techno - Bradley Hughes

VALVES & MEASUREMENT
TECHNO™ Multi-Purpose Check Valves
for Industry
TECHNO™
VALVES & MEASUREMENT
2
TECHNO™
BRP-TEC-GENERAL-01
10/11 SWP-3M
VALVES & MEASUREMENT
TABLE OF CONTENTS
TECHNO™ MULTI-PURPOSE CHECK VALVES FOR INDUSTRY
Introduction................................................................................................... 4
Elastomer Hinge Designs................................................................................ 5
Elastomer Hinge Design................................................................................. 6
TECHNO’s Metal Hinged Design..................................................................... 7
How to Order................................................................................................ 8
How to Order................................................................................................ 9
Aftermarket Services...................................................................................... 10
Trademark Information.................................................................................. 11
BRP-TEC-GENERAL-01
10/11 SWP-3M
TECHNO™
3
VALVES & MEASUREMENT
Oklahoma City,
Oklahoma
Cameron’s Valves & Measurement (V&M) group is a leading provider of valves
and measurement systems to the oil and gas industry. The group’s products are
primarily used to control, direct and measure the flow of oil and gas as it is moved
to refineries, petrochemical plants and industrial centers for processing.
The Distributed Valves division provides valves products that are sold through
distributor networks worldwide, for use in both oil and gas and industrial
applications and include such widely recognized brand names as DEMCO®,
NAVCO®, NUTRON®, Thornhill Craver®, Techno®, TOM Wheatley®,
Wheatley® and WKM®.
The design features of Techno’s elastomer hinge and metal hinge check valve
including a tight shutoff feature, and the ability to be mounted in almost any
position. TECHNO Check Valves are known for their ease of maintenance and
exceptional flow characteristics. TECHNO provides economical and dependable
multi-purpose check valves for use within a wide range of service conditions.
4
TECHNO™
BRP-TEC-GENERAL-01
10/11 SWP-3M
VALVES & MEASUREMENT
TECHNO™ MULTI-PURPOSE CHECK VALVES FOR INDUSTRY
Elastomer Hinge Designs
Full Flanged
125#, 150# and 300#
Available in sizes 1” - 48”
The Short Form (SF) Wafer
Is the perfect design for Air Service and Light Duty.
Liquid applications. Available in sizes 1” - 72”
Male Threaded Ends, Grooved Ends & Plain Ends
Available in sizes 1” - 20”
Deep Well
Female threaded valve designed for deep Well.
Applications down to 1000 ft.
Available in sizes 1” - 12”
BRP-TEC-GENERAL-01
10/11 SWP-3M
TECHNO™
5
VALVES & MEASUREMENT
TECHNO™ MULTI-PURPOSE CHECK VALVES FOR INDUSTRY
ELASTOMER HINGE DESIGN
C
D
E
A
G
F
B
DESIGN FEATURES:
A. FULL PORT
Provides maximum flow with minimum pressure loss.
B. VALVE PLATES
Offers metal support and minimum travel.
C. SEALING MEMBER Provides tight shut-off and prolonged cycle life.
D. HINGE POST
Precision air foil design offers streamlined flow.
E. TRAVEL STOP
Prevents over-travel of plates. Location is size dependent,
smaller valves have stops attached to hinge clamp.
F. CLAMP PLATE
Provides added support.
G. HINGE CLAMP
Remains stationary, no metal components around hinge
post rotation.
Unrestricted Full Port Seatless Design
•
•
Maximum flow area
Minimum pressure drop
Elimination of Metal-to-Metal Rotating Parts
•
•
•
No pins to wear
No seats to wear
No spring to break
Non-Slam Quick Closure Feature
•
•
inimum travel of valve plates from full open
M
to full closed position reduces closing time
Elimination of spring restricts “slamming”
action
Tight Shut-Off Feature
•
•
Flexible elastomer provides perfect seal
Seals tightly at extremely low back pressure
Can be mounted in almost any position
Standard Materials & Configuration
Elastomer Materials
Body
Internals
Aluminum
Aluminum
Buna-N
-60°F to 225°F
Male Threaded Ends
Brass
Brass
EPDM
-40°F to 225°F
Female Threaded Ends
Cast Iron
316 Stainless Steel
VITON
-20°F to 400°F
Plain Ends
SILICONE
-100°F to 500°F
Grooved Ends
Carbon Steel
316 Stainless Steel
Materials
Temperature Range*
Body Configuration
Flanged Ends
Wafer Style
* T
emperature range is for general guidance. The figures may vary with application and body/internal materials. Consult factory for materials, sizes and
pressure ratings not shown as standard.
