- WE-EF

WE-EF LIGHTING
North American Edition
2014-2016
Wall Luminaires Recessed
CRO200 Series
TRO200 Series
SVO200 Series
SVL200 Series
STO200 Series
STN200 Series
48-49
50-51
52-53
52-53
54-55
56-57
CRO224
TRO259
SVO259
SVL259
STO209
STN204
CRO234
LED
LED
LED
STO259
STN254
STO279
LED
HID
LED
46
WALL LUMINAIRES RECESSED
STG200 Series
STX200 Series
STL200 Series
STP200 Series
STI200 Series
QRO300 Series
QRI300 Series
58-59
60-61
62-63
64-65
66-67
68-69
70-71
STG209
STX209
STL209
STP204
STI254
QRO359
QRI354
STG259
STX259
STL259
STP254
STI274
LED
LED
STG279
LED
LED
LED
LED
LED
47
CRO200 SERIES
Recessed wall luminaire. IP65. Body constructed from marine-grade, die-cast aluminum.
Lens frame constructed from die-cast aluminum or stainless steel, including PCS hardware. Natural stainless steel, or powdercoat finish in black RAL 9004, grey metallic
RAL 9007 or white RAL 9016. Specify finish. Consult WE-EF color chart for other options.
Silicone rubber gasket. Clear tempered glass lens with linear prisms and internal white
ceramic mask.
Light source:
CMH 20-39 W
Beam distribution:
'Forward throw'
Accessories:
n
Optical, page 49
UL, cUL:
Two versions available for cavity wall construction or concrete pour installations.
Suitable for through-wiring installations.
Integral [ECG] electronic MH ballast in 120 or 277 volt. Specify voltage.
Marine Hall Gardens. Fleetwood (UK). Landscape architect and Lighting designer: BCA Landscape.
48
n
Suitable for wet locations
ADA compliant.
Ordering guide:
Specify 7 digit part ID together with voltage and finish.
Example: 618-6643 – 120 V – Black RAL 9004
CRO224
CRO224
Stainless steel
'Forward throw' – Cavity wall
Part ID
Light source
CRO224
618-6643
CMH20/T-4/G-8.5 base
1650
1.00
CRO224 SS*
618-6943
CMH20/T-4/G-8.5 base
1650
1.00
8.4
CRO234
618-7643
CMH39/T-4/G-8.5 base
3400
2.06
11.5
CRO234 SS*
618-7943
CMH39/T-4/G-8.5 base
3400
2.06
11.5
'Forward throw' – Concrete pour
lm
lbs
8.4
Part ID
Light source
CRO224
618-6443
CMH20/T-4/G-8.5 base
1650
1.00
8.4
CRO224 SS*
618-6543
CMH20/T-4/G-8.5 base
1650
1.00
8.4
CRO234
618-7443
CMH39/T-5/G-8.5 base
3400
2.06
11.5
CRO234 SS*
618-7543
CMH39/T-5/G-8.5 base
3400
2.06
11.5
10
lm
Factor**
Factor**
lbs
ø 6.69
5.51
ø 7.68
0.39
CRO224
H: 1,5 ft
5
0
2 1 0,5 0,2 0,1 fc
ø 8.19
5
10
ft
5
10
15
20
'Forward throw'
7.87
ø 9.06
CRO234
Accessories:
Dichroic color filters
Red
Green
Blue
Yellow
for CRO224
618-8115
618-8116
618-8117
618-8118
for CRO234
618-8119
618-8120
618-8121
618-8122
* Natural stainless steel finish.
** Multiplier for footcandle value.
0.59
49
TRO200 SERIES
Recessed wall luminaire for orientation. IP55. Body and lens frame constructed from
marine-grade, die-cast aluminum including PCS hardware. Powdercoat finish in black
Light source:
LED 12 W, 3000 K
(for 4000 K, refer to www.we-ef.com)
RAL 9004, grey metallic RAL 9007 or white RAL 9016. Specify finish. Consult WE-EF
color chart for other options. Opal polycarbonate lens. Silicone rubber gasket.
Beam distribution:
Diffused
Suitable for cavity wall construction and through-wiring installations. Refer to mounting
Accessories:
accessories for optional installation blockouts for concrete pour installations.
n
Integral [ECG] electronic LED driver in 120 or 277 volt. Specify voltage.
Mounting, page 51
UL, cUL:
n
Suitable for wet locations
ADA compliant.
