PARTS BOOK - Hutchinson Mayrath

Transcription

13” SWING-AWAY
62’, 72’ & 82’ PORTABLE AUGERS
INTERNAL GEAR DRIVE
PARTS BOOK
Effective January, 2013
Publication No. PB1039338
THIS PARTS BOOK IS FOR ALL 13” SWING - AWAY 62’, 72’ & 82’ PORTABLE
AUGERS INTERNAL GEAR DRIVE. STARTING AT DATE JULY 19, 2002 AND
SN 904714 TO PRESENT.
INFORMATION IN THE BOOK HAS BEEN GATHERED FROM THE FOLLOWING
PUBLICATIONS. PUBLICATION NO. 1021365, PUBLICATION NO. 1034411 AND
PUBLICATION NO. 1039338.
Galvanized Models
62’ - 1362816L
62’ - H1362816L
72’ - 1372816L
72’ - H1372816L
82’ - 1382816L
82’ - H1382816L
Painted Models
62’ - 1362806L
62’ - H1362806L
72’ - 1372806L
72’ - H1372806L
82’ - 1382806L
82’ - H1382806L
Hutchinson/Mayrath
A Division of GLOBAL Industries Inc.
Hutchinson/Mayrath · P.O. Box 629 · Clay Center, KS. 67432
Ph. 785–632–2161 · Fx. 785–632–5964 · Toll Free 800–523–6993
Hutchinson/Mayrath
A Division of GLOBAL Industries, Inc.
POLICIES AND PROCEDURES
Prices: Prices in effect at time of shipment will apply. Prices are subject to change without notice. All prices are
F.O.B. Clay Center, Kansas. Orders shipped from locations other than Clay Center, Kansas will be
subject to additional charges, such as back freight and/or additional freight.
Service Charge: A service charge will be assessed for all past due balances as permitted by state law not to exceed
1-1/2% per month.
Minimum Order: Processing and handling costs necessitate a minimum charge of $15.00 net on all orders.
Back Orders: Back orders will be shipped as they become available. Contact Hutchinson/Mayrath Customer Service for
alternative shipping options or if cancellation is desired.
Damaged Goods: It is the consignee’s responsibility to check all shipments thoroughly upon receipt of goods. If any damage
is discovered, it must be noted on the freight bill of lading before signing. The consignee must make
necessary claims against the respective freight line. All damage claims must be submitted within 30 days of
delivery receipt.
Shortages: All shortages must be noted at time of delivery. Shortages must be noted on the freight bill of lading before
signing. Hutchinson/Mayrath must be advised of all concealed shortages upon discovery. Once notified of
concealed shortages Hutchinson/Mayrath will advise corrective action to be taken.
Return of Goods: All returns must be approved by Hutchinson/Mayrath prior to shipment. All return requests will be issued a
return authorization number. NO RETURNS WILL BE ACCEPTED WITHOUT A RETURN AUTHORIZATION
NUMBER AND PRIOR AUTHORIZATION FROM THE FACTORY. All returns must be shipped prepaid. A
15% restocking charge will be applied to all returned merchandise. Custom Products may not be returned
for credit. Only current products in new and salable condition may be returned. No safety devices may be
returned for credit.
Modifications: It is the policy of Hutchinson/Mayrath to improve its product whenever possible and practical to do so. We
reserve the right to make changes, improvements and modifications at any time without incurring the obligation
to make such changes, improvements and modifications on any equipment sold previously.
Limited (a) For a period of (1) year after receipt of goods by the original consumer buyer, Hutchinson/Mayrath will
Warranty: supply free of charge replacement parts for parts that prove defective in workmanship or material. Defective
parts must be returned freight prepaid to a specified Hutchinson/Mayrath location. Only Hutchinson/Mayrath
original repair parts may be used for warranty repairs.
(b) This limited warranty does not extend to parts designed to wear in normal operation and be replaced
periodically; or to damage caused by negligence, accident, abuse or improper installation or operation.
(c) GOODS NOT MANUFACTURED BY HUTCHINSON/MAYRATH CARRY ONLY THE MANUFACTURER’S
WARRANTY.
(d) THIS UNDERTAKING IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
FAILURE TO FOLLOW THE INSTRUCTIONS CONTAINED IN THE OWNER’S & OPERATOR’S MANUALS
AND THE ITEMS LISTED BELOW WILL RESULT IN THE VOIDING OF THIS LIMITED WARRANTY.
(1) Improper assembly, including failure to properly install all safety equipment.
(2) Improper installation.
(3) Unauthorized alternations of goods.
(4) Goods operated when obviously in need of repair.
(5) Use of unauthorized repair parts.
(6) Irresponsible operation.
(7) Used to handle materials other than free flowing, nonabrasive and dry materials, as intended.
(8) Damaged through abusive use or accident.
Limitation of BUYER AGREES THAT IN NO EVENT SHALL HUTCHINSON/MAYRATH HAVE LIABILITY FOR DIRECT
Liability: DAMAGES THE EXCESS OF THE CONTRACT PRICE OF THE GOODS IN RESPECT OF WHICH CLAIM
IS MADE. BUYER FURTHER AGREES THAT IN NO EVENT SHALL HUTCHINSON/MAYRATH ON ANY
CLAIM OF ANY KIND HAVE LIABILITY FOR LOSS OF USE, LOSS OF PROFITS, OR FOR ANY INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
PARTS LIST
Page PB - 0
The first edition of the Parts Book was released 5-2012
NOTE: Serial number or date ranges applicable to each model or model variation are given.
Equipment with serial numbers or dates nearing the beginning or ending numbers or dates
may include components from and earlier or later model or model variation. Carefully examine the auger and the parts list to identify the correct parts.
01-2013
PB 1039338 - PB 0
PARTS LIST
Page PB - 1
SAFETY SIGNS & DECALS
JUNE 20, 2011 SN 940586 to PRESENT
5
1
10
2
3
8
4
10
6
9
7
1
5
2
3
4
7
6
9
8
Ref.
No.
1
2
3
4
5
6
Part
No.
1001973
1001980
1001974
1005324
1001981
1001985
01-2013
Description
Caution Decal, General Information
Danger, Electrocution Hazard...
Warning, Escaping Hydraulic Oil
Danger, Missing Guards
Danger, Upending Hazard
Danger, Rotating Auger
Ref.
No.
7
8
Part
No.
1001983
1001984
9 1001986
10 1001987
10
Description
Danger, Rotating Driveline
Danger, Do Not Attempt
Disassembly
Danger, Rotating Auger Inside
Danger, Do Not Operate with
Cover Open
PB 1039338 - PB 1
0402125
PARTS LIST
Page PB - 2
SAFETY SIGNS & DECALS (con’t.)
16 18
11
12
13
17
14 15
11
14
13
15
12
16
Ref.
No.
Part
No.
11
12
13
14
15
16
1001975
1004460
1013783
13-10021
13-10022
1002805
17
Description
Warning, Transport Width
Caution, Rotating Winch Handle
Notice, Detach PTO Before...
Danger, Rotating Driveline
Danger, Shield Missing
Caution, Cable Out/Cable In
18
Ref.
No.
Part
No.
17 1004461
18 2169A1
* 1021179
* 1021180
* 1021181
Description
Operator’s Manual Inside
Caution, Winch Operation
Red Reflective Decal
Yellow Reflective Decal
Orange Fluorescent Decal
* Not Illustrated
01-2013
PB 1039338 - PB 2
0402126
Page PB - 3
PARTS LIST
JULY 19, 2002 SN 904714 - MARCH 14, 2009 SN 928506
01-2013
PB 1039338 - PB 3
PARTS LIST
Page PB - 4
JULY 19, 2002 SN 904714 - MARCH 14, 2009 SN 928506
01-2013
PB 1039338 - PB 4
Page PB - 5
PARTS LIST
JULY 19, 2002 SN 904714 - MARCH 14, 2009 SN 928506
01-2013
PB 1039338 - PB 5
PARTS LIST
Page PB - 6
JULY 19, 2002 SN 904714 - MARCH 14, 2009 SN 928506
Ref.
No.
01-2013
Part
No.
Description
PB 1039338 - PB 6
Page PB - 7
PARTS LIST
JULY 19, 2002 SN 904714 - MARCH 14, 2009 SN 928506
01-2013
PB 1039338 - PB 7
PARTS LIST
Page PB - 8
JULY 19, 2002 SN 904714 - MARCH 14, 2009 SN 928506
Ref.
No.
01-2013
Part
No.
Description
PB 1039338 - PB 8
PARTS LIST
Page PB - 9
MAIN AUGER COMPONENTS
MARCH 15, 2009 SN 928506 to PRESENT
2
72’ Model
5
15
12
3
82’ Model
11
Part
No.
