PRODUCT OVERVIEW AND CD

Transcription

Custom HVAC Transducers
PRODUCT
OVERVIEW
AND
CD-ROM
CATALOG
Solving your signal interface needs
for over 25 years
14 West Vine Street -- Murray, Utah 84107
Phone (801) 262-6400 -- Fax (801) 261-3796
Toll free (800) 261-3602 -- Email: [email protected]
See our Web site -- www.atkinsonelectronics.com
PRODUCT APPLICATION CATALOG
PRODUCT CATEGORIES
SIGNAL ISOLATION DEVICES
SIA08
DIA08
DISM-E
-
1 CH PRECISION ISOLATION MODULE WITH ISOLATION TRANSFORMER . . . . . . . . . . . . . . . . 1
2 CH PRECISION ISOLATION MODULE WITH ISOLATION TRANSFORMER . . . . . . . . . . . . . . . . 1
2 CH 0-10V / 4-20mA ISOLATION MODULE WITH ISOLATION TRANSFORMER . . . . . . . . . . . . . 1
SIGNAL CONVERTERS AND SCALERS
ASM1
SBM
DCIM-SC
-
ANALOG SCALING MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SIGNAL BUFFER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SIGNAL CONVERTER AND SCALING MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SORM
VMAC
PACM
-
SIGNAL OVERRIDE MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
VOLTAGE TO mA CONVERTER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PROGRAMMED ANALOG SCALING MODULE (EMBEDDED CONTROLLER MODULE) . . . . . . . . 3
ASM2
DISM-D
DFCM
-
PHASE CUT TO ANALOG SCALING MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 CH PHASE CUT TO ANALOG ISOLATION MODULE WITH ISOLATION TRANSFORMER . . . . . 4
2 CH ANALOG INPUT TO FLOATING CONTROLLER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
DPCM
DSAM
SIA05A
-
2 CH ANALOG INPUT TO PWM CONTROLLER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2 CH ANALOG SIGNAL SEQUENCING MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PSI TO ANALOG SIGNAL CONVERTER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
SIA07A
UPAC-D
UPAC-CNT
-
6 INPUT HIGH/ LOW/ AVERAGE SIGNAL INTERFACE MODULE . . . . . . . . . . . . . . . . . . . . . . . . . 6
UNIVERSAL PULSE INPUT TO ANALOG CONVERTER (rev.D) . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PULSE COUNTER TO 4-20mA and 0-10V DC OR 0-5V DC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
UNIVERSAL INPUT AND SIGNAL CONVERTERS
UIPCM
UIPT
UIRO
-
UNIVERSAL INPUT TO PULSE CONVERTER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
UNIVERSAL INPUT TO PNEUMATIC TRANSDUCER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
UNIVERSAL INPUT TO RESISTANCE OUTPUT MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
ADJUSTABLE & FIXED VOLTAGE/CURRENT RELAYS
AVR1A
AVR4C
VRDC
-
ADJUSTABLE VOLTAGE SENSITIVE RELAY - ANALOG CONTROL . . . . . . . . . . . . . . . . . . . . . . . 8
ADJUSTABLE 4 CH. VOLTAGE SENSITIVE RELAYS - ANALOG CONTROL . . . . . . . . . . . . . . . . . 8
ADJUSTABLE DC VOLTAGE SENSITIVE RELAY- WITH TIME DELAY . . . . . . . . . . . . . . . . . . . . . . 8
PMR4
MCRM
LCRM
-
PWM TO MULTISTAGE RELAY MODULE (2/4 RELAYS) for DELTA BACstat II . . . . . . . . . . . . . . . 9
MULTI-CHANNEL RELAY MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
LOW CURRENT RELAY MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PRM
DPRM
-
PILOT RELAY MODULE 24VAC CONTROL VOLTAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
DUAL PILOT RELAY MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
MAGNETIC VALVE, PHASE CUT SIGNAL DRIVERS
DCIM-PCD
PCDO
SMVD
-
PHASE CUT SIGNAL DRIVER MODULE 27W, 40W, 80W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PHASE CUT DUAL OUTPUT MODULE 40W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
STAEFA MAGNETIC VALVE DRIVER 40W, 80W, & 120W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
S1Pi
DCIM-FP
-
STAEFA SMART 1 PROPORTIONAL INTERFACE MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
FLOATING & PWM INPUT TO PHASE CUT CONVERTER 27W, 40W, 80W . . . . . . . . . . . . . . . . . 12
SIGNAL INDICATION
DIM3
DIM3-LP
DIM3-RSP
-
DIGITAL INDICATION METER - PS +5, 6, 15VDC, & 24V AC (LCD OR LED) . . . . . . . . . . . . . . . . . 13
DIGITAL INDICATION METER - LOOP POWERED (LCD ONLY) . . . . . . . . . . . . . . . . . . . . . . . . . . 13
DIGITAL LCD METER WITH SM2 RESET POTENTIOMETER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
RH-LCD
RS-LCD
RS-2101D
-
DIGITAL INDICATION ROOM HOUSING - PS +5,15VDC, & 24V AC/DC (LCD) . . . . . . . . . . . . . . . 14
DIGITAL INDICATION ROOM SENSOR - PS +5,15VDC, & 24V AC/DC (LCD) . . . . . . . . . . . . . . . . 14
STAEFA DDC VERSION ROOM SENSOR WITH LCD DIGITAL DISPLAY . . . . . . . . . . . . . . . . . . . 14
ATKINSON ELECTRONICS, INC.
14 West Vine Street, Murray, UT 84107
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796, E-MAIL: [email protected]
www.atkinsonelectronics.com
REV 10/04
PRODUCT APPLICATION CATALOG
PRODUCT CATEGORIES
SENSORS - TRANSMITTERS
AD590
RS-DCP
VRWM
-
ANALOG DEVICES CURRENT TEMPERATURE SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
ROOM SENSOR - DUAL COMMUNICATION WALL SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
VANDAL RESISTANT, WALL MOUNT SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
UMATR
-
UNIVERSAL mA TRANSMITTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SPECIALTY CONTROLLERS & INTERFACE MODULES
WAM
-
WIRE ADDER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CRM2
HOA-100
HOA-102S
-
STAEFA SM2 CUSTOM RANGE MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4 CHANNEL 0-10VDC HAND-OFF-AUTO BOARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2 CHANNEL 0-10VDC HAND-OFF-AUTO BOARD W/ SWITCH STATUS . . . . . . . . . . . . . . . . . . . . 17
Di16CIB
ROSM
-
DIGITAL 16 CHANNEL ISOLATION BOARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DOOR ACTUATED ROOM OFFSET SWITCHING MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
POWER SUPPLY ISOLATION DEVICES
IPS-2/4
IPXFMR
DCPS
-
ISOLATED POWER SUPPLY 2 & 4 CHANNEL AC/DC ISOLATION . . . . . . . . . . . . . . . . . . . . . . . . 19
ISOLATED POWER TRANSFORMER 2, 4, & 6 CHANNEL AC ISOLATION . . . . . . . . . . . . . . . . . 19
DC POWER SUPPLY MODULE (NON ISOLATED) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
COMMUNICATION DEVICES INCLUDING LONWORKS
AETI-232
AETI-485
AETI-FO
-
SM2-TTL TO TTL TO RS-232 COMMUNICATION REPEATER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
SM2-TTL TO TTL TO RS-485 COMMUNICATION REPEATER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
SM2-TTL TO RS-485 TO FIBER OPTIC CABLE COMMUNICATION REPEATER . . . . . . . . . . . . . . 20
DRFB
FR485
-
DUAL CHANNEL RS-485 TO FIBER OPTIC COMMUNICATIONS MODULE . . . . . . . . . . . . . . . . . . 21
FIBER REPEATER 485 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
LNFR
PLFT24
RCM4
-
LONWORKS NETWORK FIBER OPTIC REPEATER, SINGLE & DUAL FIBER OUTPUTS . . . . . . . 22
POWER LINE TO FREE TOPOLOGY LONWORKS ROUTER 24V . . . . . . . . . . . . . . . . . . . . . . . . . 22
RELAY CONTROL MODULE, FREE TOPOLOGY & POWER LINE TRANSCEIVER . . . . . . . . . . . . 22
AUXILIARY PRODUCTS
NSFB
SNAP TRACK FUSE
-
NOISE SUPPRESSION & FILTER BOARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
RDI SNAP TRACK 2.125", 3", 3.25" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
LITTELFUSE 2AG SERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
JUMPERS
GAUGE KIT
VIP FB420I
AMP .1" SHUNT WITH HANDLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
0-30 PSI GAUGE KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
PNEUTRONICS 4-20mA TO 3-15PSI TRANSDUCER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
-
PRODUCT PRICING AND WARRANTY INFORMATION
PRICE LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
TERMS AND CONDITIONS OF SALE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
FOR COMPLETE PRODUCT INFORMATION, PLEASE REFER TO THE ENCLOSED CD OR VISIT OUR WEB SITE
AT www.atkinsonelectronics.com.
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796, E-MAIL: [email protected]
REV 10/04
2005 PRODUCT OVERVIEW
SIGNAL ISOLATION DEVICES
PRECISION SIGNAL ISOLATOR / CONVERTER MODULE
SIA08
FEATURES
v
v
v
v
Jumper selectable voltage/current input
On-board isolation transformer
4-20mA output will source a 750V impedance
Direct/Reverse jumper for output
APPLICATIONS
v
v
v
Precision signal isolation for EMS systems
VFD signal isolation
General signal input/output isolation
DESCRIPTION
The SIA08 is a precision, signal isolator module, that has an
Input/Output isolation of 2.5KV and onboard isolation
transformer. The Inputs/Outputs are jumper selectable.
DUAL PRECISION SIGNAL ISOLATOR / CONVERTER MODULE
DIA08
FEATURES
v
v
v
v
v
Dual channel input/output isolation
On-board isolation transformer
Jumper selectable voltage/current inputs & outputs
4-20 mA output will source a 600V
V impedance
Direct/Reverse jumper for each output
APPLICATIONS
v
v
v
Precision signal isolation for EMS systems
VFD signal isolation
Sequencing two 4-20 mA, 0-5V or 0-10V DC signals
from single analog signal
DESCRIPTION
The DIA08 is a two channel precision, signal isolator, that has
an Input/Output isolation of 2.5KV and onboard isolation
DUAL ISOLATED SIGNAL MODULE
DISM-E
FEATURES
v
v
v
v
v
