WWE Pro Operation and Parts Manual

Transcription

PINBALL
MACHINE
SERVICE AND OPERATION MANUAL
WWE PRO
WWE PRO #500-55G1-00
MANUAL #780-50G1-00
TABLE OF CONTENTS
1.
Setup and Moving ..................................... 3
2.
SPIKE Pinball Platform Overview ............ 7
3.
Light, Switch, and Driver Reference ........ 9
GAME SOFTWARE UPDATE
11
4.
Electronic Pinouts and Schematics....... 19
21
www.sternpinball.com
5.
Parts Reference ....................................... 36
41
42
42
44
44
6.
Warranty ................................................... 58
.......................................... 59
#780-50G1-00
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
SETUP AND MOVING
1. SETUP AND MOVING
CAUTION
1.1 FIRST-TIME SETUP
AT LEAST TWO (2) PEOPLE ARE REQUIRED TO MOVE AND MANEUVER
THE GAME. USE PROPER MOVING
EQUIPMENT AND EXTREME CARE
WHILE HANDLING. STERN PINBALL
MACHINES WEIGH OVER 250LBS
BOXED.
TOOLS REQUIRED
2
2
5
7
5
7
1
6
8
8
15
14
9
11
11
#780-50G1-00
14
SETUP AND MOVING
FIRST-TIME SETUP CONTINUED
21
17
19
25
27
26
CAUTION
PLAYFIELD GLASS IS MADE FROM HIGH-STRENGTH TEMPERED GLASS. TEMPERED
GLASS IS SENSITIVE TO EXTREME TEMPERATURE SHIFTS AND CORNER NICKS,
WHICH CAN CAUSE THE GLASS TO FAIL CATASTROPHICALLY. TAKE CARE TO STORE
THE GLASS ON ON A SOFT, ROOM-TEMPERATURE SURFACE AND PREVENT THE CORNERS FROM BEING DAMAGED.
#780-50G1-00
SETUP AND MOVING
FIRST-TIME SETUP CONTINUED
LOCATING, LEVELING, AND FINAL SETUP
#780-50G1-00
SETUP AND MOVING
1.2 TRANSPORTING THE GAME
CAUTION
1. SECURE THE BACKBOX
TOOLS REQUIRED
NEVER TRANSPORT THE GAME IN A
MOVING VEHICLE WITH THE BACKBOX
RAISED! TWO PEOPLE ARE REQUIRED
TO REMOVE THE LEGS!
• STRAP (500LB OR GREATER)
• A HELPER
• HAND TRUCK
2. REMOVE THE LEGS AND
STAND UP
3
2
6
4
8
9
#780-50G1-00
SPIKE PINBALL PLATFORM OVERVIEW
2. SPIKE PINBALL PLATFORM OVERVIEW
1.3 SPIKE SYSTEM AND NODE
GUIDE
Node
Description
Address
Location
1.5 NODE BUS CABLING
Part Number
1
1.6 SYSTEM POWER
11
WWE SPIKE NODE TABLE
1.4 SPIKE SYSTEM OVERVIEW
COIN-DOOR SAFETY INTERLOCK
1.7 SPIKE NODE ADDRESSES
Address
#780-50G1-00
1
2
3
SPIKE PINBALL PLATFORM OVERVIEW
FLASHERS
11
12
14
Figure 1.7.1. SPIKE node addresses for nodes with 3-position DIP
switches. Addresses 0-7 are not used by SPIKE nodes with 3-position DIP switches.
Address
2
1
2
3
DRIVERS
4
4
11
12
OPTOS
1.10 SYSTEM PROTECTIONS
14
Figure 1.7.2. SPIKE node addresses for nodes with 4-position DIP
switches. Addresses 0 and 1 are reserved for the CPU and Cabinet
nodes, respectively.
