macrom1999 332

macrom1999 332
5/09/01 16:12
Page 1
Car Audio Equipment
CarAudio Equipment
MACROM Ltd.
Dublin, Ireland
Swiss Branch: Via Moree, 3 - CH 6850 Mendrisio
Tel. +41.91.6460010
Fax +41.91.6460128
Due to continuing product improvement, the features and the design are subject to change without notice. 99.03
Copyright © 1999 - MACROM Ltd. reserves all rights.
N
O
T
F
O
R
J
U
S
T
A
N
Y
O
N
E
macrom1999 332
5/09/01 16:12
Page 2
TO SOME, MUSIC IS LIKE A
DAY IS LIKE A HOLIDAY.
IMPRESSIVE, BUT THE PRINTED WORD
THE BEST. THESE MUSIC LOVERS
IF YOU ARE UNFAMILIAR WITH THIS WELL-
CANNOT IN ANY WAY CONVEY THE THRILL,
AS THEY EAT, DRINK, DREAM AND
ARE A SELECT BAND OF AUDIOPHILES WHO
ESTABLISHED EUROPEAN BRAND OF HIGH-
INVOLVEMENT AND DELIGHT OF MUSIC
FALL IN LOVE. FOOD FOR THE SOUL. THEY
APPRECIATE THE FINER THINGS IN LIFE.
QUALITY CAR AUDIO, BROWSE THROUGH THE
DELIVERED BY MACROM. SO WHY NOT HEAR
SEARCH OUT THE VERY BEST SOUNDING IN-
THEY LOVE LIFE, LOVE MUSIC AND ADORE
FOLLOWING
FOR YOURSELF? THEN YOU’LL UNDERSTAND
CAR HI-FI AND FIND MACROM: NOT THE BEST
THEIR MACROM CAR HI-FI. FOR THEM, EVERY
TECHNOLOGY
SOUNDTRACK TO THEIR LIVES,
KNOWN, BUT CERTAINLY
PAGES.
AND
YES,
MACROM’S
FEATURES
ARE
WHY MACROM IS NOT FOR JUST ANYONE. BUT
FOTO OLYMPIA
MAYBE FOR YOU.
macrom1999 332
5/09/01 16:13
Page 3
Amplifiers
The amplifier is the heart
of any car audio system, the
power engine which gives energy to
the loudspeakers at its command.
Yet it is also the all-controlling brain.
Accurate amplification opens the
window on a world of unlimited
sound and Macrom models are
certainly both accurate and powerful.
Macrom presents four different series,
each with very specific features,
enabling select audiophiles to choose
the one which suits their taste and
pocket.
SYNTHESIS
Every aspect of design and
performance is at the highest level.
The finest sounding car hi-fi you are
likely to find. An undisputed
reference for those who want the
very best of the best.
(See pages 6 & 7).
SYNTECH
Exceptional sound quality and
dynamics, a myriad of features and
revolutionary hi-tech design
re-creates music with dramatic
realism.
SYNPOWER
The same design concepts and
technology, incredible dynamic
impact and sound character as
the Syntech series. Developed
and manufactured to make the
emotional experience of car audio
accessible to the younger
generation.
(See pages 10 & 11).
SYNBASIC
Superior sound, features and
flexibility. This entry-level range
is strong enough to compete with
anything else in this section of the
market. Incredible value for the
first step into Macrom sound.
(See pages 12 & 14).
ACTIVE X-OVERS
(See page 15).
FOTO ICP - Milano
(See pages 8 & 9).
macrom1999 332
5/09/01 16:13
Page 4
2 OR 1 CHANNEL ESOTERIC AMP
For maximum flexibility, may be used as a subwoofer amp in
a one channel configuration or a two channel amp in stereo
configuration.
BUILT FOR EXTREME SOUND QUALITY AND
PERFORMANCE
Sound and power are exploited to the full, with no
compromises.
IHF POWER 1500 W (1000W BRIDGED UNDER 2Ω)
A power rating that speaks for itself, no additional
comment required.
HIGH QUALITY COMPONENTS FOR HIGH QUALITY
SOUND
Top quality transistors, 1 % tolerance resistors, polyester caps,
ultra fast diodes, 17,600 µF on the power supply, symmetrical
construction.
OVERSIZED DESIGN (HEATSINK, TRANSFORMER,
CONNECTORS...)
4x21 mm2 for power supply, 4x10 mm2 for speakers, 1,000W
power transformer, 3 kilo heatsink.
FCA TECHNOLOGY: 21 MM2 CONNECTORS FOR AN
EXTERNAL CAP
The connection is positioned in the perfect place, close
to the MOSFETs, no losses, constant voltage
level, great sound quality.
(FCA = Fast Cap Access).
SPECIFICATIONS:
IHF POWER
RMS Power at 12V
1500 W
2 X 500 W @ 1 Ω
2 X 250 W @ 2 Ω
2 X 125 W @ 4 Ω
Bridged power
500 W @ 4 Ω
1000 W @ 2 Ω
Frequency response
10 Hz-50 kHz (+0/-1 dB)
Signal to noise ratio
> 100 dB
Total harmonic distortion
0.08%
Input sensitivity/Impedance 200-8,000 mV/22 kohms
Active high pass crossover variable from 30 to 600 Hz, 12 dB/Oct
Active low pass crossover
variable from 30 to 600 Hz, 12 dB/Oct
(12 or 24 dB/Oct in bridged mode)
Pre-out with variable
crossover
LP, HP or by-pass 30 to 600 Hz, 12 dB/Oct
1 Ω stereo compatible (2Ω bridged)
Trimode
Dimensions
259 x 67 x 320 mm
DCT TECHNOLOGY FOR THE TRANSISTORS
ON THE POWER STAGES
Capacitors are soldered directly onto the transistors to increase
speed and dynamics (DCT = Direct Cap on Transistor).
Graph 1
50° C REGULATED FAN CONNECTORS
FOR AN EXTERNAL FAN
An external regulated fan may be connected.
SYNTHESIS1000
1 Ω (STEREO) AND 2 Ω (BRIDGED) COMPATIBLE
To satisfy all requirements.
ULTRA COMPLETE INTERNAL
ACTIVE CROSSOVER (HP OR LP)
From 30 to 600 Hz, 12 dB/Oct for HP plus 30 to 600 Hz,
12 dB/Oct or 24 dB/Oct (bridged) for LP.
LINE OUT WITH CROSSOVER
(HIGH PASS 12 DB OR LOW PASS 12/24 DB)
If required, this connection allows an external amp
to be controlled by the internal crossover.
OVERSIZED FULLY REGULATED
PWM MOSFET POWER SUPPLY
Extremely large 1,000W power
transformer for incredible power
and sound quality.
