Quick Index Of Illustrated Parts
Transcription
Quick Index Of Illustrated Parts
Quick Index of Illustrated Parts Notes: 1. See Page 22 for information about Exchange and Repair Programs. 2. See Appendix A at the back of this Parts List for a complete list of parts not illustrated. 3. See Back Cover of this Parts List for a complete alphanumeric index. 00 Superior Tile Cutter ...................................... 18 00-400 Superior Tile Cutter .............................. 18 030X Crain Tile Cutter ...................................... 19 032X Crain Tile Cutter ...................................... 19 033X Crain Tile Cutter ...................................... 19 045X Super Tile Cutter ..................................... 19 100-LR Linoleum Roller .................................... 12 104 Tackless Strip Cutter .................................. 16 106-xx Divider .................................................. 15 107 Mini-Stretcher ............................................ 11 107-SRA Seam Repair Attachment .................. 11 108-xx Divider .................................................. 15 15 Linoleum Dolly ............................................... 8 150-LR Linoleum Roller .................................... 12 177-FB, 177-GB Hot Melt Irons .......................... 2 182-FB, 182-GB Hot Melt Irons .......................... 3 196-CCC Cushion Back Trimmer ....................... 5 1A Superior Tile Cutter ..................................... 18 1A-400 Superior Tile Cutter .............................. 18 1AA Superior Tile Cutter ................................... 18 205C Divider .................................................... 15 206C Divider .................................................... 15 214 Carpet Kicker ............................................. 10 222-AR Airway Roller ......................................... 1 245 Carpet Trimmer ............................................ 4 246 Carpet Trimmer ............................................ 4 25 Linoleum Dolly ............................................... 8 2822 Uni-Lift Mover ............................................ 8 2A Superior Tile Cutter ..................................... 18 2A-400 Superior Tile Cutter .............................. 18 2AA Superior Tile Cutter ................................... 18 3-400 Superior Tile Cutter ................................ 18 333-AR Extension Handle Roller ........................ 1 338 Universal Cutting Tool ................................ 16 375 Big Scraper .................................................. 1 375S Big Scraper ............................................... 1 377-FB, 377-GB Hot Melt Irons .......................... 3 4-400 Superior Tile Cutter ................................ 18 400-CS Carpet Stretcher .................................... 9 4AA Superior Tile Cutter ................................... 18 677-GB Hot Melt Iron ......................................... 3 716 Carpet Trimmer ............................................ 4 75-LR Linoleum Roller ...................................... 12 750-A Heat Gun ................................................. 2 800, 800V Super Saws ....................................... 6 810, 810V Super Saws ....................................... 6 848 Carpet Crane ............................................... 8 950 Measuring Wand ........................................ 16 951 Standup Cutter ............................................ 5 973-BP Cove Base Gun ................................... 15 974 Cove Base Gun ......................................... 15 B-91 Propane Blow Torch ................................... 7 B-91T Propane Blow Torch ................................. 7 CT-1R Clinker Tile Cutter .................................. 20 H-24 24" Tile Cutter .......................................... 14 H-76-1 Floor Tile Cutter (with Casters) ............. 14 H-76-2 Floor Tile Cutter (without Casters) ........ 14 H2B Staple Hammer ........................................ 13 H2B-1/2 Staple Hammer .................................. 13 JTS Gundlach Junior Tile Saw ......................... 17 KT-150 Carpet Stretcher ..................................... 9 KT-260 Carpet Kicker ....................................... 10 MC-14 Clinker Tile Cutter ................................. 20 MC-500R Clinker Tile Cutter ............................. 20 MC-600R Clinker Tile Cutter ............................. 20 MC-700R Clinker Tile Cutter ............................. 21 R-1 Edge Binding Stapler ................................. 12 R-11 Staple Hammer ........................................ 13 STS Gundlach Senior Tile Saw ........................ 17 P-101 1/4/00 How to Use This Parts List The Quantity Used column indicates the number of parts needed to complete the assembly, not how many parts must be ordered. The units of measure used in this Parts List are pkg (package) and set. If not specified, each is the implied unit of measure. If the column indicates 6 items are used, you may order 1 if that is all you need. If 6 items were used at once, the items would be sold as a package or set, and only 1 need be ordered. Record of Replacement Pages This publication will be updated on a page-by-page basis. Each page is dated. This section records the replacement pages with their previous and current dates. This page will be included in all future updates. Page Number Previous Date Current Date 10 14 20 21 A-3 06/14/99 06/14/99 11/03/99 11/03/99 06/14/99 11/09/99 08/21/99 010/4/00 01/04/00 11/17/99 Gundlach Parts List P-101 Notes: 1. Separate price lists are available for this Parts List. 2. If you do not find an item in this Parts List, it may be listed in the current product catalog. 3. We stock a number of parts for products not listed in this Parts List. If you need a part for a Gundlach product not listed here or in the current product catalog, please contact us for further information. 4. A part shown in this Parts List may not be available due to circumstances that may arise beyond our reasonable control. Table of Contents Quick Index of Illustrated Parts ................................ Front Cover Illustrated Parts List ............................................................ 1–21 Exchange and Repair Programs ............................................. 22 Appendix A. List of Parts Not Illustrated ........................ A-1–A-5 Alphanumeric Index ................................................. Back Cover First Edition (June 14, 1999) Last Update (January 4, 2000) This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in updates to this publication. No parts of this publication may be reproduced by any means without prior written permission from Beno J. Gundlach Company. © Beno J. Gundlach Company 1999. All rights reserved. ii Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. Gundlach Parts List P-101 6/14/99 No. 222-AR Airway Roller Key 1 1 2 3 Item Number Qty. Used 1222-A 1333-B 1333-C 1 1 set 1 Description Casting Roller Set with No. 1333-C Axle with Washers and Nut 3 2 No. 333-AR Extension Handle Roller Key 1 2 3 4 5 6 Item Number Qty. Used 1333-A 1333-B 1333-C 1333-D 1375-G 1333-F 1 1 set 1 1 1 1 Description Casting and Lower Tube Assembly Roller Set with No. 1333-C Axle with Washers and Nut Upper Tube with Grip Grip only Locking Roller with Bolt 1 5 3 4 6 2 No. 375 and No. 375S Big Scrapers 6 4 No. 375S No. 1375-B (see note) 3 Key Item Number Qty. Used 1 1375-A 1 2 3 4 5 6 1375-E 1333-D 1375-G 1333-F 1375-H 1 1 1 1 1 set 5 Description Casting and Lower Tube Assembly (call for availability for No. 375S) Long Upper Tube with Grip Upper Tube with Grip Grip only Locking Roller with Bolt Screws only (4/set) Note: See current product catalog for No. 1375-B Blade Clamp (with 4 Screws), No. 376-3 (3/tube) and No. 376-9 (9/tube) Replacement Blades and No. 8-SC Scraper Cover. Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. No. 375 2 5 1 1 6/14/99 Gundlach Parts List P-101 No. 750-A Electric Heat Gun 18 See Detail A. 8 10 12 13 11 See Note 1. 9 14 15 Detail A 1 6 7 2 7 6 3 16 4 5 17 Key Item Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 — — — 10300 10311 10611 10911 10900 10974 10931 10630 0283479 0283480 0283487 0283488 10602 10604 10701 10330 10939 10606 10722 10723 10724 Qty. Used 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Description Shield Nozzle Nozzle Screen Orifice Plate Nozzle Retaining Ring Lock Washer Screw Rocker Switch Main Housing Housing Cover Handle Grip Half Handle Grip Half Handle (see Note 1) Strain Relief #14 3-Wire Cord Stand Screw Blower Wheel Wire Lead, Terminals Both Ends Wire Lead, One End Stripped Short Jumper Wire Notes: 1. If your handle looks like this, it must be replaced with the same part, No. 10602. All parts above, except keys 9–12, are compatable with your heat gun. 2. See current product catalog for No. 755-K Replacement Heat Element Kit for No. 750-A Electric Heat Gun. 3. See current product catalog for a list of heating elements available for discontinued heat gun models. 4. For other parts for discontinued heat gun models, see the parts list supplied with the heat gun. No. 177-FB and No. 177-GB Hot Melt Irons Key The Nos. 177-FB and 177-GB Hot Melt Irons have been discontinued. However, most parts are available. 1 2 7 10 Item Number Qty. Used 1 10-177-01 1 set 2 3 10-177-02 10-177-03 1 1 4 5 10-177-04 10-177-05 1 1 5 10-177G-05* 1 6 7 10-177-06 10-177-07 1 1 8 9 10-177-08 10-177-09 1 1 10 10-177-10 1 set 11 — 10-177-11 10-177-12 1 1 Description Handle Parts with 5 Screws (No. 10-177-10) Cord Set with Ground Screw Thermostat with Screw, Lock Washer Handle Mount with 2 Screws Flat Sole Plate with 2 Crimp Connectors Grooved Sole Plate with 2 Crimp Connectors Iron Holder Internal Wire Set with 2 Crimp Connectors Calibration Knob Heat Shield with Screw (No. 10-177-11) Screws for Handle Parts (4 short and 1 long) Heat Shield Screw Fused Wire Assembly 8 4 Note: Item Numbers with an asterisk (*) are no longer in stock. 5 10 9 6 11 3 2 Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. Gundlach Parts List P-101 6/14/99 Nos. 182-FB, 182-GB, 377-FB, and 377-GB Hot Melt Irons Key 1 2 9 10 12 11 3 13 4 Qty. Used 1 377-01 1 set 2 3 4 5 377-02 377-03 377-04 377-05 1 1 1 1 6 377-06 1 7 8 10-182-05 10-182-06 1 1 9 10 11 12 13 14 15 — — — 377-07 377-08 377-09 377-10 377-11 377-12 10-177-06 377-13 377-14 377-15 1 1 1 1 1 1 1 1 1 set 1 set Description Handle Parts with 7 Screws (No. 377-14) Cord Set with Spring and Connector Thermostat with Extension Post Top Sole Plate with 5 Screws Flat Teflon Bottom Sole Plate with 5 Screws Grooved Teflon Bottom Sole Plate with 5 Screws Flat Bottom Sole Plate with 5 Screws Grooved Bottom Sole Plate with 5 Screws Internal Wire Set (includes No. 377-13) Calibration Knob Heat Shield with 3 Screws Gasket for Handle Mount Gasket Above Sole Plate Heating Element Iron Holder Fused Wire Assembly Handle Screws (3 long and 4 short) Screws (5/set, for keys 4, 5, 6, 7, 8 and 11) Note: See Page 22 for the Hot Melt Iron Exchange Program. 14 5 Item Number 6 7 8 15 No. 677-GB Hot Melt Iron Key 1 2 7 8 10 9 Item Number Qty. Used 1 377-01 1 set 2 3 4 377-02 677-GB-03 677-GB-04 1 1 1 6 7 677-GB-06 677-GB-07 1 1 8 9 10 11 12 13 — — 377-08 677-GB-09 377-10 677-GB-11 377-12 677-GB-14 377-14 677-GB-13 1 1 1 1 1 1 1 set 1 Description Handle Parts with 7 Screws (No. 377-14) Cord Set with Spring and Connector Thermostat with Extension Post Top Sole Plate with 5 Screws and Washers Grooved Teflon Bottom Sole Plate Internal Wire Set (includes No. 677-GB-13) Calibration Knob Heat Shield with 3 Screws Gasket for Handle Mount Gasket Above Sole Plate Heating Element Iron Holder Handle Screws (3 long and 4 short) Fused Wire Assembly Note: See Page 22 for the Hot Melt Iron Exchange Program. 3 11 4 12 6 13 Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. 3 6/14/99 Gundlach Parts List P-101 No. 245 Conventional Back Carpet Trimmer 2 11 8 3 5 7 10 Key Item Number 1 2 3 4 5 6 7 8 9 10 11 1245-A 1245-B 1245-D 1245-E 1245-G 1245-H 1245-K 1245-L 1245-M 1245-N 1245-S Qty. Used 1 1 1 set 1 1 1 1 1 1 set 1 1 Description Mounting Bracket Ratchet Handle 3-Arm Knob (3/set) Base Wall Runner False Bottom Assembly Left Blade Holder Right Blade Holder Shim Set (4/set) Plastic Wall Protector Bolt Note: See current product catalog for No. G-640-10 (10/tube) and No. G-642-C (100/box) Universal Carpet Trimmer Blades. 9 1 4 3 6 No. 246 Conventional Back Carpet Trimmer 1 10 6 3 5 8 7 Key Item Number 1 2 3 4 5 6 7 8 9 10 1246-A 1245-E 1245-G 1245-H 1245-K 1245-L 1245-M 1245-N 1246-P 1246-R Qty. Used 1 1 1 1 1 1 1 set 1 1 set 1 set Description Wooden Handle Base Wall Runner False Bottom Assembly Left Blade Holder Right Blade Holder Shim Set (4/set) Plastic Wall Protector Handle Screws (2/set) Knurled Knob Set (2/set) Note: See current product catalog for No. G-640-10 (10/tube) and No. G-642-C (100/box) Universal Carpet Trimmer Blades. 2 4 9 No. 716 Conventional Back Carpet Trimmer Key 2 12 3 3 4 9 8 7 5 10 11 Item Number Qty. Used 1 2 3 4 5 6 7 716-01 716-02 716-03 716-04 716-05 716-06 716-07 1 1 2 pkg 1 1 set 1 1 8 9 10 11 12 716-08 716-09 716-10 716-11 716-12 1 1 1 1 1 Description Plastic Wall Protector Handle Bolt Knobs (2/package) Name Plate Spacers (6/set) Black Spacer Blade Guide (includes Nos. 716-01 and 716-08) Blade Clip and Rivet Locking Plate Mounting Bracket with 2 Screws Base Plate Ratchet Handle Note: See current product catalog for No. G-640-10 (10/tube) and No. G-642-C (100/box) Universal Carpet Trimmer Blades. 6 1 4 Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. Gundlach Parts List P-101 6/14/99 No. 196-CCC Cushion Back Trimmer The No. 196-CCC Cushion Back Trimmer has been discontinued. However, most parts are available. 1 2 3 4 5 6 7 8 3 2 6 Key Item Number 1196-A 1196-B 1196-C 1196-D 1196-E 1196-F 1196-G 1196-H Qty. Used 1 1 1 1 1 2 1 3 Description Base and Screws Handle Height Adjuster Right Blade Clamp Left Blade Clamp Blade Clamp Wing Nut Handle Wing Nut Socket Set Screw 4 7 1 5 8 No. 951 Standup Cutter 14 1 Note: No. 951-J Button Head Screws and Lock Nuts may be used in place of rivets to assemble the rails. 2 8 12 5 3 13 4 10 7 11 9 Key Item Number Qty. Used 1 2 3 4 5 6 7 8 8 951-A1 951-A2 951-A3 951-A4 951-B 951-C 951-D 951-E 951-J 1 1 1 1 1 1 1 5 5 9 10 11 12 13 14 — 951-F 951-G 951-H 951-K 951-L 951-M 951-A 1 1 1 1 1 1 1 Description Upper Right Hand Rail Upper Left Hand Rail Lower Right Hand Rail Lower Left Hand Rail Handle Rear Bearing Assembly Blade Holding Screw Rivet (see note) Button Head Screw and Lock Nut (see note) Blue Steel Divider Plate Spacer Threaded Press Nut Tension Spring Bolt, Washer and Wing Nut Bolt, Washers and Wing Nut Standup Cutter Assembly (includes all parts above except No. 951-B Handle) 6 Bearing and bushing are supplied as a joined unit. Replacement assembly includes a bolt, lock washer and nut. See current product catalog for No. 953-5 Replacement Double-Bevel Blades (5/package). Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. 