**Price List 12.indb

Comments

Transcription

**Price List 12.indb
THE ITALIAN SIGN OF MOTODESIGN
USA PRICE LIST _ JANUARY 2012
2
THE ITALIAN SIGN OF MOTODESIGN
INDEX
COMPANY
HARD BAGS
FITTING FORM SOFT BAGS
AIRSTARS &
SPOILERS
02 > 09
10 > 22
23 > 29
30 > 41
42 > 51
The history, the
philosophy, the
technology
The hard bags
range Monokey®,
Monokey® Side
and Monolock®
The fitment Kits
for the hard bags
Monokey®,
Monokey® Side
and Monolock®
The soft luggage
range
Wind-screens for
naked, sports and
touring motorcycles
and scooter
ACCESSORIES BACKRESTS & GALLERY
ENGINE GUARDS
APPLICATION SPARE PARTS
CHART
52 > 54
55 > 56
57 > 68
69 > 86
87 > 104
Lots of small
accessories which
can simplify the life
Backrests and
engine guards
Some examples of
our range of
products applied on
the most widespread
motorcycles and
scooters
The specific
application chart
subdivided into
motorcycle makes
Specific parts
subdivided into
models
TOLL FREE
CONTACT
WEB
877 679-4484 [email protected] www.giviusa.com
THE ITALIAN SIGN OF MOTODESIGN
1
COMPANY
THE COMPANY
The Company GIVI was conceived in 1978 by an intuition of Giuseppe Visenzi, a talented rider during the sixties
in several World Championship categories, and very soon became a leading company in the sector of motorcycle
accessories.
The success of its products crossed the national boundaries in a very short time thanks to the passion and to the
enterprising ability of its founder, who was assisted with great care and the determination by a work team that has always
been able to think of and realise new products. Particularly decisive is the constant research carried out with the aim of
developing new materials and the use of new production technologies.
The result is now a range of accessories that are not only accessories, but proper complement for motorcycles, efficient,
technologically advanced and with an always new and winning design.
GIVI, whose production facilities and head quarters are located in Flero, in the industrial heartland of Brescia, is now able
to offer its products in more than 40 Countries, with direct branches in Austria, France, Germany, UK, Spain, Malaysia
and in the U.S.A.
This widespread diffusion makes possible to satisfy the needs of every motorcyclist everywhere in the world.
GIVI boasts a production site that covers an area of 23.500 mq, with a staff counting more than 100 employees, that
take great care in all production phases, from the research / product planning up to its distribution, and is able to make
use of the most modern technologies available, in order to obtain a production responding to the market requests and
characterised by a high technological content.
2
THE ITALIAN SIGN OF MOTODESIGN
COMPANY
1
2
3
4
1. Head office GIVI, Flero – BS
2. Plastic moulding centre, Flero – BS
3. Factory centre GIVI, Flero – BS
4. Head office GIVI, Flero – BS
THE ITALIAN SIGN OF MOTODESIGN
3
COMPANY
THE COMPANY
From the first case produced in 1982, GIVI is now able to offer a very wide range of accessories, both universal and
specific: from soft luggage to cases, from cockpits for naked bikes to windshields for maxi scooters to the newest
helmets.
All these products come from the passion and from the experience gained in more than 20 years, that has made GIVI
one of the most important and known Companies in the world for this sector.
All GIVI accessories are planned to adapt perfectly to each kind of motorcycle thanks to the innovative and modern fitting
systems.
The “specific” solutions are continuously updated to offer to the motorcyclist specific fitting Kits for his motorcycle.
Behind every GIVI motorcycle accessory there is great planning, proved experience, high technological knowledge and
accurate design study.
4
THE ITALIAN SIGN OF MOTODESIGN
COMPANY
1
2
3
4
1 / 2 / 3. Working phases
4. GIVI USA - North Carolina
THE ITALIAN SIGN OF MOTODESIGN
5
COMPANY
MONOKEY® FITTING KIT
MONOKEY® is the historical patented fitting system by GIVI, whose main characteristic
consists of the possibility to operate with only one key both the opening of the case top and
the detachment of the case from the fitting plate.
The extreme practicality and ease of use is only one of the characteristics that have made this
fitting system one of the most utilised in the world.
Thanks to this system, all the cases and plates of the MONOKEY® range combine the best
characteristics of mechanical resistance and rigidity of the fitting, with features using compact
and light components.
The uniform distribution of the load on the plate surface is guaranteed by the three fitting
points, which are placed in such a way to obtain the widest possible contact surface, while the
damping of oscillating and vibration between the bottom shell and the plate are assured by
four spacers made of elasticised polymer, which is particularly resistant to extreme weather
and temperature variation.
Thanks to these solutions a high level of reliability of the fitting is guaranteed even under the
heaviest stresses and strains over the years.
MONOLOCK® FITTING KIT
n order to offer a wider range of applications and uses, GIVI introduced the MONOLOCK®
fitting system.
Following the same philosophy that defines the MONOKEY® fitting system, this solution has
been conceived for lighter vehicles, such as scooters and maxi-scooters, used mainly for
short/mid range commuter transport requirements.
Even with limitations of maximum load, this system of fitting combines performances
comparable to those of the MONOKEY® system with components boasting lighter and far
smaller dimensional restrictions.
Because of its natural compatibility with the different kind of vehicles and its ease of use, it
is, among other aspects, appreciated by the most important brands of motorcycle producers.
Many of these manufacturers have been utilising this system for their ranges of original
accessories for a long time.
As well as for MONOKEY®, the opening of the case top shell and the detachment of the case
from the plate are operated with one key only.
MONOKEY® SIDE FITTING KIT
Introduced on the market in 2006, the Monokey® Side attaches onto the side of the abovementioned two fitting systems, and thereby introducing different fitting solutions for the
motorcyclist.
Projected and patented by the R&D Department of GIVI, the Monokey® Side represents an
interesting evolution of the classic system constituted by the “fitment Kit plus the side-bag”.
The new solution introduces new advanced technical features and some other points of
interest.
The innovative aspects of the new fitting Kit Monokey® Side can be summarised as follows:
Reduction of the overall side encumbrance by inclining the support and use of a new profile
for the bottom-shell of the V35 case, thus closely following the lines of the fairing of the
motorcycle and therefore considerably improving the aerodynamic aspect. Monokey® Side
won’t change the motorcyclist’s habits and will continue to offer ease of use, as the V35 case
is still able to be opened/closed and attached/detached with one key + push button.
6
THE ITALIAN SIGN OF MOTODESIGN
COMPANY
TANKLOCK AND EASYLOCK SYSTEM
The GIVI range expands with the introduction of two new patented design systems:
TANKLOCK (for tank bags) and EASYLOCK (for side bags). The two new product families
share an innovative quick release system, specific for soft luggage, that is the ultimate
synthesis of GIVI R&D department 30 years of advanced design and innovation.
The two new product families give the opportunity to fit soft luggage in a simple yet secure
way, without interfering with the aesthetics of the motorcycle.
The two systems, thanks to their design and lightness, are ideal to fit a range of small and
medium size soft bags that can still carry reasonable loads.
The minimal design of TANKLOCK and EASYLOCK provide a personalized functionality, and
it can also be equipped with a safety lock.
WATERTIGHTNESS
A very important feature for a motorcycle case which is clear to all motorcyclists. We are
speaking of watertightness. In order to obtain it, a high rigidity of the structural profiles of both
the lid and the bottom shell and a perfect combination of these are essential.
These should not only fit in the most natural way, but also maintain their form in the time and
in the most diverse and severe conditions: the larger the dimensions of the case are, the more
difficult this is to achieve.
The study of the materials and of the tolerances of the different components is therefore
imperative in order to limit to the highest degree the expansion that unavoidably occurs with
temperature variations and atmospheric pressure changes (such as exposure to sunlight in
summer or to rigorous climate and bad weather).
The care in assembling, that is done without the drilling of any holes in the external surfaces
of the case, and the seals placed in the recess designed specifically in the top shell, are of
paramount importance in the general watertightness of the case, above all when it is used
as a side pannier.
POWER PROFILE
For a long time GIVI has been applying the technology called “gas injection” for its production:
during the injection of the plastic material in the mould, by means of special nozzles, nitrogen
is injected so that a pressurised cavity is created, which runs along the whole profile of both
the bottom and the top shell.
In this way a high structural rigidity is obtained which certainly contributes to reaching the
standards of sturdiness, resistance and watertightness, thus also reducing the global weight,
since the thickness of the case supporting structure has been reduced.
THE ITALIAN SIGN OF MOTODESIGN
7
COMPANY
PAINTING PROCESS
An innovation launched by GIVI on a broad scale some years ago, having a case with colour
matched painted top shell is now an unavoidable choice for the more discerning motorcyslist
and scooter rider.
From an industrial point of view, few production processes require such attention in order
to ensure constant quality: GIVI obtains this using the same criteria applied in the painting
procedures within the automotive industry and also achieves it thanks to highly automated
painting plants.
Each colour is carefully sampled and afterwards produced by placing a primer layer, then
more layers of coloured paint, and lastly a transparent layer, essential to give brilliance and
brightness to the external surface.
In order to preserve the integrity of the external surface, no less important are a careful
assembling, meticulous control of the finished product and an adequately protective
packing.
THE IMPORTANCE OF DETAILS
From the external lines, expressly studied in the wind tunnel to reduce their aerodynamic
impact, to the presence of the reflectors and other small details that characterise the design,
to the specific colours for a very high number of motorcycle models on the market, all this
contributes to make the case an element that perfectly combines with the aesthetics of the
vehicle to be equipped.
Automatic lock systems which can be operated with one hand only, inner document holders,
inner anti slip base and internal elastic belts for stabilizing the load, absence of screws or
inner protrusions that could damage the content and the possibility to mount passenger back
rests and small luggage carriers are some of the details that make the difference in the daily
use of the case.
GIVI WORLDWIDE COVERAGE
We brought our vast experience and passion beyond the Italian boundaries.
Now we distribute our products in some markets with direct branches: in France, UK, Spain,
Germany, Austria, Brazil, in the USA and in Malaysia.
Furthermore we are present in over 40 Countries in Europe, Asia, North & South America,
Australia and New Zealand through an importer network.
This organisation, besides representing our brand in a significant way, ensures the availability
of spare parts and technical assistance for every user of GIVI products throughout the
world.
8
THE ITALIAN SIGN OF MOTODESIGN
COMPANY
WARRANTY
GIVI products are well known and appreciated among motorcyclists for their outstanding
reliability and durability.
The quality of the materials used and the meticulous construction methods in all production
phases are added to the 24-month warranty that GIVI offers for all of its products.
STAFF
The staff, highly qualified and competent, are constant researching to find innovative solutions
which allow the continuous developing of the products.
The vital functions of the company are research and development, production and
marketing.
THE ITALIAN SIGN OF MOTODESIGN
9
HARD BAGS
MONOKEY® SYSTEM
The GIVI Monokey® range of cases represents the “state of art” for what concerns the transport of luggage on
motorcycles.
It consists of top cases and side cases boasting advanced technical solutions and considerable loading capacity able
to satisfy the needs of the most advanced motorcyclists.
All the models of the Monokey® range, from the “extra large” top case E52 Maxia to the compact side cases E21, are
characterised by the easy and revolutionary system of connection between the bottom of the case and the plate that
enables the opening and the detachment with one key.
MONOLOCK® SYSTEM
The widespread diffusion of scooters has brought GIVI to design top cases and specific fitting Kits for the users of
this important market segment. We are speaking of the Monolock® cases, which boast less capacity compared to the
Monokey® cases, but with the same technical and aesthetic characteristics in accordance with the GIVI standards.
These cases have the proven automatic opening/detaching system: the top push button enables the opening of the
case, while the lower push button detaches it from the plate.
MONOKEY® SIDE SYSTEM
The GIVI Monokey® Side range has been introduced in 2006 with the introduction of the new V35 side-case.
The Monokey® Side is the natural evolution of the tested Monokey® system, which allows the opening and detaching
of the case from the fixing plate by means of one sole key.
The innovative system consists of the use of two new fitting clamps positioned so as to obtain a considerable increase
in safety, resulting in higher stability of the cases on the motorcycle.
10
THE ITALIAN SIGN OF MOTODESIGN
HARD BAGS
THE ITALIAN SIGN OF MOTODESIGN
11
V35
info
VOLUME
22 lb
34 lt
HARD BAGS
* V35N
* V35NT
V35A900
V35_ _ _
C35N
C35_ _ _
T443
*
SIZES
15.5”
MAX. LOAD
CAPACITY
TECHNOLOGY
.4”
20.7”
12
Pair of matte black side cases
with matte black trim panel
Pair of matte black side cases
with matte black trim panel Monochromatic with smoked
lenses
Pair of matte black side cases
with matte silver painted trim
panel
Pair of matte black side cases
with painted trim panel
matte black cover
Pair of painted trim panel
(standard colors)
Pair of saddlebags for V35
cases
$
545,00
$
545,00
$
588,00
$
610,00
$
60,00
$
105,00
$
79,00
Attention: this case can only be
mounted with the tubular sidecase hardware PLX or PLXR
V35 TECH
optional
standard colours
C35_ _ _
T443
TRK33N / TRK46N / TRK52N TREKKER
info
52 lt
MAX. LOAD
VOLUME
22 lb
46 lt
MAX. LOAD
VOLUME
22 lb
33 lt
* TRK52N
* TRK33N
TRK33PACK2
TRK52N
* TRK46N
TRK46PACK2
TRKPACK3
standard colours
E118
E120
optional
E120B
E125
T484
E118
12
E120
E125
T484
*
THE ITALIAN SIGN OF MOTODESIGN
18.1”
22 lb
SIZES
CAPACITY
TECHNOLOGY
CAPACITY
TECHNOLOGY
.4”
12 23.6”
SIZES
16.2”
VOLUME
2”
20.7”
12.
SIZES
16.2”
MAX. LOAD
TECHNOLOGY
”
20.7”
9.5
52 Liter top or side case with aluminium
finish - clam shell and top opening
33 Liter top or side case with aluminium
finish - clam shell and top opening
Set of two 33 Liter top or side case
packaged together - keyed alike
46 Liter top or side case with aluminium
finish - clam shell and top opening
Set of two 46 Liter top or side case
packaged together - keyed alike
3 cases - Two TRK33N and
onde TRK46N packaged
together - cases keyed alike
Polyurethane Back Pad (black)
Metal top case rack - does not
allow for top opening
Metal top case rack - allows for
both clam shell and top opening
Four rings kit for T10N elastic
net anchor. The rings must
be anchored to the case by
making four holes of ø10mm
Removable internal liner bag
for Trekker cases - each
The top case cannot be fitted onto
plates on which the contact for
stop lights kit has been mounted
$
TBD
$
320,00
$
640,00
$
335,00
$
670,00
$
925,00
$
55,00
$
90,00
$
80,00
$
12,00
$
75,00
E55 MAXIA 3
info
22 lb
55 lt
SIZES
CAPACITY
.9”
18 23.2”
E55N
E55 MAXIA TECH
standard colours
optional
E111
E112
E113S
55 Liter top case, matte black
55 Liter top case, matte black E55NT
Monochromatic w/ smoked lenses
E55_ _ _ 55 Liter top case w/ painted lid panel
55 Liter top case, matte black w/
E55NLUXEB preinstalled E112 stop light kit &
E114 lid/base liner
55 Liter top case, matte black w/
E55NLUX preinstalled E113S remote entry &
E112 stop light kit
55 Liter top case, matte black w/ preinstalled
E55NTLUX E113S remote entry & E112 stop light kit
- Monochromatic w/ smoked lenses
Painted lid panel for any E55
C55_ _ _
series case
Specific backrest for E55 cases
- Covered in black and silver
E111
simulated leather
Specific stop light for E55 cases E112
Red LED
E113S
Specific remote control entry for E55 cases
E114
Specific inner lid/base liner for E55 cases
E96
Metal Top Case rack (black)
E96G
Metal Top Case rack (silver)
T468
Removable internal liner bag
E114
E52 MAXIA
E96
$
340,00
$
340,00
$
415,00
$
399,00
$
465,00
$
465,00
$
70,00
$
75,00
$
61,00
$
$
$
$
$
99,00
39,00
75,00
75,00
33,00
T468
info
MAX. LOAD
VOLUME
22 lb
52 lt
E52N
E52NF
E52_ _ _
E95S
E96
E96G
E97
E98
T468
SIZES
12.4”
C55_ _ _
TECHNOLOGY
HARD BAGS
VOLUME
12.6”
MAX. LOAD
CAPACITY
TECHNOLOGY
.6”
23.3”
17
52 Liter top case, matte black
52 Liter top case, matte black
w/preinstalled E97 stop light
52 Liter top case, w/ painted lid
Specific backrest for E52
cases - Covered in black
simulated leather
Metal Top Case rack (black)
Metal Top Case rack (silver)
Specific stop light for E52
cases
Specific Inner base liner for
E52 cases
Removable internal liner bag
$
310,00
$
340,00
$
382,00
$
74,00
$
$
75,00
75,00
$
61,00
$
64,00
$
33,00
standard colours
optional
E95S
E96
E97
E98
T468
THE ITALIAN SIGN OF MOTODESIGN
13
V46
info
VOLUME
22 lb
46 lt
HARD BAGS
V46N
V46NT
V46NF
V46_ _ _
C46N
C46_ _ _
E95S
V46 TECH
E105S
E106
standard colours
E107
T468
SIZES
12.2”
MAX. LOAD
CAPACITY
TECHNOLOGY
.3”
17 21.8”
46 Liter top case, matte black
46 Liter top case, matte black
- Monochromatic w/ smoked &
clear lenses
46 Liter top case, matte black
w/ preinstalled E105 stop light
46 Liter top case w/ painted
lid panel
Matte black lid panel for V46
cases
Painted lid panel for V46 cases
Specific backrest for V46
cases - Covered in black
simulated leather
Specific stop light for V46 V46NT / Batteries not included
Interior stop light for V46 cases
- Red LED
Metal Top Case rack (black)
Removable internal liner bag
$
273,00
$
273,00
$
315,00
$
328,00
$
29,00
$
70,00
$
74,00
$
57,00
$
25,00
$
$
75,00
33,00
optional
C46_ _ _
E95S
E41 KEYLESS
E105S
E106
E107
T468
info
MAX. LOAD
VOLUME
22 lb
41 lt
SIZES
17”
C46N
CAPACITY
.4”
11 22.6”
Pair of KEYLESS 41 liter side
cases, matte black w/ matt
silver lids
Pair of KEYLESS 41 liter side
* E41NN
cases, matte black w/ matt
black lids
Pair of KEYLESS 41 liter side
* E41G730 cases, matte black w/ gloss
silver lids
E410NN
Pair of matte black lids
E410_ _ _ Pair of painted lids
T468
Removable internal liner bag
* E41N
*
Item comes two to a box
optional
standard colours
E410_ _ _
14
T468
THE ITALIAN SIGN OF MOTODESIGN
TECHNOLOGY
$
541,00
$
537,00
$
599,00
$
$
$
186,00
200,00
33,00
E460
info
22 lb
46 lt
* E460N
E460_ _ _ E79
E81
E92
T468
SIZES
CAPACITY
TECHNOLOGY
.6”
22.3”
16
46 ltr. Topcase, black
46 ltr. Painted Topcase
Polyurethane backrest (black)
Metal rack (black)
Stop light for Monokey® case
E460
Removable internal liner bag
$
$
$
$
232,00
304,00
48,00
75,00
$
57,00
$
33,00
$
217,00
$
$
75,00
33,00
HARD BAGS
VOLUME
12.3”
MAX. LOAD
optional
standard colours
E81
E360
E92
T468
info
MAX. LOAD
VOLUME
22 lb
40 lt
E360N
E81
T468
SIZES
16.6”
E79
”
11
TECHNOLOGY
22.3”
40 ltr. MONOKEY Topcase/
Sidecase, black
Metal rack (black)
Removable internal liner bag
optional
standard colours
E81
T468
THE ITALIAN SIGN OF MOTODESIGN
15
info
MAX. LOAD
VOLUME
22 lb
33 lt
SIZES
12.2”
B33 MONOKEY
CAPACITY
.5”
16 17.7”
HARD BAGS
33 Liter Monokey® top case
(black)
Top case black embossed luxe
B33NMKLUX version complete with specific
remote control (E129)
Painted Cover (standard
C340_ _ _
colors)
C340_ _ _ Painted Cover (specific colors)
Paintable cover in smooth
C340NL
ABS
Specific remote control
E129
for B33
Polyurethane backrest
E130
(black)
* B33NMK
*
TECHNOLOGY
$
229,00
$
339,00
$
40,00
$
50,00
$
22,00
$
95,00
$
45,00
$
188,00
$
281,00
Item sold in packs of 2 pieces
each, the price is to be intended
as a unit price
optional
standard colours
E129
E130
E21 CRUISER
info
MAX. LOAD
VOLUME
11 lb
21 lt
SIZES
13.7”
C340_ _ _
TECHNOLOGY
7”
16.7”
7.
Pair of CRUISER side cases,
ltr. 21 , matte black
Pair of CRUISER side cases,
* E21_ _ _
ltr. 21, painted
* E21N
*
Item comes two to a box
standard colours
16
THE ITALIAN SIGN OF MOTODESIGN
E36/E45
info
36 lt
MAX. LOAD
VOLUME
22 lb
45 lt
E36NJ
E45NJ
E68
T468
TECHNOLOGY
.6”
10 22”
SIZES
CAPACITY
TECHNOLOGY
HARD BAGS
22 lb
SIZES
16.1”
VOLUME
16.3”
MAX. LOAD
1”
8
11.