INPUT/OUTPUT PROTECTIONS
1.8 SPIKE NODE PROGRAMMING
1.9 SPIKE SYSTEM TERMINOLOGY
FUSES
MULTI GENERAL ILLUMINATION LIGHTING
Fuse Rating (Amps)
Type
Part Number
SINGLE LIGHTS
#780-50G1-00
LIGHT, SWITCH, AND DRIVER REFERENCE
3. LIGHT, SWITCH, AND DRIVER REFERENCE
CN14
BACKBOX
TROUGH SERIAL
OPTO RECEIVER
NODE 9A
CN1
520-5345-00
CN3
NODE 8
DIP
SW1 OFF OFF OFF OFF
1
2
4
LOWER
PLAYFIELD
SERIAL LED
NODE 8A
CN3 CN22
CPU NODE 0
520-6950-00
CN2
NODE 11
DIP
ON ON
SW1 OFF
1
CN10
CABINET
CN2 CN3
2
CN14
CN9
CN13
NODE 9
DIP
ON
SW1 OFF OFF
1
2
CABINET NODE 1
NODE 10
DIP
ON
SW1 OFF
OFF
1
2
CN2
CN3
Node Bus Cable (RJ45)
Serial Data Cable
#780-50G1-00
3.1 DRIVER REFERENCE
PLAYFIELD TOP
PLAYFIELD BOTTOM
7
14
1
2
20,
15
21,
16
13
12
18
17
9
10
11
3
3
11
9
17
10
18
13
12
20,
15
21,
16
2
14
1
7
Figure 3.1.2.
Figure 3.1.1.
#780-50G1-00
DRIVER REFERENCE TABLE
ID Name
Node Connector
Ret.
Pin
Ret. Wire
1
2
Voltage
V+ Pin V+ Color
Location
Type
Address
Part Number
4
4
4
1
4
4
4
11
12
4
4
4
4
4
14
4
4
1
1
1
21
1
1
1
2
2
Figure 3.2.1. Driver reference table.
3.2 LIGHTING REFERENCE
ID
Name
1
2
Node Node Conn.
Ext.
1
1
4
Ret. Ret. Wire
Pin
4
Src.
Pin
1
1
Src.
Wire
Location
Type
Light
Color
Address Part Number
2
1
D4
11
12
D12
14
D11
2X
D14
4X
21
22
#780-50G1-00
11
LIGHTING REFERENCE
77
78
79
71
70
72
80
73
81
3
74
69
75
68
65
76
4
64
84
83
94
66
48-50
83
84
67
93
56
42-44
23
57-59
45
17
19
24
13
89
61
35
36
34
12
86
20
25
16
15
28
90
91
84
38
39
29-31
34
32
33
38
89
27
23
13
24
14
19
85
17
85
21
87
83
92
12
11
10
9
15
28
16
20
7
57-59
47
56
93
52-54
66
94
86
67
88
62
63
83
84
64
68
76
69
75
70
3
77
12
96
84
22
4
Figure 3.2.3.
95
55
48-50
86
84
60
51
6
5
61
42-44
83
39
40
45
83
86
18
8
85
26
25
41
37
46
84
91
90
36
35
84
83
84
32
29-31
83
26
92
33
83
41
10
86
18
83
84
40
37
9
11
14
27
60
46
86
8
85
95
22
7
85
85
55
47
83
21
62
96
88
6
52-54
51
83
63
5
87
78
71
72
79
73
74
80
81
Figure 3.2.2.
#780-50G1-00
65
LIGHTING REFERENCE
84
84
84
84
84
84
84
99
100
97
1
82
2
98
Figure 3.2.5.
LEGEND
Figure 3.2.4. Cabinet lighting locations.
LIGHTING REFERENCE CONTINUED
ID
Name
Node Node Conn.
Ext.
24
Ret. Ret. Wire
Pin
1
1
Src.
Pin
Src.
Wire
Location
4
4
11
11
11
11
11
11
2
2
2
11
2
4
11
11
11
11
41
11
11
42
11
11
11
11
11
4
44
11
2
1
1
1
2
2
1
1
1
1
1
1
#780-50G1-00
Type
Light
Color
Address Part Number
LIGHTING REFERENCE CONTINUED
ID
Name
Node Node Conn.
Ext.
Ret. Ret. Wire
Pin
12
14
11
11
11
11
11
11
11
11
11
4
4
11
12
2
4
11
11
11
11
11
1
11
2
Src.
Pin
1
1
1
1
2
2
Src.
