dlicatalog - Directed Light

Transcription

Welcome to Directed Light’s Components Catalog!
We appreciate your business!
Directed Light’s sales and service staff has more than 60 years’ combined laser
experience and we’ve been providing the most technically advanced, highest quality laser
components, and the best service in the industry for 20 years. This new catalog
exemplifies our continuing commitment to you, our customer, to provide you with the
parts, technical information, and service you need to run a successful business.
Again, we appreciate your business and hope that you will find this catalog to be one of
the most useful tools on your desk! We welcome your comments and encourage you
let us know how we can be of even greater service to you in your success.
Sincerely,
Jeff Smith
Neil S. Ball
President and COO
Directed Light, Inc.
[email protected]
General Manager
Directed Light, Inc.
[email protected]
Directed Light, Inc. (DLI®) was founded in 1983 with the objective of providing high
quality, cost-effective laser products to the industrial marketplace. Since its
incorporation, Directed Light has experienced steady annual growth by providing an
ever-expanding base of satisfied customers with only the highest level of product
quality and customer service. Today, the company is the nation’s largest distributor
of replacement components for industrial CO2 and Nd:YAG laser systems.
Reputation is directly proportionate to one’s success in the laser components
marketplace. Directed Light, Inc. prides itself on its history of establishing and
maintaining long-term, mutually beneficial relationships with customers and with
component manufacturers. This achievement has proven to be the foundation on
which Directed Light’s solid reputation as the industry source for industrial laser
components has been built. As that source, the company not only stocks an extensive
inventory of critical laser components, but also provides immediate attention and
prompt handling of urgent customer requirements; same day shipments are routinely
accommodated.
Directed Light’s staff is committed to excellence in product quality and customer
satisfaction. The company prides itself on its reputation as first-class providers of
expert technical assistance, flawless customer service and on-time delivery of
premium parts and components.
633 River Oaks Parkway • San Jose, CA 95134 • Tel: (408) 321-8500 • FAX: (408) 321-8466 • Internet: www.directedlight.com
Table of Contents
TABLE OF
CONTENTS
SECTION
PAGE
1 Head Block Drawings..............................................1-25
2 Component Cross Reference Data Sheets ...........26-72
Pulsed Nd:YAG Lasers, by Mfr. by Model No. .................26
Q-Switched Nd:YAG Lasers, by Mfr. by Model No. .........45
CO2 Lasers, by Mfr. by Model No. .................................67
3 Components Listed by Mfr. by Part Number.......73-105
Pulsed Lamps ...............................................................73
CW Lamps ....................................................................75
Lamp Connection Hardware..........................................76
Flow Tubes ...................................................................77
Cavities.........................................................................78
Head Blocks..................................................................79
Nd:YAG Rods.................................................................81
Nd:YAG Lens Protectors ................................................83
Nd:YAG Lenses .............................................................84
Nd:YAG Mirrors .............................................................86
Fiber Optics ..................................................................88
Q-Switches...................................................................88
Filters ...........................................................................89
Cooling Components.....................................................90
Seals & O-Rings............................................................91
Electrical.......................................................................92
Safety Glasses ..............................................................97
Clearview Acrylic & Labels ............................................97
Power Meters & Probes ................................................98
IR & RF Detection..........................................................98
Video Monitors/Cameras ...............................................99
CO2 Lenses.................................................................100
CO2 Lens Protectors....................................................101
CO2 Mirrors.................................................................102
Nozzles.......................................................................105
SECTION
PAGE
4 Technical Data...................................................106-142
Lamps ........................................................................106
Lamp Connection Hardware........................................110
Flow Tubes .................................................................111
Cavities.......................................................................112
Head Blocks................................................................114
Nd:YAG Rods...............................................................115
Nd:YAG Lens Protectors ..............................................119
Nd:YAG Lenses ...........................................................120
Nd:YAG Mirrors ...........................................................122
Q-Switches.................................................................124
Deionization Filters .....................................................127
Particle Filters.............................................................128
Cooling Components...................................................129
Seals & O-Rings..........................................................130
Electrical Components ................................................131
Diagnostic & Safety Equipment ...................................132
CO2 Lenses.................................................................136
CO2 Mirrors.................................................................138
5 Care and Cleaning of Optics .............................143-145
6 Reference ..........................................................146-155
Glossary of Laser Terms..............................................146
Common Formulas for Laser Apps ..............................149
Intensity Distribution ...................................................150
Elliptical Pump Cavity..................................................151
Wavelength Chart .......................................................151
Spot Size vs. Beam Diameter ......................................151
Common Abbreviations/Equivalents/
Conversions .....................................................152-155
Ordering Information
To place an order, contact Directed Light Customer Service at (800) 468-2326.
Pricing and availability information will be provided by our Customer
Service staff.
If the component you require is not listed in the catalog, please contact our
Customer Service department for further assistance. Our experienced support
staff will help you find the components you’re looking for!
1 800 468 2326
408 321 8500
FAX: 408 321 8466
Lasers Supported by Directed LIght
LASERS
SUPPORTED
BY DIRECTED
LIGHT
1 800 468 2326
408 321 8500
FAX: 408 321 8466
AB BAASEL
ALLIED SIGNAL
ALST
AMADA
APOLLO
BIG SKY
BIOLASE
BYSTRONIC
CANDELA
CHICAGO LASER SYSTEMS
CHROMATIX
CILAS
CINCINNATI
COHERENT
CONTINUUM
CONTROL LASER
CONTROL MICRO SYSTEMS
CONVERGENT ENERGY
COOPER LASERSONICS
CRAFFORD PRECISION
CVI LASER
CYNOSURE
ELECTROX/ILM
EL-OP
ESI
EQUILASERS
ESAB
FANUC
FIBERLASE 100
FINN-POWER
FLOROD
FOBA
FOX
FUJI
GENERAL SCANNING
GSI LUMONICS
HACO
HERAEUS SURGICAL
HOBART
HOLOBEAM
JEC LASER
KIGRE
KOIKE ARONSON
KORAD
LASAG
LASER APPLICATIONS
LASER INDUSTRIES
LASER OPTRONICS
LASER PHOTONICS
LASER TECHNIQUES
LASERCUT
LASERLAB
LASERMETRICS
LASERSCOPE
LASERVALL
LEE LASER
LIGHT AGE
LPKF
MATSUSHITA
MAZAK
MBB MEDILASE
MITSUBISHI
MITSUI
MIYACHI
MLS GmbH
MOLECTRON
MUNICH
NEC
NEW WAVE RESEARCH
NIHON
OSRAM
OTARI
PACIFIC LASER
PMI
PM LASER
POSITIVE LIGHT
PRC
PRIMA
PUREPULSE
QUANTEL
QUANTA RAY
QUANTRAD
QUANTRONIX
RAYTHEON
ROFIN SINAR
SCHWARTZ ELECTRO-OPTICS
SHARPLAN
SIEMENS
SLS BIOPHILE
SPACE RAY
SPECTRA PHYSICS
SPECTRON
STRIPPIT
SURGICAL LASER TECHNOLOGIES
SURGILASE
SYLVANIA
SYNRAD
TERADYNE
TOSHIBA
TRIMEDYNE
TRUMPF/HAAS
U.S. LASER
UNITEK MIYACHI
UNIVERSAL
633 River Oaks Parkway • San Jose, CA 95134
1-800-468-2326 • FAX: 408-321-8466
Drawing not provided by OEM. Figures not to scale. For reference only.
AB Baasel 600, 601, 612, 615
Item
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Description
Lamp Baasel/AB 30 Amp
Lamp Baasel/AB 20 Amp
Flow Tube, Lamp and Rod
Flow Tube, Lamp and Rod Cerium Doped
Lamp Block Terminal, Assembly
Lamp Clip, Assembly
Rod Holder w/Cap
Rod 4mm x 79mm
Mounted
Teflon Light Shield
Cavity Endplate Lower
Cavity Endplate Upper
Cavity Ellipse
Cavity Assembly
Head Block Bottom
Head Block Top
Heat Sink
Head Bolt
O-Ring Kit, Silicone
Part No.
LMP-14406
LMP-10495
FLT-10130
FLT-14952
LCH-12522
LCH-11086
ROD-10154
ROD-10143
ROD-10498
CAV-14892
CAV-11830
CAV-11829
CAV-14893
CAV-11816
HBA-11083
HBA-11084
HBA-14894
HDW-14895
ORI-11085
1
2
1-800-468-2326 • FAX: 408-321-8466
AB Baasel 611, 2000, 6000
Item
No. Description
1 Lamp Baasel 20 Amp
Lamp Baasel 30 Amp
2 Flow Tube, Lamp and Rod
3 Lamp Contact Assembly
4 Teflon Light Shield
5 Rod Holder w/Cap
6 Rod Assembly
7 Rod 4mm x 79mm
8 Cavity End Plate Gold
9 Cavity End Plate Teflon
10 Cavity Ellipse
Cavity Assembly
11 Head Block, Bottom
12 Head Block, Top
13 Heat Sink
14 Head Bolt
Part No.
LMP-12704
LMP-13023
FLT-10130
LCH-11870
CAV-14896
ROD-14897
ROD-14898
ROD-10143
CAV-14899
CAV-14900
CAV-14893
CAV-14775
HBA-14901
HBA-14902
HBA-14894
HDW-14895
1-800-468-2326 • FAX: 408-321-8466
Coherent M34/Omega
Item
No. Description
1 Lamp, Krypton, M34
Lamp, Xenon, Omega
2 Flow Tube, Lamp
3 Flow Tube, Rod
4 Rod, YAG, 10mm x 6”
Rod, Assembly
5 Cavity Assembly
6 Cavity Endplate
7 Lamp Connector
8 Lamp Nut
Part No.
LMP-11097
LMP-10782
FLT-10973
FLT-11714
ROD-10407
ROD-13208
CAV-11075
CAV-11076
LCH-11455
LCH-11456
3
4
1-800-468-2326 • FAX: 408-321-8466
Control Laser 258 & 520
Item
No.
–
1
2
3
4
5
6
–
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Description
Gold Cavity Assembly (Complete)
Head Bolt Stainless Steel
Head Bolt Washer, Nylon
Cavity Ellipse, Gold Plated
Rod Flow Tube
Lamp Flow Tube
Krypton Arc Lamp (Standard)
Krypton Arc Lamp (High Pwr)
Cavity End Plate, Right Upper
Light Shield, Right
Light Shield, Left
Locking Knob
Locking Screw, Knob Type
YAG Rod (Crystal Only, 3mm Rod)
TEMoo
YAG Rod Assembly
Rod Guide
Rod Clamp Ring
Dust Shield
Locking Plate
Head Block Bottom
HV Kit
Lamp Terminal Block
Lamp Clip, Gold Plated
Cavity End Plate, Left Upper
Head Block Top
Heat Sink
O-Ring Kit
Head Carriage
Cavity End Plate, Left Lower
Cavity End Plate, Right Lower
Part No.
CAV-10180
HBA-10347
HBA-10280
CAV-10179
FLT-10159
FLT-10132
LMP-10022
LMP-10717
CAV-11110
CAV-10382
CAV-10381
HDW-10353
HDW-10352
ROD-10142
ROD-10619
HBA-11243
HBA-10237
HBA-10358
HBA-10357
HBA-10322
HBA-10728
LCH-10727
LCH-10172
CAV-11107
HBA-10574
HBA-11244
ORI-10163
HBA-11245
CAV-11109
CAV-11108
Control Laser 510 and 512
1-800-468-2326 • FAX: 408-321-8466
Item
No.
–
–
–
1
2
3
4
5
6
7
8
9
10
11
–
12
–
13
14
15
16
17
18
19
20
21
22
–
23
24
25
26
27
28
29
30
31
32
33
Description
Cavity Assembly
O-Ring Kit
HV Connector Kit
Cavity End Plate
Upper Cav Light Shield
Lower Cav Light Shield
Cavity Ellipse
Krypton Arc Lamp
Lamp Flow Tube
Arc Lamp Clip
Lamp Clip Base
Head Dust Shield
Crystal Clamp Ring
Rod Holder and Cap
Rod O-Ring (Not shown)
YAG Rod (Crystal)
YAG Rod Assembly
O-Ring (Rod Seals)
Rod Assembly Guide Tube
Rod Flow Tube
Heat Fin
Head Block Top
Main Head O-Ring
Head Block Bottom
Head Carriage Mount
Locking Plate
Lck Scrw (Allen Type)
Lck Scrw (Knob Type)
Locking Screw Knob
Adapter O-Ring
Strt Thread Adapter
Nylon Screw
Insulating Cap
HV Connector Pin
Steel Set Screw
Insulating Spacer
Insulating O-Ring
Head Bolt
Nylon Washer
Part No.
510
512
CAV-10183 CAV-10181
ORI-10161 ORI-10162
LCH-10140 LCH-10140
CAV-10185 CAV-10185
CAV-10188 CAV-10188
CAV-10189 CAV-10189
CAV-10184 CAV-10182
LMP-10021 LMP-10018
FLT-10128 FLT-10130
LCH-10171 LCH-10171
LCH-10173 LCH-10173
HBA-10358 HBA-10358
HBA-10237 HBA-10237
ROD-10154 ROD-10154
ORI-10153 ORI-10153
ROD-10141 ROD-10143
ROD-10497 ROD-10498
ORI-10318 ORI-10318
HBA-10241 HBA-10241
FLT-10128 FLT-10130
HBA-10348 HBA-10349
HBA-10195 HBA-10197
ORI-10350 ORI-10166
HBA-10196 HBA-10198
HBA-10149 HBA-10150
HBA-10357 HBA-10357
HDW-10351 HDW-10351
HDW-10352 HDW-10352
HDW-10353 HDW-10353
ORI-10354 ORI-10354
FTG-10240 FTG-10240
HDW-10273 HDW-10273
HBA-10355 HBA-10355
LCH-10139 LCH-10139
HDW-10275 HDW-10275
HBA-10356 HBA-10356
ORI-10318 ORI-10318
HBA-10347 HBA-10347
HDW-10280 HDW-10280
5
6
1-800-468-2326 • FAX: 408-321-8466
Control Laser 612 (50-75W)
Script, Elite, Signature, Emblem, & Instamark
Item
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Description
Lamp CLC 612
Flow Tube Lamp CLC
Flow Tube Rod CLC
Rod 4mm x 79mm
Rod 4mm x 79mm Mounted
V-Block, Lamp
Cavity, Light Shield, Lower
Cavity, Light Shield, Upper
Cavity Endplate
Cavity Ellipse
Cavity Assembly
Head Block Bottom
Head Carriage
Head Block Top
Heat Sink
Head Bolt Washer
Head Bolt
Dust Shield
Clamp, Ring Crystal
Carriage Lock Assembly
Space Insulator
HV Connector Pin
Screw Nylon
Fitting Water Head Block
Fitting Water .75” – 16” x .625”
Lamp Lifter
Lamp Clip
Lamp Clamp
Part No.
LMP-11539
FLT-12513
FLT-10130
ROD-10143
ROD-10498
LCH-11216
CAV-10189
CAV-10188
CAV-10185
CAV-10182
CAV-10181
HBA-11463
HBA-14945
HBA-11462
HBA-10349
HDW-14946
HDW-14836
HBA-10538
HBA-10237
HBA-10241
HBA-10357
HBA-10356
LCH-10139
HDW-10273
FTG-14832
FTG-11229
LCH-13784
LCH-10171
LCH-13919
1-800-468-2326 • FAX: 408-321-8466
Control Laser 612 (100 Watt)
Script, Elite, Signature, Emblem, Instamark
Item
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Description
Lamp CLC 100 Watt
Lamp Rod Flow Tube
V-Block
Cavity Ellipse
Cavity Endplate
Upper Cavity Light Shield
Lower Cavity Light Shield
Rod 4mm x 105mm
Mounted
Rod Holder w/Cap
Dust Shield
Crystal Clamp Ring
O-Ring Rod Seals
O-Ring Rod Seal / Insulating O-Ring
Insulating Spacer
HV Connector Pin
Insulating Cap
Nylon Screw
Fitting, Water
Fitting, Water .75” – 16” x .625”
Lower Head Block
Upper Head Block
Heat Sink
Nylon Washer
Head Bolt
Lamp Lifter
Lamp Clip
Lamp Clamp
Part No.
LMP-10598
FLT-10873
LCH-13846
CAV-14829
CAV-10185
CAV-14830
CAV-14831
ROD-11294
ROD-11293
ROD-10154
HBA-10358
HBA-11463
ORI-10318
HBA-10241
ORI-10318
HBA-10356
LCH-10139
HBA-10355
HDW-10273
FTG-14832
FTG-11229
HBA-14833
HBA-14834
HBA-14835
HDW-10280
HDW-14836
LCH-13784
LCH-10171
LCH-13917
7
8
Control Laser 400
1-800-468-2326 • FAX: 408-321-8466
Item
No.
–
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
–
–
27
Description
Cavity Assembly
Head Block Top
Head Block Center
Head Block Bottom
Locking Plate
Locking Screw
Krypton Flashlamp
Lamp Tension Connector
Knob, Mount
Trigger Contact
O-Ring Kit
Lamp Holder Extension
Lamp Holder
Cavity Bottom
Cavity Top
Trigger Insulator
Top Endplate
Carriage, Head
Filter Glass
Bushing, End
Bushing, Support
Bottom Endplate
Mounting Bracket, Cable
Locking Plate
Bushing, Plate, Hold Down
Knob, Insulator
YAG Rod Assembly
Rod, Unmounted
Rod, Rework
Rod Holder with Cap
Part No.
CAV-10174
HBA-10192
HBA-10193
HBA-10194
HBA-10357
HDW-10352
LMP-10013
LCH-10177
HDW-10353
LCH-10398
ORI-10160
LCH-10178
LCH-10176
CAV-10411
CAV-10410
LCH-10283
CAV-10412
HBA-10970
FLT-10134
HBA-10845
HBA-10949
CAV-10413
HDW-10675
HBA-10798
HBA-10847
HBA-10814
ROD-10500
ROD-10146
ROD-10650
ROD-10156
1-800-468-2326 • FAX: 408-321-8466
ESI 3570 Series
Item
No.
–
1
2
3
4
5
6
7
–
8
9
10
11
12
13
14
15
16
17
18
19
20
Description
Cavity Assembly
Endplate, Right, Upper
Ellipse
Endplate, Left, Upper
Endplate, Left, Lower
YAG Rod Assembly
Rod Holder with Cap
YAG Rod (Crystal only)
YAG Rod Assembly
Rod Rework
Gold Lamp Clip
Endplate, Right, Lower
Lamp, Krypton Arc
Flow Tube, Lamp/Rod
Rod Compression Cap
Lamp Terminal Block
HV Connector Pin
Water Fitting
Head Block Top
Head Block Bottom
Rod Guide Tube
O-Ring Kit
Part No.
CAV-10953
CAV-10802
CAV-10813
CAV-10803
CAV-11092
ROD-10499
ROD-10743
ROD-10142
ROD-10499
ROD-10567
LCH-10175
CAV-11093
LMP-10015
FLT-10127
HBA-10943
LCH-10944
HBA-10941
FTG-10940
HBA-10925
HBA-10777
HBA-10942
ORI-10164
9
10
1-800-468-2326 • FAX: 408-321-8466
GSI Lumonics Multiwave 500/1000/2000
Item
No.
1
2
3
Description
Lamp Kr
Rod Flow Tube Samarium
Rod 8mm x 193mm .5mcc Rod Only
Part No.
LMP-11453
FLT-14358
ROD-12869
1-800-468-2326 • FAX: 408-321-8466
GSI Lumonics JK701, 702, 703, 704
Item
No. Description
1 Lamp Kr, (JK701, 702, 703)
Lamp Xe (JK704)
2 Rod, 3/8” x 6”-1/4” (JK701, 704)
Rod, 3/8” x 6”-1/4”, .8mcc (JK701 HCR)
Rod, 1/4” x 6”-1/4” (JK702, 703)
3 Flow Tube, Rod, Samarium (JK701, 704)
Flow Tube, Rod, Samarium (JK702, 703)
Flow Tube, Rod, Pyrex (JK701,704)
Flow Tube, Rod, Pyrex (JK702,703)
Part No.
LMP-10485
LMP-11012
ROD-10722
ROD-14827
ROD-11207
FLT-14032
FLT-14785
FLT-11727
FLT-14956
11
12
1-800-468-2326 • FAX: 408-321-8466
Lasag KLS, 016, 111, 126
LAK 100-101
Item
No. Description
1 Lamp Kr
Lamp Xe
Lamp Xe
2 Flow Tube Lamp
3 Flow Tube Rod
4 Rod, YAG, 1/4” x 3”
5 Cavity, Endplate, Left
6 Cavity, Lower, Lasag
7 Cavity, Endplate, Right
8 Cavity, Upper, Lasag
Part No.
LMP-11022
LMP-11551
LMP-11918
FLT-14936
FLT-14937
ROD-14942
CAV-14938
CAV-14939
CAV-14940
CAV-14941
1-800-468-2326 • FAX: 408-321-8466
Lasag LAK 301-302, LPM 301-302,
KLS 321-322, KLS 312
Item
No. Description
1 Lamp Kr
Lamp Kr
Lamp Kr
Lamp Xe
Lampe Xe (Low Impedance)
2 Flow Tube, Lamp
3 Flow Tube, Rod
4 Rod, YAG 1/4” x 6”
5 Cavity End Plate Left
Cavity End Plate Left
6 Cavity Lower
Cavity Lower
7 Cavity End Plate Right
Cavity End Plate Right
8 Cavity Upper
Cavity Upper
Part No.
LMP-12264
LMP-13053
LMP-13916
LMP-11297
LMP-11674
FLT-14926
FLT-14927
ROD-13894
CAV-14928
CAV-14929
CAV-14930
CAV-14931
CAV-14932
CAV-14933
CAV-14934
CAV-14935
13
14
1-800-468-2326 • FAX: 408-321-8466
Lasag LAK 400-401
Item
No.
1
2
3
4
5
6
7
8
Description
Lamp Kr
Lamp Xe
Lamp Xe (Low Impedance)
Flow Tube, Lamp
Flow Tube, Rod
Rod, YAG 1/4” x 6”
Cavity Lower
Cavity Upper
Cavity Endplate, Left
Cavity Endplate, Right
Part No.
LMP-10812
LMP-11297
LMP-11674
FLT-14920
FLT-14921
ROD-13894
CAV-14922
CAV-14923
CAV-14924
CAV-14925
1-800-468-2326 • FAX: 408-321-8466
Lee Laser 650M
Item
No.
1
2
3
4
5
Description
Lamp
Lamp Contact Band
Flow Tube, Lamp
Rod, 4mm x 82mm
Rod, 4mm x 82mm, Mounted
Flow Tube, Rod
Part No.
LMP-12523
LCH-10177
FLT-14963
ROD-16386
ROD-16304
FLT-14964
15
16
1-800-468-2326 • FAX: 408-321-8466
Lee Laser 708 and 712
Item
No.
–
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Description
Gold Cavity Assembly
Head Bolt
O-Ring Kit
Washer, Nylon
Heat Sink, Head Top
Head Block Top
Cavity End-Plate, Left
Lamp Contact Band
Lamp Flow Tube
Rod Flow Tube
Krypton Lamp
Cavity Ellipse
HV Pin
Lamp Contact Assembly
Lamp Terminal Block
Head Block Bottom
Head Carriage
Carriage Locking Assembly
Water Fitting
YAG Rod (Crystal only,
4mm Rod)
YAG Rod Assembly (4mm Rod)
Rod Guide Tube
Rod Clamp Ring
Dust Shield
Cavity End Plate, Right
Light Shield, Upper
YAG Rod Assembly (3mm Rod)
YAG Rod (Crystal only,
3mm Rod)
Light Shield Lower
Part No.
708
712
CAV-11032 CAV-11031
HBA-10347 HBA-10347
ORI-10167 ORI-10167
HDW-10280 HDW-10280
HBA-11223 HBA-11223
HBA-11029 HBA-11029
CAV-11225 CAV-11225
LCH-10177 LCH-10177
FLT-10450 FLT-10450
FLT-10451 FLT-10451
LMP-10449 LMP-10328
CAV-11226 CAV-11226
HBA-11246 HBA-11246
LCH-10338 LCH-10338
LCH-11227 LCH-11227
HBA-11030 HBA-11030
HBA-11228 HBA-11228
HBA-14846 HBA-14846
FTG-11229 FTG-11229
ROD-10143 ROD-10143
ROD-11317
HBA-11230
HBA-11231
HBA-11232
CAV-11233
CAV-11234
ROD-14908
ROD-10142
ROD-11317
HBA-11230
HBA-11231
HBA-11232
CAV-11233
CAV-11237
ROD-14908
ROD-10142
CAV-11235
CAV-11236
1-800-468-2326 • FAX: 408-321-8466
Lee Laser 715/718
Item
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Description
Lamp
Lamp Flow Tube
Rod Flow Tube
Lamp Contact Band
Washer SS Split
Screw Lamp Mounting Block
Lamp Contact Block
Lamp Terminal Block
Teflon Light Shield, Lower Right
Cavity Endplate, Lower Right
Upper Left
Cavity Endplate, Lower Left
Upper right
Teflon Light Shield Lower Left
Teflon Light Shield Upper right
Teflon Light Shield Upper Left
Cavity Ellipse
HV Pin
Rod 4mm x 108mm
Mounted
Rod Holder w/Cap
Rod Guide
Rod End Cap Lee
Dust Boot Lee
Fitting Head Block Water
Fitting, Water .625” OD
Fitting, Water, Reducer .50” OD
Lower Head Carriage
Lower Head Block
Heat Sink
Head Block Upper
Nylon Washer
SS Washer
Head Block Bolt
Part No.
LMP-11074
FLT-11161
FLT-11162
LCH-10177
HDW-14837
HDW-14838
LCH-10338
LCH-11227
CAV-14839
CAV-11233
CAV-11225
CAV-11235
CAV-11234
CAV-14840
CAV-14841
HBA-11246
ROD-12555
ROD-14224
HBA-14223
HBA-11230
ROD-14842
HBA-14843
FTG-14832
FTG-14844
FTG-14845
HBA-14846
HBA-14847
HBA-14848
HBA-14849
HBA-14850
HDW-14851
HDW-14852
HDW-14853
18
1-800-468-2326 • FAX: 408-321-8466
Lee Laser 808/812
Item
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
Description
Lamp, Lee 20 Amp
Lamp, Lee 30 Amp
Lamp, Flow Tube
Rod, Flow Tube (Doped) Samarium
Lamp, Contact Band
Washer, SS Split
Lamp, Contact Block Right
Lamp, Terminal Block Right
Lamp, Contact Block Left
Lamp, Terminal Block Left
HV Pin Lee
Teflon Light Shield, Lower, Left
Cavity Endplate, Lower, Left
Cavity Ellipse
Cavity Endplate, Lower, Right
Teflon Light Shield, Lower Right
Cavity Endplate, Upper, Right
Teflon Light Shield, Upper, Right
Cavity Endplate, Upper, Left
Teflon Light Shield, Upper, Left
Dust Boot
Rod End Cap, Lee
Rod Guide, Short, Lee
Rod Hardware
Rod 4mm x 79mm
Mounted
Fitting, Water Head Block .625”
Fitting, Water, Reducer
Fitting, Water .625” OD SS
Lower Head Carriage
Head Block, Bottom, Lower
Rod Guide, Long
Heat Sink
Head Block, Top
Nylon Washer, Head
SS Washer, Head
Head Bolt, SS
Part No.
LMP-10449
LMP-10328
FLT-10450
FLT-14854
LCH-10177
HDW-14838
HDW-14837
LCH-14855
LCH-14856
LCH-14857
LCH-14858
HBA-14859
CAV-14860
CAV-14861
CAV-11226
CAV-14862
CAV-11235
CAV-14863
CAV-11234
CAV-14864
CAV-14865
HBA-14866
ROD-14842
HBA-14867
ROD-11316
ROD-10143
ROD-11317
FTG-14832
FTG-14845
FTG-14844
HBA-14846
HBA-14868
HBA-14869
HBA-14870
HBA-14871
HBA-14872
HDW-14851
HDW-14852
HDW-14853
1-800-468-2326 • FAX: 408-321-8466
Lee Laser 815/818/825
Item
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
Description
Lamp Lee
Lamp Flow Tube Lee 4.4”
Rod Flow Tube Samarium Doped
Lamp Contact Band
Lamp Terminal Block Right
Lamp Contact Block Right
Washer SS Split
Lamp Mounting Block Screw
HV Pin
Lamp Contact Block Left
Lamp Terminal Block Left
Cavity Ellipse Lee
Cavity Endplate Lower, Right
Teflon Light Shield, Lower, Right
Cavity Endplate, Upper, Left
Dust Boot
Rod End Cap
Rod Guide
Rod Holder w/Cap
Rod 4mm x 108mm
Mounted
Fitting, Water Head Block
Fitting, Water Reducer .50” OD
Fitting, Water .625” OD. SS
Lower Head Carriage
Lower Head Block
Heat Sink
Head Block Upper
Nylon Washer
Washer SS
Head Bolt
Part No.
LMP-11074
FLT-11161
FLT-14873
LCH-10177
LCH-14874
LCH-14875
HDW-14837
HDW-14838
LCH-14876
LCH-14877
LCH-14878
CAV-14879
CAV-14880
CAV-14841
CAV-14881
CAV-11235
CAV-14882
CAV-11234
CAV-14883
CAV-14884
HBA-14885
HBA-14886
HBA-14887
ROD-14223
ROD-12555
ROD-14224
FTG-14832
FTG-14845
FTG-14844
HBA-14846
HBA-14888
HBA-14889
HBA-14890
HBA-14891
HDW-14851
HDW-14852
HDW-14853
19
20
1-800-468-2326 • FAX: 408-321-8466
Quantrad/Lasermetrics 9555
Item
No.
–
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Description
Head Bolt
Washer, Nylon
Head Block, Top
Heat Sink
Cavity End Plate, Left
Cavity Ellipse
Rod Flow Tube
Lamp Flow Tube
Krypton Lamp
Lamp Clip
Lamp Terminal Block
YAG Rod Assembly
O-Ring Kit
Rod Guide Tube
Crystal Clamp Ring
Dust Boot
Water Fitting
Head Block, Bottom
Head Carriage
HV Pin
Part No.
CAV-10823
HBA-10347
HDW-10280
HBA-11250
HBA-11251
CAV-11252
CAV-11253
CAV-11026
FLT-10712
FLT-10711
LMP-10696
LCH-10175
LCH-11255
ROD-10978
ROD-10935
ORI-11263
HBA-11256
HBA-11257
HBA-11258
HDW-10245
FIG-11259
HBA-11027
HBA-11261
HBA-11262
1-800-468-2326 • FAX: 408-321-8466
Quantronix 114 and 116
Item
No.
–
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
–
23
24
25
26
27
Description
Cavity Assembly
Reflector Top
Reflector Bottom
Reflector Ellipse
Adapter
Cavity Endplate
Water Inlet Block
Light Shield
Head O-Ring
Head Block Bottom
O-Ring Kit
Crystal Pressure Plate
Lamp Pressure Plate
Lamp End Plate
Head Block Top
Water Fitting
YAG Rod Assembly
YAG Rod Assembly, Rework
YAG Rod, Unmounted
Rod Flow Tube Kit
Rod Flow Tube
Lamp Flow Tube
Arc Lamp, Standard
Arc Lamp, Long Life
Anode Socket
Cathode Socket
Threaded Retainer
Pressure Washer
Seal Ring
Part No.
114
116
CAV-10960
CAV-10965
CAV-10961
CAV-10966
CAV-10962
CAV-10967
CAV-10932
CAV-10930
HBA-10899
HBA-10899
CAV-10929
CAV-10929
HBA-11057
HBA-11009
HBA-11053
HBA-11054
ORI-10418
ORI-10418
HBA-10897
HBA-10897
ORI-10605
ORI-10605
HBA-11056
HBA-11056
HBA-11052
HBA-11052
HBA-11051
HBA-11051
HBA-10898
HBA-10898
FTG-11055
FTG-11055
ROD-10934
ROD-10670
ROD-10616
ROD-10616
ROD-10144
ROD-10143
ROD-10959
ROD-10669
FLT-10963
FLT-10933
FLT-10137
FLT-10137
LMP-10017
LMP-10023
LMP-11117
LMP-11000
LCH-10486
LCH-10486
LCH-10487
LCH-10631
LCH-10507
LCH-10507
LCH-10508
LCH-10508
ORI-10509
ORI-10509
21
22
1-800-468-2326 • FAX: 408-321-8466
Quantronix 117 and 118
Item
No.
–
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
–
23
24
25
26
27
Description
Cavity Assembly
Reflector Top
Reflector Bottom
Reflector Ellipse
Adapter
Cavity Endplate
Water Inlet Block
Light Shield
Head O-Ring
Head Block Bottom
O-Ring Kit
Lamp Pressure Plate
Lamp End Plate
Head Block Top
Water Fitting
YAG Rod Assembly
YAG Rod Assembly, Rework
YAG Rod, Unmounted
Rod Flow Tube Kit
Rod Flow Tube
Lamp Flow Tube
Arc Lamp, Standard
Arc Lamp, Long Life
Anode Socket
Cathode Socket
Threaded Retainer
Pressure Washer
Seal Ring
Part No.
117
118
CAV-11333 CAV-11345
CAV-11334 CAV-11346
CAV-11335 CAV-11347
CAV-11336 CAV-11247
HBA-10899 HBA-10899
CAV-10929 CAV-11348
HBA-11337
––
HBA-11338 HBA-11350
ORI-11339
ORI-11351
HBA-11340 HBA-11340
ORI-11341
ORI-11353
HBA-11056 HBA-11056
HBA-11052 HBA-11052
HBA-11051 HBA-11051
HBA-11342 HBA-11342
FTG-11055 FTG-11055
ROD-11343 ROD-11343
ROD-10938 ROD-10938
ROD-11344 ROD-11330
ROD-11200 ROD-11153
FLT-11199
FLT-11355
FLT-11104
FLT-11154
LMP-10147 LMP-11125
LMP-11326 LMP-11126
LCH-10486 LCH-10486
LCH-10631 LCH-10631
LCH-10507 LCH-10507
LCH-10508 LCH-10508
ORI-10509
ORI-10509
* Standard Model 117 YAG rod is 6.3mm diameter. 3mm and 4mm
dia rods, 0-rings and flow tube hardware available upon request.
1-800-468-2326 • FAX: 408-321-8466
Raytheon 500 Series
Item
No.
1
2
3
4
5
–
6
7
8
9
10
Description
Flashlamp
Lamp Flow Tube
Lamp Insulator Kit
Rod Flow Tube
YAG Rod
YAG Rod Assembly
Cavity Reflector Set
Cavity End Plate Set
O-Ring Kit
Cavity Gasket Set
Lamp Connector Set
Part No.
LMP-10010
FLT-10136
LCH-10133
FLT-10125
ROD-10408
ROD-10679
CAV-10187
CAV-10186
ORI-11132
ORI-10321
LCH-10399
23
24
1-800-468-2326 • FAX: 408-321-8466
Raytheon 525/531/550 Series
Item
No.
1
2
3
4
5
6
7
8
–
9
10
11
12
13
14
15
16
Description
Flashlamp
Lamp Flow Tube
Lamp Connector, HV
Lamp Connector, GND
Lamp Insulator Block
Cavity Reflector Set
Cavity End Plates
YAG Rod Assembly
Rod Flow Tube
O-Ring Kit
Cavity Gasket Set
Lamp, End Plate
Block, Flow Tube, Rear
Block, Flow Tube, Front
Lamp Nut
Cavity Housing, Lower
Part No.
LMP-10010
FLT-10135
LCH-11123
LCH-11124
LCH-11215
CAV-10187
CAV-10186
ROD-10408
ROD-10679
FLT-10125
ORI-11131
ORI-10321
LCH-11220
LCH-11512
LCH-11511
LCH-11356
CAV-12420
1-800-468-2326 • FAX: 408-321-8466
Trumpf/Haas HL703-HL4006
Item
No.
1
2
3
4
5
6
Description
Lamp
Flow Tube, Lamp
Flow Tube, Rod (HL700-HL1500)
Rod (HL700-1500)
Rod (HL2000-4000)
Cavity Assembly
Cavity R/E
Lamp O-Ring
Part No.
LMP-16300
FLT-16266
FLT-16267
FLT-16268
Contact DLI
ROD-16273
CAV-16693
CAV-16336
ORI-14812
25
Component Cross-Reference Datasheets
PULSED
Nd:YAG
COHERENT
M34/OMEGA
COHERENT M34/OMEGA
Description
OEM P/N
DLI P/N
513-002-01
contact DLI for p/n
LMP-11097
LMP-10782
513-051-00
513-511-00
n/a
n/a
n/a
LCH-10991
LCH-10992
LCH-10177
LCH-11455
LCH-11456
513-052-00
513-492-00
FLT-10973
FLT-11714
n/a
n/a
n/a
513-010-00
513-016-00
n/a
n/a
ROD-10407
ROD-13208
ROD-12265
LCH-14529
LCH-14528
ROD-10650
ROD-10979
n/a
513-050-00
n/a
513-040-02
513-040-01
CAV-11075
CAV-11076
CAV-10633
CAV-10971
CAV-10972
513-536-00
513-537-00
513-753-00
contact DLI for p/n
YMR-10404
YMR-10405
YMR-11018
YMR-10841
513-512-00
513-512-01
YFL-10920
YFL-10921
2603-0082
2603-0084
WFI-10784
WFI-10808
n/a
ORI-11466
Lamps
Lamp, Krypton, M34
Lamp, Xenon, Omega
Lamp Connection Hardware
Lamp Terminal Block
Lamp Terminal Assembly
Lamp Connector
Lamp Connector Nut
Flow Tubes
Flow Tube, Lamp
Flow Tube, Rod
Rods & Related Hardware
Rod, YAG Crystal
Rod Assembly, Mounted
Kit, Holder, Rod
Retaining Nut, Flow Tube, Rod
Spacer, Flow Tube, Rod
Rod, Rework
Rod, Rework/Remount
Cavities & Related Components
Cavity Assembly
Cavity Endplate Set
Cavity Replate
Cavity Top Reflector Replate
Cavity Bottom Reflector Replate
Mirrors
Front Mirror, 30% reflectivity
Rear Mirror, 100% reflectivity
Beamsplitter, 3%
Rear Mirror, with Power Meter
Focusing Lenses
Focusing Lens, Upcoll., Input
Focusing Lens, Upcoll., Output
Cooling Components
Deionization Filter
Particle Filter
Seals & O-Rings
O-Ring Kit
1 800 468 2326
408 321 8500
FAX: 408 321 8466
26
CONTROL CLC 400
Description
OEM P/N
DLI P/N
195222
LMP-10013
155960
184333
168583
184549
179119
060335
LCH-10282
LCH-10176
LCH-10398
LCH-10283
LCH-10178
LCH-10177
187724
FLT-10134
n/a
040766
186551
188060
186551 & 188060
n/a
ROD-10146
ROD-10500
ROD-10800
ROD-10801
ROD-10156
ROD-10650
040865
184481
184457
185199
188086
n/a
n/a
009290
009308
009316
185272
188052
188045
184382
n/a
n/a
n/a
n/a
n/a
n/a
CAV-10174
CAV-10410
CAV-10411
CAV-10412
CAV-10413
CAV-11023
CAV-11465
HBA-10192
HBA-10193
HBA-10194
HBA-10970
HBA-10949
HBA-10845
HBA-10814
HBA-10357
HDW-10352
HDW-10353
HDW-10675
HBA-10798
HBA-10847
090209
090225
039354
039347
039271
038935
YMR-10070
YMR-10071
YMR-10090
YMR-10406
YMR-10078
YMR-10076
089763
089789
089227
089193
n/a
YFL-10083
YFL-10085
YFL-10098
YFL-10327
YFL-11050
CONTROL CLC 400
Lamps
Lamp, Krypton Arc
PULSED
Nd:YAG
Lamp Connector, HV
Lamp Holder
Lamp Trigger Contact
Lamp Insulator
Lamp Holder Ext.
Flow Plates
Filter Glass Flow Plate
Rod, 3/8” x 4.5”, Unmounted
Rod, 3/8” x 4.5”, Mounted
Rod Holder
Rod Cap
Rod Holder and Cap
Rod, Rework
Cavity Assembly
Cavity Ellipse, Top
Cavity Ellipse, Bottom
Cavity Endplate, Top
Cavity Endplate, Bottom
Cavity Assembly Replate
Cavity, R/E
Head Block Top
Head Block Center
Head Block Bottom
Carriage, Head
Bushing, Support
Bushing, End
Knob, Insulator
Locking Plate
Locking Screw
Knob, Mount
Mounting Bracket, Cable
Locking Plate
Bushing Plate, Hold Down
Mirrors
Rear Mirror, 100%R
Front Mirror, 35%R
Rear Mirror, Fold Cavity
Front Mirror, Fold Cavity
Dichroic Mirror, 3” diameter
Dichroic Mirror, 1.5” diameter
Focusing Lenses
Focusing Lens, 4” FL, 1.1” diameter
Focusing Lens, 6” FL, 1.1” diameter
Focusing Lens, Upcoll. 2X, Input
Focusing Lens, Upcoll. 2X, Output
Lens, Upcollimator, 2X
1 800 468 2326
408 321 8500
FAX: 408 321 8466
27
PULSED
Nd:YAG
CONTROL CLC 400 (Continued)
Description
CONTROL CLC 400
Electrical Components
Capacitor, 4MFD, 3KV
Capacitor, 1000MFD, 450V
Board, TTL I/O
SCR, MR1396
SCR, PBR100
SCR, 301UR160
SCR, 250RA170
Flow Switch, Proteus
Transformer, 115V
Transformer, DPC-34-125
Transformer, Pulse
Transformer, Simmer
OEM P/N
DLI P/N
055103
056150
051623
064832
150144
n/a
n/a
145011
150243
114298
115352
114876
ELC-11088
ELC-10690
ELC-10783
ELC-10861
ELC-10311
ELC-10860
ELC-10862
ELC-10604
ELC-10918
ELC-10528
ELC-10828
ELC-10701
072835
200477
072827
072991
148569
093724
093732
093440
WFI-10115
WFI-10116
WFI-10124
WFI-10325
H20-10416
H20-10199
H20-10200
H20-10201
036665
181800
ORI-10160
ORI-10155
Cooling Components
Deionization Filter
Particle Filter
Combo Filter, Current Style
Combo Filter, Old Style
Pump, 3 Phase, 1 HP
Pump, Gasket, Pump Boot
Pump, Impeller
Pump, Seal and Set
Seals & O-Rings
O-Ring Kit
O-Ring, Rod, Teflon
GSI LUMONICS JK701
GSI LUMONICS JK701
Description
OEM P/N
DLI P/N
P55B6770B
LMP-10485
M73R7100K
12240010A
FLT-14032
FLT-11727
12250220A
12250760A
n/a
n/a
ROD-10722
ROD-14827
ROD-11670
ROD-10650
12220110A
12220020A
P62B6270A
P62B6280A
834217-002
834217-001
834216-001
YMR-11719
YMR-11718
YMR-11788
YMR-16379
YMR-14966
YMR-11471
YMR-11662
834314-008
834314-009
834314-015/1231011YA
834314-016
contact DLI for p/n
YFL-11792 or YFL-12776
YFL-14712
YFL-11770
Lamps
Lamp, JK701 (Krypton)
Flow Tubes
Flow Tube, Rod, Samarium
Flow Tube, Rod, Pyrex
Rod, JK701, 3/8” x 6-1/4”, Unmounted
Rod, JK701, 3/8” x 6-1/4”, .8Mcc, HCR
Rod, JK701, Repair/Exchange
Rod, Rework
Mirrors
Output Mirror
Rear Mirror
#1 Bend Mirror
#2 Bend Mirror
Dichroic Mirror, 3” dia. x .375” thick, w/AU ctg
Dichroic Mirror, 2” dia. x .250” thick
Dichroic Mirror, .750’ dia. x .375” thick (right angle)
1 800 468 2326
408 321 8500
FAX: 408 321 8466
28
Focusing Lenses
Focusing Lens, 3.0” FL, 1.0” dia.
Focusing Lens, 5.0” FL, 1.0” dia. (125mm)
Focusing Lens, 10” FL, 1.0” dia. (250mm)
GSI LUMONICS JK701 (Continued)
Description
OEM P/N
DLI P/N
834316-001
123412201
12210140A
123412301
LPR-13954
LPR-14816
LPR-12728
LPR-13808
M7357060X
550000101
480000611/E64ZK380K
n/a
n/a
n/a
WFI-10746
WFI-10745
H20-11172
H20-11169
H20-11170
H20-11171
Pump, O-Ring
O-Ring, Head
n/a
16NB26600
ORI-11173
ORI-11764
GSI LUMONICS JK702
Description
OEM P/N
DLI P/N
P55B6770B
LMP-10485
12240750A
12240300A
FLT-14785
FLT-14956
12250430A
n/a
ROD-11207
ROD-10683
12220110A
12220020A
P62B6270A
P62B6280A
P62B6280A
834217-002
834217-001
834216-001
YMR-11719
YMR-11718
YMR-11788
YMR-16379
YMR-14464
YMR-14966
YMR-11471
YMR-11662
834314-008
834314-009
834314-015/1231011YA
834314-016
contact DLI for p/n
YFL-11792 or YFL-12776
YFL-14712
YFL-11770
834316-001
123412201
834316-002
12210140A
123412301
LPR-13954
LPR-14816
LPR-13955
LPR-12728
LPR-13808
GSI LUMONICS JK701
Lens Protectors
Lens Protector, 28.5mm dia., 1mm thick, uncoated
Lens Protector, 38mm dia., 1mm thick, uncoated
Lens Protector, 46mm dia., 1mm thick, coated
Lens Protector, 54mm dia., 1mm thick, uncoated w/tab
PULSED
Nd:YAG
Cooling Components
Deionization Resin
Particle Filter
Pump Assembly
Pump Impeller
Pump Volute
Pump Shaft Seal Kit
Seals & O-Rings
GSI LUMONICS JK702
Lamps
Flow Tubes
Flow Tube, Samarium, Rod
Rod, JK702, 1/4” x 6-1/4”, Rework
Mirrors
Output Mirror
Rear Mirror
#1 Bend Mirror
#2 Bend Mirror
Mirror, Bend, JK #2, 702H
Dichroic Mirror, 3” dia. x .375” thick, w/AU ctg.
