foremost technology for absolute acoustic reproduction guitar - B-Band

Transcription

foremost technology for absolute acoustic reproduction guitar - B-Band
FOREMOST TECHNOLOGY FOR ABSOLUTE ACOUSTIC REPRODUCTION
GUITAR - DRUMS - DOUBLE BASS
NEW PICKUPS • NEW GUITAR PREAMPS
• NEW CIRCUITS • NEW ALLIANCE
-2007-
Contents
GUITAR GEAR
Pickups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Preamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
HZZLESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
XOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
EQ Preamps for One Pickup . . . . . . . . . . 7 - 9
EQ Preamps for Two pickups . . . . . . . . . . . . 10
Onboard EQ Preamp for One Pickup . . . . . 12
Onboard Preamp for Two Pickups . . . . . . . 13
Onboard Preamps for One Pickup . . . . . . . 14
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 15
DRUM AND PERCUSSION GEAR
Drum Contact Mics . . . . . . . . . . . . . . . . . . . 16
Preamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Drum Preamps . . . . . . . . . . . . . . . . . . . . . . . 16
DOUBLE BASS GEAR
Double Bass Pickup and Preamp . . . . . . . . 18
COMPANY . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
View
2006 was a good year. B-Band has performed numerous product focus and changes, and a business alliance, to consolidate
the strengths of B-Band. This evolution of BBand will bring many important, positive, results to all B-Band customers in 2007.
2
For 2007 B-Band introduces a new UST pickup, two new guitar preamps and a new drum
preamp. There are also new upgrades to the
more popular guitar preamps offering higher
output and headroom and very low noise.
B-Band Ltd has also formed a strategic alliance with Belcat Co., Ltd. Belcat is a very
reputable manufacture of amplifiers, tuners,
effect pedals, preamps and pickups since
1988. With this alliance B-Band will bring
products with added value to the customer.
ARTISTS
Terry Bozzio
Larry Carlton
Scott Henderson
Carl Verheyen
Gipsy Kings
Tim Pierce
Steve Trovato
George Pajon Jr. (Black Eyed Peas)
Ben Verdery
Keb Mo
Tierra Negra
Lucinda Williams
MANUFACTURERS
ESP
Gig Pig
Karl Höfner
Ibanez
James Trussart
Meinl
Ribbecke
Santa Cruz
Simon and Patrick
Stagg
Tacoma
Tanglewood
Washburn
Yamaha
2007 Acoustic Guitar magazine
Reader’s Choice Awards Bronze Medal Winner
2006 Guitar World Magazine Double Platinum
Award.
www.b-band.com
Visit the B-Band website! There you will
find all the latest news.
3
Guitar Pickups
NEW FOR 2007- R SERIES RIBBED UST
UST
The B-Band UST* (Under Saddle Transducer) is the finest pickup choice for acoustic
guitar. Instruments equipped with a BBand UST have enhanced countless live
and studio productions by being able to
produce an unparalleled acoustic tone.
The new B-Band R series Ribbed UST
continues with unsurpassed sound quality
but with a more robust structure. The pickup is physically ultra thin and flexible making it easy to install usually without the
need for modifications to the saddle or saddle slot. The new ribbed structure of the
UST R series UST is more durable with better balance properties. This makes installation fast.
The UST is constructed of Emfit® electret film material that is exclusive only to BBand.
Because the B-Band UST is so thin and
very lightweight it does not interfere with
the signal passing through to the body of
the instrument retaining the instrument’s
original acoustic sound. The construction of
the UST is a long consistent structure that
ends with a connector for easy plug-in fitting to the preamp without soldering.
4 | GUITAR GEAR
AST (1470)
The B-Band AST is made of the same exclusive Emfit material found in the UST but
designed to fit at the bridge plate or soundboard of the instrument. The AST has a very
wide frequency response and dynamic
range to capture all the tone details of an
acoustic instrument. It has all the advantages of a microphone without positioning
and feedback.
The AST is very thin, lightweight and
compact. Because of it size and the twoside tape on it’s back, it is easy to navigate
to fit anywhere inside an instrument without critical positioning. The construction of
the AST is a long consistent structure that
ends with a connector for easy plug-in fitting to the preamp without soldering.
