Freud 2007-2008 Catalog

Transcription

245-322 Pages 8-28-06
8/31/06
2:33 PM
Page 278
Straight Edge Cutters
Fixed Wing Cutters
These cutters are computer balanced for super smooth, chatter-free cutting.
Straight profile for making precise rabbets and dadoes.
D
Item
Number
EC140
EC141
EC142
EC143
EC144
EC146
UP140
UP141
UP142
UP143
UP144
UP145
UP146
UP147
UP148
UP149
UP150
UP151
UP152
UP153
Overall
Dia.(D)
27/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
Carbide
Height
1/4"
3/8"
1/2"
5/8"
3/4"
1"
1/4"
3/8"
1/2"
5/8"
3/4"
7/8"
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/4"
2-1/2"
3"
Bore
Diameter
3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
Rub Collar
Number
RC-003
RC-003
RC-003
RC-003
RC-003
RC-003
RC50#
RC50#
RC50#
RC50#
RC50#
RC50#
RC50#
RC50#
RC50#
RC50#
RC50#
RC50#
RC50#
RC50#
See Bushing & Rub Collars for Bore Size
“#” Determines Bore Size
Number of Wings = 3
1/4"
3/8"
1/2"
# EC140
# UP140
# EC141
# UP141
278
5/8"
# EC142
# UP142
3/4"
7/8"
1-1/4"
SHAPER CUTTERS
1"
# EC143
# UP143
# EC144
# UP144
# UP145
# EC146
# UP146
# UP147
1-1/2"
3"
1-3/4"
2"
2-1/4"
2-1/2"
# UP148
# UP149
# UP150
# UP151
All Profile Drawings 1:1 Scale
# UP152
# UP153
Red Item Numbers Indicate 1-1/4" Bore
245-322 Pages 8-28-06
8/31/06
2:33 PM
Page 279
Groovers
Excellent for use on shapers and cope spindles of double end tenoners.
Suitable for grooving hardwood, softwood, and composition board.
Overall
Dia.(D)
4"
4"
4"
4"
4"
6"
6"
6"
6"
6"
8"
8"
8"
8"
Number
of Wings
6
6
6
6
6
8
8
8
8
8
12
12
12
12
Carbide
Height(H)
1/8"
1/4"
3/8"
1/2"
3/4"
1/8"
1/4"
3/8"
1/2"
3/4"
1/4"
3/8"
1/2"
3/4"
Bore
Diameter
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
Fixed Wing Cutters
Item
Number
UP170
UP171
UP172
UP173
UP174
UP175
UP176
UP177
UP178
UP179
UP181
UP182
UP183
UP184
D
3/8"
1/4"
1/8"
H
1/2"
3/4"
# UP170
# UP175
# UP172
# UP177
# UP182
# UP171
# UP176
# UP181
# UP173
# UP178
# UP183
# UP174
# UP179
# UP184
279
Freud's Reversible Glue Joint Cutters will produce a strong joint by increasing
the surface area for the glue. Boards should be planed to a uniform thickness.
Cutter should be aligned to the center of the board, then reverse each board for
a perfect glue joint.
Item
Number
EC031
UP031
Overall
Diameter
2-7/8"
3-9/16"
Cut
Depth(C)
5/32"
5/32"
Carbide
Height(H)
1-17/64"
1-3/16"
Minor
Height(m)
23/64"
23/64"
D
C
H m
A
Cutters
# EC031
# UP031
# EC031
# UP031
Angle
(A)
30°
30°
Bore
Diameter
3/4"
1-1/4"
SHAPER CUTTERS
Reversible Glue Joint Cutters
245-322 Pages 8-28-06
8/31/06
2:33 PM
Page 280
Wedge Tongue & Groove Cutters
These cutters produce exceptionally strong joints when gluing up boards edge to
edge. This design gives an increased amount of gluing area for maximum strength.
Fixed Wing Cutters
Item
Number
EC032
EC033
UP032
UP033
Overall
Dia.(D)
2-7/8"
2-7/8"
3-9/16"
3-9/16"
Cut
Depth(C)
5/16"
5/16"
5/16"
5/16"
Carbide
Height(H)
1-7/64"
1-7/64"
1-3/32"
1-3/32"
Minor
Height(m)
3/8"
3/8"
3/8"
3/8"
Angle
(A)
20°
20°
20°
20°
Bore
Diameter
3/4"
3/4"
1-1/4"
1-1/4"
D
D
C
C
H m
Cutters
# EC032
# UP032
A
H m
Cutters
# EC033
# UP033
A
# EC033
# UP033
# EC032
# UP032
Glue Joint Cutters
Freud's Glue Joint Cutters produce a strong joint in thick stock by increasing the
surface area for the glue. Boards should be planed to a uniform thickness. Cutter
should be aligned to the center of the board, then reverse each board for a perfect
glue joint.
280
D
C
Item
Number
UP035
UP036
UP037
Overall
Dia.(D)
3-9/16"
3-9/16"
3-9/16"
Cut
Depth(C)
13/64"
13/64"
13/64"
Carbide
Height(H)
23/8"
1-23/32"
1-23/32"
Angle
(A)
32°
32°
32°
Minor
Height(m)
49/64"
49/64"
13/32"
Bore
Diameter
1-1/4"
1-1/4"
1-1/4"
Number of wings = 3
SHAPER CUTTERS
D
D
C
H
C
Cutter
# UP035
m
A
Cutter
# UP036
H m
A
H m
A
Cutter
# UP037
# UP035
# UP036
# UP037
245-322 Pages 8-28-06
8/31/06
2:34 PM
Page 281
Tongue & Groove Lock Miter Cutters
Item
Number
EC034
UP034
Overall
Dia.(D)
4-5/32"
4-3/4"
Carbide
Height(H)
1-5/32"
1-3/16"
Bore
Diameter
3/4"
1-1/4"
Number of Wings = 3
D
Cutter
# EC034
# UP034
H
Double Tongue & Groove Lock Miter Set
Fixed Wing Cutters
These cutters are designed to make lock miter joints with ease. All you do
is run one board vertically and the piece to be joined vertically.
