Paslode 50th Anniversary Pneumatic Framing Nailer Spec Sheet

50 th Anniversary
Pneumatic Framing Nailer
Adjustable air deflector
To celebrate 50 years of making advancements
in pneumatic framing, Paslode is introducing
a special anniversary edition framing nailer
based on the top-selling F350S PowerMaster
Plus platform.
Over-molded grip for extra comfort
Refreshed in Paslode’s signature orange hue,
the 50th Anniversary Framing Nailer has a bold
appearance to match its standout performance,
with the trustworthy features and benefits of
the legacy F350S PowerMaster Plus:
Convenient, adjustable rafter hook
Proven and reliable
performance
Center of gravity is close to trigger,
providing optimal balance
• C
onsistently delivers and drives nails
flush to keep users productive and
minimize rework & downtime
Durable, rugged design built to withstand
the toughest jobsite conditions
Durable
MATIC FRAMING
PNEU
Easy to adjust work contacting element
• B
uilt to last and requires
less maintenance
Compact
• Fits between studs, joists, and rafters.
Backed with the protection of a
one-year full coverage warranty
Tool Specifications
Description Paslode 50th Anniversary Pneumatic Framing Nailer
ModelF350-S
Nail Capacity
2 strips (approx. 84 nails)
Part No511990
Cycle Rate
12 nails/second*
Weight
Air Req./100psi082/cycle
8.4 lbs
Height13.3”
Operating psi (bar)80-120
Length19.5”
Warranty
1-year full coverage
*Will cycle 12 times/second if air supply can replenish that rate.
Typically found with automated mass production applications.
Brite Framing Nails
Use with genuine
Paslode 30° Framing Nails:
Fastener Specifications
Fastener Type
Round head and D-Head Strip Nails
Collation Angle
30 Degree
Nail Range
2”–3-1/2”
Shank Diameter .113, .120, .131
Shank Type
Smooth or Ring
Coatings
Brite or Galvanized
• Best drive performance in the hardest lumber
• Tight holding power for most secure fastening
•Rigid and compact strips are durable
and easy to handle
• ICC-ES Recognized
Hot Dipped Galvanized
Framing Nails
•Premium corrosion resistance in all pressure
treated lumber such as ACQ and MCQ
•Polymer coating reduces staining and
streaking by 80% compared to traditional
hot dipped galvanized nails.
•IRC R319.3 code approved for use in pressure
treat lumber in accordance with ASTM A 153.