Aral Industrial Lubricants

Transcription

Product Catalog
Aral Aktiengesellschaft
Lubes
from A to Z
Our product catalog provides a convenient overview of
the Aral lubricants product line-up for industrial use –
from our standard selection of top-quality lubricants to
custom-tailored special lubricants for individual problem
solutions.
Overview of Aral Products
Page
Aral 4005 ................................................................................................................... 12
Aral 4010 .................................................................................................................... 12
Aral Alur ..................................................................................................................... 12
Aral Aralub ................................................................................................................ 17
Aral Aralub (NSF-H1) ................................................................................................ 6
Aral Aralux ................................................................................................................ 14
Aral Autin....................................................................................................................... 4
Aral Calibration Fluid ............................................................................................... 4
Aral Deganit ................................................................................................................ 9
Aral Degol ................................................................................................................... 8
Aral Dural .................................................................................................................... 4
Aral Emulgator ......................................................................................................... 17
Aral Inhibitors ........................................................................................................... 17
Aral Eural Chain ........................................................................................................ 5
Aral Eural Comp ........................................................................................................ 5
Aral Eural Gear .......................................................................................................... 5
Aral Eural Grease ...................................................................................................... 6
Aral Eural Hyd ............................................................................................................ 5
Aral Eural Paste ........................................................................................................ 6
Aral Eural SP .............................................................................................................. 5
Aral Farolin ............................................................................................................... 23
Aral Forbex ................................................................................................................ 11
Aral Gelserol Super ................................................................................................ 13
Automotive lubricants can be found in the following brochures:
• Aral Lubricants for Passenger Cars
• Aral Lubricants for Commercial Vehicles and Constructions Machines
Index
Page
Aral Granitol ............................................................................................................... 7
Aral Guttin ................................................................................................................. 10
Aral Inhibitor ............................................................................................................. 17
Aral Isolan ................................................................................................................. 21
Aral Konzentrat ........................................................................................................ 17
Aral Kosmol .............................................................................................................. 21
Aral Kowal ................................................................................................................ 22
Aral Limal .................................................................................................................... 7
Aral Montral ............................................................................................................... 11
Aral Motanol ............................................................................................................ 22
Aral Multidyn ............................................................................................................ 12
Aral Multrol ............................................................................................................... 16
Aral Resilan ............................................................................................................... 13
Aral Ropa ................................................................................................................... 14
Aral Sarol ................................................................................................................... 15
Aral Sulnit .................................................................................................................. 14
Aral Sulnit (Minimum Quantity Cooling Lubricant) ...................................... 15
Aral Sumurol.............................................................................................................. 14
Aral Systemreiniger ................................................................................................ 17
Aral Vitam ................................................................................................................. 10
Aral Vitamol .............................................................................................................. 12
Aral Wisal ................................................................................................................. 23
Product Search Made Easy
To find the right product for your needs please refer to the alphabetical list of product
names on page 2 or the overview of product groups on page 3. The appendix to our
product catalog contains an alphabetical index to provide additional help.
Additional information about our products as well as the latest product and safety spec
sheets are available on the Internet at www.aral-lubricants.com.
Please contact your next Aral contact or Aral sales representative who’ll be glad to answer
any questions about the Aral lubricants program.
The content of this brochure
reflects the technological stateof-the-art at the time of publication. All information is subject to
change.
Overview of Aral Product Groups
Page
Manufacturing and Base Oil Stocks ............................................................... 4
Machine Oils .............................................................................................................. 4
White Oils .................................................................................................................... 4
Food Grades................................................................................................................ 5
Chain Lubricants ....................................................................................................... 5
Compressor Lubricants............................................................................................ 5
Gear Oils ...................................................................................................................... 5
Hydraulic Oils ............................................................................................................. 5
Flushing Fluids ........................................................................................................... 5
Lubrication Greases (NSF-H1) .............................................................................. 6
Mounting Paste ......................................................................................................... 6
Form Oils...................................................................................................................... 7
Gear Oils ..................................................................................................................... 8
Closed-Loop Gear Oils ............................................................................................ 8
High-Performance Gear Oils ................................................................................. 8
Synthetic Gear Oils .................................................................................................. 8
Adhesive Lubricants .............................................................................................. 9
Slide Way Oils ............................................................................................................ 9
Saw Chain Oils .......................................................................................................... 9
Synthetic Saw Chain Oil ........................................................................................ 9
Tempering Oils ....................................................................................................... 10
Hydraulic Oils ......................................................................................................... 10
HL Hydraulic Oils .................................................................................................... 10
HLP Hydraulic Oils ................................................................................................. 10
HLP-D Hydraulic Oils .............................................................................................. 11
HVLP Hydraulic Oils ................................................................................................ 11
HVLP-D Hydraulic Oils ........................................................................................... 11
Biodegradable Synthetic Hydraulic Oils ........................................................... 11
Fire Resistant Hydraulic Oils ................................................................................ 11
Shock Absorber Oils .............................................................................................. 12
Industrial Cleaners ............................................................................................... 12
Refrigerating Machine Oils ............................................................................... 12
Corrosion Protection ............................................................................................ 13
Rust Solvents Oils ................................................................................................... 13
Rust Protection Oils ............................................................................................... 13
Page
Cooling Lubricants, water-immiscible .......................................................... 14
Multi-Purpose Oils .................................................................................................. 14
Machining Oils ......................................................................................................... 14
Grinding Oils ............................................................................................................ 14
Metal Forming Oils ................................................................................................. 14
Stamping Oils .......................................................................................................... 14
Spark Erosion Oils .................................................................................................. 14
Minimum Quantity Cooling Lubricants ........................................................ 15
Cooling Lubricants, water-miscible ............................................................... 15
Synthetic/Boron-free .............................................................................................. 15
Partially Synthetic/Boron- and Amine-free ..................................................... 15
Partially Synthetic/Contains boron and Amines .......................................... 16
Partially Synthetic with Amines ......................................................................... 16
Synthetic Grinding .................................................................................................. 16
Service Products ................................................................................................... 17
Lubricating Greases ............................................................................................. 17
Biodegradable Lubricating Greases ................................................................. 17
Viscous Greases ...................................................................................................... 17
Adhesive Lubricating Greases ............................................................................ 18
High-Pressure Thread Grease ............................................................................ 18
High-Temperature Greases .................................................................................. 18
Heavy Duty Greases .............................................................................................. 19
Special-Purpose Grease, mineral oil base ...................................................... 19
Special-Purpose Greases, synthetic base ....................................................... 19
Low-Temperature Greases/High-Speed Greases ........................................ 20
General-purpose Greases ................................................................................... 20
Transformer Oils and Insulating Oils ............................................................ 21
Turbine Oils ............................................................................................................. 21
Compressor Oils ................................................................................................... 22
Compressor Oils, mineral oil base ................................................................... 22
Compressor Oils, synthetic base ...................................................................... 22
Special-Purpose Compressor Oils .................................................................... 22
Heat-Transfer Oils ................................................................................................ 23
Cylinder Oils ........................................................................................................... 23
Manufacturing and Base Oil Stocks
Product Name
ISO-VG
Viscosity (mm2/s)
Density Pour Point
(g/ml)
15 °C
°C
Flash
Point
°C
40 °C
100 °C
2.5
52.0
1.0
6.4
0.823
0.890
-28
-10
115
210
46.0
79.7
100.8
145.0
4.5
9.0
10.5
16.7
25.0
6.8
9.2
10.9
14.0
1.5
2.3
2.5
3.3
4.6
0.873
0.885
0.882
0.884
0.841
0.864
0.865
0.863
0.867
-15
-12
-12
-12
-24
-18
-12
-12
-12
240
246
258
266
130
160
170
165
208
Aral Autin B
15.0
3.4
0.852
-15
184
Aral Autin PL
Aral Autin SL
15.7
70.6
3.5
8.2
0.853
0.879
-12
-24
200
220
Machine Oils
Aral Calibration Fluid
Aral Dural MD 36
Aral Dural MR 46
Aral Dural MR 68
Aral Dural MR 100
Aral Dural MR 150
Aral Dural SR 5
Aral Dural SR 7
Aral Dural SR 10
Aral Dural SR 15
Aral Dural SR 22
46
68
100
150
5
7
10
15
22
White Oils
Product Description
Test fluid for calibrating Diesel injection pumps.
Paraffin-based machine oil according to DIN 51501, type
L-AN, with special viscosity.
Paraffin-based, DIN 51501, type L-AN. Can be used
under DIN 51501, type L-AN requirements as common
machine oils on lubricating points with total-loss or
circulating lubrication.
Technical white oil FDA (Food and Drug Administration) requirements, § 178.3620 (b). For use in e.g. in
the plastics industry as softener for polymers. Also for
lubricating precision-mechanic machines, equipment
and devices.
Medicinal white oils. Meet special requirements of the
European Pharmacopoeia, the US Pharmacopoeia, the
FDA (Food and Drug Administration) and the German Federal Health Department (BGA). Products are
tasteless, odorless and colorless. For use in lubricating
medical equipment and machines in the food and cosmetics industries. Also used as softener in the plastics
industry and as components of pharmaceutical and
cosmetic products.
Food Grades
Product Name
ISO-VG
Viscosity
(mm2/s)
40 °C
Density
(g/ml)
20 °C
32
220
460
32
220
460
0.83
0.85
0.86
-54
-48
-42
>200
>200
>200
Chain lubricants for the food industry with NSF-H1 registration,
based on synthetic base oil stocks. Meet all FDA quality requirements as defined by 21 CFR 178.3570 guidelines. High oxidative
and thermal stability. High film strength and good corrosion
protection.
46
68
100
46
68
100
0.83
0.84
0.84
-54
-54
-51
248
253
255
Compressor lubricants for the food industry with NSF-H1
registration based on synthetic base oil stocks. Meet all FDA
quality requirements as defined by 21 CFR 178.3570 guidelines.
For lubricating rotary and piston compressors. Excellent aging
and foaming resistance, very good water separation properties,
optimal anti-wear characteristics/EP performance.
