PDF - RS Machinery

Used Machinery
UM10093 Robocut KZ30 Plasma & Software
Stock Code: UM10093
UM10093 Robocut KZ30 Plasma & Software
Features:
3m x 1.5m Robocut Plasma including software
Hypertherm Powermax 1650 inc machine torch
Full 20' container package inc wiring, fan etc
Used Machinery
UM10009 Colly 2500/75 CNC Hydraulic Downstriking Pressbrake
Stock Code: UM10009
UM10009 Colly 2500/75 CNC Hydraulic Downstriking Pressbrake
Comes with:
Cybelec DNC70
CNC Control
Specification:
Bending length mm
2500
Pressing force T
75
Used Machinery
UM10017 Sagita Beyeler 125/4000 CNC Hydraulic Downstroking
Pressbrake
Stock Code: UM10017
UM10017 Sagita Beyeler 125/4000 CNC Hydraulic Downstroking
Pressbrake
Comes with:
Top and bottom tooling
Hibass infrared lightguards
Cybelec CNC controller
Specification:
Bending length mm
4000
Pressing force T
125
Throat depth mm
320
Distance between frames mm
3700
Voltage V
415
Used Machinery
UM2022 Keetona Hydraform HUF103 Power Folder
Stock Code: UM2022
UM2022 Keetona Hydraform HUF103 Power Folder
Comes with:
Full set of knife tooling
Part set of gooseneck tooling
Specification:
Capacity mm
3175 x 5
Voltage V
415
Used Machinery
UM10020 SMT 10' X 1/2" Hydraulic Swing Beam Guillotine
Stock Code: UM10020
UM10020 SMT 10' X 1/2" Hydraulic Swing Beam Guillotine
Features:
Good Working Order
Rapid Blade Gap Adjustment
Powered Back Gauge
Squaring Arm
Front Support Arms
Resharpened Blades
Swing Beam
Heavy Build
Specification:
Cutting Length mm
3048
Cutting capacity mm
13
Blade size mm
1550 x 19 x 76
Motor kW
22
Voltage V
415
Length mm
3683
Width mm
2260
Height mm
2667
Weight kg
13,000
Used Machinery
UM10083 Morgan Rushworth PS 250/1.25 Powered Swaging Machine
Stock Code: UM10083
UM10083 Morgan Rushworth PS 250/1.25 Powered Swaging Machine
The Morgan Rushworth range of MS, PS and HPS swaging machines are available in manual, powered and hydraulic versions. Swaging
machines are designed to form various shapes to sheet material and are particularly suited for tubular ductwork applications. Easily
interchangeable rolls are included as standard equipment to form the specific shape required.
Features:
Steel welded frame
Adjustable idler roll
Adjustable end stop
Reduction motor with brake
5 sets of standard rolls
Specification:
Thickness mm
1.25
Roll distance mm
62
Roll body distance mm
250
Motor kW
0.7
Length mm
700
Width mm
600
Height mm
1300
Weight kg
170
Used Machinery
UM10061 Imcar SIHR 12/5 3-Roll Hydraulic Double Initial Pinch Plate
Bending Rolls
Stock Code: UM10061
UM10061 Imcar SIHR 12/5 3-Roll Hydraulic Double Initial Pinch Plate
Bending Rolls
Features:
Serial No: B867
Year of Manufacture: 1992
c/w Digital Readouts to both side rolls
c/w Mobile control panel
c/w Extended rolls with stub shaft for section rolling
Specification:
Bending length mm
3100
Rolling Thickness (mild steel) mm
15
Pre-bending thickness (mild steel) mm
12
Top roll diameter mm
280
Voltage V
415
Length mm
4900
Width mm
1620
Height mm
1700
Used Machinery
UM10082 Morgan Rushworth PBR 1250/90 Powered Bending Rolls
Stock Code: UM10082
UM10082 Morgan Rushworth PBR 1250/90 Powered Bending Rolls
Specification:
Bending length mm
1250
Capacity mm
3.0
Roll diameter mm
90
Length mm
4900
Width mm
1620
Height mm
1700
Weight kg
540
Motor kW
1.1
Voltage V
415
Used Machinery
UM2033 Keetona Hydroform Powered Folder
Stock Code: UM2022
UM2033 Keetona Hydroform Powered Folder
Specification:
Capacity mm
2500 x 3.23
Voltage V
415
Used Machinery
UM2508 Pearson 8" x 1.5" Guillotine
Stock Code: UM2508
UM2508 Pearson 8" x 1.5" Guillotine
Specification:
Cutting Length in
8
Cutting capacity in
1.5
Voltage V
415
Used Machinery
UM2535 RVD SBH 2506 Guillotine
Stock Code: UM2535
Used Machinery