1
1033632-130
2
1033524-130
3
1033531-130
4
1033633-230
(4)
1033633-330
5
1033605-130
6
1033598-130
7
1033599-230
(7)
1033599-330
8
1033491-130
9
1033526-230
(9)
1033526-330
10
1033534-130
9
17
15
19 20 21
6
18
12
Description
Lower Tube Section f/ 62’
25’-0” long (7.62 m)
25’-0” long (7.62 m)
25’-0” long (7.62 m)
Mid Tube Section f/ 62’
20’-0 long (6.10 m) Hutchinson
20’-0 long (6.10 m) Mayrath
20’-0 long (6.10 m)
Lower Mid Tube Section f/ 82’
20’-0” long (6.10 m)
Upper Mid Tube Section f/ 82’
20’-0” long (6.10 m) Hutchinson
20’-0” long (6.10 m) Mayrath
Head Tube Section f/ 62’
15’-0” long (4.57 m)
15’-0” long (4.57 m)
All part numbers with a -130 are Galvanized and
with a -170 are Painted
01-2013
0402127
13
15
17
11
Ref.
No.
16
12
11
8
15
4
15
1
62’ Model
15
18
Ref.
No.
11
(11)
12
(12)
13
(13)
14
(14)
15
16
(16)
17
(17)
(17)
(17)
18
(18)
(18)
(18)
19
20
21
14
7
15
13
12
Part
No.
1021249
1021255
1021247
1021253
1021250
1021256
1021248
1021254
1033444
1033577
1033578
1033616
1033617
1034337
1034338
1033572
1033574
1034219
1034222
1034234
D1152
33027
10
Description
Lower Flight, 26’-8” (8.13 m) 7 ga.
Lower Flight, 26’-8” (8.13 m) 1/4”
Mid Flight, 20’-0” (6.10 m) 7ga.
Mid Flight, 20’-0” (6.10 m) 1/4”
Head Flight, 15’-0” (4.57 m) 7 ga.
Head Flight, 15’-0” (4.57 m) 1/4”
Head Flight, 25’-0” (7.62 m) 7 ga.
Head Flight, 25’-0” (7.62 m) 1/4”
Connecting Band, 13” Swing-Away
Track, RH, 240” (6.10 m) f/ 62’
Track, LH, 240” (6.10 m) f/ 62’
Track, Upper RH, 208.5” (5.30 m) f/ 72’
Track, Upper LH, 208.5” (5.30 m) f/ 72’
Track, Lower RH, 118.5” (3.01 m) f/ 72’
Track, Lower LH, 118.5” (3.01 m) f/ 72’
Track, Upper RH, 240” (6.10 m) f/ 82’
Track, Upper LH, 240” (6.10 m) f/ 82’
Track, Lower RH, 94” (2.39 m) f/ 82’
Track, Lower LH, 94” (2.39 m) f/ 82’
Tensioner Rod, 82’ Models Only
Nut, 3/4-10 Non-Lock, f/ 82’ Only
Flat Washer, 3/4” f/ 82’ Only
PB 1039338 - PB 9
PARTS LIST
Page PB - 10
JANUARY 15, 2008 - MARCH 14, 2009 SN 928506
Part
No.
Ref.
No.
1
1021328-170
2
1021261-170
3
1021264-170
4
1021329-270
(4) 1021329-370
5
1021262-170
6
1021265-170
7
1021266-270
(7) 1021266-370
8
1030530-170
9
1030531-270
(9) 1030531-370
10 1030532-170
Description
25’-0” long (7.62 m)
25’-0” long (7.62 m)
25’-0” long (7.62 m)
20’-0 long (6.10 m)
20’-0” long (6.10 m)
15’-0” long (4.57 m)
15’-0” long (4.57 m)
Ref.
No.
Part
No.
Description
11
(11)
1021249
1021255
Lower Flight, 26’-8” (8.13 m) 1/4”
12
(12)
1021247
1021253
Mid Flight, 20’-0” (6.10 m) 7ga.
Mid Flight, 20’-0” (6.10 m) 1/4”
13
(13)
1021250
1021256
Head Flight, 15’-0” (4.57 m) 7 ga.
Head Flight, 15’-0” (4.57 m) 1/4”
14
(14)
1021248
1021254
Head Flight, 25’-0” (7.62 m) 7 ga.
Head Flight, 25’-0” (7.62 m) 1/4”
Note all of the part numbers with a -170 are Painted.
01-2013
PB 1039338 - PB 10
PARTS LIST
Page PB - 11
JULY 19, 2002 SN 904714 - JANUARY 14, 2008 SN 922058
Part
No.
Ref.
No.
1
1021328-170
2
1021261-170
3
1021264-170
4
1021329-270
(4)
1021329-370
5
1021262-170
6
1021265-170
7
1021266-270
(7)
1021266-370
8
1030530-170
9
1021263-270
(9)
1021263-370
10
1021267-170
01-2013
Description
25’-0” long (7.62 m)
25’-0” long (7.62 m)
25’-0” long (7.62 m)
20’-0 long (6.10 m)
20’-0” long (6.10 m)
15’-0” long (4.57 m)
15’-0” long (4.57 m)
Ref.
No.
Part
No.
Description
11 1021249
(11) 1021255
Lower Flight, 26’-8” (8.13 m) 1/4”
12 1021247
(12) 1021253
Mid Flight, 20’-0” (6.10 m) 7ga.
Mid Flight, 20’-0” (6.10 m) 1/4”
13 1021250
(13) 1021256
Head Flight, 15’-0” (4.57 m) 7 ga.
Head Flight, 15’-0” (4.57 m) 1/4”
14 1021248
(14) 1021254
Head Flight, 25’-0” (7.62 m) 7 ga.
Head Flight, 25’-0” (7.62 m) 1/4”
PB 1039338 - PB 11
PARTS LIST
Page PB - 12
HEAD BEARING COMPONENTS
Ref.
No.
1
2
3
4
5
Part
No.
1029154
1010A
1030538
1030536
1030467
5
2
Description
Head Stub, Tension Mount
Bearing, 1 1/2” bore (4 hole flange)
Shield, Head Stub
End Plate, Bolt-on (Head Bearing)
Nut, 1 1/2-6 Nylon Lock
3
4
1
JANUARY 15, 2008 SN 922089 MARCH 14, 2009 SN 928506
Ref.
No.
15
16
17
18
19
20
21
22
23
24
Part
No.
1029154
1010A
1030538
1030536
1030467
1002227
33138
33060
33136
33135
Description
Head Stub, Tension Mount
Bearing, 1 1/2” bore (4 hole flange)
Shield, Head Stub
End Plate, Bolt-on
Nut, Nylon Lock, 1 1/2”
Bolt, 1/2 - 13 x 1 1/2”
Nut, Nylon Lock, 1/2 - 13
Bolt, 3/8” - 16 x 1”
JULY 19, 2002 SN 904714 JANUARY 14, 2008 SN 922089
Ref.
No.
34
35
36
Part
Description
No.
1010502 Head Stub (2” to 1 1/2” dia)
1010A
Bearing - 1 1/2” Bore (4-hole flange)
1004300 Head Cover
0402133
01-2013
0402134
PB 1039338 - PB 12
PARTS LIST
Page PB - 13
INLET HOPPER COMPONENTS JANUARY 15, 2008 SN 922089 to PRESENT
EXCEPTIONS SEE NOTES BELOW
36
25
26
38 39
31
11
37
The Operator’s Manual Cannister
attaches to a tube clamp located on
the lower portion of the inlet hopper.
13
18
19
3
4
15
8
10
12
40
33
34
21 22
27 28
20
14
22 24
9
35
32
23
25
30
16
1
2
6
Ref.
No.
1
Part
No.
5
29
7
Description
1015268
PTO Driveline See page PB-45 for
Breakdown
2
1038D
Key, 3/8” sq. x 2”
3
1032108
Sprocket, #80 17 tooth, 1.25” bore
4
8371C
Key 1/4” sq. x 1 1/2”
5
1021047
Sprocket, #80 17 tooth, 2.0” bore
6
50307A1
Key 1/2” sq. x 1 1/2”
7
3090L1
Bearing, 2.4375” bore (4 hole flange)
8
8370C
9
1010391
Roll Chain, #80-35 pitch
10
EXCEPTION NOTE
1038357
Shield, Driveline Chain
1032168
Shield, Driveline Chain
JANUARY 15, 2008 SN 922089 to JUNE 19, 2011 SN 940586
11
1005586
Access Door Plate
12
1005442
Washer, Spacer
13
1029150
Washer, Retaining, 2.25” O.D.
14
EXCEPTION NOTE
1037674
Inlet Hopper
1032465
Inlet Hopper
MARCH 15, 2009 sn 928506 to JUNE 19, 2011 SN 940586
1032081
Inlet Hopper
JANUARY 15, 2008 SN 922089 to
MARCH 14, 2009 SN 928506
15
1029960
Stub, Inlet Hopper
16
1018671
Clean-Out Door Plate
17
1011572
Jack w/ Connecting Pin
01-2013
0402128
17
Ref. Part
No. No.