68
150
220
460
68
150
220
460
0.84
0.85
0.85
0.86
-57
-57
-51
-45
244
256
258
248
Gear oil for the food industry with NSF-H1 registration based
on synthetic base oil stocks. Meet FDA quality requirements as
defined by 21 CFR 178.3570 guideline. Long life, good viscosity,
excellent foaming resistance and water separation properties,
optimal anti-wear characteristics/EP performance. Colorless,
odorless, tasteless.
15
32
46
68
15
32
46
68
0.82
0.83
0.83
0.84
-57
-57
-57
-57
180
238
252
260
Hydraulic oils for the food industry with NSF-H1-registration
based on synthetic base oil stocks. Meet FDA quality requirements as defined by 21 CFR 178.3570 guideline. Long life, good
viscosity index, excellent foaming resistance and water separation, optimal anti-wear properties/EP performance. Colorless,
odorless and tasteless.
32
32
0.83
-57
252
Flushing fluid for the food industry based on synthetic base oil
stocks. Meets NSF-H1 requirements and FDA quality standards
as defined by 21 CFR 178.3570 guideline. This product is used
for cleaning systems before switching to Aral Eural products.
Chain Lubricants
Aral Eural Chain 32
Aral Eural Chain 220
Aral Eural Chain 460
Compressor Lubricants
Aral Eural Comp 46
Aral Eural Comp 68
Aral Eural Comp 100
Gear Oil
Aral Eural Gear 68
Aral Eural Gear 150
Aral Eural Gear 220
Aral Eural Gear 460
Hydraulic Oils
Aral Eural Hyd 15
Aral Eural Hyd 32
Aral Eural Hyd 46
Aral Eural Hyd 68
Flushing Fluid
Aral Eural SP
Pour Point Flash Point Product Description
°C
°C
The products of the Aral Eural series listed under the
“Food Grades” heading feature NSF-H1 registration
or meet NSF-H1 requirements. These lubricants are
specially designed for use in the food, feed, cosmetics and pharmaceutical industries.
Food Grades (continued)
Product Name
NLGIClass
Lubricating Greases NSF-H1
Base Oil
Viscosity
(mm2/s)
40 °C
Thickener
Dropping
Point
Worked
Penetration
>220
355-385
>220
400-430
>220
310-340
>220
265-295
>250
265-295
Aral Eural Grease EP 0
0
350
Aral Eural Grease EP
00
Aral Eural Grease EP 1
00
350
1
350
Aral Eural Grease
EP 2
Aral Eural Grease
EPF 2
2
350
2
460
spec. AlComplex
spec. AlComplex
spec. AlComplex
spec. AlComplex
Al-Complex
1-2
3000
PTFE
None
300
Aral Aralub 4822
2
1100
Al-Complex
>250
265-295
Aral Aralub 4823
3
ca. 1000
Gel/ Solid
Lubricants
>240
220-250
2
275
Inorganic
Solids
None
265-295
Aral Aralub SI 5002
Mounting Paste
Aral Eural Paste
Labeling Product Description
under
DIN 51502
GPFHC
0 P-40
GPFHC
00 P-40
KPFHC
1 P-40
KPFHC
2 P-40
KPF
2 K-20
Viscous greases for the food industry with synthetic
base oil stocks and NSF-H1 registration. Colorless,
odorless and tasteless. Harmless. Operating temperature range: -40°C to +160°C.
Multi-purpose greases for the food industry with
synthetic base oil stocks and NSF-H1 registration. Colorless, odorless and tasteless. Harmless. Operating
temperature range: -40°C to +150°C.
Special lubricating grease for the food and feed
industries based on medicinal white-oil with NSFH1 registration. For use in lubricating friction and
anti-friction bearings, incl. with increased bearing
temperatures, in high stress and wet environments.
Operating temperature range: -20°C to +140°C, shortterm +180°C.
MSIF1-2 High-temperature lubricating grease for the food
U-40
industry with silicone oil base. Meets NSF-H1
requirements. Extremely high thermal and chemical
stability. For use in slow-running bearings, e.g. rollers
on baking machines. Operating temperature range:
-40°C to +260°C, short-term to +300°C.
KPF
White aluminum complex saponified grease based
2 K-20 on medicinal white oil with EP additives and solid
lubricants, with NSF-H1 registration. Suitable for
use in friction and antifriction bearings, also with
increased bearing temperature, under high stress and
in wet environments. For use in the food and fittings
industries. KTW (plastics and potable water) approval.
Operating temperature range: -20°C to +130°C, shortterm +180°C.
MSI 3 P-30 Fitting and food lubricant with silicone-oil base.
Tested according to NSF international standard 61.
British standard, WRAS approval. KTW (plastics and
potable water) approval. For use in water fittings for
hot and cold water as well as for equipment and
rubber seals in the brewery and beverage industries.
Operating temperature range: -30°C to +160°C.
MPGF2
U-40
Metal-free mounting paste for use up to +1,200°C
with NSF-H1 registration. Starting at 200°C the pastetype lubrication changes into dry lubrication. Used
to prevent sticking of bolts, hinges and screw-type
connections.
Form Oils
Product Name
Viscosity (mm2/s)
20 °C
40 °C
Density
(g/ml)
15 °C
Aral Granitol A
Aral Granitol B
Aral Granitol C
Aral Granitol E
6.3
7.7
18.5
18.0
3.8
4.2
8.8
9.5
0.828
0.860
0.865
0.865
-15
< -35
-21
-12
128
116
152
140
Aral Granitol W
100.0
–
0.920
–
–
Aral Limal 36
70.0
50.0
0.918
-25
330
Pour Point
Flash Point Product Description
°C
°C
Special form oil for all types of panels (absorbent,
non-absorbent and plastic coated), for use in the
construction industry. Suitable for manufacturing all
types of concrete parts, including exposed concrete.
Allows steam tempering.
Water-miscible special form oil for all types of construction panels and shapes, for use in the construction industry. Mix with water at 1:10 to 1:20 ratio.
Spraying oil/form oil with rapeseed base for use in
various industries (e.g. conveyor belts in the food
industry).
Gear Oils
Product Name
ISO-VG
Density
(g/ml)
15 °C
100
150
220
320
460
680
0.878
0.887
0.888
0.894
0.899
0.904
-12
-15
-15
-12
-12
-9
270
284
290
297
300
288
32
46
68
100
150
220
320
460
680
100
150
220
320
460
680
100
220
320
460
680
1200
0.869
0.874
0.881
0.883
0.885
0.898
0.901
0.905
0.913
0.888
0.892
0.897
0.895
0.902
0.905
0.887
0.893
0.895
0.898
0.902
0.917
-27
-24
-30
-18
-12
-15
-9
-18
-12
-24
-21
-15
-15
-9
-9
-27
-15
-12
-9
-6
-9
218
234
242
246
282
274
298
300
308
225
245
250
250
255
255
226
248
268
270
284
260
FZG 10
FZG > 12
FZG >12
FZG >14
FZG >14
FZG >14
FZG >14
FZG >14
FZG >14
FZG >12
FZG >14
FZG >14
FZG >14
FZG >14
FZG >14
FZG >12
FZG >12
FZG >12
FZG >12
FZG >12
FZG >12
Silicone-/zinc-free high-performance gear oils for closedloop transmissions. Excellent antiwear properties in
mixed friction areas. Perfect for lubricating bearings.
The FAG-FE 8 test documented wear of less than 5 mg,
making it the best product in the test. Aral Degol BG 68
through Aral Degol BG 460 all feature SEB No. 181 226
approval. CLP gear oils as defined by DIN 51 517-3.
Aral Degol PAS 150
Aral Degol PAS 220
Aral Degol PAS 320
Aral Degol PAS 460
150
220
320
460
0.872
0.880
0.885
0.893
-51
-51
-48
-39
222
190
192
220
FZG >14
FZG >14
FZG >14
FZG >14
Aral Degol GS 150
Aral Degol GS 220
Aral Degol GS 320
Aral Degol GS 460
Aral Degol GS 680
Aral Degol GS 1000
Aral Degol GS 1500
Aral Degol BAB 68
Aral Degol BAB 100
Aral Degol BAB 220
Aral Degol BAB 460
150
220
320
460
680
1000
1500
68
100
220
460
1.000
1.000
1.000
1.000
1.000
1.080
1.080
0.930
0.935
0.935
0.938
-45
-45
-42
-39
-36
-36
-9
-39
-39
-39
-33
236
280
280
285
292
285
290
290
290
300
300
FZG >12
FZG >12
FZG >12
FZG >12
FZG >12
FZG >12
FZG >12
FZG >12
FZG >12
FZG >12
FZG >12
Fully synthetic zinc-free EP gear oils with polyalpha
olefin base and a very high VI >140, for low/high thermal
stress and danger of micro pitting. Micro-pitting test
FVA 54, failure load in excess of 10. CLP-HC gear oils as
defined by DIN 51 517-3.
Fully synthetic zinc-free EP gear oils with poly-glycol
base with very high VI >200, for high thermal and mechanical stress and danger of micro pitting. Micro-pitting
test FVA 54, failure load in excess of 10. Suitable for use
in worm gears for reducing power loss. CLP-PG gear oils
as defined by DIN 51 517-3.
Aral Degol ESG 100
Aral Degol ESG 220
Aral Degol ESG 320
Aral Degol ESG 460
100
220
316
458
0.854
0.869
0.874
0.871
-45
-45
-45
-39
230
230
270
275
FZG>12
FZG>12
FZG>12
FZG>12
Closed-Loop Gear Oils
Aral Degol CL 100 T
Aral Degol CL 150 T
Aral Degol CL 220 T
Aral Degol CL 320 T
Aral Degol CL 460 T
Aral Degol CL 680 T
High-Performance Gear Oils
Aral Degol BG 32
Aral Degol BG 46
Aral Degol BG 68
Aral Degol BG 100
Aral Degol BG 150
Aral Degol BG 220
Aral Degol BG 320
Aral Degol BG 460
Aral Degol BG 680
Aral Degol BG 100 plus
Aral Degol BMB 100
Aral Degol BMB 220
Aral Degol BMB 320
Aral Degol BMB 460
Aral Degol BMB 680
Aral Degol BMB 1200
Synthetic Gear Oils
Pour Point Flash Point
°C
°C
FZG-Test
Product Description
Silicone-/zinc-free circulating gear oils with good aging
resistance, corrosion protection and optimal demulsification properties. Approved according to SEB No. 181 225.
