2012 Rockford Fosgate

Transcription

New Products
3SIXTY.3 Digital Signal Processor
Punch Boosted Rail Amplifiers
Prime 2ch, 4ch and Mono Amplifiers
Punch P3 Shallow Subwoofers
Punch P3 Shallow Loaded
Punch Powered Loaded
Power 6”, 6.5”, 6.75” Coaxials & Components
Punch 6”, 6.5”, 6.75” Coaxials & Components
Prime 6”, 6.5”, 6.75” Coaxials & Components
Punch PRO Speakers
Marine Full Range D Amplifiers
Marine Wake Tower Speakers
11 //3SIXTY.3
The ultimate signal processor
7 //Processors
13 //AMPLIFIERS
27 //PUNCH BOOSTED RAIL AMPLIFIERS
NEW 2ch and mono additions
29 //PRIME 2ch, 4ch & MONO AMPLIFIERS
Same value, smaller size
45 //PUNCH P3 SHALLOW SUBWOOFERS
More punch less space
33 //SUBWOOFERS
52 //PUNCH P3 SHALLOW LOADED
Stuffed w/ the next gen of P3 shallows
53 //PUNCH POWERED LOADED
An all-in-one dream come true
6”, 6.5”, 6.75” COAXIALS
71 //POWER
& COMPONENTS
61 //SPEAKERS
Not all 6’s are created equal
6”, 6.5”, 6.75” COAXIALS
73 //PUNCH
& COMPONENTS
Sized to fit
79 //MARINE
6”, 6.5”, 6.75” COAXIALS
75 //PRIME
& COMPONENTS
Who wants to throw down?
77 //PUNCH PRO SPEAKERS
HIGH output, guaranteed!
91 //ACCESSORIES
83 //MARINE FULL RANGE D AMPLIFIERS
Create your own wake
97 //SPECIFICATIONS
NEW FEATURE
Download http://gettag.mobi to your
mobile phone and then take a photo
to connect with online content.
©2012 Rockford Corporation. All Rights Reversed.
ROCKFORD FOSGATE, PUNCH, 3SIXTY and
associated logos where applicable are registered
trademarks of Rockford Corporation in the United
States and/or other countries. All other trademarks
are the property of their respective owners.
Specifications subject to change without notice.
FRD
FULL RANGE CLASS D
EFFICIENCY IN IT’S PRIME
INNOVATION & DESIGN
MARINE FRD Amplifiers Feature:
• Rockford’s Marine PRIME FRD amplifiers utilize a high efficiency Class D amplifier
design for reduced current consumption from the charging system and improved
power density.
• Onboard variable Punch EQ from 0dB to +18dB @ 45Hz with optional Punch EQ level
control (mono models only).
• Conformal coated PCB and UV resistant finish for UV & Salt-Fog protection.
• Compact focused mass die-cast heatsink design with integrated top-mount controls.
• Low impedance stability 2 ohm stereo and 1 ohm mono.
Full Range Class D
©2012 Rockford Corporation
• Available in 750 or 1200 watt mono models (R750-1D or R1200-1D) and 400 or 600
watt 4 channel models (R400-4D or R600-4D).
Rockford Fosgate MARINE amplifiers, available at authorized retailers worldwide
rockfordfosgate.com • 800.366.2349
Meet the Family.
The Standard.
Push the
Envelope.
Throw Down.
SIGNAL PROCESSORS
SEAMLESS INTEGRATION
The 3Sixty.3 is the ultimate signal
processor from Rockford Fosgate.
Functioning as an OEM integration "black box" or a complete
surround sound Digital Signal
Processor.
BALANCED LINE DRIVER
ADD SOME JUICE
If your source unit has low output
voltage or induced noise, the
RF-BLD is a perfect addition to
any systems needs.
3SIXTY
Proprietary Rockford Technology
When you make a product purchase that bears the Rockford Fosgate name, you are receiving the
technology, engineering, and innovation that has taken over three decades to hone. Our constant
desire to push the performance envelope has lead us to develop proprietary amplifier topologies
and acoustic/electrical technologies that put a spin on the normal and make it Rockford.
bluetooth
All features are controlled via Bluetooth or cable interface on
Apple or PC capable devices along with A2DP wireless audio
streaming via optional dongle
RF link
Rockford’s proprietary RF Link is a bus-power component
connection system enabling integration and control of all RF
Link equipped products. The use of this system allows for the
expansion of auxiliary controls and managed system turn on.
frequency normalization of audio
signals
U.S. Patent (7,778,718,B2)
Frequency normalization is achieved by characterizing the
frequency response of the audio source based on a reference
input signal. This reference input signal is used to establish a
reference frequency response, which is stored in memory and
used to select equalizer settings. The system restores missing
spectral content by summing multiple input signals from the
audio source. The system then normalizes the frequency
response based on characterizations of the signal by utilizing
equalizer settings from memory.
9
2012 BUYERS GUIDE 3SIXTY TECHNOLOGIES
3SIXTY GRAPHIC USER INTERFACE (GUI)
3Sixty interactive graphic user interface allows for control of the crossover type, slope, high/low pass filter, the 248 band
parametric eq, phase, and time delay.
INPUT CHANNEL CONFIGURATOR
OUTPUT CHANNEL CONFIGURATOR
CHANNEL SUMMING CONFIGURATOR
ADJUSTING INPUT GAIN
NEW
3 S I X T Y. 3 S I G N A L P R O C E S S O R
3SIXTY.3
Frequency Normalization of Audio Signals
US Patent # 7,778,718,B2
The new 3sixty.3 interactive signal processor is the perfect solution for those customers
who want to add aftermarket equipment to their factory source unit, integrate their mobile
devices, or have complete control over their audio signal. With features like Bluetooth
streaming, selectable crossover types and a USB interface, the versatility is endless.
• RCA and high level inputs (8 Channels)
• 31 band parametric EQ per channel
• Phase control
• Time delay
• Interactive graphic user interface
11 2012 BUYERS GUIDE
• Aux input
• Digital input (SPDIF)
• Subwoofer volume control, master volume
control, and/or Punch EQ via wired remote
• A2DP wireless audio streaming
BALANCED LINE DRIVER
RF-BLD
Integrate to a factory head unit or add some juice to a low-voltage aftermarket
unit, the 3Sixty Balanced Line Driver (BLD) will get your signal across.
Featuring ‘Balanced Differential’ or ‘Single Ended’ mode, its high voltage
output combined with a low output impedance will drive large arrays of
amplifiers without breaking a sweat.
3SIXTY.3
RF-BLD
Input/Output
AUX Inputs
Input Voltage
Output Voltage
8 Speaker/RCA
Balanced/Unbalanced
Stereo/Digital
(SPDIF)
2V-24V
8V RMS
Unbalanced/Balanced
2 Speaker/RCA
Balanced/Unbalanced
N/A
650mV-10.5V
11V RMS Unbalanced
22V RMS Balanced
Auto
Turn-On
Remote
Dimensions
6V DC Offset
Level/PEQ/
EQ Presets/
Input
H 1.75” x W 5.125” x L 9.25”
6V DC Offset
N/A
H 1.32” x W 5.90” x L 4.09”
AMPLIFIERS
PUSH THE ENVELOPE
POWER amplifiers are the
culmination of over 30 years of
pushing the envelope in amplifier
technology. These amplifiers
deliver unprecedented power &
control in the hands of the most
discriminating audio fanatic.
THE STANDARD
AMPLIFIER INTRO
(NEED PHOTOS)
Rockford Fosgate’s PUNCH has
revolutionized the industry.
PUNCH amps combine
Rockford’s heritage with the latest
technology in a compact package.
When you’re ready to haul the
mail, PUNCH amps will get the
job done.
THROW DOWN
Breaking new ground in both
performance and value, PRIME
amplifiers take advantage of
Rockford technologies at a level
that everyone can attain.
AMPLIFIERS
+20
+18
+16
+14
Punch Equalization
+12
U.S. Patent (21,323)
+10
+8
+6
+4
+2
-0
-2
20
50
100
200
BASS
500
Hz
1k
2k
5k
10k 20k
TREBLE
In the early 70’s, Jim Fosgate studied the acoustical
properties of automobiles by using a real time analyzer.
Jim discovered multiple problems common in all
vehicles; a midbass hump, a steep high frequency roll
off and reduced bass response. This research lead
to adding Punch EQ to Rockford Fosgate amps to
help correct the acoustical deficiencies found in the
automotive listening environment. The new Punch
EQ2 is an on-board equalization circuit that when
set to Low-Pass (LP) operation, becomes a variable
Bass Boost. When set to High-Pass (HP) operation, it
acts as a variable Mid-Bass and Treble Boost. When
set to All Pass (AP) operation, both Bass and Treble
frequencies are boosted.
HEATSINK
ALUMINIUM
MOSFET
THERMAL
GREASE
CERAMIC
Maximum Efficiency Heat
Sink Application
MEHSA3 heat management technology takes heat sink
efficiency to a new level. The key was to create a dielectric
layer between the ceramic topside and the aluminum base
that retains all of the electrical isolation and capacitive
coupling of the early material increasing its thermal
conductivity. The higher power handling results in a 20%
reduction in thermal impedance.
4/2/1
The ability to deliver continuous total RMS rated power to the
speaker(s) in any impedance ranging between 4 ohm through
1 ohm.
15 2012 BUYERS GUIDE AMPLIFIER TECHNOLOGIES
T2500-1bdCP
WITH
WITHOUT
3000
2500
240
220
200
180
160
140
120
100
80
2000
20
Music and speakers have a dynamic relationship. As the
frequency of music varies, so does the impedance of the
speaker. Rockford Fosgate’s Constant Power circuit design
actively monitors and increases voltage and current as the
speaker’s impedance rises with music. Resulting in up to a
25% increase in total amplifier power.
60
U.S. Patent (Patent Issued)
3500
40
Constant Power
Output Power
4000
Frequency
Dynamic Thermal Management
U.S. Patent (Patent Pending)
Our engineers at Rockford Fosgate have developed an
award winning cooling design called DTM (Dynamic Thermal
Management). This patent pending design seamlessly
manages the output and power supply temperatures, while
evenly distributing the excess heat across the entire amplifier.
THERMAL IMAGE WITHOUT
THERMAL IMAGE WITH
Non Multiplying Advanced Decision
Safe output protection is handled by our proprietary NOMAD
circuit. NOMAD is an analog computer designed to calculate
the maximum level of safe current allowable for each output
device (based on their instantaneous voltage drop). This
allows the protection to be much more precise than ever
before; offering protection against:
• Reverse Polarity
• Short Circuit
• Thermal
• Low Impedance
• Under/Over Voltage
CEA-2006
Power ratings on Rockford Fosgate amplifiers conform to
CEA-2006 industry standards. These guidelines mean your
amplifier’s output power ratings are REAL POWER numbers,
not inflated marketing ratings.
rockfordfosgate.com
Don’t forget to use our Woofer Wiring Wizard to properly
wire woofers to your amplifier or our Amp Wire Calculator to
optimize output with properly sized wire.
POWER AMPLIFIERS
T1500-1bdCP
Power Series amplifiers are the best your money can buy. The heart of ANY system,
how your amplifier performs is directly related to how loud, long and clear your
system will play. Rockford Fosgate Power Series two & four channel amplifiers give
flexibility to your system design and the bd mono amps, with Constant Power, are the
most powerful amps we’ve ever developed. Are you ready to take your system to the
highest level and beyond?
TRANS•ana
Class BD
(TRANS conductance Active Nodal Amplifier)
U.S. Patent (RE40550)
The trans•ana topology operates the output stage with its full
voltage gain, which allows the input stage to operate from a
low voltage regulated supply. The signal is then shifted up
in level to the high voltage section by the driver stage which
forms an active node at ultrasonic frequencies. This results in
a very stable, highly linear operation.
The Rockford Fosgate bd topology is more efficient than
typical class AB and has lower distortion than class D
designs. Rockford bd amplifiers are 75-80% efficient vs. 2060% efficient class ab amplifiers. Delivering more power from
your amplifier with less drain on your vehicles electrical and
charging system.
NOMAD
MEHSATM
DTMTM
24dB/OCT Crossover
4 AWG C-Clamp
Connectors
Punch EQ w/ Optional PEQ
T1500-1bdCP
Differential RCA Inputs
AVERAGE EFFICIENCY
THERMAL MASS PER INCH
400-1500
WATTS
RMS POWER RANGE
Continuous rated power at lowest impedance.
Rated Power
Continuous power @ 4Ω
326
GRAMS
75.4 %
Frequency
Response
THD+N@
Rated Power
Input
Sensitivity
S/N
Ratio
Channel
Separation
Dimensions
T400-2
120x2 @ 4 OHMS
200x2 @ 2 OHMS
400x1 @ 4 OHMS BRIDGED
20Hz-20kHz
<0.05%
150MV - 5V
>105dB
>50dB
H 2.14” x W 8.14” x L 11.41”
T600-2
200x2 @ 4 OHMS
300x2 @ 2 OHMS
20Hz-20kHz
<0.05%
150MV - 5V
>105dB
>50dB
H 2.14” x W 8.14” x L 13.66”
T400-4
60x4 @ 4 OHMS
100x4 @ 2 OHMS
20Hz-20kHz
<0.05%
150MV - 5V
>105dB
>50dB
H 2.14” x W 8.14” x L 13.66”
T600-4
100x4 @ 4 OHMS
150x4 @ 2 OHMS
20Hz-20kHz
<0.05%
150MV - 5V
>105dB
>50dB
H 2.14” x W 8.14” x L 14.91”
T500-1bdCP
300x1 @ 4 OHMS
500x1 @ 2 OHMS
500x1 @ 1 OHMS
20Hz-250kHz
<0.5%
150MV - 5V
>100dB
N/A
T1000-1bdCP
700x1 @ 4 OHMS
1000x1 @ 2 OHMS
1000x1 @ 1 OHMS
20Hz-250kHz
<0.8%
150MV - 5V
>100dB
N/A
T1500-1bdCP
1000x1 @ 4 OHMS
1500x1 @ 2 OHMS
1500x1 @ 1 OHMS
20Hz-250kHz
<0.8%
150MV - 5V
>100dB
N/A
(SMALL CHASSIS)
(MEDIUM CHASSIS)
(MEDIUM CHASSIS)
(LARGE CHASSIS)
H 2.14” x W 8.14” x L 11.41”
(SMALL CHASSIS)
H 2.14” x W 8.14” x L 13.66”
(MEDIUM CHASSIS)
H 2.14” x W 8.14” x L 14.91”
(LARGE CHASSIS)
POWER XL-AMPLIFIERS
T2500-1bdCP
Class BD
designs. Rockford bd amplifiers are 75-80% efficient
vs. 20-60% efficient class ab amplifiers. Delivering
more power from your amplifier with less drain on your
vehicles electrical and charging system.
Power XL Series amplifiers with Constant Power
are the most powerful amplifiers on the market
PERIOD. Constant Power delivers up to 25% more
power across all impedance levels resulting in a
listening experience that’s cleaner, louder and more
impressive than ever before. Rockford’s proprietary
technology ACTIVELY monitors your music and
adjusts power to MAXIMIZE output.
