Dock Products C a t a l o g

Comments

Transcription

Dock Products C a t a l o g
Dock Products
Catalog
A
M e m b e r
o f
Visit us online at:
www.taylormadeproducts.com
Taylor Made offers a complete
line of versatile, durable docking
protection . . . from marine-grade
vinyl profiles, to longer lasting,
higher durometer EPDM rubber
edging to our superior foam-filled
polyester Perimeter® products. No
matter what your docking conditions, Taylor Made has the product
to protect your investment!
Rubber Dock Edging Profiles
Small Edge Gard
Medium Edge Gard
Commercial P-Shape
Commercial Side Gard
Traditional P-Shape
GOOD!
Dock Pro™
Vinyl Dock Edging
C-Shape Gard
Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A
tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails.
Small Edge
Gard
Medium Edge
Gard
C-Shape
Gard
We ig ht pe r
10’ st rai gh t:
5 lb s.
Wei ght per
1 0’ stra igh t:
7 .5 lb s.
We ig ht pe r
10’ st rai ght:
6 .1 l bs.
White
Black
Stock No. Stock No. Description
White
Black
Stock No. Stock No. Description
#46067
#46065
10' Straight
#46062
#46061
10' Straight
Taylor Made Products also offers a line of EPDM
rubber edging for docks and piers. EPDM rubber is
designed to withstand the harshest of environments, and is soft enough to cushion your boat
from the dock or pier. At 70 Durometer this new
premium line of dock edging starts softer than
vinyl, and stays flexible when exposed to UV,
offering uncompromising longevity.
The “Wave”
A ll Viny l E dg ing - Inn er Dero me te r - 85
Ou ter D er ome ter - 75
Heavy Duty Double Molded Profiles
BETTER!
Traditional Side Gard
The “P” profile is designed to attach to the top of
the dock and wrap around to also protect the side
of the dock. Available in two different sizes to best
suit all applications.
Small
Stock No.
Large
Stock No.
Description
#96040
6' Length
#96039
“D” Profile
White
Black
Stock No. Stock No. Description
#46024
“P” Profile
#46023
10' Straight
Commercial Grade Double Molded Profiles
Dock builders, marina’s and even a few larger boat owners asked for profiles with heavier wall sections to provide greater
protection for their applications. This heavy duty double molded PVC dock edging is made from the same quality marine
grade resins and with the same double molding process as our heavy duty vinyl products.
The “D” profile is a convenient way to protect the
edge of the dock. This edging is not only easy to
install, but it also fits snugly around the radius of
the dock corners.
Small
Stock No.
Large
Stock No.
Description
#96041
#96042
12' Length
Heavy Duty Rubber Dock Extrusion
These thick, pliable, abrasion-resistant rubber strips
can be nailed along the edges of docks and pilings.
Premium rubber material will not mar your boat,
but is great for absorbing shock and protecting your
hull.
Commercial Grade
Side Gard
Commercial Grade P-Shape
Wei gh t per
1 0’ stra igh t: 9 .8 lbs .
Stock No. Description
Double “D” Profile
#46031
Small 10' Straight-White
Same great design as the “D” profile, times two.
With a custom designed notch in the back of this
edging, it can easily bend around everything from
pilings to 90 degree dock edges.
White
Stock No.
Black
Stock No.
#46030
#46018
Sma ll weig ht per 10 ’ s trai ght: 8 .5 lbs.
La rge we igh t pe r 1 0’ st rai gh t: 11.5 lb s.
#46032
Large 10' Straight-White
Description
#46020
Small 10' Straight-Black
10' Straight
#46019
Large 10' Straight-Black
Traditional Vinyl Profiles
The “Wave”
Traditional vinyl profiles are molded from vinyl especially formulated for softness and durability. Each piece installs easily to the edges of docks, piers or
floats with screws or nails.
Create a bumper grid with superior
shock absorbing and protective ability.
Comes complete with mounting nails.
25 ft. Coil will protect approximately
18 ft. of dock space.
Side Gard
P-Shape
Gard
Stock No.
Description
#96036
12' Length
Heavy Duty Side Profile
Specially designed edging can be used as side
protection for docks, or for vertical protection on
pilings.
Stock No.
Description
#96037
6' Length
Top-Side Profile
Small
Stock No.
#46083
Large
Stock No.
Description
Stock No.
Description
#46084
8' Straight
#46092
8' Straight
Sma ll we ig ht pe r 8’ st rai gh t: 2 .6 l bs .
L arge we ig ht pe r 8’ str aigh t: 7 lbs .
Wei gh t per 8 ’ s trai ght: 5.4 lbs.
Stock No.
#46069
Description
25' Coil
Wei gh t per 2 5’ c oil: 16 .75 lb s.
This edging offers protection for your boat right
where you need it most. The Top-Side profile not
only covers the side of the dock, but it also protects the top as well.
Stock No.
Description
#96038
6' Length
Dock & Post Bumpers
“D” Profile
Side Profile
Double “D” Profile
BEST!
Available in multiple bumper profiles up to 50’ in length to fit your exact
needs. Male/Female connection ends available with volume orders.