22”
36 ltr. MONOKEY Topcase/
Sidecase (economy version),
black only
45 ltr. MONOKEY Topcase/
Sidecase (economy version),
black only
Polyurethane backrest (black)
Internal bag for Monolock and
Monokey cases
$
153,00
$
156,00
$
49,00
$
33,00
optional
standard colours
T468
B47 BLADE
info
B47 BLADE TECH
optional
MAX. LOAD
VOLUME
6,6 lb
47 lt
SIZES
13.3”
E68
CAPACITY
.5”
17 22.4”
47 Liter MONOLOCK® top
* B47NML case (black), universal fitting
kit included
Top case black embossed luxe
version complete with specific
B47NMLLUX
remote control (E132) and
double stop light kit (E126)
47 Liter top case matte black
- Monochromatic w/ smoked
* B47NTML
lenses, universal fitting kit
included
Top case black embossed,
with smoked reflectors, luxe
B47NTMLLUX version complete with specific
remote control (E132) and
double stop light kit (E126)
Cover painted (standard
C47_ _ _
colors)
Stop light for top-case
E126
Monolock® B47
Specific remote control for B47
E132
BLADE
E131
Polyurethane backrest (black)
T468
Removable internal liner bag
*
TECHNOLOGY
Items comes two to a box, the
above price is per top box
$
299,00
$
429,00
$
299,00
$
429,00
$
75,00
$
79,00
$
99,00
$
$
50,00
33,00
standard colours
C47_ _ _
E126
E132
T468
THE ITALIAN SIGN OF MOTODESIGN
17
E470 SIMPLY III
info
VOLUME
6,6 lb
47 lt
SIZES
12.7”
MAX. LOAD
CAPACITY
TECHNOLOGY
.7”
21.8”
16
HARD BAGS
47 ltr. MONOLOCK Topcase
SIMPLY (matte black),
universal fitting Kit included
47 ltr. MONOLOCK Topcase
E470_ _ _ SIMPLY (painted), universal
fitting kit included
Cover painted (standard
C470_ _ _
colors)
Stop light for E450/E470
E94
SIMPLY
E110
Back-pad
T468
Removable internal liner bag
E470N
$
221,00
$
274,00
$
75,00
$
51,00
$
$
60,00
33,00
optional
standard colours
E94
E110
T468
E370
info
MAX. LOAD
VOLUME
6,6 lb
39 lt
SIZES
CAPACITY
.3”
16 18.8”
39 ltr. MONOLOCK Topcase
(matte black), universal fitting
kit included
39 ltr. MONOLOCK topcase
(black embossed) with smoked
E370NT
reflectors, universal fitting kit
included
39 ltr. MONOLOCK Topcase
E370_ _ _ (painted), universal fitting kit
included
Painted Cover (standard
C370_ _ _
colors)
E108
Stop light for E370
E109
Back-pad
E370N
E370 TECH
optional
standard colours
C370_ _ _
18
E108
E109
THE ITALIAN SIGN OF MOTODESIGN
TECHNOLOGY
12.7”
C470_ _ _
$
169,00
$
169,00
$
211,00
$
65,00
$
$
60,00
60,00
info
VOLUME
6,6 lb
45 lt
SIZES
CAPACITY
TECHNOLOGY
.7”
22”
16
45 ltr. MONOLOCK Topcase
SIMPLY (matt black), universal
fitting kit included
45 ltr. MONOLOCK Topcase
E450_ _ _
SIMPLY (painted)
E84
Polyurethane backrest (black)
E94
Stop light
T468
Removable internal liner bag
E450N
$
184,00
$
258,00
$
$
$
41,00
51,00
33,00
HARD BAGS
MAX. LOAD
12.7”
E450 SIMPLY II
optional
standard colours
E94
T468
E340 VISION
info
MAX. LOAD
VOLUME
6,6 lb
34 lt
E340N
E340A900
E340G730
C340_ _ _
C340_ _ _
C340NL
E811
SIZES
12”
E84
CAPACITY
TECHNOLOGY
.3”
19.1”
16
34 ltr. MONOLOCK® Topcase
(matte black) universal fitting
kit included
34 ltr. MONOLOCK® Topcase
(painted) universal fitting kit
included
34 ltr. MONOLOCK® Topcase
(painted) universal fitting kit
included
Painted Cover (standard
colors)
Painted Cover (specific
colors)
Paintable cover in smooth ABS
Polyurethane backrest (black)
$
150,00
$
165,00
$
183,00
$
40,00
$
50,00
$
$
22,00
51,00
optional
standard colours
C340_ _ _
E811
THE ITALIAN SIGN OF MOTODESIGN
19
info
MAX. LOAD
VOLUME
22 lb
33 lt
SIZES
12.2”
B33 MONOLOCK
CAPACITY
.5”
16 17.7”
HARD BAGS
33 ltr. MONOLOCK® topcase
* B33NML (black), universal fitting kit
included
Topcase black embossed luxe
B33NMLLUX version complete with specific
remote control (E129)
Painted Cover (standard
C340_ _ _
colors)
Painted Cover (specific
C340_ _ _
colors)
C340NL
Paintable cover in smooth ABS
E129
Specific remote control for B33
E130
Polyurethane backrest (black)
*
TECHNOLOGY
Items comes two to a box, the
above price is per top box
$
189,00
$
299,00
$
40,00
$
50,00
$
$
$
22,00
95,00
45,00
optional
standard colours
E129
E130
E260 MICRO II
info
MAX. LOAD
VOLUME
6,6 lb
26 lt
SIZES
12.1”
C340_ _ _
CAPACITY
.3”
15.2”
15
26 ltr. MONOLOCK® Topcase
MICRO II (matte black),
universal fitting kit included
26 ltr. MONOLOCK® Topcase
E260_ _ _ MICRO II (painted), universal
fitting kit included
E99
Stop light
E102
Polyurethane backrest (black)
E260N
optional
standard colours
E99
20
E102
THE ITALIAN SIGN OF MOTODESIGN
TECHNOLOGY
$
129,00
$
214,00
$
$
52,00
51,00
info
VOLUME
6,6 lb
30 lt
SIZES
CAPACITY
TECHNOLOGY
.7”
16.1”
15
30 ltr. MONOLOCK Topcase
TOUR (black), universal fitting
kit included
30 ltr. MONOLOCK Topcase
E300_ _ _ TOUR (painted), universal
fitting kit included
Painted Cover (standard
C340_ _ _
colors)
Painted Cover (specific
C340_ _ _
colors)
C340NL
Paintable cover in smooth ABS
E103
Back-pad
E300N
$
120,00
$
160,00
$
40,00
$
50,00
$
$
22,00
51,00
HARD BAGS
MAX. LOAD
11.8”
E300
optional
standard colours
E103
E300B
info
MAX. LOAD
VOLUME
6,6 lb
30 lt
SIZES
11.8”
C340_ _ _
CAPACITY
TECHNOLOGY
.7”
16.1”
15
Monolock® top-case with white
painted cover, complete with
plate and universal kit
Painted Cover (standard
C340_ _ _
colors)
Painted Cover (specific
C340_ _ _
colors)
C340NL
Paintable cover in smooth ABS
E103
Back-pad
E300B
$
120,00
$
40,00
$
50,00
$
$
22,00
51,00
optional
standard colours
C340_ _ _
E103
THE ITALIAN SIGN OF MOTODESIGN
21
info
MAX. LOAD
VOLUME
6,6 lb
30 lt
HARD BAGS
E30N
E103
E104
SIZES
11.8”
E30 TOUR
”
15.7”
30 ltr. MONOLOCK® Topcase
TOUR (black), universal fitting $
kit included
Polyurethane backrest (black) $
Stop light
$
standard colours
22
E104
THE ITALIAN SIGN OF MOTODESIGN
TECHNOLOGY
16
optional
E103
CAPACITY
100,00
51,00
53,00
FITTING SOLUTION
FITTING SOLUTIONS
GIVI has developed the most comprehensive range of specific fitting Kits available on the market. A choice of accessories
able to satisfy the different travel needs of keen motorcyclists in a professional way. For the mounting of a top case we
offer PLATES, SPECIAL RACKS and MONORACKS, for the mounting of two side cases are available PL, PLA/PLB
holders and WINGRACK chassis with the possibility of mounting also the top case. The WINGRACK chassis is available
also in the universal version (to be combined with specific fitting Kits) thus obtaining the maximum loading capacity
on every motorcycle. The constant GIVI research and development offer the perfect adaptable mounting solutions for
multiple makes and model of motorcycles, this is one of the main reason motorcyclists everywhere in the world choose
GIVI.
THE ITALIAN SIGN OF MOTODESIGN
23
In order to fix a case or top-case on your motorcycle/scooter, GIVI offers lots of possibilities depending on the model of
motorcycle you own. Herewith following you will find all the fitting possibilities; you can look at the table “Guide to the
availability for motorcycle models” on page 69 to see which is the best solution in your case.
MONOKEY® CASES RANGE
FITTING SOLUTION
E55 MAXIA 3
E55 MAXIA TECH
TRK _ _
B33NMK
E21 CRUISER
E36 / E45
E52 MAXIA
V46
V46NT TECH
E41 KEYLESS
Mounting possibilities 1 MONOKEY® TOP-CASE
MONORACK (F/FL TYPE)
+
M3
M35
=
...................+................... _ _ _ F
...................+................... _ _ _ FL
MONORACK (FZ TYPE)
+
=
M5 / M11 .....................+..................... _ _ _ FZ
SPECIAL RACK (SR TYPE)
SR _ _ _
24
- with the plate you find in the box
- with E250 plate
THE ITALIAN SIGN OF MOTODESIGN
E460
E360
SPECIAL RACK
IN ALUMINIUM (SR TYPE)
FITTING SOLUTION
SR _ _ _
SPECIFIC PLATE (E TYPE)
E___
with the plate you find in the box
Mounting possibilities 2 MONOKEY® SIDE-CASES
Monokey® cases suggested by GIVI for the lateral mounting: TRK46N - TRK33N - E41 - E360 - E21 - E36 - E45
SPECIFIC TUBULAR SIDE
CASE HOLDER (PL / PLR)
PL _ _ _ / PLR _ _ _
THE ITALIAN SIGN OF MOTODESIGN
25
WINGRACK (N150/N151 TYPE)
+
N150
=
N151
FITTING SOLUTION
Wingrack N150 / N151 .........+..........
Y___
Mounting possibilities 3 MONOKEY® CASES
or 2 MONOKEY® CASES + 1 MONOLOCK® TOP-CASE
Monokey® cases suggested by GIVI for the lateral mounting: TRK46N - TRK33N - E41 - E360 - E21 - E36 - E45
MONORACK (F/FZ/FL TYPE) + SPECIFIC TUBOLAR SIDE CASE HOLDER (PL)
=
+
_ _ _F / _ _ _FZ
With FZ:
Wth F:
............+............
PL _ _ _ / PLR _ _ _
+ M5 / M11 plate for the mounting of Monokey® top-case / + M5M plate for the mounting of the Monolock® top-case
+ M2 / M3 for the mounting of Monokey® top-case / + MM plate for the mounting of Monolock® top-case
WINGRACK SYSTEM IN ALLUMINIUM (N150 / N151 TYPE)
+
N140
=
N141
Wingrack N140 / N141 .......+.......
26
Y___
THE ITALIAN SIGN OF MOTODESIGN
MONOLOCK® CASES RANGE
B47 / B47 TECH
E470 SIMPLY III
E450 SIMPLY II
E370 / E370 TECH
B33
E340
E30 TOUR
E300
E300B
E260 MICRO
FITTING SOLUTION
Mounting possibilities 1 MONOLOCK® TOP-CASE
MONORACK (F TYPE)
+
MM
=
.....................+..................... _ _ _ F
MONORACK (FZ TYPE)
+
M5M
=
...................+................... _ _ _ FZ
SPECIFIC CASE CARRIER (SR TYPE)
SR _ _ _
......+......
SR _ _ _ M
with the Monolock® plate you find in the box
with the plate you find in the box
SPECIFIC PLATE (E TYPE)
......+......
E___
E _ _ _ M ......+......
with the Monolock® plate you find in the box
with the plate you find in the box
THE ITALIAN SIGN OF MOTODESIGN
27
MONOKEY® SIDE CASES RANGE
V35 / V35 TECH
Mounting possibilities 2 MONOKEY® SIDE CASES or
2 MONOKEY® SIDE CASES + 1 MONOKEY® CASE OR 1 MONOLOCK® CASE
FITTING SOLUTION
TUBULAR
SIDE-CASE HOLDERS
(PLX)
TUBULAR
SIDE-CASE HOLDERS
EASY FIT (PLXR)
PLX _ _ _ / PLXR _ _ _
MONORACK ARMS (F / FZ TYPE) + TUBULAR SIDE-CASE HOLDER (PLX / PLXR TYPE)
=
+
_ _ _F / _ _ _FZ
With FZ:
With F:
......+......
PLX _ _ _ / PLXR _ _ _
+ M5 / M11 plate for the mounting of Monokey® top-case / + M5M plate for the mounting of Monolock® top-case
+ M2 / M3 for the mounting of Monokey® top-case / + MM plate for the mounting of Monolock® top-case
MOUNTING POSSIBILITIES with UNIVERSAL SYSTEMS
If there has not been a specific solution for the mounting of GIVI cases and top-cases for your motorcycle, you can also
check the possibility of using one of the following universal fitting systems:
Mounting possibilities 1 MONOKEY® TOP-CASE
UNIVERSAL MONORACK (1000F) / UNIVERSAL PLATE (E250)
+
M3
28
..................+..................
1000F
THE ITALIAN SIGN OF MOTODESIGN
E250
Mounting possibilities 3 MONOKEY® CASES
UNIVERSAL FITTING KIT (Y127)
FITTING SOLUTION
+
N140
N141
Wingrack N140 / N141 .......+.......
Y127
.......+.......
Y100 Universal Wingrack linking bridge kit
(we suggest to buy this item in order to improve
the stability and the security of the system)
Mounting possibilities 1 MONOLOCK® CASE
UNIVERSAL MONORACK (1000F) / UNIVERSAL PLATE in MONOLOCK® TOP-CASES BOX
+
MM
..................+..................
1000F
Universal plate in Monolock®
top-cases box
price _
M3
$
62.00
N151
$
115.00
Y127
$
93.00
M35
$
69.00
N140
$
222.00
Y100
$
44.00
M5
$
62.00
N141
$
180.00
M11
$
78.00
MM
$
62.00
M5M
$
62.00
1000F
$
107.00
E250
$
70.00
N150
$
148.00
For the specific motorcycle items prices (_ _ _F / _ _ _FL / _ _ _FZ / SR_ _ _ / SR_ _ _M / PL_ _ _ / PLR_ _ _ / PLX_ _ _ /
PLXR_ _ _ / E_ _ _ / E_ _ _) consult the “Guide to availability for motorcycle models” from page 69.
THE ITALIAN SIGN OF MOTODESIGN
29
SOFT BAGS
SOFT BAGS
Besides hard luggage, GIVI also produces a wide range of soft luggage.
Like these practical tank bags made of polyester and textile (available in different sizes), the saddle bags, the tail bags,
the rucksacks, etc.
Several small but extremely significant details underline the great attention to detail that GIVI gives to these items: for
instance the transparent pocket, that enables the use of a map while riding, or the base of the bag made of a scratch
and slip resistant material, that protects the integrity of your tanks paintwork. And last but not least the rain cover
provided, that protects your luggage in case of sudden bad weather, the belts to guarantee a more secure fitting and
the shoulder straps which transform the bags into a rucksack to make easier transportation when off the bike.
ICONS
dimensioni
dimensions
Abmessungen
dimensions
dimensiónes
tracolla
shoulder strap
Tragegurt
bandoulière
bandolera
scomponibile
modular
teilbar
modulabile
modular
volume
capacity
Kapazität
volume
volumen
cinghie elastiche
elastic straps
Elastikgurt
sangles élastiques
correas elásticas
estensibili
expandable
erweiterbar
extensible
extensible
parti staccabili
detachable accessories
abnehmbare Teile
parties détachables
Partes Divisibles
base rinforzata
resistente al calore
heat resistant base
hitzebeständiges Unterteil
fond résistant à la chaleur
fondo reforzado
resistente al calor
magneti
magnets
Magnete
aimants
Con imanes
TECHNOLOGY
DETACHABLE ACCESSORIES
Monokey® / Monolock®
Monokey® / Monolock®
Monokey® / Monolock®
Monokey® / Monolock®
Monokey® / Monolock®
trasformabile in zainetto
it can be trasformed
into a rucksack
in einen Rucksack
umwandelbar
transformable en sac a dos
transformable en mochila
cinghie a velcro
universal adjustable
velcro straps
Klettbänder
sangles velcro
correas de velcro
busta impermeabile
antipioggia
raincover
Regenhaube
housse imperméable
bolsa impermeable
TFS
INNER POCKET
Tank Fitting System
Tank Fitting System
Tank Fitting System
Tank Fitting System
Tank Fitting System
Scomparti interni
inner pocket
interne Fächer
compartiments intérieurs
Compartimento interno
cinghia di sicurezza
additional fastening belt
Sicherheitsgurt
sangle de sécurité
correa de seguridad
WITH PLATE
REMOVABLE MAGNETS
WATERPROOF ZIP
REINFORCED PARTS
STRAP EMERGENCY
HELMET BAG
porta casco
helmet bag
Helmtasche
porte casque
Porta-casco
impugnatura ergonomica
ergonomic grip
ergonomischer Handgriff
poignée ergonomique
Asa ergonómica
bande riflettenti
reflective parts
Reflektierende Bänder
Bandes reflectives
Bandas reflectantes
tasca per pc
pc pocket
Fach für Laptop
poche pour pc
Compartimento para PC
Predisposto per lucchetto
di sicurezza
Set to safety lock
Antidiebstahl vorgesehen
Predisposée pour le
cadenas de sécurité
preparada para colocar
candado de seguridad
cerniere impermeabili
waterproof zip
wasserdichte
Reißverschlüsse
fermetures zip
imperméables
Cremallera termosellada
Porta GPS integrato
GPS holder integrated
GPS Halterung integriert
Support pour GPS intégré
porta GPS integrado
portacartina
map holder
Kartenfach
portecarte
porta mapas
parti rinforzate
reinforced parts
verstärkte Teile
parties renforcées
Partes reforzadas
Sacca interna
antiacqua asportabile
Easy-carry dry pak inside
Innentasche wasserdicht
abnehmbar
Sac interne étanche
démontable
Bolsa interior extraíble
impermeable
Easylock System
Easylock System
Easylock System
Easylock System
Easylock System
con piastra
with plate
mit Platte
avec platine
Con parrilla
Magneti estraibili
Removable magnets
Entfernbare Magnete
aimants amovibles
Imanes extraíbles
ERGONOMIC GRIP
PC POCKET
Tanklock System
Tanklock System
Tanklock System
Tanklock System
Tanklock System
30
cinghia di sicurezza
additional fastening belt
Sicherheitsgurt
sangle de sécurité
correa de seguridad
THE ITALIAN SIGN OF MOTODESIGN
EASY RANGE
NEW
Magnetic tank bag
RAIN COVER
WATERPROOF ZIP
TFS
6.7”>9.4”
11
14.6”
VOLUME
SHOULDER STRAP
SIZES
REINFORCED PARTS
Universal expandable tank
bag
VOLUME
UNIVERSAL
14
11”
17
28 lt
MAP HOLDER
FASTENING BELT
RAIN COVER
EXPANDABLE
6.7”>10.6”
19
26 lt
MAP HOLDER
.8”
SIZES
T494
$ 90,00
.5”
EXPANDABLE
T449
$ 99,00
TRANSFORMABLE
SIZES
11”
T463
”
9.8
”>
7.9
19.7”
HEAT RESISTANT
$ 109,00
VOLUME
28
35 lt
ELASTIC STRAPS
SHOULDER STRAP
RAIN COVER
VELCRO
EXPANDABLE
FASTENING BELT
WATERPROOF ZIP
NEW
SOFT
BAGS
SOFT BAGS
NEW
Pair of saddle bags
SIZES
Pair of large expandable
lateral bags
VOLUME
ELASTIC STRAPS
RAIN COVER
SHOULDER STRAP
SIZES
HEAT RESISTANT
Paire de petites sacoches
latérales, extensibles
VOLUME
EXPANDABLE
1”
>1
7”
18.5”
19
25 lt
VELCRO
ELASTIC STRAPS
RAIN COVER
11.4”
VELCRO
12.5”
EXPANDABLE
1”
>1
7”
20.8”
28
35 lt
T493
$ TBD
SHOULDER STRAP
T451
$ TBD
HEAT RESISTANT
SIZES
18.9”
T492
”
4.7
15.3”
Rucksack
VOLUME
22 lt
EXPANDABLE
$ 58,00
HELMET BAG
NEW
”
.5
>9
”
5.5
16.5”
RAIN COVER
VOLUME
17
24 lt
EXPANDABLE
STRAP EMERGENCY
T455
$ 69,00
SIZES
HELMET BAG
.8”
11
9.8”
MAP HOLDER
Tunnel bag for scooters
VOLUME
18 lt
ELASTIC STRAPS
SHOULDER STRAP
T496
$ 99,00
SIZES
RAIN COVER
12.5”
16.9”
SIZES
Expandable helmet holder
rucksack
12.6”
T495
NEW
.8”
11
9.8”
Tunnel bag for scooter,
with lateral pockets
VOLUME
SHOULDER STRAP
FASTENING BELT
$ 99,00
REINFORCED PARTS
22 lt
RAIN COVER
THE ITALIAN SIGN OF MOTODESIGN
31
SILVER RANGE
NEW
.2”
12
10.6”
VOLUME
14
22 lt
MAP HOLDER
TANKLOCK
SYSTEM
RAIN COVER
T489
SHOULDER STRAP
SIZES
.7”
13
10.6”
Tank bag “TANKLOCK” to match with
$ 139,00
motorcycle specific mounting ring (BF_ _)
VOLUME
14
18 lt
MAP HOLDER
WATERPROOF ZIP
TANKLOCK
SYSTEM
RAIN COVER
T491
SHOULDER STRAP
7.08”
7.8”>11.8”
SIZES
Tank bag “TANKLOCK” to match with
$ 149,00
motorcycle specific mounting ring (BF_ _)
6.3”>7.8”
T480
WATERPROOF ZIP
FASTENING BELT
EXPANDABLE
Tank bag “TANKLOCK” to match with
$ 169,00
motorcycle specific mounting ring (BF_ _)
SIZES
VOLUME
.3”
17 lt
13
10.6”
MAP HOLDER
TANKLOCK
SYSTEM
RAIN COVER
SHOULDER STRAP
WATERPROOF ZIP
SOFT
BAGS
SOFT BAGS
MAP HOLDER
T469
SIZES
RAIN COVER
FASTENING BELT
Little lateral bags
VOLUME
17.7”
EXPANDABLE
RAIN COVER
6.3”>10.2”
32
WATERPROOF ZIP
20
32 lt
”
11
TANKLOCK
SYSTEM
SHOULDER STRAP
SHOULDER STRAP
SIZES
WATERPROOF ZIP
EXPANDABLE
REINFORCED PARTS
VOLUME
”
9.4
13.8”
13
21 lt
TFS
RAIN COVER
$ 120,00
T479
VELCRO
SIZES
WATERPROOF ZIP
Big lateral bags
VOLUME
19.7”
29
39 lt
EXPANDABLE
RAIN COVER
”
11
MAP HOLDER
T478
$ 110,00
EXPANDABLE
SIZES
SHOULDER STRAP
WATERPROOF ZIP
REINFORCED PARTS
Big tank bag convertible in
a rucksack
VOLUME
0
29
350
33
42 lt
REMOVABLE MAGNETS
RAIN COVER
330>420
15
23 lt
Little tank bag convertible
in a rucksack
$ 140,00
T477
VELCRO
SIZES
VOLUME
.8”
11
11.8”
33 lt
18.5”
.8”
11
9.8”
VOLUME
T470
$ 155,00
6.3”>9.8”
7.8”>12.2”
SIZES
Tank bag for enduro motorbikes
with a specific frame
7.9”>11.4”
T483
RAIN COVER
THE ITALIAN SIGN OF MOTODESIGN
MAP HOLDER
WATERPROOF ZIP
$ 160,00
MODULAR
FASTENING BELT
Roll and seat bag
SHOULDER STRAP
REINFORCED PARTS
$ 90,00
WATERPROOF ZIP
VELCRO
INNER POCKET
T454B Leg purse
STRAP EMERGENCY
SIZES
6.7”
4.3”
SIZES
$ 30,00
.5”
5
9.8”
INNER POCKET
T472
$ 40,00
FASTENING BELT
.9”
2
4.3”
Tunnel/seat bag for
scooters
SIZES
VOLUME
”
0.6
1
11.8”
18 lt
PC POCKET
RAIN COVER
8.6”
T453B Waist bag
SHOULDER STRAP
WATERPROOF ZIP
$ 80,00
INNER POCKET
STRAP EMERGENCY
SOFT
BAGS
SOFT BAGS
XSTREAM RANGE
2,5 lt
”
5.9
9”
MAGNETIC
SHOULDER STRAP
WATERPROOF ZIP
SIZES
.7”
13
10.2”
SHOULDER STRAP
SIZES
Rucksack helmet holder
VOLUME
WATERPROOF ZIP
RAIN COVER
15.7”
10.6”
24
32 lt
”
1.8
>1
9”
EXPANDABLE
HELMET BAG
T475
$ 150,00
INNER POCKET
SIZES
7.9”>11.4”
T487
ERGONOMIC GRIP
STRAP EMERGENCY
Seat bag
VOLUME
ELASTIC STRAPS
WATERPROOF ZIP
ERGONOMIC GRIP
REINFORCED PARTS
Big tank bag
VOLUME
”
0.2
1
14.6”
19
27 lt
TFS
RAIN COVER
MAP HOLDER
EXPANDABLE
REINFORCED PARTS
$ 130,00
EXPANDABLE
WATERPROOF ZIP
FASTENING BELT
.2”
12
7.8”
9
12lt
MAGNETIC
REMOVABLE MAGNETS
RAIN COVER
REINFORCED PARTS
TFS
T474
$ 199,00
WATERPROOF ZIP
Tank purse with magnets
VOLUME
SIZES
17 lt
RAIN COVER
T486
$ 145,00
7>9”
VOLUME
T485
$ 57,00
REMOVABLE MAGNETS
SIZES
Little lateral bags
VOLUME
”
0.6
1
17.7”
26
35 lt
SHOULDER STRAP
RAIN COVER
8.7”>11.4”
2.8”
SIZES
Small magnetic tank bag
8.6”
T409
THE ITALIAN SIGN OF MOTODESIGN
EXPANDABLE
$ 195,00
WATERPROOF ZIP
FASTENING BELT
REINFORCED PARTS
33
3D RANGE
SIZES
Thermoformed saddle bag
EASYLOCK
VOLUME
17
8.6”
15 lt
ERGONOMIC GRIP
WATERPROOF ZIP
11.4”
.7”
EASYLOCK
SYSTEM
$ 299,00
INNER POCKET
TPH02
Thermoformed tank bag
TANKLOCK
SIZES
VOLUME
4 lt
5.5”
TPH01
TANKLOCK
SYSTEM
$ 110,00
INNER POCKET
WATERPROOF ZIP
.8”
9
9.4”
RAIN COVER
WATERPROOF RANGE
SOFT
BAGS
SOFT BAGS
NEW
WATERPROOF
$ 99,00
ELASTIC STRAPS
TW02
VOLUME
”
2.6
1
23.6”
40 lt
30 lt
ERGONOMIC GRIP
SHOULDER STRAP
ERGONOMIC GRIP
13.3”
SIZES
Waterproof cylinder for the
seat, carrier 30 lt.
SIZES
VOLUME
WATERPROOF
1
22.8”
SHOULDER STRAP
”
9.4
9.4”
SHOULDER STRAP
34
VOLUME
80 lt
WATERPROOF
$ 149,00
TW05
ELASTIC STRAPS
SIZES
Waterproof leg bag
WATERPROOF
$ 40,00
FASTENING BELT
”
3.1
4.7”
ERGONOMIC GRIP
THE ITALIAN SIGN OF MOTODESIGN
Waterproof rucksack 35 lts $ 109,00
SIZES
VOLUME
.4”
35 lt
9
9.4”
SHOULDER STRAP
NEW
6.3”
23.6”
SIZES
Waterproof bag, 80 lts
TW03
ELASTIC STRAPS
”
3.7
NEW
TW04
$ 69,00
23.6”
Waterproof bag for seat,
carrier 40 lt.
