The Continuum of Critical Care

Transcription

The Continuum of Critical Care
The Continuum of Critical Care
This catalog provides a comprehensive overview of our critical care portfolio. The portfolio consists of
tools for monitoring patients of varying clinical complexity. Each product and system employs advanced
technologies to provide optimum insight and maximum efficiency within the clinical workflow.
Edwards also offers educational tools and resources to help advance the care and treatment of the
critically ill. Please visit www.Edwards.com/Education to access these complimentary tools, including
the Quick Guide to Cardiopulmonary Care.
Table of Contents
Advanced Minimally Invasive Hemodynamic Monitoring
FloTrac Sensor .........................................................................................................................1
PreSep Oximetry Catheters ...................................................................................................2
PediaSat Oximetry Catheters .................................................................................................3
Vigileo Monitor ......................................................................................................................4
Advanced Hemodynamic Monitoring
Swan-Ganz CCO, Oximetry and CEDV Catheters ..................................................................5
Swan-Ganz Oximetry Thermodilution Catheters..................................................................6
Swan-Ganz Pacing Catheters .................................................................................................7
Swan-Ganz Standard Thermodilution and VIP Catheters ....................................................9
Swan-Ganz No Latex Catheter and Introducer...................................................................10
Swan-Ganz Femoral Vein Insertion Catheters ....................................................................11
Swan-Ganz Pulmonary Angiography Catheters .................................................................12
Swan-Ganz Monitoring Catheters .......................................................................................13
CO-Set+ Closed Injectate Delivery System...........................................................................14
IntroFlex Percutaneous Sheath Introducers ........................................................................15
Vigilance II Monitor ..............................................................................................................17
Pressure Monitoring and Closed Blood Sampling Systems
TruWave Disposable Pressure Transducers and Kits ...........................................................18
VAMP Blood Sampling Systems ...........................................................................................20
TruWave Transducer/VAMP System Combination Kits .......................................................23
Pressure Monitoring Accessories .........................................................................................25
Pediatric Hemodynamic Monitoring
PediaSat Oximetry Catheters ...............................................................................................27
Pediatric Swan-Ganz Catheters............................................................................................28
Pediatric Pressure Monitoring and Closed Blood Sampling System ..................................28
Central Venous Access
Vantex Central Venous Catheters ........................................................................................30
Multi-Med Central Venous Catheters..................................................................................32
Customer Service and Ordering Information ..........................................................................34
Advanced Minimally Invasive
Hemodynamic Monitoring
Advanced Minimally Invasive Hemodynamic Monitoring
FloTrac Sensor
FloTrac sensor is a less-invasive hemodynamic monitoring device that provides key flow parameters
(CO, SV, SVV, SVR) from an existing arterial catheter using continuous automatic tone adjustments.
The complete system includes the Vigileo monitor that calculates and displays the key flow parameters.
The FloTrac sensor is accurate, easy to use and less invasive:
• Connects to existing arterial catheter.
• Requires no additional catheters, boluses or chemical indicators enabling rapid set up.
• Continuously monitors changes in the patient’s vascular tone (compliance and resistance).
• Validated against the clinical gold standard Swan-Ganz pulmonary artery catheter1.
• Compatible with Vigileo monitor.
Model
Description
MHD6
FloTrac sensor with 60” (152 cm) pressure line
MHD6AZ
FloTrac sensor with 60” (152 cm) pressure line and VAMP adult system
MHD8
FloTrac sensor with 84” (213 cm) pressure line
APCO9
FloTrac sensor connecting cable 9’ (274 cm)
PHYSIOTRAC
PhysioTrac laser leveler
1. A Manecke G, Auger W. “Cardiac Output Determination from the Arterial Pressure Wave: Clinical Testing of a Novel Algorithm That Does Not Require
Calibration.” Journal of Cardiothoracic and Vascular Anesthesia 2007; Vol 21 (1): 3-7
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
1
Advanced Minimally Invasive
Hemodynamic Monitoring
PreSep Oximetry Catheters
PreSep oximetry catheters are triple lumen central venous catheters with the added capability for continuously
monitoring central venous oxygen saturation (ScvO2). It is integral to Early Goal-Directed Therapy (EGDT)
for the management of sepsis. EGDT when used with the PreSep catheter yields significant reductions in
sepsis-related mortality1.
• Continuous ScvO2 monitoring to assess the balance of oxygen delivery and consumption.
• Available with antimicrobial protection using Oligon material.*
• Easy to insert using same insertion technique as that of central lines.
• Pressure monitoring and high flow rates.
• Compatible with Edwards oximetry monitors and optical module.
Proximal Lumen
Sheath
Distal Lumen
Optical Module
Connector
Suture Ring
Suture Wings
Medial Lumen
Model
Description
Integrated Antimicrobial
Protection*
Size (F)
# Lumens
Length (cm)
X3820HKCDC
PreSep oximetry catheter CDC kit**
N
8.5
3
20
X3820KCDC
PreSep oximetry catheter CDC kit
N
8.5
3
20
X3816HKCDC
PreSep oximetry catheter CDC kit**
N
8.5
3
16
X3816KCDC
PreSep oximetry catheter CDC kit
N
8.5
3
16
XA3820HKCDC
PreSep Oligon oximetry catheter CDC kit**
Y
8.5
3
20
XA3820KCDC
PreSep Oligon oximetry catheter CDC kit
Y
8.5
3
20
XA3816HKCDC
PreSep Oligon oximetry catheter CDC kit**
Y
8.5
3
16
XA3816KCDC
PreSep Oligon oximetry catheter CDC kit
Y
8.5
3
16
XA3816HKSAF
PreSep Oligon oximetry catheter safety kit**
Y
8.5
3
16
XA3816KSAF
PreSep Oligon oximetry catheter safety kit
Y
8.5
3
16
XA3820HKSAF
PreSep Oligon oximetry catheter safety kit**
Y
8.5
3
20
XA3820KSAF
PreSep Oligon oximetry catheter safety kit
Y
8.5
3
20
1. Rivers EP et al. Early Goal-Directed Therapy in the Treatment of Severe Sepsis and Septic Shock. New England Journal of Medicine 2001; 345 (19):1368-77
* PreSep Oligon oximetry catheters contain an integrated Oligon antimicrobial material. The activity of the antimicrobial material is localized at the catheter
surfaces and is not intended for treatment of systemic infections. In vitro testing demonstrated that the Oligon material provided broad-spectrum effectiveness
(≥ 3 log reduction from initial concentration within 48 hours) against the organisms tested: Staphylococcus aureus, Staphylococcus epidermidis, Klebsiella
pneumoniae, Enterococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, Acinetobacter calcoaceticus, Corynebacterium diphtheriae,
Enterobacter aerogenes, GMRSa, Pseudomonas aeruginosa, Candida glabrata and VRE (Enterococcus faecium).
** All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
All model numbers with “CDC” contain ChloraPrep retractable safety scalpel, needle locking devices and double sterile barrier with CSR wrap.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
2
Advanced Minimally Invasive
Hemodynamic Monitoring
PediaSat Oximetry Catheters
PediaSat oximetry catheters are pediatric central venous catheters with the added capability for
continuously monitoring central venous oxygen saturation (ScvO2).
• Continuously monitors ScvO2 to assess the balance of oxygen delivery and consumption.
• Sized for pediatrics.
• Easy to insert using same insertion technique as that of central lines.
• Offers high flow rates and convenient administration of fluids.
• Compatible with Edwards optical module and Edwards monitors including:
Vigileo, Vigilance II and Explorer monitors and SAT-2 device.
