MTX 2004.indd

MTX is a trademark of MITEK Corporation USA.
ZONE
Amps
TH1501d
TH8010d
TH421d
TH311d
TH251d
TH942
TH502
TH342
TH282
TH202
TH1004
TH684
TH564
TH404
TH895
Subs
T4508-04
T4510-04
T4510-44
T4512-04
T4512-44
T4515-04
T4515-44
www.mitekeurope.com - www.mtx.com
Boxes
T4510a
T4512a
T4515a
T4510x2a
T4512x2a
T4510x3a
Subs
T5508-04
T5508-44
T5510-04
T5510-44
T5512-04
T5512-44
T5515-04
T5515-44
Boxes
T5510a
T5510d
T5512a
T5512d
T5510x2a
T5510x2d
T5512x2a
T5512x2d
T5510x3a
T5510x3d
Subs
T7510-04
T7510-44
T7512-04
T7512-44
T7515-04
T7515-44
Boxes
T7510a
T7512a
T7510x2a
T7510x2d
T7512x2a
T7512x2d
T7510x3a
T7510x3d
Subs
T8510-04
T8510-44
T8512-04
T8512-44
T8515-04
T8515-44
Boxes
T8510a
T8510d
T8512a
T8512d
T8515a
T8515d
T8510x2a
T8510x2d
T8512x2a
T8512x2d
Subs
T9510-04
T9510-44
T9512-04
T9512-44
T9515-04
T9515-44
Boxes
T9510a
T9510d
T9512a
T9512d
T9515a
T9515d
T9510x2d
T9512x2d
T9515x2d
TECHNOLOGIES
TECHNOLOGY #2
Pure N-Channel
Design
TECHNOLOGY #1 : ISMT
(Inteligent Surface Mont Technologie)
= SMD components + Intelligent Cellular Appraoch
Canal #1
Canal #2
Entrées Gain
Filtre
Alimentation
ISMT board (SMD components)
CELLULAR APROACH
• Enhances the electrical properties
• Minimises inductance and resistance
in the circuit
• Larger copper strands where more
power is needed
• Each part (cell) is independent
• Minimises radiation and interferance
between cells
• Better signal to noise ratio
• No wire jumpers
• Components are smaller and
Traditional board
have lower values
(Discrete components)
SMD (Surface Mouted Device)
• Modern components
• Components are smaller and lighter
• Better contact with the board,
less sensitive to vibrations
• Larger electrical contact surface
• Shorter signal path
• Better heat dissicipation
• Higher efficiency
• Efficient and non agressive
soldering method (oven)
• More space on the board
DISCRETE COMPONENTS
• Old fashioned components
• Large and heavy
• The legs go through the board, more
sensitive to vibrations
• Low efficiency
• Delicate soldering process, more
«bad» soldered points
X
www.mitekeurope.com - www.mtx.com
PURE N-CHANNEL V-FET FINAL STAGE
• N&P Circuits are using the same
type Mosfets
• No variations between the output
transistors in the final stage
• Higher efficiency
• Higher linearity, lower distortion
• Shorter signal path
• Better sound quality
• Higher power output
TECHNOLOGY #4 : ALDS
(Asymmetrical Linear Drive System)
= flat progressive spider + extended
pole piece
USABLE POWER COMPARISON
N&P-Channel
The usable power in the P-Channel
circuit is 10x lower than in the
N-channel circuit at 100°c.
TECHNOLOGY #3
Adaptive ClassD Technology
This technology changes the power supply switching frequency with increasing
output power to avoid interference due to the Class D technology. The principle is to
separate the sound from radio interference as much as possible.
With the Adaptive ClassD tech.
radio interference is minimized
to zero. Sound quality is maximized.
X
Without the Adaptive ClassD
Tech. radio interferances are
easely audible. Sound quality
decreases
TECHNOLOGY #5 :
SPV
(Spider Plateau Venting)
EXTENDED
POLE PIECE
The extended
pole piece, creates
a more symmetrical
magnetic flux in
the gap. This means
higher efficiency and
larger linear excursion.
The extended pole piece
also acts as a guide, when the
cone moves beyond maximum
excursion (you know, after a
big bass knock..). The voice coil
can’t get out of the gap. Your sub
is safe!