Focusing Lenses
Focusing Lens, 10” FL, 1.0” dia.r (250mm)
Lens Protectors
1 800 468 2326
408 321 8500
FAX: 408 321 8466
29
PULSED
Nd:YAG
GSI LUMONICS JK702 (Continued)
Description
GSI LUMONICS JK702
Cooling Components
Deionization Resin
Particle Filter
Pump Assembly
Pump Impeller
Pump Volute
Pump Shaft Seal Kit
OEM P/N
DLI P/N
M7357060X
550000101
480000611/E64ZK380K
n/a
n/a
n/a
WFI-10746
WFI-10745
H20-11172
H20-11169
H20-11170
H20-11171
n/a
16NB26600
ORI-11173
ORI-11764
Seals & O-Rings
Pump, O-Ring
O-Ring, Head
GSI LUMONICS JK703
GSI LUMONICS JK703
Description
OEM P/N
DLI P/N
P55B6770B
LMP-10485
12240750A
12240300A
FLT-14785
FLT-14956
12250430A
n/a
ROD-11207
ROD-10683
12220110A
12220020A
P62B6270A
P62B6280A
834217-002
834217-001
834216-001
YMR-11719
YMR-11718
YMR-11788
YMR-16379
YMR-14966
YMR-11471
YMR-11662
Lamps
Flow Tubes
Flow Tube, Samarium, Rod
Rod, JK703, 1/4” x 6-1/4”, Rework
Mirrors
Output Mirror
Rear Mirror
#1 Bend Mirror
#2 Bend Mirror
Focusing Lenses
834314-008
contact DLI for p/n
834314-009
YFL-11792 or YFL-12776
834314-015/1231011YA
YFL-14712
834314-016
YFL-11770
Lens Protectors
834316-001
123412201
834316-002
12210140A
123412301
LPR-13954
LPR-14816
LPR-13955
LPR-12728
LPR-13808
M7357060X
550000101
480000611/E64ZK380K
n/a
n/a
n/a
WFI-10746
WFI-10745
H20-11172
H20-11169
H20-11170
H20-11171
n/a
ORI-11173
Cooling Components
Deionization Resin
Particle Filter
Pump Assembly
Pump Impeller
Pump Volute
Pump Shaft Seal Kit
1 800 468 2326
408 321 8500
FAX: 408 321 8466
30
Seals & O-Rings
Pump, O-Ring
GSI LUMONICS JK704
Description
OEM P/N
DLI P/N
GSI LUMONICS JK704
Lamps
Lamp, JK704 (Xenon)
PULSED
Nd:YAG
P55F3830B
LMP-11012
M73R7100K
12240010A
FLT-14032
FLT-11727
12250220A
n/a
n/a
ROD-10722
ROD-11670
ROD-10650
12230020A
12220020A
P62B6270A
P62B6280A
834217-002
834217-001
834216-001
YMR-11720
YMR-11718
YMR-11788
YMR-16379
YMR-14966
YMR-11471
YMR-11662
Flow Tubes
Flow Tube, Rod, Samarium
Rod, JK704, 3/8” x 6-1/4”, Repair/Exchange
Rod, JK704, 3/8” x 6-1/4”, Rework
Mirrors
Output Mirror
Rear Mirror
#1 Bend Mirror
#2 Bend Mirror
Focusing Lenses
834314-008
contact DLI for p/n
834314-009
YFL-11792 or YFL-12776
834314-015/1231011YA
YFL-14712
834314-016
YFL-11770
Lens Protectors
834316-001
123412201
834316-002
12210140A
123412301
LPR-13954
LPR-14816
LPR-13955
LPR-12728
LPR-13808
M7357060X
550000101
480000611/E64ZK380K
n/a
n/a
n/a
WFI-10746
WFI-10745
H20-11172
H20-11169
H20-11170
H20-11171
n/a
16NB26600
ORI-11173
ORI-11764
Cooling Components
Deionization Resin
Particle Filter
Pump Assembly
Pump Impeller
Pump Volute
Pump Shaft Seal Kit
Seals & O-Rings
O-Ring, Pump
O-Ring, Head
1 800 468 2326
408 321 8500
FAX: 408 321 8466
31
CW/PULSED
Nd:YAG
GSI LUMONICS
MULTIWAVE
GSI LUMONICS MULTIWAVE
Description
OEM P/N
DLI P/N
P55V4830B
LMP-11453
12240770A
FLT-14358
122511OYA/1225116YA
n/a
n/a
ROD-12869
ROD-12870
ROD-10650
1222070YA
P68W2430X
YMR-13792
YMR-14196
Lamps
Lamp, Multiwave
Flow Tubes
Flow Tube, Rod, 8mm, Lumo Multiwave
Rod, 8mm x 193mm, .5Mcc
Rod, Repair/Exchange
Rod, Rework
Mirrors
Mirror, Assembly., Turning Lumonics
Window, Assembly, Lumonics
Focusing Lenses
Focusing Lens, 80mm FL, 28mm dia., Singlet, Mounted
Focusing Lens, 85mm FL, 28mm dia., Doublet, Mounted
834314-008
contact DLI for p/n
834314-009
YFL-11792 or YFL-12776
834314-015/1231011YA
YFL-14712
834314-016
YFL-11770
P59R6180X
YFL-13790
P59Y939OX
YFL-13791
Lens Protectors
Lens Protector, 54mm dia., 1mm thick, V-coat
P59R313OX
834316-001
123412201
834316-002
12210140A
123412301
1234123YA
LPR-13918
LPR-13954
LPR-14816
LPR-13955
LPR-12728
LPR-13808
LPR-14808
M7357060X
550000101
WFI-10746
WFI-10745
16CE00000
M61W6461A
ORI-16384
ORI-16383
OEM P/N
DLI P/N
3750-0007-00
LMP-11857
A110-0004-01
A110-0004-02
LCH-16348
LCH-16349
B110-0009-01
B110-0006-01
FLT-16346
FLT-16345
A110-0002-00
A110-0002-00REF
ROD-16339
ROD-10683
Cooling Components
Filter, Resin, DI
Filter, Particle
Seals & O-Rings
O-Ring, Flow Tube, Rod
O-Ring, Rod, Baked
CW/PULSED
Nd:YAG
GSI LUMONICS/
HOBART
HLP750-HLP3000
GSI LUMONICS/HOBART HLP750-HLP3000
Description
Lamps
Lamp, Hobart, 3KW
Anode, Holder, Lamp
Cathode, Holder, Lamp
Flow Tubes
Flow Tube, Lamp
Flow Tube, Rod
1 800 468 2326
408 321 8500
FAX: 408 321 8466
32
Rod, YAG, 6.35mm x 210mm
Rod Rework
GSI LUMONICS/HOBART HLP750-HLP3000 (Continued)
Description
OEM P/N
DLI P/N
B110-0004-00
B110-0002-00
N/A
N/A
CAV-16352
CAV-16353
CAV-16354
CAV-16355
3710-0005-00
B830-0011-00
B830-0002-00
B830-0010-00
B830-0001-00
YMR-16340
YMR-16356
YMR-16357
YMR-16358
YMR-16341
B820-0010-00
B810-0008-00
B810-0003-00
B810-0005-00
B810-0004-00
B810-0007-00
B820-0006-00
B810-0006-00
YFL-16342
YFL-16360
YFL-16344
YFL-16361
YFL-16343
YFL-16359
YFL-10112
YFL-14712
(New) B810-0010-00
(Old)B810-0009-00
B820-0017-00
LPR-16347
Cavity, Ellipse
Cavity, Endplate
Cavity Replate, Ellipse
Cavity, Replate, Endplate
CW/PULSED
Nd:YAG
GSI LUMONICS/
HOBART
HLP750-HLP3000
Mirrors
Mirror, Rear, .5"dia, .250"
Mirror, Front, .750"dia, .250", 70%R, HLP750
Focusing Lenses
Lens, -150mm FL, 50.8mm dia, FS, PL/CC
Lens, 50.2mm FL, 25.4mm dia, FS, PL/CX
Lens, 100mm FL, 25.4mm dia, FS, PL/CX
Lens, 100mm FL, 2.0"dia, FS, PL/CX
Lens, 200mm FL, 25.4mm dia, FS, PL/CX
Lens Protectors
Window, 1.0"dia, .062", V-coat
Window,2.0"dia, 2mm, V-coat
GSI LUMONICS LUXSTAR
Description
LPR-11281
OEM P/N
DLI P/N
P61R4980X
P61Y6980X
LMP-11421
LMP-12560
Lamps
Lamp (Standard), Luxstar
Lamp (Low Power), Luxstar
PULSED
Nd:YAG
GSI LUMONICS
LUXSTAR
Focusing Lenses
834314-008
contact DLI for p/n
834314-009
YFL-11792 or YFL-12776
834314-015/1231011YA
YFL-14712
834314-016
YFL-11770
Lens Protectors
Lens Protector, 24mm dia., 1mm, uncoated w/hold
Lens Protector, 54mm dia., 1mm thick, V-coat
P59R3130X
834316-001
123412201
834316-002
12210140A
123412301
1234123YA
LPR-13918
LPR-13954
LPR-14816
LPR-13955
LPR-12728
LPR-13808
LPR-14808
55X17750P
WFI-11796
Cooling Components
Deionization Filter
1 800 468 2326
408 321 8500
FAX: 408 321 8466
33
CW/PULSED
Nd:YAG
TRUMPF/HAAS
HL703-HL4006
TRUMPF/HAAS HL703-HL4006
Description
OEM P/N
DLI P/N
Lamp
759082
LMP-16300
Flow Tubes
Flow Tube, Lamp
759119
774188
759133
FLT-16266
FLT-16267
FLT-16268
759312
759313
n/a
Contact DLI
ROD-16273
Contact DLI
761338
761338
n/a
CAV-16693
CAV-16336
CAV-16316
778560
778560
778560
781488
781488
781488
YFL-14750
YFL-14751
YFL-14752
YFL-14753
YFL-14754
YFL-14755
759720
770976/777936
LPR-14795
LPR-14756
n/a
WFI-14711
n/a
n/a
Contact DLI
Contact DLI
Lamps
YAG Rod, (HL700-HL1500)
YAG Rod, (HL2000-HL4000)
Rod Rework
Cavities & Related Hardware
Cavity Assembly
Cavity R/E
Cavity Replate
Focusing Lenses
Lens, Focus, 27mm dia, 5.1mm AT, Haas #1 (part of YFL-14752 Assembly)
Lens, Focus, 27mm dia, 2.05mm AT, Haas #2 (part of YFL-14752 Assembly)
Lens, Focus, Assembly, 70mm FL, Haas #1
Lens, Collimator, Haas #1 (part of YFL-14755 Assembly)
Lens, Collimator, Haas #2 (part of YFL-14755 Assembly)
Lens, Collimator, Assembly, Mono, Haas
Lens Protectors
Lens Protector, 55mm dia, V-Ctd
Lens Protector, 22.4mm dia, V-Ctd
Cooling Components
Filter, Resin, DI, Refill
Beam Delivery
New Fibers
Rework Fibers
PULSED
Nd:YAG
LASAG, KLS016, 111,
126 LAK 100-101
1 800 468 2326
408 321 8500
FAX: 408 321 8466
34
LASAG KLS016, 111, 126 LAK 100-101
Description
OEM P/N
DLI P/N
64.0323
64.0371
64.0579
LMP-11022
LMP-11551
LMP-11918
Flow Tubes
Flow Tube, Lamp
Flow Tube, Rod
n/a
n/a
FLT-14936
FLT-14937
Rod, 1/4” x 3”
Rod, 1/4” x 6”
Rod, Rework
n/a
n/a
n/a
ROD-14942
ROD-13894
ROD-10683
n/a
n/a
n/a
n/a
n/a
CAV-14939
CAV-14941
CAV-14938
CAV-14940
44.0007
44.0008
n/a
n/a
Lamps
Lamp, Krypton
Lamp, Xenon
Lamp,Xenon
Cavities & Head Blocks
Cavity, Lower
Cavity, Upper
Cavity, Endplate, Left
Cavity, Endplate, Right
Cavity, Replate, KLS126
Mirrors
Output Mirror
Rear Mirror
LASAG KLS016, 111, 126 LAK 100-101 (Continued)
Description
Lens Protectors
Lens Protector, 25mm dia. x 4mm thick, v-coat
Lens Protector, 30mm dia. x 2mm thick
Cooling Components
DI Resin, 128 oz.
Nozzles
Nozzle, Nylon
Nozzle, Graphite
OEM P/N
DLI P/N
64.0498
64.0176
LPR-12791
LPR-11757
n/a
WFI-11522
41.7417
10.0015
BMD-12857
BMD-12858
LASAG LAK 301-302, KLS 321-322, FLS 342, LAK 400-401
Lamps
Lamp, Krypton
Lamp, Krypton
Lamp, Krypton
Lamp, Krypton
Lamp, Xenon
Lamp, Xenon, Low Impedance
64.0324
64.0551
64.0153
64.0552
64.0372
64.0372
LMP-10812
LMP-12264
LMP-13053
LMP-13916
LMP-11297
LMP-11674
Flow Tubes
Flow Tube, Lamp, 301-302, 312, 321-322,
Flow Tube, Lamp, LAK400-401
Flow Tube, Rod, 301-302, 312, 321-322,
Flow Tube, Rod, LAK400-401
n/a
n/a
n/a
n/a
FLT-14926
FLT-14920
FLT-14927
FLT-14921
Rod, 1/4” x 6”
Rod, Rework
n/a
n/a
ROD-13894
ROD-10683
Cavity, Lower, 301-302, 321
Cavity, Lower, 312, 322
Cavity, Lower, LAK400-401
Cavity, Upper, 301-302, 321
Cavity, Upper,312, 322
Cavity, Upper, LAK400-401
Cavity, Endplate, Left, 301-302, 321
Cavity, Endplate, Left, 312, 322
Cavity, Endplate, Left, LAK400-401
Cavity, Endplate, Right, 301-302, 321
Cavity, Endplate, Right, 312, 322
Cavity, Endplate, Right, LAK400-401
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
CAV-14930
CAV-14931
CAV-14922
CAV-14934
CAV-14935
CAV-14923
CAV-14928
CAV-14929
CAV-14924
CAV-14932
CAV-14933
CAV-14925
64.0176
64.0498
LPR-11757
LPR-12791
n/a
WFI-11522
41.7417
10.0015
BMD-12857
BMD-12858
64.0324
64.0551
64.0153
64.0552
64.0372
64.0372
LMP-10812
LMP-12264
LMP-13053
LMP-13916
LMP-11297
LMP-11674
Lens Protectors
Lens Protector, 30mm dia. x 2mm thick, uncoated
Lens Protector, 25mm dia. x 4mm thick, v-coated
Cooling Components
DI Resin, 128 oz.
Nozzles
Nozzle, Nylon
Nozzles, Graphite
Lamps
Lamp, Krypton
Lamp, Krypton
Lamp, Krypton
Lamp, Krypton
Lamp, Xenon
Lamp, Xenon, Low Impedance
PULSED
Nd:YAG
LASAG
KLS016, 111, 126
LAK100-101
LASAG
LAK 301-302
KLS 321-322
FLS 342
LAK 400-401
1 800 468 2326
408 321 8500
FAX: 408 321 8466
35
PULSED
Nd:YAG
LASAG
LAK 301-302
KLS 321-322
FLS 342
LAK 400-401
LASAG LAK 301-302, KLS 321-322, FLS 342, LAK 400-401 (Continued)
Description
OEM P/N
Flow Tubes
Flow Tube, Lamp, 301-302, 312, 321-322,
Flow Tube, Lamp, LAK400-401
Flow Tube, Rod, 301-302, 312, 321-322,
Flow Tube, Rod, LAK400-401
n/a
n/a
n/a
n/a
FLT-14926
FLT-14920
FLT-14927
FLT-14921
Rod, 1/4” x 6”
Rod, Rework
n/a
n/a
ROD-13894
ROD-10683
Cavity, Lower, 301-302, 321
Cavity, Lower, 312, 322
Cavity, Lower, LAK400-401
Cavity, Upper, 301-302, 321
Cavity, Upper,312, 322
Cavity, Upper, LAK400-401
Cavity, Endplate, Left, 301-302, 321
Cavity, Endplate, Left, 312, 322
Cavity, Endplate, Left, LAK400-401
Cavity, Endplate, Right, 301-302, 321
Cavity, Endplate, Right, 312, 322
Cavity, Endplate, Right, LAK400-401
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
CAV-14930
CAV-14931
CAV-14922
CAV-14934
CAV-14935
CAV-14923
CAV-14928
CAV-14929
CAV-14924
CAV-14932
CAV-14933
CAV-14925
64.0176
64.0498
LPR-11757
LPR-12791
n/a
WFI-11522
41.7417
10.0015
BMD-12857
BMD-12858
OEM P/N
DLI P/N
64.0308
64.0309
LMP-10809
LMP-11357
Rod, 3/8” x 6”
Rod, Rework
n/a
n/a
ROD-10577
ROD-10650
Lens Protectors
30mm dia. x 2mm, uncoated
25mm dia. x 4mm, v-coated
64.0176
64.0498
LPR-11757
LPR-12791
n/a
WFI-11522
41.7417
10.0015
BMD-12857
BMD-12858
Lens Protectors
Lens Protector, 30mm dia. x 2mm thick, uncoated
Lens Protector, 25mm dia. x 4mm thick, v-coated
Cooling Components
DI Resin, 128 oz.
Nozzles
Nozzle, Nylon
Nozzles, Graphite
LASAG
LAK 501-502
KLS 521-522
LPM 501-502
LASAG LAK 501-502, KLS 521-522, LPM 501-502
Description
Lamps
Lamp, Krypton
Lamp, Xenon
Cooling Components
DI Resin, 128 oz.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
36
DLI P/N
Nozzles
Nozzle, Nylon
Nozzle, Graphite
LASAG LAK 101, KLS 016, KOS 102 (MEDICAL)
Description
OEM P/N
DLI P/N
Lamps
Lamp, Krypton
Lamp, Krypton
64.0302
KOS-102
LMP-10980
LMP-13246
LEE LASER 650M
Description
OEM P/N
DLI P/N
LKF-650
LMP-12523
12000011
LCH-10177
F3411QL2
F3412SM
FLT-14963
FLT-14964
n/a
YR4650
n/a
n/a
ROD-16386
ROD-16304
ROD-12328
ROD-12329
12000008
12000007
YMR-10075
YMR-10070
Deionization Water Filter
12000032
WFI-11122
RAYTHEON SS500, SS525, SS531, SS550
Description
OEM P/N
DLI P/N
ESL 64248 P1
LMP-10010
ESL 64963
n/a
ESL 65935 P1
ESL 65935 P2
G116347
G113737
ESL 64765
ESL 65932
n/a
n/a
LCH-10133
LCH-10399
LCH-11123
LCH-11124
LCH-11215
LCH-11220
LCH-11533
LCH-11356
LCH-11511
LCH-11512
ESL 64793
ESL 65933
G113049 G2
FLT-10136
FLT-10135
FLT-10125
LRN72 P1
n/a
n/a
n/a
LRN65 P3
ROD-10408
ROD-10650
ROD-10678
ROD-10570
ROD-10679
LASAG
LAK 101, KLS 016
KOS 102 (MEDICAL)
LEE LASER 650M
Lamps
Lamp, Lee 650M
PULSED
Nd:YAG
Lamp Contact Band
Flow Tubes
Flow Tube, Lamp
Flow Tube, Rod
Rod, 4mm x 82mm, Unmounted
Holder, 4mm Rod (w/cap), Short
Holder, 4mm Rod (w/cap), Long
Mirrors
Front Mirror
Rear Mirror
Cooling Components
Lamps
Lamp, Mdl. 500, 525, 531, 550
RAYTHEON
SS500, SS525,
SS531, SS550
Lamp Insulator Kit, Mdl. (SS500)
Lamp Connector Set, Mdl. (SS500)
Lamp Connector Set, HV, Mdl. (SS550)
Lamp Connector, GND, Mdl. (SS550)
Lamp Insulator Block, Mdl. (SS550)
Lamp End Plate (SS550)
Lamp Wire Set (SS500)
Lamp Nut (SS550)
Block Flow Tube, Front, Ray SS550
Block Flow Tube, Rear, Ray SS550
Flow Tubes
Flow Tube, Mdl. (SS500)
Flow Tube, Mdl. (SS525, 531, 550)
Rod Flow Tube
Rod, Coated YAG Rod
Rod, Rework
Rod, Rework and Remount
Rod, YAG Assembly, R/E
Rod Assembly, New
1 800 468 2326
408 321 8500
FAX: 408 321 8466
37
PULSED
Nd:YAG
RAYTHEON
SS500, SS525,
SS531, SS550
RAYTHEON SS500, SS525, SS531, SS550 (Continued)
Description
OEM P/N
DLI P/N
G116731 (upper)
G116730 PTD
n/a
n/a
n/a
CAV-10187
CAV-10186
CAV-10600
CAV-10632
CAV-12420
ESL 64288
n/a
ESL 64863
675-3359
n/a
ESL 64512 PTD
G113173
YMR-10076
YMR-10077
YMR-10072
YMR-10069
YMR-10572
YMR-11752
YMR-11531
ESL 64510 P2
ESL 64510 P6
ESL 64510 P3
ESL 64510 P3
n/a
ESL 64510 P4
ESL 64510 P8
ESL 64510 P1
YFL-10081
YFL-10082
YFL-10083
YFL-14787
YFL-10084
YFL-10085
YFL-10086
YFL-10087
n/a
n/a
n/a
G113285 P1
n/a
n/a
LPR-10099
LPR-10100
LPR-10101
LPR-10102
LPR-10103
LPR-10104
G112428
36-DX
2N5207
C147PB
S4215OTS
RS42150TS
1N1190
1N311R
LM311H
n/a
C391PN
6839
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
ELC-10299
ELC-10386
ELC-10286
ELC-16284
ELC-10289
ELC-11248
ELC-10285
ELC-10287
ELC-10297
ELC-10419
ELC-10420
ELC-10222
ELC-11418
ELC-10483
ELC-10476
ELC-10477
ELC-10478
ELC-10479
ELC-10480
ELC-10481
ELC-10482
ELC-10636
Gold Cavity Assembly Reflector Set
Gold Cavity End Plates
Cavity Repair/Exchange
Cavity Repair and Repolish
Cavity Housing Lower, Ray SS 550
Mirrors
Dichroic Mirror, 1.5” dia., .125” thick
Dichroic Mirror, 2.0” dia., .394” thick
Front Mirror, Mdl., 500, 525, 531, 550
Rear Mirror, Mdl. 500, 525, 531, 550
Neutral Density Filter Kit
Shutter Mirror, Gold (SS500)
Shutter Dump Mirror, Gold (SS550)
Focusing Lenses
Focusing Lens, 1.1”, 2.0”, FL
Focusing Lens, 1.1”, 4.0”, FL, BI/CX
Focusing Lens, 1.1”, 4.0”, FL, PL/CX
Focusing Lens, 1.1”, 2.5”, FL Neg
Lens Protectors
Lens Protectors, 1.1”
Lens Protectors, 1.1”, Coated
1 800 468 2326
408 321 8500
FAX: 408 321 8466
38
PFN Capacitor
Reservoir Capacitor
Charging SCR (SS500)
Charging SCR (SS550)
Fanning Diode
Fanning Diode
Diode
Zenner Diode
Op Amp
HV Contactor
Charge/Discharge SCR
Light Bulbs, Power Supply Status
Transformer, Trigger, DPC-180-24, RAY550
IC Kit
IC AL 301
IC AL 311
IC AL 342
IC AL 347
IC AL 374
IC AL 390
IC AL 321
IC AL 322
RAYTHEON SS500, SS525, SS531, SS550 (Continued)
Description
OEM P/N
DLI P/N
n/a
n/a
n/a
G113027
G120264
ESL51833
G120049G2
G121000G4
G121028G1
n/a
n/a
ESL14775
129713-030
129733-029
n/a
n/a
ELC-10503
ELC-11402
ELC-11133
ELC-12429
ELC-14906
ELC-11790
ELC-11790
ELC-12809
ELC-16321
ELC-16319
ELC-11765
ELC-11810
PNE-10279
PNE-11739
ELC-16365
TST-14909
MRX-1
U2OA1OU
0661-2
HP75-75-3
310239
WFI-10118
WFI-10120
H20-11021
H20-10415
H20-11532
O-Ring Kit (SS500)
O-Ring Kit (SS550)
O-Ring, Lamp, Silicone
Cavity Gasket Set, .030” thick
Cavity Gasket Set, .060” thick
n/a
n/a
n/a
ESL 66125
n/a
ORI-11132
ORI-11131
ORI-10168
ORI-10321
ORI-14219
ROFIN SINAR PY 500
Description
OEM P/N
DLI P/N
710-774/710.799
LMP-11193
Electrical Components (Continued)
Potentiometer, PFN, RAYSS550
Potentiometer, PFN, RAYSS500
Potentiometer, Pulse Rate, Raytheon
Shutter Blade (SS550)
Bd, 3 Phase, SCR, Controller, Raytheon (SS550)
Bd, P.C. Switch Indicator (SS500)
Bd, P.C. Switch Indicator (SS550)
Bd, Lamp Simmer Dual Logic (SS550)
Bd, Shutter Logic, (SS550)
Switch, Magnetic, Proximity
Diode, HVC60, Raytheon
Bd, Lamp Trigger Head, Raytheon SS550
Shutter Solenoid (SS500)
Shutter Solenoid (SS550)
Resistor, 20 Mg OHM
Power Meter, Raytheon
PULSED
Nd:YAG
RAYTHEON
SS500, SS525,
SS531, SS550
Cooling Components
Deionization Filter
Particle Filter
Pump Rebuild Kit
Pump, .75 HP, 3 Phase
Heat Exchanger
Seals & O-Rings
Lamps
Lamp, PY500
Flow Tubes
Flow Tube
131-450
FLT-11358
n/a
403771
ROD-10650
ROD-10577
n/a
CAV-11360
507-001901
YFL-11325
402-283
WFI-11299
PULSED
Nd:YAG
ROFIN SINAR
PY 500
Rod, Rework, Unmounted
Rod, 3/8” x 6”
Cavity Rework (set of four)
Focusing Lenses
Focusing Lens, 50mm dia. x 120mm
Cooling Components
Particle Filter
1 800 468 2326
408 321 8500
FAX: 408 321 8466
39
PULSED
Nd:YAG
UNITEK MIYACHI
LW10, LW15
UNITEK MIYACHI LW10 & LW15
Description
OEM P/N
DLI P/N
435-189
LMP-13813
4-60009-01
LCH-12554
4-35229-01
FLT-13011
MLU-0689-04
MLU-0689-02
ROD-13978
ROD-13024
CM-0029
CM-0068
4-60045-01
4-60046-01
4-60047-01
8-662-01
452-100
452-058
452-054
452-050
452-038
452-032
452-024
YMR-13096
YMR-13097
YMR-13082
YMR-13083
YMR-13085
YMR-14965
YMR-13086
YMR-13142
YMR-13143
YMR-13144
YMR-13145
YMR-13137
YMR-13138
475-088
4-60032-01
4-60033-01
4-60090-01
4-60252-01
YFL-13157
YFL-12785
YFL-13147
YFL-12782
YFL-13891
475-087
475-107
475-108
LPR-13081
LPR-14981
LPR-14982
318-009
MLF-0007
330-001
330-078
ELC-12998
ELC-13039
ELC-12999
ELC-13002
318-024
WFI-13162
318-023
MLF-0006
451-082
TMC-50B
WFI-13422
WFI-13038
HDW-13099
H20-13100
570-155
570-157
570-151
570-153
570-153
ORI-13031
ORI-13032
ORI-13028
ORI-13029
ORI-13015
Lamps
Lamp, Flashlamp. LW10, LW15
Lamp, Holder, W/O Clips
Flow Tubes
Flow Plate, Laser, LW10, LW15
Rod, LW10, 6.35mm x 87mm
Rod, LW15, 8mm x 87mm
Mirrors
Front Mirror, LW10, LW15
Rear Mirror, LW10, LW15
Beam Attenuator, 8% Uncoated, LW10, LW15
Beam Attenuator, 4% Coated, One Side, LW10, LW15
Beam Attenuator, 2% Coated, Both Sides, LW10, LW15
Attenuator Kit includes 2 ea. 8%, 4%, 2%
Beamsplitter, 100%, LW10, LW15
Focusing Lenses
Focusing Lens, 70mm FL, 30mm dia., Gradium, PL/CX HP
Focusing Lens, 70mm FL, 30mm dia., PL/CX, BK7
Focusing Lens, 100mm FL, 30mm dia.
Lens Protectors
Lens Protector, 30mm dia., 1mm, Uncoated
Lens Protector, 50mm dia., 1mm, Coated
Fan Filter Assembly, LW10, LW15
Filter, Air, Laser, LW10, LW15
Fuse (1A-250V), LW10, LW15
Fuse (3AG, 10A 400V), LW10, LW15
Cooling Components
Deionization Cartridge Kit, LW10, LW15
(WFI13162 includes ion exchange resin pack and cartridge)
Ion Exchange Resin
Water Filter Cartridge, LW10, LW15
Filter Wrench, LW10, LW15
Water Pump
Seals & O-Rings
1 800 468 2326
408 321 8500
FAX: 408 321 8466
40
O-Ring, 12mm ID, LW10, LW15
O-Ring, 4.25”, LW10, LW15
O-Ring, Silicon Rubber, LW10, LW15
UNITEK MIYACHI LW50A, LW70A
Description
OEM P/N
DLI P/N
Lamps
Lamp, Flashlamp, with clips, LW50A, LW70A
435-196
LMP-13052
Z-00640-001
Z-00640-002
FLT-14990
FLT-14991
MLU-0689-10
MLU-0689-09
ROD-14992
ROD-14993
Z-00653-003
Z-00625-008
Z-00625-007
HBA-14987
CAV-14988
CAV-14989
4-60045-01
4-60046-01
4-60047-01
452-100
452-058
452-054
452-050
452-038
452-032
452-024
YMR-13082
YMR-13083
YMR-13085
YMR-13086
YMR-13142
YMR-13143
YMR-13144
YMR-13145
YMR-13137
YMR-13138
475-088
4-60032-01
4-60033-01
4-60090-01
4-60252-01
YFL-13157
YFL-12785
YFL-13147
YFL-12782
YFL-13891
475-087
475-107
475-108
LPR-13081
LPR-14981
LPR-14982
WG-42
ORI-14994
PULSED
Nd:YAG
UNITEK MIYACHI
LW50A, LW70A
Flow Tubes
Flow Tube, Lamp, LW50A, LW70A
Flow Tube, Rod, LW50A, LW70A
Rod, LW50A, 7mm x 127mm
Rod, LW70A, 8mm x 127mm
Acrylic Top Assembly
Flow Tube Upper Holder, Left
Flow Tube Upper Holder, Right
Mirrors
Beam Attenuator, 8% Uncoated, LW50A, LW70A
Beam Attenuator, 4% Coated, One Side, LW50A, LW70A
Beam Attenuator, 2% Coated, Both Sides, LW50A, LW70A
Beamsplitter, 100%
Beamsplitter, 58%
Beamsplitter, 54%
Beamsplitter, 50%
Beamsplitter, 38%
Beamsplitter, 32%
Beamsplitter, 24%
Focusing Lenses
Focusing Lens, 70mm FL, 30mm dia., Gradium, PL/CX
Lens Protectors
Seals & O-Rings
O-Ring, Head, LW50A-70A
1 800 468 2326
408 321 8500
FAX: 408 321 8466
41
PULSED
Nd:YAG
UNITEK MIYACHI
LW51, LW52, LW100
UNITEK MIYACHI LW51, LW52 & LW100
Description
OEM P/N
DLI P/N
4-60200-01
LMP-11643
4-60009-01
LCH-12554
4-35086-01
4-35087-01
FLT-12553
FLT-13009
MLU-0689-01
MLU-0689-03
ROD-13979
ROD-11940
CM-0029
CM-0068
4-60045-01
4-60046-01
4-60047-01
452-100
452-058
452-054
452-050
452-038
452-032
452-024
YMR-13111
YMR-13097
YMR-13082
YMR-13083
YMR-13085
YMR-13086
YMR-13142
YMR-13143
YMR-13144
YMR-13145
YMR-13137
YMR-13138
475-088
4-60032-01
4-60033-01
4-60090-01
4-60252-01
YFL-13157
YFL-12785
YFL-13147
YFL-12782
YFL-13891
475-087
475-107
475-108
LPR-13081
LPR-14981
LPR-14982
330-077
330-044
330-083
ELC-13001
ELC-13000
ELC-13003
318-027
WFI-12793
318-026
4-60081-01
WFI-13422
WFI-12794
4-60017-01
570-154
4-60018-01
4-60019-01
ORI-13012
ORI-13030
ORI-13013
ORI-13014
Lamps
Lamp, Flashlamp, with Clips, LW51, LW52, LW100
Lamp, Holder, W/O Clips
Flow Tubes
Flow Tube, Lamp, LW51, LW52, LW100
Flow Tube, Rod, LW51, LW52, LW100
Rod, LW51, LW52, 8mm x 112mm
Mirrors
Front Mirror, LW51, LW52, LW100
Rear Mirror, LW51, LW52, LW100
Beam Attenuator, 8% Uncoated, LW51, LW52, LW100
Beam Attenuator, 4% Coated, One Side, LW51, LW52, LW100
Beam Attenuator, 2% Coated, Both Sides, LW51, LW52, LW100
Beamsplitter, 100%
Beamsplitter, 58%
Beamsplitter, 54%
Beamsplitter, 50%
Beamsplitter, 38%
Beamsplitter, 32%
Beamsplitter, 24%
Focusing Lenses
Lens Protectors
Fuse (20AMP, 660V), LW51, LW52
Fuse (6AMP, 250V, 3A), LW51, LW52, LW100
Fuse (3AMP, 250V, 3A), LW51, LW52, LW100
Cooling Components
Filter Cartridge Kit, LW
LW51, LW52, LW100
(WFI-12793 includes ion exchange resin pack and cartridge)
Ion Exchange Resin Pack
Particle Filter, LW51, LW52, LW100
Seals & O-Rings
1 800 468 2326
408 321 8500
FAX: 408 321 8466
42
O-Ring, 7mm, ID, LW51, LW52
O-Ring, 9mm ID, LW100
O-Ring, 12.5mm ID, LW51, LW52, LW100
O-Ring, Silicon Rubber, LW51, LW52, LW100
UNITEK MIYACHI LW250 & LW300
Description
OEM P/N
DLI P/N
435-138
LMP-12098
4-60302-01
4-60302-01
FLT-12552
FLT-13023
MLU-0689-05
MLU-0689-06
ROD-13022
ROD-13020
contact DLI for p/n
CM-0048
4-60045-01
4-60046-01
4-60047-01
452-100
452-058
452-054
452-050
452-038
452-032
452-024
YMR-13126
YMR-13127
YMR-13082
YMR-13083
YMR-13085
YMR-13086
YMR-13142
YMR-13143
YMR-13144
YMR-13145
YMR-13137
YMR-13138
475-088
4-60032-01
4-60033-01
4-60090-01
4-60252-01
YFL-13157
YFL-12785
YFL-13147
YFL-12782
YFL-13891
475-087
475-107
475-108
LPR-13081
LPR-14981
LPR-14982
330-085
330-103
330-104
330-044
330-083
ELC-13005
ELC-13006
ELC-13007
ELC-13000
ELC-13003
318-027
WFI-12793
318-026
4-60081-01
contact DLI for p/n
WFI-13422
WFI-12794
H20-13130
570-153
570-154
570-162
570-164
570-163
4-60017-01
ORI-13015
ORI-13030
ORI-13033
ORI-13035
ORI-13034
ORI-13012
Lamps
Lamp, Flashlamp, LW250, LW300
PULSED
Nd:YAG
UNITEK MIYACHI
LW250, LW300
Flow Tubes
Flow Tube, Lamp, LW250, LW300
Flow Tube, Rod, LW250, LW300
Mirrors
Front Mirror, LW250, LW300
Rear Mirror, LW250, LW300
Beam Attenuator, 8% Uncoated, LW250, LW300
Beam Attenuator, 4% Coated, One Side, LW250, LW300
Beam Attenuator, 2% Coated, Both Sides, LW250, LW300
Focusing Lenses
Lens Protectors
Fuse (1AMP, 250V, 5A), LW250, LW300
Fuse, LW250, LW300
Fuse, LW250, LW300
Fuse (6AMP, 250V, 3A), LW250, LW300
Fuse (3AMP, 250V, 3A), LW250, LW300
Cooling Components
Deionization Kit, LW51, LW52, LW100, LW250, LW300
(WFI-12793 includes ion exchange resin pack and cartridge)
Ion Exchange Resin Pack
Particle Filter, LW250, LW300
Water Pump
Seals & O-Rings
O-Ring, Silicon Rubber, LW250, LW300
O-Ring, G250, LW250, LW300
O-Ring, G60, LW250, LW300
1 800 468 2326
408 321 8500
FAX: 408 321 8466
43
PULSED
Nd:YAG
UNITEK MIYACHI
LW400
UNITEK MIYACHI LW400
Description
OEM P/N
DLI P/N
435-138
LMP-12098
A4-04957
A4-05995
FLT-14997
FLT-14998
MLU-0689-07
ROD-14999
A3-01809
A3-02518
HBA-14995
CAV-14996
4-60045-01
4-60046-01
4-60047-01
452-100
452-058
452-054
452-050
452-038
452-032
452-024
YMR-13082
YMR-13083
YMR-13085
YMR-13086
YMR-13142
YMR-13143
YMR-13144
YMR-13145
YMR-13137
YMR-13138
475-088
4-60032-01
4-60033-01
4-60090-01
4-60252-01
YFL-13157
YFL-12785
YFL-13147
YFL-12782
YFL-13891
475-087
475-107
475-108
LPR-13081
LPR-14981
LPR-14982
G260-4-050
ORI-16256
Lamps
Lamp, Flashlamp, LW400
Flow Tubes
Flow Tube, Lamp, LW400
Flow Tube, Rod, LW400
Acrylic Top Assembly
Flow Tube Holder
Mirrors
Beam Attenuator, 8% Uncoated, LW400
Beam Attenuator, 4% Coated, One Side, LW400
Beam Attenuator, 2% Coated, Both Sides, LW400
Beamsplitter, 100%, LW400
Focusing Lenses
Lens Protectors
Seals & O-Rings
O-Ring, Head,LW400
1 800 468 2326
408 321 8500
FAX: 408 321 8466
44
AB BAASEL 600, 601, 612, 615
Description
OEM P/N
DLI P/N
Lamps
Lamp, 30 Amp
Lamp, 20 Amp
Lamp, Straight Connector
Lamp, 100 watt
n/a
n/a
52781
08920
LMP-14406
LMP-10495
LMP-11288
LMP-11139
08420B
n/a
LCH-12522
LCH-11086
n/a
n/a
FLT-10130
FLT-14952
n/a
n/a
n/a
n/a
ROD-10154
ROD-10143
ROD-10498
ROD-10567
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
CAV-14892
CAV-11830
CAV-11829
CAV-14893
CAV-11816
HBA-11083
HBA-11084
HBA-14894
HDW-14895
08530
08520
09540B
09540A
08520A
08540
YMR-10074
YMR-10075
YMR-10080
YMR-10447
YMR-10689
YMR-10070
08610
QSW-10329
n/a
08840
n/a
08850
08830
n/a
n/a
n/a
n/a
n/a
WFI-11184
WFI-10115
WFI-10376
WFI-10116
WFI-11856
H20-11163
H20-11165
H20-11166
H20-11164
H20-11167
08170
ORI-11085
H20-11168
Q-SWITCHED
Nd:YAG
AB BAASEL
600, 601, 612, 615
Lamp Terminal Block, Assembly
Lamp Clip, Assembly
Flow Tubes
Flow Tube, Lamp/Rod
Flow Tube, Lamp/Rod, Cerium Doped
Rod Holder and Cap
Rod, 4mm x 79mm
Rod Reworked
Teflon Light, Shield
Cavity Endplate, Lower
Cavity Endplate, Upper
Cavity Ellipse
Cavity Assembly
Head Block, Bottom
Head Block, Top
Heat Sink
Head Bolt
Mirrors
Output Mirror, 80%R, Flat
Output Mirror, 90%R, Flat
Output Mirror, 90%R, 1 Mcc
Output Mirror, 80%R, 1 Mcc
Output Mirror, YAG/Green, 1 Mcc
Rear Mirror, 100%R, Flat
Q-Switches
Q-Switch, 27 Mhz
Cooling Components
Deionization Filter
Deionization Filter
Particle Filter
Particle Filter
Combo Filter DI/Particle
Pump, Impeller
Pump, Seal set
Pump, Motor
Pump, Volute
Pump, Water Assembly
Seals & O-Rings
O-Ring, Pump, Seal
1 800 468 2326
408 321 8500
FAX: 408 321 8466
45
Q-SWITCHED
Nd:YAG
AB BAASEL
611, 2000, 6000
AB BAASEL 611, 2000, 6000
Description
OEM P/N
DLI P/N
54024
08331
52781
08920
LMP-12704
LMP-13023
LMP-11288
LMP-11139
08420
LCH-11870
08610
n/a
FLT-10130
FLT-14952
n/a
08310
n/a
n/a
ROD-14897
ROD-14898
ROD-10143
ROD-10567
n/a
n/a
n/a
n/a
601-09311
n/a
n/a
n/a
n/a
CAV-14896
CAV-14899
CAV-14900
CAV-14893
CAV-14775
HBA-14901
HBA-14902
HBA-14894
HDW-14895
08520A
08540
YMR-10689
YMR-10070
08610
QSW-10329
n/a
08840
n/a
08850
08830
WFI-11184
WFI-10115
WFI-10376
WFI-10116
WFI-11856
08170
ORI-11085
Lamps
Lamp, 2000/6000, 20 Amp
Lamp, 2000/6000, 30 Amp
Lamp, Straight Connector
Lamp, 100 Watt
Flow Tubes
Flow Tube, Lamp/Rod
Flow Tube, Lamp/Rod, Cerium Doped
Rod Holder and Cap, Baasel 2000/6000
Rod Assembly, Baasel 2000/6000
Rod, 4mm x 79mm
Rod Rework
Teflon Light Shield Baasel 2000/6000
Cavity Endplate, Gold, Baasel
Cavity Endplate, Teflon, Baasel
Cavity Ellipse, Baasel
Cavity, Assembly 2000/6000
Head Block, Bottom, Baasel 2000/6000
Head Block, Top, Baasel 2000/6000
Heat Sink, Baasel
Head Bolt, Baasel
Mirrors
Output Mirror, YAG/Green, 1 Mcc
Rear Mirror, 100%R, Flat
Q-Switches
Q-Switch, 27 Mhz
Cooling Components
Deionization Filter
Deionization Filter
Particle Filter
Particle Filter
Combo Filter DI/Particle
Seals & O-Rings
1 800 468 2326
408 321 8500
FAX: 408 321 8466
46
CONTROL CLC 258, 520
Description
OEM P/N
DLI P/N
Lamps
Lamp, Krypton Arc, Standard
Lamp, Krypton Arc, High Power
195198
195230
LMP-10022
LMP-10717
188577
188524
LCH-10172
LCH-10727
032581
188631
FLT-10159
FLT-10132
n/a
036459
n/a
ROD-10142
ROD-10619
ROD-10567
040311
012955
013003
012989
029066
029058
013003
012989
171629
016717
n/a
n/a
n/a
n/a
052548
171629
079129
028522
027862
028928
023242
CAV-10180
CAV-10179
CAV-11110
CAV-11107
CAV-10382
CAV-10381
CAV-11109
CAV-11108
HBA-10322
HBA-10574
HBA-10728
HBA-11244
HBA-11245
HBA-11243
HBA-10347
HBA-10280
HBA-10353
HBA-10352
HBA-10237
HBA-10358
HBA-10357
090290
090274
090209
YMR-10075
YMR-10074
YMR-10070
201319
QSW-10028
072835
200477
0935000
093724
093732
069054
WFI-10115
WFI-10116
H20-10415
H20-10199
H20-10200
H20-10210
174722
ORI-10163
Q-SWITCHED
Nd:YAG
CONTROL
CLC 258, 520
Lamp Clip
Lamp Terminal Block
Flow Tubes
Flow Tube, Rod
Flow Tube, Lamp
Rod Rework, 3mm
Cavity Assembly
Cavity Ellipse
Cavity End Plate, Right Upper
Cavity End Plate, Left Upper
Light Shield, Right
Light Shield, Left
Cavity End Plate, Left Lower
Cavity End Plate, Right Lower
Head Block, Bottom Block
Head Block, Top Block
HV Kit
Heat Sink
Carriage
Head Block, Rod Guide Tube
Head Bolt, Stainless Steel
Head Bolt Washer, Nylon
Locking Knob
Locking Screw, Knob Type
Rod Clamp Ring
Dust Shield
Locking Plate
Mirrors
Front Mirror, 90%R
Front Mirror, 80%R
Rear Mirror, 100%R
Q-Switches
Q-Switch, 24 MHz, 70 Watt
Cooling Components
Deionization Filter
Particle Filter
Pump, 3 Phase, 3/4 HP
Pump, Gasket Boot
Pump, Impeller
Pump, Seal and Seat
Seals & O-Rings
O-Ring Kit
1 800 468 2326
408 321 8500
FAX: 408 321 8466
47
Q-SWITCHED
Nd:YAG
CONTROL
CLC 510, 512
Description
OEM P/N
DLI P/N
195172
195180
LMP-10021
LMP-10018
163444
007955
036137
013797
LCH-10171
LCH-10173
LCH-10140
LCH-10139
032417
032433
FLT-10128
FLT-10130
039784
039792
008789
n/a
n/a
n/a
n/a
ROD-10497
ROD-10498
ROD-10154
ROD-10141
ROD-10143
ROD-10567
ROD-10617
042465
n/a
012807
012856
012781
012815
012823
642465
042473
019976
019984
032201
032219
012245
030452
032391
028928
027862
014548
014563
012468
012518
023242
n/a
028522
079129
052548
131037
005991
110973
112920
CAV-10183
CAV-10181
CAV-10184
CAV-10182
CAV-10185
CAV-10188
CAV-10189
HBA-10363
HBA-10364
HBA-10196
HBA-10198
HBA-10195
HBA-10197
HBA-10355
HBA-10356
HBA-10241
HBA-10358
HBA-10237
HBA-10348
HBA-10349
HBA-10149
HBA-10150
HBA-10357
HDW-10351
HDW-10352
HDW-10353
HBA-10347
HDW-10280
FTG-10240
HDW-10273
HDW-10275
Lamps
Lamp, CLC 510
Lamp, CLC 512
Lamp Clip, CLC 510, 512
Lamp Terminal Block, CLC 510, 512
HV Cable Connection Kit, CLC 510-512
HV Pin, CLC 510-512
Flow Tubes
Flow Tube, Lamp/Rod, CLC510
Flow Tube, Lamp/Rod, CLC512
Rod, 4mm x 54mm, Mounted CLC510
Rod, 4mm x 79mm, Mounted CLC512
Rod Holder and Cap, 4mm, CLC 510, 512
Rod, YAG (Crystal), CLC 510
Rod, YAG (Crystal), CLC 512
Rod Rework, CLC 510, 512
Rod Rework, CLC510, 512, Mounted
1 800 468 2326
408 321 8500
FAX: 408 321 8466
48
Cavity Assembly, CLC510 , Less Rod and Lamp
Cavity Assembly, CLC512, Less Rod and Lamp
Cavity Ellipse, CLC510
Cavity Ellipse, CLC512
Cavity Endplate, CLC 510, 512
Light Shield, Upper Cavity, CLC 510, 512
Light Shield, Lower Cavity, CLC 510,512
Head Assembly, CLC 510
Head Assembly, CLC512
Head Block Bottom, CLC510
Head Block Bottom, CLC512
Head Block Top, CLC510
Head Block Top, CLC512
Head Block Insulating Cap, CLC 510, 512
Head Block Insulating Spacer, CLC 510, 512
Rod Assembly Guide Tube, CLC 510, 512
Heat Dust Shield, CLC 510, 512
Crystal Rod Clamp Ring, CLC 510, 512
Heat Sink, CLC 510
Heat Sink, CLC 512
Head Carriage Mount, CLC 510
Head Carriage Mount, CLC 512
Locking Plate, CLC 510, 512
Locking Screw, Allen Type, CLC 510, 512
Locking Screw, Knob Type, CLC 510, 512
Locking Screw Knob, CLC 510, 512
Head Bolt, CLC 510, 512
Head Bolt Washer, CLC 510, 512
Start Thread Adapter, CLC 510, 512
Nylon Screw, CLC 510, 512
Steel Set Screw, CLC 510, 512
Description
OEM P/N
DLI P/N
090274
090290
090209
YMR-10074
YMR-10075
YMR-10070
201319
QSW-10028
065479
065029
065037
065052
065060
122887
118380
119149
056275
108175
125963
116871
114132
072215
020100
ELC-10292
ELC-10293
ELC-10294
ELC-10295
ELC-10296
ELC-10277
ELC-10310
ELC-10276
ELC-10301
ELC-10829
PNE-10278
H20-10346
ELC-10343
ELC-11013
ELC-11185
072835
200477
072900
n/a
150201
093724
093732
093740
WFI-10115
WFI-10116
WFI-10376
WFI-11269
H20-10373
H20-10199
H20-10200
H20-10201
036160
036236
085225
085258
083998
083873
083998
084574
ORI-10161
ORI-10162
ORI-10350
ORI-10166
ORI-10318
ORI-10153
ORI-10318
ORI-10354
Mirrors
Output Mirror, CLC 510-512, 80% R
Output Mirror, CLC 510-512, 90% R
Rear Mirror, CLC 510-512, 100% R
Q-SWITCHED
Nd:YAG
CONTROL
CLC 510, 512
Q-Switches
Q-Switch, 24 MHz, 70 watt
Diode, F25, CLC 510, 512
Diode, ST460P, CLC 510, 512
Diode, ST1160P, CLC 510, 512
Diode, ST11100N, CLC 510, 512
Diode, ST11100P, CLC 510, 512
Krypton Tube, KN6, CLC 510, 512
SCR, 3N3899, CLC 510, 512
SCR, 50RIA80, CLC 510, 512
Cap, 2900MFD, 350V, CLC 510, 512
Temperature Control Switch, CLC 510, 512
Solenoid Valve, CLC 510, 512
Thermostat, A1-S, CLC 510, 512
Transformer, 5KVA, CLC 510, 512
Fan, Tarzan, CLC 510, 512
Fan, RF Driver, CLC 510, 512
Cooling Components
Deionization Filter, CLC 510, 512
Particle Filter, CLC 510, 512
Particle Filter, 9”, CLC510, 512
Particle Filter, Pleated
Pump, 1-Phase, 3/4 HP, CLC 510, 512
Pump, Gasket, Pump Boot, CLC 510, 512
Pump, Impeller, CLC 510, 512
Pump, Seal and Seat, CLC 510, 512
Seals & O-Rings
O-Ring Kit, CLC510
O-Ring Kit, CLC512
Main Head Block, CLC510
Main Head Block, CLC512
Head, Rod, Silicone, CLC 510, 512
Rod O-Ring,Teflon, 4mm, CLC 510, 512
Insulating O-Ring, CLC 510, 512
Adapter O-Ring, CLC 510, 512
1 800 468 2326
408 321 8500
FAX: 408 321 8466
49
Q-SWITCHED
Nd:YAG
CONTROL CLC 612
(50 & 75 WATT)
(Script, Elite, Signature,
Emblem, Instamark)
CONTROL CLC 612 (50 & 75 WATT)
(Script, Elite, Signature, Emblem, Instamark)
Description
OEM P/N
DLI P/N
227534
LMP-11539
198788 / 215327
163444
198721
198747
LCH-11216
LCH-10171
LCH-13917
LCH-13784
226969
FLT-12513
n/a
039792
008789 & 019471
n/a
n/a
ROD-10143
ROD-10498
ROD-10154
ROD-10567
ROD-10617
012823
012815
012781
012856
036228
198812
198820
n/a
023242
014563
n/a
2405-00744
032391
028928
027862
030452
013797
110973
069377
006049
036137
CAV-10188
CAV-10189
CAV-10185
CAV-10182
CAV-10181
HBA-11462
HBA-11463
HBA-14945
HBA-10357
HBA-10349
HDW-14946
HDW-14836
HBA-10241
HBA-10358
HBA-10237
HBA-10356
LCH-10139
HDW-10273
FTG-14832
FTG-11229
LCH-10140
090290
090209
YMR-10075
YMR-10070
038885
LPR-10491
201319
QSW-10028
Lamps
Lamp, Krypton Arc
V-Block
Lamp Clip
Lamp Clamp
Lamp Lifter
Flow Tubes
Flow Tube, Lamp/Rod
Rod Holder and Cap, 4mm
Rod Rework Service, (Rod Only)
Rod Rework Service, Mounted
Cavity, Light Shield, Lower
Cavity, Light Shield, Upper
Cavity, Endplate
Cavity, Ellipse
Cavity, Assembly
Head Block, Top Block
Head Block, Bottom Block
Head Carriage
Heat Sink
Head Bolt, Washer, Nylon
Head Bolt, CLC
Head Block Assembly., Rod Guide Tube
Head Block Assembly., Dust Shield
Clamp, Ring, Crystal
Insulating Spacer
HV Connector Pin
Screw, Nylon, 6-32 x 1-4”
Fitting, Water, Head Block
Fitting, Water, .75-16 x .625”
HV Kit
Mirrors
Front Mirror, 90%R (CLC 612 - 50W)
Rear Mirror, 100%R (CLC 612-50W)
Lens Protectors
Lens Protector, 3.25” diameter
Q-Switches
1 800 468 2326
408 321 8500
FAX: 408 321 8466
50
Q-SWITCHED
Nd:YAG
CONTROL CLC 612 (50 & 75 WATT) (Continued)
Description
Q-Switched YAG
OEM P/N
DLI P/N
192799
065476
065060
056275
ELC-11121
ELC-10292
ELC-10296
ELC-10301
072835
n/a
200744
150201
093724
093732
09740
WFI-10115
WFI-12197
WFI-10116
H20-10373
H20-10199
H20-10200
H20-10201
036236
083873
ORI-10162
ORI-10153
Galvo Motor, G325
Diode, F25
Diode, ST11100P
Cap, 2900MFD, 350V
CONTROL CLC 612
(50 & 75 WATT)
Emblem, Instamark)
Cooling Components
Deionization Filter
Deionization Filter, Elite/Signature
Particle Filter
Pump, 1-Phase, 3/4 HP
Pump, Impeller
Pump, Seal and Seat
Seals & O-Rings
O-Ring Kit, CLC 612
O-Ring Rod, Teflon, 4mm
1 800 468 2326
408 321 8500
FAX: 408 321 8466
51
Q-SWITCHED
Nd:YAG
CONTROL CLC 612
(100 WATT)
Emblem, Instamark)
CONTROL CLC 612 (100 WATT)
Description
OEM P/N
DLI P/N
211185
LMP-10598
198788 / 215327
163444
198721
198747
LCH-13486
LCH-10171
LCH-13917
LCH-13784
211276
FLT-10873
n/a
211227
008789 / 019471
n/a
n/a
ROD-11294
ROD-11293
ROD-10154
ROD-10567
ROD-10617
211474
012781
198706
012823
028928
027862
032391
198887
030452
198762 / 013797
110973
069377
006049
211094
211102
211169
n/a
2405-00744
CAV-14829
CAV-10185
CAV-14830
CAV-14831
HBA-10358
HBA-10237
HBA-10241
HBA-10355
HBA-10356
LCH-10139
HDW-10273
FTG-14832
FTG-11229
HBA-14833
HBA-14834
HBA-14835
HDW-10280
HDW-14836
214130
214122
YMR-10923
YMR-10070
89318
YFL-11393
038885
LPR-10491
201319
QSW-10028
Lamps
Lamp CLC 100 watt
V-Block
Lamp Clip
Lamp Clamp
Lamp Lifter
Flow Tubes
Flow Tube, Lamp/Rod
Rod Holder and Cap
Rod Rework Service, (Rod Only)
Rod Rework Service, Mounted
Cavity Ellipse
Cavity Endplate
Light Shield, Upper Cavity, CLC100 W
Light Shield, Lower Cavity, CLC 100 W
Dust Shield
Crystal Clamp Ring
Insulating Cap
Insulating Spacer
HV Connector Pin
Nylon Screw
Water Fitting, Head Block
Water Fitting, .75 - 16 x .625”
Head Block, Bottom
Head Block, Top
Heat Sink
Nylon Washer
Head Bolt
Mirrors
Front Mirror, 70%R
Rear Mirror, 100%R
Focusing Lenses
Lens, Upcollimator, Input
Lens Protectors
Lens Protector, 3.25” diameter
Q-Switches
1 800 468 2326
408 321 8500
FAX: 408 321 8466
52
Q-SWITCHED
Nd:YAG
CONTROL CLC 612 (100 WATT) (Continued)
Description
OEM P/N
DLI P/N
192799
065476
065060
056275
ELC-11121
ELC-10292
ELC-10296
ELC-10301
072835
n/a
200744
n/a
150201
093724
093732
09740
WFI-10115
WFI-12197
WFI-10116
WFI-10808
H20-10373
H20-10199
H20-10200
H20-10201
n/a
ORI-10318
Galvo Motor, G325
Diode, F25
Diode, ST11100P
Cap, 2900MFD, 350V
CONTROL CLC 612
(100 WATT)
Emblem, Instamark)
Cooling Components
Deionization Filter
Deionization Filter, Elite/Signature
Particle Filter
Particle Filter
Pump, Impeller
Pump, Seal and Seat
Seals & O-Rings
O-Ring Rod Seals, CLC 100
1 800 468 2326
408 321 8500
FAX: 408 321 8466
53
Q-SWITCHED
Nd:YAG
ELECTROX
RAYMARKER/
SCRIBA (75 WATT)
ELECTROX RAYMARKER/SCRIBA (75 WATT)
Description
OEM P/N
DLI P/N
262-000-010
630-007-805
LMP-10001
LMP-10005
271-003-001
FLT-10530
634-000-001
n/a
ROD-10939
ROD-10683
266-000-001
n/a
266-000-002
631-000-014
631-000-022
YMR-11082
YMR-10070
YMR-10075
YMR-11113
YMR-11112
263-000-004
263-000-003
YFL-11007
YFL-11008
632-000-005
LPR-10221
268-000-002
QSW-10028
077-000-009
076-000-003
076-000-004
WFI-10124
WFI-10422
WFI-11737
OEM P/N
DLI P/N
262-000-018
LMP-10003
271-003-001
FLT-10530
n/a
n/a
ROD-11192
ROD-10683
266-000-001
n/a
266-000-002
YMR-11082
YMR-10070
YMR-10075
263-000-004
263-000-003
YFL-11007
YFL-11008
632-000-005
LPR-10221
268-000-002
QSW-10028
077-000-009
076-000-003
076-000-004
WFI-10124
WFI-10422
WFI-11737
Lamps
Lamp, Krypton Arc
Lamp, Krypton Arc (HV), Scriba
Flow Tubes
Flow Tube, 96mm, Pyrex
Rod, .25” x 4.5”, Unmounted
Rod, Rework
Mirrors
Rear Mirror, 100%R/AR
Rear Mirror, 100%R
Front Mirror, 90%R
Galvo Mirror, Round
Galvo Mirror, Rectangle
Focusing Lenses
Focusing Lens, Upcollimator, Input
Focusing Lens, Upcollimator, Output
Lens Protectors
Lens Cover, 3” diameter
Q-Switches
Q-Switch, 24MHz
Cooling Components
Deionization Filter
Particle Filter
Particle Filter
ELECTROX
RAYMARKER/
SCRIBA (120 WATT)
ELECTROX RAYMARKER/SCRIBA (120 WATT)
Description
Lamps
Lamp, Krypton Arc
Flow Tubes
Flow Tube, 96mm, Pyrex
Rod, .25” x 6.5”, Unmounted
Rod, Rework
Mirrors
Rear Mirror, 100%R/AR
Rear Mirror, 100%R
Front Mirror, 90%R
Focusing Lens
Focusing Lens, Upcollimator, Input
Focusing Lens, Upcollimator, Output
Lens Protectors
Lens Cover, 3” diameter
1 800 468 2326
408 321 8500
FAX: 408 321 8466
54
Q-Switches
Q-Switch, 24MHz
Cooling Components
Deionization Filter
Particle Filter
Particle Filter
ESI 3570
Description
OEM P/N
DLI P/N
43827
LMP-10015
46836
44572
LCH-10175
LCH-10944
45908
FLT-10127
n/a
948548
n/a
n/a
n/a
n/a
n/a
ROD-10142
ROD-10499
ROD-11745
ROD-13973
ROD-13989
ROD-10567
ROD-10743
48545
46805
46803
46804
n/a
n/a
51480
44580
44850
44578
44571
n/a
46795
CAV-10953
CAV-10813
CAV-10802
CAV-10803
CAV-11093
CAV-11092
HBA-10954
HBA-10777
HBA-10925
HBA-10942
HBA-10941
HBA-10943
FTG-10940
44495
57341
54044
46643
YMR-10074
YMR-10447
YMR-10070
YMR-11098
41482
29833
65498
42107
n/a
ELC-10594
ELC-10227
ELC-10595
ELC-10360
LMP-10719
44479
QSW-13235
25016
46454
65012
51748
n/a
n/a
n/a
WFI-10119
WFI-10122
H20-11150
H20-10537
H20-10538
H20-10540
H20-10541
48546
n/a
n/a
ORI-10164
ORI-10157
ORI-10539
ESI 3570
Lamps
Lamp, Krypton Arc
Q-SWITCHED
Nd:YAG
Lamp Clip
Lamp Terminal Block
Flow Tubes
Flow Tube, Lamp/Rod
Rod, 3mm x 79mm, Mounted, R/E
Rod, 3mm x 85mm
Rod, Rework, 3mm
Rod Holder and Cap, 3mm
Cavity Assembly
Cavity Ellipse
Cavity Endplate, Right, Upper
Cavity Endplate, Left, Upper
Cavity Endplate, Right, Lower
Cavity Endplate, Left, Lower
Head Assembly (less rod and lamp)
Head Block, Bottom
Head Block, Top
Head Block, Rod Guide Tube
HV Connector Pin
Rod Compression Cap
Water Fitting
Mirrors
Front Mirror, 80%R
Front Mirror, 80%R, 1Mcc
Rear Mirror, 100%R
Rear Mirror, 100%R, 2Mcx
Encoder Position Head
Encoder LED Assembly
Encoder Scale
Encoder Lamp, Step and Repeat
Illuminator Bulb, 80W, 19V
Q-Switches
Q-Switch, 41.1 MHz
Cooling Components
Deionization Filter
Particle Filter
Heat Exchanger
Pump, Seal
Pump, Impeller
Pump, Volute
Seals & O-Rings
O-Ring Kit, 3570 Series
O-Ring, Rod, Teflon, Silicone
Pump, O-Ring
1 800 468 2326
408 321 8500
FAX: 408 321 8466
55
Q-SWITCHED
Nd:YAG
LEE LASER 708
Description
LEE LASER 708
Lamps
Lamp, Lee 708
Lamp, Lee 708
OEM P/N
DLI P/N
LKA3020 (20 Amp)
LKA3330 (30 Amp)
LMP-10449
LMP-10328
12000011
1000050
n/a
LCH-10177
LCH-10338
LCH-11227
F3411PL0
F3414QR0
FLT-10450
FLT-10451
n/a
1000003
n/a
n/a
n/a
n/a
n/a
ROD-10143
ROD-11317
ROD-10619
ROD-10498
ROD-10142
ROD-10567
ROD-10617
01000005Q
n/a
n/a
n;/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
CAV-11032
CAV-11226
CAV-11225
CAV-11233
CAV-11234
CAV-11235
HBA-10347
HDW-10280
HBA-11223
HBA-11029
HBA-11030
HBA-11246
HBA-11228
HBA-14846
FTG-11229
HBA-11230
HBA-11231
HBA-11232
12000008
12000007
YMR-10075
YMR-10070
12000017
QSW-10329
12000013
WFI-10124
n/a
ORI-10167
Contact Band
Lamp Terminal Block
Flow Tubes
Flow Tube, Lamp
Flow Tube, Rod
Rod, Assembly, YAG, 3mm
Rod, Assembly, 4mm
Rod, Crystal, 3mm
Rod, Rework
Rod, Rework, Mounted
Cavity Assembly, Lee 708
Cavity Ellipse
Light Shield, Upper
Light Shield Lower
Head Bolt
Washer, Nylon
Heat Sink, Head Top
Head Block, Top
Head Block Bottom
HV Pin
Head Carriage
Water Fitting
Rod Guide Tube
Rod Clamp Ring
Dust Shield
Mirrors
Front Mirror
Rear Mirror
Q-Switches
Q-Switch 27.12 MHz
Cooling Components
Deionization Combination Filter
1 800 468 2326
408 321 8500
FAX: 408 321 8466
56
Seals & O-Rings
O-Ring Kit
LEE LASER 712
Description
OEM P/N
DLI P/N
LEE LASER 712
Lamps
Lamp, Lee 712
Lamp, Lee 712
Q-SWITCHED
Nd:YAG
LKA3020 (20 Amp)
LKA3330 (30 Amp)
LMP-10449
LMP-10328
12000011
1000050
n/a
LCH-10177
LCH-10338
LCH-11227
F3411PL0
F3414QR0
FLT-10450
FLT-10451
n/a
n/a
1000002
n/a
n/a
n/a
ROD-10142
ROD-10143
ROD-14908
ROD-11317
ROD-10567
ROD-10617
1000076
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
CAV-11031
CAV-11226
CAV-11233
CAV-11225
CAV-11237
CAV-11236
HBA-10347
HDW-10280
HBA-11223
HBA-11029
HBA-11030
HBA-11246
HBA-11228
HDW-14846
FTG-11229
HBA-11230
HBA-11231
HBA-11232
12000008
120000024
12000007
YMR-10075
YMR-10080
YMR-10070
12000017
QSW-10329
12000013
WFI-10124
Contact Band
Lamp Terminal Block
Flow Tubes
Flow Tube, Lamp
Flow Tube, Rod
Rod, Crystal only, 3 mm
Rod, Crystal only, 4 mm
Rod, Rework, 3mm and 4mm, Unmounted
Rod, Rework, 3mm and 4mm, Mounted
Cavity Assembly
Cavity Ellipse
Light Shield, Upper
Light Shield, Lower
Head Bolt
Washer, Nylon
Heat Sink, Head Top
Head Block, Top
Head Block, Bottom
HV Pin
Head Carriage
Water Fitting
Rod Guide Tube
Rod Clamp Ring
Dust Shield
Mirrors
Front Mirror
Front Mirror, curved
Rear Mirror
Q-Switches
Q-Switch, 27.12 MHz
Cooling Components
Deionization Combination Filter
Seals & O-Rings
O-Ring Kit
ORI-10167
1 800 468 2326
408 321 8500
FAX: 408 321 8466
57
Q-SWITCHED
Nd:YAG
LEE LASER
715, 718
LEE LASER 715, 718
Description
OEM P/N
DLI P/N
LKA-4030
LMP-11074
12000011
1000050
n/a
LCH-10177
LCH-10338
LCH-11227
F4411PLO
F4414PLO
FLT-11161
FLT-11162
n/a
n/a
n/a
n/a
ROD-12555
ROD-14224
ROD-14223
ROD-14842
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
CAV-14841
CAV-11233
CAV-11225
CAV-11235
CAV-14839
CAV-14840
CAV-11234
HBA-11246
HBA-11230
HBA-14843
HDW-14837
HDW-14838
FTG-14832
FTG-14844
FTG-14845
HBA-14846
HBA-14847
HBA-14850
HBA-14848
HBA-14849
HDW-14851
HDW-14852
HDW-14853
12000008
12000007
YMR-10075
YMR-10070
LQS-815
QSW-10329
12000032
WFI-11122
Lamps
Lamp, Lee 715/718
Lamp, Contact Band
Lamp, Contact Block
Lamp, Terminal Block
Flow Tubes
Flow Tube, Lamp, 4.4”
Flow Tube, Rod, 4.4”
Rod, 4 mm x 108 mm
Rod, 4 mm x 108 mm, Mounted
Rod Holder with Cap, Lee 715/718
Rod End Cap, Lee
Cavity, Ellipse, Lee 715/718
Cavity Endplate, Lower Right, Upper Left
Cavity Endplate, Lower Left, Upper Right
Teflon Light Shield, Lower Left
Teflon Light Shield, Upper Left
Teflon Light Shield, Upper Right
HV Pin, Lee 715/718
Rod Guide, Lee 715/718
Dust Boot, Lee
Washer SS Split
Screw, Lamp Mounting Block
Fitting Head Block Water
Water Fitting, .625” O.D.