5 6/14/99 Gundlach Parts List P-101 No. 800 and No. 800V Super Saws The Nos. 800 and 800V Super Saws have been discontinued. However, most parts are available. Key Item Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 14 15 16 17 18 — — — — — — 1800-A 1800-B 1800-C 1800-D 1800-E 1800-F 1800-G 1800-N 1800-K 1800-L 1800-T 1800-U 1800-V 1800-W 1800-WV 1800-H 1800-Z 1801-A 1800-X 1800-O 1800-P 1800-Y 1801-B 1801-C 1801-D 14 17 18 2 3 4 10 11 1 6 15 7 See Note 1. 16 8 5 805 803 9 See Note 2. 12 13 Qty. Used Description 1 1 set 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 set 1 set 1 1 1 Blade Guard Washer, Bolt and Wing Nut (3 each/set) Horseshoe Height Adjuster Blade Driver Assembly (see Note 1) Depth Gauge Assembly Masonry Blade Spacer Blade Driver Spacer (see Note 1) Masonry Blade Clamp Blade Guard Spring Blade Guard Stop with Screw Socket Set Screw 3/16" Short Arm Hex Key 120V Power Unit (see Note 3) 220V Power Unit (see Note 3) Spring Retainer Ring Welded Blade Driver/Spacer (see Note 1) Trigger Switch 120V Cord with Plug 2-Piece Carrying Case Carrying Case Latches (2/set) Brush Set (2/set) 120V Armature Assembly Gear Cover with Bushing Spindle and Gear Assembly Notes: 1. No. 1800-Z Welded Blade Driver and Spacer is a welded combination part that can replace No. 1800-E Blade Driver Assembly and No. 1800-N Spacer. No. 1800-Z (used in saws produced since 5/95) creates greater bearing surface for reduced blade wobble and spindle wear. 2. See current product catalog for No. 803 Combination Steel Blade, No. 804 Carbide Tipped Steel Blade, and No. 805 Masonry Blade. 3. For parts not listed or service, contact your local Black & Decker (U.S.) Inc. Service Center, or call their Consumer Hot Line at TEL: 800 762-6672. It is helpful to be aware of the following: a. 120V Power Units produced prior to 1/95 are Black & Decker Model 7308, Type 5. b. 120V Power Units produced 1/95 and after are Black & Decker Model 7359, Type 2. c. 220V Power Units are Black & Decker Model 7308-01, Type 6. No. 810 and No. 810V Super Saws 1 Key 18 17 7 4 5 2 8 6 8 20 19 10 11 9 12 13 16 14 15 805 21 803 22 23 6 3 Item Number Qty. Used Description 1 1810-A 1 120V Power Unit 2 1810-B 1 set Guide Washers (3/set) 3 1810-C 1 set Guide Washer Springs (3/set) 4 1810-D 1 set Wing Nut and Washer (3 each/set) 5 1810-E 1 Depth Gauge Lock 6 1810-F 1 Depth Gauge Assembly 7 1810-G 1 set Depth Gauge Screw, Washer and Nut 8 1810-H 1 set Carriage Bolts (4/set) 9 1810-I 1 Blade Guard Stop with Screw 10 1810-J 1 Blade Guard Spring 11 1810-K 1 set Horseshoe Screws (3/set) 12 1810-L 1 Blade Guard 13 1810-M 1 Blade Guard Retainer Ring 14 1810-N 1 Blade Driver Spacer 15 1810-O 1 Blade Driver Assembly 16 1810-P 1 Masonry Blade Spacer 17 1810-Q 1 120V Cord with Plug 18 1810-S 1 On/Off Switch 19 1800-C 1 Horseshoe 20 1800-D 1 Height Adjuster 21 1800-K 1 Masonry Blade Clamp 22 1800-U 1 Socket Set Screw 23 1800-V 1 3/16" Short Arm Hex Key — 1800-O 1 2-Piece Carrying Case — 1800-P 1 set Carrying Case Latches (2/set) — 1810-R 1 set Brush Set (2/set) — 1810-T 1 120V Armature Assembly — 1810-U 1 Gear Cover with Bushing — 1810-V 1 Spindle and Gear Assembly — 1810-W 1 Bearing Note: See current product catalog for No. 803 Combination Steel Blade, No. 804 Carbide Tipped Steel Blade, and No. 805 Masonry Blade. Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. Gundlach Parts List P-101 6/14/99 No. B-91 Propane Blow Torch Item Number Key 6 1 7 No. 491-5 See Note 2. 5 4 2 See Note 1. 3 8 1 2 3 4 5 6 7 8 9 10 11 12 — MT-5T MT-201 MT-200 MT-38S-D MT-58 MT-97 MT-105 MT-202 MT-107 MT-108 MT-109 MT-113 MT-201-OR Qty. Used 1 1 1 1 1 1 1 1 1 1 1 1 1 Description Torch Tube Stem, Nut and Handwheel (see Note 1) Cylinder Valve Assembly Stem Nut Orifice 90° Steel Adaptor 10% Stem (see Note 1) Cap Nut Plastic Handle Handle Bolt Lock Washer O-Ring for No. MT-201 See Note 1. See Figure 1. 11 No. B-91-C See Note 2. 10 12 9 Notes: and will not work with 1. Keys the old style Cylinder Valve Assembly (see Figure 1). 2. See current product catalog for No. B-91-C Cylinder and Valve Assembly and No. 491-5 Tip Assembly. 3. See current product catalog for additional accessories that can be used with the Nos. B-91 and B-91T Propane Blow Torches. ➁ ➇ Figure 1. Old style Cylinder Valve Assembly with Aluminum Handwheel (shown above) has been discontinued. Replace with No. MT-200 Cylinder Valve Assembly (see Key above). ➂ No. B-91T Propane Blow Torch Item Number Key 11 6 1 19 20 15 No. 2C See Note 2. 16 12 14 13 4 5 18 2 See Note 1. 10 3 7 See Note 1. See Figure 1. No. B-91-C See Note 2. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 — — MT-5T MT-201 MT-200 MT-38S-D MT-58 MT-97 MT-202 MT-107 MT-108 MT-109 MT-110 MT-114 MT-315102 MT-315103A MT-112 MT-315106A MT-113 MT-115 MT-116 MT-117 MT-201-OR MT-2C-OR Qty. Used 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 set 9 Notes: 1. Keys and will not work with the old style Cylinder Valve Assembly (see Figure 1). 2. See current product catalog for No. B-91-C Cylinder and Valve Assembly and No. 2C Trigger Valve Assembly. 3. See current product catalog for additional accessories that can be used with the Nos. B-91 and B-91T Propane Blow Torches. ➁ 17 8 Description Torch Tube Stem, Nut and Handwheel (see Note 1) Cylinder Valve Assembly Stem Nut Orifice 10% Stem (see Note 1) Cap Nut Plastic Handle Handle Bolt 90° Steel Adaptor Set Screw Needle Stem Insert and Stem Assembly Lever Pivot Roll Pin Lever with No. MT-116 Lock Washer Spring Lever Stop Roll Pin Copper Washer O-Ring for No. MT-201 O-Rings for No. 2C Trigger Valve Assembly (for items keyed 13 and 14); 4/set ➆ Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. Figure 1. Old style Cylinder Valve Assembly with Aluminum Handwheel (shown above) has been discontinued. Replace with No. MT-200 Cylinder above). Valve Assembly (see Key ➂ 7 6/14/99 Gundlach Parts List P-101 No. 2822 Uni-Lift Heavy Mover 10 19 13 15 20 8 12 7 5 21 20 11 16 4 1 14 6 Key Item Number Qty. Used 1 1 1 4 5 6 7 8 — 10 11 12 13 14 15 16 19 20 2822-01 2822-02 2822-03 2822-04 2822-05 2822-06 2822-07 2822-08 2822-09 2822-10 2822-11 2822-12 2822-13 2822-14 2822-15 2822-16 2822-19 2822-20 1 1 1 1 1 4 1 1 1 1 2 1 1 4 2 1 1 set 1 set 21 — — 2822-21 2822-17 2822-18 4 1 1 Description 2" x 1' Strap with Buckle 2" x 7' Strap with Buckle 2" x 11' Strap with Buckle (see note) 2" x 11' Strap without Buckle Handle with Grip Swivel Floor Caster Right Hand Frame Left Hand Frame Right Top Section (not shown) Left Top Section Cradle Right Hand Lifting Lever Left Hand Lifting Lever Caster Socket Plastic Lifting Wheel Handle Clip with Screw Rubber Protective Strip (4/set) Lifting Lever Pin Set (4 pins, 4 washers, 4 cotter pins and 2 roll pins) Square Head Set Screw 1/2 Unit Right Hand Frame 1/2 Unit Left Hand Frame Note: This strap is optional and is used in place of, or with, the No. 2822-02 Strap for moving very large items. No. 15 and No. 25 Linoleum Dollies No. 25 3 No. 15 4 Key 2 1 2 1 5 Item Number Qty. Used 1 2 3 1525-1 1525-2 1525-3 2 4 3 4 1525-4 3 5 1525-5 2 — — 1525-6 1525-7 1 set 4 Description End Casting only Wheel with Axle, Bushing, 2 Clips 18" Roller Assembly (includes axle, 4 nuts and 2 lock washers) 36" Roller Assembly (includes axle, 4 nuts and 2 lock washers) End Casting Assembly (includes Nos. 1525-1 and 1525-2) C-Clips (8/set) Wheel Axle only 5 No. 848 Carpet Crane 7 13 12 1 2 3 4 5 6 7 8 9 10 11 848-01 848-02 848-03 848-04 848-05 848-06 848-07 848-08 848-09 848-10 848-11 1 1 1 1 1 1 1 1 1 1 1 12 13 848-12 848-13 1 1 15 — — 848-15 848-14 848-16 1 1 1 set 5 15 3 10 2 9 6 8 8 Qty. Used Key 4 1 Item Number 11 set set set set Description Stationary Leg (Square End) Movable Leg (Beveled End) 6' Galvanized Carpet Lift Tube 3/8" Hex Hd Bolt, Nut, Washer (2/set) 5/16" Flat Hd Bolt, Nut, Washer (2/set) Screws for Safety Chain (2/set) 4" Eye Bolt with Nut and Washer Rubber Tips for Legs (2/set) Safety Chain Synthetic Cable with Hook 7 gauge Triangular Front Plate (with 2 countersunk holes) 10 gauge Triangular Rear Plate Brake Winch, Hardware and Handle (includes No. 848-16) Winch Handle only Lift Tube Abrasive Tape Strip Crane Hardware Set (includes keys 4–12, No. 848-14 and instruction sheet) Note: The Brake Winch is a Model No. B1200A produced by the DuttonLainson Co. of Hastings, NE. If parts are needed, contact Grainger Parts Operations at TEL: 800 323-0620, or FAX: 800 722-3291. Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. Gundlach Parts List P-101 6/14/99 No. 400-CS Junior Carpet Stretcher 17 18 17 Key 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 — — 17 Note: See current product catalog for No. 402-TS Tubing Sections and No. 403-RC Steel Case. Item Number Qty. Used Description 1400-B 1400-C 1400-D 1400-E 1400-F 1400-G 1400-H 1400-I 1400-J 214-07 1400-K 402-TS-A 1400-M 1400-Q 1400-R 1400-N E-1635-6AB E-1635-4AB 1400-A 1400-P 1 1 2 2 1 1 1 1 1 4 1 — 1 1 1 1 2 1 1 1 Handle with Grip and Bushings Knurled Pin Link Pin with 4 Washers and 2 Nuts Connecting Link Neck Casting and Tube Assembly Pin Adjustment Knob with Washer Pin Depth Adjustment Bar with 3 Springs Head Casting and Thrust Bar Assembly Pin Plate Assembly with No. 1400-P Kicker/Stretcher Teeth (16/package, 59/assembly) Tail Tube Assembly Spring Clip Assembly Tail Block with Pad and Casters Rubber Pad for No. 1400-M Caster with 3 Screws (2/set) Straight Transfer Tube Assembly Large Latch Set with 4 Rivets Handle, 2 Clips and 4 Rivets Bushings for Nos. 1400-B and 1400-F (3/package) 5 Screws and 3 Screw/Post Sets pkg set set set pkg pkg 12 1 12 2 16 11 6 The current production Thrust Bar (part of Head Casting, see Key ) is round. If you need to replace either Key or Key , and your present Thrust Bar is square, you must order both Key and Key . ➇ ➇ ➄ ➇ ➄ 14 12 3 12 15 9 10 7 8 4 5 13 No. KT-150 Deluxe Carpet Stretcher 18 Item Number Qty. Used 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 — E-1470-28B-3 E-1470-46 214-07 E-1470-33A E-1470-29A 1400-G E-2052-10A E-2052-10 E-1470-8B E-1470-12A 1400-K 402-TS-A 1400-M 1400-Q 1400-R 1400-N E-1635-5AB E-1635-6AB E-1635-4AB E-1470-9A 1 1 4 1 1 1 2 2 1 1 1 — 1 1 1 1 2 2 1 1 — E-1470-9B Key 17 17 19 18 Note: S e e c u r r e n t p r o d u c t catalog for No. 402-TS Tubing Sections and No. KT-15C Plastic Case. Description Head Casting and Thrust Bar Assembly 1/2" x 1-3/4" Dowel Pin Kicker/Stretcher Teeth (16/package, 60/assembly) Pin Plate Assembly with 6 Screws Pin Depth Adjustment Bar with 3 Springs Pin Adjustment Knob with Washer Link Pin with 4 Washers and 2 Clips Connecting Link Handle with Grip and Bushings Forward Tube Assembly Tail Tube Assembly Spring Clip Assembly Tail Block with Pad and Casters Rubber Pad for No. 1400-M Caster with 3 Screws (2/set) Straight Transfer Tube Assembly Small Latch Set with 4 Rivets Large Latch Set with 4 Rivets Handle, 2 Clips and 4 Rivets Bushings for Nos. E-1470-8B and E-1470-12A (3/package) Thrust Bar Bushing, for No. E-1470-12A pkg set set set set pkg 1 9 12 7 2 11 6 12 14 12 16 12 5 4 3 1 8 10 15 13 Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. 9 11/9/99 Gundlach Parts List P-101 No. 214 Carpet Kicker Key 9 Qty. Used 1 2 214-01 214-02 1 1 3 4 5 6 7 8 9 9 214-03 214-04 214-05 214-06 214-07 214-08 214-09 10-422-09 1 set 1 1 1 1 pkg 1 1 1 214-10 1 See Note 1. 1 10 10 Description Main Body and Dial Assembly Extension Channel with 2 Balls and 2 springs, lock washer and bolt Nap Grip Inserts (3/set) Pin Plate Assembly with Teeth Pin Cover Bottom Plate with 10 Screws Kicker/Stretcher Teeth (16/package) Trigger Assembly with Spring Bumper Assembly with 4 Screws Bumper Assembly with 4 Screws (see Note 1) Kick Plate Notes: 1. The No. 10-422-09 Bumper Assembly is an optional replacement for the No. 214-09 Bumper Assembly, and is identical to the original except it is 50% thicker for additional knee comfort and protection. 2. See current product catalog for the No. 214-11 Tuff Teeth. These hardened stainless steel blades can be used as an optional replacement part for the No. 214-03 Nap Grip Inserts. 2 8 4 Item Number 6 7 3 5 No. KT-260 Carpet Kicker 1 2 3 18 4 19 5 6 7 5 8 20 15 16 17 23 9 10 11 12 13 24 21 22 Key Item Number Qty. Used 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 KT260-01 KT260-02 KT260-03 KT260-04 KT260-05 KT260-06 KT260-07 KT260-08 KT260-09 KT260-10 KT260-11 KT260-12 KT260-13 KT260-14 KT260-15 KT260-16 KT260-17 KT260-18 KT260-19 KT260-20 KT260-21 KT260-22 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 23 24 — — KT260-23 KT260-24 KT260-25 KT260-26 1 1 set 1 1 set pkg set set set set Description Label 8-32 x 5/8" Screw Knob Curved Washer Nylon Washer (2/set) Click Spring Main Body Pin Plate Wear Guide Height Adjustment Screw Pin Plate Assembly with Teeth Kicker Teeth (18/package) Sole Plate 8-32 x 3/4" Screw (6/set) Nap Grip Insert Ball Bearing (4/set) Spring (2/set) Shaft 8-32 x 5/8" Screw (4/set) Kick Plate Shaft Lock Washer 1/4-20 x 3/4" Screw Bumper Assembly (includes Nos. KT260-18 and KT260-25) Handle Cover 8-32 x 1/2" Screw (6/set) Vinyl Trim for Bumper Cover Pad for Bumper 14 13 10 Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. W v T Gundlach Parts List P-101 6/14/99 No. 107 Mini-Stretcher Key 1 5 6 Item Number Qty. Used 1 2 3 4 107-01 107-02 107-03 117-03 1 1 1 1 5 6 7 8 107-05 107-06 107-07 107-08 1 set 1 set 1 1 9 214-07 1 pkg 10 11 — — 107-10 214-03 107-14 107-30 1 2 set 1 1 Description Handle Assembly Frame Assembly Tail Blade Cup Washer and Screw (includes socket wrench) Link Assembly (2/set) Pivot Pins (8/set, 8 pins required) Driver Assembly Head Assembly (includes Nos. 107-10 and 214-03) Kicker/Stretcher Teeth (16/package, 24/assembly) Pin Plate Assembly only Nap Grip Inserts (3/set) Retaining Ring and Wave Washer Carrying Case 2 7 3 8 9 4 10 11 No. 107-SRA Seam Repair Attachment Key 2 Item Number Qty. Used 1 117-01 1 2 3 117-02 117-03 1 1 4 5 6 107-06 107-10 214-07 1 set 1 1 pkg 7 — 214-03 107-14 2 set 1 Description Seam Repair Head Assembly (includes Nos. 107-10 and 214-03) Seam Repair Driver Assembly Cup Washer and Screw (includes socket wrench) Pivot Pins (8/set, 2 pins required) Pin Plate Assembly only Kicker/Stretcher Teeth (16/package, 24/assembly) Nap Grip Inserts (3/set) Retaining Ring and Wave Washer 1 3 4 7 5 6 Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. 11 6/14/99 Gundlach Parts List P-101 No. 75-LR, No. 100-LR and No. 150-LR Linoleum Rollers 75-LR Roller Item No. 100-LR Roller Item No. 150-LR Roller Item No. 1 2 3 4 5 LR-RA LR-RH LR-LN LR-75/100Y 75-LR-5 LR-RA LR-RH LR-LN LR-75/100Y 100-LR-5 LR-RA LR-RH LR-LN LR-150Y 150-LR-5 6 7 75-LR-6 75-LR-7 100-LR-6 100-LR-7 150-LR-6 150-LR-7 LR-GRIP LR-CPIN LR-WASHER LR-GRIP LR-CPIN LR-WASHER LR-GRIP LR-CPIN LR-WASHER 8 Key 8 9 10 Description 7/8" Axle with Washer and Cotter Pin Handle with Grips and Lock Nut Lock Nut Yoke with Cotter Pin Axle Head Roller with Cotter Pin (5/16" deep x 1-1/4" counterbore) Center Roller with Cotter Pin (no counterbore) Cotter Pin Roller with Cotter Pin (7/16" deep x 1-7/8" counterbore) Hand Grip Cotter Pin Washer Notes: 1. A Cotter Pin is supplied with all parts that require removing the axle for parts replacement. 