281
Item
Number
UP160
Overall
Dia.(D)
7-3/32"
Number of pieces = 2
Carbide
Height(H)
1-5/16"
Bore
Diameter
1-1/4"
Number of Wings = 3
D
H
Cutters
# UP160
SHAPER CUTTERS
This Lock Miter Set consists of two three-wing cutters. One sits inside the
other to allow the joining of boards from 5/8" thick to 1-3/16" thick. After
mounting the head on the spindle, a test piece should be made. One piece
is run horizontally and the second is run vertically. Shims are included to
allow for adjusting joint tightness.
245-322 Pages 8-28-06
8/31/06
2:34 PM
Page 282
V-Paneling Cutter Sets
Fixed Wing Cutters
These cutters sets are designed to make V-groove paneling with a strong
tongue and groove joint. Each set can be used with 1/2", 3/4", and 1" stock.
Shims are included to allow the thickness of the tongue to increase as stock
increases. UP190 cuts a V-groove on both sides of the paneling, while UP191
only cuts a V-groove on one side.
Item
Number
NEW
NEW
Overall
Dia.(D)
UC190
3-35/64"
UP190
4-1/8"
UC191
3-35/64"
UP191
4-1/8"
Cut
Depth(C)
Carbide
Height(H)
19/64"
19/64"
9/32"
9/32"
1-5/16"–1-5/64"
31/32"–1-5/64"
1-1/32"–1-5/32"
1-1/16"–1-3/16"
Cutter Set #UC190 & #UP190
Minor
Tenon
Height(m) Thickness(R)
19/64"
19/64"
19/64"
19/64"
Tenon
Length(L)
3/16"-19/64"
3/16"-19/64"
3/16"-5/16"
3/16"-5/16"
Bore
Dia.
19/64"
3/4"
19/64"
1-1/4"
9/32"
3/4"
9/32"
1-1/4"
Number of wings = 3
Cutter Set #UC191 & #UP191
m
m
H
H
L
L
282
T
T
SHAPER CUTTERS
C
C
3/16"
Min.
3/16"
Min.
19/64"
Max.
5/16"
Max.
# UC191
# UP191
# UC190
# UP190
245-322 Pages 8-28-06
8/31/06
2:34 PM
Page 283
Drawer Lock Cutters
Item
Number
EC240
UP240
Overall
Dia.(D)
2-7/8"
3-15/16"
Cut
Depth(C)
1/8"
1/8"
Carbide
Height(H)
33/64"
33/64"
Minor
Height(m)
5/32"
5/32"
Bore
Diameter
3/4"
1-1/4"
Number of Wings = 3
D
m
H
# EC240
# UP240
Fixed Wing Cutters
Designed for 1/2" and 3/4" thick stock, these cutters provide a strong joint for
drawer fronts. Run the drawer face flat on the shaper table, and the drawer sides
vertically on the fence. Once correct setup is attained for drawer front, height of
cutter does not need to be changed to run drawer sides.
C
283
This cutter is used where very strong joining is needed. The cutter has three
balanced wings and will join wood up to 5/8" thick. Wider boards can be joined
by stacking multiple cutters on the spindle. After the first board is cut, the spindle
should be raised or lowered 1/8" to make the mating cut.
NEW
Item
Number
UC250
UP250
Overall
Dia.(D)
2-61/64"
3-9/16"
Cut
Depth(C)
11/32"
11/32"
Carbide
Height(H)
25/32"
25/32"
Minor
Height(m)
15/64"
15/64"
Angle
(A)
10°
10°
Bore
Diameter
3/4"
1-1/4"
Number of Wings = 3
D
C
m
H
# UC250
# UP250
A
SHAPER CUTTERS
Finger Joint Cutter
245-322 Pages 8-28-06
8/31/06
2:34 PM
Page 284
Door Lip Cutters
Fixed Wing Cutters
These cutters are designed for counter-clockwise rotation with the rabbet down,
popular with raised panel doors where the panel extends further than the door frame.
With clockwise rotation they can be used with the face down, so inconsistency in
door thickness will not show when doors are closed.
Item
Number
EC001
UP001
Overall
Cut
Carbide
Dia.(D) Depth(C) Height(H)
2-7/8"
29/64"
1-1/4"
3-9/16"
29/64"
1-1/4"
Minor
Height(m)
43/64"
43/64"
Large
Radius(R)
23/64"
23/64"
Angle
(A)
7°
7°
Bore
Diameter
3/4"
1-1/4"
Number of Wings = 3
D
C
R
H
m
# EC001
# UP001
A
Door Lip Cutter
284
SHAPER CUTTERS
This cutter is designed for clockwise rotation with the rabbet down, popular with
raised panel doors where the panel extends further than the door frame. With counterclockwise rotation it can be used with the face down, so inconsistency in door
thickness will not show when doors are closed.
Item
Number
UP002
Overall
Cut
Carbide
3-9/16"
29/64"
1-1/4"
Minor
Height(m)
43/64"
Large
Radius(R)
23/64"
Angle
(A)
7°
Bore
Diameter
1-1/4"
Number of Wings = 3
A
D
m
H
R
# UP002
C
245-322 Pages 8-28-06
8/31/06
2:35 PM
Page 285
Door Lip Cutters
Item
Number
UP290
UP291
UP292
UP293
UP294
UP295
UP296
UP297
Overall
Dia.(D)
4-21/64"
3-15/16"
4-21/64"
4-21/64"
4-21/64"
4-21/64"
4-21/64"
4-21/64"
Cut
Depth(C)
Carbide
Height(H)
Minor
Height(m)
7/16"
3/8"
23/64"
3/8"
25/64"
13/32"
13/32"
7/16"
1-1/32"
1-1/32"
1-1/32"
1-1/32"
1-1/32"
1-1/32"
1-1/32"
1-1/32"
25/64"
25/64"
25/64"
9/32"
25/64"
25/64"
25/64"
23/64"
Large
Small
Radius(R1) Radius(R2)
25/64"
9/32"
1/8"
15/64"
1/4"
1/8"
1/8"
19/32"
–
1/8"
–
1/8"
1/8"
1/8"
5/64"
1/8"
Bore
Diameter
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
Number of Wings = 3
D
m
H
Fixed Wing Cutters
All of these door lip cutters leave a smooth radius on the back of the rabbet for easier
finishing. By varying the height and fence settings these door lip cutters can provide
different profiles.
