Ultra2007 File1of4.pmd

Transcription

UL
TRA CA
TAL
OG
ULTRA
CAT
ALOG
02
07
index a–c
1
[<]
3
REV. 1.06
bottle bay
4–way
4–way feature end frame
hardware
metal top panel
perf back panel
shelves
solid back panel
wood base
34
34
34
34
34
34
34
streater inc. 411 south first avenue albert lea, mn 56007 800.527.4197 www.streater.com [email protected]
accessories
base bulkhead
center bottom arm tie down
cover plate
cross bar
end bottom arm tie down
flange bracket
glides
hang rod components
heavy duty wallmount standard
leveler
standard wall tie bracket
super structure locking key
super structure post
super structure u bar
top cap anchor bracket
top cap bracket
touch–up paint
upright & bottom arm tie down
wallmount standard
36
39
36
41
39
41
36
41
37
36
39
37
37
37
39
36
41
39
37
bottle bay
double bottom
double end panel
double top
hardware pack
overlay end panels
shelves
single back brace
single base cover
single bottom
single end panel
single top
solid back panels
45
46
46
46
48
48
48
47
47
47
47
47
46
bottom arms & decks
center bottom arm
deck
end bottom arm
22
22
22
caster components
brace
caster
channel
hardware
38
38
38
38
back panels
perf, 4–way
perf, extender
perf, feature end frame
perf, gondola
slatwall, extender
slatwall, feature end frame
slatwall, gondola
solid, 4–way
solid, bottle bay
solid, extender
solid, feature end frame
solid, gondola
square cut
34
26
33
25
26
33
25
34
46
26
33
25
25
55
base components
base nose
base nose end cap
electrical floating kick plate
floating kick plate
flush base
contour end base
24
24
24
24
24
24
30
cornice
metal front
metal return
metal shelf mount bracket
telescoping bracket
back room
back room system
contour end base
40
40
40
40
4
[ >]
02
07
index c–u
1
REV. 1.06
cross components
cross tie
replacement top cap
slatwall tie bar
tie bar
top cap
23
23
23
23
23
23
security case components
glass door assembly
metal end panels
hardware
35
35
35
shelving options
feature end frame
bottom angle
feature end frame
hardware
perf back panel
side rail
sign stem fitting
slatwall back panel
solid back panel
t–brace
top channel
32
31
32
33
32
32
33
33
31
32
3" wire fencing
basket/shelf brackets
book shelf adapter
endless wire basket
glass shelf
product retainer
reversible wire shelf
shelf key
28
29
28
29
29
28
29
28
heavy duty shelf
standard shelf
27
27
gondola standards
center standard
end standard
extender standard
21
21
21
under counter cabinets
information
base & extender standard assembly
color information
customer directed move–outs
exploded gondola & wallcase
gondola & wallcase component specifications
open back components
terms & conditions of sale
unbalanced load calculations
unbalanced load ratings
20
8
9
18
12-17
19
7
10
11
outrigger & widespan
outrigger
widespan
55
56
3 drawer locked narcotics
3 drawer vial/bottle
4 drawer accessory
5 drawer accessory
5 drawer RX
adjustable shelf
back splash
basic open
counter top
drawer & half door
dual shelf
half modular
high rise end panel
locked drawer
over sink
printer
printer pullout
sink
waste
53
52
50
51
53
54
54
49
54
50
49
52
54
50
53
51
52
51
49
standard & heavy duty shelves
02
07
index w–z
1
REV. 1.06
WireFlex™
akro bin
base deck
island
monitor tray
reinforced cross bar
shelf
speedwall
telephone tray
tray divider
vial cap bin
wall
wallmount standard
44
43
42
44
44
43
43
44
44
44
42
43
[<]
5
02
07
1
terms & conditions of sale
[<]
7
REV. 1.06
Price and Acceptance: Streater reserves the right
to change its prices and other terms and/or conditions
of sale without notice. All orders placed shall be in
writing and become effective only upon acceptance
by Streater at its offices in Albert Lea, MN. Streater
at its discretion may add handling charges depending
on order size and/or order requirements.
Taxes: Buyer agrees to pay all taxes which Streater
may be required to assess. If buyer claims a tax
exempt status, buyer will provide Streater with a
valid tax-exemption certificate.
Payment Terms: Payment to Streater will be cash
with order or net 30 days to qualified buyers, upon
approval by Streater Credit Department. Overdue
payments will be assessed interest charges at the
legal rate of the State of Minnesota or the state of
the buyer's residence, whichever is greater.
Freight and Delivery: Freight is F.O.B. Albert Lea,
MN. Method and route of delivery are at Streater's
discretion unless Streater is furnished with complete
shipping instructions at least 10 days before the
scheduled ship date. Time-sensitive delivery will
be handled at Streater's discretion. Quotations for
time-sensitive delivery are available upon request.
Freight charges will be prepaid and added to the
invoice unless otherwise instructed. Streater will
endeavor to ship on the requested ship date and
every effort will be made to fill orders completely;
however, it may be necessary at times to backorder.
Streater will not be liable for any delay in the
performance of any order or contract, or in the
delivery of any goods, or for any damages resulting
from such delay, when such delay is due to fire,
riots, acts of God, strikes or other events beyond
the control of Streater.
Freight and Damage Claims: Freight is F.O.B.
Albert Lea MN. What this means is that title to the
product is passed on to you when the freight carrier
picks up the shipment from Streater and signs the
bill of lading. Any freight damage and resultant
claims are between you and the freight carrier. It is
your responsibility to file a freight claim.
Loss of Freight: Compare the counts of the bill of
lading to what you actually receive. Any exception
must be noted on the carriers delivery receipt.
Failure to note any exception at this time will result
in the carrier denying your claim.
Damage of Freight: Damage to goods received
must be noted on the carrier's delivery receipt
before the driver leaves the place of delivery. Ask
the driver for claim forms. If the driver does not
have any forms, call the carrier and request claim
forms be mailed to you. Generally, if the damage to
the product exceeds $500.00, the carrier must be
called for an inspection. Salvage must be held for
the carrier (Very important).
Concealed Damage: If goods arrive in apparently
good condition, but there is concealed damage,
contact the carrier and ask for the goods to be
inspected. Keep the product and the packaging
material until they have been inspected. A claim
needs to be filed with the carrier.
Returned Goods: No equipment may be returned
without the advance written approval of an
authorized Streater representative. Only stock
catalog items may be returned within 60 days of
original delivery and items must be in unused
condition. A handling and restocking charge of 20
percent of net price will be assessed on all returns.
Buyer will forward all returns to Streater freight
prepaid and all items must be properly packaged.
Warranty: Streater warrants to original purchaser
that the products it manufactures shall be free from
defects in material and workmanship and will
conform to applicable specifications, drawings,
samples, and descriptions. This warranty shall
extend for a period of one year from date of delivery
to original purchaser for use. Streater, at its option,
may repair or replace any products which, upon
Streater's inspection, prove to be defective. Except
as set forth herein:
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY.
UNDER NO CIRCUMSTANCES SHALL STREATER BE LIABLE
FOR ANY CONSEQUENTIAL DAMAGES INCURRED BY ORIGINAL
PURCHASER AS A RESULT OF STREATER'S PERFORMANCE
UNDER THIS ORDER.
8
[ >]
02
07
color information
1
REV. 1.06
TYPE
Metal
SET UP COST
None
LEAD
TIME
Normal
015–Decor White
0LA–Frosty White
0PP–Platinum Plus
025–Black
0KM–Dove Gray
Wood
None
Normal
015–Decor White
0LA–Frosty White
0PP–Platinum Plus
0KM–Dove Gray
Base
Components
None
Normal
025–Black
013–Dark Bronze
None
Normal
082–Zinc plating (satin)
081–Chrome (bright)
None
Normal
0LA–Frosty White
$500 for wood
$500 for metal
per Purchase
Order
Normal
0GX–Skyline Gray
0J8–Bright White
070–Bright Blue
0MT–Liberty Red
0KA–Charcoal
013–Dark Bronze
Plated
Components
(where indicated)
Bottle Bay
OPTIONAL COLORS
COLORS
(when not used on base components)
025–Black (wood only)
CUSTOM COLORS
As Quoted
As
Quoted
Per customer request
STANDARD COLORS
02
07
customer directed move–outs
1
[<]
9
REV. 1.06
Customer requested changes to ship dates are subject to approval by Streater.