• Will not deteriorate in the sun or mar your boat.
• Polyester textile cover and closed-cell foam inner
cushion, NOT vinyl, PVC or rubber.
• Cleans easily with liquid soap and a brush.
• Flexible tab system allows standard “Top-of-Dock” or unique
“Fold-Over” mounting which conceals the top row fasteners.
• Flexible enough to mount on curves or around corners.
RECOMMENDED ATTACHMENTS –
To best install your Dock & Post Bumper, drive 1" stainless steel pneumatic staples, 1.25" stainless steel #8 or #10 oval or flat head Phillips screws with stainless finishing washers, or 1.5" largeheaded stainless steel or aluminum nails through each tab every 3 to 4 inches.
“P” Profile
Top-Side Profile
Small:
We ig ht pe r
6 ' le ngth:
2 .4 6 l bs.
Large:
Wei ght per
6 ' l eng th:
2 .4 6 l bs.
Length
Stock No.
Length
DDB2.30
3'
DDB3.30
3'
DDB2.40
4'
DDB3.40
4'
DDB2.60
6'
DDB3.60
6'
DDB2.90
9'
DDB3.90
9'
DDB2.CU25
25'
DDB3.CU25
25'
DDB2.CU50
50'
DDB3.CU50
50'
DDB2.CU
10-49'
DDB3.CU
10-49'
Stock No.
Description
#96000
2-1/4"
6' Length
#96001
3-1/2"
6' Length
Medium Double
8" W x 1 3/4" D
Stock No.
Small
3 5/8" W x 1 1/4" D
Small:
Wei ght p er
1 2 ' len gt h:
6 lb s.
Large:
Weig ht p e r
1 2 ' l en gth :
10 lbs .
Stock No. Size
Small Double
5 1/2" W x 1 1/4" D
Length
Medium
4 1/2" W x 1 3/4" D
Large
5 1/2" W x 2 1/4" D
Stock No.
Stock No.
Extra-Large
8" W x 3 1/4" D
Length
Stock No.
Length
3'
DB3.30
3'
DB4.30
3'
DB6.30
3'
DB2.40
4'
DB3.40
4'
DB4.40
4'
DB6.40
4'
DB2.60
6'
DB3.60
6'
DB4.60
6'
DB6.60
6'
DB2.90
9'
DB3.90
9'
DB4.90
9'
DB6.90
9'
25'
DB2.CU25
25'
DB3.CU25
25'
DB4.CU25
25'
DB6.CU25
DB2.CU50
50'
DB3.CU50
50'
DB4.CU50
50'
DB6.CU50
50'
DB2.CU
10-49'
DB3.CU
10-49'
DB4.CU
DB6.CU
10-49'
10-49'
SMALL
3 5/8”W
1 1/4” D
MEDIUM
4 1/2”W
1 3/4” D
SMALL DOUBLE
5 1/2”W
1 1/4” D
Wei ght per
6 ’ l eng th :
4.38 ' lbs.
Length
“Fold-Over”
installation method
DB2.30
We ig ht pe r
1 2 ' l eng th :
7.92 l bs .
Wei ght p er
6' l eng th :
5.3 4 l bs .
“Top-of-Dock”
installation method
LARGE
5 1/2”W
2 1/4” D
MEDIUM DOUBLE
8” W
1 3/4” D
Super Edge
Dock Bumpers
These bumpers are designed
for heavy duty applications
and include the same great
features as our Perimeter
Dock Bumpers. Available in
two sizes: Medium at 3" and
large at 4" diameter; in 3',
4', 6' and 9' lengths. Custom
lengths available as special
orders (per ft. pricing)
Stock No.
Description
SEDB3.30
Medium Bumper
Length
3'
SEDB3.40
Medium Bumper
4'
SEDB3.60
Medium Bumper
6'
SEDB3.90
Medium Bumper
SEDB3.CU
Custom Length Bumper
9'
10-49'
SEDB4.30
Large Bumper
3'
SEDB4.40
Large Bumper
4'
SEDB4.60
Large Bumper
6'
SEDB4.90
Large Bumper
SEDB4.CU
Custom Length Bumper
9'
10-94'
EXTRA LARGE
8”W
3 1/4” D
Dock Bumpers - Straights
Dock Cushions
Dock Pro™ Heavy Duty Vinyl Dock Bumpers
White polyethylene foam provides superior cushioning from impact. UV protected foam material is maintenance free and non-marring. Designed for both
horizontal and vertical applications, dock cushions are pre-drilled and permanently mount with plated fasteners (included).
Dock Pro heavy duty vinyl bumpers are ideal
for rough conditions, and can take a beating.
Made from U.V. resistant, marine grade
vinyl, they provide excellent protection for
your boat and dock. Can be mounted horizontally, or the curved back panel allows for
vertical mounting on pilings. Inflation
valvesfor easy adjustment to desired firmness.
Pre-drilled for easy, permanent mounting
with plated fasteners.
Bends Without
Breaking!