UM10028 Pearson 2.5m x 13mm Hydraulic Guillotine
Stock Code: UM10028
UM10028 Pearson 2.5m x 13mm Hydraulic Guillotine
Comes with:
Front arms
Safety guards
Specification:
Cutting Length mm
2500
Cutting capacity mm
13
Voltage V
415
Used Machinery
UM10037 SMT 12H10 Hydraulic Downstriking Pressbrake
Stock Code: UM10037
UM10037 SMT 12H10 Hydraulic Downstriking Pressbrake
Features:
Good Working Lightguards
4 Vee Bottom Tool
Top Tool Re-Ground
Specification:
Bending length mm
3600
Capacity tonnes
200
Stroke mm
230
Voltage V
415
Used Machinery
UM10070 Enerpac Hydraulic H-Frame Pressbrake
Stock Code: UM10070
UM10070 Enerpac Hydraulic H-Frame Pressbrake
The heavily constructed PBH press brake model is of an H frame design and is fitted with heavy duty top and bottom press brake tools, ideal for a
whole variety of heavier bending operations. These models feature adjustable limit switches for ram stroke and return, as well as twin guidance
pistons in addition to the main ram. The machine operates at a safe working speed and is also fitted with a two handed control to ensure the
operator is well away from the working area.
Features:
Very heavy H frame design
Top & bottom press brake tooling
Safe working speed
Quiet hydraulic system
Stepless pressure adjustment
Hydraulic cylinder mounted above tooling providing vertical pressure
Twin guidance pistons in addition to the main ram
Stepless stroke adjustment with limit switches controlling the ram stroke and return
Adjustable bed height with two hardened pins
Control console with two handed operation
Ideal for low or high volume operation
Specification:
Power tonnes
150
Bending length mm
1520
Stroke mm
300
Advance speed mm/sec
9
Working speed mm/sec
5
Return speed mm/sec
10
Motor kW
11
Length mm
2500
Width mm
1000
Height mm
2380
Weight kg
3100
Used Machinery
UM10097 Keetona Hydroform Powered Folder
Stock Code: UM10097
UM10097 Keetona Hydroform Powered Folder
Specification:
Capacity mm
3125 x 5
Voltage V
415
Used Machinery
UM10085 Curvassi C100 Universal Bending Machine
Stock Code: UM10085
UM10085 Curvassi C100 Universal Bending Machine
Curvassi’s unverisal bending machine C100 is ideal for bending thin wall tube to a tight radius and bow top fencing in round bar.
Features:
Bends round, square and flat bar and tube.
Bends mild steel, stainless steel and aluminium.
Ideal for bending thin wall tube to a ‘tight’ radius.
Ideal for bow top fencing in thin wall tube with the aid of a mandrel bar to provide a perfect finish. No wrinkling on inside and no flattening on
outside of tube.
Ideal for bow top fencing in round bar. 12mm bar - 3 bows per bend 16mm bar - 2 bows per bend 20mm bar - 1 bow per bend
Very fast - 180° bend in 3 seconds.
Options:
Tooling for bending round and square tube
Tooling for bow top fencing and round bar
Specification:
Max capacity tube mm
38
Max capacity bar mm
20
Max diameter mm
600
Max bending angle
180º
Mandrel length mm
1620
Motor kW
3.0
Length mm
1950
Width mm
950
Height mm
920
Weight kg
220
Used Machinery
UM10053 Europa Centurion CU5 Vertical Milling Machine
Stock Code: UM10053
UM10053 Europa Centurion CU5 Vertical Milling Machine
Features:
c/w 3 Axis DRO
ISO 50 spindle taper allowing a wide variety of tooling to be used.
Turcite slide-way linings giving improved cutting performance, low slide-way friction and low ware
DC servo feed drive to all axes via fully covered recirculating ball-screws, giving infinitely variable speeds.
Dual hand wheels allow the machine to be operated from either side of the knee
Automatic lubrication system.
Heavy duty knee supports utilising double locking.
Heavy table loads of up to l800 kg can be easily accommodated
Pendant mounted controls for ease of operation.
