Service Center Network (SCN)

MAINTENANCE • REPAIR • OVERHAUL
Service Center Network (SCN)
Vector Aerospace Engine Services Atlantic Service Center Network and Mobile Repair Teams (MRT)
Engine Services - Brisbane, Vector Aerospace Engine Services - Atlantic’s engine repair and overhaul facility located in Brisbane,
Australia, features a highly dedicated and experienced Mobile Repair Team (MRT) which operates throughout the Asia Pacific region.
This team, which is led by Mr. Matthew Veitch, has extensive experience working on Pratt & Whitney Canada engines and operates
on a rapid dispatch basis where AOG response is part of their daily routine. The team is always “travel ready” and maintains an
extensive list of specialized tooling to carry out a great number of repairs in the field. The aim of this team is to keep engines on-wing
and reduce operator costs associated with maintenance.
Vector Aerospace is fully approved by Pratt & Whitney Canada as a DOF. Thus by using Engine Services - Brisbane, your labour,
parts replacement and component repair costs will be reduced by the application of Pratt & Whitney Canada’s various commercial
support programs applicable to your engine type. Pratt & Whitney Canada limits the right to claim commercial support campaigns to
its approved shops only. We are the only Pratt & Whitney Canada Designated PT6A overhaul shop in Australia. Dealing with a Pratt
& Whitney Canada approved facility has further advantages such as maintained access to all applicable Pratt & Whitney Canada
warranty policies.
More than 20 years of specialization in the repair and overhaul of Pratt & Whitney Canada products has earned Engine Services Atlantic’ industry leader status. This has been accomplished by providing high quality engine repairs, excellent customer service,
and superior warranty coverage. Above all of that, Engine Services - Atlantic boasts the fastest turn-around times in the industry, and
excellent service at a competitive price.
Contact Us
Engine Services Atlantic - SCN (Brisbane)
Tel: +61 (7) 3268 0000 I AOG Tel: +1.902.888.1887
Email: [email protected]
Vector Aerospace Engine Services - Atlantic Locations
Summerside | Prince Edward Island, Canada | Tel: +1.902.436.1333
Atlanta | Georgia, USA | Tel: +1.770.427.2428 Pittsburgh | Pennsylvania, USA | Tel: +1.724.532.5951
Johannesburg | Lanseria, South Africa | Tel: +27.22.701.3035
Singapore | Seletar, Singapore | Tel: +1.65.6592.7299
S E T T I N G T H E S TA N D A R D O F C U S T O M E R S E R V I C E
Calgary | Alberta, Canada | Tel: +1.403.295.4204
Dallas | Texas, USA | Tel: +1.817.416.7926
Brisbane | Brisbane, Australia | Tel: +61 (7) 3268 0000
Nairobi | Nairobi, Kenya | Tel: +254.713.900.271
W W W. V E C T O R A E R O S PA C E . C O M
PT6A Series
• Field service engine repair’s throughout Asia - Pacific Region
• A.G.B repairs (including replacement of starter and accessory gears)
• Hot section inspection (on-wing) and training
• L.C.F change (replacement of life limited parts)
• Borescope inspection
• Service bulletin and AD Compliance
• Blend repairs 1st stage compressor (on-wing)
• Full overhaul and repair support (Vector - Brisbane, Australia)
• Power section repairs (including exhaust duct replacement)
PT6T Series
• Field service engine repair’s throughout Asia - Pacific Region
• A.G.B repairs (including replacement of starter and accessory gears)
• Hot section inspection
• Blend repairs 1st stage compressor (on-wing)
• Power section repairs (including exhaust duct replacement)
• L.C.F change (replacement of life limited parts)
• Service bulletin and AD compliance
• Borescope inspection
• On-wing 2500hr inspection (using exchanged, overhauled clutch
assemblies)
• Oil transfer repairs
PW100 Series
• Field service engine repair’s throughout Asia - Pacific Region
• Borescope inspection
• Hot section inspection repairs on-site (excluding PW127 models)
• L.C.F change (replacement of life limited parts)
• L.P vane replacement
• P.T 1st and 2nd stage stator replacement
• H.P vane segment replacement
• Interstage case #6 and #7 brg. repairs
• Blend repairs L.P impeller (on-wing)
• Outer and inner combustion chamber liner replacement
• Accessory gearbox carbon seal front and rear replacement
• Stud replacement and repairs
• Engine removal and installation (assistance only)
• Engine troubleshooting
• Stud replacement and repairs
• Engine troubleshooting
• Reduction gearbox accessory gear and cover replacement
• Removal/installation of reduction gearbox
• H.P stubshaft and bolt replacement
• Stud replacement and repairs
• Service bulletin and AD compliance
• Engine troubleshooting
JT15D Series
• Field service engine repair’s throughout Asia - Pacific Region
• Hot section inspection (on-wing)
• Borescope inspection
• Fan and booster repairs, F.O.D (on-wing)
• Fan blade replacement
• L.C.F change (replacement of life limited parts)
• A.G.B repairs
• Service bulletin and AD compliance
• Engine troubleshooting
PW300 Series
• Field service engine repair’s throughout Asia - Pacific Region
• Borescope inspection
• Fan blade replacement
• Fan trim balancing
• Service bulletin and AD compliance
• A.G.B repairs
• Engine troubleshooting
S E T T I N G T H E S TA N D A R D O F C U S TO M E R S E RV I C E
S E T T I N G T H E S TA N D A R D O F C U S T O M E R S E R V I C E
Locations:
Engine Services - Brisbane: PT6A / PT6T / JT15D /
PW100 / PW300
30 Industry Court, Eagle Farm, Bribane, QLD 4009
Tel: +61 (7) 3268 0000 I Fax: +61 (7) 3268 0029
Matthew Dennington - General Manager
Email: [email protected]
Tel: +61 (7) 3268 0007 I Mobile: +61 (0) 437 017 46
Matthew Veitch - Lead Mobile Repair Technician
Email: [email protected]
Tel: +61 (7) 3268 0002 I Mobile: +61 (0) 409 051 227
Simon Atherley - Mobile Repair Technician
Email: [email protected]
Tel: +61 (7) 3268 0015 I Mobile: +61 (0) 499 488 399
Nick Mears - Mobile Repair Technician
Email: [email protected]
Tel: +61 (7) 3268 0005 I Mobile: +61 (0) 499 499 040
WWW.VECTORAEROSPACE.COM
W W W. V E C T O R A E R O S PA C E . C O M