13.7”
TW01
WATERPROOF
ELASTIC STRAPS
CLASSICS RANGE
NEW
45 lt
REINFORCED PARTS
FASTENING BELT
9
17.7”
VELCRO
TRANSFORMABLE
GP101 Saddle roller bag / rack
SIZES
VOLUME
.6”
13 lt
REINFORCED PARTS
FASTENING BELT
MODULAR
7.8”
VOLUME
.8”
18.5”
SIZES
$ 299,00
RAIN COVER
8
14.5”
VELCRO
SHOULDER STRAP
$ 99,00
NEW
GP102 Saddle bag / rack
SIZES
MODULAR
11.8”
GP100 Saddle bag / rack
NEW
RAIN COVER
.4”
11
16.9”
REINFORCED PARTS
VOLUME
VELCRO
$ 199,00
SHOULDER STRAP
MODULAR
25 lt
FASTENING BELT
RAIN COVER
SOFT
BAGS
SOFT BAGS
NEW
11.8”
GP103
Pair of lateral bags, usable $ 349,00
as a pair or singly
SIZES
VOLUME
”
7.5
17 lt
16.5”
VELCRO
REINFORCED PARTS
FASTENING BELT
RAIN COVER
VARIOUS
”
2.6
1
14.6”
TRANSFORMABLE
VOLUME
32
40 lt
REMOVABLE MAGNETS
RAIN COVER
WATERPROOF ZIP
MAP HOLDER
T437
SHOULDER STRAP
TFS
MODULAR
Magnetic tank bag (Gold
range)
VOLUME
28
39 lt
MAGNETIC
.6”
EXPANDABLE
FASTENING BELT
TRANSFORMABLE
SIZES
9.8”>13.8”
12.2”>15”
SIZES
$ 150,00
14
11.8”
MAP HOLDER
$ 137,00
T456
RAIN COVER
SIZES
9”>14.6”
T400NN Magnetic tank bag (Easy
range)
TFS
SHOULDER STRAP
”
8.6
13”
SHOULDER STRAP
THE ITALIAN SIGN OF MOTODESIGN
Magnetic tank bag
$ 199,00
VOLUME
17
27 lt
MAGNETIC
MAP HOLDER
RAIN COVER
TRANSFORMABLE
WATERPROOF ZIP
MODULAR
TFS
35
Pair of saddle bags
VOLUME
HEAT RESISTANT
VELCRO
EXPANDABLE
11”
8.6
18.1”
SHOULDER STRAP
GP96
RAIN COVER
FASTENING BELT
SIZES
11.2”
19
25 lt
MAGNETIC
1”
”>1
SIZES
$ 163,00
.5”
5
16.5”
Pair of leather saddle bags $ 252,00
with bosses, black
T441N Rucksack (Gold range black)
VOLUME
VOLUME
SIZES
16 lt
15.4”
T431
28
34 lt
”
.8
”>9
8.1
13.8”
RAIN COVER
EXPANDABLE
$ 110,00
HELMET BAG
WATERPROOF ZIP
SOFT
BAGS
SOFT BAGS
34 lt
”
0.6
1
17.3”
T445
$ 79,00
SHOULDER STRAP
SIZES
.5”
8
”>1
9.5
35.4”
Soft bag for ATV
VOLUME
90
103 lt
SIDE BAGS VOLUME
25 lt
$ 200,00
MODULAR
T458
EXPANDABLE
Leg bag
$ 40,00
Shoulder bag
$ 89,00
SIZES
6.7”
VOLUME
SIZES
11.4”
Pair of saddlebags for V35
cases
11.8>14.2”
T443
”
2.9
4.3”
RAIN COVER
11.9”
SIZES
.9”
11
18.5”
Roll bag (Easy range)
VOLUME
33 lt
ELASTIC STRAPS
SHOULDER STRAP
T465
$ 80,00
RAIN COVER
SIZES
”
3.1
18.1”
Shoulder strap computer
bag
VOLUME
12 lt
FASTENING BELT
STRAP EMERGENCY
T466
$ 99,00
WATERPROOF ZIP
SIZES
15”
12.6”
T464
WATERPROOF ZIP
36
THE ITALIAN SIGN OF MOTODESIGN
”
2.8
11.8”
VOLUME
8 lt
SHOULDER STRAP
STRAP EMERGENCY
WATERPROOF ZIP
”
4.2
1
10.2”
VOLUME
33 lt
T459
$ 33,00
SHOULDER STRAP
SIZES
”
7.9
16.9”
Trolley bag compatible with
Monokey® / Monolock® cases
VOLUME
29 lt
TECHNOLOGY
RAIN COVER
$ 169,00
WATERPROOF ZIP
T467
TECHNOLOGY
Trolley bag compatible with
Monokey® / Monolock® cases
$ 152,00
WATERPROOF ZIP
T446
Phone holder
SIZES
RAIN COVER
$ 18,00
5.5”
4.7”
SOFT
BAGS
SOFT BAGS
8.3”
SIZES
Removable internal liner
bag
15”
T468
”
1.6
2.2”
T447
Pocket money
SIZES
RAIN COVER
$ 25,00
T448
Holder for T446 and 447
$ 30,00
”
2.4
3.9”
SOFT BAG’S COMPLEMENTS
T484
12.2”
SIZES
.8”
>9
”
6.6
18.1”
Removable internal liner bag
for Trekker cases - each
VOLUME
24
35 lt
$ 75,00
T471S Waterproof internal universal
T471L bag (capacity 32 Lt)
$ 28,00
T473
Rain cover for lateral GIVI
bags
$ 65,00
SHOULDER STRAP
THE ITALIAN SIGN OF MOTODESIGN
37
FITTING SOLUTIONS FOR SOFT BAGS
SADDLE BAG range
Mounting possibilities EASYLOCK SADDLE BAGS
EASYLOCK - TUBULAR SUPPORT FOR EASYLOCK BAGS
(it can be used also as support for soft luggage)
TPH01 - 3D range
SOFT BAGS
TE_ _ _
Insert the key into the lock and turn it, put the bag in the TE specific frame so that the two fins located at the base part
of the attachment system encompassing the bottom of the frame; now you only have to push the bag onto the frame for
fitting it.Then rotate the key in the vertical position to remove it.
For specific items’ prices for motorcycle model (TE_ _ _) see the “Guide to availability for motorcycle models” on page 69.
Mounting possibilities SADDLE BAGS
T492 - Easy range
T493 - Easy range
T449
T469 - Silver range
T479 - Silver range
T474 - Xstream range
T431
TUBULAR SUPPORT FOR SOFT BAGS
T_ _ _
In order to fix the universal side soft bags in a safe and secure way, GIVI studied and realized some stabilizing supports
for different model of motorcycles. The mounting of these side supports allows you to attach the bags in such a way as to
avoid damage due to the proximity of the exhaust pipe to the soft bags.
For specific items’ prices for motorcycle model (T_ _ _) see the “Guide to availability for motorcycle models” on page 69.
In the case there is no specific tubular support for your model of motorcycle, on which you can mount the couple of Soft Bags you choose, we suggest you to try to set the Bag you want directly
on your motorcycle, in order to check that these Bags do not get in touch with the exhaust pipe, do not get in touch with the back wheel and do not interfere with some other parts of the vehicle.
38
THE ITALIAN SIGN OF MOTODESIGN
TANK BAG range
The new universal base TFS is adaptable at all plastic tanks and it allows you to mount all the Tank bags we produce:
T494 - Easy range
T470 - Silver range
T478 - Silver range
T486 - Xstream range
T475 - Xstream range
T400NN
T400NG
T410
T426
T429
T432
T434
T436
T437
T452
T456
ATTENTION: From year 2008 the above mentioned bags have been equipped with a double loop or double ring
hooking; as for the previous years bags you`ll have to check the actual presence of these accessories.
Mounting possibilities TANK BAGS
SOFT BAGS
TFS (TANK FITTING SYSTEM)
price _
T460B
$
59.00
T460B
Mounting possibilities TANKLOCK TANK BAGS
T480 - Silver range
T489 - Silver range
T491 - Silver range
TPH02 - 3D range
TANKLOCK - TANK BAGS
BF_ _
THE ITALIAN SIGN OF MOTODESIGN
39
Mount the specific kit to the fuel tank cap and fit the bag positioning on the flange using slight amount of pressure.
To release it you simply pull the red lever positioned at the base. The flanges coupled to the system vary in the base
of the cap, therefore you must check the list of compatibility.
price _
BF_ _
$
16.00
COMPATIBILITY FLANGE
MODEL - CC. - YEAR
FLANGE
NOTE
MODEL - CC. - YEAR
FLANGE
APRILIA
RS 125
BF02
KTM
Shiver 750 / Shiver GT 750 (07 > 09)
BF02
Duke 125 (11)
Cafè Racer 899 (10)
BF02
Agusta Brutale 750 - 910 - 1078 (> 09)
BF05
Cafè Racer 1130 (10)
BF02
F4 750-1000
BF05
Titanium (10)
BF02
Tornado Naked Tre 899 (10)
BF02
SUZUKI
Tornado Naked Tre 899S (10)
BF02
GSR600 (06 > 11)
BF01
Tornado Naked Tre R160 (10)
BF02
GSX-R 600/750 (09 > 11)
BF01
GSX650F (08 > 11)
BF01
Gladius 650 (09 > 11)
BF01
BENELLI
MV
SOFT BAGS
BMW
R1200 GS (08)
BF07
DL 650 V-Strom (04 > 11)
BF10
R1200 GS (09 > 11)
BF06
DL 650 V-Strom L2 (11)
BF01
R1200 R (11)
BF06
GSF 650 Bandit / GSF 650 Bandit S K9 (09 > 11)
BF01
K1200RS (00 > 04)
BF11
GSR 750 (11)
BF01
DL 1000 V-Strom (01 > 11)
BF10
GSX-R1000 (09 > 11)
BF01
BF05
GSX1250F (10)
BF01
Monster 696 - 796 - 1100 (08 > 11)
BF09
Street Triple 675 (07 > 11)
BF02
848 - 1098 - 1198 (07 > 11)
BF08
Daytona 675
BF02
Monster 1100 Evo (11)
BF09
Tiger 800 / Tiger 800 XC (11)
BF02
Multistrada 1200 (10 > 11)
BF11
Speed Triple 1050 (05 > 11)
BF02
Speed Triple 1050 (11)
BF02
Sprint ST 1050 (05 > 11)
BF02
CAGIVA
Mito 125
DUCATI
TRIUMPH
HONDA
CB 600 F Hornet / Hornet ABS (07 > 10)
BF03
Tiger 1050 (07 > 11)
BF02
CBF 600S/ CBF 600N (04 > 11)
BF03
Sprint GT 1050 (10 > 11)
BF02
CBR 600 RR (05 > 06)
BF03
CBR 600 RR (07 > 09)
BF03
YAMAHA
CBR 600 F (11)
BF03
FZ6/FZ6 600 Fazer (04 > 06)
BF05
Hornet 600 (11)
BF03
FZ6 S2 / FZ6 600 Fazer S2 (07 > 11)
BF05
NT 700 Deauville (06 > 11)
BF03
XJ6 / XJ6 Diversion 600 (09 > 11)
BF05
XL 700 V Transalp (08 > 11)
BF03
YZF R6 (06 > 11)
BF05
VFR 800 VTEC (02 > 11)
BF03
MT 03 600 (06 > 11)
BF05
CBR 1000 RR (08 > 11)
BF03
XT 660Z Teneré (08 > 11)
BF05
CB 1000 R (08 > 11)
BF03
FZ8 / Fazer 8 (10 > 11)
BF05
CBF 1000 / CBF 1000 ST (10 > 11)
BF03
TDM 900 (02 > 11)
BF05
CBF 1000 (06 > 09)
BF03
FZ1 (06 > 11)
BF05
VFR 1200 F (10 > 11)
BF03
FZ1 Fazer (06 > 11)
BF05
YZF R1 1000 (09)
BF05
YZF R1 1000 (10 > 11)
BF05
KAWASAKI
40
BF12
ER-6N / ER-6F 650 (05 > 08)
BF04
XT 1200Z Super Teneré (10 > 11)
BF05
ER-6N / ER-6F 650 (09 > 11)
BF04
FJR 1300 (06 > 11)
BF05
ZX-6R (09 > 11)
BF04
XJR 1300 (07 > 11)
BF05
Z 750 (07 > 11)
BF04
Z1000 (10 > 11)
BF04
Z1000 SX (11)
BF04
ZX10R (10 > 11)
BF04
THE ITALIAN SIGN OF MOTODESIGN
NOTE
Mounting possibilities ENDURO TANK BAGS
T483 - Silver range
SOFT BAGS
T483 - TANK BAG FOR ENDURO BIKES WITH SPECIFIC BASE INCLUDED
Tank bag for enduro bikes with specific base included:
- BMW R1200GS (04 > 11)
- SUZUKI DL 650/1000 V-STROM (02 > 11)
- SUZUKI DL 650 V-STROM L2 (11)
- TRIUMPH Tiger 800 / Tiger 800 XC (11)
- HONDA Transalp 700 (08>09)
- KAWASAKI Versys 650 (10 > 11)
- YAMAHA XT 1200Z Super Teneré (10 > 11)
Offers the possibility to fix onto other motorcycles by checking the compatibility of the base on your tank, or by using the
straps provided.
THE ITALIAN SIGN OF MOTODESIGN
41
AIRSTAR & SPOILER
AIRSTARS
& SP0ILERS
Regarding the styles and the materials, the “screen” collection of GIVI is the largest on the market and pays much
attention to the current trends.
The range includes screens and aerodynamic spoilers equipped with specific fitting kits for the most popular naked
motorcycles, road and sportive motorcycles.
This collection also provides solutions for the proposed for tourer, sport-tourer and cruiser, with universal and dedicated
screens and windshield.
And, finally, paying attention to the scooter world, for which GIVI has been long been renowned, the windscreen for each
outbound model, from 50 cc to big engine capacity. Among the latest news we bring attention to the airstars for scooters,
complete with serigraphy at the bottom for strong visual impact and the new entry Airflow, the windscreen with adjustable
spoiler, designed by R&D department of the company, which has no rivals in terms of versatility and protection.
42
THE ITALIAN SIGN OF MOTODESIGN
COLLECTION
The appeal for “naked bikes” continues to interest a great number of motorcyclists.
For these motorcycles GIVI has developed and realized a range of universal screens with a simple but elegant design, that ensure good protection
levels without spoiling the lines of the bike. The fitting, with 2 or 4 joint points, is quick and easy thanks to the stainless steel bars with clamps
adjustable to the brackets.
The 8 models available (5 with 2 joint points and 3 with 4 joint points) meet the needs of the most demanding motorcyclists.
A660
Universal screen with 2 point
handlebar, smoked
17H x 17.2W inches
$ 147,00
A601
Universal screen with 2 point
handlebar,smoked
16.75H x 14.5W inches
$ 116,00
A602
Universal screen with 2 point
handlebar,smoked
15.75H x 21W inches
$ 142,00
A603
Universal screen with 2 point
handlebar, smoked
14.75H x 17.25W inches
$ 111,00
A604
Universal screen with 2 point
handlebar, smoked
17.5W x 14.9W inches
$ 116,00
A34+
D45
Universal screen with 4 point
handlebar, smoked
19.25H x 19.5W inches
$ 79,00
$ 71,00
A31+
D45
Universal screen with 4 point
handlebar, smoked
19.5H x 25W inches
$ 97,00
$ 71,00
A32+
D45
Universal screen with 4 point
handlebar, smoked
18H x 21W inches
$ 143,00
$ 71,00
AF49
Universal sliding wind-screen,
transparent, with 4 point handlebar
complete with fitting kit D45
$ 290,00
Maximum height 20.9 inches
(4.7 inches of extension)
width 20.5 inches
THE ITALIAN SIGN OF MOTODESIGN
AIRSTARS
& SPOILERS
AIRSTAR
43
COLLECTION
The universal GIVI cockpits represent an excellent example of the great attention that GIVI draws to the stylish design and to the quality level of its
products.
Each version is characterised by its unique style and by the capacity to perfectly adapt to the line of the front chassis. A GIVI cockpit can be light and
less intrusive or can distinguish with a determined design the character of a sportbike.
Each version is made with a painted lower part in specific colours, fitted to a plexiglass screen. The functionality of these items is guaranteed by the
use of universal fitting kits that make the fitting extremely quick and easy.
NAKED WITH UNIVERSAL FITTING KIT
A200
AIRSTARS
& SPOILERS
A750N
A750V
Universal screen, smoked
11.5H x 12W inches
Universal screen, smoked,
black bottom frame
16.5H x 15.75W inches
Replacement screen blade for
A750 (Specific screen)
Universal screen, smoked,
A750N902 black bottom frame
16.5H x 15.75W inches
Specific fitting kit / Only
A750A universal fitting kit with 2 point
handlebar
44
$ 90,00
$ 158,00
$ 55,00
A210
Universal screen, smoked
13.4H x 11.6W inches
Universal screen, smoked,
A755N black bottom frame
14.5H x 18.75W inches
A755V
Replacement screen blade for
A755 (Specific screen)
$ 100,00
240A+ Specific screen, smoked
A240A 13H x 14.25W inches
$ 195,00
$ 60,00
$ 176,00
$ 42,00
THE ITALIAN SIGN OF MOTODESIGN
$ 100,00
$ 20,00
NAKED WITH SPECIFIC FITTING KIT
$ 95,00
$ 55,00
A305
Honda CB600F Hornet (05
> 06)
Specific screen, smoked
12.3H x 16.1W inches
$ 103,00
A447
Kawasaki Z1000 (07 > 08)
Specific screen, smoked
13.4H X 13.4 W inches
$ 140,00
Yamaha FZ1 1000 (06>12)
246G730+ Specific screen, smoked, with
A282A silver bottom frame
15H x 13.25W inches
Yamaha FZ1 1000 (06>12)
246N902+ Specific screen, smoked, with
A282A black bottom frame
15H x 13.25W inches
Honda CB1000R (11 > 12)
247A+
Specific screen, smoked
A1101A
11.42H x 11.22W inches
$ 158,00
$ 57,00
A780
Ducati Monster 696-1100
(08 > 09)
Specific screen, smoked
13.4H X 15.7W inches
$ 190,00
A446
Kawasaki Z750 (07 > 08)
Specific screen, smoked
13.4 H X 13.4W inches
$ 140,00
$ 158,00
$ 57,00
$ 99,00
$ 80,00
Yamaha FZ8 / Fazer 8 (11 > 12)
$ 160,00
Specific screen, smoked
11H x 11.8W inches
Kawasaki ER-6n (09 > 11)
247N+
Specific screen, black
A448A
11.4H x 11.2W inches
$ 90,00
$ 29,00
Yamaha FZ8 / Fazer 8 (11 > 12)
$ 180,00
A287N Specific screen, black
11H x 11.8W inches
Kawasaki ER-6n (09 > 11)
247A+
Specific screen, smoked
A448A
11.4H x 11.2W inches
$ 99,00
$ 29,00
A287
THE ITALIAN SIGN OF MOTODESIGN
AIRSTARS
& SPOILERS
Suzuki GSR 600 (06 > 07)
245N+
Specific screen, black
A167A
13.19H x 11.42W inches
45
COLLECTION
Unsurpassed in the number of proposals, construction quality and aesthetic lines, the range of specific GIVI Spoilers’ highlights once again the
extensive knowledge of the field by technical staff, driven by great passion for “two wheels”.
The excellent aerodynamic performance of these accessories aesthetic / functional is accompanied by the choice between different profiles.
With heights varying from 5 / 8 cm above average, the GIVI spoiler adds a touch of personality without distorting the original design. Available for
most motorcycles on the market.
SPOILER
BMW F650GS (00 > 03)
D234S Specific screen, smoked
16H x 14W inches
$ 100,00
AIRSTARS
& SPOILERS
BMW F650GS / F800GS (08 > 12)
333DT+
$ 130,00
Specific screen, clear
$ 20,00
D333KIT
17.3H x 18.1W inches
BMW R1200GS (04 > 10)
330DT+
Specific screen, clear
D330KIT
20.3H x 22.2W inches
46
$ 154,00
$ 17,00
BMW F650GS (04 > 07)
D331ST Specific screen, clear
16.75H x 17.5W inches
$ 130,00
BMW F800S / F800ST (06 > 08)
D332ST Specific screen, clear
17.7H x 12.6W inches
$ 126,00
BMW R1200R (06 > 09)
147A+
Specific screen, clear
A147A
19.5H x 18.1W inches
$ 137,00
$ 62,00
BMW G650GS (11 > 12) NEW
D5101ST Specific screen, clear
16.14H x 15.35W inches
BMW R1150GS (00 > 03)
D233S Specific screen, clear
19.1H x 14.4W inches
D272ST
THE ITALIAN SIGN OF MOTODESIGN
Ducati Multistrada 1200
(10 > 12)
Specific screen, transparent
23.6H x 18.5W inches
$ 125,00
$ 142,00
$ 140,00
Honda CBF600S (04 > 09) /
CBF 1000 / ABS (06 > 09)
Specific screen, transparent
21.26H x 15.55W inches
$ 120,00
Honda CBR 600 F / FS (01 > 08)
$ 120,00
D213S Specific screen, smoked
17.9H x 14.6W inches
Honda VFR 1200F (10 > 12)
D321S Specific screen, smoked
15.7H x 15.7W inches
$ 140,00
DN-01 (08 > 12)
D316S Specific screen, smoked
26H X 17.7W inches
$ 140,00
Honda VFR800Vtec (02 > 09)
D217S Specific screen, smoked
20.5H x 16.9W inches
$ 116,00
Kawasaki Versys 650 (08 > 09)
D405ST Specific screen, clear
18.1H x 17.5W inches
$ 137,00
AIRSTARS
& SPOILERS
D303ST
Kawasaki Versys 650 (10 > 12)
D410ST Specific screen, clear
18.9H x 14.6W inches
$ 120,00
Kawasaki GTR 1400 (08 > 12)
D407ST Specific screen, clear
22.8H x 20.9W inches
$ 126,00
Kawasaki Ninja 1000 (11 > 12) NEW
4100D+
Specific screen, smoked
D4100KIT
22H x 14.57W inches
Suzuki GSX650F (08 > 11)
D270S Specific screen, smoked
23.5H x 16.5W inches
$ 140,00
$ 25,00
Kawasaki Z1000 (03 > 06)
D401S Specific screen, smoked
16H x 10.5W inches
$ 120,00
D252S
THE ITALIAN SIGN OF MOTODESIGN
Suzuki GSF600S (00 >04) /
GSF1200S (00 > 05)
Specific screen, smoked
17.6H x 15.6W inches
$ 106,00
$ 107,00
47
D262S
Suzuki GSF 650 Bandit S K7 / GSF
1250 Bandit S (07 > 12)
Specific screen, smoked
18H x 14.5W inches
$ 137,00
Triumph Tiger 800 (11 > 12) NEW
6401DT+
$ 140,00
Specific screen, clear
$ 40,00
D6401KIT
20.86H x 18.30W inches
Suzuki V-Strom DL650 / VStrom DL1000 (04 > 11)
Specific screen, clear
22.4H x 18.9W inches
Suzuki V-Strom DL650 L2 (12) NEW
3101DT+
$ 140,00
Specific screen, clear
$ 15,00
D3101KIT
20.5H x 18.1W inches
D260ST
Triumph Tiger 1050 (07 > 12)
D225ST Specific screen, clear
19.9H x 19.4W inches
Yamaha FZ6 Fazer S2 (07 > 09)
440D+
Specific screen, clear
D440KIT
22.44H x 22.44W inches
$ 149,00
$ 21,00
Yamaha FJR 1300 (06 > 12)
D436ST Specific screen, clear
20.5H x 19.5W inches
$ 126,00
$ 126,00
$ 125,00
AIRSTARS
& SPOILERS
FZS1000 Fazer (01 > 05)
D129S Specific screen, smoked
16.9H x 13W inches
Yamaha XTZ1200 (11 > 12)
D447ST Specific screen, clear
22.4H x 17.3W inches
48
$ 102,00
$ 150,00
Yamaha FZ1 Fazer 1000 (06 > 12)
$ 105,00
D437S Specific screen, smoked
21H x 18W inches
D610ST
Moto guzzi Stelvio 1200
(08 > 09)
Specific screen, clear
24H x 18.1W inches
$ 150,00
THE ITALIAN SIGN OF MOTODESIGN
COLLECTION
The GIVI wind-screen range couldn’t exclude the specific models for scooters and maxi scooters.
The excellent aerodynamic performance, combined with the better quality of materials used, guarantee maximum comfort during the urban and
suburban use of the vehicle. GIVI spoilers reflect the original model to avoid compromise of the vehicle’s design.