CL gear oils as defined by DIN 51 517-2.
Silicone-/zinc-free high-performance gear oils for industrial use. For high-stress transmissions running at high
temperatures with danger of micro pitting. Micro-pitting
test FVA 54, failure load in excess of 10. CLP gear oils as
defined by DIN 51 517-3.
Silicone-/zinc-free high-performance gear oils with solid
lubricant additives for highly stressed transmissions,
especially for tough operating conditions with strong
impact or vibration loads and danger of micro pitting.
Micro-pitting test FVA 54, failure load in excess of 10.
Good aging resistance and antiwear properties. CLP-F
gear oils as defined by DIN 51 517-3.
Synthetic, zinc-free EP gear oils with ester base and very
high VI >180, biodegradable, for highly stressed industrial
transmissions and danger of micro pitting. Micro-pitting
test FVA 54, failure load in excess of 10. CLP-E gear oils
as defined by DIN 51 517-3.
Special fully-synthetic EP gear oil with PAO base. Offers
excellent anti-wear protection, security against galling
and a especially advantageous friction performance.
Micro-pitting test FVA 54, failure load in excess of 10.
CLP-HC gear oils as defined by DIN 51 517-3.
Adhesive Lubricants
Product Name
Viscosity (mm2/s)
40 °C
100 °C
Density
(g/ml)
15 °C
Aral Deganit B 68
Aral Deganit B 100
Aral Deganit B 150
Aral Deganit B 220
Aral Deganit BW 68
Aral Deganit BW 100
Aral Deganit BW 220
68
100
154
220
68
100
220
9.0
11.0
15.5
19.0
9.0
11.0
19.0
0.880
0.886
0.890
0.894
0.881
0.887
0.894
-27
-27
-12
-21
-23
-21
-18
210
212
248
224
228
232
237
Aral Deganit BWX 68
Aral Deganit BWX 220
68
220
9.0
18.7
0.877
0.890
-9
-9
244
248
Aral Deganit BO 68
Aral Deganit BO 220
68
220
8.8
19.3
0.884
0.894
-21
-15
240
220
Aral Deganit 4035
248
21.0
0.894
-15
260
Aral Deganit KB 370
370
25.0
0.904
-12
260
Aral Deganit S 100
100
10.0
0.930
-24
230
Aral Deganit BA
60
14.0
0.920
-27
280
220
21.0
0.920
-33
>230
Slide Way Oils
Saw Chain Oils
Synthetic Saw Chain Oil
Aral Deganit HT 260
°C
°C
Aging-resistant special adhesive oils, type CGLP as defined by DIN 51502 with excellent adhesion performance.
Minimizes friction between slide ways and guides, and
prevents stick-slip-motion.
Adhesive oils, type CGLP as defined by DIN 51502 with
excellent demulsification properties. For lubricating slide
ways which can come in contact with water-miscible
cutting fluids. Prevents mixing with water-miscible
cutting fluids.
Adhesive oils, type CGLP as defined by DIN 51502 with
excellent demulsification and adhesion properties. For
lubricating slide ways which can come in contact with
water-miscible cutting fluids. Prevents mixing with watermiscible cutting fluids.
Aging-resistant special adhesive oils, type CGLP as defined by DIN 51502 with excellent adhesive properties. For
lubricating slide ways, also suitable for use as hydraulic
oil as well as for lubricating bearings and gears.
Silicone- and chlorine-free slide way oils with selected
high-pressure additives, safety oil for most extreme
stress. Recommended by UNIONGERA, manufacturer of
heavy-duty equipment.
Slide way oil for operations under heavy loads. Especially
suitable for lubricating slide ways under impact-type
stress or under multi-directional loads as well as for
lubricating spindles, stands and brackets.
Partially synthetic saw chain oil for lubricating and
cooling chainsaws.
Environmentally friendly saw chain oil based on fully
biodegradable vegetable oils. No mineral oil content.
For use in chainsaws. Meets RAL-UZ 48 requirements
and carries the “Blue Angel” label for environmental
friendliness.
Fully synthetic high-temperature chain oil with ester base
and friction-reducing high-performance additives. For
use in lubricating drying and tensioning frames in the
textile industry, chains in paint and drying plants and
other machine components under high thermal stress.
Operating temperature range up to +250°C, short-term
temperature peaks: +280°C
Tempering Oils
Product Name
Viscosity
(mm2/s)
40 °C
Density
(g/ml)
15 °C
Pour Point
°C
°C
Aral Guttin BH 25 SN
44
0.875
-30
226
Aral Guttin BS
Aral Guttin BX
Aral Guttin VM 48
24
52
10
0.865
0.880
0.975
-10
-10
-18
190
205
15
Aral Guttin VM 75
22
0.869
-12
190
Viscosity
(mm2/s)
40 °C
Density
(g/ml)
15 °C
Pour Point
°C
Aral Vitam UF 46
46
0.873
-27
238
Aral Vitam 4057
16
0.848
-6
125
Aral Vitam FF 46
46
0.877
-24
244
Aral Vitam GF 10
Aral Vitam GF 22
Aral Vitam GF 32
Aral Vitam GF 46
Aral Vitam GF 68
Aral Vitam GF 100
Aral Vitam GX 10
Aral Vitam GX 32
Aral Vitam GX 46
Aral Vitam GX 68
Aral Vitam MW 46
10
22
32
46
68
100
10
32
46
68
46
0.854
0.862
0.871
0.877
0.883
0.887
0.849
0.873
0.878
0.883
0.878
-33
-21
-24
-24
-24
-18
-33
-30
-27
-27
-24
170
210
224
244
258
272
170
224
232
237
236
Aral Vitam 3580
27
0.860
-39
140
Special bare tempering oil with excellent aging resistance for
tempering all types of alloyed steels.
High-quality tempering oils with excellent oxidation stability for
tempering cementation steel, heat-treated steel and tool steel.
High-performance tempering oil with extremely high quenching properties. Predominantly for tempering various alloys of
construction and tool steels.
High-performance tempering oil with extremely high quenching properties for use in open and closed tempering
machines. Especially for tempering hardened and tempered
cementation steel and machining steel. High thermal stability
and aging resistance.
Hydraulic Oils
Product Name
HL Hydraulic Oils
HLP Hydraulic Oils
10
°C
Multi-purpose HL hydraulic oil. Meets DIN 51 524-1 requirements.
Special hydraulic fluid for oil hydraulics on aluminum rolling
mills. Burns up residue-free.
Finely filtered zinc-free HLP hydraulic oil. Meets DIN 51 524-2
requirements. Very high purity, good demulsification properties, good aging resistance, corrosion protection and anti-wear
properties.
Zinc-free HLP hydraulic oil meets DIN 51 524-2 requirements.
Good demulsification properties, good aging resistance, corrosion protection and anti-wear properties.
HLP hydraulic oils with zinc content. Meet DIN 51 524-2
requirements. Good demulsification properties, good aging
resistance, corrosion protection and anti-wear properties.
Zinc-free HLP hydraulic oil. Meets DIN 51 524-2 requirements.
Good demulsification properties, good aging resistance, corrosion protection and anti-wear properties. Excellent “Brugger
Value” Hoher Bruggerwert > 40 N/mm2.
HLP hydraulic oil for electro-hydraulic engines. Meets DIN 51
524-3 requirements. Very high VI = 260.
Hydraulic Oils (continued)
Product Name
Viscosity
(mm2/s)
40 °C
Density
(g/ml)
15 °C
Pour Point
°C
Aral Vitam DE 10
Aral Vitam DE 22
Aral Vitam DE 32
Aral Vitam DE 46
Aral Vitam DE 68
Aral Vitam DF TOP 46
Aral Vitam DF TOP 68
10
22
32
46
68
46
68
0.854
0.864
0.872
0.878
0.883
0.878
0.883
-30
-21
-24
-24
-24
-30
-24
164
214
226
232
258
232
250
Aral Vitam XR 46
46
0.874
-21
226
Aral Vitam 4243
46
0.877
-33
234
Aral Vitam HF 32
Aral Vitam HF 46
32
46
0.870
0.874
-42
-45
202
216
Aral Vitam HX 46
46
0.862
-33
236
Aral Vitam H 540
37
0.888
-60
125
Aral Vitam 3580
27
0.860
-39
140
46
68
0.874
0.878
-45
-45
208
218
Zinc-free HVLP-D hydraulic oils as defined by DIN 51 524-3
with a very high VI and excellent dispersing and deterging
properties. Excellent viscosity-temperature characteristics allow
use in diverse applications. Especially suitable for hydraulic
systems operating in a wide range of temperatures and e.g. in
machine tools with possible water contamination.
Biodegradable synthetic hydraulic fluid, type HEPG, VDMA
24568. Not miscible with mineral oil.
Biodegradable synthetic hydraulic fluid, type HEES, VDMA
24568.
Biodegradable synthetic hydraulic fluid, type HETG, VDMA
24568.
Biodegradable synthetic hydraulic fluid, type HEES, VDMA
24568. With Linde approval.
HLP-D Hydraulic Oils
HVLP Hydraulic Oils
HVLP-D Hydraulic Oils
Aral Vitam VF 46
Aral Vitam VF 68
Biodegradable Synthetic Hydraulic Fluids
°C
Aral Vitam BAF 46
46
1.125
-30
180
Aral Vitam EHF 22
Aral Vitam EHF 46
Aral Forbex R 32
22
46
36
0.905
0.923
0.921
-21
-36
-30
260
280
285
Aral Forbex SE 46
46
0.950
-39
270
1.070
-40
None
Fire Resistant Hydraulic Fluids
Aral Montral 44
46
Zinc-free HLP-D hydraulic oils as defined by DIN 51 524-2
with excellent deterging/dispersing properties and anti-wear
protection. For use in machine tools and hydraulic systems
with possible water contamination.