Every reasonable effort will be made to accommodate these requests without
additional charges to the customer. However, customer requested move-outs within
five (5) working days of the scheduled ship date will be subject to the following:
1. Surcharge
A.
Orders scheduled for picking,packing and loading,
but not yet worked on by the warehouse:
LTL orders (less than a full semi-trailer load) will be
assessed 5% of the net selling price of the order as
a handling fee - minimum $50/maximum $250
B.
Trailer-load sized order assessment will be determined by Vice President of Sales or Vice President
of Manufacturing.
C.
Jobs picked and sitting on loading dock, but not yet
loaded:
• LTL orders will be assessed 10% of the net selling price of the
order as a handling fee - minimum $100/maximum $500.
• Trailer-load sized order: load trailer, invoice customer and
charge customer the storage charge for each trailer.
• For orders in process of being loaded, the assessment would be
the same as the bullet above.
• There is a 20% restocking charge if it is necessary to unload a
trailer.
10
[ >]
02
07
unbalanced load calculations
1
REV. 1.06
When heavily loading one side of your wall or gondola shelving, it is important to determine if you are creating an
unbalanced load that exceeds the maximum design load (SEE LOAD CAPACITY CHART ON PAGE 106). The sample
calculation below illustrates how you can determine your unbalanced load in inch-pounds.
NOTE: Inch-pounds are a measure of the shelf loads acting at a distance (½ shelf depth) from the standard (upright).
SAMPLE CALCULATION
STARTER / ADD-ON UNIT TYPE USED FOR ILLUSTRATION
CALCULATE THE UNBALANCED LOAD
ACTING ON THIS STANDARD
Side 1
Side 2
200#
8"
16"
200#
16"
18"
9"
8"
200#
9"
400#
9"
18"
200#
400#
150#
200#
16"
18"
16" 200#
Side 2
150#
8"
400#
9"
Side 1
400#
9"
9"
18"
400#
18" 400#
18"
400#
18" 400#
18"
SECTION A
SECTION B
200#
B
Side 1
A
SECTION
B
SECTION
A
Side
2
Shelf depth ¸ 2 x Shelf load ¸ 2
Side 1
x
x
x
x
x
x
800"#
1800"#
1800"#
8"
9"
9"
8"
9"
9"
no load
8"
9"
9"
100#
200#
200#
75#
100#
100#
Side 2
Total unbalanced load acting on
standard
600"#
900"#
900"#
0
x
x
x
total (Section A & B)
100#
200#
200#
4400"#
Subtract the smaller from the larger
800"#
1800"#
1800"#
6800"#
6800"#
- 4400"#
2400"#
NOTE: Shelf depth is divided by 2 because an evenly
distributed shelf load is calculated as a total load at
center of shelf depth.
Shelf load is divided by 2 because a shelf load is
supported by 2 standards.
Deck load does not contribute to unbalanced load.
200#
02
07
unbalanced load capacity ratings
1
[<]
REV. 1.06
UNIT TYPE
2½" Standard
INCH-POUND
CAPACITY
STARTER
one unit, with 2 end standards (single uprights)
3,400"#
STARTER/ADD-ON
any one unit at either end of run with1 end standard & 1 center standard
(double upright)
9,500"#
STARTER/ADD-ON/FEF
any end unit (1 end standard & 1 center standard) at either end of run with
feature end attached
12,000"#
ADD-ON/ADD-ON
any unit within a run with 2 center standards (double uprights)
12,000"#
SPECIAL NOTES:
• Maximum height to depth ratio is 5:1. Any situation where the height of a standard is more than 5 times the
length of the bottom arm must be approved by Streater engineering department.
• The maximum unbalanced load on shelves above the joint on an extension standard (upright) should not
exceed 2500 inch-pounds.
• The loads applied to perforated back panels should not exceed 150 lbs. per panel.
• Shelf locking keys increase inch-pound capacity by approximately 15%.
• Please check with Streater engineering department for verification if unfamiliar with loading conditions.
11
12
[ >]
02
07
gondola & wallcase specifications
1
REV. 1.06
.56"
1.38"
1.00"
12" - 14" - 16" 18" - 20" - 22" 24" - 28"
50.56"
55.56"
60.56"
65.56"
70.56"
85.56"
95.56"
1.81" 7.18"
full gondola - trimline
2.50"
half gondola & wallcase - trimline
.87"
1.38"
1.84"
4.00"
50.56"
55.56"
60.56"
65.56"
70.56"
85.56"
95.56"
2.12" with optional base nose added
12" - 14" - 16" 18" - 20" - 22" 24" - 28"
7.18"
full gondola - trimguard
2.50"
half gondola & wallcase - trimguard
1.00"
02
07
contour end & feature end specifications
1
REV. 1.06
30.29"-36.29"-48.29"
[<]
13
10.5"
12.5"
14.5"
16.5"
22.5"
50.56"
55.56"
60.56"
65.56"
70.56"
85.56"
95.56"
1.00"
1.38"
1.84"
4.00"
2.12" 7.25"
13" - 15" - 17" - 19"
-25"
2.12"
STANDARD DUTY 28.5" - 32.50" - 36.50" 40.50" - 44.50" - 48.50"
trimguard contour end base with feature end frame
30.29"-36.29"-48.29"
28.5" - 32.50" - 36.50" - 40.50" - 44.50" 48.50"-
50.56"
55.56"
60.56"
65.56"
70.56"
85.56"
95.56"
10.5"
12.5"
14.5"
16.5"
22.5"
1.00"
1.38"
7.25"
13" - 15" - 17" - 19" 25"
2.12" 2.12"
trimline contour end base with feature end frame
14
[ >]
02
07
1
REV. 1.06
cross tie
standards
.49" .56"
.57"
2.50"
2.46"
2.50"
.375"
1.25"
.73"
end
standard
29.75
35.75"
47.75"
center
standard
• actual heights of standards
37½" - 50½" - 60½" - 65½" - 70½" 85½" - 95½" • 12 gauge steel
• baked acrylic enamel
• 30", 36" & 48" module lengths
• kwik-fit™ - no attachment hardware required
• 16 gauge steel
top cap
2.49"
.75"
1.43"
.86"
29.97"
35.97"
47.97"
10.78" - 12.78" - 14.78"
16.78" - 18.78" - 20.78"
22.78" - 26.78"
6.22"
• 16 gauge steel
• available with electrical outlet
• nominal lengths 12" - 14" - 16" - 18" - 20" - 22" - 24" - 28"
• 13 gauge high strength steel
tie bar
center bottom arm
1.70"
.75"
1.16"
29.75"
35.75"
47.75"
1.50
10.78" - 12.78" - 14.78"
16.78" - 18.78" - 20.78"
22.78" -26.78"
6.22"
• 18 gauge steel
• nominal lengths 12" - 14" - 16" - 18" - 20" - 22" - 24" - 28"
• 14 gauge steel with 12 gauge steel hooks
end bottom arm
02
07
1
[<]
15
REV. 1.06
trimguard base nose
12" - 14" - 16"
18" - 20" - 22"
24"-28"
47.97"
35.97"
29.97"
•
•
•
•
•
trimline floating kick plate
30", 36" & 48" module lengths
protects front of base deck from carts, etc.