Wire
Location
Type
Light
Color
Address Part Number
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
D21
11
11
11
14
4
1
2
14
1
1
1
1
#780-50G1-00
3.3 SWITCH REFERENCE
ID
1
2
4
Name
Node Node Conn. Input Input
Ext
Pin
Wire
11
2
11
12
11
11
4
4
4
GND Ground
Pin
Wire
Location
14
14
11
12
14
2
14
2
2
1
1
11
14
1
21
22
4
24
2
2
2
2
14
1
1
1
1
2
2
2
1
1
1
11
11
14
11
11
11
4
4
14
14
41
42
44
11
11
11
11
11
2
4
#780-50G1-00
Type
Address
Part Number
SWITCH REFERENCE
48
49
41
42
43
44
27
53
60
54
24
14
47
25
34
26
28
3
30
38
23
59
55
57
1622
61
58
56
46
45
31
63
65
66
5
6
1
2
5
39
4
6
64
32
9
8
12
36
29
7
33
37
35
35
12
37
33
7
36
29
8
9
32
63
5
3
1
2
5
31
30
38
6
64
4
39
28
6
26
25
47
14
57
54
60
55
23
59
56
Figure 3.3.2.
41
48
42
43
53
58
27
1622
34
24
44
61
45
49
46
Figure 3.3.3.
service position.
#780-50G1-00
SWITCH REFERENCE CONTINUED
ID
Name
Ext
Pin
Wire
11
11
11
12
11
2
4
12
GND Ground
Pin
Wire
Location
Type
Address
Part Number
14
14
14
14
14
14
14
14
14
14
14
1
14
14
2
2
1
1
1
1
1
1
1
1
14
14
1
1
4
10
62
15
11
72
C9C12
73
68
67
Figure 3.3.4. Cabinet switch locations.
Figure 3.3.5. Coin door switch locations. Refer to Coin Door Reference for other parts.
#780-50G1-00
SWITCH REFERENCE TABLE CONTINUED
ID
Name
Ext
Pin
Wire
GND Ground
Pin
Wire
Location
Type
Address
Part Number
C1
C2
C4
4
C11
C12
2
1
4
Figure 3.3.1. Switch reference table. See individual node pages in Section 3 for detailed pinouts and technical data.
#780-50G1-00
ELECTRONIC PINOUTS AND SCHEMATICS
4. ELECTRONIC PINOUTS AND SCHEMATICS
4.1 SPIKE CPU NODE 0
520-6936-00
CONNECTORS
ID
Connector Type
Description
Figure 3.3.6. SPIKE CPU Node connector detail.
COMPONENTS
ID
COUNTRY CODES (DIP S2)
Name
1
2
4
AUDIO PINOUTS
ID
Type
Pin
Description
Minimum Max
ImpedPower
ance
(RMS)
1
2
4
1
2
1
2
Figure 3.3.8. Audio Pinouts
Figure 3.3.7. Country code DIP switch settings.
#780-50G1-00
SPIKE CPU NODE 0 CONTINUED
STATUS LEDS
LED Name
ID
Color Description
DIRECT SWITCH MAPPING (CN25)
ID
Name
Conn.
Input
Pin
Input Wire
GND
Pin
Ground
Wire
Location
Type
Address
Part Number
C1
C2
C4
4
C11
C12
2
1
4
COIN DOOR SERVICE SWITCH WIRING
Figure 4.1.1.
Switches to function correctly.
#780-50G1-00
4.2 CABINET NODE 1
520-5319-00
SWITCH MAPPING
ID
Name
Conn. Input Input Wire
Pin
GND
Pin
Ground Wire Location
Type
Address
Part Number
4
LIGHTING MAPPING
ID
Description
Conn.
Ret.
Pin
1
2
Ret. Wire
4
2
Src. Src. Wire
Pin
1
1
1
Location
Type
Light
Color
Address
Part Number
DRIVER MAPPING
ID
Name
Connector
Return
Pin
Return
Wire
Voltage
2
2
Power
Pin
Power Location
Color
Type
Address
Part Number
1
1
1
FUSE
ID
Description
Min Voltage
Current
Fuse P/N
NODE BUS AND SERIAL CONNECTIONS
Connector
Destination
Figure 4.1.2.
#780-50G1-00
21
CABINET NODE 1 CONTINUED
CABINET NODE PINOUT
1
2
1
2
4
4
1
2
1
2
1
2
4
1
2
1
2
4
4
1
2
4
1
2
4
1
2
4
11
12
14
1
2
4
11
12
Figure 4.2.1.
