2016 torches and consumables

Comments

Transcription

2016 torches and consumables
2016 torches and consumables
Plasma
Contents
Plasma
Page
Replacement parts suitable for these product lines
®
147 CENTRICUT SE200
®
System/Torch
MAX200®
148 CENTRICUT SE2000®
HT2000®
149 ESAB® PT-31/PT-31XL
PCM®-VPi, PCM-SMi, PCM-500i, PCM-625i, PCM-50A,
PCM-875 and PCM‑1125
150 ESAB PT-20AM®
PCM-100, PCM-875, PCM-1125 and ESP®-100i
151 ESAB PT-24
Precision Plasmarc®
152 ESAB PT-15/PT-15XL Nitrogen
ESP-300, ESP-400, ESP-600 and ESP-1000
153 ESAB PT-15XL Oxygen
ESP-300, ESP-400, ESP-600 and ESP-1000
154 ESAB PT-15/PT-15XL Nozzle components
ESP-300, ESP-400, ESP-600 and ESP-1000
155 ESAB PT-19XL
ESP-200/300/400/600C/1000, PCM-150/1500
156 ESAB PT-19XL+S
ESP-200/300/400/600C/1000, PCM-150/1500
157 ESAB PT-19XLS
ESP-200/300/400/600C/1000, PCM-150/1500
159 ESAB PT-600
ESP-200/300/400/600C/1000, PCM-150/1500
162 ESAB PT-600 and PT-19XLS heavy duty
ESP-200/300/400/600c/1000, PCM-150/1500
166 XP3 for ESAB PT-600 and PT-19XLS
ESP-200/300/400/600c/1000, PCM-150/1500
170 ESAB PT-36 (m3 system)
ESP-200/300/400/600C/1000, EPP-200, 360
172 KALIBURN® FineLine™200
FineLine200PC and 150PC
173 KALIBURN SR-45i®
SR-45i
174 KALIBURN SR-45i Retrofit
SR-45i
176 KALIBURN Spirit®, Spirit II®, and ProLine®
Spirit 150a, 200a, 275a, 400a , Spirit II 150, 275, 400,
ProLine 2150, 2200, 2260
178 KJELLBERG® HiFocus 100®
PerCut 101®
179 KJELLBERG HiFocus 130/160i
PerCut 160/170
181 KJELLBERG HiFocus 130/160i/161i
PerCut 210M
184 KJELLBERG HiFocus 280i/360i/440i
PerCut 370.1
185 KJELLBERG HiFocus 280i/360i/440i
PerCut 370.2
187 KJELLBERG HiFocus 280i/360i/440i
PerCut 450M
189 KJELLBERG FineFocus 800® Plus
PB-S80
190 KJELLBERG FineFocus 800, 900, PA-S70, PA-S75
PB-S70/75/77
®
191 KOIKE Super-400 Plus
®
®
Super-400 Plus
192 KOMATSU Rasor 40 amp
Rasor 40 amp
193 KOMATSU Rasor 90/120 amp
Rasor 90/120 amp
194 KOMATSU Rasor 300 amp
Rasor 300 amp
195 THERMAL DYNAMICS PCH/M-150
PAK 15XC, MERLIN®
196 THERMAL DYNAMICS Maximizer 300
MERLIN 3000, 6000, 6000GST
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
iiwww.hypertherm.com/centricut/plasma
Plasma technology enhancements
Hypertherm® technology and quality drive superior performance
of Centricut® consumables. Cut with confidence, it’s Hypertherm.
• Slows wear
CoolFlow™ nozzle technology
• Maintains orifice shape and size
• Maximizes usage
• Reduces torch leaking
• Extends electrode life
• Extends nozzle life and improves cut quality
SilverLine® electrode technology
Through the use of solid state welding technology and
optimized coolant flow, SilverLine technology slows the
wear of hafnium, the material which produces the plasma
arc, by more efficiently removing heat from the electrode.
By maximizing the silver-hafnium interface and optimizing the
geometry of the silver, Centricut SilverLine electrodes can
be used 25 to 300% longer than other silver-copper and
all-copper electrodes.
Every plasma operator will tell you that the most common
nozzle failure is when the orifice goes out of round.
Maintaining nozzle orifice shape and size directly impacts
nozzle life and cut quality. CoolFlow technology utilizes
improved cooling features and optimizes coolant flow to
preserve orifice size and shape longer than any other nozzle
available. O-ring placement on CoolFlow nozzles reduces
torch leaking which can cause consumable and torch failure.
Backed by Hypertherm technology, product quality and world-class customer support,
Centricut plasma consumables deliver reliability to your process at a lower cost.
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
2www.hypertherm.com/centricut/plasma
Plasma technology advantage
OEM
ESAB®
Torch
Systems
Technology
Advantage
PT-36, PT-36R
M3, EPP, ESP
SilverLine electrode
Up to 2 times life
CoolFlow™ nozzle
Up to 2 times life
PT-24
Precision Plasmarc
SilverLine® electrode
Up to 2 times life
PT-15XL
PCM and ESP
SilverLine® electrode
Up to 2 times life
PT-19XL
PCM and ESP
SilverLine® electrode
Up to 2 times life of XL
PT-19XLS
PCM and ESP
SilverLine® electrode
Up to 2 times life of XL
PT-600
Heavy duty for PT-600 and
PT-19XLS
PCM and ESP
SilverLine® electrode
Up to 2 times life of XL
PCM and ESP
SilverLine® electrode
Up to 30% longer life
CoolFlow™ nozzle
Compared to UL
SilverLine® electrode
Up to 2 times life
CoolFlow™ nozzle
25% faster cutting
MultiPort shield
Improved cut quality
XP3 for PT-600 and PT-19XLS PCM and ESP
Kaliburn®
FineLine 200
FineLine 150PC, 200PC
SilverLine® electrode
Up to 2 times life
ProLine
ProLine 2150, 2200, 2260
SilverLine® electrode
Up to 2 times life
CoolFlow™ nozzle
Improved cut quality
SilverLine® electrode
Up to 3 times life
CoolFlow™ nozzle
Improved cut quality
SilverLine® electrode
Up to 3 times life
CoolFlow™ nozzle
Improved cut quality
SilverLine electrode
Price and quality
CoolFlow nozzle
Price and quality
SilverLine electrode
Price and quality
CoolFlow nozzle
Price and quality
Spirit
Spirit 150a, 200a, 275a, 400a
Spirit II
Spirit 150, 275, 400
PB-S70/75/77
PA-S70,S75, FineFocus
800,900
PerCut 210M
HiFocus 130/160i/161i
PerCut 101
HiFocus 100
SilverLine electrode
Price and quality
PerCut 160/170
HiFocus 130/160i
SilverLine electrode
Price and quality
FineFocus 800 Plus
SilverLine electrode
25% longer life
CoolFlow nozzle
25% longer life
Kjellberg® PB-S80
PerCut 370.1
HiFocus 280i/360i/440i
SilverLine electrode
Price and quality
PerCut 370.2
HiFocus 280i/360i/440i
SilverLine electrode
25% longer life
CoolFlow nozzle
25% longer life
SilverLine electrode
Price and quality
CoolFlow nozzle
Price and quality
SilverLine® electrode
Up to 1.5 times life
CoolFlow™ nozzle
Up to 1.5 times life
Rasor 40
CoolFlow™ nozzle
40% life increase
Rasor 90/120
SilverLine® electrode
Up to 2 times life
Rasor 90/120
CoolFlow™ nozzle
Up to 2 times life
PerCut 450M
Koike®
®
Super-400 Plus
Rasor 40
Komatsu® Rasor 90/120
HiFocus 280i/360i/440i
Super-400 Plus
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
3www.hypertherm.com/centricut/plasma
Centricut® SE200®
System: MAX200®
Consumables
Centricut
part number
1
2
3
4
C61-280
C61-281
C61-270
C92-230
C61-273
5 C61-207
C61-263
C61-232
6 C61-227
7 C61-265
C61-241
Reference
number
Description
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Shield, ported, dry/underwater*, 200 amp
Shield, ported, dry/underwater*, 100 amp
Retaining ring, heavy duty
Retaining cap
Retaining ring, HD with IHS tab
Nozzle, Air/N2/ArH2, 200 amp
Nozzle, Air, 40 amp
Nozzle, Air, 100 amp
Gas guide, Air/N2/ArH2
Electrode, SuperPierce, Air
Electrode, N2, ArH2
Reference
number
Description
N/A
N/A
N/A
N/A
N/A
N/A
Water tube
Water tube wrench
Torch body, with water tube and wrench
Torch body o-ring
Gas guide o-ring
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
*Use with C61-270
Maintenance items
Centricut
part number
9
8 C92-228
C92-229
9 C61-213
C66-023
C27-134
027055
Pkg
qty
1
1
1
5
5
1
8
7
6
5
4
1
3
2
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
4www.hypertherm.com/centricut/plasma
Centricut® SE2000®
System: HT2000®
Consumables
Centricut
part number
1
2
3
4
C61-280
C61-281
C61-270
C92-230
C61-273
5 C61-207
C61-263
C61-232
6 C61-227
C61-265
7 C61-241
Reference
number
Description
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Shield, ported, dry/underwater*, 200 amp
Shield, ported, dry/underwater*, 100 amp
Retaining ring, heavy duty
Retaining cap
Retaining ring, HD with IHS tab
Nozzle, Air/N2/ArH2, 200 amp
Nozzle, Air, 40 amp
Nozzle, Air, 100 amp
Gas guide, Air/N2/ArH2
Electrode, Air, 200 amp
Electrode, N2, ArH2
Reference
number
Description
N/A
N/A
N/A
N/A
N/A
N/A
Water tube
Water tube wrench
Torch body, with water tube and wrench
Torch body o-ring
Gas guide o-ring
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
*Use with C61-270
Maintenance items
Centricut
part number
8 C92-228
C92-229
9 C61-213
C66-023
C27-134
027055
9
Pkg
qty
1
1
1
5
5
1
8
7
6
5
4
1
3
2
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
5www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
ESAB® PT-31®/PT-31XL®
System: PCM®-VPi, PCM-SMi, PCM-500i, PCM-625i, PCM-50A, PCM-875 and PCM-1125
Consumables
Centricut
part number
3
2
1
Reference
number
Description
19682
21008
20861
20463
18785
19683
18205
20862
20282
Tip, XL, 30 amp
Tip, extended, 40 amp
Tip, extended, 50 amp
Swirl baffle, XL, 6 holes
Swirl baffle, 4 holes
Electrode, XL
Electrode
Electrode, extended
Heat shield, XL
Centricut
part number
Reference
number
Description
027055
N/A
Lubricant .25 oz. (7 ml) tube
1 C31-682
C31-008
C31-861
2 C31-463
C31-785
3 C31-683
C31-205
C31-862
L31-282
Pkg
qty
10
10
10
1
1
5
5
10
1
Maintenance items
Pkg
qty
1
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
6www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
ESAB® PT-20AM®
System: PCM®-100, PCM-875, PCM-1125 and ESP®-100i
Consumables
Centricut
part number
1 L39-447
L39-326
2 C39-330*
C39-329*
C39-328*
3 C39-150*
4 L39-373
L39-374
5 L39-332
Reference
number
Description
21447
21326
21330
21329
21328
21150
21373
21374
21332
Heat shield, 50 amp
Heat shield, 70–100 amp
Nozzle, 50 amp
Nozzle, 70 amp
Nozzle, 100 amp
Electrode
Insulator
Baffle tube
Electrode holder assembly (includes L39-374)
Reference
number
Description
21359
N/A
PT-20AM torch body assembly
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
5
5
5
5
1
1
1
Maintenance items
6
Centricut
part number
6 L39-359
027055
Pkg
qty
1
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
5
4
3
2
1
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
7www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
ESAB® PT-24®
System: Precision Plasmarc®
Consumables
Centricut
part number
9
8
7*
1 C70-531*
C70-931
2 C70-712
3 C70-010
4 C70-007
5 L70-540
L70-541
C70-542
C70-543
C70-923
6 L70-852
L70-536
C70-692
7 C70-1039*
Reference
number
Description
22531
N/A
21712
22010
22007
21540
21541
21542
21543
21923
21852
21536
21692
21539
Shield, one piece with IHS tab