18 gauge steel
baked acrylic enamel
optional item, order as added item to trim-line gondola kits
.94" 2.09" trimguard base nose end cap
29.97"
35.97"
47.97"
6.31"
1.83"
.58"
1.84"
•30", 36" & 48" module lengths
• one piece 23 gauge embossed steel deck pan
with
rolled-in 1¼" ticket moulding
• welded end plates & reinforcement hat sections
• two row perforations front & rear
.44"
2.13" 29.88
35.88"
47.88"
.60"
•
•
•
•
base deck
2.10"
30", 36" and 48" module lengths
18 gauge steel
available with electrical knockout
nominal 1/4" back panel
- finished one side
•
•
•
•
•
finishes off ends of trimguard base nose
two per half starter module & four per full starter module
18 gauge steel
optional item, sold individually
nominal 3/4" slatwall back panel
- finished one side
Fixture
Height
Actual
Height
51"
56"
61"
66"
71"
86"
96"
43.50"
48.50"
53.50"
58.50"
63.50"
78.43"
88.43"
• Perforated or solid backs in choice of standard or optional color
- baked enamel (see color chart for reference)
35.12"
47.12"
• slatwall backs in choice of standard or optional color
- baked enamel (see color chart for reference)
- with or without steel T-slot inserts
16
[ >]
02
07
1
REV. 1.06
wallcase anchoring devices
2.12"
*regular duty(2-1/2" wallcase)
86" - 96" heights
includes 2 standard wall tie
brackets per module
1.50"
.48"
29.97"
35.97"
47.97"
.105"
7.38"
.65"
.61"
flush base
• 12 gauge steel
• (82) zinc plated
• 30", 36" - 48" module widths
• retains bottom of back panel when no base is required
• 20 gauge steel
contour end base
trim-guard
shown
1.78"
•
•
•
•
- 14" - 16" - 18" - 24" nominal depths
26" thru 46" nominal widths on standard duty
fits 14" thru 22" bases both sides
three row perforations front and
three row perforations rear
• available in trimguard and trimline
.94"
.94"
1.50"
1.02"
• fits gondola heights through 86"
• 30" - 36" - 48" module widths
• choice of 1/4" back panels
• support plate hooks on bottom arms
• 1-1/4" slot spacing frame, 12 gauge steel
.88"
1.02"
end bottom arm
tie down
• 12 gauge steel
Fixture
Height
51"
56"
61"
66"
71"
86"
center bottom arm
tie down
• 12 gauge steel
Actual
Height
43.08"
48.08"
53.08"
58.08"
63.08"
78.08"
30.29"
36.29"
48.29"
3.54"
1.50"
.19"
2.00"
feature end frame
.50"
.19"
top cap anchoring bracket
• 12 gauge steel
14.00"
16.00"
18.00"
24.00"
4.00"
26.50"
30.50"
34.50"
38.50"
42.50"
46.50"
02
07
2
REV. 1.06
caster assembly
35.87"
47.87"
2"
• 36" - 48" module lengths
• steel support 12 gauge steel
• 2" dia. casters
1.00"
superstructure post
top
view
1.50"
• adjustable height with use of key
through slots and resting on top cap
• 13 gauge steel
caster capacity:
half gondola 550 pounds per section
full gondola 800 pounds per section
[< ]
17
18
02
07
exploded gondola & wallcase
[ >]
2
REV. 1.06
basic gondola and wallcase
3
1.
2-1/2" end standard
two per starter module
1
2.
2-1/2" center standard
one per add-on module
3
2
3.
10
4.
1
top cap
one per module
tie bar
one per module 51" thru 96" height
4
*4a. slatwall tie bar
8
8
5.
7
6.
end bottom arm
one pair per half starter module
two pairs per full starter module
11
7.
12
center bottom arm
one per half add-on module
two per full add-on module
8.
3
base deck
one per half module
1
two per full module
9.
trim-line floating kick plate
one per half module
two per full module
3
1
10
2
10. 1/4" back panel
ordered separately
*11. trimguard base nose
(added to floating kick plate)
one per half module
two per full module
4
8
6
*12. trimguard base nose end cap
two per half starter module
four per full starter module
*13. flush base
one per half module
7
8
9
5
6
9
*14. extender standards
one per end standard
two per center standard
*These items are optional
11
12
trimguard base
trimline base
6
cross tie
one per module
9
9
5
used when instaling slatwall
one per module 51" thru 71"
two are needed for anything higher
6
02
07
exploded open back
2
[< ]
19
REV. 1.06
open back with cross tie
3
3
1
2
1
4
4
5
5
• To build 1 open back, 2 end standards, 2 cross ties, 2 tie bars
and 2 top caps will be needed
• To add on to an open back, 1 center standard, 1 cross tie,
1 tie bar and 1 top cap will be needed
• If back panels are desired, see page 25
• See color chart for paint color choices
open back with flush base
3
1
3
2
1
4
4
5
13
5
13
• To build 1 open back, 2 end standards, 2 cross ties, 2 tie bars,
2 top caps and 1 flush base will be needed
• To add on to an open back, 1 center standard, 1 cross tie,
1 tie bar, 1 top cap, and 1 flush base will be needed
• If back panels are desired, see page 25
• See color chart for paint color choices
20
[ >]
02
07
base & extender standard assembly
2
REV. 1.06
base components
• 2 end bottom arms ,1 base deck and 1 kickplate make up a single base.
• 1 center bottom arm, 1 base deck and 1 kickplate make up an add–on
base kit
• Levelers, see page 36
• Base bulkhead for heavy deck loads, see page 36
• Trimguard base nose, see page 24
• Designate paint color for deck and paint color for bottom arms and
kickplate (see color chart for paint color choices)
8
6
8
7
9
extender standards
• Each starter should have 2 end extender standards,
1 tie bar, and 1 H–channel (5" extender assembly does not
need a tie bar)
• Each add-on should have 2 end extender standards
1 tie bar, and 1 H–channel
• Order back panel separately (see page 26)
• Designate paint color (see color chart for paint colors available)
14
4
14
14
4
6
9
02
07
gondola standards
2
[< ]
21
REV. 1.06
end standard
size
part number
wt.
price
38
51
56
61
66
71
86
96
08403-0300
08403-0063
08403-0062
08403-0061
08403-0060
08403-0059
08403-0058
08403-0056
5.0
6.6
7.3
8.0
8.7
9.4
11.4
14.6
27.40
22.35
24.35
26.50
28.55
30.60
36.65
41.50
• Used at ends of each run of fixtures
• To add levelers put a L at the beginning of the part
number EX. L8403-0300 and add $3.00 per standard.
• To level standards yourself see page 36
• For glides see page 36
center standard
size
part number
wt.
price
38
51
56
61
66
71
86
96
08712-0130
08712-0036
08712-0035
08712-0034
08712-0033
08712-0032
08712-0031
08712-0029
10.0
13.1
14.5
15.9
17.4
18.9
22.7
29.2
56.10
46.00
48.60
54.35
57.00
62.25
76.10
85.85
• Used in every add-on unit in a run of fixtures
• To add levelers put a L at the beginning of the part
number EX. L8403-0300 and add $3.00 per standard.
• For levelers see page 36
extender standard
size
part number
wt.
price
05
10
15
25
08800-0500
08800-0505
08800-0506
08800-0508
1.0
1.8
3.8
5.0
32.50
35.05
39.10
45.40
5”-15” extender center standard hardware
size
part number
description
qty.
price
-
00060-1079
00060-1156
00060-1166
1/4”-20x3/4” screw
1/4”-20 hexnut
1/4” washer
2
2
2
.10
.10
.10
price
25” extender center standard hardware
size
part number
description
qty.
-
00060-1079
00060-1156
00060-1166
1/4”-20x3/4” screw
1/4”-20 hexnut
1/4” washer
3
3
3
.10
.10
.10
• For adding height to existing gondolas and wallcases
• Back panels sold separately on page 25
• Order 2 extender standards and hardware to assemble a center
extender standard.
22
[ >]
02
07
bottom arms & decks
2
REV. 1.06
end bottom arm
size
part number
wt.
price
12
14
16
18
20
22
24
28
08704-1545
08704-1546
08704-1547
08704-1548
08704-1549
08704-1550
08704-1551
08704-1553
2.2
2.7
3.1
3.5
3.9
4.3
4.7
5.4
9.25
10.40
11.65
12.90
14.15
15.35
16.50
18.75
center bottom arm
size
part number
wt.
price
12
14
16
18
20
22
24
28
08704-1521
08704-1522
08704-1523
08704-1524
08704-1525
08704-1526
08704-1527
08704-1529
3.1
3.5
3.9
4.8
4.9
5.2
5.5
6.2
13.90
15.00
16.15
17.30
18.40
19.55
20.65
22.70
• Used with center standards
• To order bottom arms leveled add L to the beginning of the part
number EX. L8704-1445 and add $2.60 per bottom arm.
• To level bottom arms yourself see page 36
• Must be ordered in quantities of 5
deck
• Recommended evenly distributed load capacity:
600# - 12” thru 22”
800# - 24” thru 28”
• Formed tag moulding on front edge
• Double row perforations front and rear
• See color chart for paint colors available
• Add base bulkhead (see page 36) for an additional
500 lbs capacity.
width
part number
wt.
price
12
14
16
18
20
22
24
28
30
30
30
30
30
30
30
30
01358-1230
01358-1430
01358-1630
01358-1830
01358-2030
01358-2230
01358-2430
01358-2830
5.9
6.9
7.9
8.5
9.1
9.2
11.5
13.4
23.45
24.85
29.15
31.45
34.75
36.50
41.30
47.35
12
14
16
18
20
22
24
28
36
36
36
36
36
36
36
36
01358-1236
01358-1436
01358-1636
01358-1836
01358-2036
01358-2236
01358-2436
01358-2836
6.8
7.5
9.2
9.8
10.5
11.1
12.9
15.3
23.45
24.85
29.15
31.45
34.75
36.50
41.30
47.35
12
14
16
18
20
22
24
28
48
48
48
48
48
48
48
48
01358-1248
01358-1448
01358-1648
01358-1848
01358-2048
01358-2248
01358-2448
01358-2848
8.8
10.2
11.9
14.2
15.0
16.5
15.9
19.7
28.15
33.30
35.60
41.85
45.45
47.20
53.70
58.25
depth
• Indicate left or right hand
• To order bottom arms leveled add L to the beginning of the part
number EX. L8704-1445 and add $2.60 per bottom arm.