Description
18 1018899-1
Gearbox, 68° (lower box)
See page PB-43 for Breakdown
February 15, 2011 SN 938507 to Present
18 1018899
Gearbox, 68° (lower box)
See page PB-44 for Breakdown July 19, 2002 SN 904714
to February 14, 2011 SN 938482
19 EXCEPTION NOTE
1039139
Hook f/ PTO Driveline Storage
1021046
Hook f/PTO Driveline Storage
JANUARY 15, 2008 SN 922089 to JUNE 19, 2011 SN 940586
Sprocket, Idler (11 tooth, 3/4” bore)
20 40953
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
1032158
33027
33112
33140
33135
1021050
1002228
33138
33139
33244
1036990
1032784
1034637
1001986
1001983
1001987
1004460
D1174
33136
1013783
Spacer Bushing (f/ idler)
Washer, 3/4” PLT
Bolt, 3/4-10 x 3” G5 PLT
Nut, 3/4-10 Nylon Lock PLT
Nut, 5/16-18, Nylon Lock PLT
Screw, 1/4” x 3/4” Self-Tapping
Bolt, 1/2-13 x 2” G5 PLT
Bolt, 5/8-11 x 2” G5 PLT
Cannister, Operator’s Manual
Bracket, Idler Sprocket
Spacer Plate, Inlet Hopper
Danger Decal, Rotating Auger
Danger Decal, Rotating Driveline
Danger Decal, Do Not Operate...
Caution Decal, Winch Handle
Bolt, 3/8-16 x 2 1/4” G5 PLT
Caution Decal, PTO & Grease
PB 1039338 - PB 13
PARTS LIST
Page PB - 14
INLET HOPPER COMPONENTS
EXCEPTION SEE NOTES BELOW
Ref.
No.
15
16
17
18
19
20
21
22
23
24
25
01-2013
Part
No.
Description
1015268
PTO Driveline
(See Page PB-45 for parts Breakdown)
1038D
Key, 3/8” sq. x 2” Not Shown it is
installed between the driveline and the
gearbox.
1021047
Sprocket, #80 17 tooth, 2” bore
50307A1 Square Key 1/2” sq. x 1 1/2” long
40329
Sprocket, #80 19 tooth, 1 1/4” bore
8371C
Square Key, 1/4” sq. x 1 1/2” long
41058
Bearing, 2” bore (4 hole flange)
8370C
1010391
Roll Chain, #80-35 pitch
1021319
Chain & Driveline Shield
1005586
Access Door Plate
1005442
1” O.D. Spacer Washer
Ref.
No.
Part
No.
Description
26
1029150
2-1/4” O.D. Retaining Washer
EXCEPTION NOTE
1005443
2” O.D. Retaining Washer
Used on SN 904714 - 914223
27
28
1021340
1021259
29
30
31
32
33
Inlet Hopper
Spacer Bushing
(2 5/8” O.D. x 2” I.D. x 1 3/8” lg
1021260
Inlet Stub
1018671
Clean-Out Door Plate
1011572
Jack Assembly
1018899-1 Gearbox
(See Page PB-44 for parts Breakdown)
1021046
Hook for PTO Driveline
PB 1039338 - PB 14
PARTS LIST
Page PB - 15
TRUSS COMPONENTS
JANUARY 15, 2008 SN 922089 to PRESENT
3
12
6
62’ Models use 2 Truss Assembly’s
72’ & 82’ Models use 3 Truss Assembly’s
4
13
7
1
5
Items No. 5 & 6 are
used only on the 72’
and 82’ Models
5
1
2
1
3
10
11
1
6
2
5
3
5
1
7
2
4
7
1
2
3 Truss Assembly
Shown as Reference Only
4
9
8
Ref.
No.
1
2
3
4
5*
6*
7
Part
No.
1019160
1019157
1019156
3010L11
1031860
1031864
1021332
(7) 1018787
01-2013
Description
Truss Side, 32 1/4” lg (81.9 cm)
Crossbrace, lower, 18 1/4” lg (46.4 cm)
Crossbrace, top, 26 3/8” lg (67.0 cm)
Cable Clamp, 3/8”
Truss Side, 38” (96.5 cm) f/ 72’ & 82’
Crossbrace, top, 30” (76.2 cm) f/ 72’ & 82’
Cable, 3/8” dia. x 100’ (10 mm x 30.48 m)
f/ 62’ Models
Cable, 3/8” dia. x 104’ (10 mm x 31.70 m)
f/ 72’ Models
Ref.
No.
Part
No.
(7) 1021068
8
9
10
11
12
13
866015-1
D1170
33276
33139
33229
33136
Description
Cable, 3/8” dia. x 135’
(10 mm x 41.15 m) f/ 82’ Models
Eyebolt, 5/8”
Nut, 5/8-11 Non-Lock PLT
Bolt, 5/8-11 x 1 1/2” G5 PLT
Bolt, 3/8-16 x 1 14” G5 PLT
* Used for the middle truss support only
on 72’ and 82’ Models
PB 1039338 - PB 15
0402129
PARTS LIST
Page PB - 16
TRUSS COMPONENTS
JULY 19 ,2002 SN 904714 - JANUARY 14, 2008 SN 922058
Ref.
No.
1
2
3
4
5
Part
No.
1019160
1019157
1019156
3010L11
1021332
1018787
6
7
01-2013
1021068
866015-1
D1150
Description
Truss Side, 32 1/4” lg (81.9 cm)
Crossbrace, lower, 18 1/4” lg (46.4 cm)
Crossbrace, top, 26 3/8” lg (67.0 cm)
Cable Clamp, 3/8”
Cable, 3/8” dia. x 100’ (10 mm x 30.48 m)
f/ 62’ Models
Cable, 3/8” dia. x 104’ (10 mm x 31.70 m)
f/ 72’ Models
Cable, 3/8” dia x 135’ (10 mm x 41.15m) for 82’ Swing Away
5/8” Eyebolt
5/8” Non - Lock Nut
PB 1039338 - PB 16
PARTS LIST
Page PB - 17
UNDERCARRIAGE COMPONENTS
7
3
5/8” x 2” Bolt and
Nylon Locknut
6
1” x 11” Bolt
and Nylon Locknut
1/2” x 1 1/2” Bolt,
Flat Washer and
Nylon Locknut
1
1” x 3” Bolt, Flat
Washer, Spacer
and Nylon Locknut
4
4
5
13
1/2” x 1 1/2” Bolt
and Nylon Locknut
1/2” x 3 1/4” Bolt
and Nylon Locknut
12
NOTE: Connecting Tube
(Item 14) Bolts to the Bottom
Side of the Lower Arm
ÄÄ
ÄÄÄÄÄ
6
16
When installing axle,
make sure reflective
decals are facing up.
1/2” x 3 1/4” Bolt
and Nylon Locknut
1
14
1/2” x 5 1/2” Bolt &
Nylon Locknut
Nylon Locknut
18
16
Items 17 & 18
w/82’ Models
Only
17
1/2” x 1 1/2” Bolt, Flat
Washer and Nylon Locknut
11
2
18
1/2” x 1 1/2” Bolt and
Nylon Locknut
10
Inlet End
of Auger
15
9
10
Connects
Mount
Connects to Mount
onAuger
Conveyor
Housing
on
Housing
Nylon Locknut
8
1” x 3” Bolt, Flat Washer,
Spacer and Nylon Locknut
PB 1039338 - PB 17
01-2013
0402130
PARTS LIST
Page PB - 18
Ref.
No.
1
Part
No.
1019205
(1) 1018362
(1) 1033937
2
1019204
(2) 1018361
(2) 1033938
3
4
(4)
(4)
5
(5)
(5)
6
(6)
(6)
1020041
1019207
1018360
1033971
1019207
1018360
1033971
1021382
1021383
1034148
7
1021364
(7) 1021062
8
9
1021198
1020033
Description
Lower Arm (left) 206.5” lg.
(5.25 m) f/ 62’ Models
(5.85 m) f/ 72’ Models
Lower Arm (left) 266” lg.
(6.76 m) f/ 82’ Models
Lower Arm (right) 206.5” lg.
(5.25 m) f/ 62’ Models
(5.85 m) f/ 72’ Models
Lower Arm (right) 266” lg.
(6.76 m) f/ 82’ Models
Trolley Bushing, 7 5/8” lg. (19.4 cm)
Upper Arm, 219.25” lg. (5.57 m) f/ 62’
Upper Arm, 236” lg. (5.99 m) f/ 72’
Upper Arm, 270” lg. (6.86 m) f/ 82’
Upper Arm, 219.25” lg. (5.57 m) f/ 62’
Upper Arm, 236” lg. (5.99 m) f/ 72’
Upper Arm, 270” lg. (6.86 m) f/ 82’
Axle, f/ 62’ Models
Axle, f/ 72’ Models
Axle, Collapsible f/ 82’ Models
(See page PB-24 for Breakdown)
Trolley, f/ 62’ Models
Trolley, f/ 72’ & 82’ Models
Bushing (1 1/2” O.D. x 15/16” long)
Lower Pivot Bracket
Ref.
No.
Part
No.
10 1020036
1033953
11 1019219
(11) 1020015
(11) 1033952
12 1019589
(12) 1019134
(12) 1034079
13 1021065
14 1019218
(14) 1019132
(14) 1034227
15
16
17
18
1033959
1021204
1034253
1029094
SPINDLE & HUB ASSEMBLY
f/ 62’ & 72’ MODELS
Ref.