2 channel isolated output
On-board isolation transformer & EMI noise filtering
Jumper selectable voltage/current output
4 to 20 mA output will source a 650V
V load
Built-in over-current protection
APPLICATIONS
v
v
v
0-10V DC and 4-20mA signal splitting or sequencing
2 channel signal isolator
Dual channel VFD driver
DESCRIPTION
The DISM-E is a two channel precision, signal isolator, that
has an Input/Output isolation of 2.5KV and onboard isolation
-1-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
E-MAIL: [email protected]
ANALOG SCALING MODULE
ASM1
FEATURES
v
v
v
v
v
24V AC operation
Output can sink input’s pull-up voltage
Optional Zero & Span potentiometers
Small size 1.10" by 2.19"
Two mounting options
APPLICATIONS
v
v
v
Analog 0 to 5V DC & 0 to 10V DC scaling
Rescale non - standard sensors
Rescale non - standard voltages
DESCRIPTION
The ASM1 is designed as an analog signal scaling module to
rescale control voltages or sensor signals to meet the input
requirements of various types of controllers.
SIGNAL BUFFER MODULE
SBM
FEATURES
v
v
v
Single or dual input option jumper
Four buffered outputs
2 3/16" Snap Track Mounting
APPLICATIONS
v
v
v
Master/slave configuration of a control signal for up
to five controllers
Master/slave configuration of two control signals for
two additional controllers
Signal buffering to four valve or damper actuators
DESCRIPTION
The SBM is a signal buffer module, two inputs with four
buffered outputs that track the input signal.
DCIM SIGNAL CONVERTER MODULE
DCIM-SC
FEATURES
v
v
v
v
v
Optically isolated inputs
Fused 24V AC power supply
Field adjustable output
Input & power LED indication
Optional minimum position pot
APPLICATIONS
v
v
v
v
Phase cut to mA/V DC
Scaling, inverting, sequencing
High/Low signal selection
VFD's, dampers, chiller reset
DESCRIPTION
The DCIM-SC is designed for conditioning 0 to 10V,
4 to 20mA, or converting Staefa’s phase cut signal to standard
0 to 10V, 4 to 20mA control signal.
-2-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
SIGNAL OVERRIDE MODULE
SORM
FEATURES
v
v
v
v
Analog 0 - 10V DC signal input/output
Minimum position override potentiometer
Freeze stat override input
2 3/16" Snap Track Mounting
APPLICATIONS
v
v
SM2 Plus outside damper control with minimum
position and lockout control
SM2 Plus reheat valve control with freeze stat
override
DESCRIPTION
The SORM is a dual function signal override module,
designed for Staefa’s SM2 Plus controller. It provides a
minimum position and freeze stat override capability.
ANALOG VOLTAGE TO mA CONVERTER MODULE
VMAC
FEATURES
v
v
v
v
24V AC or DC operation
Zero potentiometer
Two mounting options
APPLICATIONS
v
v
Coverts 0 - 10V DC to 4 - 20mA to drive HVAC
Actuators (see specifications for calibration)
NOT for VFD applications
DESCRIPTION
The VMAC is a voltage to 4 to 20mA converter module,
designed as a low cost signal converter for driving actuators
that use a 4-20mA input signal.
PROGRAMMABLE ANALOG CONTROL MODULE
PACM
FEATURES
v
v
v
Two channel conversion
Transformer isolation onboard
Isolated 24V AC for velocity sensor
APPLICATIONS
v
v
v
v
v
Velocity sensor conversions
Velocity sensor linearization
Square root extraction
Air quality control for roof top units
Multi-channel signal processing
DESCRIPTION
The PACM is a programed analog control module. It is
designed to accept multiple input signals and perform specific
functions (nonlinear signal conversions, square root extraction,
proportional control, etc.).
-3-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
ASM2
FEATURES
v
v
v
v
Optically isolated input
Zero & Span potentiometers
APPLICATIONS
v
v
v
Converts phase cut to drive valve or damper
actuators
Converts phase cut to drive most VFD’s
Provides phase cut isolation for multiple zone
valves
DESCRIPTION
The ASM2 is designed as a Staefa phase cut signal
converter module for interfacing to 0 to 5V or 0 to 10V DC
input devices.
DUAL ISOLATED SIGNAL MODULE
DISM-D
FEATURES
v
v
v
v
v
2 channel isolated output
On-board isolation transformer & EMI noise filtering
Jumper selectable voltage/current output
4 to 20 mA output will source a 650V
V load
Built-in over-current protection
APPLICATIONS
v
v
v
Phase cut to 0-10V DC / 4-20mA signal splitting or
sequencing
2 channel signal isolator
Dual channel VFD driver
DESCRIPTION
The DISM-D is a two channel precision, signal converter,
that has an Input/Output isolation of 2.5KV and onboard
isolation transformer. The outputs are jumper selectable.
DUAL CHANNEL FLOATING CONTROLLER MODULE
DFCM
FEATURES
v
v
v
v
Jumper selectable analog input
Jumper selectable output pulse timing
Two 24V AC tri-state triac outputs
Dual pipe system change-over option
APPLICATIONS
v
v
v
v
0 - 20 mA to tri-state floating
0 - 10V DC to tri-state floating
Phase cut to tri-state floating
Dual tri-state damper or valve operation
DESCRIPTION
The DFCM is a two channel analog to tri-state floating
controller module. It converts 0 to 10V, 0 to 20mA or phase
cut to a tri-state 24V AC output signal rated for 4 Amps.
-4-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
DUAL CHANNEL PWM CONTROLLER MODULE
DPCM
FEATURES
v
v
v
Jumper selectable output pulse timing
Two 24V AC PWM triac outputs
APPLICATIONS
v
v
v
v
0 - 20 mA to pulse width modulation
0 - 10V DC to pulse width modulation
Phase cut to pulse width modulation
Dual PWM valve or damper operation
DESCRIPTION
The DPCM is a two channel analog to PWM controller module.
It converts 0 to 10V, 0 to 20mA or phase cut to a pulse width
modulated 24V AC output signal rated for 4 Amps.
DUAL CHANNEL SEQUENCING ANALOG MODULE
DSAM
FEATURES
v
v
v
v
Dual channel phase cut to analog output
Dual channel voltage/mA to voltage output
Jumper selectable sequencing option
Direct or reverse options per output
APPLICATIONS
v
v
v
v
Dual phase cut to 0 to 10V DC conversion
Phase cut to sequenced 0 to 10V DC outputs
0 to 10V DC to sequenced 0 to 10V DC outputs
Dual 0 to 10V DC damper or valve operation
DESCRIPTION
The DSAM is a two channel analog sequencing module. It
sequences either 0 to 20mA or 0 to 10V DC input to two 0 to
10V DC outputs.
PRESSURE INPUT TO ANALOG OUTPUT MODULE
SIA05A
FEATURES
v
v
v
v
Measures differential & gauge pressures
Linear 4-20 mA & 0-10V DC outputs
External differential sensor inputs
Temperature compensation for accuracy
APPLICATIONS
v
v
v
Differential pressure monitoring
Pneumatic system monitoring
Pneumatic to analog conversion
DESCRIPTION
The SIA05A is a pressure to analog signal transducer
configured for differential pressure 3-15psi or 0-20psi. It
provides both a linear current and voltage output signals.
-5-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
SPECIAL FUNCTION ANALOG SIGNAL INTERFACE
SIA07A
FEATURES
v
v
v
v
6 simultaneous signal inputs
Second power supply for sensors, etc.
EMI noise filtering on outputs
ZERO and SPAN adjustments
APPLICATIONS
v
v
v
v
High/Low signal selection
Signal summing
Sensor averaging
Custom signal scaling
DESCRIPTION
The SIA07A is a multiple input, special function interface
module, designed to perform high and/or low signal selection,
averaging, or summing, of up to six (6) like analog signals. It
will provide a standard or custom voltage signal or 4-20 mA
signal output.
UNIVERSAL PULSE TO ANALOG CONVERTER MODULE
UPAC
FEATURES
v
v
v
v
v
Field selectable PWM, tri-state inputs
256 step resolution, no rollover
Timing calibrated to input signal
Input and power LED indication
APPLICATIONS
v
v
PWM or tri-state floating to analog conversion
DO Control of VFD’s or damper actuators
DESCRIPTION
The UPAC is an universal pulse to analog converter module,
designed to convert PWM or tri-state pulse signals to analog
0 to 10VDC, 0 to 5VDC or 4 to 20mA signals.
PULSE COUNTER TO ANALOG CONVERTER MODULE
UPAC-CNT
FEATURES
v
v
v
v
Field selectable input pulse per second
APPLICATIONS
v
v
v
Pulse per second to analog conversion
KW pulse meter to analog conversion
Flow pulse meter to analog conversion
DESCRIPTION
The UPAC-CNT is a customized application specific interface
module designed to convert pulse from KW, water or flow
meters to an analog signal.
-6-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
UNIVERSAL INPUT SIGNAL CONVERTERS
UNIVERSAL INPUT TO PULSE CONVERTER MODULE
UIPCM
FEATURES
v
v
v
v
Optional feedback input for closed loop control
DIP switch selectable input/output pulse types
Open collector or 24V AC triac output available
APPLICATIONS
v
v
v
0 - 20 mA & 0 - 10V DC to tri-state floating or PWM
PWM to tri-state floating
Phase cut to tri-state floating or PWM
DESCRIPTION
The UIPCM accepts all standard analog, pulse, and phase cut
signals and converts them to a PWM or tri-state floating AC or
DC voltage outputs. Optional feedback input available.
UNIVERSAL INPUT TO PNEUMATIC TRANSDUCER MODULE
UIPT
FEATURES
v
v
v
v
v
v
v
Non-bleed device (no air usage in steady state)
Internal accurate closed loop control
DIP switch selectable pulse & phase cut inputs,
direct or reverse action
Jumper selectable analog inputs