50
Ordering guide:
Specify 7 digit part ID together with voltage and finish.
Example: 618-4622 – 120 V – Black RAL 9004
Diffused
Part ID
Light source
K
lm*
lbs
TRO259
618-4622
LED-FT 12W
3000
1400
4.7
10
H: 3,0 ft
5
1 0,5 0,2 0,1 0,05 fc
0
5
ø 10.31
10
ft
5
10
15
20
Diffused
Accessories:
Installation blockout – Luminaire frame proud of building surface.
for TRO259
618-9395
BTR25-I-RE
C
5.0"
Optional mounting accessories for concrete pour installations.
BTR25-I-RE
* Nominal lumen output based on LED manufacturers data at 25°C Tc. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com.
51
SVO200/SVL200 SERIES
Recessed vertical steplight for orientation. IP55. Body constructed from marine-grade,
die-cast aluminum. Lens frame constructed from marine-grade, die-cast aluminum or
Light source:
LED 6 W, 3000 K
(for 4000 K, refer to www.we-ef.com)
stainless steel, including PCS hardware. Natural stainless steel, or powdercoat finish in
black RAL 9004, grey metallic RAL 9007 or white RAL 9016. Specify finish. Consult
Beam distribution:
Diffused
WE-EF color chart for other options. Opal polycarbonate lens. Silicone rubber gasket.
Accessories:
Suitable for cavity wall construction and through-wiring installations. Refer to mounting
accessories for optional installation blockouts for concrete pour installations.
n
Mounting, page 53
UL, cUL:
n
Suitable for wet locations
Integral [ECG] electronic LED driver in 120 or 277 volt. Specify voltage.
ADA compliant.
Hafenpromenade. Eckernförde (D). Landscape architect: Seebauer Wefers und Partner.
52
Ordering guide:
Specify 7 digit part ID together with voltage and finish.
Example: 615-3621 – 120 V – Black RAL 9004
SVO259
SVO259
SVL259
Stainless steel
Diffused
Part ID
Light source
SVO259
615-3621
6 LED 6W/350 mA
3000
756
2.4
SVO259 SS*
615-3627
6 LED 6W/350 mA
3000
756
2.4
Diffused
Part ID
Light source
SVL259
615-3421
6 LED 6W/350 mA
10
H: 1,5 ft
6
5
0
lm**
K
lm**
3000
756
lbs
9.84
SVO259
0
9.25 x 2.99
lbs
2.6
3.94
3.62
H: 1,5 ft
0.32
3
0,5 0,2 0,1 0,05 0,02 0,010 fc
5
0,5 0,1 0,05 0,02 0,010 fc
3
10
ft
K
6
5
10
15
20
Diffused – SVO
ft
3
6
9
12
Diffused – SVL
9.84
SVL259
3.62
9.25 x 2.99
3.94
0.32
Accessories:
Installation blockout – Luminaire frame proud of building surface.
for SVO259/SVL259
615-9325
C
BST25-I
5.1"
Optional mounting accessories for concrete pour installations.
BST25-I
* Natural stainless steel finish.
** Nominal lumen output based on LED manufacturers data at 85°C Tj. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com.
53
STO200 SERIES
Recessed steplight for orientation. STO209/259: IP55. STO279: IP66. Body constructed
from marine-grade, die-cast aluminum. Lens frame constructed from marine-grade, die-
Light source:
LED 4-9 W, 3000 K
(for 4000 K, refer to www.we-ef.com)
cast aluminum or stainless steel, including PCS hardware. Natural stainless steel, or
powdercoat finish in black RAL 9004, grey metallic RAL 9007 or white RAL 9016. Specify
Beam distribution:
Diffused
finish. Consult WE-EF color chart for other options. Opal polycarbonate lens. Silicone
rubber gasket.
Accessories:
n
Mounting, page 55
Suitable for cavity wall construction and through-wiring installations. Refer to mounting
UL, cUL:
accessories for optional installation blockouts for concrete pour installations.
n
Integral [ECG] electronic LED driver in 120 or 277 volt. Specify voltage.
Drift Park. Rhyl, North Wales (UK). Landscape architect: Brock Carmichael Landscape Architects.
54
Suitable for wet locations
ADA compliant.
Ordering guide:
Specify 7 digit part ID together with voltage and finish.