22
#780-50G1-00
4.3 LOWER PLAYFIELD 48V 8-DRIVER NODE 8
520-6935-00
1
3
2
4
5
21,
16
20,
15
87
6
6
21
3
1
2
5
86
8
86
85
17
85
22
4
6
7
85
17
9
88
18
18
86
5
10
19
23
24
20
11
13
14
27
25
16
15
12
28
89
92
90
91
Figure 4.2.2.
10 11
Figure 4.2.3.
26
#780-50G1-00
LOWER PLAYFIELD 48V 8-DRIVER NODE 8
NODE ADDRESS SETTING
DIP SW1
1
2
3
4
SWITCHES CONNECTED TO NODE 8
ID
Name
Node Node ConExt
nector
In- Input Wire
put
Pin
4
4
2
2
4
2
2
11
Ground Ground
Pin
Wire
Location Type
Address
Part Number
1
1
1
1
LIGHTING CONNECTED TO NODE 8
ID
4
Description
Node Node
Ext.
Conn.
Return
Pin
Return
Wire
Supply
Pin
Supply
Wire
Location Type
Light
Color
Address
Part Number
2
1
D4
11
12
D12
14
D11
D14
21
22
24
24
1
1
4
4
1
2
1
2
#780-50G1-00
D21
DRIVERS CONNECTED TO NODE 8
ID
Description
Node Connector Return
Pin
1
2
Return
Wire
48V
Power
Pin
4
48V Power
Color
Location Type
Address Part Number
4
4
21
FUSES
4.4 LOWER PLAYFIELD SERIAL LED (NODE 8A)
520-6950-00
PINOUT
ID
Type
Pin Description
1
2
4
1
2
4
1
2
4
1
2
4
Figure 4.4.1.
#780-50G1-00
Wire Color
4.5 MID PLAYFIELD 4-DRIVER 48V NODE 9
48
49
1622
24
14
83
48-50
83
83
38
52-54
93
9
51
56
32
63
39
55
31
30
47
10
64
11
83
9
35
83
3
8
7
36
83
37
36
35
83
7
8
9
83
37
3
83
11
63
83
51
38
83
30
56
31
9
93
48-50
64
32
47
55
39
10
52-54
83
14
1622
48
24
49
Figure 4.5.1.
#780-50G1-00
MID PLAYFIELD 4-DRIVER 48V NODE (N9, N9A) CONTINUED
520-5329-00
DIP SW1
1
2
3
Figure 4.5.2.
SWITCH MAPPING
ID
Name
Node Node ConExt
nector
Input Input
Pin
Wire
4
2
14
Ground Ground
Pin
Wire
14
14
14
14
Location Type
Address
Part Number
21
22
24
2
2
2
11
12
14
1
1
1
14
14
14
14
14
14
LIGHTING MAPPING
ID
Description
Node
Node Conn.
Ext.
Return Return
Pin
Wire
2
4
Supply
Pin
1
1
1
1
1
Supply Location Type
Wire
#780-50G1-00
Light
Color
Address Part Number
11
1
1
1
1
12
1
1
14
1
1
1
1
DRIVER MAPPING
Con
nec
4
4
4
4
11
FUSE
ID
Description
Min Voltage
Current Fuse P/N
Connector
Destination
4.6 TROUGH SERIAL OPTO RECEIVER
520-5345-00
ID
Type
Pin Description
1
2
Wire Color
4
4.7 TROUGH SERIAL OPTO TRANSMITTER
520-5344-00
ID
Type
#780-50G1-00
Pin Description
1
2
Wire Color
4.8 UPPER MINI PLAYFIELD 4-DRIVER 48V NODE 10
520-5329-00
84
99
84
84
84
84
84
84
100
7
27
56
55
57
54
71
72
61
58
73
59
74
69
68
47
70
14
25
76
24
14
12
66
26
28
97
60
75
34
98
Figure 4.8.1.
84
13
84
67
52-54
83
84
83
84
84
39
28
66
67
25
47
26
84
13
12
84
57
54
68
55
14
69
56
76
75 60
70
72
74 59
71
73
58
27
61
14
Figure 4.8.2.