Does not require instrument quality air
Manual positioning adjustment
Optional bleed or maintained output on power loss
APPLICATIONS
v
v
v
0 to 20 mA or 0 to 10 V to pneumatic
PWM or tri-state floating to pneumatic
Phase cut to pneumatic
DESCRIPTION
The UIPT accepts all standard analog, pulse and phase cut
signals and converts them into a 3 to 15 psi pressure output
signal. Optional feedback output available.
UNIVERSAL INPUT TO RESISTANCE OUTPUT MODULE
UIRO
FEATURES
v
v
v
v
DIP switch selectable input type & time bases
256 step output resolution
Field changeable resistance output module
APPLICATIONS
v
v
0 - 20mA, 0 - 10V, and phase cut to resistance
PWM and tri-state floating to resistance
DESCRIPTION
The UIRO accepts all standard analog, pulse, and phase cut
input signals and converts them to a linear 256 step
resistance output. Resistance module field changeable.
-7-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
ADJUSTABLE & FIXED VOLTAGE RELAYS
ADJUSTABLE VOLTAGE SENSITIVE RELAY
AVR1A
FEATURES
v
v
v
v
v
Linear operation
12A/250V AC contacts
Single-turn or multi-turn adjustment pots
Jumper selectable input
LED relay position indication
APPLICATIONS
v
v
v
v
Analog to on/off conversion
Differential control
Analog signal alarms
Low/High limit set points
DESCRIPTION
The AVR1A is an adjustable voltage/current relay. It is
designed to provide adjustable trip on/off points on a SPDT
relay with contacts rated for 12 Amps 250V AC.
FOUR CHANNEL ADJUSTABLE VOLTAGE SENSITIVE RELAY
AVR4C
FEATURES
v
v
v
v
v
Linear operation
12A/120V AC contacts
Four channel for staging
Jumper selectable input
APPLICATIONS
v
v
v
v
Analog to on/off control
Four step staging control
Analog signal alarms
Low/High limit set points
DESCRIPTION
The AVR4C is a 4 channel adjustable voltage/current relay. It
is designed to provide adjustable trip on/off points on four
SPDT relays with contacts rated for 12 Amps 120V AC.
ADJUSTABLE VOLTAGE SENSITIVE RELAY MODULE WITH TIME DELAY
VRDC
FEATURES
v
v
v
v
v
Operates over 10 to 35V DC range and 24V AC
Adjustable thresholds for cut-in and cut-out points
12 Amp SPDT relay contact
Reversible action with the cut-in, cut-out settings
Adjustable time delay 0 to 255 sec. on cut-in
APPLICATIONS
v
v
v
v
Low voltage cutoff and generator control
HVAC heating & cooling staging
Hydro-electric power shunt
Battery charge controller
DESCRIPTION
The VRDC is an adjustable DC voltage relay module,
designed for applications where a varying DC voltage is used
to switch a relay, such as in generator control.
-8-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
PULSE WIDTH MODULATION MULTISTAGE RELAY
PMR4
FEATURES
v
v
v
v
Linear staging operation
12A/120V AC relay contacts
APPLICATIONS
v
v
v
PWM to on/off control
Two stage heating, two stage cooling
Four step staging control
DESCRIPTION
The PMR4 is a pulse to relay output module designed to
work with Delta’s BACstat II DNT-T Series Controllers or
other PWM output controllers. It converts standard PWM
timing range signals to relay outputs.
MULTIPLE CHANNEL SPDT RELAY MODULE
MCRM
FEATURES
v
v
v
v
v
10 channels of SPDT relays
LED indication for each relay
.187" Spade termination
Small size (2.187" X 8.0")
APPLICATIONS
v
v
Voltage/current signal switching
Indication lamp status switching
DESCRIPTION
The MCRM is a ten channel SPDT relay module. Each relay
channel has LED indication, input termination and relay
contact terminations. It is available in a 1 Amp rated relay
(MCRM-1) or a 10 Amp rated relay (MCRM-10) .
LOW CURRENT RELAY MODULE
LCRM
FEATURES
v
v
v
v
v
Analog signal conversion to SPDT contact
12Amp/120V AC rated contacts
APPLICATIONS
v
v
v
Analog conversion to on/off control
Analog lighting control
Remote fan start - stop control
DESCRIPTION
The LCRM is a low current voltage relay module. It is designed
to allow a switched voltage signal to trigger a SPDT relay. It
has a relay output rated at 12A @ 120V AC.
-9-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
PILOT RELAY MODULE
PRM
FEATURES
v
v
v
v
12Amp/120V AC rated contacts
LED relay indication
APPLICATIONS
v
v
v
v
Remote mounted control relay
Maintain low voltage panel requirements
Remote fan start - stop control
Status feedback relay
DESCRIPTION
The PRM is a 24V AC/DC Pilot Relay Module. A green LED
indicates when the relay is energized. The PRM uses a SPDT
relay output rated at 12A @ 120V AC.
DUAL PILOT RELAY MODULE
DPRM
FEATURES
v
v
v
v
15 Amp/120V AC rated contacts
Two pilot relays in one enclosure
APPLICATIONS
v
v
v
Remote mounted control relays
Maintain low voltage panel requirements
Status feedback relay
DESCRIPTION
The DPRM is a dual pilot relay module that accepts 24V
AC/DC control signals and provides SPDT (form C) relay
contact outputs rated at 15A @ 120V AC and 15A @ 28V DC.
-10-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
PHASE CUT SIGNAL DRIVERS
PHASE CUT SIGNAL DRIVER MODULE
DCIM-PCD
FEATURES
v
v
v
v
Input to output isolation
27, 40, or 80 watts output power
APPLICATIONS
v
v
v
v
v
mA/V DC to phase cut conversion
DDC control of Staefa magnetic valves
Phase cut signal scaling & sequencing
High or low signal selection
Minimum position override
DESCRIPTION
The DCIM-PCD is designed for converting 0 to 10V DC or
4 to 20mA signals to Staefa’s phase cut signal for driving
magnetic valves and damper actuators.
DUAL PHASE CUT SIGNAL DRIVER MODULE
PCDO
FEATURES
v
v
v
v
v
Two channel output
Isolated phase cut inputs
Isolated milliamp inputs
High reliability mosfet outputs
On-board fuse protection
APPLICATIONS
v
v
v
v
Signal splitting
Dual valve driver
Same signal sequencing
One or two channel mA or DC to phase-cut
DESCRIPTION
The PCDO is a two channel 40W phase cut driver module, that
converts 0 to 10V, 4 to 20mA signal to the Staefa phase cut
signal for driving magnetic valves and damper actuators.
STAEFA MAGNETIC VALVE DRIVER MODULE
SMVD
FEATURES
v
v
v
v
v
High reliability
40, 80 or 120 watt power ratings
Universal analog input
Optically isolated phase cut input
Lower operating temperature
APPLICATIONS
v
v
v
v
Phase cut amplification
Milliamp & DC input to phase cut output
Valve sequencing from same signal
Isolated milliamp input valve driver
DESCRIPTION
The SMVD is designed to drive Staefa’s large magnetic valves.
It is available as a phase cut amplifier or as a 0 to 10V DC/420mA converter module.
-11-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
PHASE CUT SIGNAL DRIVERS
STAEFA SMART 1 PROPORTIONAL INTERFACE MODULE
S1Pi
FEATURES
v
v
v
v
v
Direct replacement for Staefa’s Smart 1 SMPI
Mounts on original SMPI 4" sq. plate
27, 40, or 80 watts output power options
Minimum position or manual potentiometer
APPLICATIONS
v
v
v
Replacement for Staefa’s SMPI valve driver
0 to 20mA to phase cut conversion
0 to 10V DC to phase cut conversion
DESCRIPTION
The S1Pi (Smart 1 Proportional Interface Module) is a direct
replacement part for Staefa’s SMPI (Smart 1 Proportional
Interface). It interfaces between SM1 controller and zone valve.
DCIM PULSE TO PHASE CUT CONVERTER MODULE
DCIM-FP
FEATURES
v
v
v
v
v
v
Field selectable PWM, tri-state inputs
Short resistant mosfet output
APPLICATIONS
v
v
v
Pulse width modulation to phase cut
Tri-state floating to phase cut
DO Control of Staefa mag valves & actuators
DESCRIPTION
The DCIM-FP is designed for converting PWM or tri-state pulse
signals to Staefa’s phase cut signal for driving Staefa’s
magnetic valves and damper actuators.
-12-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
SIGNAL INDICATION DEVICES
DIGITAL INDICATION METER
DIM3
FEATURES
v
v
v
v
Easy to read numbers
On-board power supply
Field calibration adjustments
Ordering choice of LCD or LED display
APPLICATIONS
v
v
v
v
Temperature indication
Humidity indication
Percentage of operation display
Differential pressure indication
DESCRIPTION
The DIM3 is a 3½ digit panel meter that can be ordered in
either a LCD or LED version. It consists of Datel’s DMS-30
meter and a sub board for sensor or voltage input signal
scaling.
DIGITAL INDICATION METER
DIM3-LP
LOOP POWERED
FEATURES
v
v
v
v
Easy to read numbers
Loop powered; no external supply required
Field calibration adjustments
Compact size
APPLICATIONS
v
v
v
v
Humidity indication
Percentage of operation display
Differential pressure indication
DESCRIPTION
The DIM3-LP is a 3½ digit LCD panel meter that is loop
powered. It consists of Datel’s DMS-30LCD meter and a sub
board for input signal scaling and powering the LCD display.
DIGITAL INDICATION METER WITH SET POINT POTENTIOMETER
DIM3-RSP
FEATURES
v
v
v
v
v
v
Easy to read 3½ digit display
Choice of LCD or LED display
Optional power supply for 24V AC/DC operation
Remote set point potentiometer
Push button for set point display
User friendly calibration adjustments
APPLICATIONS
v
Remote set point potentiometer with display
DESCRIPTION
The DIM3-RSP is a 3½ digit panel meter that can be ordered
in either a LCD or LED version. It consists of Datel’s DMS-30
meter and a sub board with remote set-point potentiometer,