Example: 615-0621 – 120 V – Black RAL 9004
STO259
STO259
stainless steel
Diffused
Part ID
Light source
STO209
615-0621
4 LED 4W/350 mA
3000
504
0.67
2.0
STO209 SS*
615-0627
4 LED 4W/350 mA
3000
504
0.67
2.0
STO259
615-1621
6 LED 6W/350 mA
3000
756
1.00
2.6
STO259 SS*
615-1627
6 LED 6W/350 mA
3000
756
1.00
2.6
8.07
STO279
615-6621
9 LED 9W/350 mA
3000
1134
1.50
5.1
STO209
STO279 SS*
615-6627
9 LED 9W/350 mA
3000
1134
1.50
5.1
10
K
lm**
Factor***
lbs
3.62
3.94
0.32
H: 1,5 ft
3.62
5
0
7.48 x 2.99
9.25 x 2.99
0,5 0,2 0,1 0,05 0,02 0,010 fc
5
9.84
10
ft
5
10
15
3.94
0.32
20
STO259
Diffused
5.32
Accessories:
16.3 x 5.0
16.73
Installation blockout – Luminaire frame proud of building surface.
for STO209
615-9320
BST20-I
5.1"
for STO259
615-9325
BST25-I
5.1"
for STO279
615-9327
BST27-I
5.2"
3.94
0.51
C
STO279
Optional mounting accessories for concrete pour installations.
BST-I
* Natural stainless steel finish.
** Nominal lumen output based on LED manufacturers data at 85°C Tj. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com.
*** Multiplier for footcandle value.
55
STN200 SERIES
Recessed steplight for orientation. IP55. Body and lens frame constructed from marinegrade, die-cast aluminum including PCS hardware. Powdercoat finish in black RAL 9004,
Light source:
LED 4-6 W, 3000 K
(for 4000 K, refer to www.we-ef.com)
grey metallic RAL 9007 or white RAL 9016. Specify finish. Consult WE-EF color chart for
other options. Prismatic polycarbonate lens. Silicone rubber gasket.
Beam distribution:
'Forward throw'
Suitable for cavity wall construction and through-wiring installations. Refer to mounting
Accessories:
accessories for optional installation blockouts for concrete pour installations.
n
Integral [ECG] electronic LED driver in 120 or 277 volt. Specify voltage.
Mounting, page 57
UL, cUL:
n
Suitable for wet locations
ADA compliant.
56
Ordering guide:
Specify 7 digit part ID together with voltage and finish.
Example: 615-0521 – 120 V – Black RAL 9004
'Forward throw'
Part ID
Light source
K
lm*
STN204
615-0521
4 LED 4W/350 mA
3000
504
0.67
2.0
STN254
615-1521
6 LED 6W/350 mA
3000
756
1.00
2.6
10
Factor**
lbs
3.62
3.94
8.07
H: 1,5 ft
5
0
7.48 x 2.99
STN204
0.71
0,5 0,2 0,1 0,05 0,02 fc
5
10
ft
5
10
15
3.62
20
9.25 x 2.99
'Forward throw'
9.84
3.94
0.71
STN254
Accessories:
Installation blockout – Luminaire frame proud of building surface.
C
for STN204
615-9320
BST20-I
5.1"
for STN254
615-9325
BST25-I
5.1"
Optional mounting accessories for concrete pour installations.
BST-I
* Nominal lumen output based on LED manufacturers data at 85°C Tj. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com.
** Multiplier for footcandle value.
57
STG200 SERIES
Recessed steplight for orientation. IP55. Body constructed from marine-grade, die-cast
aluminum. Lens frame constructed from marine-grade, die-cast aluminum or stainless
Light source:
LED 4-9 W, 3000 K
(for 4000 K, refer to www.we-ef.com)
steel, including PCS hardware. Natural stainless steel, or powdercoat finish in black
RAL 9004, grey metallic RAL 9007 or white RAL 9016. Specify finish. Consult WE-EF color
Beam distribution:
Diffused
chart for other options. Opal polycarbonate lens. Silicone rubber gasket.
Accessories:
Suitable for cavity wall construction and through-wiring installations. Refer to mounting
accessories for optional installation blockouts for concrete pour installations.
n
Mounting, page 59
UL, cUL:
n
Suitable for wet locations
Integral [ECG] electronic LED driver in 120 or 277 volt. Specify voltage.
ADA compliant.
Place Camille. Camagnole (F).
58
Ordering guide:
Specify 7 digit part ID together with voltage and finish.