FORCED AIR COOLING OF THE VOICE COIL
Spider Plateau Venting is characterized
by vented aluminium grills. These grills
surround the
voice coil between the motor
structure
and the spider,
the area of the
woofer that gets the hottest. Air is directed
in and out of this key area allowing the
woofer to handle lots of power while keeping the voice coil cool. Cool air is sucked
through these large vents, from all angles,
directly onto the voice coil as the cone
moves forward. As the cone moves backward, it pushes hot air out, forcing it off of
the voice coil. By aiming a large amount
of cool air directly at the voice coil, we
create an extremely efficient and effective
self-cooling cycle that ensures the woofer
can play longer and perform better than
subwoofers employing traditional venting
techniques.
TECHNOLOGY #6 : CET
(Congruent Edge Technology)
FLAT PRODRESSIVE SPIDER
With this technology, MTX gives you Doctor
Jekyll and Mister Hide !
The progressive spider gives you lots of
details at low volume (good music) and full
control at high volume (Booooom). As the
excursion increases, the spider is stiffer and
stiffer. The progressive spider is the opposite
of a standard spider. But in the car audio environnement, that’s what we need : details
at low volume and power handling at high
volume...
The Nitrile Butadiene Rubber surround and the gasket are made
in one piece. The one piece design of the NBR surround and
gasket gives the following advantages:
• The surround will not teare
• Maximum surface to glue the surround to the basket
• At maximum excursion the surround will not deform
• Very flexible surround
• Extremely resistant to the
effects of UV rays.
• Looks great
The MTX amplifiers have a huge reputation in the competition lanes. Delivering
quality, performance and reliability. This
succes is based on all the technologies developped by our own R&D department.
Like the high efficient Class D technology
delivering high power with low current
consumption. The solution for todays
power hungry bass systems. In the car we
have a very limited power supply (single
battery and alternator). MTX was the first
to introduce Class D amplification for
Bass. Today we have the 6th generation of
Class D amplifiers. The R&D departement
never gives up! Creating higher efficiency
and more power. Good for us.
The signal to noise ratio is all about quality
construction. More than 120dB! Is a kind
of record, try to find better.
These power blocs fear nothing: ISMT for
an optimised pc board and less interference, Better sound. Pure N-channel technology for higher efficiency and dynamic
performance, More Pooooower. Adaptive
ClassD, No interference just clean music.
Welcome to NASA!
More features than we can list. But some
of them are too cool not to mention: 1224dB/oct high or low pass x-over, EBC
port etc, compression circuit, 180° phase
switch for... (you know).
THUNDER DOMINATION!
TH1501d
TH801d
TH421d
TH311d
TH251d
TH942
TH502
TH342
TH282
TH202
TH1004
TH684
TH564
TH404
TH895
www.mitekeurope.com - www.mtx.com
Power
2Ω
1x1500W
1x800W
1x420W
1x310W
1x250W
2x470W
2x250W
2x170W
2x140W
2x100W
4x250W
4x170W
4x140W
4x100w
4x100W
+1x490W
Power
4Ω
1x750W
1x400W
1x210W
1x155W
1x125W
2x235W
2x125W
2x85W
2x70W
2x50W
4x125W
4x85W
4x70W
4x50W
4x50W
+1x245W
Bridged
Power
1x940W
1x500W
1x340W
1x280W
1x200W
2x500W
2x340W
2x280W
2x200W
2x200W
Low-Pass
High-Pass
X-over
X-over
24dB/oct
24dB/oct
24dB/oct
18dB/oct
18dB/oct
24dB/oct
12dB/oct
24dB/oct
12dB/oct
24dB/oct
12dB/oct
18dB/oct
18dB/oct
18dB/oct
18dB/oct
24dB (Av/Ar) 12dB (Av/Ar)
24dB (Av/Ar) 12dB (Av/Ar)
24dB (Av/Ar) 12dB (Av/Ar)
18dB/oct
18dB/oct
X-over
Frequency
40-200Hz
40-200Hz
40-200Hz
85Hz
85Hz
40-200Hz
40-200Hz
40-200Hz
85Hz
85Hz
40-200Hz
40-200Hz
40-200Hz
85Hz
85Hz (Av/Ar)
18dB (Sub) 18dB (Av/Ar)
40-200Hz (Sub)
EBC Compression Bass
option
circuit
Boost
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
(Sub)
RCA
Input
8volts
8volts
8volts
8volts
8volts
8volts
8volts
8volts
8volts
8volts
8volts
8volts
8volts
8volts
8volts
High level
input
yes
yes
yes
yes
yes
yes
yes
yes
Line
out
yes
yes
yes
yes
yes
x-over
x-over
x-over
yes
yes
yes
yes
yes
yes
MTX has been manufacturing subwoofers
for more than 30 years!