Shield without tab
Shield retainer insulator with o-ring
Shield cup insulator
Nozzle retainer diffuser
Nozzle A, 15 amp
Nozzle B, 30 amp
Nozzle C, 50 amp
Nozzle D, 70 amp
Nozzle E, 100 amp
Swirl baffle, 15 amp
Swirl baffle, 30 amp
Swirl baffle, 50–100 amp
SilverLine® electrode
Reference
number
Description
950714
638797
86W62
21725
21758
N/A
O-ring
O-ring
O-ring
Water baffle
Torch body
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
1
1
1
1
1
5
5
5
1
1
1
1
Maintenance items
6
Centricut
part number
L70-714
L70-797
L70-W62
8 L70-725
9 L70-758
027055
5
4
Pkg
qty
1
5
1
1
1
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
3
2
1*
Hypertherm technology –
SilverLine electrodes
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
8www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
ESAB® PT-15®/PT-15XL® Nitrogen
System: ESP®-300, ESP-400, ESP-600 and ESP-1000
Consumables
Centricut
part number
8
1 C10-759
C10-758
C10-230
2 C10-691*
C10-611
C10-614
C10-612
C10-615
C10-613
C10-690
L10-587
C10-318
C10-319
3 C10-586
C10-142
C10-341
C10-360
4 C10-236*
Reference
number
Description
20759
20758
996230
2075691
2075611
2075614
2075612
2075615
2075613
2075690
2075587
N/A
N/A
2075586
948142
2075341
2075360
600236
Nozzle retaining cap, PT-15XL
Nozzle retaining cap, bevel, PT-15XL
Nozzle retaining cap, PT-15
Nozzle assembly, N2, .125, 250 amp
Nozzle assembly, N2, .156, 400 amp
Nozzle assembly, N2, .156, reverse swirl
Nozzle assembly, N2, .200, 600 amp
Nozzle assembly, N2, .200, reverse swirl
Nozzle assembly, N2, .230, 750 amp
Nozzle assembly, N2, .230, reverse swirl
Nozzle assembly, N2, .250, 875–1000 amp
Nozzle base, 125 amp, PT-15XL
Nozzle insulator, 125 amp, PT-15XL
Gas baffle, ceramic, 8 x .067, 260 amp
Gas baffle, ceramic, 4 hole, 100–280 amp
Gas baffle, poly, 4 hole
Gas baffle, poly, reverse swirl, 4 hole
Electrode tip, N2
Reference
number
Description
2075343
21940
20403
20755
996232
20754
19483
N/A
37110
N/A
Electrode tip holder, N2
Contact ring assembly
PA bus insulator
Insulator body with o-ring, PT-15XL
Insulator body with o-ring, PT-15
Torch body, PT-15XL
Double threaded mounting tube
O-ring kit, insulator body
Electrode holder – removal tool
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
7
Maintenance items
Centricut
part number
6
5 C10-343
6 C10-940
C10-403
7 C10-755
C10-232
8 C10-754
C10-483
C10-932
L47-110
027055
5
4*
Pkg
qty
1
1
1
1
1
1
1
1
1
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
3
2*
1
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
9www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
ESAB® PT-15XL® Oxygen
System: ESP®-300, ESP-400, ESP-600 and ESP-1000
Consumables
Centricut
part number
1 C10-758
2 C10-759
C10-262
C10-063
C10-317
C10-318
C10-661
C10-319
3 C10-751
C10-962
C10-662
C10-664
C10-665
4 C10-1063*
C47-1096*
5 C10-1066*
C10-763*
7 C10-586
C10-142
L47-143
C10-660
C122-530R
10
9
8
Description
20758
20759
21962
21963
37317
N/A
N/A
N/A
20751
35662
35662
35664
35665
20763
34086
35666
20763
2075586
948142
948143
35660
0558002530R, 35661
Nozzle retaining cap, bevel, PT-15XL
Nozzle retaining cap, PT-15XL
Nozzle, 300 amp, bevel
Nozzle, 300 amp, reverse bevel
Nozzle, 125 amp, PT-15XL (use with C10-142 and C10-1066)
Nozzle base, 125 amp, PT-15XL
Nozzle base, O2, 300 amp
Nozzle insulator, 125 amp, PT-15XL
Nozzle, O2, 260 amp
Nozzle, O2, 300 amp
Nozzle, O2, 300 amp (replaceable ceramic)
Nozzle, O2, 340–360 amp
Nozzle, O2, 340–360 amp, reverse
SilverLine® electrode, 260 amp
SilverLine electrode, 50–250 amp, bevel
SilverLine electrode, 300–360 amp
Electrode, O2
Gas baffle, ceramic, 8 x .067, 260 amp
Gas baffle, 4 x .032, 50–200 amp
Gas baffle, 4 x .032, 50–200 amp, reverse
Gas baffle, 8 hole, standard, 300–600 amp
Gas baffle, 8 X .047, 250–600 amp reverse
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maintenance items
Centricut
part number
7
6 C10-398
C47-084
C10-403
8 C10-940
9 C10-755
C10-242
10 C10-754
C10-483
C10-932
L10-630
C10-W99
C10-W85
C10-526
C10-527
C10-528
C10-106
L47-110
L10-568
L10-4775
027055
6
4
Reference
number
5
3
Reference
number
Description
20398
34084
20403
21940
20755
996242
20754
19483
N/A
999630
86W99
86W85
996526
996527
996528
2064106
37110
996568
34775
N/A
Electrode holder, O2
Electrode holder, bevel
PA bus insulator
Contact ring assembly
Insulator body with o-ring kit
Locating pin
Torch body
Double threaded mounting tube
O-ring kit, insulator body
Electrode holder removal tool
O-ring, electrode holder
O-ring, insulator body, center
O-ring, insulator body, small
O-ring, inside insulator body, front
O-ring, outside insulator body and torch
O-ring, insulator body, rear edge, red
Electrode holder – removal tool
Electrode nut driver
Power cable, 4.5 ft.
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
1
1
1
1
1
1
1
1
5
5
5
5
5
5
1
1
1
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
Hypertherm technology –
1
2
SilverLine electrodes
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
10www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
ESAB® PT-15®/PT-15XL® Nozzle components
System: ESP®-300, ESP-400, ESP-600 and ESP-1000
Consumables
Centricut
part number
1 C10-628
2 C10-693
C10-617
C10-606
C10-607
3 C10-619
4 C10-618
5 C10-584
C10-616
6 C10-694
C10-608
C10-609
C10-610
6
5
Reference
number
Description
996628
2075693
2075617
2075606
2075607
996619
996618
2075584
2075616
2075694
2075608
2075609
2075610
Gasket
Insulator, .140
Insulator, .180
Insulator, .225
Insulator, .260
Spacer
Centering sleeve
Water swirl ring, standard
Water swirl ring, reverse
Nozzle base, .125
Nozzle base, .156
Nozzle base, .200
Nozzle base, .230
Pkg
qty
5
5
5
5
5
5
5
5
5
5
5
5
5
4
3
2
1
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
11www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
ESAB® PT-19XL®
System: ESP®-200/300/400/600C/1000, PCM®-150/1500
Consumables
Centricut
part number
1 C47-186
2 L47-085
L47-982
3 C47-026
4 C47-029
C47-030
C47-031
C47-922
C47-985
C47-995
5 C47-822
C47-885
C47-195
C47-027
6 C47-028
7 C47-1096*
8 C47-1086*
C47-996
9 C47-084
10 C47-142
L47-143
C47-586
11 C10-660
14
13
12
11
9
7
8
5
6
3
Description
948186
34085
21982
22026
22029
22030
22031
22032
22034
22033
21822
35885
22195
22027
22028
34086
35886
34086
34084
948142
948143
2075586
35660
Heat shield, std, 100–360 amp
Nozzle retaining cap
Nozzle retaining cap
Nozzle tip, .041, 50 amp
Nozzle tip, .071, 100 amp
Nozzle tip, .082, 150 amp
Nozzle tip, .091, 200 amp
Nozzle tip, 250 amp
Nozzle tip, 360 amp
Nozzle tip, 400 amp
Nozzle, .099, 250 amp
Nozzle, .120, 360 amp
Nozzle, .130, 400 amp
Nozzle base, 50 amp
Nozzle base, 100–400 amp
SilverLine® electrode, 250 amp
SilverLine electrode, 360 amp
Electrode, CopperLine®, 250 amp
Electrode holder
Gas swirl baffle, 4 hole, standard, 100–280 amp
Gas baffle, 4 x .032, 50–200 amp, reverse
Gas swirl baffle, 8 hole, standard, 260 amp
Gas swirl baffle, 8 hole, standard, 300–600 amp
Reference
number
Description
21940
20403
20434
20391
37110
85W10
86W99
996528
N/A
2064106
86W85
996526
19483
34775
996568
181W89
N/A
Contact ring assembly
PA bus insulator
Insulator assembly
PT-19XL torch body
Electrode holder – removal tool
O-ring, rear insulator
O-ring, electrode holder
O-ring, outside insulator body and torch
O-ring kit, insulator body
O-ring, insulator body rear edge, red
O-ring, insulator body center
O-ring, insulator body small
Double threaded mounting tube
Power cable, 4.5 ft.
Electrode removal tool
O-ring, nozzle
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maintenance items
Centricut
part number
10
Reference
number
4
12 C47-940
C10-403
13 C47-434
14 C47-391*
L47-110
C14-793
C10-W99
C47-528
C47-999
C10-106
C47-W85
C47-526
C10-483
L10-4775
L10-568
C47-006
027055
Pkg
qty
1
1
1
1
1
3
5
5
1
5
5
5
1
1
1
5
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
2
1
Hypertherm technology –
SilverLine electrodes
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
12www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
ESAB® PT-19XL+S®
System: ESP®-200/300/400/600C/1000, PCM®-150/1500
Consumables
Centricut
part number
6
4
2
5
1 L47-801
2 L47-795
3 C47-802
C47-945
4 L47-796
5 C47-944
6 L47-982
Reference
number
Description
21801
21795
21802
21945
21796
21944
21982
Shield retainer assembly
Shield, 50 amp
Shield, 100–250 amp
Shield, 300–400 amp
Diffuser, 50 amp
Diffuser, 100–600 amp
Nozzle retaining cap
Pkg
qty
1
5
1
1
1
1
1
See PT-19XL (page 12) for remaining consumables for the PT-19XL+S.
3
1
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
13www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
ESAB® PT-19XLS®
System: ESP®-200/300/400/600C/1000, PCM®-150/1500
Consumables
Centricut
part number
14
13
10
11
12
8
9
6
1 C47-081
2 L47-795
3 C47-802
C47-945
4 L47-796
5 C47-944
C47-496
6 C122-082
7 C47-082
L47-431
8 C47-026
9 C47-029
C47-030
C47-031
C47-922
C47-985
C47-995
10 C47-027
11 C47-028
12 C47-822
C47-885
C47-195
13 C47-1096
14 C47-1086
C47-996
L47-403
Reference
number
Description
37081
21795
21802
21945
21796
21944
22496
N/A
37082
37431
22026
22029
22030
22031
22032
22034
22033
22027
22028
21822
35885
22195
34086
35886
34086
22403
Shield retainer, copper
Shield, 50 amp
Shield, 100–250 amp
Shield, 325–600 amp
Diffuser, 50 amp
Diffuser, 100–600 amp
Diffuser, 100–600 amp, reverse
Nozzle retaining cap, quick-change
Nozzle retaining cap
Nozzle retaining cap, air curtain
Nozzle tip, .041, 50 amp
Nozzle tip, .071, 100 amp
Nozzle tip, .082, 150 amp
Nozzle tip, .091, 200 amp
Nozzle tip, 250 amp
Nozzle tip, 360 amp
Nozzle tip, 400 amp
Nozzle base, 50 amp
Nozzle base, 100–400 amp
Nozzle, .099, 250 amp
Nozzle, .120, 360 amp
Nozzle, .130, 400 amp
SilverLine® electrode, 50–250 amp
SilverLine electrode, 360 amp
Electrode, CopperLine®, 250 amp
Electrode, N2/ArH2, 600 amp
Pkg
qty
1
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
7
5
4
2
3
1
Hypertherm technology –
SilverLine electrodes
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