R(1)
R(2)
# UP290
C
D
m
H
R(1)
R(2)
285
# UP291
C
SHAPER CUTTERS
m R1
H
R1
# UP292
C
D
R(1)
m
H
R(2)
# UP293
C
D
m
H
R(1)
R(2)
# UP294
C
D
245-322 Pages 8-28-06
8/31/06
2:35 PM
Page 286
Door Lip Cutters
(Continued)
m
Fixed Wing Cutters
H
R(1)
R(1)
# UP295
C
D
m
H
R(2)
R(1)
# UP296
C
D
R(1)
H R(2)
m
# UP297
C
D
286
Combination 1/4" & 1/2" Round Over Cutters
SHAPER CUTTERS
This cutter is actually two cutters in one. One part is a 1/4" rounding over cutter and
the other is a 1/2" rounding over cutter. It can also be used as a molding profile cutter
and a beading cutter.
Item
Number
EC044
UP004
Overall
Dia.(D)
2-7/8"
3-9/16"
Carbide
Height(H)
1"
1"
Large
Radius(R1)
1/2"
1/2"
Small
Radius(R2)
1/4"
1/4"
Bore
Diameter
3/4"
1-1/4"
Number of Wings = 3
D
R(2)
H
R(1)
# EC044
# UP004
245-322 Pages 8-28-06
8/31/06
2:35 PM
Page 287
Convex Radius Cutters
Item
Number
EC101
EC102
EC103
EC104
EC105
UP101
UP102
UP103
UP104
UP105
UP106
UP107
UP108
UP109
UP110
Overall
Dia.(D)
2-7/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-5/8"
4"
Carbide
Height(H)
1/4"
3/8"
1/2"
5/8"
3/4"
1/4"
3/8"
1/2"
5/8"
3/4"
7/8"
1"
1-1/4"
1-1/2"
2"
Large
Radius(R)
1/8"
3/16"
1/4"
5/16"
3/8"
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
1"
Bore
Diameter
3/4"
3/4"
3/4"
3/4"
3/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
Fixed Wing Cutters
These computer balanced three-wing cutters are a necessity to anyone who has a
shaper. They can be used for cutting flutes and coves. Available in the most popular
sizes in both 3/4" and 1-1/4" bore.
Number of Wings = 3
D
H R
287
R 3/16"
R 1/8"
R 5/16"
R 1/4"
# EC101
# UP101
# EC102
# UP102
# EC104
# UP104
# EC103
# UP103
# EC105
# UP105
R 7/16"
R 1/2"
R 5/8"
R 3/4"
R 1"
# UP106
# UP107
# UP108
# UP109
# UP110
SHAPER CUTTERS
R 3/8"
245-322 Pages 8-28-06
8/31/06
2:35 PM
Page 288
Concave Radius Cutters
These computer balanced three-wing cutters are a necessity to anyone who has a
shaper. They can be used for cutting beads and rounding the end of boards. Available
in the most popular sizes for both 3/4" and 1-1/4" bore.
Fixed Wing Cutters
Item
Number
EC120
EC121
EC122
EC123
EC124
UP120
UP121
UP122
UP123
UP124
UP125
UP126
UP127
UP128
UP129
Overall
Dia.(D)
2-7/8"
2-7/8"
2-7/8"
2-7/8"
2-7/8"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-5/8"
4"
4-3/8"
4-11/16"
5-1/8"
Carbide
Height(H)
5/8"
25/32"
15/16"
1-1/8"
1-1/4"
21/32"
13/16"
31/32"
1-1/8"
1-9/32"
1-13/32"
1-39/64"
1-51/64"
2-7/64"
2-39/64"
Large
Radius(R)
1/8"
3/16"
1/4"
5/16"
3/8"
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
1"
Bore
Diameter
3/4"
3/4"
3/4"
3/4"
3/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
Number of Wings = 3
D
H R
288
SHAPER CUTTERS
R 1/8"
# EC120
# UP120
R 1/4"
R 3/16"
# EC121
# UP121
# EC122
# UP122
R 3/8"
R 5/16"
# EC123
# UP123
# EC124
# UP124
R 7/16"
R 1/2"
R 1"
R 3/4"
R 5/8"
# UP125
# UP126
# UP127
# UP128
# UP129
245-322 Pages 8-28-06
8/31/06
2:35 PM
Page 289
Combination Convex & Concave Cutters
Item
Number
UP130
UP131
UP132
UP133
UP134
UP135
UP136
UP137
UP138
UP139
Overall
Dia.(D)
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-9/16"
3-5/8"
4-1/4"
4-11/16"
4-11/16"
5-1/8"
Carbide
Height(H)
9/16"
19/32"
3/4"
63/64"
1-1/64"
1-1/8"
1-23/64"
1-35/64"
1-53/64"
2-1/4"
Large
Radius(R)
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
5/8"
3/4"
1"
Fixed Wing Cutters
Freud's Combination Convex & Concave Cutters offer maximum versatility because
they will cut half round beads, quarter round beads, coves, and rounding over cuts.
These bits are great for making drop leaf tables by creating mating profiles with one
cutter.
