooth Carbide Blade
and Wrench
•
•
•
•
•
•
2.5 HP (Max. Motor), 13 Amp
Laser Cutline
Grip-Right™ Handle
Patented Anti-Snag Lower Guard
Spindle Lock
Safety Lock/Guarded Trigger
5400-01
7-1/4"
Skilsaw®
• 2.3 HP (Max. Motor)
12 Amp
• Anti-Snag Lower Guard
• Safety Lock-off Switch
Includes: 20-Tooth Steel
Blade and Wrench
Includes: 18-Tooth Carbide
Blade, Wrench and
Carrying Case/Bag
Includes: 36-Tooth Steel
Combination Blade and Wrench
* Available 7/2008
6
For project ideas and tips: www.skil.com
7
CUTTING/GRINDING/PLANING
Jigsaws
9205-01
4690-01
•
•
•
•
•
•
•
•
Laser Guided
Orbital Cut
Scrolling
Jigsaw
6.0 Amp Motor
Integrated Work Light & Laser Guide
360° Scrolling Action
Precision Blade Guide System
2-Finger Variable Speed Trigger
4-Position Orbital Cut Control
Tool-less Foot Adjustment
Soft-Grip Handle
Includes: 2-Blade Pack and
Carrying Case
4490-01
•
•
•
•
•
Orbital
Cut
Scrolling
Jigsaw
5.0 Amp Motor
360° Scrolling Action
4-Position Orbital Cut Control
Soft-Grip Handle
Variable Speed Dial
Includes: 2-Blade Pack and
Carrying Case
4390-01
•
•
•
•
•
•
•
•
•
•
•
Orbital
Cut Jigsaw
5.0 Amp Motor
Built-In Work Light
Open Foot Design/Dust Blower
Tool-less Blade Changes
Durable Metal Gear Box
4-Position Orbital Cut Control
Variable Speed Dial
Soft-Grip Handle
2-Finger Trigger with Lock-On
Tool-less Foot Adjustment
Vacuum Port/Blade Storage
Includes: 2-Blade Pack and
Carrying Case
Reciprocating Saw
Variable
Speed
Jigsaw
Includes: 1 Blade
Grinders
Orbital
Reciprocating Saw
Includes: 1 Blade and Carrying Bag
9215-01
Reciprocating Saw
•
•
•
•
•
•
•
•
8.5 Amp Motor
Variable Speed Dial
800-2,700 SPM
On-Tool Power Indicator
Tool-less Blade Change
Adjustable Pivoting Shoe
Soft-Grip Handle and Boot
On-Tool Blade Storage
Microfiltration – Contains the
Dust that a Bag Can’t
The SKIL 7500 Belt Sander features the Autotrack Control™ belt alignment system which
keeps the belt running in the center of the pulleys. When your belt starts to wander when
sanding,simply pick the tool up and the system automatically re-aligns the sanding belt on
the tool.
Dust bags collect dust. The Microfilter Canister is an integral dust extraction system
that collects and contains even fine dust particles. Delivering a cleaner work surface
and minimizing air-born particles each time it’s used. Look for the Microfiltration system
on several of the SKIL sanders and be confident that your work area will remain as
clean as possible.
7500-01
3” x 18”
Belt
Sander
SKIL’s small angle
grinders grind and sand
their way through your
abrasive materials.
Ideal for metal, asphalt, stone
and other tough materials,
these tools are designed to
help get your job done. Look for a selection of diamond blades and abrasive
wheels designed to help you achieve project success.
9330-01
Rat-Tail Angle
Grinder
Routers
Sanders
Grinding
and
Sanding
•
•
•
•
•
6.5 Amp Motor
Quick-Release Guard
Soft-Grip Side Assist Handle
Lock-on Switch
Dual On/Off Switch - for Barrel or
Rear-Handle Operation
• Spindle Lock
• Heavy Duty Metal Gear Housing
•
•
•
•
•
•
•
•
6.0 Amp Motor
Patented Auto Track Belt Alignment
Micro-Filter Dust Canister
Flush Edge Sanding
Attachment for Wet/Dry Vac
Soft-Grip Handles
Trigger Lock-on
Single-Lever Belt Changes
•
•
•
•
•
•
6.0 Amp Motor
Grinds, Sands, Sharpens
Heavy Duty Metal Gear Housing
Quick-Release Guard
2-Position Side Assist Handle
Spindle Lock
2-1/4 HP Router
Combo Kit
• 2 1⁄4 HP, 11 Amp Motor
• Interchangeable Fixed and
Plunge Base
• Micro-Fine Depth Adjustment
• Variable Speed
• Quick-Change Collet
• 2" Plunge Depth
• Built-in Work Light
• Soft-Grip Handles
Includes: 1/4” Collet, 1/2”
Collet, Wrench and
Carrying Bag
7490-01
5” Random
Orbit
Sander
•
•
•
•
•
•
2.6 Amp Motor
Micro-Filter Dust Canister
Soft-Grip
Dust Sealed Switch
All Ball-Bearing Construction
Pad Break - Controls Speed
for Consistency
Includes: 3 Sanding Discs and
Carrying Bag
1820
2 HP
Plunge
Router
•
•
•
•
•
•
2 HP, 10 Amp Motor
Built-in Work Light
Micro-Fine Depth Adjustment
Quick-Change Collet
2" Plunge Depth
Soft-Grip Handles
Includes: 1/4” Collet,
Wrench and Carrying Bag
7300-01
9290-01
1825
Includes: 3” x 18” Sanding Belt
Includes: 4-1/2” Grinding Wheel,
Wrench and Carrying Bag
Reciprocating Saws
9225-01
Keep projects on track with the SKIL
Patented AUTOTRACK CONTROL™ SYSTEM
This feature saves you time, eliminating the need to manually re-adjust the belt, and prevents
inconsistencies in the surface that emerge when the belt starts to wander off track.