POWER/SIGNAL VU METERS
NOMAD
DTMTM
MEHSATM
24dB/OCT Crossover
T2500-1bdCP
Balanced Differential
Panel Mount RCA Inputs
BDSync or Master/Slave
1/0 AWG. Stealth ConnectorS
AVERAGE EFFICIENCY
2500
WATTS
RMS POWER RANGE
Rated Power
T2500-1bdCP
1500x1 @ 4 OHMS
2500x1 @ 2 OHMS
2500x1 @ 1 OHMS
326
GRAMS
77.3 %
Frequency
Response
THD+N@
Rated Power
Input
Sensitivity
S/N
Ratio
Channel
Separation
20Hz-250kHz
<0.8%
150MV - 5V
>100dB
N/A
Dimensions
H 2.14” x W 8.14” x L 21.90”
(X-LARGE CHASSIS)
POWER AD AMPLIFIERS
T1000-4ad
Full Range Class ad
The Rockford Fosgate ad topology brings our high
efficiency bd amplifier design to a full range application.
Using our Dynamic Frequency Switching to increase the
switching frequency during lower output levels for better
signal resolution. Coupled with Post Choke Feedback
Filtering to compare the input signal to the output signal at
the speaker connector removing any unwanted distortion.
These technologies eliminate the inherent switching noise
associated with typical class D designs.
Power series ad technology is one of
a kind. High power in a small chassis,
independent channel regulation that
constantly monitors the power output
for maximum performance, and all the
customization features you expect from our
top of the line Power series amplifiers.
4-Point Thermal Monitoring
MEHSATM
24dB/OCT Crossover
4 AWG C-Clamp Connectors
T1000-4ad
AVERAGE EFFICIENCY
800-1000
WATTS
RMS POWER RANGE
326
GRAMS
84.5 %
Frequency
Response
THD+N@
Rated Power
Input
Sensitivity
S/N
Ratio
Channel
Separation
Dimensions
20Hz-20kHz
<1.0%
150MV - 5V
>95dB
>50dB
H 2.14” x W 8.14” x L 13.66”
T800-4AD
150x4 @ 4 OHMS
150x4 @ 2 OHMS
200x4 @ 1 OHMS
20Hz-20kHz
<1.0%
150MV - 5V
>95dB
>50dB
H 2.14” x W 8.14” x L 14.91”
T1000-4AD
250x4 @ 4 OHMS
250x4 @ 2 OHMS
250x4 @ 1 OHMS
Rated Power
(MEDIUM CHASSIS)
(LARGE CHASSIS)
PUNCH AMPLIFIERS
P1000-1bd
For over 25 years, Punch amplifiers have set the standard in the car audio amplifier industry
and they continue to do so today. Each of the Punch family amplifiers reproduce sonic
perfection along with impressive power in a compact chassis. It’s the reason that they have
become the most popular amplifiers in the world.
200-1000
WATTS
RMS POWER RANGE
275
GRAMS
TRANS•ana
(TRANS conductance Active Nodal Amplifier)
The trans•ana topology operates the output stage with its full
voltage gain, which allows the input stage to operate from a
low voltage regulated supply. The signal is then shifted up
in level to the high voltage section by the driver stage which
forms an active node at ultrasonic frequencies. This results in
very stable, highly linear operation.
AVERAGE EFFICIENCY
73.1 %
Class BD
designs. Rockford bd amplifiers are 75-80% efficient vs. 2060% efficient class ab amplifiers. Delivering more power from
your amplifier with less drain on your vehicles electrical and
charging system.
DTMTM
MEHSATM
NOMAD
12dB/OCT Crossover
4 AWG C-Clamp Connectors
P1000-1bd
Rated Power
Frequency
Response
THD+N@
Rated Power
Input
Sensitivity
S/N
Ratio
Channel
Separation
Dimensions
P200-2
50x2 @ 4 OHMS
100x2 @ 2 OHMS
20Hz-20kHz
<0.05%
150MV - 5V
>105dB
>50dB
H 2.20” x W 7.70” x L 8.90”
P300-2
75x2 @ 4 OHMS
150x2 @ 2 OHMS
20Hz-20kHz
<0.05%
150MV - 5V
>105dB
>50dB
H 2.20” x W 7.70” x L 8.90”
P400-2
100x2 @ 4 OHMS
200x2 @ 2 OHMS
20Hz-20kHz
<0.05%
150MV - 5V
>105dB
>50dB
H 2.20” x W 7.70” x L 10.30”
P500-2
125x2 @ 4 OHMS
250x2 @ 2 OHMS
20Hz-20kHz
<0.05%
150MV - 5V
>105dB
>50dB
H 2.20” x W 7.70” x L 13.00”
P400-4
50x4 @ 4 OHMS
100x4 @ 2 OHMS
20Hz-20kHz
<0.05%
150MV - 5V
>105dB
>50dB
H 2.20” x W 7.70” x L 13.00”
P500-4
60x4 @ 4 OHMS
125x4 @ 2 OHMS
20Hz-20kHz
<0.05%
150MV - 5V
>105dB
>50dB
H 2.20” x W 7.70” x L 13.00”
P300-1
150x1 @ 4 OHMS
300x1 @ 2 OHMS
20Hz-20kHz
<0.1%
150MV - 5V
>100dB
N/A
P400-1
200x1 @ 4 OHMS
400x1 @ 2 OHMS
20Hz-20kHz
<0.1%
150MV - 5V
>100dB
N/A
P500-1bd
200x1 @ 4 OHMS
400x1 @ 2 OHMS
500x1 @ 1 OHMS
20Hz-250kHz
<0.8%
150MV - 5V
>100dB
N/A
P700-1bd
225x1 @ 4 OHMS
450x1 @ 2 OHMS
700x1 @ 1 OHMS
20Hz-250kHz
<0.8%
150MV - 5V
>100dB
N/A
P1000-1bd
250x1 @ 4 OHMS
500x1 @ 2 OHMS
1000x1 @ 1 OHMS
20Hz-250kHz
<0.8%
150MV - 5V
>100dB
N/A
(MINI CHASSIS)
(MINI CHASSIS)
(SMALL CHASSIS)
(MEDIUM CHASSIS)
(MEDIUM CHASSIS)
(MEDIUM CHASSIS)
H 2.20” x W 7.70” x L 8.90”
(MINI CHASSIS)
H 2.20” x W 7.70” x L 8.90”
(MINI CHASSIS)
H 2.20” x W 7.70” x L 10.30”
(SMALL CHASSIS)
H 2.20” x W 7.70” x L 10.30”
(SMALL CHASSIS)
H 2.20” x W 7.70” x L 14.40”
(LARGE CHASSIS)
PUNCH FRD AMPLIFIERS
P1000X4D
CLASS D / FULL RANGE CLASS D
High efficiency amplifier design that reduces
current consumption from the charging system.
Packed with all the features you expect from a
Punch amplifer…housed in a smaller package
and ultra efficient with new Full Range Class
D technology. The Punch FRD amplifiers are
designed for versatility –lower current consuming
multi amp systems, space limited installs, and
single amp upgrades are just the start.
Punch EQ w/ Optional
Level Control*
Discrete Power/Protection Indicator
12 db/OCT Crossover
Removable
control cover
Differential
RCA Inputs
Set-Screw Connectors
P1000X4D
AVERAGE EFFICIENCY
WATTS
500-1000
Rated Power
264
GRAMS
RMS POWER RANGE
87.2 %
Frequency
Response
THD+N@
Rated Power
Input
Sensitivity
S/N
Ratio
Channel
Separation
Dimensions
P500X4D
75x4 @ 4 OHMS
125x4 @ 2 OHMS
20Hz-20kHz
<0.1%
150MV - 5V
>100dB
>50dB
H 2.20” x W 8.10” x L 10.70”
P1000X4D
150x4 @ 4 OHMS
250x4 @ 2 OHMS
20Hz-20kHz
<0.1%
150MV - 5V
>100dB
>50dB
H 2.20” x W 8.10” x L 11.90”
P1000X5D
75x4 + 200x1 @ 4 OHMS
125x4 + 500x1 @ 2 OHMS
250x2 + N/A @ 4 OHMS BRIDGED
20Hz-20kHz
<0.1%
150MV - 5V
>100dB
>50dB
H 2.20” x W 8.10” x L 11.90”
P1000X1D
500x1 @ 4 OHMS
1000x1 @ 2 OHMS
1000x1 @ 1 OHMS
20Hz-250Hz
<0.8%
150MV - 5V
>100dB
N/A
H 2.20” x W 8.10” x L 10.7 0”
*P1000X5D & P1000X1D
PUNCH BR AMPLIFIERS
PBR300X1
Ultra compact and featuring Rockford Fosgate’s patent pending Boosted Rail technology,
PBR300X4 and PBR300X1 are breaking new ground in efficient amplifier design. If you
have limited space in your vehicle, want to add audio to your motorcycle, or need a
simple installation solution… the new Punch BR amps are for you.
COUPLED
SWITCHED
COUPLED/SWITCHED
Boosted Rail Technology
To achieve higher efficiency with lower distortion, Rockford’s
br topology combines, Cycle-by-Cycle, an indirectly coupled
high/low voltage rail linear topology with a switched high/
low voltage linear rail topology. This combination yields an
unsurpassed power density (watts per cubic inch).
12DB/OCT Crossover
Boosted RaiL
MEHSATM
Variable High Level Adjust
Boost Indicator
PBR300X1
10 AWG Molex Connector
Optional PEQ
RCA/Speaker Level Inputs
W/ 6V DC Offset
RMS POWER RANGE
GRAMS
NEW
NEW
Rated Power
101
WATTS
300
AVERAGE EFFICIENCY
68.3 %
Frequency
Response
THD+N@
Rated Power
Input
Sensitivity
S/N
Ratio
Channel
Separation
Dimensions
PBR300X2
100x2 @ 4 OHMS
150x2 @ 2 OHMS
300x1 @ 4 OHMS BRIDGED.
20Hz-20kHz
<0.1%
150MV - 11V
>100dB
>50dB
H 1.50” x W 4.25” x L 6.75”
PBR300X4
75x4 @ 4 OHMS
20Hz-20kHz
<0.5%
150MV - 11V
>100dB
>50dB
H 1.50” x W 4.25” x L 6.75”
PBR300X1
75x1 @ 4 OHMS
150x1 @ 2 OHMS
300x1 @ 1 OHMS
20Hz-250Hz
<0.2%
150MV - 11V
>105dB
N/A
H 1.50” x W 4.25” x L 6.75”
PBR500X1
175x1 @ 4 OHMS
300x1 @ 2 OHMS
500x1 @ 1 OHMS
20Hz-250Hz
<0.1%
150MV - 11V
>105dB
N/A
H 1.50” x W 4.25” x L 8.75”
PRIME AMPLIFIERS
R250-4
Breaking new ground in both performance and value, PRIME amplifiers take advantage
of Rockford technologies at a level that everyone can attain. Available in six different
models and in two compact chassis sizes, with a 5-Channel model added this year.
Now more than ever, it’s easy to get Rockford Fosgate amplifier DNA into your car audio
system.
CLASS D
CLASS AB
The combination of a class B power output with the
class A low distortion attributes make class AB the most
common amplifier topology in the electronics industry.
R250-4
Punch bass
4 AWG SWWS (Smash wire w/ Screw)
NOTE: Remote Punch Level Control
(R250-1D, R500-1D, R500-1 Only)
RMS POWER RANGE
69.3 %
S/N
Ratio
Channel
Separation
Dimensions
NEW
Input
Sensitivity
R125-2
40x2 @ 4 OHMS
65x2 @ 2 OHMS
20Hz-20kHz
<0.1%
150MV - 8V
>90dB
>50dB
H 2.40” x W 7.70” x L 7.70”
NEW
THD+N@
Rated Power
R250-4
40x4 @ 4 OHMS
65x4 @ 2 OHMS
20Hz-20kHz
<0.1%
150MV - 8V
>90dB
>50dB
H 2.40” x W 7.70” x L 11.60”
R300-4
50x4 @ 4 OHMS
75x4 @ 2 OHMS
20Hz-20kHz
<0.1%
150MV - 8V
>90dB
>50dB
H 2.40” x W 7.70” x L 17.10”
R600-5
50x4 + 200x1 @ 4 OHMS
75x4 + 300x1 @ 2 OHMS
150x2 + N/A @ 4 OHMS BRIDGED
20Hz-20kHz
<0.1%
150MV - 8V
>90dB
>50dB
H 2.40” x W 7.70” x L 17.10”
NEW
Frequency
Response
R250-1D
125x1 @ 4 OHMS
250x1 @ 2 OHMS
20Hz-250kHz
<0.1%
150MV - 8V
>100dB
N/A
H 2.40” x W 7.70” x L 7.70”
NEW
Rated Power
111
GRAMS
WATTS
150-1000
AVERAGE EFFICIENCY
R500-1D
250x1 @ 4 OHMS
500x1 @ 2 OHMS
20Hz-250kHz
<0.1%
150MV - 8V
>100dB
N/A
H 2.40” x W 7.70” x L 7.70”
R500-1
320x1 @ 4 OHMS
500x1 @ 2 OHMS
20Hz-250kHz
<0.1%
150MV - 8V
>100dB
N/A
H 2.40” x W 7.70” x L 16.70”
PRIME FRD AMPLIFIERS
R600-4D
With a small chassis, lower power consumption,
and easy to use set-up controls, Prime Full Range
Class D amplifers are designed with both the first
time buyer and do-it-yourself installer in mind.
R600-4D
ON-BOARD PUNCH EQ
NOTE: Mono amplifiers feature remote
Punch EQ (R750-1D & R1200-1D)
Differential
RCA Inputs
4 AWG Set-Screw Connectors
RMS POWER RANGE
Rated Power
137
GRAMS
WATTS
400-1200
AVERAGE EFFICIENCY
85.1 %
Frequency
Response
THD+N@
Rated Power
Input
Sensitivity
S/N
Ratio
Channel
Separation
Dimensions
R400-4D
75x4 @ 4 OHMS
100x4 @ 2 OHMS
20HZ - 20khZ
<0.1%
150MV - 5V
>90dB
>50dB
H 2.00” x W 6.80” x L 9.10”
R600-4D
100x4 @ 4 OHMS
150x4 @ 2 OHMS
20HZ - 20khZ
<0.1%
150MV - 5V
>90dB
>50dB
H 2.00” x W 6.80” x L 11.10”
R750-1D
250x1 @ 4 OHMS
500x1 @ 2 OHMS
750x1 @ 1 OHMS
20HZ - 250hZ
<0.8%
150MV - 5V
>100dB
N/A
H 2.00” x W 6.80” x L 9.10”
R1200-1D
400x1 @ 4 OHMS
800x1 @ 2 OHMS
1200x1 @ 1 OHMS
20HZ - 250hZ
<0.8%
150MV - 5V
>100dB
N/A
H 2.00” x W 6.80” x L 11.10”
SUBWOOFERS
PUSH THE ENVELOPE
We’ve raised the bar, again. If
you’re looking to rattle windows and
set off car alarms in the next town
over, POWER subwoofers thump
bass PERIOD.
THE STANDARD
With 28 different models
PUNCH subs offer huge bass
and the right installation for
any system. Don’t just reach
your system’s potential.
PUNCH it.
THROW DOWN
Subs that are ready to ROCK and
throw down the lows without
emptying your wallet, PRIME
woofers are the perfect first step
into performance audio.
SUBWOOFERS
Vertical Attach Surround Technique
Rockford’s proprietary surround technique, VAST,
provides up to a 25% increase in the speakers
effective radiating cone area without complicated
installation issues. This design alters the typical design
and manufacturing technique by eliminating the large
flat glue surface area (the landing) which allows the
surround to be shifted for increased cone area. In
turn, both nominal efficiency and maximum output
capabilities are dramatically improved.
flex fit
The slot mounted frame pattern of the Flex Fit basket
utilizes slots (where feasible) instead of single screw
sized holes. This allows slight adjustment of the
speaker when mounted.