and push button for viewing set-point value while setting.
-13-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
SIGNAL INDICATION DEVICES
ROOM HOUSING WITH LCD DISPLAY
RH-LCD
FEATURES
v
v
v
v
v
3 digit LCD display
Display calibration pot
Universal mount
Neutral styling
Mounting ring optional (from Staefa)
APPLICATIONS
v
v
Humidity indication
DESCRIPTION
The RH-LCD is a 3 digit LCD display mounted in a Staefa
Room Housing. It is designed to accept a voltage signal and
display an output range 0 to 100 or to 999 for RH sensors or
various temperature sensors.
ROOM SENSOR WITH LCD DISPLAY
RS-LCD
FEATURES
v
v
v
v
v
v
v
3 digit LCD display with temperature sensor
Display & sensor calibration pots
Set point & override switches (optional)
8F & 8C selection switch
Service tool jack
Custom face plates available upon request
APPLICATIONS
v Smart II room sensor w/temperature display
v
v
SMVU room sensor w/temperature display
RS room sensor w/temperature display
DESCRIPTION
The RSXXXXD is a Staefa Room Sensor with a LCD display.
It is designed to provide a visual display of the room
temperature. Standard options available.
ROOM SENSOR WITH LCD DISPLAY FOR SM2-DDC
RS-2101D
FEATURES
v
v
v
v
v
v
v
3 digit LCD display with thermistor sensor
Display & sensor calibration pots
Override switch (optional)
8F & 8C selection switch
Service tool jack
Custom face plates available upon request
APPLICATIONS
v Smart II DDC room sensor w/temperature display
DESCRIPTION
The RS-2101D is a Staefa Smart 2 DDC Room Sensor with
LCD display. It is designed to provide a visual display of the
room temperature. Standard options available.
-14-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
ANALOG DEVICES TEMPERATURE SENSOR
AD590
FEATURES
v
v
v
v
v
v
Linear current output 1m
m A/K
Wide range -5588C to 15088C
Two-terminal device: voltage in/current out
Laser trimmed to 62.588C accuracy
Linearity: 6.888C over full range (AD590K)
Wide power supply range: +4V to 30V
APPLICATIONS
v
v
Accurate temperature measurement and control
OSA, hot /chilled water temperature sensing
DESCRIPTION
The AD590 is a two wire linear temperature sensor that
produces a linear current output 1m A/8K. The AD590 comes
with 12" leads. Duct and well mounting available.
ROOM SENSOR - DUAL COMMUNICATION WALL SENSOR
RS-DCP
FEATURES
v
v
v
Dual temperature sensors
Dual communication jacks
Universal mount, mounting ring optional
APPLICATIONS
v
Dual Smart II communications port & sensors in
single wall housing to serve two Smart II VAV zone
controllers where one location is specified
DESCRIPTION
The RS-DCP (Dual Communications Port) is used with the
SMART II Controller in zone temperature control
applications. In addition to two temperature sensors,
separate communication jacks are provided for the two
Staefa controllers.
VANDAL RESISTANT WALL MOUNT SENSOR
VRWM
FEATURES
v
v
v
v
Vandal resistant stainless steel
Easy mounting to single gang box
Neutral appearance
Standard or custom sensors
APPLICATIONS
v
Room sensor for schools, correctional facilities, or
any other public areas
DESCRIPTION
The VRWM is a vandal resistant wall mount sensor, that
contains one of several standard temperature sensors. It
consists of a standard single gang stainless steel plate with
the desired sensor mounted with thermal compound inside.
A plexiglass backing is then permanently attached.
-15-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
UNIVERSAL 2-WIRE CURRENT LOOP TRANSMITTER
UMATR
FEATURES
v
v
v
v
Easy mounting to single gang box
Accepts standard or custom sensors
Wide power supply range 12 to 40V DC
Field calibration potentiometers provided
APPLICATIONS
v
v
v
v
Transmit temperature signals long distances
Narrow temperature ranges
Voltage to 4-20mA loop conversion
Remote temperature sensing
DESCRIPTION
The UMATR is a 2-wire, 4 to 20mA, transmitter designed to
convert RTD’s, AD590's, thermistors and other low level
signals to a 4 to 20mA current loop signal. Loop Powered.
SPECIALTY CONTROLLERS & INTERFACES
WIRE ADDER MODULE
WAM
FEATURES
v
v
Easily mounts in furnace control box
Output LED indication for fan, heating & cooling
APPLICATIONS
v
The WAM allows HVAC contractors to reuse the
existing 2-wire thermostat cable on air conditioning
and furnace retrofits where installing a 4-wire cable
would be required
DESCRIPTION
The WAM allows you to use a battery powered electronic
thermostat and the existing two wires to save pulling a new
cable on those impossible A/C add-on jobs. The signal
combiner mounts in the thermostat, sends the heating, cooling
and fan signals to the WAM mounted in the furnace. The
WAM contacts pull in the heating, cooling and fan relays.
-16-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
CUSTOM RANGE MODULE FOR SMART II
CRM2
FEATURES
v
v
v
v
100 % Staefa Smart II compatible
Factory can customize for most applications
Provides pull-up or load resistor for temperature
sensors or current transmitters
Voltage divider for 0 to 10V signals
APPLICATIONS
v
v
v
Retrofits involving non Staefa sensors
Narrow temperature ranges for chilled and/or hot
water control loops
Narrowing range of 4-20mA transducers
DESCRIPTION
The purpose of the CRM2 is to provide additional ranges for
Staefa sensors and enable other types of sensors to be used
with the Smart II and Smart II Plus controllers.
HAND-OFF-AUTO BOARD
HOA-100
FEATURES
v
v
v
v
Buffered manual output signal
2 3/16" snap track mounting
Standoff mounting
4 independent channels
APPLICATIONS
v
v
Damper signal override
Hand-Off-Auto switching of control signals
DESCRIPTION
The HOA-100 is a 4 channel hand-off-auto board designed
to pass a voltage signal in auto mode or provide an op-amp
buffered adjustable voltage signal in hand mode.
HAND-OFF-AUTO BOARD W/ STATUS FEEDBACK
HOA-102S
FEATURES
v
v
v
v
v
Buffered manual output signal
Buffered status output signal
2 3/16" snap track mounting
Standoff mounting
2 independent channels
APPLICATIONS
v
v
Damper signal override
Hand-Off-Auto switching of control signals
DESCRIPTION
The HOA-102S is a 2 channel hand-off-auto board designed to
pass a voltage signal in auto mode or provide an op-amp
buffered adjustable voltage signal in hand mode.
-17-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
DIGITAL 16 CHANNEL ISOLATION BOARD
Di16CIB
FEATURES
v
v
v
Input to output isolation
24V AC/DC input to DC open collector output
Input LED indication
APPLICATIONS
v
v
Monitor 24V AC digital signals with isolation
Data acquisition of Htg/Clg signals using Delta’s
DSC-1616 Controller
DESCRIPTION
The Di16CIB is designed to provide both signal conversion
(AC to DC open collector) and input to output signal
isolation.
DOOR ACTUATED ROOM OFFSET SWITCHING MODULE
ROSM
FEATURES
v
v
v
v
Four selectable Supply CFM voltage settings with
switch position feedback value
Supply CFM offset activated by N.O. door switch
Two adjustable exhaust CFM voltage outputs
Set-up jumper to simulate door for easy output
configuration
APPLICATIONS
v
Constant volume lab with Phoenix Supply/Exhaust
values with door offset
DESCRIPTION
The ROSM is designed to provide an additional level of
containment in either a negative or positive pressure
laboratory environment.
-18-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
POWER SUPPLY ISOLATION DEVICES
ISOLATION AC/DC POWER SUPPLY MODULE
IPS-2/4
FEATURES
v
v
v
v
v
Transformer isolation
Selectable voltage outputs
Thermal overload protected
Fused outputs
Snap track mounted
APPLICATIONS
v
v
v
AC power isolation
Isolated DC power supply, ± DC power supply
2, 3 & 4 wire transmitter supply
DESCRIPTION
The IPS-2, or IPS-4 is a multi channel isolation AC/DC
power supply designed to provide isolated 24V AC and
adjustable DC voltages for powering peripheral devices.
ISOLATION AC POWER SUPPLY MODULE
IPXFMR
FEATURES
v
v
v
v
v
Each 24V AC output is isolated
Available in 2, 4 and 6 outputs
Available with 24V or 110V AC primary
Fuse protection on primary
Snap track mounted
APPLICATIONS
v
v
v
24V AC isolation power supply
Provide 24V AC isolation between full-wave
and half-wave bridge devices
Eliminate ground loops
DESCRIPTION
The IPXFMR is a multiple output isolated AC power supply
designed to provide up to six (6) 24V AC isolated outputs, for
powering peripheral devices.
DC POWER SUPPLY MODULE
DCPS
FEATURES
v
v
v
v
Adjustable output voltage
Thermal overload protected
Accepts either 24V AC or DC
Snap track mounted
APPLICATIONS
v
v
v
Power stand-alone sensors
Power 4 to 20mA transmitters
Power panel meters
DESCRIPTION
The DCPS is an adjustable DC power supply designed to
convert 24V AC to a DC voltage. It offers both half-wave
and full-wave bridge rectification circuits as standard
features. (LVR voltage range 4.5V to 17V DC, HVR range
13V to 26V DC)
-19-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
COMMUNICATION DEVICES
ATKINSON ELECTRONICS SM2 TRUNK INTERFACE - RS-232
AETI-232
FEATURES
v
v
v
v
Two Staefa SM2 TTL repeater ports
Staefa’s SM2 TTL communication to RS-232
Small enough to mount inside a 4" sq. handy box