SYNTHESIS1000
Graph 2
SYNTHESIS1000
ALL THE ADJUSTMENTS ARE
POSITIONED ON THE TOP
OF THE AMPLIFIER
There is no need to disconnect the
amp when you want to tune of it.
300Hz
300Hz
SYNTHESIS1000
50Hz-300Hz
Graph 1
A 3+1-way system (electronic Sub and passive 3-way) can be
obtained. It is possible to connect a Sub to a traditional system by
using the pre-out with its relative crossover,
thereby optimising the acoustic output.
Graph 2
Thanks to this amplifier's flexibility it is possible to have a 3+1-way
multi-amplifier Sub, Midbass and Satellites system with midrange and tweeter cut in
passive mode. For optimum results, connect the three amplifiers in cascade, using the
pre-outputs with the relative crossovers built-in to the amplifiers,
without requiring external Electronic Crossovers.
6
50Hz
65Hz
SYNTHESIS1000
65Hz
65Hz
7
macrom1999 332
5/09/01 16:13
Page 5
4, 3 OR 2 CHANNELS
For maximum flexibility.
2 OR 1 CHANNEL
For maximum flexibility, may be used as a subwoofer amp in a one channel configuration or a two channel amp in stereo
configuration.
QUADRUPLE POWER WITH 4 Ω BRIDGED
From 100 W to 400 W for maximum control of the subwoofer.
CONTINUOUSLY VARIABLE 12 DB/OCT LOW PASS OR HIGH PASS CROSSOVER
For fine-tuning and flexibility (continuously variable from 30 to 600 Hz, 12 dB/Oct).
PRE-OUT WITH VARIABLE ELECTRONIC
CROSSOVER (LP/HP)
To feed the next amp with a filtered signal (variable
from 30 to 600 Hz, LP, HP or by-pass, 12 dB/Oct).
CONTINUOUSLY VARIABLE 12 DB/OCT LOW PASS
OR HIGH PASS CROSSOVER
For fine-tuning and flexibility (continuously
variable from 30 to 600Hz, 12 dB/Oct).
EXTERNAL BASS CONTROL
To control the sub woofer level
from inside your car.
(EBC is included with the
amp - i.e. it is
not an extra).
YOU CAN CONNECT THE AMP WITH 2
OR 4 RCA INPUTS
The gain controls are still independent whether
using 2 or 4 RCA inputs.
PWM REGULATED DC/DC MOSFET POWER SUPPLY
For extreme efficiency and reliability.
GOLD PLATED CONNECTORS
To avoid oxidation and to preserve
the original sound quality over the years.
TRIPLE PROTECTION
(Thermal, short circuit, low impedance)
for security and reliability.
ST 4.075
SPECIFICATIONS:
IHF POWER
RMS Power at 12.5 V
650 W
4 X 150 W @ 2 Ω
4 X 75 W @ 4 Ω
2 X 300 W @ 4 Ω
Bridged Power
2 Ω stereo compatible (4 Ω bridged)
Frequency response
10 Hz-50 kHz (+0-1 dB)
Signal to Noise Ratio
> 105 dB
Total harmonic distortion
0.08%
Input sensitivity/Impedance
200-4,000 mV/22 kohms
Dimensions
212 x 67 x 445 mm
EXTERNAL BASS
CONTROL
To control the sub woofer level
from inside your car.
(EBC is included with the amp - i.e.
it is not an extra).
PWM REGULATED DC/DC MOSFET
POWER SUPPLY
For extreme efficiency, reliability and acoustic
performance.
TRIMODE AVAILABLE
For two satellites and one subwoofer on the same amplifier
(but in passive mode).
GOLD PLATED CONNECTORS
To avoid oxidation and preserve the original sound quality
over the years.
8
TRIPLE PROTECTION
(Thermal, short circuit, low impedance) for security and reliability.
ST 2.100
SPECIFICATIONS:
Power handling
RMS Power at 12.5 V
Bridged power
Frequency response
Signal to Noise Ratio
Total harmonic distortion
Input sensitivity/Impedance
Pre-out with crossover,
LP, HP or by-pass
Dimensions
500 W
2 X 200 W @ 2 Ω
2 X 100 W @ 4 Ω
400 W @ 4 Ω
10 Hz-50 kHz (+ 0 - 1 dB)
> 105 dB
0. 08%
200-4,000 mV/22 kohms
variable from 30 to 600Hz
212 x 67x 405 mm
9
macrom1999 332
5/09/01 16:13
Page 6
2 OR 1 CHANNEL
For maximum flexibility, may be used as a subwoofer amp in a one channel configuration or a two channel amp in stereo configuration.
4, 3 OR 2 CHANNELS
For maximum flexibility.
2 Ω (STEREO) AND 4 Ω (BRIDGED) COMPATIBLE
VARIABLE ELECTRONIC CROSSOVER (LOW PASS OR HIGH PASS)
For fine-tuning and flexibility (continuously variable 30 to 600 Hz, 12 dB/Oct.).
CONTINUOUSLY VARIABLE 12 DB/OCT LOW PASS OR HIGH PASS CROSSOVER
For fine tuning and flexibility (continuously variable from 30 to 600 Hz, 12 dB/Oct).
2 Ω (STEREO) AND 4 Ω (BRIDGED) COMPATIBLE
TRIMODE AVAILABLE
For two satellites and one sub with the
same amp (but in passive
mode).
YOU CAN CONNECT THE AMP WITH 2 OR 4 RCA INPUTS
The gain controls are still independent whether using 2 or 4 RCA imputs.
GOLD PLATED CONNECTORS
To avoid oxidation and preserve the original sound quality
over the years.
TRIPLE PROTECTION
(Thermal, short circuit, low impedance) for security and reliability.
DC/DC MOSFET POWER SUPPLY
For greater efficiency and reliability.
SP 2.100
SP 2.050
SPECIFICATIONS:
IHF Power
RMS Power at 14.4 V
SPECIFICATIONS:
IHF Power
RMS Power at 14.4 V
Bridged power
Frequency response
Signal to Noise Ratio
Input sensitivity/Impedance
Total harmonic distortion
Dimensions
10
SP 4.050
550 W
2 X 200 W @ 2 Ω
2 X 120 W @ 4 Ω
400 W @ 4 Ω
10 Hz-50 kHz (+0 -1 dB)
100 dB
200-4,000 mV/22 kohms
0.08 %
212 x 65 x 355 mm
Bridged power
Frequency response
Signal to Noise Ratio
Input sensitivity/Impedance
Total harmonic distortion
Dimensions
MOSFET POWER SUPPLY
For extreme efficiency and reliability.