Example: 615-0221 – 120 V – Black RAL 9004
STG259
STG259
Stainless steel
Diffused
Part ID
Light source
STG209
615-0221
4 LED 4W/350 mA
3000
504
0.67
2.2
STG209 SS*
615-0227
4 LED 4W/350 mA
3000
504
0.67
2.2
STG259
615-1221
6 LED 6W/350 mA
3000
756
1.00
2.9
STG259 SS*
615-1227
6 LED 6W/350 mA
3000
756
1.00
2.9
8.07
STG279
615-6221
9 LED 9W/350 mA
3000
1134
1.50
6.6
STG209
STG279 SS*
615-6223
9 LED 9W/350 mA
3000
1134
1.50
8.8
6
K
lm**
Factor***
lbs
3.62
3.94
0.32
H: 1,5 ft
3.62
3
0
7.48 x 2.99
9.25 x 2.99
1 0,5 0,2 0,1 0,05 0,02 fc
3
3.94
9.84
6
ft
3
6
9
0.32
12
STG259
Diffused
5.31
Accessories:
16.3 x 5.0
16.73
Installation blockout – Luminaire frame proud of building surface.
for STG209
615-9320
BST20-I
5.1"
for STG259
615-9325
BST25-I
5.1"
for STG279
615-9327
BST27-I
5.2"
3.94
0.51
C
STG279
Optional mounting accessories for concrete pour installations.
BST-I
* Natural stainless steel finish.
** Nominal lumen output based on LED manufacturers data at 85°C Tj. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com.
*** Multiplier for footcandle value.
59
STX200 SERIES
Recessed steplight for orientation. IP55. Body and lens frame constructed from marinegrade, die-cast aluminum including PCS hardware. Powdercoat finish in black RAL 9004,
Light source:
LED 4-6 W, 3000 K
(for 4000 K, refer to www.we-ef.com)
grey metallic RAL 9007 or white RAL 9016. Specify finish. Consult WE-EF color chart for
other options. Opal polycarbonate lens. Silicone rubber gasket.
Beam distribution:
Diffused
Suitable for cavity wall construction and through-wiring installations. Refer to mounting
Accessories:
accessories for optional installation blockouts for concrete pour installations.
n
Integral [ECG] electronic LED driver in 120 or 277 volt. Specify voltage.
Mounting, page 61
UL, cUL:
n
Suitable for wet locations
ADA compliant.
Thai Nichi Institute of Technology. Bangkok (TH).
60
Ordering guide:
Specify 7 digit part ID together with voltage and finish.
Example: 615-4222 – 120 V – Black RAL 9004
Diffused
Part ID
Light source
K
lm*
STX209
615-4222
4 LED 4W/350 mA
3000
504
0.67
2.2
STX259
615-5221
6 LED 6W/350 mA
3000
756
1.00
2.9
6
Factor**
lbs
3.62
3.94
8.07
H: 1,5 ft
0.71
3
0
7.48 x 2.99
STX209
1 0,5 0,2 0,1 0,05 0,02 fc
3
6
ft
3
6
9
3.62
12
9.25 x 2.99
Diffused
9.84
3.94
0.71
STX259
Accessories:
Installation blockout – Luminaire frame proud of building surface.
C
for STX209
615-9320
BST20-I
5.1"
for STX259
615-9325
BST25-I
5.1"
Optional mounting accessories for concrete pour installations.
BST-I
* Nominal lumen output based on LED manufacturers data at 85°C Tj. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com.
** Multiplier for footcandle value.
61
STL200 SERIES
Recessed steplight for orientation. IP55. Body and lens frame constructed from marinegrade, die-cast aluminum including PCS hardware. Powdercoat finish in black RAL 9004,
Light source:
LED 4-6 W, 3000 K
(for 4000 K, refer to www.we-ef.com)
grey metallic RAL 9007 or white RAL 9016. Specify finish. Consult WE-EF color chart for
other options. Opal polycarbonate lens. Silicone rubber gasket.
Beam distribution:
Diffused
Suitable for cavity wall construction and through-wiring installations. Refer to mounting
Accessories:
accessories for optional installation blockouts for concrete pour installations.
n
Integral [ECG] electronic LED driver in 120 or 277 volt. Specify voltage.
Mounting, page 63
UL, cUL:
n
Suitable for wet locations
ADA compliant.
The 2008 Serpentine Gallery Pavilion. London (UK). Architect: Frank Gehry. Lighting Design: ARUP Lighting.
62
Ordering guide:
Specify 7 digit part ID together with voltage and finish.