APPLICATIONS
v
v
Convert Staefa’s Talon Network Manager’s RS-232
to Staefa’s SM2 TTL communication format
Convert Tridium’s Network Manager’s RS-232 to
Staefa’s SM2 TTL communication format
DESCRIPTION
The AETI-232 is a TTL to RS-232 repeater/converter module
that is designed to extend or expand the capacity of Staefa’s
TTL communication trunks.
ATKINSON ELECTRONICS SM2 TRUNK INTERFACE - RS-485
AETI-485
FEATURES
v
v
v
v
Two Staefa SM2 TTL repeater ports
Staefa’s SM2 TTL communication to RS-485
Small enough to mount inside a 4" sq. handy box
APPLICATIONS
v
v
v
Extend Staefa’s SM2 TTL communication trunk
Convert Staefa’s SM2 TTL communication to RS-485
communication trunk
Convert Staefa’s RS-485 communication trunk to
Staefa’s SM2 TTL communication trunk
DESCRIPTION
The AETI-485 is a TTL to RS-485 repeater/converter module
that is designed to extend or expand the capacity of Staefa’s
TTL communication trunks.
ATKINSON ELECTRONICS SM2 TRUNK INTERFACE - FIBER OPTIC
AETI-FO
FEATURES
v
v
v
v
v
One Staefa SM2 TTL trunk I/O
One Staefa NCRS RS-485 trunk I/O
One Transmit/Receive fiber optic I/O
Selectable distance settings for fiber transmitter
APPLICATIONS
v
v
Extend Staefa’s trunk communications between
buildings via RS-485 or fiber optic cable
Convert Staefa’s communication trunk to a fiber
optic (non electrical) serial communication trunk
DESCRIPTION
The AETI-FO is a fiber optic repeater module. It accepts
Staefa’s TTL and RS-485 communication trunks and transmits
and receives on two 62.5/125mm fiber optic cables.
-20-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
COMMUNICATION DEVICES
DUAL RS-485 TO FIBER OPTIC INTERFACE
DRFB
FEATURES
v
v
v
Two Staefa NCRS type RS-485 LAN/ trunk I/Os
Two Transmit/Receive fiber optic I/Os
APPLICATIONS
v
Extend Staefa’s LAN trunk between buildings via
fiber optic cable
DESCRIPTION
The DRFB is a RS-485 to fiber optic convertor module. It is
designed to extend Staefa’s NCRS RS-485 LAN connections
beyond that of standard wire connection lengths.
RS-485 TO FIBER OPTIC REPEATER
FR485
FEATURES
v
v
v
v
v
v
RS-485 to Multi-Mode fiber
One or Two fiber optic channels
19.2 to 78+K baud rates
Transparent repeater function
Optical signal regeneration
LED signal indication
APPLICATIONS
v
v
v
v
v
RS-485 Bacnet or proprietary serial trunks
Twisted pair to fiber optic communications
Electrical noise immunity between buildings by
utilizing fiber
Extends network up to 2.5Km
Hub or single point to fiber compatible
DESCRIPTION
The FR485 is a RS-485 to fiber optic convertor module
available as a single fiber pair output repeater or dual fiber pair
output repeater.
-21-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
LONWORKSs
LONWORKSs
s NETWORK FIBER OPTIC REPEATER
LNFR
FEATURES
v
v
v
v
v
LonWorkss FTT-10A Free Topology to Multi-Mode fiber
Transparent repeater function
LED signal indication
One or two fiber optic channels
Supports Ring, Bus, and Point to Point topologies
APPLICATIONS
v
v
v
Twisted pair to fiber optic communications
Electric noise immunity
Extends network up to 2.5Km
DESCRIPTION
The LNFR is a twisted pair to fiber optic repeater which is
transparent to the network and allows multiple free topology
networks to be connected over greater distances.
24V POWER LINE TO FREE TOPOLOGY LONWORKSs ROUTER
PLFT24
FEATURES
v
v
v
v
v
Connects twisted pair nodes to 24V AC power line system
Implements standard LonWorkss router functions:
configured, learning, bridge & repeater
Echelons router core, PLT22 & FTT-10A transceivers
LED communication indication: band in use, packet
detect, near and far service pin
24V AC line -to-neutral transformer isolated coupling
APPLICATIONS
v
Free topology to 24V AC power line communication as a
configured router, bridge or repeater
DESCRIPTION
The PLFT24 connects LonWorkss twisted pair networks to
LonWorkss power line networks operating at 24 Volts AC.
RELAY CONTROL MODULE
RCM4
FEATURES
v
v
v
v
v
v
Optional: FTT-10A Free Topology Transceiver or
PLT-22 Power Line Transceiver communication
Four Relay outputs: 1 Amp contact or voltage switching
One optically isolated digital input
Encapsulated for wet environments
Includes input for rain or soil moisture sensor
APPLICATIONS
v
v
v
Underground sprinkler valve control
Network load control: valves, pumps, fans, etc.
Digital outputs for remote indication
DESCRIPTION
The RCM4 is a single input, four relay output LON node. It can be
used in applications which require remote network control of two
position loads such as pumps, fans, valves, sprinkler valves.
-22-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
AUXILIARY PRODUCTS
NOISE SUPPRESSION & FILTER BOARD
NSFB
FEATURES
v
v
v
Dual channel noise filtering
Two types of noise filtration technics used:
1 DC common mode choke coils
1 EMI suppression filter capacitors
EMI noise reduction on frequencies between 10KHz
to 1MHz
APPLICATIONS
v
v
Noise radiated from the inputs of some VFDs
Filter control signals that have picked up noise
radiated from electrical or RF equipment
DESCRIPTION
The NSFB is a dual channel noise suppression filter board that
uses passive filtration technics to filter noise coming from the
input of VFDs, electrical or RF equipment.
RDI SNAP TRACK
SNAP TRACK
STOCKED SIZES
v
v
v
v
8TK2-24
8TK-48
TK2-24
TK2-48
2.187"W x 24"L
2.187"W x 48"L
3.0"W x 24"L
3.0"W x 48"L
LITTLEFUSE - 2 AG CARTRIDGE FUSE
FUSE
STOCKED SIZES
v
v
v
v
v
v
v
v
225.250
225.500
225.750
225 001
225 01.5
225 002
225 003
225 006
¼ amp.
½ amp.
¾ amp.
1 amp.
1½ amp.
2 amp.
3 amp.
6 amp.
Shipped 5 fuses per package
-23-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
AUXILIARY PRODUCTS
SHORTING JUMPERS OR SHUNTS
SHUNTS
PART NUMBER
v
AMP #881545-4 .1" pin spacing
Shipped 5 shunts per package
3 - 15 PSI GAUGE KIT
GAUGE KIT
KIT CONTAINS:
v
v
v
v
DC-1401
0 TO 30 PSI gauge
N4-135-1
Parker gauge tee
Mounting block for Pneutronics VIP transducer
3" long
¼ tubing
PNEUTRONICS 4-20MA PNEUMATIC TRANSDUCER
FEATURES
v
v
v
v
v
VIP-F-B/420I/315PSI
DISCONTINUED
Non-bleed device (no air consumption in steady
state) 3-15 PSI adjustable
Jumper selectable analog inputs
Field calibration pots
Optional pressure feedback signal
Unaffected by mounting position
APPLICATIONS
v
v
4 to 20 mA to pneumatic
1 to 5V to pneumatic
REPLACED BY UIPT
DESCRIPTION
The Pneutronics VIP-F-B/420I/315PSI is a 4 to 20mA or
1 to 5V DC to 3 to 15 PSI pneumatic transducer.
-24-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
ATKINSON ELECTRONICS, INC. PRODUCT CATALOG
PRICE LIST
PRICES EFFECTIVE NOVEMBER 1, 2004
LIST PRICE
AD590-D
AD590-P
AD590-W
-
TEMPERATURE SENSOR W/ 8" DUCT PROBE
TEMPERATURE SENSOR W/12" PIGTAILS
TEMPERATURE SENSOR W/ 3" WELL
27.00
15.00
37.00
AETI-232 /TTL2
AETI-485 /TTL1
AETI-485 /TTL2
AETI-FO /TTL1/RS-485
-
SM2-TTL TO TTL TO RS-232 COMMUNICATION REPEATER
SM2-TTL TO RS-485 COMMUNICATION REPEATER
SM2-TTL TO TTL TO RS-485 COMMUNICATION REPEATER
SM2-TTL TO RS-485 TO FIBER OPTIC COMMUNICATION REPEATER
ASM1 /XXX/XXX/X
ASM2 /PC/XXX
-
(ANY ‘S’ VERSION, CALL FOR ‘P’ VERSION)
PHASE CUT TO 0 - 5V OR 0 - 10V DC CONVERTER MODULE
AVR1 /PC
AVR1A /SEL/X/XX
AVR4A /XX-XX
AVR4A /XXX/2CH
AVR4A /XXX/3CH
-
0 - 20V PHASE CUT INPUT TO 1 SPDT RELAY
VOLTAGE/CURRENT INPUT TO 1 SPDT RELAY
(ANY VERSION)
DUAL SIGNAL INPUTS TO 4 SPDT RELAYS
(ANY VERSION)
SINGLE VDC, mA, OR PC INPUT TO 2 SPDT RELAYS
SINGLE VDC, mA, OR PC INPUT TO 3 SPDT RELAYS
CRM2 /XXXX/XX
CRM2 /CUSTOM
-
SM2 STANDARD INPUT RANGE MODULES
SM2 CUSTOM RANGE MODULE
DCIM-FP /PCX-X
-
PULSED INPUTS TO PHASE CUT OUTPUT 27,40,80 WATT VERSIONS
DCIM-PCD /MA/PCX-X
DCIM-PCD/2MA/PCX-X
DCIM-PCD /PC/PCX-X
DCIM-PCD /2PC/PCX-X
DCIM-PCD /PCX-AMP
DCIM-PCD /135V/PCX-X
-
4 - 20mA, 0 - 10V DC INPUTS TO PHASE CUT OUTPUT 27,40,80 WATT
80.00
(2) 4 - 20mA OPTO INPUTS FUNCTION., TO PHASE CUT OUT 27,40,80 WATT
124.00
10-90% PHASE CUT, 0 - 10V DC INPUTS TO PHASE CUT OUTPUT 27,40,80 WATT 80.00
(2) PHASE CUT OPTO INPUTS FUNCTION., TO PHASE CUT OUT 27,40,80 WATT
118.00
PHASE CUT AMPLIFIER MODULE 27,40,80 WATT
54.00
135 OHM INPUT TO PHASE CUT OUTPUT 27 WATT
94.00
DCIM-SC /PC-VDC/-X
DCIM-SC /MA-VDC/-X
DCIM-SC /135V/MA
DCIM-SC /135V/VDC
p
u
l
n
PHASE CUT, 0 - 10V DC INPUTS TO VOLTAGE OR 4 - 20mA OUTPUT
4 - 20mA, 0 - 10V DC INPUTS TO VOLTAGE OR 4 - 20mA OUTPUT
135 OHM INPUT TO 4 - 20mA OUTPUT
135 OHM INPUT TO VOLTAGE OUTPUT
DCPS /XVR
-
DC POWER SUPPLY (L = 4.5V - 17VDC, H = 13.5V - 26VDC) OUTPUT
30.00
DFCM /XX
DFCM /XX/ICO
DPCM /XX/PWM
-
DUAL CHANNEL 3 PT FLOATING 24V AC OUTPUT MODULE
DUAL CHANNEL 3 PT FLOATING 24V AC OUTPUT MODULE w/CHANGE-OVER
DUAL CHANNEL PWM 24V AC OUTPUT MODULE
85.00
95.00
80.00
Di16CIB/X
-
DIGITAL 16 CHANNEL ISOLATION BOARD
100.00
DIA08 /SEL/XX
DIA08 /CUSTOM
-
DUAL CHANNEL PRECISION SIGNAL ISOLATOR MODULE
CUSTOM DUAL CHANNEL PRECISION SIGNAL ISOLATOR MODULE
155.00
CALL
DIM-3 LCD +5V STD
DIM-3 LCD W/PS STD
DIM-3 LED +5V STD
DIM-3 LED W/PS STD
DIM-3 LP
DIM-3 RSP LCD
DIM-3 RSP LED
-
DIGITAL LCD METER +5VDC PWR STANDARD RANGES
DIGITAL LCD METER 8-24VAC/DC PWR STANDARD RANGES