Water Fitting, Reducer, .5” O.D.
Lower Head Carriage
Head Block Upper
Head Block Lower
Heat Sink, Lee 715/718
Nylon Washer
SS Washer
Head Block Bolt
Mirrors
Front Mirror
Rear Mirror
Q-Switches
Q-Switch, 27.12 MHz
Cooling Components
1 800 468 2326
408 321 8500
FAX: 408 321 8466
58
LEE LASER 808, 812
Description
OEM P/N
DLI P/N
LKA3020 (20 Amp)
LKA3330 (30 Amp)
LMP-10449
LMP-10328
12000011
1000050
n/a
n/a
n/a
n/a
LCH-10177
LCH-10338
LCH-14855
LCH-14856
LCH-14857
LCH-14858
n/a
n/a
FLT-10450
FLT-14854
n/a
n/a
n/a
n/a
n/a
n/a
ROD-10143
ROD-11317
ROD-14842
ROD-11316
ROD-12329
ROD-12328
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
CAV-13156
CAV-11226
CAV-14862
CAV-14861
CAV-14863
CAV-14864
CAV-11234
CAV-14860
CAV-14865
CAV-11235
HBA-14859
HBA-14866
HBA-14867
HBA-14870
FTG-14832
FTG-14845
FTG-14844
HBA-14846
HBA-14868
HBA-14869
HBA-14871
HBA-14872
HDW-14851
HDW-14852
HDW-14853
HDW-14838
HDW-14837
12000008
12000007
YMR-10075
YMR-10070
LQS-808/812
QSW-10329
12000032
WFI-11122
Lamps
Lamp, Lee 808
Lamp, Lee 808/812
Q-SWITCHED
Nd:YAG
LEE LASER
808, 812
Contact Band
Lamp Contact Block Right
Lamp Terminal Block Right
Lamp Contact Block Left
Lamp Terminal Block Left
Flow Tubes
Flow Tube, Lamp, Lee 808/812
Flow Tube, Lamp/Rod (Doped) Samarium, Lee 808/812
Rod 4mm x 79mm
Rod 4mm x 79mm, Mounted
Rod End Cap, Lee 808/812
Rod Hardware
Rod Holder, 4mm Rod (W/Cap), Long
Rod Holder, 4mm Rod (W/Cap), Short
Cavity, Assembly, Lee 808
Cavity, Ellipse
Cavity Endplate, Lower, Right, Lee
Cavity End Plate, Upper, Left
HV Connector Pin, Lee
Dust Boot, Lee 808/812
Rod Guide, Short, Lee 808/812
Rod Guide, Long, Lee 808/812
Water, Fitting, Head Block, .625”
Water, Fitting, Reducer
Water, Fitting, .625” OD SS
Lower Head Carriage
Head Block, Bottom, Lower
Heat Sink, Lee 808/812
Head Block, Top, Lee 808/812
Nylon Washer, Head Lee
SS Washer, Head Lee
Head Bolt, SS Lee
Washer SS Split
Mirrors
Front Mirror
Rear Mirror
Q-Switches
Q-Switch 27.12 MHz
Cooling Components
1 800 468 2326
408 321 8500
FAX: 408 321 8466
59
Q-SWITCHED
Nd:YAG
LEE LASER
815, 818, 825
LEE LASER 815, 818, 825
Description
OEM P/N
DLI P/N
LKA-4030
LMP-11074
n/a
n/a
n/a
n/a
n/a
n/a
LCH-10177
LCH-14874
LCH-14875
LCH-14876
LCH-14877
LCH-14878
n/a
n/a
FLT-14873
FLT-11161
n/a
n/a
n/a
ROD-12555
ROD-14224
ROD-14223
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
CAV-14841
CAV-14881
CAV-14880
CAV-14882
CAV-14884
CAV-11235
CAV-14879
CAV-11234
CAV-14883
HBA-14885
HBA-14886
HBA-14887
FTG-14832
FTG-14845
FTG-14844
HBA-14846
HBA-14888
HBA-14889
HBA-14890
HBA-14891
HDW-14851
HDW-14852
HDW-14853
HDW-14837
HDW-14838
12000008
12000007
YMR-10075
YMR-10070
LQS-815/818/825
QSW-10329
12000032
WFI-11122
Lamps
Lamp, Lee 815,818,825
Lamp Contact Band
Lamp Terminal Block, Right
Lamp Contact Block, Right
HV Pin, Lee 818
Lamp Contact Block, Left
Lamp Terminal Block, Left
Flow Tubes
Flow Tube, Rod, Samarium Doped, Lee 818
Flow Tube, Lamp, Lee 4.4
Rod, 4mm x 108mm
Rod Holder and Cap, Lee 818
Cavity Ellipse, Lee
Cavity Endplate, Lower, Right
Cavity End Plate, Upper, Left
Dust Boot, Lee 818
Rod End Cap, Lee 818
Rod Guide, Lee 818
Water, Fitting, Head Block
Water, Fitting, Reducer, .5” OD
Water, Fitting, .625” OD SS
Lower Head Carriage, Lee 818
Lower Head Block, Lee 818
Heat Sink, Lee 818
Head Block, Upper, Lee 818
Nylon Washer
Washer SS
Head Bolt
Washer SS Split
Lamp Mounting Block Screw
Mirrors
Front Mirror
Rear Mirror
1 800 468 2326
408 321 8500
FAX: 408 321 8466
60
Q-Switches
Q-Switch, 27.12 MHz
Cooling Components
QUANTRAD, LASERMETRICS 9555
Description
OEM P/N
DLI P/N
n/a
LMP-10696
n/a
n/a
LCH-10175
LCH-11255
n/a
n/a
FLT-10712
FLT-10711
n/a
n/a
ROD-10978
ROD-10935
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
CAV-10823
CAV-11026
CAV-11252
CAV-11253
HBA-10347
HDW-10280
HBA-11250
HBA-11251
HBA-11256
HBA-11257
HBA-11258
HDW-10245
FTG-11259
HBA-11027
HBA-11261
HBA-11262
n/a
n/a
QSW-10028
QSW-10329
n/a
ORI-11263
Lamps
Krypton Lamp
Q-SWITCHED
Nd:YAG
QUANTRAD,
LASERMETRICS 9555
Lamp Clip
Lamp Terminal Block
Flow Tubes
Rod, Flow Tube
Lamp, Flow Tube
YAG Rod Assembly, 5mm x 79mm
YAG Rod, Crystal only, 5mm x 79mm
Cavity Ellipse
Head Bolt
Washer, Nylon
Head Block, Top
Heat Sink
Rod Guide Tube
Crystal Clamp Ring
Dust Boot
Water Fitting
Head Block, Bottom
Head Carriage
HV Pin
Q-Switches
Q-Switch, 24 MHz
Q-Switch, 27.12 MHz
Seals & O-Rings
O-Ring Kit
1 800 468 2326
408 321 8500
FAX: 408 321 8466
61
Q-SWITCHED
Nd:YAG
QUANTRONIX 114
Description
QUANTRONIX 114
Lamps
Lamp, Krypton Arc, Long Life
Lamp Assembly
OEM P/N
DLI P/N
2601-00019
2601-00183
0201-0048
LMP-10017
LMP-11117
LMP-10964
0201-00386
0201-00394
1401-00859
1401-00867
3502-00232
LCH-10486
LCH-10487
LCH-10507
LCH-10508
LCH-11660
0201-00378
0201-01897
FLT-10137
FLT-10963
n/a
1001-00337
n/a
n/a
n/a
ROD-10144
ROD-10934
ROD-11324
ROD-10616
ROD-10959
0201-03172
1010-00056
1401-03726
1401-03734
1401-03785
1401-01081
0201-00696
0201-03245
1401-00638
1401-01049
1401-01057
1401-03742
n/a
n/a
CAV-10960
CAV-10932
CAV-10961
CAV-10962
CAV-10929
HBA-11053
HBA-10898
HBA-10897
HBA-11056
HBA-11052
HBA-11051
HBA-11057
HBA-10899
FTG-11055
1102-00491
1102-00397
YMR-10924
YMR-10512
0201-03576
QSW-10792
3002-01194
3002-01062
2802-00254
2802-0122
0202-00193
093724
093732
093740
WFI-10117
WFI-10123
WFI-10114
H20-10907
H20-11369
H20-10199
H20-10200
H20-10201
2704-00467
2704-00556
2704-00139
2704-00416
n/a
2704-00513
ORI-10509
ORI-10605
ORI-10418
ORI-10682
ORI-10820
ORI-10822
n/a
n/a
TST-11144
TST-11099
Anode Socket
Cathode Socket
Threaded Retainer
Pressure Washer
Cable, Anode/Cathode
Flow Tubes
Flow Tube, Lamp
Flow Tube, Rod
Rod, Unmounted, 3mm x 65mm
Rod, Mounted, 3mm x 65mm
Rod, Mounted, 3mm x 65mm, R/E
Rod Assembly, Rework
Rod Flow Tube Kit
Cavity Assembly
Cavity Reflector Ellipse
Cavity Reflector Top
Cavity Reflector Bottom
Cavity Endplate
Light Shield
Head Block Top
Head Block Bottom
Lamp Pressure Plate
Lamp End Plate
Water Inlet Block
Adapter
Water Fitting
Mirrors
Front Mirror, F/W, 12%
Rear Mirror, F/W, HR
Q-Switches
Q-Switch, 68 MHz
Cooling Components
Deionization Filter, Flat
Deionization Filter, Nippled
Heat Exchanger
Pump, 1-Phase, 1 HP
Pump, Impeller
Pump, Seal and Seat
Seals & O-Rings
1 800 468 2326
408 321 8500
FAX: 408 321 8466
62
Seal Ring
O-Ring Kit
O-Ring Head
O-Ring Lamp Plate
O-Ring Rod Jacket
O-Ring Rod
Test & Safety Equipment
Arclamp Power Supply, Repair
Arclamp Power Supply, Exchange
QUANTRONIX 116
Description
OEM P/N
DLI P/N
QUANTRONIX 116
Lamps
Lamp Assembly
Q-SWITCHED
Nd:YAG
2601-00078
2601-00167/2601-00132
0201-00653
LMP-10023
LMP-11000
LMP-10776
0201-00386
0201-00548
1401-00859
1401-00867
3502-00232
LCH-10486
LCH-10631
LCH-10507
LCH-10508
LCH-11660
0201-00378
n/a
0201-01919
FLT-10137
FLT-12380
FLT-10933
n/a
n/a
1001-00353
n/a
n/a
n/a
n/a
n/a
ROD-11521
ROD-10143
ROD-10670
ROD-11419
ROD-11222
ROD-11221
ROD-10616
ROD-10669
0201-03199
1010-00129
1401-03793
1401-03807
1401-03785
1401-01936
n/a
0201-00696
0201-03245
1401-01979
1401-01049
1401-01057
1401-03777
n/a
CAV-10965
CAV-10930
CAV-10966
CAV-10967
CAV-10929
HBA-11054
FTG-11055
HBA-10898
HBA-10897
HBA-11056
HBA-11052
HBA-11051
HBA-11009
HBA-10899
1102-00966
1102-00419
1102-00249
1102-00397
YMR-11096
YMR-10924
YMR-10922
YMR-10512
0201-03576
QSW-10792
Anode Socket
Cathode Socket
Threaded Retainer
Pressure Washer
Cable, Anode/Cathode
Flow Tubes
Flow Tube, Lamp
Flow Tube, Lamp Assembly
Flow Tube, Rod
Rod, 3mm x 79mm, W/-1Mcc, Mounted
Rod, 4mm x 79mm, Mounted, R/E
Rod, High Doped, Unmounted, 4mm x 79mm
Rod, High Doped, Mounted, 4mm x 79mm
Rod Flow Tube Kit
Cavity Assembly
Cavity Reflector, Top
Cavity Reflector, Bottom
Cavity Endplate
Light Shield
Water Fitting
Head Block, Top
Head Block, Bottom
Lamp Pressure Plate
Lamp End Plate
Water Inlet Block
Adapter
Mirrors
Front Mirror, +70, 20%
Front Mirror, F/W, 12%
Rear Mirror, -70/W, HR
Q-Switches
Q-Switch, 68 MHz
1 800 468 2326
408 321 8500
FAX: 408 321 8466
63
Q-SWITCHED
Nd:YAG
QUANTRONIX 116
QUANTRONIX 116 (Continued)
Description
OEM P/N
DLI P/N
3002-01194
3002-01062
2802-00254
2802-0122
0202-00193
093724
093732
093740
WFI-10117
WFI-10123
WFI-10114
H2O-10907
H2O-11369
H2O-10199
H2O-10200
H2O-10201
2704-00467
2704-00556
2704-00139
2704-00416
n/a
2704-00939
ORI-10509
ORI-10605
ORI-10418
ORI-10682
ORI-10819
ORI-10821
n/a
n/a
TST-11144
TST-11099
OEM P/N
DLI P/N
2601-00043
2601-00175/2601-00159
LMP-10147
LMP-11326
0201-00386
0201-00548
1401-00859
1401-00867
LCH-10486
LCH-10631
LCH-10507
LCH-10508
0201-00521
n/a
0201-01935
FLT-11104
FLT-12565
FLT-11199
n/a
n/a
1001-00485
n/a
n/a
ROD-14944
ROD-11344
ROD-11343
ROD-10938
ROD-11200
Cooling Components
Heat Exchanger
Pump, 1-Phase, 1 HP
Pump, Impeller
Pump, Seal and Seat
Seals & O-Rings
Seal Ring
O-Ring Kit
Head O-Ring
O-Ring Lamp Plate
O-Ring Rod
O-Ring Rod Jacket
Test & Safety Equipment
Arclamp Power Supply, Repair
Arclamp Power Supply, Exchange
QUANTRONIX 117
QUANTRONIX 117
Description
Lamps
Anode Socket
Cathode Socket
Threaded Retainer
Pressure Washer
Flow Tubes
Flow Tube, Lamp
Flow Tube, Lamp Assembly
Flow Tube, Rod
1 800 468 2326
408 321 8500
FAX: 408 321 8466
64
Rod, Unmounted, 6.3mm x 104mm
Rod, Mounted, 6.3mm x 104mm
Rod Flow Tube Kit
Q-SWITCHED
Nd:YAG
QUANTRONIX 117
Description
QUANTRONIX 117
OEM P/N
DLI P/N
0201-03164
1010-00102
1401-03696
1401-03718
1401-03785
n/a
n/a
n/a
0201-00955
1401-04528
1401-01707
1401-01049
1401-01057
1401-03769
CAV-11333
CAV-11336
CAV-11334
CAV-11335
CAV-10929
HBA-11338
HBA-10899
FTG-11055
HBA-11342
HBA-11340
HBA-11056
HBA-11052
HBA-11051
HBA-11337
1102-00397
1109-01156
YMR-10512
YMR-11198
0201-03576
0103-02443
QSW-10792
QSW-16317
3002-01194
3002-01062
2802-00254
2802-0122
0202-00193
093724
093732
093740
WFI-10117
WFI-10123
WFI-10114
H20-10907
H20-11369
H20-10199
H20-10200
H20-10201
2704-00467
2704-00556
2704-00327
2704-00475
2704-00459
ORI-10509
ORI-11341
ORI-11339
ORI-10682
ORI-10821
Cavity Assembly
Cavity Reflector, Top
Cavity Reflector, Bottom
Cavity Endplate
Light Shield
Adapter, Head Block
Water, Fitting, Head Block, Adapter
Head Block, Top
Head Block, Bottom
Lamp Pressure Plate
Lamp End Plate
Water Inlet Block
Mirrors
Front Mirror, F/W, 20T%
Q-Switches
Q-Switch, 68 MHz
Q-Switch, 24 MHz
Cooling Components
Heat Exchanger
Pump, 1-Phase, 1 HP
Pump, Impeller
Pump, Seal and Seat
Seals & O-Rings
Seal Ring
O-Ring Kit
Head O-Ring
O-Ring Lamp Plate
O-Ring Rod Jacket
1 800 468 2326
408 321 8500
FAX: 408 321 8466
65
Q-SWITCHED
Nd:YAG
QUANTRONIX 118
Description
QUANTRONIX 118
Lamps
OEM P/N
DLI P/N
2601-00108
LMP-11126
0201-00386
0201-00548
1401-00859
1401-00867
LCH-10486
LCH-10631
LCH-10507
LCH-10508
0201-03717
n/a
0201-03709
FLT-11154
FLT-13663
FLT-11355
n/a
1001-00647
n/a
n/a
ROD-11330
ROD-11331
ROD-10938
ROD-11153
0201-03725
1010-00234
1401-04102
1401-04021
1401-04129
n/a
n/a
n/a
0201-00955
1401-04528
1401-04153
1401-01049
1401-01057
CAV-11345
CAV-11247
CAV-11346
CAV-11347
CAV-11348
HBA-11350
HBA-10899
FTG-11055
HBA-11342
HBA-11340
HBA-11056
HBA-11052
HBA-11051
1102-00397
1102-01482
1102-01504
YMR-10512
YMR-11271
YMR-11280
0201-03576
QSW-10792
3002-01194
3002-01062
2802-00254
2802-0122
0202-00193
093724
093732
093740
WFI-10117
WFI-10123
WFI-10114
H20-10907
H20-11369
H20-10199
H20-10200
H20-10201
2704-00467
2704-00556
2704-00327
2704-00475
2704-00459
ORI-10509
ORI-11353
ORI-11351
ORI-10682
ORI-10821
Anode Socket
Cathode Socket
Threaded Retainer
Pressure Washer
Flow Tubes
Flow Tube, Lamp
Flow Tube, Lamp Assembly, Long Life
Flow Tube, Rod
Rod, Unmounted, 7mm x 146 mm
Rod Flow Tube Kit
Cavity Assembly
Cavity Reflector Top
Cavity Reflector Bottom
Cavity Endplate
Light Shield
Adapter, Head Block
Water, Fitting, Head Block, Adapter
Head Block Top
Head Block Bottom
Lamp Pressure Plate
Lamp Endplate
Mirrors
Rear Mirror, Old Style
Rear Mirror, New Style
Q-Switches
Q-Switch, 68 MHz
Cooling Components
Heat Exchanger
Pump, 1-Phase, 1 HP
Pump, Impeller
Pump, Seal and Seat
Seals & O-Rings
1 800 468 2326
408 321 8500
FAX: 408 321 8466
66
Seal Ring
O-Ring Kit
Head O-Ring
O-Ring Lamp Plate
O-Ring Rod Jacket
COHERENT E SERIES / M SERIES
Description
CO2 LASERS
OEM P/N
DLI P/N
0503-206-01
0156-329-00
0504-182-01
CMR-10041
CMR-10033
CMR-10046
0503-206-01
0701-097-04
CMR-10041
CMR-10047
0503-206-01
0156-329-00
CMR-10041
CMR-10033
0503-292-01
CMR-10045
0503-206-01
0156-329-00
0504-182-01
CMR-10041
CMR-10033
CMR-10046
0503-206-01
0701-097-04
CMR-10041
CMR-10047
Coherent E275/E325-1/M46-1 Mirrors
Rear Mirror, Germanium 1.1” dia.; 20 meter CC/PL; R=99% at 10.6
Fold Mirror, Silicon, 1.5” dia. x .380” thick; PL/PL; R > 99.8% at 10.6
Output Coupler, Gallium Arsenide, 1.1” dia.; PL/PL; R=65% at 10.6
COHERENT
E SERIES / M SERIES
Coherent E325-2/M46-2 Mirrors
Rear Mirror, Germanium, 1.1” dia.; 20 meter CC/PL; R=99% at 10.6
Output Mirror, Gallium Arsenide, 1.1” dia.; PL/PL; R=85% at 10.6
Coherent E525-1/M48-1 Mirrors
Coherent E525-1/M48-1 Mirror
Output Mirror, Gallium Arsenide, 1.1” dia.; 20 meters CC/PL; R=27% at 10.6
Rear Mirror, Geranium, 1.1” dia.; 20 meter CC/PL; R=99% at 10.6
Output Coupler, Gallium Arsenide, 1.1” dia.; PL/PL; R=65% at 10.6
1 800 468 2326
408 321 8500
FAX: 408 321 8466
67
CO2 LASERS
COHERENT EFAs
COHERENT EFAs
Description
OEM P/N
DLI P/N
0510-368-00
0156-329-00
0510-367-01
CMR-10042
CMR-10033
CMR-10051
0510-368-00
0156-329-00
CMR-10042
CMR-10033
0333-338-00
0510-367-01
CMR-10987
CMR-10051
OEM P/N
DLI P/N
0533-005-00
CMR-11145
0156-330-00
0156-329-00
CMR-10043
CMR-10033
0156-330-00
0156-329-00
0156-331-00
CMR-10043
CMR-10033
CMR-10048
0333-935-01
CMR-12899
0333-936-01
CMR-12370
0333-937-01
CMR-12369
0333-934-01
CMR-12225
0514-237-00
0156-329-00
0514-236-00
CMR-10345
CMR-10033
CMR-10344
Coherent EFA M-51 Mirror
Rear Mirror, Geranium, 1.5” dia.; 15 meter CC/PL R=99.5% at 10.6
Output Mirror, Zinc Selenide, 1.5” dia.;
20 meter CC/12 meter CX; R=57% at 10.6
Coherent EFA M-51-SH Mirror
Rear Mirror, Geranium, 1.5” dia.; 15 meter CC/PL R=99.5% at 10.6
Fold Mirror, Silicon, 1.5” dia. x .380”;
PL/PL R > 99.8% @10.6; (need four)
Fold Mirror, Silicon, 1.5” dia. x .380” thick; PL/PL; (need two)
Output Mirror, Zinc Selenide, 1.5” dia.,
20 meter CC/12 meter CX, R=57% @ 10.6
COHERENT E SERIES /
COHERENT SUPER
SERIES
COHERENT E SERIES/COHERENT SUPER SERIES
Description
Coherent E3500/E7000 Mirror
Output Mirror, Zinc Selenide, 1.5” dia. x .236”,
10 meter CC/5.1 meter CX, R=57% @10.6
Rear Mirror, Germanium, 1.5” dia.; 10 meter CC/0.7CX; R=99% at 10.6
Fold Mirror, Silicon, 1.5” dia x .380” thick; PL/PL; R > 99.8% at 10.6
Coherent Super48 Mirror
Rear Mirror, Germanium, 1.5” dia.; 10 meter CC/0.7CX; R=99% at 10.6
Fold Mirror, Silicon, 1.5” dia x .380” thick; PL/PL; R > 99.8% at 10.6
Output Mirror, Gallium Arsenide, 1.5” dia.;
10 meter CC/5.4 meter CX; R=27% at 10.6
Coherent Super48+ Mirror
Rear Mirror, Germanium, 1.5” dia.;
30 meter CC/0.75 meter CX; R=99% at 10.6
Fold Mirror, Spherical, Silicon, 1.5” x 32 mm dia. x .380” thk;
40 meter CC/PL; R > 99.8% at 10.6
Fold Mirror, Cylindrical, Silicon, 1.5” x 28 mm dia. X .380” thk;
40 meter CC/PL; R > 99.8% at 10.6
Output Mirror, 1.5” dia.; 30 meter CC/10 meter CX; R = 27% at 10.6
Coherent E50 Mirror
Rear Mirror, Germanium, 1.5” dia.; 10 meter CC/PL; R=99.5% at 10.6
Output Mirror, Zinc Selenide, 1.5” dia. PL/PL; R=75% at 10.6
1 800 468 2326
408 321 8500
FAX: 408 321 8466
68
CO2 LASERS
COHERENT M SERIES, M41, M42, M43, M150/M45-1
Description
OEM P/N
DLI P/N
0401-004-10
CMR-10093
0401-004-00
0504-182-01
CMR-10035
CMR-10046
0401-004-10
CMR-10093
0401-152-85
CMR-10044
0401-004-00
0156-329-00
0704-003-02
CMR-10035
CMR-10033
0503-206-01
0156-329-00
0701-097-04
CMR-10041
CMR-10033
CMR-10047
OEM P/N
DLI P/N
09915
06560
06500
07500
MRW50F
S-50-F
9050F
CMR-11141
CMR-11282
CMR-11142
CMR-11276
CMR-11140
CMR-11277
CMR-11278
COHERENT M SERIES
M41, M42, M43,
M150/M45-1
Coherent M41 Mirrors
Rear Mirror, Silicon, 1.75” dia. x .160” thick;
10 meter CC/PL; R > 99.8% at 10.6
Output Coupler, 1.1” dia.; PL/PL; R=65% at 10.6
Rear Mirror, Silicon, 1.75” dia. x .160” thick;
10 meter CC/PL; R > 99.8% at 10.6
Output Mirror, Germanium, 1.75” dia.; PL/PL; R=85% at 10.6
Rear Mirror, Silicon, 1.75” dia x .160” thick; PL/PL; R > 99.8% at 10.6
Fold Mirror, 1.5” dia. x .380” thick; PL/PL; R > 99.8% at 10.6
Output Mirror, Gallium Arsenide, 1.1” dia., PL/PL R=80% @10.6
Coherent M150/M45-1 Mirrors
ELECTROX, ALL MODELS
Description
ELECTROX,
ALL MODELS
Mirrors
Rear Mirror, Mounted 25mm, ZnSe, 99.5%R
Output Mirror, Mounted 25mm, 60MCC, ZnSe, 63%R
Output Mirror, Mounted 25mm, PL/PL, 65%R
Output Mirror, Mounted 25mm, PL/PL, 75%R
Corner Mirror, 50mm x 25mm Water Cooled
Bend Mirror, External 50mm x 10mm, Cu
Mirror, 1/4 Wave, 50mm x 10mm, Si
1 800 468 2326
408 321 8500
FAX: 408 321 8466
69
CO2 LASERS
MITSUBISHI
MITSUBISHI
Description
OEM P/N
DLI P/N
W104
W269
W270
W390
W387
W266
W267
W004
W165
W002
HDW-12521
BMD-11937
BMD-11938
BMD-11931
BMD-11932
BMD-11929
BMD-11930
BMD-12469
BMD-12484
BMD-11785
PR/R500
TR/R003
ITR/R106
ITR/R106A
STR/R107
PR/R519
BM/W513
PR/R508
CMR-11175
CMR-11176
CMR-11177
CMR-11332
CMR-11405
CMR-11756
CMR-11610
CMR-11566
1/4 Wave Mirror, External, 2” x .200” Si, R> 98.5%
BM/R004
Bend Mirror, External, 50mm dia. x 5mm Cu R> 99.8%
Bend Mirror, External, Zero Phase, 60mm x 6mm,
Cu. R> 99.8% Zero Phase
Bend Mirror, External, 60mm dia. x 6mm 14Mcc/PL,
Cu. R> 99.8%
External Mirror, 3” x .250” thick, Cu, 1/4 wave
BM/W102
BM/R051
CMR-11174/
CMR-11077
CMR-11406
CMR-11609
BM/W513
CMR-11610
BM/R160
CMR-14822
W006
W007
W500
W018
W510
W505
CFL-10459
CFL-10460
CFL-11081
CFL-10634
CFL-11363
CFL-11417
W290
R331
ORI-11936
ORI-16395
R549
R548
R276
R277
R278
R279
R280
R053
HDW-16387
HDW-16388
HDW-16389
HDW-16390
HDW-16391
HDW-16392
HDW-16393
HDW-16396
Nozzles & Spoons
Teflon Screws
Nozzle, Double, Cap
Nozzle, Double Cap/8 mch parts
Nozzle, Double Cap/4” parts
Nozzle, Double Cap/4” parts
Nozzle, 1.5mm
Nozzle, 2mm
Spoon, Small
Spoon, Large
Nozzle, 2mm
Internal Mirrors
Output Mirror, 1.5” dia., 20Mcc/PL ZnSe, 30%R
Rear Mirror, 1.5” dia., 20Mcc/PL ZnSe, R> 99%
Si Mirror, 1.1” dia., PL/PL R> 99.8%
Cu Mirror, 1.1” dia., PL/PL R> 99.8%
Bend Mirror, Cu, 50mm x 9mm R> 99.8%
Output Mirror, 1.5” dia., 10 Mcc, ZnSe, 17%R
Bend Mirror, 60mm x 6mm 14Mcc, Cu, R> 99.8%
Output Mirror, 1.5” dia., 10Mcc/Plano ZnSe 30%R
External Mirrors
Focusing Lenses
Focusing Lens, 5” FL, 1.5”, ZnSe, PL/CX, 3mm
Focusing Lens, 7.5” FL, 1.5” dia., ZnSe PL/CX, AR/AR
Focusing Lens, 5” FL, 1.5” dia., ZnSe PL/CX, 8mm, AR/AR
Focusing Lens, 7.5” FL, 1.5” dia., ZnSe PL/CX, 8mm, AR/AR
Focusing Lens, 7.5” FL, 2” dia., ZnSe PL/CX, 8mm, AR/AR
Focusing Lens, 5” FL, 2” dia., ZnSe PL/CX, 8mm, AR/AR
Seals & O-Rings
O-Ring, Nozzle
Grease, Silicon, O-Ring, #R331
Connection Hardware
1 800 468 2326
408 321 8500
FAX: 408 321 8466
70
Sleeve, Outer, MOC, #R549
Sleeve, Inner, MOC, #R548
Tubing, Preformed PFA, #R276
Tubing, Unformed PFA, #R053
CO2 LASERS
PHOTON V108/V150, V505, V1200
Description
PHOTON V 108/
V150, V505, V1200
OEM P/N
DLI P/N
OP176201
OP176207
OP178313
OP176485
CMR-10094
CMR-10037
CMR-10049
CMR-10040
OP176201
OP176212
OP178313
OP176485
CMR-10094
CMR-10095
CMR-10049
CMR-10040
Fold Mirror, 1” dia. x 3mm 10Mcc/PL Si, EP
Fold Mirror, 1” dia. x 3mm 20Mcc/PL Si, PS
Fold Mirror, 1.5” dia. x 4mm PL/PL, Si
Fold Mirror, 1” dia., PL/PL, PS
Output Mirror, 1.0” dia., PL/PL, ZnSe, 18%R
Rear Mirror, 1” dia. x 3mm 10Mcc/PL, Ge R> 99.5%
Rear Mirror, 1.0” dia. x 3mm, 20Mcc/PL, Ge R>99.5%
Output Window, 1.0” x 3mm, PL/PL
OP176212
OP176214
OP176203
OP176201
OP178312
OP176485
OP178376
OP180344
CMR-10095
CMR-10714
CMR-10067
CMR-10094
CMR-10055
CMR-10040
CMR-10713
CMR-10063
ROFIN SINAR RS610, RS1200, RS1500/1700
Description
OEM P/N
DLI P/N
RS-610-0008-1
RS-610-0007-1
RS-610-1036-1
CMR-11400
CMR-11401
CMR-11398
403-813
403-814
n/a
n/a
CMR-10707
CMR-10708
CMR-10036
CMR-10699
403-813
403-814
403-817
CMR-10707
CMR-10708
CMR-11183
V108/V150 Mirrors
Fold Mirror, 1” dia. PL/PL, PS
Fold Mirror, 2” dia. X 5mm, EP
Output Mirror, 1” dia. x 3mm, 60%R ZnSe, PL/PL
V505 Mirrors
Fold Mirror, 1” dia. PL/PL, PS
Fold Mirror, 1” dia. x 3mm 10Mcc/PL Si, EP
Output Mirror, 1” dia. x 3mm, 60%R ZnSe, PL/PL
V1200 Mirrors
RS610 Mirrors
Output Coupler, 1.1” x .225” 30Mcc/30Mcx, ZnSe, 65%R
Rear Mirror, 1.1” x .255” PL, 99.5%R
Polarizer Mirror, 1.6” x .375” Si, 99.1% R
ROFIN SINAR
RS610, RS1200,
RS1500/1700
RS1200 Mirrors
Rear Mirror, 1.0” x .236” 15Mcc, Ge, 99.5%R
Fold Mirror, 2.0” x .200” Si, ES, 45 Degrees
Phase Shift/ 1/4 Wave Mirror 2.0” x .375, Si
RS1500/1700 Mirrors
Rear Mirror, 1.0” x .236” 15Mcc, Ge, 99.5%R
Fold Mirror, 2.0” x .236” Si, EP
1 800 468 2326
408 321 8500
FAX: 408 321 8466
71
CO2 LASERS
SPECTRA PHYSICS
SP810, SP820,
SP825, SP850,
SP971, SP975
1 800 468 2326
408 321 8500
FAX: 408 321 8466
72
SPECTRA PHYSICS SP810, SP820, SP825, SP850, SP971, SP975
Description
OEM P/N
DLI P/N
SP 810 Mirrors
Output Coupler, 1.0” x.200” 10Mcc/6Mcx ZnSe, 65%R
Rear Mirror 1.0” x .200” PL/PL, Ge, 99.5%R
Polarizer Mirror, 1.5” x .375” PL/PL, PO/ES, Si, 99.8%R
Phase Retarder Mirror, 1/4 Wave 2.0” x .375”, Si
810-0340
810-0420
971-2517-1
494-6011-3
CMR-10645
CMR-10640
CMR-10642
CMR-10699
SP820 Mirrors
Output Coupler Mounted, 1.1” x .225”, PL/PL, ZnSe, 48%R
Output Window Mounted, 1.5” x .236”, 20Mcc/PL, ZnSe
Rear Mirror, 2.0” x .375” 30Mcc/PL, Ge, 99.5%R
Polarizer Mirror, 2.0” x .375” PL/PL ES(Eliptical), Si
Phase Retarder, 1/4 Wave 2.0” x .375”, Si
820-3029-2
820-3037-1
820-3051-1
820-3091-1
494-6011-3
CMR-10648
CMR-10646
CMR-10649
CMR-10644
CMR-10699
Cooling Components
2604-0340
WFI-10784
SP825 Mirrors
Output Coupler, Mounted 2.0” x .300” 30Mcc/18Mcx ZnSe, 48%R
Output Window, Mounted 2.25” x .250” PL/PL, ZnSe
Rear Mirror, 2.5” x .372” PL/PL, Ge, 99.5%R
Polarizer Mirror, 2.0” x .375” PL/PL ES(Eliptical), Si
825-3003-1
825-3020-1
825-3021-1
820-3091-1
CMR-11065
CMR-11066
CMR-11067
CMR-10644
Rear Mirror w/ Polarized System
Rear Mirror, 2.0” x .375” 30Mcc/PL, Ge, 99.5%R
820-3051-1
CMR-10649
SP825 Mirrors
494-6011-3
CMR-10699
SP850 Mirror
Output Coupler, Mounted 2.0” x .300” 30Mcc/18Mcx ZnSe, 48%R
Output Window, Mounted 2.25” x .375”, PL/PL
Bend Mirror, 4.0”, Cu, EC
825-3003-1
851-0104-1
474-2004-1
CMR-11065
CMR-11197
CMR-10945
SP971 Mirror
Ouput Coupler, 1.1” x .220” PL/PL, ZnSe, 58%R
Rear Mirror, 1.1” x .200” 30Mcc, Si
Fold Mirror, 4.25” x 1.5” Cu, ES
Polarizer Mirror, 1.5” x .375” PL/PL, PO/ES, Si, 99.8%R
971-2364I
971-2345
973-2206-1
971-2517-1
494-6011-3
CMR-10643
CMR-10641
CMR-10652
CMR-10642
CMR-10699
SP975 Mirror
Output Coupler Mounted, 2.0” x .25” 30Mcc/40Mcx GaAs, 28%R
Rear Mirror, 2.0” x .375” 30Mcc, EP, Si
Fold Mirror, 4.25” x 1.5”
975-2247-1
973-2250-1
973-2206-1
CMR-11196
CMR-11208
CMR-10652
Pulsed Lamps
PULSED
LAMPS
DESCRIPTION
MANUFACTURER
APOLLO
LAMP, APOLLO 1610
LAMP, APOLLO 1630
PART NO.
LMP-10014
LMP-10079
AB/BAASEL
LAMP, AB/BAASEL/LPKF
LAMP, AB/BAASEL/LPKF, CDQ
CANDELA
LAMP, CANDELA, SPTL
LAMP, CANDELA LASER #9906-CN-27-7
CELL ROBOTICS
LAMP, CELL ROBOTICS, CUSTOM
COHERENT
LAMP, COHERENT M34, KRYPTON
LAMP, COHERENT M34, P1165
LAMP, COHERENT MEDICAL, VP SELECT
LAMP, COHERENT OMEGA
LAMP, COHERENT, 14”
LAMP, COHERENT, MODEL 11 & 14 GLASS
CONTROL
LAMP, CONTROL 400
CONVERGENT
LAMP, CONVERGENT P50/AURORA
EKSPLA
LAMP, EKSPLA LASER, P1194
LAMP, EKSPLA LASER, P1195
ELECTROX
LAMP, ELECTROX, 262-000-006
LAMP, ELECTROX, 5.5” ARC, 635-000-013
LAMP, ELECTROX, 5.5” ARC, 635-000-013, LOW IMPED
LAMP, ELECTROX, PULSED MARKER, 262-000-003
LAMP, ELECTROX, PULSED, 262-000-012
LAMP, ELECTROX, PULSED, 262-000-019
GSI LUMONICS
LAMP, LUMONICS JK701, LONG PULSE
LAMP, LUMONICS JK702, SCREENCUT
LAMP, LUMONICS MULTIWAVE
LAMP, LUMONICS/JK HYSERIES
LAMP, LUMONICS/JKMS20
LAMP, LUMONICS/JKMS330/830
LAMP, LUMONICS/JKMS330/830, QARC
LMP-12464
LMP-12505
LMP-12528
LMP-13854
LMP-12520
LMP-11097
LMP-11762
LMP-12529
LMP-10782
LMP-14793
LMP-10692
LMP-10013
LMP-12524
LMP-13611
LMP-13610
LMP-10006
LMP-10004
LMP-11073
LMP-10027
LMP-10002
LMP-10362
LMP-11563
LMP-12561
LMP-11453
LMP-11287
LMP-11201
LMP-10007
LMP-10016
LMP-10833
DESCRIPTION
MANUFACTURER
GSI LUMONICS (Continued)
LAMP, LUMONICS/JKMS701/702
LAMP, LUMONICS/JKMS704, SPECIAL
LAMP, LUMONICS/JK701, HIGH ENERGY
LAMP, LUMONICS, LUXSTAR
LAMP, LUMONICS, LUXSTAR, LOW POWER
HOBART
LAMP, HOBART, 3KW
HOYA
LAMP, HOYA MEMORY REPAIR
IQL30
LAMP, IQL30
KORAD
LAMP, KORAD KWD
LASAG
LAMP, LASAG, 64.0153
LAMP, LASAG, 64.0372, LOW IMPEDANCE
LAMP, LASAG, KOS-102
LASER INDUSTRIES
LAMP, LASER INDUSTRIES
LASERONICS
LAMP, LASERONICS 4900
LASERVALL
LAMP, LASERVALL PL15
LAMP, LASERVALL PL50
LEE
LAMP, LEE 650M
LPKF
LAMP, LPKF 800x800
PART NO.
LMP-11392
LMP-10485
LMP-11012
LMP-11408
LMP-11724
LMP-11421
LMP-12560
LMP-11857
LMP-13975
LMP-12031
LMP-10026
LMP-13053
LMP-10980
LMP-10809
LMP-11357
LMP-11022
LMP-10812
LMP-11551
LMP-11297
LMP-11674
LMP-12264
LMP-13916
LMP-11918
LMP-13246
LMP-10635
LMP-11632
LMP-13295
LMP-13296
LMP-12523
LMP-13353
1 800 468 2326
408 321 8500
FAX: 408 321 8466
73
Pulsed Lamps
PULSED
LAMPS
DESCRIPTION
MANUFACTURER
MBB
LAMP, MBB ML-2 LASER
PART NO.