Bore
Diameter
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
Number of Wings = 3
D
H
R
289
# UP131
# UP130
R 5/16"
R 1/4"
# UP132
# UP133
R 7/16"
R 3/8"
SHAPER CUTTERS
R 3/16"
R 1/8"
# UP135
# UP134
R 1/2"
R 3/4"
R 5/8"
R 1"
# UP136
# UP137
# UP138
# UP139
245-322 Pages 8-28-06
8/31/06
2:35 PM
Page 290
Roman Ogee Cutters
The Roman Ogee pattern of edge treatments will lend an air of classical styling to any
piece. The pattern can also be changed by raising or lowering the spindle.
Fixed Wing Cutters
Item
Number
EC005
UP005
Overall
Dia.(D)
2-7/8"
3-5/8"
Carbide
Height(H)
25/32"
45/64"
Minor
Height(m)
9/32"
13/64"
Large
Radius(R)
15/64"
15/64"
Bore
Diameter
3/4"
1-1/4"
Number of Wings = 3
D
m
H
R
# EC005
# UP005
Matched Reverse Detail Cutters
These cutters have perfectly matched profiles which enable both the molding cut and
a matching coping cut with the same cutter.
290
NEW
SHAPER CUTTERS
NEW
Item
Number
UC282
UC285
UP280
UP281
UP282
UP283
UP284
UP285
UP286
UP287
UP288
Overall
Cut
Carbide
3-11/32"
5/8"
1-1/32"
3-11/32" 15/32"
1"
3-15/16" 25/64"
1-3/32"
3-15/16" 15/32"
1-3/32"
3-15/16"
5/8"
1-3/32"
3-15/16" 33/64"
63/64"
3-15/16" 43/64"
63/64"
3-15/16" 15/32"
63/64"
3-15/16"
3/4"
63/64"
3-15/16" 19/32"
63/64"
4-1/8"
5/8"
63/64"
Minor
Height(m)
1/2"
19/32"
23/64"
5/16"
1/2"
33/64"
33/64"
19/32"
23/64"
3/4"
17/64"
Large
Radius(R)
15/64"
15/64"
11/64"
5/32"
15/64"
13/64"
23/64"
15/64"
23/64"
5/16"
–
Angle
(A)
–
–
–
–
–
–
–
–
–
–
23°
Bore
Diameter
3/4"
3/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
Number of Wings = 3
D
D
R
m
H
H
m
R
C
R
C
# UP281
# UP280
8/31/06
2:35 PM
Page 291
Matched Reverse Detail Cutters
(Continued)
D
H
D
H
m
R
C
m
C
R
# UP283
#UC282, #UP282
D
D
H
m
H
C
R
Fixed Wing Cutters
245-322 Pages 8-28-06
m
C
R
291
#UC285, #UP285
# UP284
H
R
H
m
C
m
C
R
# UP286
# UP287
D
H
m
# UP288
C
SHAPER CUTTERS
D
D
245-322 Pages 8-28-06
8/31/06
2:36 PM
Page 292
Multi-Profile Cutters
These cutters produce a countless number of molding profiles. The beautiful profiles
are created by varying the height and fence setting. By making multiple passes, a
countless number of moldings can be made.
Fixed Wing Cutters
Item
Number
PK1
PK2
Overall
Cut
Carbide
3-3/4"
1/8"
1-15/16"
4-23/32"
1/8"
1-15/16"
Minor
Height(m)
1/2"
1/2"
Large
Radius(R)
25/64"
25/64"
Angle
(A)
5/16"
5/16"
Bore
Diameter
3/4"
1-1/4"
Number of Wings = 3
D
m
R(2)
H
R(2)
R(1)
C
292
3/4" Stock Male & Female Cabinet Door Cutter Sets
SHAPER CUTTERS
These male & female cutter sets are perfect for the high production needs of a cabinet
or door shop. Shims are included to ensure perfectly fitted joints through many
sharpenings. Each cutter is balanced, and has thick carbide tips for maximum
sharpening life.
Item
Number
EC260
UP260
Overall
Cut
Carbide
Tenon
Tenon
Large
Dia.(D) Depth(C) Height(H) Thickness(T) Length(L) Radius(R)
2-7/16" 15/64"
1"
15/64"
7/16"
15/64"
3-9/16" 15/64"
1"
15/64"
7/16"
15/64"
See Bushing & Rub Collars for Bore Selection
Bore Rub Collar
Dia.
Number
3/4"
RC-001
1-1/4" RC30#
Number of Wings=3
Number of Pieces=4
D
C
R
H T
# EC260
# UP260
# EC260
# UP260
L
245-322 Pages 8-28-06
8/31/06
2:36 PM
Page 293
Item
Number
EC261
UP261
Overall
Cut
Dia.(D) Depth(C)
2-11/16" 11/32"
3-9/16" 11/32"
Carbide
Tenon
Height(H) Thickness(T)
1"
29/32"
15/64"
15/64"
Tenon
Large
Small
Bore
Length(L) Radius(R1) Radius(R2) Dia.
7/16"
7/16"
9/32"
9/32"
11/64" 3/4"
11/64" 1-1/4"
Rub Collar
Number
RC-001
RC30#
Number of Wings=3
Number of Pieces=4
D
R(1)
C
R(2)
H
Fixed Wing Cutters
sharpening life.
T
# EC261
# UP261
# EC261
# UP261
L
293
Item
Number
UP262
Overall
Cut
Carbide
Tenon
Tenon
Large
3-9/16" 15/64" 1-1/16"
15/64"
7/16"
1/8"
D
C
R
H
T
# UP262
# UP262
L
Bore Rub Collar
Dia.
Number
1-1/4" RC30#
Number of Wings=3
Number of Pieces=6
SHAPER CUTTERS
sharpening life.
245-322 Pages 8-28-06
8/31/06
2:36 PM
Page 294
Fixed Wing Cutters
sharpening life.