Grinder
• 9.5 Amp Motor
• Orbital Action Selector allows for
Straight or Orbital Cutting
• Removable Blade Storage
• Soft-Grip Handle and Boot
• Power-On LED
• Variable Speed Dial
• Adjustable Pivoting Shoe
• Tool-less Blade Change
8.5 Amp Motor
Variable Speed Dial
800-2,700 SPM
Adjustable Pivoting Shoe
Integrated Blade Storage
Includes: 3 Ugly® blades
• 4.5 Amp Motor
• Tool-less Blade Change System Accepts T and U Shank Blades
Active Dust Blower
• On-Tool Blade Storage
• Ergonomically-Designed Handle
• Two-Finger Trigger
4290-02
•
•
•
•
•
WOODWORKING
Octo
Multi-Finishing
Sander
Includes: 4-1/2” Grinding Wheel
and Wrench
• 8 Detail Sanding Attachments:
Finger, Slot, Outside Corner, Inside
Corner, Concave, Extended Delta,
3-Position Nose Detail, and an
Innovative Flexible Attachment
• Built-in Work Light
• Dust Sealed Switch
• Dust Canister
• Tool-less Attachment System
Includes: 32 Sandpaper Sheets
and Carrying Bag
1815
2 HP
Fixed-Base
Router
•
•
•
•
•
•
•
2 HP, 10 Amp Motor
Built-in Work Light
Micro-Fine Depth Adjustment
Quick-Change Collet
Soft-Grip Handles
Easy to read Depth Scale
Chip Deflector
Includes: 1/4” Collet,
Wrench and Carrying Bag
Planer
1560
3-1/4” Planer
•
•
•
•
•
•
5.5 Amp Motor
Adjustable Auxiliary Handle
Left and Right-Handed Controls
Spring-Loaded Foot Park
Machined Front and Rear Shoes
11-Position Depth Control Knob Micro-Adjustments (0-5/64”)
• On-Board Wrench Storage
• Two Reversible Carbide Blades
7290-01
1/4 Sheet
Palm
Sander
•
•
•
•
•
•
2.0 Amp Motor
Soft-Grip
Easy Quick-Mount Clamps
Micro Filter Dust Canister
Dust Protected Switch
All Ball-Bearing Construction
Includes: 3 Sandpaper Sheets
and Punch Plate
1810
1-3⁄4 HP
Fixed-Base
Router
•
•
•
•
•
•
1-3/4 HP, 9 Amp Motor
Micro-Fine Depth Adjustment
Quick-Change Collet
Soft-Grip Handles
Easy to read Depth Scale
Chip Deflector
Includes: 1/4” Collet
and Wrench
Includes: Edge and Rabbet Guides,
Chip Bag, Wrench and Carrying Bag
Includes: 3 Ugly® Blades and
Carrying Bag
8
For project ideas and tips: www.skil.com
9
BENCHTOP
Benchtop
3800-01
10" Compound
Miter Saw
Benchtop
• "Industry First" Two Beam
Motion Activated Laser
• 2.5 HP (Max. Motor), 15 Amp
• Crown Stops (2)
• Vertical Clamp
• Table Extension
• Left and Right Extension Rails (2)
• 9 Positive Stops
(0, 15, 22.5, 31.6, 45) - Left/Right
Includes: 40-Tooth Carbide Blade,
Sliding Fence, Dust Bag, Elbow and
Blade Wrenches
3800-02
10” Compound
Miter Saw
WORK STATION
• 2.5 HP (Max. Motor), 15 Amp
• Laser Cutline Single Beam Laser for
accurate cuts
• 9 Positive Stops (0, 15, 22.5, 31.6,
45 - Left/Right)
• Vertical Clamp
• Table Extension
• Left and Right Extension Rails (2)
ACCESSORIES
3100-12
Work Station
• Integrated Cross-Cut Channel
• Durable MDF (medium density fiberboard)
Work Surface
• 25” Ruler Markings on the MDF surface
• Power Outlet with a Bump-Off Switch accepts
both male and female plugs
• Folds in half for easy storage and portability
• Independently Adjustable Steel Legs (24" - 34")
• Universal Insert Plate System
• Skid-Resistant Rubber Feet
3100-04: Tail Vise
3100-05: Downdraft Table
3100-06: Clamping Kit
• Clamping system that attaches to the
X-Bench table
• Secures larger material to the end of the
work station
• Quick Release Clamping Knob provides easy
clamping and releasing of work pieces to the
X-Bench
• Eliminates dust from work station area
while sanding
• Sanding Platform quickly and securely fastens to
X-Bench using the insert plate system Vacuum
Attachment on the underside of the platform
• Attaches the table to a shop vacuum hose
• Open holes on the downdraft table allow dust