AIRSTAR FOR SCOOTER
Honda PCX 125 (10 > 12)
D322ST Specific screen, trasparent
23.4H x 17.3W inches
Honda Silver Wing 600
214DT+ (01 > 11)
D214KIT Specific screen, clear
24.8H x 23.6W inches
$ 148,00
Aprilia Atlantic 500 (02 > 06)
D240ST Specific screen, clear
25.5H x 27W inches
$ 145,00
$ 95,00
Honda SH 125-150 (10 > 11)
311A+
Specific screen,
A315A
24.8H x 27.5W inches
$ 95,00
$ 50,00
$ 105,00
$ 15,00
D293ST
Kymco Xciting 250-500 (RI)
(05 > 12)
Specific screen, clear
34.3H x 25.2W inches
$ 158,00
Piaggio MP3 500 (07 > 11)
340D+
Specific screen, smoked
D340KIT
25.25H x 21.25W inches
Honda SH 125-150 (10 > 11)
313A+
Specific screen, clear
A315A
21.6H x 25.9W inches
D294ST
THE ITALIAN SIGN OF MOTODESIGN
Kymco Downtown 125i-300i
(09 > 12)
Specific screen, clear
32.1H x 25.2W inches
$ 165,00
$ 65,00
AIRSTARS
& SPOILERS
Atlantic Atlantic 500 (05 > 11)
D242ST Specific screen, clear
33H x 27.6W inches
$ 95,00
$ 50,00
$ 170,00
49
Piaggio Vespa 125-200 Granturismo (03 > 08)
104A+ / Vespa GTS 250 (06 > 09) / Vespa LX 50-125- $ 105,00
A104A 150 (05 > 09) / Vespa GTS 300 Super (08 > 09) $ 52,00
Specific screen, clear 20.3H x 27.4W inches
Piaggio Beverly 500 (03 > 07) /
106A+ Beverly Tourer 250-500 (08 > 11)
A106A Specific screen, clear
24.2H x 22.8W inches
Piaggio Beverly 500 (03 > 07) /
103A+ Beverly Tourer 250-500 (08 > 11) $ 103,00
$ 59,00
A103A Specific screen, clear
27.5H x 23W inches
Piaggio MP3 250-400 (06 > 11)
$ 179,00
D501ST Specific screen, clear
32.3H x 25.2W inches
D258ST
Suzuki Burgman AN 400
(03 > 06)
Specific screen, clear
31.5H x 28W inches
$ 160,00
Sym Citycom 300 (08 > 11)
D650ST Specific screen, clear
25.2H x 21.7W inches
Suzuki Burgman 400 (07 > 12)
266DT+
Specific screen, clear
D266KIT
33.1H x 26.8W inches
$ 154,00
$ 25,00
D257ST
Suzuki AN 650 Burgman
(02 > 09)
Specific screen, clear
31.5H x 28.3W inches
$ 153,00
D263ST
Yamaha Majesty 400 (04 > 12)
D137ST Specific screen, clear
29.1H x 25.2W inches
$ 159,00
Yamaha T-Max 500 (08 > 11)
D442ST Specific screen, clear
19.7H x 22.44W inches
$ 120,00
AIRSTARS
& SPOILERS
$ 89,00
$ 54,00
50
$ 175,00
Suzuki AN 650 Burgman
Executive (05 > 12)
Specific screen, clear
30.9H x 28.3W inches
Yamaha T-Max 500 (08 > 11)
D442B Specific screen, black
23.23H x 17.72W inches
THE ITALIAN SIGN OF MOTODESIGN
$ 163,00
$ 155,00
COLLECTION
AIRFLOW is a universal wind-screen in the real meaning of the word. Not only because it adjusts itself to each model of motorcycle or scooter, but
also for its capacity to adjust, in a few seconds, to the motorcyclist’s height and the weather conditions. The adjustable height spoiler applied to the
base screen makes this item unique. The AIRFLOW spoiler offers a bigger visibility in case of rain, it also reduces the air turbulence and increases
the aerodynamic protection… all in a very few seconds! The spoilers’ changeable trim allows you to choose amongst three positions: low, medium
and high. The component is furthermore completely collapsible removable.
AIRFLOW
Suzuki DL650 V-Strom L2 (12) NEW
Specific sliding wind-screen,
clear, complete with fitting kit.
$ 225,00
AF3101
Maximum height inches
(4.7 inches of extension) width
16.9 inches
Suzuki DL650 V-Strom (04 > 11) /
DL1000 VStrom (04 > 11).
Specific sliding wind-screen,
$ 250,00
AF260
transparent, complete with fitting kit.
Maximum height 25.6 inches (4.7
inches of extension) width 17.3 inches
AIRSTARS
& SPOILERS
Honda Silver Wing 600 (01 > 11)
Specific sliding wind-screen, clear,
complete with fitting kit.
$ 239,00
AF214
Maximum height 22.4 inches
(4.7 inches of extension) width
23.2 inches
Suzuki Burgman 400 (07 > 12)
Specific sliding wind-screen,
clear, complete with fitting kit.
AF266
Maximum height 31.9 inches
(4.7 inches of extension)
width 26.4 inches
Yamaha T-Max 500 (08 > 11)
Specific sliding wind-screen,
transparent, complete with fitting
AF442
kit. Maximum height 35.4 inches
(4.7 inches of extension)
width 22.8 inches
$ 269,00
BMW R1200GS (04 > 10)
Specific sliding wind-screen,
transparent, complete with fitting
AF330
kit. Maximum height 21.3 inches
(4.7 inches of extension)
width 21.3 inches
$ 250,00
Piaggio MP3 250-400 (06 > 11)
Specific sliding wind-screen, clear,
complete with fitting kit.
AF504
Maximum height 29.1 inches
(4.7 inches of extension)
width 25.2 inches
$ 269,00
Yamaha XT1200Z Super Teneré
(10 > 12)
Specific sliding wind-screen,
$ 250,00
AF447
transparent, complete with fitting kit.
Maximum height 24 inches (4.7 inches
of extension), width 16.9 inches
Triumph Tiger 800 (11 > 12) NEW
Specific sliding wind-screen,
clear complete with fitting kit.
AF6401
Maximum height 23.8
(4.7 inches extension) width
17.9 inches
THE ITALIAN SIGN OF MOTODESIGN
$ 239,00
$ 250,00
51
S310 - TREKKER LIGHTS
Pair of universal additional spotlights with halogen
lights, to be mounted on tubular engine guards (ø
minimum 21mm and ø maximum 26mm). They must
be connected to the battery of the motorcycle, and they
have a switch to be mounted onto a tubular handlebar.
They do not require any modification to the electrical
system of the motorcycle.
S310
Additional halogen spotlights
$ 199,00
info
S950
The New GIVI S950 GPS system carrier easily fits to majority of
motorcycles and to some scooters, since it can be mounted to
tubular handlebars through the robust supports with which it is
equipped. Moreover, it can be easily locked thanks to the rapid
lock/unlock system. The S950 permits the use of the same device
you have in your car, or your smart phone (if it is fitted out with
integrated GPS system and with satellite navigation software),
since it allows for both horizontal and vertical screen viewing.
There is also access for external cables. The S950 external
protective cover is semi-rigid and the device is equipped with a
practical anti-rain lining, which guarantees an effective barrier for
water, without interfering with the use.
ACCESSORIES
S950
Universal holder
$ 75,00
info
Material: Nylon / EVA
S850
The new GPS universal holder S850 enables the use of the most
widespread GPS models available for cars on the bike.
The fitting of the S850 does not require brackets or other supports
as it is mounted directly on the handlebar of the motorbike or
scooter through Velcro straps. The S850 is equipped with a main
compartment for the GPS (provided with an exit for any cable of
the GPS) and also with a further compartment for small items
(keys, mobile phone, etc…). All zips are waterproof and to ensure
a total water resistance it comes complete with a rain cover.
S850
Universal holder
$ 65,00
info
Material: Nylon / PU
52
THE ITALIAN SIGN OF MOTODESIGN
TC400
In order to maximize comfort when using motorcycles and
scooters in winter season, GIVI have released the new
NECK SAFER TC400. It is designed to be worn under
the jacket collar and its role is to protect the neck from the
annoying cold air draughts. Thanks to easy and adjustable
closing with a Velcro strap it is adjustable to any size. Filled
with soft filling and recovered with a special pile tissue, the
TC400 ensures a soft and warm agreeable sensation.
TC400
Neck safer
$ 15,00
info
Material: soft filling / pile tissue
TM418
Yet another URBAN model, this time to mount on
your vehicle. It is a previously unseen version of
hand protectors: GIVI has made them in rain resistant
polyester with an internal lining that keeps the fingers
warm in all conditions. The use is universal as the
TM418 pair adapts to every type of handle-bar and rearview mirror. The structure is rather rigid for easier and
quicker accessibility of the hands.
TM418
Pair of protective handle-bar
gloves for motorcycles and
scooters adjustable for use
with fixed mirror.
$ 99,00
info
Material: nylon
Inner linning: lambkin
ACCESSORIES
S200
Provides dust protection during the winter rest
S200
Bike cover.
Colour: light grey (not
waterproof)
$ 35,00
info
Material: transpirant texture
THE ITALIAN SIGN OF MOTODESIGN
53
T10N
Elastic carrying net to fasten various objects on the
cover of the cases or on the luggage carrier of the
motorcycle.
T10N
E125
Elastic carryng net
Four rings kit for T10N elastic
net anchor. The rings must
be anchored to the case by
making four holes of ø10mm
$ 17,00
$ 12,00
info
S300
Security accessories kit complete with reflector triangle
and reflective jacket.
S300
Security accessories kit
complete
$ 22,00
info
ACCESSORIES
54
THE ITALIAN SIGN OF MOTODESIGN
ENGINE GUARDS
Conceived with the aim to provide side protection to the propulsors of trail bikes, the engine guard
is today a very useful accessory also for riders of naked and custom bikes as well as of unfaired/
semi-faired bikes. Should a fall of the motorcycle occur, for instance while on the stand, the engine
guard may really reduce damages.
The wide range of engine guards developed and produced by GIVI includes specific solutions for
a lot of bike models (for custom motorcycles they are available chromed).
The characteristics of the materials used offer an excellent result, guaranteed by the long GIVI
experience.
info
Material: metal
Finished in black mat or chromed depending on the different motorcycle models
TN690
BMW F650GS / F800GS
(08>11)
$ 220,00
BMW R1200 GS (04>10)
$ 210,00
TN422
KAWASAKI VERSYS 650
(10>12)
$ 200,00
TN226
Triumph Street Triple 675
$ 190,00
TN225
Triumph Tiger 1050
(07>12)
$ 189,00
TN532
Suzuki DL 650 V-Strom
(04>12)
$ 171,00
TN528
Suzuki DL 1000 V-Strom
(02>09)
$ 153,00
TN358
Yamaha FZ6 S2 / FZ6 Fazer S2 (07>09)
FZ6 / FZ6 Fazer (04>09)
$ 174,00
TN357
Yamaha FZ1 (06>12)
$ 195,00
TN352
Yamaha FZ8 / Fazer 8
(10>12)
$ 160,00
BACKRESTS &
ENGINE GUARDS
TN689
THE ITALIAN SIGN OF MOTODESIGN
55
BACKRESTS
GIVI satisfies not only the motorcyclist’s needs, but the passenger’s needs too.
A wide range of specific backrests made in Polyurethane foam, provides more comfort to the
journey of the passenger. It can be mounted with or without the case (it depends on the model of
the case).
You will find some mounting examples, please view our list in order to verify the availability on other
motorcycle models not illustrated in here.
info
Holders material: metal
Backrests material: Polyurethane foam
TB82
Kymco Downtown
125i - 300i (09 > 12)
$ 85,00
TB53
Yamaha T-Max 500
(08 > 11)
$ 110,00
TB106
Piaggio MP3 125-250-400
(06 > 11)
TB48
Yamaha Majesty 400
(04 > 11)
$ 132,00
TB19
Honda Silver Wing 600 (01 > 11)
$ 79,00
TB531
Suzuki Burgman 400
(07 > 12)
$ 74,00
$ 69,00
BACKRESTS &
ENGINE GUARDS
56
THE ITALIAN SIGN OF MOTODESIGN
SPORTCITY ONE 50-125 (08 > 11)
price
SR740
134A
136A
A151A
Specific plate for
MONOLOCK® boxes.
Maximum load allowed 3 kg /
use the plate included in the
box
Specific screen, transparent
26H x 26.4W inches
Specific screen, transparent
29.1H x 26.4W inches
Specific fitting kit for 134A and
136A
$ 135,00
$ 90,00
$ 110,00
$ 80,00
accessories
SR740
134A + A151A
136A + A151A
SPORTCITY CUBE 125-200-300 (08 > 11)
price
E319
134A
136A
A150A
Specific rear plate for
MONOLOCK® case
Specific screen, transparent
26H x 26.4W inches
Specific screen, transparent
29.1H x 26.4W inches
Specific fitting kit for 134A and
136A
$ 60,00
$ 90,00
$ 110,00
$ 75,00
accessories
134A + A150A
THE ITALIAN SIGN OF MOTODESIGN
GALLERY
E319
57
F 650 GS / F 800 GS (08 > 12)
price
Specific rear plate for
MONOKEY® case.
MONOKEY® plate M5 in nylon
included / Is compatible with
the rear plate
Tubular pannier holder for
MONOKEY® boxes. Mounting
is only possible with the plate
E194
Specific screen, clear
17.3H x 18.1W inches.
10.24 inches higher than
F650GS / 8.66 inches higher
than F800GS
Specific fitting kit for 333DT
Specific engine guard. We
recommend fitting by a
qualified mechanic
E194
PL690
333DT
D333KIT
TN690
$ 110,00
$ 220,00
$ 130,00
$ 20,00
$ 220,00
accessories
E194
PL690
333DT
R 1200 GS (04 > 12)
TN690
price
Specific plate in aluminium for Monokey®
cases. It can be fit with the original sidecase / maximum load allowed 6 kg / It
does not allow the assembly of the stop
light kit or the remote control device on
the case / compatible from ’07 to ’11
Specific plate for MONOKEY® boxes.
MONOKEY® plate M5 in nylon included / in
replacement of original rack / is compatible
with the original side case holder
Specific plate for MONOKEY® boxes.
To fit to the original rack / maximum
load allowed 6 Kg / MONOKEY®
plate M5 in nylon included
Tubular pannier holder for
MONOKEY® boxes
Rapid release tubular side-case
holder for MONOKEY® cases
Specific screen, clear 20.3H x 22.2W
inches. 5.7 inches higher than
original / adjustable as the original
Specific fitting kit for 330DT
Specific sliding wind-screen,
transparent, complete with fitting kit.
Maximum height 21.3 inches (4.7
inches of extension) width 21.3 inches
Specific engine guard. We recommend
fitting by a qualified mechanic
SRA692
SR689
SR684
PL684
PLR684
330DT
D330KIT
AF330
accessories
GALLERY
SRA692
58
TN689
PLR684
PLR684
AF330
THE ITALIAN SIGN OF MOTODESIGN
TN689
$ 275,00
$ 126,00
$ 108,00
$ 206,00
$ 229,00
$ 154,00
$ 17,00
$ 250,00
$ 210,00
MULTISTRADA (10 > 12)
price
SR312
PLXR312
D272ST
Specific plate for MONOKEY®
boxes. MONOKEY® plate
M5 in nylon included / is
compatible with the original
side case holder
Rapid release tubular sidecase holder for MONOKEY®
SIDE cases. You can mount
only V35 MONOKEY®
SIDECASES
Specific screen, transparent
23.6H x 18.5W inches. 3.5
inches higher than original
$ 150,00
$ 229,00
$ 140,00
accessories
SR312
PLXR312
PLXR312
PCX 125 (10 > 11)
D272ST
price
E231
D322ST
D322S
323DT
D323KIT
Specific rear plate for
MONOLOCK® case.
Maximum load allowed 3 kg /
use the plate included in the
box / you must puncture the
housing in arranged sections
Specific screen, trasparent,
23.4H x 17.3W inches.
7.3 inches higher than original
Specific screen, smoked,
23.4H x 17.3W inches
Specific screen, transparent
32.2H x 22.8W inches
Specific fitting kit for 323DT
$ 50,00
$ 95,00
$ 99,00
$ 175,00
$ 12,00
accessories
D322ST
D322S
323DT + D323KIT
THE ITALIAN SIGN OF MOTODESIGN
GALLERY
E231
59
SH 125I-150I (09 > 11)
price
Specific rear plate for
MONOLOCK® case. Maximum
load allowed 3 kg / use the
plate included in the box
Single tubular side-case
holder. Compatible with the
following Soft Bags:
T467 - T457 - T450 / You have
to mount it on the right side of
the scooter
Specific screen, transparent
24.8H x 27.5W inches
Specific screen, transparent
21.6H x 25.9W inches
Specific fitting kit for 311A,
313A and 311ASP
E227
P205
311A
313A
A315A
$ 35,00
$ 95,00
$ 95,00
$ 95,00
$ 50,00
accessories
E227
P205
311A
DN-01 (08 > 12)
313A
price
265FZ
PLX204
D316S
accessories
GALLERY
265FZ
60
PLX204
D316S
THE ITALIAN SIGN OF MOTODESIGN
Specific Monorack arms.
Only match the plates M5,
M11, M5M, M6M / maximum
load allowed 6 Kg
Tubular pannier holder for
V35 MONOKEY® SIDE cases.
You can mount only V35
MONOKEY® SIDE CASES /
is mounted in conjuction with
Monorack
Specific screen, smoked
26H X 17.7W inches
$ 106,00
$ 221,00
$ 140,00
NT 700 DEAUVILLE (06 > 11)
price
E221
E221M
D307ST
Specific rear plate for
MONOKEY® case.
MONOKEY® plate M5 in nylon
included/ for fixing the original
lid must be drilled
Specific rear plate for
MONOLOCK® case.
MONOLOCK® plate M5M in
nylon included/ for fixing the
original lid must be drilled
Specific screen, transparent
19.29H x 18.31W inches.
3.54 inches higher than the
original
$ 110,00
$ 110,00
$ 100,00
accessories
E221
E221M
D307ST
CB 1000 R (08 > 11)
price
266FZ
A1101A*
TE1101
1101KIT
*
Specific Monorack arms.
Only match the plates M5,
M5M
Specific fitting kit for
247A and 247N.
Compatible from ’11
Specific tubular holder for
Easylock bags; it can be used
also as holder for soft luggage.
Can be mounted without the
Monorack using the 1101KIT
Specific kit to install the
TE1101 without the Monorack
$ 116,00
$ 80,00
$ 120,00
$ 70,00
you can find spoilers prices on page 45
accessories
247A + A1101A
TE1101
THE ITALIAN SIGN OF MOTODESIGN
GALLERY
266FZ
61
VFR 1200 F (10 > 12)
price
Specific Monorack arms.
Only match the plates M5,
M5M / A larger grab rail for
the passenger is included,
you must remove the original
grab rails / is compatible with
the original side case holder
Tubular pannier holder for
V35 MONOKEY® SIDE cases.
You can mount only V35
MONOKEY® SIDE CASES /
can be mounted without the
Monorack using the 267KIT
Specific kit to install the PLX
without the Monorack
Specific screen, smoked
15.7H x 15.7W inches.
5.5 inches higher than original
267FZ
PLX209
267KIT
D321S
$ 116,00
$ 189,00
$ 90,00
$ 140,00
accessories
267FZ
PLX209
D321S
650R NINJA / ER-6N (09 > 11)
price
Specific Monorack arms.
You need to remove the
handle bar of the scooter to
install it
Tubular pannier holder for
V35 MONOKEY® SIDE cases.
You can mount only V35
MONOKEY® SIDE CASES /
PLX449
original grabrails should be
removed / can be mounted
without the Monorack using
the PLX449KIT
Specific kit to install the PLX
PLX449KIT
without the Monorack
Specific fitting kit for 247N.
A448A*
Only for 6N models
Specific screen, smoked
44 x 35 cm (H x W).
D409S
6 cm higher than original / only
for ER-6F
Specific tubular holder for
TE266*
Easylock bags; it can be used
also as holder for soft luggage
449FZ
*
you can find spoilers prices on page 45
accessories
GALLERY
449FZ
62
PLX449
A448A
D409S
THE ITALIAN SIGN OF MOTODESIGN
TE266
$ 95,00
$ 221,00
$ 99,00
$ 29,00
$ TBD
$ 120,00
VERSYS 650 (08 > 09)
price
Specific Monorack arms.
Only match the plates M5,
M5M, M6M / including fixing kit
Tubular pannier holder for
MONOKEY® boxes.
PL447
Can be mounted without
the Monorack using the
PLX447KIT
Tubular pannier holder for
V35 MONOKEY® SIDE cases.
You can mount only V35
PLX447
MONOKEY® SIDE CASES
/ can be mounted without
the Monorack using the
PLX447KIT
Specific kit to install the PLX
PLX447KIT
without the Monorack
Specific screen, clear
D405ST
18.1H x 17.5W inches
447FZ
$ 95,00
$ 189,00
$ 221,00
$ 27,00
$ 137,00
accessories
447FZ
PL447
PLX447
VERSYS 650 (10 > 12)
D405ST
price
451FZ
PLR450
PLXR450
450KIT
D410ST
TN422
Specific Monorack arms.
Only match the plates M5,
M5M
Rapid release tubular sidecase holder for MONOKEY®
cases. Can be mounted
without the Monorack using
the 450KIT
Rapid release tubular sidecase holder for MONOKEY®
SIDE cases.
You can mount only V35
MONOKEY® SIDECASES /
can be mounted without the
Monorack using the 450KIT
Specific kit to install the PLR
and the PLXR without the
Monorack
Specific screen, transparent
18.9H x 14.6W inches.
8.3 inches higher than original
Specific engine guard.
We recommend fitting by a
qualified mechanic
$ 95,00
$ 229,00
$ 229,00
$ 75,00
$ 120,00
$ 200,00
accessories
PLR450
PLR450
D410ST
THE ITALIAN SIGN OF MOTODESIGN
TN422
GALLERY
451FZ
63
NINJA 1000 (11 > 12)
price
Specific Monorack arms.
Only match the plates M5,
4100FZ
M11, M5M / it is not compatible
with the original sidecase
holder
Rapid release tubular sidecase holder for MONOKEY®
SIDE cases.
PLXR4100 You can mount only V35
MONOKEY® SIDECASES /
can be mounted without the
Monorack using the 4100KIT
Specific kit to install the
4100KIT
PLXR4100 without the
Monorack
Specific screen, smoked
22H x 14.57W inches.
4100D
5.51 inches higher than
original
D4100KIT Specific fitting kit for 4100D
Specific tubular holder for
TE4100
Easylock bags; it can be used
also as holder for soft luggage
$ 116,00
$ 229,00
$ 99,00
$ 140,00
$ 25,00
$ 120,00
accessories
4100FZ
PLXR4100
PLXR4100
Z 1000 (10 > 12)
4100D
price
450FZ
A449
T267
T267KIT
accessories
GALLERY
450FZ
64
A449
T267
THE ITALIAN SIGN OF MOTODESIGN
Specific Monorack arms.
Only match the plates M5,
M5M / maximum load allowed
6 Kg
Specific screen, smoked
16.5H x 14.2W inches.
Including fixing kit
Tubular side holder for soft
luggage. Can be mounted
without the Monorack using
the T267KIT
Specific fitting kit for tubular
holder
$ 116,00
$ 190,00
$ 89,00
$ 50,00
DL 650 V-STROM (04 > 11)
price
E528
PL532
PLR532
PLX532
D260ST
AF260
TN532
accessories
E528
PLR532
PLX532
GLADIUS 650 (09 > 11)
Specific rear plate for
MONOKEY® case.
MONOKEY® plate E250
included
Tubular pannier holder for
MONOKEY® boxes. To be
mounted using original bolts
Rapid release tubular sidecase holder for MONOKEY®
cases
Tubular pannier holder for
V35 MONOKEY® SIDE cases.
You can mount only V35
MONOKEY® SIDE CASES
Specific screen, clear 22.4H
x 18.9W inches. 7.09 inches
higher than the original
Specific sliding wind-screen,
transparent, complete with
fitting kit.
Maximum height 25.6 inches
(4.7 inches of extension) width
17.3 inches
Specific engine guard.
We recommend fitting by a
qualified mechanic
AF260
$ 91,00
$ 171,00
$ 229,00
$ 189,00
$ 125,00
$ 250,00
$ 171,00
TN532
price
SR121
SR121M
PLX540
Specific plate for MONOKEY®
boxes. MONOKEY® plate M5
in nylon included / you must
remove the grabrails, they are
reproduced by the rack itself /
maximum load allowed 6 kg
Specific plate for
MONOLOCK® boxes.
MONOLOCK® plate M5M in
nylon included / you must
remove the grabrails, they are
reproduced by the rack itself /
maximum load allowed 6 kg
Tubular pannier holder for
V35 MONOKEY® SIDE cases.
You can mount only V35
MONOKEY® SIDE CASES
$ 120,00
$ 120,00
$ 221,00
accessories
PLX540
THE ITALIAN SIGN OF MOTODESIGN
GALLERY
SR121
65
TIGER 800 / TIGER 800 XC (11 > 12)
price
Specific plate in aluminium for
Monokey® cases.
Maximum load allowed 6 kg / It
does not allow the assembly of
SRA6401
the stop light kit or the remote
control device on the case /
you must puncture the housing
in arranged sections
Rapid release tubular
PLR6401 side-case holder for
MONOKEY® cases
Specific screen, clear
6401DT
20.86H x 18.30W inches.