#780-50G1-00
34
24
7
UPPER MINI PLAYFIELD 4-DRIVER 48V NODE 10 CONTINUED
DIP SW1
1
2
Type
Address
3
Figure 4.8.3.
ID
Name
Con- Input Input Wire
nector Pin
2
2
2
2
Ground Ground
Pin
Wire
1
1
1
1
14
14
14
14
14
14
14
14
14
14
14
14
11
2
4
12
Location
Part Number
ID
Description
Return Return
Pin Wire
11
12
2
4
Supply
Supply
Pin Wire
1
1
1
1
1
1
1
1
1
1
1
Light Color Address
Location
Part Number
Type
1
14
1
1
1
1
#780-50G1-00
UPPER MINI PLAYFIELD 4-DRIVER 48V NODE 10 CONTINUED
DRIVERS CONNECTED TO NODE 10
ID
Description
Connec- Return Return
tor
Pin
Wire
12
14
48V
48V Pow- Location
Power er Color
Pin
4
4
4
4
FUSES
Type
Address Part Number
ID Description
Min Volt- Cur- Fuse P/N
age
rent
200-5000-03
Connector
Destination
4.9 UPPER PLAYFIELD LIGHTING AND SWITCH NODE 11
520-5322-00
1
2
2
12
4
12
4
4
2
41
42
4
44
ID
Description
Conn. Return Return
Pin
Wire
Supply Supply Location
Pin
Wire
2
2
2
11
2
11
#780-50G1-00
Address
Part Number
DIP SW1
1
2
3
Connector
Destination
Figure 4.10.2.
ID
Description
41
42
Conn. Return Return
Pin
Wire
11
4
Address
Supply Supply Location
Pin
Wire
Part Number
44
4
4
11
4
2
2
2
2
2
2
2
2
2
2
2
2
4.10 UPPER MINI PLAYFIELD LED BOARD
PINOUT
520-6951-00
1
2
4
Figure 4.10.1.
#780-50G1-00
UPPER PLAYFIELD LIGHTING AND SWITCH NODE 11 CONTINUED
77
78
79
80
81
41
42
43
44
45
53
65
64
63
94
62
96
48-50
51
47
3
52-54
55
60
61
38
33
29
40
37 34
39
35
29-31
35
12
41
37 34
32
40
46
61
60
42-44
57-59
47
56
51
1
2
4
39
33
29
36
38
45
3
36
32
33
41
29-31
33
4
57-59
45
12
2
95
56
42-44
46
1
95
55
52-54
48-50
96
94
62
63
64
65
53
Figure 4.10.3.
#780-50G1-00
41
42
43
44
45
77
78
79
80
81
4.13 BACKBOX INTERCONNECT
BLOCK DIAGRAM
4.11 OPTO AMPLIFIER WIRING
520-5239-01
Figure 4.13.4.
POP BUMPER OPTO AMPLIFIER PINOUTS
ID
Type
Pin Description
1
2
1
2
1
2
1
2
1
2
Wire Color
Figure 4.13.3.
4.12 MAIN POWER SUPPLY
011-5001-00
4
Figure 4.13.2.
UPPER PLAYFIELD OPTO AMPLIFIER PINOUTS
ID Type
Pin Description
1
2
1
2
1
2
1
2
1
2
Wire Color
PINOUT
ID
Type
Pin Description
1
2
4
4
Figure 4.13.1.
#780-50G1-00
Wire
Color
4.14 POWER DISTRIBUTION BOARD
520-5343-00
4.15 POWER PLUG WIRING
CAUTION
TO MAINTAIN SAFETY, GROUND WIRE FROM LINE FILTER IS
TO BE MOUNTED FIRST ON GROUNDING STUD AND SECURED
WITH NUT. ALL OTHER GROUNDS MAY THEN BE ATTACHED
TO GROUNDING STUD.
REPLACE ALL FUSES WITH CORRECT CURRENT RATINGS!
NORTH AMERICA
PINOUT
ID
Type
Pin Description
Wire
Color
1
2
4
INTERNATIONAL
1
2
1
2
4
1
2
4
LINE CORDS
Part Number
Description
1
2
4
11
12
LINE FUSES
Line Voltage (Region)
Figure 4.14.1. Power Distribution Board 520-5343-00 pinout
Figure 4.15.1.
