FAQ Hyper English - Painful Pleasures

the future is now.. enjoy tattooing
Stigma-Rotary® Hyper Tattoo Machine
FAQ (for answers and questions)
How do I adjust softness (“give”)?
The Hyper V2 has a patented, unique and very effective infinity adjustable damping system developed by tattoo
artist Artemis Rosakis. The Hyper V2 is equipped with an adjustable screw to control softness (“give”). The more you
tighten the control screw, the stiffer the a-bar becomes and the machine hits harder. When you unscrew the control
screw, the a-bar becomes looser (the looser, the softer), and the machine hits softer (give effect). This adjustment
allows you to fineadjust the machine on the fly to suit your needs in just seconds.
How do I adjust the stroke-length (hub)?
On the Hyper V2, the stroke-length (hub) changes automatically in combination with the softness (“give”) adjustment feature and the speed.When adjusted for lining you get shorter but harder strokes (minimum 3,5 mm). When
adjusted for shading you get longer but softer strokes (maximum 5 mm).When you increase the speed (by the volts)
you get longer strokes.When you decrease the speed (by the volts) you get shorter strokes.
What is the position of the a–bar and the needles when the motor stops?
The mechanism of the Hyper V2 has a spring that pushes up the armature bar with the needles when the motor
stops. This means that when the machine stops, the needles are inside the tube.
How often does the Hyper V2 require service?
If the right lubricant is used (use synthetic grease ONLY!!), the Hyper V2 will run smoothly for years. We are available
for assistance and guidance well after your purchase and can offer you any parts that you may need as well as our
services in our repair and assembling shop at reasonable prices.
What type of power supply will I need?
All Stigma-Rotary® machines work with almost any power supply. The Eikon EMS 250 does not work with rotaries. If
you want to use the Eikon EMS 300 then check the menu for a rotary mode and turn it on. If your Eikon EMS 300 does
not have a rotary mode on the menu then it will run only for a few seconds. In this case, Eikon is willing to upgrade
the software of your EMS 300 for free, you just pay for the shipping cost. All new Eikons EMS 300 work with rotaries
and all other future Eikon models will be rotary compatible.
http://www.stigma-rotary.com
Stigma Rotary® · Greybusters International GmbH · Lausitzerstrasse 31 · 10999 Berlin - Germany · stigma-rotary@tattoosafe de · http://www.stigma-rotary.com