14www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
ESAB® PT-19XLS®
System: ESP®-200/300/400/600C/1000, PCM®-150/1500
Maintenance items
Centricut
part number
15
16
17
18
C47-068
C47-071
C96-042
C47-142
L47-143
C10-660
L47-194
C122-530R
C47-083
19 C122-8050
20 C96-6000
C96-6100
21 C47-066
C122-081
C122-088
C47-900
C10-483
C122-072
C122-073
C122-087
C10-033
C47-528
C10-W85
C10-106
C47-998
C47-006
L47-110
L47-075
027055
20
17
Reference
number
Description
37068
37071
N/A
948142
948143
35660
22194
0558002530R, 35661
37083
0558001825
0558001825
0558001825
37066
N/A
N/A
N/A
19483
N/A
N/A
N/A
951000
996528
86W85
2064106
N/A
181W89
37110
37075
N/A
Electrode holder
Contact ring assembly
Electrode holder mounting nut, PT-600
Gas baffle, 4 x .032, 50–200 amp
Gas baffle, 4 x .032, 50–200 amp, reverse
Gas baffle, 8 X .047, 250–600 amp
Gas baffle, 32 X .023, 400 amp
Gas baffle, 8 x .047, 250–600 amp, reverse
Insulator body
Torch head, quick-change
Torch base, quick-change, PT-600
Torch kit, quick-change, PT-600
Torch body
I H S wire assembly kit
Bullet plug kit, quick-change torch
Insulating tube kit, PT-19XLS/PT-600
Double threaded mounting tube
O-ring kit, bullet plugs
O-ring kit, mounting nut
O-ring kit, retaining cap
O-ring, PTFE* tubes
O-ring, outside insulator body and torch
O-ring, insulator body center
O-ring, insulator body rear edge, red
O-ring kit, insulator body
O-ring, nozzle
Electrode holder removal tool
P.A. collet and wire assembly
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
5
1
5
1
1
1
1
1
*PolyTetraFluoroEthylene is a fluorocarbon-based polymer and is commonly abbreviated PTFE. The Teflon® brand of PTFE is manufactured only by
DuPont and is not sold by Hypertherm. Hypertherm purchases other brands of PTFE from various high quality manufacturers.
21
19
16
18
15
C96-6100 Torch kit, PT-600/PT-19XLS quick-change includes:
Centricut
part number
Reference
number
Description
C96-6000
C122-8050
C96-042
C96-621
C122-082
C47-944
C122-072
C122-073
C122-087
027055
808900
0558001825
0558001825
N/A
0558001621
N/A
0000021944
N/A
N/A
N/A
N/A
N/A
Torch base, quick-change, PT-600
Torch head, quick-change
Electrode holder mounting nut
Electrode holder
Nozzle retaining cap
Diffuser, 100–600 amp
O-ring kit, bullet plugs
O-ring kit, mounting nut
O-ring kit, retaining cap
Lubricant .25 oz. (7 ml) tube
Field service bulletin
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
15www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
ESAB® PT-600®
System: ESP®-200/300/400/600C/1000, PCM®-150/1500
Consumables
Centricut
part number
13
14
10
11
8
12
9
1 C47-081
2 L47-795
3 C47-802
C47-945
C122-141
4 L47-796
5 C47-944
C47-496
6 C122-082
7 C47-082
8 C47-026
9 C47-029
C47-030
C47-031
C47-922
C47-985
C47-995
10 C47-027
11 C47-028
C122-020
12 C47-822
C47-885
C47-195
13 C96-1024*
14 C96-1016*
L96-2499
Reference
number
Description
37081
21795
21802
21945
0558004678
21796
21944
22496
N/A
37082
22026
22029
22030
22031
22032
22034
22033
22027
22028
0558001883
0558001623
0558001885
0558001886
0558001624
0558002516
0558002499
Shield retainer, copper
Shield, 50 amp
Shield, 100–250 amp
Shield, 325–600 amp
Shield, 4.1 mm, 200 amp, EPP process
Diffuser, 50 amp
Diffuser, 100–600 amp
Diffuser, 100–600 amp, reverse
Nozzle retaining cap, quick-change
Nozzle retaining cap
Nozzle tip, .041, 50 amp
Nozzle tip, .071, 100 amp
Nozzle tip, .082, 150 amp
Nozzle tip, .091, 200 amp
Nozzle tip, 250 amp
Nozzle tip, 360 amp
Nozzle tip, 400 amp
Nozzle base, 50 amp
Nozzle base, 100–400 amp
Nozzle, 2.0mm, 200 amp
Nozzle, .099, 250 amp
Nozzle, .120, 360 amp
Nozzle, .130, 400 amp
SilverLine® electrode, 250 amp
SilverLine electrode, 360/400 amp
Electrode, N2
Pkg
qty
1
5
1
1
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
*Centricut part features a unique Hypertherm design that differs from the OEM design.
6
7
5
4
2
3
1
Hypertherm technology –
SilverLine electrodes
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
16www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
ESAB® PT-600®
System: ESP®-200/300/400/600C/1000, PCM®-150/1500
Maintenance items
Centricut
part number
15 C96-621
16 C47-071
C47-073
17 C96-042
18 C47-142
L47-143
C122-530R
C10-660
L47-194
C47-528
C47-998
C10-483
C47-083
19 C122-8050
20 C96-6000
C96-6100
21 C96-925
C122-081
C122-088
C47-900
C122-072
C122-073
C122-087
L96-4611
L10-4775
027055
20
Reference
number
Description
0558001621
37071
37073
N/A
0558002533
0558002534
0558002530R, 35661
0558001625
22194
996528
N/A
19483
37083
0558001825
0558001825
0558001825
0558001825
N/A
N/A
N/A
N/A
N/A
N/A
0558004611
34775
N/A
Electrode holder
Contact ring assembly
Screw, contact ring
Electrode holder mounting nut, PT-600
Gas baffle, 4 x .032, 50–200 amp
Gas baffle, 4 x .032, 50–200 amp, reverse
Gas baffle, 8 x .047, 250–600 amp, reverse
Gas baffle, 8 X .047, 300–600 amp
Gas baffle, 32 X .023, 400 amp
O-ring, outside insulator body and torch
O-ring, kit, insulator body
Double threaded mounting tube
Insulator body use with C47-066
Torch head, quick-change
Torch base, quick-change, PT-600
Torch kit, quick-change, PT-600
Torch body assembly, modular, with insulator
I H S wire assembly kit
Bullet plug kit, quick-change torch
Insulating tube kit, PT-19XLS/PT-600
O-ring kit, bullet plugs
O-ring kit, mounting nut
O-ring kit, retaining cap
Electrode holder tool
Power cable, 4.5 ft.
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
1
1
1
1
1
1
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
17
21
C96-6100 Torch kit, PT-600/PT-19XLS quick-change includes:
16
18
19
Centricut
part number
Reference
number
Description
C96-6000
C122-8050
C96-042
C96-621
C122-082
C47-944
C122-072
C122-073
C122-087
027055
808900
0558001825
0558001825
N/A
0558001621
N/A
21944
N/A
N/A
N/A
N/A
N/A
Torch base, quick-change, PT-600
Torch head, quick-change
Electrode holder mounting nut
Electrode holder
Nozzle retaining cap
Diffuser, 100–600 amp
O-ring kit, bullet plugs
O-ring kit, mounting nut
O-ring kit, retaining cap
Lubricant .25 oz. (7 ml) tube
Field service bulletin
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
15
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
17www.hypertherm.com/centricut/plasma
Enhanced performance for ESAB PT-600® and PT-19XLS®
Centricut heavy duty consumables for ESAB torches deliver superior
consumable life for all cutting processes and provide excellent cut
quality and cut speed.
Consumable life as measured in customer applications
•Up to 30% longer consumable life compared to
ESAB UL electrode
•Cutting speed and cut quality equal to ESAB
•Full product line covers all cutting amperages and
processes – including 200A EPP
Consumable life
•High-quality parts – set to set consistency
Centricut
OEM
High performing consumables for ESAB PT-600 and PT-19XLS torches.
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
18www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
ESAB® PT-600® and PT-19XLS® heavy duty
System: ESP®-200/300/400/600C/1000, PCM®-150/1500
Consumables
Centricut
Reference
part number numbers
8
9
10
11
7
1 C47-081
2 C122-130
3 C122-141
C122-166
C122-199
L47-796
4 C47-944
C47-496
5 C122-082
6 C47-082
7 C122-018
C122-020
C122-023
C122-025
C122-030
C122-036
C122-041
8 C47-1096
9 C47-1086
10 C96-1024
11 C96-1016
37081
21795
0558006141
21802
21945
21796
21944
22496
N/A
37082
N/A
N/A
N/A
21822
35885
22195
22401
34086
35886
0558004461
0558004462
Description
N/A
0558006130
0558004678
0558006166
0558006199
N/A
N/A
N/A
N/A
N/A
0558001882
0558001883
0558001884
0558001623
0558001885
0558001886
0558001887
0558004458
0558004460
0558001624
0558002516
N/A
0004470027
N/A
0004470028
0004470029
0004470030
0004470031
0004470115
N/A
0004470045
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0004485684
0004485829
N/A
N/A
Shield retainer, copper
Shield, 3.0 mm, 35–50 amp
Shield, 4.1 mm, 200 amp (PT-600 EPP Process)
Shield, 6.6 mm, 100–250 amp
Shield, 9.9 mm, 325–600 amp
Diffuser, 50 amp
Diffuser, 100–600 amp
Diffuser,100–600 amp, reverse
Nozzle retaining cap, quick - change
Nozzle retaining cap
CoolFlow™ nozzle, 1.8 mm, 100 amp
CoolFlow nozzle, 2.0 mm, 150–200 amp
CoolFlow nozzle, 2.3 mm, 200 amp
CoolFlow nozzle, 2.5 mm, 250 amp
CoolFlow nozzle, 3.0 mm, 360 amp
CoolFlow nozzle, 3.6 mm, 400 amp
CoolFlow nozzle, 4.1 mm, 600 amp
SilverLine® electrode, 50–250 amp, PT-19XLS
SilverLine electrode, 360 amp, PT-19XLS
SilverLine electrode, 250 amp, PT-600
SilverLine electrode, 360/400 amp, PT-600
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
6
4
2
3
1
Hypertherm technology –
SilverLine electrodes
and CoolFlow nozzles
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
19www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
ESAB® PT-600® and PT-19XLS® heavy duty
System: ESP®-200/300/400/600C/1000, PCM®-150/1500
Maintenance items
Centricut
Reference
part number number
12
13
14
15
16
17
18
19
C47-068
C96-621
C47-071
C47-142
L47-143
C10-660
C122-530R
L47-194
C96-042
C122-8050
C96-6000
C96-6100
C47-066
C96-925
C122-081
C122-088
C122-072
C122-073
C122-087
027055
37068
N/A
37071
948142
948143
35660
35661
22194
N/A
N/A
N/A
N/A
37066
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Description
N/A
0558001621
0558003858
0558002533
0558002534
0558001625
0558002530R
0558002532
N/A
0558001825
0558001825
0558001825
N/A
0558001825
N/A
N/A
N/A
N/A
N/A
N/A
0004470037
N/A
N/A
0004485612
0004485613
0004485827
N/A
0004470097
N/A
0004470040
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Electrode holder, PT-19XLS
Electrode holder, PT-600
Contact ring assembly
Gas baffle, 4 x .032, 50–200 amp
Gas baffle, 4 x .032, 50–200 amp, reverse
Gas baffle, 8 x .047, 250–600 amp
Gas baffle, 8 x .047, 250–600 amp, reverse
Gas baffle, 32 x .023, 400 amp
Electrode holder mounting nut
Torch head, quick-change
Torch base, quick-change, PT-600
Torch kit, quick-change, PT-600
Torch body, PT-19XLS
Torch body, PT-600
I H S wire assembly kit
Bullet plug kit, quick-change torch
