F1667 -13

Transcription

F1667 -13

PUBLIC VERSION
PETITION FOR THE IMPOSITION OF ANTIDUMPING AND COUNTERVAILING
DUTIES ON CERTAIN STEEL NAILS FROM INDIA, THE REPUBLIC OF KOREA,
MALAYSIA, THE SULTANATE OF OMAN, TAIWAN, THE REPUBLIC OF TURKEY,
AND THE SOCIALIST REPUBLIC OF VIETNAM
VOL. 1: GENERAL INFORMATION AND INJURY
INDEX OF EXHIBITS
BPI/Public
Tab Number
Exhibit N arne
BPI
General-1
Standing analysis and Industry Support Declarations
Public
General-2
Chronology of related steel nails proceedings
Public
General-3
HARMONIZED TARIFF SYSTEM OF THE UNITED STATES
(2013), Chapter 73 (excerpt)
Public
General-4
ASTM F1667-13, Standard Specification for Driven
Fasteners: Nails, Spikes, and Staples (2013)
Public
General-S
List of known producers and exporters of certain steel
nails from the countries of exportation
Public
General-6
Import data for subject merchandise from the Subject
Countries
Public
General-7
List of importers that have imported certain steel nails
into the United States from the Subject Countries
Public
Injury-1
Articles on housing construction
Public
Injury-2
Annual and YTD import volumes/value/AUVs
Public
Injury-3
Chart detailing U.S. producers' exit from the market
Public
Injury-4
Monthly import volumes
Public
Injury-5
Negligibility calculations
Public
Injury-6
HTSUS category overlap among Subject Countries
Public
Injury-7
Port of entry overlap among Subject Countries
Public
Injury-8
Oman monthly trends
Public
Injury-9
Import Genius identification of common importers
PUBLIC VERSION
Public
Injury-10
Ecosteel catalogue
Public
Injury-11
Kosteel catalogue and website information
Public
Injury-12
Region Group website information
Public
Injury-13
Demand conditions in India and Turkey
BPI
Injury-14
Historical and POI market shares
BPI
Injury-15
Mid Continent pricing data
BPI
Injury-16
Mid Continent trade and financial data
BPI
Injury-17
Lost sale and lost revenue allegations
Public
Injury-18
Stanley news article and TAA application
Public
Injury-19
Astrotech Steels Private Limited, Standalone Balance
Sheet for period 01/04/2012 through 31/3/201
Public
Injury-20
Indian nail industry information
Public
Injury-21
Korean nail industry information
Public
Injury-22
Malaysian nail industry information
Public
Injury-23
Omani nail industry information
Public
Injury-24
Taiwanese nail industry information
Public
Injury-25
Turkish nail industry information
Public
Injury-26
Vietnamese nail industry information
2
Exhibit General-1
PUBLIC VERSION
U.S. Certain Steel Nails Domestic Production Analysis
Company
[
[
[
[
Mid Continent Nail
Davis Wire
Tree Island
Illinois Tool Works
Maze Nails
Tremont Nail
Specialty Fasteners Systems, Inc.
Total [
[
[
[
[
[
Other Domestic Producers*
Fox Valley Steel & Wire
Progressive Steel & Wire
Pneu-Fast Co.
Senco Products, Inc.
Stanley Fastening Systems, L.P.
Total [
Grand Total [
Source: Attached Declarations
2013 Production (%)
2013 Production (short tons)
Supporters
[
[
[
77,586
431
7,516
8,737
3,615
251
1,423
99,559
62.29%
0.35%
6.03%
7.01%
2.90%
0.20%
1.14%
79.93%
]
]
]
]
]
]
]
]
2,500
8,000
3,500
7,500
3,500
2.01%
6.42%
2.81%
6.02%
2.81%
]
25,000
124,559
]
]
]
]
20.07% ]
100.00%
PUBLIC VERSION
DECLARATION
I, David W. Libla, President of Mid Continent Nail Corporation ("Mid
Continent"), state as follows:
1.
I have been involved in the U.S. steel nails industry for over 27 years.
Mid Continent, which was founded in 1987, is a producer and distributor of
steel nails in the United States.
2.
As part of my duties as President of Mid Continent, I closely
supervise the manufacturing operations within Mid Continent. In addition, I
continuously monitor the steel nail industry and our competitors' operations
in the United States and around the world. The steel nail industry is a
mature industry, using production equipment whose characteristics and
capabilities are well known. As a result, I am intimately familiar with the
various types of equipment used to produce steel nails and the various types
of operations in the United States and around the globe that manufacture
steel nails using these machines.
3.
As one of the largest producers and sellers of steel nails in the United
States, I am familiar with the production capabilities of the other steel nail
producers in the United States. The following companies produced steel
nails covered by the scope of this proceeding in the United States in 2013:
•. ,Davis Wire Corporation
• Fox Valley Steel & Wire, a division of Mid West Air Technologies,
Inc.
• Maze Nails, a division ofW.H. Maze Company
• Mid Continent Nail Corporation
• Paslode, a division of Illinois Tools Works
• Pneu-Fast Co.
• Senco Products, Inc.
- 1-
PUBLIC VERSION
• Specialty Nail Company
• Stanley Fastening Systems, LP
• Tree Island Wire USA, Inc.
• Tremont Nail, a division of Acorn Manufacturing
To the best of my knowledge, all of these companies remain in operation as
of the date of this Declaration.
5.
Based on my knowledge of the industry and the production
capabilities and market shares of U.S. producers, I estimate the total 2013
U.S. production of certain steel nails production of the following companies
to be as follows:
Company
U.S. Production (short tons)
2011
2012
2013
[
]
]
]
[
CERTIFICATION
I declare under penalty of perjury under the laws of the United States
of America that to the best of my knowledge, the foregoing is true and
correct.
Date: May_1D , 2014
·~
Davtd W. Ltb a
President
Mid Continent Nail Corporation
Public Version
DECLARATION
I, Peter M. Cronin, Executive Corporate Vice President, Sales and Marketing, Heico
Wire Group, state as follows:
1. Davis Wire, a Heico Wire Group company, is a domestic producer of certain steel
nails.
2. In 2011, 2012 and 2013, Davis Wire produced the following amounts of certain steel
nails:
Production (Short Tons)
Year
2011
2012
2013
]
]
]
[
[
[
3. In 2011,2012 and 2013 , Davis Wire shipped the following amounts ofU.S.-produced
certain steel nails to the U.S. market:
Year
2011
2012
2013
Shipments to the U.S.
Market (Short Tons)
]
]
]
[
[
[
3. Davis Wire supports the antidumping and countervailing duty petitions concerning
certain steel nails by imports from the India, Korea, Malaysia, Oman, Taiwan, Turkey,
and Vietnam.
This declaration is made in accordance with 28 U.S.C. § 1746. I declare under penalty of
perjury of the laws of the United States of America that the foregoing statements are true
and correct to the best of my information and belief.
Peter M. Cronin
Dated: May'Z:.~ , 2014
Public Version
DECLARATION
I, James M. Miller, Vice President Corporate Development for Tree Island Steel, the
parent of Tree Island Industries, Ltd./Tree Island Wire USA ("Tree Island"), state as
follows:
1. Tree Island is a domestic producer of certain steel nails.
2. In 2011, 2012 and 20 l3, Tree Island produced the following amounts of ce1tain steel
nails:
Yeat·
2011
2012
2013
Production (Sh011 Tons)
]
]
]
[
[
[
3. In 2011,2012 and 2013, Tree Island shipped the following amounts ofU.S.-produced
certain steel nails to the U.S. market:
Yeat·
2011
2012
2013
Market (Shott Tons)
[
[
[
]
]
]
3. Tree Island supports the antidumping and countervailing duty petitions concerning
certain steel nails fi·om India, Korea, Malaysia, Oman, Taiwan, Turkey, and Vietnam.
petjmy of the laws ofthe United States of America that the foregoing statements are true
Dated: Mayl), 20 14
PUBLIC VERSION
DECLARATION
I, [
_ _ _ _ _ ],[ _ _ _ _ _ _]of[
state as follows:
I.
),
) is a domestic producer of certain steel nails.
2. In2011,2012and2013,[
nails:
Year
201 I
2012
2013
) produced the following amounts of certain steel
[
[
[
3. In 201 I, 2012 and 2013, [
certain steel nails:
]
J
] shipped the following amounts ofU.S.-produced
Year
201 1
2012
2013
l
Shipments to U.S. Market
(Short Tons)
[
[
[
l
l
l
4. [
) supports the antidumping and countervailing duty petitions concerning
certain steel nails from India, Korea, Malaysia, Oman, Taiwan, Turkey, and Vietnam.
Dated: May J], 2014
PUBLIC VERSION
DECLARATION
], a
I, [
domestic producer of certain steel nails, state as follows:
1.
].
2. In 2011,2012 and 2013, [
Year
2011
2012
2013
] produced the following amounts of
[
[
[
3. In 2011,2012 and 2013, [
produced certain steel nails:
] shipped the following amounts of U.S.-
Year
2011
2012
2013
l
l
l
Market (Short Tons)
[
[
[
l
l
l
3. [
] supports the antidumping and
countervailing duty petitions concerning certain steel nails fi·om India, Korea, Malaysia,
Oman, Taiwan, Turkey, and Vietnam.
Dated: May 1"3>, 2014
PUBLIC VERSION
DECLARATION
],
I, [ _-:::-:-:-_ _ _],[_ _ _ _ _ _]of[
state as follows:
1.
] is a domestic producer of certain steel nails.
2. In2011,2012and2013,[
nails:
Year
2011
2012
2013
] produced the following amounts of certain steel
[
[
[
3. In 2011,2012 and 2013, [
]
l
] shipped the following amounts ofU.S.-produced
Shipments to U.S. Market
(Short Tons)
Year
2011
2012
2013
l
[
[
[
]
l
l
4. [
] supports the antidumping and countervailing duty petitions concerning
Dated: May~, 2014
PUBLIC VERSION
DECLARATION
I, [
I.
], state as follows:
r
] is a domestic producer of certain steel nails.
2.
In2011,2012and2013,[
Year
2011
2012
2013
] produced the following amounts of
[
[
[
l
J
l
3. In 2011,2012 and 2013, [
] shipped the following amounts ofU.S.produced certain steel nails to the U.S. market:
Year
2011
2012
2013
Market (Short Tons)
[
[
[
l
l
l
4. [
] supports the antidumping and countervailing duty petitions
concerning certain steel nails from India, Korea, Malaysia, Oman, Taiwan, Turkey, and
Vietnam.
]
Dated: May.fj. 2014
PUBLIC VERSION
DECLARATION
], state as follows:
I, [
], is a domestic producer of certain
I. [
steel nails.
] produced the following amounts of certain
2. In2011,2012and2013,[
steel nails:
Year
2011
2012
2013
[
[
[
l
l
l
3. In 2011,2012 and 2013, [
] shipped the following amounts ofU.S.produced certain steel nails to the U.S. market:
Market (Short Tons)
Year
2011
2012
2013
[
[
[
l
l
l
3. [
] supports the antidumping and countervailing duty petitions concerning
This declaration is made in accordance with 28 U.S.C. § I 746. I declare under penalty of
Dated: May:;()2014
Exhibit General-2
CHRONOLOGY OF ANTIDUMPING AND COUNTERVAILING
DUTY INVESTIGATIONS AND SECTION 2011202 INVESTIGATIONS
OF CERTAIN STEEL NAILS
On November 21, 1977, a complaint was filed by the domestic industry alleging
that certain steel wire nails from Canada were being sold at less than fair value within the
meaning of the Antidumping Act of 1921, as amended (19 U.S.C. § 160(a))
("Antidumping Act"). 1 In November 1978, the U.S. Department ofTreasury
("Treasury") determined that certain steel wire nails from Canada, except those produced
by Tree Island Steel Co., Ltd. and the Steel Co. of Canada, Ltd., were being, or were
likely to be, sold in the United States at less than fair value within the meaning of the
Antidumping Act. 2 In February 1979, the U.S. International Trade Commission ("ITC"
or the "Commission") determined that the domestic steel wire nails industry was not
being and was not likely to be injured, and was not prevented from being established, by
reason of the importation of certain steel wire nails from Canada that were being, or were
likely to be, sold at less than fair value within the meaning of the Antidumping Act?
On April20, 1979, Treasury, in conjunction with its administration of a Trigger
Price Mechanism ("TPM"),4 self-initiated an investigation to determine whether certain
The complaint was filed by: Armco Steel Corp.; Atlantic Steel Co.; Bethlehem
Steel Corp.: CF& I Steel Corp.; Keystone Steel & Wire Division of Keystone
Consolidated Industries, Inc.; Northwestern Steel & Wire Co.; and the Penn-Dixie Steel
Corp. See Antidumping Proceeding, 42 Fed. Reg. 64,942 (Dec. 29, 1977); Certain Steel
Wire Nails From Canada, Inv. No. AA1921-189, USITC Pub. 937, at 32 (ITC Feb. 1979)
("Canada Nails").
2
See AntidumvinJ!: Determination ofSales at Less Than Fair Value and Final
Discontinuance ofInvestigation, 43 Fed. Reg. 51,743 (Dep't Commerce Nov. 6, 1978).
3
4
See Canada Nails, USITC Pub. 937.
On December 6, 1977, the President approved the implementation of a Trigger
Price Mechanism by Treasury to monitor import prices of certain steel mill products.
Notice ofproposed rulemaking, 42 Fed. Reg. 65,214 (Dep't Treasury Dec. 30, 1977).
steel wire nails from the Republic ofKorea ("Korea") were being sold in the United
States at less than fair value within the meaning of the Antidumping Act. The
investigation was subsequently terminated under the Antidumping Act pursuant to the
transition rules set forth in section 102(b)(2) of the Trade Agreements Act of 1979, but
was continued under section 731 of the Tariff Act of 1930, as amended (the "Act"). That
investigation resulted in a finding by the U.S. Department of Commerce ("Commerce")
that certain steel wire nails from Korea were being sold at less than fair value. 5 The
Commission, however, determined that the domestic steel wire nails industry was not
materially injured and was not threatened with material injury, and that the establishment
of an industry in the United States was not materially retarded, by reason of imports of
certain steel wire nails from Korea. 6
On July 2, 1981, Commerce self-initiated antidumping investigations concerning
imports of certain steel wire nails from Japan, Korea, and Yugoslavia pursuant to
additional information developed under the Trigger Price Mechanism. 7 Specifically,
Commerce found that subject imports from these countries were likely being sold in the
Imports priced below certain trigger prices established by the Department of Treasury
(and later by Commerce) were viewed as potential sales at less than fair value. When
substantial quantities of such steel mill products entered the United States, an
antidumping investigation could be "triggered" by Treasury or Commerce on its own
accord. Id.
5
See Certain Steel Wire Nails From the Republic ofKorea; Antidumping, 45 Fed.
Reg. 34,941 (Dep't Commerce May 23, 1980) (Final Determination of Sales at Less Than
Fair Value and Exclusion From Investigation).
6
See Certain Steel Wire Nails From The Republic ofKorea, Inv. No. 73 1-TA-26
(Final), USITC Pub. 1088 (ITC Aug. 1980).
7
See Certain Steel Wire Nails From Japan, 46 Fed. Reg. 34,613 (Dep't Commerce
July 2, 1981); Certain Steel Wire Nails From Yugoslavia, 46 Fed. Reg. 34,614 (Dep't
Commerce July 2, 1981 ); Certain Steel Wire Nails From the Republic ofKorea, 46 Fed.
Reg. 34,615 (Dep't Commerce July 2, 1981).
2
United States below trigger prices and, therefore, possibly at less than fair value within
the meaning of section 731 ofthe Act. Although the Commission made a negative injury
determination with respect to certain steel wire nails from Korea in the previous year,
Commerce found new evidence indicating that sales of Korean nails were having an
injurious effect on the domestic industry. 8 The investigations resulted in an antidumping
duty order being issued against steel wire nails from Korea. 9 The investigation of
imports from Japan was subsequently terminated, while the investigation of imports from
Yugoslavia resulted in a negative injury determination by the International Trade
Commission. 10 The order against Korea was revoked effective October 1, 1984,
following a Voluntary Restraint Agreement ("VRA") 11 concerning imports of nails from
Korea. 12
On January 19, 1982, a petition was filed alleging that certain steel wire nails
from the Republic ofKorea were being subsidized within the meaning of section 701 of
8
Certain Steel Wire Nails From the Republic ofKorea, 47 Fed. Reg. 34,864 (ITC
Aug. 11, 1982).
9
Certain Steel Wire Nails From Korea, 47 Fed. Reg. 35,266 (Dep't Commerce
Aug. 13, 1982) (Antidumping Duty Order).
10
See Certain Steel Wire Nails From Japan, 46 Fed. Reg. 41,122 (Dep't Commerce
Aug. 14, 1981) (Termination of Antidumping Investigation); Certain Steel Wire Nails
From Japan, The Republic ofKorea, and Yugoslavia, Inv. Nos. 731-TA-45-47 (Prelim),
USITC Pub. 1175 (Aug. 1981).
II
On September 18, 1984, the President established a national policy for the steel
industry that led to the creation of the VRAs that established new measures limiting steel
exports into the United States from certain steel-supplying countries. Steel Import Relief
Determination, 49 Fed. Reg. 36,813 (Sept. 20, 1984). The VRAs expired on March 31,
1992.
12
See Certain Steel Wire Nails From Korea, 50 Fed. Reg. 40,045 (Dep't Commerce
Oct. 1, 1985) (Final Results of Changed Circumstances Administrative Review and
Revocation of Antidumping Duty Order).
3
the Act.U In September 1982, however, the countervailing duty investigation was
terminated following a determination by Commerce that Korean producers/exporters of
nails were not receiving benefits that constituted countervailable subsidies. 14
On January 24, 1984, a petition was filed under section 201 of the Trade Act of
1974 (19U.S.C. § 2251(b)(l)) alleging that carbon and certain alloy steel products,
including steel wire nails, were being imported into the United States in such increased
quantities as to be a substantial cause of serious injury, or the threat thereof, to the
domestic industry producing an article like or directly competitive with the imported
article. 15 Following the Commission's affirmative determination in July 1984 for several
of the products, including steel wire nails, the United States negotiated various
agreements to limit the importation of steel products into the United States, such as the
VRAs. 16
On June 5, 1985, petitions were filed alleging that certain steel wire nails from the
People's Republic of China ("China"), Poland and Yugoslavia were being, or were likely
to be, sold in the United States at less than fair value within the meaning of section 731 of
the Act. 17 The petitions concerning imports from Poland and Yugoslavia were
13
The petition was filed by: Armco Inc.; Tree Island Steel, Inc.; Atlantic Steel Co.;
Florida Wire and Nails; New York Wire Mills; and Virginia Wire and Fabric. Certain
Steel Wire Nails From the Republic ofKorea, 47 Fed. Reg. 6458 (Dep't Commerce Feb.
12, 1982) (Initiation of Countervailing Duty Investigation).
14
See Certain Steel Wire Nails From the Republic ofKorea, 47 Fed. Reg. 39,549
(Dep't Commerce Sept. 8, 1982) (Final Negative Countervailing Duty Determination).
15
The petition was filed by the United Steelworkers of America, AFL-CIO/CLC
and Bethlehem Steel Corp. See Carbon and Certain Alloy Steel Products, Inv. No. TA201-5 I, USITC Pub. 1553 (lTC July 1984), at 7.
16
Id.
17
The petitions were filed by Atlantic Steel Co., Atlas Steel & Wire Corp.,
Continental Steel Corp., Dickson WeatherproofNail Co., Florida Wire & Nail Co.,
4
subsequently withdrawn following VRAs with Poland and Yugoslavia with respect to
exports of steel wire nails to the United States. As a result, Commerce terminated the
investigations with respect to Poland and Yugoslavia. 18 The investigation with respect to
China led to a finding that the domestic steel wire nails industry was materially injured
by reason of less than fair value imports of certain steel wire nails from China. 19
On April20, 1987, a petition was filed alleging that certain steel wire nails from
New Zealand and Thailand were receiving bounties or grants within the meaning of
°
section 303 of the Act. 2 Commerce made affirmative findings with respect to both
countries and issued countervailing duty orders against steel wire nails from Thailand and
New Zealand in October 1987.21 On August 9, 1995, the orders were revoked by
Keystone Steel & Wire Co., Northwestern Steel & Wire Co., Virginia Wire & Fabric Co.
and Wire Products Co. See, e.g., Certain Steel Wire Nails From the People's Republic of
China (PRC), 50 Fed. Reg. 27,479 (Dep't Commerce July 3, 1985).
18
See Certain Steel Wire Nails From Yugoslavia, 51 Fed. Reg. 4205 (Dep't
Commerce Feb. 3, 1986) (Termination of Antidumping Duty Investigation); Certain Steel
Wire Nails From Poland, 50 Fed. Reg. 35,281 (ITC Aug. 30, 1985) (Termination of
Antidumping Duty Investigation).
19
See Certain Steel Wire Nails From The People's Republic of China, Inv. No. 731TA-266 (Final), USITC Pub. 1842 (ITC May 1986); Steel Wire Nails From the People's
Republic ofChina, 51 Fed. Reg. 10,247 (Dep't Commerce Mar. 25, 1986) (Antidumping;
Final Determination ofSales at Less Than Fair Value).
20
The petition was filed by: Air Nail Company; Atlas Steel & Wire Corp.; CF & I
Steel Corp.: Davis-Walker Corp., Dickson WeatherproofNail Company; Exposaic
Industries, Inc.; Keystone Steel and Wire Company; and Northwestern Steel & Wire
Company. Certain Steel Wire Nails from New Zealand, 52 Fed. Reg. 18,590 (Dep't
Commerce May 18, 1987) (Initiation of Countervailing Duty Investigation); Certain Steel
Wire Nails from Thailand, 52 Fed. Reg. 18,591 (Dep't Commerce May 18, 1987)
(Initiation of Countervailing Duty Investigation).
21
See Certain Steel Wire Nails From Thailand, 52 Fed. Reg. 36,987 (Dep't
Commerce Oct. 2, 1987) (Final Affirmative Countervailing Duty Determination and
Countervailing Duty Order); Certain Steel Wire Nails From New Zealand, 52 Fed. Reg.
37,196 (Dep't Commerce Oct. 5, 1987) (Affirmative Countervailing Duty Determination
and Countervailing Duty Order).
5
Commerce pursuant to section 753(b)(3)(B) ofthe Act, because no domestic interested
party requested a review under section 753(a) of the Act and, therefore, a negative injury
determination was made by the Commission.22
On March 22, 1989, a petition was filed alleging that certain steel wire nails from
Malaysia were receiving bounties or grants within the meaning of section 303 ofthe
Act.
23
Commerce, however, determined that no benefits which constitute bounties or
grants were being provided to Malaysian producers/exporters.24
On November 26, 1996, petitions were filed alleging that collated roofing nails
imported from China, Korea, and Taiwan were being sold at less than fair value within
the meaning of section 731 of the Act. 25 These investigations led to a finding that the
domestic collated roofing nails industry was threatened with material injury by reason of
6
less than fair value imports of collated roofing nails from China and Taiwan.2 The
investigation with respect to collated roofing nails from Korea was subsequently
22
See Revocation of Countervailing Duty Orders, 60 Fed. Reg. 40,568 (Dep't
Commerce Aug. 9, 1995).
23
The petition was filed by members of the Nail Committee of the American Wire
Producers Association. See Certain Steel Wire Nails From Malaysia, 54 Fed. Reg.