250 W
2 X 120 W @ 2 Ω
2 X 60 W @ 4 Ω
200 W @ 4 Ω
10 Hz-60 kHz (+0 -1 dB)
100 dB
200-4,000 mV/22 kohms
0.08 %
212 x 65 x 225 mm
GOLD PLATED CONNECTORS
To avoid oxidation and to preserve the original sound
quality over the years.
TRIPLE PROTECTION
(Thermal, short circuit, low impedance) for security
and reliability.
SPECIFICATIONS:
IHF POWER
RMS Power at 14.4 V
500 W
4 X 90 W @ 2 Ω
4 X 60 W @ 4 Ω
Bridged Power
2 X 180 W @ 4 Ω
Frequency response
10 Hz-50 kHz (+0 -1 dB)
Signal to Noise Ratio
> 100 dB
Total harmonic distortion
0.08 %
Input sensitivity/Impedance
200-4,000 mV/22 kohms
Trimode/Mixed mono operation 3/2/1 channel
Dimensions
212 x 65 x 355 mm
11
macrom1999 332
5/09/01 16:13
Page 7
2 OR 1 CHANNEL
For maximum flexibility.
QUADRUPLE POWER UNDER 4 Ω BRIDGED
(From 70 to 270 W) for maximum control of the sub.
2 Ω (STEREO) AND 4 Ω (BRIDGED) COMPATIBLE
CONTINUOUSLY VARIABLE 12 DB/OCT LOW PASS
OR HIGH PASS CROSSOVER
For fine-tuning and flexibility.
TRIMODE/MIXED MONO OPERATION
3/2/1 CHANNEL AVAILABLE
For two satellites and one sub with the same amp
(but in passive).
GOLD PLATED CONNECTORS
To avoid oxidation and to preserve the original sound
quality over the years.
TRIPLE PROTECTION
(Thermal, short circuit, low impedance)
for security and reliability.
PWM REGULATED DC/DC MOSFET POWER SUPPLY
For extreme efficiency and reliability
41.06
SPECIFICATIONS:
IHF Power
RMS Power
Frequency response
Signal to Noise Ratio
Total harmonic distortion
Input sensitivity/Impedance
Dimensions
240 W
1 X 240 W @ 1 Ω
1 X 120 W @ 2 Ω
1 X 60 W @ 4 Ω
10 Hz-600 Hz (+ 0 - 1dB)
> 100 dB
0.08%
200-2,000 mV/10 kohms
217 x 49 x 150 mm
MONO AMP
1 Ω COMPATIBLE
For trouble free use with many subs
(you can buy one, two, three... 4 Ω subs).
QUADRUPLE POWER WITH 1 Ω
(From 60 W to 240 W) for maximum control of the sub.
18 DB/OCT LOW PASS VARIABLE ELECTRONIC CROSSOVER
For fine-tuning and flexibility (Low Pass variable from 30 to 600 Hz).
PRE-OUT (12 DB/OCT HP) WITH VARIABLE ELECTRONIC CROSSOVER
For cascade connection to other amps with fine tuning and great flexibility
(HP variable from 30 to 600 Hz).
24 DB/OCT VARIABLE SUBSONIC FILTER
Adjustable from 15 to 150 Hz to improve sound quality by decreasing
distortion. Also important for protecting the subs.
PWM REGULATED DC/DC MOSFET POWER SUPPLY
For extreme efficiency, reliability and acoustic performance.
BASS EQ ADJUSTABLE FROM 0 TO 12 DB
To shake the subs, if needed (centred at 45 Hz).
“WAVE ALIGNMENT” (ADJUSTABLE PHASE FROM 0° TO 180°)
To adjust the staging.
GOLD PLATED CONNECTORS
To avoid oxidation and to preserve the original sound quality over the years.
TRIPLE PROTECTION
(Thermal, short circuit, low impedance) for security and reliability.
12
42.25
42.27
SPECIFICATIONS
2/1 CHANNEL AMP
IHF Power
RMS Power
SPECIFICATIONS:
2/1 CHANNEL AMP
IHF Power
RMS Power
Bridged power
Crossover
Frequency response
Signal to Noise Ratio
Total harmonic distortion
Input sensitivity/Impedance
Input mode selector
Dimensions
230 W
2 X 100 W @ 2 Ω
2 X 50 W @ 4Ω
160 W @ 4 Ω
Variable from 30Hz to 600 Hz,
LP or HP, 12dB/Oct
10 Hz-50 kHz (+0 -1 dB)
> 100 dB
0.08%
200-4,000 mV/22 kohms
mono, stereo or mixed (L+R)
217 x 49 x 170 mm
Bridged power
Crossover
Frequency response
Signal to Noise Ratio
Total harmonic distortion
Input sensitivity/Impedance
Input mode selector
Dimensions
400 W
2 X 140 W @ 2 Ω
2 X 70 W @ 4 Ω
270 W @ 4 Ω
Variable from 30Hz to 600 Hz,
LP or HP, 12dB/Oct
10 Hz-50 kHz (+0 -1 dB)
> 100 dB
0.08%
200-4,000 mV/22 kohms
mono, stereo or mixed (L+R)
217 x 49 x 190 mm
13
macrom1999 332
5/09/01 16:13
Page 8
4, 3 OR 2 CHANNELS
For maximum flexibility.
TRIPLE POWER UNDER 4 Ω BRIDGED
(From 50 to 150 W) for maximum power.
2 Ω (STEREO) AND 4 Ω (BRIDGED)
COMPATIBLE
CONTINUOUSLY VARIABLE 12 DB/OCT
LOW PASS OR HIGH PASS CROSSOVER
For fine-tuning and flexibility (continuously
variable from 30 to 600Hz, 12dB/Oct).
YOU CAN CONNECT THE AMP
WITH 2 OR 4 RCA INPUTS.
The gain controls are still independent
whether using 2 or 4 RCA inputs.
PWM REGULATED DC/DC MOSFET POWER SUPPLY
For extreme efficiency and reliability
GOLD PLATED CONNECTORS
To avoid oxidation and preserve the original sound quality over the years.
44.50
TRIPLE PROTECTION
(Thermal, short circuit, low impedance) for security and reliability.
SPECIFICATIONS:
IHF Power
RMS Power
480 W
4 X 100 W @ 2 Ω
4 X 50 W @ 4 Ω
Bridged power
2 X 150 W @ 4 Ω
Frequency response
10 Hz-50 kHz (+0 -1 dB)
Signal to Noise Ratio
> 100 dB
Total harmonic distortion
0.08%
Input sensitivity/Impedance
200-4,000 mV/22 kohms
Trimode / Mixed mono operation 3/2/1 channel
Dimensions
217 x 49 x 280 mm
Genuine
professional
electronic
crossovers are the
heart of a true hi-fi
system and naturally
MACROM offers you
the best and most flexible
on the market.