The technologies used create subs with
highest performance and best reliabilty.
More than we can ask for...
The T4500 raises the stake in its class.
ALDS: Extended Pole Piece and Flat Progressive Spider for a larger linear excursion and better control over the cone
when driven hard (Deep and Loud
Bass).
SPV: Forced Air Cooling of the
voice coil (Deep and Loud Bass
that continues when your body
gives up)
One piece Mica filled Expanded Polypropylene cone with
aluminium deposit (extreme
strong and light cone with no
dustcap)
Double 5-spoke basket designed
by MTX based on the rimms of a Corvette. High-end spring loaded connection
terminals. They rocks !
FEATURES
ALDS Technology
✔
SPV Technology
✔
CET Technology
Butyl Suspension
Polypro/Carbon cone
✔
Cone in 1 piece
✔
Sealed Compatible
✔
Vented Compatible
✔
Stitched Cone/suspension ✔
MTX basket
✔
Aluminium basket
StreetWires connectors
X-max (1 way)
9,4mm
Power handling
7/10
Size
T4508-04
T4510-04
T4510-44
T4512-04
T4512-44
T4515-04
T4515-44
20 cm
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
Impedance
4Ω
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
Max
Power
200W
450W
450W
450W
450W
500W
500W
www.mitekeurope.com - www.mtx.com
RMS
Power
100W
225W
225W
225W
225W
250W
250W
Sensitivity Xmax
85,6dB
87,6dB
90,4dB
89,8dB
92,1dB
89,3dB
91,4dB
5,4mm
9,4mm
9,4mm
9,4mm
9,4mm
9,4mm
9,4mm
Fs
39,8Hz
35,4Hz
39,1Hz
29,9Hz
29,2Hz
22,6Hz
24,5Hz
Magnet
Structure
450gr
850gr
850gr
1000gr
1000gr
1417gr
1417gr
Cone
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Response Depth
39-150Hz
35-150Hz
39-150Hz
29-150Hz
29-150Hz
22-150Hz
21-150Hz
9,1cm
12,2cm
12,2cm
13,5cm
13,5cm
16,8cm
16,8cm
Enclosure
Sealed-vented
Sealed-vented
Sealed-vented
Sealed-vented
Sealed-vented
Sealed-vented
Sealed-vented
Size
T4510a
T4512a
T4515a
T410x2a
T4512x2a
T4510x3a
25 cm
30 cm
38 cm
2x25 cm
2x30 cm
3x25 cm
Impedance
4Ω
4Ω
4Ω
4Ω
4Ω
4Ω
Max
Power
450W
450W
450W
900W
900W
1350W
RMS
Power
225W
225W
225W
450W
450W
675W
Sensi- Enclotivity
sure
90,6dB
SLH*
92,8dB
SLH*
94,1dB
SLH*
93,6dB
SLH*
95,8dB
SLH*
96,1dB
SLH*
* SledgeHammer
The evolution towards the T5500!
A 2x bigger magnet (1.7x to be exact but
still impressive!) the size is awsome.
A MTX designed super-strong steel basket
with oversized SPV windows. The SPV is
so large that you can see the voice coil
through ! Serious about cooling.
Next to ALDS the T5500 also has a spider with interlaced tinsel leads, no more
broken tinsel leads or leads ratteling
against the cone due to large excursions!
With this level of design and
the Deep Loud and Fast
Bass it delivers we are talking evolution at the max!
In the enclosure range,
you can see the new
SledgeHammer boxes. Try
the tri-sub enclosure (my
favorite) and you’ll stay in
your car forever !
A NEW SPECIES OF SUBWOOFERS!