particles to be extracted through the worktable
when the shop vacuum is running
• Assortment of clamps that can be used to secure
material to the X-Bench work surface
• Includes: 4 Wedge Dog Clamps, 2 Spring Clamps,
2 Horizontal Clamps and a Storage Bag
3100-07: Retractable
Shelf and Tool Bag
3100-08: Finishing Tray
3100-09: Jigsaw Insert Plate*
• Converts X-Bench into Finishing Station,
providing convenient storage for paint, brushes,
paper towels, a tape roll and other items
• Converts X-Bench Work station into Scroll Saw
• Attach Jigsaw to insert plate**, place insert plate
into universal plate opening and secure to the
X-Bench table
3100-10: Sanding Insert Plate*
3100-11: Router Insert Plate*
3100-DP: Drill Press*
• Converts X-Bench Work station into a
Sanding Station
• Attach Belt Sander to insert plate**, place insert
plate into universal plate opening and secure
to the X-Bench table
• Converts X-Bench Work station into a
Router Table
• Attach Router to insert plate**, place insert
plate into universal plate opening and secure to
the X-Bench table
• Converts X-Bench Work station into Drill Press
• Provides precise drilling - ideal for fine
woodworking
• Attach 1/2” Corded Drill** to drill press, attach
press to universal plate opening and secure to the
X-Bench table
Includes: Universal Insert Plate, 2 Wedge Dogs and Power Switch
Includes: 40-Tooth Carbide Blade,
Dust Bag and Elbow, Blade Wrenches
*Available 6/2008
2100DAF
Digital Angle Finder
3400-15
10" Table Saw
• Easy To Read LCD Panel
• Calculates Miter Angles with
up to .5º Accuracy
• Hold Button Saves Measurement
• Miter Button Automatically
Calculates Miter Cut Angles
• Horizontal and Vertical Bubble Levels
• Die-Cast Ruler
• Automatic Shut-Off
•
•
•
•
•
•
•
• Under-table storage for commonly used
materials, tools and accessories
• Shelf and bag fasten below the table when in use
and fold flat when the X-Bench is being stored or
transported
3 HP (Max. Motor), 15 Amp Motor
5000 RPM
Die-Cast Miter Gauge
45º Degree Max. Bevel Cut
Rear Outfeed Support
Side Extension
Dust Bag
Integrated
Cross-cut Channel
Includes: 28-Tooth Carbide Blade and
Heavy-Duty Steel Stand
3400-08
10" Table Saw
Table opens to expose
the cut channel, providing
support on both sides of
material being cut.
Easy Storage &
Portability
•
•
•
•
•
•
3 HP (Max. Motor) 15 Amp
5,000 RPM
Die-Cast Miter Gauge
45° Max. Bevel Cut
Self-Aligning Rip Fence
On-Tool Storage for Miter
Gauge, Rip Fence and Blade
Includes: 28-Tooth Carbide
Blade and Heavy-Duty Stand
* Insert Plates fit most jigsaws, router and belt sanders. Please visit www.skil.com or call 877-SKIL999 for a complete list of compatible products.
** Hardware for attaching tool to plate is included.
10
For project ideas and tips: www.skil.com
11
ACCESSORIES
Drilling & Driving
ACCESSORIES
Drilling & Driving
Multi-Purpose
Saw Blade Sets
Item #
12
Description
Item #
Description
90023
23 pc set includes 17 multi-purpose drill bits, 6 spade bits, and a heavy
duty case.
90041CSB
41 pc set includes 14 multi-purpose drill bits, 3 nutdrivers, 22 insert bits, saw blade, magnetic screwguide, and
heavy duty case with room for 4 additional circular saw blades.
90027
27 pc set includes 7 multi-purpose drill bits, 4 nut drivers, 10 insert
bits, 5 power bits, convenient quick change adapter, and soft pouch.
90051CSB
51 piece set includes 16 multi-purpose drill bits, 5 masonry bits, 3 nutdrivers, 18 insert bits, 6 power bits, 2
circular saw blades, magnetic screwguide, and heavy duty case with room for 3 additional circular saw blades.