15,534 (Dep't Commerce Apr. 18, 1989) (Initiation of Countervailing Duty
Investigation).
24
See Certain Steel Wire Nails From Malaysia, 54 Fed. Reg. 36,840 (Dep't
Commerce Sept. 5, 1989) (Final Negative Countervailing Duty Determination).
25
The petitions were filed by Paslode Division of Illinois Tool Works Inc. See
Collated Roofing Nails From the People's Republic of China, the Republic ofKorea, and
Taiwan, 61 Fed. Reg. 67,306 (Dep't Commerce Dec. 20, 1996) (Initiation of
Antidumping Duty Investigations).
26
Collated Roofing Nails From China and Taiwan, Inv. Nos. 731-TA-757 & 759
(Final), USITC Pub. 3070 (lTC Nov. 1997).
6
terminated by the Commission following a negative determination by Commerce.27 On
November 19, 1997, Commerce issued antidumping orders against China and Taiwan.2 8
These orders were revoked effective November 19, 2002, because no domestic interested
party responded to Commerce's notice of initiation of its sunset review. 29
On July 3, 2001, following a request from the United States Trade Representative,
a section 201 investigation was initiated by the Commission under section 202 of the
Trade Act of 1974, 19 U.S.C. § 2252, to determine whether certain steel products were
being imported into the United States in such increased quantities as to be a substantial
cause of serious injury, or the threat thereof, to the domestic industry. The Commission,
however, made a negative determination with respect to carbon and alloy steel nails? 0
On May 29, 2007, petitions were filed alleging that certain steel nails imported
from China and the United Arab Emirates ("UAE") were being sold at less than fair value
within the meaning of section 731 ofthe Act. 31 These investigations led to a preliminary
27
See Collated Roofing Nails from Korea, 62 Fed. Reg. 51,420 (Dep't Commerce
Oct. 1, 1997) (Notice of Final Determination of Sales at Not Less Than Fair Value);
Collated Roofing Nails From Korea, 62 Fed. Reg. 53,799 (Dep't Commerce Oct. 16,
1997) (Termination oflnvestigation).
28
See Collated Roofing Nails From the People's Republic of China, 62 Fed. Reg.
61,729 (Dep't Commerce Nov. 19, 1997) (Notice of Antidumping Duty Order); Collated
Roofing Nails From Taiwan, 62 Fed. Reg. 61,730 (Dep't Commerce Nov. 19, 1997)
(Notice of Antidumping Duty Order and Amended Final Determination of Sales at Less
Than Fair Value).
29
See Collated Roofing Nails From the People's Republic of China and Taiwan, 67
Fed. Reg. 70,578 (Dep't Commerce Nov 25, 2002) (Final Results ofFive Year Sunset
Reviews and Revocation of Antidumping Duty Orders).
30
See Steel, Inv. No. TA-201-73, USITC Pub. 3479 (ITC Dec. 2001).
31
The petitions were filed by Mid Continent Nail Corporation, Davis Wire
Corporation, Gerdau Ameristeel Corporation (Atlas Steel & Wire Division), Maze Nails
(a division ofW.H. Maze Company), Treasure Coast Fasteners, Inc., and the United
Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service
Workers International Union. See Certain Steel Nails from the People's Republic of
7
determination that there was a reasonable indication that the domestic steel nails industry
was material injured by reason of less than fair value imports of certain steel nails from
China and the UAE. 32 The investigation with respect to certain steel nails from the UAE
was subsequently terminated by the Commission following a negative determination by
Commerce? 3 In the final phase of the investigation, the commission determined that the
domestic industry in the United States was materially injured by reason of imports ofless
than fair value from China. 34 On August 1, 2008, Commerce published an antidumping
order against subject merchandise China, which remains in effect.
35
On March 31, 2011, a petition was filed alleging that certain steel nails imported
from the UAE were being sold at less than fair value within the meaning of section 731
of the Act. 36 Following a unanimous determination of present material injury by the
China and the United Arab Emirates, 72 Fed. Reg. 38,816 (Dep't Commerce July 16,
2007) (Initiation of Antidumping Duty Investigations).
32
Certain Steel Nails from China and the United Arab Emirates, Inv. Nos. 731-TA1114-15 (Prelim.), USITC Pub. 3939 (lTC Aug. 2007).
33
See Certain Steel Nails from the United Arab Emirates, 73 Fed. Reg. 33,985
(Dep't Commerce June 16, 2008) (Notice ofFinal Determination of Sales at Not Less
Than Fair Value); Certain Steel Nails from the United Arab Emirates, 73 Fed. Reg.
39,041 (lTC July 8, 2008).
34
Certain Steel Nails From China, Inv. No. 731-RA-1194 (Final), USITC Pub.
4023 at 3 (lTC July 2008).
35
See Certain Steel Nails From the People's Republic ofChina, 73 Fed. Reg.
44,961 (Dep't Commerce Aug. 1, 2008) (Notice of Antidumping Duty Order).
36
The petition was filed by Mid Continent Nail Corporation. See Certain Steel
Nails from the United Arab Emirates, 76 Fed. Reg. 23,559 (Dep't Commerce Apr. 27,
2011) (Initiation of Antidumping Duty Investigation).
8
ITC, 37 on May 10, 2012, the Department published an antidumping order against subject
merchandise from the UAE, which remains in effect.38
There have been no further proceedings regarding certain steel nails.
37
See Certain Steel Nails From the United Arab Emirates, 77 Fed. Reg. 27,080
(lTC May 8, 2012).
38
See Certain Steel Nails From the United Arab Emirates, 77 Fed. Reg. 27,421
(Dep't Commerce May 10, 2012) (Amended Final Determination of Sales at Less Than
Fair Value and Antidumping Duty Order).
9
Exhibit General-3
Harmonized Tariff Schedule of the United States (2013)
Annotated for Statistical Reporting Purposes
CHAPTER 73
ARTICLES OF IRON OR STEEL
XV
73-1
Notes
1. In this chapter the expression "cast iron" applies to products obtained by casting in which iron predominates by weight over each of the
other elements and which do not comply with the chemical composition of steel as defined in Note 1(d) to chapter 72.
2. In this chapter the word "wire" means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension
exceeds 16 mm.
Additional U.S. Notes
1. For the purposes of heading 7304 or 7306, the rate of duty "Free (C)" appearing in the "Special" subcolumn applies only to tubes and
pipes with attached fittings, suitable for conducting gases or liquids.
2. For the purposes of subheading 7307.19.30, the expression "ductile fittings" refers to fittings which contain over 2.5 percent carbon and
over 0.02 percent of magnesium or of magnesium and cerium, by weight.
Harmonized Tariff Schedule of the United States (2013)
Annotated for Statistical Reporting Purposes
XV
73-27
Heading/ Stat.
Subheading Suffix
Article Description
Unit
of
Quantity
Rates of Duty
1
General
Nails, tacks, drawing pins, corrugated nails, staples (other
than those of heading 8305) and similar articles, of iron or
steel, whether or not with heads of other material, but
excluding such articles with heads of copper:
7317.00.10 00
Thumb tacks.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg.. . . . . . Free
2
Special
7317.00
7317.00.20 00
7317.00.30 00
7317.00.55
01
02
03
05
07
08
11
18
Other, suitable for use in powder-actuated handtools:
Not threaded.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg.. . . . . . Free
Threaded. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg.. . . . . . Free
Other:
Of one piece construction:
Made of round wire.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Free
Collated nails:
Collated roofing nails with a length of
20.6 mm to 46.1 mm, a head diameter
of 8.3 mm to 10.6 mm, a shank
diameter of 2.5 mm to 3.2 mm, whether
or not galvanized . . . . . . . . . . . . . . . . . . kg
Other:
Assembled in a wire coil:
Galvanized. . . . . . . . . . . . . . . . .
Other. . . . . . . . . . . . . . . . . . . . .
Assembled in a plastic strip:
Galvanized. . . . . . . . . . . . . . . . .
Other. . . . . . . . . . . . . . . . . . . . .
Assembled in a paper strip. . . . . . .
Assembled in a wire strip.. . . . . . . .
Other. . . . . . . . . . . . . . . . . . . . . . . .
20
Other:
Smooth shank:
Not coated, plated or painted. . . kg
Coated, plated or painted:
Galvanized. . . . . . . . . . . . . . kg
40
Vinyl, resin or cement
coated.. . . . . . . . . . . . . . . . . kg
50
Other. . . . . . . . . . . . . . . . . . kg
Other:
Not coated, plated or painted. . . kg
Coated, plated or painted:
Galvanized. . . . . . . . . . . . . . kg
70
80
90
7317.00.65
30
60
7317.00.75 00
3.5%
kg
kg
kg
kg
kg
Other:
With a length of less than 25.4 mm and
with a diameter of less than 1.65 mm. . . kg
60
1.5¢/kg
45%
kg
kg
19
30
4%
Vinyl, resin or cement
coated.. . . . . . . . . . . . . . . . . kg
Other. . . . . . . . . . . . . . . . . . kg
Other. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Free
Cut. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg
Other. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . kg
Of two or more pieces. . . . . . . . . . . . . . . . . . . . . . . kg.. . . . . . Free
5.5%
8%
Exhibit General-4
~7
~u1J
Designation: F1667-13
INTERNATIONAL
Standard Specification for
Driven Fasteners: Nails, Spikes, and Staples1
This standard is issued under the fixed designation Fl667; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This stmulard has been approved for use by agencies of the U~S. Department of Defense.
The Commercial and Government Entity (Cage) Code for ASTM: 81346.
1. Scope*
1.1 This specification covers nails, spikes, staples, and other
driven fasteners, as listed in Table 1.
NoTE 1-Fastener ductility infonnation is presented in Table 2 and
dimensional information in Tables 3-65.
1.2 Fasteners described in this specification are driven by
hand tool, power tool, or mechanical device in single or
multiple strikes and are positioned by hand, tool, or machine.
1.3 The values stated in inch-pound units are to be regarded
as standard. No other units of measurement are included in this
standard.
1.4 Fasteners in this specification are sold in bulk (loose)
form and are collated for loading into the magazine of an
application tool. Other than as covered in Section 9,
Workmanship, cohering materials (including, but not limited
to, plastic, adhesive bond, paper tape, plastic strip, plastic
carrier, wire, etc.) and relative orientation of collated fasteners
are not within the scope of this standard.
1.5 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents
Rods and Coarse Round Wire, Carbon Steel (Metric)
(Withdrawn 20lli
A641/A641M Specification for Zinc-Coated (Galvanized)
Carbon Steel Wire
B695 Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
F547 Terminology of Nails for Use with Wood and WoodBase Materials
F592 Terminology of Collated and Cohered Fasteners and
Their Application Tools
F680 Test Methods for Nails
Fl575 Test Method for Determining Bending Yield Moment
of Nails
3. Terminology
3.1 Definitions-The definitions used in this specification
are those of common commercial acceptance and usage and
also appear in Terminologies F547 and F592.
4. Classification
4.1 The fasteners and their Table l classification are identified as follows:
NoTE 2-The identification of fasteners, classi11ed by style and type
(alpha indicators) followed by a dash number (numerical code) based on
Tables 3-65, identifies dimensions specifically and establishes a PIN (part
identifying number) system when preceded by the F1667 ASTM designator of this specification. For example:
2.1 ASTM Standards: 2
Al53/Al53M Specification for Zinc Coating (Hot-Dip) on
Iron and Steel Hardware
A510M Specification for General Requirements for Wire
1
This specification is under the jurisdiction of ASTM Committee F16 on
Fasteners and is the direct responsibility of Subcommittee F16.05 on Driven and
Other Fasteners.
Current edition approved Dec. 1, 2013. Published February 2014. Originally
approved in 1995. Last previous edition approved in 2011 as Fl667- lla". DOl:
10.1520/F1667-13.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at [email protected]. For Anl!ual Book ofASTM
Standards volume information, refer to the standard's Document Summary page on
the ASTM website.
Identifies a cooler nail
with a length of 27/a, a
shank diameter of 0.120,
and a head diameter of
0.297 (See Table 10). A
nail
A
ASTM identifier
All dimensions are given in inches.
3
The last approved version of this historical standard is referenced on
www.astm.org.
*A Summary of Changes section appears at the end of this standard
Copyright© ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
Copyright by ASTM Int'l (all rights reserved); Mon Feb 17 10:09:34 EST 2014
1
Downloaded/printed by
George Skarich (Magnum Fasteners) pursuant to License Agreement. No further reproductions authorized.
cO F1667 -13
TABLE 1 Classification and Identification Index
Type
Style
1-Nails (NL)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
11-Cut nails (CN)
Ill-Spikes (SP)
IV-Staples (ST)
22.
23.
24.
25.
26.
27.
28.
29.
30.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.
8.
Brads
Barrel
Boat
Box A
Box B
Broom
Casing
Cooler
Sinker
Corker
Common
Common
Common
Common
Concrete
Double-headed
Fine
Finishing
Flooring
Lath
Lath
Masonry
Pallet
Gypsum wallboard
Gypsum wallboard
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Roofing
Shingle
Shingle
Siding
Slating
Rubber heel
Underlayment
Square-barbed
Masonry drive
Escutcheon
Glulam rivet
Post frame
Common
Basket
Clout
Trunk
Cobblers
Extra-iron clinching
Hob
Common
Gutter
Round
Barge and boat
Fence
Poultry netting
Flat top crown
Flat top crown
Round or V crown
Preformed
Electrical
Preformed hoop
Cap
Style Identification
BR
BL
BTH/BTL
BXA
BXB
BM
CN
CL
SK
CK
CMA
CMC
CMS
CMM
CTS/CTM
DH
FN
FH
FL
LHF
LHH
MRIMRH
PL
GWS
GWM
RFA
RFS
RFC
RFL
RFR
RFD
RFNS/RFND
SHAD/SHAS
SHSS/SHNSB
SDF/SDC/SDK
SLAISLC/SLS
RH
UL
SB
MD
ES
GR
PF
CM
BK
CL
TR
CB
EC
HB
CM
GRF/GRO
RDC/RDF
BB
FN
PN
FC
FCC
RC
PC
RE
PH
STC
Table
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
4.2 The trade designation, S, pennyweight, used in commercial practice is referenced in Tables 3-64 wherever it applies.
5. Ordering Information
5.1 Orders for driven fasteners under this specification shall
include the following information:
5.1.1 Quantity or weight;
TABLE 2 Bend Angles for Fasteners Using the Test Methods
FSSO Bend Test
Fastener Material
1.
2.
3.
4.
5.
6.
7.
8.
Steel wire: (low-carbon, medium-low
carbon, medium-carbon) (unhardened)
Stainless steel wire
Hardened steel fasteners
Sheet steel for cut nails, Type II,
and cut spikes, Type Ill
Copper (min 98 %)
Copper clad wire (min 20 %)
Aluminum alloy wire
Brass wire
Bend
Angle, o
180
180
20
90
180
180
90
180
5.1.2 Part identifying number (PIN) or product description
(see 4.1 and appropriate table);
5.1.3 Special material requirements, if specified, including
coatings or finishes;
5.1.4 ASTM designation;
5.1.5 Packaging requirements;
5.1.6 A producer's or supplier's certification that the material and the finished fastener are in compliance with this
specification, furnished only when specified in the purchase
order;
5.1.7 Supplementary requirements, if any; and
5.1.8 Any additions agreed upon between the purchaser and
the supplier.
6. Material Requirements
6.1 Steel wire used in the manufacture of driven fasteners
shall be of low carbon, medium-low carbon, or medium-high
carbon.
6.2 Stainless steel wire used in the manufacture of driven
fasteners shall be of Types 302, 304, 305, or 316.
6.3 Carbon steel wire for the manufacture of hardened steel
nails shall be suitable for heat treatment to a minimum
hardness of 37 HRC.
6.4 Sheet steel used in the manufacture of cut nails (Type II)
and cut spikes (Type III) shall be a medium-carbon sheet steel.
6.5 Copper used in the manufacture of driven fasteners shall
contain a minimum of 98 % pure copper.
6.6 Copper-clad steel wire used in the manufacture of
driven fasteners shall contain not less than 20 % copper by
weight. The average thickness of copper on the steel wire shall
be not less than 10 % of the radius of the clad wire; the
minimum thickness of copper on the steel wire shall be not less
than 8 % of the radius of the clad wire.
6.7 Aluminum alloy wire used in the manufacture of fasteners shall conform to Alloy 2024, 5056, 6061, or 6110 and
have a minimum ultimate tensile strength of 60 000 psi.
NoTE 3-Smooth shank nails are sometimes chemically treated to
remove grease, oil, and foreign matter and to roughen the surface
microscopically. Mechanically defom1ed nails are sometimes cleaned to
remove grease and foreign matter.
6.8 Brass wire used in the manufacture of fasteners shall be
of good commercial quality suitable for the purpose.
2
0
F1667-13
7. Physical Properties
7.1 Ductility-The fasteners shall be sufficiently ductile to
withstand cold bending without fracture, as specified in Table
2 for various materials used in the manufacture of fasteners
utilizing the conventional bend test described in Test Methods
F680. Mandrel diameter used in this test shall not exceed
nail/wire diameter. The cold bend test shall not apply to
unhardened nails with deformed shanks.
7.2 Tensile Strength-Finished driven fasteners are not normally subject to tension testing. However, the wire or sheet
used to manufacture the fastener is tested as required for
control in the production process during manufacture.
7.3 Number per pound-Number per pound figures are not
requirements. Number per pound varies (1) as actual dimensions vary within tolerance ranges, (2) between bright and
coated nails, and (3) with zinc coating thickness for galvanized
nails. No tolerances have been established for these figures.
They are for reference only and shall not be used as product
acceptance/rejection criteria.
8. Dimensions and Tolerances
8.1 Nominal dimensions of nails and spikes shall be as
shown in Tables 3-56. The following dimensional designations
shall apply:
S
L
= trade designation (reference in penny weight),
=
length, in.,
H
= head diameter or width, in.,
D
= shank diameter, in.,
B
= head separation, in. (Table 18), and
No./lb = approximate count per pound.
8.1.1 The lengths, L, of nails and spikes with flat heads or
parallel shoulders under the head shall be measured from under
the head or shoulder to the tip of the point. All other nails and
spikes shall be measured overall.
8.1.2 The diameter, D, of smooth shank nails and spikes
shall be measured away from the gripper marks. The diameter,
D, of formed or deformed shanks shall be measured before
deformation, or, if specified, the thread crest diameter after
deformation, or both. All diameter dimensions shall be taken
prior to the application of or after the removal of any coatings
or finish.
8.2 Tolerances on Nominal Dimensions for Nails and
Spikes:
8.2.1 Length tolerances shall be ± 1/J2 in. for lengths up to
and including 1 in.; ± Vt6 in. for lengths over 1 in., up to and
including 2 1/2 in.; ± 3/12 for lengths over 2Vz in., up to and
including 7 in.; and ± 1 /sin. for all lengths over 7 in.
8.2.2 Shank diameter tolerances shall be ±0.002 in. for
diameters smaller than 0.076 in. and ±0.004 in. for diameters
0.076 in. and larger.
8.2.3 Head Diameter Tolerances:
8.2.3.1 Hand Driven-Tolerances on head diameters of
roofing nails shall be +0, -10 % of the nominal head diameter
(the mean of two readings 90° apart). For other brads, nails,
and spikes, the tolerance shall be ± 10 % of the nominal head
diameter (individual measurement). The difference in diameter
across the long axis of a roofing nail shall not exceed that
across the short axis by more than 20 %. For other brads, nails,
and spikes, the difference in diameter across the long axis shall
not exceed that across the short axis by more than 10 %. A fillet
shall be provided under the head if not otherwise specified.
8.2.3.2 Pmver Driven-Tolerances on head diameters of
power-driven nails shall comply with the manufacturer's specifications and shall be suitable for use in the make and model of
the tool specified.
8.3 Nominal dimensions of staples shall be as shown in
Tables 57-65, and the following dimensional designations
shall apply:
8.3.1 Hand Tool-Driven Nominal Dimensions:
= leg length, inside, in.,
= round leg diameter, in.,
= crown width, inside, in., and
L
D
c
No./lb
approximate count per pound.
8.3.2 Power Tool-Driven Nominal Dimensions:
D
L
T
= round leg diameter, in.,
W
C
leg width, in. (see Tables 59 and 60),
crown width, outside, in., and
= steel wire gage.
G
leg length, outside, in.,
= leg thickness, in. (see Tables 59 and 60),
8.4 Tolerances on Nominal Dimensions for Staples:
8.4.1 Leg length, L, tolerances shall be + 1/Jz, -%4 in. for
both hand tool-driven and power tool-driven staples.
8.4.2 Diameter tolerances for hand tool-driven round
staples shall be ±0.002 in. for diameters smaller than 0.076 in.
and ±0.004 in. for diameters 0.076 in. and larger.
8.4.3 Thickness and width tolerances on power-driven
staples shall comply with the manufacturer's specification and
shall be suitable for use in the make and model tool specified
(see Tables 59 and 60).
8.4.4 Crown width tolerances are ± Y.12 in. unless otherwise
specified.
8.5 Nominal Dimensions for Cut Nails, Type IJ-Unless
otherwise specified, cut nails shall be sheared from medium
carbon sheet steel and shall have a wedge-shaped shank with a
sheared square point end narrower than the upset head end. The
designation T in Tables 46-51 refers to sheet thickness in
finished product. Other designations shall be the same as those
for nails in 8.1.
8.6 When gage is used for a nominal diameter dimension in
the application of this specification, it shall be in accordance
with the decimal equivalents as shown in Specification
A510M, unless otherwise specified.
9. Workmanship
9.1 Fasteners covered by this specification shall be true to
shape, well-finished, free from imperfections, clean, and free of
corrosion. Mechanically driven collated items shall be uniform
and aligned properly in their assembled form for use in power
tools.
Copyright by ASTM Int'l (all rights reserved); MonFeb 17 10:09:34 EST 2014
3
cO F1667 -13
10. Protective Coatings and Finishes
10.1 Zinc Coating:
10.1.1 Driven fasteners required to be zinc coated shall be
cut and formed from hot-dip, hard-wiped, galvanized steel
wire, electrogalvanized steel wire, or zinc flake/chromate
dispersion-coated steel wire; or they shall be cut from uncoated
(bright) steel wire and shall be hot-dip galvanized, electrodeposited zinc coated, mechanically deposited zinc coated, or
zinc flake/chromate dispersion coated after forming. Powerdriven staples are not normally zinc coated after forming.
I 0.1.2 Hot-dip galvanized or electrogalvanized steel wire
for the manufacture of fasteners shall have a coating weight in
accordance with Specification A641/A64lM, Supplementary
Requirements, Class 1.
10.1.3 Hot-dip galvanized steel fasteners coated after forming shall have a coating weight in accordance with Specification Al53/A153M, Class D, when a heavier coating for
exterior use is specified. If not otherwise specified, the coating
weight shall be in accordance with Specification A641!
A641M, Supplementary Requirements, Class 1.
I 0.1.4 Mechanically deposited zinc coatings applied to
fasteners after forming shall have a thickness in accordance
with Specification B695, Class 40, unless otherwise specified.
10.2 Other Coatings and Finishes (When Specified):
10.2.1 Cement coating shall be applied by tumbling, mechanical dispensing device, or immersion in resin or other
similar material and shall not be tacky or gummy. Cement
coatings on power-driven fasteners shall be uniform and
applied before, during, or after the fasteners are cohered into
strips, clips, or coils.