LMP-12452
MLS
LAMP, MLS P500F
LMP-11219
NEC
LAMP, NEC P2014/2019
LAMP, NEC YL476A
LMP-12751
LMP-11410
NIHON
LAMP, NIHON
LMP-16281
QUANTA RAY
LAMP, QUANTA RAY DCR II, III
LAMP, QUANTA RAY, DCR I
QUANTEL
LAMP, QUANTEL
LAMP, QUANTEL 581C
LAMP, QUANTEL 611
LAMP, QUANTEL, 203-0019
LAMP, QUANTEL, 581-10 & 581-20
RAYTHEON
LAMP, RAYTHEON 347/384
LAMP, RAYTHEON 484
LAMP, RAYTHEON 500/550
LAMP, RAYTHEON 500/550, XENON
LAMP, ASSEMBLY, RAYTHEON SS500, REBUILD
LAMP, ASSEMBLY, RAYTHEON SS550
LAMP, ASSEMBLY, RAYTHEON SS550, REBUILD
ROFIN SINAR
LAMP, ROFIN SINAR, RS500
SHARPLAN
LAMP, SHARPLAN 2100
LAMP, SHARPLAN EPILIGHT
SLT
LAMP, SLT, CLMP
SPACE RAY
LAMP, SPACE RAY-136, W/O TRIGGER WIRE
THERMOLASE
LAMP, THERMOLASE SOFTLIGHT
TOSHIBA
LAMP, TOSHIBA, 300 WATT LASER
LAMP, TOSHIBA, LAY806
LAMP, TOSHIBA 150 WATT LASER
TRIMEDYNE
LAMP, TRIMEDYNE
TRUMPF/HAAS
LAMP, HAAS, HL703-HL3003
UNITEK MIYACHI
LAMP, UNITEK MIYACHI, LW10, LW15, LOW PULSE
LAMP, UNITEK MIYACHI, LW250, LW300
LAMP, UNITEK MIYACHI, LW51, LW52, LW100
LAMP, UNITEK MIYACHI, LW50A, LW70A
1 800 468 2326
408 321 8500
FAX: 408 321 8466
74
LMP-10852
LMP-10936
LMP-10983
LMP-10851
LMP-11218
LMP-11152
LMP-10068
LMP-10024
LMP-10029
LMP-10010
LMP-10012
LMP-14801
LMP-14767
LMP-14800
LMP-11193
LMP-11631
LMP-16325
LMP-12775
LMP-11730
LMP-16366
LMP-10025
LMP-11291
LMP-10904
LMP-16326
LMP-14527
LMP-13813
LMP-12098
LMP-11643
LMP-13052
CW Arclamps
CW
ARCLAMPS
DESCRIPTION
MANUFACTURER
AB/BAASEL
LAMP, AB/BAASEL 2000/6000, 20 AMP
LAMP, AB/BAASEL 2000/6000, 30 AMP
LAMP, AB/BAASEL LASER, CLC512
LAMP, AB/BAASEL LASER, NEW STYLE
LAMP, AB/BAASEL, 145 VOLTS
LAMP, AB/BAASEL, STARMARK 150
LAMP, AB/BAASEL LASER, 100 WATT
COHERENT
LAMP, COHERENT ANTARES
LAMP, COHERENT MARKER M815
LAMP, COHERENT/KIGRE, MODEL 7000-9000
CONTROL
LAMP, CONTROL 258/520
LAMP, CONTROL 258/520, W/GOLD COATED ENDS
LAMP, CONTROL 2660
LAMP, CONTROL 510
LAMP, CONTROL 510 (OLD)
LAMP, CONTROL 512
LAMP, CONTROL 612, 50 WATT
LAMP, CONTROL 632
LAMP, CONTROL ELITE, 100 WATT
LAMP, CONTROL INSIGNA/ICON
LAMP, HIGH POWER, CONTROL 258/520
COOPER
LAMP, COOPER 2500
CRAWFORD
LAMP, CRAWFORD
ELECTROX
LAMP, ELECTROX, 120 WATT
LAMP, ELECTROX, DC ARC, 75 WATT
LAMP, ELECTROX, HV, 75 WATT
ESI
LAMP, ESI 3570
LAMP, ESI 3570, LOW VOLTAGE
FANUC
LAMP, FANUC
FOBA
LAMP, FOBA, 100 WATT
LAMP, FOBA, 200 WATT
FUJI
LAMP, FUJI MARKER
KORAD
LAMP, KORAD KY3
LAMP, KORAD KY-5
LASER OPTRONICS
LAMP, LASER OPTRONICS, MODEL 747/757
LASER PHOTONICS
LAMP, LASER PHOTONICS
LAMP, LASER PHOTONICS, NL504
LASERTRONICS
LAMP, LASERTRONICS, METALASE
LASERVALL
LAMP, LASERVALL VALMARK 7
LEE
LAMP, LEE LASER, 718
LAMP, LEE LASER, 20A
PART NO.
LMP-12704
LMP-13023
LMP-10495
LMP-11288
LMP-14406
LMP-14040
LMP-11139
LMP-11064
LMP-10008
LMP-16327
LMP-10022
LMP-11726
LMP-10019
LMP-10021
LMP-10496
LMP-10018
LMP-11539
LMP-11272
LMP-10598
LMP-12435
LMP-10717
LMP-14817
LMP-13502
LMP-10001
LMP-10003
LMP-10005
LMP-10015
LMP-11407
LMP-14520
LMP-14366
LMP-14799
LMP-11420
LMP-10009
LMP-10020
LMP-11883
LMP-11741
LMP-12055
DESCRIPTION
MANUFACTURER
LEE (Continued)
LAMP, LEE LASER, 30A
LAMP, LEE LASER, 8250M
LAMP, LEE LASER, LOW VOLTAGE
PART NO.
LMP-10328
LMP-13793
LMP-10842
LPKF
LAMP, LPKF, SL25
MUNICH
LAMP, MUNICH LASER MODEL 35
NEC
LAMP, NEC SL114
LAMP, NEC SL115
LAMP, NEC P2015A
PMI
LAMP, PMI, ARC, KRYPTON
QUANTRAD / LASERMETRICS
LAMP, QUANTRAD 9555
LAMP, LASERMETRICS 95150
LAMP, LASERMETRICS 9560
QUANTRONIX
LAMP ASSEMBLY, QUANTRONIX 114
LAMP ASSEMBLY, QUANTRONIX 116
LAMP ASSEMBLY, QUANTRONIX 116, LONG LIFE
LAMP, QUANTRONIX 114
LAMP, QUANTRONIX 114, LONG LIFE
LAMP, QUANTRONIX DRS
ROFIN SINAR
LAMP, ROFIN SINAR, MARKER, NEW
LAMP, ROFIN SINAR, MARKER, OLD
SCHWARTZ
LAMP, SCHWARTZ
SLT
LAMP, SLT
SPECTRA PHYSICS
LAMP, SPECTRA PHYSICS, MERLIN
SPECTRON
LAMP, SPECTRON
LAMP, SPECTRON F950-4
LAMP, SPECTRON SL502/503/902/903
LAMP, SPECTRON, F410-4
TRUMPF/HAAS
LAMP, HAAS, HL703-HL3003
UNITEK MIYACHI
LAMP, UNITEK MIYACHI, LM45
U.S. LASER
LAMP, US LASER, 500 WATT
LAMP, US LASER, 750 WATT
LMP-16280
LMP-11889
LMP-11586
LMP-11507
LMP-16302
LMP-10531
LMP-10696
LMP-11717
LMP-11249
LMP-10964
LMP-10776
LMP-11416
LMP-10017
LMP-11117
LMP-10023
LMP-11000
LMP-10147
LMP-11326
LMP-11126
LMP-13535
LMP-12526
LMP-12527
LMP-13409
LMP-12331
LMP-12550
LMP-11866
LMP-13061
LMP-13209
LMP-12488
LMP-16300
LMP-13062
LMP-11801
LMP-14211
LMP-14796
LMP-12810
LMP-11074
LMP-10449
1 800 468 2326
408 321 8500
FAX: 408 321 8466
75
LAMP
CONNECTION
HARDWARE
DESCRIPTION
MANUFACTURER
AB BAASEL
BLOCK, TERMINAL, LAMP, ASSEMBLY, AB/BAASEL
LAMP, CLAMP, ASSEMBLY, AB/BAASEL LASER
LAMP CONTACT, SET, NEW STYLE, AB/BAASEL
APOLLO
LEAD, LAMP, DOUBLE-ENDED, APOLLO 1610
LEAD, LAMP, SINGLE-ENDED, APOLLO 1610
KIT, LAMP, FLOW TUBE, INSULATOR, APOLLO 1610
COHERENT
BLOCK, TERMINAL, LAMP, COHERENT M34
CONNECTOR, LAMP, COHERENT/OMEGA
NUT, PLASTIC, LAMP CONNECTOR/OMEGA
LAMP TERMINAL, ASSEMBLY, COHERENT M34
RETAINING NUT, FLOW TUBE, ROD, COHERENT M34
SPACER, FLOW TUBE, ROD, COHERENT M34
CONTROL
BLOCK, TERMINAL, LAMP, CONTROL 258/520
BLOCK, TERMINAL, LAMP, CONTROL 510/512
CLAMP, LAMP, CONTROL 612/SCRIPT, SIGNATURE
CLIP, LAMP, CONTROL 258/520
CLIP, LAMP, CONTROL 510/512/612
CONNECTOR, LAMP, HV, CONTROL 400
CONNECTOR, ARC LAMP, TENSION, CONTROL
HOLDER, ARC LAMP EXTENSION, CONTROL 400
HOLDER, ARC LAMP, CONTROL 400
INSULATOR, TRIGGER CONTACT, LAMP, CONTROL 400
KIT, HV, CONTROL 510/512
LAMP CONTACT, TRIGGER, CONTROL 400
LIFTER, LAMP, CONTROL 612/SCRIPT, SIGNATURE
PIN, HV CONNECTOR, CONTROL 510/512
V-BLOCK, LAMP, CONTROL
V-BLOCK, LAMP, CONTROL 612 PLUS (100 WATT)
ESI
BLOCK, TERMINAL, LAMP, ESI
CLIP, LAMP, ESI 3570
KORAD
STRAP, CONNECTOR, KORAD KWD
1 800 468 2326
408 321 8500
FAX: 408 321 8466
76
PART NO.
LCH-12522
LCH-11086
LCH-11870
LCH-11071
LCH-11072
LCH-10397
LCH-10991
LCH-11455
LCH-11456
LCH-10992
LCH-14529
LCH-14528
LCH-10727
LCH-10173
LCH-13917
LCH-10172
LCH-10171
LCH-10282
LCH-10177
LCH-10178
LCH-10176
LCH-10283
LCH-10140
LCH-10398
LCH-13784
LCH-10139
LCH-11216
LCH-13486
LCH-10944
LCH-10175
LCH-11779
DESCRIPTION
MANUFACTURER
LEE LASER
BLOCK, TERMINAL, LAMP, LEE LASER, 708/712/715/718
CONNECTOR, ARC LAMP, TENSION, LEE
HV PIN, LEE LASER 818
LAMP, CONTACT BLOCK, LEFT, LEE LASER 818
LAMP, CONTACT BLOCK, RIGHT, LEE LASER 818
LAMP, CONTACT, ASSEMBLY, LEE LASER
LAMP, CONT ASSEMBLY, CATHODE, LEE LASER 8250M
LAMP, CONTACT ASSEMBLY, ANODE, LEE LASER 8250M
LAMP, CONTACT BLOCK, LEFT, LEE LASER, 808/812
LAMP, CONTACT BLOCK, RIGHT, LEE LASER, 808/812
LAMP, TERMINAL BLOCK, LEFT, LEE LASER, 808/812
LAMP, TERMINAL BLOCK, RIGHT, LEE LASER, 808/812
LAMP, TERMINAL BLOCK, LEFT, LEE LASER 818
LAMP, TERMINAL BLOCK, RIGHT, LEE LASER818
QUANTRAD/LASERMETRICS
BLOCK, TERMINAL, LAMP, LASERMETRICS 9555
CLIP, LAMP, BASE, LASERMETRICS 9530
CLIP, LAMP
QUANTRONIX
CABLE, ANODE/CATHODE, QUANTRONIX114/116
SOCKET, ANODE, QUANTRONIX
SOCKET, CATHODE, QUANTRONIX 114
SOCKET, CATHODE, QUANTRONIX 116/117/118
THREADED RETAINER (LOCK RING), QUANTRONIX
WASHER, PRESSURE (PRESSURE RING)
RAYTHEON
BLOCK, FLOW TUBE, SS, RAYTHEON SS550, FRONT
BLOCK, FLOW TUBE, SS, RAYTHEON SS550, REAR
BLOCK, INSULATOR, LAMP, DELRIN, RAYTHEON SS550
CONNECTOR, LAMP, GRND, RAYTHEON SS550
CONNECTOR, LAMP, HV, RAYTHEON SS550
CONNECTOR, LAMP, SET, RAYTHEON SS500
KIT, INSULATOR, LAMP, RAYTHEON SS500
LAMP, ENDPLATE, RAYTHEON SS550
NUT, LAMP, RAYTHEON SS550
SPACER, LAMP, TEFLON, RAYTHEON SS500/550
WIRE, LAMP, SET, RAYTHEON SS500
UNITEK MIYACHI
HOLDER, LAMP,W/O CLIPS, UNITEK MIYACHI, LW51, LW52, LW100
PART NO.
LCH-11227
LCH-10177
LCH-14876
LCH-14877
LCH-14875
LCH-10338
LCH-13797
LCH-13796
LCH-14857
LCH-14855
LCH-14858
LCH-14856
LCH-14878
LCH-14874
LCH-11255
LCH-11210
LCH-10175
LCH-11660
LCH-10486
LCH-10487
LCH-10631
LCH-10507
LCH-10508
LCH-11511
LCH-11512
LCH-11215
LCH-11124
LCH-11123
LCH-10399
LCH-10133
LCH-11220
LCH-11356
LCH-11888
LCH-11533
LCH-12554
Flow Tubes
FLOW TUBES
DESCRIPTION
MANUFACTURER
AB BAASEL
FLOW TUBE, LAMP/ROD
FLOW TUBE, LAMP/ROD, CERIUM DOPED
APOLLO
FLOW TUBE, LAMP, APOLLO 1610
FLOW TUBE, LAMP, APOLLO 1630
FLOW TUBE, ROD, APOLLO 1610
COHERENT
FLOW TUBE, 11mm, COHERENT M815
FLOW TUBE, LAMP, COHERENT M34/OMEGA
FLOW TUBE, ROD, COHERENT M34/OMEGA
CONTROL
FLOW PLATES/FILTER GLASS, CONTROL 400
FLOW TUBE, LAMP, CONTROL 257
FLOW TUBE, LAMP, CONTROL 258 (OLD STYLE)
FLOW TUBE, LAMP, CONTROL 258/520
FLOW TUBE, LAMP, CONTROL 2660/530
FLOW TUBE, LAMP, CONTROL 510
FLOW TUBE, LAMP, ELITE 100 WATT
FLOW TUBE, LAMP, CONTROL INSIGNIA/ICON
FLOW TUBE, LAMP/ROD, CONTROL 512
FLOW TUBE, LAMP/ROD, CONTROL 512/612, FROSTED
FLOW TUBE, ROD, CONTROL 258/520
FLOW TUBE, ROD, CONTROL 2660/530/630
ELECTROX
FLOW PLATES/FILTER GLASS, ILM
FLOW TUBE, LAMP, ILM 271-003-004, CDQ
FLOW TUBE, LAMP, ILM RAYMARKER
FLOW TUBE, LAMP, ILM, 271-003-004, SAMARIUM
ESI
FLOW TUBE, LAMP/ROD, ESI
GSI LUMONICS
FLOW TUBE, ROD, 8MM, LUMONICS MULTIWAVE
FLOW TUBE, ROD, LUMONICS JKMS830/701
FLOW TUBE, ROD, LUMONICS/JKMS702/703
FLOW TUBE, ROD, PYREX, JK702/703
FLOW TUBE, ROD, CDQ, LUMONICS JK701/702
FLOW TUBE, LAMP, LUMO/HOBART
FLOW TUBE, ROD, LUMO/HOBART
KORAD
FLOW TUBE, LAMP, LG BORE, KORAD KY5
FLOW TUBE, ROD, KORAD KWD
LASAG
FLOW TUBE, LAMP, LASAG, 300 SERIES
FLOW TUBE, LAMP, LASAG, KLS016-126
FLOW TUBE, LAMP, LASAG KLS321
FLOW TUBE, LAMP, LASAG LAK400-401
FLOW TUBE, ROD, LASAG, 300 SERIES
FLOW TUBE, ROD, LASAG, KLS016-126
FLOW TUBE, ROD, LASAG LAK400-401
LASER OPTRONICS
FLOW TUBE, LAMP, LASER OPTRONICS 747/757
FLOW TUBE, LAMP/ROD, LASER OPTRONICS MLS35
FLOW TUBE, ROD, LASER OPTRONICS 757
LEE LASER
FLOW TUBE, LAMP, LEE LASER, 3.4”
FLOW TUBE, LAMP, LEE LASER, 4.4”
FLOW TUBE, LAMP, LEE LASER 650
FLOW TUBE, LAMP, LEE LASER, 8250M
FLOW TUBE, ROD, DOPED, LEE LASER 808/812
FLOW TUBE, ROD, LEE LASER
PART NO.
FLT-10130
FLT-14952
FLT-10131
FLT-10726
FLT-10190
FLT-10774
FLT-10973
FLT-11714
FLT-10134
FLT-10126
FLT-10191
FLT-10132
FLT-10908
FLT-10128
FLT-10873
FLT-13544
FLT-10130
FLT-12513
FLT-10159
FLT-10909
FLT-10994
FLT-12929
FLT-10530
FLT-11734
FLT-10127
FLT-14358
FLT-11727
FLT-14785
FLT-14956
FLT-14032
FLT-16346
FLT-16345
FLT-13397
FLT-11011
FLT-14926
FLT-14936
FLT-11780
FLT-14920
FLT-14927
FLT-14937
FLT-14921
FLT-11885
FLT-11878
FLT-11886
FLT-10450
FLT-11161
FLT-14963
FLT-13794
FLT-14854
FLT-10451
DESCRIPTION
MANUFACTURER
LEE LASER (Continued)
FLOW TUBE, ROD, LEE LASER 818, SAMARIUM DOPED
FLOW TUBE, ROD, LEE LASER, 4.4”
FLOW TUBE, ROD, LEE LASER 650
FLOW TUBE, ROD, LEE LASER, 8250M
PMI
FLOW TUBE, PMI/AEGIS LASER
POSITIVE LIGHT
FLOW TUBE, ASSEMBLY, LAMP, EG & G, POSITIVE LIGHT
FLOW TUBE, ASSEMBLY, LAMP, HER, POSITIVE LIGHT
FLOW TUBE, LAMP, LASERMETRICS 9555
FLOW TUBE, LAMP/ROD, LASERMETRICS 9550
FLOW TUBE, ROD, LASERMETRICS 9530
FLOW TUBE, ROD, LASERMETRICS 9555
QUANTRONIX
FLOW TUBE, ASSEMBLY, LAMP, QUANTRONIX 116
FLOW TUBE, ASSEMBLY, LAMP, QUANTRONIX 117
FLOW TUBE, ASSEMBLY, LAMP, QUANTRONIX 118, LONGLIFE
FLOW TUBE, ASSEMBLY, ROD, QUANTRONIX 114
FLOW TUBE, LAMP, QUANTRONIX 114/116
FLOW TUBE, LAMP, QUANTRONIX 114/116, REPAIR
FLOW TUBE, LAMP, QUANTRONIX 117
FLOW TUBE, LAMP, QUANTRONIX 118
RAYTHEON
FLOW TUBE, LAMP, RAYTHEON SS347
FLOW TUBE, LAMP, RAYTHEON 380
FLOW TUBE, LAMP, 484
FLOW TUBE, ROD, RAYTHEON 380
FLOW TUBE, ROD, RAYTHEON 484
FLOW TUBE, ROD, RAYTHEON SS500
ROFIN SINAR
FLOW TUBE, LAMP, ROFIN SINAR P500Y
TRUMPF/HAAS
FLOW TUBE, LAMP
FLOW TUBE, ROD, (HL700-HL1500)
FLOW TUBE, ROD (HL2000-HL4000)
WINDOW, VIEWING, INFRARED, HAAS LASER
UNITEK MIYACHI
FLOW TUBE, LAMP, UNITEK MIYACHI, LW51, LW52, LW100
FLOW TUBE, LAMP, UNITEK MIYACHI, LW50A, LW70A
FLOW TUBE, LAMP, UNITEK MIYACHI, LW250, LW300
FLOW TUBE, LAMP, UNITEK MIYACHI, LW400
FLOW TUBE, ROD, UNITEK MIYACHI, LW51, LW52, LW100
FLOW TUBE, ROD, UNITEK MIYACHI, LW50A, LW70A
FLOW TUBE, ROD, UNITEK MIYACHI, LW250, LW300
FLOW TUBE, ROD, UNITEK MIYACHI, LW400
FLOW PLATE, LASER, UNITEK MIYACHI, LW10, LW15
PART NO.
FLT-14873
FLT-11162
FLT-14964
FLT-13795
FLT-10573
FLT-12906
FLT-11537
FLT-10711
FLT-10298
FLT-10996
FLT-10712
FLT-12380
FLT-12565
FLT-13663
FLT-10963
FLT-10933
FLT-11199
FLT-11355
FLT-10137
FLT-11641
FLT-11104
FLT-11154
FLT-13717
FLT-10396
FLT-10319
FLT-10136
FLT-10135
FLT-10339
FLT-10379
FLT-10125
FLT-11358
FLT-16266
FLT-16267
FLT-16268
FLT-10946
FLT-12553
FLT-14990
FLT-12552
FLT-14997
FLT-13009
FLT-14991
FLT-13023
FLT-14998
FLT-13011
1 800 468 2326
408 321 8500
FAX: 408 321 8466
77
Cavities
CAVITIES
DESCRIPTION
MANUFACTURER
APOLLO
CAVITY, REPLATE, APOLLO 1610
CAVITY, R/E, APOLLO 1610
AB BAASEL
CAVITY, ASSEMBLY, AB/BAASEL LASER 6000
CAVITY, ASSEMBLY, AB/BAASEL LASER
CAVITY, ELLIPSE, AB/BAASEL
CAVITY, ENDPLATE, GOLD, AB/BAASEL2000/6000
CAVITY, ENDPLATE, LOWER, AB/BAASEL LASER
CAVITY, ENDPLATE, UPPER, AB/BAASEL LASER
CAVITY, ENDPLATE, TEFLON, AB/BAASEL 2000/6000
TEFLON LIGHT SHIELD, AB/BAASEL 2000/6000
TEFLON LIGHT SHIELD, AB/BAASEL 600
COHERENT
CAVITY, ASSEMBLY, COHERENT M34
CAVITY, BOTTOM, REPLATE, COHERENT M34
CAVITY, ENDPLATE, SET, COHERENT M34
CAVITY, REFLECTOR, MODULE, COHERENT MODEL 11/14
CAVITY, REPLATE, COHERENT M34
CAVITY, TOP, REPLATE, COHERENT M34
CONTROL
CAVITY, ASSEMBLY, CONTROL 258/520
CAVITY, ASSEMBLY, CONTROL 2660/530
CAVITY, ASSEMBLY, CONTROL 400
CAVITY, BOTTOM, CONTROL 400
CAVITY, ELLIPSE, CONTROL 100W
CAVITY, ELLIPSE, CONTROL 258/520
CAVITY, ELLIPSE, CONTROL 510
CAVITY, ELLIPSE, CONTROL 512/612
CAVITY, ELLIPSE, CONTROL SIGNATURE 612 PLUS
CAVITY, ELLIPSE.CONTROL 2660/530
CAVITY, END PLATE, LEFT, CONTROL 2660/530
CAVITY, ENDPLATE, BOTTOM, CONTROL 400
CAVITY, ENDPLATE, CONTROL 510/512
CAVITY, ENDPLATE, LEFT, LOWER, CONTROL 258/520
CAVITY, ENDPLATE, LEFT, UPPER, CONTROL 258/520
CAVITY, ENDPLATE, RIGHT, CONTROL 2660/530
CAVITY, ENDPLATE, RIGHT, LOWER, CONTROL 258/520
CAVITY, ENDPLATE, RIGHT, UPPER, CONTROL 258/520
CAVITY, ENDPLATE, TOP, CONTROL 400
CAVITY, LIGHT SHIELD, LEFT, CONTROL 258/520
CAVITY, LIGHT SHIELD, LOWER, CONTROL 510/512
CAVITY, LIGHT SHIELD, RIGHT, CONTROL 258/520
CAVITY, LIGHT SHIELD, UPPER, CONTROL 510/512
CAVITY, LIGHTSHIELD, LOWER, CONTROL 100W
CAVITY, LIGHTSHIELD, UPPER, CONTROL 100W
CAVITY, R/E, CONTROL 400
CAVITY, REPLATE, CONTROL 400
CAVITY, TOP, CONTROL 400
ELECTROX
CAVITY, REPLATE, ILM RAYMARKER
1 800 468 2326
408 321 8500
FAX: 408 321 8466
78
PART NO.
DESCRIPTION
CAV-10795
CAV-10320
CAVITY, ASSEMBLY, ESI
CAVITY, ELLIPSE, TOP/BTM, ESI
CAVITY, ENDPLATE, LEFT, LOWER, ESI3570
CAVITY, ENDPLATE, LEFT, UPPER, ESI3570
CAVITY, ENDPLATE, RIGHT, LOWER ESI3570
CAVITY, ENDPLATE, RIGHT, UPPER, ESI3570
GSI LUMONICS/HOBART
CAVITY, ELLIPSE, LUMO/HOBART
CAVITY, ENDPLATE, LUMO/HOBART
CAVITY, REPLATE, LUMO/HOBART
CAVITY, REPLATE, ENDPLATE, LUMO/HOBART
LASAG
CAVITY, ENDPLATE, LEFT, LASAG 312, 322
CAVITY, ENDPLATE, LEFT, LASAG, 301-302, 321
CAVITY, ENDPLATE, LEFT, LASAG, KLS016-126
CAVITY, ENDPLATE, LEFT, LASAG, LAK 400-401
CAVITY, ENDPLATE, RI, LASAG, 301-302, 321
CAVITY, ENDPLATE, RI, LASAG, 312, 322
CAVITY, ENDPLATE, RIGHT, LASAG, KLS016-126
CAVITY, ENDPLATE, RIGHT, LASAG, LAK 400-401
CAVITY, LASAG, 34.0411
CAVITY, LOWER, LASAG, 301-302, 321
CAVITY, LOWER, LASAG, 312, 322
CAVITY, LOWER, LASAG, KLS016-126
CAVITY, LOWER, LASAG, LAK 400-401
CAVITY, REPLATE, LASAG, KLS126
CAVITY, UPPER, LASAG, LAK 400-401
CAVITY, UPPER, KLS016-126
CAVITY, UPPER, LASAG, 301-302, 321
CAVITY, UPPER, LASAG, 312, 322
LEE LASER
CAVITY, ASSEMBLY, LEE LASER 708
CAVITY, ELLIPSE, LEE LASER
CAVITY, ELLIPSE, LEE LASER
CAVITY, ENDPLATE, LEFT, UPPER, LEE LASER
CAVITY, ENDPLATE, LOWER LEFT, LEE LASER
CAVITY, ENDPLATE, LOWER LEFT, LEE LASER 818
CAVITY, ENDPLATE, LOWER RIGHT, LEE LASER 808/812
CAVITY, ENDPLATE, LOWER RIGHT, LEE LASER 818
CAVITY, ENDPLATE, RIGHT, UPPER, LEE LASER
CAVITY, ENDPLATE, UPPER LEFT, LEE LASER 818
CAVITY, ENDPLATE, UPPER RIGHT, LEE LASER 818
CAVITY, ENDPLATE, UPPER, LEFT, LEE LASER
CAVITY, ENDPLATE, UPPER, RIGHT, LEE LASER
CAVITY, LIGHT SHIELD, LOWER, LEE LASER 712
CAVITY, LIGHT SHIELD, UPPER, LEE LASER712
TEFLON LIGHT SHIELD, LOWER LEFT, LEE LASER 818
TEFLON, LIGHT SHIELD, UPPER LFT, LEE LASER 818
TEFLON, LIGHT SHIELD, LOWER LEFT, LEE LASER
TEFLON, LIGHT SHIELD, LOWER LEFT, LEE LASER
TEFLON, LIGHT SHIELD, LOWER R, LEE LASER 715/718
CAV-14775
CAV-11816
CAV-14893
CAV-14899
CAV-11830
CAV-11829
CAV-14900
CAV-14896
CAV-14892
CAV-11075
CAV-10972
CAV-11076
CAV-12387
CAV-10633
CAV-10971
CAV-10180
CAV-10913
CAV-10174
CAV-10183
CAV-10181
CAV-10411
CAV-14829
CAV-10179
CAV-10184
CAV-10182
CAV-12921
CAV-10914
CAV-10915
CAV-10413
CAV-10185
CAV-11109
CAV-11107
CAV-10916
CAV-11108
CAV-11110
CAV-10412
CAV-10381
CAV-10189
CAV-10382
CAV-10188
CAV-14831
CAV-14830
CAV-11465
CAV-11023
CAV-10410
CAV-11748
MANUFACTURER
ESI
PART NO.
CAV-10953
CAV-10813
CAV-11092
CAV-10803
CAV-11093
CAV-10802
CAV-16352
CAV-16353
CAV-16354
CAV-16355
CAV-14929
CAV-14928
CAV-14938
CAV-14924
CAV-14932
CAV-14933
CAV-14940
CAV-14925
CAV-14191
CAV-14930
CAV-14931
CAV-14939
CAV-14922
CAV-14948
CAV-14923
CAV-14941
CAV-14934
CAV-14935
CAV-11032
CAV-11031
CAV-13156
CAV-11226
CAV-14841
CAV-11225
CAV-14861
CAV-14880
CAV-14862
CAV-14881
CAV-11233
CAV-14884
CAV-14882
CAV-14864
CAV-14863
CAV-11236
CAV-11237
CAV-14879
CAV-14883
CAV-11235
CAV-14860
CAV-14839
Cavities / Head Blocks
CAVITIES
DESCRIPTION
MANUFACTURER
TEFLON, LIGHT SHIELD, UPPER LEFT, LEE LASER
TEFLON, LIGHT SHIELD, UPPER LT, LEE LASER
TEFLON, LIGHT SHIELD, UPPER RT, LEE LASER
CAVITY, ASSEMBLY, LASERMETRICS 9530
CAVITY, ELLIPSE, BTM, LASERMETRICS 9530
CAVITY, ELLIPSE, LASERMETRICS 9555
CAVITY, ELLIPSE, TOP, LASERMETRICS 9530
CAVITY, ENDPLATE, LEFT, LASERMETRICS 9530
CAVITY, ENDPLATE, LEFT, LASERMETRICS 9555
CAVITY, ENDPLATE, RIGHT, LASERMETRICS 9530
CAVITY, ENDPLATE, RIGHT, LASERMETRICS 9555
QUANTRONIX
CAVITY, ASSEMBLY, QUANTRONIX 114
CAVITY, ENDPLATE, QUANTRONIX 114/116/117
CAVITY, ENDPLATE, QUANTRONIX 118
CAVITY, REFL HLDR, TOP, QUANTRONIX 114
CAVITY, REFL HLDR, TOP, QUANTRONIX 117
CAVITY, REFL HOLDR, BTM, QUANTRONIX 114
PART NO.
CAV-14865
CAV-14840
CAV-11234
CAV-11279
CAV-10779
CAV-10823
CAV-11212
CAV-11026
CAV-11211
CAV-11061
CAV-11252
CAV-11060
CAV-11253
CAV-10960
CAV-10965
CAV-11333
CAV-11345
CAV-10929
CAV-11348
CAV-10961
CAV-11334
CAV-10962
CAV-10967
CAV-11335
DESCRIPTION
MANUFACTURER
QUANTRONIX (Continued)
CAVITY, REFL HOLDR, BTM, QUANTRONIX 118 HIGH POWER
CAVITY, REFL HOLDR, TOP, QUANTRONIX 116
CAVITY, REFL HOLDR, TOP, QUANTRONIX 118
CAVITY, REFL HOLDR, TOP, QUANTRONIX 118 HIGH POWER
CAVITY, REFLECTOR, QUANTRONIX 114
RAYTHEON
CAVITY, ASSEMBLY, RAYTHEON SS500
CAVITY, ENDPLATE, SET, RAYTHEON SS500
CAVITY, HOUSING, LOWER, RAYTHEON SS500
CAVITY, R/E, RAYTHEON SS500
CAVITY, R/E, RAYTHEON SS500, W/THK. ENDPLATES
CAVITY, REPLATE, RAYTHEON SS500
ROFIN SINAR
CAVITY, REPLATE, ROFIN SINAR P500Y
TRUMPF/HAAS
CAVITY, ASSEMBLY, TRUMPF/HAAS, HL703-4006
CAVITY, R/E, TRUMPF/HAAS, HL703-4006
CAVITY, REPLATE, ELLIPSE, TRUMPF/HAAS
UNITEK MIYACHI
FLOW TUBE UPPER HOLDER, LEFT, LW50A/70A
FLOW TUBE UPPER HOLDER, RIGHT, LW50A/70A
FLOW TUBE HOLDER, LW400
PART NO.
CAV-11347
CAV-12273
CAV-10966
CAV-11346
CAV-12274
CAV-10932
CAV-10930
CAV-11336
CAV-11247
CAV-10187
CAV-10186
CAV-12420
CAV-10600
CAV-14826
CAV-10632
CAV-11360
CAV-16693
CAV-16336
CAV-16316
CAV-14990
CAV-14991
CAV-14996
HEAD BLOCKS
DESCRIPTION
MANUFACTURER
AB BAASEL
HEAD BLOCK, BOTTOM, AB LASER/COMP 3
HEAD BLOCK, BOTTOM, AB/BAASEL LASER
HEAD BLOCK, LOWER, AB/BAASEL 2000/6000
HEAD BLOCK, TOP, AB/BAASEL LASER
HEAD BLOCK, UPPER, BAASEL 2000/6000
HEAD, ASSEMBLY, AB/BAASEL
HEAD, HEAT SINK, AB/BAASEL
APOLLO
HEAD BLOCK, BOTTOM, APOLLO 1610
HEAD BLOCK, TOP, APOLLO 1610
CONTROL
BUSHING, END, CONTROL 400
BUSHING, PLATE, HOLD, CONTROL 400
BUSHING, SUPPORT, CONTROL 400
CAP, INSULATING, CONTROL 500
CARRIAGE, HEAD, CONTROL 258/520
CARRIAGE, HEAD, CONTROL 400
PART NO.
HBA-12616
HBA-11083
HBA-14901
HBA-11084
HBA-14902
HBA-12624
HBA-14894
HBA-11650
HBA-11649
HBA-10845
HBA-10847
HBA-10949
HBA-10355
HBA-11245
HBA-10970
HBA-10149
DESCRIPTION
MANUFACTURER
CLAMP, RING, CRYSTAL, CONTROL 500
HEAD BLOCK, BOTTOM, CONTROL 258/520
HEAD BLOCK, BOTTOM, CONTROL 2660/530
HEAD BLOCK, BOTTOM, CONTROL 400
HEAD BLOCK, CENTER, CONTROL 400
HEAD BLOCK, LOWER, CONTROL 100W
HEAD BLOCK, TOP, CONTROL 258
HEAD BLOCK, TOP, CONTROL 2660/530
HEAD BLOCK, UPPER, CONTROL 100W
HEAD, BOLT, CONTROL 500
HEAD CARRIAGE, CONTROL 612
PART NO.
HBA-10150
HBA-10237
HBA-10322
HBA-10910
HBA-10194
HBA-10196
HBA-10198
HBA-11463
HBA-10193
HBA-14833
HBA-10574
HBA-10911
HBA-10192
HBA-10195
HBA-10197
HBA-11462
HBA-14834
HBA-10347
HBA-14945
1 800 468 2326
408 321 8500
FAX: 408 321 8466
79
Head Blocks
HEAD BLOCKS
DESCRIPTION
MANUFACTURER
CONTROL (Continued)
HEAD, ASSEMBLY, CONTROL 510
HEAD, ASSEMBLY, CONTROL 512
HEAD, DUST SHIELD, CRYSTAL CLAMP, CONTROL 510
HEAD, HEAT SINK, CONTROL 100W
HEAD, HEAT SINK, CONTROL 258/520
HEAD, HEAT SINK, CONTROL 510
HEAD, DUST SHIELD, MIRROR MT, CONTROL 510/512
KIT, HV, CONTROL 258/520
KNOB, INSULATOR, CONTROL 400
LOCKING PLATE, CONTROL 400
LOCKING PLATE, CONTROL 500
SPACER, INSULATING, CONTROL 500
SPACER, NYLON, .5”, CL20/21
TUBE, ROD GUIDE, CONTROL 258/520
TUBE, ROD GUIDE, CONTROL 510/512
ESI
CAP, ROD, COMPRESSION, ESI
HEAD BLOCK, BOTTOM, ESI
HEAD BLOCK, TOP, ESI
HEAD, ASSEMBLY, ESI
PIN, HV CONNECTOR, ESI
TUBE, ROD GUIDE, ESI
LEE LASER
CARRIAGE, HEAD, LEE LASER
CARRIAGE LOCKING ASSEMBLY
CLAMP, RING, ROD, LEE LASER
DUST BOOT, LEE LASER 808/812
DUST BOOT, LEE LASER 718
DUST BOOT, LEE LASER 818
HEAD BLOCK, LOWER, LEE LASER 808/812
HEAD BLOCK, UPPER, LEE LASER 818
HEAD BLOCK, BOTTOM, LEE LASER 708
HEAD BLOCK, BOTTOM, LEE LASER 712
HEAD BLOCK, LOWER, LEE LASER 818
HEAD BLOCK, TOP, LEE LASER 708/712
HEAD BLOCK, UPPER, LEE LASER 715/718
HEAD BLOCK, UPPER, LEE LASER 808/812
HEAD, DUST SHIELD, LEE LASER
HEAD, HEAT SINK, LEE LASER 715/718
HEAD, HEAT SINK, LEE LASER 808/812
HEAD, HEAT SINK, LEE LASER 818
HEAD, HEAT SINK, TOP, LEE LASER
HV PIN, LEE LASER 808/812
1 800 468 2326
408 321 8500
FAX: 408 321 8466
80
PART NO.
HBA-10363
HBA-10364
HBA-10358
HBA-14835
HBA-11244
HBA-10912
HBA-10348
HBA-10349
HBA-10238
HBA-10728
HBA-10814
HBA-10798
HBA-10357
HBA-10356
HBA-10639
HBA-11243
HBA-10241
HBA-10943
HBA-10777
HBA-10925
HBA-10954
HBA-10941
HBA-10942
HBA-11228
HBA-14846
HBA-11231
HBA-14866
HBA-14843
HBA-14885
HBA-14869
HBA-14891
HBA-11030
HBA-11286
HBA-14889
HBA-11029
HBA-14850
HBA-14872
HBA-11232
HBA-14849
HBA-14871
HBA-14890
HBA-11223
HBA-14859
DESCRIPTION
MANUFACTURER
LOWER HEAD BLOCK
LOWER HEAD CARRIAGE
LOWER HEAD CARRIAGE, LEE LASER 808/812
LOWER HEAD CARRIAGE, LEE LASER 818
PIN, HV CONNECTOR, LEE LASER
ROD GUIDE, LEE LASER 818
ROD, END CAP, LEE LASER 818
ROD, GUIDE, LONG, LEE LASER 808/812
ROD, GUIDE, SHORT, LEE LASER 808/812
TUBE, ROD GUIDE, LEE LASER
POSITIVE LIGHT
HEAD BLOCK, BOTTOM, CW HEAD, POSITIVE LIGHT
HEAD BLOCK, TOP, CW HEAD, POSITIVE LIGHT
CARRIAGE, HEAD, LASERMETRICS 9555
CLAMP, RING, CRYSTAL, LASERMETRICS 9555
HEAD BLOCK, BOTTOM, LASERMETRICS 9530
HEAD BLOCK, BOTTOM, LASERMETRICS 9555
HEAD BLOCK, TOP, LASERMETRICS 9530
HEAD BLOCK, TOP, LASERMETRICS 9555
HEAD, DUST SHIELD, LASERMETRICS 9555
HEAD, HEAT SINK, LASERMETRICS 9555
PIN, HV CONNECTOR, LASERMETRICS 9555
TUBE, ROD GUIDE, LASERMETRICS 9555
QUANTRONIX
ASSEMBLY, HEAD, QUANTRONIX 117, LESS ROD
BLOCK, INLET, WATER, QUANTRONIX 114
HEAD BLOCK, BOTTOM, QUANTRONIX 114/116
HEAD BLOCK, BOTTOM, QUANTRONIX 117/118
HEAD BLOCK, TOP, QUANTRONIX 114/116
HEAD BLOCK, TOP, QUANTRONIX 117/118
HEAD, ASSEMBLY, QUANTRONIX 116, W/LONG LIFE LAMP
PLATE, END, LAMP, QUANTRONIX
PLATE, PRESSURE, CRYSTAL, QUANTRONIX
PLATE, PRESSURE, LAMP, QUANTRONIX
SLEEVE, LIGHT SHIELD, QUANTRONIX 114
UNITEK MIYACHI
ACRYLIC TOP ASSEMBLY, LW50A/70A
ACRYLIC TOP ASSEMBLY, LW400
PART NO.
HBA-14848
HBA-14847
HBA-14868
HBA-14888
HBA-11246
HBA-14887
HBA-14886
HBA-14870
HBA-14867
HBA-11230
HBA-13956
HBA-13957
HBA-11261
HBA-11257
HBA-11059
HBA-11027
HBA-11058
HBA-11250
HBA-11258
HBA-11251
HBA-11262
HBA-11256
HBA-11759
HBA-11057
HBA-11009
HBA-11337
HBA-10897
HBA-11340
HBA-10898
HBA-11342
HBA-11194
HBA-11051
HBA-11056
HBA-11052
HBA-11053
HBA-11054
HBA-11338
HBA-11350
HBA-14987
HBA-14995
Nd:YAG Rods
Nd:YAG RODS
DESCRIPTION
MANUFACTURER
PART NO.
AB BAASEL
ROD, ASSEMBLY, AB/BAASEL 2000/6000
ROD-14898
ROD HOLDER W/CAP, AB/BAASEL 2000/6000
ROD-14897
HOLDER, 4mm ROD, (W/CAP)
ROD-10154
ROD, YAG, 4mm x 79mm
ROD-10143
ROD, YAG, 4mm x 79mm, MOUNTED
ROD-10498
ROD, RWK, 3-5mm
ROD-10567
APOLLO
ROD, YAG, 1/4” x 4.0”, MOUNTED, APOLLO 1610
ROD-10791
ROD, R/E, APOLLO 1610
ROD-10796
COHERENT
ROD, YAG, 10mm x 6”, COHERENT M34
ROD-10407
ROD, ASSEMBLY, MOUNTED, COHERENT M34/OMEGA
ROD-13208
ROD, GLASS, 6.35mm x 357.2mm, COHERENT MODEL 11 ROD-12773
REBUILD, MODULE, COHERENT MODEL 11/14 GLASS
ROD-11120
HOLDER, 4mm ROD(W/CAP), COHERENT M815
ROD-11049
KIT, HOLDER, ROD, COHERENT M34/OMEGA
ROD-12265
ROD, RWK, COHERENT MODEL 11/14 GLASS
ROD-12383
ROD, RWK/RMT, COHERENT M34
ROD-10979
ROD, RWK, 7-10mm
ROD-10650
CONTROL
ROD, YAG, 3mm x 79mm, CONTROL 258/520
ROD-10142
ROD, YAG, 3mm x 79mm, MOUNTED, CONTROL 258/520
ROD-10619
ROD, YAG, 4mm x 54mm, CONTROL 510
ROD-10141
ROD, YAG, 4mm x 54mm, MOUNTED, CONTROL 510
ROD-10497
ROD, YAG, 4mm x 79mm, CONTROL 512
ROD-10143
ROD, YAG, 4mm x 79mm, MOUNTED, CONTROL 512
ROD-10498
ROD, YAG, 4mm x 105mm, CONTROL 612 {100W}
ROD-11294
ROD, YAG, 4mm x 105mm, MOUNTED, CONTROL 612 {100W}ROD-11293
ROD, YAG, 1/4” x 4-1/8”, CONTROL 2660/530
ROD-11412
ROD, YAG, 1/4” x 4-1/8”, MOUNTED, CONTROL 2660/530 ROD-11414
ROD, YAG, 3/8” x 4.5”, CONTROL 400
ROD-10146
ROD, YAG, 3/8” x 4.5”, MOUNTED, CONTROL 400
ROD-10500
ROD, RWK, CONTROL 400, MOUNTED
ROD-12466
ROD, RWK, 3-5mm
ROD-10567
ROD, RWK, 3-5mm, CONTROL 510/512/612, MOUNTED
ROD-10617
ROD, RWK, 7-10mm
ROD-10650
CAP, ROD, CONTROL 400
ROD-10801
HOLDER, 4mm ROD, (W/CAP), CONTROL 510/512
ROD-10154
HOLDER, ROD, CONTROL 400
ROD-10800
HOLDER, ROD (W/CAP), CONTROL 2660/530
ROD-11413
HOLDER, ROD (W/CAP), CONTROL 400
ROD-10156
HOLDER, ROD (W/CAP), CONTROL 520
ROD-10152
ELECTROX
ROD, YAG, 1/4” x 4 .5”
ROD-10939
ROD, YAG, 1/4” x 4.0”
ROD-10145
ROD, YAG, 1/4” x 6.5”, 120W
ROD-11192
ROD, RWK, 6mm-.25”
ROD-10683
DESCRIPTION
MANUFACTURER
ESI
ROD, YAG, 3mm x 79mm, ESI 3570
ROD, YAG, 3mm x 79mm, MOUNTED, ESI
ROD, YAG, 3mm x 79mm, MOUNTED, ESI 3570, R/E
ROD, YAG, 3mm x 85mm, ESI
ROD, YAG, 3mm x 85mm, MOUNTED, ESI
ROD, RWK, 3-5mm
HOLDER, 3mm ROD (W/CAP), ESI 3570 SERIES
FOBA
ROD, YAG, 4mm x 116mm, FOBA
GSI LUMONICS
ROD, YAG, 1/4” x 6-1/4”, LUMONICS JK702/703/820
ROD, YAG, 3/8” x 6-1/4”, LUMONICS JK701/704 & MS330/830
ROD, YAG, 3/8” x 6-1/4”, LUMONICS JK701 HCR
ROD, YAG, 3/8” x 6-1/4”, MOUNTED, LUMONICS, MS330/830
ROD, YAG, 8mm x 193mm, .5Mcc, LUMO MULTIWAVE
ROD, YAG, 6.35mm x 210mm, LUMO/HOBART
ROD, R/E, LUMONICS JK701/704
ROD, R/E, LUMONICS MULTIWAVE
ROD, RWK, REMOUNT, LUMONICS JK330/830
ROD, RWK, 6mm-.25”, JK702/703
ROD, RWK, 7-10mm, JK701/704/MULTIWAVE
HDW, ROD, 3/8” DIA, LUMONICS JKMS330/830, FLANGE END
HDW, ROD, 3/8” DIA, LUMONICS JKMS330/830, SRT. END
LASAG
ROD, 1/4” x 3”, LASAG
ROD, YAG, 1/4” x 6”, LASAG
LASER OPTRONICS
ROD, ASSEMBLY, LASER OPTRONICS 757
ROD, YAG, MLS35, LASER OPTRONICS
LEE LASER
ROD, YAG, 3mm x 79mm, LEE LASER 712 TQ, MOUNTED
ROD, YAG, 4mm x 108mm, LEE LASER 718/818
ROD, YAG, 4mm x 108mm, MOUNTED, LEE LASER 818
ROD, YAG, 4mm x 79mm, MOUNTED, LEE LASER
ROD, RWK, 3-5mm
ROD, RWK, 3-5mm, MOUNTED
ROD, END CAP, LEE LASER
HOLDER, 4mm ROD(W/CAP), LEE LASER
HOLDER, 4mm ROD(W/CAP), LEE LASER, LONG
HOLDER, 4mm ROD(W/CAP), LEE LASER, SHORT
HOLDER, 4mm ROD, (W/CAP), LEE LASER 818
PART NO.
ROD-10142
ROD-10499
ROD-11745
ROD-13973
ROD-13989
ROD-10567
ROD-10743
ROD-14730
ROD-11207
ROD-10722
ROD-14827
ROD-11178
ROD-12869
ROD-16339
ROD-11670
ROD-12870
ROD-10723
ROD-10683
ROD-10650
ROD-12391
ROD-12390
ROD-14942
ROD-13894
ROD-11884
ROD-11879
ROD-10142
ROD-10619
ROD-14908
ROD-12555
ROD-14224
ROD-11317
ROD-10143
ROD-10498
ROD-10567
ROD-10617
ROD-14842
ROD-11316
ROD-12329
ROD-12328
ROD-14223
1 800 468 2326
408 321 8500
FAX: 408 321 8466
81
Nd:YAG Rods
Nd:YAG RODS
DESCRIPTION
MANUFACTURER
ROD, YAG, 4mm x 54mm, MOUNTED, LASERMETRICS 9530
ROD, YAG, 5mm x 79mm, W/-1Mcc, LASERMETRICS 9555
HOLDER, ROD(W/CAP), 4mm, LASERMETRICS
HOLDER, ROD(W/CAP), 5mm, LASERMETRICS
QUANTRONIX
ROD, YAG, 3mm x 65mm, QUANTRONIX
ROD, YAG, 3mm x 65mm, MOUNTED, QUANTRONIX 114
ROD, YAG, 3mm x 79mm, -1Mcc, QUANTRONIX
ROD, YAG, 3mm x 104mm QUANTRONIX 117
ROD, R/E, 3mm x 65mm, MOUNTED, QUANTRONIX 114
ROD, R/E, 3mm x 79mm, W/-1Mcc, MOUNTED,
QUANTRONIX 116/TER118
ROD, YAG, 4mm x 79mm, QUANTRONIX 116
ROD, YAG, 4mm x 79mm, HI-DOPED
ROD, YAG, 4mm x 79mm, MOUNTED, QUANTRONIX 116
ROD,YAG, 4mm x 79mm, MOUNTED,QUANTRONIX 116,HI-DOPED
ROD, R/E, YAG, 4mm x 79mm, MOUNTED, QUANTRONIX 116
ROD, YAG, 6.3mm x 104mm, QUANTRONIX 117
ROD, YAG, 6.3mm x 104mm, MOUNTED, QUANTRONIX 117
ROD, YAG, 7mm x 146mm, MOUNTED, QUANTRONIX 118,
OTARI TMD
ROD, R/E, QUANTRONIX 118, OTARI TMD
ROD, RWK, QUANTRONIX 114/116, MOUNTED
ROD, RWK, QUANTRONIX 117/118, MOUNTED
KIT, ROD MOUNT, QUANTRONIX 114, 3mm
KIT, ROD MOUNT, QUANTRONIX 116, 4mm
KIT, ROD MOUNT, QUANTRONIX 117, 6.35mm
KIT, ROD MOUNT, QUANTRONIX 118
HARDWARE, ROD FLOW TUBE, QUANTRONIX 117
RAYTHEON
ROD, YAG, 5/16” x 6”, RAYTHEON SS500
ROD, YAG, 1/4” x 3.7”, AR/35%R, RAYTHEON SS347
ROD, YAG, 3/8” x 6”, RS P500Y, RAYPD460
ROD, YAG, 3/8” x 3.5”, RAYTHEON 480
ROD, ASSEMBLY, MOUNTED, RAYTHEON SS500
1 800 468 2326
408 321 8500
FAX: 408 321 8466
82
PART NO.
ROD-10976
ROD-10977
ROD-10978
ROD-10935
ROD-10974
ROD-10975
ROD-10144
ROD-10934
ROD-11319
ROD-14944
ROD-11324
ROD-11521
ROD-10143
ROD-11222
ROD-10670
ROD-11221
ROD-11419
ROD-11344
ROD-11343
ROD-11331
ROD-11452
ROD-10616
ROD-10938
ROD-10959
ROD-10669
ROD-11200
ROD-11153
ROD-12257
ROD-10408
ROD-13718
ROD-10577
ROD-10409
ROD-10679
DESCRIPTION
MANUFACTURER
RAYTHEON (Continued)
ROD, R/E, RAYTHEON SS500
ROD, RWK, 7-10mm
ROD, RWK/RMNT, RAYTHEON SS500
KIT, HOLDER, ROD, RAYTHEON SS500
ROFIN SINAR
ROD, RWK, 7-10mm
TERADYNE
ROD, YAG, 3mm x 79mm, -1Mcc, TDYNE118
ROD, YAG, 3mm x 79mm, MOUNTED, TDYNE118
ROD, R/E, 3mm x 79mm, W/-1Mcc, MOUNTED, TER118
TRUMPF/HAAS
ROD, YAG, TRUMPF/HAAS, HL2000-HL4000
UNITEK MIYACHI
ROD, YAG, 6.35mm x 87mm, 1.1% Nd, UNITEK MIYACHI
ROD, YAG, 7mm x 127mm, 1.1%, Nd, UNITEK MIYACHI
ROD, YAG, 8mm x 87MM, 1.1%, UNITEK MIYACHI
ROD, YAG, 8mm x 112mm, 1.1% Nd, UNITEK MIYACHI
ROD, YAG, 10mm x 110mm, 1.1%, Nd, UNITEK MIYACHI
US LASER
ROD, YAG, 1/4” x 8.70”, W/-1Mrc, US LASER
ROD, YAG, 1/4” x 8.70”, MOUNTED, US LASER
HOLDER, 1/4” ROD(W/CAP), US LASER
MISCELLANEOUS
ROD, YAG, 4mm x 85mm, PL/PL
ROD, YAG, 4mm x 79mm, HI-DOPED
ROD, YAG, 5mm x 79mm, PL/PL
ROD, RWK, 3-5mm
ROD, RWK, 3-5mm, MOUNTED
ROD, RWK, 6mm-.25”
ROD, RWK, 7-10mm
ROD, RWK, 7-10mm, POLISH ONLY
PART NO.