Compatible with all B-Band preamps,
the AST can be used as a stand-alone
source or in combination with a UST with a
B-Band dual source preamp. AST can be
used with any acoustic instrument with
good access to the surface that it will be
mounted.
UST
UST and AST Features:
• Operation based on the exclusive B-Band / Emfit
electret film.
• UST has two sizes that will fit most guitars.
• AST (1470) will fit any instrument with clear access
to the surface it is to be mounted on.
• Reproduces the original tone without affecting the
instrument acoustically.
• Ultra-thin and lightweight.
• Wide dynamic range and frequency response.
• High gain before feedback.
• Easy and fast plug-in installation without soldering.
• No or minimal modification.
AST
Order codes / specifications:
UST
22R – 2.2mm / 3/32”: for narrow saddle slot.
Active area 80mm / 3”.
Overall length: 330mm / 13”.
29R- 2.9mm / 1/8”: for wide saddle slot.
Active area: 80mm / 3”.
Overall length: 330mm / 13”.
AST
1470- for all instruments.
Active area: 14mm X 70mm / 9/16” X 2 13/16”
Lead wire length: 240mm / 9 1⁄2”
5
Guitar Preamps
HZZLess
The all new HzzLess™ preamp circuit is a
special design that not only reduces signal
noise but, because it integrates with B-Band
pickups more closely, it also increases the
signal output. All B-Band pickups are made
with the relatively new invention Emfit film.
The pickups have special properties and
now the B-Band developers have to come
up with a way to harness those special
specifications into a higher and cleaner output that can be better used by everyday professional sound electronics.
The results are an respectable 6dB higher signal output with a 9dB reduction in signal noise. The user will find how easy the
new louder volume will fit with their equipment and will be knocked out by the huge
tone that is produced. Clean and loud!
The HzzLess preamp circuit is now presented in the A1.2, A2.2, A3T and A5T
preamps. Soon to be applied to all B-Band
preamps.
XOM Circuit
The XOM (Cross Over Mix) system combines the best aspects of each pickup into
one complete source. By sensing the guitar
from two separate locations and combining
what each pickup does best, the XOM system has a very rich and complex sound that
further augments the already superior
sounding Emfit film pickups.
The ideal process for authentic acoustic
sound comes from combining the high frequencies of the AST and the low frequencies of the UST, making a sound that is
much more complex, true and pure. In addition, the XOM pan pot allows the player to
select between UST / AST mix and the UST
alone or one of the many possibilities inbetween for unlimited possibilities.
The player will find the XOM to be an
amazingly flexible sound manager resulting
in an elegant transparent tone at any performance level.
Find the XOM in these great B-Band products:
• A2.2 onboard preamps.
• A8 and A10 sidemount preamps.
6 | GUITAR GEAR
EQ Preamps for One Pickup
NEW FOR 2007- TUNER SERIES PREAMPS
A3T and A5T
B-Band’s quality sound combined with a
fast, responsive chromatic tuner.
The A3T is new for 2007 but it still retains
the simple and small features that are big on
sound and intuitiveness. The compact
preamp has a 4-band rotary EQ, low battery
LED and a wide range chromatic tuner. The
EQ provide quick and accurate changes. The
chromatic tuner is fast and has a range that
will be welcomed buy customers that want
to tune a full step down from standard- great
for 12-string guitars too! The tuner will show
all notes, including sharps, great for standard and open tunings. The tuner has a single
window showing the pitch and four LEDs
showing the half step, sharp, flat and intune. 9-volt battery powered.
A3T
The A5T has more features including a slider
3-band EQ and volume control, notch filter
and frequency rotary controls, phase button,
low battery LED, and full range chromatic
tuner. The fully chromatic tuner has an LED
strip that shows the note and individual
LED’s showing the half step, sharp, flat, and
in-tune. The tuner is fast and responsive and
will tune to a full step down from standard
and is great for open tunings. 9-volt battery
powered.
A3T and A5T Features:
• Fully chromatic tuner with wide range and fast response
• Single input (UST or AST)
• 4-band EQ (A3T)
• 3-band EQ (A5T)
• Notch Depth and Frequency controls (A5T)
• Phase switch (A5T)
• Battery status LED
• Box-Tight battery holder
• Pre-wired high quality endpin output jack
Order Codes:
A3T
A5T
A3T and A5T Options:
SMB Side mount battery box
B-Box 9-volt phantom power
A5T
For technical specifications see www.b-band.com
7
EQ Preamps for One Pickup
A7 and A9
The A9 is for the guitarist who takes a
straightforward approach to their sound and
wants more quality EQ possibilities and
feedback control at their fingertips. Easy to
use and view slider controls are used for the
extra smooth 4-band EQ that include bass,
middle, treble and presence bands. The volume slider is set at a right angle from the
EQ sliders to provide quick changes when
not viewing.