Stock No. Size
#46077
4" x 6" x 48"
#46055
Retail Package
Stock No.
Boat Guide Bumper
Fender Board Guards
Fit both 7/8" and 1 3/4" diameter pipes.
Attach these rubber cushions
to both ends of a 2" x 4" to
give you a padded fender
board.
• Guides your boat
onto its lift without
damaging the boat.
• Polyester cover
protects your boat
and the foam from
the sun.
Stock No. Pipe Size
#45500
Dock Pro ™ Straight Vinyl Dock Bumpers
Protects the side and top of the dock with 1-1/4"
cushion above dock level. Made from the same
tough marine grade vinyl as our fenders. Solid
flaps attach easily to any dock, and the superior
cushioning protects boats and docks from each
other. Color is permanently molded into the
vinyl and will not transfer to the hull.
Length
Stock No. Color
Description
4" x 27"
#46075
Black
Straight mount 18"
#46082
White Straight mount 18"
BGB4.1
7/8" Dia.
BGB4.2
1 3/4" Dia. 4" x 27"
Stock No. #96011
Dock Bumpers - Corners
Dock Pro ™ Inflatable Dock Wheels
90 Degree Vinyl Corner Bumper
Corner Guard
Smooth rolling wheels offer substantial dock cushioning and feature molded-in valves to adjust the level of firmness. Heavy duty
hot-dipped galvanized hardware mounts securely to the dock.
12" and 18" wheels use a large 2" diameter axle housing for maximum strength. NOTE: Brackets
and wheels are not interchangeable.
Made from the same tough PVC as our dock extrusions, this 90
degree corner (outside) will protect your boat from this critical
point. Inside structural ribs provide
the impact resistance you need
while it’s flush fit end sections give
your install ation a “ fini shed”
appearance. Inside dimensi ons
cover 6” each side.
Made from the same great rubber
material as our dock extrusion.
Use with
our dock
strips for
complete
protection.
Wheel
Size
9"
Corner
Stock No.
#1078
Straight
Stock No.
#1079
Stock No. Description
0
Stock No.
Description
12"
#1072
#1073
#46015
90 Corner 6"x6" White
#96008
2-1/4" x 6" corner
18"
#1081
#1082
#46016
900 Corner 6"x6" Black
#96009
3-1/2" x 6" corner
Dock Pro™ Heavy Duty Vinyl Dock Bumper
Perimeter® Corner Bumper
Dock Pro™ Vinyl Corner Bumper
Dock Pro heavy-duty vinyl corner bumpers provide superior
impact protection on dock corners and have the same great
features as our straight bumper (#45500).
Our corner sections are designed to match up perfectly with our medium, large and X-large Perimeter Dock
Bumpers and extend 12"
along each side of the dock
from the corner point.
Mounting flanges are incorporated both top and bottom
for secure installation.
Protects the side and top of the dock
with 1-1/4" cushion above dock level.
Solid flaps attach easily to any dock.
Stock No. Size
#45510
13.5"L x 6"W x 10.5"H
Stock No.
Description
CB3.20
Medium
3" x 12"L
Length
CB4.20
Large
4" x 12"L
CB6.20
X-Large
6" x 12"L
Stock No.
Description
#46076
Black, 10"x10"
#46081
White, 10"x10"
Gunnel Guard
Flexible cushion and tabs allow for easy attachment with screws and washers.
Larger sizes commonly used for work boats, launches and other heavy-duty applications. Sold by the foot or in 50' self dispensing display boxes.
RECOMMENDED AT TACHMENTS – To best install your Gunnel Guard, drive
self-tapping (or self-drilling for fiberglass) 1/2" stainless steel #6 Phillips screws with
stainless finishing washers through each tab every 3 to 4 inches.
•
•
•
•
Polyester covered, not cotton canvas.
Wears over 10 times longer than similar products.
Will not rot in the sun or mar your boat.
Perfect for Whalers, dinghies, swim steps . . .
Half-Round
Gunnel Gu ard
Stock No.
Description
Tab Size
Length
GG1.253Q.50
Gunnel Guard 3/4-Round
Diameter
1 1/4"
5/8"
50'
GG1.253Q.CU
Gunnel Guard 3/4-Round
1 1/4"
5/8"
<50'
GG1.5HR.10
Gunnel Guard 1/2-Round
1 1/2"
5/8"
10'
GG1.5HR.20
Gunnel Guard 1/2-Round
1 1/2"
5/8"
20'
GG1.5HR.50
Gunnel Guard Half-Round
1 1/2"
5/8"
50'
GG1.5HR.CU
Gunnel Guard Half-Round
1 1/2"
5/8"
<50'
GG1.53Q.10
Gunnel Guard 3/4-Round
1 1/2"
3/4"
10'
GG1.53Q.20
Gunnel Guard 3/4-Round
1 1/2"
3/4"
20'
GG1.53Q.50
Gunnel Guard 3/4-Round
1 1/2"
3/4"
50'
GG1.53Q.CU
Gunnel Guard 3/4-Round
1 1/2"
3/4"
<50'
GG2.03Q.50
Gunnel Guard 3/4-Round
2"
3/4"
50'
GG2.03Q.CU
Gunnel Guard 3/4-Round
2"
3/4"
<50'
GG3.03Q.50
Gunnel Guard 3/4-Round
3"
3/4"
50'
GG3.03Q.CU
Gunnel Guard 3/4-Round
3"
3/4"
<50'
GG4.03Q.50
Gunnel Guard 3/4-Round
4"
1 1/2"
50'
GG4.03Q.CU
Gunnel Guard 3/4-Round
4"
1 1/2"
<50'
Packaged Stainless Steel
Cup Washers & Screws
Looking for the Best Method to install your
Perimeter Dock & Post Bumpers? Whether your
using the fold-over or Top of the Dock installation
methods, we recommend stainless steel fasteners
and finishing washers
through each tab,
spaced every 3-4".