O-ring kit, bullet plugs
O-ring kit, mounting nut
O-ring kit, retaining cap
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
18
C96-6100 Torch kit, PT-600/PT-19XLS quick-change includes:
16
19
14
15
Centricut
part number
Reference
number
Description
C96-6000
C122-8050
C96-042
C96-621
C122-082
C47-944
C122-072
C122-073
C122-087
027055
808900
0558001825
0558001825
N/A
0558001621
N/A
0000021944
N/A
N/A
N/A
N/A
N/A
Torch base, quick-change, PT-600
Torch head, quick-change
Electrode holder mounting nut
Electrode holder
Nozzle retaining cap
Diffuser, 100–600 amp
O-ring kit, bullet plugs
O-ring kit, mounting nut
O-ring kit, retaining cap
Lubricant .25 oz. (7 ml) tube
Field service bulletin
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
17
12
13
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
20www.hypertherm.com/centricut/plasma
Best performance for ESAB® PT-600® and PT-19XLS®
For optimum consumable life, cut quality and speed for your ESAB
cutting process, use Centricut’s best performing XP3 consumables
which utilize Hypertherm’s latest plasma technologies.
Centricut XP3 vs. OEM
Cut quality over life of consumables
Cut quality measured according to ISO 9013 ranges 3 and 4
• On average, doubled consumable life compared to ESAB
UL electrode
• 25% cutting speed increase on average
• Lower dross and better cut quality than ESAB over the
life of the consumables
XP3 cuts
25% faster
1800
1350
Number of 20-second starts
• High-quality parts – set to set consistency
XP3 cuts
33% faster
900
XP3 cuts
20% faster
450
0
XP3 OEM
XP3 OEM
XP3 OEM
12 mm (1/2")
mild steel
at 200 amps
12 mm (1/2")
mild steel
at 260 amps
20 mm (3/4")
mild steel
at 360 amps
Highest performing consumables for ESAB® PT-600® and PT-19XLS® torches.
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
21www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
XP3 for ESAB® PT-600® and PT-19XLS®
System: ESP®-200/300/400/600C/1000, PCM®-150/1500
Consumables
Centricut
part number
1 C47-081
2 C120-920*
C120-900
C120-936
3 C47-944
C47-496
4 C122-082
5 C47-082
6 C120-200
C120-260
C120-360
C120-2200*
C120-2260*
C120-2360*
7 C120-030*
8 C120-1010*
8
5
Reference
number
Description
37081
N/A
N/A
N/A
21944
22496
N/A
37082
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Shield retainer, copper
MultiPort shield, 200 amp
MultiPort shield, 260 amp
MultiPort shield, 360 amp
Diffuser, 100–600 amp
Diffuser,100–600 amp, reverse
Nozzle retaining cap, quick-change
Nozzle retaining cap
CoolFlow™ nozzle tip, 200 amp
CoolFlow nozzle tip, 260 amp
CoolFlow nozzle tip, 360 amp
CoolFlow nozzle kit, 200 amp, 20 pack
CoolFlow nozzle kit, 260 amp, 20 pack
CoolFlow nozzle kit, 360 amp, 20 pack
CoolFlow nozzle base assembly
SilverLine® electrode
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
4
Note: CoolFlow nozzle kits contain 20 CoolFlow nozzle tips and one CoolFlow nozzle base assembly.
7
6
3
2
1
Hypertherm technology –
SilverLine electrodes and CoolFlow™
nozzles and MultiPort shield
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
22www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
XP3 for ESAB PT-600® and PT-19XLS®
System: ESP®-200/300/400/600C/1000, PCM®-150/1500
Maintenance items
Centricut
part number
9 C96-621
10 C47-071
C47-073
11 C10-660
C47-142
C47-083
12 C96-042
13 C122-8050
14 C96-6000
C96-6100
C47-066
15 C96-925
C122-081
C122-088
C47-006
C47-998
C122-072
C122-073
C122-087
C120-012
C120-013
027055
14
Reference
number
Description
0558001621
37071
37073
0558001625, 35660
0558002533, 948142
37083
N/A
0558001825
0558001825
0558001825
37066
0558001825
N/A
N/A
181W89
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Electrode holder
Contact ring assembly
Screw, contact ring assembly
Gas baffle, 8 X .047, 300–600 amp
Gas baffle, 4 x .032, 50–200 amp
Insulator body – use with C47-066
Electrode holder mounting nut, PT-600
Torch head, quick-change
Torch base, quick-change, PT-600
Torch kit, quick-change, PT-600
Torch body
Torch body modular
I H S wire assembly kit
Bullet plug kit, quick-change torch
O-ring, nozzle
O-ring, kit, insulator bod
O-ring kit, bullet plugs
O-ring kit, mounting nut
O-ring kit, retaining cap
Wrench, elec/nozzle
Wrench, nozzle base
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
1
1
1
1
1
1
1
C96-6100 Torch kit, PT-600/PT-19XLS quick-change includes:
12
15
10
11
Centricut
part number
Reference
number
Description
C96-6000
C122-8050
C96-042
C96-621
C122-082
C47-944
C122-072
C122-073
C122-087
027055
808900
0558001825
0558001825
N/A
0558001621
N/A
0000021944
N/A
N/A
N/A
N/A
N/A
Torch base, quick-change, PT-600
Torch head, quick-change
Electrode holder mounting nut
Electrode holder
Nozzle retaining cap
Diffuser, 100–600 amp
O-ring kit, bullet plugs
O-ring kit, mounting nut
O-ring kit, retaining cap
Lubricant .25 oz. (7 ml) tube
Field service bulletin
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
13
9
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
23www.hypertherm.com/centricut/plasma
Consumable technology for ESAB® PT-36® (m3® system)
Centricut consumables lower your cost of cutting without sacrificing
quality or productivity.
Consumable life
• Up to double the life of ESAB consumables as tested in
the lab and field
1600
1600
• Cutting speed and cut quality equal to ESAB
1400
1400
• Full product line covers all cutting amperages and metals
1200
1200
• High-quality parts – set to set consistency
Centricut
OEM
1000
1000
Number of 20-second starts
800
800
600
600
400
400
200
200
0
0
200 amps
300 amps
Long life consumables from Centricut reduce the number of consumables purchased
each year.
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
24www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
ESAB® PT-36® (m3® system)
System: ESP®-200/300/400/600C/1000, EPP-200, 360
Consumables
Centricut
part number
7
8
9
10
6
4
3
2
1
Hypertherm technology –
SilverLine electrodes
and CoolFlow nozzles
5
1 C47-081
L122-616
2 C122-624
C122-130
C122-141
C122-166
C122-199
L47-796
3 C47-944
C47-496
4 C122-082
5 C47-082
6 C122-908
C122-8010
C122-6010
C122-014
C122-018
C122-020
C122-023
C122-025
C122-030
C122-036
C122-041
7 C122-1059
8 C122-1014*
9 C122-1091
10 C122-1000
C122-928
C122-548
C122-766
C122-551
C122-550
C122-948
C122-619
C122-722
C122-625
C122-028
Reference
number
Description
37081
0558009395
0558007624
0558006130
0558006141
0558006166
0558006199
21796
21944
22496
N/A
37082
0558006908
0558008010
0558006010
0558006014
0558006018
0558006020
0558006023
0558006025
0558006030
0558006036
0558006041
0558005459
0558003914
0558007791, 0558003914
0558012000, 0558003914
0558003928
0558009548
0558010766
0558009551
0558009550
N/A
0558011619
0558010722
0558011625
0558006028
Shield retainer, copper
Shield retainer, plastic
Shield, 2.4 mm, 45–55 amp
Shield, 3.0 mm, 35–50 amp
Shield, 4.1 mm, 100–280 amp
Shield, 6.6 mm, 260–450 amp
Shield, 9.9 mm, 360–600 amp
Diffuser, 50 amp
Diffuser, 100–600 amp
Diffuser,100–600 amp, reverse
Nozzle retaining cap, quick-change
Nozzle retaining cap
CoolFlow™ nozzle, .08 mm, 35 amp
CoolFlow nozzle, 1.0 mm, PR, 45–55 amp
CoolFlow nozzle, 1.0 mm, 50 amp
CoolFlow nozzle, 1.4 mm, 100 amp
CoolFlow nozzle, 1.8 mm, 130 amp
CoolFlow nozzle, 2.0 mm, 200 amp
CoolFlow nozzle, 2.3 mm, 280 amp
CoolFlow nozzle, 2.5 mm, 300 amp
CoolFlow nozzle, 3.0 mm, 360 amp
CoolFlow nozzle, 3.6 mm, 450 amp
CoolFlow nozzle, 4.1 mm, 600 amp
SilverLine® electrode, O2, 45–90 amp
SilverLine electrode, long life, 200-450 amp
SilverLine electrode, O2, 260–450 amp
SilverLine electrode, O2, 100–450 amp, XC
Electrode, SS/AL, 600 amp
Shield retainer, XC
Shield, 6.6 mm, XC
Shield, 5.1 mm, XC
Nozzle retaining cap, XC
Nozzle retaining cap, quick-change, XC
CoolFlow nozzle, 1.9 mm, 200 amp, XC
CoolFlow nozzle, 2.2 mm, 260 amp, XC
CoolFlow nozzle, 2.5 mm, 360 amp, XC
CoolFlow nozzle, 2.8 mm, 450 amp, XC
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
*C122-1014 electrode is not recommended for cutting below 200 amps or marking applications.
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
25www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
ESAB® PT-36® (m3® system)
System: ESP®-200/300/400/600C/1000, EPP-200, 360
Maintenance items
Centricut
part number
11 C122-924
12 C47-071
C47-073
13 C122-457
C122-533
C122-530R
C10-660
L122-3918
C10-483
14 C122-055
15 C122-8050
16 C122-8000
C122-8100
C122-9100
17 C122-804
C122-081
C122-088
C122-072
C122-073
C122-087
027055
16
14
Reference
number
Description
0558003924
0558003858
37073
0558005457
0558002533
0558002530R, 35661
0558001625
0558003918
0558001626
N/A
0558003804
0558003804
0558003804
0558003804
0558003804
N/A
N/A
N/A
N/A
N/A
N/A
Electrode holder
Contact ring assembly
Screw, contact ring
Gas baffle, 4X.022, 35–70 amp
Gas baffle, 4X.032, 100–280 amp
Gas baffle, 8 x .047, 250–600 amp, reverse
Gas baffle, 8X.047, 300–600 amp
Electrode nut driver
Double threaded mounting tube
Electrode holder mounting nut
Torch head, quick-change, PT-36
Torch base, quick-change, PT-36
Torch kit, quick-change, PT-36
Torch kit, quick-change, PT-36, XC
Torch body
I H S wire assembly kit
Bullet plug kit, quick-change torch
O-ring kit, bullet plugs
O-ring kit, mounting nut
O-ring kit, retaining cap
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
17
C122-8100 Torch kit, PT-36 quick-change includes:
15
12
13
Centricut
part number
Reference
number
Description
C122-8000
C122-8050
C122-055
C122-924
C122-082
C47-944
C122-072
C122-073
C122-087
027055
808900
N/A
N/A
N/A
0558003924
N/A
0000021944
N/A
N/A
N/A
N/A
N/A
Torch base, quick-change, PT-36
Torch head, quick-change, PT-36
Electrode holder mounting nut
Electrode holder
Nozzle retaining cap
Diffuser, 100–600 amp
O-ring kit, bullet plugs
O-ring kit, mounting nut
O-ring kit, retaining cap
Lubricant .25 oz. (7 ml) tube
Field service bulletin
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
11
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