2 2. Items 5, 6 and 7 have diameters as follows: 75-LR 4½" 100-LR 5¼" 150-LR 6½" 3. All items are quantity required 1 each except No. LR-GRIP Hand Grip, which is quantity required 2 each. 3 4 9 10 1 5 Axle Head Roller 6 Center Roller 7 Cotter Pin Roller 1 No. R-1 Edge Binding Stapler Key 2 1 2 Item Number R1-1 R1-2 Qty. Used 1 1 Description Adjustable Throat Gauge with Screw Feeder Assembly 1 12 Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. Gundlach Parts List P-101 6/14/99 No. R-11 Staple Hammer Key 1 2 3 4 5 6 7 8 9 4 3 7 5 Item Number R11-1 R11-2 R11-3 R11-4 R11-5 R11-6 R11-7 R11-8 R11-9 Qty. Used 1 1 1 1 1 1 1 1 2 Description Weight Block Kit Driver Kit Rubber Handle Grip Feeder Assembly Assembly Pin Magazine Assembly Rivet Return Spring Complement Spring 1 6 9 8 2 No. H2B and No. H2B-1/2 Staple Hammers H CH ITC TIT ST OS B BO 8 7 6 9 2 5 10 4 11 3 12 13 BOSTITCH 1 14 15 16 17 20 18 19 Key Item Number 1 2 3 4 5 6 7 7 8 9 10 11 12 13 14 14 15 16 16 17 18 19 20 20 21 H2107 H2108 H258 H260 H2152 H253 H2161A H2164A* H2139 H241G H286 H221C H223B H2141A H2135A H2136A* H230C H2109A H227DA* H2110 H2104 H2159 H2167A H2168A* H2166A Qty. Used 1 1 1 1 3 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Description Grip Grip Retainer Striker Striker Link Pin Driver Lever Spring Driver Lever Pivot Driver Lever (H2B) Driver Lever (H2B-1/2) Rubber Driver Bumper Driver Door Spring Door Door Pivot Door Closure Spring Pusher (H2B) Pusher (H2B-1/2) Pawl Spring Pawl Pawl (H2B-1/2) Front Spring Roller Pusher Spring Rear Spring Roller Right Handle (H2B) Right Handle (H2B-1/2) Left Handle Note: Item Numbers with an asterisk (*) are parts for No. H2B-1/2 only. 21 Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. 13 8/21/99 Gundlach Parts List P-101 No. H-24 24" Tile Cutter 8 7 13 Item Number Qty. Used 1 2 3 H-24-7 H-24-9 H-24-10 1 1 20 4 5 6 7 8 9 10 H-76-12 H-24-13 H-24-14 H-24-15 H-76-16 H-24-17 H-24-18 4 1 2 2 2 8 4 11 12 13 14 H-24-19 H-24-20 H-24-21 H-24-22 1 1 1 1 Key 2 10 H-24-3 H-24-4 See note. 9 4 3 14 6 5 11 12 Description Base Casting Upper Blade Bar Blade Holding Screw Assembly (Includes Socket Head Screw, Flat Washer, Split Lock Washer, and Jam Nut) Coil Spring Crankshaft and Handle with Grips Crankshaft Ball Bearing Crankshaft Cam Bearing Thumb Screw with Nut Post Adjusting Set Screw Post Mounting Screw Assembly with Flat Washer and Lock Washer Right Upper Blade Bar Post Left Upper Blade Bar Post Upper Blade Bar Stiffener Lower Blade Bar Frame Note: See current product catalog for the following parts: • No. H-24-3 Upper Blade • No. H-24-4 Lower Blade • No. H-2490 Adjustable Straight Gauge with Screw • No. H-2445 Adjustable Combination Straight/45° Gauge with Screw • No. H-24-5 Casters with Screws (4/set) 1 H-2445 H-2490 See note. No. H-76-1 and No. H-76-2 Tile Cutters 9 8 3 6 6 4 10 H-76-3 See note. H-76-4 5 10 2 Item Number Qty. Used 1 2 3 4 5 6 7 8 9 10 — H-76-7 H-76-8 H-76-9 H-76-10 H-76-11 H-76-12 H-76-13 H-76-14 H-76-15 H-76-16 H-5 1 1 set 1 10 2 2 1 2 2 2 1 set Description Base Casting Set Screw and Nut (8/set) Upper Blade Bar Blade Cap Screw Upper Blade Bar Slide Plate Coil Spring Crankshaft and Handle with Grip Crankshaft Ball Bearing with Retainer Crankshaft Cam Bearing Thumb Screw with Nut Casters with Bolts and Nuts (3/set) These casters are for all older models that have only the inch scale on the base casting. Note: See current product catalog for the following parts: • No. H-76-3 Upper Blade • No. H-76-4 Lower Blade • No. H-76-5 Casters with Screws (3/set) • No. H-76-6 Combination Gauge with Screw 7 8 5 Key 2 1 H-76-5 See note. H-76-6 See note. H-76-5 See note. 14 Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. Gundlach Parts List P-101 6/14/99 No. 106-xx and 108-xx Divider 1 Key 5 1 2 3 4 5 2 Item Number 106-08-A 106-08-B 106-08-C 106-08-D 106-08-E Qty. Used 1 1 1 1 1 Description Guide Bar Wing Screw Knurled Nut for Loop Loop Knurled Nut for Guide Bar 3 4 See current product catalog for No. 16-X Pin Vise. No. 205C and 206C Divider 1 3 Key 1 2 3 4 5 6 2 3 4 Item Number 205C-A 205C-B 205C-C 205C-D 205C-E 206C-E Qty. Used 1 1 3 2 1 1 Description Guide Bar Knurled Screw Knurled Nut Threaded Loop Straight Leg Bent Leg 5 6 No. 974 and No. 973-BP Cove Base Guns Key See current product catalog for Nos. 975, 976 and 977 Nozzles. 7 1 2 These parts used only on No. 973-BP Bulk Pack Gun. 19 18 17 16 15 6 3 4 5 12 8 20 12 13 11 7 14 9 22 21 10 Item Number Qty. Used 1 2 3 4 5 6 7 974-01 974-02 974-03 974-04 974-05 974-06 974-07 1 1 1 1 1 1 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 974-08 974-09 974-10 974-11 974-12 974-13 974-14 973-15 973-16 973-17 973-18 973-19 974-20 974-21 974-22 1 1 1 1 2 1 1 1 2 1 1 1 1 1 1 Description Barrel Gasket Rod Rod Pull Half Hex Nut Hex Bushing with Piston Washer Handle and Cap Assembly with No. 974-14 installed Bushing for Lever (see Note 1) Lever Screw (see Note 2) Rivet (see Note 2) Square End Dog Spring (see Note 2) Dog (see Notes 1 and 2) Lever Screw Lock Nut (see Note 2) Lever Assembly Speed Nut (see Note 3) Leather Cup (see Note 3) Steel Washer (see Note 3) Piston Screw (see Note 3) Expander Ring (see Note 3) Lever Spring (see Note 1) Lever Dog Pin (see Note 1) Round End Dog Spring (see Note 1) Notes: 1. These parts are not recommended for field replacement. Use the next higher assembly No. 974-14. 2. These parts are not recommended for field replacement. Use the next higher assembly No. 974-07 which includes No. 974-14 installed. 3. These parts are for the No. 973-BP Bulk Pack Gun only. Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. 15 6/14/99 Gundlach Parts List P-101 No. 338 Universal Cutting Tool Item Number Key 1 2 3 4 338-01 338-02 338-03 338-04 Qty. Used Description 1 1 1 1 Outer Blade Flange Cap Screw Outer Blade Flange Handle with Bracket and Wing Nut 5/32" Long Arm Hex Key 3 ➀ Note: The Outer Blade Flange Cap Screw (Key ) is a right-hand thread. This means it is tightened in the clockwise direction and loosened in the counterclockwise direction. The use of an anti-seize grease is recommended to assist screw removal. 2 1 4 No. 950 Measuring Wand 2 Key 3 2 3 4 5 6 7 8 See the current product catalog for No. 950-1 Replacement Line. Item Number Qty. Used 950-2 950-3 950-4 950-5 950-6 950-7 950-8 Description 1 1 1 1 1 1 1 set Front Line Guide Rear Line Guide End Clip Swivel Snap Crimp Tube Black Plastic End Cap Mounting Screw and Washer (2/set) 7 5 8 6 4 Note: Remove the black cap to access the Instructions and Parts List stored in the handle. No. 104 Tackless Strip Cutter Key 8 9 5 1 Item Number Qty. Used 1 2 3 4 5 6 104-01 104-02 104-03 104-04 104-05 104-06 1 1 1 1 set 1 1 set 7 8 9 10 104-07 104-08 104-09 104-10 1 1 set 1 set 1 2 4 6 10 Description Handle with 2 Pins and 2 C-Clips Upper Jaw with No. 104-05 Lower Jaw with No. 104-07 Pin (2/set) Set Screw Blade Clamp with Screw (6 pieces/set) Handle Catch with Rivet and Washer C-Clips (2/set) Blade Container with Spring Roll Pin 7 3 16 Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. Gundlach Parts List P-101 6/14/99 No. JTS Gundlach Junior Tile Saw (¹⁄₂ hp and ³⁄₄ hp models) 7 Key 4 5 6 14 1 2 3 4 5 6 7 8 See Page 22 for the 9 Mandrel Repair Program. 10 11 10 12 11 13 13 14 9 14 15 14 15 16 16 17 17 18 19 19 18 — 12 — Note: See current product catalog — for replacement blades. 