PediaSat Double Lumen Catheters
Model
Description
Size (F)
# Lumens
Length (cm)
XT245HK
PediaSat oximetry catheter kit*
4.5
2
5
XT245K
PediaSat oximetry catheter kit
4.5
2
5
XT248HK
PediaSat oximetry catheter kit*
4.5
2
8
XT248K
PediaSat oximetry catheter kit
4.5
2
8
Size (F)
Unit of Measure
Length (cm)
5.5
3
8
PediaSat Triple Lumen Catheters
Model
Description
XT358HK
PediaSat oximetry catheter kit*
XT358K
PediaSat oximetry catheter kit
5.5
3
8
XT3515HK
PediaSat oximetry catheter kit*
5.5
3
15
XT3515K
PediaSat oximetry catheter kit
5.5
3
15
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
3
Advanced Minimally Invasive
Hemodynamic Monitoring
Vigileo Monitor
Vigileo monitor is a single monitor solution for fluid optimization and tissue oxygenation. It allows for
the continuous monitoring of essential hemodynamic information, providing rapid insight on a minimally
invasive, easy-to-use platform.
The Vigileo monitor works with:
• The FloTrac sensor to measure and display key flow parameters (CO, SV, SVV, SVR).
• The PreSep catheter to provide central venous oxygen saturation (ScvO2).
TM
74
CO
ScvO2
ScvO2
12
100
6
50
0
0
?
Vigileo
Vi
gileo
TM
Model
Description
MHM1
Vigileo monitor (110 V)
MHM1E
Vigileo monitor (220 V)
MHAPLMNT
Vigileo monitor pole mount kit
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
4
Advanced Hemodynamic Monitoring
Swan-Ganz CCO Catheters
Swan-Ganz continuous cardiac output, SvO2 and CEDV catheters are to be used with the Vigilance II monitor
to properly display the specified parameters. Swan-Ganz CCO catheters allow for continuous calculation
of cardiac output.
Thermistor
@ 4 cm
Thermistor Connector
Thermal Filament
Balloon Inflation Valve
Balloon
Thermal Filament
Connector
PA Distal
Lumen
VIP Port @ 30 cm
Proximal Injectate
Lumen Hub
Optical Module
Connector
Proximal Injectate
Port @ 26 cm
VIP Lumen Hub
Model
Description
Size (F)
Unit of Measure
Advanced
Hemodynamic Monitoring
PA Distal Lumen Hub
Length (cm)
139F75
Continuous cardiac output (CCO) VIP catheter
7.5
CS (5)
110
139HF75P
Continuous cardiac output (CCO) VIP catheter*
7.5
CS (5)
110
Swan-Ganz CCOmbo Catheters
Swan-Ganz CCOmbo catheters are the abbreviated name for Swan-Ganz CCO/SvO2 thermodilution catheters,
which are designed to continuously monitor both cardiac output and mixed venous oxygen saturation (SvO2).
Model
Description
Size (F)
Unit of Measure
Length (cm)
744F75
Continuous cardiac output catheter with SvO2
7.5
EA
110
744HF75
Continuous cardiac output catheter with SvO2*
7.5
EA
110
746F8
Continuous cardiac output VIP catheter with SvO2
8
EA
110
746HF8
Continuous cardiac output VIP catheter with SvO2*
8
EA
110
Swan-Ganz Combo V Catheters
Swan-Ganz CCOmbo V catheters are designed to enable continuous monitoring of hemodynamic pressures,
continuous cardiac output, mixed venous oxygen saturation (SvO2), and continuous end diastolic volume (EDV).
Model
Description
Size (F)
Unit of Measure
Length (cm)
774F75
Continuous cardiac output catheter with SvO2 and EDV
7.5
EA
110
774HF75
Continuous cardiac output catheter with SvO2 and EDV*
7.5
EA
110
777F8
Continuous cardiac output VIP catheter with SvO2 and EDV
8
EA
110
777HF8
Continuous cardiac output VIP catheter with SvO2 and EDV*
8
EA
110
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
5
Swan-Ganz Oximetry Thermodilution Catheters
Swan-Ganz oximetry thermodilution catheters continuously monitor mixed venous oxygen saturation.
• Swan-Ganz oximetry thermodilution catheters enable monitoring of hemodynamic pressures,
cardiac output, and continuous mixed venous oxygen saturation.
• Swan-Ganz VIP oximetry thermodilution catheters provide an additional (VIP) lumen that
allows for continuous infusion.
• Swan-Ganz Paceport oximetry thermodilution catheters are intended for use in patients who
require hemodynamic monitoring when temporary transvenous pacing is anticipated.
Thermistor
Thermistor Connector
Balloon Inflation Valve
Optical Module
Connector
Balloon
Advanced
Hemodynamic Monitoring
Distal Lumen
RV Port @ 19 cm
Distal Lumen
Hub
RV Paceport
Lumen Hub
(Pacing/Infusion)
Model
Proximal Injectate
Port @ 30 cm
Proximal Injectate
Lumen Hub
Description
Size (F)
Unit of Measure
Length (cm)
110
741F75
Oximetry thermodilution catheter
7.5
EA
741HF75
Oximetry thermodilution catheter*
7.5
EA
110
782HF75
VIP oximetry thermodilution catheter*
7.5
EA
110
780HF75
Paceport oximetry thermodilution catheter*
7.5
EA
110
631HF55
Pediatric oximetry thermodilution catheter*
5.5
EA
75
040F4
Small French oximetry catheter
4
EA
40
040HF4
Small French oximetry catheter*
4
EA
40
015F4
Small French oximetry catheter
4
EA
25
015HF4
Small French oximetry catheter*
4
EA
25
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
6
Swan-Ganz Thermodilution Pacing Catheters
Swan-Ganz thermodilution pacing catheters are indicated for atrial, ventricular, or A-V sequential pacing.
• Thermodilution pacing catheters contain three atrial and two ventricular electrodes for atrial
and ventricular pacing and atrioventricular (A-V) sequential pacing.
Model
Description
D200F7
Pacing-TD catheter
Size (F)
Unit of Measure
Length (cm)
7
EA
110
D200HF7
Pacing-TD catheter*
7
EA
110
D205HF7
Pacing-TD catheter, for smaller hearts*
7
EA
110
Swan-Ganz Paceport Catheters and Chandler Probes
Advanced
Hemodynamic Monitoring
Swan-Ganz Paceport catheters are intended for use in patients who require hemodynamic monitoring
when the need for temporary transvenous pacing is anticipated.
Thermistor Connector
Balloon Inflation Valve
RV Paceport Lumen Hub
(Pacing/Infusion)
PA Distal
Lumen Hub
RV Port @ 19 cm
Proximal Injectate Hub
Proximal Injectate
Port @ 30 cm
Thermistor
Balloon
PA Distal Lumen
Paceport Catheter
Model
Description
Size (F)
Unit of Measure
Length (cm)
931F75
Paceport TD five lumen catheter
7.5
EA
110
931HF75
Paceport TD five lumen catheter*
7.5
EA
110
991HF8
A-V Paceport six lumen catheter*
8
EA
110
D98100H
Chandler transluminal V-pacing probe*
2.4
EA
135
D98500H
Flex-Tip transluminal A-pacing probe*
2.4
EA
135
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
7
Swan-Ganz Bipolar Pacing Catheters
Swan-Ganz bipolar pacing catheters are designed for temporary right ventricular endocardial pacing.
Distal Electrode Connector
Balloon
Proximal
Electrode
Connector
Distal Electrode
Proximal Electrode
Gate Valve
Model
Description
Size (F)
Unit of Measure
Length (cm)
D97120F5
SVC insertion, catheter only
5
EA
90
Advanced
Hemodynamic Monitoring
D97130F5
Femoral insertion, catheter only, “J-Tip”
5
EA
90
D97K12F5
SVC insertion, kit,
5
EA
90
D97K13F5
Femoral insertion, kit, “J-Tip”
5
EA
90
D97140HF5
VIP kit*
5
EA
100
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
8
Swan-Ganz Thermodilution Catheters
Swan-Ganz thermodilution catheters are designed for a variety of hemodynamic applications.