Set aside from the from the master control section, for easier application, is the
Notch Depth and Notch Frequency rotary
controls and a phase switch for feedback
suppression, plus a low battery LED. The
single input A9 can take advantage of either
the UST or AST transducers and is 9-volt
battery powered. The battery compartment
is conveniently mounted next to the controls
for easy access and battery changes.
The A7 has volume and 4-band EQ controls. The volume and tone controls are all
of the slider type. The single input A7 can
use either the UST or AST pickups and is 9volt battery powered. The battery compartment is conveniently mounted next to the
controls for easy access and battery changes.
The A7 and A9 dimensions allow for easy
replacement of either the smaller or larger
versions of common old-style preamps. The
kits come complete with all hardware needed for installing and includes a pre-wired
high quality endpin.
8 | GUITAR GEAR
A7 and A9 Features:
• Single input (UST or AST)
• Convenient battery compartment
• 4-band EQ
• Notch Depth and Frequency controls (A9)
• Phase switch (A9)
• Battery status LED
• Pre-wired high quality endpin output jack
• Dimensions to fit old style preamps
Order code:
A7
A9
A7 and A9 Options:
B-Box 9-volt phantom power
For technical specifications see www.b-band.com
A7
A9
9
EQ Preamps for Two Pickups
A8 and A10 with XOM*
The A8 and A10 preamps have two inputs for UST and AST, with XOM, with input trims for both, for accurate balance
adjustments, slider volume and 3-band
EQ controls. The A10 also features a
notch filter and frequency control and
phase button. Both active preamps are 9volt powered either by an onboard battery
or by the B-Box phantom power source.
The A8 and A10 dimensions allow for
easy replacement of either the smaller or
larger versions of common old-style
preamps. The battery compartment is
conveniently mounted next to the controls
for easy access and battery changes.
All mounting hardware is included with
the A8 and A10 kits.
* Read more about XOM on page 6.
A8 and A10 Features:
• XOM circuit and mix control
• Dual input (UST / AST only)
• Dual input gain trims
• 3-band EQ
• Notch Depth and Frequency controls (A10)
• Phase switch (A10)
• Battery status LED
• Pre-wired high quality endpin output jack
10 | GUITAR GEAR
Order Code:
A8
A10
Options: B-Box 9-volt phantom power
For technical specifications see
www.b-band.com
A8
A10
11
Onboard EQ Preamp for One Pickup
A11
The A11 is a single input, for UST or AST
pickup, 9-volt powered preamp and features active remote controls for volume,
treble and bass at standard rotary pots.
The preamp is easily mounted anywhere
inside the guitar. The system comes complete with the three pots on a long ribbon
wire, so the pots can be installed at the
soundboard, side, or shoulder of the guitar.
The system is useful for example for upgrading from other manufacturers threepot configurations. The A11 also works
well on solid body guitars that have acoustic bridge.
A11
A11
The A11 kit includes all mounting hardware, output jack and cable, battery holder
and wire harness.
A11 Features:
• 2-band EQ
• Remote rotary pot controls
• Versatile installation
• Box-Tight battery holder
Order code:
A11
12 | GUITAR GEAR
A11 Options:
• SMB Sidemount battery box
• B-Band B-Box 9-volt phantom battery box
For detailed technical specifications see
www.b-band.com
Onboard Preamp for Two Pickups
NEW! NOW WITH HIGHER OUTPUT AND LOWER NOISE.
A2.2 with XOM*
The A2.2 with it’s dual input / single output
onboard preamp, for use with the
UST and AST combination excels in performance over any other preamp of this
type. The A2.2 includes the XOM technique
with mix control to bring the best of the
UST and AST characters together resulting
in a sound that is true to the guitars unique
voice in any performance venue.