• To level bottom arms yourself see page 36
02
07
cross components
2
[< ]
23
REV. 1.06
top cap
size
part number
wt.
price
30
36
48
08403-0214
08403-0213
08403-0212
2.2
2.6
3.4
8.70
8.70
10.80
• Used to cover top edge of back panel, fits into standards
• Has hole for superstructure post
replacement top cap
size
36
48
part number
-
wt.
price
2.7
3.1
-
• Needed to replace top cap when using extenders
with open backs
• Prices available upon request
tie bar
size
part number
wt.
price
30
36
48
08403-0208
08403-0207
08403-0206
1.3
1.5
2.1
5.65
5.65
7.05
• Used in gondola and wallcases at 51" and higher
slatwall tie bar
size
part number
wt.
price
36
48
08403-6756
08403-6757
1.6
1.7
5.75
6.25
• Needed to replace standard tie bar when unit has
slatwall back panels
cross tie
size
part number
wt.
price
30
36
48
08403-8180
08403-8181
08403-8182
1.8
2.1
2.8
7.45
7.45
10.70
• Used in gondola and wallcases to retain panel
24
[ >]
02
07
base components
floating kickplate
2
REV. 1.06
size
part number
wt.
price
30
36
48
08403-6549
08403-6550
08403-6551
3.1
3.7
5.0
12.90
12.90
16.40
• Snaps into bottom arms
electrical floating kickplate
size
part number
36
48
wt.
price
3.7
5.0
-
flush base
size
part number
wt.
price
30
36
48
08403-8175
08403-8176
08403-8177
3.3
3.8
4.6
33.60
33.60
37.90
• Finishes off units without base decks
base nose
size
part number
wt.
price
36
48
08403-6559
08403-6560
2.7
3.6
9.70
13.65
• Converts trimline fixture to trimguard fixture
• Provides extra bump protection for fixture
base nose end cap
size
-
part number
wt.
price
08403-6580
0.1
0.60
• Finishes end of base nose
• Snaps into place, priced individually
• Has knockout for electrical hook-up
02
07
back panels
2
[< ]
25
REV. 1.06
back panels
square cut back panels
width height part number
48
48
96
96
wt. price
08500-3250
08500-3251
31.0 47.40
32.6 43.55
• Solid (3251) or perf (3250)
• ¼" hardboard,
• Painted 1 face baked enamel
• Specify paint color
slatwall backs
solid back panels
perf back panels
wt.
price
wt.
price
30
30
30
56
61
86
08507-1214
08507-1215
08507-1218
9.8
10.9
15.9
30.75
33.95
43.50
30
30
30
56
61
86
08507-1314
08507-1315
08507-1318
9.3
10.3
15.1
34.65
39.60
57.35
36
36
36
36
36
36
36
36
38
51
56
61
66
71
86
96
08507-1272
08507-1222
08507-1224
08507-1225
08507-1226
08507-1227
08507-1228
08507-1230
7.6
10.6
11.8
13.1
14.3
15.5
19.1
21.6
20.90
28.65
30.75
33.95
43.50
47.15
50.95
61.25
36
36
36
36
36
36
36
36
38
51
56
61
66
71
86
96
08507-1372
08507-1322
08507-1324
08507-1325
08507-1326
08507-1327
08507-1328
08507-1330
7.2
10.1
11.2
12.4
13.6
14.7
18.1
20.5
22.50
32.55
34.80
39.60
45.10
46.45
57.35
64.45
48
48
48
48
48
48
48
48
38
51
56
61
66
71
86
96
08507-1281
08507-1232
08507-1234
08507-1235
08507-1236
08507-1237
08507-1238
08507-1240
10.1
14.2
15.9
17.5
19.1
20.8
25.7
29.0
21.10
31.80
34.00
34.00
44.35
50.80
56.50
63.50
48
48
48
48
48
48
48
48
38
51
56
61
66
71
86
96
08507-1381
08507-1332
08507-1334
08507-1335
08507-1336
08507-1337
08507-1338
08507-1340
9.6
13.5
15.1
16.6
18.2
19.7
24.4
27.5
23.30
33.70
36.10
41.40
46.70
48.00
59.50
66.95
• ¼" hardboard,
(30" only come in color 15)
• ¼" hardboard
• Available in painted baked enamel
• Specify paint
color (30" in color 15 only)
wt.
price
36
36
36
36
36
36
36
51
56
61
66
71
86
96
-
27.2
29.8
32.4
35.1
37.8
41.0
47.3
-
48
48
48
48
48
48
48
51
56
61
66
71
86
96
-
36.2
39.7
43.3
46.8
50.4
54.5
63.9
-
slatwall w/steel T–slot inserts
36
36
36
36
36
36
36
51
56
61
66
71
86
96
-
42.6
46.7
50.9
55.1
59.3
64.3
75.7
-
48
48
48
48
48
48
48
51
56
61
66
71
86
96
-
56.9
62.3
67.9
73.4
79.1
85.5
99.2
-
• Painted finish, with or without steel T–slot
inserts. T-slots 3" o.c.
• ¾" MDF, unfinished on back side
• Requires slatwall tie bar, see page 23
26
[ >]
02
07
extender back panels
2
REV. 1.06
wt.
36
36
36
36
05
10
15
25
08507-5742
08507-4507
08507-4508
08507-4510
1.2
2.4
3.6
6.1
48
48
48
48
05
10
15
25
08507-5743
08507-4520
08507-4521
08507-4523
1.6
3.2
4.9
8.1
• ¼" hardboard,
H–channel
perf back panels
solid back panels
wt.
price
-
36
36
36
36
05
10
15
25
08507-5736
08507-4468
08507-4469
08507-4471
1.1
2.3
3.4
5.8
-
48
48
48
48
05
10
15
25
08507-5737
08507-4481
08507-4482
08507-4484
1.5
3.1
4.6
7.7
price
wt.
price
-
36
36
36
36
05
10
15
25
-
-
-
-
48
48
48
48
05
10
15
25
-
-
-
• ¾" MDF
• Painted finish, with or without steel
T–slot inserts. T-slots 3" o.c.
• Requires slatwall tie bar, see page 23
• ¼" hardboard,
size
part number
wt.
price
30
36
48
08601-0223
08601-0224
08601-0225
.1
.1
.1
2.65
3.05
3.70
• Used to join 2-piece back panels
• Colors available KM, 25,15,clear
extender back panels
02
07
standard & heavy duty shelves
2
REV. 1.06
standard 4–position shelf
shelf
depth
30”
36”
48”
10
12
14
16
18
20
22
350
500
500
500
500
-
400
500
500
500
500
400
350
400
500
500
500
500
400
350
Load capacities listed represent the maximum
evenly distributed weight that is recommended for
each shelf. Reduce capacities by 30% if only the
front of the shelf is to be loaded.
heavy duty 2–position shelf
27
width
part number
wt.
price
10
12
14
16
18
30
30
30
30
30
01346-1030
01346-1230
01346-1430
01346-1630
01346-1830
5.6
7.3
8.0
9.2
9.9
17.35
21.00
23.60
26.95
28.70
10
12
14
16
18
20
22
36
36
36
36
36
36
36
01346-1036
01346-1236
01346-1436
01346-1636
01346-1836
01346-2036
01346-2236
7.4
8.3
9.1
10.6
11.3
12.1
12.8
20.80
23.10
25.55
29.60
31.60
34.75
37.25
10
12
14
16
18
20
22
48
48
48
48
48
48
48
01346-1048
01346-1248
01346-1448
01346-1648
01346-1848
01346-2048
01346-2248
9.2
10.2
10.4
13.3
15.6
16.6
17.5
25.05
27.85
depth
load limits (lbs.)