DIGITAL LED METER +5VDC PWR STANDARD RANGES
DIGITAL LED METER 8-24VAC/DC PWR STANDARD RANGES
DIGITAL LCD METER LOOP POWERED STANDARD RANGES
DIGITAL LCD METER WITH REMOTE SET-POINT POT & PLATE
DIGITAL LCD METER WITH REMOTE SET-POINT POT & PLATE
125.00
140.00
155.00
170.00
125.00
175.00
205.00
DISM-D /PC1
DISM-D /PC2
DISM-D /PC/SEQ.
DISM-E /CH1
DISM-E /CH2
DISM-E /SEQ-XX
-
SINGLE PHASE CUT TO 4 - 20mA, 0 - 10V DC ISO. MODULE W/TRANSFORMER
DUAL CH. PHASE CUT TO 4 - 20mA, 0 - 10VDC ISO. MODULE W/TRANSFORMER
SINGLE PHASE CUT TO SEQUENCING OUTPUTS ISO. MODULE
SINGLE CH. SEL. 4 - 20mA, 0 - 10V DC I/O, ISO. MODULE W/TRANSFORMER
DUAL CH. SEL. 4 - 20mA, 0 - 10V DC I/O, ISO. MODULE W/TRANSFORMER
SINGLE CH. SEL. 4 - 20mA, 0 - 10V DC SEQUENCING OUTPUTS ISO. MODULE
120.00
170.00
175.00
100.00
140.00
150.00
DPRM/2
-
DUAL PILOT 15 AMP RELAY MODULE 24V AC/DC COIL
p
u
l
n
ITEM HAS BEEN DISCONTINUED - REPLACED BY DISM-D
ITEM HAS BEEN DISCONTINUED - REPLACED BY DISM-E
ITEM HAS BEEN DISCONTINUED - REPLACED BY SIA05A /OHM /XX
ITEM HAS BEEN DISCONTINUED - REPLACED BY ASM1/135V/XX
(ANY VERSION)
136.00
115.00
120.00
180.00
35.00
32.00
65.00
50.00
130.00
110.00
120.00
20.00
30.00
124.00
32.00
Prices are subject to change without notice.
-25-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
PRICE LIST
LIST PRICE
DRFB /STD
DRFB /SR
DRFB /DR
DRFB /FR
-
DUAL RS-485 TO FIBER OPTIC COMMUNICATION REPEATER
SINGLE RS-485 TO DUAL FIBER OPTIC COMMUNICATION REPEATER
DUAL RS-485 TO DUAL FIBER OPTIC COMMUNICATION REPEATER
FIBER OPTIC COMMUNICATION REPEATER THREE I/O’s
320.00
300.00
400.00
325.00
DSAM /PC
DSAM /VDC
-
DUAL CH. PHASE CUT TO 0 - 10V DC MODULE
DUAL CH. 4 - 20mA, 0 - 10V DC TO 0 - 10V DC MODULE
75.00
75.00
FR485/S
FR485/D
-
RS-485 TO FIBER OPTIC REPEATER, SINGLE FIBER OUTPUT
RS-485 TO FIBER OPTIC REPEATER, DUAL FIBER OUTPUT
CALL
CALL
FVR4 /SEL/X
-
FIXED 4 CH. VOLTAGE SENSITIVE RELAY-ANALOG SIGNAL
90.00
HOA-100 /XX
HOA-102S /XX
-
4 CH. 0 - 10V OR 0 - 15V DC HAND - OFF - AUTO BOARD
2 CH. 0 - 10V OR 0 -15V DC HAND - OFF - AUTO BOARD WITH FB. STATUS
125.00
65.00
IPS-2 /XXX
IPS-2C /XXX
IPS-4 /XXX
IPS-4C /XXX
IPS-4SB
-
ISOLATED DUAL DC POWER SUPPLY
ISOLATED DUAL AC AND DC POWER SUPPLY
ISOLATED QUAD DC POWER SUPPLY
ISOLATED QUAD AC AND DC POWER SUPPLY
ISOLATED DUAL AC & DC POWER SUPPLY 400MA
PRI. 24 OR 120V AC
PRI. 24 OR 120V AC
PRI. 24 OR 120V AC
PRI. 24 OR 120V AC
PRI. 24 OR 120V AC
55.00
45.00
110.00
90.00
65.00
IPXFMR-2 /2/XXX
IPXFMR-2 /4/XXX
IPXFMR-2 /6/XXX
-
ISO. TRANSFORMER 2 OUTPUT 24V AC @ 250mA,
PRI. 24 OR 120V AC
PRI. 24 OR 120V AC
PRI. 24 OR 120V AC
25.00
47.50
70.00
LCRM /XX
-
LOW CURRENT RELAY MODULE 0-10V DC INPUT (EITHER VERSION)
LNFR/S
LNFR/D
-
LONWORKS NETWORK FIBER OPTIC REPEATER, SINGLE FIBER OUTPUTS
LONWORKS NETWORK FIBER OPTIC REPEATER, DUAL FIBER OUTPUTS
260.00
350.00
MASC
-
4 CHANNEL CUSTOM ANALOG SIGNAL SCALER (ANY VERSION)
125.00
MCRM-1
MCRM-10
-
MULTI 10 CH. SPDT 1 AMP RELAY MODULE
MULTI 10 CH. SPDT 10 AMP RELAY MODULE
122.00
100.00
MRB1
-
DIGITAL INTERFACE FOR STAEFA’S DCRM RELAY BOARD
45.00
NSFB
-
DUAL CH. NOISE SUPPRESSION FILTER BOARD
36.00
PACM / / /01
PACM / / /01S
PACM / /XXX /02
PACM / /XXX/02S
PACM /XXX/XXX/031
PACM /XXX/XXX/032
PACM /XXX/XXX/04
PACM /XXX/XXX/05
PACM /XXX/XXX/06
PACM / / /07
PACM /XXX/XXX/08
-
PROGRAMMED ANALOG CONTROLLER MODULE (EMBEDDED CONTROLLER)
85.00
PROGRAMMED ANALOG CONTROLLER MODULE WITH SM2-SVP SENSOR
185.00
PROGRAMMED ANALOG CONTROLLER MODULE LINEARIZE SM2-SVP SENSOR
85.00
PROGRAMMED ANALOG CONTROLLER MODULE WITH SM2-SVP SENSOR
185.00
PROGRAMMED ANALOG CONTROLLER MODULE (SQUARE ROOT EXT. SINGLE)
85.00
PROGRAMMED ANALOG CONTROLLER MODULE (SQUARE ROOT EXT. DUAL)
85.00
PROGRAMMED ANALOG CONTROLLER MODULE (3 INPUT AVE. OF2)
85.00
PROGRAMMED ANALOG CONTROLLER MODULE (INDOOR AIR QUALITY)
CALL
PROGRAMMED ANALOG CONTROLLER MODULE (MIXED AIR CONTROL)
CALL
PROGRAMMED ANALOG CONTROLLER MODULE (FKV-32 TO SVP OUTPUT)
85.00
PROGRAMMED ANALOG CONTROLLER MODULE (2K NTC THERMISTOR)
100.00
PCDO /XX/PCM-XX
PCDO /XX/PCM-SEQ
PCDO //PCM-AMP
-
DUAL CHANNEL PHASE CUT OR mA TO PHASE CUT DRIVER 40 WATT (1:1 SEQ) 145.00
DUAL CHANNEL PHASE CUT OR mA TO PHASE CUT DRIVER 40 WATT (2:1 SEQ) 145.00
DUAL CHANNEL PHASE CUT TO PHASE CUT AMP 40 WATT
95.00
PDM1
-
PULSE DIVISION MODULE (42 TO 4256) V DC & OPEN COLLECTOR OUTPUT
PLFT24
-
POWER LINE TO FREE TOPOLOGY LONWORKS ROUTER 24V
PMR4/2
PMR4
-
PWM TO MULTISTAGE RELAY MODULE (2 RELAYS) for DELTA BACstat II
PWM TO MULTISTAGE RELAY MODULE (4 RELAYS) for DELTA BACstat II
60.00
70.00
PRM24
-
PILOT 10 AMP RELAY MODULE 24V AC/DC COIL
16.80
PSIM-MASTER
PSIM-SLAVE
PSIM-HOC
PSIM-STBD
PSIM-CABLES
-
PHOENIX-STAEFA INTERFACE MODULE MASTER W/ PC TO 0 -10V DC
PHOENIX-STAEFA INTERFACE MODULE SLAVE W/O PC TO 0 -10V DC
PSIM HEATING OVERRIDE CONTROL BOARD
PSIM SCREW TERMINAL BOARD
PSIM CABLES FOR MASTER OR SLAVE INTERFACE BOARD
25.00
50.00
800.00
200.00
180.00
50.00
25.00
CALL
-26-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
PRICE LIST
LIST PRICE
RCM4/FTT
RCM4/PLT
-
RELAY CONTROL MODULE, FREE TOPOLOGY TRANSCEIVER
RELAY CONTROL MODULE, POWER LINE TRANSCEIVER
RH-LCD /XX/XXX
-
DIGITAL DISPLAY (STAEFA HOUSING) VDC/mA SIGNALS
82.00
ROSM/X
-
DOOR ACTUATED ROOM OFFSET SWITCHING MODULE
60.00
RS-DCP /XXX
RS-LCD
RSC-RS-1000D
-
RM SENSOR WITH DUAL SENSOR & COM PORTS (T-30, T-1, AD590)
RM SENSOR SEE RSC-RS BELOW OR SM2-RS, SMVU-RS, ON NEXT PAGE
RM SENSOR WITH DIGITAL DISPLAY (for Staefa RS Controller T-1 sensor)
118.00
S1PI /STD
S1PI /VDC-MA/XX
-
SMART 1 PROPORTIONAL PHASE CUT DRIVER 16W
0 - 10V DC OR 4 - 20mA TO PHASE CUT DRIVER 16, 27, 40, 80 WATTS
109.00
100.00
SBM
-
SIGNAL BUFFER MODULE (1 TO 4 CH)
35.00
SIA02K /XXX/XXX
-
VOLTAGE OR CURRENT TO KLIMO SENSOR VOLTAGE OUTPUT
84.00
SIA03A /PC/MA
SIA03A /2XX/MA
SIA03A /CUSTOM
-
10-90% PHASE CUT, TO 4 - 20mA OUTPUT MODULE
TWO INPUT, H.L.S.A. FUNCTION, TO 4 - 20mA OUTPUT MODULE
CUSTOM SIA03A MODULE
120.00
120.00
CALL
SIA05A /STD-15
SIA05A /STD-30
SIA05A /OHM
SIA05A /CUSTOM
-
3 TO 15 PSI INPUT TO VOLTAGE AND 4 - 20mA OUTPUT
3 TO 30 PSI INPUT TO VOLTAGE AND 4 - 20mA OUTPUT
2 OR 3 WIRE RESISTANCE TO 4 - 20mA & VDC OUTPUT
CUSTOM INPUT TO CUSTOM OR STANDARD OUTPUT
100.00
100.00
70.00
CALL
SIA07A ///X/XXX/VDC/X
SIA07A ///X/XXX/MA /X
SIA07A /CUSTOM
-
2 TO 6 INPUTS, VOLTAGE OUTPUT, ANY FUNCTION CODE
2 TO 6 INPUTS, 4 - 20mA OUTPUT, ANY FUNCTION CODE
2 TO 6 CUSTOM INPUTS, VOLTAGE OR mA OUTPUT, ANY FUNCTION CODE
99.00
114.00
CALL
SIA08 /SEL/5V
SIA08 /SEL/10V
SIA08 /CUSTOM
-
SELECTABLE INPUT TRANSFORMER ISO. 0 - 5V, 4 - 20mA OUTPUT
SELECTABLE INPUT TRANSFORMER ISO. 0 - 10V, 4 - 20mA OUTPUT
CUSTOM INPUT OR OUTPUT RANGES TRANSFORMER ISOLATED
110.00
110.00
CALL
SM2-RS-1000D
SM2-RS-1010D
SM2-RS-1101D
SM2-RS-1111D
-
T-30 RM SENSOR WITH DIGITAL DISPLAY
T-30 RM SENSOR WITH OVERRIDE & DIGITAL DISPLAY
T-30 RM SENSOR WITH SETPOINT & DIGITAL DISPLAY
T-30 RM SENSOR WITH OVERRIDE, SETPOINT & DIGITAL DISPLAY
82.00
84.50
92.50
95.00
SM2-RS-2101D
-
T-30 RM SENSOR DDC VERSION WITH SETPOINT & DIGITAL DISPLAY
95.00
SMVU-RS-1000D
SMVU-RS-1010D
SMVU-RS-1101D
SMVU-RS-1111D
-
T-1
T-1
T-1
T-1
SMVD
SMVD
SMVD
SMVD
SMVD
SMVD
SMVD
SMVD
SMVD
SMVD
-
PHASE CUT AMPLIFIER MODULE 40, 80 WATTS
PHASE CUT AMPLIFIER MODULE 120 WATTS
PHASE CUT, MA, VOLTAGE INPUT TO 6 TO 18V PC OUTPUT 40, 80 WATTS
PHASE CUT, MA, VOLTAGE INPUT TO 6 TO 18V PC OUTPUT 120 WATTS
UNI INPUT W/SEQUENCING OPT. TO 6 TO 18V PC OUTPUT 40,80 WATTS
UNI INPUT W/SEQUENCING OPT. TO 6 TO 18V PC OUTPUT 120 WATTS
ISO. 4 TO 20mA INPUT TO 6 TO 18V PC OUTPUT 40, 80 WATTS
ISO. 4 TO 20mA INPUT TO 6 TO 18V PC OUTPUT 120 WATTS
ISO. 4 TO 20mA INPUT W/SEQUENCING TO 6 TO 18V PC OUTPUT 40, 80W
ISO. 4 TO 20mA INPUT W/SEQUENCING TO 6 TO 18V PC OUTPUT 120W
SORM
SSRM
-
SIGNAL OVERRIDE MODULE
START STOP RELAY MODULE
UIPCM /AC
UIPCM /DC
UIPCM /CUSTOM
-
UNI INPUT TO PWM OR 3 PT FLOATING 24 VAC OUTPUT
UNI INPUT TO PWM OR 3 PT FLOATING OPEN COLLECTOR DC OUTPUT
UNI INPUT TO PWM OR 3 PT FLOATING CUSTOM
105.00
100.00
CALL
UIPT /M/STD
UIPT /B/STD
UIPT /X/FBX
-
UNI INPUT PNEUMATIC TRANSDUCER (MAINTAINED)
UNI INPUT PNEUMATIC TRANSDUCER (BLEED)
UNI INPUT PNEUMATIC TRANSDUCER WITH FEEDBACK
135.00
140.00
150.00
/AMP/XX W
/AMP/120W
/UNI/XX W
/UNI/120W
/SEQ/XX W
/SEQ/120W
/MAI/XX W
/MAI/120W
/MIS/XX W
/MIS/120W
RM SENSOR WITH DIGITAL DISPLAY
RM SENSOR WITH OVERRIDE & DIGITAL DISPLAY
RM SENSOR WITH SETPOINT & DIGITAL DISPLAY
RM SENSOR WITH OVERRIDE, SETPOINT & DIGITAL DISPLAY
250.00
325.00
93.00
93.00
95.50
103.50
105.00
64.00
78.00
96.00
110.00
96.00
110.00
100.00
114.00
100.00
114.00
35.00
43.00
-27-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
PRICE LIST
LIST PRICE
UIRO /STD
UIRO /STD-ADJ.
UIRO /CUSTOM
UIRO /CUSTOM-ADJ
UIRO_RM /STD
UIRO_RM /CUSTOM
-
UNI INPUT TO 3 WIRE POTENTIOMETER STD OUTPUT
UNI INPUT TO 3 WIRE POTENTIOMETER STD OUTPUT ADJUSTABLE BASE
UNI INPUT TO 3 WIRE POTENTIOMETER CUSTOM OUTPUT
UNI INPUT TO 3 WIRE POTENTIOMETER CUSTOM OUTPUT ADJUSTABLE
UIRO RESISTANCE MODULE STANDARD RESISTANCE OUTPUT
UIRO RESISTANCE MODULE CUSTOM RESISTANCE OUTPUT
UMATR /AD590