Example: 615-0421 – 120 V – Black RAL 9004
Diffused
Part ID
Light source
K
lm*
STL209
615-0421
4 LED 4W/350 mA
3000
504
0.67
2.2
STL259
615-1421
6 LED 6W/350 mA
3000
756
1.00
2.9
6
Factor**
lbs
3.62
3.94
8.07
H: 1,5 ft
0.32
3
0
7.48 x 2.99
STL209
0,5 0,2 0,05 0,02 0,010 fc
3
6
ft
3
6
9
3.62
12
9.25 x 2.99
Diffused
9.84
3.94
0.32
STL259
Accessories:
Installation blockout – Luminaire frame proud of building surface.
C
for STL209
615-9320
BST20-I
5.1"
for STL259
615-9325
BST25-I
5.1"
Optional mounting accessories for concrete pour installations.
BST-I
* Nominal lumen output based on LED manufacturers data at 85°C Tj. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com.
** Multiplier for footcandle value.
63
STP200 SERIES
Recessed steplight. IP55. Body and lens frame constructed from marine-grade, die-cast
aluminum including PCS hardware. Powdercoat finish in black RAL 9004, grey metallic
Light source:
LED 4-6 W, 3000 K
(for 4000 K, refer to www.we-ef.com)
RAL 9007 or white RAL 9016. Specify finish. Consult WE-EF color chart for other options.
Polycarbonate prismatic lens. Silicone rubber gasket.
Beam distribution:
'Forward throw'
Suitable for cavity wall construction and through-wiring installations. Refer to mounting
Accessories:
accessories for optional installation blockouts for concrete pour installations.
n
Integral [ECG] electronic LED driver in 120 or 277 volt. Specify voltage.
Mounting, page 65
UL, cUL:
n
Suitable for wet locations
ADA compliant.
John Curtain School of Medical Research. Canberra (AUS). Architect: Lyons. Lighting Design: Umow Lai & Associates.
64
Ordering guide:
Specify 7 digit part ID together with voltage and finish.
Example: 615-0721 – 120 V – Black RAL 9004
'Forward throw'
Part ID
Light source
K
lm*
STP204
615-0721
4 LED 4W/350 mA
3000
504
0.67
2.0
STP254
615-1721
6 LED 6W/350 mA
3000
756
1.00
2.6
6
Factor**
lbs
3.62
7.48 x 2.99
3.94
8.07
H: 1,5 ft
1.1
3
STP204
0
2 1 0,5 0,2 0,1 0,05 fc
3
6
ft
3
6
9
3.62
12
9.25 x 2.99
'Forward throw'
9.84
3.94
1.1
STP254
Accessories:
Installation blockout – Luminaire frame proud of building surface.
C
for STP204
615-9320
BST20-I
5.1"
for STP254
615-9325
BST25-I
5.1"
Optional mounting accessories for concrete pour installations.
BST-I
* Nominal lumen output based on LED manufacturers data at 85°C Tj. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com.
** Multiplier for footcandle value.
65
STI200 SERIES
Recessed steplight. IP55. Body and lens frame constructed from marine-grade, die-cast
aluminum including PCS hardware. Powdercoat finish in black RAL 9004, grey metallic
Light source:
LED 6-9 W, 3000 K
(for 4000 K, refer to www.we-ef.com)
RAL 9007 or white RAL 9016. Specify finish. Consult WE-EF color chart for other options.
Polycarbonate lens. Silicone rubber gasket.
Beam distribution:
'Forward throw'
Suitable for cavity wall construction and through-wiring installations. Refer to mounting
Accessories:
accessories for optional installation blockouts for concrete pour installations.
n
Integral [ECG] electronic LED driver in 120 or 277 volt. Specify voltage.
Mounting, page 67
UL, cUL:
n
Suitable for wet locations
ADA compliant.
Sun Plaza Shopping Mall. Bucarest (RO). Architect: Chapman Taylor. Lighting design: Scott Beleuchtung.
66
Ordering guide:
Specify 7 digit part ID together with voltage and finish.
Example: 615-1321 – 120 V – Black RAL 9004
'Forward throw'
Part ID
Light source
K
lm*
STI254
615-1321
6 LED 6W/350 mA
3000
756
1.00
2.6
STI274
615-6321
9 LED 9W/350 mA
3000
1134
1.50
6.6
10
Factor**
lbs
3.62
9.84
H: 1,5 ft
3.94
0.31
5
0
9.25 x 2.99
STI254
0,5 0,2 0,1 0,05 0,02 fc
5
10
ft
5
10
15
20
5.32
16.3 x 5.0
'Forward throw'
3.94
16.73
0.51
Accessories:
STI274
Installation blockout – Luminaire frame proud of building surface.
