Le centraline elettroniche montate oggi su tutte le autovetture

Comments

Transcription

Le centraline elettroniche montate oggi su tutte le autovetture
GALEP-5 user guide
GALEP-5 Device Programmer
http://www.alientechsales.co.uk
http://www.quantumtuning.co.uk
Alientech srl
electronic performance
1
GALEP-5 user guide
GALEP-5 Device Programmer
Introducing to GALEP-5
GALEP-5 is a universal programmer for electronic devices, the fastest and most compact in its
class, a perfect example of technology ease to use, with a list of more than 15,000 devices
supported.
Technology
GALEP-5 is specifically designed to be of a very simple and speedy use. GALEP-5 has an
internal 200 MIPS ARM-9 microprocessor operated by Linux Embedded operating system,
which processes programming algorithms.
Pins management is carried out by a FPGA (user-programmable logic) that through a software
solution allows to program devices not otherwise usable.
La gestione dei pin e’ pilotata da una FPGA (user-programmable logic) che permette,
attraverso una soluzione puramente software, di programmare dispositivi che altrimenti non
sarebbero utilizzabili.
Using the programmer
Connect GALEP-5 to your PC through the USB cable supplied in the kit. The white LED will blink
and then stay permanently on. Wait a few seconds until also the red LED is light up. Now you
can start up GALEP5 software.
Main window of GALEP5 software
Alientech srl
electronic performance
2
GALEP-5 user guide
GALEP-5 Device Programmer
How to select a component
You can access the Components Selection window in three different ways:
-
By clicking on “Device Action” and then on “Device”
By clicking on the tab “Devices” in the lower left
By pressing the “F8” key on your keyboard
Now a complete list of components sorted by type (EPROM,
EEPROM, FLASH, MCU, etc.) is at your disposal. By clicking on
the flag “Show Manufacturer first” you can have the list sorted
by manufacturer (ACT, ACTRANS, etc.). This flag is just below
the list of components (see the detail in the picture beside to
identify it) .
How to work on the component
After having choose the component you can proceed with the
usual operations on the device. For the reading procedure you
simply have to press the “F6” key on your keyboard, or click the “Read F6” button on the lower
left of the software window or open the “Device Action” Menu and click on “Read”. A window
for the management of the components will be shown, representing the device inserted in the
programmer. Just click on the “Start” button to start the reading.
For the writing procedure you must first of all upload the file to edit into the buffer of the
device, by clicking on “File” and then on “Load”. Once the file is uploaded, you can simply write
it by pressing the “F3” key on your keyboard, or by clicking on the “Program F3” button in the
bottom left of the software window, or by opening the “Device Action” menu and clicking on
“Program”. A window for the management of the components will be shown, representing the
device inserted in the programmer. Just click on the “Start” button to start the editing.
Management Device window before programming
Alientech srl
electronic performance
3
GALEP-5 user guide
GALEP-5 Device Programmer
Techincal features
Pocket size: 80 x 115 x 33 mm approx.(+7mm socket)
Weight: 185 g approx.
Socket 48-pin ZIF with 48 universal pin drivers
Component Programming at low voltage up to 1,2 V
USB 2.0 high-speed interface
AC Adaptor and battery compartment for high-powered components
200 MIPS ARM-9 RISC microprocessor with 64 MB of RAM and 8 MB Flash
FPGA (50K gates, 64Kb RAM)
3 linear voltage regulators for internal power supply
4 switching regulators for programming voltage
2 linear voltage regulators for logic levels and input thresholds
2 Microcontrollers to monitoring internal tensions
D/A 8-channel converter, A/D 16-channel converter
Embedded Linux 2.6 inside
The kit contains:
GALEP-5 device
USB cable
AC adaptor for external supply
CD with software and user’s handbook
Important!
For those components which do not absorb more than 500 mA the adaptor for external supply
is no required (supplied in the kit), furthermore there is no need to use batteries to carry out
the operations on the components.
Alientech srl
electronic performance
4
GALEP-5 user guide
GALEP-5 Device Programmer
Alientech s.r.l.
electronic performance
Email: [email protected]
Alientech srl
electronic performance
5

Similar documents