UMATR /RTD
UMATR /VDC
UMATR /XXXX
-
4 - 20mA TRANSMITTER W/ AD590 SENSOR
4 - 20mA TRANSMITTER SET-UP FOR 100V RTD SENSOR
4 - 20mA TRANSMITTER VOLTAGE INPUT
DUCT OR WELL HOUSING FOR UMATR & SENSOR
65.00
65.00
65.00
15.00
UPAC
UPAC
UPAC
UPAC
-
FLT OR PWM TO 4 - 20mA AND 0-10V DC CONVERTER
FLT OR PWM TO ADJUSTABLE VOLTAGE 0 - 5V TO 0 - 15V DC
PULSE COUNTER TO 4-20mA AND 0-10V DC OR 0-5V DC
CUSTOM PULSE INPUT TO ANALOG CONVERTER
85.00
85.00
90.00
CALL
VMAC/S
VMAC/P
-
VOLTAGE TO MA CONVERTER (SNAP TRACK MOUNTING)
VOLTAGE TO MA CONVERTER (POTTED - DOUBLE STICK TAPE MOUNTING)
38.00
45.00
VPM1
-
VOLTAGE TO PWM MODULE FOR “GE” MODULATING MOTOR
58.00
VRDC
VRDC/48V
-
ADJ. DC VOLT. RELAY w/ TIME DELAY (NON-ENCAPSULATED, PS 24V AC)
VRDC WITH 60.4KV RESISTOR FOR 0-60V DC OPERATION
55.00
55.00
VRWM
VRWM
VRWM
VRWM
-
VANDAL RESISTANT SENSOR W/ STAEFA'S F-T30
VANDAL RESISTANT SENSOR W/ TWO (2) STAEFA'S F-T30
VANDAL RESISTANT SENSOR W/ STAEFA'S T-1
VANDAL RESISTANT SENSOR W/ AD590
-
WIRE ADDER MODULE 2/4
FUSE /225.250
FUSE /225.500
FUSE /225.750
FUSE /225 001
FUSE /225 01.5
FUSE /225 002
FUSE /225 003
FUSE /225 006
-
LITTELFUSE .25 AMP. 2AG SERIES
LITTELFUSE 1 AMP. 2AG SERIES
LITTELFUSE 1.5 AMP. 2AG SERIES
SNAP /8TK2-24
SNAP /8TK2-48
SNAP /TK2-24
SNAP /TK2-48
-
RDI SNAP TRACK 2.19" WIDE X 24" LONG
5.50
9.50
5.50
9.50
SHUNTS - .1"
-
AMP # 881545 JUMPER W/ HANDLE
2.50
GAUGE SET
-
0 TO 30PSI GAUGE SET
VIP-F-B/4-20I/3-15PSI
-
4 TO 20MA INPUT TO 3 TO 15 PSI OUTPUT TRANSDUCER
/STD
/ADJ
/CNT
/CUSTOM
/F-T30
/(2)F-T30
/T-1
/AD590
WAM2/4
160.00
170.00
CALL
CALL
30.00
40.00
66.00
110.00
66.00
36.00
58.00
AUXILIARY PRODUCTS
(PACKAGE OF 5)
(PACKAGE OF 5)
(PACKAGE OF 5)
(PACKAGE OF 5)
(PACKAGE OF 5)
(PACKAGE OF 5)
(PACKAGE OF 5)
(PACKAGE OF 5)
(PACKAGE OF 5)
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
15.00
-28-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
TERMS AND CONDITIONS
PRODUCT CATALOG
Atkinson Electronics, Inc. sells its products under the following terms and conditions. Any additional or different terms must be
specifically agreed to, in writing, prior to any sale. Terms are subject to change and current terms in effect at the time of sale will
apply.
ORDERING
To place an order, contact Atkinson Electronics, Inc. and ask for a Customer Service Engineer in the Circuit Board Division. The
minimum order amount is One Hundred Dollars ($100.00) list price.
All telephone orders should be confirmed in writing prior to shipment with a mailed or faxed written confirming order including your
contact at Atkinson Electronics. Mark your confirming document "CONFIRMING ORDER, DO NOT DUPLICATE". This procedure
is necessary to make sure that our products meet your requirements.
WRITTEN OR FAXED ORDERS
Send your order to the attention of "Circuit Board Division Order Entry." Please include the following on your order:
v
v
v
v
v
v
Purchase Order Number
Bill and Ship To Addresses
Quantity, Part Number, Description of Parts Ordered and Calibration Specifications (if any)
Specify method of Shipment, FEDEX EC. (2 day), FEDEX STD. (Next afternoon), FEDEX PR. (Next morning), UPS, etc.
Requested Ship Date and/or Required Delivery Date
Buyers Name, Telephone and Fax Number
Upon receipt we will fax to you a confirmation of your order, pricing and estimated ship date and an assigned Sales Order Number.
Please refer to this number in all further communications regarding this order.
INTERNATIONAL ORDERS
International shipments are subject to additional handling, export documentation and shipping charges, as well as any appropriate
duties, taxes or fees. If you deal with a Customs Broker, please provide us with the broker's name, address, telephone number,
and a copy of their import documents so we may process your order quickly. Terms for payment are prepaid in US dollars by
Electronic Funds Transfer to our bank or a bank check in US dollars.
SCHEDULED ORDERS
We encourage blanket purchase orders with scheduled releases. We request each release be shipped to a single destination and
releases be confirmed 90 days in advance of scheduled delivery. If delivery is not taken on the quantities ordered, the Customer
will be invoiced for the difference in price between the quantities ordered and the quantities accepted, if any, based on the discount
schedule in effect on the date that the original order was placed.
DELIVERY
Promises of delivery from stock are subject to prior sale. Delivery dates are not guaranteed, but are estimated on the basis of our
immediate receipt of all needed information supplied by the Customer. We will, in good faith, attempt to meet estimated delivery
dates, but we do not accept responsibility for delays resulting from circumstances beyond our reasonable control. Atkinson
Electronics, Inc. is relieved of all risks of loss or damage of goods upon our delivery of goods to the carrier.
EXPEDITING
Normal delivery runs 5 days to 10 days. If an order requires expediting, please discuss your needs with Customer Service, as we
will do our best to meet your requirements at minimal additional costs. There is a minimum expedite charge of $25.00 or 10%
of total order, whichever is greater, (plus shipping cost) for orders expedited from factory stock. Expedite charges may vary based
upon your requirements. In order to keep expedite charges at a minimum, give us as much information and advance warning as
possible. We may have to adjust another customer's order, reschedule production or use other outside services to meet your
expediting needs.
SHIPMENTS
We ship by FEDEX Economy (2 day) whenever possible unless another qualified carrier is requested. FEDEX Standard (Next
afternoon), FEDEX Priority (Next morning), or other arrangements are optional. All shipments are F.O.B. Salt Lake City, Utah and
shipping and handling charges are at prevailing rates. Orders received after 1:00 P.M. (Salt Lake City) will be processed on the
next business day.
-29-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
PRODUCT CATALOG
BACK ORDERS
In the event that an order cannot be completely filled, the balance of the order will be back ordered and will be shipped as soon
as possible. If you want the entire order shipped at one time, specify "SHIP COMPLETE".
CLAIMS
Any discrepancies in shipments must be brought to the attention of our Customer Service Representatives within ten (10)
working days of receipt of shipment. Deductions from remittances will not be allowed unless authorized by Atkinson
Electronics, Inc. in writing.
PAYMENT TERMS
Payment terms are C.O.D. or prepaid unless an open account is established.
OPEN ACCOUNTS
We offer terms of Net 30 days to all Customers who have established an open account with Atkinson Electronics, Inc. To establish
an open account, please contact the credit department and complete an application and forward it to Atkinson Electronics, Inc.,
ATTN: CREDIT MANAGER. It generally takes two to three days to process your account once the credit application is received.
v
v
v
v
The invoice number MUST appear on your check stub to insure proper credit to your account!
An additional 1.5% per month service charge will be added to any account balance aging over 30 days.
Accounts with past due balances beyond 60 days will be placed on credit hold.
It is our policy not to ship to any account that is past due.
In the event that it becomes necessary for Atkinson Electronics, Inc. to take legal action to enforce the provisions of this agreement
or to obtain redress for the breach of any provision hereof, the buyer shall pay the costs of such action, including reasonable
attorney fees. All legal proceedings that are in anyway related to this agreement shall be conducted in a court of competent
jurisdiction in Salt Lake County, Utah.
PRICES
The price of goods sold are those in effect at the time of sale. All prices are subject to change without notice and exclude any
taxes, shipping and handling charges. Please contact Customer Service for current pricing. We will be pleased to furnish written
quotations either by mail or facsimile upon request. Quoted prices and conditions are valid for 30 days from the date of the written
confirmation of the quote, unless otherwise specified.
QUANTITY DISCOUNTS
Resale discounts will be extended to account-holding customers who are involved in the manufacture or resale of electronic
control products. Quantity discounts apply to each specific item or product part number. Product part numbers with separate input
or output specifications count as separate items for quantity pricing unless specifically noted in a price quote. The discount
structure is as follows:
v
v
v
v
v
Quantity of 1 to 4 pieces 25% off the list price
Quantity of 5 to 9 pieces 27.5% off the list price
Quantity of 25 to 49 pieces 32.5% off the list price
For Quantities of 50 or more call for a price quote
Retail discounts will be extended to Industrial, Commercial, and Institutional account-holding customers who are involved in