Stock No.
#96031
Description
3/4-Round
Gunnel
Guard
1 1/2” dia.
1 1/4” dia.
1 1/2” dia.
Post Bumpers
Stock No.
Description
#96027
1/8 lb. bronze
Post bumpers are great protection for
pipe supported type docks. Protects
the boat from contact with the metal
dock pipe and hardware at dock
level. Easily slides over 1 1/2" dock
pipe and rests securely against the
dock. Molded from marine grade
vinyl with an inflation valve to
adjust firmness.
Stock No.
Color
DxL
White
7" x 17"
Blue
7" x 17"
SS screw & washer 60pk.
#96028
1/8 lb #6 galvanized
#45600
(Blister packed, 12 per clip strip)
#96002
1/2 lb. bronze
#45604
Wheel
Size
Corner Mount
Stock No.
Boat
Size
9"
#1076
Up to 20'
12"
#1074
20' to 30'
Stock No.
Description
#46049
Corner mount 10" x 10"
#46048
Straight mount 18"
2” dia.
4” dia.
3” dia.
Bronze nails come with a 1 1/4" #12
bronze nail s wit h ri ng shank.
Galvanized screws come with a washer. (1/8 lb pks-12 per strip)
We have combined our quality line of dock products with
MarineGlo’s™ revolutionary new glow-in-the-dark technology.
State of the art phosphorescents are imbedded during the production process. These new phosphorescents produce an afterglow of
over 6 hours. Taylor Made’s® MarineGlo™ dock products are still
glowing long after other glow-in-the-dark products have failed.
Drawings not to scale.
3/4-Roun d Gunne l Gua rd
Nails
Bumpers & Inflatable Vinyl Dock Wheels
Half-Round
Gunnel Guard
Sur-Moor™ Buoys
Sur Moor™ T3C
Mooring Buoy
The sole purpose of the mooring buoy is to support the mooring chain. The two preferred
designs for mooring buoys are a traditional buoy with hardware or a buoy with a tube through
the center. Both offer reliable flotation and will last for several seasons, depending upon the
salinity of the water.
A permanent mooring system, when properly designed, should securely position a boat so
that it can be left unattended, with little attention, for long periods of time. Each system usually consists of a mooring buoy (to float the chain), a mooring anchor and a length of chain
(running between the anchor and the mooring buoy). A lso the proper ground tackle includes
correct sized galvanized shackles and swivels. Always keep in mind, that the mooring system
is only as reliable as the “current” conditions of the environment. All Taylor Made®
Sur-Moor ™ Buoys are built to withstand the constant abuse of most mooring environments.
Mooring Pennant
Sur Moor™ T3C
Hard Skin Buoy
Galvanized Shakle
(attaches to boat &
mooring shackle)
Mooring
System
Light Chain
Light Chain
Galvanized Shakles
WARNING: The sole purpose of the mooring buoy is to support the mooring chain. The
boat should be tied to the anchor chain, never tied to the buoy or hardware.
Shackle & Swivel
† Buoyancy rating: The number indicated is the maximum flotation the buoy provides while fully submerged. 50% of
this value will be the weight the buoy can support at the level of the blue stripe.
Sur-Moor™ T3C™ Mooring Buoy
Heavy Chain
Traditional Sur-Moor™ Mooring Buoy
Sur- M o o r™ hard skin mooring buoys have a seamless and
tough, one-piece polyethylene shell. Hard skin shells feature
ultraviolet
light
absorbers for long-term life
under the sun, and have a
sandblasted finish which
allows the buoy to be easily
painted for identifying.
Filled with EPS foam to
positively displace water.
Tu b e - t h r o u g h - t h e - c e n t e r
design with blue reflective striping. Hardware not included.
Tube Buoy
Approx.
Stock No. Dia. Dia. Circumference Buoyancy†(lbs.)
• Hot-dipped galvanized steel hardware included.
• Blue stripe is reflective for nighttime visibility.
• Sandblasted finish allows the buoy to be easily
painted for identifying.
Stock No. Dia. Circumference
2"
12"
38"
30
#22170
12"
38"
30
#46371
2"
15"
47"
60
#22171
15"
47"
60
#46372
2-1/2" 18"
57"
100
#22172
18"
57"
100
#46374
2-1/2" 24"
75"
240
#22174
24"
75"
240
95"
460
3"
30"
Three-year flotation warranty on all hard skin buoys*
Flanged collar made from rigid PVC tubing. Blue stripe is
reflective for nighttime visibility.