Zinc-free, highly filtered HLP-D hydraulic oil as defined by DIN
51 524-2 with a very high degree of purity, dispersing and
deterging properties and an excellent anti-wear protection. For
use in hydraulic installations under difficult conditions.
Zinc-free, red HLP-D hydraulic oil as defined by DIN 51 524-2
with excellent dispersing and deterging properties and good
anti-wear protection. For use in machine tools and hydraulic
systems with possible water contamination.
Zinc-free HLP-D hydraulic oil as defined by DIN 51 524-2
with excellent dispersing and deterging properties and good
anti-wear protection. For use in machine tools and hydraulic
systems with possible water contamination. High “Brugger
Value” 50 N/mm2.
Zinc-free HVLP hydraulic oils with very high VI Meet DIN 51
524-3 requirements. Excellent viscosity-temperature characteristics allow use in diverse applications. Especially suitable for
hydraulic systems operating in a wide range of temperatures.
HVLP hydraulic oil with zinc content and very high VI. Meet
DIN 51 524-3 requirements. Excellent viscosity-temperature
characteristics allow use in diverse applications. Especially
suitable for hydraulic systems operating in a wide range of
temperatures.
Special hydraulic oil with excellent low temperature characteristics. Approved by BWB 9159-0035 NATO H-540.
HVLP hydraulic oil for electro-hydraulic pecking motors. Corresponding to DIN 51 524-3. With high VI=260.
Fire resistant hydraulic fluid type HFC. Approved in accordance
with the 7th Luxemburg Report by the European Coal and
Steel Industry.
11
Hydraulic Oils (continued)
Product Name
Viscosity
(mm2/s)
40 °C
Density
(g/ml)
15 °C
Pour Point
°C
Aral Vitamol 1010
Aral Vitamol 3865
Aral Vitamol 4004
15
9
16
0.899
0.867
0.881
-50
-48
-57
152
124
134
Aral Vitamol ZH-M
16
0.865
-48
147
Aral Vitamol V 10
10
0.834
-48
166
Aral Vitamol 4517
29
0.866
-59
205
Aral Vitamol 4811
30
0.833
-45
162
Shock Absorber Oils
°C
Shock absorber oils proven for many years, used predominantly in the automotive industry.
Special-purpose shock absorber oil with especially high VI =
202.
Hydraulic oil for passenger car leveling systems, DaimlerChrysler Service Bulletin 343.
Biodegradable synthetic shock absorber oil with very high VI
= 182.
Synthetic shock absorber oil with PAO (poly-alpha olefin) base
and very high VI = 168.
Synthetic shock absorber oil with PAO (poly-alpha olefin) base
and very high VI = 262.
Industrial Cleaners
Product Name
Product Description
Aral 4005
Halogen-free industrial cleaner with hydrocarbon base. For general-purpose industrial degreasing and cleaning. This custom-refined product is physiological harmless and can be filtered with all common type of filtration systems. Also suitable
for use as abrading oil.
Halogen-free, relatively fast evaporating degreaser with hydrocarbon base. Good cleaning and solving properties. Perfectly
suited for use as immersion bath degreaser. Stable flash point in the A III area. Harmless.
Halogen-free, rapidly evaporating degreaser with hydrocarbon base. Good cleaning and solving properties. Excellent
immersion bath degreaser. Despite its relatively low evaporation index Aral Multidyn IC 360 features a stable flash point in
the A III area, guaranteeing safe handling. Harmless.
Aral 4010
Aral Multidyn IC 360
Refrigerating Machine Oils
Product Name
ISO-VG
Aral Alur EE 32
Aral Alur EE 46
Aral Alur EE 68
32
46
68
12
Viscosity (mm2/s)
40 °C
100 °C
31.3
45.2
66.6
4.8
5.8
7.1
Pour Point
°C
-45
-45
-36
°C
190
190
211
Naphthene-based refrigerating machine oils as defined by
DIN 51503, type KC, with very high thermal stability and
very good low-temperature viscosity. Lubrication of coolant
compressors operating with ammonia or halogenated hydrocarbons.
Corrosion Protection
Product Name
Rust Solvents
Aral
Gelserol Super
Viscosity
(mm2/s)
40 °C
Density
15 °C
Flash Point
°C
Hazard
Class
Evapora
tion Time
in min.
Film
Strength
in µm
3.3
0.825
> 59 1)
A III
not determined
3
fatty,
very thin,
not grip
resistant
Rust solvent with good corrosion protection
properties. General-purpose use as rust
solvent and corrosion protection in all areas
of industry incl. mining, in industrial machines
and vehicle repair shops.
fatty,
very thin,
not grip
resistant
waxy,
very thin,
not grip
resistant
–
Barium-free dewatering fluid with temporary
corrosion protection. Non-aromatic solvent
base. Low odor.
Rust Protection Oils
Film Type Product Description
Aral Resilan DCL
2.3
0.784
> 58 1)
A III
80
3
Aral Resilan LD
1.4
0.802
> 40 1)
A II
30
2
2.3 3)
0.814
> 61 1)
A III
>100
2
Aral Resilan M 7
9.7
0.857
165 2)
None
–
4
oily, light,
not grip
resistant
Aral Resilan
M 15
18.3
0.864
190 2)
None
–
7
oily, light,
not grip
resistant
Aral Resilan
M 46
46.4
0.867
190 2)
keine
–
10
193.0 3)
0.869
> 40 1)
A II
–
36
oily, light,
not grip
resistant
brown,
waxy, grip
resistant
Aral Resilan
LD III
Aral Resilan WA
Dewatering fluid with temporary corrosion protection, based on an A II test gasoline, faster
solvent evaporation.
Barium-free dewatering fluid with temporary
corrosion protection. Non-aromatic solvent
base.
Barium-free multi-purpose corrosion protection
oil for preserving small and miniature parts as
well as for interim preservation of parts in the
manufacturing process.
Barium-free multi-purpose corrosion protection oil for preserving small parts, interiors of
devices and small machines and for interim
preservation.
Barium-free multi-purpose corrosion protection
oil for preserving semi-finished products, tools,
hydraulics and smaller transmissions.
Corrosion protection oil with waxy, grip-resis
tant protective film. Especially suitable for
long-term preservation of machine tools,
equipment and spare parts, also for overseas
shipping.
1) Flash point AP according to DIN 51755
2) Flash point COC according to DIN ISO 2592
3) Viscosity at 20°C
13
Cooling Lubricants, water-immiscible
Product Name
Multi-Purpose Oils
Aral Sumurol CM 5
Aral Sumurol CM 10
Aral Sumurol CM 22
Aral Sumurol CM 32
Aral Sumurol CM 46
Aral Sulnit KU
Aral Sulnit KT
Aral Sulnit KS
Aral Sulnit KR
Aral Sulnit K
VisFlash Lubri- EP- Ad- Active S Suitable Product Description
cosity Point °C cation ditive
for Non(mm2/s)
Ferrous
40 °C
Metals
5.0
10.0
22.0
32.0
46.0
2.0
6.2
25.0
32.0
40.0
120
164
214
225
232
90
130
190
216
210
–
–
–
–
–
–
+
+
+
+
–
–
–
+
+
–
–
+
+
+
no
no
no
no
no
no
no
no
no
no
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
Multi-purpose oils especially for machining processes. Also meet
HLP-D specifications for hydraulic oils. With anti-mist additives.
Aral Sulnit HM-B
Aral Sulnit HM
Aral Sulnit HM 9
Aral Sulnit FR 6
Aral Sulnit FR 12
Aral Sulnit FR 25
Aral Sulnit FR 40
Aral Sulnit UT
Aral Sulnit UM
Aral Sulnit UZ
Aral Sulnit US 20
Aral Sulnit US 40
Aral Sulnit UP
Aral Sulnit UR
Aral Sulnit RT 12
3.2
4.3
9.0
6.0
11.0
25.0
40.0
13.0
13.0
24.0
23.0
41.0
25.0
28.0
12.0
105
132
152
130
146
185
205
170
164
172
205
230
176
195
175
++
++
++
+
+
+
+
++
++
++
+
+
+++
+++
++++
–
–
–
++
++
++
++
++
++
++
+
+
++
+++
++++
no
no
no
no
no
no
no
yes
yes
yes
yes
yes
no
yes
yes
yes
yes
yes
yes
yes
yes
yes
no
no
no
no
no
yes
no
no
General-purpose cutting oil for various materials, e.g. for precision
lathes and drills and slot milling machines. Sulnit HM 9: proven
product for machining hard metals and for grinding C-steels.
Suitable for machining nuts and screws. Sulnit FR 25 and FR 40 can
also be used for heavy-duty machining processes, such as thread
cutting, hobbing, deep-hole drilling and non-cutting metal forming.
Aral Sulnit RT 28
28.0
175
++++
++++
yes
no
Aral Sulnit RT 68
68.0
180
++++
++++
yes
no
For use e.g. for deep hole drilling of high-strength materials as well
as for toughest free-cutting processes.
Special broaching oil for e.g. toughest broaching of high-strength
materials.
Special forming oil, e.g. for deep drawing and cold extrusion.
7.0
25.0
14.0
11.0
12.0
160
195
182
160
175
–
+
+
+
+++
–
+
+++
–
+
no
no
no
no
yes
yes
yes
yes
yes
no
Grinding oil with HC base oil stock, low vaporization.
All-purpose grinding oil.
All-purpose high speed grinding oil.
Products with Kapp approval. Perfect for high-speed grinding of
profiles, threads and grooves.
55.0
122.0
64.0
120.0
214
176
180
176
++
++
++
++
+++
+++
++++
++++
no
no
yes
yes
yes
yes
no
no
For use in stamping, deep drawing and cold extrusion of steel and
non-ferrous metals.
For use in stamping, deep drawing and cold extrusion of steel.
Enhanced performance. Not for non-ferrous metals.
1.7
63
+
–
no
yes
Residue-free stamping oils for stamping, bending and deep drawing
of thin sheet metal.
2.1
3.7
108
117
–
–
–
–
no
no
yes
yes
Suitable for finishing work and light roughing work.
Suitable for roughing work.