. NOT~ 4-Cement coatings increase the holding strength in withdrawal
of a dnven fastener, depending on the fastener size, amount of cement
coating applied, and method of driving.
10.2.2 Chemical etching shall remove the polish of fabrication and roughen the surface microscopically.
10.2.3 Blued nails shall be heated to form a thin, colored
oxide on the surface.
10.2.4 Miscellaneous finishes, such as tin plating, liquor,
brass plating, copper plating, phosphate coating, or oil coating
shall be applied.
10.3 Altered Shapes and Deformations:
10.3 .I Mechanically formed or deformed nail shanks shall
have barbs, flutes, threads, or angular serrations formed onto
the wire from which the nail is manufactured. Mechanically
deformed shanks shall have vertical or helical flutes or screwtype or annular (1ing)-type deformations rolled onto the shank.
Symmetrical helical shank deformations shall be obtained by
twisting square wire. The defmmations shall pass entirely
around the shank body, resulting in expanded ridges and
depressions. Interruptions in shank deformation to facilitate
attachment of materials for collating nails is permitted.
10.3.2 Mechanically formed or deformed nail heads shall be
round or T-headed; or they shall be altered round for suitable
use in a given make and model of a power-driving fastening
system.
10.3.3 Staples manufactured for intended use in power tools
shall comply with the tool manufacturer's specification or Type
IV, Style 3 (Table 59 or Table 60).
11. Certification
11.1 When specified in the purchase order, a producer's or
supplier's certification shall be furnished to the purchaser,
indicating that the fasteners are in compliance with this
specification and the purchase order.
12. Packaging and Package Marking
12.1 Unless otherwise specified, fasteners shall be in substantial commercial containers of the type, size, and kind
commonly used for the purpose, so constmcted as to preserve
the contents in good condition and to ensure acceptance and
safe delivery by common or other carriers to the point of
delivery. In addition, the containers shall be so made that the
contents can be removed partially without destroying the
container's ability to serve as a receptacle for the remainder of
the contents.
12.2 When specified, individual packages and shipping
containers shall be marked with the part-identifying number
and type, length, diameter (or gage, as applicable) of the
fastener, the name of the manufacturer or distributor, and the
quantity or net weight.
13. Keywords
13.1 diameter; driven fasteners; head; length; nails; point;
spikes; staples
4
cO F1667 -13
TABLE 3 Type I, Style 1-BradsA
NoTE 1-Steel wire, brad head, diamond point, round smooth shank, bright finish. When specified, brads shall have a modified brad head with a blunt
or chiseled point for use with mechanical drivers.
F 1667
NL
BR
-
D
dash number
D = diamond point
B = blunt point
C = chisel point
nail
ASTM identifier
...
0 ,,,
Dash No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
A
L
31e
'12
v.
5/e
6/a
3/•
3/•
o/4
'Ia
71a
'Ia
1
1
1
1'1•
11/•
11/•
11/2
1'/z
11/2
s
D
0.035
0.035
0.048
0.035
0.048
0.035
0.048
0.062
0.035
0.048
0.062
0.054
0.062
0.072
0.054
0.062
0.080
0.054
0.080
0.099
- Identifies a brad nail with a
length of 111z, a diameter
of 0.099, and a diamond point.
I
1
brad
20
3d
4d
Qioo
l::J
No./lb
Dash No.
L
D
9520
7060
3990
5680
3200
4800
2620
1550
4220
2220
1280
1500
1120
904
1210
940
560
1040
470
320
21
22
23
24
25
26
27
28
29
30
31
32
13/•
13/•
13/•
2
2
2
2'1•
2'1·
2'12
21/z
23/4
0.062
0.080
0.099
0.062
0.080
0.113
0.080
0.113
0.080
0.131
0.131
0.148
0.148
0.162
0.192
0.207
0.225
0.244
0.262
3
33
3'14
3'/z
4
4'/z
5
5'/z
6
34
35
36
37
38
39
s
No./lb
10d
12d
16d
20d
30d
40d
50d
SOd
670
400
270
580
350
180
320
160
290
110
97
70
65
50
31
24
18
14
11
5d
6d
7d
8d
9d
All dimensions are given Jn Inches.
TABLE 4 Type I, Style 2-Barrel NailsA
NoTE 1-Steel wire, flat head, diamond point, round smooth shank, bright, zinc or cement coated as specified.
F 1667
NL
BL
01
-
- Identifies a barrel nail
with a length of 5/e, a
diameter of 0.067, a head
diameter of 0.148, and a
bright finish.
B =bright
C = cement coated
B
I1
dash number
barrel
nail
ASTM identifier
0"'
.....
Dash No.
L
D
H
No./lb
Dash No.
L
D
H
No./lb
01
02
IVa
0.067
0.067
O.D76
0.076
0.148
0.148
o.1n
o.1n
1.550
1.300
850
750
05
06
07
08
11/e
0.076
0.080
0.092
0.092
o.1n
0.188
0.219
0.219
670
540
380
350
A
3/•
03
7/a
04
1
All dimensions are given In inches.
5
11/4
13/e
11/z
0
F1667-13
TABLE 5 Type I, Style 3-Boat nailsA
NoTE !-Steel wire, oval countersunk head, chisel point, round smooth shank, bright or zinc coated as specified.
F 1667
NL
rj_L
BT
- Identifies a heavy
boat nail with a
length of 3, a diam·
eter of 0.375, a
head diameter of
0.750, and zlnc
coated.
dash number
T
hea
vy
B =bright
Z = zinc coated
H = heavy L = light
boat
nail
ASTM Identifier
1J
1111
F 1667 NLBTL
Dash No.
01
02
03
04
05
06
07
A
s
L
4d
6d
8d
10d
12d
16d
20d
1112
F 1667 NLBTH
H
D
0.188
0.188
0.188
0.250
0.250
0.250
0.250
2
21/a
3
31/4
31/•
4
No.flb
0.406
0.406
0.406
0.500
0.500
0.500
0.500
Dash No.
82
62
50
24
22
20
18
01
02
03
04
05
06
07
s
L
D
H
No./lb
4d
6d
8d
10d
12d
16d
20d
1112
0.250
0.250
0.250
0.375
0.375
0.375
0.375
0.500
0.500
0.500
0.750
0.750
0.750
0.750
47
36
29
11
10
9
8
2
2'12
3
31/4
31/a
4
All dimensions are given In Inches.
TABLE 6 Type I, Style 4A-Box NailsA
NoTE 1-Steel wire, flat head, diamond point, round, barbed or smooth shank, bright or cement coated as specified. When specified, box nails shall
have an altered or T-head with a diamond, blunt, or chisel point for use with mechanical drivers.
F 1667
NL
BX
A -
09
- Identifies a bright box
B
nail, Style A, with a
length of 3, a diameter
of 0.128, a head diam·
eter of 0.312, and a
bright finish.
B =bright
C = cement coated
Il
dash number
Style A
box
nail
ASTM Identifier
0
~ '" t::::: ....
Cl
II I
F1667 NLBXA
Dash No.
s
01
02
03
04
2d
3d
4d
Sd
6d
7d
8d
05
06
07
A
L
11/4
11/a
1o/4
2
21/4
2'12
D
H
No. fib
0.067
0.076
0.080
0.080
0.099
0.099
0.113
0.188
0.219
0.219
0.219
0.266
0.266
0.297
940
590
450
390
220
200
140
Dash No.
08
09
10
11
12
13
14
s
9d
10d
12d
16d
20d
30d
40d
Copyright by AS1M Int'l (all rights reserved); Mon Feb 17 10:09:34 EST 2014
6
L
D
H
No.flb
2o/4
0.113
0.128
0.128
0.135
0.148
0.148
0.162
0.297
0.312
0.312
0.344
0.375
0.375
0.406
120
90
83
69
50
45
34
3
3114
3112
4
4'12
5
[email protected] F1667 -13
TABLE 7 Type I, Style 4B-Box NailsA
NoTE 1-Steel wire, flat head, diamond point, round smooth shank, cement coated.
F 1667
NL
BX
8
-
- Identifies a Style 8, box nail with a
length of 1"/a, a diameter of 0.072,
and a head diameter of 0.219.
04
II
dash number
Style 8
box
nail
ASTM identifier
0
""'>
F 1667 NLBXB
Dash No.
s
01
2d
3d
1'/a
4d
13/a
5d
6d
1%
02
03
04
05
A
L
17fo
D
H
No.Jib
Dash No.
s
L
D
H
No.Jib
0.058
0.062
0.067
0.072
0.086
0.172
0.188
0.203
0.219
0.250
1250
980
680
510
315
06
07
08
09
7d
8d
9d
10d
2Va
23/a
2"/e
27/a
0.086
0.099
0.099
0.113
0.250
0.266
0.266
0.297
280
190
170
120
All dimensions are given in Inches.
TABLE 8 Type I, Style 5-Broom NailsA
NoTE !-Steel wire, flat or star head, diamond point, round smooth shank, bright finish, as specified.
F 1667
NL
BM - 03
-Identifies a broom nail with a length of 3/•,
a diameter of 0.072, and a head diameter of
0.203.
l
dash number
broom
nail
ASTM Identifier
Dash No.
01
02
03
04
A
L
D
H
No./lb
0.072
0.080
0.072
0.080
0.203
0.219
0.203
0.219
1480
All dimensions ere given In inches.
7
990
1170
840
0
F1667-13
TABLE 9 Type I, Style 6-Casing NailsA
NoTE 1-Steel wire, flat cotmtersunk cupped head, diamond point, round smooth shank, bright finish.
F 1667
NL
CN -
11
- Identifies a casing nail
with a length of 31/•, a
diameter of 0.135, and a head
diameter of 0.177.
I
dash number
casing
nail
ASTM Identifier
C'
Dash No.
s
01
02
03
04
05
06
2d
A
3d
4d
5d
6d
7d
e.-
11U
L
D
H
No.flb
Dash No.
11/•
1112
13/•
2
21/•
0.067
O.o76
0.080
0.080
0.099
0.099
0.099
0.113
0.120
0.120
0.142
0.142
1090
650
07
08
09
10
11
490
415
245
215
s
Bd
9d
10d
12d
16d
L
D
H
No. Jib
21/a
23/•
3
31/•
31/2
0.113
0.113
0.128
0.128
0.135
0.155
0.155
0.170
0.170
0.177
150
135
95
90
75
TABLE 10 Type I, Style 7-Cooler NailsA
NoTE !-Steel wire, flat head, diamond point. round smooth shank, cement coated. When specified, coolers shall have an altered or T-head for use with
mechanical drivers.
F 1667
NL
CL -
09
- Identifies a cooler nail with a length of 2'/a,
a diameter of 0.120, and a head diameter
I
of0.297.
dash number
cooler
nail
ASTM identifier
e..
n
Ill I
Dash No.
s
L
D
H
No.flb
Dash No.
01
02
2d
1
11fa
13/e
15/a
17/e
0.062
0.067
0.080
0.086
0.092
0.172
0.188
0.219
0.234
0.250
1110
840
490
370
280
06
07
08
09
03
04
05
A
3d
4d
5d
6d
s
7d
8d
L
D
H
No.flb
21/e
23/a
0.099
0.113
0.113
0.120
0.266
0.281
0.281
0.297
210
140
130
100
9d
~.
10d
27/a
AU dimensions are given In Inches.
8
0
F1667-13
TABLE 11 Type I, Style 8-Sinker NailsA
NOTE 1-Stee1 wire, flat countersunk head, diamond point, round smooth shank, bright or cement coated. When specified, sinkers shall have an altered
or T-head for use with mechanical drivers.
F 1667
NL
SK -
13
C
I 1~~
- Identifies a sinker nail with
a length of 53/•, a diameter
of 0.244, a head diameter of
0.500, and cement coated.
B =bright
C = cement coated
dash number
sinker
nail
ASTM identifier
~
[) Ill I
Dash No.
s
L
D
H
No.Jlb
Dash No.
s
L
D
H
No./lb
01
02
03
04
05
06
07
3d
4d
5d
6d
7d
8d
10d
11fa
13fe
1&/a
11fa
21fa
23fa
27fa
0.067
0.080
0.086
0.092
0.099
0.113
0.120
0.172
0.203
0.219
0.234
0.250
0.266
0.281
940
530
390
290
220
150
110
08
09
10
11
12
13
12d
16d
20d
30d
40d
60d
31fa
31f•
0.135
0.148
0.177
0.192
0.207
0.244
0.312
0.344
0.375
0.406
0.438
0.500
81
64
40
30
23
14
A
w.
41f4
43f4
53f4
TABLE 12 Type I, Style 9-Corker NailsA
NoTE 1-Steel wire, flat countersunk head, diamond point, round smooth shank, cement coated. When specified. corkers shall have an altered or T-head
for use with mechanical drivers.
- Identifies a corker naU with a length of 1, a
diameter of 0.062, and a head diameter of
0.156.
e.
A
Dash No.
s
L
D
H
No.fib
09
10
11
12
13
14
15
16
10d
12d
16d
20d
30d
40d
50d
27/a
31/a
33/e
37/e
43/a
47/a
53fe
57fa
0.135
0.135
0.148
0.177
0.192
0.207
0.226
0.244
0.312
0.312
0.344
0.375
0.406
0.438
0.469
0.500
89
81
62
SOd
9
38
29
22
17
13
cO F1667 -13
TABLE 13 Type I, Style 10-Common NailsA
NoTE !-Aluminum alloy wire. flat head, diamond point, round smooth shank, or, when specified, square barbed shank.
F1667
NL
CM
A
-
- Identifies an aluminum
common nail with a
of 0.120, and a head
diameter of 0.266.
02
l
dash number
aluminum
common
nail
ASTM identifier
n .. "
F 1667 NLCMA
Dash No.
s
01
4d
02
6d
03
8d
A
L
D
H
No.Jib
Dash No.
s
0.099
0.120
0.148
0.250
0.266
0.281
830
04
05
06
10d
3
16d
31ft
4
430
220
L
20d
D
H
No.jlb
0.162
0.177
0.199
0.312
0.344
0.406
170
120
78
AU dimensions are given in inches.
NoTE !-Copper wire, flat head, diamond point, round smooth shank.
F 1667
NL
c
CM
11
- Identifies a copper
common nail with a
of 0.134, and a head
diameter of 0.281.
1
dash number
copper
common
nail
ASTM Identifier
~
..
... ,
F 1667 NLCMC
Dash No.
01
02
03
04
05
06
07
08
09
A
D
H
No. fib
Dash No.
L
D
H
No.Jib
0.065
0.065
0.072
0.072
0.072
0.083
0.109
0.109
0.120
0.156
0.156
0.172
0.172
0.172
0.203
0.250
0.250
0.266
1380
1160
960
810
700
420
210
180
140
10
11
12
13
14
15
16
17
18
2
2
2'12
3
31/o
4
4 112
5
6
0.120
0.134
0.134
0.148
0.165
0.203
0.220
0.238
0.284
0.266
0.281
0.281
0.312
0.344
0.406
0.438
0.469
0.531
130
L
5/o
3/•
3/•
7/e
1
11/•
11/a
13/•
13/4
AU dimensions are given in inches.
Copyright by ASTM Int'l (all rights reserved); Mon Feb 17 10:09:34 EST 2014 lO
86
56
40
23
18
14
8
0
F1667-13
NoTE 1-Steel wire, flat head, diamond point, round smooth shank, bright, zinc or cement coated as specified.
F 1667
NL
s
CM
-
05
B
- Identifies a steel
common nail with a
of 0.113, a head diameter of 0.266, and a
bright finish.
B"" bright
Z "" zinc coated
C "" cement coated
ll.
dash number
steel
common
nail
ASTM identifier
~
,,,.
r-.
F 1667 NLCMS
Dash No.
s
01
02
2d
3d
4d
5d
6d
7d
6d
9d
03
04
05
06
07
08
A
L
D
H
No./lb
Dash No.
s
L
D
H
No./lb
11/o
11/2
1o/•
2
21/•
21/•
2o/o
0.072
0.080
0.099
0.099
0.113
0.113
0.131
0.131
0.172
0.203
0.250
0.250
0.266
0.266
0.281
0.281
850
540
290
250
170
150
100
92
09
10
11
12
13
14
15
16
10d
12d
16d
20d
30d
40d
50d
60d
3
31/o
31/a
4
4'/a
5
5112
0.148
0.148
0.162
0.192
0.207
0.226
0.244
0.262
0.312
0.312
0.344
0.406
0.438
0.469
0.500
0.531
66
61
47
30
23
17
14
11
6
NoTE !-Aluminum alloy wire, stainless steel or steel wire, (bright, zinc coated or cement coated), altered or T-head, diamond or chisel point, round
smooth or deformed shank, as specified. For use with mechanical drivers.
F 1667
NL
CM
MS
- Identifies a mechanically driven, steel common nau with a length
of 2, diameter of 0.080,
and zinc coated.
MS • mechanically driven steel
MA • mechanically driven aluminum
For steel only:
B = bright
Z = zinc coated
C = cement coated
dash number
mechanically driven
common
nail
ASTM identifier
Dash No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
A
L
1'/•
1114
1'14
1'14
1 112
1'12
1'12
1'12
1 1/2
1%
1%
1%
1%
1%
0
0.080
0.086
0.092
0.099
0.080
0.086
0.092
0.099
0.113
0.080
0.086
0.092
0.099
0.080
Dash
No.
L
15
16
17
18
19
20
21
22
23
24
25
26
27
28
13/4
13/4
1%
1%
17/e
17/s
17/s
17/s
17/s
2
2
2
2
2
0
Dash No.
L
F1667 NLCMM
0
Dash
L
0
Dash
No.
L
0
Dash
No.
L
0
1%
F/s
17/s
17/s
2
2
2Vs
2Vs
2Vs
2'1s
2Vs
2'14
2%
2%
0.120
0.120
0.131
0.148
0.120
0.131
0.099
0.113
0.120
0.131
0.148
0.120
0.131
0.148
57
58
59
60
61
62
63
64
65
66
67
68
69
70
23fs
23fs
2%
23fs
2%
2%
21/2
2%
2%
2%
2%
2 7/s
3
3
0.113
0.120
0.131
0.148
0.120
0.148
0.162
0.148
0.120
0.131
0.148
0.120
0.120
0.128
71
72
73
74
75
76
77
78
79
80
81
82
3
3
3'/•
3%
3%
3'12
3 112
3'12
4
4
41/2
4 112
0.131
0.148
0.120
0.131
0.148
0.135
0.148
0.162
0.148
0.162
0.148
0.162
...
...
...
...
...
...
No.
0.086
0.092
0.099
0.113
0.080
0.086
0.092
0.099
0.113
0.080
0.086
0.092
0.099
0.113
29
30
31
32
33
34
35
36
37
38
39
40
41
42
2
2V•
2%
2'14
2'12
2%
2V2
2V2
3'12
1%
1%
1V2
11/2
1%
0.148
0.092
0.099
0.113
0.092
0.099
0.113
0.131
0.131
0.120
0.131
0.148
0.162
0.113
43
44
45
46
47
48
49
50
51
52
53
54
55
56
All dimensions given in inches.
11
cO F1667 -13
TABLE 17 Type I, Style 11-Concrete NailsA
NoTE 1-Harded steel, flat countersunk head, diamond point, smooth or mechanically deformed shank formed from round or square stock, as specified,
bright finish.
F 1667
NL
s -
CT
-Identifies a concrete nail with a smooth shank,
a length of 112, a diameter of 0.148, and a
head diameter of 0.312.
01
II
dash number
S = smooth shank
M = mechanically deformed shank
concrete
nail
ASTM Identifier
Cl
>
Ill
F 1667 NLCTS
Dash No.
L
D
H
01
02
03
04
05
'Ia
¥e
3/•
7/e
1
0.148
0.148
0.148
0.148
0.148
0.312
0.312
0.312
0.312
0.312
No. fib
450
350
290
250
210
F 1667 NLCTM
Dash No.
L
D
H
No.Jib
Dash No.
L
D
H
No.flb
01
02
3/4
1
11/a
13/•
0.181
0.181
0.181
0.181
0.284
0.284
0.284
0.284
240
204
116
112
05
06
07
08
2
21/a
0.181
0.181
0.181
0.181
0.284
0.284
0.284
0.284
93
68
60
52
03
04
A
23/•
3
TABLE 18 Type I, Style 12-Double-Headed NailsA
NoTE 1-Steel wire, flat heads, diamond point, round smooth shank, bright finish or cement coated.
F 1667
NL
OH
-
04
B
- Identifies a double-
1I
headed nail with a
of 0.162, 8 distance
between heads of 3/e,
and 8 bright finish.
B=bright
bright
C • cement coated
dash number
double-headed
nail
ASTM identifier
L~
;1
"""
~
Dash No.
s
L
D
B
No.Jib
Dash No.
s
L
D
8
No.jlb
01
02
6d
8d
10d
13/•
2'14
23/•
0.113
0.131
0.148
v.
160
04
90
05
06
16d
20d
30d
3
31/a
4
0.162
0.192
0.207
3/e
3/e
7f1e
45
28
22
03
A
v.
¥..
59
AU dimensions are given in Inches.
12
cO F1667 -13
TABLE 19 Type I, Style 13-Fine NailsA
NoTE 1-Steel or copper wire, fiat head, diamond point, round smooth shank, bright finish.
F 1667
NL
FN
S -
1
-Identifies a steel fine
nail with a length of
1 'Ia, a diameter of
0.072, and a head
diameter of 0.172.
C =copper
S - steel
01
I
dash number
steel
fine
naif
ASTM identifier
0 '''
A
):;lo-
Dash No.
s
L
D
H
No.flb
01
3d
1'/a
0.072
0.172
760
AD dimensions are given In Inches.
TABLE 20 Type I, Style 14-Finish NailsA
NoTE 1-Steel wire, brad head, altered or clipped T-head for use with mechanical drivers, diamond or chisel point, smooth or barbed shank formed
from round or square stock, as specified, bright finished.
F1667
NL
FH
s -
- Identifies a finishing nail with a length of 1,
a diameter of 0.058, and a head diameter of
0.086, and a smooth shank.
01
I
dash number
finishing
S =smooth
B =barbed
nail
ASTM identifier
0 '"
Dash No.
s
01
02
03
2d
3d
4d
5d
6d
7d
04
05
06
A
[ "J
0
Ill
~
'
:
1
'
:a.
L
D
H
NO./Ib
Dash No.
s
L
D
H
No.flb
0.086
0.099
0.106
0.106
0.135
0.135
1.470
880
630
530
290
250
07
08
09
10
11
12
8d
11/4
11/2
13/•
2
2'14
0.058
0.067
0.072
0.072
0.092
0.092
2'12
23/•
3
31/•
31/2
4
0.099
0.099
0.113
0.113
0.120
0.135
0.142
0.142
0.155
0.155
0.162
0.177
190
180
120
110
93
9d
10d
12d
16d
20d
13
George Skarich (Magnum Fasteners) pursulint to License Agreement. No further reproductions authorized.
65
cO F1667 -.13
TABLE 21 Type I, Style 15-Fiooring NailsA
NoTE 1-Harded steel or steel wire, casing head or flat-cupped countersunk head, diamond or blunt point, round, smooth or mechanically deformed
shank, dark (hardened), bright (steel wire) or cement coated, as specified.
F1667
NL
FL S
-
12
- Identifies a flooring
B
Il.