Model
Description
Size (F)
Unit of Measure
Length (cm)
132F5
Four lumen catheter
5
EA
75
096F6P
Four lumen catheter
6
CS (5)
110
131F7
Standard four lumen catheter
7
CS (5)
110
131HF7
Standard four lumen catheter*
7
CS (5)
110
Swan-Ganz VIP & VIP+ Catheters
Advanced
Hemodynamic Monitoring
The Swan-Ganz thermodilution catheters are designed for a variety of hemodynamic applications.
• The Swan-Ganz VIP catheters have an extra lumen in addition to the standard distal and injectate
lumens to provide direct access to the right atrium.
• The Swan-Ganz VIP+ catheters are equipped with two right atrium lumens.
PA Distal
Lumen Hub
Balloon Inflation
Valve (Gate Valve)
RV Infusion Lumen Hub
RA Infusion
Port @ 31 cm
RV Infusion
Port @ 19 cm
Thermistor
Connector
Proximal Injectate
Lumen Hub
RA Infusion Lumen
Thermistor
Proximal Injectate
Port @ 30 cm
Balloon
PA Distal
Lumen
Model
Description
Size (F)
Unit of Measure
Length (cm)
831F75
VIP five lumen catheter
7.5
CS (5)
110
831HF75
VIP five lumen catheter*
7.5
CS (5)
110
834HF75
VIP+ six lumen catheter*
7.5
CS (5)
110
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
9
Swan-Ganz No Latex Catheter and Introducer
• Catheter and introducer sheath are packaged together for maximum convenience.
• ControlCath thermodilution catheters are made from a proprietary polymer blend and offer improved
torque control and maneuverability over the standard Swan-Ganz thermodilution catheter.
• The Swan-Ganz ControlCath synthetic thermodilution catheter “C-Tip” allows for both femoral
or SVC approaches.
• K9FC146F7 contains catheter model C146F7 and introducer model I505BF9.
Thermistor Connector
Injectate Lumen Hub
Thermistor
Balloon Inflation Valve
Proximal Injectate
Proxi
Port
@ @ 30 cm
Port
Advanced
Hemodynamic Monitoring
Distal Lumen Hub
Balloon
“C-Tip”
Model
Description
K9FC146F7
No latex catheter and introducer
Distal Lumen Port
Size (F)
Unit of Measure
Length (cm)
7
EA
110
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
10
Swan-Ganz Femoral Vein Insertion Catheters
Swan-Ganz thermodilution catheters are designed for a variety of hemodynamic applications.
• Swan-Ganz Hi-Shore thermodilution catheters are slightly stiffer than the standard Swan-Ganz
catheter, and may be used when more torque control and maneuverability is needed.
• Swan-Ganz CardioCath thermodilution catheters are made of the same material as the Hi-Shore
catheters, but are even stiffer due to the stiffening rod in one lumen.
• Swan-Ganz ControlCath thermodilution catheters are made from a proprietary polymer blend
and offer improved torque control and maneuverability.
• The “S-Tip” configuration is designed specifically for femoral vein insertion.
• The “C-Tip” configuration allows for both femoral or SVC approaches.
Injectate Lumen Hub
Advanced
Hemodynamic Monitoring
Thermistor Connector
Balloon
Balloon Inflation Valve
Distal Lumen Port
Proximal Injectate
Port @ 30 cm
Distal Lumen Hub
Thermistor
“S-Tip”
Thermistor
Proximal Injectate
Port @ 30 cm
Balloon
“C-Tip”
Model
Distal Lumen Port
Description
Size (F)
Unit of Measure
Length (cm)
141HF7
Hi-Shore catheter*
7
CS (5)
110
141F7
Hi-Shore catheter
7
CS (5)
110
151F7
“S-Tip” catheter
7
EA
110
151HF7
“S-Tip” catheter*
7
EA
110
143HTF7
CardioCath, Hi-Shore catheter*
7
EA
110
143TF7
CardioCath, Hi-Shore catheter
7
EA
110
C144F7
ControlCath catheter, polymer blend, “C-Tip”
7
EA
110
C144HF7
ControlCath catheter, polymer blend, “C-Tip”*
7
EA
110
C145HF6
ControlCath catheter, polymer blend, “C-Tip”*
6
EA
110
S144F7
ControlCath catheter, polymer blend, “S-Tip”
7
EA
110
S144HF7
ControlCath catheter, polymer blend, “S-Tip”*
7
EA
110
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
11
Swan-Ganz Pulmonary Angiography Catheters
Swan-Ganz pulmonary angiography catheters are indicated for the detection of emboli in the
pulmonary vasculature.
• The distal tip is closed-ended to optimize injection of contrast medium through the
multi-hole side exit ports, which minimizes the occurrence of arrhythmias, intramyocardial
staining, and catheter tip recoil.
Balloon Inflation Valve
Balloon
Proximal Injection Ports
Proximal Lumen Hub
Advanced
Hemodynamic Monitoring
Model
Description
191F7
Pulmonary angiography catheter
Size (F)
Unit of Measure
Length (cm)
7
EA
110
191HF7
Pulmonary angiography catheter*
7
EA
110
191F8
Pulmonary angiography catheter
8
EA
110
191HF8
Pulmonary angiography catheter*
8
EA
110
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
12
Swan-Ganz Monitoring Catheters
Swan-Ganz flow-directed monitoring catheters provide a rapid, simple, and effective method for
monitoring right heart pressures.
• In double lumen catheters, the lumen terminates at the distal tip of the catheter and is
used to monitor pulmonary artery and wedge pressures.
• Triple lumen monitoring catheters have the same capabilities as double lumen catheters
with the additional (proximal) lumen for central venous pressure monitoring.
Balloon Inflation Valve
Balloon
PA Distal Lumen Port
Distal Lumen
Hub
Proximal Lumen Port
Advanced
Hemodynamic Monitoring
Proximal Lumen Hub
Triple Lumen Monitoring Catheter
Model
Description
Size (F)
Unit of Measure
Length (cm)
110F5
123F6P
Double lumen catheter
5
CS (5)
110
Double lumen catheter
6
CS (5)
110
T123F6
Double lumen catheter, “T-Tip”
6
CS (5)
110
111F7P
Double lumen catheter
7
CS (5)
110
S111F7
Double lumen catheter, “S-Tip” bend
7
EA
110
T111F7
Double lumen Hi-Shore catheter, “T-Tip”
7
CS (5)
110
114F7P
Triple lumen catheter, 30 cm exit proximal lumen
7
CS (5)
110
115F7P
Triple lumen catheter, 20 cm exit proximal lumen
7
CS (5)
110
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
13
CO-Set+ Closed Injectate Delivery System
The CO-Set+ closed injectate delivery system works effectively with room temperature or cold injectate.
• Provides simple and convenient delivery of injectate for the measurement of cardiac
output by thermodilution.
• Includes a 10 cc syringe with integrated contamination shield.
Cooling Container
Advanced
Hemodynamic Monitoring
10 cc Syringe
Model
Description
Unit of Measure
93600
Cold injectate system
CS (10)
93610
Room temperature injectate system
CS (10)
93611
Room temperature injectate system with 2 bonded stopcocks
CS (8)
CO-Set+ System Component Parts
Model
Description
93505
Flow-through injectate housing
Unit of Measure
CS (8)
93520
Cooling containers
CS (6)
93521
Cooling container bracket for IV pole
EA
93522
CO-Set+ system inline injectate temperature probe for Edwards monitors
EA
93650
CO-Set+ system syringe, 10 cc
CS (5)
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
14
IntroFlex Percutaneous Sheath Introducers
IntroFlex introducers are the perfect companion for your Swan-Ganz catheters.
• Sheath material resists kinking and sheath collapse, while easing insertion.
• Improved taper for easier insertion.
• Adjustable locking device helps secure catheter in place.