Item
Overall
Cut
Carbide
Tenon
Tenon
Large
Number Dia.(D) Depth(C) Height(H) Thickness(T) Length(L) Radius(R)
EC263 2-11/16" 11/32"
1"
15/64"
7/16"
9/32"
UP263
3-9/16" 11/32"
1"
15/64"
7/16"
9/32"
Bore Rub Collar
Dia.
Number
3/4"
RC-001
1-1/4" RC30#
Number of Wings=3
Number of Pieces=4
D
C
H
R
T
# EC263
# UP263
294
# EC263
# UP263
L
SHAPER CUTTERS
sharpening life.
Item
Number
UP264
Overall
Cut
Carbide
Tenon
Tenon
Large
3-9/16" 11/32"
1"
15/64"
7/16"
9/64"
Bore Rub Collar
Dia.
Number
1-1/4" RC30#
Number of Wings=3
Number of Pieces=4
D
C
H
R
T
# UP264
# UP264
L
245-322 Pages 8-28-06
8/31/06
2:36 PM
Page 295
Item
Number
UP265
Overall
Cut
Carbide
Tenon
Tenon
Large
3-9/16" 15/64" 63/64"
15/64"
7/16"
13/64"
Bore Rub Collar
Dia.
Number
1-1/4" RC30#
Number of Wings=3
Number of Pieces=4
D
C
R
H
T
# UP265
Fixed Wing Cutters
sharpening life.
# UP265
L
Glass Door Cutter For EC260, EC261, & EC263
295
Item
Number
OPT260
Overall
Dia.(D)
2-53/64"
Cut
Depth(C)
7/16"
Carbide
Height(H)
15/32"
Bore
Diameter
3/4"
Number of Wings = 3
# OPT260-1
# EC260
# EC260
H
H
C
D
# OPT260-2
SHAPER CUTTERS
Use this set of cutters with EC260, EC261, or EC263 to make rabbets required in the
back of doors for glass panels. Secure glass in place with a small piece of molding.
245-322 Pages 8-28-06
8/31/06
2:36 PM
Page 296
1" Stock Male & Female Door Cutter Set
Fixed Wing Cutters
This male & female cutter set makes a molding cut on both sides of the rail and stile.
Ideal for lightweight doors or divider screens. Shims are included to ensure perfectly
fitted joints through many sharpenings. Each cutter is balanced, and has thick carbide
tips for maximum sharpening life.
Item
Number
UP268
Overall
Cut
Carbide
Tenon
Tenon
Large
3-9/16" 23/64" 1-3/16"
15/64"
7/16"
5/32"
Bore Rub Collar
Dia.
Number
1-1/4" RC30#
Number of Wings=3
Number of Pieces=6
D
C
R
H T
# UP268
# UP268
L
1" Stock Male & Female Door Cutter Sets
296
SHAPER CUTTERS
These male & female cutter sets makes a molding cut on both sides of the rail and
stile. Ideal for lightweight doors or divider screens. Shims are included to ensure
perfectly fitted joints through many sharpenings. Each cutter is balanced, and has
thick carbide tips for maximum sharpening life.
Item
Overall
Cut
Number Dia.(D) Depth(C)
EC266 2-27/32" 15/64"
UP266
3-9/16" 15/64"
Carbide
Tenon
Tenon
Large
Height(H) Thickness(T) Length(L) Radius(R)
1-3/16"
15/64"
7/16"
15/64"
1-3/16"
15/64"
7/16"
15/64"
Bore Rub Collar
Dia.
Number
3/4"
RC-001
1-1/4" RC30#
Number of Wings=3
Number of Pieces=6
D
C
R
H
# EC266
# UP266
T
L
# EC266
# UP266
245-322 Pages 8-28-06
8/31/06
2:36 PM
Page 297
1" Stock Male & Female Door Cutter Set
Item
Number
UP267
Overall
Cut
Carbide
Tenon
Tenon
Large
3-9/16" 11/32" 1-11/32"
15/64"
7/16"
9/32"
Bore Rub Collar
Dia.
Number
1-1/4" RC30#
Number of Wings=3
Number of Pieces=6
D
C
R
H T
# UP267
Fixed Wing Cutters
This male & female cutter set makes a molding cut on both sides of the rail and stile.
Ideal for lightweight doors or divider screens. Shims are included to ensure perfectly
fitted joints through many sharpenings. Each cutter is balanced, and has thick carbide
tips for maximum sharpening life.
# UP267
L
Classical Profile Interior Door Cutter Sets
297
Item
Number
EC090
UP090
Overall
Dia.(D)
2-7/8"
3-9/16"
Carbide
Height(H)
23/64"
23/64"
Minor
Tenon
Height(m) Thickness(T)
1-37/64"
15/64"
1-27/64"
15/64"
Large
Radius(R)
9/64"
1/8"
Bore
Diameter
3/4"
1-1/4"
Number of Wings=3
Number of Pieces=6
D
C
H m
T
# EC090
# UP090
R
# EC090
# UP090
SHAPER CUTTERS
These cutter sets cut a classical pattern rail and stile for standard 1-3/8" thick interior
doors. Cuts both the molding cut and the coping cut. Shims are included to ensure
perfectly fitted joints through many sharpenings.
245-322 Pages 8-28-06
8/31/06
2:36 PM
Page 298
1-3/8" Stock Male & Female Interior Door Cutter Sets
Fixed Wing Cutters
This male & female cutter set cuts a cove and bead pattern on both sides of the rail
and stile. Ideal for interior doors. Shims are included to ensure perfectly fitted joints
through many sharpenings. Each cutter is balanced, and has thick carbide tips for
maximum sharpening life.
Item
Number
UP269
Bore Rub Collar
Dia.
Number
1-1/4" RC20#
Number of Wings=3
Number of Pieces=6
D
L
H m T
# UP269
298
Overall
Cut
Carbide
Tenon
Tenon
Large
3-9/16" 1-37/64"
7/8"
15/64"
33/64"
13/64"
# UP269
R
1-3/8" Stock Male & Female Interior Door Cutter Sets
These male & female cutter sets cut a bead pattern on both sides of the rail and stile.