8 3 2 1 Item Number Qty. Used JTS-7928 JTS-7921 JTS-7922 JTS-7927 1 1 1 set 1 JTS-7916 * JTS-7915 * JTS-7925 JTS-7914 JTS-7920 * JTS-7910 * JTS-7911 * JTS-7912 * JTS-7913 * JTS-7929 * JTS-7930 * JTS-7917 * JTS-7918 JTS-7919 * JTS-7931 JTS-7932 JTS-7923 1 1 1 1 1 set 1 1 1 1 1 1 1 1 1 1 1 1 JTS-7924 * JTS-7926 1 1 Description Tubular Frame Water Pan with No. JTS-7922 Brackets, Screws and Nuts (2/set) Plastic Top, 8 Screws, 8 Nuts and 2 Mandrel Shims Flat Miter Gauge Rip Guide with Thumb Screw Splash Guard Assembly 2-Piece Belt Guard with Screws Rubber Foot, Screw and Nut (4/set) Mandrel with Pulley, Flange and Nut 2" O.D. x 5/8" Mandrel Pulley 5" O.D. x 5/8" Motor Pulley V-Belt (4L290) 1/2 H.P. Motor 3/4 H.P. Motor Toggle Switch with Wire Switch Cover Plate and Guard 8' 18-3 Cord with Plug and Terminal Outer Blade Flange 5/8"-11 Left Hand Hex Nut Water Chute with 2 Screws and 4 Washers Water Chute Cover with 4 Screws Splash Guard Mounting Bracket with Screw, Washer and Lock Nut * These parts can be used on the Angle Iron Frame Model prior to 1979. No. STS Gundlach Senior Tile Saw (1 hp and 1¹⁄₂ hp models) 4 3 2 1 Key 12 11 10 9 8 7 17 18 11 19 20 21 Item Number Qty. Used 1 STS-7927 1 2 3 4 5 13 6 7 8 9 5 9 10 10 See Page 22 for the 11 Mandrel Repair Program. 12 13 14 6 16 14 15 16 16 17 18 18 15 23 19 22 20 21 22 23 — Note: See current product catalog — for replacement blades. JTS-7916 STS-7915 STS-7925 STS-7921 STS-7928 STS-7920 STS-7914 STS-7929 STS-7930 STS-7919 STS-7934 STS-7918 STS-7917 STS-7933 1 1 1 1 1 1 set 1 1 1 1 1 1 1 1 STS-7910 STS-7911 STS-7913 STS-7935 STS-7940 STS-7941 STS-7942 STS-7938 STS-7937 STS-7936 STS-7943 JTS-7932 JTS-7926 1 2 1 1 1 1 1 1 1 1 1 1 1 STS-7923 1 — — STS-7924 STS-7931 1 1 Description Table Top with 16 Screws, Nuts and Lock Washers Flat Miter Gauge Rip Guide with Thumb Screw Splash Guard Assembly Water Pan with No. STS-7931 2-Piece Frame Unit Rubber Foot, Screw and Nut (4/set) 2-Piece Belt Guard with Screws 1 H.P. Motor 1-1/2 H.P. Motor 8' 14-3 Cord with Plug (1 H.P.) 7' 12-3 Cord with Plug (1-1/2 H.P.) Switch Box Toggle Switch Elbow, Drain Tube, Clamp and Hardware Mandrel with Pulley, Flange and Nut 2-1/2" O.D. x 5/8" Pulley V-Belt (4L330, 1 H.P. Motor) V-Belt (4L320, 1-1/2 H.P. Motor) Cover Plate with Seal Strain Relief (14-3, 1 H.P.) Strain Relief (12-3, 1-1/2 H.P.) 1/2" x 1-1/4" Nipple 1/2" Conduit Lock Nut Motor-to-Switch Wire Outer Blade Flange 5/8"-11 Left Hand Hex Nut Splash Guard Mounting Bracket with Screw, Washer and Lock Nut Water Chute with 2 Screws and Washers Water Chute Cover with 4 Screws Drain Plug Assembly MK, Rubi and Target Ceramic Tile Saws We stock a number of parts for MK, Rubi and Target Ceramic Tile Saws. However, due to the complex and changing nature of these saws, we have decided not to include an illustrated parts diagram with this parts list. Please contact us for further information. Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. 17 6/14/99 Gundlach Parts List Superior Tile Cutter ® Ceramic Tile Cutters Notes: 1. This exploded view of the No. 00 Tile Cutter ) to all shows common parts (square keys cutters. Other parts (round keys ) are similar to those on other cutters. All parts are 1 required unless noted otherwise. 2. All Rubber Pads on this page are sold individually with 2 each required, except Nos. 00-RP and 3-RP, which are sold 2 per set. 3. See current product catalog for No. 400 Carbide Scoring Wheel, No. A-TP Tile Protectors and Nos. 3-W and 6-W Scoring Turrets for all tile cutters on this page. No. 00 and No. 00-400 P-101 2 1 3 6 5 4 7 8 9 No. 1A and No. 1A-400 Key 1 2 3 4 5 6 7 8 9 No. 2A and No. 2A-400 No. 3-400 00 and 00-400 Item No. 1A and 1A-400 Item No. 2A and 2A-400 Item No. Description A A-HATS A-IS WGN SBA 00-BAR 00-AGS 00-SS 00-RP A A-HATS A-IS WGN SBA 1A-BAR 12-AGS 12-SS 1A-RP A A-HATS A-IS WGN SBA 2A-BAR 12-AGS 12-SS 2A-RP Handle with Insert and Spring Set Height Adjustment Thumb Screw Insert and Spring Set Wing Nut Stud Bolt Assembly Handle Slide Bar with 2 Screws Angle Gauge Slide Assembly Slide with Screw Rubber Pads Key 3-400 Item No. 4-400 Item No. 1 2 3 4 5 6 7 7 8 A A-HATS A-IS WGN SBA 3-BAR 3-AGS —— 3-SS A A-HATS A-IS WGN SBA 4-BAR —— 4-SGA 4-SS 9 3-RP 4-RP Description Handle with Insert and Spring Set Height Adjustment Thumb Screw Insert and Spring Set Wing Nut Stud Bolt Assembly Handle Slide Bar with Screws Angle Gauge Slide Assembly Straight Gauge Assembly Slide with Screw (2 Slides required for No. 4-400) Rubber Pads No. 4-400 1 6 No. 2AA 11 2 3 10 4 5 7 No. 1AA 9 Key 1AA Item No. 2AA Item No. 4AA-400 Item No. Description 1 2 3 4 5 6 7 9 10 11 — — A A-HATS A-IS WGN SBA 1AA-BAR AA-SG 1AA-RP AA-PG AA-LL AA-LS AA-GP A A-HATS A-IS WGN SBA 2AA-BAR AA-SG 2AA-RP AA-PG AA-LL AA-LS AA-GP A A-HATS A-IS WGN SBA 4-BAR AA-SG 4-RP AA-PG AA-LL AA-LS AA-GP Handle with Insert and Spring Set Height Adjustment Thumb Screw Insert and Spring Set Wing Nut Stud Bolt Assembly Handle Slide Bar with Screws Square Gauge Rubber Pads Protractor Gauge with Screw Protractor Locking Lever Protractor Locking Screw Assembly Protractor Gauge Pivot Assembly No. 4AA-400 18 Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. Gundlach Parts List P-101 6/14/99 Crain Ceramic Tile Cutters The No. 030X Crain Ceramic Tile Cutter has been discontinued. However, most parts are available. 3 Key 1 2 3 4 5 6 7 8 030X Item No. 032X Item No. 033X Item No. Qty. Used Description 1030-J A-HATS WGN 1030-L 1030-M 1030-N 1030-P 1030-R 1030-J A-HATS WGN 1032-L 1032-M 1032-N 1030-P 1030-R 1030-J A-HATS WGN 1033-L 1045-B 1033-N 1030-P 1030-R 1 1 1 1 set 1 1 1 set 1 Handle with 3 Screws Height Adjustment Thumb Screw Wing Nut Rubber Pads (2/set) Guide and Slide Assembly Cross Bar Upright and Screw (2/set) Bearing and Spring Set 2 1 Notes: 1. This exploded view of the Crain Ceramic Tile Cutter shows ) to all cutters. Other parts common parts (square keys (round keys ) are similar to those on other cutters. 2. See current product catalog for No. 400 Carbide Scoring Wheel, No. A-TP Tile Protectors and Nos. 3-W and 6-W Scoring Turrets for all tile cutters. 8 6 4 7 5 7 4 No. 045X Crain Heavy Duty Ceramic Tile Cutter Key 7 6 4 3 See note. 1 2 3 4 5 6 7 8 Item Number 1033-L 1045-B 1045-C 1045-D 1045-E 1045-F 1045-G 1045-I Qty. Used 1 set 1 1 set 1 set 1 1 1 1 Description Rubber Pads (2/set) Guide and Slide Assembly End Posts (4 pieces/set) Rods (2/set) Bearing Block Assembly Breaker Pivot Arm, Handle and Grip Assembly Base Note: See current product catalog for No. 046 Carbide Scoring Wheel. 5 8 2 1 Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. 19 1/4/00 Gundlach Parts List P-101 Clinker Tile Cutters 8 12 1 7 9 4 2 6 15 14 12 10 3 13 11 8 5 Item Number Key 1 2 3 4 5 6 7 8 9 10 11 CT-1-10 CT-1-11P CT-1-11P-B CT-1-14 MC-14-04 MC-14-15 MC-14-22 MC-14-23 MC-14-07 MC-14-06 MC-14-03 1 1 1 1 1 1 1 1 1 1 1 12 13 14 15 MC-14-02 MC-14-20 MC-14-21 MC-14-01 2 set 1 1 1 No. MC-14 Super Clinker Tile Cutter Item Number Key 16 9 6 18 1 15 19 7 4 2 5 19 3 17 6 18 14 13 12 11 CT-1-27 CT-1-11P CT-1-11P-B CT-1-14D CT-1-15 CT-1-23 CT-1-25 CT-1-04 CT-1-05 CT-1-01 CT-1R-20 CT-1R-20A CT-1R-21 CT-1R-21R CT-1R-22 CT-1-06 CT-1-07 CT-1-02 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 19 CT-1R-26 4 No. CT-1R Power Clinker Tile Cutter Key 6 28 5 4 24 25 1 18 14 13 12 19 20 17 21 9 10 11 28 7 23 17 21 26 27 2 22 16 15 No. MC-500R and No. MC-600R Big Clinker Tile Cutters 3 Note: See current product catalog for Carbide Scoring Wheels for all tile cutters on this page. 20 Description Handle with Knob Protractor Gauge Wing Nut Hardware Set on Gauge Wing Screw and Washer Rubber Pads (2/set) Rail Bars (2/set) Pivot Arm End Posts (2/set) 6x42mm Hex Bolt, Lock Washer and Nut 6x23mm Hex Bolt, Lock Washer and Nut 6x23mm Fillister Screw, Lock Washer and Nut 