ROD-10570
ROD-10650
ROD-10678
ROD-10856
ROD-10650
ROD-11319
ROD-11289
ROD-11521
ROD-16273
ROD-13978
ROD-14992
ROD-13024
ROD-13979
ROD-14993
ROD-13022
ROD-14995
ROD-14046
ROD-11940
ROD-13020
ROD-14207
ROD-14205
ROD-14209
ROD-11859
ROD-11222
ROD-13789
ROD-13595
ROD-10567
ROD-10617
ROD-10683
ROD-10650
ROD-14786
Nd:YAG Lens Protectors
Nd:YAG LENS
PROTECTORS
DESCRIPTION
PROTECTOR, LENS, 4.0” x 4.0” x .25”, CTD
PROTECTOR, LENS, 3.25” DIA, .125”, CTD
PROTECTOR, LENS, 2.5” x 1.5” x .125” THK, CTD
PROTECTOR, LENS, 2.5” x 1.5” x .062”, UNC
PROTECTOR, LENS, 2.44” DIA, .120” THK, UNC
PROTECTOR, LENS, 2.4” DIA, UNC
PROTECTOR, LENS, 2.25” x .045”, UNC
PROTECTOR, LENS, 2.12” DIA, .040”, UNC
PROTECTOR, LENS, 2.0” x 3.0” x .045”, UNC
PROTECTOR, LENS, 2.0” DIA, .062”, UNC, PYREX
PROTECTOR, LENS, 2.0” DIA, 2mm, FS, CTD
PROTECTOR, LENS, 2.0” DIA, .062”, UNC, G1 QTZ
PROTECTOR, LENS, 1.5” DIA, .125”, FS, V-COAT
PROTECTOR, LENS, 1.5” DIA, .062”, V-COAT
PROTECTOR, LENS, 1.25” DIA. x .125” THK.V-COAT
PROTECTOR, LENS, 1.1” DIA, .062”, V-COAT
PART NO.
LPR-10504
LPR-10491
LPR-10221
LPR-10490
LPR-11721
LPR-14777
LPR-14780
LPR-10096
LPR-11763
LPR-11474
LPR-10990
LPR-16269
LPR-10484
LPR-10536
LPR-10448
LPR-10515
LPR-11281
LPR-12784
LPR-12728
LPR-14737
LPR-11791
LPR-13245
LPR-10101
LPR-10104
LPR-11753
LPR-10106
LPR-10582
LPR-10097
LPR-10100
LPR-10103
LPR-11630
LPR-14959
LPR-10099
LPR-10102
LPR-11794
DESCRIPTION
PROTECTOR, LENS, 1.0” DIA, .062” THK, UNC
PROTECTOR, LENS, .880” DIA, .162”, V-COAT
PROTECTOR, LENS, .950” DIA, .045”, UNC
PROTECTOR, LENS, .939” DIA, .045”, W/O HOLDER
PROTECTOR, LENS, .939” DIA, .045”, UNC, W/HOLD
PROTECTOR, LENS, .625” DIA, .063”, UNC
PROTECTOR, LENS, 75mm DIA, 1.75mm, V-COAT
PROTECTOR, LENS, 75mm DIA, .068”, CTD
PROTECTOR, LENS, 55mm DIA, 1.5mm, V-CTD, HAAS
PROTECTOR, LENS, 54mm DIA, .048”, UNC, LUMO
PROTECTOR, LENS, 54mm DIA, 1mm, V-COAT
PROTECTOR, LENS, 50mm DIA, CTD, 1mm THK
PROTECTOR, LENS, 50mm DIA, .125”, CTD
PROTECTOR, LENS, 50mm DIA, .120”, BK7, V-COAT
PROTECTOR, LENS, 50mm DIA, UNC, 1mm DIA
PROTECTOR, LENS, 46mm DIA, 1mm, CTD
PROTECTOR, LENS, 41mm DIA, 1mm, UNC, LUMO
PROTECTOR, LENS, 38mm, 4mm, CTD
PROTECTOR, LENS, 38mm DIA, 1mm, UNC, LUMO
PROTECTOR, LENS, 30mm DIA, 4.7mm, G1, UNC
PROTECTOR, LENS, 30mm DIA, 4.7mm, BF, UNC
PROTECTOR, LENS, 30mm DIA, 2mm, UNC, LASAG
PROTECTOR, LENS, 30mm DIA, 2mm ET, V-COAT
PROTECTOR, LENS, 30mm DIA, 1.6mm, V-CTD, HAAS
PROTECTOR, LENS, 30mm DIA, 1mm, UNC, UNITEK
PROTECTOR, LENS, 28.5mm DIA, 1mm, UNC, LUMO
PROTECTOR, LENS, 27mm DIA, 2mm, V-CTD, HAAS
PROTECTOR, LENS, 25mm DIA, 4mm THK, V-COAT
PROTECTOR, LENS, 25mm DIA, 1.6mm, V-COAT
PROTECTOR, LENS, 20mm DIA, .045”, UNC
PROTECTOR, LENS, CAMERA, ROUND, UNC, HAAS
PROTECTOR, LENS, CAMERA, RECTANGLE, UNC, HAAS
WINDOW, QUARTZ, 5.900” DIA, .590”, UNC
WINDOW, 1.0” DIA, .062”, V-COAT
PART NO.
LPR-11873
LPR-11349
LPR-14756
LPR-10105
LPR-13807
LPR-13918
LPR-11661
LPR-14412
LPR-14699
LPR-14795
LPR-13808
LPR-14808
LPR-14982
LPR-11404
LPR-13804
LPR-14981
LPR-12564
LPR-13955
LPR-12489
LPR-14816
LPR-14731
LPR-14986
LPR-11757
LPR-11760
LPR-16289
LPR-13081
LPR-13954
LPR-16290
LPR-12791
LPR-13196
LPR-13631
LPR-16257
LPR-16258
LPR-12897
LPR-16347
1 800 468 2326
408 321 8500
FAX: 408 321 8466
83
Nd:YAG Lenses
Nd:YAG
LENSES
DESCRIPTION
MANUFACTURER
AB/BAASEL
BEAM EXPANDER, AB, 2X-8X
COHERENT M34
LENS, UPCOLLIMATOR, INPUT, COHERENT M34
LENS, UPCOLLIMATOR, OUTPUT, COHERENT M34
CONTROL
LENS, 4.0” FL, 1.1” DIA
LENS, 6.0” FL, 1.1” DIA
LENS, UPCOLLIMATOR, 2X, CONTROL 400
LENS, UPCOLLIMATOR, 2X, INPUT, CONTROL 400
LENS, UPCOLLIMATOR, 2X, OUTPUT, CONTROL 400
LENS, UPCOLLIMATOR, INPUT, CONTROL, 100W
DIOPTER
LENS, 6 DIOPTER, 1.5”, GLASS, BI/CX
ELECTROX
LENS, UPCOLLIMATOR, 263-000-004
LENS, UPCOLLIMATOR, INPUT, -100mm FL
LENS, UPCOLLIMATOR, INPUT, RAYMARKER
LENS, UPCOLLIMATOR, OUTPUT, RAYMARKER
LENS, UPCOLLIMATOR, OUTPUT, 50.8mm
ESI
LENS, 50mm FL, 20mm, BK7, PL/CX, ESI
GSI LUMONICS
LENS, ASSEMBLY, DOUBLET, LUMONICS, P59Y9390X
LENS, ASSEMBLY, SINGLET, LUMONICS, P59R6180X
LENS, DOUBLET, LUMONICS, P59Y9390X
LENS, SINGLET, LUMONICS, P59R6180X
LENS, 5.0” FL, 1.0” DIA
LENS, 10” FL, 1.0” DIA
LENS, INPUT, ASSEMBLY, LUMO #P44Y6420X
LENS, 80mm, BET, MTD, LUMO #P44Y6420Y
LENS, -150mm FL, 50.8mm, FS, PL/CC,LUMO/HOBART
LENS, 50.2mm FL, 25.4mm, FS, PL/CX,LUMO/HOBART
LENS, -75mm FL, 25.4mm, FS, PL/CC, LUMO/HOBART
LENS, 100mm FL, 25.4mm, FS, PL/CX, LUMO/HOBART
LASAG
LENS, -55mm FL, 30mm, SF4, BI/CC, LASAG
QUANTRONIX
LENS, 48mm FL, QUANTRONIX 600 SERIES
QUANTRAD
LENS, UPCOLLIMATOR, INPUT, QUANTRAD
LENS, UPCOLLIMATOR, OUTPUT, QUANTRAD
RAYTHEON
LENS, 2.0” FL, 1.1” DIA
LENS, 3.0” FL, 1.1” DIA
LENS, 4.0” FL, 1.1” DIA, BI/CX
LENS, 4.0” FL, 1.1” DIA, PL/CX
LENS, 5.0” FL, 1.1” DIA
1 800 468 2326
408 321 8500
FAX: 408 321 8466
84
PART NO.
DESCRIPTION
YFL-11472
LENS, 6.0” FL, 1.1” DIA
LENS, 8.0” FL, 1.1” DIA
LENS, 2.5” FL NEG, 1.1” DIA
YFL-10920
YFL-10921
YFL-10083
YFL-10085
YFL-11050
YFL-10098
YFL-10327
YFL-11393
YFL-11274
YFL-10664
YFL-10854
YFL-11160
YFL-11669
YFL-11007
YFL-11008
YFL-11663
YFL-11323
YFL-13791
YFL-13790
YFL-13818
YFL-13817
YFL-11792
YFL-11770
YFL-16331
YFL-16303
YFL-16342
YFL-16343
YFL-16344
YFL-16359
YFL-16360
YFL-16361
YFL-12920
YFL-10747
YFL-10931
YFL-10903
YFL-10081
YFL-10082
YFL-10083
YFL-14787
YFL-10084
MANUFACTURER
RAYTHEON (Continued)
ROFIN SINAR
LENS, 120mm FL, 50mm, ACHROMAT
SPECTRA PHYSICS
MOUNT HARDWARE, SPECTRA PHYSICS 971, OC
MOUNT HARDWARE, SPECTRA PHYSICS 971, RM
TRUMPF/HAAS
LENS, COLLIMATOR, ASSEMBLY, MONO, HAAS
LENS, COLLIMATOR, HAAS #1
LENS, COLLIMATOR, HAAS #2
LENS, FOCUS, 27mm DIA, 2.05mm AT, HAAS #2
LENS, FOCUS, 27mm DIA, 5.1mm AT, HAAS #1
LENS, FOCUS, ASSEMBLY, 70mm FL, HAAS #1
UNITEK MIYACHI
LENS, 70mm FL, 30mm, GRADIUM, UNITEK MIYACHI
LENS, 100mm FL, 30mm, UNITEK MIYACHI
LENS, 120mm FL, 30mm, UNITEK MIYACHI
LENS, 120mmFL, 30mm DIA, PL/CX, BK7, UNITEK MIYACHI
LENS, 70mm FL, 30mm DIA, BK7, PL/CX, UNITEK MIYACHI
LENS, 80mm FL, 30 mm DIA, BK7, PL/CX, UNITEK MIYACHI
MISCELLANEOUS
LENS, 12.0” FL, 1.1”, BK7, PL/CX
LENS, 12.0” FL, 1.5”, BK7, PL/CX
LENS, 10.0” FL, 1.0”, BK7, PL/CX
LENS, 10.0” FL, 1.1”, FS, PL/CX
LENS, 10.0” FL, 1.5”, BK7, PL/CX
LENS, 10.0” FL, 1.5”, FS, BI/CX
LENS, 10.0” FL, 1.5”, FS, PL/CX
LENS, 10.0” FL, 2.0”, FS, PL/CX
LENS, 10.0” FL, 2.0”, FS, PL/CX, 1% FL
LENS, 9.0” FL, 1.5”, FS, PL/CX
LENS, 9.0” FL, 1.5”, BK7, PL/CX
LENS, 8.0” FL, 1.5”, FS, BI/CX
LENS, 8.0” FL, 1.5”, BK7, PL/CX
LENS, 8.0” FL, 1.0”, GLASS, PL/CX
LENS, 7.0” FL, 1.5”, BK7, PL/CX
LENS, 6.0” FL, 2.0”, BK7, PL/CX
LENS, 5.0” FL, 1.5”, BK7, PL/CX
LENS, 5.0” FL, 1.1” DIA, FS, BI/CX
LENS, 5.0” FL, 1.0”, BK7, PL/CX
PART NO.
YFL-10085
YFL-10086
YFL-10087
YFL-11325
YFL-10655
YFL-10656
YFL-14755
YFL-14753
YFL-14754
YFL-14751
YFL-14750
YFL-14752
YFL-13157
YFL-12782
YFL-12781
YFL-13891
YFL-12785
YFL-13147
YFL-14792
YFL-14791
YFL-11770
YFL-10716
YFL-14790
YFL-10403
YFL-14042
YFL-10864
YFL-10423
YFL-13953
YFL-11037
YFL-11362
YFL-10402
YFL-11036
YFL-10086
YFL-12509
YFL-11035
YFL-10725
YFL-10501
YFL-11775
YFL-11361
YFL-10085
YFL-10511
YFL-13443
YFL-11776
YFL-10084
YFL-11792
YFL-10112
Nd:YAG Lenses
Nd:YAG
LENSES
DESCRIPTION
MANUFACTURER
MISCELLANEOUS (Continued)
LENS, 4.0” FL, 1.75”, FS, PL/CX
LENS, 4.0” FL, 1.5”, BK7, PL/CX
LENS, 4.0” FL, 1.1”, PL/CX, 1.8mm THK.
LENS, 4.0” FL, 1.1”, FS, PL/CX, 532nm
LENS, 4.0” FL, 1.1”, FS, BI/CC, AR/[email protected]
LENS, 4.0” FL, 1.0”, FS, PL/CX, AR/AR@532
LENS, 3.0” FL, 1.5”, BK7, PL/CX
LENS, 3.0”FL, 1.1”, FS, PL/CX, YAG/GREEN
LENS, 2.5” FL, 1.1”, FS, PL/CC, NEG.
LENS, 2.0” FL, 1.1”DIA
LENS, 2.0” FL, 1.5”, BK7, PL/CX
LENS, 2.0” FL, 1.1”, FS, PL/CX, YAG/GREEN
LENS, 2.0” FL, 1.1”, FS, PL/CX, 532nm
LENS, 300mm FL, 1.5”, FS, PL/CX
LENS, 300mm FL, 50mm, B270, PL/CX
LENS, 200mm FL, 1.0”, BK7, PL/CX
LENS, 200mm FL, 50mm, B270, BI/CX
LENS, 200mm FL, 30mm, BK7, UNC
LENS, 200mm FL, 1.5” DIA, PL/CX, FS
LENS, 200mm FL, 50mm, FS, BI/CX
LENS, 160mm FL, 50mm DIA, ACHROMAT
LENS, 150mm FL, 30mm DIA, PL/CX, BK7, AR CTD.
PART NO.
YFL-10111
YFL-10092
YFL-11034
YFL-10089
YFL-14787
YFL-10088
YFL-14362
YFL-10083
YFL-10091
YFL-10108
YFL-10493
YFL-14789
YFL-11461
YFL-10082
YFL-10087
YFL-10081
YFL-11033
YFL-11460
YFL-14361
YFL-12301
YFL-10258
YFL-14712
YFL-10869
YFL-13423
YFL-14738
YFL-10705
YFL-16322
YFL-14172
YFL-13158
YFL-11062
YFL-12402
YFL-12776
DESCRIPTION
MANUFACTURER
LENS, 120mm FL, 50mm, GRADIUM
LENS, 120mm FL, 50mm, ACHROMAT, V-COAT
LENS, 120mm FL, 19mm, BK7, PL/CX
LENS, 120mm FL, 30mm, BK7, PL/CX, UNC
LENS, 100mm FL, 31.5mm, ACHROMAT
LENS, 100mm FL, 50.8mm DIA, BK7, BI/CX
LENS, 90mm FL, 50mm, B270, PL/CX
LENS, 80mm FL, 31.5mm, ACHROMAT
LENS, 80mm FL, 50mm, ACHROMAT, ARHS, CTD
LENS, 68mm FL, 1”, CG, BI/CX
LENS, 50.8mm, SQ., CYLINDRICAL
LENS, 50mm FL, 30mm DIA, GRADIUM SINGLET
LENS, 50mm FL, TRIPLET
LENS, 50mm FL, 25.4, FS, PL/CX, AR/[email protected] & 532
LENS, NEGATIVE 50mm FL, 1.0’, BK7, BI/CC
LENS, 45.3mm FL, 25.4mm DIA, DCX, AR
LENS, -25mm FL, 1.0”, FS, BI/CC
LENS, -150mm FL, 1.0”, BK7, PL/CC
LENS, SCANNING
LENS, UPCOLL 2X, INPUT, Ge, SPECIAL
LENS, UPCOLL 2X, OUTPUT, Ge, SPECIAL
LENS, UPCOL, OUTPUT, 50.8mm, +200MM FL
MOUNT, LENS, ASSEMBLY, 1.1”, YAG
PART NO.
YFL-13185
YFL-16320
YFL-11325
YFL-12904
YFL-12995
YFL-13079
YFL-12582
YFL-12710
YFL-11578
YFL-16306
YFL-11320
YFL-11846
YFL-10520
YFL-11467
YFL-11078
YFL-16291
YFL-12905
YFL-10724
YFL-13612
YFL-12518
YFL-12662
YFL-10589
YFL-14220
YFL-12500
YFL-13184
YFL-16296
YFL-13820
YFL-11118
YFL-11119
YFL-14825
YFL-11180
1 800 468 2326
408 321 8500
FAX: 408 321 8466
85
Nd:YAG Mirrors
Nd:YAG
MIRRORS
DESCRIPTION
MANUFACTURER
AB BAASEL
MIRROR, FRONT, 0.75” DIA, 0.375”, 80%R
MIRROR, FRONT, 0.75” DIA, 0.375”, 80%R=1Mcc
MIRROR, FRONT, 0.75” DIA, 0.375”, YAG/GREEN
MIRROR, REAR, 0.75” DIA, 0.375”, 100%R
COHERENT
BEAMSPLITTER, 3%, COHERENT M34
MIRROR, OUTPUT, 30%R, COHERENT M34
MIRROR, POLARIZER, 2.0” DIA, .250” THK, M34
MIRROR, REAR, COHERENT M34
MIRROR, REAR, COHERENT M34 W/POWERMETER
CONTROL
MIRROR, DICHROIC, 1.5” DIA, 45 DEG.
MIRROR, DICHROIC, 3.0” DIA, HR
MIRROR, FRONT, 2.0” DIA, FOLDCAV, CONTROL 400
MIRROR, REAR, 0.75” DIA, 0.375”, 100%R
MIRROR, REAR, 2.0” DIA, FOLDCAV, CONTROL 400
PRISM, 2” x 2” x 2”, CONTROL 400
PRISM, ASSEMBLY, HeNe, CONTROL
WINDOW, VIEWING, CONTROL INSTAMARK
MOUNT, MIRROR, CONTROL 500
ELECTROX
MIRROR, FRONT, 1” DIA, .25”, 50%R, ILM
MIRROR, GALVO, RECT., MOUNTED, ILM, 631-000-222
MIRROR, GALVO, RECTANGULAR, ILM, 631-000-022
MIRROR, GALVO, ROUND, ILM, 631-000-014
MIRROR, GALVO, ROUND, MOUNTED, ILM, 631-000-014
MIRROR, REAR, 0.75” DIA, 0.375”, 100%R, AR
MIRROR, REAR, 1” DIA, .25”, HR, ILM
MOUNTING, GALVO MIRRORS, ILM
WINDOW, PROTECTIVE, ILM, 632-000-005
ESI
MIRROR, REAR, 0.75” DIA, 0.375”, 100%R
MIRROR, REAR, 0.75” DIA, 0.375”, HR, 2Mcx
GSI LUMONICS
MIRROR, ASSEMBLY, TURNING, LUMONICS, 1222070YA
MIRROR, BEND, LUMONICS JK #2
MIRROR, BEND, LUMONICS JK#1
MIRROR, DICHROIC, 3.0” DIA, .375”, W/AU CTG.
MIRROR, DICHROIC, 2.0” DIA, .250”, HR
MIRROR, DICHROIC, .750” DIA, .375”, 45 DEG.
MIRROR, FRONT, LUMONICS JK701/702/703
MIRROR, FRONT, LUMONICS JK704
1 800 468 2326
408 321 8500
FAX: 408 321 8466
86
PART NO.
YMR-10074
YMR-10075
YMR-10447
YMR-10080
YMR-10689
YMR-10070
YMR-11018
YMR-10404
YMR-11939
YMR-10405
YMR-10841
YMR-10076
YMR-10078
YMR-10071
YMR-10923
YMR-10074
YMR-10075
YMR-10406
YMR-10070
YMR-10090
YMR-11767
YMR-10314
YMR-11273
YFL-11016
YMR-10075
YMR-11667
YMR-12557
YMR-11112
YMR-11113
YMR-12558
YMR-11082
YMR-11668
YMR-12556
YMR-11159
YMR-10074
YMR-10447
YMR-10070
YMR-11098
YMR-13792
YMR-16379
YMR-11788
YMR-14966
YMR-11471
YMR-11662
YMR-11719
YMR-11720
DESCRIPTION
MANUFACTURER
GSI LUMONICS (Continued)
MIRROR, FRONT, .750” DIA, .250”, 24%R, HLP3000
MIRROR, GALVO, LUMO #12220450A
MIRROR, REAR, LUMONICS JK701/702/703/704
MIRROR, REAR, .5” DIA, .250”, LUMO/HOBART
MIRROR, SHUTTER, ASSEMBLY, LUMO #PC013490X
MIRROR, TURNING, LUMONICS, 1222070YA, MULTIWAVE
MIRROR, TURNING, ASSEMBLY, LUMO #P44V5740B
MIRROR, TURNING, LUMONICS #12220060A
WINDOW, ASSEMBLY, LUMONICS, P68W2430X
WINDOW, 1.0”, .250”, LUMO #12210210A
LEE LASER
MIRROR, REAR, 0.75” DIA, 0.375”, 100%R
QUANTRONIX
MIRROR, FRONT, F/W, 12%, QUANTRONIX 114/116
MIRROR, FRONT, F/W, 20%T, QUANTRONIX 117
MIRROR, FRONT, +70, 20%T, QUANTRONIX 116
MIRROR, REAR, F/W, HR, QUANTRONIX 114/116/117/118
MIRROR, REAR, -70/W, HR, QUANTRONIX 116
MIRROR, REAR, QUANTRONIX 118, NEW STYLE
MIRROR, REAR, QUANTRONIX 118, OLD STYLE
RAYTHEON
BEAMSPLITTER, RAYTHEON SS347
BRACKET, MIRROR, RAYTHEON SS500
BRACKET, MIRROR, RAYTHEON SS550
MIRROR, REAR, RAYTHEON 1.0” DIA.
MIRROR, SHUTTER, BEAM DUMP, RAYTHEON SS550
MIRROR, SHUTTER, RAYTHEON SS500
KIT, NEUTRAL DENSITY FILTER
SPECTRON
MIRROR, FRONT, 1.0” DIA, .250” THK, FS, SPECTRON
MIRROR, REAR, 1.0” DIA, .250” THK, FS, SPECTRON
TOSHIBA
MIRROR, OUTPUT, .750” DIA, 60%R, TOSHIBA
MIRROR, REAR, .750” DIA, TOSHIBA
UNITEK MIYACHI
ATTENUATOR, 2%, CTD BOTH SIDES,
UNITEK MIYACHI LW10, LW15
ATTENUATOR, 4%, COATED ONE SIDE,
UNITEK MIYACHI LW10/15
ATTENUATOR, 8%, UNCOATED, UNITEK MIYACHI LW10/15
ATTENUATOR KIT
BEAMSPLITTER, 24%, UNITEK MIYACHI
PART NO.
YMR-16341
YMR-16356
YMR-16357
YMR-16358
YMR-16318
YMR-11718
YMR-16340
YMR-16330
YMR-13819
YMR-16332
YMR-16279
YMR-14196
YMR-16305
YMR-10075
YMR-10080
YMR-10070
YMR-10924
YMR-11198
YMR-11096
YMR-10512
YMR-10922
YMR-11280
YMR-11271
YMR-10384
YMR-12636
YMR-11783
YMR-10076
YMR-10077
YMR-10072
YMR-10069
YMR-11531
YMR-11752
YMR-10572
YMR-13915
YMR-13914
YMR-11833
YMR-11834
YMR-13085
YMR-13083
YMR-13082
YMR-14965
YMR-13138
YMR-13137
Nd:YAG Mirrors
Nd:YAG
MIRRORS
DESCRIPTION
MANUFACTURER
UNITEK MIYACHI (Continued)
BEAMSPLITTER, BRANCH, 100%, UNITEK MIYACHI
BEAMSPLITTER, FOCUS HEAD, 100%, LW250
MIRROR, BRANCH 30mm x 30mm x 2mm THK,
UNITEK MIYACHI
MIRROR, FRONT, 45%, UNITEK MIYACHI LW10, LW15
MIRROR, FRONT, UNITEK MIYACHI LW51, LW52, LW100
MIRROR, FRONT, 65%R, UNITEK MIYACHI LW250/LW300
MIRROR, REAR, 100%, UNITEK MIYACHI, LW10/15
MIRROR, REAR, 100%, UNITEK MIYACHI, LW51, LW52, LW100
MIRROR, REAR, 100%, UNITEK MIYACHI, LW250, LW300
MISCELLANEOUS
WINDOW, OUTPUT, SAPPHIRE, ASSEMBLY
WINDOW, OPTICAL, GLOVEBOX
PRISM, BENDING, 1.0”, 90 DEG
PADDLE ASSEMBLY, MIRROR, GALVO, Y AXIS
PADDLE ASSEMBLY, MIRROR, GALVO, X-AXIS
MIRROR, TURNING, 2.0” DIA, .250” THK, FS
MIRROR, TURNING, 1” x 1”, .250” THK, PR. ALUM
MIRROR, TURNING, 1” x 1”, .250” THK, FS, HR
MIRROR, SURFACE, FRONT, 2.0’ DIA, .250” THK, FS
MIRROR, SPLIT, 1.0” DIA, .25”, 50T/AR 1064P
MIRROR, SPLIT, 1.0” DIA, .25”, 50% T/AR 532S
MIRROR, SPLIT, 1.0” DIA, .25”, 33% R/AR 1064P
MIRROR, REAR, 1.0”, .250” THK, 100%R, FS
MIRROR, REAR, 1.0” DIA, .375”, 100%R, 1 Mcc
MIRROR, REAR, 0.75” DIA, 0.375”, HR, 2Mcx
MIRROR, REAR, 0.75” DIA, 0.375”, 100%R, AR
MIRROR, REAR, 0.75” DIA, 0.375”, 100%R
MIRROR, GALVO, 1.0” DIELECTRIC
MIRROR, FRONT, 1.0”, .250” THK, 20%R, FS
MIRROR, FRONT, 1.0” DIA, .375”, 88%R
MIRROR, FRONT, 0.75” DIA, 0.375”, YAG/GREEN
PART NO.
YMR-13145
YMR-13144
YMR-13143
YMR-13142
YMR-13086
YMR-14811
YMR-13186
YMR-13096
YMR-13111
YMR-13126
YMR-13097
YMR-13112
YMR-13127
YMR-10661
YMR-13278
YMR-11839
YMR-11069
YMR-11070
YMR-14739
YMR-14774
YMR-13986
YMR-14742
YMR-10895
YMR-10894
YMR-10896
YMR-14354
YMR-10763
YMR-11098
YMR-11082
YMR-10070
YMR-12263
YMR-10073
YMR-10072
YMR-14353
YMR-10762
YMR-10689
YMR-10080
YMR-10075
YMR-10447
YMR-10074
YMR-10923
YMR-10071
DESCRIPTION
MANUFACTURER
MIRROR, DUAL BAND, 3.0” DIA, .300” THK, FS
MIRROR, DICHROIC, 50mm DIA, 10mm, Cu, YAG
MIRROR, DICHROIC, 3.56” x 3.25” x .250” THK
MIRROR, DICHROIC, 3.3’ x 3.6’, HeNe, 50/50
MIRROR, DICHROIC, 3.3” x 3.6” x .25”
MIRROR, DICHROIC, 3.3” x 4.695” x .250” THK
MIRROR, DICHROIC, 3.0” DIA, HR, HT, FS
MIRROR, DICHROIC, 3.0” DIA, HR, FS
MIRROR, DICHROIC, 2.0” DIA, YAG/GREEN
MIRROR, DICHROIC, 2.0” DIA, HRHT
MIRROR, DICHROIC, 2.0” DIA, HR 1.06, NRL
MIRROR, DICHROIC, 2.0” DIA, .375”, FS
MIRROR, DICHROIC, 2.0” DIA, .250” THK, FS
MIRROR, DICHROIC, 2.0” DIA, .250”, HR
MIRROR, DICHROIC, 2.0”, .375”, W/SILVER CTG.
MIRROR, DICHROIC, 1.75” DIA, HRHT
MIRROR, DICHROIC, 1.5” DIA, .370” THK, BK7, Y/H
MIRROR, DICHROIC, 1.5” DIA, .250” THK, BK7, Y/H
MIRROR, DICHROIC, 1.5”, .250”, FS, 1064/532nm
MIRROR, DICHROIC, .750” DIA, .375”, 45 DEG.
MIRROR, DICHROIC, .750” DIA, .250”, 45 DEG
MIRROR, DICHROIC, .750” DIA, .125”, 45 DEG
MIRROR, BEND, 45 DEG, 30mm x 30mm x 2mm, BK7
MIRROR, BEND, 3.0” DIA, HR, 45 DEG
MIRROR, BEND, 1.5” DIA, .250” THK, BK7
MIRROR, BEND, 1.0” DIA, 0.25”, 532S-POL
MIRROR, BEND, 1.0” DIA, .25”, HR
MIRROR, 9.5mm, x YAG
MIRROR, 3.0” DIA., 0.5”, Cu, CTD
MIRROR, 3.0” DIA, HRHT, FS
MIRROR, 3.0” DIA, HRHT
MIRROR, 3.0” DIA, Cu, RWK, CTD
MIRROR, 2.0” DIA, .375” THK, 355nm
MIRROR, 2.0” DIA, .375”, Cu
MIRROR, 1.0” DIA, .125” THK, FS, HR W/NOTCH
KIT, NEUTRAL DENSITY FILTER
KIT, BEAM BENDER, W/1.5 DICHROIC
BEAMSPLITTER, 50/50, 2.0” DIA, YAG
BEAMSPLITTER, 50/50, 1.5” DIA, .375”, 45 DEG.
PART NO.
YMR-14741
YMR-11868
YMR-13204
YMR-11862
YMR-10107
YMR-13598
YMR-12498
YMR-10866
YMR-10078
YMR-11459
YMR-10740
YMR-10834
YMR-10077
YMR-11736
YMR-14740
YMR-11471
YMR-11761
YMR-10742
YMR-10741
YMR-11871
YMR-11758
YMR-14360
YMR-10076
YMR-11662
YMR-13678
YMR-11799
YMR-14533
YMR-11295
YMR-13676
YMR-10492
YMR-10672
YMR-13594
YMR-10575
YMR-10868
YMR-10505
YMR-10576
YMR-15556
YMR-10709
YMR-13167
YMR-10572
YMR-10571
YMR-11181
YMR-11664
1 800 468 2326
408 321 8500
FAX: 408 321 8466
87
Fiber Optics / Q-Switches
FIBER OPTICS
DESCRIPTION
FIBER OPTIC CABLES
FIBER, OPTIC, 1 METER, 800um, S.I.
GSI LUMONICS
FIBER, OPTIC, 5 METER, 600um, S.I., LUMONICS
FIBER, OPTIC, 10 METER, PLUG N PLAY, LUMONICS
FIBER, OPTIC, 10 METER, 600um, S.I., LUMONICS
FIBER, OPTIC, 15 METER, 1000um, S.I., LUMO MW
REWORK, FIBER, OPTIC, 10 METER, PLUG-N-PLAY, LUMO
REWORK, FIBER, OPTIC, 15 METER, 600um, S.I., LUMO
REWORK, FIBER, OPTIC, 10 OR 15 METER, 600um, S.I., LUMO
PART NO.
BMD-14039
BMD-13437
BMD-14757
BMD-13729
BMD-14815
BMD-16294
BMD-13250
BMD-14797
BMD-13910
BMD-14794
BMD-16293
BMD-14802
BMD-14912
BMD-14352
BMD-16328
BMD-16362
BMD-14195
BMD-14950
BMD-14967
DESCRIPTION
UNITEK MIYACHI
FIBER, OPTIC, 10 METER, 600um, S.I., UNITEK MIYACHI
FIBER, OPTIC, 10 METER, 400um, G.I., UNITEK MIYACHI
MISCELLANEOUS
ILLUMINATOR, OPTIC, FIBER
REWORK, FIBER, OPTIC, 800um
REWORK, FIBER, OPTIC, REPOLISH ONLY
REWORK, FIBER, OPTIC, REPOLISH/REPLACE END
PART NO.
BMD-13407
BMD-16264
BMD-16265
BMD-13822
BMD-13580
BMD-13579
BMD-13180
BMD-16292
BMD-14355
BMD-10588
BMD-13191
BMD-13269
BMD-13210
Q-SWITCHES
DESCRIPTION
Q-SWITCH, 24MHz, 70 WATT
Q-SWITCH, 24MHz, COH M815
Q-SWITCH, 24 MHz, QX117
Q-SWITCH, 27.12MHz, 70 WATT
Q-SWITCH, 27.12MHz, 70 WATT, LUMO WRITER
Q-SWITCH, 27.12MHz, 70 WATT, SPECTRON SL902
Q-SWITCH, 27.12MHz, 70WATT, LASERVALL
1 800 468 2326
408 321 8500
FAX: 408 321 8466
88
PART NO.
QSW-10028
QSW-11087
QSW-16317
QSW-10329
QSW-14204
QSW-13913
QSW-13988
DESCRIPTION
Q-SWITCH, 27.12MHz, ROFIN SINAR
Q-SWITCH, 50MHz, 12.5 WATT
Q-SWITCH, 68MHz, MODEL331
Q-SWITCH, 68MHz, MODEL333
Q-SWITCH, 68MHz, WATER-COOLED
Q-SWITCH, ESI 3570
Q-SWITCH, R/E, ESI-4210
PART NO.
QSW-11409
QSW-10383
QSW-10792
QSW-11014
QSW-14734
QSW-13235
QSW-12208
Filters
FILTERS
DESCRIPTION
MANUFACTURER
AB BAASEL
FILTER, PARTICLE
FILTER, PARTICLE, 10”
FILTER, PARTICLE, ELEMENT, AB/BAASEL COMBO
FILTER, DI, AB/BAASEL LASER
FILTER, DI, AB/BAASEL LASER
APOLLO
FILTER, DI, APOLLO 1610/1630
FILTER, PARTICLE, APOLLO
COHERENT
FILTER, PARTICLE, COHERENT
FILTER, PARTICLE, COHERENT M815
FILTER, PARTICLE, COHERENT M34
FILTER, DI, COHERENT M34
FILTER, PARTICLE, COHERENT MODEL 11 & 14
FILTER, DI, COHERENT GAMMA
FILTER, DI, COHERENT M815
FILTER, MOISTURE, COHERENT
FILTER, OIL, COHERENT
CONTROL
FILTER, PARTICLE, CONTROL, 10”
FILTER, PARTICLE, CONTROL, 9”
FILTER, PARTICLE, PLEATED, CONTROL
FILTER, PARTICLE, CONTROL 100W
FILTER, DI, CONTROL
FILTER, DI, CONTROL ELITE/SIGNATURE
FILTER, COMBO, CURRENT STYLE
FILTER, COMBO, OLD STYLE
ELECTROX
FILTER, PARTICLE
FILTER, PARTICLE, 076-000-004
FILTER, DI
ESI
FILTER, DI, ESI
FILTER, PARTICLE, ESI
LASAG
FILTER RESIN, DI, LASAG
LEE
FILTER, DI, LEE LASER , 10”
FILTER, DI, LEE LASER, 12”
FILTER, DI, COMBO
GSI LUMONICS
FILTER RESIN, DI, LUMONICS JK & AB
FILTER, PARTICLE, LUMONICS JK
FILTER, DI, LUMONICS, LUXSTAR
PART NO.
DESCRIPTION
WFI-10376
WFI-10116
WFI-11856
WFI-10115
WFI-11184
FILTER, DI, 10”, NEC
HOUSING, CLEAR, 10”, NEC
WFI-10414
WFI-10121
WFI-10336
WFI-10764
WFI-10808
WFI-10784
WFI-11101
WFI-14770
WFI-10765
WFI-10335
WFI-10337
WFI-10116
WFI-10376
WFI-11269
WFI-10808
WFI-10115
WFI-12197
WFI-10124
WFI-10325
WFI-10422
WFI-11737
WFI-10124
WFI-10119
WFI-10122
WFI-11522
WFI-11122
WFI-11795
WFI-10124
MANUFACTURER
NEC
PART NO.
WFI-16298
WFI-16297
PHOTON
FILTER, CARTRIDGE, PHOTON
WFI-10917
QUANTRONIX
FILTER, DI, QUANTRONIX
FILTER, PARTICLE, QUANTRONIX
FILTER, PARTICLE, QUANTRONIX 114, SPECIAL
FILTER, DI, QUANTRONIX, FLAT ENDS
FILTER, DI, QUANTRONIX, NIPPLE END
RAYTHEON
FILTER, PARTICLE, RAYTHEON
FILTER, DI, RAYTHEON
ROFIN SINAR
FILTER, PARTICLE, ROFIN SINAR PY500
SPECTRA PHYSICS
FILTER, DI, SPECTRA 820
TRUMPF/HAAS
FILTER, RESIN, DI, TRUMPF
USL
FILTER, DI, USL, 17”
UNITEK MIYACHI
ION EXCHANGE RESIN PACK, UNITEK MIYACHI LW10/15
KIT, DI, UNITEK MIYACHI LW51, LW52, LW100/250/300
KIT, DI, CARTRIDGE, UNITEK MIYACHI LM45
KIT, DI, UNITEK MIYACHI LW10/15/10E/15E
FILTER, DI, KIT, UNITEK MIYACHI LW250, 300
WATER FILTER CARTRIDGE, UNITEK MIYACHI LW10/15
FILTER, PARTICLE, UNITEK MIYACHI LM45
FILTER, PARTICLE, UNITEK MIYACHI LW51, 52, 100
MISCELLANEOUS
FILTER, DI, 20” LONG
FILTER, DI, COMBO
FILTER, ION, 12”
FILTER, OIL REMOVING
FILTER, PARTICLE
FILTER, SOOT REMOVAL SYSTEM, LARGE
FILTER, SOOT REMOVAL SYSTEM, SMALL
FILTER, WATER, AUTO DRAIN
WFI-10326
WFI-10114
WFI-12753
WFI-10117
WFI-10123
WFI-10120
WFI-10118
WFI-11299
WFI-10784
WFI-14711
WFI-10666
WFI-13422
WFI-12793
WFI-13195
WFI-13162
WFI-13048
WFI-13038
WFI-13194
WFI-12794
WFI-14210
WFI-10325
WFI-10124
WFI-12933
WFI-13987
WFI-13175
WFI-13174
WFI-12935
WFI-10746
WFI-10745
WFI-11796
1 800 468 2326
408 321 8500
FAX: 408 321 8466
89
Cooling Components
COOLING
COMPONENTS
DESCRIPTION
MANUFACTURER
AB/BAASEL
PUMP, IMPELLER, AB/BAASEL LASER
PUMP, SEAL SET, AB/BAASEL LASER
PUMP, MOTOR, AB/BAASEL LASER
PUMP, VOLUTE, AB/BAASEL LASER
PUMP, WATER, ASSEMBLY, AB/BAASEL LASER
O-RING, PUMP, SEAL, AB/BAASEL LASER
COHERENT
OIL, COOLING, DIALA, COHERENT
THERMOSTAT, COHERENT M815
CONTROL
PUMP, 1PH, 3/4 HP
PUMP, 3PH, 1 HP
PUMP, 3PH, 3/4 HP
PUMP, BOOT GASKET, CONTROL
PUMP, IMPELLER, CONTROL
PUMP, SEAL KIT, CONTROL
PUMP, VOLUTE, CONTROL
PUMP, VOLUTE, CONTROL, 4 HOLES
THERMOSTAT, A1-S, CONTROL
ESI
HEAT EXCHANGER, ESI
PUMP, 3PH, 1/3 HP, ESI
PUMP, IMPELLER, ESI
PUMP, VOLUTE, ESI
SEAL, SS, PUMP, ESI
1 800 468 2326
408 321 8500
FAX: 408 321 8466
90
PART NO.
H2O-11163
H2O-11165
H2O-11166
H2O-11164
H2O-11167
H2O-11168
H2O-11520
H2O-10772
H2O-10373
H2O-10416
H2O-10415
H2O-10199
H2O-10200
H2O-10201
H2O-10202
H2O-13974
H2O-10346
H2O-11150
H2O-10537
H2O-10540
H2O-10541
H2O-10538
DESCRIPTION
MANUFACTURER
GSI LUMONICS
PUMP, ASSEMBLY, LUMONICS JKMS830
PUMP, ASSEMBLY, LUMONICS 700 SERIES
PUMP, IMPELLER, LUMONICS 700 SERIES
PUMP, SEAL SET, LUMONICS 700 SERIES
PUMP, VOLUTE, LUMONICS 700 SERIES
QUANTRONIX
HEAT EXCHANGER, QUANTRONIX 114/116/117/118
PUMP, 1PH, 1HP, QUANTRONIX
PUMP, BOOT GASKET, QUANTRONIX
PUMP, IMPELLER, QUANTRONIX
PUMP, SEAL KIT, QUANTRONIX
RAYTHEON
HEAT EXCHANGER, RAYTHEON
PUMP, 3PH, 3/4 HP
KIT, PUMP, REPAIR, RAYTHEON SS500
UNITEK MIYACHI
PUMP, WATER, UNITEK MIYACHI LW10/15
PUMP, WATER, PH. 10, UNITEK MIYACHI LW250, LW300
MISCELLANEOUS
FLOWMETER, EZ-VIEW, 1” NPT, HEDLAND, 15GPM
METER, FLOW, DLI
OIL, PUMP
PUMP, 1 PH, 3/4 HP
PUMP, 3 PH, 1HP
PUMP, 3 PH, 3/4 HP
PUMP, MOTOR, 1PH, 3/4 HP
PUMP, RV3 ROTARY VANE
PART NO.
H2O-11802
H2O-11172
H2O-11169
H2O-11171
H2O-11170
H2O-10907
H2O-11369
H2O-10199
H2O-10200
H2O-10201
H2O-11532
H2O-10415
H2O-11021
H2O-13100
H2O-13130
H2O-11874
H2O-11588
H2O-11806
H2O-10373
H2O-10416
H2O-10415
H2O-11755
H2O-12254
Seals & O-Rings
SEALS &
O-RINGS
DESCRIPTION
MANUFACTURER
AB BAASEL
KIT, O-RING, AB/BAASEL LASER
APOLLO
O-RING, APOLLO 1610 HEAD, SILICONE
O-RING, APOLLO 1610 HEAD, VITON
O-RING, ROD HOLDER, APOLLO 1610, SILICONE
O-RING, ROD, APOLLO 1610, TEFLON
COHERENT
KIT, 0-RING, COHERENT M815
KIT, O-RING, COHERENT M34
O-RING, COHERENT M34, NITRILE
O-RING, COOLANT TUBE, COHERENT
O-RING, COOLING TUBE, COHERENT
O-RING, END FITTING, MODULE, COHERENT MDL 11/14
O-RING, LAMP, MODULE, COHERENT MODEL 11/14
O-RING, PLASMA, COHERENT, VITON
O-RING, ROD, MODULE, COHERENT MODEL 11
SEAL, ROD, TEFLON, COHERENT M34
CONTROL
KIT, O-RING, CONTROL 258/520
KIT, O-RING, CONTROL 400
KIT, O-RING, CONTROL 510
O-RING, ADAPTER, CONTROL 510/512
O-RING, HEAD BLK, CONTROL 512, SILICONE
O-RING, HEAD, BLK, CONTROL 510, SILICONE
O-RING, ROD, CONTROL 400, TEFLON
O-RING, ROD, HEAD, CONTROL 510/512, SILICONE
O-RING ROD, 4mm, TEFLON
ESI
KIT, O-RING, ESI 3570
O-RING, PUMP, ESI
O-RING, ROD, ESI 3570, SILICONE/TEFLON
GSI LUMONICS
O-RING, HEAD, LUMONICS, JK701/702/704
O-RING, LAMP, LUMONICS JK700
O-RING, LAMP, LUMONICS JK, SILICONE
O-RING, LENS PROTECTOR, RETAINER, LUMONICS
O-RING, LUMONICS MS330/830
O-RING, PUMP, SEAL, LUMONICS 700 SERIES
LASER OPTRONICS
KIT, O-RING, LASER OPTRONICS 757
KIT, O-RING, LASER OPTRONICS MLS35
O-RING, ROD SEAL, LASER OPTRONICS MLS35
LEE LASER
KIT, O-RING, LEE LASER, 8250M
KIT, O-RING, LEE LASER, SILICONE
MITSUBISHI
O-RING, NOZZLE, MITSUBISHI, W290
KIT, O-RING, LASERMETRICS 9530
KIT, O-RING, LASERMETRICS9555
QUANTRONIX
KIT, O-RING, QUANTRONIX 114/116/416, VITON
KIT, O-RING, QUANTRONIX 117
KIT, O-RING, QUANTRONIX 118
O-RING, (SEAL RING), QUANTRONIX
PART NO.
ORI-11085
ORI-10170
ORI-10169
ORI-10424
ORI-10158
ORI-10775
ORI-11466
ORI-10993
ORI-12876
ORI-10947
ORI-12386
ORI-12385
ORI-10948
ORI-12384
ORI-12377
ORI-10163
ORI-10919
ORI-10160
ORI-10161
ORI-10162
ORI-10354
ORI-10166
ORI-10350
ORI-10155
ORI-10318
ORI-10153
ORI-10164
ORI-10539
ORI-10157
ORI-11764
ORI-11283
ORI-11182
ORI-13054
ORI-11860
ORI-11173
ORI-11887
ORI-11882
ORI-11880
ORI-13798
ORI-10167
ORI-11936
DESCRIPTION
MANUFACTURER
QUANTRONIX (Continued)
O-RING, ADAPTER, HEAD BLK, QUANTRONIX
O-RING, HEAD, QUANTRONIX 117
O-RING, HEAD, QUANTRONIX 118
O-RING, HEAD, QUANTRONIX, SILICONE
O-RING, LAMP, QUANTRONIX 114/116/117
O-RING, PRESSURE PLATE, QUANTRONIX
O-RING, ROD JACKET, QUANTRONIX 114
O-RING, ROD JACKET, QUANTRONIX 116/117/118
O-RING, ROD, QUANTRONIX 114
O-RING, ROD, QUANTRONIX 117, 6.35mm
O-RING, QUANTRONIX , HEAD, WATER INLET
O-RING, ROD, 4mm, QUANTRONIX 116, THK C SEC.
RAYTHEON
GASKET, SET, CAVITY, RAYTHEON SS500/550, .030” THK
GASKET, SET, CAVITY, RAYTHEON SS500/SS550, .060” THK
KIT, O-RING, RAYTHEON SS484
SEAL, ROD, TEFLON, RAYTHEON SS484
SEAL, ROD, TEFLON, RAYTHEON SS500
O-RING, LAMP, RAYTHEON SS484, SILICONE
O-RING, LAMP, RAYTHEON, SILICONE
O-RING, ROD, RAYTHEON SS484, SILICONE
TRUMPF/HAAS
O-RING, LAMP, HAAS, HL703-HL3003
UNITEK MIYACHI
O-RING, 4.25”, UNITEK MIYACHI, LW10, LW15
O-RING, 6mm ID, UNITEK MIYACHI, LW10, LW15
O-RING, 9mm ID, UNITEK MIYACHI, LW100
O-RING, 12.5mm ID, UNITEK MIYACHI, LW51, LW52, LW100
O-RING, SILICON RUBBER, UNITEK MIYACHI LW51, LW52, LW100
O-RING, SILICON RUBBER, UNITEK MIYACHI, LW10, LW15
O-RING, HEAD, LW50A, LW70A
O-RING, HEAD, LW400
MISCELLANEOUS
GREASE, HIGH VACUUM
O-RING MATERIAL, VITON, .236” DIA.
O-RING, .250” ROD, TEFLON
O-RING, 3mm, ROD, SILICONE
O-RING, 3mm, ROD, TEFLON
O-RING, MOUNT, LENS, YAG, 1.1’, VITON YAG
PART NO.
ORI-12923
ORI-11339
ORI-11351
ORI-10418
ORI-10682
ORI-11550
ORI-10820
ORI-10821
ORI-10822
ORI-10819
ORI-16329
ORI-10952
ORI-14231
ORI-14943
ORI-10321
ORI-14219
ORI-10394
ORI-10387
ORI-11132
ORI-11131
ORI-14809
ORI-12376
ORI-10316
ORI-10168
ORI-10317
ORI-14812
ORI-13032
ORI-13028
ORI-13012
ORI-13029
ORI-13030
ORI-13013
ORI-13031
ORI-13014
ORI-13015
ORI-14994
ORI-16256
ORI-11968
ORI-11853
ORI-13984
ORI-10822
ORI-10165
ORI-10153
ORI-11080
ORI-10928
ORI-10870
ORI-11263
ORI-10605
ORI-11341
ORI-11353
ORI-10509
1 800 468 2326
408 321 8500
FAX: 408 321 8466
91
Electrical
ELECTRICAL
DESCRIPTION
ANODE, ROFIN SINAR 820, R/E
ARRESTORS, ZINC, SPECTRA PHYSICS 820
ATTENUATOR, REFLECTOR, ESI TOWER, 100%R
BL-6 EXCITATION CASING, AB/BAASEL LASER
BLADE, SHUTTER CDRH, RAYTHEON SS550
BLADE, SHUTTER DUMP MIRROR BRACKET, RAY SS550
BLADE, SHUTTER, COHERENT M46
BLOWER, RAYTHEON M040-1-#037856
BOARD, BEAM FUNCTION CONTROL, I-MARK
BOARD, BOOSTER #2, CL26
BOARD, CIO CIRCUIT, CONTROL 400
BOARD, COMMUTATION & DUMP, CONTROL 400
BOARD, CONTROL CIRCUIT, CONTROL 400
BOARD, CONTROL, QUANTRAD, REPAIR
BOARD, CONTROLLER, SCR, 3 PHASE, RAYSS501A-7
BOARD, CPU INTERFACE, CONTROL 400
BOARD, CURRENT CONTROL, CL20
BOARD, CURRENT CONTROL, CL21, REPAIR
BOARD, CURRENT CONTROL, CL21/26/27
BOARD, CURRENT CONTROL, CL26, REPAIR
BOARD, CURRENT REGULATOR, AB/BAASEL LASER
BOARD, DAC INTERFACE, CONTROL 400
BOARD, DVOM, R/E, ESI
BOARD, HV SENSE & DISCHARGE, CONTROL 400
BOARD, IEEE, ESI
BOARD, INTERFACE, RL01/02-PDP8E
BOARD, INTERFACE, VT220-PDP8E, W/CABLE
BOARD, LAMP CURRENT SENSE, CONTROL400
BOARD, LAMP TRIGGER HEAD, RAYTHEON SS550
BOARD, LAMP, SIMMER, DUAL LOGIC
BOARD, LM/LC, R/E, ESI
BOARD, MANUAL FUNCTION
BOARD, MICROPROCESSOR, CONTROL 400
BOARD, MICROPROCESSOR-B, CONTROL 400
BOARD, MOTOR DRIVER, W/BRAKE MOD
BOARD, OVERVOLT PROTECT, CONTROL 400
BOARD, P/S REGULATOR, CL14
BOARD, PC SWITCH INDICATOR, RAYTHEON SS500/550
BOARD, PFN VOLT INTERLOCK, CONTROL 400
BOARD, PULSE GEN, CL13A
BOARD, PULSE GEN, CL14
BOARD, PULSE GEN, CL16/17
BOARD, RF DRIVER, R/E, ESI
BOARD, SCANNER MODULE, ESI, R/E
1 800 468 2326
408 321 8500
FAX: 408 321 8466
92
PART NO.