• Available with or without AMC Thromboshield* coating, an antimicrobial† heparin coating.
Tissue
Sheath
Introducer Valve Housing
Catheter
Touhy-Borst Proximal Adapter
Strain Relief
Distal Locking Adapter
Contamination Shield
Advanced
Hemodynamic Monitoring
Sideport
5 French Introducers
Model
Description
I500F5C
Kit with 5F sheath, detachable automatic
Unit of Measure
Useable Length (cm)
CS (10)
10
CS (10)
10
Unit of Measure
Useable Length (cm)
CS (10)
10
CS (10)
10
Unit of Measure
Useable Length (cm)
CS (10)
10
CS (10)
10
valve and ChloraPrep preoperative skin
preparation sites
I550BF5
Kit with 5F sheath and bonded adjustable valve
6 French Introducers
Model
Description
I500F6C
Kit with 6F sheath, detachable automatic
valve and ChloraPrep preoperative skin
preparation sites
I550BF6
Kit with 6F sheath and bonded adjustable valve
7 French Introducers
Model
I500F7C
Description
Kit with 7F sheath, detachable automatic
valve and ChloraPrep preoperative skin
preparation sites
I550BF7
Kit with 7F sheath and bonded adjustable valve
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
15
8 French Introducers
Model
Description
I550BF8
Kit with 8F sheath and bonded adjustable valve
Unit of Measure
Useable Length (cm)
CS (10)
10
Unit of Measure
Useable Length (cm)
CS (10)
10
8.5 French Introducers
Model
I500F85C
Description
Kit with 8.5F sheath, detachable automatic
valve and ChloraPrep preoperative skin
preparation sites
I500BF85
Kit with 8.5F sheath, bonded automatic valve
CS (10)
10
I500BF85C
Kit with 8.5F sheath, bonded automatic valve
CS (10)
10
CS (10)
10
CS (10)
10
CS (10)
10
Unit of Measure
Useable Length (cm)
CS (10)
10
CS (10)
10
CS (10)
10
and ChloraPrep preoperative skin preparation sites
Comprehensive Hemodynamic
Monitoring
SI500BF85I
Safety kit with ChloraPrep preoperative skin
preparation, SafetyGlide needles, Futura safety
scalpel and CLC 2000 connector
I502BF85HC
Kit with 8.5F heparin coated sheath, bonded
automatic valve and ChloraPrep preoperative skin
preparation sites*
I551BF85H
Kit with 8.5F heparin coated sheath and bonded
adjustable valve*
9 French Introducers: High-Flow Sidearm
Model
Description
I505BF9HC
High-flow kit with 9F heparin coated sheath,
bonded automatic valve and ChloraPrep
preoperative skin preparation sites*
I555BF9H
High-flow kit with 9F heparin coated sheath,
bonded adjustable valve*
SI5AB9FKI
Safety kit with ChloraPrep preoperative skin
preparation, SafetyGlide needles, Futura safety
scalpel and CLC 2000 connector
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
16
Vigilance II Monitor
The Vigilance II monitor offers a complete picture of hemodynamic performance.
• CO, SvO2, EDV, RVEF, SVR and SV parameters are continuously displayed on a single,
easy-to-use unit.
• Calculation and cross-correlation of hemodynamic and oxygenation parameters provide a rapid,
comprehensive diagnosis.
• Pseudorandom signal processing.
• STAT mode provides up-to-the-minute hemodynamic assessment.
• Trended indexed or non-indexed parameters are available at the touch of a button.
• Service and extended warranties are available for the Vigilance II monitor. For more information
Comprehensive Hemodynamic
Monitoring
please speak with an Edwards sales representative or call 800-822-9837.
TM
min
Model
Description
VIG2
Continuous cardiac output computer system with SvO2 and CEDV capabilities
Vigilance II Monitor Accessories
Model
Description
Unit of Measure
70CC2
Vigilance monitor patient CCO cable
EA
93522
In-line injectate temperature probe
EA
COM2PC
Power cord
EA
OM2
Oximetry optical module
EA
9850A
Bath temperature probe
EA
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
17
Pressure Monitoring and Closed Blood Sampling Systems
TruWave Disposable Pressure Transducers
The pressure monitoring kit with the TruWave disposable pressure transducer is a sterile, single-use
kit that monitors blood pressure when attached to pressure monitoring catheters.
• Design features a straight, flow-through design across the pressure sensor.
• Available with or without the integral flush device.
• Designed with a snap-tab device for square-wave testing.
Snap-Tab Device
Transducer Vent Port
To Patient
To
IV Set
Test Port
To Monitor
TruWave Disposable Pressure Transducers
Model
Description
Unit of Measure
PX600
TruWave disposable pressure transducer, one bonded 1-way shutoff stopcock
CS (20)
PX600F
TruWave disposable pressure transducer, 3 ml/hr flush device, vent stopcock
CS (20)
PX600F30
TruWave disposable pressure transducer, 30 ml/hr flush device, vent stopcock
CS (20)
PX600I
TruWave disposable pressure transducer, bonded 1-way shutoff stopcock,
CS (20)
bonded 3-way vent stopcock
PX601
TruWave disposable pressure transducer, 12” cable
CS (20)
PX604
TruWave disposable pressure transducer, 4’ cable
CS (20)
PX604I
TruWave disposable pressure transducer, 4’ cable, bonded
CS (10)
1-way shutoff stopcock, bonded 3-way vent stopcock
Pressure Monitoring and
Closed Blood Sampling Systems
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
18
TruWave Disposable Pressure Transducer Kits
Model
PX212
Description
Model PX600F disposable pressure transducer, flush device, IV set
Unit of Measure
CS (10)
(macrodrip), 12” pressure tubing, one 3-way stopcock
PX260
Model PX600F disposable pressure transducer, flush device,
CS (10)
IV set (macrodrip), 48” and 12” pressure tubing, two 3-way stopcocks
PX272
Model PX600F disposable pressure transducer, flush device, IV set
CS (10)
(macrodrip), 60” and 12” pressure tubing, two 3-way stopcocks
PX284
Model PX600F disposable pressure transducer, flush device, IV set
CS (10)
(macrodrip), 72” and 12” pressure tubing, two 3-way stopcocks
PX1X2
Model PX600F disposable pressure transducer, two flush devices,
CS (10)
bifurcated IV set (macrodrip), two sets of 48” and 12” pressure tubing,
three 3-way stopcocks, one 4-way stopcock
PX2X2
Model PX600F disposable pressure transducer, two flush devices,
CS (10)
bifurcated IV set (macrodrip), two sets of 48” and 12” pressure
tubing, four 3-way stopcocks
PX2X3
Two model PX600F disposable pressure transducers, three flush
CS (10)
devices, trifurcated IV set (macrodrip), three sets of 48” and 12”
pressure tubing, five 3-way stopcocks, one 4-way stopcock
PX3X3
Three model PX600F disposable pressure transducers, three flush devices,
CS (10)
trifurcated IV set (macrodrip), three sets of 48” and 12” pressure tubing,
six 3-way stopcocks
PX3X3272
Three model PX600F disposable pressure transducers, three flush devices,
CS (10)
trifurcated IV set (macrodrip), three sets of 60” and 12” pressure tubing,
six 3-way stopcocks
TruWave Disposable Pressure Transducer Pediatric Neonatal Kits
Model
Description
PX12N
TruWave disposable pressure transducer, 30 cc flush device,
PX24N
TruWave disposable pressure transducer, 30 cc flush device,
Unit of Measure
CS (10)
Pressure Monitoring and
Closed Blood Sampling Systems
12” pediatric tubing, two 3-way stopcocks
CS (10)
24” pediatric tubing, two 3-way stopcocks
PX36N
TruWave disposable pressure transducer, 30 cc flush device,
CS (10)
36” pediatric tubing, two 3-way stopcocks
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
19
VAMP Closed Blood Sampling System
Venous Arterial blood Management Protection system is a needleless closed blood sampling system.