Ideal for interior doors. Shims are included to ensure perfectly fitted joints through
many sharpenings. Each cutter is balanced, and has thick carbide tips for maximum
sharpening life.
SHAPER CUTTERS
Item
Overall Carbide
Tenon
Tenon
Large
Bore
Rub Col.
Number Dia.(D) Height(H) Thickness(T) Length(L) Radius(R) Diameter Number
EC270 2-27/32" 1-37/64"
15/64"
33/64"
5/16"
3/4"
RC-001
UP270 3-9/16" 1-37/64"
15/64"
33/64"
5/16"
1-1/4"
RC20#
Number of Wings=3
Number of Pieces=6
D
R
H T
# EC270
# UP270
# EC270
# UP270
L
245-322 Pages 8-28-06
8/31/06
2:36 PM
Page 299
1-3/8" Stock Male & Female Interior Door Cutter Set
Item
Number
UP272
Overall Carbide
Tenon
Tenon
Large
Bore
Rub Col.
Dia.(D) Height(H) Thickness(T) Length(L) Radius(R) Diameter Number
3-9/16"
1-1/2"
15/64"
17/32"
3/16"
1-1/4"
RC20#
Number of Wings=3
Number of Pieces=6
D
R
H T
# UP272
Fixed Wing Cutters
This male & female cutter set cuts an ogee pattern on both sides of the rail and stile.
Ideal for interior doors. Shims are included to ensure perfectly fitted joints through
sharpening life.
# UP272
L
Cove & Bead Exterior Door Cutter Sets
299
Item
Number
EC091
UP091
Overall
Tenon
Carbide
Tenon
Large
Small
Bore
Dia.(D) Length(L) Height(H) Thickness(T) Radius(R) Radius(2) Dia.
2-7/8"
1/2"
1-47/64"
15/64"
21/64"
9/32"
3/4"
3-9/16"
1/2"
1-47/64"
15/64"
21/64"
9/32"
1-1/4"
Number of Wings=3
Number of Pieces=6
D
R(1)
R(2)
H T
# EC091
# UP091
L
# EC091
# UP091
SHAPER CUTTERS
Make beautiful exterior doors with these cutter sets. Designed for the rails and stiles
of standard 1-3/4" thick exterior doors, these cutters will cut both the molding cut and
the coping cut. Shims included for precise adjustment.
245-322 Pages 8-28-06
8/31/06
2:36 PM
Page 300
1-3/4" Stock Male & Female Exterior Door Cutter Set
Fixed Wing Cutters
This male & female cutter set cuts a cove and bead pattern on both sides of the rail
and stile. Ideal for exterior doors. Shims are included to ensure perfectly fitted joints
Item
Overall Carbide Minor
Tenon
Large
Tenon
Number Dia.(D) Height(H) Height(m) Thickness(T) Radius(R) Length(L)
UP273 3-13/16" 1-27/32" 1-29/64"
15/64"
43/64"
15/64"
Bore Rub Collar
Dia.
Number
1-1/4" RC20#
Number of Wings=3
Number of Pieces=6
D
R
Hm T
# UP273
# UP273
L
300
1-3/4" Stock Male & Female Exterior Door Cutter Sets
These male & female cutter sets cut a bead pattern on both sides of the rail and stile.
Ideal for exterior doors. Shims are included which ensures perfect joint maintenance
SHAPER CUTTERS
Item
Number
EC274
UP274
Overall
Dia.(D)
2-27/32"
3-9/16"
Carbide
Tenon
Tenon
Large
Bore
Rub Col.
Height(H) Thickness(T) Length(L) Radius(R) Diameter Number
1-31/32"
15/64"
33/64"
25/64"
3/4"
RC-001
1-31/32"
15/64"
33/64"
25/64"
1-1/4"
RC20#
Number of Wings=3
Number of Pieces=6
D
R
H T
# UP274
L
# UP274
245-322 Pages 8-28-06
8/31/06
2:36 PM
Page 301
1-3/4" Stock Male & Female Exterior Door Cutter Set
Item
Number
UP275
Overall Carbide
Minor
Tenon
Tenon
Large
Dia.(D) Height(H) Height(m) Thickness(T) Length(L) Radius(R)
3-9/16" 2-3/64" 1-29/64"
15/64"
33/64"
1/4"
Bore Rub Collar
Dia.
Number
1-1/4" RC20#
Number of Wings=3
Number of Pieces=6
Fixed Wing Cutters
This male & female cutter set cuts an ogee pattern on both sides of the rail and stile.
Ideal for exterior doors. Shims are included to ensure perfectly fitted joints through
sharpening life.
D
R
H m
T
301
L
# UP275
SHAPER CUTTERS
# UP275
245-322 Pages 8-28-06
8/31/06
2:36 PM
Page 302
2+2 Raised Panel Cutters
Fixed Wing Cutters
Freud's exclusive 2+2 Raised Panel Cutters produce raised panels that are glass smooth, even on
cross grain with no splintering at the top of the profile edge.
Freud's engineers have set two wings to do the main cutting of the profile, while two others cut the
top part of the profile. As seen in the illustration below, the large wing is set at a slightly positive hook
angle (A), and a positive shear angle (B). This slices the wood from the main part of the profile (C),
leaving a glass smooth finish. The two smaller wings, set at a steep positive hook angle (D), are sized
so the outside diameter is slightly larger than the large wings (E). These small wings are also designed
with a negative sheer angle (F). This allows the small wing to cut the vertical part of the profile with
a down slicing action (G), pushing down all the wood fibers at the top of the panel and cleanly slicing
them off. This leaves none of the fuzz associated with standard three-wing cutters.
D.
SHAPER CUTTERS
302
E.
A.
+
Positive
Negative
F.
B.
-
G.