90033
33 pc set includes 7 multi-purpose drill bits, 6 brad point bits, 5 masonry bits, 3
nutdrivers, 10 insert bits, countersink, magnetic bit holder, and case.
99099
99 pc set includes 26 multi-purpose bits, 7 brad point bits, 6 masonry bits, 3 spade bits, 40 insert bits, 10 power bits,
5 nutdrivers, magnetic bit holder, saw blade, and soft pouch.
90042
42 pc set includes 15 multi-purpose drill bits, 6 nutdrivers, 14 insert bits, 6
power bits, magnetic bit holder, heavy duty case, and bonus 10' tape measure.
Quick Change Sets
Item #
Description
90044
44 pc set includes 9 multi-purpose drill bits, 5 masonry bits, 4 nutdrivers,
20 insert bits, 5 power bits, magnetic screw guide, and soft pouch.
90730
30 pc set includes 7 multi-purpose drill bits, 3 nutdrivers, 10 insert bits, 7 power bits, socket adapter, magnetic bit
holder, convenient quick change adapter, and heavy duty case.
90055
55 pc set includes 20 multi-purpose drill bits, 4 nutdrivers,
20 insert bits, 10 power bits, compact screw guide, and soft pouch.
90918
18 pc set includes 5 multi-purpose drill bits, 6 insert bits, 5 power bits, magnetic bit holder, convenient quick change
adapter, and heavy duty case.
90058
58 pc set includes 17 multi-purpose drill bits, 7 nutdrivers, 25 insert bits, 8
power bits, magnetic bit holder, and heavy duty case.
90921
21 pc set includes 7 multi-purpose drill bits, 7 insert bits, 5 nutdrivers, screw guide, convenient quick change adapter,
and heavy duty case.
90068
68 pc set includes 13 multi-purpose drill bits, 6 nutdrivers, 40 insert bits, 8
power bits, magnetic bit holder, and heavy duty case.
90942
42 pc set includes 10 multi-purpose drill bits, 4 nutdrivers, 15 insert bits, 10 power bits, socket adapter, screw
finder, convenient quick change adapter, and heavy duty case.
90083
83 pc set includes 17 multi-purpose drill bits, 4 brad point bits, 5 masonry bits,
31 insert bits, 8 nutdrivers, 5 spade bits, 4 hole saws, 4 depth guides,
hole saw mandrel, nail punch, Allen® wrench, countersink, magnetic bit holder,
and heavy duty case.
90084
84 pc set includes 19 multi-purpose drill bits, 50 insert bits, 8 power bits, 6
nutdrivers, magnetic bit holder, and heavy duty case.
90100
100 pc set includes 24 multi-purpose drill bits, 58 insert bits, 8 power bits,
6 nutdrivers, countersink, magnetic bit holder, 2 depth stops, and heavy
duty case.
90117
117 pc set includes 21 multi-purpose drill bits, 13 brad point bits, 5 masonry
bits, 10 nutdrivers, 50 insert bits, 13 power bits, 2 finders, countersink,
magnetic bit holder, ratcheting hand driver, and heavy duty case.
90119
119 pc set includes 21 multi-purpose drill bits, 13 brad point bits, 6
masonry bits, 6 nutdrivers, 50 insert bits, 14 power bits, 4 depth stop
guides, 2 finders, countersink, magnetic bit holder, Allen® wrench, and
heavy duty case.
Gold Oxide Drill Bit Sets
Item #
Description
98013
13 pc set includes bit sizes 1/16"–1/4" in 1/64" increments. Compact metal case included
for convenient tool box storage.
98015
Set includes 15 drill bits and a heavy-duty plastic case for convenient tool box storage.
98017
Set includes 17 drill bits and a heavy-duty plastic case for convenient tool box storage.
98029
29 pc set includes bit sizes 1/16"–1/2" in 1/64" increments. Metal index case for storage and
convenient bit selection.
High Speed Steel Drill Bit Sets
Item #
Description
45110
13 pc set includes bit sizes 1/16"–1/4" in 1/64" increments. Clear view case for convenient bit selection
and organization.
45173
13 pc set includes bit sizes 1/16"–1/4" in 1/64" increments. Metal index case for storage and convenient bit selection.
158 pc set includes 35 multi-purpose bits, 11 brad point bits, 9 masonry
bits, 2 spade bits, 75 insert bits, 17 power bits, 7 nutdrivers, magnetic bit
holder, countersink, and soft pouch.
45175
Set includes 21 bits and a clear view case for convenient bit selection and organization.
97158
45176
Set includes 21 bits and a metal index case for storage and convenient bit selection.
97200
200 pc set includes 37 multi-purpose bits, 12 brad point bits, 18 masonry
bits, 5 spade bits, 90 insert bits, 25 power bits, 10 nutdrivers, magnetic bit
holder, countersink, finder driver, and soft pouch.
90010
Set includes 10 bits and 2 bonus double-ended screwdriver bits. Heavy-duty plastic case included for
convenient tool box storage.