installation or maintenance of their own electronic control systems. Quantity discounts apply to each specific item or product part
number. Product part numbers with separate input or output specifications count as separate items for quantity pricing unless
specifically noted in a price quote. The discount structure is as follows:
v
v
v
v
v
Quantity of 1 to 4 pieces list
For Quantities of 50 or more call for a price quote
-30-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
PRODUCT CATALOG
TAXES
All applicable and required taxes, duties and governmental fees are additional charges which will be added to the selling price.
Utah customers must furnish an appropriate resale exemption certificate or sales tax will be added to the invoice prior to shipment.
RETURNS
YOU MUST call customer service for an RMA # before returning any product to the factory. Shipments to the factory not
covered by a valid RMA number are subject to refusal of delivery. The RMA number should be marked on the outside of the
return package as "ATTN: Customer Service, RMA #
". To avoid delays, please include the following information inside the
package:
v
v
v
v
v
v
Returned Merchandise Authorization (RMA) Number
Customer Order Number and Invoice Number
Returnee's name, address and telephone number
Product model number and date purchased
Reason for return
Additional/repair instructions
Preship Warranty Replacements (PWR) are made only if we are supplied with the sales order number or invoice number of the
original device. Atkinson Electronics, Inc. will pay FEDEX Economy charges on the Preship Warranty Replacement. If the
defective units are not covered by our warranty, or if the defect is due to miss-use or improper installation, the customer will be
billed for both the Preship Warranty Replacement at 75% of list price and the freight.
All returns must be shipped prepaid to the factory.
Customers will be billed for any Preship Warranty Replacements if the defective units are not returned to the factory within 30 days.
RETURNS FOR CREDIT
Only new and unused products may be returned for credit. Atkinson Electronics, Inc. inspects, retests and repackages ALL
products returned for credit. All returns for credit are subject to a retest and restock charge (25% of purchase price but no less
than $25.00). Products that are customized for specialty applications are not usually resalable items and for this reason credit
will not normally be given if these products are returned. Debit memos will not be accepted without written authorization and an
RMA number. After the return for credit is processed, the proper credit will be issued. No cash refunds will be issued unless
requested in writing.
RETURNS OF NON-WARRANTED PRODUCTS
An appropriate charge (25% of Atkinson's published product price list) will be made for testing, repairs, replacement and shipping
for returned products which are not defective or found to be defective as the result of improper use, maintenance or neglect.
DESIGN AND SPECIFICATIONS
Atkinson Electronics, Inc. reserves the right to make changes in the design and/or specifications of any product as technological
advances or necessity requires.
CUSTOM PRODUCT
In many cases, our products can be calibrated to your custom requirements or slight modifications can be made to meet your
specifications. Usually the additional charges and lead times are nominal, if any. If a custom product is to be returned, please
note that products that are customized for specialty applications are usually not resalable items. For this reason, credit will not
normally be given. Contact your Customer Service Representatives for quotes on your special requirements.
-31-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
PRODUCT CATALOG
LIMITED WARRANTY
Atkinson Electronics, Inc. gives this express warranty (along with extended warranty endorsements, where
applicable) in lieu of all other warranties, express or implied, including (without limitation), warranties of
merchantability and fitness for a particular purpose. This constitutes Atkinson Electronics, Inc.'s sole
warranty and obligation with regard to our products as well as the Customer's sole remedy.
Atkinson Electronics, Inc. expressly disclaims all liability and responsibility for any special, indirect or
consequential damages or any further loss of any kind whatsoever resulting from the use of our product.
The Customer's sole and exclusive remedy and the limit of Atkinson Electronics, Inc.'s liability for any loss
whatsoever, shall not exceed the purchase price paid by the Customer for the product to which a claim is
made.
Countries or States that do not allow limitations of incidental or consequential damages or on how long an
implied warranty lasts, the above limitations may not apply to you. This warranty gives you specific legal
rights and you may also have other rights which vary from State to State or Country to Country.
All products manufactured by Atkinson Electronics, Inc. are warranted to be free from defects in material and
workmanship in accordance with and subject to the following terms and conditions:
1. This warranty is limited to the original customer only. It cannot be transferred or assigned to third parties
unless the intent to transfer to a third party is expressly indicated in a purchase order and/or warranty
processing arrangements have been agreed upon in writing by Atkinson Electronics, Inc.
2. Atkinson Electronics, Inc. will correct any defects in material or workmanship which appear within one
(1) year from the date of shipment by Atkinson Electronics, Inc. (or its authorized distributors) to the
original Customer. Atkinson Electronics, Inc. will repair or replace, at our option, any defective products,
provided that our inspection discloses that such defects developed under normal and proper use. This
warranty does not extend to goods subjected to misuse, neglect, accident or improper installation, or to
maintenance or repair of products which have been altered or repaired by anyone except Atkinson
Electronics, Inc., unless otherwise stated in writing.
3. An appropriate charge (25% of product list price) will be made for testing, repairs, replacement and
shipping for a returned product which is not defective or found to be defective as the result of improper
use, maintenance or neglect.
4. Atkinson Electronics, Inc. will not accept responsibility for any invoiced goods or services that are not
covered by an Atkinson Electronics, Inc. written purchase order. Under no circumstances does Atkinson
Electronics, Inc. agree to pay for labor or other related expenses associated with the troubleshooting
and/or repair of our product without prior specific written authorization.
5. Information in our descriptive literature is based on product specifications that are current at the time
of publication. Product specifications, design and descriptive literature are subject to change as
improvements are introduced. Although we announce changes as they occur, we cannot guarantee
notification to every Customer. Atkinson Electronics, Inc. warrants delivered products to conform to the
most current specifications, design and descriptive literature.
This warranty policy may be expanded or limited, for particular categories of products or Customers, by
information sheets published as deemed appropriate by Atkinson Electronics, Inc.
-32-
Phone (801) 262-6400, 1-800-261-3602
Fax (801) 261-3796
The leader in custom
HVAC interfacing
products for twenty
years
Providing unique
solutions for the
HVAC control
interface problems of
today & tomorrow
Atkinson Electronics, Inc. (AEI) was founded in 1976 by Gaylen V.
Atkinson as one of the first custom interface manufacturers.
In 1976 AEI focused on custom interface boards for solar
instrumentation and control. In 1980 AEI expanded its focus to
include HVAC controls and became a control systems distributor.
Increased emphasis was given to manufacturing and sales of
electronic interface boards in 1984. The same year, our first product
catalog was developed and mailed to control contractors around the
country. The construction of our Murray, Utah facility which
quadrupled manufacturing, engineering and office space was
completed in 1991.
As both a HVAC control systems distributor and electronic interface
manufacturer, AEI has provided unique solutions for the electronic
interface problems in the HVAC industry.
AEI remains the leader in design, engineering, and manufacturing of
control interface devices.
Throughout our existence, our
commitment has remained the same...
...to provide our customers with
innovative solutions to their control
system problems.

PRODUCT OVERVIEW AND CD

Transcription

Similar documents

ERL-0631-GD PR

ApogeeConnnects : Rosetta 800 - MiniDAC

Model 61302 Barometric Pressure Sensor

350239B SD505-6RB

INSTRUCTIONS FOR THE PREPARATION OF A FINAL TYPESCRIPT

Training Objectives Overview 3

Ontario - SCADALink

smart pac iii

iSCOUT PRS80

PixelView Software User Manual