Product Information

the safest method of injection
automatic protection of the
filling set between patients
no crosscontamination
real proven safety · Investigate Radiology – Vol. 47, Number 4
Transflux
TM
The Standard in Contrast Administration
When Safety is important to you...
Transflux™
multi-use contrast administration system
The combination of Transflux™ & Transset™ allows the administration of contrast media via a power injector
without changing the syringes on a “per-patient-basis”.
When used in accordance with manufacturer’s instructions, this procedure
eliminates the risk of cross contamination.
(“Study on Microbial Safety of an Infusion Set for Contrast-Enhanced Imaging” / Investigative Radiology ; Edition 2012)
The disconnect feature provides permanent control over the position of the needle in the vein, allows
checking the blood reflux and offers permanent access to the vein.
By consequence, it helps to avoid extravasations, subcutaneous injections (necrosis).
It offers the possibility to add drugs at any time or in case of emergency.
The system is extremely cost effective, reducing waste,saving time
and consequently increasing patient flow.
The “Transflux™-contrast administration system” consists of two components:
The Transset™
The filling and injecting device that stays permanently connected to the synringes
and is changed once a day.
The Transflux™
The “Patient Line” with check valves and safety zones that is replaced on a per-patient-basis.
Both devices are worldwide patented and trademarked.
in certain jurisdictions based upon PCT/ EP2006/062554, PCT/EP2009/066383 and PCT /
EP2011/062179
References
PR-20 199
Transflux™ CT 20 cm
PR-20 202
Transflux™ CT 120 cm
PR-HP-150
Transflux™ Cardiac HP 150 cm PUR
PR-21 379
Transflux™ CT 45 cm
PR-21 410
Transflux™ CT 150 cm
PR-HP-22501
Transflux™ HP Filling & Injecting set
PR-21 450
Transflux™ CT 45 cm typ GHB
PR-20 203
Transflux™ CT 250 cm
PR-25 210
Transflux™ Perfusion
PR-20 201
Transflux™ CT 60 cm
PR-20 206
Transflux™ CT 150 cm for MRI
PR-20 197
Transset™ Mono Filling & Injecting Set
PR-21 393
Transflux™ CT 100 cm
PR-20 195
Transflux™ CT with Injectionport
PR-20 198
Transset™ Duo Filling & Injecting Set
PR-21 414
Transflux™ CT 100 cm typ GHB
PR-HP-20
Transflux™ Cardiac HP 20 cm PUR
Transflux™
injecting system
· Contamination proof
Investigative Radiology, April 2012 Issue
‘Study of the Microbial Safety of an Infusion Set for Contrast-Enhanced Imaging’
· Two seperate valves · Two safety zones
· By using the disconnect feature
possibility to check position of the needle
avoid extravasations & subcutaneous injections
permanent access to the vein in case of emergency
Transflux
TM
the standard in contrast administration
ONCE A DAY
1
2
Insert Syringes
Connect Transset to injector
3
Connect system to contrast
medium and saline reservoirs
+ flush with saline
Transset
Filling & Injecting set
+ Ensure Contrast and Saline
used are suitable for use
in a multi-use system!
ONCE PER PATIENT
1
2
Hold TransfluxTM upright and flush
Insert needle into vein
or via port-a-cath
3
Connect Transflux TM to needle
PATIENT
PATIENT
push to flush
4
5
Check ‘Blood Reflux’
using disconnect feature
DISCONNECT FEATURE
Reconnect
and check all connections
6
Connect TransfluxTM to Transset™
and injector
PATIENT
PATIENT
System ready for injection!
PATIENT
* in certain jurisdictions based upon PCT / EP2006/062554, PCT / EP2009/066383 and PCT / EP2011/062179
AFTER INJECTION
3+4
PATIENT
1
1
close the clamp
2
disconnect valve
3
leave proximal part of the Transflux™
connected to the Transset™ as a safety cap.
4
remove this part before installing
the new Transflux™ for a new patient
2
for more info please visit www.prmedical.be
© All Rights Reserved P&R Medical 2015
P&R MEDICAL OFFICES · University Hasselt
High Tech Science Park 1/13 · B-3590 Diepenbeek, Belgium
[email protected] · www.prmedical.be
tel: +32(0)11 23 46 81 · fax: +32(0)11 23 46 82
DISTRIBUTED BY
PO Box 17 456
Greenlane
Auckland 1564
New Zealand
www.radiologydu.co.nz
prmedical
WWW.TRANSFLUX.BE
prmed_transflux