35 2012 BUYERS GUIDE SUBWOOFER TECHNOLOGIES
Selectable Woofer Impedance
Fused Termination
Removing and inverting the center plug allows nominal
impedance of voice coils to quickly be configured in a
Series or Parallel wiring configuration. This removable
impedance selection jumper also provides fused
protection in severe overload conditions.
Inductive Damping Heat Sink
Secures directly to the top of magnet structure to
improve system efficiency by reducing both distortion
and back EMF (Electo-magnetic force). Also radiates
heat to reduce voice coil temperature.
CEA-2031
Power handling on Rockford Fosgate speakers
conform to CEA-2031 industry standards. This means
your speaker has the capacity to handle power under
continuous demand, not instantaneous power handling
that over time can damage voice coils.
rockfordfosgate.com
Don’t forget to use our Woofer Wiring Wizard to properly
wire woofers to your amplifier or our Woofer Box Advisor for
optimized enclosure bass performance.
POWER T2 SUBWOOFERS
T2D212
The T2 is perfectly matched to Rockford’s Power
Series amplifiers. Built like a tank, on a precision
cast aluminum alloy basket with Rockford’s
proprietary IDHSTM cooling technique. Choose T2
and roll over the competition.
Subwoofer Anatomy
Variations in the anatomy of a loudspeaker dramatically changes their performance characteristics.
An increase in voicecoil size coupled with a stronger cone material yields a higher power handling and
increased output. By combining quality materials with Rockford proprietary speaker technologies in our
subwoofer lineup we are sure to meet your system demands.
SURROUND
Tall Profile, Santoprene™ w/ VAST™
CONE/DUSTCAP MATERIAL
M-Roll, Santoprene™ w/ VAST™
Hard Anodized Aluminum
Tall Profile, Santoprene™
Kevlar Fiber Paper/ Hard Anodized Aluminum
Half-Roll, Nitrile Butadiene Rubber
Kevlar Fiber Paper
Half-Roll, Sealed Polyether-ester Foam
Injection Molded Polypropylene
Polypropylene
SPIDER
Dual Mirror Imaged w/ Stitched
Lead Wire and Cooling Vents
Dual Laminated w/ Embedded Lead
Wire Cooling Vents
FRAME STRUCTURE
Single w/ Stitched Lead Wire and
Cooling Vents
Die-Cast Aluminum w/ FlexFitTM
Die-Cast Aluminum
Single Spider
StampCastTM w/ FlexFitTM
Stamped Steel
VOICE COIL
MOTOR STRUCTURE
4” 4-Layer High Temp. Aluminum
w/ NomexTM collar
Triple Stack Ferrite Magnet w/ IDHSTM
3” 4-Layer High Temp. Aluminum w/ Nomex collar
TM
Double Stack Ferrite Magnet w/ IDHSTM
2.50” 4-Layer High Temp. Aluminum w/ NomexTM collar
Double Stack Ferrite Magnet
Single Ferrite Magnet
2” 4-Layer High Temp. Aluminum w/ NomexTM collar
PEAK
POWER
SPL 148 dB
SPL numbers reflect an in-car response,
utilizing dual T2 12” subwoofers in a
typical sedan size cabin at peak power.
X-MAX
LINEAR EXCURSION
RMS Power
Handling
Peak Power
Handling
Nominal
Impedance
Sealed
Enclosure
Ported
Enclosure
Sensitivity
Mounting
Depth
T2D212/T2D412
1200 WATTS
2400 WATTS
DUAL 2Ω or 4Ω
N/A
2.00 CU. FT. PORT: (3) 3”x12”
85dB
9.00”
T2D215/ T2D415
1200 WATTS
2400 WATTS
DUAL 2Ω or 4Ω
N/A
2.75 CU. FT. PORT: (3) 6”x17”
87dB
10.00”
POWER T1 SUBWOOFERS
T1D215
Integrated/Removable Grille INCLUDED
Power Series T1 subwoofers are built with the Rockford
Fosgate technologies first seen in our all new full range
line. These bad boys have patented VAST technology that
increases surface cone area up to 25% so the T1 performs
like a much larger woofer. Flex Fit not only looks the part
but gives extreme flexibility for extreme installations.
Clean, high tech and ready to set off car alarms.
Subwoofer Anatomy
SURROUND
Kevlar Fiber Paper
Polypropylene
SPIDER
FRAME STRUCTURE
Wire Cooling Vents
Cooling Vents
Die-Cast Aluminum
Stamped Steel
Single Spider
VOICE COIL
MOTOR STRUCTURE
2.25” 4-Layer High Temp. Aluminum w/ Nomex collar
TM
TM
TM
PEAK
POWER
SPL 144 dB
X-MAX
LINEAR EXCURSION
RMS Power
Handling
Peak Power
Handling
Nominal
Impedance
Sealed
Enclosure
Ported
Enclosure
Sensitivity
Mounting
Depth
T1D210/T1D410
600 WATTS
1200 WATTS
DUAL 2Ω or 4Ω
0.75 CU. FT.
1.50 CU. FT. PORT: (1) 4”x11”
83dB
6.50”
T1D212/T1D412
800 WATTS
1600 WATTS
DUAL 2Ω or 4Ω
1.25 CU. FT.
1.75 CU. FT. PORT: (1) 4”x9”
86dB
6.90”
T1D215/T1D415
1000 WATTS
2000 WATTS
DUAL 2Ω or 4Ω
2.25 CU. FT.
2.66 CU. FT. PORT: (1) 4”x10”
88dB
8.40”
POWER T0 SUBWOOFERS
T0D412
Integrated/Removable Grille INCLUDED
Designed for the customer that demands more than
P3 performance but doesn’t quite have the power
for the T1, the new T0 line of subwoofers handle
more power and have more cone area (VAST).
Subwoofer Anatomy
SURROUND
Kevlar Fiber Paper
Polypropylene
SPIDER
FRAME STRUCTURE
Wire Cooling Vents
Die-Cast Aluminum
Cooling Vents
Stamped Steel
Single Spider
VOICE COIL
MOTOR STRUCTURE
PEAK
POWER
SPL 140 dB
X-MAX
LINEAR EXCURSION
RMS Power
Handling
Peak Power
Handling
Nominal
Impedance
Sealed
Enclosure
Ported
Enclosure
Sensitivity
Mounting
Depth
T0D210/T0D410
550 WATTS
1100 WATTS
DUAL 2Ω or 4Ω
0.75 CU. FT.
1.50 CU. FT. PORT: (1) 4”x11”
81dB
6.50”
T0D212/T0D412
700 WATTS
1400 WATTS
DUAL 2Ω or 4Ω
1.25 CU. FT.
1.75 CU. FT. PORT: (1) 4”x9”
84dB
6.90”
T0D215/T0D415
800 WATTS
1600 WATTS
DUAL 2Ω or 4Ω
2.25 CU. FT.
2.66 CU. FT. PORT: (1) 4”x10”
87dB
8.40”
PUNCH P3 SUBWOOFERS
P3D4-12
Optional Integrated Grille
The first improvement you will notice on the new P3
subwoofers is that VAST increases the area of the
anodized aluminum cone. We also added a StampCast
basket with Flex Fit and increased the power handling to
the already robust motor structure.
Subwoofer Anatomy
SURROUND
Kevlar Fiber Paper
Polypropylene
SPIDER
Wire Cooling Vents
FRAME STRUCTURE
Cooling Vents
Die-Cast Aluminum
Single Spider
Stamped Steel
VOICE COIL
MOTOR STRUCTURE
PEAK
POWER
SPL 137 dB
utilizing dual P3 12” subwoofers in a
X-MAX
LINEAR EXCURSION
RMS Power
Handling
Peak Power
Handling
Nominal
Impedance
Sealed
Enclosure
Ported
Enclosure
Sensitivity
Mounting
Depth
P3D2-10/P3D4-10
500 WATTS
1000 WATTS
DUAL 2Ω or 4Ω
0.59 CU. FT.
1.40 CU. FT. PORT: (1) 4”x14”
82dB
6.20”
P3D2-12/P3D4-12
600 WATTS
1200 WATTS
DUAL 2Ω or 4Ω
1.02 CU. FT.
1.79 CU. FT. PORT: (1) 4”x10”
85dB
6.70”
P3D2-15/P3D4-15
600 WATTS
1200 WATTS
DUAL 2Ω or 4Ω
1.58 CU. FT.
2.66 CU. FT. PORT: (1) 4”x10”
86dB
7.60”
PUNCH P3 SHALLOW SUBWOOFERS
P3SD2-12
3.6”
The NEW Rockford P3 Shallow subwoofers deliver the PUNCH even in
mounting depth limited applications. These shallow subwoofers feature
the same VAST and Flex Fit technologies you’ll find in our other PUNCH
subs. In the past if a vehicle didn’t have an excess of free space, it meant
no bass. Times have changed, now even depth challenged vehicles can
have REAL bass.
NEW
Subwoofer Anatomy
SHALLOW
SURROUND
Kevlar Fiber Paper
Polypropylene
SPIDER
FRAME STRUCTURE
Dual Laminated w/ Embedded
Lead Wire Cooling Vents
Die-Cast Aluminum
Cooling Vents
Stamped Steel
Single Spider
MOTOR STRUCTURE
VOICE COIL
TM
TM
TM
PEAK
POWER
SPL 133 dB
utilizing dual P3S 12” subwoofers in a
X-MAX
LINEAR EXCURSION
RMS Power
Handling
Peak Power
Handling
Nominal
Impedance
Sealed
Enclosure
Ported
Enclosure
Sensitivity
Mounting
Depth
P3SD2-8/P3SD4-8
150 WATTS
300 WATTS
DUAL 2Ω or 4Ω
0.25 CU. FT.
0.75 CU. FT. PORT: (1) 3”x9”
82dB
2.7”
P3SD2-10/P3SD4-10
300 WATTS
600 WATTS
DUAL 2Ω or 4Ω
0.50 CU. FT.
1.00 CU. FT. PORT: (1) 4”x12”
83dB
3.5”
P3SD2-12/P3SD4-12
400 WATTS
800 WATTS
DUAL 2Ω or 4Ω
1.00 CU. FT.
1.25 CU. FT. PORT: (1) 4”x12”
85dB
3.7”
PUNCH P2 SUBWOOFERS
P2D4-12
Like the new P3, VAST is utilized for increased cone
area and features a StampCast basket with Flex Fit. The
new P2 subwoofers have a 38% increase in power handling.
We incorporated a Kevlar fiber reinforced cone to keep P2 at a
high performance, yet affordable price point.
Subwoofer Anatomy
SURROUND
Kevlar Fiber Paper
Polypropylene
SPIDER
FRAME STRUCTURE
Wire Cooling Vents
Cooling Vents
Die-Cast Aluminum
Single Spider
Stamped Steel
VOICE COIL
MOTOR STRUCTURE
PEAK
POWER
SPL 135 dB
X-MAX
LINEAR EXCURSION
RMS Power
Handling
Peak Power
Handling
Nominal
Impedance
Sealed
Enclosure
Ported
Enclosure
Sensitivity
Mounting
Depth
P2D2-8/P2D4-8
250 WATTS
500 WATTS
DUAL 2Ω or 4Ω
0.23 CU. FT.
0.65 CU. FT. PORT: (1) 2”x8”
83dB
4.80”
P2D2-10/P2D4-10
300 WATTS
600 WATTS
DUAL 2Ω or 4Ω
0.59 CU. FT.
1.40 CU. FT. PORT: (1) 4”x14”
84dB
5.90”
P2D2-12/P2D4-12
400 WATTS
800 WATTS
DUAL 2Ω or 4Ω
1.02 CU. FT.
1.79 CU. FT. PORT: (1) 4”x10”
86dB
6.40”
P2D2-15/P2D4-15
400 WATTS
800 WATTS
DUAL 2Ω or 4Ω
1.58 CU. FT.
2.66 CU. FT. PORT: (1) 4”x10”
86dB
7.30”
PUNCH P1 SUBWOOFERS
P1S4-12
The new P1 features a Kevlar fiber reinforced
cone, StampCast basket with Flex Fit and
increased power handling over its predecessor. All
this added to the already reliable performance.
Subwoofer Anatomy
SURROUND
Kevlar Fiber Paper
Polypropylene
SPIDER
FRAME STRUCTURE
Wire Cooling Vents
Die-Cast Aluminum
Single w/ Stitched Lead Wire
and Cooling Vents
Stamped Steel
Single Spider
MOTOR STRUCTURE
VOICE COIL
PEAK
POWER
SPL 133 dB
X-MAX
LINEAR EXCURSION
RMS Power
Handling
Peak Power
Handling
Nominal
Impedance
Sealed
Enclosure
Ported
Enclosure
Sensitivity
Mounting
Depth
P1S2-8/P1S4-8
200 WATTS
400 WATTS
SINGLE 4Ω or 8Ω
0.23 CU. FT.
0.65 CU. FT. PORT: (1) 2”x6”
83.5dB
4.40”
P1S2-10/P1S4-10
250 WATTS
500 WATTS
SINGLE 4Ω or 8Ω
0.59 CU. FT.
1.40 CU. FT. PORT: (1) 3”x8”
85dB
5.30”
P1S2-12/P1S4-12
250 WATTS
500 WATTS
SINGLE 4Ω or 8Ω
1.02 CU. FT.
1.79 CU. FT. PORT: (1) 3”x6”
86dB
6.00”
P1S2-15/P1S4-15
250 WATTS
500 WATTS
SINGLE 4Ω or 8Ω
1.58 CU. FT.
2.66 CU. FT. PORT: (1) 4”x8”
87.5dB
7.00”
PUNCH LOADED
P2-2X12
Rockford Fosgate PUNCH LOADED enclosures
are designed for one purpose, deliver maximum
performance tuned EXACTLY for our PUNCH
subwoofers.
• LEAP (Loudspeaker Enclosure Analysis Program) is
utilized to determine the optimum port tuning for each
subwoofer/enclosure model
• High-Flow, Low-Noise Port Design
• Constructed with 5/8” MDF
• 10 AWG Input Terminals
• Lowest wired impedance (P3 & P2 at 1Ω,
P1 at 4 & 2 Ω)
Enclosures AVAILABLE For all 10”or 12” Punch Subwoofers
P3-1X10
P3-2X10
P3-1X12
P3-2X12
P2-1X10
P2-2X10
P2-1X12
P2-2X12
P1-1X10
P1-2X10
P1-1X12
P1-2X12
P3S-1X12
P3S-1X10
P3S-1X8
5.3”
3.3”
Enclosures AVAILABLE
For All Punch Shallow Subwoofers
SHALLOW
P3S-1X8
P3S-1X10
P3S-1X12
PUNCH POWERED LOADED
P300-12
Punch Powered Loaded enclosures are the quick and
easy to install bass solution to upgrade your factory or
aftermarket stereo system.
•300 Watts RMS “closed loop design”
•Remote PLC (Punch Level Control)
included
•High and low level inputs
AVAILABLE in 10”or 12”
Powered Loaded Solutions
P300-10
P300-12
•Integrated grille included
•10”- 300W RMS/600W Peak
12”- 300W RMS/600W Peak
NEW
P300-12
Three different automatic turn on modes;
REM (+12V), DC Offset, and Audio Signal.
With removable power and signal connectors
quick connection and disconnection of the
Punch bass solution can be made.
PRIME R2 SUBWOOFERS
R2D4-12
Optimized for sealed and vented enclosures,
the new R2 subwoofers are the perfect
match to Prime amplifiers.