FEATURES
ALDS Technology
✔
SPV Technology
✔
CET Technology
Butyl Suspension
✔
Polypro/Carbon cone
✔
Cone in 1 piece
✔
Sealed Compatible
✔
Vented Compatible
✔
Stitched Cone/suspension ✔
MTX basket
✔
Aluminium basket
StreetWires connectors
X-max (1 way)
14mm
Power handling
8/10
Size
Size
T5508-04
T5508-44
T5510-04
T5510-44
T5512-04
T5512-44
T5515-04
T5515-44
20 cm
20 cm
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
www.mitekeurope.com - www.mtx.com
Impe
dance
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
Max
Power
400W
400W
600W
600W
600W
600W
600W
600W
RMS
Power
200W
200W
300W
300W
300W
300W
300W
300W
Sensitivity Xmax
88,8dB
91,4dB
88,2dB
90,9dB
89,8dB
92,9dB
90,8dB
93,6dB
14mm
14mm
14mm
14mm
14mm
14mm
14mm
14mm
Fs
41,1Hz
42,3Hz
35,3Hz
35,6Hz
29,2Hz
29,9Hz
21,3Hz
21,7Hz
Magnet Suspenstructure sion
1150 gr Butil
1150 gr Butil
1700 gr Butil
1700 gr Butil
1980 gr Butil
1980 gr Butil
2300 gr Butil
2300 gr Butil
Cone
Response
Depth
Enclosure
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
Polypro-Carbon
41-150Hz
42-150Hz
35-150Hz
35-150Hz
29-150Hz
29-150Hz
21-150Hz
21-150Hz
12,6cm
12,6cm
15,6cm
15,6cm
16,9cm
16,9cm
19,2cm
19,2cm
Sealed-vented
Sealed-vented
Sealed-vented
Sealed-vented
Sealed-vented
Sealed-vented
Sealed-vented
Sealed-vented
T5510a
T5510d
T5512a
T5512d
T5510x2a
T5510x2d
T5512x2a
T5512x2d
T5510x3a
T5510x3d
25 cm
25 cm
30 cm
30 cm
2x25 cm
2x25 cm
2x30 cm
2x30 cm
3x25 cm
3x25 cm
Impedance
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
Max
Power
600W
600W
600W
600W
1200W
1200W
1200W
1200W
1800W
1800W
RMS
Enclosure
Power
300W
SLH*
300W
SLH*
300W
SLH*
300W
SLH*
600W
SLH*
600W
SLH*
600W
SLH*
600W
SLH*
900W
SLH*
900W
SLH*
* SledgeHammer
Stop talking subwoofers, start talking SuperWoofers! Bass gets serious...
A super strong MTX designed Die Cast Aluminium basket that screams it’s LOUD!
A 17mm Linear Cone Excursion one way
that means 34mm Total Linear Excursion.
Now we start moving air (mean making
bass). At this Bass level it is important that all subwoofer technologies are used as well as the spider with interlaced tinsel leads,
with 34mm Excursion broken
or ratteling leads are Not our
friends!
These superwoofers wear the
MTX AUDIO logo with pride!
The T7500 SledgeHammer enclosures are large slot ported
enclosures that take advantage of all the high quality
features of these superwoofers.
Only to deliver Bone Rattelin’
tight BASS!
Enter the world of MTX SuperWoofers! Only for the brave!
FEATURES
ALDS Technology
✔
SPV Technology
✔
CET Technology
✔
Butyl Suspension
✔
Polypro/Carbon cone
✔
Cone in 1 piece
✔
Sealed Compatible
✔
Vented Compatible
✔
Stitched Cone/suspension ✔
MTX basket
✔
Aluminium basket
✔
StreetWires connectors
X-max (1 way)
17mm
Power handling
9/10
Size
Size
T7510-04
T7510-44
T7512-04
T7512-44
T7515-04
T7515-04
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
Impedance
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
www.mitekeurope.com - www.mtx.com
Max
Power
800W
800W
800W
800W
800W
800W
RMS
Power
400W
400W
400W
400W
400W
400W
Sensitivity
88,5dB
90,6dB
89,4dB
92,1dB
91,9dB
95,0dB
Xmax
Fs
Magnet
17mm
17mm
17mm
17mm
17mm
17mm
47,0Hz
46,5Hz
45,2Hz
40,3Hz
28,6Hz
31,3Hz
2650 gr
2650 gr
2650 gr
2650 gr
3690 gr
3690 gr
Cooling SuspenCone
Response Depth
Enclosure
system
sion
SPV
CET
Polypro-Carbon 47-150Hz 17,0cm Sealed-vented
SPV
CET
Polypro-Carbon 46-150Hz 17,0cm Sealed-vented
SPV
CET
Polypro-Carbon 45-150Hz 18,3cm Sealed-vented
SPV
CET
Polypro-Carbon 40-150Hz 18,3cm Sealed-vented
SPV
CET
Polypro-Carbon 28-150Hz 20,7cm Sealed-vented
SPV
CET
Polypro-Carbon 31-150Hz 20,7cm Sealed-vented
T7510a
T7512a
T7510x2a
T7510x2d
T7512x2a
T7512x2d
T7510x3a
T7510x3d
25 cm
30 cm
2x25cm
2x25cm
2x30 cm
2x30 cm
3x25cm
3x25cm
Impedance
4Ω
4Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
Max
Power
800W
800W
1600W
1600W
1600W
1600W
2400W
2400W
RMS
Enclosure
Power
400W
SLH*
400W
SLH*
800W
SLH*
800W
SLH*
800W
SLH*
800W
SLH*
1200W
SLH*
1200W
SLH*
* SledgeHammer
At the borderline of imagination.