5 CHANNELS
Only one amp for a complete system
Combining these crossovers with each other or with the
built-in crossovers of MACROM’s programmable amplifiers, is an
easy way of obtaining 3, 4, 5 or 6-way active systems.
Thanks to the original cutting frequency of these crossovers, a high end
6-way active crossover can be obtained at a competitive price just by
connecting a 48.22 unit in cascade with a 48.13 and 48.12.
BUILT-IN CROSSOVERS
Front/Rear variable crossover:
flat, 80 or 120 Hz HP, 12 dB/Oct.
Subwoofer variable crossover:
50, 60 or 120 Hz LP, 12dB/Oct.
Dc-Dc converters, separate
low-, mid- and high-pass output level
controls, infinite electronic crossover
design, fine asymmetrical adjustment
DEDICATED DC/DC MOSFET POWER SUPPLY
One for front & sub and one for rear,
with these two power supplies you eliminate ground loops,
achieving better sound quality and greater reliability.
48.12
48.13
48.22
2-Way - Asymmetrical Electronic Crossover
dc-dc converter: ± 15V
12 dB slope per octave
Selectable crossover frequencies:
50, 800 or 860 Hz - 16kHz
Stereo/Mono switch
Level adjustment: ± 6 dB
Phase selector
Pre-amplified Bypass
Frequency response: 10 Hz - 50kHz (±1 dB)
S/N: 100 dB
Dimensions: 193x39x120 mm
2/3-Way- Asymmetrical Electronic Crossover
dc-dc converter: ± 15V
12 dB slope per octave
Selectable crossover frequencies:
50, 1600 and 250 Hz - 6kHz
Stereo/Mono switch
Level adjustment: ± 6 dB
Phase selector
Frequency response: 10 Hz - 50kHz (±1 dB)
S/N: 100 dB
Dimensions: 193x39x120 mm
2-Way Front & Rear - Asymmetrical Electronic
Crossover
dc-dc converter: ± 15V
Mono/Stereo switch:
24 dB/12dB per octave subwoofer slope
Subwoofer wave alignment
(continuous from 0° to 180°)
Subwoofer fading option
Adjustable crossover frequencies: 30 - 600 Hz
12 dB level adjustment
Two inputs with pre-amplified bypass or four front
& rear inputs
Frequency response: 10 Hz - 50kHz (±1 dB)
S/N: 120 dB
Maximum output level: 7.5 Vrms
Dimensions: 193x39x120 mm
YOU CAN FEED THE AMP WITH 2 OR 4 RCA INPUTS
The gain controls are still independent whether
using 2 or 4 RCA inputs.
“WAVE ALIGNMENT” (ADJUSTABLE PHASE FROM 0° TO 180°)
To adjust the staging.
GOLD PLATED CONNECTORS
To avoid oxidation and preserve the original sound quality
over the years.
TRIPLE PROTECTION
(Thermal, short circuit, low impedance) for security and reliability.
14
of crossover frequencies, phase
switch on the low and high-pass
outputs and 2nd order Butterworth filters
are just a few of the high end features of these
exceptional signal processing systems.
45.40
SPECIFICATIONS:
IHF Power
RMS Power
Frequency response
Signal to Noise Ratio
Total harmonic distortion
Input sensitivity/Impedance
2 Ω compatible
Dimensions
490 W
2 x 90 W + 2 x 70 W + 160 W @ 2 Ω
2 x 45 W + 2 x 35 W + 80 W @ 4 Ω
10 Hz-50 kHz (+0 -1 dB)
> 100 dB
0.08%
200-4,000 mV/22 kohms
217 x 49 x 370 mm
15
macrom1999 332
5/09/01 16:14
Page 9
Loudspeak ers
If the amplifier is the heart and
brain, then loudspeakers are like
the legs, arms and body which
move in step with the music at their
command. The more faithful and
accurate the reaction, the finer and
more realistic the sound. Good
loudspeakers literally bring music
to life: with subtlety, power and
definition. Macrom’s loudspeaker
research and development is a
continuous pursuit of the most
accurate sounds,whether playing a
rock band, solo guitar or orchestral
concert. Although music is an
emotional and intangible
element, this is achieved through
the painstaking application of new
technologies, continual testing of
new material and ideas.
EUROCLASS
Combinable separates
(See pages 18 & 19).
SLIM EXTREME, UNIVERSAL
SYSTEMS, RACING SYSTEMS
Systems
(See pages 20 to 23).
I SERIES, RACING, UNIVERSAL,
CUSTOM FIT
Integrated speakers
(See pages 24 to 27).
SEPARATE COMPONENTS
Tweeters, midrange, midwoofers,
crossovers, grilles.
(See pages 30 to 33).
TECH FORCE
Subwoofers
(See pages 34 & 35).
This photograph is a
tangible example of the
innovative tecniques
that are the basis of the
spectacular power and
the thrilling acoustic
results which distinguish all
MACROM products.
macrom1999 332
5/09/01 16:29
Page 10
12 DB PASSIVE CROSSOVER INCORPORATED IN THE
BACK OF THE WOOFER
No need to find a place for the crossover box, this simple
arrangement helps you to save time...
COMBINABLE SEPARATES
“ECS” TECHNOLOGY: IT’S A COMPO AND AN INTEGRATED
SPEAKER
The tweeter is easily removable from the centre of the woofer to make
a 2-way compo system.
TWEETER ADJUSTMENT JUST BY TURNING IT
IN ITS SUPPORT
You can adjust the tweeter to flat in phase, flat out of phase, attenuated
in phase, attenuated out of phase. You just need two seconds to change
from one position to the other without moving from your seat.
“CMP” CONE (COMPOSITE METALISED PAPER)
The cone is coated with metallic dust for better rigidity. This new cone
has a great sound.
25 MM NEODYMIUM SOFT LINEN DOME TWEETER
Large diameter for improved response and greater power.
The tweeter adopts ferrofluid to increase cooling and power
handling. Linen dome for softness and precision.
54 MM ALUMINIUM HEXATECH VOICE
COIL WOOFER
For incredible dynamics. Light-weight aluminium voice coil
for effective cooling, hexagonal wire to fill the gap, large
diameter to achieve better guidance and to put more wire
in the gap.
WOOFER WITH TRIPLE STRONTIUM INTERNAL
MAGNETS
Triple magnets to increase the magnetic flux. The three
magnets are located inside the large coil. This ensures no
magnetic losses, all the flux is concentrated in the gap
where it is needed.