3'/:z, a diameter of
0.148, a head diameter of 0.281, and a
bright finish.
S .. smooth
D- deformed
B =bright
C = cement coated
D = dark (hardened)
dash number
smooth
flooring
nail
ASTM Identifier
=Deformed
Smooth=
D
Dash No.
s
01
02
03
2d
3d
4d
1 12
04
4d
1'12
05
5d
1"/•
06
6d
2
A
L
11/•
1
[I
8-
Ill
I I I
D
H
No.flb
Dash No.
0.072
0.072
0.080
0.092
0.092
0.113
0.141
0.141
0.156
0.156
0.156
0.203
840
700
430
370
310
180
07
08
09
10
11
12
§f§?d§f&g
s
§>>
L
D
H
No. Jib
7d
2'1·
8d
8d
21/:z
2'12
3
0.113
0.135
0.113
0.135
0.135
0.148
0.203
0.177
0.203
0.250
0.250
0.281
160
100
110
82
75
58
10d
12d
16d
3'1•
3112
TABLE 22 Type I, Style 16-Lath NailsA
NoTE !-Steel wire, flat head, diamond point, round smooth shank, blued finish.
F 1667
NL
LH
F
-
03
I
-Identifies a lath nail with a flat head, a
length of 11/a, a diameter of 0.072, and a
dash number
F =flat head
lath H = hooked head
nail
ASTM identifier
0
!II
F 1667 NLLHF
A
Dash No.
s
L
D
H
No.flb
01
02
03
2d
3d
1
1'/a
3d
1'/e
0.058
0.062
0.072
0.141
0.156
0.172
1.280
980
760
14
cO F1667 -13
TABLE 23 Type I, Style 16-Lath NailsA
NoTE 1-Steel wire, flat hook-head, diamond point, round smooth shank, bright, blued, or zinc coated as specified.
F 1667
NL
LH
H -
01
Z
- Identifies a lath nail
with a hook-head of
0.438, a length of
1'Ia, and zinc coated.
B =bright
Z = zinc coated
F = blued
II
zinc coated
dash number
hook-head
lath
nail
ASTM identifier
F 1667 NLLHH
A
Dash No.
L
D
H
No.Jib
01
1'/a
0.106
0.438
280
TABLE 24 Type I, Style 17-Masonry NailsA
NoTE !-Hardened steel, fiat or flat countersunk head, diamond point, mechanically deformed shank, bright finish.
F1667
NL
MR
S -
01
- Identifies a standard
masonry nail with a
length of 'lz, a diameter
0.148, and a head diameter of 0.312.
S = stenderd
H =heavy
I
dash number
standard
mesonry
nail
ASTM identifier
F 1667 NLMR
Dash No.
L
D
H
No.Jib
Dash No.
L
D
H
No./lb
01
02
03
04
05
06
07
08
'AI
0.312
0.312
0.312
0.312
0.312
0.312
0.312
0.312
340
o/4
1
1'1•
1'12
1o/4
2
2'14
0.148
0.148
0.148
0.148
0.148
0.148
0.148
0.148
09
10
11
12
13
14
15
2'12
2o/4
3
3'1•
31/:z
3o/4
4
0.148
0.146
0.148
0.148
0.162
0.162
0.177
0.312
0.312
0.312
0.312
0.344
0.344
0.375
76
70
67
Dash No.
L
D
H
No.Jib
Dash No.
L
D
H
No.Jib
05
04
1o/4
47
43
39
06
03
0.562
0.562
0.562
0.562
63
11/4
11/z
0.250
0.250
0.250
0.250
2
2'/a
31/:z
3
0.250
0.250
0.250
0.250
0.562
0.562
0.562
0.562
34
27
19
24
280
170
140
130
110
98
60
48
45
35
84
F1667NLMRH
01
02
A
07
08
15
0
F1667-13
TABLE 25 Type I, Style 18-Pallet NailsA
NoTE !-Hardened steel or steel wire (for mechanical drivers); flat head, altered or T-Head (for mechanical drivers); di<rmond, blunt diamond, blunt
chisel or blunt point; round, mechanically deformed shank; bright finish (steel wire); or dark (hardened), as specified.
F 1667
NL
PL -
15
-Identifies a pallet nail
with a length of 4, a
diameter of 0.177, a
head diameter of
0.438' and dark (hard·
ened).
B =bright
D = dark (hardened)
D
I
dark
dash number
pallet
nail
ASTM Identifier
~
Dash No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
A
L
1'12
15/a
2
2%
2'12
2'12
3
3
3
3%
3%
3'12
3%
3V2
4
4
5
6
7
8
1%
1%
1%
1'12
1%
1'12
15/s
1%
1%
1%
D
0.120
0.120
0.120
0.120
0.120
0.135
0.120
0.135
0.148
0.135
0.148
0.148
0.162
0.177
0.177
0.177
0.177
0.177
0.207
0.207
0.080
0.099
0.099
0.080
0.099
0.099
0.105
0.084
0.086
0.090
H
0.281
0.281
0.281
0.281
0.281
0.312
0.281
0.312
0.312
0.312
0.312
0.312
0.375
0.438
0.438
0.375
0.375
0.375
0.500
0.500
0.215
0.255
0.280
0.215
0.255
0.280
0.270
0.200
0.235
0.245
Ill
No. /Lb
190
170
140
130
120
93
98
79
66
73
61
57
47
38
35
35
27
23
15
13
561
367
367
468
305
305
251
364
347
317
3§§ ~$@>
Dash No.
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
L
1%
1%
2
2
2
2
2
2
2
2'14
2'14
2%
2'14
2%
2%
2%
2V2
2%
2%
2%
2\'2
2%
2%
2%
3
3%
3%
3%
4
4
Copyright by ASTM Int'I (all rights reserved); Man Feb 17 10:09:34 EST 2014
16
D
0.099
0.099
0.084
0.086
0.090
0.099
0.099
0.105
0.113
0.084
0.086
0.099
0.099
0.105
0.113
0.095
0.099
0.099
0.113
0.113
0.120
0.131
0.113
0.120
0.113
0.120
0.131
0.131
0.120
0.131
H
0.255
0.280
0.200
0.235
0.245
0.255
0.280
0.270
0.280
0.200
0.235
0.255
0.280
0.270
0.280
0.260
0.255
0.280
0.280
0.290
0.290
0.280
0.290
0.285
0.280
0.290
0.280
0.280
0.280
0.280
No. Lb
262
262
318
304
277
229
229
204
176
283
270
204
204
181
156
199
183
183
141
141
125
105
128
113
117
96
81
75
78
65
cO F1667 -13
TABLE 26 Type I, Style 19-Gypsum-Wallboard, Gypsumboard, and Drywall NailsA
NoTE
1-Stee1 wire, flat head, diamond point, round smooth or deformed shank, bright or blued finish.
F 1667
NL GW
S -
02
F
- Identifies a gypsumwaDboan:l nail with a
smooth shank, a length
of 11/e, a diameter of
0.092, a head diameter
of 0.375, and blued.
S = smooth shank
M = defonned shank
B =bright
F =blued
I.l
dash number
smooth shank
gypsum-wallboard
nail
ASTM identifier
~
,
ill
F1667 NLGWS
Dash No.
L
01
02
03
04
05
A
D
H
No.flb
0.092
0.092
0.092
0.106
0.092
0.297
0.375
0.297
0.375
0.375
470
450
420
310
290
TABLE 27 Type I, Style 19-Gypsum-Wallboard, Gypsumboard, and Drywall NailsA
NOTE
1-Steel wire, flat slightly countersunk head, long diamond point, round mechanically defonned shank, bright or blued finish.
0 ,.
iilllile-
F1667 NLGWM
Dash No.
L
D
H
No.flb
01
02
03
11/e
0.099
0.099
0.099
0.099
0.099
0.250
0.250
0.250
0.250
0.250
380
340
04
05
A
11/4
13/e
11/2
16/o
Copyright by AS1M Int'l (all rights reserved); Mon Feb 17 10:09:34 EST 2014 l?
320
290
270
<0 F1667 -13
TABLE 28 Type I, Style 20-Roofing NailsA
NoTE 1-Aluminum alloy wire, flat head, diamond point, round smooth shank, or, when specified, square-barbed shank.
F 1667
NL
RF
A
Q
05
-
roofing nail with a barbed
shank, a length of
1, a diameter of 0.120,
a head diameter of
0.438.
S = smooth shank
= barbed shank
Il_~
a
barbed shank
aluminum
roofing
nall
ASTM Identifier
F 1667 NLRFA
Dash No.
L
D
H
No./lb
Dash No.
L
D
H
No. jib
01
02
03
04
o/4
o/4
7/e
7fe
1
1
1
0.120
0.135
0.120
0.135
0.120
0.135
0.135
0.438
0.438
0.438
0.438
0.438
0.438
0.438
940
750
830
660
700
08
09
10
11
12
13
14
1114
11/4
11/a
11/a
1o/4
2
21/a
0.120
0.135
0.120
0.135
0.135
0.135
0.145
0.438
0.438
0.438
0.438
0.438
0.438
0.438
620
490
520
420
370
340
230
05
06
07
A
800
580
AU dimensions are given In Inches.
Copyright by ASTM Int'l (all rights reserved); MonFeb 17 10:09:34 EST 2014 lS
cO F1667 -13
NoTE 1-Steel wire; flat head; diamond point; round, smooth or defonned shank; bright or zinc coated, as specified, for hand driving or for use with
mechanical drivers.
F 1667
NL
a -
s
RF
33
-Identifies a steel rooflng nail with a barbed
shank, a length of 1'14,
a diameter of 0.142,
a head diameter of
0.484, and a bright
finish.
S = smooth shank
= barbed shank
B =bright
z = zinc coated
B
I Il
dash number
barbed shank
a
steel
roofing
nail
ASTM identifier
~,
Dash No
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
A
L
%
%
%
%
%
%
?fa
7fs
7fa
7fa
7/s
7fa
?fa
1Vs
1%
1Vs
1Vs
1Vs
1Vs
1V.
1V.
1V.
11f•
1V.
1V.
1V.
11/4
1'12
D
0.106
0.120
0.135
0.142
0.148
.0.162
0.106
0.120
0.120
0.135
0.142
0.148
0.162
0.106
0.106
0.120
0.120
0.135
0.142
0.148
0.162
0.106
0.120
0.135
0.142
0.148
0.162
0.106
0.120
0.120
0.120
0.135
0.142
0.148
0.162
0.106
..
H
0.375
0.438
0.469
0.484
0.500
0.500
0.375
0.438
0.500
0.469
0.484
0.500
0.500
0.281
0.375
0.438
0.500
0.469
0.484
0.500
0.500
0.375
0.438
0.469
0.484
0.500
0.500
0.375
0.312
0.438
0.500
0.469
0.484
0.500
0.500
0.375
;; ::I
~
5:).
No./lb
460
340
270
240
220
200
300
250
240
210
190
170
380
360
270
220
210
190
170
150
320
240
190
170
160
140
300
240
220
180
160
140
120
Dash No.
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
~
If I
L
1V.
1V.
1%
1'12
1V.
1V.
1'12
1 V2
11/2
1%
1%
1%
1%
1%
1%
1%
%
7fs
1
1V.
1'12
Pf4
2
2
2V2
2%
3
3
3 112
3%
4
4
3
3'12
4
4'12
All dimension are given in inches.
19
D
0.148
0.162
0.106
0.120
0.120
0.135
0.142
0.148
0.162
0.106
0.120
0.120
0.135
0.142
0.148
0.162
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.120
0.135
0.135
0.148
0.148
H
0.500
0.500
0.375
0.438
0.500
0.469
0.484
0.500
0.500
0.375
0.438
0.500
0.469
0.484
0.500
0.500
0.375
0.375
0.375
0.375
0.375
0.375
0.375
0.438
0.375
0.438
0.375
0.438
0.375
0.438
0.375
0.438
0.375
0.375
0.406
0.406
No.lib
140
120
180
160
150
130
120
110
220
160
140
130
120
110
92
290
259
232
209
179
157
156
156
125
125
104
104
89
89
78
78
72
62
46
40
cO F1667 -13
NOTE !-Copper-clad wire, fiat head, diamond point, round smooth shank.
F1667
NL
RF
C
-
- Identifies a copper
roofing nail with a
of 0.120, end a head
diameter of 0.375.
05
I
dash number
copper
roofing
nal
ASTM Identifier
F1667 NLRFC
L
D
H
No./lb
Dash No.
s
3d
1114
11/a
0.375
0.375
0.375
280
220
190
04
05
4d
0.120
0.120
0.120
5d
6d
7d
Dash No.
s
01
2d
02
03
A
06
L
D
H
No.Jlb
0.120
0.120
0.120
0.375
180
0.375
140
130
0.375
TABLE 31 Type I, Style 2D-Roofing NailsA
NoTE !-Steel wire; leak-resistant umbrella head; diamond point; round smooth or deformed shank; zinc coated.
F 1667
NL
RF
C
L
Identifies a leak resistant roofing nail with a
length of 2, a diameter of 0.135, a head diameter
of 0.500, screw shank. and zinc coated.
- 02
dash number
leak resistant
- smooth shank
C - screw shank
M - spiral shank
S
shank style
roofing
nail
ASTMID
Dash. No.
L
D
1
2
3
4
5
6
7
8
9
1%
2
2
2
2
2'12
2'12
2'12
3
0.135
0.135
0.135
0.148
0.148
0.135
0.148
0.148
0.148
AAII dimensions are given in inches.
Copyright by ASTM Int'l (all rights reserved); Man Feb 17 10:09:34 EST 2014
20
H
0.500
0.500
0.750
0.750
0.813
0.750
0.750
0.813
0.813
No./Lb
110
98
73
62
60
64
53
53
47
0
F1667-13
NoTE 1-Steel wire, flat reinforced head, needle or diamond point, round smooth shank, bright or zinc coated, as specified. (For prepared felt roofing.)
F 1667
NL
R -
RF
- Identifies a reinforced
heed roofing nail with a
of 0.1 06, and a heed
diameter of 0.625, and
Il
a bright finish.
B =bright
z = zinc coated
dash number
reinforced heed
roofing
nail
ASTM identifier
F1667 NLRFR
Dash No.
L
D
H
No.Jib
Dash No.
01
02
03
o/4
3/4
7/e
7/e
1
0.106
0.120
0.106
0.120
0.106
0.625
0.625
0.625
0.625
0.625
190
110
180
160
170
06
07
08
04
05
09
10
" All dimensions are given in inches.
21
L
D
H
No.flb
11/e
11/o
11/4
11/4
0.120
0.106
0.120
0.106
0.106
0.625
0.625
0.625
0.625
0.625
150
170
140
160
140
cO F1667 -13
NoTE 1-Hand-driven cap nails shall have a 1 in. diameter round plastic or steel cap with a cap diameter tolerance of± 0.063 in., or a flat or domed
square steel cap with an edge dimension 1 ± 0.063 in. Minimum thickness of the outside edge of plastic caps shall be 0.035 in. Minimum thickness of
metal caps shall be 0.030 in.t Nails are steel or stainless steel; with a diamond point; smooth or defonned shanks from round or spiral wire; and bright
or zinc finish. Nails with metal caps shall both be bright or both have zinc finish. All hand-dtiven cap nails are packaged as integral nail-cap units.
F 1667
NL
RF
07
MR
Z
2
Identifies a hand driven round metal cap nail
with an 1y., long 0.1 05" diameter ring shank with
a zinc finish.
finish
MR ~ Metal round cap
cap shape/material
dash number
roofing
MS ~ Metal square cap
PR - Plastic round cap
PS - Plastic square cap
B
- Bright finish
Z
- Zinc finish
1
2
3
4
- Smooth shank, round wire
- Ring shank, round wire
Spiral shank, round wire
- Spiral wire
nail
AST
ID
F1667 NLRFD
Dash No.
L
D
Steel
Plastic
130
120
115
110
110
110
100
362
339
323
Hand Driven
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
V2
5Js
3/4
7/a
1
11/s
1'/•
3
3
1%
1Y2
13/4
13/4
2
2
2%
2V2
3%
4
5
6
8
0.105
0.105
0.105
0.105
0.105
0.105
0.105
not used
not used
not used
not used
0.106
0.120
0.105
0.120
0.105
0.120
0.105
0.120
0.105
0.120
0.148
0.148
0.162
0.162
0.162
8
Dashes (-) indicate that the fastener size is not a standard size.
t Editorially corrected in March 2012.
Copyright by ASTM Int'1 (all rights reserved); Mon Feb 17 10:09:34 EST 2014
22
Downloadedlpnnted by
70
50
96
85
94
80
90
74
80
61
53
32
25
20
13
269
118
70
219
175
195
152
169
131
138
95
cO F1667 -13
TABLE 33 Type I, Style 2G-Roofing NailsA
(continued)
NoTE !-Power driven cap nails have a I in. diameter plastic or steel cap with a cap diameter tolerance of± 0.063 in. Minimum thickness of the outside
edge of plastic caps is 0.035 in. Minimum thickness of metal caps is 0.010 in. Nails are steel or stainless steel; with a diamond point; smooth or deformed
shanks from round or spiral wire; and bright or zinc finish. Nails with metal caps shall both be bright or both have zinc finish. With power driven cap
nails, nails and caps may be packaged together or separately. Regardless of packaging, nails and caps are separately loaded into application tools with
the nail being driven through the cap at point of application.
The nails used in the power driven cap nail systems are not considered roofing nails until they are combined with the cap.
F1667
NL
RF
07
MR
Z
2
Identifies a hand driven round metal cap nail
with an 1% long 0.1 05" diameter ring shank with
a zinc finish.
tinish
cap shape/material
dash number
roofing
MR- Metal round cap
MS - Metal square cap
PR - Plastic round cap
PS - Plastic square cap
B
Z
- Bright tinish
- Zinc finish
1
2
3
4
-
nail
AS
ID
Smooth shank. round wire
Ring shank, round wire
Spiral shank, round wire
Spiral wire
F1667 NLRFD
No/Lb 8
Dash No.
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
L
3/4
/a
7
7
/a
1
1
1%
1%
1'14
1 1/2
1'12
1'12
1%
1%
2
2
2
D
Power Driven
0.120
0.083
0.120
0.083
0.120
0.080
0.083
0.120
0.080
0.083
0.120
0.083
0.120
0.083
0.091
0.120
8 Dashes (-) indicate that the fastener size is not a standard size.
23
Steel
Plastic
185
200
168
196
154
268
400
240
355
215
320
310
190
290
280
165
265
140
250
230
114
190
140
183
126
176
106
170
82
cO F1667 -13
NoTE 1-Aluminum alloy wire, flat head with neoprene washer (for aluminum roofing sheet), diamond point, round, smooth, or mechanically deformed
shank, as specified.
F 1667
NL
RF
N
D -
02
roofing nail wHh a neoprene washer, a length
of 2, a diameter of 0.135,
and a head diameter of
0.438.
D = deformed shank
s = smooth shank
ll~w
deformed shank
neoprene
roofing
nail
ASTM identifier
Smooth=
""Deformed
DS¥§
D
II II
s;
~
F 1667 NLRFNS
F 1667 NLRFND
Dash No.
L
0
H
No.flb
Dash No.
L
0
H
No.(lb
01
02
03
04
13/4
2
21/4
21/z
0.135
0.135
0.135
0.135
0.438
0.438
0.438
0.438
320
01
02
03
13/4
2
21/4
2'12
0.145
0.145
0.145
0.145
0.438
0.438
0.438
0.438
290
260
230
210
A
280
240
210
04
TABLE 35 Type I, Style 21-Shingle NailsA
NoTE !-Aluminum Alloy wire, flat head. diamond point, round, smooth or mechanically deformed shank, as specified.
F1667
NL
shingle nail, smooth
shank, with a length of
11/4, a diameter of
0.113, and a head
diameter of 0.312.
D = deformed shank
S = smooth shank
SH
smooth
aluminum
shingle
nail
ASTM identifier
=Smooth Shank
Deformed Shank =
u...
0
lllilllii . . .
.....
it I
F 1667 NLSHAS
F 1667 NLSHAD
Dash No.
L
D
H
No.flb
Dash No.
L
0
H
No.flb
01
02
11/•
11/2
13/•
2
21/4
0.101
0.101
0.105
0.105
0.113
0.113
0.191
0.191
0.191
0.191
0.200
0.200
1060
860
720
610
180
130
01
02
03
04
05
06
1/a
11/•
11/•
11/4
1112
13/4
0.099
0.080
0.099
0.113
0.113
0.113
0.281
0.219
0.281
0.312
0.312
0.312
1310
1480
1010
780
660
610
03
04
05
06
A
2•12
AU dimensions are given in Inches.
24
0
F1667-13
TABLE 36 Type I, Style 21-Shingle NailsA
NOTE !-Steel wire, fiat head, diamond point, round, smooth (standard) or barbed (for special shingles) shank, bright or zinc coated, as specified.
F 1667
NL
SH
S
Q
03
-
B
-Identifies a steel
shingle nail with a barbed
shank, a length of
13/•, a diameter of
0.113, a head diameter
ot 0.406, and bright
finish.
S = smooth shank
= barbed shank
B =bright
Z = zinc coated
I
I
1
bright
dash number
barbed shank
a
steel
shingle
nail
ASTM Identifier
=Barbed
Smooth=
~
Jtf
::; :a.
F 1667 NLSHNSB
F 1667 NLSHSS
Dash No.
s
01
02
03
3d
3.5d
4d
A
D
H
No.Jib
Dash No.
0.092
0.099
0.106
0.250
0.281
0.281
410
310
260
01
02
03
04
L
L
D
H
No.Jib
1"•
1'12
0.113
0.113
0.113
0.113
0.406
0.406
0.406
0.406
250
210
180
162
w.
2
TABLE 37 Type I, Style 22-Siding NailsA
NoTE !-Aluminum alloy wire, fiat head (insulated), casing or countersunk head (wood), as specified, dian10nd point, round smooth shank or, when
specified, square-barbed shank.
F 1667
NL
SD
F
S
-
04
siding nail with a
smooth shank, a flat
head, a length of 2 '12,
a diameter of 0.135, a
= smooth shank
Q = barbed shank
F =flat head
C = casing heed
K = countersunk
head
I~Lm~
s
smooth shank
flat heed
siding
nall
ASTM identifier
= Countersunk Head
Flat Head=
F 1667 NLSDF
L
Dash No.
01
02
03
04
D
H
No.Jib
0.113
0.113
0.113
0.135
0.219
0.312
0.219
0.219
700
660
490
290
F 1667 NLSDK
F 1667 NLSDC
Dash No.
s
L
D
H
No.Jlb
Dash No.
s
L
D
H
No.Jlb
01
02
03
04
6d
7d
8d
9d
17fs
21/a
23/a
0.106
0.113
0.128
0.148
0.141
0.141
0.156
0.189
600
470
320
200
01
02
03
04
6d
7d
8d
9d
17/a
21/a
23/a
0.106
0.113
0.128
0.148
0.266
0.266
0.297
0.312
470
320
A
2~a
25
2~a
600
200
0
F1667-13
TABLE 38 Type I, Style 23-Siating NailsA
NoTE !-Aluminum alloy, copper or steel wire as specified. Aluminum and copper nails shall have a fiat head (0.312 to 0.375-in. diameter), diamond
point, and round smooth shank or, when specified, square-barbed shank. Steel nails shall have a flat, slightly countersunk head, diamond point, round
smooth shank, zinc coated.