The small wing pushes down on the
wood fibers to shear them off for a
perfect splinter free edge.
C.
The large wing shears up for a perfect
finish on the raised panel profile.
245-322 Pages 8-28-06
8/31/06
2:36 PM
Page 303
2+2 Raised Panel Cutters For 5/8" Stock
NEW
NEW
NEW
NEW
NEW
NEW
Item
Number
UC200
UP200
UC201
UP201
UC202
UP202
UC203
UP203
UC204
UP204
UP205
UP206
UC207
UP207
UC208
UP208
Overall Carbide Minor
Large
Small
Dia.(D) Height(H) Height(m) Radius(R1) Radius(R2)
4-15/16" 5/8"
15/64"
1-29/32"
–
5-1/2"
5/8"
15/64"
1-29/32"
–
4-15/16" 5/8"
23/64"
–
–
5-1/2"
5/8"
23/64"
–
–
4-15/16" 33/64"
–
1/8"
–
5-1/2"
5/8"
3/8"
1/8"
–
4-15/16" 5/8"
3/8"
1-9/16"
1/8"
5-1/2"
5/8"
3/8"
1-9/16"
1/8"
4-15/16" 5/8"
5/32"
9/16"
–
5-1/2"
5/8"
5/32"
9/16"
–
5-1/2"
5/8"
9/64"
1/8"
–
5-1/2"
5/8"
3/8"
9/64"
–
4-15/16" 5/8"
3/8"
5/32"
–
5-1/2"
5/8"
3/8"
5/32"
–
4-15/16" 5/8"
13/32"
1-5/16"
1-15/16"
5-1/2"
5/8"
13/32"
1-5/16"
1-15/16"
Angle
(A)
–
–
12°
12°
12°
–
–
–
7°
7°
–
–
4°
4°
28°
28°
Bore Rub Collar
Dia.
Number
3/4"
RC-002
1-1/4" RC10#
1-1/4" RC-002
1-1/4" RC10#
3/4"
RC-002
1-1/4" RC10#
3/4"
RC-002
1-1/4" RC10#
3/4"
RC-002
1-1/4" RC10#
1-1/4" RC10#
1-1/4" RC10#
3/4"
RC-002
1-1/4" RC10#
3/4"
RC-002
1-1/4" RC10#
Fixed Wing Cutters
These 2+2 raised panel cutters are designed for 5/8" thick panels. All 1-1/4" bore
cutters can be used with back-cutters UP230 and UP231 when using 3/4" stock. All
3/4" bore cutters can be used with back-cutters UC230 and UC231 when using with
3/4" stock.
Number of Wings= 2+2
D
#UC200
#UP200
m
Cutter
# UC200
# UP200
H
R(1)
303
Small Cutter Outline
D
Cutter
# UC201
# UP201
m
H
R(1)
A
D
# UC202
# UP202
Cutter
# UC202
# UP202
H
R(1)
A
D
# UC203
# UP203
m
Cutter
# UC203
# UP203
H
R(2)
R(1)
SHAPER CUTTERS
#UC201
#UP201
245-322 Pages 8-28-06
8/31/06
2:36 PM
(Continued)
Page 304
D
Fixed Wing Cutters
# UC204
# UP204
Cutter
# UC204
# UP204
H
m
A
R(1)
D
# UP205
Cutter
# UP205
H
m
R(1)
D
# UP206
304
m
Cutter
# UP206
H
SHAPER CUTTERS
R(1)
D
# UC207
# UP207
Cutter
# UC207
# UP207
m
H
A
R(1)
D
# UC208
# UP208
m
Cutter
# UC208
# UP208
H
R(2)
A
R(1)
245-322 Pages 8-28-06
8/31/06
(Continued)
2:36 PM
Page 305
Backcutter For Double Raised Panels
NEW
NEW
Item
Number
UC230
UP230
UC231
UP231
Overall
Dia.(D)
3-11/32"
3-15/16"
3-45/64"
4-9/32"
Carbide
Height(H)
3/8"
3/8"
3/8"
3/8"
Large
Radius(R)
13/64"
13/64"
–
–
R
–
–
45°
45°
Bore
Diameter
3/4"
1-1/4"
3/4"
Number of1-1/4"
Wings = 3
Spacer
# UC230
# UCP30
H
# UC230
# UP230
Angle
Fixed Wing Cutters
Freud's back-cutters are designed to be used with Freud's 2+2 Raised Panel Cutters
when cutting 3/4" stock. Use the 1-1/4" bore cutters with Panel Cutters UP200
through UP208. Use 3/4" bore cutters with Panel Cutters UC200 through UC208.
These cutters leave a decorative profile on the back side of the panel making the
panel flush with both the front and back of the rails and stiles.
Backcutter
D
A
H
# UC231
# UP231
Backcutter
Spacer
# UC231
# UP231
D
SHAPER CUTTERS
305
245-322 Pages 8-28-06
8/31/06
2:36 PM
Page 306
Fixed Wing Cutters
These 2+2 raised panel cutters are designed for 3/4" thick panels. The small cutter,
with opposite shear angle, will push wood fibers down and shear them off leaving a
crisp edge at the top of the panel, even on cross grain.