The A2.2 is also great for resonator guitars with spider or biscuit bridges. Using
the A2.2 system in a resonator guitar is
simple. The UST pickup goes under the
saddle and the AST is simply attached to
the resonator cone. In this way both pickups pickup the sound like no other systemAt the Source! No other manufactured system does this. The control pad of the A2.2
simply mounts at the sound hole of the guitar. An optional 9-volt battery phantom
power supply is available.
The A2.2 has a small remote control pad
with a volume and mix control that mounts
without modification at the inside edge of
a guitar's soundhole. The preamp is housed
in a lightweight all-metal box and can be
mounted inside the guitar at the side or
back and is powered with a 9-volt battery.
At the preamp there are two input gain
trim controls for both the UST and AST to
match input levels. The entire system installs easily with very minor modificationsone small drill hole each for the pickup and
endpin jack. For fast connections all components plug in without soldering.
All mounting hardware, including a high
quality endpin jack and box-tight battery
holder, are supplied.
* Read more about XOM on page 6.
A2.2
A2.2 Features:
• Dual channel input (UST and AST)
• XOM circuit
• Remote soundhole volume and mix controls
• Each channel has input gain trim
• All plug in connections
• Box-Tight battery holder
• 400-hour average battery life
• High quality output jack
A2.2 Options:
B-Band B-Box 9-volt phantom battery box
SMB Sidemount battery box
For detailed technical specifications see
www.b-band.com
13
Onboard Preamps for One Pickup
NEW! NOW WITH HIGHER OUTPUT AND LOWER NOISE.
A1.2 / A1.2N-1470 with volume control
The A1.2 is the little brother of the “now
classic” B-Band Core / A2 preamps and is
big on classic B-Band sound. The single input A1.2 has a direct frequency response
with 24 dB of gain making a perfect fit with
the B-Band UST (not included). The 1470
AST can alternatively be fitted with the A1.2
if the user is looking for a more flat response than that if the A1.2N. Either way,
the sound reproduction is amazingly pure
and clear.
The B-Band A1.2N-1470 bundle includes
a special version of the A1.2 that has a
slight frequency notch of 6 decibels in the
low-midrange giving the system a smooth
acoustic sound at louder volume levels and
is packaged along with, and for use only,
with the 1470 AST. This gives the user great
tone at a great value. The A1.2N-1470 can
be used in any acoustic guitar, or similar
instruments, that has good access to their
interior.
Both the A1.2 and A1.2N come with a
volume control that simply mounts at the
inside edge of the sound hole with adhesive. The 9-volt battery powered electronics
are mounted in a small tube that is directly
coupled with a high quality endpin jack
making an all-in-one structure. As an option, the A1.2 or A1.2N can be phantom
powered with the B-Band external battery
box.
The structure is light in mass adding very
little weight to the instrument. Both kits include all mounting hardware, box-tight battery holder and wire harness.
14 | GUITAR GEAR
A1.2N-1470
A1.2 / A1.2N-1470 Features:
• Volume control mounted at the soundhole
• A1.2 can use either UST or AST (sold separately)
• A1.2N special design preamp (only for use with
1470 AST)
• A1.2N-1470 bundle includes A1.2N preamp and
1470 AST transducer
• High quality endpin output jack
• Box-Tight battery holder
• 750 hours average battery life
• 9-volt phantom power option
A1.2 / A1.2N-1470 Options:
• B-Band B-Box 9-volt phantom battery box
• SMB Sidemount battery box
For detailed technical specifications see
www.b-band.com
Accessories
B-BAND B-BOX 9-VOLT PHANTOM
POWER BATTERY BOX
The B-Band phantom power is a small external box that uses a standard 9-volt battery
to power any of the current 2007 B-Band
preamps. With the use of a standard 1/4”
TRS to TRS (stereo to stereo) plug type cable, the battery box can send power to the
onboard preamp. If you do not want to have
a battery in your guitar, the preamp can be
phantom powered be the B-Box. The battery
box has a standard 1/4” output jack for cable
connection to a mixer or amplifier.
Order code:
B-BOX
B-Box
B-BAND SADDLE
The B-Band designed Tusq™ saddle by
Graph Tech Inc. is a version of the common
compensated "B" string saddle that improves the overall pickup balance for guitars
with a 2.9mm / 1/8" saddle slot. The design
makes all the string angles behind the saddle the same; making the downward pressure on the pickup even, while keeping the
"B" string intonation correct. This dramatically improves on the string-to-string balance for faster installation and set-up.