3 Ω VOICE COIL
To increase the sensitivity by about 1 to 1.5 dB.
Diagram of passive
crossover utilised.
MULTI MOUNTING KIT FOR THE TWEETER
You can install the tweeter built-in, surface-mounted or
inclined.
3 ,9 µ F
3 ,3 Ω
0,18mH
+
Frequency response with Tweeter option,
0 dB and - 3 dB.
ECS 2.50
+110
SPECIFICATIONS:
2-way compo system
Power handling
Frequency response
Sensitivity
Woofer impedance
Dimensions (DIN)
Mounting depth
Grilles not included
+100
+90
d
B
S
P
L
+80
+70
+60
+50
+40
+30
20
50 100 200
500
1k
2k
5k
10k 20k
100 W
50 Hz-25 kHz
90 dB
3Ω
13 cm (5")
65 mm
Hz
ECS 2.60
Frequency response with Tweeter option,
0 dB and - 3 dB.
+110
+100
+90
+80
d
B +70
S +60
P
L +50
+40
+30
20
50
100 200
500
1k
2k
5k
10k 20k
SPECIFICATIONS:
2-way compo system
Power handling
Frequency response
Sensitivity
Woofer impedance
Dimensions (DIN)
Mounting depth
Grilles not included
120 W
45 Hz-25 kHz
90 dB
3Ω
16/16.5 (6 1/4”)
68 mm
Hz
18
19
macrom1999 332
5/09/01 16:29
Page 11
SYSTEMS
CAR FILTER
These small assorted pieces of foam are most
important for car audio applications. When the
speaker is playing at low volumes, the filter
remains inactive, the cone is free, micro
information and details are there. When the
speaker moves more actively this filter begins to
block the air under the dome creating internal
pressure which has the effect of controlling the
speaker like an enclosure. This technology is very
important for car audio systems where it is almost
impossible to achieve a good enclosure in the door
SE 2.40
SPECIFICATIONS:
Power handling
Frequency response
Sensitivity (1W/1M)
Woofer Ø
Tweeter Ø
Crossover
90 W
50-25,000 Hz
89 dB
10 cm (4”)
43 mm(1 3/4”)
SE series with tweeter options
Dedicated Crossover:
- 2.8 kHz cutting point with graduated slope (6 to 12 dB)
- Inductance compensation network
- High quality capacitor in series with the tweeter
SE 2.50
SPECIFICATIONS:
Power handling
Frequency response
Sensitivity (1W/1M)
Woofer Ø
Tweeter Ø
Crossover
120 W
45-25,000 Hz
90 dB
13 cm (5”)
43 mm (1 3/4”)
SE series with tweeter options
SE 2.60
SPECIFICATIONS:
Power handling
Frequency response
Sensitivity (1W/1M)
Woofer Ø
Tweeter Ø
Crossover
150 W
45-25,000 Hz
91 dB
16/16.5 cm (6 1/4”)
43 mm (1 3/4”)
SE series with tweeter options
panels.
CONES
MACROM’s high end speakers use polypropylene cones which are more resistant to
water and thermal variations. This results in better reliability. The cone and the dome
are combined in a single unit, they are perfectly sealed so that no losses occur when the
car filter is active.
TWEETERS
MACROM tweeters are renowned as being among the best tweeters in the world. Most
systems use very large 28 mm voice coils which means you can put more wire in the air
gap to obtain more power and more transient response. The resonant frequency goes
as low as 900Hz.
NEODYMIUM MAGNETS FOR THE WOOFERS
Using neodymium enables dimensions to be reduced significantly. Thanks to their high
magnetic flux generating capability it is possible to produce small size speakers which
have exceptional performance.
20
GIANT VOICE COIL WITH INTERNAL MAGNETS
Large voice coils allow us to drive very flat cones avoiding cone breakage. Flat cones
are the best for open sound and good, realistic bass frequencies. The hexatech
aluminium voice coil makes the moving mass lighter compared to the same size coil
in copper. This means a higher transient response and high power.
21
macrom1999 332
5/09/01 16:29
Page 12
SYSTEMS
SYSTEMS
UNS
2.41
SPECIFICATIONS:
2-way compo system
Power handling
Frequency response
Sensitivity
Impedance
Installation depth
Grilles included
Dimensions (DIN)
UNS 2.41
SPECIFICATIONS:
2-way compo system
Max. music power
Frequency response
Sensitivity
Installation depth
Diameter
80 W
60 Hz-25 kHz
90 dB
3Ω
44 mm
10 cm (4”)
“VPC” CONE (VELVET PAPER CONE)
For a smoother, sweeter frequency response
and significant reduction in harmonic distortion.
12 DB/OCT EXTERNAL CROSSOVER
12 dB high pass for ideal coupling between the woofer
and tweeter as well as enhanced tweeter protection.
18 MM POLYMER DOME TWEETER
WITH MULTI MOUNTING KIT
Smoother frequency response.
Very easy to install in any position.
RGS 2.40
ANTI-RESONANCE BASKET
To improve sound quality.
ALUMINIUM VOICE COIL
For greater heat dissipation and higher power handling.
EXTENDED VENTED POLE PIECE
For greater heat dissipation which increases power handling.
RUBBER SUSPENSION AND STRONTIUM MAGNET
For enhanced reliability and improved efficiency.
RGS 2.50
FERROFLUID COOLED TWEETER
For improved heat dissipation and greater
power handling.
3 Ω VOICE COIL
To increase sensitivity by about 1 dB.
REINFORCED SPIDER
For an increase of about 10 %
in power handling.
13 cm (5”)
KEVLAR CONE
For high sensitivity and high performance.
13 MM POLYMER DOME TWEETER
MULTI INSTALLATION KIT FOR TWEETER
REINFORCED SPIDER
For increased power handling.
ANTI-RESONANCE BASKET
To improve sound quality.
100 W
50-25,000 Hz
91 dB
54 mm
13 cm (5”)
P.E.S.V. VOICE COIL
STRONTIUM MAGNET
For enhanced efficiency.
RUBBER SUSPENSION
For better reliability.