No.
Part
No.
1
2
3
4
5
6
7
8
9
10
11
12
1021377
1026088
1026089
1026090
1025911
3148R1
3079R1
106241
D1148
D1147
107230
107234
01-2013
Description
Lower Pivot Brace f/ 62’ and 72’ Models
Lower Pivot Brace f/ 82’ Models
Lower Arm X-Brace, 85.75” lg. (2.18 m)
f/ 62’ Models
f/ 72’ Models
f/ 82’ Models
Upper Arm X-Brace, 80.5” lg. (2.04 m)
f/ 62’ Models
f/ 72’ Models
f/ 82’ Models
Bushing (1 1/2” O.D. x 11/16” lg.)
Connecting Tube, 91.25” lg (2.32 m)
f/ 62’ Models
f/ 72’ Models
f/ 82’ Models
Lower Pivot Cross Support
Reflector Bracket
Cross Stiffener, 82’ Models Only
End Plate, 82’ Models Only
2
3
4
1
Description
Spindle (weld-in)
Grease Seal
Inner Cone (Timken No, JL69349)
Inner Cup (Timken No, JLM506810)
Hub (furnished with cups)
Outer Cup (Timken No. LM67010)
Outer Cone (Timken No. LM67048)
Lug Bolt
Washer, 2.00” O.D. x 15/16” I.D. 8 ga.
Slotted Hex Nut (castle nut)
Cotter Pin, 5/32” x 1 3/4”
Dust Cap, Wheel Hub
6
7
5
11
9
12
10
8
PB 1039338 - PB 18
0402131
PARTS LIST
Page PB - 19
COLLAPSIBLE AXLE
82’ MODELS ONLY
19
2
3
6
3
2
1
4
5
19
6
4
5
10
5
11
13
8
7
9
17
14
12
16
15
18
The Complete Axle Assembly can be Obtained by Ordering Part No. 1034148
(complete axle assembly includes all parts listed below)
Ref.
No.
Part
No.
Description
1
2
3
4
5
6
7
8
1033923
1021179
1021181
1033842
1033649
1033931
1025911
1026090
Hub & Axle Assembly
Axle/Spindle Ay. w/o hub
Pin Weldment f/ Collapsible Axle
• Inner Bearing Cup
9
3148R1
• Outer Bearing Cup
Axle Tube f/ Collapsible Axle
• Decal, Red Retroreflective
• Decal, Orange Transport
(Timken No. JLM506810)
(Timken No. LM67010)
10 1033876
Ref.
No.
Part
No.
Description
11 1026088
12 3079R1
Grease Seal
Outer Cone Bearing
13 1026089
Inner Cone Bearing
(Timken No. LM67048)
(Timken No. JL69349)
14
15
16
17
18
19
106241
D1147
D1148
107230
107234
D1166
Lug Bolt, 1/2-20 x 1 1/2”
Washer, 2.00” O.D. x 15/16” I.D. 8 ga.
Cotter Pin, 5/32” x 1.75”
Dust Cap, Wheel Hub
Hair Pin
Spindle (weld-in)
• Indented parts names indicate these parts
are included in the previous assembly.
01-2013
PB 1039338 - PB 19
0402132
PARTS LIST
Page PB - 20
THIS PAGE WAS INTENTIONALLY LEFT BLANK
01-2013
PB 1039338 - PB 20
Page PB - 21
PARTS LIST
JULY 19, 2002 SN 944714 - MARCH 14, 2009 SN 928506
7
01-2013
PB 1039338 - PB 21
PARTS LIST
Page PB - 22
JULY 19, 2002 SN 944714 - MARCH 14, 2009 SN 928506
Ref.
No.
1
(1)
(1)
2
(2)
(2)
3
4
(4)
(4)
5
(5)
(5)
6
(6)
Part
No.
Description
1019205
(5.25 m) f/ 62’ Models
1018362
(5.85 m) f/ 72’ Models
1019233
(6.85 m) f/ 82’ Models
1019204
(5.25 m) f/ 62’ Models
1018361
(5.85 m) f/ 72’ Models
1019234
(6.85 m) f/ 82’ Models
1020041
Trolley Bushing, 7 5/8” lg. (19.4 cm)
1019207
Upper Arm, 219.25” lg. (5.57 m) f/ 62’
1018360
Upper Arm, 236” lg. (5.99 m) f/ 72’
1019244
Upper Arm, 275.75” lg. (7.00 m) f/ 82’
1019207
Upper Arm, 219.25” lg. (5.57 m) f/ 62’
1018360
Upper Arm, 236” lg. (5.99 m) f/ 72’
1019244
Upper Arm, 275.75” lg. (7.00 m) f/ 82’
IF EITHER OF THE AXLE NUMBERS BELOW ARE
REQUESTED PLEASE USE THE NUMBERS
LISTED UNDER THE EXCEPTION
1019206
Axle, 62’ Models (126.75” long)
1019052
Axle,72’ & 82’ Models (150.75” long)
Ref. Part
No.
No.
10 1020036
1019217
11
1019219
(11) 1020015
(11) 1019249
12
1019589
(12) 1019134
(12) 1019247
13
14
1021065
1019218
(14) 1019132
(14) 1019243
Description
Lower Pivot Brace f/ 62’ and 72’ Models
(28” long)
Lower Pivot Brace f/ 82’ Models
( 32” long)
f/ 62’ Models
f/ 72’ Models
f/ 82’ Models
f/ 62’ Models
f/ 72’ Models
Upper Arm X-Brace, 103” lg. (2.62 m)
f/ 82’ Models
Bushing (1 1/2” O.D. x 11/16” lg.)
f/ 62’ Models
f/ 72’ Models
f/ 82’ Models
Lower Pivot Cross Support
Reflector Bracket
15
16
1020030
1021204
17
18
EXCEPTION NOTE THE ITEMS BELOW ARE
USED ON SN 916982 TO PRESENT
1034253
Cross Stiffener, 82’ Models Only
1029094
End Plate, 82’ Models Only
EXCEPTION NOTE THE ITEMS BELOW ARE
USED ON SN 909348 TO PRESENT
Axle, 62’ Models
Axle,72’ & 82’ Models
THE 82’ MODEL WAS CHANGED TO A
COLLAPSIBLE AXLE STARTING JUNE 20, 2011 SN 940586
6 1021382
(6) 1021383
7 1021364
(7) 1021062
8
9
1021198
1020033
Trolley, f/ 62’ Models
Trolley, f/ 72’ & 82’ Models
(See Page PB-24 for tolley parts)
Bushing (1 1/2” O.D. x 15/16” long)
Lower Pivot Bracket
SEE NOTES ON THE FOLLOWING PAGE
FOR UNITS STARTING JULY 19, 2002
SN 904714 - MARCH 14, 2009 SN 928506
01-2013
PB 1039338 - PB 22
PARTS LIST
Page PB - 23
SEE NOTES ON THE FOLLOWING PAGE FOR UNITS STARTING JULY 19, 2002 SN 904714 MARCH 14, 2009 SN 928506 MODELS 62’ , 72’ & 82’ LONG
SN 909348 - MARCH 14, 2009 SN 928506
Ref.
No.
1
2
3
4
5
6
7
8
9
10
11
12
Part
No.
1021377
1026088
1026089
1026090
1025911
3148R1
3079R1
106241
D1148
D1147
107230
107234
01-2013
Description
Spindle (weld-in)
Grease Seal
Inner Cone (Timken No, JL69349)
Inner Cup (Timken No, JLM506810)
Lug Bolt
Washer, 2.00” O.D. x 15/16” I.D. 8 ga.
Cotter Pin, 5/32” x 1 3/4”
Dust Cap, Wheel Hub
JULY 19, 2002 SN 904714 - SN 909348
Ref.
No.
1
2
3
4
5
6
7
8
9
10
11
12
Part
No.
1019020
3074R1
3080R1
3149R1
3071R1
3148R1
3079R1
106241
D1148
D1147
107230
40588
Description
Spindle (weld-in)
Grease Seal
Inner Cone (Timken No, LM501349)
Inner Cup (Timken No, LM501310)
Lug Bolt
Washer, 2.00” O.D. x 15/16” I.D. 8 ga.
Cotter Pin, 5/32” x 1 3/4”
Dust Cap, Wheel Hub
PB 1039338 - PB 23
PARTS LIST
Page PB - 24
24 TROLLEY COMPONENTS
STARTS JULY 19, 2002 SN 904714 to PRESENT
7
8
4
9
3
5
2
62’ Models
1
6
5
9
4
5
3
4
5
6
72’ & 82’ Models
7
10 11
8
Complete Trolley Assembly can be Obtained,
Order Part No. 1021364 (62’ Models)
1021062 (72’ & 82’ Models)
Ref.
No.
Part
No.
1
2
3
(3)
4
5
1021077
1021060
1021155
1021154
1021146
1031583
01-2013
Description
Trolley f/ Winch Lift
Roller f/ Trolley
Pulley Clevis, f/ 62’ Models
Pulley Clevis f/ 72’ & 82’ Models
Bushing, Pulley Anchor
Spacer, 3/8” thick
Ref.