Subwoofer Anatomy
SURROUND
Kevlar Fiber Paper
Polypropylene
SPIDER
FRAME STRUCTURE
Wire Cooling Vents
Cooling Vents
Die-Cast Aluminum
Single Spider
Stamped Steel
VOICE COIL
MOTOR STRUCTURE
PEAK
POWER
SPL 132 dB
utilizing dual R2 12” subwoofers in a
X-MAX
LINEAR EXCURSION
RMS Power
Handling
Peak Power
Handling
Nominal
Impedance
Sealed
Enclosure
R2D2-10/R2D4-10
250 WATTS
500 WATTS
DUAL 2Ω or 4Ω
0.59 CU. FT.
R2D2-12/R2D4-12
250 WATTS
500 WATTS
DUAL 2Ω or 4Ω
1.02 CU. FT.
Ported
Enclosure
Sensitivity
Mounting
Depth
1.40 CU. FT. PORT: (1) 4”x13”
89dB
4.30”
1.79 CU. FT. PORT: (1) 4”x9.3”
87dB
5.10”
PRIME SHALLOW SUBWOOFERS
R2SD4-12
3.6”
When you need a shallow
subwoofer at a value price, the
R2 Shallow is the solution.
Enclosures AVAILABLE
For All Prime Shallow Subwoofers
R2S-1X10
R2S-1X12
Subwoofer Anatomy
SHALLOW
SURROUND
Kevlar Fiber Paper
Polypropylene
SPIDER
FRAME STRUCTURE
Wire Cooling Vents
Die-Cast Aluminum
Cooling Vents
Stamped Steel
Single Spider
VOICE COIL
MOTOR STRUCTURE
PEAK
POWER
SPL 130 dB
utilizing dual R2S 12” subwoofers in a
X-MAX
LINEAR EXCURSION
RMS Power
Handling
Peak Power
Handling
Nominal
Impedance
Sealed
Enclosure
Ported
Enclosure
Sensitivity
Mounting
Depth
R2SD2-10/R2SD4-10
200 WATTS
400 WATTS
DUAL 2Ω or 4Ω
0.70 CU. FT.
1.40 CU. FT. PORT: (1) 4”x13.70”
83dB
3.40”
R2SD2-12/R2SD4-12
250 WATTS
500 WATTS
DUAL 2Ω or 4Ω
0.90 CU. FT.
1.79 CU. FT. PORT: (1) 4”x11.80”
85dB
3.60”
PRIME R1 SUBWOOFERS/ENCLOSURES
R1S412
Rockford Fosgate PRIME subwoofers are the perfect first
step into performance audio. These purebred Rockford
woofers offer a value the competition just can’t match.
When you combine the 2” voice coils and 150 watt power
handling with a Prime amplifier, this system will always get
it done. You’ve always wanted a Rockford system, now you
can.
Enclosures AVAILABLE For
10”or 12” Prime R1 Subwoofers
R1S410
R1S412
Subwoofer Anatomy
SURROUND
Kevlar Fiber Paper
Polypropylene
R300-12
SPIDER
FRAME STRUCTURE
Wire Cooling Ventsw
Die-Cast Aluminum
Cooling Vents
Stamped Steel
Single Spider
VOICE COIL
MOTOR STRUCTURE
PEAK
POWER
SPL 129 dB
utilizing dual R1 12” subwoofers in a
X-MAX
LINEAR EXCURSION
RMS Power
Handling
Peak Power
Handling
Nominal
Impedance
Sealed
Enclosure
Ported
Enclosure
Sensitivity
Mounting
Depth
R1S410
150 WATTS
300 WATTS
SINGLE 4Ω
0.75 CU. FT.
N/A
86dB
4.60”
R1S412
150 WATTS
300 WATTS
SINGLE 4Ω
1.02 CU. FT.
N/A
87dB
5.00”
SPEAKERS
SPEAKER INTO
(NEED PHOTOS)
PUSH THE ENVELOPE
Once you hear them you’ll know.
Power loudspeakers will transform
your ride into a sonic experience
so accurate and clear you might
not want to get out of your car.
THE STANDARD
SPEAKER INTO
(NEED PHOTOS)
Don’t just listen to your music, feel
it. Packed with features, just like
its older brother POWER, PUNCH
loudspeakers are for those who
like it raw and loud.
THROW DOWN
PRIME loudspeakers are a
perfect factory replacement for
any vehicle. Rockford DNA
throughout, PRIME loudspeakers
get it done.
SPEAKERS
Rockford’s proprietary surround technique, VAST,
flex fit
RF link
Rockford’s proprietary RF Link is a bus-power
component connection system enabling integration
and control of all RF Link equipped products. The use
of this systems allows for the expansion of auxiliary
controls and managed system turn on.
63 2012 BUYERS GUIDE SPEAKER TECHNOLOGIES
Discreet Dual Clamp
Rockford’s proprietary tweeter mounting design
provides concentric clamping pressure around the
perimeter of the mounting hole, utilizing a single center
screw. This applies balanced pressure to both faces of
the mounting surface. From there, the tweeter simply
snaps into place and is finished with a snap on trim
ring.
Inductive Damping Heat Sink
Secures directly to the top of magnet structure to
improve system efficiency by reducing both distortion
and back EMF (Electo-magnetic force). Also radiates
heat to reduce voice coil temperature.
Integrated Concealed Crossover
The Integrated Concealed Crossover hides the
crossover inside the basket, creating a cleaner look
and easier installation.
CEA-2031
Panel
POWER T5 SPEAKERS
T5652-S
Building on years of knowledge in acoustic engineering
Rockford Fosgate has delivered the new T5 Series components.
Industry leading in every way these speakers feature; Liquid
Crystal Polymer cones (LCP) for superior sound quality, solid
copper phase plugs, neodymium motors and die cast aluminum
frames. The T5 systems biggest benefit is derived from the
increase in cone area with Rockford’s patent pending VAST
(Vertical Attach Surround Technique) surround technology. The
crossover is a unique dual mono configuration that conveniently
lets adjustments be made from the driver’s seat. Available in
a 6.5” two-way component system these audiophile speakers
offer ultra high fidelity listening for all applications.
Remote Tuning Module
4
2
6
7
1
3
5
9
8
13
14
15
10
11
12
1
Remote Tuning Module
2
Mil-Spec Capacitors
3
Foil wound multi-Tap Inductors
4
Air-Core Inductors
5
RF Link
6
Tri-laminate WOVEN Liquid Crystal
Polymer FIBER™ Cone w/ VAST™
7
MACHINED COPPER PHASE PLUG
8
DIE-CAST ALUMINUM W/ FLEX FIT™
9
3-Way Connection Terminal
10
Dual Focused Field Magnet
Structure
11
Neodymium Motor W/ IDHS™
12
Cast aluminum trim bezel W/ DDC™
13
Liquid Crystal Polymer Fiber™
Tweeter Dome
14
Copper Phase Plug
15
Tuning Chamber
10
96
11
OUT
OF
100
Frequency
Response Range
Accuracy Score
Accuracy score is derived from calculating the
magnitude deviations from the T5 6.5” component
speaker frequency response against a reference
flat magnitude response.
T5652-S
PEAK
POWER
Speaker Size
Tweeter Size
RMS Power Handling
Peak Power Handling
Frequency Response
Mounting Depth
6.5”
1”
150 WATTS
300 WATTS
45Hz-40kHz
2.48”
POWER T3 SPEAKERS
T3652-S
When Rockford Fosgate set out to design the T3 component we had 2 goals in mind – Outstanding
audio performance and high power handling. The combination of an ultra strong die cast basket and
the LCPF Cone results in a very high strength driver that is resistant to temperature changes and
exhibits outstanding tonal accuracy because the LCPF has excellent damping characteristics to resist
vibration. In order to achieve greater power handling, better efficiency, and to avoid distortion the
crossover network is built with Air-Core Inductors and 5% tolerance capacitors. Finally, the T3 can be
installed easily in most vehicles because of the flex-fit basket, the on/off axis switch, and the flexible
tweeter attenuation. Audition this component set and you’ll hear that the T3 more than exceeds
expectations.
5
6
1
7
4
3
2
11
8
9
10
1
Air-Cone Inductors
2
Tweeter Attenuation (+2dB,
0dB, -2dB)
3
On/off axis switch
4
bi-amp capable
5
5% tolerance capacitors
6
woven liquid crystal polymer fiber™ cone w/ vast™
7
Die-Cast aluminum w/ flex
fit™
8
3-way connection terminal
9
Neodymium Motor W/ IDHS™
10
brushed/polished aluminum trim bezel w/ ddc™
11
liquid crystal polymer
fiber™ dome
9
91
OUT
OF
100
Frequency
Response Range
Accuracy Score
T3652-S
PEAK
POWER
Speaker Size
Tweeter Size
RMS Power Handling
Peak Power Handling
Frequency Response
Mounting Depth
6.5”
1”
125 WATTS
250 WATTS
48Hz-24kHz
2.48”
POWER T2 SPEAKERS
T2652-S
POWER loudspeakers will transform your ride into a sonic experience so
accurate and clear you might not want to get out of your car. From our
billet machined aluminum phase plug, to our audiophile grade component
crossover, POWER loudspeakers’ superior performance compliments the
audiophile in all of us. Factor in patented VAST technology that increases
cone area and you’ve got the ability to out perform others with so called
same size speakers.
5
6
7
1
8
4
9
3
2
10
12
11
1
Air-Cone Inductors
2
Tweeter Attenuation (+2dB, 0dB,
-2dB)
3
On/off axis switch
4
bi-amp capable
5
6
injection Molded polypropylene
carbon fiber blend cone w/ vast™
7
machined aluminum phase
plug
8
Die-Cast aluminum w/ flex fit™
9
unified Tab
10
Ferrite motor structure
85
11
polished/brushed aluminum trim
bezel w/ ddc™
12
aluminum dome
OUT
OF
100
Frequency
Response Range
Accuracy Score
PEAK
POWER
Speaker Size
Tweeter Size
RMS Power Handling
Peak Power Handling
Frequency Response
Mounting Depth
T252-S
5.25”
1”
75 WATTS
150 WATTS
65Hz-22kHz
1.97”
T2652-S
6.5”
1”
100 WATTS
200 WATTS
50Hz-22kHz
2.48”
T2T-S
N/A
1”
100 WATTS
200 WATTS
3kHz-22kHz
0.91”*
*Flush Mount
POWER T1 SPEAKERS
T1675-S
Whether you’re looking for a coaxial
solution or a true component system,
POWER series T1 has a speaker for you. T1
speakers feature patented VAST technology
that increases cone area for improved output.
The cantilever mounted tweeter on the coaxial
improve sound quality and the Flex Fit basket on
both coaxial and components make the installation
seamless. Factor in the poly-carbon blend cone and the
POWER series T1 speakers deliver an audiophile performance
in your vehicle.
82
OUT
OF
100
Accuracy Score
T1675
Frequency
Response Range
PEAK
POWER
5
6
1
7
4
3
2
8
11
9
10
Air-Cone Inductors
2
Tweeter Attenuation (+2dB,
0dB, -2dB)
3
On/off axis switch
4
bi-amp capable
5
6
injection Molded polypropylene
carbon fiber blend cone w/ vast™
7
StampCast™ w/ flex fit™
8
unified Tab
9
Ferrite motor structure
10
brushed/polished aluminum trim bezel w/ ddc™
11
NEW NEW NEW
NEW NEW NEW
1
Treated Fabric Dome
Speaker Size
Tweeter Size
RMS Power Handling
Peak Power Handling
Frequency Response
Mounting Depth
T152-S
5.25”
1”
75 WATTS
150 WATTS
65Hz-22kHz
1.97”
T16-S
6.0”
1”
TBD
TBD
TBD
TBD
T165-S
6.5”
1”
TBD
TBD
TBD
TBD
T1675-S
6.75”
1”
100 WATTS
200 WATTS
50Hz-22kHz
2.48”
T1T-S
N/A
1”
100 WATTS
200 WATTS
3kHz-22kHz
*0.91”
T142
4.0”
0.75”
40 WATTS
80 WATTS
85Hz-22kHz
1.77”
T152
5.25”
1”
60 WATTS
120 WATTS
65Hz-22kHz
1.97”
T16
6.0”
1”
70 WATTS
140 WATTS
65Hz-22kHz
1.93”
T165
6.5”
1”
70 WATTS
140 WATTS
65Hz-22kHz
1.93”
T1675
6.75”
1”
75 WATTS
150 WATTS
50Hz-22kHz
2.48”
T1462
4”x6”
0.75”
45 WATTS
90 WATTS
75Hz-22kHz
1.97”
T1572
5”x7”
1”
70 WATTS
140 WATTS
60Hz-22kHz
2.28”
T1682
6”x8”
1”
80 WATTS
160 WATTS
55Hz-22kHz
2.56”
T1692
6”x9”
1”
100 WATTS
200 WATTS
50Hz-22kHz
3.39”
T1693
6”x9”
1”
100 WATTS
200 WATTS
50Hz-22kHz
3.39”
*Flush Mount
PUNCH P1 SPEAKERS
P1675-S
PUNCH loudspeakers are for those who
like it raw and loud. Our patented VAST
feature delivers more volume and deeper
bass response while our PEI dome tweeter
and injection molded cone keep the vocals
ultra clear. Designed as a drop in replacement for
your factory speakers, we make sure the installation is
seamless. Our multi-OEM plate and flex fit basket ensure a
proper fit into your ride. While our power handling lets you pull
the power you’re craving. Don’t just listen to your music, feel it.
79
OUT
OF
100
Accuracy Score
magnitude deviations from the P1 6.5” component
P1675
Frequency
Response Range
PEAK
POWER
2
3
1
7
4
5
6
12 dB/OCT Integrated conceal
crossover (ICC)
2
injection molded mineral filled
polypropylene coNe w/ Vast™
3
STampcast™ w/ flex fit
4
unified tab
5
ferrite motor structure
6
Stealth bezel trim ring w/
DDC™ vast™
7
plated polyether imide (PEI)
Dome
NEW NEW NEW
NEW NEW NEW
1
Speaker Size
Tweeter Size
RMS Power Handling
Peak Power Handling
Frequency Response
Mounting Depth
P152-S
5.25”
1”
50 WATTS
100 WATTS
70Hz-22kHz
1.87”
P16-S
6.0”
1”
TBD
TBD
TBD
TBD
P165-S
6.5”
1”
TBD
TBD
TBD
TBD
P1675-S
6.75”
1”
60 WATTS
120 WATTS
60Hz-22kHz
2.17”
P1T-S
N/A
1”
60 WATTS
120 WATTS
3.5kHz-22kHz
*0.91”
P132
3.5”
0.5”
20 WATTS
40 WATTS
120Hz-22kHz
1.38”
P142
4”
0.75”
30 WATTS
60 WATTS
100Hz-22kHz
1.69”
P152
5.25”
0.75”
40 WATTS
80 WATTS
70Hz-22kHz
1.87”
6”
0.75”
55 WATTS
110 WATTS
65Hz-22kHz
1.89”
P165
6.5”
0.75”
55 WATTS
110 WATTS
65Hz-22kHz
1.89”
P1675
6.75”
0.75”
60 WATTS
120 WATTS
60Hz-24kHz
2.17”
P1462
4”x6”
0.75”
35 WATTS
70 WATTS
90Hz-22kHz
1.81”
P1572
5”x7”
0.75”
60 WATTS
120 WATTS
75Hz-22kHz
2.20”
P1683
6”x8”
0.75”
65 WATTS
130 WATTS
65Hz-24kHz
2.28”
P1692
6”x9”
0.75”
75 WATTS
150 WATTS
60Hz-22kHz
3.07”
P1694
6”x9”
0.75”
75 WATTS
150 WATTS
60Hz-24kHz
3.07”
P16
*Flush Mount
PRIME R1 SPEAKERS
R1675-S
Sick of that factory paper cone
speaker vibrating your door panel
loose? We thought so; we’ve designed
PRIME loudspeakers to be a no-compromise
factory replacement speaker that delivers
authentic Rockford sound at a PRIME price point.