[< ]
• One piece shelf pan with 1¼” ticket moulding
• Four–position brackets, 12° upslant, level, 15° & 30° downslant
• ½” Double row perforations 1” on center front and rear
• Textured steel
width
part number
wt.
price
22
24
28
36
36
36
01347-2236
01347-2436
01347-2836
15.6
17.7
20.8
51.30
57.40
71.15
22
24
28
48
48
48
01347-2248
01347-2448
01347-2848
20.4
22.9
22.9
63.80
71.15
83.55
depth
• One piece shelf pan with 1¼” ticket moulding
• Two–position brackets, level, 20° downslant
• ½” Double row perforations 1” on center front and rear
• Textured steel
load limits (lbs.)
shelf
depth
36”
48”
22
24
28
600
600
600
600
600
600
Load capacities listed represent the
maximum evenly distributed weight
that is recommended for each shelf.
Reduce capacities by 30% if only
the front of the shelf is to be loaded.
34.00
36.05
41.90
45.45
47.90
28
[ >]
02
07
shelving options
3” wire fencing
2
REV. 1.06
size
part number
wt.
price
0.9
1.2
10.00
11.50
0.3
0.4
0.4
0.5
0.5
5.00
5.00
5.00
5.50
6.00
front & back fencing
36
48
08303-0067
08303-0068
front to back fencing
10
12
14
16
18
08303-0079
08303-0080
08303-0081
08303-0082
08303-0083
• Chrome plated
• 3” tall
size
part number
wt.
price
36
08445-3140
14.7
18.40
48
08445-3141
19.2
25.45
•
•
•
•
•
book shelf
7½” tall back
Usable space 3” less than the nominal shelf depth
Hooks into back row of perfs on shelf
Order shelves separately
See color chart for paint colors available
size
part number
wt.
price
36
48
08701-1230
08701-1212
-
55.95
57.45
• 8” tall back
• 8” deep
shelf key
size
part number
wt.
price
-
08410-0027
0.1
0.75
• Keeps shelves in alignment when heavy loads are on
the shelf
• Zinc finish
product retainer
size
part number
wt.
price
30
36
48
08402-4771
08402-4772
08402-4773
0.8
0.9
1.0
5.05
5.80
7.15
• 1” tall steel installs into the front row of perforations
on the shelf
book shelf adapter
02
07
shelving options
2
REV. 1.06
glass shelf components
depth width
part number
29
[< ]
wt.
price
08401-0156R/L
08401-0158R/L
.9
.9
10.15
11.20
-
08415-9204
08415-9208
1.3
1.8
8.90
10.05
36
36
48
48
16002-1236
16002-1436
16002-1248
16002-1448
9.8
10.1
11.5
13.4
33.00
33.50
37.50
43.50
-
00063-2025
1oz
5.90
glass shelf brackets
12
14
-
support channel
36
48
glass top
12
14
12
14
silicone
-
• Specify left or right for brackets
• Order 1 pair of brackets, 1 support channel, 1 glass
top, & 1 tube of silicone per shelf asselmbly
• 2 position brackets, level and 20° downslant
endless wire basket
depth width
part number
wt.
price
12
14
16
36
36
36
08303-1935
08303-1934
08303-1933
8.1
8.5
9.0
-
12
14
16
48
48
48
08303-1928
08303-1927
08303-1926
9.8
10.8
11.5
-
08303-1946
08303-1945
08303-1944
0.9
1.1
1.3
-
wire dividers
12
14
16
reversible wire shelves
-
• 8½” tall back, 6” sloped front
• Chrome finish
• Order wire dividers separately
• Order brackets separately (see below)
• Weight capacity on all sizes is 300 lbs., uniform load
part number
wt.
price
18
20
22
24
36
36
36
36
08303-1959
08303-1958
08303-1957
08303-1956
6.6
6.7
6.9
7.0
-
18
20
22
24
48
48
48
48
08303-1952
08303-1951
08303-1950
08303-1949
8.2
8.4
8.6
8.7
-
depth width
• Chrome finish
• Order brackets separately (see below)
• Weight capacity on all sizes is 150 lbs., uniform load
basket/shelf brackets
•
•
•
•
Specify left or right
Order same size as shelf
See color chart for available colors
Prices available upon request
size
part number
wt.
12
14
16
18
20
22
24
08706-0424R/L
08706-0425R/L
08706-0426R/L
08706-0427R/L
08706-0428R/L
08706-0429R/L
08706-0430R/L
1.5
1.9
2.1
2.3
2.5
2.7
2.9
price
-
30
[ >]
02
07
contour end base
2
REV. 1.06
Example catalog part number
CEB 18 46 TG G 15 13
base component color (025 or 013)
deck color (see color chart)
(L)leveled or (G)not leveled
(TG)trimguard or (TL)trimline
nominal length
nominal depth
contour end bases
fits
depth
width
part number
wt.
price
12/12
14
26
CEB1426
17.8
102.45
14/14
14/14
14/14
14
16
18
30
30
30
CEB1430
CEB1630
CEB1830
19.9
20.9
21.9
106.55
113.85
117.50
16/16
16/16
16/16
14
16
18
34
34
34
CEB1434
CEB1634
CEB1834
21.9
22.9
24.0
111.75
116.70
121.00
18/18
18/18
18
24
38
38
CEB1838
CEB2438
26.2
30.8
127.70
141.65
20/20
20/20
18
24
42
42
CEB1842
CEB2442
29.5
34.5
139.30
150.90
22/22
22/22
18
24
46
46
CEB1846
CEB2446
31.7
37.0
143.70
158.25
• Used at the end of a run
• Shipped assembled
• Designate paint color for deck and paint color for base parts.
• Add $9.80 per contour end base if leveled
• Add $36.85 per contour end base for the trimguard option
contour end base
02
07
feature end frames
3
[< ]
31
REV. 1.06
FE 36 51 PP SO 15 15 15
interior back panel color (see color chart)
exterior back panel color (see color chart)
feature end frame color (see color chart)
interior back panel (PP-Perf, SO-Solid, SW-Slatwall)
exterior back panel (PP-Perf, SO-Solid, SW-Slatwall)
nominal height
nominal width
feature end frame
feature end frame
width
height
part number
wt.
price
30
30
30
30
30
30
51
56
61
66
71
86
FE3051
FE3056
FE3061
FE3066
FE3071
FE3086
17.9
19.1
20.2
21.4
24.3
26.1
82.40
86.80
89.85
95.10
93.70
109.70
36
36
36
36
36
36
51
56
61
66
71
86
FE3651
FE3656
FE3661
FE3666
FE3671
FE3686
19.4
20.5
21.7
22.9
23.9
27.6
86.45
90.85
93.90
99.15
101.35
113.75
48
48
48
48
48
48
51
56
61
66
71
86
FE4851
FE4856
FE4861
FE4866
FE4871
FE4886
22.3
23.5
24.7
25.8
26.8
30.5
93.80
98.20
101.25
106.50
108.70
121.10
• Used at the end of a run with or without a contour end base
• Shipped assembled with one or two back panels.
• Feature end frame hardware pack (sold separately) is required to
attach frame to a standard gondola (see below).
feature end frame hardware
part number
wt.
price
t–brace
01611-0332
1.0
90° t–brace
01611-0335
1.4
9.75
13.20
• Used to secure feature end frame to end of run
• 90° t–brace is used with feature end frame that is
5” shorter than the height of the run
32
[ >]
02
07
feature end frame components
3
REV. 1.06
sign stem fitting
size
part number
wt.
-
08302-0002
-
price
.50
• Required on feature end top rails
feature end frame top channel
size
part number
wt.
price
30
36
48
08403-8391
08403-8392
08403-8393
2.7
3.6
4.3
8.80
10.20
13.20
feature end frame side rail
size
part number
wt.
price
51
56
61
66
71
86
08800-2355
08800-2356
08800-2357
08800-2358
08800-2359
08800-2364
5.3
5.9
6.4
6.8
7.1
7.5
20.05
22.25
23.75
26.40
27.50
33.70
• Rails priced individually
• Specify paint color (see color chart)
feature end frame bottom angle
size
part number
wt.
price
30
36
48
08405-0891
08405-0892
08405-0893
-
15.05
17.65
22.00
• Used at the bottom of the feature end frame to secure
the side rails and back panels as well as mount the
feature end frame to the gondola run
feature end frame hardware
description
part number
wt.
#10-24 x 1/2” PFH MS.