Sully Stick™ Winter Stick
Used during the winter months, the Sully
Stick has a molded in eyelet at the top for
easy retrieval. The base eyelet is reinforced
with a galvanized metal bushing to attach a
rope and connect to the anchor chain. The
shape of the Sully stick helps it escape ice
entrapment better than a round buoy and
can extend the useful life of a mooring buoy
by protecting it from the damaging effects
of freezing temperatures.
Approx.
Buoyancy†(lbs.)
#46370
#46375
Mushroom anchor or block
Three-year flotation warranty on all hard skin buoys*
WARNING: Mooring lines must never be tied to
the top loop. Mooring lines should always be
attached to the anchor chain.
Widest
Approx.
point
Stock No. Dia. Length Buoyancy†(lbs)
#22140
6"
80"
40 lbs.
Bridle Plate Mooring System
Storm Surge Anchor System
Mooring attachment system that allows up to three lines from the mooring to
your boat. The system maintains mooring line separation to minimize chafe
and increase line life. No more tangled mooring lines! Two systems are available for multi-hulls (3 lines to boat) or mono-hulls (2 lines to boat). Also
available with safety shackles and swivel that utilize nuts and cotter pins that eliminate the need
for wire seizing. For boats 25’-60’ in length and
8,000 lbs-fSWL. Breaking strength 32,000 lbs-f.
The system can use up to 1 inch lines with normal thimbles or 3/4” lines with HD thimbles.
Recommended attachment point is below the
mooring buoy.
System allows for the placement of three anchors on a swivel and up to three lines
back to the boat. The boat can swivel on the anchors without getting anchor chains
and lines twisted around each other. The minimum breaking strength for this
heavy-duty system is over 32,000 lbs-f. Safe working load of 8,000 lbs-f. It comes
complete with galvanized bridle plates, shackles and a swivel. Also available with
safety shackles and swivel that utilize nuts and cotter pins that eliminate the need
for wire seizing. For boats 25’-60’ in length. The system can use up to 1” lines with
normal thimbles or 3/4” lines with HD thimbles. 3/8” HDG shackles are needed for
attaching chain to the system.
Monohull
Monohull
Multihull
Stock No.
Description
Stock No.
Description
#33040
Monohull (2 shackle attachment points)
#33060
Monohull
#33040S
Monohull (2 shackle attachment points) w/safety shackle
#33050
Multihull (3 shackle attachment points)
#33040S
Multihull (3 shackle attachment points) w/safety shackle
#33060S
#33070
#33070S
Monohull with safety shackle
Multihull
Multihull with safety shackle
Sur-Mark™ Marker Buoys
Sur-Mark™ Buoy Labels
•
•
•
•
•
Fade resistant, self-adhesive vinyl marker labels.
Brightly colored for high visibility.
Two labels required per buoy (sold in pairs).
Each label is 13" wide x 24" long to fit either Sur-Mark™ or SurMark™II.
All labels are warranted for 5 years against weathering or fading.
#46171
#46172
#46173
#46174
#46175
#46176
#46177
#46178
#46179
#46180
#46181
#46182
#46183
#46184
#46185
#46104
#950410
#950400
#46103
Buoys include orange
marking tape.
Label sold separately.
Stock No.
Sur-Mark™ and Sur-Mark™II regulatory buoys are
molded from tough UV protected polyethylene. Onepiece seamless construction, internal concrete ballast, recessed galvanized eye; both styles stand
upright for storage. Color labels and Solar Lights
(sold separately) fit both styles.
Col. Large Buoyancy Visible Ht.
Dia. Ring Dia. (lbs.) Above Waterline
Style
Ht.
Sur-Mark II
61"
9"
—
15
37"
#46104
Sur-Mark
49"
10"
18"
40
39"
#950400
Green Sur-Mark
49"
10"
18"
40
39"
49"
10"
18"
40
39"
#46103
#950410 Red Sur-Mark Nun
#46186
#46187
#46188
#46191
Regulatory Buoys
Solar Warning Light
Taylor Made Products manufactures the most rugged and complete line of
navigational buoys in the United States. We have been meeting the stringent requirements of states, municipalities, and private harbors for many
years. Our buoys are used in the toughest applications.
• Solar powered light charges during the daylight hours and automatically turns
on at dusk to alert boaters of hazards.
Regulatory buoys feature rotationally molded high density polyethylene
shells that are UV stabilized. The rotational molding process allows for uniform wall thickness without the internal stresses that cause cracking over
time and under extreme temperature changes. This process imparts
tremendous impact strength to the shell.
• The light comes equipped with steady on mode, slow flash (15 times/minute),
and fast flash (60 times/minute) all within the same unit.
Stock No.
Description
• Available in white, red, or green LEDs. All come with clear lens.
• Unit is constructed with a tough, waterproof (not submersible) plastic housing
to keep the light working in all conditions.