Complies fully with current EC Machinery
Directives (CE Mark)
Specification:
Table size mm
1635 x 460
No of T-slots
5
Width of T-slots mm
18
Distance between slots mm
80
Longitudinal travel mm
1300
Vertical travel (knee) mm
440
Cross travel (ram) mm
650
Min spindle nose to table surface mm
40
Spindle taper INT
50
No of Spindle speeds
27
Spindle speed range rpm
30 - 2050
Longitudinal powerfeedsw (inf. variable) mm/min
10 - 1000
Cross (Ram) powerfeeds (inf. variable) mm/min
10 - 1000
Vertical powerfeeds (inf. variable) mm/min
5 - 500
Longitudinal rapid feed rate mm/min
2800
Cross rapid feed rate mm/min
2800
Vertical rapid feed rate mm/min
1400
Spindle motor kW
7.5
Max table load kg
1800
Length mm
2010
Width mm
2621
Height mm
1950
Used Machinery
UM10004 Kitchen Walker E4 Radial Arm Drill
Stock Code: UM10004
UM10004 Kitchen Walker E4 Radial Arm Drill
The Kitchen Walker range of radial arm drills are supplied according to the latest UK and CE standards for working safety and have fitted DC
Injection Brake units which provide instant braking of the spindle in an emergency. The components are of long lasting supreme quality and are
used for many functions such as drilling, counter boring, spot facing, reaming, tapping and boring.
Features:
The head is able to be moved along the arm to allow for drilling large workpieces
Specification:
Capacity MT
5
Spindle speed rpm
26 - 1000
Arm length ft
8
Voltage V
415
Used Machinery
UM8014 XYZ KRV 3000 CNC Turret Milling Machine
Stock Code: UM8014
UM8014 XYZ KRV 3000 CNC Turret Milling Machine
Comes with:
Prototrak CNC Controller
Pneumatic Drawbar
Acurite 2 Axis Digital Read Out
Specification:
Capacity mm
1370 x 310
Table size mm
1625 x 305
Taper Int
40
Motor Hp
5
Used Machinery
UM10022 Broadbent 1500mm Manual Lathe
Stock Code: UM10022
Used Machinery
UM10100 Meyer ST2066 Precision Gap Bed Centre Lathe
Stock Code: UM10100
UM10100 Meyer ST2066 Precision Gap Bed Centre Lathe
The Meyer Precision Lathe ST range are large capacity machines with 660 mm swing dimension and distance between centres available up to
2000 mm. Power traverse is fitted as standard equipment to all ST model which is particularly operator friendly for the longer length machines. All
Meyer lathes are of the Gap Bed design with precision ground bed and saddle.
Features:
4 Years Old
3 Axis Digital Readout
Quick Change Toolpost
Taper Turning
Powered Traverses
Specification:
Swing over bed mm
660
Swing over cross-slide mm
440
Swing over gap mm
900
Length of gap mm
250
Distance between centres mm
2000
Width of bed mm
400
Longitudinal - no of steps
25
Longitudinal - range mm/rev
0.022 - 0.74
Cross - no of steps
25
Cross - range mm/rev
0.044 - 1.48
Max travel of cross-slide mm
368
Max travel of compound rest mm
230
Metric - no of steps
54
Metric - range mm
0.45 - 120
Imperial - no of steps
54
Imperial - range TPI
7/16 - 80
Diametric - no of steps
42
Diametrice - range DP
7/8 - 160
Module - no of steps
42
Module - range MP
0.25 - 60
Lead screw pitch mm
2 or 12
Spindle nose
D1-8
Spindle bore mm
105
Spindle bore taper MT
5
Spindle speeds - no of steps
16
Spindle speeds - range rpm
26 - 1700
Quill diameter mm
90
Quill travel mm
235
Quill taper MT
5
Motor kW
7.5
Length mm
3710
Width mm
4720
Height mm
1230
Weight kg
1600
Used Machinery
UM3061 Thomas SAR 300 Bandsaw
Stock Code: UM3061
UM3061 Thomas SAR 300 Bandsaw
The Thomas range of sawing machines have been manufactured in Italy since 1957.
High quality components and attention to design has resulted in a truly heavy duty machine, well able to withstand years of intense use in today's
busy workshops.
Thomas bandsaws are fast cutting, quiet running and ideal for sawing mild steel and stainless steel.
Features:
Fast cutting
Cast bow construction
Carbide blade guides for high accuracy
2 speed motor
Heavy duty
Safety interlock switch fitted to bandwheel cover
Specification:
Capacity mm
300
Operation
Pull Down/Auto Down Feed
Used Machinery
UM10066 Sterling BMSY 320 GL Horizontal Bandsaw
Stock Code: UM10066
UM10066 Sterling BMSY 320 GL Horizontal Bandsaw
The Sterling BMSY 320 GL Horizontal Bandsaw ranges from 280mm to 610mm capacity. The traditional low bed height machine is ideal for
engineering workshops and features hydraulic cutting, hydraulic counter balancing, hydraulic clamping and hydraulic bow lock.