Machining Oils
Grinding Oils
Aral Sulnit CC 5
Aral Sulnit UN
Aral Sulnit UN-X
Aral Sulnit 7798
Aral Sulnit UN-K
Metal Forming Oils
Aral Ropa 4231
Aral Ropa 4232
Aral Ropa 4431
Aral Ropa 4432
Stamping Oils
Aral Ropa RS 11
Spark Erosion Oils
Aral Aralux FE 2
Aral Aralux RP
Multi-purpose oils with enhanced lubrication properties for the
general machining of steel, cast metal and non-ferrous metals up to
medium standards.
For use as deep hole drilling oil for highly alloyed steels.
Special cutting oil e.g. for deep hole drilling, profile mills and for
tough freecutting processes.
Special cutting oil, e.g. for gear machining and free-cutting processes.
For use as e.g. broaching oil for broaching highly alloyed steels.
Spark Erosion Oils: see also Aral 4005 in the “Industrial Cleaners” category on page 12.
Lubrication: – : none
EP additive: – : very low
14
+ : low
+ : low
++ : medium
++ : medium
+++ : high
+++ : high
++++ : very high
++++ : very high
Minimum Quantity Coolling Lubricant
Product Name
Viscosity
(mm2/s)
40 °C
Aral Sulnit MMS 32
Pour Point °C Flash Point °C Product Description
36
-33
> 280
Biodegradable high-performance lubricant with native ester base. Especially
suitable for sawing, incl. large saws and for saws exposed to the environment.
Also for grinding and drilling as well as for machining non-ferrous metals.
Colling Lubricants, water-miscible
Product Name
Mineral
Oil
Content
(%)
Synthetic/Boron-free
Aral Sarol 700 EP
0
pHValue
(%)1)
Lubri
cation
EPAdditive
Steel
9.1
yes
yes
+++
+–
+++
++
Ultra-performance general-purpose cooling lubricant
with synthetic ester base. Boron-free, nitrite-free,
chlorine-free and silicone-free.
Boron- and amine-free partially synthetic generalpurpose cooling lubricants. Special advantages for
machining aluminum. Nitrite-, chlorine- and siliconefree. Very high stability in hard water.
Boron-free and amine-free partially synthetic generalpurpose cooling lubricant with especially pronounced
corrosion protection properties. Nitrite, chlorine-free
and silicone-free.
Boron-free and amine-free partially synthetic cooling
lubricant. Special advantages for machining highly
alloyed steels. Nitrite-, chlorine- and silicone-free.
Boron- and amine-free partially synthetic general-purpose cooling lubricant for machining steel.
Boron- and amine-free partially synthetic generalpurpose cooling lubricant. Special advantages for
machining aluminum. Suitable for soft water quality.
Nitrite-, chlorine- and silicone-free.
Boron- and amine-free partially synthetic generalpurpose cooling lubricants. Special advantages for
machining aluminum. Nitrite-, chlorine- and siliconefree.
Partially Synthetic/Boron-free and Amine-free
Materials2)
Product Description
Cast Alumi- Nonnium Ferrous
Metal
Aral Sarol 330
48
9.1
yes
yes
+++
++
+++
++
Aral Sarol 350 EP
42
9.1
no
no
++
++
++
+
Aral Sarol 450 EP
29
9.1
yes
yes
+++
++
+
–
Aral Sarol 467 EP
52
9.1
yes
yes
+++
++
++
+
Aral Sarol 470 EP
44
9.1
yes
yes
+++
++
+++
++
Aral Sarol 471 EP
Aral Sarol 474 EP
Aral Sarol 500 EP
48
45
48
9.1
9.1
9.2
yes
yes
yes
yes
yes
yes
+++
+++
+++
++
++
++
+++
+++
++
++
++
+
1)
2)
Level of concentration: 5%
Machining: – : not recommended
+ – : limited suitability + : suitable ++ : good suitability +++ : excellent suitability
15
Colling Lubricants, water-miscible (continued)
Product Name
Mineral
Oil
Content
(%)
pHValue
(%)1)
Lubri
cation
EPAdditive
Partially Synthetic/With Boron and Amine Content
Steel
Materials2)
Product Description
Cast Alumi- Nonnium Ferrous
Metal
Aral Sarol 335 S
31
9.3
yes
yes
++
+++
+
+
Aral Sarol CI 100
38
9.0
yes
no
++
+++
+ –
+
Aral Sarol CI 100
Plus
40
9.0
yes
no
+++
+++
+++
+
Aral Sarol 4390
35
9.2
no
no
++
+++
+ –
+
Aral Sarol 435 EP
32
9.0
yes
yes
+++
++
+
+
Aral Sarol 445 EP
32
9.1
yes
yes
+++
++
+ –
+ –
Aral Sarol 460 EP
48
9.1
yes
yes
++
+
+++
++
no
yes
+
+
+
+++
Partially synthetic special cooling lubricant for machining non-ferrous metals. Boron-, nitrite-, chlorine- and
silicone-free.
Synthetic grinding solution for the grinding of steel
and cast iron, very good foaming attitude and good
corrosion protection. Nitrite-, chlorine- and siliconefree.
Synthetic special grinding solution for soft water as
well as for high-pressure grinding. Also for sectional
grinding. Extremely foaming resistant. Nitrite-, chlorine- and silicone-free.
Special grinding solution with EP additive, also for
use as additive for pressurized water in water hydraulic systems. Nitrite-, chlorine- and silicone-free.
Amine-free general-purpose grinding solution. Special
advantages for machining hard metals and NE-metals. Nitrite-, chlorine- and silicone-free.
Partially Synthetic/With Amine Content
Aral Sarol NFM
73
9.2
Synthetic Grinding Solutions
Aral Multrol G 100
0
9.1
B/A
+++
+++
+ –
+ –
+
Aral Multrol G 200
0
9.3
B/A
+++
+++
+ –
+ –
+
Aral Multrol PWZ
200
0
9.2
–/A
+++
++
++
+
++
Aral Multrol CC 100
0
9.2
B/ –
++
++
+
+++
+++
1)
2)
Level of concentration: 5%
Machining: – : not recommended
16
Partially synthetic general-purpose cooling lubricant
with boron and a mine content for normal to medium
chipping, especially suitable for soft water qualities.
Sarol CI 100: Partially synthetic general-purpose
cooling lubricant with boron and amine content for
normal to medium chipping of steel, special advantages at cast iron machining.
with boron and amine content. Special advantages
for machining cast metal and aluminum. Nitrite-,
chlorine- and silicone-free.
with boron and amine content. Good corrosion protection and biological stability. Nitrite-, chlorine- and
silicone-free.
with boron and amine content. For tough metal cutting, incl. highly alloyed steels. Nitrite-, chlorine- and
silicone-free.
with boron and amine content for heavy chipping
even of high-alloyed steel. Nitrite-, chlorine- and
silicone-free.
with boron and amine content for heavy chipping,
special advantages at aluminium machining.
+ – : limited suitability + : suitable ++ : good suitability +++ : excellent suitability
Service Products
Product Name
Product Description
Aral Emulgator 851
Amine- and boron-free emulsifier package. Stabilizes highly aged and instable cooling lubricant emulsions and
improves EP effectiveness. For emulsifying foreign-oil contamination.
Mineral oil-free anti-foaming agent, especially used for follow-up anti-foaming of cooling lubricant emulsions and
solutions.
Water-soluble inhibitor for improving non-ferrous metal tolerance and for preventing cobalt dissolution during hard
metal processing.
Amine-free concentrate for increasing alkalinity based on watery potassium carbonate lye, with added potassium
borates. Increases pH-value and stabilizes coolant lubricants emulsions and solutions.
Synthetic, chlorine- and nitrite-free water-miscible clear grinding solution and corrosion protection agent. Contents no
boric acid or secondary amines.
Mineral oil-, amine- and boron-free additive for cooling lubricant emulsions. Improves EP effectiveness.
System cleaner for cleaning dirty emulsion systems. Removes microbial contamination from the circulation system.
Suitable for cooling lubricants with and without mineral oil content.
Aral Entschäumer 887
Aral Inhibitor 812
Aral Konzentrat 824
Aral Konzentrat 871
Aral Konzentrat 884
Aral Systemreiniger M
Lubricating Greases
Product Name
Labeling
under
DIN 51502/
DIN 51825
Thick
ener
NLGI
Class
Biodegradable Lubricating Greases
Base Oil
Viscosity
40 °C
(mm2/s)
Service Dropping Worked Product Description
Tempera- Point (°C) Penetration
ture
DIN ISO (0,1 mm)
(°C)
DIN ISO
2176
from to
2137
Aral Aralub
BAB RC 1
KE 1
E-20
Calcium
1
36
-20
80
(110)
ca. 150
310-340
Aral Aralub
BAB EP 0
KPE 0
K-30
Lithium
0
200
-35
120
170
35-385
Aral Aralub
BAB EP 2
KPFE 2
K-30
Lithium
2
100
-30
120
185
265-295
Aral Aralub
BAB SLC-SP 2
KPFE 2
K-30
LithiumCalcium
2
110
-30
120
170
265-295
Lithium
00
105
-30
120
>170
400-430
LithiumCalcium
000
40
-30
80
–
445-475
130
-25
100
148
425-45
190
-30
100
150
355-385
430
-30
130
>150
400-430
Viscous Greases
Aral Aralub
MFL 00
Aral Aralub
GFP 000
Aral Aralub
FDP 00
Aral Aralub
FDP 0
Aral Aralub
SKA 00
GP 00
K-30
GP 000
E-30
GP 00/000 Sodium 00/000
H-20
GP 0
Sodium
0
H-30
GPHC 00 Al-ComK-30
plex
00
Biodegradable generalpurpose lubricating grease
with rapeseed oil base. For lubricating friction and
anti-friction bearings as well as for other lubricating
points with the service temperature range. Lubricating intervals must be shortened if used at higher
temperatures.
Biodegradable viscous grease with EP additives
and synthetic oil base. For central lubrication
systems of commercial vehicles and total-loss
lubricating points.