26www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Kaliburn® FineLine™200
System: FineLine™ 200PC and 150PC
Consumables
Centricut
part number
11
10
8
9
6
7
4
5
1 C104-210
2 I104-230
I104-233
I104-237
C104-231
C104-232
C104-234
3 C104-217
C104-218
C107-266
I104-222
I104-228
I104-229
C104-223
C104-224
I104-240
4 C104-225
C104-239
5 C104-227
I104-279
6 C104-277
7 C104-221
I104-213
I104-238
C104-214
8 C104-1005
C104-215
C104-115
9 C104-1015
Reference
number
Description
200210
200230
200233
200237
200231
200232
200234
200217
200218
277266, 200219
200222
200228
200229
200223
200224
200240
200225
200239
200227
200279
200277
200221
200213
200238
200214
200215
200215
202115
202115
Outer cap
Shield cap, 30 amp, MS/AL
Shield cap, 30 amp, SS
Shield cap, 50 amp, SS
Shield cap, 50–70 amp, MS/SS/AL
Shield cap, 100 amp, MS/SS/AL
Shield cap, 200 amp, MS/SS/AL
Retaining cap, 30/50/70 amp, MS
Retaining cap, 100 amp, MS
Retaining cap, 200/275 amp, MS/SS/AL
Nozzle, 30 amp, MS/AL
Nozzle, 30 amp, SS
Nozzle, 50 amp, SS
Nozzle, 50 amp, MS/AL
Nozzle, 70 amp, MS
Nozzle, 70 amp, AL/SS
Nozzle, 100 amp, MS
Nozzle, 100 amp, AL/SS
Nozzle, 200 amp, MS/SS/AL
Swirl ring, 30 amp, SS
Swirl ring, 100 amp, MS
Swirl ring, 200 amp, MS
Electrode, 30 amp, MS/AL
Electrode, 30–50 amp, SS
Electrode, 50–70 amp, MS
SilverLine® electrode, 100 amp, MS
Electrode, 100 amp, MS
Electrode, 200 amp, MS
SilverLine electrode, 200 amp, MS
Reference
number
Description
200112
200109
200000
N/A
Cooling tube
Wrench, cooling tube
Torch body
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maintenance items
3
2
Centricut
part number
10 C104-112
C104-109
11 I104-200
027055
Pkg
qty
1
1
1
1
1
Hypertherm technology –
SilverLine electrodes
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
27www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Kaliburn® SR-45i®
System: SR-45i®
Consumables
1
2
3
4
5
6
Centricut
part number
Reference
number
Description
I36-098
C36-030
C36-104
C36-000
C36-012
C36-715*
770098
770030
770104
770000
770012
770015/ 770017
Retaining cap
Nozzle, insulation
Nozzle, tapered
Nozzle, Air
Swirl ring
Electrode, Air
Reference
number
Description
770073
770072
N/A
Torch body
O-ring
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
5
5
5
1
5
Maintenance items
Centricut
part number
7
7 I36-073
136-072
027055
Pkg
qty
1
5
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
6
5
2
3
4
1
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
28www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Kaliburn® SR-45i® Retrofit
System: SR-45i®
Consumables
1
2
3
4
5
6
7
8
9
10
Centricut
part number
Reference
number
Description
020200
C02-104
020197
C02-102
C02-131
C02-115
020466
C02-101
C02-103
020467
020200
020104
020197
020102
020131
020115
020466
020101
020103
020467
Retaining cap, high visibility
Retaining cap
Nozzle, high visibility
Nozzle
Nozzle, pipe
Nozzle
Nozzle, extended
Swirl ring
Electrode, Air
Electrode, Air, extended
Reference
number
Description
044016
N/A
N/A
O-ring
Retrofit modular torch body
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
5
10
10
10
5
2
10
5
Maintenance items
11
Centricut
part number
C02-016
11 C36-973
027055
9
Pkg
qty
5
1
1
10
8
7
4
3
1
5
6
2
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
29www.hypertherm.com/centricut/plasma
Superior performance for Kaliburn® Spirit®, Spirit® II, and
ProLine® systems
Centricut torches and consumables lower your cost of cutting, improve
cut quality, increase productivity and ensure process reliability.
Consumable life with ISO 9013.2002 (E) cut quality
ranges noted
•Two to three times longer consumable life with improved
cut quality up to 275 A
• 50% longer consumable life cutting at 400 A
• Improved swirl ring design is more robust than Kaliburn
• High-quality parts – set to set consistency
•Centricut quick disconnect torch gives fast job changeover
and easy consumables change
•Superior performance at a lower price for your Kaliburn
Spirit and ProLine systems
5000
Range 5
4500
Range 4
Range 3
4000
Range 2
3500
3000
2500
2000
1500
20-second cuts
1000
500
0
Centricut Kaliburn
19 mm (0.75 inch)
150 amp
Centricut Kaliburn
19 mm (0.75 inch)
200 amp
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
30www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Kaliburn® Spirit®, Spirit II®, and ProLine®
System: Spirit 150a, 200a, 275a, 400a, Spirit ll 150, 275, 400, ProLine 2150, 2200, 2260
Consumables
Centricut
part number
11
12
9
6
13
10
7
8
4
5
2
3
1
Hypertherm technology –
SilverLine electrodes
and CoolFlow nozzles
1 C107-154
C107-050
2 C107-145
C107-144
C107-115
C107-149
C107-150
C107-286
I107-146
C107-117
C107-274
C107-263
3 C107-123
4 C107-153
C107-110
C107-151
C107-152
I107-113
C107-266
5 C107-121
6 C107-120*
C107-021*
C107-122*
C107-023*
C107-125*
I107-124
C107-284*
I107-126
7 C107-293*
I107-297
C107-289*
C107-269*
C107-276*
8 C107-025*
9 C107-140
C107-138
C107-142
C107-283*
I107-141
10 C107-139*
C107-143*
C107-259*
C107-258*
C107-022*
11 C107-130
C107-137
C107-131
I107-132
12 C107-1082*
I107-133
C107-1092*
I107-135
C107-1091*
C107-1070*
13 C107-1024*
Reference
number
Description
277154
284150
277145
277144
277115
277149
277150
277286
277146
277117
277274
277263
284123
277153
277110
277151
277152
277113
277266
284121
277120
277121
277122
277123
277125
277124
277284
277126
277293
277297
277289
277269
277276
284125
277140
277138
277142
277283
277141
277139
277143
277259
277258
284122
277130
277137
277131
277132
277282
277133
277292
277135
277291
277270
284124
Outer cap, 30–275 amp
Outer cap, 400 amp
Shield cap, 30 amp, MS/AL
Shield cap, 30 amp, SS, Air
Shield cap, 50 amp, MS
Shield cap, 50 amp, SS, Air
Shield cap, 70 amp, MS/SS/AL
Shield cap, 100 amp, MS/SS/AL, Air
Shield ring, 100 amp, SS, H17
Shield cap, 150 amp, MS/SS/AL
Shield cap, 200 amp, MS/SS/AL
Shield cap, 275 amp, MS/SS/AL
Shield cap, 400 amp, MS
Retaining cap, 30/50/070 amp, MS/SS/AL
Retaining cap, 30/150 amp SS, Air
Retaining cap, 100/150 amp, MS/SS/AL
Retaining cap, 150 amp, MS/SS/AL
Retaining cap, 200 amp SS, H17
Retaining cap, 200/275 amp, MS/SS/AL
Retaining cap, 400 amp, MS
CoolFlow™ nozzle, 30 amp, MS/AL
CoolFlow nozzle, 30 amp, SS, Air
CoolFlow nozzle, 50 amp, MS/AL
CoolFlow nozzle, 50 amp, SS, Air
CoolFlow nozzle, 70 amp, MS/SS/AL
Nozzle, 70 amp, SS, H17
CoolFlow nozzle, 100 amp, MS/SS/AL, Air
Nozzle, 100 amp, SS, H17
CoolFlow nozzle, 150 amp, MS/SS/AL, Air
Nozzle, 150 amp, SS, H17
CoolFlow nozzle, 200 amp, MS/SS/AL, Air
CoolFlow nozzle, 275 amp, MS
CoolFlow nozzle, 275 amp, SS/AL
CoolFlow nozzle, 400 amp, MS
Swirl ring, 30/50/70 amp, MS/SS/AL, H17
Swirl ring, 30 amp, SS, Air
Swirl ring, 50/70 amp, MS
Swirl ring, 100 amp, MS/SS/AL, Air
Swirl Ring, 100 amp, SS, H17
Swirl ring, 150 amp, MS/SS/AL
Swirl ring, 200 amp, MS/SS/AL
Swirl ring, 200 amp, SS, H17
Swirl ring, 275 amp, MS/SS/AL
Swirl ring, 400 amp, MS/SS/AL
Electrode, 30 amp, MS/AL
Electrode, 30/50 amp, SS, Air
Electrode, 50/70 amp, MS/SS/AL
Electrode, 70 amp, SS, H17
SilverLine® electrode, 100 amp, MS/SS/AL
Electrode, 100 amp, SS, H17
SilverLine electrode, 150 amp, MS/SS/AL
Electrode, 150 amp, SS, H17
SilverLine electrode, 200 amp, MS/SS/AL
SilverLine electrode, 275 amp, MS/SS/AL
SilverLine electrode, 400 amp, MS
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
31www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Kaliburn® Spirit®, Spirit II®, and ProLine®
System: Spirit 150a, 200a, 275a, 400a, Spirit ll 150, 275, 400, ProLine 2150, 2200, 2260
Maintenance items
Centricut
part number
C23-001
C107-007
C107-091
C107-126
14 C107-9150
C107-9100
15 C107-9050
C107-9000
C107-1050
C107-1000
C107-300
I107-056
I107-7087
027055
Reference
number
Description
N/A
277007
N/A
N/A
279150
279100
279050
279000
N/A
N/A
N/A
277056
277087
N/A
Swirl ring removal tool (up to 275 amp only)
Cooling tube
O-ring kit, torch head
O-ring kit, rear torch plugs
Torch head, Spirit 150–275 amp
Torch head, Spirit 400 amp
Torch base, Spirit 150–275 amp
Torch base, Spirit 400 amp
Torch kit, Spirit 150–275 amp
Torch kit, Spirit 400 amp
Plasma gas tube
Nozzle removal tool
Kaliburn electrode tool
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
C107-1050 Torch kit, Spirit 150–275 amp includes:
15
Centricut
part number
Description
C107-9050
C107-9150
C107-300
N/A
808040
Torch base, Spirit 150–275 amp
Torch head, Spirit 150–275 amp
Plasma gas tube
Insulation material
Field service bulletin
Pkg
qty
1
1
1
1
1
C107-1000 Torch kit, Spirit 400 amp includes:
Part number
Description
C107-9000
C107-9100
C107-300
N/A
808040
Torch base, Spirit 400 amp
Torch head, Spirit 400 amp
Plasma gas tube
Insulation material
Field service bulletin
Pkg
qty
1
1
1
1
1
14
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
32www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Kjellberg® HiFocus 100®
Torch: PerCut 101®
Consumables – Carbon steel
Centricut
part number
10*
9
8
5
Alternate
reference
Description
.11.835.201.081
.11.835.201.1561
.11.835.201.1571
.11.835.201.1581
.11.835.201.1591
.11.835.401.1571
.11.835.201.160
.11.835.201.162
.11.835.221.406
.11.835.221.407
.11.835.221.408
.11.836.221.409
.11.835.221.410
.11.835.221.411
.11.835.421.412
.11.835.221.412
.11.835.421.414
.11.835.221.153
.11.834.321.153
.11.835.421.303
.11.835.421.3101
.11.835.221.3101
Z501
Z4015
Z4020
Z4025
Z4030
Z4140
Z3004
Z3008
Z2006
Z2007
Z2008
Z2009
Z2010
Z2011
Z2112
Z2012
Z2114
Z101
Z111
Z111A
Z012
Z002
Protection cap
Swirl gas cap, 1.5 mm
Swirl gas cap, 2.0 mm
Swirl gas cap, 2.5 mm
Swirl gas cap, 3.0 mm
Swirl gas cap, 4.0 mm
Nozzle cap, complete, 0.4 mm
Nozzle cap complete, 0.8 mm
Nozzle, 0.6 mm
Nozzle, 0.7 mm
Nozzle, 0.8 mm
Nozzle, 0.9 mm
Nozzle, 1.0 mm
Nozzle, 1.1 mm
Nozzle, 1.2 mm
Nozzle, 1.2 mm
Nozzle, 1.4 mm
Gas guide cap, 0.4 mm
Gas guide cap
Spacer
SilverLine® electrode
SilverLine electrode
Reference
number
Alternate
reference
Description
.11.835.201.081
.11.835.411.1571
.11.835.411.1581
.11.835.411.1591
.11.835.201.162