ELC-13657
ELC-13882
ELC-10621
ELC-11815
ELC-11894
ELC-12429
ELC-12537
ELC-13406
ELC-11143
ELC-10230
ELC-10906
ELC-10671
ELC-10863
ELC-12447
ELC-13884
ELC-11010
ELC-10231
ELC-10333
ELC-10890
ELC-11001
ELC-10235
ELC-10891
ELC-10608
ELC-10609
ELC-11820
ELC-10392
ELC-10840
ELC-10391
ELC-10673
ELC-10663
ELC-10662
ELC-10892
ELC-11810
ELC-12809
ELC-11589
ELC-11789
ELC-10651
ELC-10893
ELC-10989
ELC-10797
ELC-10390
ELC-11790
ELC-10677
ELC-10367
ELC-10234
ELC-10607
ELC-13197
ELC-11642
DESCRIPTION
BOARD, SCR TRIGGER, CONTROL 400
BOARD, SCR, HI-VOLT, DIVIDER, RAY SS500
BOARD, SHUTTER FAULT DETECTOR, CONTROL
BOARD, SHUTTER LOGIC, RAYTHEON SS550
BOARD, SIMMER INTERFACE, CONTROL 400
BOARD, TEMP ADJ, HX500, CONTROL 400
BOARD, TRIGGER BOASTER, QUANTRAD, REPAIR
BOARD, TRIGGER, CL20/21, W/O KRYTRON TUBE
BOARD, TRIGGER, CL20/CL21
BOARD, TRIGGER, CL21, REPAIR, W/KRYTRON
BOARD, TRIGGER, CL21, REPAIR, W/O KRYTRON
BOARD, TRIGGER, CL26
BOARD, TRIGGER, CL26, W/O KRYTRON TUBE
BOARD, TRIGGER, CL40
BOARD, TTL I/0, CONTROL 400
BOARD, UNIVERSAL MEM CARD, CONTROL 400
BOARD, ZOM, AB/BAASEL LASER
BRIDGE, ASSEMBLY, CL25/26/27
BULB, 14V, 80MA, AB/BAASEL LASER
BULB, 150W, AB/BAASEL LASER
BULB, 24V, 24PSB
BULB, 24V, 757
BULB, 36V, AB/BAASEL LASER
BULB, 6.3V, 200MA, AB/BAASEL LASER
BULB, HALOGEN, EFR, 15V, 150W
BULB, HALOGEN, HIGH INTENSITY
BULB, ILLUMINATOR, 150W, 21V, EKE
BULB, ILLUMINATOR, 80W, 19V, EJY
BULB, ILLUMINATOR, AUTOCOLLIMATOR
BULB, ILLUMINATOR, FCS
BULB, INDICATOR, EMISSION, CONTROL
BULB, INDICATOR, LUMONICS, 630006401
BULB, INDICATOR, ON/OFF SWITCH, APOLLO 1610
BULB, INDICATOR, RF FAULT/POWER
BULB, INFRARED, 144 VOLTS
BULB, MINI, 28 VOLTS
BULB, RAYTHEON
BULB, RAYTHEON SS380
BULB, START SWITCH, PANEL, CONTROL
BUS BAR, COPPER, CL20/21
CABLE, HV, BLACK-END, CONTROL
CABLE, HV, RED-END, CONTROL
CABLE, RIBBON, CONTROL 480-16
CAPACITOR 1000MFD, 450V, CONTROL 400
CAPACITOR, .047MFD, 1200V, FILM
CAPACITOR, .5MFD, 1.5KV
PART NO.
ELC-10232
ELC-13410
ELC-10368
ELC-16321
ELC-10236
ELC-10902
ELC-12448
ELC-11002
ELC-10233
ELC-10889
ELC-10888
ELC-10342
ELC-11003
ELC-10610
ELC-10783
ELC-10340
ELC-11821
ELC-10811
ELC-11825
ELC-11824
ELC-10225
ELC-10223
ELC-11823
ELC-11826
ELC-11827
ELC-11822
ELC-11800
ELC-11740
ELC-11732
ELC-10226
ELC-10224
ELC-12060
ELC-10219
ELC-13800
ELC-11777
ELC-10218
ELC-14218
ELC-14769
ELC-10222
ELC-10380
ELC-10220
ELC-10956
ELC-10612
ELC-10611
ELC-10243
ELC-10690
ELC-10244
ELC-10300
Electrical
ELECTRICAL
DESCRIPTION
CAPACITOR, 1000MF, 350V
CAPACITOR, 1800MFD, 450V, DC, RESERVOIR
CAPACITOR, 1MFD, 2KV, DC
CAPACITOR, 1MFD, 600V
CAPACITOR, 2MF, 600V, CONTROL
CAPACITOR, 2MFD, 2KV
CAPACITOR, 3300MFD, 350V, DC
CAPACITOR, 4MFD, 3KV, CONTROL 400
CAPACITOR, 500MFD, 2000WVDC, CONTROL 400
CAPACITOR, 50MFD, 2500V, PFN
CAPACITOR, 600MFD, 45OV
CHIP, UGN3201-M, ESI
CHOKE, CL25/26 UPGRADE
CHOKE, RAYTHEON SS550, 1.7mh
CIRCUIT BREAKER, 15A, 250V AC
CIRCUIT BREAKER, 2A, 250V
CIRCUIT BREAKER, 40A, 25OV
CONNECTOR, 3-PIN, DC DRAWER, CONTROL
CONNECTOR, INTERLOCK, BRH REC, QUANTRONIX 114/116
CONTACTOR, HV, RAYTHEON SS500
CONTROL PANEL, CL13, R/E
CONTROL PANEL, CL13, REPAIR
CONTROL PANEL, CL14
CONTROL PANEL, CL14, R/E
CONTROL PANEL, CL14, REPAIR
COVER, POWER SUPPLY, CONTROL
DIODE, 100G30, APOLLO 580
DIODE, 1N1188
DIODE, 1N1190
DIODE, F12
DIODE, F25
DIODE, FANNING, R42150TS, RAYTHEON
DIODE, FANNING, S42150TS
DIODE, HV, RAYTHEON SS500
DIODE, HVC25
DIODE, HVC60, RAYTHEON
DIODE, MC147PB
DIODE, PHOTO, RAYTHEON SS500
DIODE, PIGTAIL, LUMONICS JK701/702/703
DIODE, ST11100N
DIODE, ST11100P
DIODE, ST1160P
DIODE, ST460P
DIODE, ZENNER, 1N3311R
PART NO.
ELC-11774
ELC-10386
ELC-10249
ELC-10372
ELC-10248
ELC-10832
ELC-10247
ELC-10301
ELC-11088
ELC-10816
ELC-10299
ELC-10302
ELC-10341
ELC-13051
ELC-10810
ELC-13416
ELC-10250
ELC-10303
ELC-10304
ELC-10323
ELC-11861
ELC-10419
ELC-10885
ELC-10884
ELC-10366
ELC-10887
ELC-10886
ELC-10958
ELC-12300
ELC-12078
ELC-10285
ELC-11838
ELC-10292
ELC-11248
ELC-10289
ELC-13182
ELC-13179
ELC-11765
ELC-10361
ELC-10687
ELC-13971
ELC-10295
ELC-10296
ELC-10294
ELC-10293
ELC-10287
DESCRIPTION
ENCODER, LAMP, ASSEMBLY, S & R
ENCODER, LED, LINEAR MOTOR, ESI
ENCODER, POSITION HEAD, ESI25
ENCODER, POSITION HEAD, ESI44
ENCODER, SCALE, LINEAR, ESI44
END-BELLS, BRONZE, W/GASKETS, HEAT EXCHANGE
FAN, 113XN-0181-000
FAN, HEAT SINK, CONTROL 512
FAN, RF DRIVER, CL4
FAN, TARZAN, CONTROL 500
FILAMENT, TRANSFORMER, CL-4
FILTER, AIR
FILTER, AIR, LASER, UNITEK MIYACHI, LW10/15
FILTER, EXHAUST, COHERENT
FILTER, EXHAUST, COHERENT, NEW STYLE
FILTER, FAN ASSEMBLY, UNITEK MIYACHI, LW10/15
FILTER, LINE, EMI
FILTER, SPATIAL
FOIL, COOLANT TUBES
FUSE, (1A-250V), UNITEK MIYACHI, LW10, LW15
FUSE, (1AMP, 250V, 5A), UNITEK MIYACHI, LW250, LW300
FUSE, (20A 660V), UNITEK MIYACHI, LW51, LW52
FUSE, (30A 700V), UNITEK MIYACHI, LW100
FUSE, (3AG, 10A 400V), UNITEK MIYACHI, LW10, LW15
FUSE, (3AMP, 250V, 3A), UNITEK MIYACHI, LW51, LW52, LW100
FUSE, (6AMP, 250V, 3A), UNITEK MIYACHI, LW51, LW52, LW100
FUSE, 10A, 250V, COHERENT M815
FUSE, 2.5A, 250V, COHERENT M815
FUSE, 25A, DISTR PANEL, CONTROL
FUSE, 2A, DISTR PANEL, CONTROL
FUSE, 2A, RF DRIVER, CL4, CONTROL
FUSE, 30A, 250V, KAX-30
FUSE, 6.3A, 250V, COHERENT M815
FUSE, BUZZ, FRN-R-20A
FUSE, THERMAL, SHUTTER, LUMONICS JK830
FUSE, UNITEK MIYACHI, LW250, LW300
FUSE, UNITEK MIYACHI, LW250, LW300
GUARD, SWITCH, CONTROL BOX, UNITEK MIYACHI
HEAT SINK, ASSEMBLY, CONTROL 512
HOUSING, HEAT SINK
IC, LM35DZ, LUMONICS MULTIWAVE TEMP SENSOR
IC, OP-AMP
IC301, RAYTHEON
IC311, RAYTHEON
PART NO.
ELC-10360
ELC-10227
ELC-10680
ELC-10594
ELC-10595
ELC-13883
ELC-12471
ELC-11354
ELC-11185
ELC-11013
ELC-12501
ELC-11593
ELC-13039
ELC-11415
ELC-11505
ELC-12998
PNE-10858
ELC-10602
ELC-12875
ELC-12999
ELC-13005
ELC-13001
ELC-13004
ELC-13002
ELC-13003
ELC-13000
ELC-10771
ELC-10767
ELC-10769
ELC-10255
ELC-10768
ELC-10253
ELC-10254
ELC-10256
ELC-10770
ELC-11814
ELC-11735
ELC-13006
ELC-13007
ELC-13922
ELC-12563
ELC-12562
ELC-12062
ELC-10297
ELC-10476
ELC-10477
1 800 468 2326
408 321 8500
FAX: 408 321 8466
93
Electrical
ELECTRICAL
DESCRIPTION
IC321, RAYTHEON
IC322, RAYTHEON
IC325, RAYTHEON
IC333, RAYTHEON
IC342, RAYTHEON
IC347, RAYTHEON
IC374, RAYTHEON
IC390, RAYTHEON
INDICATOR LAMP, AMBER, CONTROL 400
INDICATOR LAMP, LASER ON
INDICATOR LAMP, SIMMER, CONTROL 400
INDICATOR, CLIP, INSTAMARK, RED
INDUCTOR, PFN RAYTHEON
INSULATOR, MICA
KIT, CHICAGO, MLK-512
KIT, IC, RAYTHEON SS500
KIT, SHUTTER, RETROFIT, (FAIL SAFE)
LAMP, ILLUMINATOR, ESI
LAMP, UM, COHERENT, DIAMOND 64
LATCH/SENSOR, DOOR, LW300, UNITEK MIYACHI
METER COVER, RAYTHEON SS500
METER, CURRENT, 0-1M AMP, CL14, CONTROL
METER, FREQUENCY/POWER, CL14, CONTROL
METER, HOUR, LAMP, LEE650M P/S
METER, HOUR, RAYTHEON SS501
METER, TIME, ELAPSED, DC DRAWER, CONTROL
MODULE, ECQ, 2 MIRROR, COHERENT
MODULE, ECQ, 4 MIRROR, COHERENT
MODULE, ECQ, DLI, 1.75”
MODULE, INPUT, IDC5, CONTROL 400
MODULE, OAC5, 110V, CONTROL
MODULE, OUTPUT, ODC5, CONTROL 400
MOTOR, GALVO, G300PD, CONTROL 612, 50W
MOTOR, GALVO, G320
MOTOR, GALVO, G325DT
OIL, WAY, ESI {BOTTLE}
PANEL, MANUAL FUNCTION, ESI
PLUG, PIN, BLACK, PP50GB, CONTROL 500
PLUG, PIN, RED, PP50GR, CONTROL 500
POTENTIOMETER, 100 OHM, 2W
POTENTIOMETER, 100 OHM, CURRENT CONTROL, CL14
POTENTIOMETER, 5K OHM, FREQ. ADJ
POTENTIOMETER, CURRENT CONTROL, COHERENT 150
POTENTIOMETER, PFN, RAY
POTENTIOMETER, PFN, RAYTHEON SS501
POTENTIOMETER, PULSE RATE, RAYTHEON
POWER MODULE, 1700V, CONTROL 400
POWER MODULE, 1700V, CONTROL 400, REPAIR
1 800 468 2326
408 321 8500
FAX: 408 321 8466
94
PART NO.
ELC-10482
ELC-10636
ELC-11842
ELC-11843
ELC-10478
ELC-10479
ELC-10480
ELC-10481
ELC-10623
ELC-10625
ELC-10624
ELC-10578
ELC-12259
ELC-10374
ELC-10984
ELC-10483
ELC-10315
ELC-11130
ELC-11639
ELC-13964
ELC-10596
ELC-10305
TST-10603
ELC-14904
ELC-11659
ELC-10148
ELC-11213
ELC-10790
ELC-11568
ELC-11565
ELC-10857
ELC-11157
ELC-11715
ELC-11158
ELC-11121
ELC-11675
ELC-13084
ELC-10259
ELC-10260
ELC-10264
ELC-10778
ELC-10739
ELC-11848
ELC-10503
ELC-11402
ELC-11133
ELC-10529
ELC-11928
DESCRIPTION
POWER SUPPLY, ±15V, ESI
POWER SUPPLY, 24VDC, XMR
POWER SUPPLY, BRICK, HeNe
POWER SUPPLY, CL20, R/E
POWER SUPPLY, CL20, REPAIR
POWER SUPPLY, CL20/21, UPGRADE
POWER SUPPLY, CL21
POWER SUPPLY, CL25/26, UPGRADE
POWER SUPPLY, CL26
POWER SUPPLY, CONTROL 612, REPAIR
POWER SUPPLY, EMKI, QUANTRONIX, R/E
POWER SUPPLY, EMKI, QUANTRONIX, REPAIR
POWER SUPPLY, ESI, R/E
POWER SUPPLY, ESI, REPAIR
POWER SUPPLY, HeNe
POWER SUPPLY, HeNe, UNIPHASE
POWER SUPPLY, HeNe, XMR
POWER SUPPLY, TRIGGER, 1610
PROBE, PACKAGE, WHITE, ESI
PROCESS SHUTTER, LUMONICS, R/E
RATIO BRIDGE, REPAIR
RECEPT, 3-PIN, 57GB3F, CONTROL
RECEPT, 3-PIN, 57HA3F, CONTROL
RECEPT, SOCKET, BLACK, CONTROL
RECEPT, SOCKET, RED, CONTROL
RECTIFIER, 3-PHASE BRIDGE, CONTROL 400
RELAY, 120V, (K3), 225-438-00
RELAY, 15A, 24VAC
RELAY, 40A, 24V, CONTROL 500
RELAY, DC DRAWER, CONTROL
RELAY, DISTR PANEL, CONTROL
RELAY, HV, DUMP, RAYTHEON
RELAY, K501AC, COHERENT
RELAY, K502, COHERENT150
RELAY, K503, COHERENT 150
RELAY, KC-2, CERAMIC VACUUM, APOLLO 1610
RELAY, SAFETY, DC DRAWER, CONTROL 258
RELAY, SAFETY, DC DRAWER, CONTROL 510/512
PART NO.
ELC-11738
ELC-10835
ELC-10534
ELC-10876
ELC-10875
ELC-10877
ELC-10369
ELC-10789
ELC-10853
ELC-10879
ELC-10878
ELC-10881
ELC-10370
ELC-10788
ELC-10880
ELC-10883
ELC-10882
ELC-11804
ELC-11805
ELC-13455
ELC-11099
TST-11144
ELC-12898
ELC-11890
ELC-10521
ELC-11768
ELC-10838
ELC-10257
ELC-12392
PNE-14748
ELC-12290
ELC-10388
ELC-10389
ELC-10262
ELC-10261
ELC-10313
ELC-11754
ELC-10744
ELC-11111
ELC-10307
ELC-10306
ELC-11638
ELC-12416
ELC-11850
ELC-11851
ELC-11837
ELC10955
ELC-10252
Electrical
ELECTRICAL
DESCRIPTION
RELAY, SAFETY, RAYTHEON SS501, K3/K2
RELAY, SET, CONTROL BD, K301
RELAY, SHUTTER CONTROL, KM11D, 12V
RELAY, SOLENOID, PLUNGER-STYLE
RELAY, W88KADX-1, CONTROL
RESISTOR, 1 MEG OHM, 2W
RESISTOR, 10-0 OHM, 1W, CARBON
RESISTOR, 1000 OHM 10W
RESISTOR, 20MEG, OHM
RESISTOR, 10MEG, R103
RESISTOR, 1K OHM, 25W
RESISTOR, 30MEG OHM, 5W, CONTROL 400
RESISTOR, 5 MEG OHM, 2%, RAYTHEON SS500
RESISTOR, 50 OHM, 25W, CONTROL
RESISTOR, 500 OHM, 200W, CONTROL 400
RESISTOR, DALE, 50W, .2 OHM
RF DRIVER, CL4
RF DRIVER, R/E, CL4
RF DRIVER, R/E, QUANTRONIX 331
RF DRIVER, REPAIR, CL4
RF DRIVER, REPAIR, QUANTRONIX 331
SCANNER, X/Y AXIS, AB/BAASEL LASER
SCR, 250RA170, CONTROL 400
SCR, 2N3898
SCR, 2N3899
SCR, 301UR160, CONTROL 400
SCR, 50RIA100
SCR, 50RIA60
SCR, 50RIA80
SCR, 550A, 1800V, CONTROL 400
SCR, CHARGE/DISCHARGE C391
SCR, CHARGING, 2N5207 (SS500)
SCR, CHARGING, C147PB (SS550)
SCR, CHARGING, RAYTHEON SS550 LATE
SCR, MR1396, CONTROL 400
SCR, PBR 100, CONTROL 400
SENSOR, FLOW, MDL150, LUMONICS JKMS830
SENSOR, FLOW, RAYTHEON, CHILLER
SENSOR, WATER FLOW, MEASUREMENT, AB/BAASEL
SHUTTER ASSEMBLY, SPECTRA PHYSICS 820, OLD STYLE, R/E
SHUTTER, ASSEMBLY, CONTROL 400
SHUTTER, FAIL-SAFE, CLC (OBS)
SHUTTER, HIGH SPEED, CONTROL I-MARK
SHUTTER, SAFETY, LEE LASER, 8250M
SOLENOID, PROCESS SHUTTER, LUMONICS
SOLENOID, SHUTTER, 24V, RAYTHEON SS550
SOLENOID, SHUTTER, CONTROL, RAYTHEON
SOLENOID, VALVE 2-WAY, ACTING GENERAL, 24V
SOLENOID, VALVE, 110V, RAYTHEON
PART NO.
ELC-12260
ELC-11852
ELC-10251
ELC-10393
ELC-10849
ELC-10268
ELC-10266
ELC-10267
ELC-16365
ELC-11858
ELC-10265
ELC-10848
ELC-13183
ELC-10831
ELC-10688
ELC-10284
ELC-10365
ELC-10375
ELC-11766
ELC-10843
ELC-11146
ELC-11828
ELC-10862
ELC-10309
ELC-10310
ELC-10860
ELC-10288
ELC-10691
ELC-10276
ELC-10702
ELC-10420
ELC-10286
ELC-16284
ELC-11095
ELC-10861
ELC-10311
ELC-12025
ELC-14732
ELC-11812
ELC-12813
ELC-10793
ELC-10830
ELC-10637
ELC-13799
PNE-14521
PNE-11739
PNE-10279
PNE-14335
PNE-12485
DESCRIPTION
SOLENOID, VALVE, 2-WAY, ALUM BODY, 24V, 50HZ
SOLENOID, VALVE, BRASSBODY, 24V, 50HZ
SOLENOID, VALVE, CONTROL 400
SOLENOID, VALVE, CONTROL ELITE
SOLENOID, VALVE, CONTROL KIOSK
SOLENOID, VALVE, LUMONICS
SOLENOID, VIEWING, RAYTHEON
SPARK GAP, ASSEMBLY, CONTROL
SPARK GAP, JK
SPARK GAP, QUANTRONIX
STRAP, GROUNDING, PLATED, GOLD, KWD
SWITCH, CKA, OVERTRAVEL
SWITCH, FLOW, PROTEUS, CLC400
SWITCH, HEAT SENSOR, CONTROL
SWITCH, LIMIT, HUFFMAN LASER
SWITCH, MICRO, JOYSTICK, ESI25
SWITCH, MAGNETIC PROXIMITY
SWITCH, PHOTO, SHUTTER, RAYTHEON SS550
SWITCH, POWER, QUANTRONIX
SWITCH, PRESSURE SENSOR, SPECTRA PHYSICS 975
SWITCH, PRESSURE, ESI
SWITCH, PUMP START, LEE650M P/S
SWITCH, ROCKER, CONTROL PANEL
SWITCH, ROTARY, S402, COHERENT 150
SWITCH, START, CONTROL PANEL
SWITCH, TEMP CONTROL, CONTROL
SWITCH, TEMPERATURE, AB/BAASEL LASER
SWITCH, WATER FLOW, SENSOR, AB/BAASEL LASER
SWITCH, WATER LEVEL, QUANTRONIX 116
THYRECTOR, CLC
TRANSFER ARM, SEAL KIT, LUMONICS
TRANSFORMER, 115V, CONTROL 400
TRANSFORMER, 5KVA, CONTROL
TRANSFORMER, CL12-24, CONTROL
TRANSFORMER, DP-241-8-28, ESI T2
TRANSFORMER, DPC-34-125, CONTROL
TRANSFORMER, FIRING BOARD, ESI
TRANSFORMER, HV, RAYTHEON SS500
TRANSFORMER, HV, APOLLO 580
TRANSFORMER, PULSE 1MH
TRANSFORMER, PULSE, CONTROL
TRANSFORMER, RAYTHEON, EG&G TR180C
TRANSFORMER, SIMMER, CONTROL
TRANSFORMER, SIMMER, RAYTHEON
TRANSFORMER, TRIGGER
TRANSFORMER, TRIGGER, DPC-180-24, RAYSS 550
TRANSFORMER, TRIGGER, PHOTON
TRANSISTOR, 2N2646
PART NO.
PNE-14334
PNE-14234
PNE-11019
PNE-11746
PNE-10278
PNE-12261
PNE-14356
ELC-10312
ELC-10417
ELC-10968
ELC-10622
ELC-10629
ELC-10604
ELC-10421
ELC-10817
ELC-10703
ELC-16319
ELC-14784
ELC-10969
ELC-12945
ELC-13233
ELC-14903
ELC-10665
ELC-11849
ELC-10271
ELC-10829
ELC-11811
ELC-11813
ELC-11633
ELC-10308
ELC-12262
ELC-10918
ELC-10343
ELC-10334
ELC-12106
ELC-10528
ELC-12798
ELC-13181
ELC-11743
ELC-10378
ELC-10828
ELC-13176
ELC-10701
ELC-11845
ELC-10597
ELC-11418
ELC-10926
ELC-13178
1 800 468 2326
408 321 8500
FAX: 408 321 8466
95
Electrical
ELECTRICAL
DESCRIPTION
TRANSISTOR, 2N6259, MATCHED PAIR
TRANSISTOR, MRF-454A
TRANSISTOR, SHUTTER, RAYTHEON
TRANSISTOR, POWER, COHERENT M815
TUBE, BALLAST, HV, COHERENT
TUBE, BALLAST, HV, PHOTON MPK10
TUBE, BALLAST, HV, PHOTON V505
TUBE, CROSSOVER
TUBE, KRYTRON, KN-2
1 800 468 2326
408 321 8500
FAX: 408 321 8466
96
PART NO.
ELC-11100
ELC-10324
ELC-11844
ELC-10773
ELC-11149
ELC-11148
ELC-11147
ELC-10452
ELC-13338
DESCRIPTION
TUBE, KRYTRON, KN-6
TUBING, DUST BELLOWS, 18”
TUBING, SHRINK, LAMP WIRE, RAY SS500
VACUUM GAUGE, 40 TORR, COHERENT
VACUUM GAUGE, 50 TORR, COHERENT
VALVE, VACUUM BALL, ROFIN SINAR 820
VALVE, VACUUM, ROFIN SINAR 820
V-BELT, 60HZ, COHERENT 150
WIRE, LAMP, RAY SS500
PART NO.
ELC-10277
ELC-10205
ELC-13413
ELC-11005
ELC-11653
ELC-12538
ELC-12543
ELC-11836
ELC-13412
Safety Glasses/Clear View Acrylic & Labels
SAFETY
GLASSES
DESCRIPTION
SAFETY, CLIP ON, YAG/CO2, S906
SAFETY, FILM, LASER-GARD
SAFETY, GLASSES, BROAD-BAND, YAG/CO2, DIODE
SAFETY, GLASSES, L228
SAFETY, GOGGLES, HeNe
SAFETY, GOGGLES, L696, YAG, CO2
SAFETY, GOGGLES, LOTG-810 DIODE
SAFETY, GOGGLES, LPG, CO2
SAFETY, GOGGLES, LPG, YAG
SAFETY, GOGGLES, LPG, YAG/KTP
SAFETY, GOGGLES, YAG
SAFETY, SPECTACLE, L596
SAFETY, SPECTACLES, BOLLE
SAFETY, SPECTACLES, CLT, YAG
PART NO.
EYE-14779
EYE-11292
EYE-12551
EYE-12393
EYE-11865
EYE-11803
EYE-12018
EYE-11657
EYE-11658
EYE-12792
EYE-10359
EYE-12443
EYE-13977
EYE-11665
DESCRIPTION
SAFETY, SPECTACLES, F5
SAFETY, SPECTACLES, LGT, YAG/CO2
SAFETY, SPECTACLES, LOTG, ARGON, ALIGN
SAFETY, SPECTACLES, LOTG, CO2 ONLY
SAFETY, SPECTACLES, LOTG, DIODE, ARGON
SAFETY, SPECTACLES, LOTG, IR-DIODE
SAFETY, SPECTACLES, LOTG, YAG/CO2
SAFETY, SPECTACLES, LOTG, YAG/KTP
SAFETY, SPECTACLES, LOTG-DYEII
SAFETY, SPECTACLES, LPS, CO2 ONLY
SAFETY, SPECTACLES, LSK, ARGON/KTP
SAFETY, SPECTACLES, LSK, YAG/KTP
SAFETY, SPECTACLES, YAG/CO2, PLASTIC
PART NO.
EYE-13976
EYE-12330
EYE-13811
EYE-11656
EYE-13637
EYE-14194
EYE-11655
EYE-14763
EYE-12459
EYE-11654
EYE-14821
EYE-14762
EYE-11579
CLEAR VIEW
ACRYLIC &
LABELS
DESCRIPTION
CURTAIN, LASER, SAFETY
LABEL, DANGER, 1.5” x .5”
LABEL, DATA, 2” x 2.25”
LABEL, WARNING, LASER (YELLOW BACKGROUND)
LABEL, WARNING, 3.5” x 1.875”
LABEL, WARNING, 1.5” x .5”
LABEL, WARNING, CLASS I 250W C02 1.06 MIC
LABEL, WARNING, CLASS I 400W 1064nm
LABEL, WARNING, CLASS I, ND:YAG 100W 1064nm
LABEL, WARNING, CLASS IV 400W 1064nm
PART NO.
WST-12788
WST-12514
WST-12516
WST-12530
WST-12517
WST-12515
WST-12476
WST-12478
WST-12474
WST-12479
DESCRIPTION
LABEL, WARNING, CLASS IV CO2 250 10.6 MIC
LABEL, WARNING, CLASS IV, ND:YG 100W 1064nm
LABEL, WARNING, LASER 2-3/4” x .875”
LABEL, WARNING, LASER (WHITE BACKGROUND)
SIGN, WARNING, 10” x 14”, PLASTIC
WINDOW, ACRYLIC, YAG, 32.50” x 43.25” x .140”
WINDOW, ACRYLIC, YAG, 32.50” x 43.25” x .250”
WINDOW, CLEAR-VIEW ACRYLIC, YAG
WINDOW, CLEAR-VIEW ACRYLIC, YAG, .25” THK
WINDOW, CLEAR-VIEW ACRYLIC, YAG, SPECIAL
PART NO.
WST-12477
WST-12475
WST-12472
WST-12473
WST-13059
WST-13887
WST-13739
WST-11608
WST-13730
WST-12363
1 800 468 2326
408 321 8500
FAX: 408 321 8466
97
Power Meters & Probes / IR & RF Detection
POWER
METERS &
PROBES
DESCRIPTION
POWER METER, CONSOLE, FIELDMASTER, COHERENT
SENSOR HEAD, 2500 WATT, COHERENT
SENSOR HEAD, THERMAL, FIELDMASTER, 200W, COHERENT
POWER METER, LABMASTER ULTIMA 1, COHERENT
POWER METER DISPLAY, ANALOG/DIGITAL, COHERENT
POWER METER, DETECTOR HEAD, LM-2500, COHERENT
POWER METER, DETECTOR HEAD, LM-1000, COHERENT
POWER METER, DETECTOR HEAD, LM-30V, COHERENT
POWER METER HEAD, REPAIR, COHERENT
POWER METER, DISPLAY, AN-2, OPHIR
POWER METER, DISPLAY, LASERSTAR, OPHIR
POWER METER, DISPLAY, NOVA, OPHIR
POWER METER, HEAD, 1500W, OPHIR
POWER METER, HEAD, FL250A, OPHIR
POWER METER, HEAD, F150-A, OPHIR
POWER METER, HEAD, 0-100W, OPHIR
POWER METER, LASERMATE 100, COHERENT
POWER METER, LASERMATE 150, ANALOG/DIG, COHERENT
PART NO.
TST-11134
TST-14128
TST-14031
TST-10950
TST-13787
TST-10951
TST-10489
TST-11926
TST-11778
TST-13731
TST-11877
TST-11920
TST-13963
TST-11876
TST-12789
TST-11919
TST-10442
TST-11468
TST-10443
TST-10444
TST-10445
DESCRIPTION
POWER METER, POWER WIZARD, PW-250
POWER METER, RAYTHEON
POWER METER, FIT 1, 0-50W, LASERPOINT
POWER METER, FIT 3, 0-150W,LASERPOINT
POWER METER, LP 1.5, LASERPOINT
POWER METER, LP 5.0, LASERPOINT
ADAPTER, OPTIONAL AC, LASERMATE, COHERENT
POWER PROBE, 4000W, CO2
POWER PROBE, 2000W, CO2
POWER PROBE, 1000W
POWER PROBE, 500W, YAG, CO2
POWER PROBE, 100W
POWER PROBE, 50W
POWER PROBE, 20W
POWER PROBE, DIGITAL, 100-1100W, YAG
POWER PROBE, HI-POWER, CONICAL HEAD
KIT, DIGITAL, POWER PROBE, CO2
KIT, DIGITAL, POWER PROBE, YAG, 30/H1-Y
KIT, DIGITAL, POWER PROBE, YAG, 30/H3-Y
SENSOR HEAD, LASERMATE, 100mW-100W, COHERENT
SENSOR HEAD, LASERMATE, 100mW-150W, COHERENT
PART NO.
TST-11818
TST-14909
TST-16394
TST-16397
TST-16398
TST-16399
TST-13788
TST-14744
TST-12401
TST-11048
TST-10502
TST-10438
TST-11673
TST-12068
TST-11793
TST-11807
TST-12881
TST-11731
TST-14530
TST-13803
TST-13802
PART NO.
DESCRIPTION
THERMAL IMAGE PLATE, RESURFACE
THERMAL IMAGE PLATE, WATER COOLED
THERMAL IMAGE PLATE, YAG
TISSUE, LENS, 7” x 11”
TISSUE, LENS, CLEANING PACKET
TUBE, HeNe
TUBE, HeNe, UNIPHASE
TUBE, HeNe, UNIPHASE, 1107P
TUBE, HeNe, XMR
ULTRAVIOLET LAMP, 110V
ULTRAVIOLET LAMP, 220V
ULTRAVIOLET LAMP, REPLACEMENT
RF DETECTION
RF WATT METER
RF RESISTOR, DUMMY LOAD, 100W
ELEMENT, 2-30MHZ
ELEMENT, 25-60MHZ
ELEMENT, 25-60MHZ, 25 WATT
ELEMENT, 50-125MHZ
CABLE, RF, BNC
PART NO.
TST-10614
TST-14148
TST-10431
TST-13172
TST-11006
TST-10638
TST-11769
TST-12787
TST-10837
TST-10436
TST-13589
TST-12919
IR & RF
DETECTION
DESCRIPTION
IR DETECTION
AUTOCOLLIMATOR W/MOUNT
AUTOCOLLIMATOR W/O MOUNT
MOUNT, ASSEMBLY, AUTOCOLLIMATOR TYPE
MOUNT, AUTOCOLL, W/KNOB, CONTROL STYLE
MOUNT, AUTOCOLLIMATOR, ESI STYLE
MOUNT, AUTOCOLLIMATOR, QUANTRONIX STYLE
MOUNT, SPACER, AUTOCOLLIMATOR
BEAM PROBE, SURFACE 1, CW YAG
BEAM PROBE, SURFACE 2, PULSED YAG
BEAM PROBE, SURFACE 3, CW YAG
ILLUMINATOR CARD, YAG
ILLUMINATOR CARD, RED-LINE
IR VIEWER
KIT, IR PLATE, BEAM PROBE, UV LAMP
KIT, OPTICS CLEANING
KIT, TEST EQUIPMENT, CO2
KIT, TEST EQUIPMENT, YAG
ALIGNMENT PAPER, YAG
MODE PAPER, (20 PCS.), CO2
THERMAL IMAGE PLATE, CO2
1 800 468 2326
408 321 8500
FAX: 408 321 8466
98
TST-10590
TST-10395
TST-10627
TST-10229
TST-11457
TST-11458
TST-10228
TST-10432
TST-10433
TST-10434
TST-10720
TST-16282
TST-10437
TST-10435
TST-10839
TST-11469
TST-11470
TST-11359
TST-10794
TST-10613
TST-10425
TST-10426
TST-10427
TST-10428
TST-12786
TST-10429
TST-10430
Video Monitors / Cameras
VIDEO
MONITORS /
CAMERAS
DESCRIPTION
CAMERA KIT, SONY
CAMERA, 1/2”, CCD MONOCHROME
CAMERA, 1/2”, COLOR, HIGH RESOLUTION
CAMERA, 1/3”, CCD, COLOR, 12V
CAMERA, B & W, DLI
POWER SUPPLY, CAMERA, DLI
CAMERA, CCD, 1/3” 12V, COLOR
CAMERA, CCD, DLI
POWER SUPPLY, CAMERA, CCD, DLI
CAMERA, CCD, SONY
POWER SUPPLY, SONY CCD CAMERA
MONITOR, 12”, SONY
MONITOR, 12” B & W W/BNC CONN.
MONITOR, 14”, COLOR, SONY
MONITOR, 14”, FLAT SCREEN
MONITOR, 17”, FLAT SCREEN
MONITOR, 9”, COLOR
MONITOR, 9”, HIGH RESOLUTION
MONITOR, B & W, 12”
MONITOR, B & W, 9”
MONITOR, MONO, 14”
MONITOR, VIDEO, NTSC, B & W
PART NO
VID-14515
VID-12694
VID-13167
VID-12745
VID-11432
VID-11433
VID-12855
VID-11534
VID-11536
VID-15878
VID-15055
VID-14462
VID-14026
VID-13171
VID-13719
VID-14225
VID-12859
VID-12693
VID-11473
VID-10620
VID-13898
VID-11672
1 800 468 2326
408 321 8500
FAX: 408 321 8466
99
CO2 Lenses
CO2 LENSES
DESCRIPTION
LENS, 15 METER FL, 1.5”, ZnSe, PL/CX, MITS
LENS, 13.0” FL, 1.5”, ZnSe, PL/CX, MOUNTED
LENS, 11.8” FL, 2.0”, Ge, CYLINDRICAL
LENS, 10.0” FL, 2.5”, ZnSe, POS/MEN, 4mm
LENS, 10.0” FL, 2.0”, ZnSe, PL/CX
LENS, 10.0” FL, 1.5”, ZnSe, PL/CX, 8mm ET
LENS, 10.0” FL, 1.5”, GaAs, PL/CX
LENS, 10.0” FL, 1.1”, ZnSe, POS/MEN, MOUNTED
LENS, 10.0” FL, 1.1”, ZnSe, POS/MEN
LENS, 10.0” FL, 1.1”, Ge, POS/MEN, MOUNTED
LENS, 10.0” FL, 1.1”, Ge, POS/MEN
LENS, 10.0” FL, 1.1”, GaAs, POS/MEN, MOUNTED
LENS, 10.0” FL, 1.1”, GaAs, POS/MEN
LENS, 10.0” FL, 1.1”, GaAs, PL/CX, MOUNTED
LENS, 7.87” FL, 2.0”, GE, POS/MEN, 4mm
LENS, 7.63” FL, 1.5”, ZnSe, PL/CX, 7.62mm ET
LENS, 7.5” FL, 2.0”, ZnSe, POS/MEN, 9.7mm ET
LENS, 7.5” FL, 2.0”, ZnSe, PL/CX, 8mm
LENS, 7.5” FL, 1.5”, ZnSe, POS/MEN, 7.3mm ET
LENS, 7.5” FL, 1.5”, ZnSe, DIFFRACTIVE, 6mm
LENS, 7.5” FL, 1.1”, ZnSe, PL/CX, 3
LENS, 5.0” FL, 2.0”, ZnSe, CYLINDRICAL
1 800 468 2326
408 321 8500
FAX: 408 321 8466
100
PART NO.
CFL-14516
CFL-11290
CFL-11636
CFL-11666
CFL-10465
CFL-10601
CFL-14804
CFL-10462
CFL-10461
CFL-10564
CFL-10473
CFL-10550
CFL-10455
CFL-10565
CFL-10474
CFL-10563
CFL-10472
CFL-10549
CFL-10454
CFL-14746
CFL-12238
CFL-13251
CFL-11935
CFL-11363
CFL-12502
CFL-11509
CFL-11722
CFL-11808
CFL-10634
CFL-12079
CFL-10460
CFL-13689
CFL-11195
CFL-10562
CFL-14810
CFL-10471
CFL-10548
CFL-11116
CFL-10371
CFL-11652
CFL-10560
CFL-11676
CFL-13716
CFL-11417
CFL-12124
CFL-10464
CFL-12771
CFL-11508
CFL-10874
CFL-11809
DESCRIPTION
LENS, 5.0”FL, 1.5”, ZnSe, POS/MEN, 2.4mm
LENS, 5.0” FL, 1.5”, ZnSe, PL/CX, 8mm, MOUNTED
LENS, 5.0” FL, 1.5”, ZnSe, LONG LIFE, STD.
LENS, 5.0” FL, 1.1”, ZnSe, PL/CX, .236” ET
LENS, 5.0” FL, 1.1”, ZnSe, DIFFRACTIVE, MOUNTED
LENS, 5.0” FL, 1.1”, ZnSe, DIFFRACTIVE, 3mm ET
LENS, 5.0” FL, .750”, ZnSe, PL/CX
LENS, 4.0” FL, 2.0”, GE, POS/MEN, 3mm
LENS, 3.75” FL, 1.5”, ZnSe, POS/MEN, ZnSe
LENS, 3.75” FL, 1.1”, ZnSe, POS/MEN FL
LENS, 3.75” FL, 1.1”, ZnSe, PL/CX, 2.8mm
LENS, 3.75” FL, 1.1”, ZnSe, DIFFRACTIVE
LENS, 3.5” FL, 1.1”, ZnSe, POS/MEN, ZnSe
LENS, 3.0” FL, 1.1”, GaAs, POS/MEN, HARD CTD
LENS, 3” FL, 1.1”, GaAs, POS/MEN, MOUNTED, HARD CTD
LENS, 2.5’ FL, 1.1”, ZnSe, PL/CX, 2mm
LENS, 2.5” FL, .625” DIA, ZnSe, PL/CX
PART NO.
CFL-10513
CFL-12451
CFL-11081
CFL-11217
CFL-11296
CFL-10986
CFL-12424
CFL-10459
CFL-11127
CFL-10844
CFL-11068
CFL-10458
CFL-10561
CFL-12499
CFL-10062
CFL-10546
CFL-11115
CFL-11352
CFL-11094
CFL-10060
CFL-12441
CFL-12697
CFL-10470
CFL-10559
CFL-10058
CFL-10547
CFL-10054
CFL-14828
CFL-13557
CFL-12997
CFL-11784
CFL-10330
CFL-11089
CFL-10558
CFL-10469
CFL-13080
CFL-11729
CFL-11328
CFL-10457
CFL-10557
CFL-10468
CFL-10545
CFL-10332
CFL-11500
CFL-14526
CFL-11499
CFL-10059
CFL-13461
CFL-10463
CFL-10785
CO2 Lenses
CO2 LENSES
DESCRIPTION
LENS, 2.5” FL, 1.5”, ZnSe, ASPHERIC
LENS, 2.5” FL, 1.1”, GaAs, POS/MEN, MOUNTED, HARD CTD
LENS, 2.5” FL, 1.1”, GaAs, POS/MEN, HARD CTD
LENS, -2.5” FL, .075”, ZnSe, PL/CC
LENS, 2.0” DIA, Ge, MARKER
PART NO.
CFL-10697
CFL-12780
CFL-10456
CFL-10937
CFL-14030
CFL-10786
CFL-10331
CFL-10554
CFL-10061
CFL-10543
CFL-11114
CFL-13418
CFL-13852
CFL-10556
CFL-10052
CFL-11364
CFL-10555
CFL-11267
CFL-10056
CFL-10544
CFL-10053
CFL-13901
CFL-16286
CFL-10542
CFL-10138
CFL-10593
CFL-11713
CFL-11535
DESCRIPTION
LENS, 1.5” FL, 1.5”, ZnSe, DIFFRACTIVE, 3mm
LENS, 1.5” FL, 1.5”, ZnSe, ASPHERIC
LENS, 1.5” FL, .984”, Ge, POS/MEN
LENS, 200mm FL, 2.0”, Ge, POS/MEN
LENS, 200mm FL, 2.0”, Ge, PL/CX
LENS, 110mm FL, 15.5mm
LENS, 110mm FL, 22mm DIA
LENS, 48mm FL, 15.5 mm
LENS, 48mm FL, 22mm DIA
LENS, COLIMATOR, -726mm FL, 1.1”, GaAs, MTD
MOUNT, LENS, ASSEMBLY, 1.1”
MOUNT, LENS, ASSEMBLY, CO2
MOUNT, LENS, GASKET, LARGE, CO2, 1.1”
MOUNT, LENS, GASKET, SMALL, CO2, 1.1”
MOUNT, LENS, HOLDER, CO2, 1.1”
MOUNT, LENS, O-RING, CO2, 1.1”
MOUNT, LENS, RETAINER, CO2, 1.1”
MOUNT, LENS, SLEEVE, CO2, 1.1”
WIRE, INDIUM
PART NO.
CFL-13509
CFL-14202
CFL-11728
CFL-10551
CFL-10113
CFL-11772
CFL-10553
CFL-10467
CFL-10552
CFL-10466
CFL-11275
CFL-16337
CFL-11265
CFL-11264
CFL-11206
CFL-11186
CFL-11205
CFL-11187
CFL-16261
CFL-10927
CFL-11017
CFL-10998
CFL-10997
CFL-10524
CFL-10999
CFL-10526
CFL-10525
CFL-10674
CO2 LENS
PROTECTORS
DESCRIPTION
PROTECTOR,LENS,1.5"DIA,.236".CTD,KCL
PROTECTOR LENS,1.5"DIA,KCL,CTD
PROTECTOR,LENS,1.5"DIA,6mm,KCL,UNC
PART NO.
LPR-11079
LPR-10517
LPR-11771
LPR-11875
DESCRIPTION
PROTECTOR LENS,1.1"DIA,.160",CTD,KCL
PROTECTOR LENS,1.1"DIA,5mm,KCL,UNC
PROTECTOR,LENS,1.1"DIA,4mmTHK,KCL,UNC
PART NO.
LPR-14778
LPR-11128
LPR-11733
LPR-11773
1 800 468 2326
408 321 8500
FAX: 408 321 8466
101
CO2 Mirrors
CO2 MIRRORS
DESCRIPTION
MANUFACTURER
AMADA
MIRROR, COLLIMATING, 2.0”, 10Mcc, Cu, AMADA
MIRROR, COLLIMATING, 2.0”, 15Mcx, Cu, AMADA
MIRROR, REAR, AMADA FANUC 1500W
APOLLO
MIRROR, OUTPUT, APOLLO 580
MIRROR, REAR, APOLLO 580
COHERENT
MIRROR, 1.5” DIA, Si, 99.7%R, P-PLANE
MIRROR, BEND, 1.75” DIA, 4mm
MIRROR, CORNER, 1.5” DIA, 9.7mm
MIRROR, CORNER, CYLINDRICAL, COHERENT ARROW
MIRROR, CORNER, SPHERICAL, COH ARROW
MIRROR, FOLD, 1.5” x 28mm x .380”, Si, CYLINDRICAL
MIRROR, FOLD, 1.5” x 32mm x .380”, Si, SPHERICAL
MIRROR, OUTPUT, COHERENT ARROW
MIRROR, OUTPUT, COHERENT ARROYW/780
MIRROR, OUTPUT, COHERENT E7000
MIRROR, OUTPUT, COHERENT S48
MIRROR, OUTPUT, 1.75” DIA, Ge, 85%R
MIRROR, OUTPUT, 1.5” DIA, 27%R
MIRROR, OUTPUT, 1.5” DIA, 27%R, ZnSe, 30Mcc
MIRROR, OUTPUT, 1.5” DIA, 57%R, 20Mcc
MIRROR, OUTPUT, 1.5” DIA, ZnSe, 75%R
MIRROR, REAR, 1.75” DIA, 4mm, 99.5%R
MIRROR, REAR, 1.5” DIA, 10Mcc, Ge, 99%R
MIRROR, REAR, 1.5” DIA, 10Mcc, Ge, 99.5%R
MIRROR, REAR, COH S48
MIRROR, REAR, COHERENT ARROW
MIRROR, REAR, COHERENT ARROW/780
ELECTROX
MIRROR, BEND, 50mm DIA, 10mm, ELECTROX
MIRROR, BEND, 75mm DIA, 15mm, ELECTROX
MIRROR, CORNER, 50mm DIA, PRC/ELECTROX
MIRROR, .25 WAVE, 50mm DIA, 10mm, ELECTROX
MIRROR, OUTPUT, 65%, 60Mcc, ELECTROX
MIRROR, OUTPUT, 65%, PL/PL, ELECTROX
MIRROR, OUTPUT, 75%, PL/PL, ELECTROX
MIRROR, OUTPUT, MOUNTED, ELECTROX
MIRROR, REAR, MOUNTED, ELECTROX
MIRROR, REAR, MOUNTED, ELECTROX CO2
FERRANTI
MIRROR, OUTPUT, FERRANTI MFK
MIRROR, OUTPUT, FERRANTI MF400
MIRROR, POLARIZER, 1/8 WAVE, FERRANTI MF400
MIRROR, POLARIZER, 1/8 WAVE, FERRANTI MFK
MIRROR, POLARIZER, CAVITY, FERRANTI MF400P
MIRROR, POLARIZER, CAVITY, FERRANTI MFK
1 800 468 2326
408 321 8500
FAX: 408 321 8466
102
PART NO.
CMR-13540
CMR-13539
CMR-12335
CMR-10695
CMR-10694
CMR-10987
CMR-10035
CMR-10033
CMR-12325
CMR-12326
CMR-12369
CMR-12370
CMR-12323
CMR-14918
CMR-11145
CMR-11475
CMR-10044
CMR-10048
CMR-12225
CMR-10051
CMR-10344
CMR-10047
CMR-10046
CMR-10045
CMR-10093
CMR-10043
CMR-10345
CMR-10042
CMR-10041
CMR-12899
CMR-12324
CMR-14919
CMR-11277
CMR-11403
CMR-11140
CMR-11278
CMR-11282
CMR-11142
CMR-11276
CMR-11782
CMR-11781
CMR-11141
CMR-11179
CMR-11106
CMR-11203
CMR-11191
CMR-11202
CMR-11190
DESCRIPTION
MANUFACTURER
FERRANTI (Continued)
MIRROR, REAR, CAVITY, FERRANTI MF400
MIRROR, REAR, CAVITY, FERRANTI MFK
MIRROR, SHUTTER, FERRANTI MF400/400P
MIRROR, SHUTTER, FERRANTI MFK
GSI LUMONICS
MIRROR, OUTPUT, LUMONICS 920
MIRROR, OUTPUT, REBUILD, LUMONICS
MIRROR, OUTPUT, REBUILD, LUMONICS, 85%R
MIRROR, REAR, REBUILD, LUMONICS
MIRROR, REAR, REBUILD, LUMONICS 940
MIRROR, REAR, REBUILD, LUMONICS, 15Mcc
MIRROR, REAR, REBUILD, LUMONICS, 20Mcc
MIRROR, STEERING, LUMONICS 920
MIRROR, STEERING, REBUILD, LUMONICS
LASER TECHNIQUES
MIRROR, OUTPUT, R/E, LASER TECHNIQUES, 80%R
MIRROR, OUTPUT, REBLD, LASER TECHNIQUES, 60%
MIRROR, OUTPUT, REBLD, LASER TECHNIQUES, 70%
MIRROR, REAR, REBLD, LASER TECHNIQUES, CU
MAZAK
MIRROR, 1/4 WAVE, 1.5” DIA, .250”, Cu, MAZAK
MIRROR, BEND, INTERNAL, MAZAK
MIRROR, FOLD, 1.75” DIA, .375”, Si, MAZAK
MIRROR, OUTPUT, 1.1” DIA, ZnSe, 60%R, MAZAK
MIRROR, REAR, 1.1”, 20Mcc, Ge, 99.5%R, MAZAK
MITSUBISHI
MIRROR, 1/4 WAVE, 2” DIA, .200”
MIRROR, 2.0” DIA, 5mm, .25 WAVE DEPOL
MIRROR, BEND, 0 PHASE, 3.0” DIA, .250” THK, Cu
MIRROR, BEND, 0 PHASE, 60mm DIA, 6mm, Cu
MIRROR, BEND, 60mm DIA, 6mm, 14Mcc, Cu
MIRROR, BEND, 50mm DIA, 5mm, Cu
MIRROR, FOLD, 1.1” DIA, FLAT, EP, SI
MIRROR, FOLD, 1.1” DIA, FLAT, HC, Cu
MIRROR, FOLD, 50mm DIA, 9mm, Cu
MIRROR, OUTPUT, 1.5” DIA, 20Mcc, ZnSe, 30%R
MIRROR, REAR, 1.5” DIA, 20Mcc, ZnSe, 99%R
PHOTON
MIRROR, FOLD, 1.0” DIA, 3mm, 10Mcc
MIRROR, FOLD, 1.0" DIA, 3mm, PS, SI, 20Mcc
MIRROR, FOLD, 1.0” DIA, FLAT, PS, PHOTON
MIRROR, FOLD, 1.5”, .160” THK, Si, PHOTON 1500
MIRROR, FOLD, 1.5” DIA, 4mm
MIRROR, FOLD, 2.0” DIA, 5mm, EP
MIRROR, OUTPUT, 1.0” DIA, 3MM, 60%R
MIRROR, OUTPUT, V1200
MIRROR, REAR, 1.0” DIA, 3mm, 10Mcc
MIRROR, REAR, 1.0” DIA, 3mm, 99.5%, GE, 2OMCC
WINDOW, OUTPUT, 1” DIA, 3mm, ZnSe
PART NO.