#780-50G1-00
Fuse
Type
Current
Part Number
PARTS REFERENCE
5. PARTS REFERENCE
5.1 PLAYFIELD TOP PARTS
ID
1
2
10
Part Number
Description
4
10
22
15
11
12
23
20
12
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
21
14
20
9
8
14
13
8
25
7
8
21
22
2
19
18
17
3
24
27
5
24
6
28
4
1
#780-50G1-00
Qty
1
1
1
1
1
4
1
PARTS REFERENCE
5.2 PLAYFIELD BOTTOM PARTS
ID
1
2
11
Part Number
11
4
2
17
DescriptiOFF
Qty
1
1
1
1
2
1
1
3
4
11
12
14
2
2
2
2
2
2
5
5
2
1
1
1
1
19
21
18
21
6
7
16
8
8
8
7
7
9
9
20
10
10
16
#780-50G1-00
1
PARTS REFERENCE
5.3 PLAYFIELD RUBBER PARTS
RUBBER O-RINGS
ID
10
1
10
10
10
10
1
1
1
1
Qty Size
(ID)
Size
(OD)
Durometer Color
Part Number
1
10
1
2
1
1
9
9
3
3
3
3
9
9
4
1
5
1
2
10
1
2
4
10
2
1
6
6
2
1
1
10
1
2
14
4
2
2
2
10
10
10
10
8
8
Figure 5.3.1.
6
6
12
12
11
ID
11
Qty
12
2
4
14
1
Description
Color
Part Number
Figure 5.3.3.
Figure 5.3.2. Rubber o-ring part locations
#780-50G1-00
PARTS REFERENCE
5.6 LIGHTING COMPONENTS
5.4 RUBBER SIZE CHART
2
2
21
2
2
2
5.7 SCREWS AND FIN SHANKS
Part Number
Description
Qty
11
4
4
2
4
12
12
4
4
4
21
Figure 5.3.4.
5.5 PLAYFIELD NUTS
4
2
44
2
4
2
2
2
4
4
4
4
2
4
4
2
2
#780-50G1-00
PARTS REFERENCE
5.8 PLAYFIELD SPACERS
2
1
1
4
2
2
2
4
4
12
2
12
5.9 PLAYFIELD POSTS
1
2
4
2
#780-50G1-00
PARTS REFERENCE
5.10 BACKBOX PARTS
500-9902-G1
9
4
3
1
3
2
1
7
8
3
5
5
6
2
Figure 5.10.1.
Part Number Description
4
4
Figure 5.10.3.
EXTERNAL
ID
1
2
6
INTERNAL
Qty
1
1
2
1
1
1
ID
1
2
Part Number
4
Figure 5.10.2.
802-5001-G1
Description
Qty
1
1
1
1
1
1
1
1
1
1
Figure 5.10.4.
* Line Cord connects to rear and varies by country. Refer to power
supply reference for international line cord options.
#780-50G1-00
41
PARTS REFERENCE
5.11 SPEAKER PANEL PARTS
5.12 CABINET DECALS
500-9854-G1
2
1
1
2
4
6
4
6
Figure 5.11.1.
7
4
5
4
3
4
Figure 5.11.2.
5
1
2
4
Figure 5.11.3.
1
1
2
2
1
1
1
Figure 5.12.1. Cabinet decal locations
1
2
1
1
1
1
1
1
4
Figure 5.12.2.
separately.
42
#780-50G1-00
PARTS REFERENCE
5.13 CABINET PARTS
ID
1
2
Part Number
Description
4
Qty
1
1
1
1
1
1
1
2
2
2
2
1
2
1
1
2
1
11
12
14
ID
21
22
Part Number
24
1
1
2
#780-50G1-00
Description
Qty
1
1
1
1
1
1
1
4
1
1
1
1
PARTS REFERENCE
5.14 AUTO LAUNCH ASSEMBLY
5.15 BALL TROUGH ASSEMBLY
500-9818-00
500-9820-00
ID Part Number
1
2
4
11
12
14
Figure 5.14.1.
44
Description
Qty
1
1
1
1
1
1
1
1
4
1
1
2
1
1
1
1
1
1
ID Part Number
1
2
Description
4
11
12
Qty
1
1
2
1
1
1
4
1
1
4
1
1
1
1
Figure 5.15.1.