No.
Part
No.
6
7
8
9
10
11
1021160
1021064
1007943
D1165
1021057
3337A1
Description
Pulley, f/ 1/2” dia. Cable
Bolt, 1-8 x 3 1/2” (Gr 8)
Nut, 1-8 Lock
Cotter Pin, 1/4” x 3”
Roller Pin
Cotter Pin, 3/16” x 1 1/2”
PB 1039338 - PB 24
0402133
0402134
PARTS LIST
Page PB - 25
SWING-AWAY HOPPER LIFT COMPONENTS
STARTS JULY 19, 2002 SN 904714 to PRESENT EXCEPTION SEE NOTES BELOW
6
17
6
17
16
16
18
14
6
8
7
8
11
15
7
14
12
6
15
13
18
14
10
1
Winch Model - K1550 w/ Handle
5
9
Hopper Lift Cable, Part No. 1003819
1/4” dia. x 28’ long (6 mm x 8.53 m)
3
4
Ref.
No.
1
2
3
4
5
6
7
8
9
01-2013
Part
No.
1021213
3335A11
(See page
41595
4160D
1003819
1007890
1008195
1008197
106411
Description
Plate, Winch Mounting
Winch, Complete
PB-48 for Breakdown)
Handle, Winch
Winch Keeper Kit
Cable, Hopper Lift
Plate, Pulley Clevis
Pulley, 3” O.D. x 1” I.D.
Bushing, Pulley, 1” O.D.
Hopper Hook
Ref.
No.
Part
No.
10 6369C
2
Description
Clamp, 1/4” Cable
EXCETION NOTE
JULY 19, 2002 SN 904714- MARCH 14, 2009 SN 928506
Lift Arm with Pulley Clevis
11 1021093
Lift Arm with Pulley Clevis
11 1034309
12
13
14
15
16
17
18
1010582
1021121
635164
33138
33247
33197
1025584
Pin, Retaining
Pin, Attachment
Hair Pin
Nut, 1/2-13 Nylon Lock
Bolt, 1/2-13 x 1 3/4” Gr5
Bolt, 1/4-20 x 1 1/4” Gr5
Locknut, 1/4-20
PB 1039338 - PB 25
0402135
PARTS LIST
Page PB - 26
This page was intentionally left blank.
1-2013
PB 1039338 - PB 26
PARTS LIST
Page PB - 27
HYDRAULIC WINCH LIFT COMPONENTS JULY 19, 2002 SN 904714 to PRESENT
5 18
13
16
6
8
17
4
7
9
13
5 18
62’ Models
14
15
10
6
8
11
10
7
9
72’ & 82’ Models
17
8
4
12
7
2
6
9
5 18
The winch and the upper & lower
guard halves (Items 1, 2 & 3) are
used for the 62’, 72’ & 82’ Models
1
3
Ref.
No.
1
2
3
4
5
6
7
8
Part
No.
Description
12
1021069
Winch, Complete (hydraulic)
(See page PB-28 for Breakdown and page
(12)
PB-29 for hose information)
1021242
Upper Guard Half (winch)
13
1021237
Lower Guard Half (winch)
14
1021155
Clevis, Cable Pulley f/ 62’
1021064
Bolt, 1-10 x 3.50” G5
15
D1165
Cotter Pin, 1/4” x 3”
1021160
Pulley, f/ 1/2” Cable, 5” O.D.
16
1021146
Bushing, Cable Pulley
EXCEPTION NOTE
9
1031583
Spacer, 1 5/8” I.D. x 3/8” thick
3047R1
Spacer, 1 5/8” I.D. x 3/8” thick
JULY 19, 2002 SN 904715 MARCH 14, 2009 SN 928506
10
11
1021158
1021154
9
1-2013
Ref.
No.
Cable Clamp, f/ 1/2” cable
Clevis, Trolley Pulley f/ 72’ & 82’
0402136
17
18
Part
No.
1021091
Description
Cable, f/ 72’ Models, 1/2” dia. x 96’
(13 mm x 29.26 m)
1021084
(13 mm x 32.31 m)
1019093
1021062
(See page
1021331
Trolley Stop, Upper
Trolley, Complete (72’ & 82’ Models)
PB-24 for Breakdown)
(13 mm x 19.51 m)
1021364
Trolley, Complete (62’ Models)
EXCEPTION NOTE
1031146
Trolley Stop Lower
1007943
Nut, 1-8 Lock
PB 1039338 - PB 27
PARTS LIST
Page PB - 28
HYDRAULIC WINCH COMPONENTS JULY 19, 2002 SN 904714 to PRESENT
20
23
7
8
11
6
22
9
14
21
14
5
9
15
15
4
24
3
12
19
13
1
2
10
18
15
21
14
9
16
26
17
25
The Part No’s. Shown are Bloom Manufacturing Part No’s.
Ref.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Part
No.
W-202-1-25
10-203-1-25
10-206
12-208
W-210K
10-216
10-217
10-220
W-226
W-227
W-229
W-232
W-233
W-234
Description
Worm Shaft, 40:1 Ratio
Bronze Gear, 40:1 Ratio
Gear Case Cover
End Bearing, 1 1/2” I.D. x 3 1/8” O.D.
Gear Case Cover Gasket Kit
Oil Seal
Key, 3/8” sq. x 1 7/16” long
Retaining Ring, External, 1 1/2”
Pipe Plug, 3/8”
Bolt, 5/16-18 NC x 1” HT
Setscrew, 1/2” x 1/2” Socket
Bearing Cup, 3/4” (21212)
Bearing Cone, 3/4” (21075)
Bearing Cup, 1 1/2” (LM29710)
Parts can be ordered directly from Bloom
Manufacturing, Inc.
When Ordering Parts, Specify Serial No. and Model
Stamped on Winch Cover
1-2013
0402137
Ref.
No.
Part
No.
15
16
17
18
W-235
W-236
W-237K
W-249
19
20
21
22
23
24
25
26
W-250
4853-1
W-258
10-265
10-269
10-278
10-4845
W-3231
Description
Bearing Cone, 1 1/2” (LM29749)
Spacer, .270 - .275
Gasket Kit f/ Motor
Bolt, 7/16-17 NC x 1 1/2” HT
& 7/16” Lock Washer
Key, 1/4” x 1” Woodruff
Spec. Drum
Setscrew, 3/8” x 1/2” Socket
Gear Case
Shaft, 1 1/2”
End Housing
BM Motor Char-Lynn 101-1042
Seal Kit, Char-Lynn H- Series
101-xxxx-009 (60540)
Bloom Manufacturing, Inc.
Winch Division
Independence, IA 50644 USA
Phone: 319-827-1139 Fax: 319-827-1140
PB 1039338 - PB 28
PARTS LIST
Page PB - 29
HYDRAULIC COMPONENTS
JULY 19, 2002 SN 904714 to PRESENT
2
2
1
4
1
3
Ref. Part
No. No.
1 1032436
(1) 1032437
2 1006324
3 1021162
4 1021163
1-2013
Description
Hydraulic Hose f/ 62’ & 72’
3/8” x 28’ lg. (10 mm x 8.53 m)
Hydraulic Hose f/ 82’
3/8” x 29’-6” lg. (10 mm x 8.99 m)
Hose Mounting Clamp
Hydraulic Winch (less relief valve)
Crossover Relief Valve
PB 1039338 - PB 29
PARTS LIST
Page PB - 30
1-2013
PB 1039338 - PB 30
PARTS LIST
Page PB - 31
SWING-AWAY HOPPER
COMPONENTS
Fasten in Place with:
2 – 1/2” x 1 1/4” Bolts
2 – 1/2” Nylon Locknuts
4 – 1/2” Flat Washers
(flat washer on the inside
and on the outside)
2 – 3/8” x 1” Bolts
24
25
4
6
25
2
5
13
24
22
22
24
27
1
6
21
7
8
27
2 – 3/8” x 1” Bolts
3
25
2 – 3/8” x 1” Bolts
9
28
4
9
28
5
Fasten Bearings
in Place with:
2 – 1/2” x 1 1/2” bolts
10
11
12
30
23
26
17
14
11
12
15
16
18
23
19
29
20
Ref.
No.
Part
No.
1
2
1032217
1021028
8379C
1032235
1032244
6303D
1032219
Intermediate Flight
Bearing Stand f/ hopper flight
• Bushing, 1” bronze
Hopper Flight, 71” (180.3 cm)
50200
Repair flight per foot number
3
4
5
6
7
8
9
10
11
12
13
Description
Coupler Box
Bearing Stand f/ intermediate flight
• Bushing, 1 1/4” bronze
Ref.
No.
Part
No.
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
8325A
8819D
1021102
6385C
1021030
1022373
1016578
1032287
1013680
4020A1
4842
33136
635164
4618-1
4003
33135
Description
Bearing, 1 1/4” bore, 2-hole flange
Shield, Chain and Sprocket
Chain, #50 33 pitch w/ link
Spacer, Hopper Wheel (1” O.D. x 7/8”)
Wheel, Hopper (10” O.D. x 5/8” bore)
Axle, Hopper Wheel
Hopper Belting
Clip, Belt Retaining
Key, 1/4” sq. x 1” lg.