NEW
NEW
NEW
Item
Number
UC209
UP209
UC210
UP210
UC211
UP211
UC212
UP212
UC213
UP213
UP214
UC215
UP215
UP216
UP217
UP218
UP219
UP220
UC221
UP221
UP222
UC223
UP223
Overall
Dia.(D)
4-15/16"
51/2"
4-15/16"
5-1/2"
4-15/16"
5-1/2"
4-15/16"
5-1/2"
4-15/16"
5-1/2"
5-1/2"
4-15/16"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
4-15/16"
5-1/2"
5-1/2"
4-15/16"
5-1/2"
Carbide Minor
Large
Small
Height(H) Height(m) Radius(R1) Radius(R2)
43/64"
1/8"
1-57/64"
–
5/8"
5/64"
1-57/64"
–
23/32" 23/64"
1-15/32"
1/8"
5/8"
9/32"
1-15/32"
1/8"
5/8"
15/64"
–
–
5/8"
15/64"
–
–
17/32"
–
13/64"
–
5/8"
–
13/64"
–
11/16" 21/64"
1-31/32"
1-3/8"
5/8"
9/32"
1-31/32"
1-3/8"
5/8"
21/64"
13/64"
1/8"
5/8"
15/64"
13/64"
–
5/8"
15/64"
13/64"
–
5/8"
1/4"
9/64"
–
5/8"
15/64"
11/64"
9/64"
5/8"
1/4"
5/32"
9/64"
5/8"
9/32"
1/8"
–
5/8"
15/64"
9/32"
5/32"
5/8"
15/64"
9/64"
1/8"
5/8"
15/64"
9/64"
1/8"
5/8"
15/64"
1/8"
–
5/8"
13/64"
5/32"
1/8"
5/8"
13/64"
5/32"
1/8"
Angle
(A)
–
–
–
–
17°
17°
13°
13°
23°
23°
–
10°
10°
–
7.5°
–
–
–
4°
4°
–
10°
10°
Bore Rub Collar
Dia.
Number
3/4"
RC-002
1-1/4" RC10#
3/4"
RC-002
1-1/4" RC10#
3/4"
RC-002
1-1/4" RC10#
3/4"
RC-002
1-1/4" RC10#
3/4"
RC-002
1-1/4" RC10#
1-1/4" RC10#
3/4"
RC-002
1-1/4" RC10#
1-1/4" RC10#
1-1/4" RC10#
1-1/4" RC10#
1-1/4" RC10#
1-1/4" RC10#
3/4"
RC-002
1-1/4" RC10#
1-1/4" RC10#
3/4"
RC-002
1-1/4" RC10#
Number of Wings= 2+2
D
306
m
# UC209
# UP209
Cutter
# UC209
# UP209
H
SHAPER CUTTERS
R1
D
# UC210
# UP210
m
Cutter
# UC210
# UP210
H
R(1)
D
# UC211
# UP211
m
Cutter
# UC211
# UP211
H
A
245-322 Pages 8-28-06
8/31/06
(Continued)
2:36 PM
Page 307
D
# UC212
# UP212
Cutter
# UC212
# UP212
H
R(1)
A
D
# UC213
# UP213
m
Cutter
# UC213
# UP213
H
A
R(1)
R(2)
Fixed Wing Cutters
D
# UP214
m
Cutter
# UP214
H
R(2)
R(1)
307
D
m
Cutter
# UC215
# UP215
H
R(1)
A
D
# UP216
m
Cutter
# UP216
H
R(1)
D
# UP217
m
H
A
R(2)
R(1)
Cutter
# UP217
SHAPER CUTTERS
# UC215
# UP215
245-322 Pages 8-28-06
8/31/06
2:36 PM
(Continued)
Page 308
D
Fixed Wing Cutters
# UP218
m
Cutter
# UP218
H
R(2)
R(1)
D
# UP219
m
Cutter
# UP219
H
R(1)
D
# UP220
m
Cutter
# UP220
H
R(2)
R(1)
308
D
# UC221
# UP221
m
Cutter
# UC221
# UP221
H
SHAPER CUTTERS
R(1)
A
R(2)
D
# UP222
m
Cutter
# UP222
H
R1
D
# UC223
# UP223
m
Cutter
# UC221
# UP223
H
R(1)
A
R(2)
245-322 Pages 8-28-06
8/31/06
2:37 PM
Page 309
2+2 Raised Panel Cutter For Double-Sided Panels
Item
Number
UP016
Overall
Dia.(D)
5-1/2"
Carbide
Height(H)
5/8"
Large
Radius(R)
1/8"
Angle
6°
Bore
Diameter
1-1/4"
Number of Wings = 2+2
D
H
# UP016
Cutter
# UP016
R
A
Vertical Raised Panel Cutter
Fixed Wing Cutters
This 2+2 Raised Panel cutter is ideal for double-sided raised panel interior and
exterior doors.
309
Item
Number
UP003
Overall
Dia.(D)
3-9/16"
Carbide
Height(H)
1-57/64"
Large
Radius(R)
5/64"
Angle
6°
Bore
Diameter
1-1/4"
Number of Wings = 3
R
A
H
D
# UP003
Cutter
# UP003
SHAPER CUTTERS
Freud's Vertical Raised Panel Cutters are designed to provide a full profile reveal,
while keeping cutter diameter to a minimum. This reduces the stress on the spindle
and will work well on lower powered shapers.
245-322 Pages 8-28-06
8/31/06
2:37 PM
Page 310
The “Duplex” Multi-Profile Raised Panel Cutter
Fixed Wing Cutters
The Duplex Raised Panel Cutter has the flexibility to create custom raised panel
profiles with just one cutter. It can create eight different profiles using only one pass.
Different profiles can be obtained by running the stock over or under the head and
changing the height of the cutter.
Item
Overall
Cut
Carbide
Number Dia.(D) Depth(C) Height(H)
FD72M 5-29/32" 1-7/8" 1-5/64"
Minor
Large
Small Angle
Height(m) Radius(R1) Radius(R2)
3/32"
5/32"
1/8"
3.5°
Bore
Dia.
1-1/4"
Number of Wings = 3
# FD72M
# FD72M
# FD72M
# FD72M
310
R(2)
m
Cutter
# FD72M
SHAPER CUTTERS
H
A
R(1)
C
# FD72M
D
# FD72M
# FD72M
# FD72M

Freud 2007-2008 Catalog

Transcription

Similar documents

freud - Ballew Saw and Tool

Product Catalogue - Chain and Drives

glr:1 - thegaleri.co.za

CARSOFT Mercedes Ultimate Home V12 SPECIFICATIONS