C
for STI254
615-9325
BST25-I
5.1"
for STI274
615-9327
BST27-I
5.2"
Optional mounting accessories for concrete pour installations.
BST-I
* Nominal lumen output based on LED manufacturers data at 85°C Tj. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com.
** Multiplier for footcandle value.
67
QRO300 SERIES
Recessed wall luminaire for orientation. IP55. Body constructed from marine-grade, diecast aluminum. Lens frame constructed from marine-grade, die-cast aluminum or stain-
Light source:
LED 12 W, 3000 K
(for 4000 K, refer to www.we-ef.com)
less steel, including PCS hardware. Natural stainless steel, or powdercoat finish in black
RAL 9004, grey metallic RAL 9007 or white RAL 9016. Specify finish. Consult WE-EF color
Beam distribution:
Diffused
chart for other options. Opal polycarbonate lens. Silicone rubber gasket.
Accessories:
Suitable for cavity wall construction and through-wiring installations. Refer to mounting
accessories for optional installation blockouts for concrete pour installations.
n
Mounting, page 69
UL, cUL:
n
Suitable for wet locations
Integral [ECG] electronic LED driver in 120 or 277 volt. Specify voltage.
ADA compliant.
Bahnhof Berlin Südkreuz. Berlin (D). Architect: J.S.K. GmbH. Lighting design: DE Consult.
68
Ordering guide:
Specify 7 digit part ID together with voltage and finish.
Example: 616-1622 – 120 V – Black RAL 9004
QRO359
QRO359
stainless steel
Diffused
Part ID
Light source
K
QRO359
616-1622
LED-FT 12W
3000
1400
7.1
QRO359 SS*
616-1623
LED-FT 12W
3000
1400
7.1
10
lm**
lbs
H: 3,0 ft
5
0
2 1 0,5 0,2 0,1 0,05 fc
ø 10.31
5
10
ft
5
10
15
20
Diffused
Accessories:
Installation blockout – Luminaire frame proud of building surface.
for QRO359
616-9319
C
BQR25-I-RE
5.0"
Optional mounting accessories for concrete pour installations.
BQR25-I-RE
* Natural stainless steel finish.
** Nominal lumen output based on LED manufacturers data at 25°C Tc. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com.
69
QRI300 SERIES
Recessed wall luminaire. IP55. Body and lens frame constructed from marine-grade, diecast aluminum including PCS hardware. Powdercoat finish in black RAL 9004, grey
Light source:
LED 6 W, 3000 K
(for 4000 K, refer to www.we-ef.com)
metallic RAL 9007 or white RAL 9016. Specify finish. Consult WE-EF color chart for
other options. Tempered glass lens. Silicone rubber gasket.
Beam distribution:
'Forward throw'
Suitable for cavity wall construction and through-wiring installations. Refer to mounting
Accessories:
accessories for optional installation blockouts for concrete pour installations.
n
Integral [ECG] electronic LED driver in 120 or 277 volt. Specify voltage.
Mounting, page 71
UL, cUL:
n
Suitable for wet locations
ADA compliant.
John Curtain School of Medical Research. Canberra (AUS). Architect: Lyons. Lighting design: Umow Lai & Associates.
70
Ordering guide:
Specify 7 digit part ID together with voltage and finish.
Example: 616-1321 – 120 V – Black RAL 9004
'Forward throw'
QRI354
6
Part ID
Light source
616-1321
6 LED 6W/350 mA
K
lm*
lbs
3000
756
7.1
H: 3,0 ft
3
5 2 1 0,5
0
0,2 fc
3
10.31
6
ft
3
6
9
12
'Forward throw'
Accessories:
Installation blockout – Luminaire frame proud of building surface.
QRI354
616-9319
C
BQR25-I-RE
5.0"
Optional mounting accessories for concrete pour installations.
BQR25-I-RE
* Nominal lumen output based on LED manufacturers data at 85°C Tj. For rated lumens at 25°C Tq and latest data, refer to www.we-ef.com.
71
WE-EF LIGHTING USA LLC
410-D Keystone Drive
Warrendale PA 15086
U.S.A.
Tel +1 724 742 0030
Fax +1 724 742 0035
[email protected]
www.we-ef.com