6.7 inches higher than original
D6401KIT Specific fitting kit for 6401DT
Specific sliding wind-screen
clear, complete with fitting kit.
AF6401
Maximum height 23.8
(4.7 inches extension)
width 17.9 inches
Specific engine guard.
TN6401
We recommend fitting by a
qualified mechanic
$ 250,00
$ 229,00
$ 140,00
$ 40,00
$ 250,00
$ 189,00
accessories
SRA6401
PLR6401
6401DT
TIGER 1050 (07 > 12)
AF6401
price
Specific plate for MONOKEY®
boxes. MONOKEY® plate M5
in nylon included / maximum
load allowed 6 Kg / it is not
compatible with the original
sidecase holder
Tubular pannier holder
for MONOKEY® boxes. Is
mounted in conjuction with
Monorack
Specific screen, clear
19.9H x 19.4W inches.
4.9 inches higher than the
original
Specific kit to install the T704
without the plate
Tubular side holder for soft
luggage. can be mounted
without the SR225 using the
T700KIT
Tubular side holder for soft
luggage. Can be mounted
without the SR225 using the
T700KIT
Specific engine guard.
We recommend fitting by a
qualified mechanic
SR225
PL727
D225ST
T700KIT
T700
T704
TN225
accessories
GALLERY
SR225
66
PL727
D225ST
TN6401
T704
THE ITALIAN SIGN OF MOTODESIGN
TN225
$ 126,00
$ 179,00
$ 126,00
$ 50,00
$ 74,00
$ 115,00
$ 189,00
FZ-6 S2 / FZ6 FAZER S2 (07 > 09)
price
351FZ
PL360
PLX360
351KIT
440D
D440KIT
A284A *
accessories
TN358
TE351
*
440D
$ 189,00
$ 37,00
$ 149,00
$ 21,00
$ 65,00
$ 174,00
$ 120,00
you can find spoilers prices on page 45
price
366FZ
PLXR366
TE366
366KIT
A287
A287N
TN352
accessories
PLXR366
$ 189,00
TN358
FZ-8 / FAZER 8 (11 > 12)
366FZ
$ 95,00
A287
Specific Monorack arms.
Only match the plates M5,
M5M / maximum load allowed
6 Kg
Rapid release tubular side-case
holder for MONOKEY® SIDE
cases. You can mount only
V35 MONOKEY® SIDECASES
/ can be mounted without the
Monorack using the 366KIT
Specific tubular holder for
Easylock bags; it can be used also
as holder for soft luggage. Can
be mounted without the 366FZ
Monorack using the 366KIT
Specific kit to install the
PLXR366 without the
Monorack
Specific screen, smoked
11H x 11.8W inches. Including
fixing kit / not for faired version
Specific screen, black
11H x 11.8W inches
Specific engine guard.
We recommend fitting by a
qualified mechanic
A287N
THE ITALIAN SIGN OF MOTODESIGN
$ 106,00
$ 229,00
$ 120,00
$ 40,00
$ 160,00
$ 180,00
$ 160,00
TN352
GALLERY
351FZ + PL360
Specific Monorack arms.
Only match the plates M5,
M11, M5M, M6M
Tubular pannier holder for
MONOKEY® boxes. Can be
mounted without the Monorack
using the 351KIT
Tubular pannier holder for
V35 MONOKEY® SIDE cases.
You can mount only V35
MONOKEY® SIDE CASES /
can be mounted without the
Monorack using the 351KIT
Specific kit to install the
PL360 and T351 without the
Monorack
Specific screen, clear
22.44H x 22.44W inches.
7.48 inches higher than the
original / for faired version
Specific fitting kit for 440D.
For faired version
Specific fitting kit for 245A,
245N, 246_ _ _.
Not for faired version
Specific engine guard.
We recommend fitting by a
qualified mechanic / mount
with central tripod mounted
Specific tubular holder for
Easylock bags; it can be used
also as holder for soft luggage.
Can be mounted without the
Monorack using the 351KIT
67
FZ-1 (06 > 12)
price
365FZ
PLX359
PLXR359
365KIT
accessories
TN357
A282A*
T271
*
PLX359
PLXR359
Specific Monorack arms.
We recommend mounting
smaller cases MONOLOCK® in
conjunction with M5M or M6M
plate / It requires fitment of
cases up to 35 ltr / maximum
load allowed 6 kg
Tubular pannier holder for
V35 MONOKEY® SIDE cases.
You can mount only V35
MONOKEY® SIDECASES /
you must move the indicators
from their original position /
can be mounted without the
Monorack using the 365KIT
Tubular pannier holder for V35
MONOKEY® SIDE cases. You
must move the indicators from
their original position / you can
mount only V35 MONOKEY®
SIDECASES® SIDE V35 /
can be mounted without the
Monorack using the 365KIT
Specific kit to install the PLX
and the PLXR without the
Monorack
Specific engine guard.
We recommend fitting by a
qualified mechanic
Specific fitting kit for 245A,
245N and 246_ _ _
Tubular side holder for soft
luggage. Can be mounted
without Monorack
$ 30,00
$ 195,00
$ 57,00
$ 69,00
price
Specific plate for MONOKEY®
boxes. MONOKEY® plate
M5 in nylon included / is
compatible with the original
side case holder / to open
the original side -cases you
ought to remove the back top
case from the plate
Rapid release tubular sidecase holder for MONOKEY®
cases
Specific screen, clear
22.4H x 17.3W inches.
5.1 inches higher than the
original
Specific sliding wind-screen,
clear, complete with fitting kit.
Maximum height 24 inches
(4.7 inches of extension), width
16.9 inches
Specific engine guard.
We recommend fitting by a
qualified mechanic
PLR367
D447ST
AF447
TN355
accessories
GALLERY
68
$ 229,00
you can find spoilers prices on page 45
SR371
PLR367
$ 215,00
TN357
XTZ 1200 (11 > 12)
SR371
$ 106,00
D447ST
AF447
THE ITALIAN SIGN OF MOTODESIGN
TN355
$ 115,00
$ 229,00
$ 150,00
$ 250,00
$ 160,00
CODE
DESCRIPTION
NOTE
PRICE
PLATE
M3
DESCRIPTION
MONORACK
...F
Monokey® Plate in nylon with joint set included to be used with Monorack F
PRICE
$
62,00
M35
Monokey Plate in aluminium with joint set included to be used with Monorack FL
. . . FL
$
69,00
MM
Monolock® Plate in aluminium with joint set included to be used with Monorack F
...F
$
62,00
®
M5
Monokey Plate in nylon to be used with Monorack FZ
. . . FZ
$
62,00
M5M
Monolock® Plate in nylon to be used with Monorack FZ
. . . FZ
$
62,00
. . . FZ
$
0,00
®
M11*
Monokey Plate in steel to be used with Monorack FZ
E250
Monokey universal plate with fitting kit included for mounting it to tubular carriers
$
70,00
N150
Wingrack2 side frames with indicators included, for 2 Monokey® side bags
$
148,00
N151
Wingrack2 side frames without indicators for 3 Monokey side cases
$
115,00
N140
Wingrack2 side frames with indicators included, for 3 Monokey® side cases
$
222,00
N141
Wingrack2 side frames without indicators, for 3 Monokey® side cases
$
180,00
PA01
Fins and Monokey® plate in aluminium, to be used with PLA
$
82,00
PB02
Fins and Monokey plate in aluminium, to be used with PLB
$
82,00
®
®
®
®
APRILIA - BMW
CAN AM - DUCATI
PLATES / WINGRACK CHASSIS / FINS
*It does not allow the mounting of the stop light kit
IMPORTANT:
ALL
MONORACK
LUGGAGE CARRIER SIDE ARMS ARE SOLD SEPARATELY FROM PLATES AND JOIN SET, SO TO OBTAIN A COMPLETE CARRIER YOU WILL HAVE TO ORDER TWO
DIFFERENT ARTICLES (SEE LIST BELOW).
MODELS.
THE
DIFFERENT PRICES FOR THE SIDE ARMS ARE DUE TO THE DIFFERENT COMPLEXITY OF THE CARRIERS WHICH VARY ACCORDING TO MOTORCYCLE
CODE
DESCRIPTION
NOTE
PRICE
APRILIA
SPORTCITY ONE 50-125 (08 > 12)
SR740
Specific plate for MONOLOCK® boxes
134A
Specific screen, transparent 26H x 26.4W inches
$
90,00
136A
Specific screen, transparent 29.1H x 26.4W inches
$
110,00
A151A
Specific fitting kit for 134A and 136A
$
80,00
use the plate included in the box
$
72,00
MONOLOCK® plate M5M in nylon included
$
91,00
7.5 inches higher than original
$
148,00
use the plate included in the box
$
55,00
maximum load allowed 3 kg / use the plate included in the box
$
135,00
SR 50 DITECH (97 > 03)
SR78
Specific plate for MONOLOCK® boxes
ATLANTIC 200-250 (03 > 09)
E314M
Specific rear plate for MONOLOCK® case
D242ST *
Specific screen, clear 33.1H x 27.6W inches
* The Item is sold in packs of two pieces and it is not available individually
SCARABEO 200 (08 > 12)
E318
Specific rear plate for MONOLOCK® case
154A
Specific screen, transparent 20.8H x 27.5H inches
$
99,00
A154A
Specific fitting kit for 154A
$
40,00
SPORTCITY 125-200-250 (04 > 08)
E316
Specific rear plate for MONOLOCK® case
128A
Specific screen, clear
use the plate included in the box
$
30,00
3.1 inches higher than 105A
$
116,00
105A
A129A
Specific screen, clear 26H x 26.4W inches
$
84,00
Specific fitting kit for 105A and 128A
$
67,00
THE ITALIAN SIGN OF MOTODESIGN
69
CODE
DESCRIPTION
NOTE
PRICE
SPORTCITY CUBE 125-200-300 (08 > 12)
APRILIA - BMW
CAN AM - DUCATI
E319
Specific rear plate for MONOLOCK® case
$
60,00
134A
Specific screen, transparent 26H x 26.4W inches
$
90,00
136A
Specific screen, transparent 29.1H x 26.4W inches
$
110,00
A150A
Specific fitting kit for 134A and 136A
$
75,00
7.1 inches higher than original
$
141,00
MONOLOCK® plate M5M in nylon included / you must puncture the
housing in arranged sections / maximum load allowed 3 Kg
SCARABEO 500 (03 > 06)
D243ST
Specific screen, clear 26H x 23W inches
SCARABEO 500 (07 > 12)
E317M
Specific rear plate for MONOLOCK® case
$
104,00
130A
Specific screen, clear 28H x 28W inches
$
105,00
A130A
Specific fitting kit for 130A
$
7,00
use the plate included in the box
$
112,00
3.5 inches higher than original
$
145,00
maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included /
you must puncture the housing in arranged sections
MONOLOCK® plate M5M in nylon included / you must puncture the
housing in arranged sections
$
180,00
$
180,00
ATLANTIC 500 (02 > 06)
SR76M
Specific plate for MONOLOCK® boxes
D240ST
Specific screen, clear 25.5H x 27W inches
DORSODURO 750 (11 > 12)
SR6700
Specific plate for MONOKEY® boxes
SR6700M
Specific plate for MONOLOCK boxes
TE6700
Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
$
120,00
Tubular side holder for soft luggage
$
100,00
®
SHIVER 750 (07 > 10)
T770
SHIVER 750 (11 > 12) NEW
only match the plates M5, M11, M5M / A handle bar for the passenger is
included, you must remove the original grab rails
6702FZ
Specific Monorack arms
TE6702
Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
$
116,00
$
120,00
$
89,00
MANA 850 (09 > 12)
732FZ
only match the plates M5, M5M / you must remove the grab handles / is
compatible with the original side case holder
Specific Monorack arms
ETV 1000 CAPONORD (01 > 08)
PL313
Tubular pannier holder for MONOKEY® boxes
D239ST
Specific screen, clear 25H x 18.25W inches
$
216,00
compatible with year 2003 / without protective spoiler
$
112,00
MONOLOCK® plate M5M in nylon included / maximum load allowed
8 Kg
$
132,00
only match the plates M2, M3, MM / compatible from august ’00 / it is
not compatible with the original sidecase holder
$
78,00
BMW
F 650 CS (02 > 06)
SR682M
Specific plate for MONOLOCK® boxes
F 650 GS (00 > 04)
70
639F
Specific Monorack arms
PL188
Tubular pannier holder for MONOKEY boxes
$
172,00
D234S
Specific screen, smoked 16H x 14W inches
$
100,00
®
= Item available until it runs out of stock
CODE
DESCRIPTION
NOTE
PRICE
SR685
Specific plate for MONOKEY® boxes
$
103,00
PL188
Tubular pannier holder for MONOKEY® boxes
$
172,00
D331ST
Specific screen, clear 16.75H x 17.5W inches
6.1 inches higher than original / not mounted with original guards
$
130,00
MONOKEY® plate M5 in nylon included / Is compatible with the rear
plate
$
110,00
mounting is only possible with the plate E194
$
220,00
10.24 inches higher than F650GS / 8.66 inches higher than F800GS
$
130,00
APRILIA - BMW
CAN AM - DUCATI
F 650 GS (05 > 07) / G 650 GS (08 > 11)
F 650 GS / F 800 GS (08 > 12)
E194
Specific rear plate for MONOKEY® case
PL690
Tubular pannier holder for MONOKEY boxes
333DT
Specific screen, clear 17.3H x 18.1W inches
D333KIT
Specific fitting kit for 333DT
TN690
Specific engine guard
®
$
20,00
we recommend fitting by a qualified mechanic
$
220,00
it is not compatible with the original sidecase holder / only match the
plates M2, M3, MM
$
78,00
F 650 GS DAKAR (00 > 03)
639F
Specific Monorack arms
PL188
Tubular pannier holder for MONOKEY boxes
$
172,00
PL185
Tubular pannier holder for MONOKEY® boxes
$
133,00
D232S
Specific screen, smoked 16.9H x 16.3W inches
$
100,00
SR685
Specific plate for MONOKEY® cases
$
103,00
PL188
Tubular Sidecase holder for MONOKEY® cases
$
172,00
D5101ST
Specific screen, clear 16.14H x 15.35W inches
TN5101
Specific engine guard
®
F 650 ST (97 > 99)
G 650 GS (12) NEW
8.66 inches higher that the original
$
125,00
we recommend fitting by a qualified mechanic
$
200,00
K75
E180
Specific rear plate for MONOKEY® case
with plate in aluminium
$
96,00
E181
Specific rear plate for MONOKEY® case
with plate in nylon
$
91,00
E194
Specific rear plate for MONOKEY® case
MONOKEY® plate M5 in nylon included / Is compatible with the rear
plate
PL690
Tubular pannier holder for MONOKEY boxes
333DT
Specific screen, clear 17.3H x 18.1W inches
D333KIT
Specific fitting kit for 333DT
$
20,00
TN690
Specific engine guard
we recommend fitting by a qualified mechanic
$
220,00
Specific engine guard
we recommend fitting by a qualified mechanic
$
180,00
only match the plates M5, M5M
$
89,00
you can mount only V35 MONOKEY SIDE CASES
$
231,00
6.7 inches higher than original F800S
$
126,00
you can mount only V35 MONOKEY® SIDE CASES
$
231,00
6.7 inches higher than original F800ST
$
126,00
F 800 GS (08 > 09)
®
$
110,00
mounting is only possible with the plate E194
$
220,00
10.24 inches higher than F650GS / 8.66 inches higher than F800GS
$
130,00
F 800 R (11 > 12)
TN691
F 800 S (06 > 10)
687FZ
Specific Monorack arms
PLX687
Tubular pannier holder for V35 MONOKEY SIDE cases
D332ST
Specific screen, clear 17.7H x 12.6W inches
®
®
F 800 ST (06 > 12)
PLX687
Tubular pannier holder for V35 MONOKEY® SIDE cases
D332ST
Specific screen, clear 17.7H x 12.6W inches
THE ITALIAN SIGN OF MOTODESIGN
71
CODE
DESCRIPTION
NOTE
PRICE
K 100 (90)
APRILIA - BMW
CAN AM - DUCATI
E180
Specific rear plate for MONOKEY® case
with plate in aluminium
$
96,00
E181
Specific rear plate for MONOKEY® case
with plate in nylon
$
91,00
E180
Specific rear plate for MONOKEY® case
with plate in aluminium
$
96,00
E181
Specific rear plate for MONOKEY® case
with plate in nylon
$
91,00
MONOKEY® plate M5 in nylon included
$
150,00
K 1100 RS
R 1100 GS (94 > 04)
SR694
Specific plate for MONOKEY® boxes
PL189
Tubular pannier holder for MONOKEY boxes
$
169,00
D231S
Specific screen, smoked 17.7H x 23.7W inches
$
142,00
®
R 1100 RS (94 > 98)
E183
Specific rear plate for MONOKEY® case
to fit to the original rack
$
91,00
Specific rear plate for MONOKEY® case
to fit to the original rack
$
91,00
only match the plates M2, M3, MM / is compatible with the original side
case holder
$
89,00
MONOKEY® plate M5 in nylon included
R 1100 RT (96 > 00)
E183
R 1100 S (98 > 06)
681F
Specific Monorack arms
R 1150 GS (00 > 04)
SR694
Specific plate for MONOKEY® boxes
$
150,00
PL189
Tubular pannier holder for MONOKEY® boxes
$
169,00
D233S
Specific screen, clear 19.1H x 14.4W inches
$
142,00
Complete with M5 Monokey plate / it can be mounted with the original
side-case holder / maximum load allowed 6 Kg
$
163,00
Specific rear plate for MONOKEY® case
to fit to the original rack
$
91,00
E191
Specific rear plate for MONOKEY® case
to fit to the original rack / MONOKEY® plate E250 included
$
91,00
D241ST
Specific screen, clear 18.9H x 20.1W inches
$
116,00
only match the plates M2, M3, MM / is compatible with the original side
case holder
$
89,00
it can be fit with the original side-case / maximum load allowed 6 kg / It does not
allow the assembly of the stop light kit or the remote control device on the case
$
180,00
only match the plates M2, M3, MM / is compatible with the original side
case holder
$
89,00
to fit to the original rack
$
70,00
$
206,00
R 1150 R (01 > 04)
SR683
Specific plate for MONOKEY® boxes
R 1150 RT (01)
E183
R 1150 RT (02 > 04)
K 1200 GT (03 > 04)
680F
Specific Monorack arms
K 1200 GT/ K1300 GT (06 > 12) NEW
SRA693
Specific plate in aluminium for Monokey® cases
K1200 RS (00 > 04)
680F
Specific Monorack arms
R 1200 GS ADVENTURE (06 > 12)
72
E250
Universal rear plate complete with fitting kit for MONOKEY®.