96013
13 pc set includes bit sizes 1/16"–1/4" in 1/64" increments. Heavy-duty plastic case included for convenient
tool box storage.
96020
Set includes 20 drill bits and a heavy-duty plastic case for convenient tool box storage.
96021
Set includes 21 drill bits and a heavy-duty plastic case.
96029
Set includes 21 bits and a metal index case for storage and convenient bit selection.
98034
34 pc set includes 6 multi-purpose drill bits, 3 masonry bits,
4 nutdrivers, 20 insert bits, magnetic bit holder, and soft pouch.
98087
87 pc set includes 17 multi-purpose bits, 9 brad point bits, 3 masonry bits,
40 insert bits, 10 power bits, 6 nutdrivers, magnetic bit holder, countersink,
and soft pouch.
For project ideas and tips: www.skil.com
13
ACCESSORIES
ACCESSORIES
Drilling & Driving
Drilling & Driving
Driving Sets
Item #
Description
45103
59 piece set includes 40 insert bits, 11 power bits, 7 nutdrivers, and magnetic bit holder in a heavy duty case.
47110
10 pc set includes Phillips® insert bits sizes #0, #1 (2 bits), #2 (5 bits), and #3 (2 bits).
47111
Other Sets
Item #
Description
45606
6 pc spade bit set includes bit sizes 3/8", 1/2", 5/8", 3/4", 7/8", and 1".
10 pc set includes slotted insert bits sizes 4-5, 6-8 (2 bits), 8-10 (5 bits), 10-12, and 12-14.
93005
5 pc set includes hole saw mandrel and cup sizes 1-1/4", 1-1/2", 1-3/4", and 2-1/8".
47112
10 pc set includes insert bits sizes Phillips® #0, #1, #2 (2 bits), and #3; slotted 4-5, 6-8, 8-10, 10-12, and 12-14.
95813
13 pc set includes bit sizes 1/4"–1" in 1/16" increments.
47113
10 pc set includes square recess insert bit sizes #0 (2 bits), #1 (2 bits), #2 (4 bits), and #3 (2 bits).
47114
10 pc set includes Torx® insert bit sizes TX10, TX15 (2 bits), TX20, TX25 (2 bits), TX27, TX30 (2 bits), and TX40.
47116
5 pc set includes Phillips® 2" power bits ideal for high torque jobs in sizes #0, #1, #2 (2 bits), and #3.
47117
5 pc set includes slotted 2" power bits ideal for high torque jobs in sizes 4-5, 6-8, 8-10, 10-12, and 12-14.
47118
5 pc set includes square recess 2" power bits ideal for high torque jobs in sizes #0, #1, #2 (2 bits), and #3.
47119
5 pc set includes versatile double ended bits ideal for multiple jobs in Phillips® sizes #0, #1, #2 (2 bits), and #3;
slotted sizes 4-5, 6-8, 8-10 (2 bits), and 10-12.
47275
7 pc set includes 6 insert bits and magnetic bit holder.
47276
10 pc nutdriver set ideal for power driving hex head screws, bolts, and nuts.
47277
12 pc finder / driver set includes 10 insert bits fitting the most common screw heads. Set also includes magnetic
screw guide and 1/4" socket adapter.
47278
19 pc set includes 11 insert bits, 7 sockets, and magnetic bit holder with screwguide in a convenient storage
case with belt clip.
89012
Circular Saw Blades
Worm Drive Blade
Item #
Inch
# of Teeth
Application
Quantity
76924
7-1/4"
24
Rip / Cross cuts
1
76924B25
7-1/4"
24
Rip / Cross cuts
25
Titanium Circular Saw Blades
Item #
Inch
# of Teeth
Application
Quantity
75924
7-1/4"
24
Rip / Cross cuts
1
75924B25**
7-1/4"
24
Rip / Cross cuts
25
75940
7-1/4"
40
Cross / Finish cuts
1
12 pc set includes an assortment of convenient 2" power bits.
75940B25*
7-1/4"
40
Cross / Finish cuts
25
89030
30 pc set includes 5 insert bits, 17 power bits and 5 nutdrivers. 1/4" and 3/8" socket adapters and magnetic bit
holder are also included in a heavy duty case.
75918
7-1/4"
18
Rip / Cross Cuts
1
89033
33 pc set includes 32 insert bits and magnetic bit holder.
75918B25
7-1/4"
18
Rip / Cross Cuts
25
90060
60 pc set includes 40 insert bits, 13 power bits, 6 nutdrivers, and magnetic bit holder in a heavy duty case.
** = Bulk Blade
These blades include 5/8" and diamond knock-out arbor.