F 1667
NL
SL
A
R -
06
Ll~
smooth shank
- Identifies an aluminum alloy slating nail with
a length of 1112 and a diameter of 0.120 and
a round smooth shank.
A= aluminum
C
=copper
S- steel
R = smooth shank
B = barbed shank
aluminum
slating
nail
ASTM identifier
..
Steel=
D
II'
...
= Aluminum or Copper
~
,,,
F 1667 NLSLA
Dash No.
L
0
No.~b
01
02
7/e
0.106
0.106
0.106
0.120
0.135
0.120
0.135
1170
1150
670
620
520
530
430
0.109
0.109
0.120
0.135
0.109
0.120
0.135
0.135
0.135
290
240
210
160
200
160
130
120
110
1
03
04
1'/•
11/•
11/•
1112
11/a
05
06
07
F 1667 NLSLC
01
02
03
04
05
06
07
08
09
11/•
1'1•
11/•
1'12
11/2
11/a
131•
2
F 1667 NLSLS
Dash No.
A
s
L
0
H
No. fib
0.106
0.128
0.128
0.135
0.148
0.312
0.375
0.375
0.406
0.438
420
220
190
140
100
01
02
3d
03
04
4d
5d
11/4
1'12
1o/4
05
6d
2
2d
All dlmanslons ere given In Inches.
Copyright by ASTM Int'l (all rights reserved); MonFeb 1710:09:34 EST 2014
26
cO F1667 -13
TABLE 39 Type I, Style 24-Rubber Heel NailsA
NoTE 1-Steel wire, flat or countersunk head, as specified, needle point, round smooth shank, bright finish.
F 1667
NL
RH
-
01
-Identifies a rubber heel nail with a length
of IVa, a diameter of 0.080, and a head
diameter of 0.154.
I
dash number
rubber heel
nail
ASTM Identifier
D
)
)
)
)
I>
0
Dash No.
L
D
H
Dash No.
01
02
03
1/a
0.080
0.080
0.080
0.154
0.154
0.154
04
05
06
~.
7fo
>> >)
C>
L
D
H
11/a
1'14
0.080
0.080
0.080
0.154
0.154
0.154
TABLE 40 Type I, Style 25-Underlayment NailsA
Noru 1-Steel wire, flat or flat, slightly countersunk head, diamond point, ronnd, mechanically defom1ed shank, bright finish.
F 1667
NL
UL
-
01
I
- Identifies an underlayment nail with a length
of 1, a diameter of 0.080, and a head diameter
of 0.188.
dash number
underlayment
nail
ASTM identifier
D
Dash No.
01
02
03
04
05
06
A
L
D
H
1'14
1'14
1%
13/a
1'/z
0.080
0.080
0.099
0.080
0.099
0.080
0.188
0.188
0.250
0.188
0.250
0.188
lifll!lllllllre--
No.flb
Dash No.
L
D
H
600
400
540
360
500
07
08
09
10
11
12
1'12
1%
13/4
17/a
21/a
0.099
0.099
0.099
0.106
0.109
0.113
0.250
0.250
0.250
0.266
0.266
0.297
23/a
27
S
No.flb
330
300
280
6d
7d
8d
170
170
140
0
F1667-13
TABLE 41 Type I, Style 26-Barbed NailsA
NoTE !-Steel wire, flat head, diamond point, square barbed shank, bright finish.
F 1667
NL
SB
-
01
- Identifies a square-barbed nail with a length
of 2, a diagonal of 0.113, a square dimension
of 0.080 by 0.1 02, and a head diameter of
0.250.
I
dash number
square-barbed
nall
ASTM identifier
~
A
Dash No.
s
Style
01
02
03
04
05
06
07
08
09
10
6d
8d
10d
16d
20d
6d
8d
6d
8d
common
common
common
common
common
box
box
finish
finish
truss
lHBB::>
L
Diagonal
2
2 112
0.113
0.131
0.148
0.162
0.192
0.099
0.113
0.092
0.099
0.131
3
3112
4
2
21/2
2
21/2
11/•
H
No. Jib
0.250
0.266
0.281
0.312
0.375
0.250
0.266
0.124
0.131
0.281
200
120
84
59
39
260
150
320
230
190
Square Dimension
0.080
0.092
0.105
0.113
0.135
0.072
0.080
0.062
0.072
0.092
X
X
X
X
X
X
X
X
X
X
0.102
0.120
0.135
0.149
0.170
0.089
0.102
0.083
0.089
0.120
TABLE 42 Type I, Style 27-Masonry Drive NailsA
NoTE !-Hardened steel, flat head, cone pilot point, round, high pitch, multiple-start threaded shank, bright finish. When specified, masonry drive nails
shall be proof lead tested.
F 1667
NL
MD
-
01
I
- Identifies a masonry drive nail with a length
of 3/• and a thread diameter of 0.125.
dash number
masonry drive
nail
ASTM identifier
t>
Dash No.
s
01
02
03
A
L
Thread Diameter
Dash No.
s
L
Thread Diameter
0.125
0.156
0.188
4
5
3/u
11/•
11/•
0.215
0.258
0.330
6
28
v.
s;,.
2
0
F1667-13
TABLE 43 Type I, Style 28-Escutcheon NailsA
NoTE 1-Steel or brass wire, as specified, oval head, diamond point, round smooth shank.
F 1667
NL
ES
S
-
escutcheon nail with a
length of 112 and a
diameter of 0.072.
09
I
s =steel
B =brass
dash number
steel
escutcheon
nail
ASTM Identifier
A
Dash No.
L
D
Dash No.
L
D
Dash No.
L
D
01
02
03
04
05
06
07
08
09
10
11
12
13
'14
1/4
'14
'14
1/4
1f2
'12
1/2
1/z
1f2
1/2
o/4
o/4
0.035
0.048
0.062
0.072
0.080
0.005
0.048
0.062
0.072
0.080
0.092
0.048
0.062
14
15
16
17
18
19
20
21
22
23
24
25
26
o/4
o/4
o/4
1
1
1
1
1
1'14
1'14
1'14
1 112
1 112
0.072
0.080
0.092
0.048
0.062
0.072
0.080
0.092
0.062
0.080
0.092
0.080
0.092
27
28
2
2
0.080
0.092
'''
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
. ..
. ..
. ..
. ..
. ..
...
. ..
. ..
. ..
. ..
AH dimensions are given In Inches.
TABLE 44 Type I, Style 29-Giulam RivetA
NOTE !-Hardened steel, flat countersunk head, diamond point, smooth shank, zinc coated, as specified.
F 1667
NL
GR
-
01
- Identifies a glulam rivet with a
length of 1 112, a diameter width
of 0.250, a diameter thickness of 0.125,
a head width of 0.345, and a
head thickness of 0.220.
I
dash number
glularnrlvet
nail
ASTM identifier
A
8
Dash No.
L
01
02
03
1Vz
2v.
31/2
No./fb
0.250
0.250
0.250
0.125
0.125
0.125
0.345
0.345
0.345
All dlmensions ere given In inches.
Tolerances: Dw - ±0.01 0, 0 1 - ±0.005, Hw - ±0.01 0, and H1 - ±0.01 0.
29
0.220
0.220
0.220
59
34
24
~
F1667-13
TABLE 45 Type I, Style 30-Post-Frame Shank NailsA
NoTE 1-Steel, flat head, diamond point, round, mechanically deformed shank, bright or zinc-coated as specified. Nails shall comply with the
supplementary requirements of Sl and Table SL2.
T1L.
F11667 Nll
·Identifies a hardened steel
dafonnad shank poat-fraiTHI nail
wllh a diameter of .135, blight
B= bright
dash number
post-frame ring shank
Z = zinc coaled
nail
ASTM identifier
L
If [Ul~~
TL
D
~
To
Dash No.
L
D
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
3
3
3
3.5
3.5
3.5
3.5
4
4
4
4
4.5
4.5
4.5
4.5
5
5
5
6
6
6
8
8
8
0.135
0.148
0.177
0.135
0.148
0.177
0.200
0.148
0.177
0.200
0.207
0.148
0.177
0.200
0.207
0.177
0.200
0.207
0.177
0.200
0.207
0.177
0.200
0.207
L
H
TL
max
min
D
T1
P
i
111111,1!1! III
H
Sf1e
s;,.
3/s
s;,s
s;,e
3/a
15132
5/"16
3/a
15/32
15/a2
s;,.
%
15132
15/a2
3/a
15/32
15/32
3/a
15/a2
15/32
%
1Sf.~ 2
15/32
T1-D
max
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
.010
T1-D
min
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
.005
p
TL
min
2.25
2.25
2.25
2.25
2.25
2.25
2.25
2.25
2.25
2.25
2.25
3
3
3
3
3
3
3
3
3
3
3
3
3
length, in.,
head diameter, in.,
length of threaded shank, in.,
maximum acceptable value (not subject to tolerances),
minimum acceptable value (not subject to tolerances),
shank diameter, in.,
crest diameter, in., and
pitch, or spacing of threads, in.
8
Root diameter is a calculated value and is not specified as a dimension to be measured.
30
Downloadediprinted by
Pmax
Pmin
Root Diameter 8
.077
.077
.077
.077
.077
.077
.077
.077
.077
.077
.077
.077
.077
.077
.077
.077
.077
.077
.077
.077
.077
.077
.077
.077
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
0.128
0.140
0.169
0.128
0.140
0.169
0.193
0.140
0.169
0.193
0.199
0.140
0.169
0.193
0.199
0.169
0.193
0.199
0.169
0.193
0.199
0.169
0.193
0.199
cO F1667 -13
TABLE 46 Type II, Style 1-Common Cut NailsA
NoTE !-Steel or copper, fiat head, bright finish.
F 1667
CN
CM
S
-
01
B
IL
- Identifies a common
steel, cut nail with a
length of 1, bright finish.
C,. copper
S =steel
B =bright
Z = zinc coated
dash number
steel
common
cut naU
ASTM Identifier
~I
A
Dash No.
s
L
Dash No.
01
02
03
04
05
2d
3d
31/zd
1
11/•
07
08
7d
1o/a
1112
09
06
6d
9d
10d
12d
16d
4d
5d
s
8d
10
11
12
13/•
2
L
Dash No.
s
L
21/•
21/z
13
14
15
16
17
20d
30d
40d
50d
60d
4
4'/z
5
5 112
6
2'¥•
3
sv.
3 112
000
...
...
TABLE 47 Type II, Style 2-Basket Cut NailsA
NoTE 1-Steel, fiat head, bright finish.
F 1667
CN
BK
-
04
I
- Identifies a basket cut nail with a length of
1, a thickness of 0.058, and a head diameter
of 0.220.
dash number
basket
cut naH
ASTM identifier
~(
Dash No.
L
T
H
No.flb
01
03
Sfa
3/4
7/e
04
1
0.049
0.049
0.058
0.058
0.180
0.180
0.203
0.220
2080
1500
1060
930
02
A
31
cO F1667 -13
I
TABLE 48 Type II, Style 3-Ciout Cut NailsA
NoTE 1-Steel, flat head, bright finish, blued or zinc coated, as specified (see 5).
F1067
CN
CL
-
01
- Identifies a clout, cut
a;4, a thickness of
0.065, and a head dl·
ameter of 0.220, bright
finish.
B • bright
F =blued
Z = zlnc coated
bright
dash number
clout
cut nall
ASTM identifier
Dash No.
L
T
H
No.flb
01
02
o/4
7/e
1
0.065
0.0685
0.072
0.0775
0.220
0.238
0.259
0.284
960
03
04
.4
11/4
no
580
380
TABLE 49 Type II, Style 4-Trunk Cut NailsA
NoTE 1-Steel, oval head, bright finish, blued, brass or copper plated, as specified.
F 1667
CN
TR
-
01
- Identifies a trunk cut
3/4, a thickness of
0.072, a head diameter of 0.2485, and
blued flnlsh.
B =bright
F =blued
R = brass plated
P = copper plated
F
1
blued
dash number
trunk
cut nail
ASTM Identifier
Dash No.
L
T
H
No.flb
01
02
03
04
o/4
0.072
0.072
0.083
0.083
0.2485
0.2485
0.2715
0.2715
670
610
450
350
7fa
1
11/4
" All dimensions are given in Inches.
32
e
F1667-13
TABLE 50 Type II, Style 5-Cobblers Cut NailsA
NoTE 1-Steel casing head, clinch point, bright finish or brass plated, as specified.
F 1667
CN
CB
-
01
- Identifies a cobblers
cut nail with a length of
•t., a thickness of
0.065, a head diameter of 0.109, and
brass plated.
B =bright
R = brass plated
R
I
brass plated
dash number
cobblers
cut nail
ASTM identifier
C'
Dash No.
L
01
02
03
IIJ
:;>'
T
H
No./lb
0.065
0.065
0.065
0.109
0.109
0.109
1950
1500
1340
TABLE 51 Type II, Style 6-Extra-lron Clinching Cut NailsA
NoTE 1-Steel, casing head, clinch point, bright finish or blued, as specified.
F 1667
CN
EC
-
09
- Identifies an extrairon clinching cut nail
with a length of 1lo, a
thickness of 0.0535, a
head diameter of 0.101,
and a blued finish.
B =bright
F = blued finish
F
lL
dash number
extra-iron clinching
cut nail
ASTM identifier
(I
Dash No.
L
01
02
3fs
03
•t.
04
05
1f••
'11•
5/s
...
?
T
H
No.Jib
Dash No.
L
T
H
No.Jib
0.049
0.049
0.049
0.049
0.049
0.093
0.093
0.093
0.093
0.093
4.130
3.400
3.040
2.864
2.260
06
07
08
09
"I"
0.049
0.0535
0.0535
0.0535
0.093
0.101
0.101
0.101
2000
1640
1600
1520
3f•
'3f••
7/e
33
0
F1667-13
TABLE 52 Type II, Style 7-Hob Cut NailsA
NoTE 1-Steel, square grooved head, clinch point, bright finish, or blued, as specified.
F 1667
CN
HB
-
01
B
- Identifies
a hob cut
nail with a length of 7/,e,
a thickness of 0.134, a
II
head diameter of 0.380,
and a blued finish.
B =bright
F = blued finish
bright
dash number
hob
cut nail
ASTM identifier
~I c
Dash No.
L
01
02
7
T
H
No.fib
0.134
0.134
0.380
0.380
270
260
" All dimensions are given in Inches.
TABLE 53 Type Ill, Style 1-Common SpikesA
NoTE !-These spikes shall be sheared from medium carbon sheet steel and shall have a wedged-shaped shank with a square point end narrower than
the upset head end. They shall have a flat head, bright finish, or zinc coated, as specified.
F 1667
SP
CM
- 01
Z
Jl_
- Identifies a common
spike with a length of
4, and zinc coated.
B =bright
Z = zinc coated
dash number
common
spike
ASTM Identifier
D
A
'
Dash No.
s
Dash No.
s
L
01
02
03
20d
30d
40d
4
41/a
05
06
SOd
6
SOd
7
5
07
100d
8
04
SOd
5112
34
L
0
F1667-13
TABLE 54 Type Ill, Style 2-Gutter SpikesA
NoTE !-Steel wire, oval head, chisel point, flat head, diamond point, bright finish or zinc coated, as specified.
F 1667
SP
GT
F - 03
- Identifies a gutter
splke with a flat head,
a length of 8, a diameter of 0.250, a head
zinc coated.
F =flat head
0 =oval head
B =bright
Z =zinc
Z
It
dash number
flathead
gutter
spike
ASTM identifier
~
~
()
"' f
I
if I
F 1667 SPGTF
Dash No.
L
D
H
01
02
03
04
05
06
07
6'12
7
8
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.562
0.562
0.562
0.562
0.562
0.562
0.562
81/z
9
10
10112
F1667 SPGTO
Dash No.
L
D
H
01
02
03
04
05
06
07
6112
0.250
0.250
0.250
0.250
0.250
0.250
0.250
0.531
0.531
0.531
0.531
0.531
0.531
0.531
7
8
81/z
9
10
10'12
"'AU dimensions are given in inches.
35
0
F1667-13
TABLE 55 Type Ill, Style 3-Round SpikesA
NoTE !-Steel wire, oval countersunk head, chisel point, flat head, diamond point, bright finish or zinc coated, as specified.
F1667
SP
RD
C -
IL
dash number
oval countersunk head
-Identifies a round spike
with an oval head, a
length of 5, a shank
diameter of 0.2625, a head
a bright finish.
C = oval countersunk head
F =flat head
B =bright
Z = zinc coated
round
spike
ASTM identifier
OVal Head CS "'
1)
Dash No.
01
02
03
04
s
40d
50d
60d
=Flat Heed
~1111111
1111111
~
F1667 SPRDCA
F1667 SPRDFA
L
D
5
5 112
6
7
0.2625
0.283
0.283
0.312
H
0.531
0.562
0.562
0.625
Dash No.
01
02
03
04
05
36
L
8
8
9
10
8
D
0.312
0.312
0.312
0.312
0.375
H
0.625
0.750
0.750
0.750
0.750
0
F1667-13
TABLE 56 Type Ill, Style 4-Barge and Boat SpikesA
NoTE !-Wrought iron, hot rolled steel rod or steel wire, square, diamond or oval head, chisel point, bright finish or zinc coated, as specified.
F1667
SP
BB
R
!J~
-Identifies a steel rod,
barge and boat spike
with a length of 12, oval
head of 11/a, a diameter of 15/a, and zinc
coated.
I • wrought Iron
R =steel rod
W "' steel wire
S = square head
D - diamond head
0 =oval head
oval head
steel rod
barge and boat
spike
ASTM identifier
a,,1,
I:J
F1667 SPBB
Dash No.
0-Square
H
L
Dash No.
D-Square
01
02
03
1/4
17/az
11/az
17/az
17/:s:z
17/32
17/32
17/32
"132
3
31/2
26
27
26
29
30
31
32
7/11
7/11
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
v.
v.
1/4
v.
1/4
1/4
•t••
15/ta
•t••
•;,.
'Vto
'Vto
31a
o/a
%
o/a
o/a
3/a
o/a
o/a
o/a
o/a
7/ta
7ft a
••taz
18/32
'"132
18/32
10/32
11/ta
11/ta
11/te
11/te
"I••
/ta
11
111te
11/te
11/ta
"Ita
13ft a
13ft a
4
5
6
7
8
31/2
4
5
6
7
8
3
31/a
4
5
6
7
8
9
10
11
6
7
33
34
35
36
37
38
39
40
41
42
37
H
1o/to
'o/11
13/ta
13/11
1o/11
1fto
7/te
7/11
'Ia
'Ia
'Ia
1/a
'Ia
'Ia
1/a
6/a
1/a
15/a
"'•Iao
1
1
1
1
1
1
1
11/o
11/a
11/a
11/a
11/a
L
8
9
10
11
12
6
7
8
9
10
11
12
8
9
10
11
12
cO F1667 -13
TABLE 57 Type IV, Style 1-Fence StaplesA
NoTE 1-Steel wire, bright finish or zinc coated, as specified.
F 1667
ST
FN -
01
Z
Il~
- Identifies a fence
staple with a length of
7/e, a diameter of
0.1483, and zinc coated.
B =bright
Z =zinc
dash number
fence
staple
ASTM identifier
A
Dash No.
L
D
01
02
03
04
05
06
7/a
1
11/a
11/•
11/a
0.1483
0.1483
0.1483
0.1483
0.1483
0.1483
13/•
No.Jib
120
110
97
87
72
61
TABLE 58 Type IV, Style 2-Poultry Netting StaplesA
NoTE 1-Steel wire, zinc coated.
F 1667
ST
PN
-
01
I
- Identifies a poultry netting staple with a
length of 3/• and a diameter of 0.080.
dash number
poultry netting
staple
ASTMidentifier
Dash No.
01
L
D
No. Jib
0.080
500
38
cO F1667 -13
TABLE 59 Type IV, Style 3-Fiat Top Crown StaplesA
NoTE 1-Steel wire, aluminum alloy wire, bright finish, zinc coated, cement coated or chemically etched, as specified. (For use in power tools for
fastening wood and other materials to wood.)
F1887
ST
FC
rft;ifl
j_J .
F1667 STFC
Dash No.
c
G
L
Dash No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
3/1s
18
18
18
18
18
18
18
18
14
14
14
14
14
14
14
14
14
14
14
16
16
16
16
16
16
16
16
16
16
16
18
18
18
18
18
18
18
18
18
18
18
14
14
14
14
14
14
14
14
14
3fs
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
31JG
3f1s
31Js
3f1s
3f1s
3As
3/16
3/s
3fs
3fs
3fs
3fs
%
%
%
%
%
%
%
%
%
%
%
%
%
3fs
%
%
3fs
%
%
%
%
3/s
%
%
%
3fs
%
%
7As
7;16
7/1s
7f1s
7As
7As
7f1s
7116
7116
'!2
5fa
%
7/s
1
11/a
1'14
3fa
V2
5fa
3;4
7/s
1Vs
1'14
13/a
1'12
15/a
15/a
1%
V2
5/a
3;4
7/s
1'/s
1%
1%
1'12
1%
1%
3/s
'12
5fa
3;4
7fs
1'/s
11/4
1%
1'12
15/s
1%
%
'12
5fs
3;4
7/s
1
11/s
1%
1%
c
7/16
7116
7/16
7/16
7/16
7/16
7f1s
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/ls
7/16
7/16
7/1s
7/16
7/16
7/16
7As
7/1s
7/1s
7/16
7/16
7/1s
7/16
7/16
7/16
7/16
7As
7116
7/16
7/16
7/1s
Vz
'12
'12
V2
'!2
'12
'12
'!2
'!2
'12
'12
39
George Skarich (Magnum Fasteners) pursuant to License Agreement No further reproductions authorized.
G
L
14
14
14
14
14
14
14
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
14
14
14
14
14
14
14
14
14
14
14
1%
1%
1%
F/s
2
2%
2'12
3fs
V2
5fa
%
7/s
1
11/a
1%
1%
1%
1%
1%
F/s
2
2%
2'12
%
'12
%
%
7/a
1
1'/a
1%
1%
1V•
15/s
1%
F/s
2
2%
2'12
'12
5/s
%
7/s
1
1'1s
1%
1%
1'12
1%
1%
0
F1887
ST
FC
s
-
F1667-13
140
a
I IL
.daih Nll'llblr
afllelwlre
11attopOtOWI'I
lll8pl&
ASTMII:Ientlfier
- ldlmtilills II staal wire,
llat top O'OW1'I $teple
wlll'!ac;rownwldthot
'V.i, a wire 98!'111 ot 14,
a llmgth ot 11/t, 8lld a
b!WU·ftniah.
A•.~m
I. .. CQpper-elad wire
$11181 wlla
s ..
lil•.b!WU.
:Z .. l!lnc coatscl
C "' CIIIIIIIIU Cllll1ad
E .. llhel'rlklally
fn.wiF1
.
etd1ad
tc~
L
T
1J.
TABLE 59
Continued
F1667 STFC
Dash No.
c
G
L
Dash No.
c
G
L
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
V2
14
14
14
14
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
14
14
14
14
14
14
14
14
14
14
14
14
14
16
16
16
F/s
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
3/4
16
16
16
16
16
16
16
16
16
16
14
14
14
14
14
14
14
14
14
14
14
14
14
16
16
16
16
16
16
16
16
16
16
16
16
16
14
14
14
14
14
14
14
14
14
16
16
16
16
16
7/s
'12
1/2
1f2
V2
V2
1/2
1f2
V2
V2
1/2
1/2
1/2
V2
1/2
1/2
1/2
V2
1/2
'12
'12
1/2
V2
1/2
112
V2
V2
1f2
'12
V>
V2
Vz
'12
1/2
3/4
3;4
s;.