PL685
Tubular pannier holder for MONOKEY® boxes
= Item available until it runs out of stock
CODE
DESCRIPTION
NOTE
PRICE
it can be fit with the original side-case / maximum load allowed 6 kg / It does not allow the
assembly of the stop light kit or the remote control device on the case / compatible from ’07 to ’11
SRA692
Specific plate in aluminium for Monokey® cases
SR689
Specific plate for MONOKEY® boxes
SR684
Specific plate for MONOKEY boxes
PL684
Tubular pannier holder for MONOKEY® boxes
PLR684
Rapid release tubular side-case holder for MONOKEY cases
330DT
Specific screen, clear 20.3H x 22.2W inches
MONOKEY® plate M5 in nylon included / in replacement of original rack
/ is compatible with the original side case holder
to fit to the original rack / maximum load allowed 6 Kg / MONOKEY®
plate M5 in nylon included
®
®
5.7 inches higher than original / adjustable as the original
$
275,00
$
126,00
$
108,00
$
206,00
$
229,00
$
154,00
D330KIT
Specific fitting kit for 330DT
$
17,00
AF330
Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 21.3 inches (4.7 inches of extension) width 21.3 inches
$
250,00
TN689
Specific engine guard
we recommend fitting by a qualified mechanic
$
210,00
only match the plates M5, M5M / it is not compatible with the original
sidecase holder / including fixing kit
you can mount only V35 MONOKEY® SIDE CASES/ / can be mounted without the
Monorack using the PLX688KIT / it can’t be mounted with the original top case
$
95,00
$
221,00
APRILIA - BMW
CAN AM - DUCATI
R 1200 GS (04 > 12)
R 1200 R (06 > 10)
688FZ
PLX688
Specific Monorack arms
Tubular pannier holder for V35 MONOKEY® SIDE cases
PLX688KIT
Specific kit to install the PLX without the Monorack
$
40,00
147A
Specific screen, clear 19.5H x 18.1W inches
$
137,00
A147A
Specific fitting kit for 147A
$
62,00
maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included
$
160,00
you can mount only V35 MONOKEY SIDECASES
$
259,00
R 1200 R (11 > 12)
SR5100
Specific plate for MONOKEY® boxes
PLXR5100
Rapid release tubular side-case holder for MONOKEY SIDE cases
147A
Specific screen, clear 11.4H x 11.2W inches
$
137,00
A5100A
Specific fitting kit for 147A
$
75,00
TN5100
Specific engine guard
we recommend fitting by a qualified mechanic
$
200,00
MONOKEY® plate E250 included
$
98,00
®
®
R 1200 RT (05 > 12)
E193
Specific rear plate for MONOKEY® case
K 1200 S (05 > 08) / K 1300 S (09 > 12)
PLR692
Rapid release tubular side-case holder for MONOKEY® cases
$
229,00
D334S
Specific screen, smoked 16.6H x 16.7W inches
$
160,00
$
250,00
$
229,00
MONOKEY® plate M5 in nylon included / it is neccesary to puncture the
housing behind the saddle
you must move from there original position / you can mount only V35
MONOKEY® SIDE CASES SIDE V35
$
140,00
$
221,00
9.8 inches higher than original
$
140,00
K 1300 R (09 > 12)
SR690
Specific plate in aluminium for Monokey® cases
PLXR691
Rapid release tubular side-case holder for MONOKEY SIDE cases
®
it can be fit with the original side-case / maximum load allowed 6 kg / It
is not possible to mount a stop light on the case
you can mount only V35 MONOKEY® SIDECASES/ can be mounted
without the specific plate
CAN AM
SPYDER 990 (08 > 09) NEW
SR770
Specific plate for MONOKEY® boxes
PLX770
Tubular pannier holder for V35 MONOKEY SIDE cases
D770ST
Specific screen, clear 20.5H x 18.1W inches
®
THE ITALIAN SIGN OF MOTODESIGN
73
CODE
DESCRIPTION
NOTE
PRICE
APRILIA - BMW
CAN AM - DUCATI
DUCATI
MONSTER 696 / MONSTER 1100 (08 > 11)
780FZ
Specific Monorack arms
A780
Specific screen, smoked 13.4H X 15.7W inches
only match the plates M5, M5M / maximum load allowed 6 kg
$
89,00
including fixing kit
$
190,00
T681
7400KIT
Tubular side holder for soft luggage
$
125,00
Specific kit to install the TE7400 and the T681 without the Monorack
$
60,00
$
74,00
MONOKEY® plate M5 in nylon included / maximum load allowed 10 Kg
$
137,00
MONOKEY® plate M5 in nylon included / maximum load allowed 10 Kg
$
168,00
MONSTER S2R / S4R / S4RS 800 - 1000 (04 > 08)
T680
Tubular side holder for soft luggage
MULTISTRADA 620 / MULTISTRADA 1000 DS (03 > 05)
SR310
Specific plate for MONOKEY® boxes
MULTISTRADA 620 / MULTISTRADA 1100 (06 > 09)
SR311
Specific plate for MONOKEY® boxes
STREETFIGHTER 1098 (09 > 12)
T682
Tubular side holder for soft luggage
$
130,00
A781A *
Specific fitting kit for 247N
$
60,00
* you can find spoilers prices on page 45
MONSTER 1100 EVO (11 > 12) NEW
780FZ
Specific Monorack arms
A780
Specific screen, smoked 13.4H X 15.7W inches
TE7400
Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
7400KIT
Specific kit to install the TE7400 and the T681 without the Monorack
only match the plates M5, M5M / maximum load allowed 6 kg
$
89,00
including fixing kit / it is necessary to remove the small original screen
$
190,00
can be mounted without the Monorack using the 7400KIT / you must
move the indicators from their original position
$
120,00
$
60,00
MONOKEY® plate M5 in nylon included / is compatible with the original
side case holder
$
150,00
you can mount only V35 MONOKEY® SIDECASES
$
229,00
3.5 inches higher than original
$
140,00
use the plate included in the box
$
84,00
3.1 inches higher than 105A
$
116,00
MULTISTRADA 1200 (10 > 12)
SR312
Specific plate for MONOKEY® boxes
PLXR312
Rapid release tubular side-case holder for MONOKEY SIDE cases
D272ST
Specific screen, transparent 23.6H x 18.5W inches
®
HONDA
RUCKUS 50 (04 > 12)
SR28
Specific plate for MONOLOCK® boxes
128A
Specific screen, clear 29.1H x 26.4W
105A
Specific screen, clear 26H x 26.4W inches
$
84,00
A303A
Specific fitting kit for 128A and 105A
$
83,00
maximum load allowed 3 kg / use the plate included in the box / you
must puncture the housing in arranged sections
$
50,00
PCX 125 (10 > 11)
74
E231
Specific rear plate for MONOLOCK® case
D322ST
Specific screen, trasparent, 23.4H x 17.3W inches
7.3 inches higher than original
$
95,00
D322S
Specific screen, smoked, 23.4H x 17.3W inches
7.3 inches higher than original
$
99,00
$
175,00
$
12,00
323DT
Specific screen, transparent 32.2H x 22.8W inches
D323KIT
Specific fitting kit for 323DT
= Item available until it runs out of stock
7.3 inches higher than original
CODE
DESCRIPTION
NOTE
PRICE
SH 125I-150I (09 > 11)
E227
Specific rear plate for MONOLOCK® case
P205
Single tubular side-case holder
maximum load allowed 3 kg / use the plate included in the box
$
35,00
Compatible with the following Soft Bags: T467 - T457 - T450 / You have
to mount it on the right side of the scooter
$
95,00
311A
313A
Specific screen, transparent 24.8H x 27.5W inches
$
95,00
Specific screen, transparent 21.6H x 25.9W inches
$
95,00
A315A
Specific fitting kit for 311A, 313A and 311ASP
$
50,00
maximum load allowed 6 kg / use the plate included in the box
$
125,00
MONOKEY® plate M2 in aluminium included
$
146,00
$
126,00
MONOKEY® plate M5 in nylon included
$
91,00
MONOLOCK plate M5M in nylon included
$
91,00
$
109,00
CBR 250 R (11) NEW
SR1103
Specific plate for MONOLOCK® boxes
SR13
Specific plate for MONOKEY® boxes
D182S
Specific screen, smoked 23.75H x 26.2W inches
HONDA
CN 250 HELIX (89 > 00)
REFLEX 250 (01 > 08)
SR18
SR18M
Specific plate for MONOKEY® boxes
Specific plate for MONOLOCK boxes
D210ST
®
®
Specific screen, clear 25.5H x 14.3W inches
CB 599 (03 > 09)
258FZ
Specific Monorack arms
only match the plates M5, M5M
$
106,00
is mounted in conjuction with Monorack
PL172
Tubular pannier holder for MONOKEY boxes
A305
Specific screen, smoked 12.3H x 16.1W inches
$
191,00
including fixing kit / it can be installed without taking off the original light
fairing / compatible from ’05 to ’06
$
103,00
A756N902
A258A *
Specific screen with fitting kit, metal black 14.2H x 17.7W inches
compatible from ’03 to ’04
$
273,00
Specific fitting kit for 240A and 240N902
compatible from ’03 to ’04
$
48,00
only match the plates M2, M3, MM
$
95,00
MONOKEY® plate M5 in nylon included / you must puncture the original
case holder
MONOLOCK® plate M5M in nylon included / you must puncture the
original case holder
$
91,00
$
91,00
$
105,00
$
15,00
$
79,00
$
239,00
$
53,00
®
* you can find spoilers prices on page 45
CBR 600 F (97 > 98)
249F
Specific Monorack arms
SILVER WING 600 (01 > 11)
SR19
Specific plate for MONOKEY® boxes
SR19M
Specific plate for MONOLOCK boxes
214DT
Specific screen, clear 24.8H x 23.6W inches
D214KIT
Specific fitting kit for 214DT
TB19
Specific backrest
AF214
Specific sliding wind-screen, clear, complete with fitting kit. Maximum height 22.4 inches (4.7 inches of extension) width 23.2 inches
®
it can be mounted with the SR19 / SR19M
XL 600 V TRANSALP (89 > 93)
E200
Specific rear plate for MONOKEY® case
D180S
Specific screen, smoked 17.2H x 17.3W inches
TN363
Specific engine guard
$
79,00
we recommend fitting by a qualified mechanic
$
126,00
only match the plates M5, M5M / maximum load allowed 6 Kg
$
106,00
you can mount only V35 MONOKEY® SIDE CASES / is mounted in
conjuction with Monorack
$
221,00
$
140,00
$
110,00
DN-01 (08 > 12)
265FZ
Specific Monorack arms
PLX204
Tubular pannier holder for V35 MONOKEY SIDE cases
D316S
Specific screen, smoked 26H X 17.7W inches
®
NT 700 DEAUVILLE (06 > 12)
E221
Specific rear plate for MONOKEY® case
MONOKEY® plate M5 in nylon included/ for fixing the original lid must
be drilled
THE ITALIAN SIGN OF MOTODESIGN
75
CODE
DESCRIPTION
NOTE
PRICE
MONOLOCK® plate M5M in nylon included/ for fixing the original lid
must be drilled
$
110,00
E221M
Specific rear plate for MONOLOCK® case
D307ST
Specific screen, transparent 19.29H x 18.31W inches
3.54 inches higher than the original
$
100,00
Specific Monorack arms
only match the plates M2, M3, MM
$
89,00
Specific Monorack arms
only match the plates M2, M3, MM
$
78,00
257FZ
Specific Monorack arms
only match the plates M5, M5M / you must remove the grabrails, they
are reproduced by the rack itself
$
106,00
PL257
Tubular pannier holder for MONOKEY® boxes
is mounted in conjuction with Monorack
$
154,00
D200S
Specific screen, smoked 18.1H x 16.5W inches
$
120,00
$
116,00
VFR 750 F (90 > 93)
229F
VFR 750 F (94 > 97)
242F
VFR 800 (98 > 01)
HONDA
VFR 800 VTEC (02 > 11)
only match the plates M5, M5M / it is not compatible with the original
sidecase holder / reinforced version
166FZ
Specific Monorack arms
PL166
Tubular pannier holder for MONOKEY boxes
$
174,00
PLX166
Tubular pannier holder for V35 MONOKEY® SIDE cases
you can mount only V35 MONOKEY® SIDE CASES
$
189,00
PLXR166
Rapid release tubular side-case holder for MONOKEY SIDE cases
you can mount only V35 MONOKEY SIDECASES
$
229,00
D217S
Specific screen, smoked 20.5H x 16.9W inches
$
116,00
$
89,00
®
®
®
CB 919 (02 > 08)
256FZ
Specific Monorack arms
PL256
Tubular pannier holder for MONOKEY boxes
A257A *
Specific fitting kit for 240A, 240BL and 240N902
only match the plates M5, M5M
®
$
168,00
$
48,00
only match the plates M2, M3, MM
$
95,00
only with chassis N141
$
105,00
only match the plates M2, M3, MM
$
95,00
only with chassis N141
$
105,00
only match the plates M5, M5M
$
116,00
compatible from ’11
$
80,00
is mounted in conjuction with Monorack
* you can find spoilers prices on page 45
CBR 1000 F (89 > 92)
227F
Specific Monorack arms
Y155
Specific wingrack fitting kit
CBR 1000 F (93 > 00)
227F
Specific Monorack arms
Y155
Specific wingrack fitting kit
CB 1000 R (11 > 12)
266FZ
Specific Monorack arms
A1101A *
Specific fitting kit for 247A and 247N
TE1101
Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
1101KIT
Specific kit to install the TE1101 without the Monorack
can be mounted without the Monorack using the 1101KIT
$
120,00
$
70,00
* you can find spoilers prices on page 45
VTR 1000 F (97 > 04)
251F
Specific Monorack arms
only match the plates M2, M3, MM
$
89,00
Specific Monorack arms
only match the plates M2, M3, MM
$
93,00
CBR 1100 XX
248F
76
Y158
Specific wingrack fitting kit
DH196
Specific screen, smoked 16.8H x 24.4W inches
= Item available until it runs out of stock
only with chassis N140
$
115,00
$
124,00
CODE
DESCRIPTION
NOTE
PRICE
ST 1100
E190
Specific rear plate
$
80,00
D184S
Specific screen, smoked 18.3H x 15.9W inches
$
112,00
to fit to the original rack
$
87,00
only match the plates M5, M5M / A larger grab rail for the passenger is included, you must
remove the original grab rails / is compatible with the original side case holder
$
116,00
$
189,00
ST 1300 (02 > 12)
E215
Specific rear plate for MONOKEY® case
267FZ
Specific Monorack arms
PLX209
Tubular pannier holder for V35 MONOKEY SIDE cases
267KIT
Specific kit to install the PLX without the Monorack
D321S
Specific screen, smoked 15.7H x 15.7W inches
®
you can mount only V35 MONOKEY® SIDE CASES / can be mounted
without the Monorack using the 267KIT
$
90,00
5.5 inches higher than original
$
140,00
KAWASAKI - KTM
KYMCO - MOTOGUZZI
VFR 1200 F (10 > 12)
KAWASAKI
650R NINJA (05 > 08)
445FZ
Specific Monorack arms
PLX445
Tubular pannier holder for V35 MONOKEY® SIDE cases
D404S
Specific screen, smoked 23.4H x 14W inches
maximum load allowed 6 kg / only match the plate M5M
$
89,00
you can mount only V35 MONOKEY® SIDE CASES/ is mounted in
conjuction with Monorack
$
189,00
3.3 inches higher than the original / for faired version
$
158,00
you need to remove the handle bar of the scooter to install it
$
95,00
you can mount only V35 MONOKEY® SIDE CASES / original grabrails should
be removed / can be mounted without the Monorack using the PLX449KIT
$
221,00
650R NINJA / ER-6N (09 > 12)
449FZ
Specific Monorack arms
PLX449
Tubular pannier holder for V35 MONOKEY® SIDE cases
PLX449KIT
Specific kit to install the PLX without the Monorack
A448A *
Specific fitting kit for 247N
D409S
Specific screen, smoked 17.3H x 13.8W inches
TE266
Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
$
99,00
only for 6N models
$
29,00
2.4 inches higher than original / only for ER-6F
$
TBD
$
120,00
$
78,00
* you can find spoilers prices on page 45
ZX-6 (93 > 04)
423F
Specific Monorack arms
D166S
Specific screen, smoked 16.9H x 14.6W inches
$
115,00
Specific rear plate for MONOKEY® case
$
63,00
$
95,00
only match the plates M2, M3, MM
KLR 650
E127
KLR 650 (08 > 12)
E581
Specific rear plate for MONOKEY® case
E581M
Specific rear plate for MONOLOCK case
$
95,00
PL448
Tubular pannier holder for MONOKEY® boxes
$
189,00
408D
Specific screen, smoked 21.3H x 13.8W inches
$
106,00
D408KIT
Specific fitting kit for 408D
$
34,00
TN421
Specific engine guard
$
200,00
MONOKEY® plate E250 included
®
we recommend fitting by a qualified mechanic
THE ITALIAN SIGN OF MOTODESIGN
77
CODE
DESCRIPTION
NOTE
PRICE
VERSYS 650 (08 > 09)
447FZ
Specific Monorack arms
PL447
Tubular pannier holder for MONOKEY® boxes
only match the plates M5, M5M / including fixing kit
$
95,00
can be mounted without the Monorack using the PLX447KIT
$
189,00
PLX447
Tubular pannier holder for V35 MONOKEY® SIDE cases
PLX447KIT
Specific kit to install the PLX without the Monorack
$
221,00
$
27,00
D405ST
Specific screen, clear 18.1H x 17.5W inches
$
137,00
only match the plates M5, M5M
$
95,00
can be mounted without the Monorack using the 450KIT
$
229,00
you can mount only V35 MONOKEY® SIDECASES / can be mounted
without the Monorack using the 450KIT
$
229,00
$
75,00
you can mount only V35 MONOKEY® SIDE CASES / can be mounted
without the Monorack using the PLX447KIT
VERSYS 650 (10 > 12)
451FZ
Specific Monorack arms
PLR450
Rapid release tubular side-case holder for MONOKEY cases
PLXR450
Rapid release tubular side-case holder for MONOKEY SIDE cases
450KIT
Specific kit to install the PLR and the PLXR without the Monorack
®
®
D410ST
Specific screen, transparent 18.9H x 14.6W inches
TN422
Specific engine guard
8.3 inches higher than original
$
120,00
we recommend fitting by a qualified mechanic
$
200,00
Specific Monorack arms
only match the plates M2, M3, MM
$
78,00
Specific Monorack arms
only match the plates M5, M5M / maximum load allowed 6 kg
$
105,00
448FZ
Specific Monorack arms
only match the plates M5, M5M / maximum load allowed 6 Kg / you
must move from there original position
$
116,00
A446
Specific screen, smoked 13.4 H X 13.4W inches
T265
Tubular side holder for soft luggage
ZR 7 (99 > 04)
KAWASAKI - KTM
KYMCO - MOTOGUZZI
436F
Z 750 S (05 > 06)
444FZ
Z 750 (07 > 12)
TE265
Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
T265KIT
Specific fitting kit for tubular holder
including fixing kit
can be mounted without the Monorack using the T265KIT / you must
move the indicators from their original position
$
140,00
$
74,00
$
120,00
$
40,00
NINJA 1000 (11 > 12) NEW
only match the plates M5, M11, M5M / it is not compatible with the
original sidecase holder
you can mount only V35 MONOKEY® SIDECASES / can be mounted
without the Monorack using the 4100KIT
4100FZ
Specific Monorack arms
PLXR4100
Rapid release tubular side-case holder for MONOKEY® SIDE cases
4100KIT
Specific kit to install the PLXR4100 without the Monorack
4100D
Specific screen, smoked 22H x 14.57W inches
D4100KIT
Specific fitting kit for 4100D
TE4100
Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
$
120,00
only match the plates M5, M5M / maximum load allowed 6 kg
$
95,00
including fixing kit
$
140,00
only match the plates M5, M5M / maximum load allowed 6 Kg / you
must move from there original position
$
116,00
5.51 inches higher than original
$
116,00
$
229,00
$
99,00
$
140,00
$
25,00
Z 1000 (03 > 06)
442FZ
Specific Monorack arms
A446
Specific screen, smoked 13.4 H X 13.4W inches
Z 1000 (07 > 08)
448FZ
Specific Monorack arms
A447
Specific screen, smoked 13.4H X 13.4 W inches
T265
$
140,00
$
74,00
only match the plates M5, M5M / maximum load allowed 6 Kg
$
116,00
including fixing kit
$
190,00
can be mounted without the Monorack using the T267KIT
$
89,00
including fixing kit
Tubular side holder for soft luggage
Z 1000 (10 > 12)
78
450FZ
Specific Monorack arms
A449
Specific screen, smoked 16.5H x 14.2W inches
T267
Tubular side holder for soft luggage
= Item available until it runs out of stock
CODE
DESCRIPTION
T267KIT
NOTE
PRICE
$
50,00
maximum load allowed 6 Kg / only match the plates M2, M3, MM
$
89,00
for faired version
$
99,00
Specific Monorack arms
only match the plates M2, M3, MM
$
78,00
441FZ
Specific Monorack arms
only match the plates M5, M5M / you must remove the grabrails, they
are reproduced by the rack itself
$
89,00
PL441
Tubular pannier holder for MONOKEY® boxes
is mounted in conjuction with Monorack
$
183,00
Specific Monorack arms
maximum load allowed 6 Kg / only match the plates M2, M3, MM
$
89,00
433F
Specific Monorack arms
maximum load allowed 6 Kg / only match the plates M2, M3, MM
$
89,00
D174S
Specific screen, smoked 14.3H x 12.6W inches
for faired version
$
99,00
MONOKEY® plate M2 in aluminium included
$
132,00
3.3 inches higher than original
$
126,00
$
147,00
$
30,00
$
197,00
$
140,00
$
229,00
use the plate included in the box
$
50,00
MONOKEY® plate M5 in nylon included / maximum load allowed 6 kg
$
130,00
maximum load allowed 6 kg
$
70,00
Specific fitting kit for tubular holder
ZRX 1100 / ZRX 1100 S (97 > 01)
433F
Specific Monorack arms
D174S
Specific screen, smoked 14.3H x 12.6W inches
ZX-11 (93 > 01)
422F
ZZR 1200 (02 > 04)
ZRX 1200 (02)
433F
KAWASAKI - KTM
KYMCO - MOTOGUZZI
ZRX 1200 R (02)
CONCOURS 1400 (08 > 12)
SR410
Specific plate for MONOKEY® boxes
D407ST
Specific screen, clear 22.8H x 20.9W inches
ZX 14 (06 > 09)
D406S
Specific screen, smoked 17.1H x 14.6W inches
KTM
ADVENTURE 950 / 990 (03 > 09)
E650M
Specific rear plate for MONOLOCK® case
PL650
Tubular pannier holder for MONOKEY boxes
use the plate included in the box
®
990 SMT (09 > 10)
D750S
Specific screen, fumè 19.3H x 16.1W inches
PLR750
Tubular Sidecase holder for MONOKEY® cases
6.7 inches higher than original
KYMCO
AGILITY 50-125-150 (08 > 12)
E137
Specific rear plate for MONOLOCK® case
DOWNTOWN 300I (09 > 12) NEW
SR92
SR92M
Specific plate for MONOKEY® boxes
Specific plate for MONOLOCK boxes
®
THE ITALIAN SIGN OF MOTODESIGN
79
CODE
DESCRIPTION
D294ST
Specific screen, clear 32.1H x 25.2W inches
TB82
Specific backrest
NOTE
PRICE
6.1 inches higher than original
$
170,00
it cannot be mounted if rack and case are installed
$
85,00
Specific plate
$
84,00
102A
Specific screen, clear 26H x 26.8W inches
$
95,00
128A
Specific screen, clear 29.1H x 26.4W inches
$
116,00
B&W 150 (00 > 06)
SR82
* IN ORDER TO FIT THE MONOLOCK® BOXES USE THE PLATE INCLUDED; TO FIT THE MONOKEY® CASES USE THE E250 PLATE (WHICH IS SOLD SEPARATELY)
GRAND VISTA 250 (00 > 07)
290DT
Specific screen, clear 23.9H x 27.6W inches
$
130,00
D290KIT
Specific fitting kit for 290DT
$
18,00
XCITING 500 (05 > 12)
KAWASAKI - KTM
KYMCO - MOTOGUZZI
SR89
Specific plate for MONOKEY® boxes
SR89M
Specific plate for MONOLOCK® boxes
D293ST
Specific screen, clear 34.3H x 25.2W inches
TB80
Specific backrest
MONOKEY® plate M5 in nylon included
$
116,00
use the plate included in the box
$
103,00
$
158,00
it cannot be mounted if rack and case are installed
$
79,00
is compatible with the original side case holder / only match the plates
M2, M3, MM
$
89,00
is compatible with the original side case holder / MONOKEY® plate M5
in nylon included
is compatible with the original side case holder / MONOLOCK® plate
M5M in nylon included
$
109,00
$
109,00
is compatible with the original side case holder / MONOKEY® plate M5
in nylon included
is compatible with the original side case holder / MONOLOCK® plate
M5M in nylon included
$
109,00
$
109,00
MONOKEY® plate M5 in nylon included
$
110,00
MONOLOCK plate M5M in nylon included
$
110,00
5.1 inches higher than original
$
150,00
MOTO GUZZI
BREVA 750 (03 > 12)
703F
Specific Monorack arms
BREVA 1100 (05 > 12)
SR210
Specific plate for MONOKEY® boxes
SR210M
Specific plate for MONOLOCK® boxes
NORGE 1200 (06 > 12)
SR210
Specific plate for MONOKEY® boxes
SR210M
Specific plate for MONOLOCK boxes
®
STELVIO 1200 (08 > 12)
80
E708
Specific rear plate for MONOKEY® case
E708M
Specific rear plate for MONOLOCK case
D610ST
Specific screen, clear 24H x 18.1W inches
®
= Item available until it runs out of stock
®
CODE
DESCRIPTION
NOTE
PRICE
PIAGGIO
FLY 50-125 (04 > 11)
SR104
Specific plate for MONOLOCK® boxes
$
121,00
107A
Specific screen, clear 20H x 26W inches
$
100,00
A110A
Specific fitting kit for 107A
$
57,00
maximum load allowed 6 Kg / use the plate included in the box
VESPA LX (05 > 11)
SR105
Specific plate for MONOLOCK® boxes
$
158,00
104A
Specific screen, clear 20.3H x 27.4W inches
$
105,00
A104A
Specific fitting kit for 104A
$
52,00
maximum load allowed 6 kg
only for ’04 version
maximum load allowed 6 kg
compatible from model ’05
only for ’04 version
only available if article A108A is already fitted
3.1 inches higher than 105A / only for ’04 version
only available if article A108A is already fitted
compatible from model ’05
only available if articles 113A, 1134AS, 113ASP are already fitted
$
42,00
$
55,00
$
84,00
$
116,00
$
52,00
$
240,00
$
220,00
$
179,00
$
179,00
$
179,00
use the plate included in the box
BEVERLY (BV) 250-300 (04 > 112)
E341
Specific rear plate for MONOLOCK® case
E344
Specific rear plate for MONOLOCK case
105A
Specific screen, clear 26H x 26.4W inches
128A
Specific screen, clear 29.1H x 26.4W inches
A350A
®
Specific fitting kit for 113A, 113AS and 114AS
SR134
“Folding” specific plate for MONOKEY® boxes
SR134M
“Folding” specific plate for MONOLOCK boxes
SR108
Specific plate for MONOKEY® boxes
SR108M
Specific plate for MONOLOCK boxes
D501ST
Specific screen, clear 32.3H x 25.2W inches
MONOKEY® plate M5 in nylon included / complete with polyurethane
backrest / Allows hardware to be raised in order to fully open the rear trunk.