Specification:
Capacity
30°
45°
60°
75°
- Round mm
260
320
320
320
- Square mm
225
320
320
320
280 x 200
355 x 320
510 x 320
580 x 320
- Rectangular mm
Cutting Speed m/min
Blade size mm
20 - 100
4160 x 34 x 1.1
Working height mm
740
Motor kW
2.2
Length mm
2100
Width mm
1200
Height mm
1350
Weight kg
1195
Used Machinery
UM3057 Rusch 340 Automatic Vice Feed Bandsaw
Stock Code: UM3057
UM3057 Rusch 340 Automatic Vice Feed Bandsaw
Comes with:
twin hydraulic shuttle vice
Specification:
Max capacity mm
340
Cutting speed m/min
20 - 95 variable
Motor kW
4
Voltage V
415
Used Machinery
UM10003 Bomar STG 260 GM Horizontal Bandsaw
Stock Code: UM10003
UM10003 Bomar STG 260 GM Horizontal Bandsaw
Capacity mm
260
Throat mm
3000
Cutting speed m/min
22 - 102
Voltage V
415
Used Machinery
UM10057 Sterling BMSY 320 G Roller Feed Horizontal Bandsaw
Stock Code: UM10057
UM10057 Sterling BMSY 320 G Roller Feed Horizontal Bandsaw
Specification:
Capacity
- Round mm
280 - 320
- Square mm
260 - 320
- Rectangular mm
440 x 220
Cutting Speed m/min
20 - 100
Blade size mm
3660 x 27 x 0.9
Length mm
1900
Width mm
850
Height mm
1300
Weight kg
650
Voltage V
415
Used Machinery
UM10021 Fendo 500 SA Super Semi-Automatic Horizontal Bandsaw
Stock Code: UM10021
UM10021 Fendo 500 SA Super Semi-Automatic Horizontal Bandsaw
Specification:
Cutting capacity @ 90º mm
500
Cutting capacity @ 90º mm
400 x 400
Cutting capacity @ 90º mm
600 x 300
Blade speed m/min
20 - 100
Motor kW
22
Voltage V
415
Weight kg
600
Used Machinery
UM4006 Comet 2000 - SV275 Coldsaw
Stock Code: UM4006
UM4006 Comet 2000 - SV275 Coldsaw
Specification:
Blade Diameter mm
275
Voltage V
415
Used Machinery
UM1001 Addison VBS1000 Vertical Bandsaw
Stock Code: UM10001
UM1001 Addison VBS1000 Vertical Bandsaw
.
Capacity mm
1000
Voltage V
415
Used Machinery
UM10086 Bianco 370 A Vice Feed Automatic Bandsaw
Stock Code: UM10086
UM10086 Bianco 370 A Vice Feed Automatic Bandsaw
The Bianco metal cutting bandsaws are manufactured in Italy with reliability and accuracy as the first consideration. All machines have modern
cast bows in special alloys to ensure one of the highest precision bandsaw ranges available. Quality electrical components are fitted to all models
and quiet hydraulic pumps and fittings ensure a long working life.
The 370 A provides fully automatic functionality with hydraulic shuttle vice system, powered bow lift, fast approach and hydraulic variable
downfeed pressure.
Features:
Shuttle Vice Automatic Operation
Fast Approach with auto bow height setting
Mitring Head up to 60°
Cast Bow Construction
Hydraulic Cutting with variable pressure
Coolant
Specification:
Capacity
90°
45°
60°
- Round mm
280
225
140
- Square mm
240
215
140
330 x140
230 x 140
140 x 130
- Rectangular mm
Blade Size mm
Cutting Speed m/min
Motor Kw
3120 x 27 x 0.9
35/70
0.9 - 1.4
Length mm
2800
Width mm
1950
Height mm
1850
Weight Kg
945
Operation
Automatic
Vice
Powered
Used Machinery
UM10072 Thomas Circular Saw
Stock Code: UM10072
UM10072 Thomas Circular Saw
The Thomas range of sawing machines have been manufactured in Italy since 1957.
High quality components and attention to design has resulted in a truly heavy duty machine, well able to withstand years of intense use in today's
busy workshops.
Used Machinery
UM10087 Bianco 330 AE Automatic Vice Feed Horizontal Mitring
Bandsaw
Stock Code: UM10087
UM10087 Bianco 330 AE Automatic Vice Feed Horizontal Mitring
Bandsaw
The Bianco metal cutting bandsaws are manufactured in Italy with reliability and accuracy as the first consideration. All machines have modern
cast bows in special alloys to ensure one of the highest precision bandsaw ranges available. Quality electrical components are fitted to all models
and quiet hydraulic pumps and fittings ensure a long working life.