NOTE: Check with the local agency governing your waterway before installing.
Three-year flotation warranty
on all hard skin buoys
Overall
Height
• Easily attaches to buoys, docks, moorings, or anything else that needs night
time identification.
Max.
Diameter
Approx.
Buoyancy
(lbs.)
Stock No.
Description
#950280
Red Nun
48"
24"
235
#46106
White warning light
#950290
Green Can
48"
24"
235
#46107
Red warning light
#950300
Danger Can
48"
24"
235
#46108
Green warning light
Dock Floats
Seamless, UV-resistant black polyethylene shell filled with EPS foam. The
tough outer shell resists impacts and protects the foam core from saltwater,
gasoline and most chemicals. Thick mounting flange can be drilled to
accommodate attachment fasteners for easy mounting to any dock design.
• 8 Year Flotation Warranty
Stock No.
Description
Approx. Flotation (lbs.)
#46116
24" x 48" x 12" H
450
#46117
24" x 48" x 16" H
600
#46118
24" x 36" x 12" H
335
Cross section shows
EPS foam core.
Minimum Recommended Mounting
Hardware:
• 3/8” x 3” lg. lag screw
• 3/8” washer & 5/8” washer American
National Standard Type A plain washers
(series W)
Dock Pro™ Dock Cart
StepSafe™ Dock Steps
The Dock Pro dock cart is simply the easiest way to carry all your gear from the
car to the boat.Curved handle design reduces bending-over, making the Dock
Pro dock cart easier to handle than conventional carts, while the unique angled
tub feature provides better
leg clearance for maneuvering. Features a spacious 7
cu. ft. heavy wall rotomolded poly-tub that will
not rust or rot. Zinc coated
corrosion resi stant hardware used throughout.
Plastic rim wheels wit h
roller bearings will stand up
to the harshest mari ne
environment.
Molded in durable U .V. resistant
Polyethylene, our dock steps are offered
in three different tread step models. On
the top of each step, Taylor Made
Products own StepSafe™ non-slip pad is
adhered for additional slip protection
while boarding. 1 1/2" wide flange provides adequate mounting surface for
docks. Cleans easily with soap and water.
Additional hand rails are available for
two and three step models, sold separately.
Stock No. Wht. Capacity
Wheel Size
Stock No. Description
Size (Length x Wide x Height)
#47100
Single Tread Step
22"L x 18"W x 11.5"H
#47200
Double Tread Step
26.75"L x 23.5"W x 17"H
Wheel Type
#47201
Hand Railing (for double step model)
#1070
300 lbs.
20"
Pneumatic (inflatable)
#47300
Triple Tread Step
#1060
300 lbs.
20"
Solid
#47301
Hand Railing (for triple step model)
35"L x 25"W x 25.5"H
Piling Caps
Made from heavy duty polypropylene, these piling caps will discourage birds from sitting on top of your pilings. Available in 5
diameters to best fit your needs.
Stock No. Color
Color
Dia.
#6205
Black
Dia.
7"
Stock No.
#6200
White
7"
#6206
Black
8"
#6201
White
8"
#6207
Black
9"
#6202
White
9"
#6208
Black
10"
#6203
White
10"
#6207
Black
11"
#6204
White
11"
BoatGuard® Mooring Whips
Finally an economical way to protect your boat in higher wake areas.
Designed with the same tough standards as our fixed base and our premium
Mooring whips, these new whips provide the “safety zone” between dock
and boat for many types of docking applications. Unlike the competition,
these mooring whips have a large diameter solid fiberglass pole that withstand most marine environments and provide that spring action to keep
your boat safely away from the dock. CAD designed Whip Base is injection
molded from high impact reinforced plastic for incredible strength and
durability. Sold as pairs and include all lines and hardware to complete the
installation.
Note: Some docking conditions may be too rugged for this
product.
DESIGNED FOR:
• Fresh water use
• Low wake areas
• Non tidal regions
Stock No.
Description
For Boat Sizes by Weight
#99079
BoatGuard Mooring Whip 8’
UP to 2500 lbs.
#99080
BoatGuard Mooring Whip 12’
Up to 5000 lbs.
#99081
BoatGuard Mooring Whip 14’
Up to 10000 lbs.
Specifically
designed for boats
up to 25 ft and
under 10,000 lbs
Base is injection
molded from high
impact reinforced
plastic for incredible strength and
durability
Standard & Premium Mooring Whips
Mooring whips are a safe way to protect your boat against costly
dockside and seawall damage. The Mooring Whip system pulls
your boat a safe, convenient distance away from the dock thereby
protecting it from the damaging forces of waves, wind, tides and
wakes. Mooring Whips are made of high quality solid fiberglass
poles, aluminum-magnesium base units, tips, and mooring w h i p
lines. Each set comes complete with all of the hardware necessary
for ins tallation. Standard
Mooring Whips and Premium Tips allow your boat to return
Mooring Whips are sold in to the dock effortlessly when
pairs. The PWC M o o r i n g you want to board.
Whip is a one-pole system
with a flush mount base and
is commonly used on swim
platforms.