MONOLOCK® plate M5M in nylon included / complete with polyurethane
backrest / Allows hardware to be raised in order to fully open the rear trunk.
complete with polyurethane backrest / MONOKEY® plate M5 in nylon / in order to
fix you must remove the original backrest / maximum load allowed 3 kg
complete with polyurethane backrest / MONOLOCK® plate M5M in nylon / in order
to fix you must remove the original backrest / maximum load allowed 3 kg
15.7 inches higher than original (06-08 Model) / 9.4 inches higher than
original (09 Model)
D504ST
Specific screen, clear 29.1H x 25.2W inches
23.6 inches higher than original
$
179,00
AF504
Specific sliding wind-screen, clear, complete with fitting kit. Maximum height 29.1 inches (4.7 inches of extension) width 25.2 inches
$
239,00
TB106
Specific backrest
$
132,00
®
®
it cannot be mounted if rack and case are installed
PIAGGIO - SUZUKI
MP3 250-400 (06 > 11)
VESPA GTS 250 (06 > 11)
104A
Specific screen, clear 20.3H x 27.4W inches
$
105,00
A104A
Specific fitting kit for 104A
$
52,00
VESPA GTS 300 SUPER (11 > 12) NEW
SR131
Specific plate for MONOLOCK® boxes, chromed
$
195,00
104A
Specific screen, clear 20.3H x 27.4W inches
$
105,00
A104A
Specific fitting kit for 104A
$
52,00
use the plate included in the box
BEVERLY (BV) 500 (03 > 12)
E341
Specific rear plate for MONOLOCK® case
maximum load allowed 6 kg / compatible with ’03 and ’04
$
42,00
E344
Specific rear plate for MONOLOCK case
maximum load allowed 6 kg / compatible from ’05
$
55,00
®
103A
Specific screen, clear 17.1H x 27.6W inches
$
103,00
A103A
Specific fitting kit for 103A
$
59,00
106A
Specific screen, clear 12.6H x 24.2W inches
$
89,00
A106A
Specific fitting kit for 106A
$
54,00
MONOKEY® plate M3 in nylon included
$
141,00
MONOLOCK® plate MM in nylon included
$
141,00
$
104,00
X9 500 (05 > 08)
SR54
Specific plate for MONOKEY® boxes
SR54M
Specific plate for MONOLOCK® boxes
TB54
Specific backrest
THE ITALIAN SIGN OF MOTODESIGN
81
CODE
DESCRIPTION
NOTE
PRICE
SUZUKI
AN 400 BURGMAN TYPE-S (05 > 06)
E530M
Specific rear plate for MONOLOCK® case
D258ST
Specific screen, clear 31.5H x 28W inches
MONOLOCK® plate M5M in nylon included / it is neccesary to puncture
the housing behind the saddle / maximum load allowed 6Kg
$
103,00
$
160,00
$
108,00
AN 400 BURGMAN (03 > 12)
SR115
Specific plate for MONOKEY® cases
MONOKEY® plate M5 in nylon included
SR115M
Specific plate for MONOKEY cases
MONOKEY plate M5 in nylon included / you must remove the grabrails,
they are reproduced by the rack itself / maximum load allowed 6 kg
D258ST
Specific screen, clear 31.5H x 28W inches
®
®
$
108,00
$
160,00
$
111,00
$
111,00
AN 400 BURGMAN (07 > 09)
E531
Specific rear plate for MONOKEY® case
E531M
Specific rear plate for MONOLOCK® case
MONOKEY® plate M5 in nylon included/ it is neccesary to puncture the
housing behind the saddle
MONOLOCK® plate M5M in nylon included/ it is neccesary to puncture
the housing behind the saddle
266DT
Specific screen, clear 33.1H x 26.8W inches
$
154,00
D266KIT
Specific fitting kit for 266DT
$
25,00
TB531
Specific backrest
it can be mounted with E531M
$
74,00
Specific Monorack arms
only match the plates M2, M3, MM
$
89,00
Specific Monorack arms
only match the plates M2, M3, MM
$
89,00
only match the plates M2, M3, MM
$
89,00
only match the plates M2, M3, MM
$
89,00
GS 500 E (97 > 00)
524F
GS 500 E (01 > 04)
526F
PIAGGIO - SUZUKI
GSF 600 BANDIT (96 > 99)
511F
Specific Monorack arms
GSF 600 BANDIT (00 > 04)
522F
Specific Monorack arms
PL522
Tubular pannier holder for MONOKEY boxes
D252S
Specific screen, smoked 17.6H x 15.6W inches
$
208,00
only for faired version
$
107,00
only match the plates M5, M5M
$
89,00
the rack cannot be mounted in conjunction with the TB529 / MONOKEY®
plate M5 in nylon / in order to fix you must remove the original backrest
the rack cannot be mounted in conjunction with the TB529 / MONOLOCK®
plate M5M in nylon / in order to fix you must remove the original backrest
$
99,00
$
99,00
®
GSX 600 KATANA (03 > 06)
530FZ
Specific Monorack arms
BURGMAN 650 / BURGMAN 650 EXECUTIVE (02 > 12)
E529
Specific rear plate for MONOKEY® case
E529M
Specific rear plate for MONOLOCK® case
D257ST
Specific screen, clear 31.5H x 28.3W inches
compatible with all years ’04
$
153,00
D263ST
Specific screen, clear 30.9H x 28.3W inches
for models having electrically adjustable screen / compatable from ’05
$
163,00
$
91,00
DL 650 V-STROM (04 > 11)
82
E528
Specific rear plate for MONOKEY® case
MONOKEY® plate E250 included
to be mounted using original bolts
PL532
Tubular pannier holder for MONOKEY boxes
PLR532
Rapid release tubular side-case holder for MONOKEY® cases
PLX532
Tubular pannier holder for V35 MONOKEY SIDE cases
D260ST
Specific screen, clear 22.4H x 18.9W inches
AF260
TN532
$
171,00
$
229,00
you can mount only V35 MONOKEY SIDE CASES
$
189,00
7.09 inches higher than the original
$
125,00
Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 25.6 inches (4.7 inches of extension) width 17.3 inches
$
250,00
Specific engine guard
$
171,00
®
®
= Item available until it runs out of stock
®
we recommend fitting by a qualified mechanic
CODE
DESCRIPTION
NOTE
PRICE
DL 650 V-STROM L2 (12)
SR3101
Specific plate for MONOKEY® boxes
SR3101M
Specific plate for MONOLOCK® boxes
SRA3101
Specific plate in aluminium for Monokey cases, black
PL3101
Tubular pannier holder for MONOKEY® boxes
®
MONOKEY® plate E250 in nylon included
$
110,00
maximum load allowed 3 kg / use the plate included in the box
$
75,00
It does not allow the assembly of the stop light kit or the remote control
device on the case
$
150,00
$
199,00
$
239,00
$
199,00
PLR3101
Rapid release tubular side-case holder for MONOKEY cases
PLX3101
Tubular pannier holder for V35 MONOKEY® SIDE cases
AF3101
Specific sliding wind-screen, clear, complete with fitting kit. Maximum height inches (4.7 inches of extension) width 16.9 inches
$
225,00
3101DT
Specific screen, clear 20.5H x 18.1W inches
$
140,00
D3101KIT
Specific fitting kit for 3101DT
TN532
Specific engine guard
®
you can mount only V35 MONOKEY® SIDE CASES
$
15,00
we recommend fitting by a qualified mechanic
$
171,00
MONOKEY® plate M5 in nylon included / you must remove the grabrails,
they are reproduced by the rack itself / maximum load allowed 6 kg
MONOLOCK® plate M5M in nylon included / you must remove the grabrails,
they are reproduced by the rack itself / maximum load allowed 6 kg
$
120,00
$
120,00
you can mount only V35 MONOKEY® SIDE CASES
$
221,00
GLADIUS 650 (09 > 12)
SR121
Specific plate for MONOKEY® boxes
SR121M
Specific plate for MONOLOCK boxes
PLX540
Tubular pannier holder for V35 MONOKEY® SIDE cases
®
GSX 650F (08 > 12)
539FZ
Specific Monorack arms
PL539
Tubular pannier holder for MONOKEY® boxes
PLX539
Tubular pannier holder for V35 MONOKEY® SIDE cases
D270S
Specific screen, smoked 23.5H x 16.5W inches
only match the plates M5, M5M
$
95,00
you must move the indicators from their original position
$
189,00
you can mount only V35 MONOKEY® SIDE CASES / you must move
the indicators from their original position
$
231,00
$
120,00
only match the plate M35
$
89,00
only match the plates M5, M5M
$
95,00
MONOKEY® plate E250 included
$
91,00
521FL
Specific Monorack arms
PIAGGIO - SUZUKI
SV 650 / SV 650 S (99 > 02)
SV 650 / SV 650 S (03 > 08)
529FZ
Specific Monorack arms
DL 1000 V-STROM (02 > 12)
E528
Specific rear plate for MONOKEY® case
PL528
Tubular pannier holder for MONOKEY boxes
PLX528
Tubular pannier holder for V35 MONOKEY SIDE cases
$
208,00
you can mount only V35 MONOKEY® SIDE CASES
$
189,00
only with spoiler / 6.3 inches higher than original / compatible from
’02 to ’03
7.09 inches higher than original / only with spoiler / compatible for all
years ’04
$
103,00
®
®
D255ST
Specific screen, clear 23.6H x 14.8W inches
D260ST
Specific screen, clear 22.4H x 18.9W inches
$
125,00
AF260
Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 25.6 inches (4.7 inches of extension) width 17.3 inches
$
250,00
TN528
Specific engine guard
we recommend fitting by a qualified mechanic
$
153,00
only match the plates M5, M5M
$
95,00
only match the plates M2, M3, MM
$
89,00
only match the plates M2, M3, MM
$
89,00
You must move from there original position
$
208,00
only for faired version
$
107,00
we recommend fitting by a qualified mechanic
$
163,00
SV 1000 / SV 1000 S (03 > 08)
529FZ
Specific Monorack arms
GSF 1200 BANDIT (96 > 99)
511F
Specific Monorack arms
GSF 1200 BANDIT / BANDIT S (00 > 05)
522F
Specific Monorack arms
PL523
Tubular pannier holder for MONOKEY® boxes
D252S
TN393
Specific screen, smoked 17.6H x 15.6W inches
Specific engine guard
THE ITALIAN SIGN OF MOTODESIGN
83
CODE
DESCRIPTION
NOTE
PRICE
GSF 1250 BANDIT (07 > 12)
539FZ
Specific Monorack arms
PL539
Tubular pannier holder for MONOKEY® boxes
PLX539
Tubular pannier holder for V35 MONOKEY® SIDE cases
D262S
Specific screen, smoked 18H x 14.4W inches
only match the plates M5, M5M
$
95,00
you must move the indicators from their original position
$
189,00
you can mount only V35 MONOKEY® SIDE CASES / you must move
the indicators from their original position
$
231,00
$
137,00
$
95,00
GSX 1300 HAYABUSA (08 > 10)
541FZ
only match the plates M5, M5M / A larger grab rail for the passenger is included,
you must remove the original grab rails / maximum load allowed 6 Kg
Specific Monorack arms
SYM
FIDDLE II 50-125 (09 > 10)
293A
Specific screen, transparent, 19.7H x 24.8W inches
$
95,00
A293A
Specific fitting kit for 293A
$
49,00
MONOKEY® plate M5 in nylon included / you must puncture the housing
in arranged sections
you must puncture the housing in arranged sections / use the plate
included in the box
$
160,00
$
120,00
CITYCOM 300 (08 > 09) NEW
SR231
Specific plate for MONOKEY® boxes
SR231M
Specific plate for MONOLOCK® boxes
D650ST
Specific screen, clear 25.2H x 21.7W inches
TB231
Specific backrest
7.5 inches higher than original
$
120,00
it cannot be mounted if rack and case are installed / you must puncture
the housing in arranged sections
$
105,00
maximum load allowed 6 kg / use the plate included in the box
$
120,00
only match the plates M5, M5M
$
89,00
we recommend fitting by a qualified mechanic
$
190,00
SYM - TRIUMPH
JOYMAX EVO 300 (09)
SR232
Specific plate for MONOLOCK® boxes
TRIUMPH
STREET TRIPLE 675 (07 > 12)
727FZ
Specific Monorack arms
TN226
Specific engine guard
TE705
Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
$
120,00
Specific plate for MONOLOCK® boxes
$
250,00
$
250,00
$
229,00
$
140,00
$
40,00
BONNEVILLE 865
SR226
In order to fit the Monolock® boxes use the plate included; to fit the Monokey® cases use the E250 plate (which is sold separately)
TIGER 800 / TIGER 800 XC (11 > 12)
84
maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the
remote control device on the case / you must puncture the housing in arranged sections
SRA6401
Specific plate in aluminium for Monokey® cases
PLR6401
Rapid release tubular side-case holder for MONOKEY cases
6401DT
Specific screen, clear 20.86H x 18.30W inches
D6401KIT
Specific fitting kit for 6401DT
AF6401
Specific sliding wind-screen clear, complete with fitting kit. Maximum height 23.8 (4.7 inches extension) width 17.9 inches
$
250,00
TN6401
Specific engine guard
$
189,00
®
= Item available until it runs out of stock
6.7 inches higher than original
we recommend fitting by a qualified mechanic
CODE
DESCRIPTION
NOTE
PRICE
TIGER 955 (00 > 01)
E250
D222S
$
70,00
$
92,00
MONOKEY® plate M5 in nylon included / maximum load allowed 6 Kg /
it is not compatible with the original sidecase holder
$
126,00
is mounted in conjuction with Monorack
$
179,00
4.9 inches higher than the original
$
126,00
$
50,00
can be mounted without the SR225 using the T700KIT
$
115,00
we recommend fitting by a qualified mechanic
$
189,00
only match the plates M5, M5M
$
89,00
4.7 inches higher than original
$
105,00
$
57,00
for models from ’08
$
110,00
MONOKEY® plate M5 in nylon included
$
108,00
MONOLOCK® plate M5M in nylon included
$
108,00
Universal rear plate complete with fitting kit for MONOKEY®.
to fit to the original rack
Specific screen, smoked 13.75H x 12.1W inches
TIGER 1050 (07 > 12)
SR225
Specific plate for MONOKEY® boxes
PL727
Tubular pannier holder for MONOKEY® boxes
D225ST
Specific screen, clear 19.9H x 19.4W inches
T700KIT
Specific kit to install the T704 without the plate
T704
Tubular side holder for soft luggage
TN225
Specific engine guard
ST 1050 SPRINT (05 > 12)
726FZ
Specific Monorack arms
D224S
Specific screen, smoked 19.5H x 15.4W
SPEED TRIPLE 1050 (05 > 09)
A220A *
T702
Specific fitting kit for 245A, 245N, 246G730 and 246N902
Tubular side holder for soft luggage
* you can find spoilers prices on page 45
YAMAHA
E331
Specific rear plate for MONOKEY® case
E331M
Specific rear plate for MONOLOCK® case
D137ST
Specific screen, clear 29.75H x 24.5W inches
1.6 inches higher than original
$
159,00
TB47
Specific backrest
it can be mounted only if rack and case are installed
$
69,00
Specific backrest
it cannot be mounted if rack and case are installed / compatible from
’04 to ’06
$
69,00
maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included / it
is neccesary to puncture the housing behind the saddle
maximum load allowed 6 kg / MONOLOCK® plate M5M in nylon
included / it is neccesary to puncture the housing behind the saddle
$
180,00
$
180,00
$
160,00
$
160,00
$
155,00
$
175,00
$
269,00
$
110,00
$
100,00
TB48
SYM - TRIUMPH
MAJESTY 400 (04 > 12)
T-MAX 500 (08 > 11)
SR364
Specific plate for MONOKEY® boxes
SR364M
Specific plate for MONOLOCK® boxes
SR369
Specific plate for MONOKEY boxes
SR369M
Specific plate for MONOLOCK® boxes
D442B
Specific screen, black 23.23H x 17.72W inches
D442ST
Specific screen, clear 19.7H x 22.44W inches
AF442
Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 35.4 inches (4.7 inches of extension) width 22.8 inches
TB53
Specific backrest
T273
Tubular side holder for soft luggage
®
Can not be mounted with art. TB52 or T273 / MONOKEY® plate M5 in nylon included / maximum load
allowed 5 Kg / It is necessary to drill the tail fairing of the scooter in the indicated points to mount it
MONOLOCK® plate M5M in nylon included / it is necessary to drill the tail fairing of the scooter in the
indicated points to mount it / maximum load allowed 5 Kg / Can not be mounted with art. TB52 or T273
6.30 inches higher than the original
it cannot be mounted if rack and case are installed / you must puncture
the housing in arranged sections
FZ-6 (04 > 06)
351FZ
Specific Monorack arms
PL351
Tubular pannier holder for MONOKEY® boxes
PLX351
Tubular pannier holder for V35 MONOKEY® SIDE cases
351KIT
Specific kit to install the PL351 and T351 without the Monorack
only match the plates M5, M5M
$
95,00
can be mounted without the Monorack using the 351KIT
$
179,00
you can mount only V35 MONOKEY® SIDE CASES / is mounted in
conjuction with Monorack
$
189,00
$
37,00
THE ITALIAN SIGN OF MOTODESIGN
85
CODE
DESCRIPTION
D136ST
Specific screen, clear 24H x 21.1W inches
TN358
Specific engine guard
TE351
Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
NOTE
PRICE
4.9 inches higher than original
$
131,00
we recommend fitting by a qualified mechanic / mount with central
tripod mounted
$
174,00
can be mounted without the Monorack using the 351KIT
$
120,00
only match the plates M5, M5M
$
95,00
can be mounted without the Monorack using the 351KIT
$
189,00
FZ-6 (07 > 10)
351FZ
Specific Monorack arms
PL360
Tubular pannier holder for MONOKEY® boxes
PLX360
Tubular pannier holder for V35 MONOKEY® SIDE cases
351KIT
Specific kit to install the PL360 and T351 without the Monorack
440D
Specific screen, clear 22.44H x 22.44W inches
D440KIT
Specific fitting kit for 440D
A284A *
Specific fitting kit for 245A, 245N, 246_ _ _
you can mount only V35 MONOKEY® SIDE CASES / can be mounted
without the Monorack using the 351KIT
$
189,00
$
37,00
7.48 inches higher than the original / for faired version
$
149,00
for faired version
$
21,00
not for faired version
$
65,00
we recommend fitting by a qualified mechanic / mount with central
tripod mounted
TN358
Specific engine guard
351KIT
Specific kit to install the PL360, PLX360, TE351 without the Monorack
TE351
Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
$
174,00
$
37,00
can be mounted without the Monorack using the 351KIT
$
120,00
* you can find spoilers prices on page 45
FZ-6R (09 > 12)
364FZ
Specific Monorack arms
PLXR364
Rapid release tubular side-case holder for MONOKEY® SIDE cases
only match the plates M5, M5M
$
95,00
you can mount only V35 MONOKEY® SIDECASES
$
229,00
only with spoiler
$
112,00
only match the plates M5, M5M / maximum load allowed 6 Kg
$
106,00
you can mount only V35 MONOKEY® SIDECASES / can be mounted
without the Monorack using the 366KIT
$
229,00
YZF 600 R6 (03 > 05)
D135S
Specific screen, clear 16.9H x 14.6W inches
FZ-8 (11 > 12)
366FZ
Specific Monorack arms
PLXR366
Rapid release tubular side-case holder for MONOKEY® SIDE cases
TE366
Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
366KIT
Specific kit to install the PLXR366 without the Monorack
can be mounted without the 366FZ Monorack using the 366KIT
$
120,00
$
40,00
A287
Specific screen, smoked 11H x 11.8W inches
including fixing kit / not for faired version
$
160,00
A287N
Specific screen, black 11H x 11.8W inches
including fixing kit / not for faired version
$
180,00
TN352
Specific engine guard
we recommend fitting by a qualified mechanic
$
160,00
only match the plates M5, M5M
$
89,00
$
102,00
YAMAHA
FZ-1 (01 > 02)
348FZ
Specific Monorack arms
D129S
Specific screen, smoked 16.9H x 13W inches
FZ-1 (03 > 05)
348FZ
Specific Monorack arms
PL349
Tubular pannier holder for MONOKEY® boxes
D129S
Specific screen, smoked 16.9H x 13W inches
only match the plates M5, M5M
$
89,00
you can only mount MONOKEY® E21 CRUISER cases / is mounted in
conjuction with Monorack
$
185,00
$
102,00
$
106,00
$
215,00
FZ-1 (06 > 12)
86
we recommend mounting smaller cases MONOLOCK® in conjunction with M5M
plate / It requires fitment of cases up to 35 ltr / maximum load allowed 6 kg
365FZ
Specific Monorack arms
PLX359
Tubular pannier holder for V35 MONOKEY SIDE cases
PLXR359
Tubular pannier holder for V35 MONOKEY SIDE cases
365KIT
Specific kit to install the PLX and the PLXR without the Monorack
®
®
TN357
Specific engine guard
A282A *
Specific fitting kit for 245A, 245N and 246_ _ _
= Item available until it runs out of stock
you can mount only V35 MONOKEY® SIDECASES / you must move the indicators from
their original position / can be mounted without the Monorack using the 365KIT
you must move the indicators from their original position / you can mount only V35 MONOKEY®
SIDECASES® SIDE V35 / can be mounted without the Monorack using the 365KIT
we recommend fitting by a qualified mechanic
$
229,00
$
30,00
$
195,00
$
57,00
CODE
T271
DESCRIPTION
NOTE
Tubular side holder for soft luggage
PRICE
can be mounted without Monorack
$
69,00
$
132,00
* you can find spoilers prices on page 45
V-MAX 1200
A123
Specific screen, smoked 12.25H x 11.6W inches
XTZ 1200 (10 > 12)
SR371
Specific plate for MONOKEY® boxes
PLR367
Rapid release tubular side-case holder for MONOKEY® cases
D447ST
Specific screen, clear 22.4H x 17.3W inches
AF447
TN355
MONOKEY® plate M5 in nylon included / is compatible with the original side case holder /
to open the original side -cases you ought to remove the back top case from the plate
$
115,00
$
229,00
$
150,00
Specific sliding wind-screen, clear, complete with fitting kit. Maximum height 24 inches (4.7 inches of extension), width 16.9 inches
$
250,00
Specific engine guard
we recommend fitting by a qualified mechanic
$
160,00
5.1 inches higher than the original
FJR 1300 (01 > 05)
SR346
Specific plate for MONOKEY® boxes
is compatible with the original side case holder / MONOKEY® plate M5
in nylon included
$
163,00
D134ST
Specific screen, clear 18.5H x 20.1W
2 inches higher than the original
$
103,00
FJR 1300 (06 > 12)
SR357
Specific plate for MONOKEY® boxes
D436ST
Specific screen, clear 20.5H x 19.5W inches
E228
Specific rear plate for MONOKEY case
E228M
Specific rear plate for MONOLOCK case
®
150,00
$
126,00
Maximum load 6 Kg. / Complete with M5 Monokey plate
$
110,00
Maximum load 6 Kg. / Complete with M5M Monolock plate
$
110,00
YAMAHA
®
$
2 inches higher than the original
THE ITALIAN SIGN OF MOTODESIGN
87
V35 / V35 TECH
1
Z1462R
Elastic belt
$
13,50
16
Z721R
Pin. D. 04x85 mm
$
2,50
4
Z637R
Pin. D. 04x75 mm, (1 piece)
$
2,00
18
Z644R
Opening push button, 1 pcs. (for top case V46)
$
4,50
Z115R
2
Z769
5
Z1424R
6
Z1426R
7
9
10
11
12
13
14
SPARE PARTS
15
88
Z109
Z1404R
Z106
Z1405R
Z645R
Z661
Z641NR
Stop bag opening yarn, 2 pcs.
Black lock lining
Top case reflector (right and left)
Low cover (right and left)
Long bolt springs
Push button guide 1pcs.
Bolt
Right and left visor mechanism
Push button red, 1 pcs.
Key for case lock
Hinge black
= Item available until it runs out of stock
$
$
3,00
7,50
$
10,00
$
1,50
$
$
30,00
3,00
$
10,00
$
4,00
$
$
$
3,00
10,00
13,00
17
19
20
21
22
23
Z1384R
Z640R
Z647R
Z643R
Z632R
Z409R
Z35FNMDX
Z35FNMSX
Z35CNMDX
Z35CNMSX
Z641NM2
Cylinder spring and steek spheres, 1 kit
Plate below lock, 1 pcs.
Torsion spring, 1 pcs.
Lock set element red, 1 pcs.
Steel torsion spring
Name holder, 1 pcs.
Right bottom-shell (mounted)
Left bottom-shell (mounted)
Right top-shell (mounted)
Left top-shell (mounted)
Lock set (for top case V46)
$
$
$
$
$
$
2,00
4,00
2,00
4,50
1,50
2,50
$
180,00
$
100,00
$
$
$
180,00
100,00
30,00
TRK33N / TRK46N TREKKER
Z2073CNM
TRK33N / TRK46N top-shell
$
275,00
15
Z409R
Name holder, 1 pcs.
$
2,50
Z2062FNM
TRK33N bottom-shell black
$
120,00
17
Z632R
Steel torsion spring
$
1,50
Z641N46M
6
7
8
9
10
11
13
Z641N33M
Z2063R
$
TRK46N bottom-shell black
$
Hinge stop (for top case TRK46N)
Hinge stop (for top case TRK33N)
Black metal plate cover/cap and open lids
$
$
130,00
35,00
16
35,00
19
21
35,00
20
Z2070OXR
Alluminium cover with anodizing cover/cap and open lids
$
250,00
Z109
Bolt spring
$
1,50
23
4,00
25
Z2067R
Z106
Z645CR
Z115R
Double anchor with black washer
Case clamp attachment
Push button red, 1 pcs.
Stop cords (sold as pair).
$
8,00
$
10,00
$
3,00
$
24
Z630
Z590R
Z640R
Z643NR
Z644NR
Z647R
Z648
Z721R
Z661A
Steel spheres D. 6
Pin. Medium, 2 pcs.
Lock latch
Lock set element black
Opening push button
Torsion spring, 1 pcs.
Cylinder spring
Pin. D. 04x85 mm
Key for case lock
THE ITALIAN SIGN OF MOTODESIGN
$
$
$
$
$
$
$
$
$
1,50
2,00
4,00
4,50
4,50
2,00
1,50
2,50
10,00
89
SPARE PARTS
Z2061FNM
E55 MAXIA 3 / E55 MAXIA 3 TECH
1
Z55CNM
E55 Top Shell Black
$
180,00
10
Z1684R
Pair of opening hinges
3
Z398NMR
Hinge stop (for top case E55 MAXIA 3)
$
65,00
12
Z692R
Replacement back band (for top case E55 MAXIA 3) $
$
12,00
4
5
6
SPARE PARTS
7
8
8
9
9
90
Z55CNTM
Z398NTMR
Z677R
Z590R
Z285
ZV55R
Z696R
Z696FR
Z694R
Z694FR
E55NT Top Shell Black
Hinge stop (for top case E55NT TECH)
Latch System Cover
Pin. Medium, 2 pcs.
Inner strap
Adhesive Givi Logo
Pair of side reflectors (for top case E55 MAXIA 3)
Pair of side reflectors (for top case E55NT TECH)
Central reflector (for top case E55 MAXIA 3)
Central reflector (for top case E55NT TECH)
= Item available until it runs out of stock
$
$
$
TBD
65,00
2,00
$
12,00
$
45,00
$
22,00
$
$
$
4,00
45,00
22,00
11
12
13
13
14
15
16
16
17
Z160
Z692N902R
Z693R
Z693N902R
Z1908R
Z1782R
Z206R
Z206NR
Z661
Z661A
$
9,00
$
13,00
Replacement back band (for top case E55NT TECH) $
26,00
Inner document holder
Pair of side bands (for top case E55 MAXIA 3)
$
Trim
$
Pair of side bands (for top case E55NT TECH)
Bolt + Bolt Springs
Button + Button Spring (for top case E55 MAXIA 3)
Button + Button Spring (for top case E55NT TECH)
Replacement key
$
$
$
$
$
Replacement key, silver (for top case E55NT TECH) $
24,00
70,00
70,00
6,00
7,00
4,00
4,00
10,00
10,00
E52 MAXIA
Z52CNM
E52 top-shell, black
$
3
Z106
Bolt
$
2
4
5
6
9
10
11
11
12
13
14
15
16
17
18
19
21
22
Z52FNM
Z109
Z115R
Z159R
Z1237
Z590R
Z206
Z218N
Z218VS
Z223
Z276
Z286
Z339
Z633
Z684C
Z129
Z338
Z682N
Z661
Z229
E52 bottom-shell, black
Long bolt springs
Stop bag opening yarn, 2 pcs.