The T8500 are pushing the actual limits of
a subwoofer. All is superlative. In term of
construction, it is high fashion. In term of
performances, they fear no one. Serious
Monsters! You can’t imagine how loud
they can play until you’ll hear them...
These SuperWoofers are using a new
MTX designed basket as strong as
a tank. No vibration or rattle. Just
high efficiency for sound performances.
The magnet structure is so large
that the 25cm cone seams smaller! Watch the table underneath,
nothing’s missing.
With no less than 22mm one
way, the X-max is again phenomenal (44mm peak to peak).
Wooffff.
The patented StreetWires connectors are very useful. They accept
4mm2 cable with hex screw. Easy
for all possible wiring options.
Our SuperWoofers ? A nightmare for
our competitors!
FEATURES
ALDS Technology
✔
SPV Technology
✔
CET Technology
✔
Butyl Suspension
✔
Polypro/Carbon cone
✔
Cone in 1 piece
✔
Sealed Compatible
✔
Vented Compatible
✔
Stitched Cone/suspension ✔
MTX basket
✔
Aluminium basket
✔
StreetWires connectors
✔
X-max (1 way)
22mm
Power handling
10/10
Size
Size
T8510-04
T8510-44
T8512-04
T8512-44
T8515-04
T8515-44
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
Impedance
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
MAX
Power
1000W
1000W
1000W
1000W
1200W
1200W
www.mitekeurope.com - www.mtx.com
RMS
Power
500W
500W
500W
500W
600W
600W
Sensitivity
dB
dB
89,8dB
92,3dB
92,0dB
93,5dB
Xmax
Fs
Magnet
22mm
22mm
22mm
22mm
22mm
22mm
Hz
Hz
36,3Hz
38,8Hz
35,4Hz
32,0Hz
4080 gr
4080 gr
4540 gr
4540 gr
5000 gr
5000 gr
Cooling
sytem
SPV
SPV
SPV
SPV
SPV
SPV
Suspension
CET
CET
CET
CET
CET
CET
Cone
Response
Depth
Enclosure
Polypro-Carbon -150Hz
Polypro-Carbon -150Hz
Polypro-Carbon 36-150Hz
Polypro-Carbon 38-150Hz
Polypro-Carbon 35-150Hz
Polypro-Carbon 32-150 Hz
18,5cm
18,5cm
19,7cm
19,7cm
22,7cm
22,7cm
Sealed-vented
Sealed-vented
Sealed-vented
Sealed-vented
Sealed-vented
Sealed-vented
T8510a
T8510d
T8512a
T8512d
T8515a
T8515d
T8510x2a
T8510x2d
T8512x2a
T8512x2d
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
2x25 cm
2x25 cm
2x30 cm
2x30 cm
Impedance
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
MAX Power
RMS Power
1000W
1000W
1000W
1000W
1200W
1200W
2000W
2000W
2000W
2000W
500W
500W
500W
500W
600W
600W
1000W
1000W
1000W
1000W
Enclosure
SLH*
SLH*
SLH*
SLH*
SLH*
SLH*
SLH*
SLH*
SLH*
SLH*
* SledgeHammer
A fine line between genius and insanity!
It is the most beautiful, the more powerful
(2000W), the heavier (28Kg). You need a
superlative dictionary to speak about it.
T9500 incorporates 30 years of know how
in subwoofer manufacturing, and all the
experience of a 32 engineer team.
The X-max reaches 26mm one way (52 total peak to peak); world record. Twice more
than on an standard sub. Seeing it is astonishing, hearing it is terrifying!
Le basket is close to the glorious RFL.
The StreetWires patented connectors are
even better than the T8500. You’re able to
connect four 10mm2 wires on each terminal.
The SledgeHammer are the best possible enclosure to take full advantage
of these SuperWoofers. We tested all
the possible configurations; T9500 deserve a SledgeHammer. If you don’t
need our boxes, the SLH* dimensions
are available.