10x20mm Hex Bolt and Lock Washer Sliding Block Breaker Foot Base Casting set set set set set set set set Qty. Used 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 8 10 Qty. Used Item Number Description Handle with Knob Protractor Gauge Wing Nut Hardware Set on Gauge Dial Screw and Washer for Gauge Rail Bars (2/set) End Posts (2/set) Pivot Arm Bearings with washers (2/set) Rubber Pads (2/set) Rubber Shock Absorbers (2/set) Base Casting Bearing Block Assembly Cap for Bearing Block (2/set) Breaker Foot with No. CT-1R-21R Hard Rubber Pad only Pivot Arm 8x55mm Hex Bolt, Lock Washer and Nut 6x25mm Hex Bolt, Lock Washer and Nut 10x25mm Hex Bolt, Washer and Lock Washer Hex Head Rail Bolt set set set set set set set set set set set Qty. Used 1 2 3 4 5 6 7 8 9 10 11 12 13 14 MC-500-25 MC-500-04 MC-600-04 MC-500-10B MC-500-10C MC-500-10D MC-500-11P CT-1-11P-B CT-1-14 MC-500-15 MC-600-15 MC-500-20 MC-500-20A MC-500-20B 1 1 1 1 1 1 1 1 1 1 1 1 1 1 set set set 15 16 17 18 19 20 21 MC-500-21 CT-1R-21R MC-500-23 MC-500R-10 MC-500R-10A MC-500-05 CT-1-02 1 1 1 set 1 1 1 set 2 set 22 CT-1-07 1 set 23 MC-500-07 1 set 24 25 26 27 28 MC-500-08 MC-500-09 MC-500-01 MC-600-01 MC-700-14 1 1 1 1 4 set set set set set set set 8 Description Pivot Arm Bearings (2/set) Rubber Pads for MC-500R (2/set) Rubber Pads for MC-600R (2/set) Wheel Holder Coil Spring Wheel Height Adjustment Cam Cam Knob with Washer and Screw Protractor Gauge Wing Nut Hardware Set on Gauge Wing Screw and Washer Rail Bars for MC-500R (2/set) Rail Bars for MC-600R (2/set) Bearing Block Assembly Cap for Bearing Block (2/set) 8x55mm Hex Bolt, Bushing, Lock Washer and Nut Breaker Foot with No. CT-1R-21R Hard Rubber Pad only End Posts (2/set) Handle Assembly without Wheel Wheel Holder Rubber Shock Absorbers (2/set) 10x25mm Hex Bolt, Washer and Lock Washer 6x25mm Hex Bolt, Lock Washer and Nut 6x30mm Hex Bolt, Lock Washer and Nut 6x16mm Flat Head Screw 6x16mm Phillips Binding Head Screw Base Casting for MC-500R Base Casting for MC-600R Hex Head Rail Bolt Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. Gundlach Parts List P-101 1/4/00 Clinker Tile Cutters (continued) Key 6 5 4 24 25 18 1 Item Number Qty. Used 1 2 3 4 5 6 7 8 9 10 11 12 13 14 MC-500-25 MC-700-04 MC-700-01 MC-500-10B MC-500-10C MC-500-10D MC-700-11P CT-1-14 CT-1-14D MC-700-15 MC-700-14 MC-500-20 MC-500-20A MC-500-20B 1 1 1 1 1 1 1 1 1 1 4 1 1 1 15 16 17 18 19 20 21 MC-500-21 CT-1R-21R MC-700-23 MC-500R-10 MC-500R-10A MC-500-05 CT-1-02 1 1 1 set 1 1 1 set 2 set 22 CT-1-07 1 set 23 MC-500-07 1 set 24 25 MC-500-08 MC-500-09 1 1 26 27 28 29 30 MC-700-02 MC-700-03 MC-700-13 MC-700-12 MC-700-10 2 2 2 2 8 set 31 CT-1-11P-B 1 set 14 13 12 19 set set set set set set set set Description Pivot Arm Bearings (2/set) Rubber Pads for Base (2/set) Base Casting Wheel Holder Coil Spring Wheel Height Adjustment Cam Cam Knob with Washer and Screw Protractor Gauge Wing Scew and Washer Dial Screw and Washer for Gauge Rail Bars (2/set) Hex Head Rail Bolt Bearing Block Assembly Cap for Bearing Block (2/set) 8x55mm Hex Bolt, Bushing, Lock Washer and Nut Breaker Foot with No. CT-1R-21R Hard Rubber Pad only End Posts (2/set) Handle Assembly without Wheel Wheel Holder Rubber Shock Absorbers (2/set) 10x25mm Hex Bolt, Washer and Lock Washer 6x25mm Hex Bolt, Lock Washer and Nut 6x30mm Hex Bolt, Lock Washer and Nut 6x16mm Flat Head Screw 6x16mm Phillips Binding Head Screw 6" x 12" Base Extension 12" Side Arm Extension Side Arm Connector Knob Screw for Connector 6x14mm Hex Bolt, Lock Washer and Nut Wing Nut Hardware Set on Gauge 11 20 17 21 9 7 27 8 10 31 26 30 11 28 30 29 23 22 16 15 27 17 21 2 3 No. MC-700R Big Clinker Tile Cutter Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. 21 6/14/99 Gundlach Parts List P-101 Exchange and Repair Programs Hot Melt Iron Exchange Program For Nos. 182-FB, 182-GB, 377-FB, 377-GB and 677-GB. Item No. Description EX-182-FB EX-182-GB EX-377-FB EX-377-GB EX-677-GB Exchange Iron for No. 182-FB Exchange Iron for No. 182-GB Exchange Iron for No. 377-FB Exchange Iron for No. 377-GB Exchange Iron for No. 677-GB Notes: 1. The factory will exchange any of the above irons only if the iron submitted includes all parts, except that the holder (or stand) is not to be submitted. 2. Under this program, the factory does not return the original iron submitted, but strictly a rebuilt equivalent. 3. Exchanged irons will be shipped from our Belleville, Illinois facility under our regular Freight Terms. Gundlach Junior and Senior Tile Saw Mandrel Exchange Program For Nos. JTS-7910 and STS-7910 Mandrel with Pulley, Flange and Nut. Item No. Description EX-JTS-7910 EX-STS-7910 Exchange Mandrel for JTS-7910 Exchange Mandrel for STS-7910 Notes: 1. In this program, we ask that you remove the Flange (Nos. JTS-7931 or STS-7943), Nut (No. JTS-7932) and Pulley (Nos. JTS-7911 or STS-7911) and return only the mandrel assembly. If a Flange, Nut or Pulley is needed, please order separately. 2. Under this program, we do not return the original mandrel submitted, but strictly a rebuilt equivalent. 3. Exchanged mandrels will be shipped from our Belleville, Illinois facility under our regular Freight Terms. Superior Tile Cutter® Nipper Repair Program For Nos. 40, 80, 85C and 85C-1. Item No. Description SN-1 SN-2 SN-3 SN-4 SN-5 SN-6 SN-7 Replace Rivet Only Sharpen 2 Carbide Tips Sharpen 2 Tips and Replace Rivet Replace 1 Carbide Tip Replace 1 Carbide Tip and Rivet Replace 2 Carbide Tips Replace 2 Carbide Tips and Rivet Notes: 1. In order to properly assign repair charges to a particular Nipper, each Nipper of a multiple return must be individually tagged for identification by the party returning the Nippers. If this is not done, we cannot assign charges to a particular Nipper. 2. The factory will repair only Superior Tile Cutter brand Nippers and reserves the right of final determination of which service is necessary to properly repair each Nipper. 3. Repaired Nippers will be returned directly from the factory. Freight charges for our return to the factory and the factory's return are in addition to the repair charge and are payable by the returning party. 22 Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. Gundlach Parts List P-101 6/14/99 Appendix A. List of Parts Not Illustrated Item Number Qty. Used Description Item Number Qty. Used Description No. 1 Gundlach Aluminum Hawk 141 1 Hawk Handle with Hardware 142 1 Callous Preventer for Hawks No. 2-W Lil’ Dolly Bucket Platform 2-W-RC 5 Caster for Lil’ Dolly 2-W-RS 5 Socket for Lil’ Dolly No. 100-LR-WH Wheely Linoleum Roller 402-TS-A 2 Spring Clip Assembly No. 215 Razor Blade Knife 215-SCR 1 Screw for No. 215 No. 105-n Plastic Jug of Chalk 105W-TC 1 Threaded Cap for Jug No. 217 Razor Blade Knife 7-AK-LS 1 10-24 x 3/4" Flat Head Screw 7-AK-SS 1 10-24 x 1/2" Flat Head Screw No. 11-A Airway Scriber 11-A-LSS 1 8-32 x 3/8" Slotted Set Screw 11-A-SSS 1 8-32 x 3/16" Slotted Set Screw 11-A-T-SCR 1 Scriber Thumb Screw 14-G 1 Guide Bar for No. 11-A 18-SB 1 18" Scribing Bar 4-SB 1 4" Scribing Bar 6-SB 1 6" Scribing Bar 8-SB 1 8" Scribing Bar No. 111-A Airway Scriber 11-A-SSS 1 8-32 x 3/16" Slotted Set Screw 11-A-T-SCR 1 Scriber Thumb Screw 14-GS 1 Short Guide Bar for No. 111-A 18-SB 1 18" Scribing Bar 4-SB 1 4" Scribing Bar 6-SB 1 6" Scribing Bar 8-SB 1 8" Scribing Bar No. 112 Razor Blade Knife 112-RN 1 Nut for No. 112 112-RS 1 Screw for No.112 No. 1199 Utility Knife 1199-SCR 1 Screw for No. 1199 No. 1213 Jepson 1/2" Electric Drill 0901026 1 set Carbon Brushes (2/set; 1213) No. 13100 Utility Knife 1371 1 Screw for Nos. 13100 