• When attached to pressure monitoring lines, the VAMP system provides a safe and convenient
method for the withdrawal of blood samples.
• Designed for use with all disposable pressure transducers and for connection to central line
catheters and arterial catheters.
• Versatile design can be bracket mounted on an IV pole or used as an arm-mount depending
on the application.
• A needleless sampling port.
Proximal
(To Patient)
Reservoir
Sampling
Site
Shut Off Valve
Distal
VAMP System Kits
Model
Description
VMP106
6” sampling kit, sample site, reservoir and two shut-off valves (may
Unit of Measure
CS (20)
be used for venous applications without a flow controlling device)
48VMP120
20” sampling kit, sample site and arm reservoir
CS (20)
48VMP160
60” sampling kit, sample site and arm reservoir
CS (20)
48VMP172
72” sampling kit, sample site and arm reservoir
CS (20)
Pressure Monitoring and
Closed Blood Sampling Systems
48VMP184
84” sampling kit, sample site and arm reservoir
CS (20)
48VMP260
60” sampling kit, sample site and pole-mount reservoir
CS (20)
48VMP272
72” sampling kit, sample site and pole-mount reservoir
CS (20)
48VMP284
84” sampling kit, sample site and pole-mount reservoir
CS (20)
48AVMP
VAMP system anesthesia kit, 68” sampling kit with male/female connector
CS (20)
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
20
VAMP Plus System Kits
Venous Arterial blood Management Protection Plus system allows the withdrawal of blood samples from
pressure monitoring lines.
• Designed for use with disposable pressure transducers and for connection to central line catheters,
venous catheters, and arterial catheters where the system can be flushed clear after sampling.
• One-handed pole-mount provides a simple method of drawing the clearing volume.
• Blood sample sites incorporate familiar needleless technology for added safety.
Shut Off Valve
12 cc Reservoir
Dual Sampling Sites
Model
VP1
Description
VAMP Plus system reservoir with 60” patient tubing and one sample site
Unit of Measure
CS (10)
located 55” from the patient
VP2
VAMP Plus system reservoir with 60” patient tubing and two sample sites
CS (10)
Pressure Monitoring and
Closed Blood Sampling Systems
located 13” and 55” from the patient
VAMP System Accessories
Model
Description
Unit of Measure
VMP400
VAMP system needleless cannula
CS (200)
VMP503H
3 cc heparin coated ABG syringe with VAMP needleless cannula*
CS (50)
48VMP600
VAMP system blood transfer unit (BTU) for sample transfer to vacuum tubes
CS (50)
VMP700
VAMP system direct draw unit for direct line blood sampling
CS (50)
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
21
VAMP Jr. System Kits
The VAMP Jr. closed blood sampling system provides a safe and convenient method for withdrawing
blood samples.
• Designed for connection to umbilical, arterial, and central line catheters and for use with
disposable and reusable pressure transducers, if desired.
• The VAMP Jr. reservoir is used for drawing and retaining diluted blood (or clearing volume)
from an in-line sampling site.
2cc
1cc
Distal
Proximal
(To Patient)
Needle*Less
Sampling Site
Shut-Off
Valve
Reservoir
Needle*Less
Shut-Off
Access/Flush Site Valve
Model
Description
Unit of Measure
VMP306
2” proximal, 4” distal for neonatal application
CS (20)
VMP406
3” proximal, 3” distal for pediatric application
CS (20)
VMP426
10” proximal, 16” distal for pediatric application
CS (20)
VMP448
19” proximal, 29” distal for pediatric application
CS (20)
Pressure Monitoring and
Closed Blood Sampling Systems
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
22
TruWave Transducers/VAMP System Combination Kits
Model
PXVMP120
Description
20” VAMP system with arm-mount reservoir with
Unit of Measure
CS (10)
TruWave disposable pressure transducer
PXVMP160
60” VAMP system with arm-mount reservoir with
CS (10)
TruWave disposable pressure transducer
PXVMP172
72” VAMP system with arm-mount reservoir with
CS (10)
TruWave disposable pressure transducer
PXVMP184
84” VAMP system with arm-mount reservoir with
CS (10)
TruWave disposable pressure transducer
PXVMP260
60” VAMP system with arm-mount reservoir with
CS (10)
TruWave disposable pressure transducer
PXVMP272
72” VAMP system with arm-mount reservoir with
CS (10)
TruWave disposable pressure transducer
PXVMP284
84” VAMP system with arm-mount reservoir with
CS (10)
TruWave disposable pressure transducer
PXVMP2X21
60” VAMP system with arm-mount reservoir on the arterial line with two
CS (10)
TruWave disposable pressure transducers with two 3 ml/hr flush devices,
bifurcated IV set (macrodrip), one set of 48” and 12” pressure tubing,
three 3-way stopcocks
PXVMP2X22
60” VAMP system with pole-mount reservoir on the arterial line with two
CS (10)
TruWave disposable pressure transducers with two 3 ml/hr flush devices,
bifurcated IV set (macrodrip), one set of 48”and 12” pressure tubing,
three 3-way stopcocks
PXVMP2X31
60” VAMP system with arm-mount reservoir on the arterial line with two
CS (10)
TruWave disposable pressure transducers with two 3 ml/hr flush devices,
trifurcated IV set (macrodrip), pressure selection stopcocks, two sets of 48”
and 12” pressure tubing, five 3-way stopcocks
PXVMP3X31
60” VAMP system with arm-mount reservoir on the arterial line with three
CS (10)
TruWave disposable pressure transducers with three 3 ml/hr flush devices,
trifurcated IV set (macrodrip), two sets of 48” and 12” pressure tubing,
five 3-way stopcocks
72” VAMP system with pole-mount reservoir on the arterial line with three
CS (10)
Pressure Monitoring and
Closed Blood Sampling Systems
PXVMP3X32
TruWave disposable pressure transducers with three 3 ml/hr flush devices,
trifurcated IV set (macrodrip), two sets of 60” and 12” pressure tubing,
five 3-way stopcocks
PXAVMP
VAMP sampling kit with TruWave disposable pressure transducer,
CS (10)
68” total tubing, male connector
PXAVMP3
VAMP sampling kit with three TruWave disposable pressure transducers,
CS (10)
68” total tubing, male connector
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
23
TruWave Transducers/VAMP Plus System Combination Kits
Model
Description
PXVP2260
TruWave disposable pressure transducer/VAMP Plus system kit with 60”
Unit of Measure
CS (10)
patient tubing and two sample sites located 13” and 55” from the patient
PXVP2272
TruWave disposable pressure transducer/VAMP Plus system kit with 72”
CS (10)
patient tubing and two sample sites located 13” and 55” from the patient
PXVP2284
TruWave disposable pressure transducer/VAMP Plus system kit with 84”
CS (10)
patient tubing and two sample sites located 13” and 55” from the patient
PXVP23X3
TruWave disposable pressure transducer/VAMP Plus system kit with three
CS (10)
TruWave transducers, 60” patient tubing and two sample sites located 13”
and 55” from the patient
TruWave Transducers/VAMP Jr. System Combination Kits
Model
Description
VMP306PX
30 cc TruWave disposable pressure transducer, with 2” proximal, 4” distal
VMP406PX
3 cc TruWave disposable pressure transducer, with 3” proximal, 3” distal
VMP426PX
3 cc TruWave disposable pressure transducer, with 10” proximal, 16” distal
VMP448PX
3 cc TruWave disposable pressure transducer, with 29” proximal, 18” distal
Unit of Measure
CS (10)
VAMP Jr. system for neonatal application
CS (10)
VAMP Jr. system for pediatric application
CS (10)
VAMP Jr. system for pediatric application
CS (10)
VAMP Jr. system for pediatric application
Pressure Monitoring and
Closed Blood Sampling Systems
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