Carbide Circular Saw Blades
Combination/Specialty Drilling Sets
Item #
Description
Inch
# of Teeth
Application
Quantity
75518*
Item #
5-1/2"
18
Rip / Cross cuts
1
75620
6-1/2"
20
Rip / Cross cuts
1
75718
7-1/4"
18
Rip / Cross cuts
1
75718B25**
7-1/4"
18
Rip / Cross cuts
25
75724
7-1/4"
24
Rip / Cross cuts
1
75724B25**
7-1/4"
24
Rip / Cross cuts
25
75740
7-1/4"
40
Cross / Finish cuts
1
45178
Multipurpose set features an assortment of drill bits for various projects in wood, masonry, plastic and metal:
3 brad point bits for woodworking, 3 masonry bits for brick, and concrete and 13 high speed steel twist drill bits.
46428
Glass & Tile bit set includes 3 carbon steel bits ideal for drilling in glass and tile (including ceramic tile).
Carbide tipped for long life.
93003
Lock Installation kit includes 2-1/8" hole saw, hole saw mandrel, pilot drill bit, and 1" spade bit.
97004
Rotary Hammer set includes 4 bits and a plastic case for convenient tool box storage.
75740B25**
7-1/4"
40
Cross / Finish cuts
25
97005
Masonry set includes 5 bits and a plastic case for convenient tool box storage.
74760B25**
7-1/4"
60
Cross / Finish cuts
25
97009
Masonry set includes 9 bits and a plastic case for convenient tool box storage.
75824
8-1/4"
24
Rip / Cross cuts
1
98009
Set includes 5 precision ground high speed steel drill bits for common projects and 4 carbide tipped masonry bits
for longer life in brick, and concrete applications.
14
* = Includes bushing for 1/2" arbor
** = Bulk Blade
These blades include 5/8" and diamond knock-out arbor.
For project ideas and tips: www.skil.com
15
ACCESSORIES
ACCESSORIES
Circular Saw Blades
Routing
Steel Circular Saw Blades
Item #
1/2” Shank Router Bits
Inch
# of Teeth
Application
Quantity
74501‡
5-1/2"
110
Fine finishing
1
74720‡
7-1/4"
20
Rip / Cross cuts
1
74720B25**
7-1/4"
20
Rip / Cross cuts
74740
7-1/4"
40
74740B25**
7-1/4"
74705
Item #
Type
91701
Finger joint
25
91702
Glue joint
Cross / Finish cuts
1
91703
Lock miter
40
Cross / Finish cuts
25
91704
Ogee stile and rail
7-1/4"
150
Fine finishing
1
74705B25**
7-1/4"
150
Fine finishing
25
74706
7-1/4"
200
Plywood and panel
1
Router Bit Sets
Item #
‡ = Also designed for cutting plywood and paneling, includes bushing for 1/2" arbor
** = Bulk Blade
These blades include 5/8" and diamond knock-out arbor.
Benchtop Circular Saw Blades
Inch
# Of
Teeth
Hook
Angle
Optimized
For
Application
Quantity
Blade
Family
75240
10"
40
15˚
Table Saw
Rip / Cross cuts
1
Titanium
75260
10"
60
12˚
Table / Miter
Cross / Finish cuts
1
Titanium
75128
10"
28
20˚
Table Saw
Rip / Cross cuts
1
Carbide
75128B10**
10"
28
20˚
Table Saw
Rip / Cross cuts
10
Carbide
75140
10"
40
12˚
Table / Miter
Rip / Cross cuts
1
Carbide
75140B10**
10"
40
12˚
Table / Miter
Rip / Cross cuts
10
Carbide
75160
10"
60
12˚
Table / Miter
Cross / Finish cuts
1
Carbide
75160B10**
10"
60
12˚
Table / Miter
Cross / Finish cuts
10
Carbide
71240B10**
12"
40
12˚
Table / Miter
Rip / Cross cuts
10
Carbide
71260B10**
12"
60
12˚
Table / Miter
Cross / Finish cuts
10
Carbide
74102‡
10"
200
N/A
Table / Miter
Fine finishing
1
Steel
Item #
‡ = Also designed for cutting plywood and paneling
** = Bulk Blade
Description
91001 - 3 pc Carbide
Straight Bit Set
Set includes 1/4", 1/2", and 3/4" straight router bits.
91002 - 3 pc Carbide
Roundover Bit Set
Set includes 1/4", 3/8", and 1/2" roundover router bits. Hex key and 1/2" replacement
bearing also included.
91003 - 3 pc Carbide
Decorative Edge
Bit Set
Set includes 1/4" roundover bit, 1/4" cove bit, and 5/32" roman ogee bit. Hex key and 1/2"
replacement bearing also included.
91006 - 6 pc Carbide
Router Bit Set
Set includes 3 straight bits, roundover bit, roman ogee bit, corebox bit, replacement bearing, and
hex key.
91012 - 12 pc Carbide
Router Bit Set
Set includes 3 straight bits, v-groove bit, corebox bit, dovetail bit, laminate trim bit, 2 roundover bits,
cove bit, roman ogee bit, chamfer bit, replacement bearing, and hex key.