#780-50G1-00
PARTS REFERENCE
5.16 3-BANK DROP TARGET ASSEMBLY
500-7216-03-G1
ID
1
2
Part Number
Description
Qty
1
4
4
1
1
11
12
14
21
22
Figure 5.16.1.
#780-50G1-00
1
2
4
1
1
1
1
1
1
1
1
2
PARTS REFERENCE
5.17 POP BUMPER ASSEMBLY
516-6784-XX
1
13
2
13
19
15
3
21
16
4
17
9
10
8
7
1
1
Figure 5.17.2.
blies.
5
6
-
19
1
1
1
2
11
12
1
14
1
2
4
Figure 5.17.1.
1
1
1
1
1
1
1
1
1
1
1
1
1
21
Figure 5.17.3.
als
#780-50G1-00
PARTS REFERENCE
5.18 FLIPPER ASSEMBLY, LEFT
5.19 FLIPPER ASSEMBLY, RIGHT
500-6543-02-ND
500-6543-12-ND
2
1
1
2
4
3
3
4
5
5
6
6
8
8
7
7
9
9
13
13
13
13
11
10
14
14
10
11
Figure 5.18.1.
ID Part Number
1
Description
2
4
11
12
14
Figure 5.18.2.
als.
Qty
1
ID Part Number
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
11
12
14
-
Description
Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
rials.
#780-50G1-00
PARTS REFERENCE
5.20 LEFT WWE RAMP ASSEMBLY
5.22 RIGHT WWE RAMP ASSEMBLY
500-9886-00
500-9887-00
ID Part Number
1
2
Description
4
Qty
1
2
1
4
1
ID
1
2
3
4
5
6
7
Part Number
510-7495-00
500-6775-01
830-6947-11
232-5200-00
242-5001-00
830-7024-00
237-5882-00
Description
Qty
1
2
1
2
2
1
4
1
Figure 5.20.1.
Figure 5.20.2.
5.21 LEFT RING EXIT WIRE RAMP PRO ASSEMBLY
511-7608-08
ID
1
2
4
Figure 5.21.1.
Qty
1
2
4
2
-
#780-50G1-00
PARTS REFERENCE
5.23 BACK PANEL ASSEMBLY, WWE PRO
500-9885-00
Item Part Number
1
2
Description
4
Qty
1
Item Part Number
11
12
Description
Qty
4
1
2
1
2
4
14
1
1
1
4
2
4
Figure 5.23.1.
#780-50G1-00
PARTS REFERENCE
5.24 WWE TOP LANES ASSEMBLY
500-9921-00
ID
1
2
Part Number
Description
Qty
1
4
4
1
4
Figure 5.24.1.
5.25 WWE LEFT “SLAMMER” FLIPPER PLASTIC ASSEMBLY
511-7622-00
ID Part Number Description
1
2
Qty
1
1
1
1
1
4
Figure 5.25.1.
5.26 WWE RIGHT “SLAMMER” FLIPPER PLASTIC ASSEMBLY
511-7622-01
ID
1
2
4
Figure 5.26.1.
#780-50G1-00
Qty
1
1
1
1
1
PARTS REFERENCE
5.27 WWE TOP LANES LIGHTS AND SWITCHES
511-7606-00
Item Part Number
1
Description
Qty
1
2
4
Figure 5.27.1.
5.28 WWE BOTTOM ORBIT ASSY
500-9918-00
ID Part Number
1
2
4
Figure 5.28.1.
#780-50G1-00
Description
Qty
1
2
4
2
PARTS REFERENCE
5.29 WWE TOP LANES POSTS ASSY
511-7620-00
5.30 WWE POP BUMPER FLASHER
ASSEMBLY
511-7627-00
ID
1
2
Part Number
Description
Qty
1
4
ID
1
2
Part Number
Description
Qty
1
1
4
2
1
1
1
12
Figure 5.30.1.
#780-50G1-00
PARTS REFERENCE
5.31 WWE MINI PLAYFIELD ASSEMBLY
500-9919-00
Figure 5.31.1.
Item Part Number Description
1
2
Figure 5.31.2.