24
TruWave Disposable Pressure Transducer Accessories
Model
Description
Unit of Measure
DTH4
Backplate holder for disposable pressure transducers
CS (10)
DTSC
IV pole clamp for model DTH4 backplate holder
EA
DTSS
Arm strap for model PX-series disposable pressure transducer
CS (10)
AM300
Adhesive body mount for disposable pressure transducer
CS (100)
59PXCAL
TruCal pressure transducer simulator for TruWave disposable
EA
pressure transducers
PHYSIOTRAC
PhysioTrac laser leveler
EA
PXSIM
Pressure transducer simulator tester tubing set for TruWave
EA
disposable pressure transducer used in conjunction with 59PXCAL
PX1800
Reusable cable for use with TruWave disposable pressure transducers
EA
(monitor information must be specified when ordering)
TruWave Disposable Pressure Transducer Arterial Turnarounds
Model
Description
Unit of Measure
1WV06
6” pressure tubing, low volume, bonded to 1-way stopcock
CS (20)
K16906
6” pressure tubing, low volume, bonded to 3-way stopcock
CS (20)
K16912
12” pressure tubing, low volume, bonded to 3-way stopcock
CS (20)
TruWave Disposable Pressure Transducer Continuous Flush Devices
Model
Description
Unit of Measure
55UF100
Flush device, flow rate 3 ml/hr
CS (20)
55UF130
Flush device, flow rate 30 ml/hr
CS (20)
Model
Description
54IV12
Single line macrodrip IV set with 60” main line
54IV22
Bifurcated macrodrip IV set with 36” main line and 9” extension legs
CS (10)
IV32
Trifurcated macrodrip IV set with 36” main line and 9” extension legs
CS (20)
Pressure Monitoring and
Closed Blood Sampling Systems
TruWave Disposable Pressure Transducer IV Sets
Unit of Measure
CS (10)
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
25
TruWave Disposable Pressure Transducer Accessories
Model
Description
Unit of Measure
50P106
Male/female connectors, 6” long
CS (20)
50P112
Male/female connectors, 12” long
CS (20)
50P124
Male/female connectors, 24” long
CS (20)
50P136
Male/female connectors, 36” long
CS (20)
50P148
Male/female connectors, 48” long
CS (20)
50P160
Male/female connectors, 60” long
CS (20)
50P172
Male/female connectors, 72” long
CS (20)
50P184
Male/female connectors, 84” long
CS (20)
50P200R
Male/male luer lock adapter with rotating nut
CS (20)
50P206
Male/male connectors, 6” long
CS (20)
50P212
Male/male connectors, 12” long
CS (20)
50P224
Male/male connectors, 24” long
CS (20)
50P236
Male/male connectors, 36” long
CS (20)
50P248
Male/male connectors, 48” long
CS (20)
50P260
Male/male connectors, 60” long
CS (20)
50P272
Male/male connectors, 72” long
CS (20)
50P284
Male/male connectors, 84” long
CS (20)
TruWave Disposable Pressure Transducer Stopcocks and Caps
Model
Description
Unit of Measure
1WSC
One-way sterile stopcock
CS (50)
3WSC
Three-way sterile stopcock
CS (50)
4WSC
Four-way sterile stopcock
CS (50)
59L3WSC
Lipid resistant 3-way stopcock
CS (20)
59L4WSC
Lipid resistant 4-way stopcock
CS (20)
MNVC
Sterile, non-vented male cap
CS (50)
Pressure Monitoring and
Closed Blood Sampling Systems
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
26
Pediatric
Hemodynamic Monitoring
Pediatric Hemodynamic Monitoring
PediaSat Oximetry Catheters
PediaSat oximetry catheters are pediatric central venous catheters with the added capability for the
continuous monitoring of central venous oxygen saturation (ScvO2).
• Continuous ScvO2 monitoring to assess the balance of oxygen delivery and consumption.
• Sized for pediatrics.
• Easy to insert using same insertion technique as that of central lines.
• Offers high flow rates and convenient administration of fluids.
• Compatible with Edwards optical module and Edwards monitors including: Vigileo,
Vigilance II and Explorer monitors and SAT-2 device.
PediaSat Double Lumen Catheters
Model
Description
Size (F)
# Lumens
Length (cm)
XT245HK
PediaSat oximetry catheter kit*
4.5
2
5
XT245K
PediaSat oximetry catheter kit
4.5
2
5
XT248HK
PediaSat oximetry catheter kit*
4.5
2
8
XT248K
PediaSat oximetry catheter kit
4.5
2
8
Size (F)
Unit of Measure
Length (cm)
5.5
3
8
PediaSat Triple Lumen Catheters
Model
Description
XT358HK
PediaSat oximetry catheter kit*
XT358K
PediaSat oximetry catheter kit
5.5
3
8
XT3515HK
PediaSat oximetry catheter kit*
5.5
3
15
XT3515K
PediaSat oximetry catheter kit
5.5
3
15
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
27
Pediatric
Hemodynamic Monitoring
Swan-Ganz Pediatric Catheters
Swan-Ganz pediatric catheters serve as diagnostic tools for the physician to continuously monitor
mixed venous oxygen saturation.
• The Swan-Ganz pediatric catheters enable monitoring of hemodynamic pressures,
cardiac output, and continuous mixed venous oxygen staturation.
Thermistor
Thermistor Connector
Balloon Inflation Valve
Optical Module
Connector
Balloon
Distal Lumen
RV Port @ 19 cm
Distal Lumen
Hub
RV Paceport
Lumen Hub
(Pacing/Infusion)
Model
Description
040F4
040HF4
Proximal Injectate
Lumen Hub
Proximal Injectate
Port @ 30 cm
Size (F)
Useable Length (cm)
Small French oximetry catheter
4
40
Small French oximetry catheter*
4
40
015F4
Small French oximetry catheter
4
25
015HF4
Small French oximetry catheter*
4
25
TruWave Disposable Pressure Transducer Pediatric Neonatal Kits
The pressure monitoring kit with the TruWave disposable pressure transducer is a sterile, single-use kit
that monitors blood pressure when attached to pressure monitoring catheters.
Model
Description
PX12N
TruWave disposable pressure transducer, 30 cc flush device,
Unit of Measure
CS (10)
12” pediatric tubing, two 3-way stopcocks
PX24N
TruWave disposable pressure transducer, 30 cc flush device,
CS (10)
24” pediatric tubing, two 3-way stopcocks
PX36N
TruWave disposable pressure transducer, 30 cc flush device,
CS (10)
36” pediatric tubing, two 3-way stopcocks
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
28
Pediatric
Hemodynamic Monitoring
VAMP Jr. Closed Blood Sampling System
The VAMP Jr. closed blood sampling system provides a safe and convenient method for withdrawing
blood samples.
• Designed for connection to umbilical, arterial, and central line catheters and for use with
disposable and reusable pressure transducers, if desired.
• The VAMP Jr. reservoir is used for drawing and retaining diluted blood (or clearing volume)
from an in-line sampling site.
2cc
1cc
Distal
Proximal
(To Patient)
Needle*Less
Sampling Site
Model
Shut-Off
Valve
Reservoir
Needle*Less
Shut-Off
Access/Flush Site Valve
Description
Unit of Measure
VMP306
2” proximal, 4” distal for neonatal application
CS (20)
VMP406
3” proximal, 3” distal for pediatric application
CS (20)
VMP426
10” proximal, 16” distal for pediatric application
CS (20)
VMP448
19” proximal, 29” distal for pediatric application
CS (20)
TruWave Transducers/VAMP Jr. System Combination Kits
Model
Description
VMP306PX
30 cc TruWave disposable pressure transducer, with 2” proximal,
VMP406PX
3 cc TruWave disposable pressure transducer, with 3” proximal,
VMP426PX
3 cc TruWave disposable pressure transducer, with 10” proximal,
Unit of Measure
CS (10)
4” distal VAMP Jr. system for neonatal application
CS (10)
3” distal VAMP Jr. system for pediatric application
CS (10)
16” distal VAMP Jr. system for pediatric application
VMP448PX
3 cc TruWave disposable pressure transducer, with 19” proximal,
CS (10)
9” distal VAMP Jr. system for pediatric application
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
29
Central Venous Access
Vantex Central Venous Catheters
Vantex catheters with Oligon** material, are the first central venous catheters made of a biocompatible
and antimicrobial** material.