Order code:
BBS
BBS
15
Drum Contact Mics and Preamps
The B-Band DM* series is the best miking
solution for drummers and will change the
way of miking a drum kit. The DM series
includes the DST* (Drum Shell Transducer)
transducer and DM preamps. Easily attached to any drum, without any modification, the DM system delivers an immediate
full-response tone without feedback or the
positioning issues associated with standard
microphones.
The DM system only picks up the sound
of the drum it’s attached to! There is no
bleed of sound from other drums or instruments on stage or in the studio, making for
incredible isolation of the drum that is using
the DM system.
Keeping with the B-Band philosophy, the
DM system is very lightweight and does not
add any noticeable weight to the drum. The
DM is unobtrusive and virtually invisible and
will not get in the way of any performing
style. Yet, even with these values, the transducer is very durable and robust, and will
endure rigorous touring. The DST will work
with any trap style drum.
The DM preamp range consists of three
different models: DM-S* with XOM for
snare, DM-T* for toms and DM-K* for bass
drum. All DM preamps fit easily to the drum
rim and are held in place by an adjustable
finger screw. The preamps have a standard
XLR output jack and are 48-volt phantom
powered.
The DM-S has two inputs, one input for
the DST and a 1/8” mini jack auxiliary input
16 | DRUM AND PERCUSSION GEAR
for an optional dynamic microphone. When
the aux mic input is enabled, the B-Band
XOM circuit is activated and a 2 kHz high
pass filter is applied to DST and 2 kHz low
pass filter for microphone. XOM provides a
smooth and wider frequency range to the
blended sound. Four mini switches at the
preamp provide settings for the control of
tone and optional 9-volt phantom power
supply to an extra condenser mic. Four mini
switches at the preamp provide settings for
the contour of tone and for use of extra dynamic mic.
The DM-T is a single input preamp and
will work with any size rack or floor tom. The
DM-T has four mini switches for controlling
the tone on the output signal.
The DM-K is a single input preamp and
has four mini switches for controlling the
tone of the output signal.
Read more about XOM on page 6.
(* Patented, patents pending.)
DM-S
DST at snare
DST Features:
• Easily installed with no modification to the drum.
• Flexible and conforms to any shell radius.
• Ultra thin and very light weight.
• Complete isolation of each drum with no bleed
from other drums.
• Quick setups, because the DST is mounted on the
drum there is no setup time.
• Ultra sensitive, all the performance subtleties are
reproduced. All ghost notes and light strikes can
be heard.
• The DST is mounted on the shell away from any
hits of the drumstick.
• No more danger of hitting a mic or a mic becoming
loose and falling or turning.
• Dimensions: 20 mm x 100 mm x 0.3 mm.
DM-T
DST at tom
DM Series Features:
• Complete isolation of each drum with no bleed
from other drums.
• Eliminates the need for audio gate effects.
• Ultra quick setup time because the DM preamps
are mounted to the rim with an adjustable finger
screw.
• Can be permanently installed for quicker setup
time.
• Ready to go! There is no need to position mics or
mic stands, just plug a standard XLR cable into the
preamp and it’s ready.
• The drum set will have a very clean look without
the clutter of mics and stands.
• Mounts to the drum without any modification.
• DM-S has aux input for condenser (9-volt) or
dynamic mic.
DM-K
DST at bass drum
Order codes:
DM-S
DM-T
DM-K
DM-Pack
Order code: 2100
17
Double Bass Pickups and Preamps
D1 DOUBLE BASS SYSTEM
The D1 system's sound is warm, tight, and
dynamic and has plenty of headroom to
play your instrument loud!
The D1 double bass has been developed
in close coordination with technicians and
artists. The D1 system includes a simple
and unobtrusive active preamp that is an
all-in-one construction with the 1/4"output
jack. This attaches easily onto the two middle strings between the bridge and tailpiece. The 9-volt battery clip simply attaches to the tailpiece with Velcro.
The B-Band D1 system also includes
three easy-to-install transducers* and are
placed –two at the wing slots of the bridge,
using non-adhesive cork shims, and the
third under the foot of the bridge’s bass
side, using the string pressure on the
bridge to hold it in place. Inside the preamp
there is a user mix control to set the balance between the bridge and the body
sound for exact replication of your instruments unique tone.