SUITABLE FOR FACTORY CUT-OUTS
RGS 2.60
UNS 2.51
100 W
50 Hz-25 kHz
91 dB
3Ω
56 mm
SPECIFICATIONS:
2-way compo system
Max. music power
Frequency response
Sensitivity:
Installation depth
Diameter
RGS 2.40
RGS 2.50
UNS 2.51
SPECIFICATIONS:
2-way compo system
Power handling
Frequency response
Sensitivity
Impedance
Installation depth
Grilles included
Dimensions (DIN)
80 W
60-25,000 Hz
90 dB
43 mm
10 cm (4”)
UNS
2.61
SPECIFICATIONS:
2-way compo system
Power handling
Frequency response
Sensitivity
Impedance
Installation depth
Grilles included
Dimensions (DIN)
120 W
45 Hz-25 kHz
91 dB
3Ω
64 mm
RGS 2.60
SPECIFICATIONS:
2- way compo system
Max. music power
Frequency response
Sensitivity
Installation depth
Diameter
120 W
45-25,000 Hz
92 dB
56 mm
16/16.5 cm (6 1/4”)
16/16.5 cm (6 1/4”)
UNS 2.61
22
23
macrom1999 332
5/09/01 16:29
Page 13
I 2.50
SPECIFICATIONS
Neodymium Magnet with Bi-Wiring
Power handling
100 W
Frequency response
60-25,000 Hz
Sensitivity (1W/1M)
89 dB
Diameter
13 cm (5”)
Installation depth
58 mm
INTEGRATED SPEAKERS
I 2.40
SPECIFICATIONS
Four Magnet with Bi-Wiring
Power handling
80 W satellite
50 W full range
Frequency response
80-25,000 Hz
Sensitivity (1W/1M)
89 dB
Diameter
10 cm (4”)
Installation depth
49 mm
CONES
MACROM’s high end speakers use polypropylene cones which are more
resistant to water and thermal variations.
This results in better reliability.
TWEETERS
MACROM tweeters are renowned as being among the best tweeters in the
world. The I series tweeters use very large 28 mm voice coils which means
you can put more wire in the air gap to obtain more power and more
transient response. The resonant frequency goes as low as 900Hz.
NEODYMIUM MAGNETS
Using neodymium enables dimensions to be reduced significantly. Thanks
to their high magnetic flux generating capability it is possible to produce
small size speakers which have exceptional performance.
GIANT VOICE COIL WITH INTERNAL MAGNETS
Large voice coils allow us to drive very flat cones avoiding cone breakage.
Flat cones are the best for open sound and good, realistic bass frequencies.
The hexatech aluminium voice coil makes the moving mass lighter
compared to the same size coil in copper.
This means a higher transient response and high power.
BI-WIRING
Bi-wiring means feeding the tweeter and the woofer separate signals for
I 2.60
SPECIFICATIONS
Neodymium Magnet with Bi-Wiring
Power handling
120 W
Frequency response
50-25,000 Hz
Sensitivity (1W/1M)
90 dB
Diameter
16/16.5 cm (6 1/4”)
Installation depth
60 mm
more faithful reproduction and another first for the house of MACROM.
The Bi-wiring option allows these speakers to be bi-amplified or used
with an external passive crossover specifically designed to suit the car in
question.
DOUBLE HORN
The I 2.50 and I 2.60 are supplied with a pair of additional “open” horns
which can be used to replace the standard horn to change the angle of
dispersion of the high and mid-high frequencies.
The horns are screwed down so changing them is a simple operation.
And these, together with the extraordinary acoustic results, are only
some of the features which earned the I series I 2.60 ECAP’s “Best
Product of the Year 1996” and the I series I 2.50 the Las Vegas WCES
“1997 Innovation Award”.
MACROM created two different magnet circuits incorporated in a single magnet system to
drive both the woofer and tweeter which, mounted concentrically, represent a true pointsource speaker. The soft dome tweeter’s 28 mm (1 1/8”) diameter voice coil is situated inside
the magnet system whereas the 54 mm (2 1/4”) voice coil which drives the mid-bass
frequencies is situated outside the magnet system. The tweeter is fitted with a rear chamber
inside the woofer’s magnet circuit which allows faithful reproduction of even the lowest
range of the medium frequencies by eliminating disturbing hollow sounds.
The original design of the tweeter allows phase integration between the two units. Another
unusual feature of the I series is the exceptional off-axis dispersion, proven by laboratories
all over the world, which allows the best acoustic results even at 60° angles.
The 6x9 speaker continues to be in high demand in many
markets because of its easy to install design and the fact that it
represents a simple solution to many problems.
Its oval shape however, usually makes the cone acoustically
unbalanced.
In designing these 2-way 6x9 units MACROM has managed
to satisfy the demand for 6x9 units while making minimum
compromises regarding acoustic results. In fact, these units
are characterised by deep bass and clear vocals.
For particularly complex systems, the bi-wiring option
enables external passive crossovers to be adopted to modify
the crossing point between the two units.
The 62.90 is at the top of its category and uses MACROM’s
exclusive soft dome tweeter.
62.90
2-way coaxial speaker
Max. music power
Frequency response
Sensitivity
Dimensions
Soft dome tweeter Ø
Bi-wiring
24
150 W
40-25,000 Hz
92 dB
16x23 cm (6x9”)
20 mm
25
macrom1999 332
5/09/01 16:30
Page 14
INTEGRATED SPEAKERS
DIN STANDARD BASKET
To enable easier installation and more flexibility. Furthermore,
the 16.5 cm basket can be converted to fit 16 cm factory cut-outs
just by removing the four small lugs.
UN 2.41
VPC CONE (Velvet Paper Cone)
The cone is now covered with a special type of velvet which
allows a smoother, sweeter frequency response and significant
reduction in harmonic distortion.
3 Ω VOICE COIL
With this new voice coil we have increased the efficiency by 1 dB.
UN 2.51
REINFORCED SPIDER
Achieving an approximate 10% increase in power handling.
INTEGRATED SPEAKERS
CF 2.47
UNLIMITED TECHNOLOGY
It really means something here!
“PP” CONE (polypropylene)
For a smoother, sweeter frequency response and a
significant reduction in harmonic distortion.
POLYMER DOME TWEETER
Smoother frequency response and greater sensitivity
at high frequencies.
CF 2.31
13 MM DOME TWEETER
Smoother frequency response and greater sensitivity at high
frequencies. Sound quality is improved considerably.
UN 2.61
ANTI-RESONANCE BASKET
To improve sound quality.
CF 2.51
ALUMINIUM VOICE COIL
To improve heat dissipation and increase power handling.
CF 2.41
STRONTIUM MAGNET
To enhance efficiency.
RUBBER SUSPENSION
To improve reliability.
UN 2.69
13 MM FERROFLUID COOLED TWEETER
For improved heat dissipation
and greater power handling.
REINFORCED SPIDER
For increased power handling.
ANTI-RESONANCE BASKET
To improve sound quality.
ALUMINIUM VOICE COIL
To improve heat dissipation
and increase power handling.
STRONTIUM MAGNET
To enhance efficiency.
RUBBER SUSPENSION
To improve reliability.