The ultra lightweight poly cone and dome tweeter
make the PRIME drivers efficient enough to hook up
directly to your factory head-unit. If you want to kick it up,
add a PRIME four channel R300-4 amplifier.
PRIME loudspeakers are a perfect fit for any vehicle.
73
OUT
OF
100
Accuracy Score
magnitude deviations from the R1 6.5” component
R165
Frequency
Response Range
PEAK
POWER
2
3
1
6
4
5
Integrated high pass
crossover
2
Mica injected polypropylene
cone
3
18 AWG Stamped Steel basket
4
Standard Spade
5
ferrite motor structure
6
Vacuum Formed Polypropylene
Cone
NEW NEW NEW
1
Speaker Size
Tweeter Size
RMS Power Handling
Peak Power Handling
Frequency Response
Mounting Depth
R152-S
5.25”
1”
40 WATTS
80 WATTS
58Hz-20kHz
1.91”
R16-S
6.0”
1”
40 WATTS
80 WATTS
60Hz-20kHz
1.97”
R165-S
6.5”
1”
40 WATTS
80 WATTS
60Hz-20kHz
1.97”
R1675-S
6.75”
1”
40 WATTS
80 WATTS
55Hz-20kHz
2.00”
R1T-S
N/A
1”
40 WATTS
80 WATTS
2.5kHz-22kHz
*0.76”
R142
4”
0.5”
25 WATTS
50 WATTS
100Hz-22kHz
1.64”
R152
5.25”
0.5”
35 WATTS
70 WATTS
53Hz-22kHz
1.91”
6”
0.5”
40 WATTS
80 WATTS
48Hz-22kHz
1.97”
R165
6.5”
0.5”
40 WATTS
80 WATTS
48Hz-22kHz
1.97”
R1675
6.75”
0.5”
40 WATTS
80 WATTS
48Hz-22kHz
2.00”
R1682
6”x8”
0.5”
50 WATTS
100 WATTS
57Hz-22kHz
2.54”
R1693
6”x9”
0.5”
60 WATTS
120 WATTS
48Hz-22kHz
2.65”
R1694
6”x9”
0.5”
60 WATTS
120 WATTS
48Hz-22kHz
2.85”
NEW NEW NEW
R16
PUNCH PRO MIDS/TWEETERS
HIGH OUTPUT
EXTREME LEVELS OF MID TO HIGH RANGE WILL BE EXPERIENCED
SCENARIOS TO CONSIDER WHEN USING
THIS PRODUCT:
A superior sensitivity yields low power (Watts)
requirements.
Their unique structure gives opportunity to an equally
unique fitment.
It is HIGHLY encouraged to incorporate a generous quantity
of this product in one application for a preferred outcome.
PPS4-8
1
2
3
4
5
1
Stamped Steel Grille
2
Reinforced Paper w/ aluminum
phase plug
4
16 Ga. Compression style
5
Ferrite Motor structure
3
STampcast™ w/ flex fit
To all the Rockford Fosgate Fanatics we would like to introduce the speakers to accompany your two
strapped T2500-1bdCP pushing (4) T2 15’s…the Punch Pro speakers are guaranteed to provide HIGH
OUTPUT full range for extreme SQL (Sound Quantity Level) systems.
NEW
PP4-T
1
2
4
3
5
1
Horn tweeter design w/
aluminum phase plug
2
DIE-CAST ALUMINUM W/ FLEX FIT™
4
Integrated high pass
crossover
5
Ferrite Motor structure
3
16 Ga. Compression style
Speaker Size
RMS Power Handling
Peak Power Handling
Frequency Response
Mounting Depth
*PPS4-6
6.5”
100 WATTS
200 WATTS
85Hz-5kHz
2.24”
*PPS8-6
6.5”
100 WATTS
200 WATTS
87Hz-5kHz
2.24”
*PPS4-8
8.0”
125 WATTS
250 WATTS
80Hz-5kHz
2.91”
*PPS8-8
8.0”
125 WATTS
250 WATTS
82Hz-5kHz
2.91”
*PP4-T
1.5”
50 WATTS
100 WATTS
3kHz-20kHz
2.59”
*PP8-T
1.5”
50 WATTS
100 WATTS
3kHz-20kHz
2.59”
*SOLD IN SINGLE DRIVERS ONLY
MARINE
A
M
P
L
I
F
I
E
R
S
CRANK IT UP
Time to crank up the tunes and hit
the water. Bring your system to life
with the new Marine amplifiers.
SUBWOOFERS
MAKE WAVES
Take the huge bass from the parking
lot to the water! Four 12” subs in the
hull or a single 10” in a storage
compartment, M2 subwoofers are
ready for any installation.
SPEAKERS
OVER COME THE ELEMENTS
With the M2 full range speakers
mounted in your tower you’ll be
rockin’ the latest single not the
drone of a motor.
S O U R C E
FULL FUNCTION
U N I T S
Whether you brought your favorite
MP3, CD, or mobile device to the
lake, plug-in and jam out!
MaRINE
M2 MARINE GRADE
Rockford’s M2 marine grade standard takes into account
the devastating effects of the outdoor environment and
takes extreme measures to ensure optimum performance.
MA R INE G R ADE
• 100% UV stable CENTREX® injection molded plastic
• Corrosion resistant gold plated polarized terminals
• Injection molded polypropylene cone with UV inhibitors
• Internal full magnetic shielding
• Stainless steel grilles and mounting hardware
• UV and salt fog resistant thermo-plastic elastomer
surround
ASTM B117 – Salt/Fog &
D4329 – UV Test Standards
ASTM B117 salt/fog test standard provides accelerated
aging in a controlled corrosive environment to produce
relative corrosion resistance information for specimens
of metals and coated metals.
ASTM D4329 test standard is intended to induce
property changes associated with end-use conditions,
including the effects of sunlight, moisture, and heat.
CEA-2031
CEA-2006
Power ratings on Rockford Fosgate amplifiers conform
to CEA-2006 industry standards. These guidelines
mean your amplifier’s output power ratings are REAL
POWER numbers, not inflated marketing ratings.
81 2012 BUYERS GUIDE MARINE TECHNOLOGIES
Rockford’s proprietary surround technique,VAST,
flex fit
Integrated Concealed Crossover
The Integrated Concealed Crossover hides the
crossover inside the basket, creating a cleaner look
and easier installation.
MARINE AMPLIFIERS
M750-1D
Time to crank up the tunes and hit the water. Bring
your system to life with the new Marine amplifiers. We
have taken the current consumption friendly PRIME
Full Range Class D amplifiers and outfitted them with
innovative armor to provide protection from the harshest
environments. Go ahead turn it up!
NEW
M750-1D
Differential
RCA Inputs
4 AWG Set-Screw Connectors
RMS POWER RANGE
Rated Power
137
GRAMS
WATTS
400-1200
AVERAGE EFFICIENCY
85.1 %
Frequency
Response
THD+N@
Rated Power
Input
Sensitivity
S/N
Ratio
Channel
Separation
Dimensions
M400-4D
75x4 @ 4 OHMS
100x4 @ 2 OHMS
20Hz-20kHz
<0.1%
150MV - 5V
>90dB
>50dB
H 2.00” x W 6.80” x L 9.10”
M600-4D
100x4 @ 4 OHMS
150x4 @ 2 OHMS
20Hz-20kHz
<0.1%
150MV - 5V
>90dB
>50dB
H 2.00” x W 6.80” x L 11.10”
M750-1D
250x1 @ 4 OHMS
500x1 @ 2 OHMS
750x1 @ 1 OHM
20Hz-250kHz
<0.8%
150MV - 5V
>100dB
N/A
H 2.00” x W 6.80” x L 9.10”
M1200-1D
400x1 @ 4 OHMS
800x1 @ 2 OHMS
1200x1 @ 1 OHM
20Hz-250kHz
<0.8%
150MV - 5V
>100dB
N/A
H 2.00” x W 6.80” x L 11.10”
MARINE SUBWOOFERS
M212S4
Available in Black (M212S4B)
Ready to idle your party barge into the cove and serve notice that you’ve arrived? With both
10” & 12” sizes available, M2 subs prove that it doesn’t take haulin’ on the open lake to
create the biggest wake! The M2 oversized 8” full range speakers mount perfectly on a wide
range of towers to keep you smiling on the short line. However you choose to spend your day
on the water, you’ll own it with M2 Marine products.
Subwoofer Anatomy
increased output. By combing quality materials with Rockford proprietary speaker technologies in our
SURROUND
*Injection Molded Polypropylene w/ UV Inhibitors
SPIDER
FRAME STRUCTURE
*Centrex™ w/ FlexFit™
Wire Cooling Vents
Cooling Vents
Single Spider
MOTOR STRUCTURE
VOICE COIL
TM
TM
TM
*With M2 Marine Grade products there is no substitution for materials that will withstand the harshest of environments.
MA R INE G R ADE
100% UV stable CENTREX® injection
molded plastic w/ NomexTM collar
Stainless steel grilles and
mounting hardware
Corrosion resistant gold plated
polarized terminals
RMS Power
Handling
Peak Power
Handling
Nominal
Impedance
Sealed
Enclsoure
*Ported
Enclosure
Sensitivity
Mounting
Depth
M210S4/M210S4B
250 WATTS
500 WATTS
SINGLE 4Ω
0.75 CU. FT.
1.25 CU. FT. or PORT: (1) 4”x8.52”
86dB
5.54”
M212S4/M212S4B
300 WATTS
600 WATTS
SINGLE 4Ω
1.00 CU. FT.
1.50 CU. FT. or PORT: (1) 3”x5.74”
87dB
6.58”
*Infinite Baffle Compatible
MARINE SPEAKERS
M262
Available in Black (M262B)
Ready to idle your party barge into the cove and serve notice that you’ve arrived? With both
10” & 12” sizes available, M2 subs prove that it doesn’t take haulin’ on the open lake to
create the biggest wake! The M2 oversized 8” full range speakers mount perfectly on a wide
range of towers to keep you smiling on the short line. However you choose to spend your day
on the water, you’ll own it with M2 Marine products.
M262
1
3
2
4
1
Stainless Steel Grille
4
CENTREX™ FRAME
2
12 dB/ OCT INTEGRATED
CONCEALED CROSSOVER (ICC)
3
Bridge MOunted Component
Tweeter
MA R INE G R ADE
100% UV stable CENTREX® injection
molded plastic w/ NomexTM collar
polarized terminals
Stainless steel grilles and
mounting hardware
Speaker Size
Tweeter Size
RMS Power Handling
Peak Power Handling
Frequency Response
Mounting Depth
M262/M262B
6.5”
1”
75 WATTS
150 WATTS
53Hz-22kHz
2.80”
M282/M282B
8”
1”
100 WATTS
200 WATTS
48Hz-22kHz
3.42”
COMING SOON Available in Wakeboard Tower Enclosure
MARINE SOURCE UNITS
RFX9700CD
Stainless Steel Chassis
SD Card READER
Water Resistant faceplate
Every boat should have great rockin’ tunes, and now you can
with Rockford Fosgate RF Marine source units. Designed to
weather the harsh marine environment, RF Marine source units
let you bring your tunes on the water, so crank up your favorite
music and make time away from the dock even more enjoyable.
Thin PRofile Mounting
Capacitive Touch Control Panel
RFXMR5BB
RFXMR3
RFXMR6
RFXMR7
Description
Features
Dimensions
Flip down AM/FM Stereo CD Player 40 watts x 4
AM/FM Tuner, Disc Player, MP3, Sirius
Ready, iPod Support, USB Input, SD card
DIN size chassis with 1.5 DIN face
Hide-away box w/ AM/FM Stereo for RFXMR5BB
50 watts x 4
AM/FM Tuner, Sirius Ready, iPod Support,
USB Input, AUX Input, Video In/Out, Dual
Zone, Disc Changer Ready
H 2.50” x W 6.875” x L 8.375”
RFXMR5BB
Waterproof wired remote w/ digital display for
RFX3000
3-Line LCD Display, Full Function Control
H 3.90” x W 6.70” x D 0.70”
RFXMR3
RFX3000 & RFX9700CD
LCD Display, Full Function Control
RFXMR6
Waterproof wired remote for RFX3000 &
RFX9700CD
Full Function Control
RFXMR7
RFX3000 & RFX9700CD
Capactive Touch LCD Display, Full
Function Control
RFX9700CD
RFX3000
Overall Diameter 3.5” (90mm)
(Mounting Diameter 3” (76mm), Depth 1.1” (29mm))
(Mounting Diameter 2.2” (55mm), Depth .5” (12.5mm))
(Mounting Diameter 3” (76mm), Depth 1.1” (29mm))
RFX10
10 foot extension cable for RFXMR3, RFXMR6,
RFXMR5BB, RFXMR7
10 FT
RFX16
16 foot extension cable for RFXMR3 or RFXMR6
16 FT
RFX30
USB and 3.5mm input socket for use with
RFX3000
(Mounting Diameter 1.5” (37mm), Depth 1.1” (28mm))
Overall Diameter 2” (49mm) w/ 6 FT cable
ACCESSORIES
INTERCONNECTS
PURE SIGNAL
Rockford’s twisted and dual
twisted oxygen free copper
interconnects ensure that the best
possible audio signal is supplied
to any audio system.
02 FREE
TWISTED
1/0-8AWG
PLATINUM
Copper
Pair Design
SPLIT TIP
Center Pin
MULTI-CUT
Grounding Ring
DISTRIBUTION
POWER HUB
Manufactured exclusively with 100%
solid brass, Rockford Fosgate
distribution accessories provide high
current/low resistance connection.
Reducers
Plated
POWER WIRE
THE LIFE LINE
Rockford Fosgate power wire
meets and exceeds the American
Wire Gauge standard guaranteeing
that your amplifier won’t be starved
for current.
02 FREE
Copper
AWG
American Wire Gauge
MARINE
Grade (BC-5W2)
C A PA C I T O R S
BRING THE POWER
Your vehicle’s electrical system
was designed to operate the way
it rolled off the showroom floor,
NOT with the 1000+ watt audio
system you just added. Rockford
capacitors are designed to help
stabilize the additional demand
from your upgraded system.
LOW ESR
DIGITAL
Display
HYBRID
Carbon/Electrolytic
EXTREME
Flexibility Jacket
ACCESSORIES
Exceeding the STANDARD
The American Wire Gauge standard was developed to rationalize selecting wire for a particular
purpose. In an electronic environment wire size can have a significant impact on performance.
Rockford Fosgate products are designed and engineered to perform at a superior level. It is only
fitting that the accessories linking them together perform with same expectation.
The American Wire Gauge Standard
The American Wire Gauge standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge.
Rockford Fosgate accessories are all designed and engineered in accordance with the AWG specification.
Anatomy of Wire
The construction of wire is broken out into three elements, strands, clusters and bundles. Varying these combinations will directly
change the wire gauge and significantly effect the flexibility of the wire.
93 2012 BUYERS GUIDE ACCESSORY TECHNOLOGIES
Wire Size Impacts System Performance
The smaller the wire gauge (copper content) the greater the resistance which results in a loss in power to your
amplifier(s) and speaker(s), thus creating a poor performing audio system!
rockfordfosgate.com
Don’t forget to use our Amp Wire Calculator to optimize
output with properly sized wire.