Biodegradable EP multi-purpose grease with synthetic oil base. For lubricating friction and anti-friction bearings. Oxidation- and aging resistant with
anti-wear additives.
Biodegradable special high-pressure grease with
synthetic oil base. Excellent for wheel flange lubrication. High load absorbing properties and water
resistance.
High-performance viscous transmission greases
with mineral oil base and special EP additives. For
general-purpose use in transmissions and gear
motors. Water-resistant, provides corrosion protection and reduces wear. Highly suitable for central
lubrication systems.
Viscous transmission grease with mineral oil base
and EP additives for lubricating spur gears, bevel
gears, worm gears, gear motors, flexible couplers,
etc. Good corrosion protection and increased load
bearing properties.
High-performance viscous transmission grease with
partially synthetic base and special EP additives
for long-term lubrication. Good corrosion protection
and adhesive properties, high loadbearing properties. Lubrication of spur gears, bevel gears, worm
gears, gear motors, flexible couplers, etc.
17
Lubricating Greases (continued)
Product Name
Labeling
under
DIN 51502/
DIN 51825
Thick
ener
Adhesive Lubricating Greases
Aral Aralub
MKA Z 0/1
Aral Aralub
MKA Z 1
Aral Aralub
MKA Z 00
Aral Aralub
LFZ 1
OGPF 0/1 Al-Complex +
S-20
Graphite
OGPF 0 Al-Complex +
R-25
Graphite
OGPF 00 Al-ComS+5
plex +
Graphite
OGPF 0/1 Lithium
+ GraK-20
phite
High-Pressure Thread Grease
Aral Aralub
4846
API BUL
5A3
Lithium
High-Temperature Greases
NLGI
Class
Base Oil
Viscosity
40 °C
(mm2/s)
ture
DIN ISO (0,1 mm)
(°C)
DIN ISO
2176
from to
2137
0/1
460
-20
200
(250)
>250
330-350
0
1050
-25
180
–
360-380
00
2500
5
200
–
400-430
0/1
170
-20
120
>160
335-365
General-purpose adhesive lubricating grease
with mineral oil base, EP additives and graphite.
Primarily for lubricating exposed gears. Increased
adhesive properties, good water resistance, excellent corrosion protection. Product is spray able und
economical to use.
1
120
-20
150
Non
dripping
310-340
High-pressure thread grease with mineral oil base
and solid lubricants. Based on API BUL 5 A3 standard. Use as lubricant and sealant on oil pipelines.
Ensures easy fastening and unscrewing of threads.
No heavy metal content.
High-temperature special-purpose grease with
EP additives and mineral oil base. Lubrication of
friction and anti-friction bearings operating at high
stress and temperatures as well as under dusty
or moist conditions (e.g. in the concrete industry).
Resists flexing and oxidation, increased pressure
resistance, good water resistance, wide service
temperature range, highly adhesive. At prolonged
temperatures above +150°C lubrication intervals
must be shortened accordingly.
High-temperature multi-purpose greases with
mineral oil base and EP additives for long-term
lubrication of highly stressed friction and antifriction bearings operating at increased bearing
temperatures.
High-temperature multi-purpose grease with
mineral oil base and EP additives for long-term
lubrication of highly stressed friction and antifriction
bearings operating at increased bearing temperatures and direct/indirect exposure to moisture and
water (e.g. lubrication on roll stands, rotary kilns,
sintered-metal bearings, etc.).
High-temperature special-purpose greases with
mineral oil base and EP additives. Excellent
oxidation stability, good adhesive properties and
water resistance. Lubricates friction and anti-friction
bearings under pressure or high impact stress and
high temperatures. At prolonged temperatures above +150°C lubrication intervals must be shortened
accordingly.
Aral Aralub
MKA 2
KP 2 R-20 Al-Complex
2
240
-25
210
>250
265-295
Aral Aralub
MKL 2
KP 2 P-30 LithiumComplex
2
160
-30
150
>260
265-295
Aral Aralub
MKL 3
Aral Aralub
MKC 2
KP 3 P-20 LithiumComplex
KP 2 N-30 CalciumComplex
3
160
-20
150
>260
220-250
2
100
-25
140
>240
265-295
Aral Aralub
HTR 2
KP 2 P-20
2
150
-25
18
Bentonite
150
Non
(200) dripping
265-295
Sprayable adhesive greases with mineral oil base,
EP additives and a special combination of solid
lubricants. Use in large exposed gear drives, e.g.
concrete tube mills. Products are free from bitumen
and solvents. Excellent adhesive properties, vibration-damping properties.
Product Name
Labeling
under
DIN 51502/
DIN 51825
Thick
ener
NLGI
Class
Base Oil
Viscosity
40 °C
(mm2/s)
High-Temperature Greases (continued)
Aral Aralub
MPU 1/2
K 1/2 R-10 Polycar
bamide
Heavy Duty Greases
ture
DIN ISO (0,1 mm)
(°C)
DIN ISO
2176
from to
2137
1-2
460
-10
160
(180)
250
290-320
Special-purpose polycarbamide greases with
mineral oil base for long-term lubrication of friction
and anti-friction bearings operating under extremely high temperatures, e.g. in the steel, construction, chemical and paper industries. Excellent
thermal stability ensures on slight softening at high
temperatures. Suitable for use in central lubrication
systems.
High-performance and heavy-duty grease with
partially synthetic base oil stocks and special EP
properties and solid lubricants. Extremely resistant
to flexing, oxidation and water. Good corrosion
protection. Especially suitable for highly stressed,
slow-running bearings, also under impact stress
conditions.
Long-term heavy-duty grease with mineral oil
base and special EP additives. Excellent antiwear
properties, good corrosion protection and long-term
lubrication characteristics. For lubricating highly
stressed anti-friction bearings running at slow or
medium rotation speeds, under high loads and with
occasional impact-type loads as well as exposure
to moisture.
Aral Aralub
4320
KPF 2 N-30 Lithium
+
Graphite
2
800
-30
140
>190
265-295
Aral Aralub
4034
KP 2 K-20 Lithium
Calcium
2
400
-25
130
>175
265-295
50-70
-20
60
>200
290-340
Special-purpose grease with mineral oil base. For
lubrication and corrosion protection of friction
springs used predominantly on railroads in telescopic shock absorbers. Meets TL B 1400.1 (2. edition)
requirements for greases of friction springs in shock
absorber.
Poly-carbamide special-purpose grease with synthetic oil base for long-term lubrication of friction
and anti-friction bearings operating under extremely high temperatures (e.g. bearings on annealing
furnaces, drying ovens, rotary kilns, exhaust fans
for aggressive media), corrosive environments at all
speeds approved for the use of lubricating greases.
Low residue deposits when service temperatures
are exceeded.
Synthetic high-performance greases for high temperatures. Dedicated long-term lubricants. Water
resistant, resistance against aggressive media and
almost all types of solvents. Extreme thermal and
chemical stability. No polymerization or coking
under high temperatures. Immiscible with mineral
oil based greases or with other synthetic bases!
Lubrication points must be cleaned thoroughly
before applying product.
Special-Purpose Grease, Mineral Oil Base
Aral Aralub
4807 D
M 1 C-20
Calcium
Complex
1/2
Special-Purpose Greases, Synthetic Base
Aral Aralub
SPU 1/2
KHC 1-2
R-30
Polycar
bamide
1-2
400
-30
180
(200)
>240
290-320
Aral Aralub
SPT 2
KFK 2 U-30
PTFE
2
210
-30
230
265-295
Aral Aralub
SPH 2
KFK 2 U-30
PTFE
2
400
-30
280
not
measurable
Non
dripping
265-295
Please refer to the “Food Grades” section on page 5
for lubricating greases with NSF-H1 registration for
use in the food, feed, cosmetics and pharmaceutical
industries.
19
Lubricating Greases (continued)
Product Name
Thick
ener
Labeling
under
DIN 51502/
DIN 51825
NLGI
Class
Base Oil
Viscosity
40 °C
(mm2/s)
Low-Temperature Greases/High-Speed Greases
Aral Aralub
SKL 2
KHC 2
N-50
ture
DIN ISO (0,1 mm)
(°C)
DIN ISO
2176
from to
2137
LithiumCalcium
2
31
-50
130
(140)
>190
265-295
Aral Aralub
HLP 2 /SL
KP 2 K-30 Lithium
2
185
-30
120
>180
265-295
Aral Aralub
HLPF 2
KPF 2 K-30 Lithium
+ MoS2
2
105
-30
120
185
265-295
Aral Aralub
MLC 2P SF
KP 2 K-30 Lithium
Calcium
2
220
-30
130
>170
265-295
180
265-295
190
220-250
>185
310-340
General-Purpose Greases
Aral Aralub
HL 2
Aral Aralub
HL 3
Aral Aralub
HLP 1
Aral Aralub
HLP 1,5
Aral Aralub
HLP 2
K 2 K-30
Lithium
2
105
-30
K 3 K-20
Lithium
3
105
-20
KP 1 K-20
Lithium
1
185
-20
120
(140)
120
(140)
120
KP 1-2 K-20 Lithium
1-2
185
-20
130
180
300
KP 2 K-30 Lithium
2
105
-30
120
(130)
180
265-295
20 Overview of Aral Products
Low-temperature special-purpose grease with synthetic oil base for long-term lubrication of friction
and anti-friction bearings, especially small bearings
at high rotation speeds or low propulsion power.
Especially recommended for contraction elements
consisting of material combinations of metal/plastic
or plastic/ plastic. Excellent low-temperature and
aging resistance, non resinous, tasteless, odorless.
High-pressure special-purpose grease with mineral
oil base, excellent flexing resistance and anti-aging
properties. For use under tough operating conditions with impact-type stress (mining equipment,
harbor area). Suitable for use in central lubrication
systems.
General-purpose EP lubricating grease with solid
lubricants and mineral oil base. Excellent EP characteristics and dry-running properties. Suitable for
use in central lubrication systems and for lubricating friction and anti-friction bearings at all speeds
approved for grease lubrication.
Multi-purpose grease with mineral oil base and EP
additives for long-term lubrication of friction and
antifriction bearings under high and partially impact-type stress. Suitable for use in central lubrication systems. Can be used in progressive distribution systems. Passed “Vogel-Marawe-Test”. Corrosion
protection even under saltwater exposure.