Features:
Blade feeler arm for fast approach
Two speeds
Shuttle vice
Specification:
Capacity
- Round mm
260
- Section mm
330
Operation
Automatic
Vice
Powered
Used Machinery
UM10071 Meddings Geared Head Bench Pillar Drill
Stock Code: UM10071
UM10071 Meddings Geared Head Bench Pillar Drill
The Meddings geared head bench model is a robust driling machine giving you the benefit of extra torque at the drill point.
Features:
Drill Head
The drill head will rotate 360° around the column and can be raised and lowered.
Gear Box
The gear box is built according to Meddings experienced methods for the highest possible torque. Helical gears combined with steel gears
against reinforced fibre gears in the main gear box ensure higher operating efficiency, a more powerful drive and smooth operation. The noise
level and maintenance of the gear box is reduced to a minimum.
Table
The table is made from high quality cast iron, complete with T-slots and coolant channel.
Spindle
The spindle is mounted in ball and roller bearings and the lower spindle roller bearing is placed as near to the lower part of the spindle as
possible, ensuring greater precision and stability. It is adjusted by the journals in the bearing, which guarantees fine tolerances. The spindle is
counterbalanced by a tension spring and the spindle return can be adjusted depending on the weight of the tool. There is also a built-in tool
ejector for rapid tool exchange.
Column
The column is made from steel, ensuring machine rigidity and precision with the minimum of deviation from the stipulated tolerance between the
drill and the table.
Safety
The machine is supplied with a thermal switch, no-volt release and emergency stop.
Specification:
Capacity mm
25
Column Dia mm
76
Spindle Taper MT no
3
Motor kW
0.9
Speeds rpm
105 - 2900
Spindle Stroke mm
160
Work Table mm
358 x 455
Base mm
340 x 570
Throat depth mm
190
Depth mm
760
Width mm
460
Height mm
1803
Weight kg
130
Used Machinery
UM10084 Bomar STG 230 DGE Horizontal Bandsaw
Stock Code: UM10084
UM10084 Bomar STG 230 DGE Horizontal Bandsaw
Specification:
Capacity
90°
45°
- Round mm
230
130
- Square mm
200
130
300 x 150
200 x 200
- Rectangular mm
Blade Size mm
Cutting Speed m/min
Motor Kw
2710 x 27 x 0.9
28/56
1.1
Length mm
1580
Width mm
900
Height mm
1250
Weight Kg
332
Operation
Semi-Automatic
Vice
Manual
Used Machinery
UM10096 HPC Pulsair 40 CFM Rotary Screw Compressor With
Receiver
Stock Code: UM10096
UM10096 HPC Pulsair 40 CFM Rotary Screw Compressor With
Receiver
This second hand HPC Plusair SM11 has the compressor mounted onto a matching horizontal air receiver.
The HPC series are Rotary Screw Compressors with a belt drive allowing the pressure and output to be varied to suit the required application by
simply changing the pully ratios.
Features:
Two stage air intake filter to ensure the air for 10 compression is clean and dust free to 3 micron
SIGMA profile airend dynamically balanced for quiet running and a pressure range of 3.5 - 15 bar
High efficiency CEMEP EFF1* electric motor with thermal overload protection
SIGMA Fluid injection port for the sealing, cooling and lubrication within the airend
Air/Oil separator with min/max oil level sight glasses, safety valve and pressure gauge
Oil cooler designed for up to 15 bar working pressure
Micro oil filter designed specifically for higher pressure heavy duty operation
Oil separation cartridge. High flow, multi-stage high efficiency separation. Oil carry-over typically 1-3ppm+
Minimum pressure non return valve to maintain internal off load pressure at 1.5 bar
Aftercooler typically provides compressed air discharge temperatures of 60°C above ambient this means that less energy is required to dry
the air downstream
Thermostatic valve ensures rapid warm up and minimises condensate accumulation
Air inlet valve controls the air intake of the compressor
Control and Separator Vent Valve linked to operating pressure to ensure and maintain off-load running
Belt Drive High efficiency positive drive allowing pressure flexibility of 0.5bar increments
Automatic belt tensioning device maintains optimum transmission adjustment
Specification:
Capacity L
150
Working Pressure Bar
7.5
Temperature Range °C
10 - 120
Compressor Type
Rotary Screw
Sound Level dB
69
Motor Kw
7.5
Length mm
1150
Width mm
600
Height mm
1400
Weight Kg
250
© RS Machine Tools | www.rsmachinetools.co.uk | 0800 980 7709 | [email protected]