91015 - 15 pc Carbide
Router Bit Set
Set includes 3 straight bits, v-groove bit, corebox bit, 2 dovetail bits, 2 roundover bits, beading bit,
2 cove bits, 2 roman ogee bits, chamfer bit, replacement bearing, and hex key.
91018 - 18 pc Carbide
Router Bit Set
Set includes 3 straight bits, 2 v-groove bits, corebox bit, 2 dovetail bits, laminate trim bit, 4 roundover
bits, cove bit, 2 roman ogee bits, chamfer bit, rabbeting bit, replacement bearing, and hex key.
91024 - 24 pc Carbide
Router Bit Set
Set includes 4 straight bits, hinge mortising bit, panel pilot bit, v-groove bit, 2 corebox bits, ovolo bit,
2 dovetail bits, keyhole bit, laminate trim bit, 4 roundover bits, 2 cove bits, roman ogee bit, chamfer bit,
rabbeting bit, half round bit, replacement bearing, and hex key.
91030 - 30 pc Carbide
Router Bit Set
Set includes 4 straight bits, 2 dovetail bits, ogee bit, hinge mortising bit, keyhole bit, ogee bit with fillet,
panel pilot bit, laminate trim bit, cove and bead bit, v-groove bit, 4 roundover bits, chamfer bit, 2
corebox bits, 3 cove bits, rabbeting bit, classical bit, 2 roman ogee bits, half round bit, ovolo bit,
replacement bearing, and hex key.
Diamond Blades
Diamond Blades
Inch
# of Teeth
Application
Quantity
79506
Item #
4-1/2"
Segmented
Brick, concrete, and masonry
1
79507
4-1/2"
Turbo
Brick, concrete, and masonry
1
79508
4-1/2"
Continuous
Tile, stone, and porcelain
1
79509
7"
Segmented
Brick, concrete, and masonry
1
79510
7"
Turbo
79511
7"
Continuous
Brick, concrete, and masonry
Tile, stone, and porcelain
1
1
for additional accessories,
free project plans, tool tips, and more
16
For project ideas and tips: www.skil.com
17
ACCESSORIES
Routing
ACCESSORIES & WARRANTY
Jigsaw Blades
Router Tables
Item #
Description
RAS450 Standard
Router Table
RAS570 Large
Router Table
Jigsaw Blade Sets
Item #
450 square inches of work surface.
570 square inches of work surface supports larger
workpieces for more advanced woodworking.
Router Accessories
Item #
Description
94743
3 pc set includes The Ugly® jigsaw blades for wood, metal and all-purpose cutting.
Patented Progressive tooth design for cutting thick and thin material with a single blade.
Solid Shank™ construction reduces breakage.
94905
5 pc set includes jigsaw blades for scroll, fine and fast cutting in wood, smooth
cutting in metal and multi-purpose cutting in plastic and composite materials.
Description
91801 Deluxe
Edge Guide
Handy for making straight and circular cuts. Includes provision for trammel point for routing circles.
Features graduations and pointer for fine adjustments. For models 1810, 1815, 1820, 1823,
1825, and 1835.
94910
10 pc set includes jigsaw blades for scroll, fine and fast cutting in wood, smooth, and fast
cutting in thick and thin metal and multi-purpose cutting in plastic and composite materials.
91803 Template
Guide Adapter Plate
Accepts threaded-style template guides to allow router to be used on a variety of fixtures and
other accessories. Includes screws for attachment to router. For models 1823, 1835, 1840, and 1845.
94916
RAS140 Template
Guide Adapter
Accepts threaded-style template guides to allow router to be used on a variety of fixtures and other
accessories. Includes screws for attachment to router. For models 1810, 1815, 1820, and 1825.
16 pc set includes 6 blades for fine, fast and scroll cutting in wood, 5 blades for smooth
and fast cutting in metal, and 3 blades for multi-purpose cutting in plastic and composite
materials. Additional blades included for plaster and drywall and smooth cutting in soft
materials such as leather or vinyl.
91804 Hinge
Template Set
Useful when mortising door and jamb for 3-1/2" and 4" hinges. Use with a router that has been
fitted with a 5/8" guide bushing and 1/2" straight or mortising bit.
91805 Router Letter
Template Set
Designed for accurately routing nameplates and signs. Alignment and letter location are effortless
with the self-spacing method of lettering.
91812 Vacuum
Attachment
Adapts dust hose to Skil routers to allow use with a shop vacuum. For models 1823, 1835,
1840, and 1845-44.
RAS130 Vacuum
Attachment
Adapts dust hose to Skil routers to allow use with a shop vacuum. Accepts 1-1/4" and 1-1/2" hoses.
For models 1810, 1815, and 1825.
RAS100
2 pc Push Shoe Set
Helps control a wide variety of workpiece sizes. Bit height and miter gauges are built in for added
convenience and a hold down stick is also included.