• The Vantex central venous catheters are the only central venous catheters extruded from
polyurethane, combined with the natural elements of silver, carbon and platinum.
• The Oligon material releases silver ions from the device surfaces, which kills colonizing bacteria.
Proximal Lumen
Sheath
Distal Lumen
Suture Ring
Suture Wings
Medial Lumen
Vantex Double Lumen Catheters – 7 French
Central Venous Access
Model
Description
A2716HKIC
Expanded kit with heparin, Interlink
Size (F)
Unit of Measure
Length (cm)
7
CS (5)
16
7
CS (5)
16
7
CS (5)
20
Size (F)
Unit of Measure
Length (cm)
8.5
CS (5)
16
8.5
CS (5)
20
8.5
CS (5)
20
injection sites and ChloraPrep preoperative
skin preparation*
SA2716HKI
Safety kit with heparin, ChloraPrep preoperative
skin preparation, SafetyGlide needles, Futura
safety scalpel and CLC 2000 connector*
A2720HKIC
Expanded kit with heparin, Interlink
injection sites and ChloraPrep preoperative
skin preparation*
Vantex Double Lumen Catheters – 8.5 French
Model
A2816HKIC
Description
Expanded kit with heparin, Interlink
injection sites and ChloraPrep preoperative
skin preparation*
A2820HKIC
Expanded kit with heparin, Interlink
injection sites and ChloraPrep preoperative
skin preparation*
SA2820HKI
Safety kit with heparin, ChloraPrep preoperative
skin preparation, SafetyGlide needles, Futura
safety scalpel and CLC 2000 connector*
Non-heparin kits also available.
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
** Vantex catheters contain an integrated Oligon antimicrobial material. The activity of the antimicrobial material is localized at the catheter surfaces and is not
intended for treatment of systemic infections. In vitro testing demonstrated that the Oligon material provided broad-spectrum effectiveness (≥ 3 log reduction from
initial concentration within 48 hours) against the organisms tested: Staphylococcus aureus, Staphylococcus epidermidis, Klebsiella pneumoniae, Enterococcus faecalis,
Candida albicans, Escherichia coli, Serratia marcescens, Acinetobacter calcoaceticus, Corynebacterium diphtheriae, Enterobacter aerogenes, GMRSa, Pseudomonas
aeruginosa, Candida glabrata and VRE (Enterococcus faecium).
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
30
Vantex Triple Lumen Catheters – 7 French
Model
Description
A3716HKIC
Expanded kit with heparin, Interlink
Size (F)
Unit of Measure
Length (cm)
7
CS (5)
16
7
CS (5)
20
7
CS (5)
16/20
Size (F)
Unit of Measure
Length (cm)
8.5
CS (5)
16
8.5
CS (5)
20
Size (F)
Unit of Measure
Length (cm)
7
CS (4)
16/20
injection sites and ChloraPrep preoperative
skin preparation*
A3720HKIC
Expanded kit with heparin, Interlink
injection sites and ChloraPrep preoperative
skin preparation*
SA3716HKI /
Safety kit with Point-Lok needle protection
SA3720HKI
device, ChloraPrep preoperative skin preparation,
SafetyGlide needles, Futura safety scalpel and
CLC 2000 connector*
Model
Description
A4816HKIC
Expanded kit with heparin, Interlink
Central Venous Access
Vantex Quad Lumen Catheters – 8.5 French
injection sites and ChloraPrep preoperative
skin preparation*
A4820HKIC
Expanded kit with heparin, Interlink
injection sites and ChloraPrep preoperative
skin preparation*
Vantex Safety Kit PLUS
Model
Description
SSA3716HKI/
Safety kit with maximal barrier
SSA3720HKI
precautions including full body drape,
cap, mask, gown and insertion checklist*
Non-heparin kits also available.
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
31
Multi-Med Central Venous Catheters
These versatile catheters are designed for a variety of uses.
• Multiple uses include fluid administration, blood sampling and pressure monitoring.
• Multi-Med catheter kits contain a guidewire insertion device.
• Available with needleless injection sites - Interlink or CLC 2000 connector.
• Also available with or without AMC Thromboshield* coating, an antimicrobial† heparin coating.
Proximal Lumen
Sheath
Distal Lumen
Suture Ring
Medial Lumen
Suture Wings
Central Venous Access
Multi-Med Single Lumen Catheters
Model
Description
Size (Gauge/F)
Unit of Measure
Length (cm)
M12013K
M11620HKIC
20 ga x 5 1/8” (13 cm) expanded kit
3F/20g
CS (5)
13
16 ga x 8” (20 cm) expanded kit with
5F/16g
CS (5)
20
6F/14g
CS (5)
20
Size (F)
Unit of Measure
Length (cm)
7
CS (5)
16
7
CS (5)
20
heparin, Interlink injection sites and
ChloraPrep preoperative skin preparation*
M11420HKIC
14 ga x 8” (20 cm) expanded kit with
heparin, Interlink injection sites and
ChloraPrep preoperative skin preparation*
Multi-Med Double Lumen Catheters – 7 French
Model
Description
M2716HKIC
Expanded kit with heparin, Interlink
injection sites and ChloraPrep preoperative
skin preparation*
M2720HKIC
Expanded kit with heparin, Interlink
injection sites and ChloraPrep preoperative
skin preparation*
Non-heparin kits also available.
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
32
Multi-Med Double Lumen Catheters – 8.5 French
Model
Description
M2816HKIC
Expanded kit with heparin, Interlink injection
Size (F)
Unit of Measure
Length (cm)
8.5
CS (5)
16
8.5
CS (5)
20
Size (F)
Unit of Measure
Length (cm)
7
CS (5)
16
7
CS (5)
16
7
CS (5)
20
7
CS (5)
20
Size (F)
Unit of Measure
Length (cm)
8.5
CS (5)
16
8.5
CS (5)
20
sites and ChloraPrep preoperative skin preparation*
M2820HKIC
Expanded kit with heparin, Interlink injection
sites and ChloraPrep preoperative skin preparation*
Multi-Med Triple Lumen Catheters – 7 French
Model
Description
M3716HKIC
Expanded kit with heparin, Interlink injection
SM3716HKI
Safety kit with ChloraPrep preoperative skin
sites and ChloraPrep preoperative skin preparation*
preparation, SafetyGlide needles, Futura safety
M3720HKIC
Expanded kit with heparin, Interlink injection
Central Venous Access
scalpel and CLC 2000 connector*
and ChloraPrep preoperative skin preparation sites*
SM3720HKI
Safety kit with ChloraPrep preoperative skin
preparation, SafetyGlide needles, Futura safety
scalpel and CLC 2000 connector*
Multi-Med Quad Lumen Catheters
Model
Description
M4816HKIC
Expanded kit with heparin, Interlink injection
sites and ChloraPrep preoperative skin preparation*
M4820HKIC
Expanded kit with heparin, Interlink injection
sites and ChloraPrep preoperative skin preparation*
* All model numbers with an “H” contain AMC THROMBOSHIELD coating (an antimicrobial† heparin coating). Antimicrobial activity associated with
AMC THROMBOSHIELD coating has been demonstrated using in vitro diffusion agar assays against the following organisms: Staphylococcus epidermidis,
Staphylococcus aureus, Streptococcus faecalis, Candida albicans, Escherichia coli, Serratia marcescens, and Acinetobacter calcoaceticus.