.11.835.221.406
.11.835.221.407
.11.835.221.408
.11.835.221.410
.11.835.411.610
.11.835.411.612
.11.835.411.614
.11.835.411.616
.11.835.221.153
.11.834.321.153
.11.835.421.303
.11.835.211.5101
.11.835.411.5101
Z501
Z4520
Z4530
Z4540
Z3008
Z2006
Z2007
Z2008
Z2010
Z2510
Z2512
Z2514
Z2516
Z101
Z111
Z111A
Z042
Z052
Protection cap
Swirl gas cap, 2.0 mm
Swirl gas cap, 3.0 mm
Swirl gas cap, 4.0 mm
Nozzle cap complete, 0.8 mm
Nozzle, 0.6 mm
Nozzle, 0.7 mm
Nozzle, 0.8 mm
Nozzle, 1.0 mm
Nozzle, 1.0 mm
Nozzle, 1.2 mm
Nozzle, 1.4 mm
Nozzle, 1.6 mm
Gas guide cap, 0.4 mm
Gas guide cap
Spacer
Electrode
Electrode
Centricut
part number
Reference
number
Alternate
reference
Description
027055
N/A
1 C106-081
2 C106-561
C106-571
C106-581
C106-591
C106-171
4 C106-160
C106-162
5 C106-406
C106-407
C106-408
C106-409
C106-410
C106-411
C106-412
C106-112
C106-414
7 C106-153
8 K106-253
9 C106-303
10 C106-1021*
C106-1001*
11
7
Reference
number
6
Pkg
qty
1
1
1
1
1
1
1
1
10
10
10
10
10
10
10
10
10
1
1
1
1
1
Consumables – Stainless steel and aluminum
4
Centricut
part number
2
3
1
Hypertherm technology –
SilverLine electrodes
1 C106-081
3 C106-1571
C106-1581
C106-1591
4 C106-162
5 C106-406
C106-407
C106-408
C106-410
6 C106-610
C106-612
C106-614
C106-616
7 C106-153
8 K106-253
9 C106-303
11 C106-101
C106-5101
Pkg
qty
1
1
1
1
1
10
10
10
10
5
5
5
5
1
1
1
1
1
Maintenance items
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
33www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Kjellberg® HiFocus 130/160i®
Torch: PerCut 160/170®
Consumables – Carbon steel
Centricut
part number
9
8
7
6
5
Alternate
reference
Description
.11.835.201.081
.11.835.201.1561
.11.835.201.1571
.11.835.201.1551
.11.835.201.1581
.11.835.201.1591
.11.835.401.1571
.11.842.401.160
.11.842.401.162
.11.842.401.1622
.11.843.021.406
.11.843.021.407
.11.843.021.408
.11.843.021.409
.11.843.021.410
.11.843.021.411
.11.843.121.412
.11.843.021.412
.11.843.021.414
.11.843.121.414
.11.843.021.416
.11.843.121.416
.11.835.221.153
.11.835.221.154
.11.834.321.153
.11.835.421.303
.11.843.021.310
.11.843.121.310
Z501
Z4015
Z4020
Z4022
Z4025
Z4030
Z4140
S3004
S3008
S3028
S2006X
S2007X
S2008X
S2009X
S2010X
S2011X
S2112X
S2012X
S2014X
S2114X
S2016X
S2116X
Z101
Z102
Z111
Z111A
S002X
S012X
Protection cap
Swirl gas cap, 1.5 mm
Swirl gas cap, 2.0 mm
Swirl gas cap, 2.2 mm
Swirl gas cap, 2.5 mm
Swirl gas cap, 3.0 mm
Swirl gas cap, 4.0 mm
Nozzle cap, 0.4 mm
Nozzle cap, 0.8 mm
Nozzle cap, 0.8 mm
Nozzle, 0.6 mm, 25 amp
Nozzle, 0.7 mm, 35 amp
Nozzle, 0.8 mm, 50/60 amp
Nozzle, 0.9 mm, 70/80 amp
Nozzle, 1.0 mm, 80/90 amp
Nozzle, 1.1 mm, 90/100 amp
Nozzle, 1.2 mm, 100 amp
Nozzle, 1.2 mm, 100/130 amp
Nozzle, 1.4 mm, 130/160 amp
Nozzle, 1.4 mm, 130 amp
Nozzle, 1.6 mm, 160 amp
Nozzle, 1.6 mm, 160 amp
Gas guide cap, 0.4 mm
Gas guide cap
Gas guide cap
Spacer
SilverLine® electrode, XL
SilverLine electrode, XL
Reference
number
Alternate
reference
Description
.11.835.201.081
.11.835.411.1581
.11.835.411.1580
.11.835.411.1591
.11.835.411.1590
.11.842.401.162
.11.842.401.1621
.11.843.021.407
.11.843.021.408
.11.843.111.614
.11.843.111.616
.11.843.111.618
.11.835.221.153
.11.834.321.153
.11.842.411.510
.11.842.511.510
Z501
Z4530
Z4535
Z4540
Z4545
S3008
Z3018
S2007X
S2008X
S2514X
S2516X
S2518X
Z101
Z111
S042
S052
Protection cap
Swirl gas cap, 3.0 mm
Swirl gas cap, 3.5 mm
Swirl gas cap, 4.0 mm
Swirl gas cap, 4.5 mm
Nozzle cap, 0.8 mm
Nozzle cap, 0.8 mm
Nozzle, 0.7 mm, 35 amp
Nozzle, 0.8 mm, 50/60 amp
Nozzle, 1.4 mm, 120 amp
Nozzle, 1.6 mm, 140 amp
Nozzle, 1.8 mm, 160 amp
Gas guide cap, 0.4 mm
Gas guide cap
Electrode
Electrode
Centricut
part number
Reference
number
Alternate
reference
Description
K109-152
027055
.11.842.401.152
N/A
S901
1 C106-081
2 C106-561
C106-571
C109-551
C106-581
C106-591
C106-171
4 K109-160
C109-162
C109-622
5 C109-406
C109-407
C109-408
C109-409
C109-410
C109-411
C109-112
C109-412
C109-414
C109-114
C109-416
C109-116
7 C106-153
C109-154
8 K106-253
9 C106-303
10 C109-1010*
C109-1030*
11
10
Reference
number
4
Pkg
qty
1
1
1
1
1
1
1
1
1
1
10
10
10
10
10
10
10
10
10
10
10
10
1
1
1
1
1
1
Consumables – Stainless steel and aluminum
2
Centricut
part number
3
1
Hypertherm technology –
SilverLine electrodes
1 C106-081
3 C106-1581
C109-580
C106-1591
C109-590
4 C109-162
C109-621
6 C109-407
C109-408
C109-614
C109-616
C109-618
7 C106-153
8 K106-253
11 C109-510
C109-1510
Pkg
qty
1
1
1
1
1
1
1
10
10
5
5
5
1
1
1
1
Maintenance items
Cooling tube
Lubricant .25 oz. (7 ml) tube
Pkg
qty
5
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
34www.hypertherm.com/centricut/plasma
Consumables for Kjellberg® PerCut 210M torch
Centricut consumables lower your cost of cutting and deliver excellent
cut speeds and cut quality. Fit all versions of the PerCut 210M torch.
•Equal performance to Kjellberg at a lower price
•Critical to function tolerances and precision
manufacturing guarantee consistency of parts set to set
•No special system set up required and Centricut parts fit
all PerCut 210M torch designs
•Consumables available for Kjellberg Contour Cut™
processes
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
35www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Kjellberg® HiFocus 130/160i/161i®
Torch: PerCut 210M®
Consumables – Carbon steel
Centricut
part number
1 C124-081
K124-515
2 C124-520
C124-525
C124-530
C124-535
C124-540
K124-604
3 C124-628
K124-406
K124-407
4 C124-408*
C124-410*
C124-412*
C124-414*
C124-417*
5 C124-145
C124-146
6 C124-1000*
C124-142
6
5
4
Reference
number
Alternate
reference
Description
.11.848.201.081
.11.848.201.1515
.11.848.201.1520
.11.848.201.1525
.11.848.201.1530
.11.848.201.1535
.11.848.201.1540
.11.848.201.1604
.11.848.201.1628
.11.848.221.406
.11.848.221.407
.11.848.221.408
.11.848.221.410
.11.848.221.412
.11.848.221.414
.11.848.221.417
.11.848.221.145
.11.848.221.146
.11.848.221.300
.11.848.201.142
G501
G4015
G4020
G4025
G4030
G4035
G4040
G3004
G3028
G2006Y
G2007Y
G2008Y
G2010Y
G2012Y
G2014Y
G2017Y
G101
G102
G002Y
G901Y
Protection cap, 20–200 amp
Swirl gas cap, 25 amp
Swirl gas cap, 60 amp
Swirl gas cap, 90–130 amp
Swirl gas cap, 90–200 amp
Swirl gas cap, 200 amp, Contour Cut™
Swirl gas cap, 200 amp, Contour Cut
Nozzle cap, 25–35 amp
Nozzle cap, 60–200 amp
Nozzle, 25 amp
Nozzle, 35 amp
CoolFlow™ nozzle, 60 amp
CoolFlow nozzle, 90 amp
CoolFlow nozzle, 130 amp
CoolFlow nozzle, 160 amp
CoolFlow nozzle, 200 amp
Gas guide, low amperage and Contour Cut
Gas guide, 60–200 amp
SilverLine® electrode, 20–200 amp
Cooling tube, 20–200 amp
Pkg
qty
1
5
1
1
1
1
1
10
1
10
10
5
5
5
5
5
1
1
1
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
3
2
1
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
36www.hypertherm.com/centricut/plasma
Consumables for Kjellberg® PerCut 370 torches
Centricut consumables offer long life while delivering excellent
quality and productivity.
•Competitively priced compared to Kjellberg
•Stainless steel consumables for PerCut 370.1 last more
than 33% longer than Kjellberg
• Speed and cut quality equal to Kjellberg
•High-quality parts – set to set consistency
• Full product line including consumables for mild steel and
stainless steel cutting
Mild steel and stainless steel cutting consumables for HiFocus 280i/360i/440i.
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
37www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Kjellberg® HiFocus 280i/360i/440i®
Torch: PerCut 370.1®
Consumables – Carbon steel
Centricut
part number
10
1 C106-081
2 C106-561
C106-571
C109-551
C106-581
C106-591
C106-171
C106-1591
4 K109-160
C109-622
5 C109-406
C109-407
C109-408
C109-409
C109-410
C109-411
C109-112
C109-412
C109-114
C109-414
C109-416
C109-116
7 C106-153
C109-154
8 K106-253
9 C106-303
10 C109-1010*
C109-1030*
K109-152
11
9
8
7
6
5
4
Reference
number
Alternate
reference
Description
.11.835.201.081
.11.835.201.1561
.11.835.201.1571
.11.835.201.1551
.11.835.201.1581
.11.835.201.1591
.11.835.401.1571
.11.835.411.1591
.11.842.401.160
.11.842.401.1622
.11.843.021.406
.11.843.021.407
.11.843.021.408
.11.843.021.409
.11.843.021.410
.11.843.021.411
.11.843.121.412
.11.843.021.412
.11.843.121.414
.11.843.021.414
.11.843.021.416
.11.843.121.416
.11.835.221.153
.11.835.221.154
.11.834.321.153
.11.835.421.303
.11.843.021.310
.11.843.121.310
.11.842.401.152
Z501
Z4015
Z4020
Z4022
Z4025
Z4030
Z4140
Z4540
S3004
S3028
S2006X
S2007X
S2008X
S2009X
S2010X
S2011X
S2112X
S2012X
S2114X
S2014X
S2016X
S2116X
Z101
Z102
Z111
Z111A
S002X
S012X
S901
Protection cap
Swirl gas cap, 1.5 mm
Swirl gas cap, 2.0 mm
Swirl gas cap, 2.2 mm
Swirl gas cap, 2.5 mm
Swirl gas cap, 3.0 mm
Swirl gas cap, 4.0 mm
Swirl gas cap, 4.0 mm
Nozzle cap, 0.4 mm
Nozzle cap, 0.8 mm
Nozzle, 0.6 mm, 25 amp
Nozzle, 0.7 mm, 35 amp
Nozzle, 0.8 mm, 50/60 amp
Nozzle, 0.9 mm, 70/80 amp
Nozzle, 1.0 mm, 80/90 amp
Nozzle, 1.1 mm, 90/100 amp
Nozzle, 1.2 mm, 100 amp
Nozzle, 1.2 mm, 100/130 amp
Nozzle, 1.4 mm, 130 amp
Nozzle, 1.4 mm, 130/160 amp
Nozzle, 1.6 mm, 160 amp
Nozzle, 1.6 mm, 160 amp
Gas guide cap, 0.4 mm
Gas guide cap, 0.4 mm
Gas guide cap
Spacer
SilverLine® electrode, XL
SilverLine electrode, XL
Cooling tube
Reference
number
Alternate
reference
Description
.11.835.201.081
.11.835.201.1571
.11.835.411.1581
.11.835.411.1580
.11.835.411.1591
.11.835.411.1590
.11.833.101.158
.11.842.401.160
.11.842.401.162
.11.842.401.1621
.11.843.021.407
.11.843.021.408
.11.843.111.614
.11.843.111.616
.11.843.111.618
.11.834.321.153
.11.835.221.153
.11.842.411.510
.11.842.511.510
.11.842.401.152
Z501
Z4020
Z4530
Z4535
Z4540
Z4545
V4350
S3004
S3008
S3018
S2007X
S2008X
S2514X
S2516X
S2518X
Z111
Z101
S042
S052
S901
Protection cap
Swirl gas cap, 2.0 mm
Swirl gas cap, 3.0 mm
Swirl gas cap, 3.5 mm
Swirl gas cap, 4.0 mm
Swirl gas cap, 4.5 mm
Swirl gas cap, 5.0 mm
Nozzle cap, 0.4 mm
Nozzle cap, 0.8 mm
Nozzle cap, 0.8 mm
Nozzle, 0.7 mm, 35 amp
Nozzle, 0.8 mm, 50/60 amp
Nozzle, 1.4 mm, 120 amp
Nozzle, 1.6 mm, 140 amp
Nozzle, 1.8 mm, 160 amp
Gas guide cap
