Arctic Sun Quick Reference ID5.indd

n
Current Patient
Duration
Start
Target
Adjust
Duration Duration
Adjust
Adjust
Continue
Hypothermia
Patient Transport / End Therapy
Hrs: Min
Hypothermia
Normothermia
Manual
Stop
Pads
Start
Continue
Fill Patient
Current
Stop
Shiver
Sensor
Target
Adjust
Hrs: Min
StartStart
Rewarm Patient
Target
Duration
Adjust
Target
˚ ˚
Therapy
Duration
Selection
Help
Sensor
Rewarm Patient
Manual
Empty
Pads
Stop
Continue
Current Patient
Help
Start
Normothermia
Duration
Adjust
Hrs: Min
Rewarm Patient
Continue
Current Patient
Therapy
Selection
If device
was turned off:
˚C/ ˚F
Normothermia
Target
Duration
Manual
Help
Start
Manual
Stop
(Hypothermia or
Normothermia) Empty
Shiver
Sensor
˚ ˚
Verify
protocol settings
Manual
C/ F
Pads
(adjust if necessary)
Shiver
Sensor
Start
Empty
Pads
Fill
Reservoir
PATIENT INFOTherapy
(yellow) Selection
SYSTEM INFO
(blue)
Manual
Shiver
Sensor
Empty
Pads
A
Fill
Reservoir
Press Start
Adjust
Therapy
Selection
Help
Fill
Reservoir
B
Help
Therapy
Selection
Help
Adjust
Rewarm Patient
Fill
Reservoir
• Press the green
start button
Duration
Adjust
Hrs: Min
Empty
Pads
˚C/ ˚F
Shiver
Sensor
Fill
Reservoir
C
Manual
Therapy
Selection
Empty
Pads
Fill
Reservoir
Start
Help
Therapy
Selection
Help
Manual
Select Treatment Option
Hrs: Min
Start
˚ ˚
Adjust
Adjust
Start
Start
˚C/ ˚F
Stop
Hrs: Min
˚C/ ˚F
Rewarm Patient
Target
Start
C/ F
Hrs: Min
Target
Start
Start
Hypothermia
Duration
Adjust
Shiver
Sensor
Stop
Duration
• Power back up
Shiver
Empty
• Press Continue
Current
Patient
Sensor
Pads
• VerifyStart
protocol settings (adjust if necessary)
Cool Patient
Start
Hrs: Min
Fill
Hrs: Min
Cool Patient
Target
Duration
Hypothermia
Duration
Adjust
• Press
the green Reservoir
start
button
Rewarm Patient
Hrs: Min
Cool Patient
Target
Target
Stop
Start
Targetprotocol settings (adjust if necessary)
• Verify
Fill
Reservoir
Therapy
Selection
Empty
Pads
Adjust
Target
Hypothermia
Adjust
Hrs: Min
Start
Hrs: Min
Duration
Adjust
Hrs: Min
If device
was
left on:
Shiver
Hypothermia
˚C/ ˚F
Manual
C/ F
Hrs: Min
Shiver
Sensor
Normothermia
Empty
Pads
Hrs: Min
Fill
Reservoir
Cool Patient
Duration
Duration
Start
Target
Press
the stop button
Duration
Adjust
Empty
pads
Disconnect pads (pinch, push pull)
Cool Patient
Reconnect
PadsStart
(blue to blue/white to white)
Reservoir
Normothermia
Start
Manual
Current Patient
Target
Therapy
Selection
www.bardmedical.com
Help
HELPLINE: 866-840-9776
The 24/7 Helpline is intended to assist healthcare professionals with technical questions they may have regarding
the use of the ARCTIC SUN® Temperature Management System. While the Helpline is staffed by licensed critical care
nurses, they are not able to provide medical or nursing advice or to prescribe treatment.
(A) patient temperature, (B) water temperature,
(C) target temperature
QUICK REFERENCE
Hypothermia
Empty
•
•
•
•
˚C/ ˚F
Rewarm Patient
Cool Patient
Initiate
Treatment:
Hrs: Min
Pad Placement
1) Choose appropriate pad size
2) Roll the patient on his/her side
3) Align the first back pad parallel to the spine
and wrap around front of abdomen
- Ensure curve of pad is 2” below the underarm
4) Wrap the appropriate leg pad (L/R) around the
thigh—femoral access should be exposed
5) Pad lines should be anterior and point toward
the foot end of the bed
6) Turn the patient and repeat
Once therapy is complete, pads should be removed slowly–peel don’t pull
Pad Facts
During Use
• Record water and patient temperature hourly
• Always Empty Pads before disconnection
Bard, Arctic Sun, Arctic Circle and ArcticGel are trademarks and/or
registered trademarks of C. R. Bard, Inc. ©2012 C. R. Bard, Inc.
All Rights Reserved. 1201-85 R02/12 THP P03/12 5M
• Can safely be left on patient for 5 days
• Radiolucent and safe for MRI, CT Scan,
X-ray, Cath Lab
This Quick Reference Guide does not replace product inservicing or the Instructions for Use. See Instructions for Use for
complete indications, warnings, cautions and directions for use.
Please consult product labels and inserts for any
hazards, contraindications, warnings, cautions and
direction for use.