Engineered to Rock PROGRAM
We want you to get the maximum performance and reliability
from your Rockford Fosgate amplifier. We’re so certain using the
right cables make a difference, that we’ll give you an additional
1-Year amplifier warranty when using a matching installation kit!
for additional information regarding
our Engineered to rock program please
visIt us at rockfordfosgate.com
POWER KITS
1/0 AWG
4 AWG
8 AWG
10 AWG
RFK1D
RFK4I
RFK8I
RFK10I
RFK1D - Dual Amp Kit
RFK1 - Power Only Kit
RFK4D - Dual Amp Kit
RFK4X - Complete Kit
RFK4i - Power w/ Interconnect Kit
RFK8X - Complete Kit
RFK8i - Power w/Interconnect Kit
RFK10i - Power w/Interconnect Kit
INTERCONNECTS
Dual Twisted Pair
Coupler
Twisted Pair
RFIS
RFI-20
RFIT-20
• Available 3ft - 20ft Length
• Y-Adapters
• Available 3ft - 20ft Length
• Y-Adapters
• Couplers
DISTRIBUTION
Battery Post Adapters
Battery Clamps
RFDB1
Fuses
RFFU30
RFDGM
RFDGM - GM Battery Post
Adapter
RFDGML - GM Battery Post
Adapter for Double Stacked
Terminals
Fuse Holders
RFDB1 - 1/0 AWG +/- Battery Clamp
RFFANL
RFFanl - Inline ANL or MAXI Fuse Holder
RFFaGu - Inline AGU Fuse Holder
RFFMAXi - Inline MAXI Fuse Holder
RFFDaGu - Fused AGU Distribution Block
RFD1 - 1/0 AWG Distribution Block
RFD4 - 4 AWG Distribution Block
• ANL Style 500-100A
• MAXI Style 100-50A
• AGU Style 60-30A
Terminals
RFT1
• Set Screw - 1/0 AWG & 4 AWG
• Crimp - 1/0 AWG, 4AWG & 8 AWG
• Barrier Spades - 4 AWG & 8 AWG
POWER WIRE
1/0 AWG
4 AWG
RFW4R
8 AWG
RFW8B
Speaker Wire
RFWP12
RFW4B
RFW1R-51
• Red or Black
• 51ft Spool
• Red or Black
• 100ft Spool
• 12 AWG, 16 AWG, 18 AWG
• 250/1000 ft Spool or Packaged
• Red or Black
• 250ft Spool
CAPACITORS
Hybrid
Electrolytic
RFC10HB
RFC1
RFC10hB - 10 Farad Hybrid Digital Capacitor
RFC2D - 2 Farad Hybrid Digital Capacitor
RFC1D - 1 Farad Digital Capacitor
RFC1 - 1 Farad Capacitor
DEADSKIN
RFDS - Sound Damping Material 20’ square feet
RFDS
for additional Information on Accessories, please visIt rockfordfosgate.com
S/N Ratio
Channel
Separation
Dimensions
20Hz - 20kHz
<0.05%
150mV - 5V
>105dB
>50dB
H 2.14” x W 8.14” x
L11.41” (Small chassis)
T600-2
200x2 @ 4 ohms
300x2 @ 2 ohms
600x1 @ 4 ohms bridged
20Hz - 20kHz
<0.05%
150mV - 5V
>105dB
>50dB
H 2.14” x W 8.14” x
L13.66” (Medium chassis)
T400-4
60x4 @ 4 ohms
100x4 @ 2 ohms
20Hz - 20kHz
<0.05%
150mV - 5V
>105dB
>50dB
H 2.14” x W 8.14” x
T600-4
100x4 @ 4 ohms
150x4 @ 2 ohms
20Hz - 20kHz
<0.05%
150mV - 5V
>105dB
>50dB
H 2.14” x W 8.14” x
L14.91” (Large chassis)
150x4 @ 4 ohms
150x4 @ 2 ohms
200x4 @ 1 ohm
20Hz - 20kHz
<1.0%
150mV - 5V
>95dB
>50dB
T800-4ad
H 2.14” x W 8.14” x
Class ad w/ Constant
Power
20Hz - 20kHz
<1.0%
150mV - 5V
>95dB
>50dB
T1000-4ad
250x4 @ 4 ohms
250x4 @ 2 ohms
250x4 @ 1 ohm
H 2.14” x W 8.14” x
Class ad w/ Constant
Power and 4/2/1
T500-1bdCP
300x1 @ 4 ohms
500x1 @ 2 ohms
500x1 @ 1 ohm
20Hz - 250Hz
<0.5%
150mV - 5V
>100dB
N/A
H 2.14” x W 8.14” x
L11.41” (Small chassis)
T1000-1bdCP
700x1 @ 4 ohms
1000x1 @ 2 ohms
1000x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.14” x W 8.14” x
T1500-1bdCP
1000x1 @ 4 ohms
1500x1 @ 2 ohms
1500x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.14” x W 8.14” x
1500x1 @ 4 ohms
2500x1 @ 2 ohms
2500x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.14” x W 8.14” x
L21.9” (X-Large chassis)
P200-2
50x2 @ 4 ohms
100x2 @ 2 ohms
20Hz - 20kHz
<0.05%
150mV - 5V
>105dB
>50dB
H 2.2” x W 7.7” x L 8.9”
(Mini chassis)
P300-2
75x2 @ 4 ohms
150x2 @ 2 ohms
20Hz - 20kHz
<0.05%
150mV - 5V
>105dB
>50dB
H 2.2” x W 7.7” x L 8.9”
(Mini chassis)
P400-2
100x2 @ 4 ohms
200x2 @ 2 ohms
20Hz - 20kHz
<0.05%
150mV - 5V
>105dB
>50dB
H 2.2” x W 7.7” x L 10.3”
(Small chassis)
P500-2
125x2 @ 4 ohms
250x2 @ 2 ohms
20Hz - 20kHz
<0.05%
150mV - 5V
>105dB
>50dB
H 2.2” x W 7.7” x L 13”
(Medium chassis)
P400-4
50x4 @ 4 ohms
100x4 @ 2 ohms
20Hz - 20kHz
<0.05%
150mV - 5V
>105dB
>50dB
H 2.2” x W 7.7” x L 13”
(Medium chassis)
P500-4
60x4 @ 4 ohms
125x4 @ 2 ohms
20Hz - 20kHz
<0.05%
150mV - 5V
>105dB
>50dB
H 2.2” x W 7.7” x L 13”
(Medium chassis)
P300-1
150x1 @ 4 ohms
300x1 @ 2 ohms
20Hz - 20kHz
<0.1%
150mV - 5V
>100dB
N/A
H 2.2” x W 7.7” x L 8.9”
(Mini chassis)
P400-1
200x1 @ 4 ohms
400x1 @ 2 ohms
20Hz - 20kHz
<0.1%
150mV - 5V
>100dB
N/A
H 2.2” x W 7.7” x L 8.9”
(Mini chassis)
P500-1bd
200x1 @ 4 ohms
400x1 @ 2 ohms
500x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.2” x W 7.7” x L 10.3”
(Small chassis)
P700-1bd
225x1 @ 4 ohms
450x1 @ 2 ohms
700x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.2” x W 7.7” x L 10.3”
(Small chassis)
P1000-1bd
250x1 @ 4 ohms
500x1 @ 2 ohms
1000x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.2” x W 7.7” x L 14.4”
(Large chassis)
P500X4D
75x4 @ 4 ohms
125x4 @ 2 ohms
20Hz - 20kHz
<0.1%
150mV - 5V
>100dB
>50dB
H 2.2” x W 8.1” x L 10.7”
P1000X4D
150x4 @ 4 ohms
250x4 @ 2 ohms
20Hz - 20kHz
<0.1%
150mV - 5V
>100dB
>50dB
H 2.2” x W 8.1” x L 11.9”
75x4 + 200x1 @ 4 ohms
125x4 + 500x1 @ 2 ohms
250x2 + N/A @ 4 ohms bridged
20Hz - 20kHz
<0.1%
150mV - 5V
>100dB
>50dB
H 2.2” x W 8.1” x L 11.9”
Full Range Class d +
Class d
4 layer 2 oz. copper
circuit board
24 dB/oct - variable
High or Low Pass and
All Pass
500x1 @ 4 ohms
1000x1 @ 2 ohms
1000x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.2” x W 8.1” x L 10.7”
Class d
circuit board
Low Pass
T2500-1bdCP
P1000X5D
P1000X1D
97 2012 BUYERS GUIDE AMPLIFIER SPECIFICATIONS/FEATURES
TRANS•ana
Variable
Crossover
Input Sensitivity
Circuit Board
THD+N @
Rated Power
120x2 @ 4 ohms
200x2 @ 2 ohms
Topology
Frequency
Response
Rated Power
T400-2
circuit board
All Pass
Class bd w/ Constant
Power
circuit board
Low Pass
TRANS•ana
circuit board
All Pass
Class bd
circuit board
Low Pass
Full Range Class d
circuit board
All Pass
All Pass
Speaker
Terminals
Additional
Features
Focused mass die-cast heatsink /
DTM™- Dynamic Thermal Management / MEHSA™- Maximum
Efficiency HeatSink Application
Power
Terminals
Status
Indicators
Discrete light pipe Power,
Thermal and Protection
indicators
RCA Inputs
Protection
NOMAD circuit
• Short Circuit
• Thermal
• Low Impedance
Heatsink
Design
Impedance
Stability
1 ohm stereo / 2 ohm mono
stable
Balanced differential RCA
inputs and RCA pass thru
4 Ga. c-clamp
compression
connector
8 Ga. c-clamp
compression
connector
Punch EQ variable from 0dB
to +18dB @ 45Hz and/or
0dB to +12dB @ 12KHz with
optional PEQ
4 Ga. c-clamp
compression
connector
8 Ga. c-clamp
compression
connector
Punch EQ variable from 0dB to
+18dB @ 45Hz with optional
Punch Equalization
Balanced differential panel
mount RCA and RCA pass
thru
stealth proprietary 1/0 Ga.
4mm allen head
set-screw cast
zinc connector
stealth
proprietary 8 Ga.
4mm allen head
set-screw cast
zinc connector
Punch Equalization and BDSync
or Master/Slave
inputs
4 Ga. c-clamp
compression
connector
8 Ga. c-clamp
compression
connector
+18dB @ 45Hz and/or 0dB to
+12dB @ 12KHz with optional
Punch Equalization
Differential RCA inputs
Differential RCA inputs and
RCA pass thru
Focused mass die-cast heatsink
/ 4-Point Thermal Monitoring /
MEHSA™- Maximum Efficiency
HeatSink Application
Differential RCA inputs and
RCA pass thru
1 ohm mono rated
NOMAD circuit
• Short Circuit
• Thermal
• Low Impedance
indicators
indicators / In Mold Roll LED
backlit signal/power Volume
Units meters
rated
NOMAD circuit
• Short Circuit
• Thermal
• Low Impedance
indicators
2 ohm mono rated
Punch Equalization
inputs
Punch Equalization
1 ohm mono rated
NOMAD circuit
• Short Circuit
• Thermal
• Low Impedance
indicators
4 Ga. c-clamp
compression
connector
8 Ga. c-clamp
compression
connector
Punch Equalization
rated
• Short Circuit
• Thermal
Discrete Power and Protection
indicators
RCA input and RCA pass thru
4 Ga. set-screw
connector
10 Ga. set-screw
connector
+18dB @ 45Hz
rated
• Short Circuit
• Thermal
indicators
4 Ga. set-screw
connector
10 Ga. set-screw
connector
Punch Equalization level control
and infrasonic filter
1 ohm mono rated
• Short Circuit
• Thermal
indicators
4 Ga. set-screw
connector
10 Ga. set-screw
connector
Punch Equalization level control
and infrasonic filter
*Specifications subject to change
S/N Ratio
Channel
Separation
150mV - 11V
>100dB
>50dB
75x4 @ 4 ohms
20Hz - 20kHz
<0.5%
150mV - 11V
>100dB
>50dB
H 1.5” x W 4.25” x L 6.75”
75x1 @ 4 ohms
150x1 @ 2 ohms
300x1 @ 1 ohm
20Hz - 250Hz
<0.2%
150mV - 11V
>105dB
N/A
H 1.5” x W 4.25” x L 6.75”
175x1 @ 4 ohms
300x1 @ 2 ohms
500x1 @ 1 ohm
20Hz - 20kHz
<0.1%
150mV - 11V
>105dB
N/A
H 1.5” x W 4.25” x L 8.25”
R125-2
40x2 @ 4 ohms
65x2 @ 2 ohms
20Hz - 20kHz
<0.1%
150mV - 8V
>90dB
>50dB
H 2.4” x W 7.7” x L 7.7”
R250-4
40x4 @ 4 ohms
65x4 @ 2 ohms
20Hz - 20kHz
<0.1%
150mV - 8V
>90dB
>50dB
H 2.4” x W 7.7” x L 11.6”
R300-4
50x4 @ 4 ohms
75x4 @ 2 ohms
20Hz - 20kHz
<0.1%
150mV - 8V
>90dB
>50dB
H 2.4” x W 7.7” x L 17.1”
50x4 + 200x1 @ 4 ohms
75x4 + 300x1 @ 2 ohms
150x2 + N/A @ 4 ohms bridged
20Hz - 20kHz
<0.1%
150mV - 8V
>90dB
>50dB
R250-1D
125x1 @ 4 ohms
250x1 @ 2 ohms
20Hz - 250Hz
<0.1%
150mV - 8V
>100dB
R500-1D
250x1 @ 4 ohms
500x1 @ 2 ohms
20Hz - 250Hz
<0.1%
150mV - 8V
320x1 @ 4 ohms
500x1 @ 2 ohms
20Hz - 250Hz
<0.1%
R400-4D
75x4 @ 4 ohms
100x4 @ 2 ohms
20Hz - 20kHz
R600-4D
100x4 @ 4 ohms
150x4 @ 2 ohms
R750-1D
R1200-1D
Circuit Board
Input Sensitivity
<0.5%
H 1.5” x W 4.25” x L 6.75”
Class br
circuit board
12 dB/oct - 80Hz fixed
All Pass
Class br
circuit board
Low Pass
Class ab
Single layer 2 oz. copper circuit board
High Pass / variable
Low Pass / All Pass
H 2.4” x W 7.7” x L 17.1”
Class ab + Class d
High Pass / variable
Low Pass / All Pass
N/A
H 2.4” x W 7.7” x L 7.7”
Class d
Low Pass
>100dB
N/A
H 2.4” x W 7.7” x L 7.7”
150mV - 8V
>100dB
N/A
H 2.4” x W 7.7” x L 16.7”
Class ab
Low Pass
<0.1%
150mV - 5V
>90dB
>50dB
H 2.0” x W 6.8” x L 9.1”
Full Range Class d
circuit board
All Pass
20Hz - 20kHz
<0.1%
150mV - 5V
>90dB
>50dB
H 2.0” x W 6.8” x L 11.1”
250x1 @ 4 ohms
500x1 @ 2 ohms
750x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.0” x W 6.8” x L 9.1”
Class d
circuit board
Low Pass
400x1 @ 4 ohms
800x1 @ 2 ohms
1200x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.0” x W 6.8” x L 11.1”
M400-4D
75x4 @ 4 ohms
100x4 @ 2 ohms
20Hz - 20kHz
<0.1%
150mV - 5V
>90dB
>50dB
H 2.0” x W 6.8” x L 9.1”
Full Range Class d
Conformal coated 4
layer 2 oz. copper
circuit board
All Pass
M600-4D
100x4 @ 4 ohms
150x4 @ 2 ohms
20Hz - 20kHz
<0.1%
150mV - 5V
>90dB
>50dB
H 2.0” x W 6.8” x L 11.1”
M750-1D
250x1 @ 4 ohms
500x1 @ 2 ohms
750x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.0” x W 6.8” x L 9.1”
Class d
Conformal coated 4
layer 2 oz. copper
circuit board
Low Pass
M1200-1D
400x1 @ 4 ohms
800x1 @ 2 ohms
1200x1 @ 1 ohm
20Hz - 250Hz
<0.8%
150mV - 5V
>100dB
N/A
H 2.0” x W 6.8” x L 11.1”
PBR300X4
PBR300X1
PBR500X1
R600-5
R500-1
99 2012 BUYERS GUIDE AMPLIFIER SPECIFICATIONS/FEATURES
Variable
Crossover
Topology
THD+N @
Rated Power
20Hz - 20kHz
Dimensions
Frequency
Response
Rated Power
100x2 @ 4 ohms
150x2 @ 2 ohms
PBR300X2
Speaker
Terminals
Additional
Features
Inter-locking extruded aluminum
heatsinks w/ pierced metal
recessed badge
Power
Terminals
Status
Indicators
LED Power/Protection and
boost mode indicators
RCA Inputs
Protection
• Short Circuit
• Thermal
• Low Impedance
Heatsink
Design
Impedance
Stability
rated
RCA/Speaker level pigtailed
Molex connector
10 Ga. Molex
connector
16 Ga. pigtailed
Molex connector
Optional PEQ variable from 0dB
to +18dB @ 45Hz and/or 0dB to
+12dB @ 12KHz, variable highlevel adjust and 6V DC offset w/
remote out
4 ohm stereo ONLY
1 ohm mono rated
rated
Variable high-level adjust and
6V DC offset w/ remote out
• Short Circuit
• Thermal
• Low Impedance
LED Power/Protection and
boost mode indicators
• Short Circuit
• Thermal
LED Power and Protection
indicators
Inter-locking extruded aluminum
heatsinks w/ pierced metal
recessed badge
Extruded aluminum heatsink w/
pierced metal recessed badge
RCA/Speaker level pigtailed
Molex connector
10 Ga. Molex
connector
16 Ga. pigtailed
Molex connector
8 Ga. Molex
connector
12 Ga. pigtailed
Molex connector
4 Ga. spade
connector
12 Ga. spade
connector
Optional PEQ Variable from
0dB to +18dB @ 45Hz, variable
high-level adjust and 6V DC
offset w/ remote out
Punch Bass variable from 0dB
to +12dB @ 45Hz
rated - Front/Rear and 2 ohm
mono rated - Sub
• Short Circuit
• Thermal
indicators
4 Ga. spade
connector
12 Ga. spade
connector
Punch Bass 0dB/+6dB/+12dB
@ 45Hz - Front/Rear and
Variable from 0dB to +12dB @
45Hz - Sub
2 ohm mono rated
• Short Circuit
• Thermal
indicators
4 Ga. spade
connector
12 Ga. spade
connector
Punch Bass variable from
0dB to +12dB @ 45Hz and
included PLC
2 ohm mono rated
• Short Circuit
• Thermal
indicators
4 Ga. spade
connector
12 Ga. spade
connector
0dB to +12dB @ 45Hz and
included PLC
rated
• Short Circuit
• Thermal
indicators
4 Ga. set-screw
connector
10 Ga. set-screw
connector
+18dB @ 45Hz
1 ohm mono rated
• Short Circuit
• Thermal
indicators
4 Ga. set-screw
connector
10 Ga. set-screw
connector
PEQ level control and infrasonic
filter
rated
• Short Circuit
• Thermal
indicators
4 Ga. set-screw
connector
10 Ga. set-screw
connector
+18dB @ 45Hz
1 ohm mono rated
• Short Circuit
• Thermal
indicators
4 Ga. set-screw
connector
10 Ga. set-screw
connector
PEQ level control and infrasonic
filter
0dB/+6dB/+12dB @ 45Hz
Sensitivity
RMS Power
Handling
(watts)
Peak Power
Handling
(watts)
Mounting
Diameter
Mounting
Depth
Speaker
Displacement
(cu. ft.)