Bolt, 3/8-16 x 3” G8 PLT
Hair Pin .094 dia. x 2” lg.
Bolt, 1/4-20 x 1” G5 PLT
1013676
U-Joint
1021116
Bearing Stand f/ power shaft
8379C
1021012
Power Shaft
1021020
Clip, Door Retaining
1032220
Hopper, Swing-Away
6818D
Bearing, 1” bore, 2-hole flange
5204H
1021122
End Strap, Belting
• Indented parts names indicate these parts are included in the previous assembly.
1-2013
0402138
PB 1039338 - PB 31
PARTS LIST
Page PB - 32
SWING-AWAY HOPPER COMPONENTS JULY 19, 2002 SN 904714 JANUARY 14, 2008 SN 922058 EXCEPTION SEE NOTES BELOW
Ref.
No.
Part
No.
Description
Coupler Box
1 1021006
Bearing Stand f/ intermediate flight
2 1021028
8379C
(with bushing, 1 1/4” bronze)
EXCEPTION NOTE
SN 911881 - JANUARY 14, 2008 SN 922058
Intermediate Flight
3 1027574
JULY 19, 2002 SN 904714 - SN 911880
3 0121011 Intermediate Flight
Bearing Stand f/ hopper flight
4 1021017
6303D
• Bushing, 1” bronze
Hopper Flight, 71” (180.3 cm)
5 1021010
50199
Repair flight per foot number
6 1013676
7 1021116
8379C
8 1021012
9 1021020
U-Joint
Bearing Stand f/ power shaft
Power Shaft
Clip, Door Retaining
1-2013
Ref.
No.
10
10
11
12
13
14
15
Part
No.
Description
EXCEPTION NOTE
SN 911881 - JANUARY 14, 2008 SN 922058
1021395
Hopper, Swing-Away
JULY 19, 2002 SN 904714 - SN 911880
1021001
Hopper, Swing-Away
6818D
6815D
4020A1
8325A
8819D
4020A1
1021102
1021120
Bearing, 1” bore, 2-hole flange
1/4” Square Key x 1” long for Ref. 12
Bearing, 1 1/4” bore, 2-hole flange
1/4” Square Key x 1” long for Ref. 14
Shield, Chain and Sprocket
Chain, #50 33 pitch w/ link
PB 1039338 - PB 32
PARTS LIST
Page PB - 33
SWING-AWAY HOPPER INCLINE TUBE COMPONENTS
12
9
11
7
19 20
8
18
6
5
21
14
10 13
15
U-Joint Attaches to
Inlet Hopper Gearbox Shaft
with #1210 Woodruff Key
and Setscrews
4
Reference
Incline Flight Stub
(Item No. 3)
1
16
4
17
3
Incline Tube Attaches to
Coupler Box with:
12 – 3/8” x 1” Bolts
(bolt heads on the inside)
2
Reference Swing-Away
Hopper Assembly
Ref.
No.
Part
No.
1
2
3
1021214
1021205
1010388
The Complete Spout Assembly can be Obtained:
Order Part No. 1031584
The complete spout assembly includes Items:
6, 7, 8, 9, 10, 11, 12, 13, 19 & 20
Description
Incline Tube (only)
Flight, Incline (1/4”)
Stub, Incline Flight
(2” O.D. to 1 1/4” x 6 1/2”)
1005890
Rubber Sleeve (7/8” O.D. x 5/8” lg.)
1022801
Bushing (11/16” O.D. x 7/8” lg.)
1031516
Spout Weldment
1010380-1 Gearbox
(See page PB-39 for Breakdown
February 15, 2011 SN 938507 to Present)
(See page PB-40 for Breakdown
SN 909477 to February 14, 2011 SN 938506)
Spring Clip f/ Pop Open Door
8 90040
9 1005586
Side Access Door f/ Spout
U-joint w/ Spliced End
10 1005356
4
5
6
7
1-2013
0402139
Ref.
No.
Part
No.
11
12
13
14
15
16
17
18
19
20
21
1015290
003281
837029
4913
1002230
33025
33138
1005127
4701-1
33135
33136
Description
Plug, 1/8” NPT Vented
Key, #1210 Woodruff
Key, #809 Woodruff
Bolt, 1/2-13 x 3 3/4” G5 PLT
Bolt, 1/2-13 x 4” G5 PLT
Washer, 1/2” Flat
Nut, 1/2-13 Lock PLT
Bolt, 5/16-18 x 3/4” G5 PLT
PB 1039338 - PB 33
PARTS LIST
Page PB - 34
SWING-AWAY HOPPER INCLINE TUBE COMPONENTS
Ref.
No.
1
2
3
4
5
6
7
8
9
9
Part
No.
Description
1021001
Hopper Weldment
1021030
Hopper Wheel Spacer
(1” O.D. x 7/8” long)
1022373
Hopper Wheel (10” O.D. x 5/8” Bore)
1016578
5/8” O.D. Pin x 9 1/4” long
1021027
Hopper Belting
1013680
Belting Retaining Clip x 9 7/8” long
1021122
Belting End Strap x 4 1/2” long
1010388
Incline Flight Stub
(2” O.D. to 1 1/4” x 6 1/2” long)
EXCEPTION NOTE
July 19, 2002 SN 904714 to PRESENT
1021205
Incline Flight (1/4”)
July 19, 2002 SN 904714 - 911880
1021009
Incline Flight (7ga)
1-2013
Ref.
No.
10
11
12
13
14
15
16
17
17
18
19
20
--
Part
No.
Description
4913
1005890
1021214
1022801
1021215
003281
1015290
Bolt, 1/2-13 x 3 3/4” G5 PLT
Rubber Sleeve (7/8” O.D. x 5/8” long)
Incline Tube Weldment
Spacer Bushing (11/16” O.D. x 7/8” long)
Spout Weldment
#1210 Woodruff Key
1/8” NPT Vented Plug
EXCEPTION NOTE
December 28, 2004SN 911881 to
JANUARY 14, 2008 SN 922058
1010380-1 Gearbox
JULY 19, 2002 SN 904714 to
December 29, 2004 SN 911880
1010380
Gearbox (See page PB-41 for Breakdown)
90040
Spring Clip for Pop Open Door
1005586
Side Access Door for Spout
1005356
U-Joint w/Spline End
837029
#809 Woodruff Key for Ref. 20
PB 1039338 - PB 34
PARTS LIST
Page PB - 35
SIDE-DRIVE COMPONENTS
JUNE 20 , 2011 SN 940586 to PRESENT
24
12
10
22
19
13
1
18 21 23
17
15
7
8
14
4
3
3
5
5
5
6
16 20
2
25
21 23 26
9
20
11
20
Ref.
No.
Part
No.
1
1021297
Ref.
No.
Description
PTO Driveline, 1000 RPM
15
16
Gearbox, GB 600, 1.87:1 Ratio
17
(See page PB-38 for Breakdown) 18
Flex Coupler Half, 1.50” bore
19
20
Flex Coupler Chain
Key, 3/8” sq. x 1 1/2” long
21
22
Shield, PTO/Gearbox
Shield, Flex Coupler
23
24
Base, Gearbox Mount
Support Stand f/ Side-Drive
25
(25)
Shield, Chain Drive
26
Plate, Clamp f/ Gearbox Mount
Retaining Pin f/ PTO Driveline
PTO Storage/Transport Support
Halfband, 3” Wide f/ 13” SA
1-2013
2
1021282
3
4
5
6
7
8
9
10
11
12
13
14
1021245
1021246
4049A1
1021323
1021320
1037681
1037965
1038357
1037865
3338A1
1021312
1021311
0402140
Part
No.
33247
1002231
1031908
33025
33136
33138
33294
33310
D1143
33135
1033955
1033956
1002227
Description
Bolt, 1/2-13 x 1 3/4” G5 PLT
Bolt, 1/2-13 x 5 1/2” G5 PLT
Bolt, 1/2-13 x 6” G5 PLT
Washer, 1/2” Flat PLT
Bolt, 1/2-13 x 1” G5 PLT
Bolt, 3/8-16 x 1 1/2” G5 PLT
Washer, 1/2” Lock PLT
Shim, .0635” (2 mm) thick
Shim, .0396” (1 mm) thick
Bolt, 1/2-13 x 1 1/2” G5 PLT
PB 1039338 - PB 35
PARTS LIST
Page PB - 36
JANUARY 15, 2008 SN 922089 - JUNE 19, 2011 940586
Ref.
No.
Part
No.
1
1021297
Description
PTO Driveline, 1000 RPM
2
1021282
3
4
5
6
7
8
9
10
11
12
13
14
1021245
1021246
4049A1
1021323
1021320
1032310
1021294
1032168
1032761
3338A1
1021312
1021311
1-2013
Flex Coupler Chain
Key, 3/8” sq. x 1 1/2” long
Shield, PTO/Gearbox
Base, Gearbox Mount
Support Stand f/ Side-Drive
Shield, Chain Drive
Plate, Clamp f/ Gearbox Mount
Ref.