† Decreases viable microbe count on surface of product during handling and placement.
For educational materials to supplement this product visit www.Edwards.com/Education or contact your Edwards Lifesciences sales representative.
33
Customer Service and Ordering Information
Ordering Information
Mailing Address
Edwards Lifesciences
One Edwards Way
Irvine, CA 92614
Telephone
General Offices
Customer Service
Customer Service (fax)
Technical Support 24-Hour Emergency Assistance
949-250-2500
800-424-3278 (or 949-250-2500)
800-422-9329 (or 949-250-3489)
800-822-9837 (or 949-250-2222)
Electronic
Edwards Lifesciences is a partner of the Global Healthcare Exchange (GHX). You may also place orders on-line with
My Account, Edwards web ordering system, at www.Edwards.com. For more information about buying our products
using My Account or GHX, please speak with a Customer Service Representative.
Web Site
www.Edwards.com/CriticalCare
In Canada
Edwards Lifesciences, Inc.
800-268-3993
Terms and Conditions
Prices subject to change without prior notice. All applicable taxes will be charged.
Payment
Net 30 days except in Canada where payment terms are in accordance with those stated on the invoice.
Freight
FOB shipping point (prepaid and billed). All merchandise should be inspected on arrival. If merchandise has been damaged
in transit, please instruct your receiving department to refuse delivery; then notify Customer Service for further instructions.
Return Goods Policy
Edwards Lifesciences is committed to providing our customers with quality products and service. For this reason,
we will happily accept any product for return that:
• is a result of error by Edwards
• does not perform to specification
Full credit or replacement will be issued for these products, and no restocking fee will be assessed.
Products returned for other than the above reasons will be subject to a 20% restocking fee.
Authorization is required for all returns. Authorization may be obtained through the Customer Service Department.
A Return Goods Authorization number will be issued, and this number must be referenced on all returned packages.
The following merchandise is not acceptable for return:
Customer Service and
Ordering Information
• sterile items that are returned without the factory seals intact
• special order products
• incomplete kits or cases
• product which has less than 13 months of shelf life
Products that have been used must be packaged as described in “Instructions for Returning Used Products.”
A Technical Support Hotline is available for discussion of all issues regarding disposable products and electronic equipment
repair. For technical assistance on these issues, please call: 1-800-822-9837 or 949-250-2222.
A Technical Support Specialist will review the problem and issue authorization for the return if the problem cannot be
resolved. This authorization is required on all electronic equipment issues. Please be prepared to provide the Technical
Support Representative with a purchase order number for the repair.
As part of an ongoing effort to improve the quality of our products, we would like any defective product to be returned
for evaluation. Credit or replacement will be issued upon Edwards receipt of the defective product.
For educational materials to supplement any of the products in this catalog visit www.Edwards.com/Education or contact your Edwards Lifesciences
sales representative.
34
Instructions for Returning Used Product
Edwards Lifesciences requests that all products be double-bagged prior to returning them and, if possible, please
follow these instructions prior to bagging:
• Prior to handling used product, put on disposable gloves and gown according to hospital procedures.
• Visually inspect the product and remove all needles.
• Remove all external organic material by carefully wiping the exterior surface with gauze pad or paper towel
saturated with tap water.
• Carefully wipe exterior surface of electrical components and connections.
• Wipe dry with gauze or paper towel.
• Wiping may also be done using one of the following:
-rubbing alcohol
-normal saline
-Cidex
-Omnicide
• Do not use any other cleansing agents other than those listed above; other agents may interfere with
evaluation testing.
• CAUTION:
Do not flush blood products from lumens or pressure tubing.
Do not immerse or submerge product in water.
Do not wrap product in tissue paper or apply adhesive tape directly to product; attachments to the product or
writing on the product may interfere with evaluation testing.
• Double-bag using two self-sealing plastic bags. First, place product in one bag and seal. Then place bagged product
in second bag and seal.
• Wash hands with soap and water.
• Complete Returned Goods Documentation, describing the reason for return, and staple or paper clip it to top of
plastic bag.
NOTE: Documentation must remain on the outside of the plastic bag to avoid contamination. Attach customer
identification label to outside of plastic bag. Place bagged product into shipping container, place mailing label with
Edwards Lifesciences address on the shipping container, and mark the container with the wording “Used Product.”
For Return of Multiple Components or Kits:
• Double-bag each complete kit separately.
• Place all individual plastic bags in one large plastic bag, when possible. Then place large bag in shipping container.
Reminder: The purpose of this procedure is only to clean the outer surface area of used product, not to decontaminate
it. Should you have any questions regarding these procedures, please call the Edwards Lifesciences Complaints Hotline
at 800-424-3278 or 949-250-3612.
In Canada, please call: 800-268-3993 or: 905-821-9660
Return Address
Customer Service and
Ordering Information
All Products
Edwards Lifesciences Corporation
1402 E. Alton Avenue
Irvine, CA 92606 USA
Attention Return Goods - RGA #______________________
Technical Assistance - 24 Hours
For technical assistance relative to the use, care, and operation of critical-care products,
call toll-free 800-822-9837 or 949-250-2222, or via e-mail at [email protected]
For educational materials to supplement any of the products in this catalog visit www.Edwards.com/Education or contact your Edwards Lifesciences
sales representative.
35
Notes
A heritage of developing leading solutions
that advance the care and treatment of the critically ill
Since the introduction of the Swan-Ganz catheter in the early 1970s,
Edwards Lifesciences has partnered with clinicians to develop products and
systems that advance the care and treatment of the critically ill. What has
resulted is an extensive line of hemodynamic monitoring tools including catheters,
sensors and bedside patient monitors that continue to build on this
gold standard in critical care medicine.
Critical care clinicians around the world have used Edwards products to clinically
manage more than 30 million patients. Hemodynamic monitoring products such
as Swan-Ganz catheters, the FloTrac system and PreSep and PediaSat oximetry
catheters enable clinicians to make more informed and rapid decisions when
treating patients in surgical and critical care settings.
For educational information visit:
www.Edwards.com/CriticalCare
Rx only. See instructions for use for full prescribing information.
Edwards, Chandler, CO-Set+, Flex-Tip, IntroFlex, SAT-2, and Vigilance II are trademarks of Edwards Lifesciences Corporation. Edwards Lifesciences, the stylized E logo, AMC Thromboshield,
CardioCath, CCOmbo, CCOmbo V, ControlCath, Explorer, FloTrac, Hi-Shore, Multi-Med, Paceport, PediaSat, PreSep, Swan-Ganz, TruCal, TruWave, VAMP, VAMP Jr., VAMP Plus, Vantex,
Vigilance, Vigileo, VIP, and VIP+ are trademarks of Edwards Lifesciences Corporation and are registered in the U.S. Patent and Trademark Office.
ChloraPrep is a trademark of Medi-Flex, Inc. CLC 2000 is a registered trademark of ICU Medical, Inc. Early Goal-Directed Therapy is a service mark of Dr. Emanuel Rivers. EGDT is a
registered service mark of Dr. Emanuel Rivers. Futura is a trademark of Futura Medical Group. Interlink is a trademark of Baxter International, Inc., registered in the U.S. Patent and
Trademark Office. Oligon is a trademark of Implemed, Inc. Omnicide is a trademark of Southern Mill Creek Products Co., Inc. PhysioTrac is a trademark of Jetcor, Inc. Point-Lok is a
trademark of Portex, Inc. SafetyGlide is a trademark of Becton, Dickenson and Company.
© 2009 Edwards Lifesciences LLC. All rights reserved. AR04126
Edwards Lifesciences LLC · One Edwards Way · Irvine, CA 92614 USA · 949.250.2500 · 800.424.3278 · www.Edwards.com/CriticalCare