Multi-purpose grease with mineral oil base and
pronounced thermal and mechanical loadcarrying
capacity for friction and anti-friction bearings. Good
aging resistance and corrosion protection.
Flexing- and aging-resistant general-purpose EP
greases with mineral oil base. Reliable corrosion
and wear protection for highly stressed bearings at
low and medium rotation speeds, incl. mixed friction. Suitable for use in central lubrication systems
with common line diameters.
Transformer Oils and Insulation Oils
Product Name
Aral Isolan T
Aral Isolan TT
Viscosity
Density (g/ml)
(mm2/s) 20 °C
15 °C
17.0
17.0
0.880
0.880
Pour Point
°C
Flash Point
°C
<_ -45
<_ -45
138
138
Product Description
High-quality transformer oils with a base of specially treated
naphtenes with excellent aging resistance. Meet DIN 573701/VDE 0370, part 1, Class A, IEC 296, Class II requirements.
Isolan TT is pre-dried at factory.
Turbine Oils
Product Name
ISO-VG
Aral Kosmol HTX
extra
Viscosity
(mm2/s)
40 °C 100 °C
Density
(g/ml)
15 °C
Pour Point
°C
°C
52.5
7.4
0.868
-12
225
Aral Kosmol T 46
Aral Kosmol T 68
46
43.4
52.4
6.6
7.5
0.866
0.867
-12
-12
230
240
Aral Kosmol TF 32
Aral Kosmol TF 46
Aral Kosmol TF 68
32
46
68
32.0
46.0
68.0
5.5
7.0
8.7
0.867
0.872
0.875
-9
-9
-9
200
220
230
Aral Kosmol TL 32
Aral Kosmol TL 46
Aral Kosmol TL 68
32
46
68
32.4
46.4
66.6
5.6
7.0
8.7
0.863
0.868
0.871
-9
-9
-9
218
230
234
Turbine oil type L-TD (DIN 51515/part 1). Custom-developed aging-resistant refined solvent with good water and
air separation properties.
Turbine oil type TD. Custom-developed non-alloyed,
aging-resistant refined solvent with good water and air
separation properties. For bearings and control systems
of steam and gas turbines.
Turbine oil type L-TD (DIN 51515/part 1). Alloyed turbine
oils with most modern base oil stock and additive
technologies. Free from metalorganic and high polymer
compounds. Especially aging resistant and excellent
corrosion protection. Very good water and air separation properties. Lubricates steam, gas and water turbines
and their control systems. Meets supplier requirements
of renowned turbine manufacturers (e.g. Siemens,
KWU, Blohm und Voss, MAN-Energie and ABB).
Turbine oil type L-TD (DIN 51515/part 1). Alloyed turbine
oils for steam, gas and water turbines and their control
systems. Also for demanding circulation systems
such as tool making machines, control loop systems,
couplers, and transmissions. Especially aging resistant
and excellent corrosion protection. Good water and air
separation properties. Meets supplier requirements of
renowned turbine manufacturers (e.g. Blohm und Voss,
MAN-Energie and ABB).
21
Compressor Oils
Product Name
Viscosity
(mm2/s)
40 °C
Compressor Oils, Mineral Oil Based
Density
(g/ml)
15 °C
°C
°C
Aral Motanol HP 100
Aral Motanol HP 150
100
150
0.880
0.885
-12
-12
250
265
Aral Motanol HP 220
Aral Motanol HP 320
Aral Motanol HP 460
220
320
460
0.890
0.895
0.900
-12
-12
-9
265
285
290
Aral Motanol HE 32
Aral Motanol HE 46
Aral Motanol HE 68
Aral Motanol HE 100
Aral Motanol HE 150
Aral Kowal M 10
Aral Kowal M 20
Aral Kowal M 30
Aral Kowal M 40
Aral Kowal 3821
32
46
68
100
150
46
68
100
150
206
0.870
0.875
0.880
0.885
0.885
0.879
0.884
0.888
0.892
0.898
-12
-12
-12
-12
-12
-30
-27
-24
-21
-15
220
230
240
225
265
220
244
250
268
274
0.840
0.839
0.842
0.957
-48
-50
-48
-39
248
268
280
246
Synthetic compressor oil with PAO (poly-alpha olefin) base, type VDL
as defined by DIN 51 506. Excellent thermal and oxidative stability.
For use in rotary, screwtype and vane-type compressors.
Synthetic compressor oil with ester base, type VDL as defined by DIN
51 506. Excellent aging resistance and anti-wear properties. Suitable
for highly stressed screwtype and piston compressors.
Special-purpose compressor oil with narrow boiling range for mechanical precision and high vacuum pumps.
Low-sulfur high-performance compressor oil type VC/ VCL as defined
by DIN 51 506. Suitable for large-scale compressors. With very narrow boiling average, low coking tendencies and good demulsification
and air separation properties.
Low-sulfur high-performance compressor oil type VB/ VBL as defined
by DIN 51 506. Suitable for large-scale compressors. With very narrow boiling average, low coking tendencies and good demulsification
and air separation properties.
Compressor Oils, Synthetic Base
Aral Motanol SPA 46
Aral Motanol SPA 68
Aral Motanol SPA 100
Aral Motanol SH 100
46
68
100
100
Special-Purpose Compressor Oils
Aral Motanol HV 100
100
0.885
-12
255
Aral Motanol SA 100
100
0.879
-6
258
Aral Motanol SA 144
240
0.892
-12
265
Compressor oils type VB/VC as defined by DIN 51 506 with low
evaporation losses and low tendency for build-up of residue. For use
in mobile air compressors and single-stage reciprocating and rotary
piston compressors.
Compressor oils type VB/VBL as defined by DIN 51 506 with low
evaporation losses and low tendency for build-up of residue. For use
in mobile air compressors and single-stage reciprocating and rotary
piston compressors.
Compressor oils type VBL/VCL/VDL with low evaporation losses
as defined by DIN 51 506 and excellent aging resistance. Contains
anti-aging and corrosion protection additives. For use in mobile
air compressors and single-stage reciprocating and rotary piston
compressors.
Compressor oil type VCL as defined by DIN 51 506 with low coking
tendencies, high thermal stability, oxidation resistance and low evaporation losses. For use in screwtype, reciprocating and rotary piston
compressors.
Compressor oil type VB/VBL/VC as defined by DIN 51 506 with narrow boiling range and low evaporation losses. For use in large-piston
compressors. Meets API CC and MIL-L-2104 B specifications.
Heat Transfer Oils
Product Name
Viscosity (mm2/s)
40 °C
100 °C
Density
(g/ml)
15 °C
Pour
Point
°C
Flash
Point
°C
Product Description
Aral Farolin T
9.0
2.3
0.888
-57
146
Aral Farolin U
31.7
5.3
0.870
-15
225
Aral Farolin DBT Synth
17.6
3.3
1.048
-24
200
Pour
Point
°C
Flash
Point
°C
Product Description
Saturated steam cylinder oil type ZA as defined by DIN 51510. Suitable for steam temperatures of up to +310°C. For use in steam engines, steam locomotives, steam pile drivers, steam piston pumps,
etc. Can also be used as highly viscous lubricating oil for common
lubricating purposes.
Superheated steam cylinder oil type ZB as defined by DIN 51510.
Suitable for steam temperatures of up to +325°C. For use in steam
engines, steam locomotives, steam pile drivers, steam piston
pumps, etc. Can also be used as highly viscous lubricating oil for
common lubricating purposes.
Heat transfer oil with mineral oil base for non-pressurized operation
of closed-loop heat transfer systems. Predominantly for systems
started at extremely low temperatures, and in forced circulation
systems up to max. +230°C flow temperature (max. permissible film
temperature: +260°C).
Heat transfer oil with mineral oil base for non-pressurized operation
of closed-loop heat transfer systems operating at flow temperatures
of up to +320°C (max. permissible film temperature: +350°C).
Synthetic heat transfer oil with a base of high-quality di-benzyl-toluene. High thermal stability, favorable heat transfer values and long
durability. For use in closed-loop heat transfer systems operating
at high flow temperature of up to +350°C (max. permissible film
temperature: +370°C).
Cleaning fluids for heat transfer systems are listed in
the “Service Products” section on page 17.
Cylinder Oils
Product Name
Viscosity (mm2/s)
40 °C
100 °C
Density
(g/ml)
15 °C
Aral Wisal A
806.0
35.8
0.920
ca. -15
295
Aral Wisal B
930.0
47.0
0.926
-9
305
23
Appendix
Technical Explanations
Viscosity Tables
Viscosity is the measurement of internal friction of a fluid. Sir Isaac
Newton defined it in 1687 for the “absolute” or dynamic viscosity as
the correlation of shear stress and strain rate. The dynamic viscosity
of lubricating oils as Newtonian fluids according to DIN 53 015 can be
measured with the so-called “Höppler” falling-ball viscometer.
; 1 Pa � s = 1 Ns/m2
10-3 Ns/m2 = 10-3 Pa � s = 1 mPa � s = 1 cP (Centipoises)
The so-called “Ubbelohde” capillary viscometer is used for measuring
the kinematic viscosity v according to DIN 51 562.
= / 1 m2/s = 106 mm2/s = 106 cSt (Centistokes)
ISO-VG
ISO-VG refers to a rounded number value in a series of ascending
numbers as defined by DIN 51 519 for the kinematic viscosity of liquid
industrial lubricants.
The rounded number, e.g. in ISO-VG 7 is derived from the value 6.8
mm2/s, the value of mid-point viscosity at 40 °C. A single mid-point
viscosity value is approx. 50% larger/smaller than the value preceding
or succeeding it. Permissible tolerance of ISO-VG is +/-10% of mid-point
viscosity
ISO-Viscosity
Classification
ISO VG2
ISO VG
3
ISO VG
5
ISO VG
7
ISO VG 10
ISO VG 15
ISO VG22
ISO VG 32
ISO VG 46
ISO VG 68
ISO VG 100
ISO VG 150
ISO VG220
ISO VG 320
ISO VG 460
ISO VG 680
ISO VG 1000
ISO VG 1500
Mid-point
Viscosity at
40 °C mm2/s
(cSt)
2.2
3.2
4.6
6.8
10
15
22
32
46
68
100
150
220
320
460
680
1000
1500
Limits of Kinematic
Viscosity at
40 °C mm2/s (cSt)
min.
max.