3/4
%
3;4
%
3/4
%
3/4
3/4
%
%
%
s;.
%
2
2%
2%
V2
%
%
7/a
1
11/s
1%
1"/s
1 12
1%
1%
1
F/s
2
2%
2'12
1fz
%
%
7!a
1
11fs
1'/•
13/s
1'12
1%
1%
F/a
2
2%
2%
'12
%
%
7/a
1
1'/s
1%
1%
1Vz
1%
1%
F/s
2
'12
%
%
s;.
'%
%
3/4
3/4
3/4
3/4
3/4
3/4
7/s
7/a
7/a
7/a
7!a
7/a
7/a
7/a
7/a
7/a
7/a
'Is
7!a
7/s
7/a
7/a
7/a
7/s
7/a
7fs
7/s
7/a
7/a
7/a
7/a
7/a
15/16
1s;, 6
15/is
"¥16
15/16
1s;, 6
15/16
15/ia
15/16
1 o/16
15/is
15/16
1 o/16
15116
40
George Skarich (Magnum Fasteners) pursuant to License Agreement No further reproductions authorized.
1
11fa
1%
13/s
1%
1%
1%
17/a
2
V2
%
%
7/a
1
1'/s
1%
13/s
1'12
1%
1%
17/s
2
V2
%
3/4
7/a
1
11fs
1%
1%
1'12
1%
13/4
17/s
2
V2
%
3/4
7!a
1
1'/s
1%
13/s
1'12
1/2
o/a
%
7!a
1
cO F1667 -13
F18!1'1
ST
-ldllnti!kls a s~oo~.n.
FC
flat top crown tt8i*
with. Wldlh of
ov..
a lldre gege of 14,
• Jeng1h of 1...... and •
b!W'!t ftnllh.
A • alUminum lldre.
l. ... ilCpPef-dad wlrt
S "' aleel wlrt
a •bt!ght
z,.llillccoated
c "' cement C!l&1ild
e•~
IIWhed
TABLE 59
Dash No.
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
c
1Sf1 6
15/16
15!16
1 o/16
1
1
1
1
Nominal
Maximum
Minimum
Tolerance
±
G
L
16
16
16
16
14
14
14
14
14
14
14
14
14
16
16
16
16
1Vs
1%
1%
1'12
10 Gage
T
w
.1250
.1400
.1290
.1440
.1210
.1360
.0040
.0040
V2
5/a
%
7/a
1
1Vs
1%
1%
1%
V2
%
%
7/s
Continued
F1667 STFC
Dash No.
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
c
13/s
117132
2%
v.
v.
v.
%
%
v.
v.
v.
%
Dimensions and Tolerances for Gages of Flat Top Crown Staples
12 Gage
14 Gage
15 Gage
T
T
w
T
w
w
.0935
.0735
.0673
.073
.0855
.1120
.0975
.0775
.0731
.076
.0895
.1160
.0815
.0895
.1080
.0695
.0615
.070
.0040
.0040
.0040
.0040
.0058
.003
41
G
16
16
16
16
16
12
12
10
18
18
18
18
18
18
18
18
18
16 Gage
w
T
.064
.0563
.068
.0626
.0500
.060
.004
.0063
L
1Vs
1%
1%
1'12
%
3/4
1
3/s
Yo
5/a
3/4
7!a
1
1Vs
1%
1%
18 Gage
T
w
.038
.050
.0415
.0532
.0345
.0468
.0035
.0032
cO F1667 -13
TABLE 60 Type IV, Style 3-Fiat Top Crown StaplesA
NoTE 1-Steel wire, chisel point, tin plated, zinc coated or lacquer finish, as specified, cohered together in strips. (For use in staple tackers or machines.)
The number per strip shall be as specified and shall be suitable for use in the make and model of tool specified.
F 1667
ST
FC
C
05
-
L
-Identifies a cohered flat
top crown staple with a
length of &f1e, a leg
thickness of 0.020, a
leg width of 0.050, a
crown width of 0.500,
lacquer finish.
T =tin plated
L =lacquer
Z = zinc coated
I
1
lacquer
dash number
cohered
flat top crown
staple
ASTM identifier
F 1667 STFCC
Dash No.
A
8
L
01
02
03
04
05
06
07
'h
08
09
o/a
1/2
3/16
1/4
IV1e
1/4
&/,e
%
Crown width, C, tolerances: 0.500
cs
TX W
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
0.020
X
X
X
X
X
X
X
X
X
0.030
0.030
0.030
0.050
0.050
0.050
0.050
0.050
0.050
Dash No.
0.500
0.500
0.500
0.500
0.500
0.500
0.500
0.437
0.437
± O.D15, 0.437 ± 0.010,
end 0.164
L
10
11
12
13
14
15
16
9/18
3fe
112
%
3/4
'lo
1
17
11/a
11/4
18
TxW
0.020
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.030
0.050
0.050
0.050
X 0.050
X 0.050
X 0.050
X 0.050
X 0.050
X 0.050
X
X
X
cs
0.437
0.164
0.164
0.164
0.164
0.164
0.164
0.164
0.164
± 0.015.
TABLE 61 Type IV, Style 4-Round or "V" Crown Staple A
NoTE 1--Steel wire or copper-clad wire, bright finish, zinc coated, cement coated or chemically etched, as specified. (For use in power tools for
fastening wood and other materials to wood.)
F 1667
ST
R
S -
03 Z
round crown ataple
with a crown width of
0.346, a wire gage of
16, a leg length of 1/e,
Zinc coated.
R = round crown
V - V-shapecl crown
S = steel wire
L "' copper-clad wire
B =bright
C = cement coated
E = chemical etch
= zinc coated
IlJ~
steel wire
round crown
staple
ASTM Identifier
z
A
8
Dash No.
cs
G
L
Dash No.
cs
G
L
01
02
03
04
05
06
0.346
0.346
0.346
0.346
0.346
0.346
16
16
16
16
16
16
1/2
.,,.
07
08
09
10
11
12
0.435
0.435
0.435
0.435
0.435
0.435
16
16
16
16
16
16
1f2
IVa
3/4
7/e
1
Crown width tolerances: +0.015 and -0.000.
42
.,,.
11/a
o/4
7/e
1
0
F1667-13
TABLE 62 Type IV, Style 5-Preformed StaplesA
NoTE 1-Steel wire, chisel point, zinc or cement coated, as specified. Copper-clad wire, chisel point, tinned or other plated finish, as specified. (Hand
driven.)
F 1667
ST
P
S -
08
- Identifies a prefonned
steel wire staple with a
length of 3/•, a width
of 3fe, a diameter of
0.083, a point length of
11132, a point angle of
12", and zinc coated.
S = steel wire
C = cement coated
Z = zinc coated
L = copper-clad wire
T =tin plated
0 = other plated
Z
Il~
dash number
steel wire
prefonned
staple
ASTM identifier
Dash No.
01
02
03
04
05
06
07
08
L
c
3/e
7/32
13132
3/18
71••
7132
v.
v.
•J.e
8132
6116
•Ia
11f1e
3/•
3/•
3/a
D
Flatten
Point Length
Point Angle, •
No./lb
0.054
0.067
0.067
0.072
0.072
0.072
0.083
0.083
0.040
0.048
0.048
0.057
0.057
0.057
0.060
0.060
a;,.
13
12
12
12
12
12
12
12
1920
1380
1250
860
800
870
540
410
3/18
v.
'I•
•Ita
•;,.
11/u
11/32
TABLE 63 Type IV, Style 6-Eiectrical StaplesA
NoTE !-Insulated or uninsulated, as specified.
F 1667
ST
P
E
01
-
- Identifies a prefonned
electrical staple with a
length of 3/a, a crown
width of &/32 a diameter of 0.067, a point
length of v•. a point
angle of 12• and.
Insulated.
S = Insulated
N = not insulated
S
JL
dash number
electrical
prefonned
staple
ASTM Identifier
Dash No.
L
c
D
Flatten
Point Length
Point Angie
No./lb
01
02
03
3/e
&/32
3/te
0.067
0.072
0.072
0.083
0.083
0.083
0.083
0.120
0.120
0.048
0.057
0.057
0.060
0.060
0.060
0.060
0.050 X 0.215
0.050 X 0.215
v.
v.
a;,.
12
12
12
12
12
12
12
18
18
1440
990
740
480
450
400
370
04
05
06
07
08
09
112
•;,
3/•
3/•
7/e
71a
1
11/•
'I•
3/18
1/•
v.
7f1e
v.
&/a
"All dimensions are given in Inches.
43
11/32
11f32
11/32
11/32
3/a
o/e
0
F1667-13
TABLE 64 Type IV, Style 7-Preformed Hoop StapleA
F 1667
ST
PH -
01
- Identifies a preformed hoop staple with a
length of 1/2, a width of '12, and a
diameter of 0.072.
dash number
prefonned hoop
staple
ASTM identifier
Dash No.
L
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
1/2
1/2
6/a
6/a
3/4
3/4
1/2
1/2
6/a
6/e
3/4
3/4
1/2
33
34
35
36
37
38
39
40
41
42
43
44
v.
'h
5/a
6/a
6/a
3/4
3/4
•I•
1
1
1
1/a
v.
6/a
5/a
3/•
o/4
7/a
7/a
6/a
5/a
3/4
3/•
7/a
7/a
1
1
c
v.
'12
1/2
1/2
1/2
'h
6/a
5/a
6/a
5/e
6/a
6/e
3/4
3/4
3/4
3/4
3/4
3/4
o/4
3/4
3/•
3/4
3/4
3/•
7/a
7/a
7/a
7/a
7/a
7fa
7/a
7/a
1
1
1
1
1
1
1
1
o/4
11/4
o/4
11/•
11/•
11/•
D
Aatten
No.flb
0.072
0.083
0.072
0.083
0.072
0.083
0.072
0.083
0.072
0.083
0.072
0.083
0.072
0.083
0.109
0.072
0.083
0.109
0.072
0.083
0.109
0.072
0.083
0.109
0.072
0.083
0.072
0.083
0.072
0.083
0.072
0.083
0.083
0.109
0.083
0.109
0.083
0.109
0.083
0.109
0.083
0.109
0.083
0.109
0.057
0.060
0.057
0.060
0.057
0.060
0.057
0.060
0.057
0.060
0.057
0.060
0.057
0.060
0.083
0.057
0.060
0.083
0.057
0.060
0.083
0.057
0.060
0.083
0.057
0.060
0.057
0.060
0.057
0.060
0.057
0.060
0.060
0.083
0.060
0.083
0.060
0.083
0.060
0.083
0.060
0.083
0.060
0.083
720
470
580
430
490
370
670
470
530
400
460
340
580
430
260
490
370
220
430
320
190
350
260
150
530
400
460
340
410
300
360
270
320
200
290
180
260
160
240
140
220
130
180
140
44
0
F1667-13
TABLE 65 Type IV, Style 8-Cap Staples
NoTE 1-Cap staples are Type IV, Style 3, steel, flat top crown, with bright finish or zinc coated (as specified) staples, with a 1 in. diameter plastic
cap having a cap diameter tolerance of ± 0.025 in. Minimum thickness of the outside edge of plastic caps is 0.035 in. Staples are driven with a hand
(swung) or power tool with the staple being driven though the cap at point of application. Staples and caps may be packaged together or separately.
Regardless of packaging, nails and caps are separately loaded into application tools with the staple being driven through the cap at point of application.
F 1667
S1'
C
• 11
z
Identifies a l" pl!l$\k cap with a swel wire, flat t<>p
crown st<~ple with a cr<IW!1 width of 5!16", a win: !!'IS" of
18, a length of 1-J/16'', and a galvanized finish.
tinWI
B -Bright
z
dMI>numbi>r
-Zinc cooted
<3p
stople
,<\STM 10
STC -Sta les-Cap Sets
Dash No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Ga.
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
20
21
24
c
L
'¥16
3/16
%
:y,.
3/16
3f16
3/16
5/16
5/16
5/16
o/16
5/ts
5/16
%
%
%
%
3/a
%
%
%
7/,s
7/16
7/16
7/16
7/1s
7/16
7/16
7/16
%
V2
%
7/a
1
1-'le
1-3/16
1-%
3f4
7/a
1
1-Va
1-"/16
1-V2
5fa
%
7/a
1
1-'la
1-V•
1--o/a
1-'12
%
3f4
7/a
1
1-Va
1-V.
1--o/a
1-112
5/a
5/a
%
SUPPLEMENTARY REQUIREMENTS
The following supplementary requirements shall apply when specified in the applicable table or
when specified in the order or contract (5.1.7). Details of these supplementary requirements shall be
agreed upon in writing between the manufacturer and the purchaser.
Sl. Nail Bending Yield Strength
S 1.1 When specified as a supplementary requirement for
nails used for engineered construction, the nail's average
bending yield strengths shall meet, as a minimum, the yield
strengths used in determining the lateral design loads tabulated
in the AF&PA National Design Specification4 for Wood
Construction, NDS, 4 Part XII: Nails and Spikes.
S 1.2 The minimum average bending yield strengths used by
the NDS 4 as a function of the material and diameter of the nail
are given in Table S l.1 and Table S 1.2.
4
Available from American Forest and Paper Association (AF&PA), 1111 19th
Street, NW, Suite 800, Washington, DC 20036, National Design Specification®,
(NDS® ), for Wood Construction.
45
<0 F1667 -13
TABLE S1.1 Low to Medium Carbon Steel Nails and Spikes
Nominal Diameter, in.
Bending Yield, psi
0.099,; 0.142
>0.142,; 0.177
>0.177,; 0.254
>0.254 s 0.273
>0.273 $ 0.344
>0.344 $ 0.375
100 000
90000
80 000
70000
60000
45000
TABLE S1.2 Medium Carbon Steel Nails-Hardened
Nominal Diameter, in.
Bending Yield, psi
0.120 $ 0.142
>0.142 s 0.192
>0.192 s 0.207
130 000
115 000
100 000
Sl.3 Test Method for Yield Strength-In order to confom1
with the supplementary requirements of S 1, the procedure of
Test Method F1575 shall be conducted on nail samples.
S1.4 At least five nails from each lot of 100 individual
containers shall be examined and tested to determine conformance with this supplementary requirement.
Sl.5 When labeled "Engineered Construction Nails, ASTM
F1667," nails must meet all requirements of Fl667 including
Supplementary Requirements.
SUMMARY OF CHANGES
Committee Fl6 has identified the location of selected changes to this standard since the last issue Fl667-1lael
that may impact the use of this standard. (Approved Dec. 1, 2013.)
( 1) Additional staples (Dash Numbers 226-234) were added to
flat top crown staple Table 59.
Committee F16 has identified the location of selected changes to this standard since the last issue F1667-ll
that may impact the use of this standard. (Approved Nov. 1, 2011.)
( 1) In common nail Table 16 shank description was expanded
from smooth to include both smooth and deformed shanks, and
material description was expanded from aluminum and steel to
include stainless steel.
(2) Additional shank length-diameter combinations were added
to roofing nail Table 29.
(3) In Table 33: Editorial changes made. Description of caps
for hand-driven cap nails was expanded from flat to include
"domed" caps. A minimum thickness for caps for hand-driven
cap nails was added.
ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentioned
in this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the risk
of infringement of such rights, are entirely their own responsibility.
This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years and
if not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standards
and should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of the
responsible technical committee, which you may attend. It you feel that your comments have not received a fair hearing you should
make your views known to the ASTM Committee on Standards, at the address shown below.
This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959,
United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the above
address or at 610-832-9585 (phone), 610-832-9555 (tax), or [email protected] (e-mail); or through the ASTM website
(www.astm.org). Permission rights to photocopy the standard may also be secured from the ASTM website (www.astm.org/
COPYRIGHT!).
Copyright by ASTM Int'1 (all rights reserved); MonFeb 17 10:09:34 EST 2014
46
Exhibit General-5
India Producers
Producer/Exporter
Address of Record
Telephone
Fax
URL
91 44 28295042
91-22-23808500
httQ:{.Lwww.astrotechsteels.comL
httg:L[www.bhansalisteel.com[contact us.
htm
91 (22) +91-22-22834046
httQ:L[www.conexmetals.comL
Ghatala Towers,ll floor( Right Wing), 19
Avenue Road, Nungamtiakkam, Chennai
Astrotech Steels Private Ltd.
Bhansali Bright Bars
Conex Metals
600034, India.
Madhav Bhavan, 150 Nanubhai Desai Road,
Mumbai- 400004. INDIA
91-22-23882320/23865178
1406, 14th Floor, Dalamal Towers, Nariman
91-22-43449300
Point. Mumbai-400 021. INDIA
166, Barwala, New Delhi, Delhi- 110039,
Diamond Galvanizors and Fabricators
91-98102-39969
India
Near Bohra Masjid, Loha Oli, ltwari, Nagpur
+91-712-2779171/ +91-712-2766704
- 440002, Maharashtra, India
Dhujans Engineering Corp.
D-41, Street No. 11, MIDC, Satpur, Nashik422007, Maharashtra, India
91-9850625625
Delta Industries
Eastman lmpex
Gardex
Industrial Area-C, Dhandari Kalan, Ludhiana
91-161-3044000
141014 (INDIA).
D-63, South City-1, Gurgaon 122 002,
91124 426 9922/23
Haryana, India
PLOT NO. H-5, MIDC, AM BAD, Nashik-
Gurnani Metals Pvt. Ltd.
422010, Maharashtra, India
No. 28, Industrial Area, Gangyal Jammu-
91-253-2381428
J&K Wire and Steel Industries
180010, Jammu & Kashmir, India
SHOP NO.- 54, NARAYAN DHURU ST.,
MASJID BAN DAR (W), Mumbai- 400003,
(91)-(191)-2481429
Noble Fasteners
91-22-23112786
Maharashtra, India
Gut No. 45-A, Sawatamali Nagar, Pandhurli,
Ghoti Sinnar Highway, Nashik- 422003,
(91)-9953359928
Maharashtra, India
P.B. Industries
httg:L[www.lgggartsdelta.com
htt~:LLwww.indiamart.comLenguir~.html?
g=diamond-galvanizors-fabricators
httg:L[www.dhujansengineering.com
91-161- 2511600
httg:[Lwww.eastmanimgex.com
91124 426 9921
htt~:[Lwww.gardex.inL
91-253-2384960
3C, Camac Street, Kolkata- 700016, West
Patton International Ltd.
Bengal, India
C-65, Focal Point, Ludhiana- 141010
(+91-33) 2229 4369, 2226 0027
(+91-33) 2226 5448, 2217 2189
htt~:LLwww.~attonindia.comL
Perfect Industry
91-161-2671784, 2676751
91-161-2673784
httg:/_Lwww.gerfectnuts.comL
R.P. Products
Punjab, India.
No.9, Sadgurunagar, Lati Plot, Rajkot360003, Gujarat, India
S.No-275, Sadesatra Nali, Near
Grampanchayat Office, Opp Primary
91 281- 2454023
91 281 - 24S6683
httQ:/_Lwww.chakranails.com
Raj Wire Industries
School, Hadapsar, Gulab Chavan Chwal
Pune- 411028, Maharashtra, India
56, CENTRAL AVENUE, NEAR HOTEL
(+91)-8377800469
Reliable Wires and Engineers Pvt. Ltd.
DARSHAN TOWER, Nagpur- 440018,
Maharashtra, India
4-5, GOLDEN TRADE CENTRE, OLD NH-8,
91-712-2775450/2724254
httg:L[www.indiamart.comlrajwireindustri
esLgrofile.html
91-712-2730071/2724254
OPP. HDFC BANK, Ankleshwar- 393002,
SAl Trading Co.
Gujarat, India
W- 30, Near lndorama Gate No. 1,
Industrial Area, Butibori Nagpur- 441122,
91-2646-650616
http://www.saitradingco.in
Surya Engineering Services
Maharashtra, India
106, Narayan Dhru Street, Shop no . 12,
(+91)-9953361232
http://www.suryaenggservices.com/
Swastik Nut Bolt Company
Ground Floor, Joshi Building, Mumbai- 400
2345 1211 I 2311 2068 I 2352 1268
003.
i
(022) 32112068
httg:L[www.swastiknutbolt.comL
I
~---
India Producers
Producer/Exporter
Univenture Corporation
Weld Wire Technology
Address of Record
Telephone
Plot No. B- 213, MIDC, Sinnar, Nashik+91-2551-23069
422005, Maharashtra, India
4, Sial Layout, Takli Feeder Rd. Nelson
Square, Nagpur, Maharashtra- 440013,
India
91-0712-2594S67
--------- - - - - - - - · - - - -
Fax
URL
httg:[Lwww.indiamart.com[enguir~.html?
g-weldwire
--
--
(91)-(712)~Q6008l_
-
-
-
http://www.indiamart.com/univentureindustries/
Korea Producers
Producer/Exporter
Address of Record
Telephone
Fax
Alteco Korea Inc.
282-2, Suworam-ri, Seotan-myeon,
Pyungtaek-Si, Kyunggi-Do, KOREA
(031)663-8150
(031)663-8151
httg:{Lwww.axia.co.kr
Apex Maritime Korea
1119 Konghang Dong Kangseo Ku Seoul,
157-811 Korea
(822) 2662-6350,2666-4545, 2662-7161
(822) 2662-9200, 2666-0130
http://www.apexshipping.com/officekorea/
URL
41 Yutongdanji 1ro Kangseo Gu Daejeo 2
Bk Fasteners Co.
Dong 102ho 119dong T Plex Busan Korea
Republic Of
Core Fastening
105 Bongcheon Dong Gunnak Seoul Korea
Rm 604 Hyo Bong Bldg 223 lp Jeong Dong
82 10 9533 5360
82 53 289 0912
Dae Sung Abrasive Co., Ltd.
Chung Ku Seoul Korea
224-12, Pyongsan Ri, Ungsan Up, Yangsan
82-2-2263-3311N3
82-2-2263-3314
http://www.abrasives.co.kr /index.html
82-55-3872370
82- 55- 3817904
www.dsnails.co.kr
82-31-499-3549
http://www.daeyong.co. krI
82 - 32 - 8118888
82- 32- 8125818
www.dong~angdiecasting.co.kr
82-55-387-7800
82-55-387-7806
www.duo-fast.com
82 505 980 4988
82 505 988 4988
www.ecosteel.kr
(82)-(17)-5667527
(82)-(17)-3537527
httg:{Lwww.garam01.com
82- 055- 2931018
http://handuk.en.ec21.com/
Daejin Steel Co. Ltd.
Si, Gyeongsangnam Do, South Korea, 626840
2 Ba, 901, ShiWha Industrial Complex, 2203
DaeYong Industries Co.
3, Jungwang-Dong, ShiHeung-Si, GyeonggiDo, 429-926, Korea
82-31-499-3545
663-12 (96B 138 Lot), Gojan Dong,
Dong Yang Diecasting Co., Ltd.
Duo-Fast Korea Co., Ltd.
Namdong Gu, Inchon, South Korea, 405310
333-1, Yusan-Dong, Youngsan-City,
Kyungnam, Korea
55 Gyodae Ro Yeonje Gu Busan Korea
Ecosteel Corporation
Garam Steel Co., Ltd.
Handuk Industrial Co., Ltd.