1/4”-20 x 1/2” TH screw
00060-1060
00060-1076
-
• Used to secure feature end frame components
together and secure feature end frames to gondolas
price
.10
.10
• Used at the top of the feature end frame to secure
side channels and back panels
02
07
feature end frame back panels
3
[< ]
33
REV. 1.06
feature end frame back panels
solid back panels
width depth part number
perf back panels
wt.
price
wt.
price
wt.
price
30
30
30
30
30
30
51
56
61
66
71
86
08583-3051
08583-3056
08583-3061
08583-3066
08583-3071
08583-3086
8.5
8.5
10.5
11.5
12.5
15.5
28.70
30.55
42.95
48.50
51.10
63.80
30
30
30
30
30
30
51
56
61
66
71
86
08582-3051
08582-3056
08582-3061
08582-3066
08582-3071
08582-3086
8.1
8.1
10.0
10.9
11.9
14.7
30.40
32.50
45.15
50.75
56.40
65.65
30
30
30
30
30
30
51
56
61
66
71
86
-
-
-
36
36
36
36
36
36
51
56
61
66
71
86
08583-3651
08583-3656
08583-3661
08583-3666
08583-3671
08583-3686
10.2
11.4
12.7
13.9
15.1
18.7
33.60
34.65
44.95
53.35
54.40
66.15
36
36
36
36
36
36
51
56
61
66
71
86
08582-3651
08582-3656
08582-3661
08582-3666
08582-3671
08582-3686
9.7
10.9
12.0
13.2
14.3
17.8
34.40
36.65
47.15
54.30
57.90
69.75
36
36
36
36
36
36
51
56
61
66
71
86
-
-
-
48
48
48
48
51
56
61
66
71
86
08583-4851
08583-4856
08583-4861
08583-4866
08583-4871
08583-4886
13.7
15.4
17.0
18.6
20.3
25.1
40.45
43.90
48.95
55.00
48
48
48
48
48
48
08582-4851
08582-4856
08582-4861
08582-4866
08582-4871
08582-4886
13.0
14.7
16.2
17.7
19.2
23.9
42.65
45.90
51.10
57.25
59.40
67.50
51
56
61
66
71
86
48
48
48
48
48
48
51
56
61
66
71
86
-
-
-
48
48
• ¼" hardboard,
• Painted 2 faces baked enamel
• ¼" hardboard
• ¼" perforations spaced 1” o.c.
60.65
75.60
• 3/4" MDF
• T–slots are spaced 3” o.c.
• Also available with steel T–slot inserts
34
[ >]
02
07
4–way
3
REV. 1.06
metal top panel
end
frame
width
30
36
base
size
part number
wt.
price
46”
54”
08445-3509
08445-3510
7.3
8.0
45.85
57.75
00060-1370
-
hardware
10-16 x 3/4” tek
-
• 8 tek screws required per top panel
4–way feature end frames
height
width
51
61
30
30
51
61
36
part number
wt.
price
4F3061
12.8
15.1
58.20
65.45
4F3651
4F3661
13.8
16.1
69.75
77.00
4F3051
36
interior back panel color (see color chart)
4F 30 51 PP SO 15 15 15
exterior back panel color (see color chart)
interior back panel (PP-Perf, SO-Solid, SW-Slatwall)
exterior back panel (PP-Perf, SO-Solid, SW-Slatwall)
nominal height
• Free–standing merchandising unit
• Not shipped assembled
• For a complete unit order:
1- 4–way base
4- 4–way feature end frames
1- Metal top panel
8- 4–way back panels
8- Tek screws
8- 4–way anchor clips
8- 10 x 5/8” PHA screw
nominal width
4–way feature end frame
wood base
end
frame
width
30
36
base
size
part number
wt.
46”
54”
08711-3316
08711-3317
85.8
85.8
price
548.05
548.05
• Available in (0KM) K6-dove gray, (0LA) K9-frosty white,
(015) H8 antique white, (025) K7-black, and (PP) KR-almond
• All bases are on casters
4–way back panels
solid backs
height
part number
wt.
price
30
30
51
61
08583-0020
08583-0022
8.5
10.5
28.70
42.95
36
36
51
61
08583-0025
08583-0027
10.3
12.7
33.60
44.95
width
shelves
end
frame
width
base
size
part number
wt.
price
30”
36”
46”
54”
01346-1030
01346-1236
5.2
7.7
16.50
22.00
perf backs
• Above reflects maximum suggested shelf sizes
30
30
51
61
08582-0001
08582-0003
8.1
10.0
30.40
45.15
51
61
08582-0006
08582-0008
9.8
10.1
34.40
47.15
4–way hardware
description
anchor clip fwd
10 x 5/8” PHA screw
part number
wt.
price
36
36
08445-3016
00060-1123
.3
.1
3.10
.10
• Also available in slatwall with pricing available
upon request
feature end frame color (see color chart)
02
07
security case components
3
35
[< ]
REV. 1.06
glass door assembly
height
50
71
86
width
part number
wt.
48
48
48
08721-3123
08721-3125
08721-3131
-
price
770.20
951.70
1024.35
• Sliding doors in aluminum frame
• Size stated above is nominal frame size
• Specify aluminum trim color: 95 (natural)
metal end panels
width
part number
wt.
price
50
71
86
18
18
18
08721-3359
08721-3368
08721-3386
-
40.65
69.80
79.40
50
71
86
20
20
20
08721-3360
08721-3387
08721-3361
-
55.10
99.00
99.00
50
71
86
22
22
22
08721-3362
08721-3370
08721-3388
-
63.15
97.85
103.60
height
•
•
•
•
Side panels for use on existing gondola or wallcase
Baked enamel paint finish, specify color
Specify left hand or right hand (i.e. 08721-3388L or R)
Do not order a metal end panel wider than the depth
of the base deck on unit
security case hardware
description
• For a complete unit order:
1- glass door assembly
1- left metal end panel
1- right metal end panel
2- standard shelves (if placed on
deck only 1 shelf is required)
1- hdwe pk sec
1- hdwe pk sec ep
2- straps
1- gap filler
• More than one glass door assembly can
be used with a single set of end panels
hdwe pk sec
hdwe pk sec ep
gap filler
strap
part number
01611-0432
01611-0433
08603-3437
08445-1317
wt.
-
price
2.05
5.15
6.85
6.45
36
[ >]
02
07
accessories
cover plate
3
REV. 1.06
size
part number
wt.
price
-
08302-0593
0.1
0.50
• Vinyl cover plate plugs hole in top cap
• Receives stem of sign holder
base bulkhead
depth
part number
wt.
price
20
08704-2131
3.3
18.90
glides
description
standard glide
bottom arm glide
part number
wt.
price
01611-0541
01611-0540
-
57.75
57.75
part number
wt.
price
08308-0164
08308-0237
-
0.40
1.05
• Glides are used to protect flooring
• Price reflects quantities of 100
leveler
description
leveler
j–nut retainer
• Used to level gondola unit
top cap bracket
size
part number
wt.
price
-
08415-0788
-
0.80
• Drops into place at the top of the standard as an
anchor for the top cap
• Required on end gondolas receiving a feature
end frame
• Used to reinforce gondolas using casters
• Used to increase load capacity of deck by 500 lbs.
• Placed midway between base brackets
• Includes levelers
02
07
accessories
3
[< ]
37
REV. 1.06
heavy duty wallmount standard
size
part number
wt.
price
86
96
01600-0013
01600-0014
8.4
9.3
29.85
33.05
• U-channel standards attach to wall
• Identical slotting as regular standards
slimline wallmount standard
size
part number
wt.
price
41
86
01600-0221
01600-0227
2.0
4.5
15.30
24.15
• 7/8" depth
• 1¼" slotting
super structure post
• For a complete super structure order:
1- post
1- “u” bar
1- locking key
super structure “u” bar
size
part number
wt.
price
45
60
08712-2429
08712-3024
5.5
6.9
42.50
42.50
• Exposed above top cap
• Slotting 1¼" on center
• Super structure standard should be ordered 10"
shorter than the gondola height
size
part number
wt.
price
56
61
66
71
08403-7928
08403-7929
08403-7930
08403-7931
2.0
2.0
2.2
2.4
8.50
9.00
9.55
10.05
• Supports super structure standard internally
between top cap and cross tie
super structure locking key
size
part number
wt.
price
-
08403-0091
0.1
.60
• Secures super structure standard at desired height
38
[ >]
02
07
caster components
3
REV. 1.06
caster channel
size
part number
wt.
price
contour end base channels
30
08445-2268
34
08445-2269
38
08445-1693
42
08445-2270
46
08445-2271
2.8
3.3
3.7
4.2
4.7
14.00
16.30
10.60
18.55
19.45
gondola channels
36
08445-1693
48
08445-1692
3.7
5.1
11.15
15.40
• 3 caster channels are required per full gondola
• 2 caster channels are required per half gondola
• 1 caster channel is required per contour end base
caster brace
size
part number
wt.