No.
15
16
17
18
19
20
21
22
23
24
Part
No.
1002227
1002231
1009541
33025
33136
33138
33294
33310
D1143
33135
Description
Bolt, 1/2-13 x 1 1/2” G5 PLT
Bolt, 1/2-13 x 5 1/2” G5 PLT
Bolt, 1/2-13 x 2 1/2” G5 PLT
Washer, 1/2” Flat PLT
Bolt, 1/2-13 x 1” G5 PLT
Bolt, 3/8-16 x 1 1/2” G5 PLT
Washer, 1/2” Lock PLT
PB 1039338 - PB 36
PARTS LIST
Page PB - 37
Ref.
No.
1
Part
No.
1021297
Description
Pin Stop Type PTO Driveline, 1000 RPM
3 1021245
Flex Coupler Chain
4 1021246
Key, 3/8” sq. x 1 1/2” long
5 4049A1
Shield, PTO/Gearbox
6 1021323
7 1021320
Base, Gearbox Mount
8 1037681
9 10211295 Jack Stand f/ Side-Drive
Shield, Chain Drive
10 1021319
11 1021296 Clamping Plate, f/ Gearbox Mount
12 3338A1
13 1021312
14 1021311
2
1-2013
1021282
PB 1039338 - PB 37
PARTS LIST
Page PB - 38
GEARBOX f/ SIDE-DRIVE
1
2
6
6
3
11
5
Output
Shaft
9
10
7
6
8
5
1 3/4” dia. Input Shaft
1 1/2” dia. Output Shaft
6 1/2” sq. Mounting Pattern
Ratio 1.875:1
10
4
Complete Gearbox - Part No. 1021282
Ref.
No.
1
2
3
4
5
6
7
8
Part
No.
1021354
1021339
1021341
1021342
1021343
1021344
1021345
1021346
12
Description
Casting, Mach 600 (1.875:1)
Casting, Mach 600 (1.875:1
Cross Shaft / Gear Assembly
Stub Shaft / Gear Assembly
Bearing, Cone, 1.750 VN-25581
Bearing, Cup, 3.2650 VN-25520
Bearing, Cone, 1.750 VN-3782
Bearing, Cup, 3.6178 VN-3720
Input
Shaft
Ref.
No.
Part
No.
9
10
11
12
10211347
1021348
1021349
1021350
1006232
1021351
1021352
1021353
*
*
*
*
Description
Bearing, Cone, 25580
Seal, 1.750 - 2.437 - .312 (R) TC
End Cap, CP-2.450 - .312 D #3313
Retaining Ring, Ext. 1.75 SHAFT
Bolt, 3/8-16 x 2 1/4” SHCS
Plug, 1/2-14 NPT SCHD w/ 3M
Bushing, 1/2” NPT to 1/8” NPT
Vent Plug, 5 PSI
* Not Shown
1-2013
0402141 0402142
PB 1039338 - PB 38
PARTS LIST
Page PB - 39
UPPER GEARBOX f/ SWING-AWAY INCLINE TUBE
FEBRUARY 15, 2011 SN938507 to PRESENT
14
Mounted in Swing-Away Incline Tube Spout
Complete Gearbox - Part No. 1010380-1
Ratio 1:1
Input Shaft 1 1/4” dia. w/ 1/4” Woodruff Key
Output Shaft - 1 1/2” dia. w/ 17/32” dia. bolt hole
& 3/8” Woodruff Key
25
4
3
17
11
5
21
27
19
1
2
20
23
8 9 10
6
24
13
26
18
Items 8, 9 & 10 can also be purchased
as a kit, Order Part No. 1023289
12
7
18
8 9 10
19
Ref.
No.
Part
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
3079R1
3148R1
3028R1
003538
*71-50016
1023543
003093
40382
40381
40380
1023278
1023279
*72-40001
837029
Description
Bearing Cone (LM67048)
Bearing Cup (LM67010)
Grease Zerk (1/8-27)
Snap Ring
Spacer
Retainer w/ Snap Ring
Bolt, 5/16-18 x 7/8”
Shim, .003”
Shim, .005”
Shim, .014”
Seal (Nat. #471808)
Seal (Nat. #470163)
Key, 1/4” sq. x 1.1” long
Key, Woodruff #809
Order Weasler Parts at:
Weasler Engineering Inc.
P.O. Box 558
West Bend, WI 53095
ph: 262-338-2161
1-2013
0402143
1
2
16
23
1
2
19
15
22
Ref.
No.
Part
No.
Description
15
16
17
18
19
20
21
22
23
24
25
26
27
ƒ
003281
1015290
1005472
*71-60016
*72-70007
*70-06055
*70-26028
*70-16023
*71-06036
*70-16021
*71-16067
*71-60016
035913
020009
Key, Woodruff #1210
Vented Plug, 1/8” NPT
Grease Washer
Retaining Ring
O-Ring
Housing
Bearing Housing
End Cap
Gear, 19 teeth/ DP 6
End Cap
Shaft, Input
Shaft, Output
Plug, 1/8-27 NPT
Plug, 1/4-28 NPT
* Indicates these are Weasler Part No’s.
ƒ Not Shown
PB 1039338 - PB 39
PARTS LIST
Page PB - 40
UPPER GEARBOX f/ SWING-AWAY INCLINE TUBE SN 909477 - FEBRUARY 14, 2011 SN 938482
Ref.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1-2013
Part
No.
1023523
1023524
1023525
3079R1
3148R1
1023533
003538
1023526
1023533
1023285
1023543
4701-1
40382
40381
Description
Case
Cap
End Cap f/Shaft
Bearing Cone # LM67048
Bearing Cup #LM67010
Spacer (.127 thick)
Snap Ring
End Cap - Solid
Spacer (.127 thick)
Gear 68 Degree Cut - 19 tooth
Retainer f/ Snap Ring
5/16” x 3/4” NC Capscrew
Shim .003
Shim .005
Ref.
No.
15
16
17
18
19
20
21
22
23
24
25
26
Part
No.
40380
1023278
1023279
1026640
1026641
020153
837029
003281
1015290
1005472
003381
1023282
Description
Shim .014
Seal (Nat.# 471808)
Seal (Nat.# 470163)
Shaft Output
Shaft Input
Key 1/4” Square x 7/8” lg.
Woodruff Key # 809
Woodruff Key # 1210
Washer - Grease
Snap Ring
O-Ring (3.15” O.D.)
PB 1039338 - PB 40
PARTS LIST
Page PB - 41
UPPER GEARBOX f/ SWING-AWAY INCLINE TUBE
JULY 19, 2002 SN 904714 - SN 909476
Ref.
No.
Part
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1005451
1005452
1005453
1005454
3148R1
1005456
1005457
1005458
1005459
1005460
035597
003093
40382
40381
1-2013
Description
Case
Cap
Cover
Bearing Cup #LM67010
Washer
Snap Ring
Cap
Shim .007 x 1.25 I.D.
Gear 68 Degree Cut
Bushing, 18 ga.- NRM
5/16” x 7/8” NC Capscrew w/SEM
Shim .003
Shim .005
Ref.
No.
15
16
17
18
19
20
21
22
23
24
Part
No.
Description
40380
1005464
1005465
1010381
1010382
1005466
837029
003281
1015290
035913
---
Shim .014
Seal
Seal
Shaft Output
Shaft Input
Key 1/4”
Woodruff Key # 809
Woodruff Key # 1210
1/8” NPT Solid Plug
1/4” Plug (NTP Pipe)
PB 1039338 - PB 41
PARTS LIST
Page PB - 42
1-2013
PB 1039338 - PB 42
PARTS LIST
Page PB - 43
LOWER GEARBOX f/ INLET HOPPER
FEBRUARY 15, 2011 SN 938507 to PRESENT
18
Mounted in Main Inlet Hopper
Complete Gearbox - Part No. 1018899-1
Ratio 1:1
Input Shaft - 1 1/4” dia. w/ 1/4” Woodruff Key
Output Shaft - 1 1/4” dia. w/ 14 tooth
splined end
23
8
3
4
5
16
14
7
21
1
2
1
2
10 11 12
17
4
21
13
22
9
24
10 11 12
6
19
Ref.
No.
Part
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
3079R1
3148R1
3028R1
003381
*71-50016
003093
1023527
1023278
1023279
40382
40381
40380
*72-40001
Description
Bearing Cone (LM67048)
Bearing Cup (LM67010)
Grease Zerk (1/8-27)
Retaining Ring
Spacer
Bolt, 5/16-18 x 7/8”
Spacer
Seal (Nat. #471808)
Seal (Nat. #470163)
Shim, .003”
Shim, .005”
Shim, .014”
Key, 1/4” sq. x 1.1” long
1
20
1
2
2
Ref.
No.
Part
No.
Description
14
15
16
17
18
19
20
21
22
23
24
ƒ
1015290
035913
1005472
*70-06055
*70-26028
*70-16023
*71-06036
*72-70007
*70-16021
*71-16064
*71-16065
020009
Vented Plug, 1/8” NPT
Plug, 1/8-27 NPT
Grease Washer
Housing
Bearing Housing
End Cap
Gear, 19 teeth/ DP 6
O-Ring
End Cap
Shaft, Output
Shaft, Input
Plug, 1/4-28 NPT
* Indicates these are Weasler Part No’s.