SPECIFICATIONS:
MODEL
Integrated speakers
Max. music power
Frequency response
Sensitivity
Impedance:
Dimensions (DIN)
Installation depth
Grilles included
26
UN 2.41
2-way
80 W
60 Hz-25 kHz
90dB
3Ω
10 cm (4”)
44 mm
◆
UN 2.51
2-way
100 W
50 Hz-25 kHz
91dB
3Ω
13 cm (5”)
56 mm
◆
UN 2.61
2-way
120 W
45 Hz-25 kHz
91dB
3Ω
16/16.5 cm (6 1/4”)
64 mm
◆
UN 2.69
2-way
120 W
40 Hz-25 kHz
91dB
3Ω
16x23 cm (6x9”)
73 mm
◆
SPECIFICATIONS:
MODEL
Integrated speakers
Max. music power
Frequency response
Sensitivity
Installation depth
Diameter
CF 2.61
CF 2.31
2-way
60 W
70-25,000 Hz
90 dB
32 mm
8.7 cm (3 1/4”)
CF 2.41
2-way
80 W
60-25,000 Hz
90 dB
40 mm
10 cm (4”)
CF 2.47
2-way
80 W
50-25,000 Hz
90 dB
40 mm
10x15 cm (4x6”)
CF 2.51
2-way
100 W
45-25,000 Hz
91 dB
54 mm
13 cm (5”)
CF 2.61
2-way
120 W
45-25,000 Hz
91 dB
56 mm
16/16.5 cm (6 1/4”)
27
macrom1999 332
5/09/01 16:30
Page 15
INTEGRATED SPEAKERS
KEVLAR CONE
For high sensitivity and high performance.
REINFORCED SPIDER
For increased power handling.
RG 2.50
ANTI-RESONANCE BASKET
To improve sound quality.
RG 2.31
RG 2.40
RG 2.60
P.E.S.V. VOICE COIL
STRONTIUM MAGNET
To improve efficiency.
RUBBER SUSPENSION
To enhance reliability.
SUITABLE FOR FACTORY CUT-OUTS
RG 2.46
RG 3.69
SPECIFICATIONS:
MODEL
Integrated speakers
Max. music power
Frequency response
Sensitivity
Installation depth
Diameter
28
RG 2.31
2-way
60 W
70-20,000 Hz
90 dB
32 mm
8.7 cm (3 1/4”)
RG 2.40
2-way
80 W
50-25,000 Hz
90 dB
41 mm
10 cm (4”)
RG. 2.46
2-way
80 W
50-25,000 Hz
91 dB
40 mm
10x15 cm (4x6”)
RG. 2.50
2-way
100 W
45-25,000 Hz
92 dB
53 mm
13 cm (5”)
RG. 2.60
2-way
100 W
45-25,000 Hz
92 dB
54 mm
16/16.5 cm (6 1/4”)
RG. 3.69
3-way
120 W
45-25,000 Hz
91 dB
73 mm
16x23 cm (6x9”)
29
macrom1999 332
5/09/01 16:30
Page 16
TWEETERS AND MIDRANGE
Like all MACROM products these speakers are based upon a sophisticated project concept.
An exclusive design characterises these outstanding compact tweeters which incorporate an acoustic lens with the dual function
of protecting the dome and achieving an excellent off-axis frequency response.
Thanks to MACROM’s high technology and the amazing 28 mm diameter hand-processed dome,
a resonant frequency of below 900 Hz has been obtained.
This low resonant frequency allows excellent 2-way systems to be produced where the use of a
midrange is not possible or can make a sweeter and more harmonic crossing point between the
midrange and tweeter in a 3-way system.
These tweeters also boast high power handling, liquid cooling and a broad frequency response.
They are all supplied with a new kit of accessories which cover all installation requirements.
SPECIFICATIONS:
MODEL
57.10
NeoMac™
single magnet
Power handling at 5 kHz/12dB
80W
Frequency response
2,500-20,000 Hz
Sensitivity (1W/1m)
90 dB
Resonant frequency
900 Hz
Diameter
42 mm (1 3/4”)
P.E.S.V. voice coil
28 mm
Hexatech voice coil
Impendance
5Ω
Installation depth
10 mm
Noedymium magnet
◆
Hand processed dome fabric
Selected soft linen
◆
Multi installation kit
◆
Grilles included
-
57.11
single magnet
100W
2,500-22,000 Hz
91 dB
900 Hz
42 mm (1 3/4”)
28 mm
5Ω
10 mm
◆
◆
◆
-
57.13
double magnet
120W
2,500-25,000 Hz
93 dB
900 Hz
42 mm (1 3/4”)
28 mm
5Ω
10 mm
◆
◆
◆
-
57.18
single magnet
80W
2,500-22,000 Hz
90 dB
40 mm (1 3/4”)
18 mm
4Ω
16 mm
◆
◆
◆
57.19
single magnet
80W
2,500-25,000 Hz
90 dB
38 mm (1 1/2”)
19 mm
4Ω
14 mm
◆
◆
◆
57.16 S
A reference tweeter for car hi-fi systems.
A high flux triple magnet system, an incredibly rigid,
hand-processed silk dome and a double chamber for adequate
venting result in extremely low resonant frequencies (700 Hz!),
extraordinary power handling and absolutely unbeatable clarity.
SPECIFICATIONS:
Matched Pair Tweeter
Power handling at 5 kHz/12 dB
Frequency response
Sensitivity (1W/1m)
Resonant frequency
Diameter
Hexatech voice coil
Hand processed dome fabric
57.10
57.11
57.13
200 W
1,800 - 25,000 Hz
92 dB
700 Hz
10 cm (4”)
28 mm
58.08
SPECIFICATIONS:
NeoMacTM Dome Midrange
Power handling
80 W
Frequency response
400-7,000 Hz
Sensitivity (1W/1m)
90 dB
Resonant frequency
420 Hz
C.A.R. filter
Hexatech voice coil
54 mm (2 1/8”)
Installation
76 mm (3”)
Installation depth
25 mm (1”)
Diameter
8.7 cm (3 1/3”)
Hand treated dome fabric
MIDRANGE
MACROM considers the midrange the most important
part of the whole sound spectrum. In fact, these are the
most fundamental frequencies for the majority
of musical instruments and it is therefore important to
use components capable of reproducing them perfectly.
MACROM’s 58.08 is the first midrange to incorporate a
revolutionary magnet system consisting of four
30
57.18
57.19
neodymium segments which pilots the 54 mm diameter voice coil
obtaining results that would require an absurdly large traditional magnet.
The plastic body eliminates any dispersion of magnetic flux and reduces
the weight of the unit even further.