-
08445-2559L
08445-2559R
2
2
price
4.75
4.75
caster
size
part number
wt.
price
-
T8308-0280
1.0
9.20
• Two casters per channel are required for gondola
starter units and contour end bases
• Only one caster per channel is required for gondola
add–on units
caster hardware
contour end base hardware (per caster channel)
part number
00060-1157
00060-1275
00060-1171
08308-0297
00060-1240
description
qty.
5/16-18 hexnut
split lock washer
capscrew 5/16-18”
U–nut retainer 5/16”
5/16 washer
4
4
2
2
2
price
.10
.10
.20
1.00
.10
gondola hardware (per caster channel)
• For a complete caster assembly order:
1- caster channel
1- left and right caster brace
2- casters
Minimum required hardware (see right)
• Visit www.streater.com and review the
caster assembly instructions for required
hardware on gondola fixtures.
part number
description
00060-1157
00060-1275
00060-1171
08308-0297
00060-1240
08445-1720
5/16-18 hexnut
split lock washer
capscrew 5/16-18
U–nut retainer 5/16”
5/16 washer
spacer plate
qty.
-
price
.10
.10
.20
1.15
.10
4.00
• 1 left and 1 right caster brace is required per
caster channel
02
07
accessories
3
[< ]
39
REV. 1.06
top cap anchor bracket
size
part number
wt.
price
-
08403-2001
0.2
1.35
• Painted top cap anchor grips wallcase top cap & is
fastened to the wall
• Zinc finish
• Fasteners not included
size
part number
wt.
price
-
08403-0789
0.2
1.00
• Grips the verticle edge of standard and is fastened to
the wall
• 12 ga. steel, zinc finish
end bottom arm tie down
size
part number
wt.
price
-
08403-6442
0.1
1.70
• Ties the end bottom arm to the floor from inside base
area, not seen when unit is assembled
center bottom arm tie down
size
part number
wt.
price
-
08403-6143
0.1
.85
• Straps center bottom arm to the floor
upright & bottom arm tie down
size
part number
wt.
price
-
08415-4724
0.2
8.40
• Anchor secures upright or bottom arm leveler leg to
the floor, using customer supplied anchor bolts.
• Must be used when shelving unit exceeds a height–
to–depth ratio of 6:1
• Available in color 025 (black) only
40
[ >]
02
07
cornice
3
REV. 1.06
telescoping cornice bracket
L/R bracket
(08706-0032)
size
part number
wt.
price
-
08706-0032R
08706-0032L
08706-0033
2.0
2.0
1.1
51.95
51.95
24.30
00060-1123
.1
.10
hardware
Tip
(08706-0033)
metal cornice front
-
• Hooks into upright
• Telescopes 20” to 34”
• See color chart for available colors
• For each L/R bracket order 1 Tip (08706-0033) and
1 screw (00060-1123)
size
wt.
price
36
48
part number
-
6.7
10.0
-
86
-
20.0
-
metal cornice return
size
16”-25”
25”-35”
part number
-
wt.
price
8.9
10.2
-
• Matches metal cornice front
metal cornice shelf mount bracket
size
part number
wt.
price
-
08800-1869
2.3
-
•
•
•
•
Used to attach metal cornice to a shelf top
2 brackets are required per starter unit
1 bracket is required per add–on unit
Prices available upon request
• 8” high with 3” bottom flange
• Flanges at each end for connecting segments
02
07
accessories
3
[< ]
41
REV. 1.06
cross bar
depth width part number
1
3
6
8
48
48
48
48
01606-0479
01606-0483
01606-0487
01606-0491
wt.
price
-
59.95
65.25
69.55
73.95
hangrod assembly
size
part number
wt.
price
12
14
01602-0075R/L
01602-0076R/L
-
13.95
13.95
08301-0309
08301-0310
-
21.70
21.70
00060-1507
08301-0152
-
0.20
1.05
hangrod
36
48
hardware
-
• Brackets in 12” and 14” depths
• Chrome plated rod
• For each R/L bracket order 2 screws (00060-1507)
• For each hangrod order two end caps (08301-0152)
flange bracket
size
part number
wt.
price
10
14
18
22
08401-0188R/L
08401-0189R/L
08401-0190R/L
08401-0191R/L
1.2
1.7
2.2
2.6
10.95
14.85
16.25
18.55
• 1 position
• Specify right or left
touch–up paint
description
015–decor white
0PP–platinum plus
0KM–dove gray
013–dark bronze
025–black
0LA–frosty white
0MT–liberty red
part number
wt.
price
00014-3183
00014-3193
00014-3189
00014-3185
00014-3186
00014-3196
00014-3190
12 oz
12 oz
12 oz
12 oz
12 oz
12 oz
12 oz
42.45
42.45
42.45
42.45
42.45
42.45
42.45
• Available in colors listed only
• Available in aerosal only
42
[ >]
02
07
WireFlex™
3
REV. 1.06
WireFlex™ wall
width
height
price
part number
wt.
84
84
84
01105-0001
01105-0002
01105-0003
-
299.70
372.25
731.10
84
84
84
01105-0009
01105-0010
01105-0011
-
281.70
354.25
713.10
starter
32
48
96
add–on
32
48
96
WireFlex™ island
width
height
price
part number
wt.
01105-0004
01105-0005
01105-0016
01105-0006
-
766.70
900.00
1316.30
1437.60
-
47.45
island
32
48
64
80
84
84
84
84
solid end cap back panel
18
84
01105-0008
wire end cap back panel
18
84
01105-0007
-
223.60
-
01610-2250
-
10.20
levelers
-
• Islands include wire grid, 2 end panels and 2 top and bottom
mounting channels.
• 64" & 80" kits include vertical channel grid support
• Solid painted panel or WireFlex panel available to insert
into metal end panels; order separately
• Color (0LA) white baked enamel finish
• Optional base decks available for side(s) and/or end(s);
not necessary for support of island
• Starters include wire grid, 2 end caps and top and bottom
mounting channels
• Add–ons include wire grid, vertical channel grid support, and
top and bottom mounting channels
• 96” units includes vertical channel grid support
• Color 0LA (white) baked enamel only
02
07
WireFlex™ components
3
[< ]
43
REV. 1.06
WireFlex™ base deck
size
part number
wt.
price
16
32
48
08445-2063
08445-2064
08445-2065
-
20.70
33.95
48.65
• 7” deep
• Color LA (white)
WireFlex™ shelf
size
part number
wt.
price
16
08445-2092
-
12.50
• 7” deep
WireFlex™ speedwall
size
part number
wt.
price
36
48
08709-4398
08709-4390
-
165.15
179.50
part number
wt.
price
01600-0216
-
11.25
• Fits Ultra uprights
• Wires spaced 1” apart
• 12” tall
wallmount standard
height
15
• 1¼” on center slotting
44
[ >]
02
07
WireFlex™ accessories
3
REV. 1.06
akro bin
size
part number
wt.
price
08302-1943
08302-1970
-
22.70
22.70
08302-1945
-
23.80
blue
11x8x7
11x11x15
white
11x8x7
• Attaches to speedwall and WireFlex™
reinforced crossbar
size
part number
wt.
price
36
48
08709-4421
08709-4422
-
152.80
176.25
• Fits on wallmounts and regular standards
vial cap bin
size
part number
wt.
price
6”x10”
08445-2111
-
24.70
part number
wt.
price
-
-
-
monitor tray
size
16”x18”
• Attaches to reinforced crossbar
telephone tray
size
part number
wt.
price
-
-
-
wt.
price
08302-1867
-
-
08302-1868
-
-
12”x12”
tray divider
size
part number
channel track
-
divider
-
• Divides tray into smaller sections
• Clear acrylic
02
07
bottle bay components
4
[< ]
45
REV. 1.06
2
6
4
4
5
1
9
3
1. Double bottle bay end panels
8
5. Single bottle bay panels
two per module
2. Double bottle bay top
two per module (finished and unfinished)
6. Single bottle bay top
one per module
3. Double bottle bay bottom
one per module
4. Back panel
one per module
7
one per module
7. Single bottle bay bottom
one per module
8. Single bottle bay base cover
one per module
9.