CMR-11105
CMR-11188
CMR-11204
CMR-11189
CMR-11832
CMR-10039
CMR-11129
CMR-10038
CMR-11063
CMR-11300
CMR-11411
CMR-11751
CMR-10985
CMR-11510
CMR-11266
CMR-10872
CMR-11270
CMR-13510
CMR-13454
CMR-12902
CMR-12903
CMR-13452
CMR-11174
CMR-11077
CMR-14822
CMR-11609
CMR-11610
CMR-11406
CMR-11177
CMR-11332
CMR-11405
CMR-11175
CMR-11566
CMR-11756
CMR-11176
CMR-10095
CMR-10714
CMR-10094
CMR-12453
CMR-10067
CMR-10037
CMR-10049
CMR-10055
CMR-10040
CMR-10713
CMR-10063
CO2 Mirrors
CO2 MIRRORS
DESCRIPTION
MANUFACTURER
ROFIN SINAR
MIRROR, 2.0” DIA, Si, 99.5%, 45 DEG, ES
MIRROR, CORNER, ROFIN SINAR 1700
MIRROR, FOLD, ROFIN SINAR 610
MIRROR, OUTPUT, ROFIN SINAR 1200/1700
MIRROR, OUTPUT, ROFIN SINAR 500
MIRROR, OUTPUT, ROFIN SINAR 610
MIRROR, POLARIZER, ROFIN SINAR 500
MIRROR, POLARIZER, ROFIN SINAR 610
MIRROR, REAR, ROFIN SINAR 1200/1700
MIRROR, REAR, ROFIN SINAR 500
MIRROR, REAR, ROFIN SINAR 610
SPECTRA PHYSICS
MIRROR, 1/4 WAVE, 2” DIA, .375”, SPECTRA PHYSICS 820
MIRROR, BEND, 2” DIA, .375”, MOLY, SPECTRA PHYSICS 820
MIRROR, BEND, Cu, EC, SPECTRA PHYSICS 825
MIRROR, FOLD, Cu, SPECTRA PHYSICS 971/975
MIRROR, FOLD, CU, SPECTRA PHYSICS 971/975, REWORK
MIRROR, FOLD, SPECTRA PHYSICS 820/825/850
MIRROR, OUTPUT, SPECTRA PHYSICS 810
MIRROR, OUTPUT, SPECTRA PHYSICS 820, MOUNTED
MIRROR, OUTPUT, SPECTRA PHYSICS 825/850
MIRROR, POLARIZER, SPECTRA PHYSICS 810/971
MIRROR, POLARIZER, SPECTRA PHYSICS 820/825
MIRROR, REAR, SPECTRA PHYSICS 810
MIRROR, REAR, SPECTRA PHYSICS 973/975
PLATE, PYREX, SPECTRA PHYSICS 975
WINDOW, OUTPUT, SPECTRA PHYSICS 820
WINDOW, OUTPUT, SPECTRA PHYSICS 820, MOUNTED
TRUMPF/HAAS
MIRROR, OUTPUT, TRUMPF 5KW, MOUNTED
MISCELLANEOUS
BEAMSPLITTER, 1.5”, .120”, ZnSe, INSENSITIVE
BEAMSPLITTER, 50/50, 1.5”, S-POL, EDI
BEAMSPLITTER, 50/50, 1.5” DIA, P-POL
BEAMSPLITTER, 50/50, 1.5” DIA, S-POL
BEAMSPLITTER, 50/50, 1.5’ DIA, .120”, P-POL
BEAMSPLITTER, 50/50, 1.75”.160”, ZnSe, P-POL
BEAMSPLITTER, 50/50, 1.75”.160”, ZnSe, U-POL
BEAMSPLITTER, 50/50, 2.0”, .160”, ZnSe, S-POL
MIRROR, 1.0” DIA, 20Mcc, 99%R
MIRROR, 1.026”ALUMINIZED ELLIPTICAL
PART NO.
CMR-10699
CMR-10036
CMR-11183
CMR-11399
CMR-10707
CMR-11315
CMR-11400
CMR-11313
CMR-11398
CMR-10708
CMR-11314
CMR-11401
CMR-10699
CMR-10698
CMR-10945
CMR-10652
CMR-11151
CMR-10647
CMR-10645
CMR-10648
CMR-10806
CMR-11065
CMR-10643
CMR-11196
CMR-10642
CMR-10644
CMR-10640
CMR-10649
CMR-11067
CMR-10641
CMR-11208
CMR-11905
CMR-10646
CMR-10805
CMR-11066
CMR-11197
CMR-11640
CMR-13447
CMR-12417
CMR-11787
CMR-11786
CMR-13962
CMR-13890
CMR-14747
CMR-14749
CMR-10494
CMR-12783
DESCRIPTION
MANUFACTURER
MIRROR, 1.5” DIA, Si, 99.7%R, P-PLANE
MIRROR, 1.5” DIA, ZnSe, 27%R, 10Mcc, EFA53
MIRROR, 1/4 WAVE PHASE RETARDER, 1.0”, Si
MIRROR, 1/4 WAVE, 1.0” DIA, .120”
MIRROR, 1/4 WAVE, 2.0” DIA, .200”, Cu
MIRROR, 1/4 WAVE, 3.0” DIA, .250”THK, Si
MIRROR, BEAM COMBINER, 1.0”, .079” THK, GaAs
MIRROR, BEND, 0 PHASE, 1.0” DIA
MIRROR, BEND, 0 PHASE, 1.5” DIA, 4mm
MIRROR, BEND, 0 PHASE, 1.75” DIA.
MIRROR, BEND, 0 PHASE, 1.969” DIA, .394”, Cu
MIRROR, BEND, 0 PHASE, 2.0” DIA, .375”, Si
MIRROR, BEND, 0 PHASE, 2.0” DIA, 5mm THK
MIRROR, BEND, 0 PHASE, 3.0” DIA, .250”THK, Si
MIRROR, BEND, 0 PHASE, 40mm DIA, Cu
MIRROR, BEND, 0 PHASE, 60mm DIA, 6mm, Cu
MIRROR, BEND, 0 PHASE, 60mm, 10mm, Cu
MIRROR, BEND, 0 PHASE, ASSEMBLY
MIRROR, BEND, 1.75” DIA, 4mm, EXTERNAL, MOUNTED
MIRROR, BEND, 1/4 WAVE, 50mm DIA, Cu
MIRROR, BEND, 2” DIA, .200”, MOLY
MIRROR, BEND, 2.0” DIA, .200”THK, ELLIPTICAL
MIRROR, BEND, 2.0” DIA, .375”, EP
MIRROR, BEND, 2.0” DIA, 5mm THK, ES
MIRROR, BEND, 3” DIA, .25”, ES
MIRROR, BEND, 50mm DIA, 5mm, Cu
MIRROR, BEND, 60mm DIA, 6mm, 14Mcc, Cu
MIRROR, BEND, 60mm x 6mm, Si, 99.8%R
MIRROR, BEND, 75mm DIA, 25mm
MIRROR, BEND, REWORK, MOLY
MIRROR, CORNER, 2.0” DIA, .375”, Cu, PRC2000
MIRROR, CORNER, 1.5” DIA, 4mm THK
MIRROR, CORNER, 1.5” DIA, 4mm, FLAT
MIRROR, CORNER, 1.5” DIA, 9.7mm
MIRROR, CORNER, 1.5” DIA, 9.7mm, PS
MIRROR, FOLD, 1.0” DIA, 3mm, PS, SI, 20Mcc
MIRROR, FOLD, 1.1” DIA, FLAT, EP, SI
MIRROR, FOLD, 1.1” DIA, FLAT, HC, Cu
MIRROR, FOLD, 1.5”, .160” THK, FLAT, POL.LOCK
PART NO.
CMR-10400
CMR-10987
CMR-10291
CMR-10710
CMR-13900
CMR-16285
CMR-11174
CMR-14824
CMR-11914
CMR-11077
CMR-12774
CMR-10693
CMR-10569
CMR-10535
CMR-12992
CMR-14823
CMR-11635
CMR-11090
CMR-11020
CMR-14822
CMR-11749
CMR-14151
CMR-11609
CMR-12779
CMR-10583
CMR-11285
CMR-10035
CMR-11214
CMR-12015
CMR-11557
CMR-12236
CMR-11284
CMR-11864
CMR-10905
CMR-11406
CMR-11610
CMR-13234
CMR-13173
CMR-10700
CMR-16262
CMR-11135
CMR-10654
CMR-10033
CMR-10721
CMR-10095
CMR-10030
CMR-10714
CMR-11177
CMR-11332
CMR-12168
1 800 468 2326
408 321 8500
FAX: 408 321 8466
103
CO2 Mirrors
CO2 MIRRORS
DESCRIPTION
MANUFACTURER
MIRROR, FOLD, 1.5” DIA, 4mm
MIRROR, FOLD, 1.5” x 28mm x .380”, Si, CYLINDRICAL
MIRROR, FOLD, 1.5” x 32mm x .380”, Si, SPHERICAL
MIRROR, FOLD, 2.0” DIA, 5mm, EP
MIRROR, FOLD, 2.0” DIA, 5mm, PS
MIRROR, FOLD, 50mm DIA, 9mm, Cu
MIRROR, ITR, 1.5”, Cu, ES
MIRROR, MODULE, FOC, 125mm FL, 25mm
MIRROR, MODULE, FOC, FLAT, 25mm
MIRROR, MODULE, FOC, FLAT, 50mm
MIRROR, OUTPUT, 1”, 60%, ZnSe, 7Mcc
MIRROR, OUTPUT, 1.0” DIA, .236”, ZnSe, 55%R
MIRROR, OUTPUT, 1.0” DIA, ZnSe, .236”, MTD
MIRROR, OUTPUT, 1.0” DIA, 10Mcc/7.5Mcx, 80%R
MIRROR, OUTPUT, 1.0” DIA, 20Mcc/20Mcx, 50%R
MIRROR, OUTPUT, 1.0” DIA, 3mm, 60%R
MIRROR, OUTPUT, 1.1”, 20Mcc/15Mcx, ZnSe, 50%R
MIRROR, OUTPUT, 1.1”, ZnSe, 20Mcc, 70%R
MIRROR, OUTPUT, 1.1” DIA, .12”, 65%R
MIRROR, OUTPUT, 1.1” DIA, 81%R, Ge
MIRROR, OUTPUT, 1.1” DIA, ZnSe, .120”, MTD
MIRROR, OUTPUT, 1.5” DIA, 10Mcc, ZNSE, 17%R
MIRROR, OUTPUT, 1.5” DIA, 10Mcc/15Mcx, ZnSe
1 800 468 2326
408 321 8500
FAX: 408 321 8466
104
PART NO.
CMR-10067
CMR-12369
CMR-12370
CMR-10037
CMR-10681
CMR-11405
CMR-14150
CMR-11304
CMR-11309
CMR-11308
CMR-11637
CMR-11303
CMR-11307
CMR-11302
CMR-11306
CMR-11301
CMR-11305
CMR-11310
CMR-10385
CMR-14045
CMR-16338
CMR-13068
CMR-11137
CMR-11318
CMR-11138
CMR-10049
CMR-13453
CMR-14149
CMR-10050
CMR-10045
CMR-10046
CMR-11025
CMR-10047
CMR-16315
CMR-14983
CMR-11756
CMR-11566
CMR-14212
CMR-11175
DESCRIPTION
MANUFACTURER
MIRROR, OUTPUT, 1.5” DIA, 27%R, ZnSe, 30Mcc
MIRROR, OUTPUT, 1.5” DIA, 57%R, 20Mcc
MIRROR, OUTPUT, 1.5” DIA, 75%R, Ge
MIRROR, OUTPUT, 1.5” DIA, ZnSe, 75%R
MIRROR, OUTPUT, 1.75” DIA, Ge, 85%R
MIRROR, OUTPUT, V1200
MIRROR, PLATE, ASSEMBLY
MIRROR, REAR, 1.0” DIA, 3mm, 10Mcc
MIRROR, REAR, 1.0” DIA, 3mm, 10Mcc, 99%R, Ge
MIRROR, REAR, 1.0” DIA, 3mm, 99.5%, GE, 2OMCC
MIRROR, REAR, 1.0” DIA, 3mm, Ge, 99%R, FLAT
MIRROR, REAR, 1.1” DIA, 10Mcc, SI, 99%R
MIRROR, REAR, 1.1” DIA, 20Mcc, SI, ES, 3.1mm THK
MIRROR, REAR, 1.1” DIA, 20Mcc, GaAs, .120”, MTD
MIRROR, REAR, 1.1” DIA, 20Mcc, GE, 99.5%R
MIRROR, REAR, 1.1” DIA, 99.5%R, Ge
MIRROR, REAR, 1.1” DIA, Si, FLAT, HR
MIRROR, REAR, 1.5” DIA, 20Mcc, ZnSe, 99%R
MIRROR, REAR, 1.75” DIA, 4mm, 99.5%R
MIRROR, REAR, 1.75” DIA, 4mm, Ge, 99%R
MIRROR, REAR, 2.0” DIA, 99.5%R, .375”THK
MIRROR, RECTANGLE, 70mm x 45mm x 8mm, BK7, HR
MIRROR, REWORK, 2.0” DIA, 5mm-10mm THK, Cu
MIRROR, SQUARE, 60mm x 60mm x 8mm, BK7, 90%R
RING, RETAINER, O PHASE ASSEMBLY
WEDGE, 1” x 1”SQ x .130” THK, ZnSe, EDI
WEDGE, 1.5” DIA, ZnSe, EDI
WINDOW, 1.1” DIA, .120” THK, ZnSe
WINDOW, OUTPUT, .750” DIA, 2mm, ZnSe
WINDOW, OUTPUT, 1” DIA, 3mm, ZnSe
PART NO.
CMR-10048
CMR-12225
CMR-10051
CMR-11155
CMR-10344
CMR-10044
CMR-10055
CMR-10066
CMR-11136
CMR-10040
CMR-13069
CMR-10713
CMR-10057
CMR-10591
CMR-12993
CMR-10031
CMR-10041
CMR-10032
CMR-16314
CMR-14984
CMR-11024
CMR-11648
CMR-10043
CMR-10345
CMR-10042
CMR-11176
CMR-12918
CMR-10093
CMR-11647
CMR-10064
CMR-12205
CMR-13633
CMR-12206
CMR-12432
CMR-12431
CMR-12548
CMR-13658
CMR-12952
CMR-10063
Nozzles
NOZZLES
DESCRIPTION
MANUFACTURER
AMADA
NOZZLE, 2mm, AMADA
NOZZLE, INNER, AMADA
NOZZLE, OUTER, AMADA
PART NO.
BMD-11872
BMD-11797
BMD-11798
BYSTRONICS
NOZZLE, BYSTRONICS, HK15
NOZZLE, BYSTRONICS, HK20
CINCINNATI
NOZZLE HOLDER W/SEAL, CINCINNATI
NOZZLE, NON-CONTACT, .060”, CINCINNATI
NOZZLE, NON-CONTACT, .080”, CINCINNATI
NOZZLE, STD, CINCINNATI, 1.5mm
NOZZLE, ELONGATED, CINCINNATI, 1.5mm
LASAG
NOZZLE, GRAPHITE, LASAG
NOZZLE, NYLON, LASAG
GSI LUMONICS
NOZZLE, MICRO LUMONICS
NOZZLE, LUMONICS, 1.0mm
NOZZLE, LUMONICS, 1.5mm
MAZAK
NOZZLE, ADAPTER TIP, 1.5mm, MAZAK
MITSUBISHI
NOZZLE, MITSUBISHI, W001, 1.5mm
NOZZLE, MITSUBISHI, W002, 2mm
NOZZLE, MITSUBISHI, W269, DOUBLE CAP
NOZZLE, MITSUBISHI, W270, DOUBLE CAP/8 IN.PORTS
NOZZLE, MITSUBISHI, W387, DOUBLE CAP/4 IN.PARTS
NOZZLE, MITSUBISHI, W390, DOUBLE CAP/4 IN. PARTS
SPOON, LARGE, MITSUBISHI, W165
SPOON, SMALL, MITSUBISHI, W004
NUT, JAM, MITSUBISHI 263
BMD-12504
BMD-12503
BMD-12489
BMD-13166
BMD-13587
BMD-12491
BMD-12490
BMD-12858
BMD-12857
BMD-12253
BMD-12495
BMD-12494
BMD-12917
BMD-12057
BMD-11785
BMD-13408
BMD-12549
BMD-11929
BMD-11930
BMD-14772
BMD-11937
BMD-11938
BMD-11932
BMD-11931
BMD-14773
BMD-12484
BMD-12469
BMD-14776
DESCRIPTION
MANUFACTURER
PRECITEC
NOZZLE, 1.5mm, PRECITEC
PART NO.
BMD-13972
RAYTHEON
NOZZLE, COPPER, RAYTHEON
NOZZLE, CUTTING, RAYTHEON
NOZZLE, WELDING, RAY SS550, .250” DIA
ROFIN
NOZZLE, ROFIN, 1.0mm
NOZZLE, ROFIN, 1.5mm
STRIPPIT
NOZZLE, .046, STRIPPIT
NOZZLE, .080 HP, STRIPPIT
UNITEK MIYACHI
NOZZLE, LASER, GAS, UNITEK MIYACHI, LW250
TRUMPF/HAAS
NOZZLE, HOLDER, CERAMIC
NOZZLE, 1.4HP, CYLINDRICAL, TRUMPH #237497
WEIDMULLER
NUT, CONE, WEIDMULLER
TIP, CONE, WEIDMULLER
MISCELLANEOUS
NOZZLE, SPECIAL, CHROMALLOY HOLLAND
NOZZLE, 5.8”FOCUS, SPECIAL
NOZZLE, 6”FOCUS, SPECIAL
BMD-14201
BMD-12368
BMD-16295
BMD-12495
BMD-12494
BMD-14781
BMD-14782
BMD-14814
BMD-12922
BMD-14400
BMD-12019
BMD-12020
BMD-14783
BMD-11312
BMD-11311
1 800 468 2326
408 321 8500
FAX: 408 321 8466
105
Lamps
LAMPS
Gas discharge lamps
Gas discharge lamps are routinely used as optical pump sources for solid state lasers.
The two main categories of laser pump lamps are DC arclamps for continuous
pumping, and flashlamps for pulsed pumping. Both offer high brightness, high
power capability, long operating life, and low cost per hour of operation.
How They Work
An electric current is discharged through a gas-filled quartz tube, generating a hot plasma. This
plasma radiates intense light which can be coupled into a laser crystal, optically exciting the laser
medium. For Nd:YAG lasers, lamps filled with the noble gases Xenon and Krypton are frequently
selected as they are most efficient at radiating wavelengths of light which are in the excitation
spectrum of the Nd atoms and are readily absorbed by the Nd:YAG crystal.
Flashlamps are operated in a pulsed mode; they discharge high current pulses (hundreds of amps)
ranging in duration from .1 to 20.0 milliseconds. They are filled with either Krypton or Xenon:
Krypton is more efficient at low currents and Xenon at high currents. Fill pressures are usually
less than one atmosphere to help prevent explosions during the highly energetic current pulses.
Typical output spectrum for krypton arclamp
Relative Fluorescence Conversion Efficiency
Absorption spectrum of Nd:YAG
Wavelength (nm)
Wavelength (nm)
At low power densities,
Krypton filled lamps generate
a spectral output that is
efficiently matched to the
Nd:YAG absorption spectrum.
At higher power densities,
Xenon becomes the more
efficient fill gas.
Traditionally, a Pulse Forming Network (PFN) of capacitors and inductors is used to generate the
high current discharge. The PFN circuit is designed to match impedance with the flashlamp. The
capacitors, (or capacitor bank) in series with the inductor(s) are charged and held across the map
terminals. The impedance of the lamp prevents discharge until the lamp is ionized by the
trigger pulse. The capacitor then discharges through the inductor and the lamp, generating a pulse
of current and a burst of light. The capacitors can be charged and discharged repeatedly at high
repetition rates to generate a steady stream of laser pulses.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
106
For improved reliability, stability and lamp lifetimes, a “simmer” process is employed. After the
lamp is triggered, and between the subsequent current pulses, a steady DC current (typically
.1-2.0 amps) is established and maintained by a separate power supply. The PFN is held off from
discharging by SCR’s. A rate generator trips the SCR’s at the desired rate allowing the PFN to
discharge through the lamp. Simmering eliminates the need to trigger the lamp for each pulse. This
greatly improves pulse-to-pulse reliability and stability and also extends the life of the flashlamp.
Lamps
LAMPS
In recent years, solid state switching power supplies have begun replacing capacitor/inductor
PFN’s in flashlamp pumped Nd:YAG lasers. Instead of charging and discharging a PFN, modern
switching power supplies directly generate the current pulse. While PFN’s generate pulses which
are shaped like half sine waves, switching power supplies can generate current pulses in a number
of useful shapes: square waves, stepped, etc. The ability to shape the current pulse, and thus the
laser pulse, has led to great improvements in Nd:YAG laser material processing.
CW arclamps
Flashlamps
DC Arclamps are operated in a continuous wave (CW) mode and discharge a constant current in
the 10-40 Amp range between 100-250 Volts. The continuous light radiated induces constant gain
in the Nd:YAG rod, generating a continuous laser beam. Krypton gas is almost always selected for
CW applications because it is more efficient than Xenon at these power levels; in fact, these lamps
are universally known as Krypton arclamps. For increased efficiency, they are filled to very high
pressures, typically 5-10 atmospheres. Violent explosions can result from mishandling, so safety
glasses should be worn during handling and installation.
These high pressures make Krypton arclamps difficult to start because of their high impedance.
Therefore, fairly complex starting circuitry must be employed: first, a short duration (approximately
one microsecond) high voltage (20-30kv) trigger pulse is applied to the lamp, which causes an
initial ionization of the gas. Next, a boost circuit drives a low current through the lamp at
moderate voltage for a few milliseconds after which the main power supply can take over and
run the lamp at its normal operating current and voltage (typically 20 amps at 150 Volts).
1 800 468 2326
408 321 8500
FAX: 408 321 8466
107
Lamps
LAMPS
Manufacturing Highlights
Chemically impregnated cathode tips
Tubing, Electrodes, Quartz to Metal
Sealing, Gas Filling, Connectors, Testing
Extremely tight quality control and anticontamination procedures must be adhered to in
the laser lamp manufacturing process.
Tubing
Lamp envelopes are made from high quality
quartz tubing. Naturally fused silica quartz is
most commonly used, however, some solid
state laser materials are excited by deep
ultraviolet radiation, filtered by natural
quartz. For these lasers, synthetic quartz tubing,
which transmits deeper into the UV, is used.
Nd:YAG lasers, on the other hand, are made
from quartz tubing doped with cerium or
titanium, which filter more UV than natural
quartz.
Arclamps usually employ thinner walled tubing
(typically 0.5mm) for better heat transfer to the
cooling fluid. Sometimes different sized tubes
are fused together to create a lamp envelope
with enhanced performance characteristics.
Electrodes
Anodes, the positive electrodes, are made from
easily machinable thoriated tungsten which has
an excellent ability to handle the thermal load
created by receiving electrons from the
current discharge.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
108
Cathodes, the negative electrodes, are sometimes made from thoriated tungsten, however,
for the cathode’s strenuous task of emitting
electrons into the gas discharge, improved
designs have been developed. For example,
most laser lamp cathodes now incorporate
chemically impregnated tips which reduce the
work function at the cathode surface and
subsequently reduce cathode “sputtering,”
the major cause of lamp aging and failure.
This chemical mixture generally contains
barium, calcium and alumina; each lamp
manufacturer has their own proprietary
chemical recipe. These chemically impregnated
cathodes require more difficult, higher
temperature processing, but their higher cost
is offset by longer lamp lifetimes.
Since anodes are designed to receive electrons
efficiently and cathodes are designed to emit
the same, it is very important to install lamps
in the proper polarity direction. Installing a
lamp backwards will lead to premature lamp
failure due to electrode degradation. The anode
end of a lamp is marked with a red color
code or a “+” sign and should be attached to the
positive connection. The cathode is usually
unmarked and should be attached to the
negative terminal.
Quartz to Metal Sealing
Quartz and tungsten have very different coefficients of thermal expansion, and cannot be
directly fused because the difference would
lead to strain and cracking failure. Intermediate joining materials are required to
overcome this dilemma. Early lamp designs
incorporated a soft solder quartz-to-metal joint
which has the advantage of being thermally
and mechanically rugged in operation. The
process is fairly easily automated for repeatability,
however, the solders used cannot tolerate the
high temperature processing used to manufacture
Lamps
LAMPS
Glassblower constructing a graded seal
Lamps at a gas filling station
modern chemically impregnated cathodes. To
overcome this limitation, “graded glass” seal
technology was developed: a glass with a
coefficient of thermal expansion in between
that of quartz and tungsten is used to join the
two dissimilar materials. The glass has a very
high melting point so it can tolerate high
temperature cathode processing easily but it is
more fragile than traditional solder seal and
cannot tolerate much mechanical strain. Furthermore, this type of seal does not easily lend
itself to automation: skilled glassblowers
individually hand craft graded glass seal lamps.
Krypton. The electrical characteristics of each
lamp are then checked to ensure that the lamps
have been properly processed. After passing
electrical inspection, the lamps are ready to
have end connectors attached.
Gas Filling
After the electrodes have been inspected and
sealed into the quartz envelope, the lamps are
processed in batches on multiport vacuum/gasfilling stations. The lamps are pumped down to
a very high vacuum and processed at high
temperatures using hydrogen torches and RF
induction coils, driving any contaminant gases
out of the lamp. They are then filled to the
specified fill pressure with either Xenon or
Connectors
Lamps can be terminated with many different
styles of connectors, depending on the laser
system designer’s preference. The critical
consideration is making sure the lamp can be
installed in the laser head easily and without
straining the glass-to-metal seals. Many
different schemes have been developed to
achieve this, including solid metal cylindrical
lugs which can clip into spring fittings in the
laser head. Flexible leadwires are another
popular design. Some lamps have connectors
with built-in O-Ring grooves and others use a
combination of flexible leadwires and solid
terminal lugs for good strain relief and
positive electrical connection.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
109
LAMP
CONNECTION
HARDWARE
Lamp connection hardware
Nd:YAG laser designers have devised many ways to deliver electrical power to
flashlamps and DC arclamps. Various lamp connection hardware arrangements
have been devised to efficiently deliver high power (typically 3-8kw) with a minimum
of resistance.
The simplest lamp connection designs consist of a gold plated fuse clip (providing low surface
connection resistivity) attached to a terminal block with machine screws. The whole assembly is
immersed in deionized water in the laser head. Since the connection is entirely submerged, the thin
cross section clip does not encounter thermal problems.
If the connector is not completely submerged, a more complex design is required. Various
combinations of sockets, insulators, and spacers may be employed: some have built-in cooling
water channels, and some require elaborate manufacturing techniques for joining metallic
conductors to nonmetallic insulators.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
110
Flow Tubes
FLOW TUBES
Flow Tubes
Flow tubes and flow plates are used in water-cooled Nd:YAG lasers to channel cool
water at high-velocity across the surface of the lamp and rod. Velocity is the key
consideration for transporting heat away from the lamp and rod.
Materials
Pyrex is the most popular flow tube material because it is inexpensive, transmits well in the
Nd:YAG pump bands and effectively filters ultraviolet light.
Cerium Doped Quartz is the next most common flow tube material. Quartz is more mechanically rugged than Pyrex, and is more resistant to thermal cracking. The Cerium dopant filters UV
almost as well as Pyrex and has the added advantage of fluorescing in the Nd:YAG absorption
bands. Cerium Doped Quartz flow tubes yield better YAG efficiencies and last longer than Pyrex,
but they are more expensive.
Samarium Doped Glass is an even more effective optical filter and fluorescent material.
However, its high cost limits its application mainly to military and scientific applications.
Without a flow tube, “eddies” or areas of slow water
flow could develop in the laser cavity, resulting in
hot spots, irregular rod temperature, or boiling. The
laser designer intentionally specifies a narrow gap
between the flow tube and the lamp or rod. In this
way, even a small volume of water under high pressure
will travel across the lamp and rod surfaces at high
velocity, eliminating the need for higher capacity
pumps and reservoirs. It is important to replace
chipped or cracked flow tubes, even if no water leaks
are apparent, as they can change the flow path and
slow the flow rate across the lamp or rod.
Flow tubes and flow plates also serve as optical filters for unwanted wavelengths of light. While
Xenon and Krypton lamps are excellent sources of the wavelengths which excite Nd:YAG, they
also emit a great deal of visible and ultraviolet light which can be detrimental to the lasing process.
For example, wavelengths which are not in the Nd:YAG pump bands may add heat to the rod,
reducing its efficiency. Ultraviolet light can cause permanent solarization, changing the color of
the rod and reducing its efficiency. The ideal flow tube material would only transmit wavelengths
in the rod pump band; actual flow tube materials are a compromise between this goal and cost.
A word about flow tube coatings…
Narrow bandpass coatings could be used to achieve the ideal flow tube which only transmits
useful wavelengths. However, thus far, the coating process is too expensive to be practical for
commercial laser flow tubes.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
111
Cavities
CAVITIES
Gold-plated laser cavities
In most industrial Nd:YAG laser systems, the Nd:YAG crystal is housed in an assembly
called a head. Usually consisting of a hollowed out block and removable lid, the head
also houses the flashlamp or arclamp and some sort of reflective cavity (gold or ceramic)
which directs the lamp light into the crystal.
How They Work
Reflective cavities consist of a central cylinder, an elliptical cross section, and endplates which
close the ends of the cylinder. The central cylinder can, in some cases, be separated into two halves
like a clam shell. The rod and lamp are placed at the focal points of the ellipse to maximize the
amount of lamp light directed into the rod.
A common cavity design, called “close coupled, ” simply positions the lamp as close as possible
to the rod. In this arrangement, radiation directed from the lamp to the rod contributes more than
just reflected radiation to the optical pumping of the rod.
Other Highlights
Most laser cavities are machined from metal. The surfaces are polished to a very smooth finish
and plated with gold which is very reflective and resists corrosion. Repeated cleaning of
contaminant deposits, however, results in scratches which reduce reflective efficiency.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
112
When the reflective efficiency of a gold cavity has been reduced by corrosion and contaminant
deposits, the cavity can often be salvaged and reworked. Corrosion and contaminants are
chemically stripped, the reflective surface is repolished to original figure and quality, and a new
gold plating is applied. This is economical for relatively large, expensive cavities. However,
reworking is generally not cost effective for smaller cavities, which are usually manufactured in
large batches, thus the set-up charges for reworking a small cavity will typically outweigh the
material cost savings. Newer model Nd:YAG lasers are now incorporating cavities which have been
machined from recently developed diffusely reflective, ceramic materials. These materials do not
require gold plating and are more scratch resistant.
Cavities
CAVITIES
Cavity Assemblies
Cross section of an elliptical cavity
ELLIPTICAL REFLECTIVE SURFACE
LAMP
LAMP LIGHTRAYS
ROD
See headblock drawings at front of catalog.
A great deal of research and development has gone into improving gold plating performance for
laser cavity applications. Reflectivities above 98% are now routinely achieved. An underplating of
nickel is often applied for improved corrosion resistance. Extra care is required to ensure this
undercoating is pore-free, particle-free, and exceptionally uniform. The hardness and durability of
the gold coating is increased by reducing the grain size through a unique grain refining process.
This process does not require alloying; the gold is highly pure (99.9%) and, therefore,
very corrosion resistant.
These process improvements have resulted in new and reworked cavities with reflectivity and
longevity that in many cases exceeds the original design specifications.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
113
Head Blocks
HEAD BLOCKS
Head blocks
L aser head blocks, which house the reflective cavity, rod, and lamp are typically
machined from non-corroding metals or plastics. Metals are more durable than
plastics but have the drawback of being electrically conductive. Extra care must
be taken with the design of lamp connector insulation to accommodate metal
head assemblies. Plastic heads are electrically insular but are more susceptible to
degradation caused by long term exposure to ultraviolet lamp radiation.
Head block manufacturing requires fairly complex machining of various openings,
grooves, slots, cooling channels, etc., which are necessary to accurately capture the
cavity, lamp, rod, and flow tube assemblies for ease of installation and alignment, and
maximum cooling water flow. The various openings are sealed with gaskets and O-Rings
which are available in kits.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
114
Nd:YAG Rods
Nd:YAG RODS
Nd:YAG Rods
Neodymium doped Yttrium Aluminum Garnet (Nd:YAG) is the most commonly
employed solid state lasing medium for material processing applications. Nd:YAG has
relatively good optical absorption and conversion efficiency, low lasing threshold and
good thermal dissipation for high power operation.
Unmounted Rods
Nd:YAG laser optically pumped by Xenon or Krypton lamp
REAR MIRROR
(HIGH REFLECTOR)
REFLECTIVE CAVITY
FRONT MIRROR
(PARTIAL REFLECTOR)
Nd:YAG ROD
LAMP LIGHT
OUTPUT
LASER
OUTPUT
LAMP
1 800 468 2326
408 321 8500
FAX: 408 321 8466
115
Nd:YAG Rods
Nd:YAG RODS
Four level optical pumping
Electrons in any given atom can occupy
various discrete energy levels associated with
discrete orbits or “shells” around the atomic
nucleus. Electrons in higher orbits possess
greater energy values than electrons in lower
orbits. Without the addition of outside energy,
electrons will tend to settle to the lowest
orbits and energy levels available. However,
if energy is added to an electron, it can be
boosted to a higher level, leaving a vacancy in
the lower level.
If enough electrons are boosted into higher
energy levels, a condition known as “population inversion” can be created. A population
inversion exists when a high energy level is
more populated than a level below it (see figure
above). This condition is a prerequisite for
lasing to occur. In fact, the minimum population
inversion required to initiate lasing is called the
“laser threshold.” Lasing occurs when electrons
fall from a high energy level to a less populated
level below, releasing their stored energy in the
form of photons of coherent, monochromatic,
laser radiation.
Neodymium (Nd) is the active laser medium
in an Nd:YAG laser system. It is an excellent
laser medium because it responds well to
optical pumping and reaches laser threshold
relatively easily. Its threshold is low because it
achieves population inversion via a 4-level
pumping scheme (see illustration below).
1 800 468 2326
408 321 8500
FAX: 408 321 8466
116
If light from a Xenon or Krypton lamp is
reflected into the Nd:YAG rod, some of it will
be of the proper energy and wavelength to be
absorbed by the Nd atoms, exciting some
electrons from the ground state (EO) to the
highest energy level (E3). This is called optical
pumping.
Four level optical pumping has two important
benefits: easily maintained population inversion
and good pump transition absorption. For a
pump transition to remain highly absorptive,
the ground state must be highly populated
relative to the upper state of the transition. In
4-level pumping, the rapid (short lifetime)
decay from E3 to E2 builds the E2 population
quickly for good inversion, and keeps the E3
level relatively empty and ready to accept more
electrons. This keeps the E 0 to E 3 pump
transition very absorptive, hence very efficient.
Secondly, the rapid decay from E1 to E0 keeps
the E 1 level at low population for good
inversion and rapidly replenishes the E0 ground
state for highly absorptive pumping.
For efficient optical coupling, the rod and
pump-lamp are usually positioned close to
each other inside a reflective housing. For low
power applications, such as marking or resistor
trimming, the rod can be continuously pumped
by an arclamp; for higher power applications,
such as drilling or welding, the rod is usually
pumped by repetitive pulses from a flashlamp.
However, some continuously pumped high
power systems have recently been developed.
Nd:YAG Rods
Nd:YAG RODS
Mounted rods
Manufacturing Highlights
Crystal Growing, Rod Fabrication, Other
Host Materials, Lasing Media
Crystal Growing
Nd:YAG rods are cut from larger crystals called
“boules” which are produced in a furnace by the
Czochralski growth method. As the crystal
grows, it is pulled from a molten solution.
The temperature of the melt, which is near
2000°C, must be precisely controlled for the
entire 2 to 3 week duration of the process.
Neodymium ions are substituted for a
percentage of the Yttrium ions in the Yttrium
Aluminum Garnet host crystal. The desired Nd
percentage is typically around 1.0%. However,
since the Neodymium ion is larger than the
Yttrium ion, it only reluctantly fits into the
Yttrium site in the crystal lattice. To force the
substitution, the original melt must be
approximately 5 times richer in Nd ions than
the desired final rod dopant level. This forced
substitution has a negative side effect. As the
1.0% doped boule is pulled from the 5.0%
melt, the Nd concentration of the melt
increases, similar to the way evaporation
increases the concentration of a brine solution.
The Nd substitution percentage increases as the
melt concentration increases, yielding a boule
with an axial or lengthwise dopant gradient.
This limits the length to which uniform boules
can be grown. In practice, this gradient is
minimized by keeping the size of the boule
small with respect to the mass of the melt. In
this way, growth of the boule does not have as
great an effect on the melt concentration.
Varying the Nd dopant percentage will greatly
affect laser output power and mode quality.
Generally, lower dopant percentage will yield
lower multimode output power, but improved
fundamental mode (TEM00) quality. Low
doped rods are preferred for applications such
as thin film resistor trimming, when mode
quality and small focused spot size are more
important than maximum output power.
Higher dopant percentage will yield higher
multimode output power but poorer TEM00
mode quality. High doped rods are preferred
for applications such as marking or engraving
when maximum multimode output power is
important, and the beam is not apertured.
Rod Fabrication
Since the Neodymium ion is larger than the
Yttrium ion, strain is induced in the crystalline
lattice when Neodymium occupies an Yttrium
site. This limits the dopant level which can be
achieved while maintaining good optical
quality. To ensure that Directed Light’s
Nd:YAG rods are of the highest quality, a
Twyman-Green interferometer photo of the
boule is used as a cutting guide to select the
best areas. Areas of excess strain are not used.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
117
Nd:YAG Rods
Nd:YAG RODS
Tightening rod mounts to specified torque in rod alignment fixture
In operation, rods are usually mounted into
a water flow tube arrangement for efficient
cooling. Most rods can be purchased
either mounted or unmounted for ease of
handling and installation.
Other Host Materials
In addition to inherent strain caused by the
growing process, strain can be induced in the
cutting and grinding process. Directed Light
rods go through a unique strain relief process
to eliminate these fabrication induced strains.
The rod shaft surface has a ground finish for
uniform, diffuse, optical pumping. The rod
ends are ground to an extremely precise shape
(l/10 or better), flat or radiused, parallel or
wedged, and polished to a very high quality
surface finish (10-5 or better).
High damage threshold coatings are applied to
the polished rod ends. In most cases,
antireflective coatings are used to increase
transmission efficiency. In some cases, highly
reflective or partially reflective coatings are used
to eliminate the need for a front or rear mirror.
Although these coatings have very high
damage thresholds, contamination by debris or
moisture can cause coating deterioration. If
this happens, the rod can usually be salvaged
by repolishing and recoating at a fraction of the
cost of a new rod.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
118
In addition to YAG, Neodymium can be
doped into glass. Glass has a few advantages
over YAG: it is non-crystalline which
makes it less expensive and crystalline strain
issues do not apply so higher dopant levels can
be achieved. Therefore, Nd: Glass rods can very
efficiently produce high energy pulses. The
main disadvantage to glass is its comparatively
low heat dissipation capabilities. So, while
Nd:Glass rods can produce high energy
pulses, repetition rates must be kept low to keep
the average power level down. This limits Nd:
Glass to low frequency applications such as
spot welding or drilling.
Other Solid State Lasing Media
For some applications, the output wavelength
of Nd:YAG may not be optimum. Many other
solid state lasing media have been studied and
employed in scientific, military, medical, and
communications applications. Erbium,
Holmium, Chromium doped Sapphire (Ruby),
Titanium doped Sapphire, and Alexandrite are
just a few of the many available lasing
m e d i a . However, for industrial materials
processing, Nd:YAG and Nd:Glass are still the
most practical and economical, optically
pumped, solid state lasing media.
Nd:YAG Lens Protectors
Nd:YAG LENS
PROTECTORS
Lens Protectors
The use of inexpensive lens protectors to shield the lens from splatter and debris is
recommended for most Nd:YAG applications. These lens protectors are usually made from
inexpensive quartz or pyrex, and are available with or without antireflective coatings.
The most common sizes are available from stock. Call your Directed Light representative for
information on nonstandard diameters and thicknesses.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
119
Nd:YAG Lenses
Nd:YAG
LENSES
Lenses
Lenses are used in Nd:YAG laser systems to focus all the beam’s power into a very small spot
which generates the high power densities required to cut, weld or drill many high alloy materials.
Also, small focused spot size is important when narrow kerfs and heat affected zones are
required, or when drilling extremely small diameter holes.
The design variables that will affect the performance of an Nd:YAG laser lens are focal length,
diameter, shape, material and coating.
Nd:YAG Laser Lenses
Focal length affects both spot size and depth of focus. In general, a shorter focal length will produce
a smaller focused spot and a shorter depth of focus. Usually, the specified focal length is a
compromise between desired spot size, penetration depth, and workpiece clearance.
Lens diameter is important for two reasons. Higher power lasers require larger diameter
lenses to prevent thermal overload. Also, at any given focal length, a larger diameter lens will yield
a smaller focused spot, if the incoming beam is expanded to fill the larger lens.
Lens Shapes
Bi-convex lenses, as their name implies, have a convex curve on both the incoming and outgoing
surfaces. The curves are generally unequal and are designed to yield the optimum focused spot.
This optimized design, sometimes referred to as “best form, ” will yield a smaller focused spot
than a plano-convex lens. Directed Light recommends bi-convex lenses for most Nd:YAG
applications. However, we can supply plano-convex lenses for less critical, cost-sensitive
applications. An unequal, bi-convex lens should be oriented with the larger radiused (flatter) side
toward the workpiece.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
120
Plano-convex is the simplest and least expensive lens shape. It is only recommended for
applications where achieving the smallest spot size is not critical or at relatively long focal lengths
when the benefits of a bi-convex lens are reduced. A plano-convex lens should be oriented with
the flat side toward the workpiece.
Nd:YAG Lenses
Nd:YAG
LENSES
Achromatic doublet lenses
Achromats are complex focusing optics
consisting of 2 or more lenses. They are
corrected for spherical aberrations and
are diffraction limited. For critical
applications, they generate the smallest
possible focused spot size, even better than
bi-convex lenses. Achromats are used in
many of the newer, fiberoptic delivered,
pulsed Nd:YAG laser systems.
The individual lenses in an achromatic
optic assembly can be separated from each
other in a mount. This is called an
“ a i r- s p a c e d ” a c h r o m a t . H ow eve r,
improvements in optically transmissive
cements have made cemented achromats
practical for many laser applications.
Cemented achromats can be supplied
without a mount.
Lens Materials
Fused silica is the material of choice for most Nd:YAG laser lenses. It has very good optical
characteristics – low absorption and high transmission – at the 1.06 micron Nd:YAG wavelength
as well as in the visible spectrum. This allows highly efficient transmission of the laser beam and
good image quality for camera monitoring systems. It also has excellent thermal conductivity
which helps prevent thermal overload. All of Directed Light’s most commonly used Nd:YAG
lenses are manufactured from extremely high grade fused silica. It is recommended for all Nd:YAG
applications. For low power or noncritical applications, less expensive materials, such as BK7
glass or pyrex, can be used.
Coatings
All Directed Light’s standard Nd:YAG lenses have highly efficient antireflective coatings on both
surfaces. This reduces surface losses to nearly zero for the best beam transmission possible. These
coatings have extremely high damage thresholds and are quite durable. However, care should be
taken when cleaning and handling.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
121
Nd:YAG Mirrors
Nd:YAG
MIRRORS
Nd:YAG Mirrors
In any Nd:YAG laser system, mirrors are among the most critical components. The design and
manufacturing quality of the laser’s mirrors are crucial to generating, maintaining and
delivering a high quality laser beam.
There are two main categories of laser mirrors: internal and external. Internal mirrors, also
known as “resonator” or “cavity” mirrors, are used to generate, maintain and amplify the laser
beam by forming a reflective “resonator” around the Nd:YAG crystal. External mirrors are
used to deliver the laser beam.
Most mirrors have flat reflective surfaces, but some have curved surfaces designed to reduce
beam divergence. The design of the substrate material and coating of an Nd:YAG laser mirror
is primarily determined by its intended function.
How They Work: Internal Mirrors
Output couplers, also known as front mirrors,
are designed to reflect a portion of the beam
back into the laser resonator for continuous
amplification while transmitting another part of
the beam to the outside for use. Therefore, the
substrate material must be transmissive at the
required wavelength of 1.06µ. Pyrex and BK7
glass can be used for low power systems, however, Directed Light specifies only high quality
fused silica for Nd:YAG front mirrors. Fused
silica has better optical and thermal properties
than glass and yields better durability and lifetime.
The outside surface of a front mirror usually
has an anti-reflective coating for improved transmission efficiency. The inside surface has a
partially reflective coating to reflect a specified percentage of the beam back into the resonator.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
122
Rear mirrors are designed to reflect all or nearly all of a laser beam back through the laser
crystal for amplification. The inside surface is given a highly reflective (99% to nearly 100%)
coating. In the nearly 100% reflective case, the outside surface does not need to be polished or
coated. Some rear mirrors, however, are designed to transmit a small percentage (0.5%-1.0%)
of the beam to a power detector for real time power monitoring. These mirrors must have a
transmissive substrate, and the outside surface is usually polished and anti-reflective coated.
Fused silica or less expensive BK7 glass substrates can be used in either case, since the thermal
load of 1.0% transmission is very small.
Nd:YAG Mirrors
Nd:YAG
MIRRORS
Dichroics
External Mirrors
Bending mirrors are used to direct the laser
beam towards the work piece. A 90º bend (45º
angle of incidence) is most common, but other
angles can be used. With careful coating
design, reflectivities approaching 100% at the
desired wavelength are common.
Because the dielectric coatings on the front
surface reflect nearly 100% of the laser beam,
the thermal properties of the substrate material
are not critical. Some beam delivery systems,
however, are designed to allow a camera to
view the workpiece through the backside of
the bending mirror. In this case, the substrate
must be transmissive in the visible spectrum and
typically a broad band anti-reflective (BBAR)
coating is applied to the backside for
improved visible transmission and camera
imaging. Fused silica and BK7 are the most
commonly used substrate materials.
Dichroic mirrors, as their name implies, are
designed to reflect two colors, or wavelengths
of light. Many Nd:YAG laser systems
incorporate a HeNe laser for aligning the beam
and locating the focused spot. These systems
must use dichroic bending mirrors which
reflect both the Nd:YAG wavelength (1.06µ)
and the red HeNe wavelength (0.632µ). Due to
design constraints, reflectivity can only be
maximized at one wavelength. Therefore,
Nd:YAG dichroic mirrors are usually designed for
maximum reflectivity (nearly 100%) at the Nd:YAG
wavelength and best effort high reflectivity
(usually 80%-90%) at the HeNe wavelength.
The coatings on Directed Light’s bending and
dichroic mirrors are multilayer dielectrics
which are highly efficient and durable. They
have damage thresholds of 5 Gigawatts per
square centimeter.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
123
Q-Switches
Q-SWITCHES
Q-Switches
Acousto-Optic Q-switches are used to generate short duration, high-peak power pulses from
continuous wave (CW) Nd:YAG lasers. A Q-switched laser can perform many applications
which would be impossible for a CW laser system. For instance, in resistor trimming, a thin
layer of resistive materials must be vaporized without damaging the underlying substrate. The
short, intense pulses from a Q-switched laser can easily achieve this, whereas with a continuous
beam, the power required to vaporize the resistive film would also cause heat damage to the
substrate.
Theory of Operation
Every optically transmissive material has an index of refraction which determines the angle at
which a light beam will bend when it travels into and out of it. Sound waves can exert enough
pressure to slightly compress the material and temporarily change its index of refraction. Thus,
when a light beam travels through material at the same time as a sound wave, it will be deflected
from the path it would take if no sound waves were present. Q-switches exploit this acousto-optic
phenomenon to switch a laser beam on and off.
RF power (sound waves in the radio frequencies-megahertz) is pumped into the Q-switch crystal,
deflecting the beam away from one of the cavity mirrors, changing the “Q” or quality factor of
the laser cavity enough to extinguish the lasing action. Rapidly switching the RF sound waves
on and off switches the laser beam on and off. In this way, the laser can be made to emit short
duration (nanosecond range) laser pulses at high repetition rates (Kilohertz range).
1 800 468 2326
408 321 8500
FAX: 408 321 8466
124
The analogy of a pinched water hose is useful for better understanding this process: when a
water hose is pinched, high back pressure develops (increasing gain). Releasing the pinch results
in a high velocity surge of water (high power pulse). The longer the pinch is held, the higher the
back pressure and velocity of the water surge will be (slower rep rates = higher gain and higher
power pulses).
Q-Switches
Q-SWITCHES
68 MHz Q-Switch
The pulses have high peak power because, while the system is not lasing, the rod is being pumped
to a higher level of gain by the arclamp. When the RF power is removed from the Q-switch
crystal, the beam is no longer deflected, (the cavity “Q” is restored) and a high peak pulse is
emitted. The peak power is affected (and can be controlled) by the repetition rate. Slower pulse
rates yield higher power pulses because the rod has a longer time between pulses to build gain.
The high peak-power and short duration of these pulses are what make them useful for
material processing. The high peak-power is sufficient to vaporize small quantities of material from
a surface for resistor trimming, marking, etc. The short pulse duration minimizes the amount of
heat input to the workpiece, reducing thermal damage to the bulk material or substrate.
Acousto-Optic Material, Antireflective Coatings,
Acoustic Transducers, Bonding Process
Materials and Coatings
A good acousto-optic material will have a high index of refraction and photoelastic constant to
achieve good deflection of the beam. High optical transmission and low absorption of sound waves
are also critical. Rapid response time is crucial for high speed switching. Many materials such as
fused silica, lead molybdate and dense flint glass can be used. Directed Light’s Q-Switches are
manufactured with crystalline quartz, which, while more expensive, best satisfies all of these
requirements. The quartz crystal is polished to an extremely precise finish – 10-5 Scratch-Dig and
l/8 flatness – and coated with an antireflective coating. This limits reflection loss to less than 0.2%
per surface. The excellent quality of the quartz crystal limits overall insertion loss to less than
10%. The antireflective coatings have a damage threshold of 100Megawatts/cm2.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
125
Q-Switches
Q-SWITCHES
When the acoustic signal is switched on, sound waves traveling through the acousto-optic crystal create a train of
compressions that act as a diffraction grating. This deflects the laser beam away from one of the mirrors, extinguishing
lasing and allowing gain to build in the laser rod.
Transducers
The acoustic transducer is also crucial to the proper performance of the Q-switch. The transducer
is a piezoelectric device: it expands and contracts when voltage is applied to it. Thus, when RF
power is applied to the transducer, it expands and contracts at RF frequencies (many megahertz)
and this, in turn, sends sounds waves into the quartz crystal. Directed Light’s Q-switches are made
with high quality lithium niobate transducers. For connection to the RF power source, a film of
gold is vacuum evaporated onto the thin plate of lithium niobate. The gold makes a durable,
non-corroding, non-tarnishing connector.
Bonding
1 800 468 2326
408 321 8500
FAX: 408 321 8466
126
One of the most critical aspects of Q-switch design and manufacture is the bond between the
transducer and the acousto-optic crystal. In order to reduce costs, some Q-switch manufacturers
use organic glues or epoxies to attach the transducer to the crystal. In our Q-switches, the
transducer is joined to the crystal by a metal bonding process. Thin metallic films are evaporation
deposited on the quartz crystal and lithium niobate transducer. The two pieces are then
“cold-welded” together under vacuum and high pressure. This type of joining process has two
significant advantages over epoxies: the metal bond joint is more efficient at transmitting sound
waves, meaning more RF power goes into the crystal for better laser beam holdoff, and less waste
heat is generated, and the metal bond is much more resistant to thermal cycling, making our
Q-switches the most durable available.