Standard Mooring Whips
DESIGNED FOR:
• Fresh or Salt water use
• Moderate wake areas
• Minimal tide areas
Premium Mooring Whips
Standard Mooring Whips are equipped with fixed
angle bases and are most commonly used for ski
boats, runabouts, center consoles, and bass boats.
For Boat Sizes Length/Weight
DESIGNED FOR:
• Salt water use
• Large tidal areas
• Ideal for Large Boats
Premium Mooring Whips are equipped with unique rocker
arm bases that return the whip poles to the vertical position
when not in use. These are ideal for sailboats and larger,
heavier or high profile boats.
Stock No.
Mooring Whip Description
MW.080
Fixed Angle Base 8’
Up to 20’ / to 2500 lbs.
PMW.1400
Rocker Arm Base 14’
Up to 33’ /to 20000 lbs.
MW.120
Fixed Angle Base 12’
18’ to 23’ / 2500-5000 lbs.
PMW.1600
Rocker Arm Base 16’
34’ to 46’ /20000-36000 lbs.
MW.140
Fixed Angle Base 14’
24’ to 28’ /5000-10000 lbs.
PMW.1800
Rocker Arm Base 18’
47’ to 56’ /36000- 48000 lbs.
MW.160
Fixed Angle Base 16’
29’ to 33’ /10000- 20000 lbs.
Stock No.
Stock No.
Premium Whip Description
For Boat Sizes Length/Weight
Description (Personal Watercraft)
PWCMW.18 PWC Mooring Whip 18’
PWC up to 750 lbs.
Stow ‘n Go™ Dock Boxes
These fiberglass dock boxes are built tough. With a UV gelcoat finish and the stainless steel lockable latch and hardware, these are sure to hold up in the harshest marine
environments. Our dock boxes incorporate gas shock lifts, which come standard on
all models. These shocks help to keep your lid open on rocking docks and in higher
wind areas and allow for a slower, more controlled closing. These fiberglass molded
dock boxes are also constructed with a smooth interior finish which helps prevent
splinters in your hands when storing or retrieving your boating accessories.
Standard Dock Boxes - Provides a large rectangular space
in which to store all your boating needs.
Stock No.
Description
Height
Width
Depth
#83562
Small
24"
54"
22"
#83552
Medium
24"
72"
23"
#83551
Large
24"
85"
22"
#83553
Deep Small
27"
46"
26"
#83554
Deep Medium
27"
72"
26"
Low-Profile Dock Boxes - Built for large boats or docks.
Stock No.
Height
Width
#83550
Small
Description
20"
40"
19"
#83557
Medium
18"
48"
20"
Standard
Dock
Boxes
Depth
Low
Profile
Box
Top-Seat Dock Boxes - Seat built in for added function.
Stock No.
Height
Width
Depth
#83556
Small
Description
27"
46"
26"
#83555
Large
29"
72"
29"
Triangle Dock Boxes - Fits snugly in that little
Triangle
Dock Box
gusset found on most docks.
Stock No.
Description
#83561
Triangle
Heavy duty stainless steel
lockable latch and hinges
27"
54"
33"
Stow ‘n Go
Dock Boxes
Smooth interior su rface
has no stray glass fibers
that may splinter and
become a source for cuts or
slivers.
Top-Seat
Dock Box
Height Width Depth
Smooth interior surface
is easy to cl ean. No
scrubbing in hard to
reach spots where di rt
and algae like to hide.
Dirt and grime can collect in the pores of the
rough interior surface
making cleaning a difficult task.
Other Dock
Box Brands
Rough surface has many
stray glass fibers that can
splinter and become a
source of cuts and slivers.
Cross Section of Top-Seat Dock Box
Solid wood core is stronger than cardboard and
contains no trapped air making it more resistant
to absorbing water and odors.
Flimsy cardboard core is filled with air pockets that can absorb water and nasty odors.
Stow ‘n Go Dock Boxes
Other Dock Box Brands
Double glass layer resists cracking
and adds strength in critical areas
where hardware is attached.
Single glass layer provides minimal strength and may develop
stress cracks over time.
Gas shocks come
standard on all models.
™
Stow ‘n Go Dock Box Accessories
Dock Box Storage Nets
Available in two sizes to fit most dock boxes, these strong polyester
nets mount easily on the underside of the dock box lids. Keeps lines,
electrical cords, fenders, almost anything neatly organized and up off
the bottom of the box. Complete with screw in type snap fasteners.
Measure the reinforced area on your box lid to determine proper size.
#553
13" x 52" for longer, narrow boxes
#554
18" x 38" for shorter, wider styles
Dock Box Seat Cushion
Available in two sizes to fit Taylor Made Seat-Top dock boxes.
These cushions feature 2" thick urethane foam that won’t absorb
water and covered in our Ultima™ fabric for the best performance
in strength, UV stability and longevity. The underside of the cushion has a non-slip fabric sewn-in to help keep it in place. Available
in Pacific Blue.