Sealed Enclosure (cu. ft.)
22.08
85 dB
1200
2400
10.8"
9.0"
0.151
N/A
T2D215/T2D415
15”
Dual 2 Ω or 4 Ω
22.0
87 dB
1200
2400
13.94"
10.0"
0.176
N/A
2.75 cu ft. Port: (1) 6”x17”
T1D210/T1D410
10”
Dual 2 Ω or 4 Ω
16.4
83 dB
600
1200
9.13"
6.5"
0.203
0.75
1.50 cu ft. Port: (1) 4”x11”
T1D212/T1D412
12”
Dual 2 Ω or 4 Ω
16.4
86 dB
800
1600
11.25"
6.9"
0.308
1.25
1.75 cu ft. Port: (1) 4”x9”
T1D215/T1D415
15”
Dual 2 Ω or 4 Ω
16.4
88 dB
1000
2000
13.94"
8.4"
0.547
2.25
2.66 cu ft. Port: (1) 4”x10”
T0D210/T0D410
10”
Dual 2 Ω or 4 Ω
14.8
81 dB
550
1100
9.13"
6.5"
0.203
0.75
1.50 cu ft. Port: (1) 4”x11”
T0D212/T0D412
12”
Dual 2 Ω or 4 Ω
14.8
84 dB
700
1400
11.25"
6.9"
0.308
1.25
1.75 cu ft. Port: (1) 4”x9”
T0D215/T0D415
15”
Dual 2 Ω or 4 Ω
14.8
87 dB
800
1600
13.94"
8.4"
0.547
2.25
2.66 cu ft. Port: (1) 4”x10”
P3D2-10/P3D4-10
10”
Dual 2 Ω or 4 Ω
13.9
82 dB
500
1000
9.13"
6.2"
0.127
0.59
1.40 cu ft. Port: (1) 4”x14”
P3D2-12/P3D4-12
12”
Dual 2 Ω or 4 Ω
13.9
85 dB
600
1200
11.25"
6.7"
0.194
1.02
1.79 cu ft. Port: (1) 4”x10”
P3D2-15/P3D4-15
15”
Dual 2 Ω or 4 Ω
13.9
86 dB
600
1200
13.94"
7.6"
0.247
1.58
2.66 cu ft. Port: (1) 4”x10”
P3SD2-8/P3SD4-8
8”
Dual 2 Ω or 4 Ω
8.4
82 dB
150
300
7.13”
2.7”
0.040
0.25
0.75 cu ft. Port: (1) 3”x9”
P3SD2-10/P3SD4-10
10”
Dual 2 Ω or 4 Ω
8.4
83 dB
300
600
9.13”
3.5”
0.074
0.50
1.00 cu ft. Port: (1) 4”x12”
P3SD2-12/P3SD4-12
12”
Dual 2 Ω or 4 Ω
8.4
85 dB
400
800
11.25”
3.7”
0.086
1.00
1.25 cu ft. Port: (1) 4”x12”
8”
Dual 2 Ω or 4 Ω
7.8
83 dB
250
500
7.13"
4.8"
0.071
0.23
0.65 cu ft. Port: (1) 2”x8”
P2D2-10/P2D4-10
10”
Dual 2 Ω or 4 Ω
11
84 dB
300
600
9.13"
5.9"
0.088
0.59
1.40 cu ft. Port: (1) 4”x14”
P2D2-12/P2D4-12
12”
Dual 2 Ω or 4 Ω
13.3
86 dB
400
800
11.25"
6.4"
0.170
1.02
1.79 cu ft. Port: (1) 4”x10”
P2D2-15/P2D4-15
15”
Dual 2 Ω or 4 Ω
13.3
86 dB
400
800
13.94"
7.3"
0.219
1.58
2.66 cu ft. Port: (1) 4”x10”
8”
Single 4 Ω or 8 Ω
7.6
83.5 dB
200
400
7.13"
4.4"
0.053
0.23
0.65 cu ft. Port: (1) 2”x6”
P1S4-10/P1S8-10
10”
Single 4 Ω or 8 Ω
9.4
85 dB
250
500
9.13"
5.3"
0.085
0.59
1.40 cu ft. Port: (1) 3”x8”
P1S4-12/P1S8-12
12”
Single 4 Ω or 8 Ω
9.4
86 dB
250
500
11.25"
6.0"
0.113
1.02
1.79 cu ft. Port: (1) 3”x6”
P1S4-15/P1S8-15
15”
Single 4 Ω or 8 Ω
9.4
87.5 dB
250
500
13.94"
7.0"
0.191
1.58
2.66 cu ft. Port: (1) 4”x8”
R2D2-10/R2D4-10
10”
Dual 2 Ω or 4 Ω
6.5
89 dB
250
500
9.13"
4.3"
0.101
0.59
1.40 cu ft. Port: (1) 4”x13”
R2D2-12/R2D4-12
12”
Dual 2 Ω or 4 Ω
6.5
87 dB
250
500
11.25"
5.1"
0.150
1.02
1.79 cu ft. Port: (1) 4”x9.3”
R2SD2-10/R2SD4-10
10”
Dual 2 Ω or 4 Ω
8
83 dB
200
400
9.13"
3.4"
0.037
0.70
1.40 cu ft. Port: (1) 4”x13.7”
R2SD2-12/R2SD4-12
12”
Dual 2 Ω or 4 Ω
10
85 dB
250
500
11.25"
3.6"
0.039
0.90
1.79 cu ft. Port: (1) 4”x11.8”
R1S410
10”
Single 4 Ω
5.8
86 dB
150
300
9.13"
4.6"
0.024
0.75
N/A
R1S412
12”
Single 4 Ω
6.3
87 dB
150
300
10.94"
5.0"
0.043
1.02
N/A
M210S4/M210S4B
10”
Single 4 Ω
10
86 dB
250
500
9.13"
5.54"
0.154
0.75”
1.25 cu ft. Port: (1) 4”x8.52”
*Infinite Baffle compatible
M212S4/M212S4B
12”
Single 4 Ω
12
87 dB
300
600
11.25"
6.58"
0.258
1.00”
1.50 cu ft. Port: (1) 3”x5.7 4”
*Infinite Baffle compatible
P2D2-8/P2D4-8
P1S4-8/P1S8-8
Dustcap
Material
Xmax (mm)
Dual 2 Ω or 4 Ω
*Surround
Material
Nominal
Impedance
12”
Ported
Enclosure
Speaker Size
T2D212/T2D412
2.00 cu ft. Port: (3) 3”x12”
Tall profile, high density
Santoprene™
Hard anodized
aluminum
Tall profile, Santoprene™
with VAST™
Hard anodized
aluminum
with VAST™
Hard anodized
aluminum
with VAST™
Hard anodized
aluminum
M-roll, Santoprene™ with
VAST™
Hard anodized
aluminum
with VAST™
Kevlar fiber reinforced
semi-pressed paper
Half-roll, high density
Nitrile Butadiene Rubber
Kevlar fiber reinforced
semi-pressed paper
Half-roll, Sealed
Polyether-ester foam
Polypropylene
Half-roll, Sealed
Polyether-ester foam
Injection molded
Polypropylene
Half-roll, Nitrile Butadiene Rubber
Polypropylene
with VAST™
Injection molded
Polypropylene
Speaker
Model
Nominal
Impedance
RMS Power
Handling
Peak Power
Handling
Dimensions (HxWxD)
P2-1X12
(1) P2D2-12
1Ω
400 Watts
800 Watts
15.125” x 19.125” x 15.75”
P2-2X12
(2) P2D4-12
1Ω
800 Watts
1600 Watts
15.125” x 33.875” x 15.75”
P3-1X10
(1) P3D2-10
1Ω
500 Watts
1000 Watts
13.125” x 17.0” x 15.125”
P3-2X10
(2) P3D4-10
1Ω
1000 Watts
2000 Watts
13.125” x 31.125” x 15.125”
13.125” x 17.0” x 15.125”
P3-1X12
(1) P3D2-12
1Ω
600 Watts
1200 Watts
15.125” x 19.125” x 15.75”
13.125” x 31.125” x 15.125”
P3-2X12
(2) P3D4-12
1Ω
1200 Watts
2400 Watts
15.125” x 33.875” x 15.75”
Speaker
Model
Nominal
Impedance
RMS Power
Handling
Peak Power
Handling
Dimensions (HxWxD)
P1-1X10
(1) P1S4-10
4Ω
250 Watts
500 Watts
13.125” x 17.0” x 15.125”
P1-2X10
(2) P1S4-10
2Ω
500 Watts
1000 Watts
13.125” x 31.125” x 15.125”
P1-1X12
(1) P1S4-12
4Ω
250 Watts
500 Watts
15.125” x 19.125” x 15.75”
P1-2X12
(2) P1S4-12
2Ω
500 Watts
1000 Watts
15.125” x 33.875” x 15.75”
P2-1X10
(1) P2D2-10
1Ω
300 Watts
600 Watts
P2-2X10
(2) P2D4-10
1Ω
600 Watts
1200 Watts
101 2012 BUYERS GUIDE SUBWOOFER & LOADED ENCLOSURE SPECIFICATIONS/FEATURES
Motor
Structure
Motor Cover
Terminal
Connectors
Dual mirror imaged, progressive roll tear
& fatigue resistant poly-cotton spider with
multipoint stitched lead wire technique
Die-cast aluminum
Triple stack ferrite magnet with
extended vented pole and bumped
vented backplate with IDHS™
Die-cast motor
cover/heat
sink
Dual 8 Ga. custom
insulated/isolated
compression style
Reversible die-cast aluminum w/ Soft Touch paint
Kevlar® fiber
reinforced semipressed paper
3" 4-layer ultra-high temp. aluminum
voice coil with spun-laced Nomex™
insulating reinforcement collar
multipoint stitched lead wire technique and
proprietary spider cooling vents
Die-cast aluminum
with FlexFit™
Double stack ferrite magnet with
vented backplate with IDHS™
Frame
integrated
Dual 10 Ga.
proprietary SWIFT™
terminal
Reversible die-cast
aluminum w/ Soft Touch
paint and integrated/removable grille
Kevlar® fiber
Die-cast aluminum
with FlexFit™
vented backplate
Frame
integrated
Dual 10 Ga.
proprietary SWIFT™
terminal
Reversible die-cast
aluminum w/ Soft Touch
paint and integrated/removable grille
Hard anodized
aluminum
2.5" 4-layer ultra-high temp.
aluminum voice coil with spun-laced
Nomex™ insulating reinforcement
collar
StampCast™ with
FlexFit™
vented backplate.
Removable
Semi-flexible
Polyvinyl Chloride (PVC)
8 Ga. custom
insulated/isolated
compression style
and optional integrated grille
Hard anodized
aluminum
2.5” 4-layer ultra-high temp.
aluminum voice coil with spun-laced
collar
Dual laminated, progressive roll tear &
fatigue resistant poly-cotton spiders with embedded lead wire technique and proprietary
spider cooling vents
StampCast™ with
FlexFit™
Ferrite magnet structure with
vented backplate.
Removable
Semi-flexible
8 Ga. custom
insulated/isolated
compression style
and optional grille
Kevlar® fiber
2.25" 4-layer high temp. aluminum
StampCast™ with
FlexFit™
Double stack ferrite magnet
structure with extended vented
pole and bumped backplate.
Removable
Semi-flexible
8 Ga. custom
insulated/isolated
compression style
and optional integrated grille
Kevlar® fiber
2" 4-layer high temp. aluminum
Tear & fatigue resistant poly-cotton spider
with multipoint stitched lead wire technique
and proprietary spider cooling vents.