Deionization Filters
DEIONIZATION
FILTERS
Deionization filters and resin
Deionization filters are used to prevent electrical arcing on the “laser” side of the heat exchange
system. Many water cooled laser components, flashlamps for example, have high voltage
exposed to the cooling water. For this reason, electrically conductive “city” water cannot be used
on the laser side of the cooling loop.
City or tap water is full of positive ions such as calcium (Ca2+) and negative ions such as
chloride (Cl-). These ions allow the water to conduct electricity. Large numbers of ions make
water highly conductive; few ions make water resistive. Obviously, water must be made resistive
in order to cool high voltage components without causing arcing. Therefore ions must be removed
using deionization filters.
Deionization filters contain resins of small spherical beads. These beads have ion exchange sites
throughout their polymer structure which capture ions from water. Typically, two types of resins
are used: cation resin for removing positive ions and anion resin for removing negative ions. Some
filters have separate reservoirs or “beds” for the two resins, while some filters have mixed beds.
The maximum resistivity level which water can reach is 18.3 Megohm/cm. Most lasers require
cooling water resistivity of at least 1 or 2 Megohm/cm for trouble free operation. Below that
level of resistivity, problems such as arclamp trigger failure will occur.
Deionization filters should be changed on a regular preventative maintenance schedule at least
every 6 months. Many laser systems have in-line sensors to monitor water resistivity.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
127
Particle Filters
PARTICLE
FILTERS
Particle Filters
Particle filters are used to prevent the build up of deposits on gold cavities, flashlamps, flow
tubes, the cooling loop, and all associated plumbing.
Particle filters have a nominal pore size, usually in the .2 – 10 micron range. Most laser systems
use depth filters which are relatively inexpensive and filter throughout their bulky cross section.
These entrap most but not all particles above the rated pore size. Some systems use the more
expensive screen type, absolute filters. Screen filters entrap particles on the surface of the filter
and remove all particles at or above the rated pore size.
Particle filters should be changed on a regular maintenance schedule at least once every 6 months,
or sooner if an increase in pressure drop across the filter indicates clogging.
The processes involved in generating and developing a laser beam create a great deal of waste heat.
This heat must be rapidly carried away to maintain laser efficiency and prevent damage to critical
components such as lamps, rods and gold cavities in Nd:YAG lasers, and mirrors in CO2 lenses.
Many CO2 lasers use oil to cool plasma tubes and other components, however, in most high
powered industrial lasers, water is used as the cooling agent. Usually some sort of water-to-water
heat exchanger is employed.
The water on the laser side of the heat exchanger must be filtered to prevent contamination
buildup and electrical arcing. Two types of filters are used: particle filters and deionization filters.
Other system cooling components include pumps and pump components such as impellers and
volutes, heat exchangers, valves and fitting and various seals, seats and O-Rings.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
128
Cooling Components
COOLING
COMPONENTS
Other Cooling Components
In addition to deionization and particle filters, Directed Light carries a wide range of other
cooling system components. These include pumps and pump components such as impellers and
volutes, heat exchangers, valves and fittings, and various seals and seats.
Miscellaneous cooling system components
Pump assemblies and components
1 800 468 2326
408 321 8500
FAX: 408 321 8466
129
Seals & O-Rings
SEALS &
O-RINGS
Seals & O-Rings
Directed Light carries a wide selection of commonly used seals and O-Rings conveniently packaged
in kits for many makes and models of laser systems. Many O-Rings are also sold separately.
Raytheon SS500 seal kit
O-Rings
1 800 468 2326
408 321 8500
FAX: 408 321 8466
130
ELECTRICAL
COMPONENTS
Directed Light carries a wide selection of commonly used electrical components including
circuit boards, transformers, capacitors, semiconductors, resistors, fuses, circuit breakers, relays,
switches, potentiometers, indicator bulbs, fans, spark gaps, cables, and ballast tubes. Contact
our customer service department for information on your electrical components requirements.
Ballast tubes
Circuit boards
Transformers and capacitors
Circuit breakers, relays, semiconductors,
fuses, resistors, SCRs and diodes
Fans, potentiometers, switches, indicator bulbs and spark gaps
1 800 468 2326
408 321 8500
FAX: 408 321 8466
131
Diagnostic and Safety Equipment
DIAGNOSTIC
AND SAFETY
EQUIPMENT
When maintaining or troubleshooting a laser system, the proper tools can make the difference
between a straightforward task, skillfully performed, and frustration. To help our customers
make the most of their valuable time, Directed Light carries an array of practical diagnostic and
safety equipment including protective eyewear, autocollimators, laser power meters and probes,
beam imaging equipment, HeNe alignment lasers and RF instruments.
Remember, industrial laser systems can be dangerous. Improper service procedures can lead
to serious injury or death. Industrial lasers should be serviced only by trained technicians.
Autocollimators
Autocollimators are used to align the
optical components on an Nd:YAG laser
rail. The autocollimator system consists
of an illumination bulb and power
supply, a projection lens system and a
viewing eyepiece. After ensuring that the
laser system is completely shut off, the technician uses the autocollimator to project a beam of
light down the optical path, through the Nd:YAG rod and the front and rear mirrors. Each optical
surface will send a reflection back to the autocollimator. These reflections can be viewed through
the eyepiece. The technician aligns or “tunes” the laser rail by mechanically adjusting each
optical component until the reflected spots are overlapping. Once the reflections are overlapping,
the system is ready to lase. Fine tuning for best mode and peak power can then be performed with
an imaging plate and power meter.
Laser Power Meters
Power meters are extremely useful instruments
for anyone operating, troubleshooting or tuning a
laser system. With a properly selected detector
head, a power meter can be used to continuously
monitor the output power or per-pulse energy in a
laser beam. This continuous use capability is
very helpful when tuning a laser for peak output
power. Displays are available with analog or
digital readout. The more sophisticated consoles
can provide a wide range of real time and recorded
data on the laser’s performance.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
132
Ophir laser power meters
DIAGNOSTIC
AND SAFETY
EQUIPMENT
Protective eyewear
Protective Eyewear
Protective eyewear is a must when working with an unshielded Nd:YAG laser beam. Several
styles of safety glasses and goggles are available. Lenses are made of plastic or glass filtering
material. Plastic lenses are lightweight and less expensive than glass lenses. However, glass has
better visible transmission. This makes glass lenses more comfortable to wear, and a must for
viewing a HeNe alignment laser.
Glasses can be ordered with a corrective prescription, bifocal or no correction. Goggles will fit
comfortably over the wearer’s regular prescription glasses.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
133
DIAGNOSTIC
AND SAFETY
EQUIPMENT
RF power meter
RF Instruments
RF power meters are used for troubleshooting and tuning RF drivers for Q-switched
systems. Various frequency range elements and dummy loads are availalble.
NeHe laser system
HeNe Lasers
1 800 468 2326
408 321 8500
FAX: 408 321 8466
134
Low power Helium-Neon (HeNe) lasers are often used to assist in the alignment of optical
components on Nd:YAG and CO2 lasers. Also, many materials processing lasers employ a HeNe
laser beam coaxially with the main laser beam. The coaxial red HeNe spot allows the operator
to see exactly where the invisible CO2 or Nd:YAG spot is hitting the workpiece.
Laser Power Probes
DIAGNOSTIC
AND SAFETY
EQUIPMENT
P
ower probes are an inexpensive
alternative to power meters. Like a
meter, a probe can be used to measure power
for operating, troubleshooting or tuning a
laser system. However, power probes cannot
be used continuously or they will overheat.
They are designed for short duration use only
and must be allowed to cool between uses.
Power probes are lightweight, easy to use and
relatively inexpensive.
Beam Imaging Equipment
V
arious types of equipment are available for locating an invisible laser beam and checking
its mode. An infrared (IR) viewer is a hand-held device used for locating an invisible laser
beam at an optical surface. By looking through the IR Viewer, a technician can see exactly where
a laser beam is hitting a mirror. Thermal image plates are used with an ultraviolet lamp for
checking and tuning beam mode. A thermal image plate can be left in the beam path while
mirrors and rods are adjusted to obtain the best mode. Various illuminator cards and mode burn
paper can be used for quick mode spot checks without the need for an ultraviolet lamp. However,
unlike thermal imaging plates, illuminator cards and mode burn paper cannot be left
continuously in a laser beam path.
Infrared viewer
Thermal image plate and UV lamp
1 800 468 2326
408 321 8500
FAX: 408 321 8466
135
CO2 Lenses
CO2 LENSES
CO2 Lenses
Lenses are used in most CO2 laser systems to focus all the beam’s power into a very small spot.
Small, focused spot size is important for a couple of reasons: cutting, welding and heat
treating generally call for high-power density, and power density is a strong function of spot size.
(Reduce the spot diameter by 50% and the power density increases by 200%.) Also, many jobs
demand narrow kerf widths and heat affected zones, which can only be achieved with a
tightly focused beam.
The design variables that will affect the performance of a CO2 laser lens are: focal length,
diameter, shape, material and coating.
Focal Length
Focal length affects both spot size and depth of focus. In general, a shorter focal length will
produce a smaller focused spot and a shorter depth of focus. Usually, the specified focal length is
a compromise between desired spot size, penetration depth and workpiece clearance.
Lens Diameter
Higher power lasers require larger diameter lenses to prevent thermal overload. At any given focal
length, a larger diameter lens will yield a smaller focused spot if the incoming beam is expanded
to fill the larger lens.
Lens Shapes
Plano-convex is the simplest and least expensive lens shape. It is used in such applications as
welding where achieving the smallest spot size is not critical, or at relatively long focal lengths
when more complex shapes would not be beneficial. A plano-convex lens should be oriented with
the flat side toward the workpiece and the convex side toward the laser.
Meniscus lenses have a concave curve on one side and a convex curve on the other. At relatively short
focal lengths, a meniscus lens will yield a smaller focused spot than a plano-convex lens. However,
meniscus lenses are more expensive to manufacture than plano-convex lenses because both sides
are curved. A meniscus lens should be oriented with the concave curve toward the workpiece.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
136
CO2 Lenses
CO2 LENSES
Zinc Selenide plano-convex lenses
Zinc Selenide (ZnSe) has the lowest
absorption of the common CO 2
transmitting materials and is, therefore,
the material of choice for high-power
applications. It is also the only
material that transmits visible light, a
requirement for the use of a HeNe
alignment laser.
Gallium Arsenide plano-convex lenses
Gallium Arsenide (GaAs) is the
material of choice in dirty or highsplatter environments. It has relatively
high hardness which helps repel debris
particles. It also has high thermal
conductivity which helps transmit heat
away from imbedded particles.
Germanium (Ge) can only be used in low power applications because it is subject to thermal
runaway. As temperature increases, its absorption increases, which leads to thermal failure in
high power applications. Ge used to be the lowest cost CO2 lens material because its widespread
use in the semiconductor industry created a large supply. However, the demand for ZnSe for high
power laser applications has increased the supply of ZnSe so greatly that Ge is not always the least
expensive lens material.
ZnSe Lenses for High Pressure Applications
When high pressure assist gases are employed to increase laser cutting speeds, extra thick lenses
must be used to prevent lens distortion or breakage. ZnSe is the preferred substrate material for
extra thick lenses because most applications requiring high pressure assist gas also require high
laser power.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
137
CO2 Mirrors
CO2 MIRRORS
CO2 Mirrors
In any CO 2 system, mirrors are among the most critical components. The design and
manufacturing quality of the laser’s mirrors are crucial to generating, maintaining and
delivering a high-quality laser beam. There are two main categories of laser mirrors: internal
and external.
How They Work
Internal mirrors are used to generate, maintain and amplify the laser beam by forming a reflective
“resonator” around the excited CO2 gas mixture. Internal mirrors are sometimes called resonator
or cavity mirrors.
External mirrors are used to deliver, manipulate, split and focus the laser beam. Most mirrors have
flat reflective surfaces, but some have curved surfaces designed to reduce beam divergence. The
design of the substrate material and coating of a CO2 laser mirror is primarily determined by its
intended function.
Windows are used in some systems as the primary vacuum seal after the front mirror or to
separate an oscillator and amplifier. They are typically simple, flat-parallel or flat-wedged optics
made from transmissive substrates with antireflective coatings on both the inside and the outside
surfaces.
Bending mirrors
1 800 468 2326
408 321 8500
FAX: 408 321 8466
138
CO2 Mirrors
CO2 MIRRORS
Internal Mirrors
Output couplers, also known as front mirrors, are designed to reflect a portion of the beam back
into the laser resonator for continuous amplification while transmitting a portion of the beam to
the outside for use. Therefore, the substrate material must be transmissive at the required
wavelength of 10.6µ. Germanium and Gallium Arsenide substrates are commonly used for low to
medium powered systems. The more expensive Zinc Selenide material is required for higherpowered lasers because of its lower absorption at 10.6 microns.
The outside surface usually has an antireflective coating for improved transmission
efficiency. The inside surface usually has a partially reflective coating to reflect a percentage of
the beam back into the resonator. However, some materials are naturally partially reflective when
polished and left uncoated. For instance, polished, uncoated GaAs and ZnSe are sometimes used
as output couplers because they have natural reflectivities of 27% and 17% respectively.
Circular polarizing mirrors
Zero phase shift mirrors
Zero phase shift mirrors are used when additional bends are required in the beam path after a quarterwave mirror. Standard bending mirrors should not be used after a quarter-wave mirror because they
will "shift the phase" or alter the polarization of the beam. As their name implies, zero phase shift
mirrors do not affect the beam’s polarization phase angle. These mirrors are usually made from
inexpensive silicon substrates (copper is used in very high-power applications). Zero phase shift
coatings are the highest reflectivity, lowest loss coatings available for CO2 laser optics. Polished
Molybdenum is a natural zero phase shift mirror and does not require coating.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
139
CO2 Mirrors
CO2 MIRRORS
Parabolic focusing module mirrors
B
eamsplitters are used to simultaneously
deliver one laser beam to two or more
workstations. This is achieved by
transmitting a portion of the beam while
reflecting the remainder (usually at 90º). A
split ratio of 50/50 is most common;
however, other ratios are available. When
ordering a beamsplitter, the beam’s
polarization must be specified: S, P,
Average, or S and P.
Parabolic focusing mirrors are used on
very high-power lasers when focusing
lenses are impractical. They are usually
made from solid copper substrates because
of copper’s good thermal properties and
can be used coated or uncoated. The coating is an enhanced dielectric and is used if maximum
reflectivity is required. They are usually left uncoated if the application is in a dirty environment
and repeated cleanings are required.
Fold mirrors
Corner or fold mirrors are used to lengthen the resonator beam path to increase gain/power
without physically lengthening the entire system. They are usually made from inexpensive
silicon substrates and have highly reflective coatings. Enhanced or protected silver or gold and
multilayer dielectric coatings are typical. In very high-power systems, copper substrates are used
because of copper's superior thermal conductivity.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
140
CO2 Mirrors
CO2 MIRRORS
Rear mirrors are designed to reflect all or nearly all of a laser beam back through the laser gas
mixture for amplification. The inside surface is given a highly reflective (99-100%) coating. In the
100% reflective case, inexpensive silicon can be used as the substrate material and the outside
surface does not need polishing or coating. Some rear mirrors, however, are designed to transmit
a small (0.5 - 1.0%) percentage of the beam to a power detector for real-time beam monitoring.
These mirrors must have a transmissive substrate (Ge is the most common) and the outside
surface usually has an antireflective coating.
Rear Mirrors
Circular polarizing mirrors are a special type of bending mirror which convert a linearly
polarized beam into a circularly polarized beam. Simply speaking, every laser beam has an
associated electric field. The orientation of this electric field with respect to the direction of beam
propagation can greatly affect how the focused beam cuts or welds a given material. In most CO2
laser systems, the electric field of the output beam is oriented in a plane at 45º from the horizontal
or vertical. This is known as ‘S’ or ‘P’ linear polarization. A linearly polarized beam will interact
differently with the work material depending on the direction of travel. For instance, it may cut
nicely in the X direction but yield excessive burring or a nonperpendicular kerf in the Y direction.
For consistent cutting or welding in all directions, a circularly polarized beam is required.
Quarter-wave and eighth-wave circular polarizing mirrors were developed for this purpose.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
141
CO2 Mirrors
CO2 MIRRORS
Substrates
For CO2 lasers, several substrate materials are available. Silicon is used on low to medium power
systems when cost is a big consideration. Copper, with its superior thermal conductivity is used
for very high-powered systems. Molybdenum is used in dirty environments where durability and
repeated cleanings are required.
Coatings
Historically, coatings of enhanced and protected gold or silver were the industry standards. In
recent years, however, enhanced multilayer dielectric coatings have been developed offering higher
reflectivities and greater durability. These coatings are becoming increasingly popular.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
142
Care and Cleaning of Optics
The care and cleaning of optics is a very important aspect of the use and maintenance of
high-power industrial lasers. The precision optics used in these lasers need to be clean in order
to provide the greatest level of performance. Dirty optics can lead to premature failure of the
optic itself, as well as overall system performance degradation.
As explained in several other sections of
this catalog, laser optics are produced in
two different forms depending on their
application: coated uncoated. Coated
optics have one or more layers of vapor
deposited materials on their surfaces,
designed to produce specific levels of
reflectivity at given wavelengths. The
uncoated optics are intrinsically highly
reflective at given wavelengths and are
therefore simply ground and polished and
left uncoated.
The surfaces of all of the optics, coated or
uncoated, are very susceptible to damage;
some less so than others but all should be
considered fragile. The fewer times an
optic is cleaned and the less pressure
applied during the cleaning, the better.
When an optic gets dirty, there is foreign
matter on its surface. This is bad for
several reasons: the foreign matter will
inhibit transmission and/or reflection and
will absorb energy causing the optic to
heat and potentially deform. If the energy
absorption of the foreign matter is high
enough, it may cause a burn on the
surface of the optic, whether it is coated
or not. When a burn mark appears on the
surface of the optic, all the cleaning in the
world will not remove it. If the optic is
coated, several layers of the coating may
CARE AND
CLEANING OF
OPTICS
be damaged. If it is uncoated, residue
from the burn may permanently adhere to
the surface of the optic. These burned
areas absorb at a higher level than all the
rest of the optic, thus creating a hot spot.
This hot spot causes the optic to deform
in a non-uniform fashion, which will
affect the ability of the optic to do its job.
The best way to avoid damaged optics is
to keep them clean at all times. This is
obviously easier said than done and, if all
the optics are being cleaned too regularly,
their life span can be dramatically
shortened. The first thing to do is keep
the laser system clean and in good
working order, and inspect and clean
your optics as needed. The second thing
to do is follow the proper optics cleaning
guidelines.
Optics Kit (TST-10839):
Materials included:
1. Dropper bottle for reagent grade
methanol (not included).
2. Lens tissue; long fiber, low ash content
with no chemical additives (50 sheets)
(TST-11006)
3. Clean air duster
4. Finger cots (12)
5. Cotton swabs (12)
1 800 468 2326
408 321 8500
FAX: 408 321 8466
143
CARE AND
CLEANING OF
OPTICS
Applying drops of solvent to the optic and
lens tissue
Dragging the lens tissue across the face of
the optic, removing contaminants and
leaving no residual solvent
Procedure for cleaning optics
1 800 468 2326
408 321 8500
FAX: 408 321 8466
144
This optics cleaning procedure will minimize scratches and provide an effective means for removal
of dust and dirt films which may have contaminated an optical component. Following these steps
will develop good cleaning habits, which will contribute to a longer and more productive life for
your optical components:
A. Set aside a clean work area.
B. For best results, optics to be cleaned should be removed from the laser system and their mounts.
If the optic is mounted, it is impossible to use the recommended cleaning process. Further, the
tendency to “scrub” the optic is significant, and will only lead to surface damage and
premature failure. It is impossible to get an optic thoroughly clean without removing it from
the system and its mount. Holding it by its edges, inspect the surface to be cleaned by
illuminating it with a high intensity light. This will highlight dust particles and films better than
average room light.
C. Using the clean air duster, blow the surface of the optic to dislodge any loose particles.
D. Place the optic on a piece of clean lens tissue.
E. The method recommended by Directed Light is the “drop and drag method.” This method
depends on the surface tension of the solvent on the optic to create pressure. No other pressure
is applied. The lens tissue is laid on the optic surface to be cleaned so that the optic is at one
end of the tissue. Enough solvent is applied to make the entire surface of the optic wet,
including the tissue. The lens tissue is now slowly pulled parallel to the surface being cleaned
until the optic surface is completely dry. If the end of the tissue is reached before the optic is
dry, the process should be repeated with slightly less solvent or a larger piece of tissue. Never
reuse lens tissue!
A curved optical surface is somewhat more difficult to clean as the surface tension of the
solvent is not always strong enough to hold the lens tissue down to the surface. In this case,
the process should simply be repeated until the optic is 100% clean. The lens tissue should
not be reused.
F. Inspect the cleaned surface under the high intensity light.
G. Repeat steps E and F until surface is clean or it is determined the optic has permanent damage.
CARE AND
CLEANING OF
OPTICS
Some good practice tips:
• Reagent grade methanol is a high purity chemical. The dispensing container should be rinsed
out with the methanol before filling. Never insert lens tissue, cotton swabs, fingers, etc., into the
methanol. Always drip the methanol onto the material. This eliminates contamination of the
methanol or its container.
• Lens tissue, when dry, is very abrasive to optical surfaces and will scratch them.
• Always hold optics by their edges.
• Once an optic is cleaned, install it or keep it covered. This will ensure that airborne particles
will not have a chance to settle on the optic.
• Store your cleaning materials in a clean, covered area.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
145
Glossary of Laser Terms
GLOSSARY OF
LASER TERMS
ABSORB: To transform radiant energy into
a different form, usually with a resultant
rise in temperature.
ABSORBANCE: The ability of a medium
to absorb radiation depending on
temperature and wavelength. Expressed
as the negative common logarithm of the
transmittance.
ABSORPTION COEFFICIENT: The amount
of radiant energy absorbed per unit or
path-length.
AMPLIFICATION: The growth of the
radiation field in the laser resonator
cavity. As the light wave bounces back
and forth between the cavity mirrors, it is
Amp stimulated emission on each pass
through the active medium.
AMPLITUDE: The maximum value of the
electromagnetic wave, measured from
the mean to the extreme; put simply, the
height of the wave. (See drawing under
“polarization.”)
ANGLE OF INCIDENCE: see “INCIDENT
LIGHT.”
ANODE: An electrical element in laser
excitation which attracts electrons from a
cathode. An anode can be cooled directly
by water or by radiation.
AR COATINGS: Anti-reflection coatings,
used on the backs of laser output mirrors
to suppress unwanted multiple reflections
which reduce power.
AUTOCOLLIMATOR: A single instrument
combining the functions of a telescope
and a collimator to detect small angular
displacements of a mirror by means of its
own collimated light.
AXIAL-FLOW LASER: The simplest and
most efficient of the gas lasers. An axial
flow of gas is maintained through the tube
to replace those gas molecules depleted
by the electrical discharge used to excite
the gas molecules to the lasing state (See
“GAS DISCHARGE LASER.”)
AXIS, OPTICAL AXIS: The optical centerline for a lens system; the line passing
through the centers of curvature of the
optical surfaces of a lens.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
146
BEAM BENDER: Hardware assembly or
optical device, such as a mirror, capable
of changing laser direction; used to
re-point the beam and in “folded, ”
compact delivery systems.
BEAM DIAMETER: The diameter of that
portion of the beam which contains 86%
of the output power.
BEAM EXPANDER: Optical splitting a
laser beam into two or more beams,
allowing work on more than one side of a
part at the same time – but at somewhat
lower power than with a multiple-output
beam system.
BREWSTER WINDOWS: The transmissive
end (or both ends) of the laser tube, made
of transparent optical material and set at
Brewster’s angle in gas lasers to achieve
zero reflective loss of vertically polarized
light. Non-standard on industrial lasers,
but a must if polarization is desired.
BRIGHTNESS: The visual sensation of the
luminous power of a light beam, as
opposed to scientifically measured power
of the beam.
CALORIMETER: An instrument which
measures the heat generated by absorption of the laser beam.
CATHODE: The element providing the
electrons for the electrical discharge used
to excite the lasing medium.
CO2 LASER: A laser largely used in
industry in which the primary lasing
medium is carbon dioxide.
COAXIAL GAS: Most laser welding is
done with a shield of inert gas flowing
over the work surface to prevent plasma
oxidation and absorption, to blow away
debris, and to control heat reaction. The
gas jet has the same axis as the beam so
the two can be aimed together.
COHERENT LIGHT, COHERENT RADIATION:
Radiation composed of wave trains
vibrating in phase with each other. Simply
expressed: parallel rays of light.
COLLIMATED LIGHT: Divergent light rays
rendered parallel by means of a lens or
other device, allowing a sharp image of
the object to be focused at the focal plane
of the lens.
COLLIMATION: The process by which
divergent rays (white, or natural, light) are
converted into parallel rays (coherent light).
CONVERGENCE: The bending of light rays
toward each other, as by a positive
(convex) lens.
CW: Continuous Wavefront; the continuousemission mode of a laser, as opposed to
pulsed operation.
DEPTH OF FIELD: The working range of the
beam, a function of wavelength, diameter
of the unfocused beam, and focal length
of the lens. To achieve a small diameter
spot size, and thus a high power density,
a short depth of field must be accepted.
DIVERGENCE: The angle at which the
laser beam spreads in the far field; the
bending of rays away from each other, as
by a concave lens or convex mirror.
DUTY CYCLE: The length of time the laser
beam is actually cutting, drilling, welding,
or heat-treating, as compared to the
entire work cycle time.
ELECTROMAGNETIC WAVE: A disturbance
which propagates outward from an
electric charge which oscillates or is
accelerated. Includes radio waves;
X-rays, gamma rays; and infrared, ultraviolet, and visible light.
EMISSIVITY, EMITTANCE: Rate at which
emission takes place; the ratio of the
radiant energy emitted by a source or
surface to that emitted by a blackbody at
the same temperature.
ENHANCED PULSING: Electronic modulation of a laser beams to produce high
peak power at the initial stage of the
pulse. This allows rapid vaporization of
the material without heating the surrounding area. Such pulses are many
times the peak power of the CW mode.
EXPOSURE: A measure of the total
radiant energy incident on a surface per
unit area; radiant exposure.
FAR-FIELD IMAGING: An imaging technique
with solid-state lasers that has several
limitations: non-uniform energy distribution, very short working distances,
and poor control of hole geometry.
FLASHLAMP: Source of powerful light; often
in the form of a helical coil and used to excite
photon emission in a solid-state laser.
FLUORESCENCE: The glow induced in a
material when bombarded by light. Brewster windows of fused silica fluoresce in UV
light, increasing absorption of laser radiation and degrading laser mode and output.
FLUX: The radiant, or luminous, power of
a light beam; the time rate of the flow of
radiant energy across a given surface.
FOCUS: Noun: The point where rays of
light meet which have been converged by
a lens, giving rise to an image of the
source. Verb: To adjust focal length for the
clearest image.
FOCAL POINT: The focal point of the beam
relative to the work surface. Has a critical
effect, such as the depth and shape of
drilled holes. When the focal point is at
the surface, holes are of uniform diameter.
When the focus is below the surface,
conical holes are drilled.
FOLDED RESONATOR: Construction in
which the interior optical path is bent by
mirrors mounted on corner blocks bolted
into pre-aligned position, permitting
compact packaging of a long laser cavity.
FREQUENCY: The number of light waves
passing a fixed point unit of time, or the
number of complete vibrations in that
period of time.
GAS DISCHARGED LASER: An assisting
coaxial gas, such as oxygen, argon, or
nitrogen, which may be used to achieve
very high power levels for cutting certain
metals.
GAS TRANSPORT: A laser design which
generates very high beam power within a
fairly small resonator structure. Long
electrodes parallel the axis and gas is
circulated across the resonator cavity.
GAUSSIAN: The normal “curve,” or
distribution, an example of which is the
symmetrical bell shape of the holes created
by the uncorrected, unfocused laser beam
in its optimum mode. A Gaussian laser
beam has most of its energy in the center.
HAZ: Heat-Affected Zone, or the area
where laser beam and metal (or other)
surface are in contact.
HELIUM-NEON LASER: (“HeNe”), Laser
in which the active medium is a mixture
of helium and neon, which is in the visible
range. Used widely in industry for alignment, recording, printing, and measuring,
it is also valuable as a pointer or aligner
of invisible CO2 laser light.
HEAT SINK: A substance or device used to
dissipate or absorb unwanted heat, as
from a manufacturing process (or, with
lasers, from reflected rays).
HERTZ: The approved international term,
abbreviated Hz, which replaces CPS for
cycles per second.
INCIDENT LIGHT: A ray of light that falls
on the surface of a lens – or any other
object. The “angle of incidence” is the
angle made by the ray with a perpendicular to the surface.
ION LASER: A type of laser employing a
very high discharge current, passing
down a small bore to ionize a noble gas
such as argon or krypton. The ionization
process creates a population inversion for
lasing to occur. A research laser useful for
some industrial applications.
INTENSITY: The magnitude of radiant
energy (light) per unit, such as time or
reflecting surface.
JOULE: One watt per second; a measurement frequently given for laser output in
pulsed operation.
KEYHOLING: In welding, the deeppenetration holes, which fill quickly with
molten metal, that can be made in a few
milliseconds by laser.
LASER: An acronym: Light Amplification
by Stimulated Emission of Radiation. A
laser is a cavity that has mirrors at the
ends and is filled with lasable material
such as crystal, glass, liquid, gas, or dye.
These materials must have atoms, ions,
or molecules capable of being excited to
a metastable state by light, electric
discharge, or other stimulus. The transition from this metastable state back to the
normal ground state is accompanied by
the emission of photons which form a
coherent beam.
LASER ACCESSORIES: The hardware and
options available for lasers, such as
secondary gases, Brewster windows,
Q-switches, and electronic shutters.
LASER HARDENING: Laser-beam traversal
of metal to harden quenching process
producing the maximum hardness for
most metals.
LASER OSCILLATION: The buildup of the
coherent wave between laser cavity end
mirrors. In CW mode, the wave bounding
back and forth between mirrors transmits
a fraction of its energy on each trip; in
pulsed, operation, emission happens
instantaneously.
LASER ROD: A solid-state, rod-shaped
lasing medium in which ion excitation is
caused by a source of intense light, such
as a flashlamp. Various materials are used
for the rod, the earliest of which was
synthetic ruby crystal.
LEADING EDGE SPIKE: The initial pulse
in a series of pulsed laser emissions, often
useful in starting a reaction at the target
surface. The trailing edge of the laser
power is used to maintain the reaction
after the initial burst of energy.
LIGHT: The range of electromagnetic
radiation frequencies detected by the eye,
or the wavelength range from about 400
to 750 nanometers. It is sometimes
extended to include photovoltaic effects
and radiation beyond visible limits.
LUMINANCE: Commonly called
illumination; the luminous or visible flux
per unit area on a receiving surface at any
given point.
MENISCUS LENS: The lens used
primarily in CO2 lasers. It has one side
convex, the other concave.
MODE: A particular functioning
arrangement, setup, or condition for laser
operation, such as continuous emission,
pulses, or grouped pulses. “Mode” also
described the cross-sectional shape of
the beam. (See “TEM.”)
GLOSSARY OF
LASER TERMS
MODULATION: The ability to superimpose
an external signal on the output beam of
the laser as a control.
NANOMETER: A unit of length in the International System of Units (SI) equal to one
billionth of a meter (109 meter). Once
called a millimicron, it is used to
represent wavelength. Abbreviated “nm.”
Nd:GLASS LASER: A solid-state laser
of Neodymium:glass offering high
power or short pulses, or both, for
specific industrial applications.
Nd:YAG LASER: A solid-state laser of
Neodymium: Yttrium-Aluminum Garnet,
similar to the Nd:glass laser. Both are
pumped by flashlamps.
NEMA: National Electrical Manufacturers’
Association, a group which defines and
recommends safety standards for electrical
equipment.
OPTICAL DENSITY: Protection factor provided
by a filter (such as used in eyewear,
viewing windows, etc.) at a specific
wavelength. Each unit of OD represents a
10x increase in protection.
OPTICAL FIBER: Filament of quartz or
other optical material capable of transmitting light along its conformation and
emitting it at the end.
OPTICAL PUMPING: Exciting the lasing
medium by the application of light rather
than electrical discharge from anode and
cathode.
OUTPUT COUPLER: The resonator mirror
which transmits light: the one at the
opposite end is totally reflective.
OUTPUT POWER: The energy per second
emitted from the laser in the form of
coherent light, usually measured in watts
for continuous-wave operation and joules
for pulsed operation.
OXYGEN ASSIST: In certain cutting
operations, coaxial oxygen initiates an
exothermic reaction to enhance the
cutting rate for thick metals; in other
words, oxygen actually does the cutting,
with the reaction being maintained
by the laser beam.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
147
GLOSSARY OF
LASER TERMS
PHOTON: In quantum theory, the elemental
unit of light, having both wave and
particle behavior. It has motion, but no
mass or charge.
PLASMA: In laser welding, a metal vapor
that forms above the spot where the
beam reacts with the metal surface. Also
used to describe the laser tube (plasma
tube, discharge tube) which contains the
completely ionized gas in certain lasers.
POLARIZATION: Restriction of the vibrations
of the electromagnetic field to a single
plane, rather than the innumerable
planes rotating about the vector axis. This
prevents optical losses at interfaces
between the lasing medium and optical
elements. Various forms of polarization
include random, linear (plane), vertical,
horizontal, elliptical, and circular. Of two
polarization components, S and P, the P
component has zero losses at Brewster’s
angle. (See “BREWSTER WINDOWS.”)
POPULATION INVERSION: When more
molecules (atoms, ions) in a laser are in a
metastable state than in the ground state
(a situation needed for sustaining a
high rate of stimulated emissions), a
“population inversion” is said to exist.
Without a population inversion, there can
be no lasing action.
POWER DENSITY: The amount of radiant
energy concentrated on a surface.
POWER METER: An accessory used to
monitor laser beam power at the rear
reflector, tune the beam for optimum
power, or monitor power delivered to
the work station.
POWER RAMPING: A controlled change
in the power level of a laser beam, either
linearly, as up a ramp, across, and down
again – or in several discrete steps. Useful
for smooth completion of circular welds
and for preventing fractures from rapid
cooling.
1 800 468 2326
408 321 8500
FAX: 408 321 8466
PULSE ENERGY: The power of a single,
brief emission from a laser programmed
for pulsed behavior rather than continuous
wave (CW) operation. Pulse energy can be
several times greater than CW emission.
Q-SWITCH: A device that has the effect of
a shutter moving rapidly in and out of the
beam to “spoil” the resonator’s normal Q,
keeping it low and preventing lasing
action until a high level of energy is
stored. Result: A huge pulse of power
when normal Q is restored.
RAMAN EFFECT: Part of the energy in a
photon is transferred to (or from) the
vibrational/rotational energy of a molecule.
RAMPER: Power controls for accomplishing
the ramping steps; may be computercontrolled.
REFLECTANCE: The ratio of the reflected
flux to the incident flux, or the ratio of
reflected light to light falling on the object.
REFLECTION: The return of radiant energy
(incident light) by a surface, with no
change in wavelength.
REFRACTION: The change of direction of
propagation of any wave, such as an electromagnetic wave, when it passes from
one medium to another in which the wave
velocity is different. Simply put, the bending of incident rays as they pass from one
medium to another, such as air to water.
RESOLUTION: Resolving power, or the
quantitative measure of the ability of an
optical instrument to produce separable
images of different points on an object;
the capability of making distinguishable
the individual parts of an object, closely
adjacent images, or sources of light.
RESONATOR: The mirrors (or reflectors)
making up the laser cavity containing the
laser rod or tube. The mirrors reflect light
back and forth to build up amplification
under an external stimulus. Emission is
through one of them, called a coupler,
which is partially transmissive.
ROTATING LENS: Beam delivery in a
circular movement for cutting largediameter holes.
STIMULATED EMISSION: When an atom,
ion, or molecule capable of lasing is
excited to a higher energy level by an
electric charge or other means, it will
spontaneously emit a photon as it decays
to the normal ground state. If that photon
passes near another atom of the same
frequency which is also at some
metastable energy level, the second atom
will be stimulated to emit a photon. Both
photons will be of the same wavelength,
phase, and spatial coherence. Light
amplified in this manner is intense,
coherent, and monochromatic. In short,
laser light.
TEM: Abbreviation for “Transverse
Electromagnetic Mode, ” the crosssectional shape of the working laser
beam. An infinite number of shapes can
be produced, but only a relatively small
number are needed for industrial applications. In general, the higher the TEM, the
coarser the focusing.
• TEM00 – A Gaussian-curve mode that is
the best collimated and produces the
smallest spot of high power density for
drilling, welding and cutting.
• TEM01 – Divided into two equal beams
for special applications.
THRESHOLD: During excitation of the
laser medium, this is the point where
lasing begins.
TRANSFORMATION HARDENING: A
process well-suited to lasers which
involves hardening metal by heating it to
the critical temperature for transformation, quenching it, and solidifying it with
uniform distribution of its carbon content.
TREPANNING THE BEAM: Relative
motion of the beam with respect to the
part, usually in a circular fashion (see
“ROTATING LENS”).
VISIBLE LIGHT TRANSMISSION /
TRANSMITTANCE: The amount of visible
light that passes through a filter. As a rule,
as optical density increases, visible light
transmission decreases.
WAVE: An undulation or vibration, a
form of movement by which all radiant
energy of the electromagnetic spectrum
is thought to travel.
WAVELENGTH: The fundamental property
of light – the length of the light wave,
which determines its color. Common units
of measurement are the micron, the
nanometer, and the angstrom.
WINDOW: A piece of glass with plane
parallel sides which admits light into or
through an optical system and excludes
dirt and moisture.
Information courtesy of Photonics Spectra.
148
COMMON
FORMULAS
FOR LASER
APPLICATIONS
Common formulas for laser applications
Average Power
(Watts)
= Pulse energy (joules) x pulse repetition rate (Hz)
PA = ER
Average Power
(Watts)
= Peak power pulse (Watts) x pulsewidth (Sec.) x pulse repetition rate (Hz)
PA = PPTR
Brightness
Power (Watts)
= _______________________________________________________
[Beam diameter (MM) x Beam divergence (mr)]2
LAMP
ENVELOPE
MATERIAL
TRANSMISSION
CURVE
P
B = ––––––––––––––––––––
(ΘD) 2
Pulse Energy
(Joules)
= Peak power pulse (Watts) x pulsewidth (sec.)
E = PPT
Light Transmission
=
Intensity of light after passing through filter
= Tλ
Intensity of light
Optical Density
Spot Size
= -1 Log (light transmission)
-OD
Tλ = 10
= Diffraction limited spot + spherical aberration
dd = 1.27
λfM 2
D
Lamp envelope material transmission curve
1 800 468 2326
408 321 8500
FAX: 408 321 8466
149
UNIFORM
INTENSITY
DISTRIBUTION
GAUSSIAN
INTENSITY
DISTRIBUTION
RADIAL
INTENSITY
DISTRIBUTION
Uniform intensity distribution
When a lens system is irradiated at its aperture with a uniform intensity distribution, a diffraction pattern is
formed at the focus. The pattern consists of a bright central spot surrounded by rings of rapidly diminishing
intensity. The diameter of the central spot, known as the Airy disc, is approximated by this equation:
S = 2.44λF/#
where S is the diameter of the central spot, l is the wave length of the source,
and F/# is the ratio of the focal length to the lens aperture. In the absence of any
lens imperfection, 84% of the energy is contained within the diameter S and the
remainder is distributed in the outer rings. If a difference exists between the
longest and shortest optical paths leading to a focus, a change in the size of the
central spot as well as a redistribution of energy occurs. For an optical path
difference of one quarter of the wave-length (l/4), the size of the central spot is
essentially unchanged, but there is a decrease of energy from the central spot to
68%. Traditionally, when this l/4 limit on optical paths (known as the Rayleigh
criterion) is not exceeded, the lens system is considered diffraction limited.
Gaussian intensity distribution
In the case of a lens system irradiated by a laser operating in the fundamental transverse mode (TEMoo),
some flexibility is required in assigning a diffraction-limited label to the lens system.
The Gaussian distribution which
1.0
describes the fundamental mode of
a laser is given by the formula:
2 P0
2a
2 2
.5
where Po is the total output power, I(r) = πa2 e 2r /a
I(r) is the intensity at the distance r
.o
from beam center and a is the radius
2.0
1.0
0
1.0
2.0
2
where the intensity falls to I/e or
r/a
13.5” of the central intensity. The
accepted beam diameter of the laser is defined as 2a and contains 86.5% of the total beam power.
Radial intensity distribution
1.0
TEM 00
0.8
0.6
0.4
TEM 01
1 800 468 2326
408 321 8500
FAX: 408 321 8466
0.2
TEM 10
0
2.0
1.6
w 10
150
w 01*
0.8
1.2
0.4
0
0.4
0.8
1.2
1.6
2.0
w 00
ELLIPTICAL
PUMP CAVITY
Elliptical pump cavity
WAVELENGTH
CHART
SPOT SIZE
VS. BEAM
DIAMETER
Wavelength chart
Spot size vs. beam diameter
5.0 Inch Focal Length Plano Convex
7.8
6.5
6.5
Spot Size – Inches x 10-3
Spot Size – Inches x 10-3
2.5 Inch Focal Length Plano Convex
7.8
5.2
3.9
2.6
1.3
5.2
3.9
2.6
1.3
0
0
.157
.315
.472
.630
.787
.944
Beam Diameter In Inches
1.10
1.26
.157
.315
.472
.630
.787
.944
1.10
1.26
Beam Diameter In Inches
1 800 468 2326
408 321 8500
FAX: 408 321 8466
151
COMMON
ABBREVIATIONS
DECIMAL
EQUIVALENTS
Common abbreviations
BTU
°C
CAL
C. C.
CU. FT.
CU. IN.
°F
FPS
FT
GAL
GPM
HP
IN
°K
LB
MIN
PSI
REV
SEC
SP. GR.
SP. HT.
SP. WT.
SQ. IN.
British thermal unit – 1 BTU = Heat required to raise temperature of 1 pound of water
1°F.
Degrees Centigrade
Calorie – 1 CAL. = Heat required to raise temperature of one gram of water 1°C.
Cubic centimeter
Cubic feet
Cubic inches
Degrees Fahrenheit
Feet per second
Feet (foot)
U.S. gallon
Gallons per minute
Horsepower = work at rate of 33, 000 Ft. Lb./Min.
Inch(es)
Degrees Kelvin
U.S. pound
Minute(s) in time
Pounds per square inch
Revolutions (of a shaft or pump)
Second(s) of time
Specific gravity – ratio of the weight of a body top the weight of an equal volume of water
at 4°C or other specified temperature
Specific heat – ratio of heat required to raise a unit of weight of a substance 1°F to the
amount of heat required to raise an equal weight of water 1°F at a certain temperature
Specific weight or weight density = Lb./Cu. Ft.; Lb./Cu. In. or grams/C.C.
Square inch(es)
Decimal equivalents
8ths
1/8 = .125
1/4 = .250
3/8 = .375
1/2 = .500
5/8 = .625
3/4 = .750
7/8 = .875
1 800 468 2326
408 321 8500
FAX: 408 321 8466
152
16ths
1/16 = .0625
3/16 = .1875
5/16 = .3125
7/16 = .4375
9/16 = .5625
11/16 = .6875
13/16 = .8125
15/16 = .9375
32nds
1/32 = .0125
3/32 = .09375
5/32 = .15625
7/32 = .21875
9/32 = .28125
11/32 = .34375
13/32 = .40625
15.32 = .46875
17/32 = .53125
19/32 = .59375
21/32 = .65625
23/32 = .71875
25/32 = .78125
27/32 = .84375
29/32 = .90625
31/32 = .96875
64ths
1/64 = .015625
3/64 = .046875
5/64 = .078125
7/64 = .109375
9/64 = .140625
11/64 = .171875
13/64 = .203125
15/64 = .234375
17/64 = .265625
19/64 = .296875
21/64 = .328125
23/64 = .359375
25/64 = .390625
27/64 = .421875
29/64 = .453125
31/64 = .484375
33/64 = .515625
35/64 = .546875
37/64 = .578125
39/64 = .609375
41/64 = .640625
43/64 = .671875
45/64 = .703125
47/64 = .734375
49/64 = .765625
51/64 = .796875
53/64 = .828125
55/64 = .859375
57/64 = .890625
59/64 = .921875
61/64 = .953125
64/65 = .984375
MILLIMETERS
TO INCHES
EQUIVALENTS
Millimeter to inches equivalents
1mm = 0.039 in.
2mm = 0.079 in.
3mm = 0.118 in.
4mm = 0.157 in.
5mm = 0.197 in.
6mm = 0.236 in.
7mm = 0.276 in.
8mm = 0.315 in.
9mm = 0.354 in.
10mm = 0.394 in.
11mm = 0.433 in.
12mm = 0.472 in.
13mm = 0.512 in.
14mm = 0.551 in.
15mm = 0.590 in.
16mm = 0.630 in.
17mm = 0.669 in.
18mm = 0.709 in.
19mm = 0.748 in.
20mm = 0.787 in.
21mm = 0.827 in.
22mm = 0.866 in.
23mm = 0.905 in.
24mm = 0.944 in.
25mm = 0.984 in.
25.4mm = 1 in.
TEMPERATURE
CONVERSIONS
Temperature conversions
°C
-200
-180
-160
-140
-120
-100
-95
-90
-85
-80
-75
-70
-65
-60
-55
-50
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
5
10
15
20
°F
-328
-292
-256
-220
-184
-148
-139
-130
-121
-112
-103
-94
-85
-76
-67
-58
-49
-40
-31
-22
-13
-4
5
14
23
32
41
50
59
68
Temperature conversion formulas:
°C
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
110
120
130
140
150
160
170
180
190
200
210
212
220
230
°F
77
86
95
104
113
122
131
140
149
158
167
176
185
194
203
212
230
248
266
284
302
320
338
356
374
392
410
414
428
446
°C = 5/9 (°F -32)
°C
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
410
420
430
440
450
460
470
480
490
500
510
520
530
°F
464
482
500
518536
554
572
590
608
626
644
662
680
698
716
734
752
770
788
806
824
842
860
878
896
914
932950
968
986
°F = 9/5 (°C +32)
°C
540
550
560
570
580
590
600
610
620
630
640
650
660
670
680
690
700
710
720
730
740
750
760
770
780
790
800
810
820
830
°F
1004
1022
1040
1058
1076
1092
1112
1130
1148
1166
1184
1202
1220
1238
1256
1274
1292
1310
1328
1346
1364
1382
1400
1418
1436
1454
1472
1490
1508
1526
1 800 468 2326
408 321 8500
FAX: 408 321 8466
153
FLOW RATES
& PRESSURE
CONVERSIONS
Flow Rates & Pressure Conversions
Flow Rate
From/to
lit/sec
gal/min
ft3/sec
ft3/min
bbl/hr
bbl/day
lit/sec
1
0.06309
28.32
0.4719
0.04415
0.00184
gal/min
15.85
1
448.1
7.481
0.6997
00.02917
ft3/sec
0.03532
0.00223
1
0.01667
0.00156
6.50X10-5
ft3/min
2.119
0.1337
60
1
0.09359
0.00390
bbl/hr
22.66
1.429
641.1
10.69
1
0.04167
bbl/day
543.8
34.30
1.54x104
256.5
24
1
Pressure Conversion
From/ to
mm Hg
in Hg
in H2O
ft H2O
atm
lb/in2
kg/cm2
1 800 468 2326
408 321 8500
FAX: 408 321 8466
154
mm Hg
1
25.40
1.868
22.42
760
51.71
735.6
in Hg
0.03937
1
0.07355
0.8826
29.92
2.036
28.96
in H2O
0.5353
13.60
1
12
406.8
27.67
393.7
ft H2O
0.04460
1.133
0.08333
1
33.90
2.307
32.81
atm
0.00132
0.03342
0.00246
0.02950
1
0.06805
0.9678
lb/in2
0.01934
0.4912
0.03613
0.4355
14.70
1
14.22
kg/cm2
0.00136
0.03453
0.00254
0.03048
1.033
0.07031
1
INTERNATIONAL
SYSTEM OF
UNITS (SI)
PREFIXES AND
SYMBOLS
million millions
(British billion) 10 12
or trillion
X
PR
EF
I
BO
L
SY
M
QU
AN
TI
TY
M
UL
TI
PL
IE
R
Prefixes and Symbols
T
tera
thousand millions
(American billion)
10 9
G
giga
millions
10 6
M
mega
thousands
10 3
k
kilo
hundreds
10 2
h
hecto
tens
10
da
deca
(or deko)
UNITY
tenths
10 -1
d
deci
hundredths
10 -2
c
centi
thousandths
10 -3
m
milli
millionths
10 -6
μ
micro
thousandths of a
millionth (millimicro)
or billionths
10 -9
n
nano
millionths of a
-12
millionths (micromicro) 10
or trillionths
p
pico
thousandths of a millionth 10 -15
of a millionth (millimicromicro)
or quadrillionths
f
femto
millionths of a millionth
-18
of a millionth or quintillionths 10
a
atto
MULTIPLES
SUBMULTIPLES
OR FRACTIONS
1 800 468 2326
408 321 8500
FAX: 408 321 8466
155
1960: Ted Maiman of Hughes developed the first ruby lasers.
1961: First helium-neon laser was
developed.
1962: Development of pulsed diode
laser, operating at liquid-nitrogen
temperatures. Invention of visible
LED.
1963: CO2 laser developed.
1964: Nd:YAG and Argon-ion lasers
introduced.
1965: Surgical CO 2 laser developed.
1966: Invention of dye laser.
1967: Tunable dye laser invented.
1969: Ruby laser rangefinder developed by U.S. Army.
1970: CW dye laser, CW GaAlAs
diodes developed.
1971: First nitrogen laser developed.
1972: U.S. Army uses laser designators in Vietnam.
1974: Air-cooled CW YAG laser,
supermarket scanner UPC code
appear.
1975: CW diode laser introduced
commercially; development of raregas halide excimer.
1976: Federal enactment of laser
safety code; introduction of InGaAsP
diode laser.
1977: 100-year life for Ga AlAs lasers
extrapolated by Bell Labs; first
appearance of quantum-well diode
lasers.
1978: Commercial introduction of
unstable resonator YAG; Shiva laser
with 20 beams tested at Livermore;
color-center lasers developed.
1979: Creation of radio-frequencyexcited wave-guide CO2 laser.
1980: Development of 200-W krypton fluoride excimer laser.
1981: Introduction of 100-mW diode
laser.
1983: U.S. Air Force Airborne Laser
Laboratory downs missile.
1986: Nova laser becomes operational at Livermore National Lab;
commercial distributed-feedback
diode laser.
1987: Development of commercial
diode-pumped YAG laser.
1988: Commercial red diode lasers,
frequency-doubled diode-pumped
YAG laser.
1989: Introduction of Ti-sapphire
laser; development of VCSELs with
distributed Bragg reflection.
1990: Practical optical parametric
oscillators; 633-nm diode laser; 10
TW from Livermore’s tabletop laser.
1991: 140-laser VCSEL array near
980 nm; AnSe green-emitting diode
laser.
1992: 11-femtosecond Ti-sapphire
pulse; Nd:YAG slab pumped by
diodes yields 1050 W at Livermore.
1993: Commercial 630-nm AlGaInP
diode lasers.
1984: Strained-layer quantum-well
diode laser; laboratory x-ray laser
introduced.
1996: Petawatt laser pulse at Livermore; 23-W fiber laser developed.
1985: Commercialization of wideband tunable isolate for visible and
near-IR; CW AlGaInP laser emits at
671 nm.
1997: 5-ps Ti-sapphire pulses; one
laser generates 206 wavelengths;
groundbreaking for National Ignition
Facility.
633 River Oaks Parkway • San Jose, CA 95134 • Tel: (408) 321-8500 • FAX: (408) 321-8466 • Internet: www.directedlight.com
633 River Oaks Parkway
San Jose, CA 95134
Tel: (408) 321-8500
FAX: (408) 321-8466
Internet: www.directedlight.com

dlicatalog - Directed Light

Transcription

Similar documents

Bystronic - adteknology

5t T Ind Tech Re Pro ntern dia hno esear ocee nati Man ology rch

CO2 laser consumables – Precitec®

CO2 laser consumables – Mazak®