RAS110 Router Table
Work Light
Features 18" flexible neck, 6' electrical cord, built-in switch, and bulb guard. Includes both
permanent and temporary mounts.
RAS120 Router Mat
Over 860 square inches of sure grip surface keeps workpiece in position. Soft washable material
will not mar workpiece.
Recip Blades
®
The Ugly Bi-metal Reciprocating
Saw Blades
Jigsaw Blades
®
The Ugly Jigsaw Blades
Item #
Description
Quantity
94610C2
2-3/4" high speed steel blades with 5-10 TPI for multi-purpose cutting in plastic and composite materials.
2
94738C2
3-1/8" high carbon steel blades with 8-10 TPI for fast cuts in wood.
2
94716C2
3-1/8" high speed steel blades with 10-18 TPI for fast cuts in metal.
2
Standard Jigsaw Blades
Item #
Description
Quantity
94306C2
3-1/8" high carbon steel blades with 6 TPI for fast cuts in wood.
2
94310C2
3-1/8" high carbon steel blades with 10 TPI for fine cuts in wood.
2
94410C2
3" high carbon steel blades with 10 TPI for multi-purpose semi-smooth cutting in plastic and
composite materials.
2
94512C2
2-3/4" high carbon steel blades with 12 TPI for scroll cuts in wood.
2
94214C2
2-3/4" high speed steel blades with 14 TPI for fast cuts in non-ferrous metal (aluminum, copper, brass, etc.).
2
94218C2
2-3/4" high speed steel blades with 36 TPI for clean cuts in non-ferrous metal (aluminum, copper, brass, etc.).
2
18
Item #
Description
94100
9” Ugly™ HCS Fast Wood-Cutting
Reciprocating Saw Blade
94100-05
9” Ugly™ HCS Fast Wood-Cutting
Reciprocating Saw Blade (5 pk.)
94101
8" bi-metal blade for multi-purpose
applications including wood with
nails, particle board, metals,
fiberglass, and plastics.
94102
6" bi-metal blade for fast cuts in
sheet metal, metal ducts and
conduit, copper pipe, aluminum and
steel siding, tin roof, gutters, metal
framing, and other metals.
®
The Ugly Reciprocating Saw
Blades Sets
Item #
Description
94903
3 pc starter set includes general
purpose blades for cutting in
wood, metal, and wood with nails.
94103
6 pc set includes general purpose
blades for cutting in wood, metal
and wood with nails and bonus
Skil roll pouch for handy
organizing, and transporting.
For additional Skil accessories
visit www.skil.com
Free project plans, tool tips, and more
LIMITED WARRANTY OF SKIL Consumer Portable, Benchtop and HD and SHD Heavy Duty Power Tools
Robert Bosch Tool Corporation ("Seller") warrants to the original purchaser only, that all SKIL consumer portable, benchtop and HD and SHD Heavy Duty power tools will be
free from defects in material or workmanship for a period of one year from date of purchase. SKIL Benchtop and consumer portable power tool models will be free from
defects in material or workmanship for a period of ninety days if the tool is used for professional use.
SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent permitted by law, any warranty or condition implied by
law, shall be the repair or replacement of parts, without charge, which are defective in material or workmanship and which have not been misused, carelessly handled, or
misrepaired by persons other than Seller or Authorized Service Station. To make a claim under this Limited Warranty, you must return the complete product, transportation
prepaid, to any SKIL Factory Service Center or Authorized Service Station. For Authorized SKIL Power Tool Service Stations, please visit www.skil.com or call 877-SKIL-999
(1-877-754-5999).
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY ITEMS SUCH AS CIRCULAR SAW BLADES, DRILL BITS, ROUTER BITS, JIGSAW BLADES, SANDING
BELTS, GRINDING WHEELS AND OTHER RELATED ITEMS.
ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. SOME STATES IN THE U.S., SOME CANADIAN
PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF
PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. SOME STATES IN THE U.S. AND SOME CANADIAN PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S.,
PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY. THIS LIMITED WARRANTY APPLIES ONLY TO PRODUCTS SOLD WITHIN THE UNITED
STATES OF AMERICA, CANADA AND THE COMMONWEALTH OF PUERTO RICO. FOR WARRANTY COVERAGE WITHIN OTHER COUNTRIES, CONTACT YOUR
LOCAL SKIL DEALER OR IMPORTER.
For project ideas and tips: www.skil.com
19
"Introducing the Next Generation of SKILSAWs"
Robert Bosch Tool Corporation
1800 W. Central Road
Mount Prospect, IL 60056
877-SKIL-999
http://www.skil.com
In Canada contact:
Robert Bosch Incorporated
6955 Creditview Road
Mississauga, Ontario
L5N 1R1 Canada
In Mexico contact:
Robert Bosch, S.A. de C.V.
Dr. Lucio 270
Col. Doctores
06720 Mexico, D.F.
Printed in U.S.A.
Comac # SKILCT08
2/08