#555
Large Cushion fits Box #83555
#556
Small Cushion fits Box #83556
Dock Box Vent
This 2" diameter vent is constructed from high
density polyethylene, and
gives you extra ventilation
to help keep stored items
free from mildew. Installs
simply using a 2" hole saw.
Sold in pairs.
Stock No. #1862
Dock Box Trays
All trays are 12"wide x
6" deep and fit depth
of the box recommended.
Stock No. Description
Fits Models
#83600
Tray (small)
83552
#83605
Tray (large)
83553, 83554, 83556
Pneumatic Lid Lifts
#83610 - 1 Pair, Fits All Models
All Rings Meet USCG Approval
For Both Recreational And Commercial Use
Life Rings
PE
Vinyl Coated Foam
Vinyl Skin
Inspected and tested in accordance with U.S. Coast Guard regulations. All rings
contain unicellular polyurethane foam for buoyancy. Floating polypropylene grab
lines contain UV stabilizers to enhance sunlight resistance. PE and vinyl skin versions feature molded-in becket design, vinyl coated foam versions use sewn beck-
ets to secure grab line. Choose between energy absorbent vinyl skin, vinyl coated
foam, or tough, hard shell polyethylene skin. SOLAS approved models equipped
with reflective tape.
Vinyl Coated Foam Life Ring
Polyethylene Skin Life Ring
White w/White Rope Orange w/White Rope
Stock No.
Stock No.
Buoy
Diameter
Minimum
Buoyancy (lbs.)
White w/White Rope Orange w/Black Rope
Stock No.
Stock No.
Buoy
Diameter
Minimum
Buoyancy (lbs.)
#360
#363
20"
16.5
#567
#569
24"
16.5
#361
#364
24"
16.5
#568
#570
30"
32
#566* †
30"
32
—
#571 ††
30"
32
—
*Vinyl Skin on Solas Model only, with black rope.
† SOLAS approved ring suitable for quick release from the bridge.
†† SOLAS approved.
SOLAS - “Saving of Lives at Sea”
• Reflective tape on 30” diameter ring buoys only.
Life Ring Station
Ring Buoy Rack
Life Ring “J” Hooks
Designed to securely
hold 3" and 4" thick
buoys and adjusts for
20" and 24" diameters. Buoy holder
made from heavy wall
steel and powder coated silver for years of
trouble free service.
Stainless steel fasteners included.
Rugged polyethylene case
houses one 24" ring.
Ring station permanently locates life ring and
protects ring from constant weather exposure.
Bright yellow color for
high visibility. Clear vinyl
cover quickly detaches to
access life ring.
Stock No. #570006
Life Ring/Ring Buoy Letter Kit
Stainless steel “J” hooks designed to hold
ring buoys up on any wall, fence, wheelhouse, etc.
Stock No. #2020
Stock No. #2016
SOLAS Tape Kits
Reflective tape meets SOLAS approval. High
quality marine grade adhesive for maximum
service. Twelve 4" pre-cut pieces in each kit.
Now you can customize your life ring
with our Taylor Made Lettering kit.
Package includes 2" black letters and
numbers (4 ea.) plus symbols.
Constructed from waterproof marine
grade 4 mil vinyl, resistant to fuel,
chemicals, fading and scratching.
Application template included.
Stock No. Description
Stock No.
#600015
#581
12 - 4" pre-cut pieces
Limited Warranty Information - Applicable to All Products
TAYLOR MADE PRODUCTS SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, NOR FOR ANY DAMAGES
OR REMEDIES NOT SPECIFICALLY SET FORTH IN THIS WARRANTY. TAYLOR MADE PRODUCTS SHALL NOT BE LIABLE, IN THE EVENT, FOR
ANY DAMAGES IN EXCESS OF THE COST OF THE PRODUCT. Some states do not allow the exclusion or limitation or consequential damages, so the above
limitation or exclusion may not apply to you. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
SHALL NOT BE EXTENDED BEYOND THE DURATION OF THE EXPRESS WARRANTIES HEREIN. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitation may not apply to you. All potentially defective products must receive a Return Goods Authorization (RGA) # before
they are returned to Taylor Made Products. Products returned without an RGA# will be refused, and the product will be returned to sender. To receive an
RGA#, call us at 1-800-628-5188. All products returned to us MUST be accompanied by a proof of purchase, without exception. Freight on defective products is
the responsibility of the consumer (UPS is the preferred method of returning a product to us). Repaired or replacement products will be shipped back to the consumer freight prepaid. This written warranty is the only warranty expressed or implied, made by Taylor Made Products. No person is authorized to change, add to,
or create any warranty or obligation other than set forth herein. This warranty gives you specific legal rights, and you may also have other rights which vary from
State to State. Freight on returned products is the responsibility of the consumer. Repaired or replacement products will be shipped back to the consumer freight
prepaid.
To obtain service under this warranty, contact Taylor Made Products at the following address:
Taylor Made Products • 65 Harrison St. • Gloversville, NY 12078
518-773-9400 • www.taylormadeproducts.com • [email protected]
® Taylor Made is a registered trademark of the Nelson A. Taylor Co., Inc.