Bag lock lining, 1 pcs.
Push button spring with washer
Pin. Medium, 2 pcs.
Push button PRESS
Black rear bend
Grey rear bend
Red reflector
Name holder
Glass for small name plate
Red pulley
Spare elastic belt
Satined trim (5 pcs.)
MAXIA sticker (on top-shell)
Pass belt clip
Lock set
Key for case lock
Chromed GIVI brand
89,00
23
Z234A
Acetalic latch (A)
$
3,00
10,00
25
Z297
Pin 140 mm
$
2,50
$
120,00
$
1,50
$
$
$
$
$
3,00
3,00
2,00
2,00
4,00
$
16,00
$
16,00
$
$
$
$
$
14,00
2,00
2,50
1,00
11,00
$
38,00
$
2,00
$
4,00
$
46,00
$
4,00
$
10,00
24
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
Z234B
Z367N
Z368N
Z611
Z612N
Z616KIT
Z617
Z626
Z628
Z630
Z631
Z632R
Z634
Z721R
Z195
Z723
Z613N
Z133
Z134
Acetalic latch (B)
Black handle
Bottom black hinge with serigraphy
Black nylon button
Black nylon rod
Reflecting red plate
Upper reflecting red plate
Withe screen for central handle
Black lock plate
Steel spheres D. 6
Zinc-plated cylindric steel spring
Steel torsion spring
Steel spring for rod
Pin. D. 04x85 mm
Pin D. 04x80 mm
Pin. D. 04x23 mm
Upper part lock set, black
Steel sliding plate
Handle plate
THE ITALIAN SIGN OF MOTODESIGN
$
$
3,00
8,00
$
10,00
$
2,50
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
2,00
2,00
4,00
7,00
4,00
1,50
1,50
1,50
2,00
2,50
2,00
2,50
5,00
5,00
10,00
91
SPARE PARTS
1
V46 / V46 TECH
1
Z46CNM
V46 top-shell with cover, black
$
3
Z106
Bolt
$
Z46FNM
2
Z109
4
Z229
7
Z285
8
9
Z645R
Long bolt springs
Chromed GIVI brand
Inner strap
Nylon stop bag opening yarn
12
Z732TR
13
Z734SET
14
Z737N
Push button red, 1 pcs.
Top case reflector (right and left, for top-case
Monokey® V46)
Top case reflector (right and left, for top-case
Monokey® V46NT TECH)
Central top case reflector (for top-case Monokey®
V46)
Central top case reflector (for top-case Monokey®
V46NT TECH)
Central bend, rear bend and bend right and left, ABS
silver A900
Black handle
17
ZV45
V35/V46 logo
10
11
Z731
11
Z731TR
12
15
SPARE PARTS
92
Z599
V46 bottom-shell, black
Z732KIT
Z741
Hook for fixing the document holder
= Item available until it runs out of stock
110,00
18
$
154,00
$
1,50
19
$
12,00
21
$
4,00
$
$
10,00
4,00
1,50
20
22
23
$
14,00
24
$
14,00
26
$
6,00
$
6,00
$
37,00
$
3,00
$
4,00
$
4,00
25
Z769
Black lock lining
$
Z641NTM
Lock set (for top case V46NT TECH)
$
Z641NM2
Z409R
Z630
Z632R
Z637R
Z640R
Z641NR
Z643R
Z644R
Lock set (for top case V46)
Name holder, 1 pcs.
Steel spheres D. 6
Steel torsion spring
Pin. D. 04x75 mm, (1 piece)
Plate below lock, 1 pcs.
Hinge black
Lock set element red, 1 pcs.
26
Z645CR
27
Z647R
Opening push button, 1 pcs. (for top case V46)
Opening push button, 1 pcs. (for top case V46NT
TECH)
Torsion spring, 1 pcs.
29
Z721R
Pin. D. 04x85 mm
28
30
Z648
Z661
Z661A
Cylinder spring
Key for case lock
Replacement key, silver (for top case V46NT)
7,50
$
30,00
$
2,50
$
$
$
$
24,00
1,50
1,50
2,00
4,00
$
13,00
$
4,50
$
4,50
$
4,00
$
2,00
$
$
$
$
1,50
2,50
10,00
10,00
E41 KEYLESS
1
Z41CDXSM
E41 Top -shell right, black
$
84,00
15
Z314N
Hinge black
$
11,00
2
Z41FNM
E41 bottom shell, black
$
109,00
18
Z548
Keyless logo
$
6,00
$
10,00
20
Z726
$
10,00
$
2,00
3
4
5
7
8
9
10
11
12
13
14
Z41CSXSM
Z599
Z106
Z109
Z140R
Z1237
Z195
Z217
Z236
Z277
Z285
Z312
E41 Top-shell left, black
Nylon stop bag opening yarn
Bolt
Long bolt springs
Lock key, 1 pcs.
Push button spring with washer
Pin D. 04x80 mm
Push button
Hinge spring
Plate below lock
Inner strap
Hinge plate
$
$
$
$
$
$
$
$
$
84,00
17
1,50
19
1,50
22
2,00
6,00
1,00
4,00
12,00
2,00
23
24
25
26
27
28
29
Z590R
Z148M
Z200
Z539
Z544
Z545
Z592
Z1239
Z1238
Injection covering cap
Pin. Medium, 2 pcs.
Black lock lining
Mounted hinge (including combination)
GIVI logo Monokey®
Red hooks to fix lid, (1 pcs.)
Caps (4 pcs.§)
Keyless round medal chromed
41 mm pin to fix the lid
Hinge plate in nylon
Nylon tooth catch mechanism
THE ITALIAN SIGN OF MOTODESIGN
$
$
$
TBD
2,00
5,00
$
26,00
$
2,00
$
$
$
$
$
$
4,00
7,00
5,36
1,50
3,50
3,00
93
SPARE PARTS
1
E460
1
Z460CNM
E460 top-shell black
$
73,00
17
Z217
Push button
$
6,00
3
Z115R
Stop bag opening yarn, 2 pcs.
$
3,00
20
Z277
Plate below lock
$
4,00
Z360FNM
2
Z159R
4
Z828
5
Z106
6
Z109
7
9
11
13
14
15
16
Z140R
Z1237
Z195
Z200
Z214
Z215N
E460-E360 bottom-shell black
Bag lock lining, 1 pcs.
Stop lamp holder
Bolt
Long bolt springs
Lock key, 1 pcs.
Push button spring with washer
Pin D. 04x80 mm
GIVI logo Monokey®
Top case reflector
Rear band black
$
$
$
91,00
3,00
6,00
$
10,00
$
10,00
$
2,00
$
$
$
$
$
1,50
2,00
4,00
19
21
22
23
24
25
26
27
Z236
Z280
Z285
Z312
Z314N
Z829
Z337
Z362
13,00
Rear band plate
Inner strap
Hinge plate
Hinge black
Light holder (black)
Top-case reflector
Z155
Light seat chromed
Circuit with lamps for version with stop light already
mounted
Pass belt clip
Z358
20,00
Hinge spring
$
$
1,00
2,00
$
12,00
$
11,00
$
4,00
$
$
$
2,00
6,00
5,00
$
19,00
$
2,00
E360
1
Z360CNM
E360 top-shell black
$
67,00
14
Z214
Top case reflector
$
20,00
3
Z115R
Stop bag opening yarn, 2 pcs.
$
3,00
16
Z217
Push button
$
6,00
Z360FNM
2
Z159R
4
Z106
5
Z109
6
SPARE PARTS
8
10
12
13
94
Z140R
Z1237
Z195
Z200
E460-E360 bottom-shell black
Bag lock lining, 1 pcs.
Bolt
Long bolt springs
Lock key, 1 pcs.
Push button spring with washer
Pin D. 04x80 mm
GIVI logo Monokey®
= Item available until it runs out of stock
$
$
91,00
3,00
$
10,00
$
10,00
$
2,00
$
$
$
1,50
2,00
4,00
15
18
19
20
21
22
Z215N
Z277
Z280
Z285
Z312
Z314N
Z155
Rear band black
Plate below lock
Rear band plate
Inner strap
Hinge plate
Hinge black
Pass belt clip
$
$
$
13,00
4,00
2,00
$
12,00
$
11,00
$
$
2,00
2,00
E21 CRUISER
Z21CNDXM
E21 top-shell black (right)
$
50,00
9
Z387
Bolt
$
2
Z21FNM
E21 bottom-shell black
$
47,00
11
Z389
Complete key lock plate
$
3
4
5
6
7
8
Z21CNSXM
Z109
Z159R
Z200
Z200C
Z325
Z363R
E21 top-shell black (left)
Long bolt springs
Bag lock lining, 1 pcs.
GIVI logo Monokey®
Chromed GIVI logo Monokey®
Pannier opening sticker
Chromed decoration (pair)
$
$
$
$
$
$
$
50,00
1,50
3,00
10
12
13
4,00
14
2,00
17
6,00
12,00
16
Z388
Z390
Z605
Z606
Z831
Z140R
Push button
Pin D. 02x60 mm E21
Handle
Handle mounting set black
Spring push button
Lock key, 1 pcs.
THE ITALIAN SIGN OF MOTODESIGN
$
$
$
$
$
$
3,00
3,00
5,00
TBD
13,00
11,00
1,00
10,00
95
SPARE PARTS
1
E470 SIMPLY III
1
Z458R
E470 oval logo, 1 pcs
$
5,00
15
Z140R
Lock key, 1 pcs.
$
10,00
3
Z744R
Top case reflector, 1 kit
$
5,50
17
Z637R
Pin. D. 04x75 mm, (1 piece)
$
2,00
Z1294R
2
Z1394
4
Z470CNR
5
Z159R
6
Z635R
8
9
10
11
12
13
14
SPARE PARTS
96
Z115R
Z450FNR
Z1235
Z191R
Z762NR
Z645R
E470 GIVI logo, 1 pcs
Top case reflectors (right and left), 1 kit
E470 top-shell black, 1 pcs.
Bag lock lining, 1 pcs.
Pin. D. 04x48 mm, 2 pcs.
Stop bag opening yarn, 2 pcs.
E470 bottom-shell black, 1 pcs.
Injection covering cap
Push button spring, 1 pcs.
Bolt, 1 pcs.
Push button red, 1 pcs.
= Item available until it runs out of stock
$
3,50
$
20,00
$
3,00
$
$
$
45,00
2,00
3,00
$
TBD
$
1,40
$
$
$
2,50
4,00
4,00
16
18
19
20
21
22
23
24
25
Z641NR
Z721R
Z640R
Z1384R
Z644R
Z647R
Z632R
Z643R
Z409R
Z450FNM
Z641NM
Hinge black
Pin. D. 04x85 mm
Plate below lock, 1 pcs.
Cylinder spring and steek spheres, 1 kit
Opening push button, 1 pcs. (for top case V46)
Torsion spring, 1 pcs.
Steel torsion spring
Lock set element red, 1 pcs.
Name holder, 1 pcs.
E450 - E470 bottom-shell black
Lock set
$
$
$
$
$
$
$
$
$
$
$
13,00
2,50
4,00
2,00
4,50
2,00
1,50
4,50
2,50
77,00
24,00
E450 SIMPLY II
1
Z450CNM
E450 top-shell black
$
80,00
14
Z140R
Lock key, 1 pcs.
$
10,00
4
Z115R
Stop bag opening yarn, 2 pcs.
$
3,00
16
Z630
Steel spheres D. 6
$
1,50
5
6
7
8
10
11
12
13
Z450FNM
Z159R
Z191R
Z451
Z1234
Z458R
Z590R
Z645R
Z762NR
Z358
Z641NM
$
E450 - E470 bottom-shell black
$
Bag lock lining, 1 pcs.
$
Push button spring, 1 pcs.
Oval GIVI mark (reflector)
E470 oval logo, 1 pcs
Push button red, 1 pcs.
Bolt, 1 pcs.
Circuit with lamps for version with stop light already
mounted
Lock set
1,40
10,00
$
5,00
$
Pin. Medium, 2 pcs.
3,00
$
$
Reflector with white background
77,00
$
$
22,00
2,00
4,00
4,00
$
19,00
$
24,00
15
17
18
19
20
21
22
23
24
25
26
Z409R
Z632R
Z637R
Z640R
Z641NR
Z648
Z643R
Z644R
Z647R
Z721R
Z1235
Name holder, 1 pcs.
Steel torsion spring
Pin. D. 04x75 mm, (1 piece)
Plate below lock, 1 pcs.
Hinge black
Cylinder spring
Lock set element red, 1 pcs.
Opening push button, 1 pcs. (for top case V46)
Torsion spring, 1 pcs.
Pin. D. 04x85 mm
Injection covering cap
THE ITALIAN SIGN OF MOTODESIGN
$
$
$
$
2,50
1,50
2,00
4,00
$
13,00
$
4,50
$
$
$
$
$
1,50
4,50
2,00
2,50
2,50
97
SPARE PARTS
2
E370 / E370 TECH
1
Z1294R
E470 GIVI logo, 1 pcs
$
3,50
17
Z1384R
Cylinder spring and steek spheres, 1 kit
$
2,00
3
Z1383R
Top case reflectors (right and left), 1 kit
$
16,00
19
Z640R
Plate below lock, 1 pcs.
$
4,00
$
3,00
Z750R
2
Z370CNR
4
Z159R
5
Z115R
7
8
10
11
12
13
14
15
16
SPARE PARTS
98
Z635R
Z1235
Z191R
Z761NR
Z645R
Z140R
Z641NR
Z637R
Top case reflector, 1 kit
E370 top-shell black, 1 pcs.
Bag lock lining, 1 pcs.
Stop bag opening yarn, 2 pcs.
Pin. D. 04x48 mm, 2 pcs.
Injection covering cap
Push button spring, 1 pcs.
12 Z761NR Bolt, 1 pcs.
Push button red, 1 pcs.
Lock key, 1 pcs.
Hinge black
Pin. D. 04x75 mm, (1 piece)
= Item available until it runs out of stock
$
$
$
$
$
$
$
$
4,00
40,00
3,00
2,00
2,50
1,40
4,00
4,00
$
10,00
$
2,00
$
13,00
18
20
21
22
23
24
Z721R
Z644R
Z632R
Z643R
Z409R
Z647R
Z846R
Z350FNM
Z370CNMR
Z641NM
Z661A
Pin. D. 04x85 mm
Opening push button, 1 pcs. (for top case V46)
Steel torsion spring
Lock set element red, 1 pcs.
Name holder, 1 pcs.
Torsion spring, 1 pcs.
Circuit covering cap, 1 pcs.
E350 - E340 - E370 bottom-shell black
E370 assembled top-shell black
Lock set
Replacement key, silver (for top case E370NT)
$
$
$
$
$
$
$
2,50
4,50
1,50
4,50
2,50
2,00
3,50
$
75,00
$
24,00
$
$
70,00
10,00
E350 FLOW
1
Z350CNM
E350 top-shell black
$
42,00
16
Z630
Steel spheres D. 6
$
1,50
4
Z115R
Stop bag opening yarn, 2 pcs.
$
3,00
18
Z637R
Pin. D. 04x75 mm, (1 piece)
$
2,00
5
6
7
8
9
12
13
14
15
Z350FNM
Z159R
Z191R
Z635R
Z1236
Z645R
Z761NR
Z641NM
Z140R
Z409R
E350 - E340 - E370 bottom-shell black
Bag lock lining, 1 pcs.
Push button spring, 1 pcs.
Pin. D. 04x48 mm, 2 pcs.
Reflector with white background
Push button red, 1 pcs.
12 Z761NR Bolt, 1 pcs.
Lock set
Lock key, 1 pcs.
Name holder, 1 pcs.
$
$
$
$
75,00
3,00
1,40
2,00
$
14,00
$
4,00
$
4,00
$
24,00
$
2,50
$
10,00
17
19
20
21
22
23
24
25
26
27
Z632R
Z640R
Z641NR
Z648
Z643R
Z644R
Z647R
Z721R
Z1235
Z846R
Steel torsion spring
Plate below lock, 1 pcs.
Hinge black
Cylinder spring
Lock set element red, 1 pcs.
Opening push button, 1 pcs. (for top case V46)
Torsion spring, 1 pcs.
Pin. D. 04x85 mm
Injection covering cap
Circuit covering cap, 1 pcs.
THE ITALIAN SIGN OF MOTODESIGN
$
$
1,50
4,00
$
13,00
$
4,50
$
$
$
$
$
$
1,50
4,50
2,00
2,50
2,50
3,50
99
SPARE PARTS
2
E340 VISION
1
Z340CNM
E340 top-shell black
$
70,00
4
Z115R
Stop bag opening yarn, 2 pcs.
$
3,00
Z350FNM
2
Z159R
5
Z191R
6
Z635R
7
Z1648R
8
9
10
11
12
13
SPARE PARTS
100
Z645R
Z229
Z721R
Z761NR
Z1235
E350 - E340 - E370 bottom-shell black
Bag lock lining, 1 pcs.
Push button spring, 1 pcs.
Pin. D. 04x48 mm, 2 pcs.
Rerflector Micro with Bottom-shell argetato
Push button red, 1 pcs.
Chromed GIVI brand
Pin. D. 04x85 mm
12 Z761NR Bolt, 1 pcs.
Injection covering cap
= Item available until it runs out of stock
$
$
$
$
75,00
14
3,00
16
1,40
2,00
$
16,00
$
4,00
$
$
$
$
4,00
2,50
4,00
2,50
15
17
18
19
20
21
22
23
24
Z641NM
Lock set
$
24,00
Z409R
Name holder, 1 pcs.
$
2,50
Z140R
Z630
Z632R
Z637R
Z640R
Z641NR
Z648
Z643R
Z644R
Z647R
Lock key, 1 pcs.
Steel spheres D. 6
Steel torsion spring
Pin. D. 04x75 mm, (1 piece)
Plate below lock, 1 pcs.
Hinge black
Cylinder spring
Lock set element red, 1 pcs.
Opening push button, 1 pcs. (for top case V46)
Torsion spring, 1 pcs.
$
$
$
$
$
10,00
1,50
1,50
2,00
4,00
$
13,00
$
4,50
$
$
$
1,50
4,50
2,00
E300
2
Z29FNM
E280 - E300N - E300B bottom-shell black
$
50,00
11
Z315
Push button
$
5,00
5
Z140R
Lock key, 1 pcs.
$
10,00
13
Z312
Hinge plate
$
2,00
3
6
8
9
10
Z1732SR
Z310
Z115R
Z195
Z191R
Central reflector for E300N
$
$
Base locking plate Monolock
$
Stop cords (sold as pair).
$
Hinge pin 3”
$
Push button spring, 1 pcs.
13,00
10,00
3,00
2,00
1,40
12
14
15
16
Z193
Z236
Z243
Z2000R
Hinge pin 2.5”
Hinge spring
Key lock plate
Chromed GIVI logo
$
$
$
$
2,00
1,00
2,00
6,00
E300B
2
Z29FNM
E280 - E300N - E300B bottom-shell black
$
50,00
11
Z315
Push button
$
5,00
5
Z140R
Lock key, 1 pcs.
$
10,00
13
Z312
Hinge plate
$
2,00
6
8
9
10
Z1732FSR
Z310
Z115R
Z195
Z191R
Central reflector for E300B
Base locking plate Monolock
Stop cords (sold as pair).
Hinge pin 3”
Push button spring, 1 pcs.
$
$
$
$
$
12,00
10,00
3,00
2,00
1,40
12
14
15
16
Z193
Z236
Z243
Z2000R
Hinge pin 2.5”
Hinge spring
Key lock plate
Chromed GIVI logo
THE ITALIAN SIGN OF MOTODESIGN
$
$
$
$
2,00
1,00
2,00
6,00
101
SPARE PARTS
3
E260 MICRO II
4
Z115R
Stop bag opening yarn, 2 pcs.
$
3,00
15
Z632R
Steel torsion spring
$
6
Z310
Bolt
$
10,00
17
Z640R
Plate below lock, 1 pcs.
$
$
14,00
$
6,50
Z191R
5
Z635R
7
Z1236
8
9
10
12
13
14
SPARE PARTS
102
Z645R
Z649
Z641NM
Z140R
Z409R
Z630
Push button spring, 1 pcs.
Pin. D. 04x48 mm, 2 pcs.
Reflector with white background
Push button red, 1 pcs.
Micro 2 GIVI mark
Lock set
Lock key, 1 pcs.
Name holder, 1 pcs.
Steel spheres D. 6
= Item available until it runs out of stock
$
$
$
1,40
2,00
4,00
$
24,00
$
2,50
$
$
10,00
1,50
16
18
19
20
21
22
23
24
Z637R
Z641NR
Z648
Z643R
Z644R
Z647R
Z721R
Z1235
Pin. D. 04x75 mm, (1 piece)
Hinge black
Cylinder spring
Lock set element red, 1 pcs.
Opening push button, 1 pcs. (for top case V46)
Torsion spring, 1 pcs.
Pin. D. 04x85 mm
Injection covering cap
$
1,50
2,00
4,00
$
13,00
$
4,50
$
$
$
$
$
1,50
4,50
2,00
2,50
2,50
E30 TOUR
1
Z30CNM
E30 top-shell black
$
40,00
11
Z236
Hinge spring
$
1,00
5
Z140R
Lock key, 1 pcs.
$
10,00
13
Z310
Bolt
$
10,00
$
2,00
$
5,00
4
6
7
8
Z115R
Z191R
Z193
Z195
Stop bag opening yarn, 2 pcs.
Push button spring, 1 pcs.
Hinge pin 62 mm
Pin D. 04x80 mm
$
$
$
3,00
1,40
2,00
12
14
16
Z243
Z312
Z315
Key lock plate
Hinge plate
Push button
$
$
2,00
2,00
E36
1
Z36CNM
E36 - E45 top-shell black
$
67,00
13
Z160
Inner document holder
$
13,00
4
Z106
Bolt
$
10,00
15
Z167
Spare elastic belt
$
9,00
5
6
8
9
10
11
12
Z101
Z108
Z109
Z185
Z119
Z151N
Z153
Z159R
Push set protection
Top-case push button red
Long bolt springs
Hinge plate
Top-case reflector
Top-case hinge E36 black
Key lock plate
Bag lock lining, 1 pcs.
$
$
$
$
$
12,00
3,00
1,50
2,00
7,00
$
13,00
$
3,00
$
3,00
14
16
18
19
20
21
23
Z165
Z1237
Z186
Z590R
Z195
Z208 Z140R
Z155
Adhesive series
Push button spring with washer
Rectangular GIVI mark
Pin. Medium, 2 pcs.
Pin D. 04x80 mm
Chrome bushing for lock set
Lock key, 1 pcs.
Pass belt clip
THE ITALIAN SIGN OF MOTODESIGN
$
$
$
$
$
$
$
$
6,00
2,00
5,00
2,00
2,00
3,00
10,00
2,00
103
SPARE PARTS
3
E45
1
Z36CNM
E36 - E45 top-shell black
$
67,00
12
Z159R
Bag lock lining, 1 pcs.
$
3
Z101
Push set protection
$
12,00
14
Z166
Series stickers E45
$
Z45FNM
2
Z106
4
Z108
5
Z109
6
Z153
8
9
10
11
Z119
Z152N
Z117
E45 bottom-shell black
Bolt
Top-case push button red
Long bolt springs
Key lock plate
Top-case reflector
Top-case hinge E45 black
Hinge plate
$
$
$
$
$
$
$
$
97,00
10,00
3,00
1,50
3,00
7,00
11,00
2,00
13
15
16
17
18
19
22
Z160
Z167
Z1237
Z186
Z590R
Z195
Z156
Z155
Inner document holder
Spare elastic belt
Push button spring with washer
Rectangular GIVI mark
Pin. Medium, 2 pcs.
Pin D. 04x80 mm
Key for case lock
Pass belt clip
3,00
$
13,00
$
9,00
$
$
$
$
$
$
6,00
2,00
5,00
2,00
2,00
8,00
2,00
E35 TRAFFIC II
Z106
1
Z109
2
Z1237
4
Z193
5
SPARE PARTS
Z200
6
7
10
11
104
Z282
Z840 Z362
Bolt
Long bolt springs
Push button spring with washer
Hinge pin 62 mm
GIVI logo Monokey®
Push button
8x5mm shell packing black
Light seat chromed
= Item available until it runs out of stock
$
$
$
$
$
$
$
$
10,00
1,50
2,00
2,00
4,00
6,00
6,00
5,00
12
Z828
13
Z140R
Stop lamp holder
Circuit with lamps for version with stop light already
mounted
Lock key, 1 pcs.
19
Z290N
Hinge black
Z358
16
24
25
Z286
Z297
Z287
Glass for small name plate
Pin 140 mm
Maxia hinge plate
$
6,00
$
19,00
$
10,00
$
20,00
$
9,00
$
$
2,50
2,50
NOTE
THE ITALIAN SIGN OF MOTODESIGN
105
MOTOPLANETARY DESIGN
GIVI USA Inc. 9309 Forsyth Park Drive Charlotte, North Carolina 28273 - USA
[email protected] Toll Free 877 679-4484 www.giviusa.com

Similar documents