The T9500 is the most excessive sub
under production. Our competitors hate
us !
FEATURES
ALDS Technology
✔
SPV Technology
✔
CET Technology
✔
Butyl Suspension
✔
Polypro/Carbon cone
✔
Cone in 1 piece
✔
Sealed Compatible
✔
Vented Compatible
✔
Stitched Cone/suspension ✔
MTX basket
✔
Aluminium basket
✔
StreetWires connectors
✔
X-max (1 way)
26mm
Power handling
12/10
Size
T9510-04
T9510-44
T9512-04
T9512-44
T9515-04
T9515-44
Size
Impedance
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
4Ω
2x4Ω
4Ω
2x4Ω
4Ω
2x4Ω
MAX
Power
1500W
1500W
2000W
2000W
2000W
2000W
RMS
Power
750W
750W
1000W
1000W
1000W
1000W
www.mitekeurope.com - www.mtx.com
Sensitivity Xmax
88,9dB
87,5dB
87,4dB
91,0dB
90,4dB
93,8dB
26mm
26mm
26mm
26mm
26mm
26mm
Fs
Magnet
39,4Hz
41,1Hz
34,3Hz
36,4Hz
30,6Hz
31,9Hz
5550 gr
5550 gr
7400 gr
7400 gr
7400 gr
7400 gr
Cooling
system
SPV
SPV
SPV
SPV
SPV
SPV
SuspenResponse
Cone
Enclosure
sion
CET
39-150Hz Polypro/Carbon Sealed-vented
CET
41-150Hz Polypro/Carbon Sealed-vented
CET
34-150Hz Polypro/Carbon Sealed-vented
CET
36-150Hz Polypro/Carbon Sealed-vented
CET
30-150Hz Polypro/Carbon Sealed-vented
CET
31-150Hz Polypro/Carbon Sealed-vented
T9510a
T9510d
T9512a
T9512d
T9515a
T9515d
T9510x2d
T9512x2d
T9515x2d
25 cm
25 cm
30 cm
30 cm
38 cm
38 cm
2x25 cm
2x30 cm
2x38 cm
Impedance
4Ω
2Ω
4Ω
2Ω
4Ω
2Ω
2Ω
2Ω
2Ω
MAX
Power
1500W
1500W
2000W
2000W
2000W
2000W
3000W
4000W
4000W
RMS
Power
750W
750W
1000W
1000W
1000W
1000W
1500W
2000W
2000W
SensiResponse Enclosure
tivity
85,9dB 28-150Hz
SLH*
87,7dB 27-150Hz
SLH*
87,3dB 28-150Hz
SLH*
91,0dB 27-150Hz
SLH*
90,6dB 30-150Hz
SLH*
93,8dB 32-150Hz
SLH*
90,9dB 28-150Hz
SLH*
94,2dB 27-150Hz
SLH*
96,9dB 32-150Hz
SLH*
* SledgeHammer
David Lorion (France)
SS1-2 : 157,5dB (10/03)
1 Record in 2003
Eric Cottin AGH (France)
SS3-4 : 163,6dB (3/03)
2 Records in 2003
Electrobazar Mostoles (Spain)
IASCA competitors
Spanish Show car
Bart Car Audio Leuven
(Belgium)
SS1-2 : 158,1dB
2003 Benelux Vice Champion
MTX Thunder Force
Team Russia EXT3-4
Multiple Recors
holder
NicoVero
ProStyling (France)
StreetB : 153,0dB (11/03)
7 Records in 2003
Maurits van Aken
(Netherland)
SS5+ : 155,7dB
2003 Benelux Champion
Jessy Lancon (France)
SS5+ : 157,0dB (11/03)
2003 French Champion
Nicolas Humblot (France)
SSNW1-2 : 155,0dB (11/03)
2003 French Champion
European Vice Champion
Sandro & Fabien
ProStyling (France)
EXT1 : 162,7dB (11/03)
2003 French Champion
European Vice Champion
FrenchThunderForce team
MTX Thunder Force
Team Russia
EXT2 : 170,9dB
2003 Russia Champion
www.mitekeurope.com - www.mtx.com
Car Hifi (Belgium)
SSNW1-2 : 155,1dB
2003 Belgium Champion
John Struyer
Rien Overkamp
ASC Auto Styling Centrum
(Netherland)
SS3-4 : 161,3dB
2003 Benelux Champion