( * Patented, patents pending )
18 | DOUBLE BASS GEAR
D1 Features - Transducers:
• 1 B-Band Statement body transducer
• 2 B-Band Statement bridge transducers
D1 Features – Preamp:
• Attaches easily onto the two middle strings
between the bridge and tailpiece with a metal clip
• User mix control to set the balance between the
bridge and the body sound
• 9-volt battery clip simply attaches to the tailpiece
with Velcro
Order code: D1
D1 Options:
B-Band B-Box 9-volt phantom battery box
For detailed technical specifications see
www.b-band.com
Company
ORIGINAL
B-Band is original. When outdated piezo
crystal technologies have been mutated in
countless ways, and extra hardware expanded to make acoustic instruments to
sound “more real”, B-Band takes a different
approach. B-Band has a unique transducer
material, and manufacturing technology,
that produces a pickup that more efficiently
replicates the natural sound of any musical
instrument.
B-Band pickup systems, in their simplicity, do not color the tone and are so unobtrusive they do not spoil the natural uniqueness of your instrument.
DETERMINED
B-Band has sustained a high profile within
the musical instrument industry for over a
decade. Fundamental to this success are
the endeavors and hard work of many, and
for B-Band to intuitively rise to the commitment of a mission that is continually set by
the customer expectations. We believe that
for our customers to succeed, we need to
go beyond the boundaries of what the customer expects.
B-Band was established in 1991. The
starting point of the company’s new business in 1995 was the introduction of the
proprietary Emfit® film, an electret film invented in Finland. Lasse Räisänen, one of
the founders of Emfit Ltd, and Heikki
Räisänen, founder and director of B-Band
Ltd, nurtured the idea that the Emfit material would make a excellent transducer for
acoustic instruments. That idea was realized and continues to be a source of inspiration for amplified acoustic sound. Emfit is
used in every B-Band transducer.
B-Band cares what the music professional and music lover want. We understand that the customer wants to be recognized as a leader by using or distributing a
great sounding, quality product.
We at B-Band are honestly determined
to help you reach your audience or customers through quality and innovation.
Heikki Räisänen
President
B-Band Ltd
COMAPANY | 19
Media M1 - Kehitys Oy - 1/2007
The outstanding sound reproduction of the BBand transducer is based on the technology of
a novel, worldwide, patented high-tech electret
film exclusive to B-Band and is manufactured in
the spirit of true acoustic instrument aficionados.
The Emfit® material is very different from piezo-electric films and transducers and is entirely
unique in the industry. How is it different? We
could go into a long discussion about the technical aspects, like the “microscopic lens-like gas
bubbles”™ inside the permanently charged film
but the most important difference is the sound.
Whereas piezo pickups tend to impart a sound
of their own (often described as “quacky” or
“plastic”), B-Band transducers act in much the
same way a condenser microphone does. This
results in excellent reproduction of your acoustic
guitar’s unique sound.
www.b-band.com
Visit the B-Band website for more information.
B-Band Ltd
Konttisentie 8 B | FI-40800 VAAJAKOSKI, FINLAND
Tel: +358 14 332 9050 | Fax: +358 14 332 9001 | Email: [email protected]
B-Band, Inc.
10909 Vanowen St., Suite 300 | N. Hollywood, CA 91605 | USA
Tel: (818) 508-9412 | Fax: (818) 508-9413 | Email: [email protected]
B-Band, B-Band logo, “Hear the Truth”, “microscopic lens-like gas bubbles”, AST, UST, DST, XOM, XOM logo, DM, DM-S, DM-T, DM-K, A1.2, A1.2N, A2.2, A3T, A5T, A7, A8, A9, A10, A11, B-Box, D1, A1.2C are either registered
trademarks or trademarks of B-Band Ltd in the U.S.A., EU and / or other countries. Emfit is a registered trademark of Emfit Ltd. ©1996-2007 B-Band Ltd. All rights reserved. All specifications are subject to change without
prior notice.
ESP, Gig Pig, Karl Höfner, Ibanez, James Trussart, Meinl, Ribbecke, Santa Cruz, Simon and Patrick. Stagg, Tacoma, Tanglewood. Washburn, Yamaha, Tusq and Graph Tech are either registered trademarks or trademarks of
their respective companies with whom B-Band Ltd and B-Band, Inc. are not affiliated.