Thanks to the extremely rigid dome driven by the 54 mm diameter voice
coil, this speaker reproduces the midrange with such speed
and transparency that an amazingly life-like sound is produced.
The extremely low resonance allows crossover points from 800 Hz
and a total lack of cone break-up allow 6 dB per octave filters to be used.
31
macrom1999 332
5/09/01 16:30
Page 17
CROSSOVERS
SPECIFICATIONS:
MODEL
MIDWOOFERS, CROSSOVERS
AND GRILLES
MACROM’s objective of building a woofer with deep,
full-bodied bass, an excellent transient response and
increased power handling without mounting the
woofer in a cabinet led to the development of the
unique C.A.R. (Controlled Acoustic Resistance) turbo
duct principle.
The unusual low dispersion multi-magnet systems used for MACROM’s midrange and
woofers have rear vents equipped with acoustic filters (C.A.R. filters).
The air pressure within the magnet system created by the cone movement is released
through this duct, dampened by the C.A.R. device positioned inside which controls the
speaker's acoustic resistance accordingly.
This results in a more accurate bass and higher power handling without the need for
additional rear loading.
The final effect is close to that of a conventional cabinet hi-fi system, simply by mounting
the speaker in the door panels or on a rear shelf.
59.10
SPECIFICATIONS:
Triple Magnet Midwoofer
Power handling
Frequency response
Sensitivity (1W/1m)
Resonant frequency
C.A.R. filter
Hexatech voice coil
Installation diameter
Installation depth
Diameter
95.86
2-way crossover
with tweeter option
Power handling
200 W
Crossover point
5,000 Hz
Slope/octave
12 dB
Combines with existing crossover to create
a 3 way system
Low-pass output below
400 Hz to mid-bass
High Pass output (400 Hz up) to next
crossover or Satellite
Three tweeter options +3 dB, 0 flat, -3 dB
ABS cabinet
◆
Gold-plated screw terminals
◆
Dimensions
80x34x107 mm
95.87
3-way crossover
200 W
800 - 5,000 Hz
12 dB
95.89
2-way dividing
filter
200 W
400 Hz
12 dB
-
◆
-
◆
◆
◆
80x34x107 mm
◆
◆
◆
80x34x107 mm
90 W
55-7,200 Hz
88 dB
107 Hz
54 mm (2 1/8”)
9.4 cm
49 mm
10 cm (4”)
59.13
SPECIFICATIONS:
Double Magnet Midwoofer
Power handling
Frequency response
Sensitivity (1W/1m)
Resonant frequency
C.A.R. filter
Hexatech voice coil
Installation diameter
Installation depth
Diameter
100 W
45-5,000 Hz
88 dB
58 Hz
75 mm (3”)
11.8 cm
47 mm
13 cm (5”)
GRILLES
SPECIFICATIONS:
MODEL
Diameter
95.64 B
10 cm (4”)
95.65 B
13 cm (5”)
95.66 B
16.5 cm (6 1/4”)
59.17
SPECIFICATIONS:
Double Magnet Midwoofer
Power handling
Frequency response
Sensitivity (1W/1m)
Resonant frequency
C.A.R. filter
Hexatech voice coil
Installation diameter
Installation depth
Diameter
32
120 W
45-5,000 Hz
91 dB
80 Hz
75 mm (3”)
13.8 cm
64 mm
16/16.5 cm (6 1/4”)
33
macrom1999 332
5/09/01 16:30
Page 18
TFe
UNPRESSED PAPER CONE
Computer-aided cone design for smooth frequency
response. Use of long fibre impregnated paper to
produce undistorted sound and assure durability.
SUBWOOFERS
PP (POLYPROPYLENE) DUST CAP WITH LOGO
Inverted PP dust cap with relief logo to promote a
high-tech appearance.
DIE-CAST ALUMINIUM FRAME
Heavy-duty frame structure maintains an ultra-precise
alignment of all components and dissipates heat from
the motor assembly.
ONE-PIECE EXTENDED POLE
The backplate and extended pole piece are combined in a single unit
to maximise magnetic efficiency and increase the cone’s excursion.
FLAT AND PROGRESSIVE SPIDER
Durable resin-impregnated flat and progressive spider provides
precise coil alignment and critical cone movement control.
2” VOICE COIL
The 2” voice coil has an aluminium former to optimise the magnetic
flux and dissipate heat effectively.
RUBBER SURROUND
The butly rubber surround allows linear cone excursion and
dampens cone resonance.
This ensures undistorted dynamic peaks and clarity at all levels.
FRONT & REAR GASKETS.
These ensure an airtight seal.
ENCLOSURE USE
Subwoofers designed specifically for use in small enclosures.
SPECIFICATIONS:
MODEL
Max. music power
Frequency response
Sensitivity
Installation depth
Aluminium voice coil
Diameter
For enclusure use
TFf
UNPRESSED PAPER CONE
Computer-aided cone design for smooth frequency response. Use of long fibre
impregnated paper to produce undistorted sound and assure durability.
PP (POLYPROPYLENE) DUST CAP WITH LOGO
Inverted PP dust cap with relief logo to promote a high-tech appearance.
SPECIFICATIONS:
MODEL
Max. music power
Frequency response
Sensitivity
Installation depth
Aluminium voice coil
Diameter
For open-air use
TFe 8.0
500 W
40-600 Hz
90 dB
98 mm
51 mm (2”)
20 cm (8”)
◆
TFe 10.0
600 W
32-800 Hz
91 dB
105 mm
51 mm (2”)
25 cm (10”)
◆
TFf 10.0
500 W
35-1,000 Hz
91 dB
105 mm
51 mm (2”)
25 cm (10”)
◆
TFe 12.0
800 W
30-900 Hz
91 dB
130 mm
51 mm (2”)
30 cm (12”)
◆
TFf 12.0
600 W
33-900 Hz
91 dB
125 mm
51 mm (2”)
30 cm (12”)
◆
SHOCK RESISTANT METAL FRAME
To prevent vibration, ensure precise alignment and give a solid motor
structure support.
NOISELESS VENT
The extensive venting of the pole piece eliminates noise and
distorsion of the airflow created by the cone excursion.
FLAT AND PROGRESSIVE SPIDER
Durable resin-impregnated flat and progressive spider provides
precise coil alignment and critical cone movement control.
2” VOICE COIL
The 2” voice coil has an aluminium former to optimise the magnetic
flux and dissipate heat effectively.
BLACK FOAM SURROUND
With long-throw, positive-roll design to control extreme cone excursions.
FRONT & REAR GASKETS
These ensure an airtight seal.
FREE AIR USE
Subwoofers designed specifically for use in free air (infinite baffle installations).
34
35