Single bottle bay back brace
one per module
10. Hardware pack
one per module
46
[ >]
02
07
4
REV. 1.06
double bottle bay end panels
size
part number
wt.
price
85
08415-0661
15.4
317.00
• Height: 85-1/4"
• Depth: 15"
• All steel construction, LA (frosty white)
• Steel end unfinished
• Melamine overlay end panels available
double bottle bay bottom
size
part number
wt.
price
24
29
36
44
08415-0665
08415-0664
08415-0663
08415-0662
11.3
11.3
11.3
15.0
98.00
114.50
102.00
110.00
double bottle bay top
size
part number
wt.
price
24
29
36
44
08415-0669
08415-0668
08415-0667
08415-0666
6.0
7.5
9.0
12.0
71.50
74.50
96.00
117.00
• Unit widths: 24", 28-5/16", 36", 43-11/16"
• Depth: 15"
• All steel construction, 0LA (frosty white)
bottle bay backs
size
part number
wt.
price
15
24
29
36
44
41223-1582
08507-0006
08507-0007
08507-0005
08507-0008
9.3
14.2
16.2
20.6
25.0
20.00
39.70
40.70
54.25
59.80
• Available in sizes for single and double bottle bays,
as well as 2 single bottle bays back-to-back
• Height: 85¼"
• Color: LA (Frosty White)
• Unit widths: 24", 28-5/16", 36", 43-11/16"
• Depth: 15"
• All steel construction, 025 (black)
02
07
4
[< ]
47
REV. 1.06
single bottle bay end panels
size
85
part number
wt.
price
24156-0000R/L
8.5
199.00
85-1/
• Height:
4"
• Depth: 7¾”
• Steel end unfinished
• Melamine overlay end panels available
single bottle bay top
size
part number
wt.
price
15
24
29
36
44
24152-0015
24152-0024
24152-0029
24152-0036
24152-0044
1.9
3.0
3.7
4.9
7.4
28.00
43.50
42.00
46.50
66.00
• Depth: 7¾”
single bottle bay bottom
size
part number
wt.
price
15
24
29
36
44
24151-0015
24151-0024
24151-0029
24151-0036
24151-0044
2.9
3.8
5.0
5.7
7.5
28.00
38.50
47.50
51.00
60.00
• Depth: 7¾”
single bottle back brace
size
part number
wt.
price
15
24
29
36
24153-0015
24153-0024
24153-0029
24153-0036
2.3
1.5
1.9
2.3
28.50
34.50
36.00
44.50
44
24153-0044
3.0
48.00
• Depth: 7¾”
48
[ >]
02
07
bottle bay overlay end panels
4
REV. 1.06
style
part number
wt.
price
single
double
43417-0885
43417-1585
14.4
21.0
108.60
134.70
00060-1108
.1
.10
hardware
screws
•
•
•
•
single bottle bay base cover
Height: 85-1/4"
K9 (frosty white melamine)
Melamine construction
Order eight (8) screws per end panel
style
part number
wt.
price
single
24229-0000
.6
10.50
bottle bay shelves
size
part number
wt.
price
15
24
29
36
44
01207-0001
01207-0002
01207-0003
01207-0004
01207-0005
1.1
1.8
2.1
2.7
3.2
5.55
8.20
8.95
10.80
13.80
bottle bay hardware pack
size
part number
wt.
price
-
01610-2287
.3
15.55
• Order 1 hardware pack per module
02
07
4
REV. 1.06
basic open unit
[< ]
49
size
part number
wt.
-
08726-0001
57.8
price
430.05
• Customize with any accessory
dual shelf cabinet
size
part number
wt.
-
08726-0005
71.2
price
488.80
• Includes 2 adjustable shelves
waste cabinent
size
-
part number
08726-0079R/L
• Specify R/L hand door
wt.
71.2
price
528.85
50
[ >]
02
07
locked drawer cabinet
4
REV. 1.06
size
part number
wt.
price
-
08726-0007
100.3
700.15
• Includes adjustable shelf
drawer & half door cabinet
size
-
part number
08726-0009R/L
wt.
price
-
815.25
price
4 drawer accessory cabinet
size
part number
wt.
-
08726-0004
81.4
1374.15
• Includes adjustable shelf
• All handles are included
02
07
4
REV. 1.06
5 drawer accessory cabinet
51
[< ]
size
part number
wt.
-
08726-0012
-
price
1427.80
• Top drawer includes lock
sink cabinet
size
-
part number
08726-0023R/L
wt.
price
111.8
567.15
• Does not include sink
printer cabinet
size
part number
wt.
price
-
08726-0022
161.6
885.60
• Printer drawer is longer to allow greater extension of
the drawer
• Printer shelf is 22½” wide and 28” deep
52
[ >]
02
07
3 drawer vial/bottle cabinet
4
REV. 1.06
size
part number
wt.
-
08726-0024
169.2
price
1439.85
• Each drawer has 4 adjustable dividers
half modular cabinet
size
part number
wt.
price
-
08726-0011
241.2
412.80
printer pullout cabinet
size
part number
wt.
-
08726-0021
203.7
price
885.60
• Full extension slides allow easy access to back of
printer
• 12” wide
• CPU pull–out drawer available
02
07
4
REV. 1.06
3 drawer locked narcotics cabinet
size
-
part number
08726-0015R/L
[< ]
53
wt.
price
151.4
1264.10
• Completely closed back
over sink cabinet
size
part number
wt.
price
-
08726-0016
147.4
597.05
• 30” tall; 28” wide; 11” deep
• 2 adjustable shelves
5 drawer RX cabinet
size
part number
wt.
-
08726-0013
132.8
price
2282.60
• 4 bottom drawers divided into 3 sections with card
follower system
• Top drawer includes lock
54
[ >]
02
07
under counter accessories
counter top
4
REV. 1.06
size
part number
wt.
price
8’
10’
08711-3074
08711-3075
51.5
64.4
439.00
484.70
•
•
•
•
•
backsplash
30” wide, 13/16” thick
2–2½” diameter holes spaced 12” from each end
Gromet covers included
High pressure laminate J3 (frosty white)
Sides machined for easy assembly
size
part number
wt.
price
8’
10’
08726-0027
08726-0028
7.0
8.6
113.55
128.55
high rise end panel
size
part number
wt.
price
-
08500-7331
21.4
229.70
• 30” deep, 42” tall
• High pressure laminate J3 (frosty white)
• Used to finish off a run of cabinets that do not
terminate at a wall
adjustable shelf
size
part number
wt.
price
-
08522-0400
8.3
68.40
• 4” high, 13/16” thick
• High pressure laminate J3 (frosty white)
• Top edge laminated
02
07
back room components & information
4
[< ]
55
REV. 1.06
backroom system
The slimline upright and shelf support of Streater's
backroom storage shelving system offers easy
assembly, strength and durability at an economical
price. Factory assembled uprights,
7/8" wide, are slotted on the sides to receive the shelf
supports. Interchangeable front and rear shelf supports
protect the edge of the shelf and are adjustable on 1¼"
increments. The particle board shelf may be removed
or replaced without removing the shelf supports.
Local codes concerning fire regulations, sanitation
regulation and /or seismic certifications may apply to
some installations. Check with your local building
authorities to determine what codes, if any, may
apply.
PRICES AVAILABLE UPON REQUEST
outrigger system
This system is designed for hand loading only.
PLEASE NOTE: Personnel must be provided with
safe access to all elevations of storage equipment or
display fixtures via ladders, stairways or other means,
in accordance with applicable OSHA regulations. In
no case should anyone be allowed to climb or stand
on storage or display equipment.
[ >]
outrigger & widespan
02
07
4
REV. 1.06
widespan
This system is designed for hand loading only.
PLEASE NOTE: Personnel must be provided with
safe access to all elevations of storage equipment or
display fixtures via ladders, stairways or other means,
in accordance with applicable OSHA regulations. In
no case should anyone be allowed to climb or stand
on storage or display equipment.
56

Ultra2007 File1of4.pmd

Transcription

Similar documents

EIUS Uni Knee System Surgical Technique (Stryker)

INSTOCK FURNITURE

Supermarket Equipment Etc., Inc. Stocking Distributor of Lozier

Streater - ADAMS, INC.

Page 5 - Easy Ride Golf Cars

D:\ESCO\PMFILES\May-June 03.p65