2007 show catalog - RiCOMA Embroidery Machines

The Original
INC.
SEW WHERE YOU HAVE NEVER SEWN BEFORE
7 IN 1 X-CHANGE
2007 SHOW CATALOG
Don’t Settle for anything less than the
Original Fast Frame
INC.
X-Change 7 Frames in One
Msrp
$299.00
Add on’s for “ X” add on per piece
Msrp
$ 40.00
Add on’s for “X” add on per piece (Large sizes)
Msrp
$ 45.00
Single piece hoops
Single piece sleeve hoops
Jumbo single piece hoop
Dog Collar
Military name tape
Msrp
Msrp
$84.00
$116.00
Msrp
Msrp
Msrp
Msrp
Msrp
Msrp
Msrp
$116.00
$268.00
$285.00
$299.00
$499.00
$499.00
$349.00
Universal Hooping stand
Machine Stand for PR600, Baby Lock Pro
PR600, Baby Lock Pro Storage/shipping case
Table Top for PR600/ BABYLOCK PRO
BACKING
4 1/2” x 25 yards White or Black.......... $16.00
8” x 25 yards White or Black............... $26.00
21” x 25 yards White............................ $58.00
Clam Clips Med or Large........................$16.00
1-800-997-8792
1-509-684-2737
1-509-684-2464 fax
WWW.FASTFRAMES.COM
DOG COLLAR / KARATE BELT
SEW AREA 3” X 9”
Suggested for use with
Material on spool
Hoop in 2 seconds
NAME TAPE
The Original
INC.
THIS SET COMES WITH:
THE ARM FOR YOUR MACHINE TYPE
2 X 4 MONO HOOP
2.5 X 4 POCKET HOOP
3 X 4 POCKET HOOP
5 X 4 CHRISTMAS STOCKING HOOP
6” RADIUS HAT HOOP
FOR SIDES AND BACKS OF HATS
7 X 5 ATTACHE CASE HOOP
4.5 x11 SLEEVE HOOP
7 IN 1
- change
2.0” MONO The mono is used on woven (non-stretch ) fabric
The pocket opening must be a minimum of 5 inches. The bobbin arm needs to fit into the pocket and still have room to
7.0” x 5” The wider frame is used on larger bag pockets and
travel. Also used on Socks fanny packs, Cd cases, handy for
flaps. It allows you to do many of the same items as the 5 x 4
non-hoopable items.
The wider frame is used on larger bag pockets and
it allows a larger logo when a bigger sew field is available.
2.5” POCKET The 2.5 is used for many items listed above
it may be used on woven or stretch. (woven must have a 5
1/2 in. opening) When sewing matching men and women’s
garments. The ladies size may have a smaller pocket opening it may require this size and the 3’ for the mans pocket.
3.0” POCKET The pocket hoop is used on pockets that
have stretch (knit or jersey) The stretch allows room for the
bobbin case to fit in the pocket with room for movement.
Also good for drill team socks, short sleeves, Cd cases,
5.0” x 4.0” Comp The comp is used on various material types.
Such as leather, canvas nylon and velvet. It leaves no hoop burn.
Use on bag pockets, flaps, short sleeve shirts and Christmas
stockings (7 in. Opening 5 inch name without cutting stocking
5.7” x 5.2” Radius this frame is allows you to sew the
backs of caps, sides of caps, bucket caps, cuffs of sleeves,
collar tips, ribbons etc. The notches cut in the frame provide line up points and the radius fits the curve of the cap.
4.5” X 11” Was designed for embroidery down sleeves and pant
legs. It is also used for sewing in-between button holes and
across the collar of a button down shirt.
Pocket’s
2” x 4”
2½” x 4”
3” x 4”
4” x 4”
5” x 4”
7” x 5”
7” x 8”
10 1/2 ” X 12”
Medium Talls
Sleeve’s
3” X 11”
4 ½ X 11”
Large’s
14” X 6.5” and 18” X 6.5” depends on machine
Medium’s
9” X 6 ½”
10 1/2 ” X 6 1/2”
Jumbo’s
WE MAKE CUSTOM SIZE HOOPS DAILY
IF YOU DON’T SEE WHAT YOU NEED
CALL US WE CAN MAKE YOUR SIZE
14” X 12” and 18” X 12” depends on machine
MACHINE TYPES WE MANUFACTURE FOR
BABY LOCK PRO
Melco EMC
Voyager
AEMCO
Barudan junior
Melco EMT
INBRO
Melco EMB
Meistergram side mount
Meistergram back mount
Barudan520
Barudan520 EQ
Barudan380
Barudan380 EQ
Brother
Brother PR600
Happy 14”
Melco Amaya
SWF 14”
SWF 15 1/2”
SWF 19 5/8”
Tajima
Tajima NEO
Happy 20 1/4”
Prodigy
Generations
Renaissance
Vital Link
Toyota 820/830
Janome MB4
Toyota 850/860
Ricoma
Happy 17 1/2”
Happy 19 1/2”
ZSK
ZSK Wide
Toyota 9000
The Original
ADD On’s
INC.