6
TECHNO™
BRP-TEC-GENERAL-01
10/11 SWP-3M
VALVES & MEASUREMENT
TECHNO™ MULTI-PURPOSE CHECK VALVES FOR INDUSTRY
TECHNO’S METAL HINGED DESIGN
Clamp Plates
The industry has long awaited the dual plate metal
hinged check valve that offers the innovative features
Replaceable Seals
(5050 & 5051 Only)
of the new TECHNO design.
The ease of maintenance, the exceptional flow
Body
characteristics and increased safety by elimination of
Valve Plates
body leakage, allows this check valve to be a valve of
Springs
choice industry-wide.
Shaft
Thrust Washers
Flow
Shaft Supports
Standard Models & Materials of Construction
Style
Body
Valve Plates
Seals
Springs
Trim*
ASME Class
5050
Cast Iron
Bronze
EPDM
316 Stainless Steel
316 Stainless Steel
125
5051
Carbon Steel
Carbon Steel ++
Buna-N
316 Stainless Steel
316 Stainless Steel
150
5051-316
316 Stainless Steel
316 Stainless Steel
Buna-N
316 Stainless Steel
316 Stainless Steel
150
5053
Carbon Steel
Carbon Steel ++
Buna-N
316 Stainless Steel
316 Stainless Steel
300
5053-316
316 Stainless Steel
316 Stainless Steel
Buna-N
316 Stainless Steel
316 Stainless Steel
300
5056
Carbon Steel
Carbon Steel ++
Buna-N
316 Stainless Steel
316 Stainless Steel
600
5056-316
316 Stainless Steel
316 Stainless Steel
Buna-N
316 Stainless Steel
316 Stainless Steel
600
* Trim items include: Shaft Supports, Clamp Plates and Fasteners. Teflon Thrust Washers are Standard Through 12” Size.
++ 316 Stainless Steel Valve Plates Standard on 2” to 6” Sizes.
Spring Data
Materials
Temperature Range**
INCONEL 600
to 750°F
INCONEL X-750
to 1000°F
Seal Data
Materials
Temperature Range**
Buna-N
-60°F
to 225°F
EPDM
-40°F
to 300°F
Viton
-20°F
to 400°F
Teflon
-20°F
to 450°F
Silicone
-90°F
to 500°F
-400°F
to 1000°F
Metal-to-Metal +
** This temperature is for general guidance.
The figures may vary with application and body/internal materials.
+ 316 Stainless Steel Thrust Washers are Standard with Metal-to-Metal Seal Option.
BRP-TEC-GENERAL-01
10/11 SWP-3M
TECHNO™
7
VALVES & MEASUREMENT
TECHNO™ MULTI-PURPOSE CHECK VALVES FOR INDUSTRY
How to Order
Valve Series
Size
1.0 = 1”
DPW
=
1.3 = 1 1/4”
EHF
1.5 = 1 1/2”
2.0 = 2”
=
Body Material
Dual Plate Wafer Check, ASME rated
5050, 5051, 5053, 5056
Elastomer Hinge Flanged 5003, 5004,
5102, 5107
EHW
=
Elastomer Hinge Short Form Wafer
5118, 5296, 5355, 5412
EHL
=
Elastomer Hinge Short Form Lug
(5463) 5463-300
2.5 = 2 1/2”
3.0 = 3”
4.0 = 4”
EHT
=
Elastomer Hinge Threaded Valve
(5002)
EHV
=
Elastomer Hinge Victaulic Grooved
Valve (5103)
EHP
=
Elastomer Hinge Plain End Valve
(5104)
5.0 = 5”
6.0 = 6”
8.0 = 8”
10.0 = 10”
Internal Material
AL
=
Alluminum
AL
=
Alluminum
BR
=
Brass 5002 only
BR
=
Brass 5002 only
CI
=
Cast Iron
BZ
=
Bronze (DPW)
CS
=
Carbon Steel
CS
=
Carbon Steel
WC
=
Cast Steel, A216 Gade WCB
WC
=
Cast Steel, A216 Grade WCB
36
=
316 Stainless Steel
36
=
316 Stainless Steel
XX
=
Other**
12.0 = 12”
Through
72.0 = 72”
XXX = Other**
Size
Valve Series
Body Material
Internal
Materials
SAMPLE:
6
8
TECHNO™
.