StampCast™ with
FlexFit™
backplate.
Removable
Semi-flexible
8 Ga. custom
insulated/isolated
compression style
Reversible Acrylonitrile
Butadiene Styrene with
optional integrated grille
Polypropylene
and spider cooling vents.
Stamped steel
backplate.
Removable
Semi-flexible
Standard 10 Ga.
Integrated Polyvinyl
Chloride trim ring
Injection molded
Polypropylene
and spider cooling vents.
Stamped steel
backplate.
Standard 10 Ga.
Integrated Polyvinyl
Chloride trim ring
Polypropylene
Stamped steel
backplate.
Standard 10 Ga.
Injection molded
Polypropylene
Tear & fatigue resistant Nomex™ blend
spider with multipoint stitched lead wire
technique.
Centrex™
Shielded ferrite magnet structure
with extended vented pole and
bumped backplate.
Proprietary gold
plated compression
terminal. 8 Ga.
Water draining Centrex™
trim ring with integrated
stainless steel grille
Spider
Cone
Material
Speaker
Model
Nominal
Impedance
RMS Power
Handling
Peak Power
Handling
Dimensions (HxWxD)
Speaker
Model
Nominal
Impedance
RMS Power
Handling
Peak Power
Handling
Dimensions (HxWxD)
P3S-1X10
(1) P3SD2-10
1Ω
300 Watts
600 Watts
13.5" x 19.0" x 5.3"/3.3"
R1L-1X10
(1) R1S410
4Ω
150 Watts
300 Watts
12.0” x 15.825” x 12.25”
P3S-1X12
(1) P3SD2-12
1Ω
400 Watts
800 Watts
13.5" x 27.4" x 5.3"/3.3"
R1L-2X10
(2) R1S410
2Ω
300 Watts
600 Watts
12.0” x 30.0” x 12.25”
P300-10
N/A
N/A
300 Watts
600 Watts
13.3”x18.38”x9.37”
R1L-1X12
(1) R1S412
4Ω
150 Watts
300 Watts
14.0” x 17.5” x 12.25”
R300-12
N/A
N/A
300 Watts
600 Watts
14.96”x20.35”x11.50”
R1L-2X12
(2) R1S412
2Ω
300 Watts
600 Watts
14.0” x 33.75” x 12.25”
R2S-1X10
(1) R2SD4-10
2Ω
300 Watts
600 Watts
13.5” x 19.0” x 5.3”/3.3”
R2S-1X12
(1) R2SD4-12
2Ω
400 Watts
800 Watts
13.5” x 27.4” x 5.3”/3.3”
Sealed Centrex™ motor
cover
Trim Ring
Frame
Structure
flat-wound voice coil with spun-laced
collar
Voice Coil
Hard anodized
aluminum
Tweeter Size
RMS Power
Handling
(watts)
Peak Power
Handling
(watts)
Frequency
Response
Sensitivity
(1W/1M)
Sensitivity
(2.83V/1M)
Mounting
Depth
Surround
Material
Cone
Material
Spider
1”
150 watts
300 watts
45Hz-40kHz
88.5dB
91.5dB
2.48”
Butyl rubber with
VAST™
Tri-laminate Liquid Crystal
Polymer Fiber w/ machined copper phase plug
Nomex™ w/ balanced
stitched woven embedded
fiber/flat lead wires
T3652-S
6.5”
T252-S
5.25”
1”
75 watts
150 watts
65Hz-22kHz
87dB
90dB
1.97”
T2652-S
6.5”
1”
100 watts
200 watts
50Hz-22kHz
88dB
91dB
2.48”
T2T-S
N/A
1”
100 watts
200 watts
3kHz-22kHz
90dB
93dB
*0.91”
T152-S
5.25”
1”
75 watts
150 watts
65Hz-22kHz
87dB
90dB
1.97”
1”
200 watts
125 watts
250 watts
48Hz-24kHz
87dB
90dB
2.48”
T16-S
6.5”
1”
TBD
TBD
TBD
TBD
TBD
TBD
T165-S
6.5”
1”
TBD
TBD
TBD
TBD
TBD
TBD
T1675-S
6.5”
1”
100 watts
200 watts
50Hz-22kHz
88dB
91dB
2.48”
T1T-S
N/A
1”
100 watts
200 watts
3kHz-22kHz
90dB
93dB
*0.91”
T142
4”
0.75”
40 watts
80 watts
85Hz-22kHz
85dB
88dB
1.77”
T152
5.25”
1”
60 watts
120 watts
65Hz-22kHz
87dB
90dB
1.97”
T16
6.0”
1”
70 watts
140 watts
65Hz-22kHz
87.5dB
91.5dB
1.93”
T165
6.5”
1”
70 watts
140 watts
65Hz-22kHz
87.5dB
91.5dB
1.93”
T1675
6.75”
1”
75 watts
150 watts
50Hz-22kHz
88dB
91dB
2.48”
T1462
4”x6”
0.75”
45 watts
90 watts
75Hz-22kHz
85.5dB
88.5dB
1.97”
T1572
5”x7”
1”
70 watts
140 watts
60Hz-22kHz
87.5dB
90.5dB
2.28”
T1682
6”x8”
1”
80 watts
160 watts
55Hz-22kHz
88dB
91dB
2.56”
T1692
6”x9”
1”
100 watts
200 watts
50Hz-22kHz
90dB
93dB
3.39”
T1693
6”x9”
1”
100 watts
200 watts
50Hz-22kHz
90dB
93dB
3.39”
P152-S
5.25”
1”
50 watts
100 watts
70Hz-22kHz
87dB
90dB
1.87”
P16-S
6.0”
1”
TBD
TBD
TBD
TBD
TBD
TBD
P165-S
6.5”
1”
TBD
TBD
TBD
TBD
TBD
TBD
P1675-S
6.75”
1”
60 watts
120 watts
60Hz-22kHz
89dB
92dB
2.17”
P1T-S
N/A
1”
60 watts
120 watts
3.5kHz-22kHz
90dB
93dB
*0.91”
P132
3.5”
0.5”
20 watts
40 watts
120Hz-22kHz
85dB
88dB
1.38”
P142
4”
0.75”
30 watts
60 watts
100Hz-22kHz
86.5dB
89.5dB
1.69”
P152
5.25”
0.75”
40 watts
80 watts
70Hz-22kHz
87dB
90dB
1.87”
P16
6.0”
0.75”
55 watts
110 watts
65Hz-22kHz
88dB
91dB
1.89”
P165
6.5”
0.75”
55 watts
110 watts
65Hz-24kHz
88dB
91dB
1.89”
P1675
6.75”
0.75”
60 watts
120 watts
60Hz-24kHz
89dB
92dB
2.17”
P1462
4”x6”
0.75”
35 watts
70 watts
90Hz-22kHz
87.5dB
90.5dB
1.81”
P1572
5”x7”
0.75”
60 watts
120 watts
75Hz-22kHz
89dB
92dB
2.20”
P1683
6”x8”
0.75”
65 watts
130 watts
65Hz-24kHz
90dB
93dB
2.28”
P1692
6”x9”
0.75”
75 watts
150 watts
60Hz-22kHz
91dB
94dB
3.07”
P1694
6”x9”
0.75”
75 watts
150 watts
60Hz-24kHz
91dB
94dB
3.07”
PPS4-6
6.5”
N/A
100 watts
200 watts
85Hz-5kHz
92.5dB
95.5dB
2.24”
PPS8-6
6.5”
N/A
100 watts
200 watts
87Hz-5kHz
91.5dB
94.5dB
2.24”
PPS4-8
8.0”
N/A
125 watts
250 watts
80Hz-5kHz
94.5dB
97.5dB
2.91”
PPS8-8
8.0”
N/A
125 watts
250 watts
82Hz-5kHz
93dB
96dB
2.91”
PP4-T
N/A
1.5”
50 watts
100 watts
3kHz-20kHz
103dB
106dB
2.59”
PP8-T
N/A
1.5”
50 watts
100 watts
3kHz-20kHz
103dB
106dB
2.59”
Frame
Structure
Speaker Size
6.5”
T5652-S
Die-cast aluminum with
FlexFit™
Butyl rubber with
VAST™
Woven Liquid Crystal
Polymer Fiber™
Nomex™ w/ balanced
stitched woven embedded
fiber/flat lead wires
FlexFit™
Butyl rubber with
VAST™
Injection molded
Polypropylene-carbon
fiber blend w/ machined
aluminum phase plug
Fatigue resistant poly-cotton
linear spider w/ woven fiber
reinforced lead wire
StampCast™ with Flex-fit™
Aluminum dome w/
integral suspension &
tuned chamber
Butyl rubber with
VAST™
Injection molded
fiber blend
Treated fabric dome w/
integral suspension &
tuned chamber
Butyl rubber with
VAST™
Injection molded
fiber blend
Nitrile Butadiene
Rubber with
VAST™
Injection molded mineral
filled Polypropylene
Plated Polyether Imide
(PEI) dome
Nitrile Butadiene
Rubber with
VAST™
Injection molded mineral
filled Polypropylene
W-Style, Treated
Cloth
Fiber reinforced paper
w/ machined aluminum
phase plug
Fatigue resistant polycotton
linear spider w/ woven
lead wire
N/A
N/A
N/A
FlexFit™
*Flush Mount
103 2012 BUYERS GUIDE SPEAKERS SPECIFICATIONS/FEATURES
Accessories
Neodymium magnet w/
IDHS™
1"(25mm) Liquid Crystal Polymer Fiber™
dome w/ neodymium magnet and DDC™
External audiophile grade component crossover w/ 5%
(Tol) parts
Grilles and mounting hardware
1”(25mm) aluminum dome w/ neodymium
motor and DDC™
(Tol) parts
Unified tab
Multi-OEM™ adaptor plates, grilles
and mounting hardware
(Tol) parts
18 Ga. Pigtail
Flush w/ DDC™, surface and angle
mounting hardware
(Tol) parts
Unified tab
(Tol) parts
18 Ga. Pigtail
mounting hardware
Ferrite magnet structure
Removable Semi-flexible
Polyvinyl Chloride
Neodymium
Polyvinyl Chloride
1”(25mm) treated fabric dome w/
neodymium motor and DDC™
Neodymium
Polyvinyl Chloride
1”(25mm) aluminum dome w/ neodymium
motor and DDC™
ICC™ component crossover with 5% (Tol) parts
Unified tab
Polyvinyl Chloride
1”(25mm) plated Polyether Imide (PEI)
dome w/ neodymium motor and DDC™
Unified tab
External component crossover w/ 10% (Tol) parts
18 Ga. Pigtail
mounting hardware
Neodymium
Polyvinyl Chloride
3/4”(20mm) pole mounted plated Polyether Imide (PEI) dome w/ neodymium
motor
ICC™ with 10% (Tol) parts
Unified tab
Removable Semi-flexible PVC
N/A
12 Ga. compression style
N/A
1.5”(38mm) horn design
12 Ga. compression style
Mounting hardware
Terminal
Connectors
Cat 5 remote extension cable,
grilles and mounting hardware
Crossover
Tweeter
Single chassis stereo w/ audiophile 1% mil-spec components and dual micro-controller for intelligent protection w/
integrated/remote tuning module and RFLink™ equipped
Motor
Cover
1"(25mm) Liquid Crystal Polymer Fiber
ring radiator dome, dual neodymium
magnets w/ IDHS™, low resonant chamber
and DDC™
Motor
Structure
Multi-pole™ dual neodymium
magnet w/ IDHS™
Peak Power
Handling
(watts)
Frequency
Response
Sensitivity
(1W/1M)
Sensitivity
(2.83V/1M)
Mounting
Depth
Surround
Material
40 watts
80 watts
58Hz-20kHz
85dB
88dB
1.91”
SPE Foam
R16-S
6.0”
1”
40 watts
80 watts
60Hz-20kHz
89dB
92dB
1.97”
R165-S
6.5”
1”
40 watts
80 watts
60Hz-20kHz
89dB
92dB
1.97”
R1675-S
6.75”
1”
40 watts
80 watts
55Hz-20kHz
89dB
92dB
2.00”
R1T-S
N/A
1”
40 watts
80 watts
2.5kHz-22kHz
72.5dB
75.5dB
*0.76”
R142
4”
0.5”
25 watts
50 watts
100Hz-22kHz
85.5dB
88.5dB
1.64”
R152
5.25”
0.5”
35 watts
70 watts
53Hz-22kHz
87dB
90dB
1.91”
R16
6.0”
0.5”
40 watts
80 watts
48Hz-22kHz
88dB
91dB
1.97”
R165
6.5”
0.5”
40 watts
80 watts
48Hz-22kHz
88dB
91dB
1.97”
R1675
6.75”
0.5”
40 watts
80 watts
48Hz-22kHz
89dB
92dB
2.00”
R1682
6”x8”
0.5”
50 watts
100 watts
57Hz-22kHz
88dB
91dB
2.54”
R1693
6”x9”
0.5”
60 watts
120 watts
48Hz-22kHz
90dB
93dB
2.65”
R1694
6”x9”
0.5”
60 watts
120 watts
48Hz-22kHz
90dB
93dB
2.85”
M262/M262B
6.5”
1”
75 watts
150 watts
53Hz-22kHz
88dB
91dB
2.80”
M282/M282B
8”
1”
100 watts
200 watts
48Hz-22kHz
90dB
93dB
3.42”
Frame
Structure
RMS Power
Handling
(watts)
1”
Spider
Tweeter Size
5.25”
Cone
Material
Speaker Size
R152-S
Vacuum formed PP
Fatigue resistant spider
Stamped steel
Mylar balanced dome
SPE Foam
Vacuum formed Polypropylene
Fatigue resistant spider
Stamped steel
Ultraviolet &
salt-fog resistant
Thermo-Plastic
Elastomer
Injection molded,
parabolic shape mineral
filled Polypropylene w/ UV
inhibitors
Moisture, tear and fatigue
resistant aramid fiber spider
Injection molded 100% UV
stable Centrex® w/ Flex-fit™
*Flush Mount
*M262-WAKE
*M262B-WAKE
*M282-WAKE
*M282B-WAKE
Speaker
Model
Nominal
Impedance
RMS Power
Handling
Peak Power
Handling
Dimensions (HxWxD)
(1) M262
4Ω
75 Watts
150 Watts
10.96” x 7.03” x 11.26”
(1) M262B
4Ω
75 Watts
150 Watts
10.96” x 7.03” x 11.26”
(1) M282
4Ω
100 Watts
200 Watts
13.25” x 9.06” x 13.09”
(1) M282B
4Ω
100 Watts
200 Watts
13.25” x 9.06” x 13.09”
*Availability TBD
105 2012 BUYERS GUIDE SPEAKERS SPECIFICATIONS/FEATURES
Crossover
Terminal
Connectors
Accessories
1”(25mm) mylar balanced dome
Integrated high-pass crossover
Standard spade connector
18 Ga. Pigtail
Flush, surface and angle mounting
hardware
1/2”(13mm) pole mounted mylar balanced
dome
Standard spade connector
1”(25mm) bridge mounted coated
aluminum alloy dome tweeter
polarized input terminals w/ a
spare terminal set for optional
additional tweeters
Removable Centrex® trim ring
w/ 18 gauge corrosion resistant
integrated/removable stainless steel
grille and mounting hardware
Injection molded 100%
Ultraviolet stable Centrex®
Tweeter
Motor
Cover
Motor
Structure

2012 Rockford Fosgate

Transcription

Similar documents

Rockford - Davis Distribution

E12NEO-X