1.5x4”
7x8” deep bag
3x11” sleeve
2” radius
2.5x7”sock
7x11” deep bag
2.5x9” sock
3” radius
2.5x11” sock
11x7”
deep bag
1.5x4” glove
4x4” pocket
5x5” pocket
2x4” glove
12X12”
deep bag
4x8” pocket
CUSTOM SIZE
3x4” glove
X
3.5x6”
CUSTOM
Thin radius
The Original
INC.
PR600/ BABY LOCK PRO
JUST SLIDE LEFT ARM OUT TO WIDEST HOOP SIZE AND YOU ARE READY TO SEW
THIS SET COMES WITH:
THE ARM FOR YOUR MACHINE TYPE
2 X 4 MONO HOOP
2.5 X 4 POCKET HOOP
3 X 4 POCKET HOOP
5 X 4 CHRISTMAS STOCKING HOOP
6” RADIUS HAT HOOP
FOR SIDES AND BACKS OF HATS
7 X 5 ATTACHE CASE HOOP
7 X 7 BAG HOOP
7 IN 1 LT
- change
2.0” MONO The mono is used on woven (non-stretch ) fabric
The pocket opening must be a minimum of 5 inches. The bobbin arm needs to fit into the pocket and still have room to
7.0” x 5” The wider frame is used on larger bag pockets and
travel. Also used on Socks fanny packs, Cd cases, handy for
flaps. It allows you to do many of the same items as the 5 x 4
non-hoopable items.
The wider frame is used on larger bag pockets and
it allows a larger logo when a bigger sew field is available.
2.5” POCKET The 2.5 is used for many items listed above
it may be used on woven or stretch. (woven must have a 5
1/2 in. opening) When sewing matching men and women’s
garments. The ladies size may have a smaller pocket opening it may require this size and the 3’ for the mans pocket.
3.0” POCKET The pocket hoop is used on pockets that
have stretch (knit or jersey) The stretch allows room for the
bobbin case to fit in the pocket with room for movement.
Also good for drill team socks, short sleeves, Cd cases,
5.0” x 4.0” Comp The comp is used on various material types.
Such as leather, canvas nylon and velvet. It leaves no hoop burn.
Use on bag pockets, flaps, short sleeve shirts and Christmas
stockings (7 in. Opening 5 inch name without cutting stocking
5.7” x 5.2” Radius this frame is allows you to sew the
backs of caps, sides of caps, bucket caps, cuffs of sleeves,
collar tips, ribbons etc. The notches cut in the frame provide line up points and the radius fits the curve of the cap.
7.” x 7.” The wider frame is used on larger bag pockets and
flaps. It allows you to do many of the same items as the 7 x 5
it allows a larger logo when a bigger sew field is available.
The Original
INC.
SEW WHERE YOU HAVE NEVER SEWN BEFORE
Does your new embroidery machine need to get off the desk and
get a little more mobile?
Our Machine stand is all metal construction with a 23” wide by
21” deep table top, with matching lower shelf for storage of your
cap driver and extra hoops. It also comes with a T-bat to mount
your cap hooping devise. The sturdy casters and leveling screws
can hold up to 500 pounds. Once moved to the location you want
just turn down the leveling screws and your ready to embroider.
During assembly choose the height that best suits you. If you are
in a wheel chair or 6’10” our stand can be adjusted from 26” to
44” tall
T-bar assembly
Beautiful Powder Coat finish
Stand can adjust from 26” to 44” tall
We have many other attachments options for the table. Racks for hoops, Foot
pedal attachment for hands free hat hooping, Storage Drawers, Solid top and extra shelves.
The Original
SECURITY LOCKS ALL 4 SIDES
INC.
SEW WHERE YOU HAVE NEVER SEWN BEFORE
RATED 500 POUND ROLLER WHEELS
PR600/ BABYLOCK PRO
TRAVEL CASE
RAISED FOOT SUPPORT
PULLOUT HANDLE FOR EASY HANDLING
Heavy duty tie down strap to keep machine in
place.
Special rounded handle molded into base for easy
lifting.
YOU CAN LEAVE MACHINE IN CASE FOR
MOST EMBROIDERY OPERATIONS.
The Original
INC.
SEW WHERE YOU HAVE NEVER SEWN BEFORE
PR600/ BABYLOCK PRO Table Top
This is great for horse blankets, quilting, towels anything heavy that would need support
You can put it on in less then a minute