0
BRP-TEC-GENERAL-01
10/11 SWP-3M
E
H
T
C
S
A
L
VALVES & MEASUREMENT
TECHNO™ MULTI-PURPOSE CHECK VALVES FOR INDUSTRY
How to Order
Seal Material
Spring Material
Valve Rating
End Connections
Options*
Consult factory for
options such as:
B
=
Buna-N
32
=
302 SS
A12
=
ASME 125
RF
=
Raised Face
U
=
EPDM
36
=
316 SS
A15
=
ASME 150
FF
=
Flat Face
M
=
Metal (Metal Hinge Valves Only)
60
=
Inconel 600
A60
=
ASME 600
MP
=
Male Threaded Ends
S
=
Silicone
75
=
Inconel X-750
030
=
30 psi-cwp
FP
=
Female Threaded Ends
T
=
Teflon (Metal Hinge Valves Only)
NS
=
No Spring
050
=
50 psi-cwp
VC
=
Victaulic Grooved
V
=
Viton A
XX
=
Other**
100
=
100 psi-cwp
PE
=
Plain Ends
XX
=
Other**
125
=
125 psi-cwp
XX
=
Other**
150
=
150 psi-cwp
300
=
300 psi-cwp
450
=
450 psi-cwp
XXX
=
Other**
Epoxy Coat
Drain Holes
Bypass Holes
Special Ports
Special Paint
Fasteners
Etc.
* Techno assigns option suffix numbers to identify special valves.
Once an option number is assigned to specify the special valve, that number can then be used to
reorder an identical valve. Consult factory for options.
** Other: “X” or “XX” or “XXX” indicates a choice other than standards shown.
Note: Certain combinations are not available.
Seal
Material
Spring Material
Valve Rating
Options
End Connections
SAMPLE:
B
3
2
1
5
0
M
P
1
BRP-TEC-GENERAL-01
10/11 SWP-3M
4
5
TECHNO™
9
VALVES & MEASUREMENT
CAMSERV™ AFTERMARKET SERVICES
Cameron’s Aftermarket Services’ goal is to help our
customers lower the total cost of valve ownership. To
that end we offer a full range of services from over
twenty-five Service Centers worldwide and can provide
experienced personnel trained to meet the specific service
requirements of each valve type.
Aftermarket Services
•
Supplies replacement valves and parts:
• Customer Property Repair
–Maintains a full inventory of new and
reconditioned valves for immediate delivery
Cameron valve customers to store assets at our
–Provides factory warranty support for all
Cameron OEM brands as well as service for most
–The Customer Property Repair program allows
service centers throughout the world
other valves
–Valves tracked in electronic database accessible
through the Internet
• Field Service & Technical Support
•
Remanufactured Products
–Offers a broad range of API-compliant
–Field service technicians on call 24 hours a day
7 days a week to handle service issues wherever
they arise
reconditioned equipment with fast delivery
• Total Valve Management
–Provides equipment installation, field repairs, as
well as track and perform scheduled
maintenance
–Supply and service automation and control
packages
–Assist with valve installation, commissioning and
start-up
10 TECHNO™
BRP-TEC-GENERAL-01
10/11 SWP-3M
VALVES & MEASUREMENT
TRADEMARK INFORMATION
TECHNO™ is a registered trademark which is owned by Cameron.
This document contains references to registered trademarks or product designations,
which are not owned by Cameron.
TrademarkOwner
Inconel
INCO Nickel Sales, Inc.
Monel
INCO Alloys International, Inc.
Teflon
E.I. DuPont De Nemours & Company
Viton
E.I. DuPont De Nemours & Company
CERTIFICATIONS
ISO 9001 Certified
BRP-TEC-GENERAL-01
10/11 SWP-3M
TECHNO™ 11
VALVES & MEASUREMENT
Valves & Measurement
3250 Briarpark Drive, Suite 300
Houston, TX 77042
USA Toll 800 323 9160
For the most current contact and location information go to: www.c-a-m.com
Cameron strives for continuous improvement in all aspects of our business. Cameron
reserves the right to modify designs and specifications without notice or obligation. Nothing
contained in this brochure is intended to extend any type of warranty, expressed or implied.
© Cameron Printed in USA 10/11-SWP-3M BRP-TEC-GENERAL-01