Hanmi Metals Co. Ltd (Hanmi Staple Co.,
Ltd.)
Hyup Sung Industrial Co. Ltd.
Postal Code 611802
93 Gwangryeocheon Nam Ro Naeseo Eup
Changwon Si Kyongnam Korea
Masan Free Export Zone, 658-10, Bongam
Dong Hoewon ku, Masan, Gyeongnam,
South Korea
#1509-11, DADAE-DONG, SAHA-GU,
BUSAN, KOREA
447-5, Choburi, Mohyun-myun, Yonjin-Gun,
Kyongki, South Korea
031-333-4221 (+82-031-333-4221)
15th Floor Sungji Bldg 538 Do Mapo Gu
lgk Co., Ltd.
Seoul South Korea
SF #165-4 Bujeon-2Dong jin-Gu, Busan
lnno International
Korea
889 1 Dal San Ri lung Kwan Myun Gi lang
Kun Pusan Korea Seoul
Je-il Wire Production Co., Ltd.
Jeil Tacker Co., Ltd.
Jinheung Steel Corporation
Jinsco Commercial Co., Ltd
Jinsco International Co. Ltd.
031-333-8444 (+82-031-333-8444)
http://kor. bizdirlib .com/node/71597
ttp ://panjiva.com/lgk-Co-Ltd/10283464
82-51-808-8850
82-51-980-0501
http://www. innosteel21. com/
82-51-727-5525
82-51-727-5528
httQ:[lwww.jeilwc.co.kr
82 - 2 - 4452506
www.jeiltacker.com
82-51-314-2000
82-51-324-4786
httg:[ljinheungcorQ.co.krL
82 51243 3889
82 51 242 0682
http://jinheungcorp.co. kr/
82-51-243-3889
82-51-242-0682
www.jinheungcorp.co.kr
32 7 Jik Dong Gwangju Si Gyeonggi Do 464
82-2-4452500
090 Korea
15th Floor, Harbour Tower, 113 1, NampaDong 6-Ga, Jung-Gu, Busan, South Korea,
600046
14th & 15th Floor, Harbour Tower, 113-1,
Nampa-Dong 6-Ga, Jung-Gu, Busan, South
Korea, 600046
Busan Harbour Tower, 14FI, 113-1, 6Ga,
Nampa-Dong, Busan, Korea
http://www.hanmimetal.com/aboutus/abo
ut.php
Korea Producers
Producer/Exporter
Address of Record
Telephone
Fax
URL
113-1,Nampo-dong 6-ga ,Jung-gu, Susan
Jinsco Co. Ltd.
K Steel Co.
Karam Steel Co. Ltd.
South Korea 600046
41 5 Uichangdaero 139 Uichang Gu
Changwon Korea
40 Donamgongdan 3 Gil Yeongcheon
Gyeongsangbuk Do Korea
82-051-242-0682
82 10 2962 1077
httQ:[Lkr104056763.fm.alibaba.com
82 505 310 0504
82 514654300
http://ksteel.en.ec21.com/
-'
httQ:{Lwww.koramsteel.comL
41 Jayumuyeok 6 Gil Masanhoewon Gu
Korea Wire Co., Ltd.
Changwon Si Gyeongsangnam Do Korea
82 55 255 2278
286, HO-DONG, NAM-KU, POHANG,
Kosteel Co. Ltd.
Ky & Supply Co. (Ky Supply Company)
GYEONGSANG BUK-DO, 790-380, KOREA
Rm 101 2105 The City 7 Xii Oudae D Ong
Changwon Korea
082-02-2106-0200
082-02-580-8800
htt~:{Lwww.kosteel.co.krL
82-2-34723546
82- 2- 34723549
http://ydsuntr.en.ec21.com/
754-5, Saengchul Ri, Saengnim Myeon,
Gimhae Si, Gyeongsangnam Do, South
http://www.tradekorea.com/e-
Nail Tech Co. Ltd.
Korea
70 B-2L, 639-1, Gojan Dong, Namdong Gu,
82-55-338-9310
82 553389311 I 82 553389310
catalogue/nail255/#. U2KJJ2fjh1M
Peace Korea Co., Ltd.
82 - 32 - 5786611
82- 32- 5786614
http://koreastaple.en.ec21.com/
Rewon Systems
I ncheon, South Korea
1-1321 Shinan Metro Khan,239
Pyeongchondaero,Dongan-gu,Anyangsi,Gyeonggi-do,Korea 431-050
82-70-7752-8061 & 8062
82-31-388-0305
http://www.rewonsystems.com/contact.ht
m
ROYAL METAL INDUSTRIES CO., LTD
#65-8 sosabon-dong, Sosa-gu, Bucheon-si,
Gyeonggi-do
82-2-753-7049
82-2-752-0335
www.rol£almetal.co.kr
Samhee P And P Co., Ltd.
220 6 Anyang Dong Manan Gu Anyang
Gyeonggi Korea
Shin Jeong Corporation
689-805
82-52-254-1672
82-52-263-9646
http://www.shinjeong.co.kr/e/company.ht
ml?sub=map
Shin han tek
55-1 Namsanli Paengseongeup Pyungtaeksi
82-31-691-0110
Gyonggido, Korea
1304 Ace Hightech21 Centum Jungang Ro
82-31-691-0368
http://www.shinhantek.co.kr/eng/intro/int
ro.html
http://panjiva.com/Samhee-P-And-P-CoLtd/1668690
884-1 Bancheon Eonyang Ulju Ulsan, Korea
SM Steel
Spg Co., Ltd.
48 Haeundae Gu Susan Korea
67Siock, 12 Lot, 628-11, Go jan-dong,
Namdong-gu lncheon
Sung Mo Steel
584 22 Yeonsan Dong Yeonje Gu Susa
Susan 26 611 080 Korea Republic Of
http://www.spg.co.kr/eng/sub01/sub0108.
82-32-820-8200
Youngwoo Fasteners Co., Ltd.
#825, 8th Floor, Sungwoo Lakeheim 1332-1,
Baiksuk-Dong, llsandong-Gu, Goyang-City,
82-70-7632
Gyounggi-Do, Korea (410-360)
425-8, Sukok-Ri Paju Eup, Paju Si, Gyeonggi
82- 31- 9024121
Do, South Korea, 413 860
Zeus Techno Inc.
#997 Daecheon- Dong, Dalseo-Gu, Daegu,
704330, Korea
You One Fastening Systems
httQ:[Lwww.sm-steel.comLcomQanl(Qrofile.html#contactus
82-53-585-7128
82-32-821-0383
asp
82-31-8070-7546
http://www. youonefastening.com/aboutus
.html
82 - 31 - 9024122
www.fastenerkorea.com
82-53-585-7180
http://www.zeus-techno.com/
Malaysia Producers
Producer/Exporter
Address of Record
Arah Dagang Sdn. Bhd.
No. 10, Jalan Jasmine 3, Seksyen BblO,
Bandar Bukit Beruntung, Rawang, Selangor,
Malaysia, 48300
Asahan Maju Industries Sdn. Bhd. (Asahan
Maju Nail Factory Sdn. Bhd.)
3-01, Garden Business Centre, No.3 Jalan
lstana, 41000 Klang, Selangor Darul Ehsan,
Malaysia.
Telephone
Fax
URL
Email
http://panjiva.com/Arah-Dagang-Sd nBhd/1016463
http://www.malaysia.com/directory/wholes
ale/othergoods/kelantan/Asahan_Maju_lndustries_S
603-3377 1990 /3377 1991
603-3377 1989
dn. Bhd. 2149S.html
[email protected]
Central Engineers Sdn. Bhd.
Lot Pt 342, Kampung Dusun Raja, Cempaka
Panji, Kota Bharu, Kelantan, 16100
htt(2:/[www.ma laysia.com[directon:[retailaround-the-home[construction-materialshardware-(2aints-andglasslkelantan[Dong Sheng Ja~a Hardware
Dong ShengJaya Hardware Sdn. Bhd.
Sdn. Bhd. 187153.html
Suite 901 A BAnd D 8th Floor Block C
Expediters (Malaysia) Sdn Bhd
Far East Processing By-products Sdn. Bhd.
Hong Kong Industries
Hong Sing Industries (S) Sdn. Bhd.
Wisma Glomac 3 Kelana Ctr Point Selangor
Malaysia
Lot 78, Kaw Perusahaan Senawang, Po ...,
Seremban
Jnmax Sdn. Bhd.
Joint Steel Works Sdn Bhd
bhd .. php
shki.com.hk
P.O. Box 12050,88822 Kota Kinabalu, Sabah 6088-421 600
PT517, Jalan PBR 23, Kawasan Perindustrian
Bukit Rambal,
75250 Melaka, Malaysia.
6088-424 410
606-351 0989
606-351 0987
Impress Steel Wire Industries Sdn Bhd+
Industrial Kawat Sdn Bhd
http://www.basisnet.eom.my/malaysiacompany%26business-credit-informationsearch/far-east-processing-by-prod u cts-sd n.
Lot 930 Km. 16, Mel aka, Melaka, 75350
P.T. 6706, Tuanku Jaafar Industry Estate,
71450 Seremban, N. Sembilan, West
Malaysia.
hsi [email protected]
http://www .impress-steel.com.my/
[email protected]
http://www .malaysia.com/d irectory/manuf
acturing-and-industrialfother-electricalwires-andcable/melaka/lndustri_Kawat_Zubir_H.yuso
If Sdn. Bhd. 229071.html
http://www .in max-fasteners.com/all.htm
TL 60, Batu 2,
Kimmu Trading SON
Lee Tak & Sons Enterprise Sdn Bhd
Jalan Minyak Beku,
83000 Batu Pahat, Johor, Malaysia.
No.12B, 2nd Floor, Brooke Road, P.O. Box
·6 oss- 4321S7
711, 98007 Miri, Sarawak
11Th Mile,Jalan Kuching Bau ( Kranji), Bau,
Sarawak, 94000
6 085 - 418708
d
http://www.malaysia.com/directory/profes
s io na 1-se rvi ces/ non- resid entia 1buildings/sarawak/Lien_Hoe_Lime_lndustri
es_Sdn. Bhd. 136421.html
Lien Hoe Manufacturing Sdn Bhd
LIEN HSIN INDUSTRIES SON BHD
http://www.kimmu.com.my
http://www. miribiz.com/d irectory/genera 1_
contrators/lee_tak_sons_enterprise_sdn_bh
N0.7, LORONG KURAU 17 CHAI LENG PARK
http://profile.customs.alibaba.com/lienhsin-ind ustries-sd n-
PRAI, PULAU PINANG 1370 MY
bhd/201312203S3S46/products.html
Lot 9882, Jalan Harun,
Sek 36, 40460 Shah Alam,
Lim Hoe Industries Sdn Bhd
Madura Fasteners (M) Sdn. Bhd.
Malaysia Steel Works Sdn Bhd
Selangor Darul Ehsan, Malaysia
No.l764, MK 14Jalan BukitTambun, Bukit
Tambun, 14110 Simpang Am pat, Penang,
Malaysia
29C, Jalan Tandang, Section 51,46050
Petaling Jaya, Selangor, Malaysia
http://www.soonhoe.com.my/profile/index
.php
http://www. madurafasteners.com/profile.h
tml
http://www.masteel.com.my/
Malaysia Producers
Producer/Exporter
North Malaya Engineers Trading Co. Sdn
Bhd+
Perusahaan Paku Setia Sdn Bhd
Address of Record
5268, Jalan Permatang Pauh, Mak Mandin
Ind. Estate,
13400 Butterworth, Penang.
Perwaja Steel Sdn Bhd+
Level31, Maju Tower, 1001 Jalan Sultan
Ismail, 50250 Kuala Lumpur, Malaysia
Piu Nam Cheong Hardware Sdn Bhd
No. 8 Gambier Road, Kuching, Sarawak,
93000
Powermat Hardware lnd
PT 6706 Tuanku Jaafar Industry
Region System Sdn. Bhd. (Region Group)
Regional International Co., Ltd.
Rang Mah Group (RM Wire Industries Sdn
Bhd)
Rm1276 Jln Rembia Perkasa 13 T Rembia
Perkasa Rembia 78000 A Melaka Malaysia
Estate 71450 Seremban Negeri Sembilan
Malaysia
Lot 5005, Jalan Meru, 5 1/2 Miles
41050 Klang, Selangor Darul Ehsan
Lot 5005 Jalan Meru 5 14 Miles Port Klang
Selangor 41050 Malaysia
20 & 22, Jalan Arung, Perindustrian Taman
Johor,
81200 Johor Bahru, Johor, Malaysia
Telephone
Fax
URL
Email
604-332 7229/603-40214299
604-3319477/603-40214197
http://www.nmet.eom.my/
[email protected]
603-2772 8988
603-2772 8973
http://www.perwaja.com.my
[email protected]
http://www. malaysia.com/d irectoryfretailaround-the-home/construction-materialshardware-paints-andglass/sarawak/Pui_Nam_Cheong_Hardware
5dn. Bhd. 54846.html
603-3392 7011
603-3392 7001
http://www. reg ionalinternational.com/
607-2362 261/2362 262
607-2362 523/2348 871
Lot 77, Senawang Industrial Estate,
Seremban, Negeri Sembilan, 70450
Seremban Metal Industries Sdn. Bhd.
5ignode Metal [M) 5dn Bhd
Soon Seng Wire Products Sdn Bhd
South Engineers Sdn Bhd+
Syarikat Guan Seng Kilang Paku Sdn Bhd
Tag Fastners Sdn. Bhd.
603-92214133
603-9222 9010
Lot6&7,
Light Industrial Area,
Jalan Perusahaan Kiri,
53200 Setapak, Kuala Lumpur. Malaysia
Lot 23, Jalan PJ5 11/14,
Bandar Sunway,
46150 Petaling Jaya,
Selangor Darul Ehsan,
Malaysia
Tampin Sin Yang Wai Industry Sdn. Bhd.
No. 1081, Jalan Aman 2, Kawasan Industrial
Taman Makmur, Lunas, Kedah, Malaysia
Lot 688, Jalan Usaha 12, Kawasan
Perindustrian Ayeh Kerch, 75450 Melaka,
Malaysia
606-232 0311/232 1311
Terus Maju Enterprise Sdn Bhd
No.29, Jalan P4/6, Ban dar Teknologi Kajang,
43500 Semenvih, Selangor, Malaysia.
Tag Staples Sdn. Bhd.
http://www.rongmah.com/
[email protected]
http://www.malaysia.com/d irectory/manuf
acturing-and-industrialfother-electricalwires-and-cable/negerisembilan/Seremban_Metal_lndustries_Sdn.
Bhd. 113455.html
http:/I d !rectory .stclassifieds .sg/ malaysiadirectory/signode+metal+(m)+sdn+bhd/busi
nesslisting/68405/
http://hongsing.mariniaga.com/main/c_doc
umentdetail.aspx?Key=107&seller=10485&g
odetailid=162#C162
Jln Kapar Batu 5 1/2, 42100 Rantau Panjang
• Selangor
29c, Seksyen 51,
Petaling Jaya, Selangor,46050 Malaysia
No.9, Jalan Satu, Off Jalan Sg. Besi 55200
Kuala Lumpur
http://panjiva.com/Powermat-Hardwarelnd/14483256
http://panjiva.com/PT-6706-Tuanku-Jaafarlndustry/24887877
http://www.swam.org.my/members/region
.htm
[email protected]
http://www.southengineers.com/
[email protected]
http://guanseng.asiaep.com/
http://www. tagfasteners.com.mv/
606-232 0313
www.t-sinyongwai.com
http://www .terusmaju .com.my/index.php/c
ontact-tms
[email protected]
!
Malaysia Producers
Producer/Exporter
Address of Record
Telephone
Fax
lot 68b, Air Kerch lnd'l Area,
Melaka, Melaka, 75450 Malaysia
Wei Oat Wiremesh Netting Sdn Bhd+
Email
http://www .hoovers.com/companyinformation/cs/companyprofile.UH_INDU5TRIE5_5DN_BHD.2112b07
UH Industries Sdn Bhd
Watasan Industries Sdn Bhd+
URL
3fcfe7da3.html
lot 4421, Batu 2, Jalan Minyak Baku, 83000
Batu Pahat, Johor.
607-432 9111
PT 132711, Off Persia ran Kledang Utara 1/5
Kawasan Perindustrian Negara Jaya
Menglembu, 31450 lpoh, Perak
605-282 6220 1 282 7220
lt 1991, Kampong Padang Enggang, Mk
Kota, Kota Bharu, Kelantan, 15100
607-432 9555
http://wirena ilsu pplier.com/
605-282 1220
http://www.weidat.com.my
[email protected]
http://www .malaysia.com/directory/manuf
acturing-and-industrial/other-basic-ironsteelproduct/kelantan1Wyl_sdn._Bhd._176516.h
WYL5dn Bhd
tml
http://www.malaysia.com/directory/manuf
acturing-and-industrial/production-of-pigiron-and-spiegeleisen-in-pigs_-blocks-orother-primaryforms/johor/Yong_Tah_Hong_Enterprise_S
Yang Tah Hong Enterprise Sdn Bhd
Vontai Hardware Sdn Bhd+
Yung Kong Co.Bhd
No. 16, Jalan Bakau, Kluang, Johor, 86000
Lot4679, Batu 7, Jalan Meru 42200 Klang,
Selangor Darul Ehsan
169 Jalan Padungan, 93100 Kuching,
Sarawak, Malaysia
dn. Bhd. 20S27.htm
603-3392 1880
603-3392 2088 13392 1023
http://www.yontai.net
http://www.yungkong.coml
[email protected]
Oman Producers
Producer/Exporter
AIAzzani
AI Buraq Steel Industries, LLC
Gulf Steel Manufacturers llC
Middle East Conversions Industry llC
Muscat Industrial Company, LLC d/b/a
Oman Nails
Oman Fasteners Inc.
Overseas International Steel Industry, LLC
Address of Record
P.O. Box432, Postal Code 512, Buraimi,
Sultanate of Oman
Postal Code 512,Buraimi, Sultanate of
Oman
P.O. Box460, Buraimi, Postal Code 512,
Sultanate of Oman
P.O. Box 406, Postal Code 114, Muttrah,
Muscat, Sultanate of Oman
P.O. Box 2453, Postal Code 112, Ruwi,
Sultanate of Oman
P.0. Box 585, Postal Code 322, Port of
Schar, Sultanate of Oman
P.O. Box 909, Postal Code 512, Buraimi,
Sultanate of Oman
Telephone
Fax
+968 968 0097150-4482082
+968 968 00971-3-7654996
URL
Email
azzaniuaetalhotmail.com
+968 667-7008
terp~cc
+968 2564-2288
+968 2675-1208, +968 2675-1405
+968 2675-1249
+968 2450-2111
+968 2450-3111
http:/fwww.soharsteel.com/index_files/Pag
e544.htm
[email protected]
htte:{Lwww.rkhimjigrou[!:.com(index.htm1 1
mesteel.com
[email protected]
+968 2685-0445
+9714885-7003
http://omanfasteners.com/
infotWomanfasteners.com
.b.t!Jl;JJ9verse~§-~t_eel.cq_m_f_
~e_!i@_oygrse_a_~d~~,_ne_t
+968 2564-1882
Taiwan Producers
Producer/Exporter
A. Jate Steel Co., Ltd.
Allied TCA Enterprise Ltd.
Allprofessional Mfg. Co., Ltd.
Andrew's International Co., Ltd.
Ann-Chain Enterprise Co., Ltd.
Arlen International Corp.
Asian Craft Inc.
Basso Industry Corp.
BCR Inc.
Bestbond International Ltd.
Bonuts Hardware Logistic Co., Ltd.
Canatex Industrial Co., Ltd.
Certified Products International
Certified Products Taiwan Inc.
Charm Grace Ltd.
Cheng Yu Metals Manufactory Inc.
Chiieh Yung Metal Industrial Corporation
China lnternationa l Freight Co., Ltd.
China Mast Forwarders Co., Ltd.
Address of Record
SF-2, No. 395, Sec 1Un Sen Rd., Tainan
#701, Taiwan
No 2-1, Alley 51, Lane 248, Sec. 3,
Zhongxiao East Rd, Taipei, Taiwan
No. 11, 35 Rd., Industrial Park, Taichung
407, Taiwan
Telephone
Fax
URL
Email
+886 6-238-2568
+886 6-238-2586
http://www. ajscomp.com. tw/
[email protected]
+886 4-2359-8429
+886 4-2359-8430
http://www .allpro.com.tw/
+886 2-2521-8397
http://www .and rewco.com/
[email protected]
+886 4-7S2-1293
http://www .a nn-chain.com/
annchai_n_@_msB.hin_et.net
10F., No. 96, Sec. 2, Zhongshan N. Rd.,
1+886 2-2531-0448
Zhongshan Dist., Taipei City 104, Taiwan
No. 65-5, Lane 540, Yoan-Fong Rd., Chang
Hua City, Taiwan
1+886 4-7S2-1297
Fl. 3, No. 622, Chung Shun N. Rd., Sec. 5,
Taipei, Taiwan
+886 2-2834-2505
SF, 97 Nanking East Rd., Sec. 2, Taipei,
Taiwan
1+886 2-2541-5843
No. 24, 36th Rd., Taichung Industrial Park,
Taichung, Taiwan
+886 4-2350-0628
10F-4, No. 615, Sec. 2, Datong Rd., East
Dist., Tainan, Taiwan
1+886 6-268-4266
2F., No. 145, Mingren Rd., Sanmin District,
1+886 7-616-5000
Kaohsiung City 807, Taiwan
4FL, No. 399, Sec. 5, Nan-King East Rd.,
Taipei, Taiwan
1+886 2-2764-0335
No. 253, Linding St., Rende Dist., Tainan City
1+886 6 270-5696
717, Taiwan
2 Floor 2, No. 31 Haibian Road, Kaohsiung
802, Taiwan
+886 7 537-5959
llf, No. 31 Haibian Rd., Lingya Dist.,
Kaohsiung 80248, Taiwan
3F, No. 27, Lane 154, Xingyi Rd., Beitou
District, Taipei City 112, Taiwan
No 713, Chungcheng Rd., Hsinchuan Dist.,
New Taipei City, 24261, Taiwan
+886 2-2901-2111
22 2nd Fl., No. 31, Haipien Rd., Ung Ya
District, Kaohsiung, Taiwan
1+886 7-338-2509
10F, No. 139, Sec. 2, Nanking E. Rd., Taipei,
Taiwan
10 Fl., No.2, Sec. 4, Jen-Ai Rd., Taipei,
+886 2-2701-1111
Taiwan
I
China Staple Enterprise Corporation (China 1366 Tal Ming Rd., Pai U Vill., Taichung City,
Staple Enterprise Tianjin Co.)
Taiwan
1+886 4-2335-1046
19F, No. 615, Sec. 2, Ta Tung Road, Tainan,
Taiwan
Chite Enterprises Co., Ltd.
+886 6-289-2423
14F, 19-13 San Chung Rd., Taipei 11543,
Concord International Engineering &
+886 2-2655-2299
Taiwan
Trading Co., Ltd.
Crown Run Industrial Corp.
Daao Chi Industry Corp.
Damco Taiwan Co., Ltd.
Dar Yu Enterprise Co., Ltd.
De Hui Screw Industry Co., Ltd.
Dolphin Logistics Co., Ltd.