Gas guide cap, 0.4 mm
Electrode
Electrode
Cooling tube
Pkg
qty
1
1
1
1
1
1
1
1
1
1
10
10
10
10
10
10
10
10
10
10
10
10
1
1
1
1
1
1
5
Consumables – Stainless steel and aluminum
Centricut
part number
2
3
1
Hypertherm technology –
SilverLine electrodes
1 C106-081
2 C106-571
3 C106-1581
C109-580
C106-1591
C109-590
C53-158
4 K109-160
C109-162
C109-621
5 C109-407
C109-408
6 C109-614
C109-616
C109-618
8 K106-253
7 C106-153
11 C109-510
C109-1510
K109-152
Pkg
qty
1
1
1
1
1
1
1
1
1
1
10
10
5
5
5
1
1
1
1
5
*Centricut part features a unique Hypertherm design that differs from the OEM design.
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
38www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Kjellberg® HiFocus 280i/360i/440i®
Torch: PerCut 370.2®
Consumables – Carbon steel
Centricut
part number
11
Alternate
reference
Description
.11.833.101.155
.11.833.101.157
.11.841.721.081
.11.836.921.271
.11.836.901.163
.11.836.901.164
.11.836.901.165
.11.846.921.415
.11.846.921.420
.11.846.921.425
.11.846.921.427
.11.846.921.430
.11.836.921.153
.11.836.921.154
.11.836.921.1542
.11.844.921.300
V4335
V4345
T502
T522
T3030
T3045
T3060
T2115Y
T2120Y
T2125Y
T2127Y
T2130Y
T101
T102
T104
T012Y
Swirl gas cap, 3.5 mm
Swirl gas cap, 4.5 mm
Protection cap
Swirl gas nozzle
Nozzle cap
Nozzle cap
Nozzle cap
CoolFlow™ nozzle, 1.5 mm, 120 amp
CoolFlow nozzle, 2.0 mm, 200 amp
CoolFlow nozzle, 2.5 mm, 250 amp
CoolFlow nozzle, 2.7 mm, 300 amp
CoolFlow nozzle, 3.0 mm, 360 amp
Gas guide
Gas guide
Gas guide
SilverLine® electrode, O2/Air
Reference
number
Alternate
reference
Description
.11.833.101.1550
.11.833.101.156
.11.833.101.157
.11.833.101.158
.11.833.101.159
.11.846.901.1540
.11.846.901.1545
.11.846.901.1550
.11.841.721.081
.11.846.901.081
.11.836.921.271
.11.836.901.160
.11.846.901.1608
.11.846.901.1609
.11.846.901.1619
.11.846.901.1628
.11.836.911.623
.11.836.911.625
.11.846.911.627
.11.846.911.629
.11.836.911.500
V4330
V4340
V4345
V4350
V4360
T4040
T4045
T4050
T502
T503
T522
T3000
T3208
T3209
T3219
T3228
T2523
T2525
T2427
T2429
T051
Swirl gas cap, 3.0 mm
Swirl gas cap, 4.0 mm
Swirl gas cap, 4.5 mm
Swirl gas cap, 5.0 mm
Swirl gas cap, 6.0 mm
Swirl gas cap
Swirl gas cap
Swirl gas cap
Protection cap
Protection cap
Swirl gas nozzle
Nozzle cap
Nozzle cap
Nozzle cap
Nozzle cap
Nozzle cap
CoolFlow™ nozzle, 2.3 mm, 250 amp
CoolFlow nozzle, 2.5 mm, 280 amp
CoolFlow nozzle, 2.7 mm, 360 amp
CoolFlow nozzle, 2.9 mm, 440 amp
Electrode, ArH2
Centricut
part number
Reference
number
Alternate
reference
Description
C117-152
C117-230
027055
.11.844.901.152
.11.828.911.230
N/A
T902Y
V951
1 C117-155
C117-157
2 C117-081
4 C117-0271
6 C117-163
C117-164
C117-165
8 C117-015*
C117-020*
C117-025*
C117-027*
C117-030*
10 C117-153
C117-154
C117-542
11 C117-1000*
12
10
8
Reference
number
9
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Consumables – Stainless steel and aluminum
6
Centricut
part number
7
4
2
1
Hypertherm technology –
SilverLine electrodes and
CoolFlow™ nozzles
5
3
1 C117-550
C117-156
C117-157
C53-158
C117-159
5 C117-540
C117-545
C117-1550
2 C117-081
3 C117-1081
4 C117-0271
6 C117-160
7 C117-608
C117-609
C117-619
C117-628
9 C117-623*
C117-625*
C117-627*
C117-629*
12 C117-500
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maintenance items
Cooling tube (carbon steel)
Cooling tube (stainless steel and aluminum)
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
39www.hypertherm.com/centricut/plasma
Consumables for Kjellberg® PerCut 450M® torch
Centricut consumables lower your cost of cutting and deliver excellent
cut speeds and cut quality. Fit all versions of the PerCut 450M torch.
•Equal performance to Kjellberg at a lower price
•Critical to function tolerances and precision
manufacturing guarantee consistency of parts set to set
•No special system set up required and Centricut parts fit
all PerCut 450M torch designs
•Consumables available for Kjellberg Contour CutTM
processes
280 A cutting of 19 mm mild steel
1800
Zone 4
1600
Zone 3
1400
Zone 2
1200
1000
800
20-second cuts
•Improved cut quality over the life of the consumables
at 280A
Consumable life with ISO 9013.2002(E) cut quality
ranges noted
600
400
200
0
Centricut
Kjellberg
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
40www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Kjellberg® HiFocus 280i/360i/440i®
Torch: PerCut 450M®
Consumables – Carbon steel
Centricut
part number
11
12
9
10
7
8
5
6
3
1
4
Reference
number
Alternate
reference
Description
1 C124-081
.11.848.201.081
G501
Protection cap, 20–200 amp
2 C124-1081
.11.848.401.081
G521
Protection cap, 280–440 amp
K124-515
.11.848.201.1515
G4015
Swirl gas cap, 25 amp
3 C124-520
.11.848.201.1520
G4020
Swirl gas cap, 60 amp
C124-525
.11.848.201.1525
G4025
Swirl gas cap, 90–130 amp
C124-530
.11.848.201.1530
G4030
Swirl gas cap, 90–200 amp
C124-535
.11.848.201.1535
G4035
Swirl gas cap, 200 amp, Contour Cut™
C124-540
.11.848.201.1540
G4040
Swirl gas cap, 200 amp, Contour Cut
4 C124-550
.11.848.401.1550
G4350
Swirl gas cap, 280–360 amp
C124-555
.11.848.401.1555
G4355
Swirl gas cap, 360 amp
K124-604
.11.848.201.1604
G3004
Nozzle cap, 25–35 amp
5 C124-628
.11.848.201.1628
G3028
Nozzle cap, 60–200 amp
6 C124-609
.11.848.401.1609
G3209
Nozzle cap, 360 amp
C124-619
.11.848.401.1619
G3219
Nozzle cap, 280–360 amp
C124-629
.11.848.401.1629
G3229
Nozzle cap, 360 amp
K124-406
.11.848.221.406
G2006Y
Nozzle, 25 amp
K124-407
.11.848.221.407
G2007Y
Nozzle, 35 amp
C124-649
.11.848.401.1649
G3249
Nozzle cap, 280 amp
7 C124-408*
.11.848.221.408
G2008Y
CoolFlow™ nozzle, 60 amp
C124-410*
.11.848.221.410
G2010Y
CoolFlow nozzle, 90 amp
C124-412*
.11.848.221.412
G2012Y
CoolFlow nozzle, 130 amp
C124-414*
.11.848.221.414
G2014Y
CoolFlow nozzle, 160 amp
C124-417*
.11.848.221.417
G2017Y
CoolFlow nozzle, 200 amp
8 C124-426*
.11.848.421.426
G2326Y
CoolFlow nozzle, 280 amp
C124-430*
.11.848.421.430
G2330Y
CoolFlow nozzle, 360 amp
C124-431*
.11.848.421.431
G2331Y
CoolFlow nozzle, 400 amp
9 C124-145
.11.848.221.145
G101
Gas guide, low amperage and Contour Cut
C124-146
.11.848.221.146
G102
Gas guide, 60–200 amp
10 C124-045
.11.848.421.145
G121
Gas guide, 280–400 amp
11 C124-1000*
.11.848.221.300
G002Y
SilverLine® electrode, 20–200 amp
12 C124-1010*
.11.848.421.310
G032Y
SilverLine electrode, 280 amp
C124-1030*
.11.848.421.330
G034Y
SilverLine electrode, 360 amp
C124-142
.11.848.201.142
G901Y
Cooling tube, 20–200 amp
C124-042
.11.848.401.142
G931Y
Cooling tube, 280–400 amp
*Centricut part features a unique Hypertherm design that differs from the OEM design.
Pkg
qty
1
1
5
1
1
1
1
1
1
1
10
1
1
1
1
10
10
1
5
5
5
5
5
5
5
5
1
1
1
1
1
1
1
1
2
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
41www.hypertherm.com/centricut/plasma
Enhancements for Kjellberg® PB-S80 torch
Centricut consumables lower your cost of cutting without sacrificing
cut quality or productivity.
•25% longer consumable life compared to Kjellberg Yellow
XLife on mild steel
Consumable life with ISO 9013.2002(E) cut quality
ranges noted
•Speed and cut quality equal to Kjellberg
250 A cutting of 19 mm mild steel
1200
•High quality parts – set to set consistency
Range 4
1000
•Full product line featuring consumables for both mild steel
and stainless steel cutting
Range 3
800
20-second cuts
600
400
200
0
Centricut
Kjellberg
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
42www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Kjellberg® FineFocus 800 Plus®
Torch: PB-S80
Consumables – Carbon Steel (O2)
Centricut
part number
1 C117-155
C117-157
2 C53-261
C117-261
3 C117-271
C117-0271
C117-1271
5 C117-163
C117-164
C117-165
7 C117-015*
C117-020*
C117-025*
C117-027*
C117-030*
9 C117-153
C117-154
C117-542
10 C117-1000*
C117-152
11
10
9
7
8
6
5
Reference
number
Alternate
reference
Description
.11.833.101.155
.11.833.101.157
.11.833.101.261
.11.833.121.261
.11.836.901.271
.11.836.921.271
.11.833.121.271
.11.836.901.163
.11.836.901.164
.11.836.901.165
.11.846.921.415
.11.846.921.420
.11.846.921.425
.11.846.921.427
.11.846.921.430
.11.836.921.153
.11.836.921.154
.11.836.921.1542
.11.844.921.300
.11.844.901.152
V4335
V4345
V501
V502
T521
T522
V522
T3030
T3045
T3060
T2115Y
T2120Y
T2125Y
T2127Y
T2130Y
T101
T102
T104
T012Y
T902Y
Swirl gas cap, 3.5 mm
Swirl gas cap, 4.5 mm
Protective cap
Protective cap
Swirl gas nozzle
Swirl gas nozzle
Swirl gas nozzle
Nozzle cap
Nozzle cap
Nozzle cap
CoolFlow™ nozzle, 1.5 mm, 120 amp
CoolFlow nozzle, 2.0 mm, 200 amp
CoolFlow nozzle, 2.5 mm, 250 amp
CoolFlow nozzle, 2.7 mm, 300 amp
CoolFlow nozzle, 3.0 mm, 360 amp
Gas guide
Gas guide
Gas guide
SilverLine® electrode
Water tube
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Consumables – Carbon Steel/Stainless Steel (Air)
Centricut
part number
3
4
2
1 C53-158
2 C117-261
C117-081
4 C117-1271
6 C53-790
C53-850
C53-860
C53-870
K53-440
Reference
number
Alternate
reference
Description
.11.833.101.158
.11.833.121.261
.11.841.721.081
.11.833.121.271
.12.37790
.12.40850
.12.40860
.12.40870
.12.51440
V4350
V502
T502
V522
V3000
L2
V101
K2
V931
Swirl gas cap, 5.0
Protective cap
Protective cap
Swirl gas nozzle
Nozzle cap
Nozzle, 250 amp
Gas guide
Electrode, Air
Cooling tube, PB-S75, Air
Pkg
qty
1
1
1
1
1
5
5
5
5
Consumables – Stainless Steel/Aluminum (ArH2N2)
1
Hypertherm technology –
SilverLine electrodes and
CoolFlow™ nozzles
Centricut
part number
Reference
number
Alternate
reference
Description
.11.833.101.1550
.11.833.101.155
.11.833.101.156
.11.833.101.157
.11.833.101.158
.11.833.101.159
.11.833.121.261
.11.841.721.081
.11.833.121.271
.12.37790
.12.37780
.11.828.511.620
.12.40910
.11.828.911.550
.11.828.911.230
V4330
V4335
V4340
V4345
V4350
V4360
V502
T502
V522
V3000
A1
A3
A2
K5
V951
Swirl gas cap, 3.0 mm
Swirl gas cap, 3.5 mm
Swirl gas cap, 4.0 mm
Swirl gas cap, 4.5 mm
Swirl gas cap, 5.0 mm
Swirl gas cap, 6.0 mm
Protective cap
Protective cap
Swirl gas nozzle
Nozzle cap
CoolFlow™ nozzle, 1.5 mm, 120 amp, ArH2
CoolFlow nozzle, 2.0 mm, 180 amp, ArH2