Qty
1
Item Part Number Description
14
4
1
1
2
21
22
2
1
11
12
4
4
24
1
4
4
12
4
Figure 5.31.3.
Qty
1
4
1
1
2
2
2
4
Note: Some items illustrated on Top Drawing
#780-50G1-00
PARTS REFERENCE
5.32 WWE LADDER LIGHT AND
SWITCH ASSEMBLY
5.34 WWE LADDER EXIT SWITCH
ASSEMBLY
511-7624-00
511-7609-00
ID Part Number
1
2
Description
4
Qty
1
1
2
1
4
4
1
2
4
Figure 5.34.1.
Figure 5.32.1.
5.33 VERTICAL UPKICKER ASSY ANGLED TIP
500-6868-00
ID
1
2
4
11
Qty
1
1
1
1
1
1
1
1
2
2
1
Figure 5.33.1.
#780-50G1-00
Qty
1
1
2
1
PARTS REFERENCE
5.35 WWE POP BUMPER PLAYFIELD
ASSEMBLY
5.36 WWE BALL GUIDE 04 ASSEMBLY
511-7572-04
511-7603-00
1
2
4
Figure 5.36.1.
rials.
Qty
1
1
1
2
-
5.37 WWE BALL GUIDE 02 ASSEMBLY
511-7572-00
ID
1
2
4
11
12
14
Qty
1
4
4
4
2
2
2
4
2
1
1
1
1
1
ID
1
2
4
Figure 5.35.1.
Figure 5.37.1.
#780-50G1-00
Qty
1
1
2
1
PARTS REFERENCE
5.38 WWE LADDER ASSEMBLY
5.40 WWE STAND UP TARGET
3-BANK ASSEMBLY
500-9929-00
500-9923-00
ID Part Number
1
2
Description
4
ID Part Number
1
2
Qty
1
1
4
4
1
1
Description
Qty
1
1
4
2
1
11
12
1
1
1
Figure 5.38.1.
5.39 SHOOTER LANE GATE ASSEMBLY
Figure 5.40.1.
5.41 RING EXIT SWITCH ASSEMBLY
511-7617-00
511-7636-00
ID Part Number
1
2
Description
Qty
1
1
1
2
Qty
1
1
2
1
4
Figure 5.41.1.
#780-50G1-00
PARTS REFERENCE
5.42 SLING SHOT ASSEMBLIES
5.43 ELECTRIC GATE, RAIL MOUNT
500-9924-XX, 500-9920-01
511-7637-XX
Figure 5.42.5.
500-9920-01
500-9924-00
500-9924-01
Figure 5.42.4. Lower left and right sling
Figure 5.42.2. Right
Figure 5.42.3. Left
sling shot
shot
1
2
4
Qty
1
1
1
1
2
1
2
2
1
2
1
1
11
12
Figure 5.42.1.
ID Part Number
1
2
4
Figure 5.43.1.
#780-50G1-00
Description
Qty
1
1
1
1
1
1
1
1
WARRANTY
6. WARRANTY
STERN PINBALL INC LIMITED WARRANTY
FCC CLASS A SUBPART J COMPLIANCE
warranty period
RF INTERFERENCE NOTICE
COPYRIGHT AND INTELLECTUAL PROPERTY NOTICE
WARRANTY DISCLAIMER
6.1 WARNINGS, COMPLIANCE, AND
LEGAL NOTICES
PHOTOSENSITIVE SEIZURES HEALTH WARNING
PARTS SUBSTITUTIONS
#780-50G1-00
SPECIFICATIONS
7. SPECIFICATIONS
SPECIFICATIONS, MECHANICAL, GAME SETUP
Imperial
SPECIFICATIONS, ENVIRONMENT
Metric
cm
SPECIFICATIONS, MECHANICAL, BOXED
Imperial
SPECIFICATIONS, ELECTRICAL
Metric
7.1 GAME DIMENSIONS
#780-50G1-00
1-800-KICKERS
[email protected]
WWW.STERNPINBALL.COM
FACEBOOK.COM/STERNPINBALL
WWE PRO MODEL #500-55G1-00

WWE Pro Operation and Parts Manual

Transcription

Similar documents

KISS Pro Manual Kiss Pro Manual

WWE Pro Operation and Parts Manual