No.3, Lane 111, Sec. 3, Min Sheng Rd., Taya
Hsiang Taichung Hsien, 428 Taiwan
No. 178, Lane 275, Shuenn An Rd., Lu Chu,
Kaohsiung City, Taiwan
llF., No.2, Sec. 1, Dunhua S. Rd., Songshan
Dist., Taipei City 105, Taiwan
No.19, Gongye 2nd Rd., Renwu Dist.,
No. 95, Pai Shih Chou Ming Ho Viii., Tainan
70955, Taiwan
SF, No. 308, Sec. 2, Bade Rd., Zhongshan
Dist., Taipei 10492, Taiwan
+886 2-2834-49S7
[email protected]
+886 2-2S37-133S
+886 4-2359-8880
http://www.basso.eom.tw/
+886 6-268-4265
http://www .bcr.com.tw/
[email protected]
lm~rv .hua o.R@bcr .com. tw
+886 7-616-6000
+886 2-2764-0199
http://www.masterun.eom.cn/organization
6.htm
+886 6 270-5710
http://www .canatex.com.tw/
·ac~_@__certified.com,tw
+886 7 537-5500
+886 2-2904-4635
I1Q4@_canatex.com.tw
http://www.megaknives.com/
in_quiry_@_megaknives.com
+886 7-338-2516
+886 2-2701-1833
+886 6-289-2290
http:/fwww .cif.com. tw/in dex2.asp
http://www .chinaseagroup.com/en/taibei.h
tml
[email protected]
http:/ /www.tradetaiwan.org/WebSiteTemp/en/a1.aspi'v_id=7
0513427
http://WWW .chite.com. tw/chite/en/index.ht
[email protected]
m
+886 2-2655-1248
[email protected]
1+886 4-2566-6669
+886 4-2566-6687
h~p:/ /www .crown ru n.com/web/index. php lcrown.run@msa. h inet.net
1+886 7-696-8956, +886 7-696-8957
+886 7-696-8958
+886 2-2775-2111
1+886 7-372-3001
+886 2-2775-3319
http://www.damco.com/
+886 7-312-1014
http://www .dar-yu .com.tw/
+886 2-8772-3599
http://www.dolphin-gp.com/
1+886 6-578-3015
+886 2-2545-9900
[email protected]
Taiwan Producers
Producer/Exporter
Eagre International Trade Co., ltd.
Easylink Industrial Co., Ltd.
ECI Taiwan Co.
Encore Green Co., ltd.
Everflow Industrial Supply Corp.
Everise Global logistics Co., Ltd.
Excellent Vi-Der Trading Co., Ltd.
Faithful Engineering Products Co. Ltd.
(ApllFaithful)
Fastenal Asia Pacific Ltd.
Fastic Transportation Co., Ltd.
Four Winds Corporation
Fu ko Fastener Co., Ltd.
Gee Bridge International Inc.
Gofast Co., Ltd.
Goldson International Co., Ltd.
Grand Fit Co. Ltd.
Han lien International Corp.
Hanten International Co., Ltd.
Hardware Square Enterprise Co.
Homade Inc.
Home Value Co., Ltd.
Address of Record
4F, No. 334, Chang Sheng Rd., Ku-Shan
District, Kaohsiung, Taiwan
6F, 284 Chung Cheng, 1st Rd., Kaohsiung
802, Taiwan
11th Floor, No. 181, Fu Hsing North Rd,
Taipei, Taiwan
3rd Fl., No. 86, Sec. 1, Roosevelt Rd., Taipei,
Taiwan
16 Fl., No. 401, Chung-5huan Rd., Sec. 1,
Chuang Hua City, S0058, Taiwan
10/F & 11/F, No. 88 And 11/F, No. 90,Sect.
2, East Nanjing Road, Taipei, Taiwan
lF, No. 64, Cherng Deh Road, Tainan,
70143, Taiwan
3F, No. 1, Lane 270, Pei Shen Rd., Shenkeng
222, Taiwan
434 Gangshan Rd., Sth Floor Suite 0,
Gangs han Township, Kaohsiung County,
Taiwan
4F 2, No. 103, Sec. 4, Nanjing East Rd.,
Taipei 10580, Taiwan
12F, No. 176, Keelung Road, Section 1,
Taipei 110, Taiwan
184 Ming Tsu E. .Rd., Taipei, Taiwan
5th Fl., No,44, Lane 80, Nan-Kang Rd., Sec.
3, Taipei, Taiwan
24F-2, No. 8, Min-Chuan 2nd Rd.,
Kaohsiung, 80661 Taiwan
7F 2, No. 4S2, Shou Feng Rd., Nan Tzu Dist.,
Kaohsiung City, Taiwan
No. 366, Tai Min Rd., Wu Jih Hsiang,
Taichung Hsien, Taiwan
F1.13-2, No. 101, Jen AI Road, Sec. 4, Taipei,
Taiwan, 106
3F-1, Chung Nan Building, 259, Sec. 1, Fu
Shin South Road, Taipei, Taiwan
3f No 668 Sec 2 Wu Chuan W Rd Taichung
Taiwan
Telephone
Fax
URL
+886 7-553-9000
+886 7-553-6055
+886 7-725-1034
+886 7-723-3002
[email protected]
http://www.easylin k.com. tw/world/index.h
[email protected]
tml
+886 2-2713-2145
+886 2-2716-9534
+886 2-3969-9589
+886 2-2392-4649
+886 4-762-3200
+886 4-762-7741
http://www .everflowind .com/index.php
+886 2-2542-1369
+886 2-2542-3586
http://www .everise.com.tw/en/home.htm
+886 6-289-4592
+886 6-289-4511
http://www.yider.com/
+886 2-2662-4717
+886 2-2664-3841
http://www.faithful.eom.tw/
Email
serena.huan~?ra>expeditors.com
[email protected]
[email protected]
fe~co@faithfu l.com.tw
http:/ /www.fastenal.com/web/home
http://fasticgroup.com/En/Basel nfo.aspx
+886 2-2591-2113
+886 2-2591-8347
http://www.4winds.eom.tw/
http://www. fu kofastener.com. tw/
fu ko@fu kofastener.com. tw
+886 2-2651-8806
+886 2-2786-5465, +886 2-2786-4983
http://www.geebridge.com/
sales@g:eebridee.com
+886 7-536-3200
+886 7-536-3280
http://www.gofast.com. tw/
www.hanlien.eom.tw/
[email protected]
!
No.3, Alley 2, Cherng Gong Street. Hsin Shih
Hsiang, Tainan, Taiwan, 74441
2F, No. 32-1 Sung-Kiang Rd., Taipei 10455,
Taiwan
Hor liang Industrial Corp. (Yu Chi Hardware No. 72, Lane 420, Sec. 5, Lucao Rd., Lugang
Co., Ltd.)
Town, Changua County SOS, Taiwan
10, Lane 551, Wan Shou Road, Sec. 1,
Kweishan Hsiang, Taoyuan Hsien, Taiwan,
Hsin li Industrial Co., Ltd.
33346
Hsuanhow Enterprises Inc.
3f No 290 Fu Hsing N Rd Taipei Taiwan
22F~2, NO. 698, Sec 4, Wen Shin Road,
Taichung, Taiwan, 406
Huang Buffalo Co., Ltd.
No.5, Lane 408, Sec. 2, Chang Ho Road,
Hui Baa Enterprise Co., Ltd.
Changhua, Taiwan
Room 815, SF, 152, Sungchiang Road,
Taipei, Taiwan, 104
Hwa Fang Rubber lnd.,Co. Ltd.
Sf No 168 Tzyou 2nd Rd Zuoying District
Hwally Products Co. Ltd.
Kaohsiung Taiwan
+8864-771-1283
+886 4-771-2061
http://www .coilnail.com. tw/
http://www.hwally.eom.tw/
10
[email protected]
Taiwan Producers
Producer/Exporter
Address of Record
Telephone
Fax
URL
Email
10F-2, 288, Erh Sheng 1st Road, Kaohsiung,
Hyperkey International Inc.
Taiwan, 806
Integral Building Products Inc.
744 Taiwan
2f No 55 Fuqiang Rd Xinshi Dist Tainan City
14F, No. 95, Sec. 2, Dunhua S. Road, Da-An
Interactive Corporation
District, Taipei, Taiwan, 10682
10 F, No. 200 Sung Chiang Road, Taipei,
J. C. Grand Corporation
Taiwan
No. 100 Chiahsin E Road, Kangshan,
Jau Yeou Industry Co., Ltd.
Kaohsiung, Taiwan
No 2 1 Alley 51 Lane 248, Sec 3 Zhongxiao
Jch Hardware Co. Inc.
East Rd, Taipei, Taiwan
Jorng Well Industrial Co., Ltd.
Tainan, Taiwan, 71142
Js Supply Inc.
Kaohsiung 803 Taiwan
No. 6, Sec. 3, Baoda Road, Kuwi Jen Hsiang,
15 FloorS No 239 Sihwei 4th Ro Kaohsiung
+886 2-282-9105
No 12 Alley 45 Lane 380 Sec 3 Jhonghua E
K Win Fasteners Inc.
Rd Tainan 701 Taiwan
www.kwin.tw/
134, Yao Shan Street, San Min District,
K. Ticho Industries Co., Ltd.
Kaohsiung, Taiwan, 807
6th Floor, No. 2, Sector 3, Min Sheng East
K.e. & Kingstone Co.,ltd.
Road, Taipei, Taiwan
Kai Suh Suh Enterprise Co., Ltd.
Taiwan, 103
No. 38, Yen Ping North Road, Sec. 1, Taipei,
NO 50 FU XING ROAD LU CHU DIST
Katsuhana Fasteners
KAOHSIUNG 82147 TAIWAN
http://www.b2bscrews.c6m/
llf No 137 Nanking E Rd Sec 2 Taipei
King Freight International Corp.
Taiwan ROC
+886 2-2S18-3311
+886 2-2518-032S
No. 21, Sec. 1, Baoan Road, Rende Town,
King Shing Steel Enterprise Co., Ltd.
Tainan, Taiwan
King Well Express Inc.
Taiwan
21 1 No 80 Chang An E Rd Sec 2 Taipei
+886 2-S045-5534
No 5 Alley 2 Lane 365 Sec 2 Chung Shan Rd
Ku Ping Enterprise Co., Ltd.
Chungho Taipei Taiwan
Kuan Shin Screw Industry Co. Ltd.
Tainan Hsien, Taiwan
116-12, Liu An, Liu An U, Chia LiChen,
+886 6-726-81SS
+886 6-726-89S9
+886 2-2544-5000
+886 2-2713-3591
portal.com/locationsfasia pacific/taiwan/
+886 6-S99-16S6
+886 6-599-2304
http://www.lcnail.com. tw/
[email protected]
+886 7-372-8229
+886 7-371-1604
www.longtsan.com.tw/
[email protected]
4 F, No. 219, Nanking East Rd., Taipei
Kuehne & Nagel Inc.
10488, Taiwan
http://www.kn-
2f 2 No 31 Haibian Rd Kaohsiung Taiwan
L & L Building Products Industry
802 R 0 C
lgd Li Guang Da Co., Ltd.
No 63 Wenhua Rd Tainan City 70174 Taiwan +886 6-289-7742
Liang Chyuan Industrial Co. Ltd.
City 744, Taiwan
No. 323-100, Tanding, Xinshi Dist., Tainan
No.18-1, Feng Ren Road, Ren Wu Hsiang,
Long Tsan Metal Ltd.
Kaohsiung, Taiwan
Markprofit Ltd.
Township Tainan County 726 Taiwan R 0 C
No 28 Lane 130 Jianguo Rd Syuejia
4F, No. 399, Section 5, Nanjing East Road,
Master United Corp.
Songshan District, Taipei, Taiwan, 105
www.masterun.com.cn
No 235 Wandan Rd Daliao Shiang Kaohsiung
May And Hsein Inc.
County 831 Taiwan
11, Alley 17, Lane, 262 Chung Chern Street,
Midas Union Trading Co., Ltd.
Kangshan, Kaohsiung, Taiwan, 820
midas.com.tw
10Fioor, No. 428 Min Chuan 2nd Road,
Newrex Screw Corporation
Kaohsiung, Taiwan, 806
11
Taiwan Producers
Producer/Exporter
Address of Record
Telephone
Fax
URL
+886 2-8161-1688
+886 2-2778-8600
concord.com.tw/en version/index.aspx
Email
13f No 103 Longs han St East Dist Tainan
Nslnternational Ltd.
Odyssey International Co., Ltd.
70169 Taiwan
7 Fl No 72 Sec 2 Nanking E Rd Taipei Taiwan
4th Floor, 56 Danhua North Road, Songshan
Pacific Concord International Ltd.
Dist., Taipei City 105, Taiwan
http://www.pacific~;[email protected]
No. 162-1, Shen Chiao Road, Da-Tsun
Pao Shen Enterprises Co., Ltd.
Hsiang, Changhua, Taiwan, 51541
No.8, Guang Fu Road, Chia Tai Industrial
District, Tai Bao City,
Passion Trading Co.
Chia Vi County, Taiwan, R.O.C.
http://www .otcfastener .com/
llf No 77 2 Sec 2 Zhongzheng E Rd Tamsui
Patek Tool Co., Ltd.
Dist New Taipei City Taiwan 251
+886 2-2809-9706
+886 2-2809-4547
+886 4-7586-0080
+886 4-758-6756
7F-2, No. 87, Ning Po West Street, Taipei,
Pengteh Industrial Co., Ltd.
Taiwan, 10075
Ltd No 139 Yonglong 2nd St Dali Dist
Peter Sources International Co., Ltd.
Taichung City 412
No.7, Jingke 6Th Rd., Taichung PrecIsian
Pneumax Corp.
Machinery Park Taichung Taiwann
10f 1 No 10 Sec 3 Dalian Rd Beitun District
Point Edge Corp.
Taichung Taiwan
President Industrial Inc.
PT Enterprise Inc. (Pro Team Coil Nail
Taiwan
No 1 Zhangbin E 8th Rd Xianxi Shiang
No 12 2 Hsing Veh Rd Hsin Shi Tainan
Enterprise Inc.}
Changhua County 507 Taiwan
2f 1 No 1 Ln 122 Pingde Rd Bei Taichung
Quick Advance Inc.
406Taiwan
Quinn International Corp. Ltd.
No. 54, 7 F, Chunghsiao East Road, Sec 1,
Taipei, Taiwan, 100
http://www.pro-team.com.tw
[email protected]
15st Floor Tower 1 The Gateway Harbour
Rich State Inc.
Ray Fu Enterprise (Chen-Nan Iron Wire Co.,
City Tsimshatsui Kowloon
23F-1, No. 366, Boai 2nd Road, Tso Ving
ltd)
District, Kaohsiung City 81358
No. 641, Chung-Hwa Road, Shengang
Romp Coil Nail Industries Inc. (Romp
Enterprise Co., Ltd.)
Township, Changhua County, Taiwan
2nd Fl No 204 Sec 2, Hsing Lung Rd, Taipei,
SAnd P International Ltd.
Taiwan
3f No 49 Sec 3 Ming Sheng E Rd Taipei 104
Schenker (H.K.) Ltd. Taiwan Branch
Taiwan
http://www.ray-fu.com/
+886 4-798-9280
+886 4-798-2174
http://romp.eom.tw/
[email protected]
+886 5-238-0959
+886 5-238-1569
http://www.soonport.com/
info@soon[;!ort.com
1f No 500 Shengsen Rd Kangshan Township
Six 2 Fastener Imp. Inc.
Kaohsiung County 820 Taiwan
10F-7, No. 736, Chung Cheng Road, Chung
Somax Enterprise Co., Ltd.
Ho, Taipei, Taiwan, 23546
No. 87, Lane lOS, Sec. 2, Beigang Rd.,
Soon Port International Co., Ltd.
Taibau City, Chiayi County 612, Taiwan
9fl No 5 lane 345 Yangguang St, Neihu
Sound best International Sourcing
District, Taipei, Taiwan
Spring Lake Enterprise Co., Ltd.
14, Chienfu Road, Neipu Industrial Park,
Neipu, Pingtung Hsien, Taiwan, 912
Steel Stone Co., ltd.
Township Kaohsiung 824 Taiwan
Sun Chen Fasteners Inc.
2F, No. 301, Yu Ping 1 Street, East District,
Tainan, Taiwan, 701
Sun Hold Electric lnc.
Hsien Taiwan
No 28 Lane 671 Anjhao Rd Yanchao
No 246 Lian Cherng Rd Chung Ho City Taipei
12
Taiwan Producers
Telephone
Fax
+886 7·696-0081
+886 7-696-9921
+886 2-2561-7665
+886 2-2561-7658
Trans Wagon International Co., Ltd.
Taiwan
Transwell Logistics Co., Ltd.
6f 7 No 33 Jianguo N Rd Sec 2 Taipei Taiwan +886 2-2506-2226
+886 2-2505-7546
Trim International Inc.
21/F, 508, Chung Hsiao East Road, Sec. 5,
Taipei, Taiwan
Producer/Exporter
Address of Record
URL
Email
No 30 Ln 296 Xinya Rd Qianzhen Dist
Sunon.lnc.
Kaohsiung City 80673 Taiwan
16fl No 162 Sec 5 Nanking E Rd Taipei
Tai Tools lnd.Co. Ltd.
Taiwan
Taikyu Co. Ltd.
No.112, Jhongshan S. Rd., lujhu Dist.,
6th Floor, 88, Nanking East Road, Sec. 2,
Taiwan Fertilizer Co., Ltd.
Taipei, Taiwan
No 2 lOf No 123 Sec 3 Ta i Chung Kang Rd
Taiwan Wakisangyo Co., Ltd.
Taichung
12th Floor No 168 Fu Hsing N Rd Taipei
Tarco International Inc.
Taiwan
Team Builder Enterprise Ltd.
District Taiwan 407 Taiwan
lf No 539 Cuei Hwa Rd Gu Shan District
6f 1 No 76 Lane 18 Shang An Rd Situn
Tew Industry Co., Ltd.
Kaohsiung Taiwan
404 Rm. B, No. 44, Sec. 2, Zhongshan
TG Co
District, Taipei City 104, Taiwan
http://www.tgnet.com.tw/
6f 2 No 142 Sec 4 Zhong Xiao E Rd Da An
Topocean Consolidation Service Service Ltd. Taipei 106 Taiwan
Trans Top Enterprise Co., Ltd.
3f 25 Lin Chuan St Kaohsiung Taiwan
7th Fl No 103 Sec 3 Nan King E Rd Taipei
Unicatch Industrial Co., Ltd.
No. 99 Nan Kan 3rd Road.. Nan Tou, Taiwan
!
+886 4-225-4678
SF., No.1, Sec. 4, Jen-Ai Rd., Da-an Dist.,
UPS Supply Chain Solutions (Taiwan)
Vim International Enterprises Co., Ltd.
Tapei City 106, Taiwan
6f No 192 Dadun Rd Nantun District
+886 2-2772-4232
Taichung City Taiwan Roc Twtch Tw
+866 4-2473-5395
+866 2-2731-1211
http://www.ups-scs.com/
[email protected]
I
56 Lane, Chien Kuo Rd., Kaohsinug Hsien,
Walth Industry & Business Co. Ltd.
Fenhshan City 80262, Taiwan
Wellfly Enterprise Co., Ltd.
6 F, No. 67, Ta Chang 2nd Road, Kaohsiung,
Taiwan, 807
I
+886 7-7021-0029
wellfly.com.tw
No 512 Lane 19 Chung Hsiao St Chung Ho
Win spear Enterprises Inc.
City Taipei Hsien Tw
I
No 9 Rixin Line Dashe District Kaohsiung
+886 352-6561
WTA International Co.
Kaohsiung 815 Taiwan
Yeun Chang Hardware Tool Co.
No. 16, Goneye E. 2nd Rd., Lu-Kang, ChangHua, 508, Taiwan
+886 4-752-6921 +886 4-752-6766
+886 4-761-1000
http://www.ycnail.com/
thumbnail@vcr,ail.com
I
Vu Tai World Co., Ltd.
No 6 Longchuan St Miaoli City Taiwan
No 89 Min Sheng Rd Ta She Hsiang
I
Zan Mon Co., Ltd.
Kaohsiung Hsien Taiwan
I
13
Turkey Producers
Telephone
Fax
URL
90-324-3286500
90 - 324- 2340961
http://www.akdenizcivi.com/
No:2 Sel~uklu/KONYA
1456 Sokak No 16 Barchan Ish ani lzmir 35
0090 3322390129
90 (332) 239 07 59
http://www.akisasansor.com.tr/
Ans Kargo Lojistik Tas. Ve Tic. Ltd.
35220 Turkey
90 232 464 43 42
90 232 464 02 28
httQ:{Lwww.anscargo.com
Asian bas Civi Tel Celikhasir SAAs
Adana Organize Sanayi Bolg Cukurova Cad
No 1 Adana Turkey
Organize Sanayi Bolgesi 2, Cadde No. 1 ,
322 3110482
90 322 3113 488
http://www.aslanbas.com.trI
Producer/Exporter
Akdeniz Nail Wire Co (Adkeniz Civi Tel
Address of Record
Nakliyat San.) (Akdeniz Civi ve Tel)
Province, Turkey, 33130
Gazi Mah. 1324 Sk. No.4, Yenisehir, Mersin
OSB, Kayacik mah. Ziyaeddin cad. 6.sokak
Akis Asansor Makina Motor Dokum San
Beksan Nail & Wire Co. (Beksan Civi Tel
Balikesir, <;anakkale Province, Turkey,
Mak lml San Tic As)
10100
Akcaburgaz Mah 1632 Sok No 36 Esenyurt
Istanbul Tr
Febko Kabara Ve Zimba Ltd.Sti.
httQ:{Lwww.beksan.comL
90 212 886 7549
90 212 886 7470
http://www.febkokabara.com/
+90 (328) 826 85 09
httQ:{Lwww.imcgalvaniz.com.trL
O.S.B.Biiyiik Tiiysiiz Kiiyii Civan 104 Ada 9
IMC Galvaniz (IMC Galv.Tei.San.Tic. A.S)
M.Bakizade lhracat District (M.Bakizadeith
lhr Dis Tic Komisyon)
Metal AT [Metal At Ve Tel Urunleri Tic Ltd.
+90 (328) 826 85 22
Parsel Toprakkale / OSMANiYE
Savas Mah S Pamir Cad Bakizade Ish Hatay
90-534-7950615
3131000 Turkey
90-326-6134883
E5 Karayolu Uzeri Kurudere Mevki Ku Hatay
St]
3131600 Turkey
Bayar Cad. Gulbahar St. Perdemsac Plaza,
90 326 71815
90 326 71815
httQ:[Lwww.metalat.com.trL
Metal Market International Steel Co
Bostancl/lstanbul TURKEY
3 Org San Bolg Baspinar Gaziantep
90-216-373-9050
90-216-463-6865
httQ:{Lwww.metalmarket.com.tr
Raye Hali lth.lhr.Dis Tic. A.S
Gazianteptr Turkey
0342 3379585
Tipo Tel Raptiye San Tic Ltd. Sti
29 Ekim Mah. izmir Caddesi No: 20
Yaz1ba~1/Torbah iZMiR- TURKiYE
232 2510345
90-232-2513783
http://www.tipotel.com/en_kurumsal.aspx
?id=1
14

F1667 -13

Transcription

Similar documents

2016 BUYER`S GUIDE - Fastener World Inc.

Commonwealth of Australia ASIC Gazette 96/08 dated 2 December