1.98
2.42
2.88
3.52
4.14
5.06
6.12
7.48
9.00
11.0
13.5
16.5
19.8
24.2
28.8
35.2
41.4
50.6
61.2
74.8
90.0
110
135
165
198
242
288
352
414
506
612
748
900
1100
1350
1650
NLGI Classification
The “National Lubricating Grease Institute” has created a classification for the consistencies of lubricating
greases that was adopted as DIN 51 818 norm.
Consistency is defined as the resistance of a grease
to deformation (similar to the viscosity of lubricating
Consistency
Worked Physical
Classification Penetration Characteristics
according to
to
DIN 51 818 DIN 51 804*)
000
445-475 liquid
00
400-430 thick-liquid
0
355-385 semi-liquid
1
310-340 very soft
2
265-295 soft
3
220-250 malleable
4
175-205 almost hard
5
130-160 hard
6
85-115
very hard and
harder
*)
Type of Grease/Use
Viscous transmission grease and for use in central lubrication
systems
Transmission lubrication, central lubrication systems
Multi-purpose greases for friction and anti-friction bearings
For fast rotating anti-friction bearings, top-coat grease for
launching ships
Conventional water pump greases
Contrary to above classes; non-worked penetration: block
greases
DIN 51 804 T1/01.72 was replaced by DIN ISO 2137
24
oils). The deformation properties are dependent on
the type and amount of thickener, the viscosity-temperature characteristics of the base oil stock and the
duration of work penetration. Depending on their
worked penetration lubricating greases is divided into
nine NLGI consistency classes.
Labeling of greases according to DIN 51502
DIN 51502 regulates the uniform and unambiguous
labeling of lubricants and lubricating points. It is designed to prevent damage from confusing lubricants.
It also refers to other DIN standards, which describe
and specify lubricants and their test methods in
detail.
The labeling regulations for lubricating greases according to DIN 51502 define location of use, base oil
stock, additives, upper service temperature limits and
reaction with water.
K
PF
2
K
-30
Lower limit of service temperature in °C
Upper limit of service temperature and reaction with water (3)
NLGI-Classification
Supplementary letter for type of base oil stock and additives (2)
Code letter for type of lubricating grease (1)
(1) Type of lubricating grease
G
Enclosed gears DIN 51826
OG
Exposed gears
K
Friction and anti-friction bearings, bearing
surfaces according to DIN 52825
M
Friction bearings and seals (lower requirements than for K-type grease)
(2) Supplementary letter
for base oil stock:
E
Ester oils
FK
Fluorocarbons
HC
Synthetic Hydrocarbons
PG
Poly-glycols
PH
Ester of phosphoric acid
SI
Silicone oils
X
Other
for additives:
P
EP/AW additives
F
Solid lubricants, e.g. MoS2
(3) Upper service temperature limits and reaction
with water at test temperature (DIN 51807, T1 static
test)
C
D
E
F
G
H
K
M
N
P
R
S
T
U
Upper service
temperature1)
60 °C
60 °C
80 °C
80 °C
100 °C
100 °C
120 °C
120 °C
140 °C
160 °C
180 °C
200 °C
220 °C
> 220 °C
Reaction with
water2)
0 or 1
2 or 3
0 or 1
2 or 3
0 or1
2 or 3
0 or 1
2 or 3
Test
temperature
40 °C
40 °C
40 °C
40 °C
90 °C
90 °C
90 °C
90 °C
by arrangement
The upper service temperature for permanent lubrication is identical with the highest test temperature
if tested in accordance with DIN 51806-2 and/or DIN
51821-2 as long as tests are passed.
1)
Reaction with water:
0 = no change
1 = slight change
2 = moderate change
3 = strong change
2)
25
Index
Page
Page
Abrading Oil, see Cooling Lubricants, water-immiscible .......................... 14
Adhesive Lubricants .............................................................................................. 9
Adhesive Lubricating Greases ......................................................................... 18
Annealing Oils, see Tempering Oils ................................................................. 10
Broaching Oils, see Cooling Lubricants, water-immiscible ...................... 14
Cable Lubricants ..................................................................................................... 9
Chain Lubricants for the food industry with NSF-H1 registration,
see Food-grades ....................................................................................................... 5
Chain Lubricants, see Adhesive Lubricants .................................................... 9
Chain Oils ................................................................................................................... 9
Circulating Oils, see Gear Oils ............................................................................ 8
Cleaning Products, see Industrial Cleaners/Service Products. ......... 12/17
Closed-Loop Gear Oils .......................................................................................... 8
Compressed-Air Oils, see Adhesive Lubricants ............................................ 9
Compressor Oils ................................................................................................... 22
- For the food industry with NSF-H1 registration, see Food-grades ........ 5
- Mineral Oil Base .................................................................................................. 22
- Synthetic Base ..................................................................................................... 22
Cooling Lubricants
- Water-immiscible ................................................................................................. 14
- Water-miscible ...................................................................................................... 15
Corrosion Protection Agents ............................................................................ 13
Cutting Oils, see Cooling Lubricants, water-immiscible ............................ 14
Cylinder Oils ........................................................................................................... 23
DIN Labeling of Lubricating Greases ........................................................... 25
Drilling-Hammer Oils, see Adhesive Lubricants ........................................... 9
Flushing Fluids ......................................................................................................... 5
Food Grades .............................................................................................................. 5
Food Lubricants, see Food Grades ................................................................... 5
Form Oils .................................................................................................................... 7
Gear Oils ..................................................................................................................... 8
- For the food industry with NSF H1 registration, see Food Grades ...... 5
Grinding Solutions, synthetic ............................................................................ 16
Grinding Solutions/Grinding Oils, see Cooling Lubricants,
water-immiscible ..................................................................................................... 14
H1 Lubricants ............................................................................................................ 5
Heat Transfer Oils ................................................................................................ 23
Heavy-Duty Greases ............................................................................................ 19
High-Pressure Thread Grease ......................................................................... 18
High-Speed Greases ........................................................................................... 20
High-Temperature Greases ............................................................................... 18
Hydraulic Fluids, see Hydraulic Oils ............................................................... 10
- For the food industry with NSF-H1 registration ........................................... 5
- Biodegradable ........................................................................................................ 11
- Fire resistant ........................................................................................................... 11
Hydraulic Oils ......................................................................................................... 10
- HL ............................................................................................................................. 10
- HLP ............................................................................................................................ 11
- HLP-D ....................................................................................................................... 11
- HVLP ......................................................................................................................... 11
- HVLP-D ..................................................................................................................... 11
Industrial Cleaners ............................................................................................... 12
Insulator Oils ........................................................................................................... 21
ISO-VG ....................................................................................................................... 24
Labeling of Lubricating Greases .................................................................... 25
Low-Temperature Greases ............................................................................... 20
Lubricating Greases ............................................................................................. 17
- Biodegradable ....................................................................................................... 17
- For the food industry with NSF-H1 registration, see Food Grades ........ 6
- Special-Purpose Lubricating Greases, Mineral Oil Base ......................... 19
- Special-Purpose Lubricating Greases, Synthetic Base ............................ 19
Machine Oils, see Manufacturing and Base Oil Stocks .............................. 4
Manufacturing and Base Oil Stocks ............................................................... 4
Manufacturing Oils, see Cooling Lubricants,
water-immiscible/miscible .............................................................................. 14/15
Medicinal White oils .............................................................................................. 4
Metal Processing Oils, see Cooling Lubricants,
water-immiscible/miscible .............................................................................. 14/15
Metal Forming Oils, see Cooling Lubricants, water-immiscible ............. 14
Minimal Quantity Cooling Lubricant ............................................................. 15
Mounting Paste (NSF-H1), see Food Grades ................................................ 6
Multi-Purpose Oils, see Cooling Lubricants, water-immiscible .............. 14
NLGI-Classification ............................................................................................... 24
Panel Oils, see Form Oils ...................................................................................... 7
Pneumatic-Hammer Oils, see Adhesive Lubricants .................................... 9
Quenching Oils, see Tempering Oils ............................................................... 10
Refrigerant Machine Oils ................................................................................... 12
Release Agents, see Form Oils ........................................................................... 7
Rust Protection Oils ............................................................................................. 13
Rust Solvents .......................................................................................................... 13
Saw Chain Oils ......................................................................................................... 9
Service Products ................................................................................................... 17
Shock-Absorber Oils, see Hydraulic Oils ....................................................... 12
Slide Way Oils, see Adhesive Lubricants ......................................................... 9
Softening Oils, see Manufacturing and Base Oil Stocks ........................... 4
Spark Erosion Oils, see Cooling Lubricants, water-immiscible .............. 14
Stamping Oils, see Cooling Lubricants, water-immiscible ....................... 14
Tempering Oils ....................................................................................................... 10
Thermal Oils, see Heat Transfer Oils ............................................................. 23
Transformer Oils .................................................................................................... 21
Turbine Oils ............................................................................................................. 21
General-Purpose Greases ................................................................................ 20
Vacuum Pump Oils, see Compressor Oils ................................................... 22
Viscosity Tables ..................................................................................................... 24
Viscous Greases .................................................................................................... 17
White Oils ................................................................................................................... 4
27
Aral Aktiengesellschaft
Lubes
Neuhoefer Brueckenstrasse 127–152, 21107 Hamburg
Fon:+49 40 30235-6780
Fax:+49 40 30235-6688
www.aral-lubricants.com
PSS 60165
Stand: Mai 2006

Aral Industrial Lubricants

Transcription

Similar documents

Light freight

Overrunning Clutches and Backstops

Muzzleloading - S3 amazonaws com

product catalog cardan shafts

NLGI 79th Annual Meeting 2012

TM 150

5. august - Troostwijk Auctions