ƒ Not Shown
Order Weasler Parts at:
P.O. Box 558
West Bend, WI 53095
ph: 262-338-2161
1-2013
15
21
Items 10, 11 & 12 can also be purchased
as a kit, Order Part No. 1023289
0402144
PB 1039338 - PB 43
PARTS LIST
Page PB - 44
LOWER GEARBOX f/ INLET HOPPER
JULY 19, 2002 SN 904714 - FEBRUARY 14, 2011 SN 938482
Part
No.
Ref.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1005451
1005452
1005453
1005454
3148R1
1005456
1005457
1005458
1005459
1005460
035913
003093
40382
40381
1-2013
Description
Case
Cap
Cover
Bearing Cup
Washer
Snap Ring
Cap
Shim .007 x 1.25 I.D.
Gear 68 Degree Cut
1/8” NTP Solid Plug
5/16” x 7/8” NC Capscrew w/SEM
Shim .003
Shim .005
Ref. Part
No. No.
Description
15
16
17
18
19
20
21
*22
Not
Shim .014
Seal
Seal
Shaft Output w/14 Tooth Spline
Shaft Input 1 1/4” Dia.
Key
Washer - Grease
1/4” Plug (NTP Pipe)
40380
1005464
1005465
1005468
1018898
1005466
1005472
1015290
Shown
* NOTE: Not part of the complete assembly.
Order separately.
PB 1039338 - PB 44
PARTS LIST
Page PB - 45
PTO DRIVELINE (MAIN DRIVE)
EXCEPTION SEE NOTE BELOW
1
12
13
4
11
15
2
3
9
Auger End
4
5
6
16
WARNING
WARNING
5
8
14
5
7
Tractor End
10
Maximum Operating Speed, 540 RPM
U-Joint Type - 55R
Auger End, 1 1/2” Bore w/ 3/8” Keyseat
Tractor End, 1 3/8 - 6B Spline
Category 6 - 50° CV
Ref.
No.
--1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Replacement Parts
Repair parts for PTO drivelines can
also be purchased directly from:
P.O. Box 558
West Bend, WI 53095
ph: 262-338-2161
Part
Weasler
No.
Part No.
Description
EXCEPTION NOTE ITEM USE THE WEASLER PART NUMBER FOR
UNITS JUNE 20, 2011 SN 940586 to PRESENT
1015268 PTO Driveline, Complete.................................... 260-21974
UNITS JULY 19, 2002 SN 904714 to JUNE 19, 2011 SN 940586
USE THE BELOW PART NUMBER
1015268
PTO Driveline, Complete.................................... 260-21974
1015319
Joint & Tube Half Assembly ................................... 92-19358
w/ Guard (auger end)
1015320
Inner Guard (includes Item 4) ................................. 96-19358
13-10022 Inner Safety Sign .................................................... 13-10022
1015321
Shield Bearing Retainer ......................................... 19-11106
1015322
U-Joint Cross Repair Kit ......................................... 03-10050
1015323
50° CV Center Housing .......................................... 55251-1599
1015324
End Yoke ................................................................ M-19358C
33170
Setscrew, 3/8-16 x 3/8” .......................................... N/A
1015325
Centralizer .............................................................. 04-14538
1015326
Joint & Tube Half Assembly ................................... 93-19358
w/ Guard (tractor end)
1015327
Safety Slide Lock Repair Kit .................................. 26-15120
1018892
Shear Bolt and Nut Kit ........................................... N/A
1015329
Ball Shear Assembly .............................................. M-19358A
13-10021 Outer Safety Sign ................................................... 13-10021
1015330
Outer Guard (includes Item 4) ................................ 97-19358
1015331
CV Bell Extension .................................................. 36-15133
are Not Lubricated.
Replacement parts must be lubricated at time of assembly. Refer to Lubrication Section for proper procedures.
PB 1039338 - PB 45
1-2013
0402145
PARTS LIST
Page PB - 46
1-2013
PB 1039338 - PB 46
PARTS LIST
Page PB - 47
PTO DRIVELINE f/ SIDE-DRIVE UNIT JULY 19, 2002 SN 904714 to PRESENT
EXCEPTION SEE NOTE BELOW
3
2
10
15
9
13
14
9
11
WARNING
WARNING
16
5
4
1
12
6
8
Tractor End
Maximum Operating Speed, 1000 RPM
U-Joint Type - 35R
Auger End, 1 3/4” Bore w/ 3/8” Keyseat
Tractor End, 1 3/8 - 21 Spline
Ref. Part
No.
No.
1 1021334
2
1014346
3
4
5
6
7
8
9
10
11
12
13
14
15
16
41239
1014348
1014349
1014350
1021335
1021336
1014353
1014348
1021337
1001298
1014356
1014347
1021338
1021355
Description
7
3
Auger End
Repair parts for PTO drivelines can
also be purchased directly from:
G & G Manufacturing Co. Inc.
P.O. Box 12086
Omaha, NE 68112-2086
G&G
Part No.
Snap Hitch Ball Shear Yoke f/ 1000 RPM ............... 495-3521
w/ Shear Bolt
Snap Hitch Repair Kit ............................................. 02010495
w/ Knurled Collar
PTO Repair Kit ........................................................ 302-3500
Yoke f/ Square Shaft ............................................... 177-3500
Square Shaft, 1 3/16” x 26 13/16” ........................... 136-1900
Torque Tubing, 2 1/8” O.D. x 1 7/8” I.D. .................. 140-3500
Inner Plastic Shield ................................................. 30013560
Outer Plastic Shield ................................................ 30003560
Bearing Shield Kit ................................................... 128-1200
Yoke f/ Square Shaft .............................................. 177-3500
Implement Yoke, 1 3/4” round bore ........................ 184N3528
Danger Label, Outside Shield ................................ 30000800
Danger Label, Inside Shield ................................... 30000801
Slip Sleeve w/ Pin Stop .......................................... 194-35PS
Spacer Bearing ....................................................... 129-1400
Shear Bolt and Nut Kit ........................................... N/A
Replacement Parts are Not Lubricated.
Replacement parts must be lubricated at time of assembly.
Refer to Lubrication Section for proper procedures.
NOTE A: Shear Bolt Kit includes (6) 3/8” x 1-1/4” long Grade 2 hex bolts and locknuts
1-2013
0402146
PB 1039338 - PB 47
PARTS LIST
WINCH
(BRAKE TYPE)
3
Repair parts for winch
can also be obtained
directly from:
Fulton Manufacturing Corp.
P.O. Box 19903
Milwaukee, WI 53219
ph: 715-693-1700
4
6
9
25
5
7
9
22
21
1
14
6
11
5
17
26
23
20
13
10
16
Ref.
No.
19
18
24
8
2
7
8
Fulton Model - K1550
Complete Part No. 3335A11
Page PB - 48
10
12
14
15
Hutchinson/
Mayrath Part No.
Description
18
1
Handle Assembly ......................................... 41595
2
3
4
Cable Clamp
Lock Washer & Nut
Carriage Bolt
5
6
7
8
9
Lock Nut, 5/16-18
Ratchet Spacer
Ratchet Spring
Ratchet Pawl
Hex Head Shoulder Bolt, 5/16-18
10
Brake Disc Kit .............................................. 41596
11
12
13
14
15
16
17
Input Shaft
Lock Nut, 1/2-13
Spacer
Bushing
Shaft Brake Disc
Ratchet Gear
Pinion & Disc Assembly
18
19
20
21
22
23
24
25
26
Lock Nut, 1/2-13
*
Drum Assembly
**
Frame
**
Bolt, 1/2-13 x 5 3/4”
*
Drum Spacer
**
Bolt, 3/8-16 x 5 3/4”
*
Frame Spacer
**
Lock Nut, 3/8-16
*
Caution Decal f/ Handle .............................. 2169A1
Fulton
Part No.
2461S01
Cable Keeper Kit
41600
Cable Keeper Kit
5621S01
Ratchet Kit
40836
Ratchet Kit
6730S00
Input Shaft Kit
41597
1558S00
Input Shaft Kit
1563S01
*
**
**
*
**
*
**
*
**
* Indicates standard hardware items, obtain locally.
** These items are not available as separate parts.
1-2013
0402147
PB 1039338 - PB 48
Page PB - 49
PARTS LIST
1-2013
PB 1039338 - PB 49
Hutchinson/Mayrath
A Division of GLOBAL Industries Inc.
Hutchinson/Mayrath P.O. Box 629 Clay Center, KS. 67432
Ph. 785–632–2161 Fx. 785–632–5964 Toll Free 800–523–6993
www.hutchinson-mayrath.com

PARTS BOOK - Hutchinson Mayrath

Transcription

Similar documents

PB1028539 - Hutchinson Mayrath

1 Einführung 1.1 Was ist Morphologie? (1) Глокая куздра штеко