CoolFlow nozzle, 2.3 mm, 300 amp, ArH2
Electrode, ArH2
Cooling tube
Centricut
part number
Reference
number
Alternate
reference
Description
027055
N/A
1 C117-550
C117-155
C117-156
C117-157
C53-158
C117-159
2 C117-261
C117-081
4 C117-1271
6 C53-790
8 C117-780*
C117-620*
C117-910*
11 C117-0550
C117-230
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maintenance items
O-ring lube
Pkg
qty
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
43www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Kjellberg® FineFocus®800, 900, PA-S70, PA-S75®
Torch: PB-S70/75/77®
Consumables
Centricut
part number
1 K53-1156
C53-158
2 C53-261
K53-160
3 K53-271
4 C53-790
5 C53-920*
C53-925*
C53-927*
C53-050
C53-850
6 C117-780*
C117-620*
C117-910*
7 C53-860
8 C53-1000*
C53-870
9 C117-0550
10
8
9
7
5
6
Reference
number
Alternate
reference
.11.833.111.156
.11.833.101.158
.11.833.101.261
.11.828.701.160
.11.833.101.271
.12.37790
.11.828.901.420
.11.828.901.425
.11.828.901.427
.12.43050
.12.40850
.12.37780
.11.828.511.620
.12.40910
.12.40860
.11.828.921.300
.12.40870
.11.828.911.550
V4540
V4350
V501
V521
V3000
L1-XL
L2-XL
L4-XL
L1
L2
A1
A3
A2
V101
K2-XL
K2
K5
Swirl gas cap, 4.0 mm
Swirl gas cap, 5.0 mm
Protection cap
Protection cap, PB-S75
Swirl gas nozzle
Nozzle cap
CoolFlow™ nozzle, 160 amp
CoolFlow nozzle, 250 amp
CoolFlow nozzle, 300 amp
Nozzle, 160 amp, Air
Nozzle, 250 amp, Air
CoolFlow, nozzle, 1.5 mm, 120 amp, ArH2
CoolFlow, nozzle, 2.0 mm, 180 amp, ArH2
CoolFlow, nozzle, 2.3 mm, 300 amp, ArH2
Gas guide
SilverLine® electrode, O2
Electrode, Air
Electrode, ArH2
Reference
number
Alternate
reference
Description
Description
Pkg
qty
10
1
1
10
10
1
1
1
1
5
5
1
1
1
1
1
5
1
Maintenance items
Centricut
part number
K53-923
K53-908
10 C117-230
K53-440
C23-001
027055
4
3
.10.505.923
.10.505.908
.11.828.911.230
.12.51440
N/A
V951
V931
O-ring, nozzle cap/torch seal, 28x2 mm
O-ring, nozzle/torch, 18x2 mm
Cooling tube PB-S75 ArH2
Cooling tube, PB-S75, Air
Removal tool, swirl ring
Lubricant .25 oz. (7 ml) tube
Pkg
qty
10
10
1
5
1
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
2
1
Hypertherm technology –
SilverLine electrodes and
CoolFlow™ nozzles
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
44www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Koike® Super-400 Plus®
System: Super-400 Plus®
Consumables
Centricut
part number
Reference
number
Description
40020503
40016366
40016359
40016362
40016360
40016363
40017233
40017234
40001899
40004567
40016358
Protection cap
Shield
CoolFlow™ nozzle, 1.7R
CoolFlow nozzle, 1.7L
CoolFlow nozzle, 2.3R
CoolFlow nozzle, 2.3L
CoolFlow nozzle, 2.9R
CoolFlow nozzle, 2.9L
Swirl ring, R
Swirl ring, L
SilverLine® electrode
Centricut
part number
Reference
number
Description
027055
N/A
Lubricant .25 oz. (7 ml) tube
1 C121-503
2 C121-366
3 C121-359*
C121-362*
C121-360*
C121-363*
C121-233*
C121-234*
4 C121-899
C121-567
5 C121-1058*
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
Maintenance items
5
Pkg
qty
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
4
3
2
1
Hypertherm technology –
SilverLine electrodes and
CoolFlow™ nozzles
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
45www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Komatsu® Rasor®40 amp
System: Rasor®40 amp
Consumables
Centricut
part number
5
Reference
number
Description
N/A
65-0432-001
65-0432-003
65-0432-002
65-0432-013
65-0432-006
65-0432-066
65-0432-021
65-0432-005
Cap #1 with tab
Cap #1
CoolFlow™ nozzle, O2, 0.4 mm
CoolFlow nozzle, O2, 0.6 mm
CoolFlow nozzle, O2, 0.7 mm
Swirler, standard, CCW
Swirler, reverse, CW
Ceramic guide
Electrode with o-ring
Centricut
part number
Reference
number
Description
C33-007
K33-010
K33-420
027055
65-0432-007
969-94-41010
65-0432-020
N/A
O-ring kit
Rasor 40 torch body
Rasor 40 torch body with 1.8 mm leads
Lubricant .25 oz. (7 ml) tube
C33-008T
1 C33-008
2 C33-140
C33-130
C33-160
3 C33-006
C33-066
4 C33-021
5 C33-930
4
3
Pkg
qty
1
1
5
5
5
1
1
1
5
Maintenance items
2*
1
Pkg
qty
3
1
1
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
Hypertherm technology –
CoolFlow™ nozzles
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
46www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Komatsu® Rasor®90/120 amp
System: Rasor®90/120 amp
Consumables
Centricut
part number
1 C35-016
2 C35-019
C35-905
C35-004
3 C35-540
4 C35-250
5 C35-015
C35-020
6 C35-160
C35-180
C35-002
C35-8002
C35-8003
7 C35-018
C35-003
8 C35-350
9 C35-1020*
10
9*
8
7
Reference
number
Description
65-0434-016
65-0434-019
65-0442-005
65-0438-004
65-0434-022
65-0442-004
65-0434-015
65-0438-005
65-0434-017
65-0434-007
65-0442-002
65-0438-002
65-0438-003
65-0434-018
65-0442-003
65-0434-020
65-0442-001
Cap #2
Shield cap, 90 amp
Shield cap, 120 amp
Shield cap, quicksilver
Spacer ring, 90 amp
Spacer ring, 120 amp
Cap #1
Cap #2, quicksilver
CoolFlow™ nozzle, O2, 0.8 mm
CoolFlow nozzle, O2, 1.1 mm
CoolFlow nozzle, O2, 1.3 mm
CoolFlow nozzle, “S”, 0.8 mm, quicksilver
CoolFlow nozzle, “S”, 1.1 mm, quicksilver
Swirler, 90 amp, CCW
Swirler, 120 amp, CW
Ceramic guide with o-ring
SilverLine® electrode, 90–120 amp
Reference
number
Description
65-0442-009
65-0434-021
65-0442-006
N/A
Cooling tube, 90/120 amp
O-ring kit
Rasor 90/120 torch body without o-rings
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
1
1
1
1
1
1
1
5
5
5
5
5
1
1
1
1
Maintenance items
6*
Centricut
part number
10 C35-110
K35-021
K35-006
027055
5
Pkg
qty
1
1
1
1
*Centricut part features a unique Hypertherm design that differs from the OEM design.
4
3
2
1
Hypertherm technology –
SilverLine electrodes and
CoolFlow™ nozzles
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
47www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Thermal Dynamics® PCH/M-150®
System: PAK® 15XC, MERLIN®
Consumables
Centricut
part number
Reference
number
Description
9-5790
9-5748
9-5747
9-5746
9-5766
9-5767
9-5751
9-5749
9-5760
Shield cup, copper
Tip, Air, .043, 50 amp
Tip, Air, .055, 100 amp
Tip, Air, .070, 150 amp
Tip, N2, .052, 100 amp
Tip, N2, .067, 150 amp
Tip, O2, .070, 150 amp
Electrode, Air
Electrode, O2
Centricut
part number
Reference
number
Description
C30-M33
027055
N/A
N/A
Liner, replacement
Lubricant .25 oz. (7 ml) tube
1 T30-790
2 C30-748
C30-747
C30-746
C30-766
C30-767
C30-751
3 C30-749
C30-760
3
Pkg
qty
1
5
5
5
5
5
5
5
5
Maintenance items
2
Pkg
qty
1
1
1
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
48www.hypertherm.com/centricut/plasma
Replacement parts suitable for:
Thermal Dynamics® Maximizer 300®
System: MERLIN® 3000, 6000, 6000GST
Consumables
Centricut
part number
6
5
1 C55-803
C55-804
C55-805
C55-006
T55-028
2 C55-002
T55-029
T55-412
T55-411
3 C55-030
C55-031
C55-032
C55-033
C55-034
T55-420
T55-433
4 C55-008
T55-009
T55-416
5 C55-710
4
C55-718
T55-017
T55-023
T55-025
T55-1211
3
2
1
Reference
number
20-1003
20-1004
20-1005
20-1006
20-1028
20-1002
20-1029
9-6412
9-6411
20-1030
20-1031
20-1032
20-1033
20-1034
9-6420
9-6433
20-0008
20-1009
9-6416
20-1016,
20-1010
20-1021
20-1015
20-1018
20-1017
20-1023
20-1025
20-1211
Description
Shield, 50 amp
Shield, 100–225 amp
Shield, 300 amp
Shield, 100–300 amp, underwater
Shield, 100–300 amp, underwater
Shield, cup body
Shield, cup body, underwater
Shield cup, Air, long
Shield cup, O2, long
Tip, 50 amp
Tip, 100 amp
Tip, 150 amp
Tip, 225 amp
Tip, 300 amp
Tip, O2, 0.59, 105 amp
Tip, O2, 0.70, 150 amp
Gas distributor, 50–225 amp
Gas distributor, 300 amp
Gas distributor
CopperLine® electrode, Air/O2, 50–300 amp
CopperLine electrode, Air/O2, 50–300 amp
Electrode, O2, 225 amp
Electrode, N2, 50–300 amp
Electrode, ArH2, 100–300 amp
Electrode, N2, ArH2
Pkg
qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
5
1
1
1
1
1
1
1
1
5
5
5
5
Maintenance items
Centricut
part number
6 T55-410
C55-004
C55-050
027055
Reference
number
Description
9-6410
N/A
N/A
N/A
Maximizer 300 torch body
O-ring
O-ring
Lubricant .25 oz. (7 ml) tube
Pkg
qty
1
5
5
1
Centricut is not affiliated with the named manufacturers. Reference to machines, parts, descriptions, and model numbers are for convenience in verifying
compatibility only. All parts are made by or for Centricut and are not made by the referenced manufacturers (unless expressly indicated). Centricut is a
registered trademark of Hypertherm, Inc. All other trademarks are the properties of their respective owners.
49www.hypertherm.com/centricut/plasma
P L A S M A | L A S E R | WAT E R J E T | A U TO M AT I O N | S O F T WA R E | C O N S U M A B L E S
For more information on Centricut products, visit
www.‌hypertherm.com/centricut
Hypertherm, Centricut, SilverLine and CoolFlow are trademarks of Hypertherm Inc., and may be registered in the United States and/or other countries.
All other trademarks are the property of their respective owners.
One of Hypertherm’s long-standing core values is a focus on minimizing our impact on the environment. Doing so is critical to our, and our customers’
success. We are always striving to become better environmental stewards; it is a process we care deeply about.
©6/2016 Hypertherm Inc. Revision 0
880940

Similar documents

Hit the Ground Running

Hit the Ground Running Hit the Ground Running GORDON GOODWIN

More information

Centricut® plasma torches and consumables for ESAB®

Centricut® plasma torches and consumables for ESAB® Nozzle insulator, 125 amp, PT-15XL Nozzle, O2, 260 amp Nozzle, O2, 300 amp Nozzle, O2, 300 amp (replaceable ceramic) Nozzle, O2, 340 – 360 amp Nozzle, O2, 340 – 360 amp, reverse Nozzle, O2, .099, 2...

More information

2013–2014 CO2 laser consumables

2013–2014 CO2 laser consumables Nozzle – 0.8 mm CP Nozzle – 0.8 mm CP (10 pack) Nozzle – 1.0 mm CP Nozzle – 1.0 mm CP (10 pack) Nozzle – 1.25 mm CP Nozzle – 1.25 mm CP (10 pack) Nozzle – 1.5 mm CP Nozzle – 1.5 mm CP (10 pack) Noz...

More information

Consumables for Kjellberg® systems

Consumables for Kjellberg® systems equal to or better than Kjellberg consumables

More information