and 1363 No. 1363 Action Knife 1371 1 Screw for Nos. 13100 and 1363 No. 139 Gundlach Aluminum Hawk 141 1 Hawk Handle with Hardware 142 1 Callous Preventer for Hawks No. 150 Tool Box 158-LL 2 158-RHK-TOP 1 set 158-UL 2 Lower Latch with 2 Rivets Handle, 2 Clips and 4 Rivets Upper Latch with 2 Rivets No. 222 Magnetic Hammer 222-RH 1 Handle for No. 222 No. 24-C Replace-A-Bar Towel Bar 24-36-01 2 Spring End for Replace-A-Bar Towel Bar No. 24-W Replace-A-Bar Towel Bar 24-36-01 2 Spring End for Replace-A-Bar Towel Bar No. 2546 Cove Base Corner Cutter 2546-SCR 2 Thumb Screw for No. 2546 No. 26A Minimontolit Tile Cutter 26-RP 1 set Rubber Pads for 26A (2/set) 264 1 Handle and Scoring Wheel for 26A No. 265 Jus-Push Cutter 265-RS 2 Screw for No. 265 WGN 2 Wing Nut No. 266 Duckbill Napping Shears 266-SCR 1 Screw for No. 266 No. 275 Dremel Moto-Tool Kit 4484 1 Collet Nut 480 1 1/8" Collet 90930 1 set Brushes with Springs (2/set) 90962 1 Open End Wrench No. 3-SR Carpet Seaming Roller 3-SR-AP – Axle Pin for No. 3-SR 3-SR-FW – Flat Washer for 3-SR and 6-SR 3-SR-SW – Star Wheel for 3-SR and 6-SR 476-PN 2 Pal Nut for Carpet Tractors No. 30 Aluminum Straight Edge Set 30-TPC 1 Two-piece Carrier for No. 30 No. 301-CBC Cushion Back Cutter 1301-I 1 Handle for No. 301-CBC No. 302-CLC Cushion Lock Cutter 1302-I 2 Thumb Screw for No. 302-CLC No. 150-LR-WH Wheely Linoleum Roller 402-TS-A 2 Spring Clip Assembly No. 303-LPC Loop Pile Cutter 1303-N 2 Thumb Screw for No. 303-LPC No. 154 Razor Blade Knife 154-SCR 1 Thumb Screw for No. 154 No. 31 Montolit Tile Cutter 31-261 1 Handle and Scoring Wheel for 31 No. 158 Tool Box 158-LL 2 158-RHK-END 1 set 158-RHK-TOP 1 set 158-UL 2 No. 336 Undercutting Saw 1336-A 1 Handle with Bracket 1336-D 1 Handle Knob WGN 2 Wing Nut Lower Latch with 2 Rivets 2 Handles, Plates and Hardware Handle, 2 Clips and 4 Rivets Upper Latch with 2 Rivets No. 161-TH Trowel Handle 161-TH-NUT 2 Nut for No. 161-TH 161-TH-SCR 2 Screw for No. 161-TH No. 166 Duckbill Napping Shears 166-SCR 1 Screw for No. 166 No. 2-HDS Heavy Duty Scraper HDS-B 2 Bolt for Heavy Duty Scrapers HDS-N 2 Nut for Heavy Duty Scrapers No. 36-C Replace-A-Bar Towel Bar 24-36-01 2 Spring End for Replace-A-Bar Towel Bar No. 36-W Replace-A-Bar Towel Bar 24-36-01 2 Spring End for Replace-A-Bar Towel Bar No. 377-1 Ceramic Tile Hammer 377-RH 1 Handle for No. 377-1 Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. A-1 6/14/99 Gundlach Parts List P-101 Appendix A. List of Parts Not Illustrated (continued) Item Number Qty. Used Item Number Description Qty. Used Description No. 4 Linoleum Truck 4LT-01 1 Upper Roller Cradle 4LT-02 1 Lower Roller Cradle 4LT-03 1 Left Upper Leg 4LT-04 1 Left Lower Leg 4LT-05 1 Right Upper Leg 4LT-06 1 Right Lower Leg 4LT-07 4 Leg Brace 4LT-08 1 Nose Plate 4LT-09 1 Wheel and Caster Frame 4LT-10 2 Swivel Caster with Nut and Washer 4LT-11 2 Wheel with Washers and Cotter Pin 4LT-12 1 Right Wooden Handle 4LT-13 1 Left Wooden Handle 4LT-14 3 36" Roller 4LT-15 3 Axle Rod for Roller Note: References to ‘Left’ and ‘Right’ above are considered from the viewpoint of the user’s position behind the truck. No. 612-SW Seam Weight 612-SW-01 1 Plastic Bottom with Holes 612-SW-02 1 set 6 Nylon Spacers and 6 Screws No. 4-HDS Heavy Duty Scraper HDS-B 2 Bolt for Heavy Duty Scrapers HDS-N 2 Nut for Heavy Duty Scrapers No. 73 Gundlach Aluminum Hawk 141 1 Hawk Handle with Hardware 142 1 Callous Preventer for Hawks No. 400 Carbide Scoring Wheel 400-B 1 Bushing for No. 400 No. 735 Carpet Pad Knife 1735-E 1 set Screw and Nut for No. 735 No. 402-TS Tubing Section with Clips 402-TS-A 2 Spring Clip Assembly No. 41 4-in-1 Screwdriver 41-FB 1 3/16" and 5/16" Flat Bit 41-PB 1 PB1 and PB2 Phillips Bit 41-RT 1 4-1/2" Replacement Tube No. 737 Stretcher Hook 737-01 1 Body with No. 737-04 737-02 1 Prong 737-03 1 Locking Pin and Collar Assembly 737-04 1 5/16-18 x 1/2" Socket Set Screw 737-05 1 5/32" Short Arm Hex Key No. 4200 Wide Tail Block 4200-TBR 1 42" Tail Block Rubber No. 75-LR-WH Wheely Linoleum Roller 402-TS-A 2 Spring Clip Assembly No. 4202-T2 0704083 0901033 1211002 1602023 2104046 2104047 No. 790 Scraper 4-GRIP 1 4-SCR 1 set Jepson 4-1/2" Grinder 1 Switch 1 set Carbon Brushes (2/set) 1 Lock Nut Wrench 1 Side Handle 1 Inner Flange 1 Lock Nut No. 476 Carpet Tractor 476-AP 3 Axle Pin for Carpet Tractors 476-FW – Flat Washer for Carpet Tractors 476-PN 6 Pal Nut for Carpet Tractors 476-SW – Star Wheel for Carpet Tractors No. 488 Carpet Tractor 476-AP 1 Axle Pin for Carpet Tractors 476-FW – Flat Washer for Carpet Tractors 476-PN 6 Pal Nut for Carpet Tractors 476-SW – Star Wheel for Carpet Tractors 488-AP 2 Long Axle Pin for No. 488 No. 5 Ward Knife 5-RN 1 5-RS 1 Nut for No. 5 Screw for No. 5 No. 540 Ankorite Tool 540-P 1 Plunger for No. 540 No. 59 Carpet Row Cutter 59-1 1 Knob Screw 59-2 1 Blade Tab (Clamp) No. 6 Airway Knife 7-AK-LS 1 10-24 x 3/4" Flat Head Screw No. 6-SR Carpet Seaming Roller 3-SR-FW – Flat Washer for 3-SR and 6-SR 3-SR-SW – Star Wheel for 3-SR and 6-SR 476-PN 2 Pal Nut for Carpet Tractors 6-SR-AP 1 Axle Pin for No. 6-SR A-2 No. 690 Scraper 4-GRIP 1 4-SCR 1 set Grip for Nos. 690, 790 and 990 Screws for 690/790/990 (3/set) No. 7-AK Razor Blade Knife 7-AK-LS 1 10-24 x 3/4" Flat Head Screw 7-AK-SS 1 10-24 x 1/2" Flat Head Screw No. 7-APT Appliance Truck N8632 1 Strap for No. 7-APT No. 7-DK Dexter Knife 7-DK-1 1 Black Plastic End Cap No. 720 Razor Blade Knife 720-SCR 1 Screw for No. 720 Grip for Nos. 690, 790 and 990 Screws for 690/790/990 (3/set) No. 816 Carpet Tile Cutter 816-18G – 18" Gauge Scale (optional) 816-32G – 32 cm Gauge Scale (optional) 816-MB 6 Metal Bearing 816-N 4 1/4-20 Hex Nut 816-NB 1 Nylon Bearing and Screw 816-S 1 1/4-20 x 3/4" Round Head Screw WGN 2 Wing Nut No. 8210N/8210SC Jepson 4-3/8" Saws 0603001 1 Use No. 0604001 0604001 1 Ball Bearing, 608LLB 0604002 1 Ball Bearing, 626LLB 0604005 1 Ball Bearing, 6000LLB (8210SC) 0604011 1 Ball Bearing, 6201LLB 0704038 1 Switch 0901019 1 set Carbon Brushes (2/set) 0902003 2 Brush Holder Cap 1202023 1 Bearing Cap 1209160 1 Base Plate (8210N) 1209162 1 Pipe Clip (8210N) 1209481 1 Base Plate (8210SC) 1210010 1 Spanner 1606057 1 O-Ring 1606060 1 Vinyl Pipe 1606061 1 3/8" Hose Adapter 1606124 1 3/4" Hose Adapter 2104015 1 Inner Flange 2104016 1 Outer Flange 2106136 1 Hex Flange Head Bolt 2108027 1 Clamp Sleeve (8210N) 2201003 1 Woodruff Key 10 x 3 2403012 1 Thumb Bolt M5 x 12 (8210N) 2404015 1 Thumb Bolt M6 x 15 (8210SC) 2404030 1 Thumb Bolt M6 x 30 (8210N) 2412028 4 Pan Head Screw Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. Gundlach Parts List P-101 11/17/99 Appendix A. List of Parts Not Illustrated (continued) Item Number Qty. Used Description No. 8210N/8210SC Jepson 4-3/8" Saws (continued) 2604002 1 Socket Wrench 3004026 1 Blade Cover (8210N) 3004056 1 Blade Cover (8210SC) Item Number Qty. Used Description No. 843 Carpet Grabber 843-RR 1 set Retaining Ring for No. 843 (2/set) No. ENC-5418A DUO-FAST Electric Stapler (continued) DF-GO-213-3 1 Cord Clamp DF-GO-214L 1 Power Supply DF-GO-215-2 1 Plunger Armature DF-GO-215-3 1 Plunger Cap DF-GO-215-9 1 Trigger DF-GO-220-1S 1 Cap DF-GO-220-2 1 Bumper (Cap) DF-GO-316 1 Cord - 16/3 120V DF-GR-215-1 1 Plunger Blade DF-GR-412 1 Base No. 847-RW 847-IT 847-PW 847-WB No. F-14 Scraper F-14-BAR 1 F-14-NUT 4 F-14-SCR 4 No. 830 Carpet Base Cutter 830-1 1 Blade Holder, Hardware and Knob 830-2 1 3-Arm Knob for Blade Holder 830-3 1 10-24 x 1/2" Steel Thumb Screw (old style) Wheel with Tire for Carpet Carts 1 Inner Tube with Cotter Pin 1 Cotter Pin and Washer 2 Wheel Bearing with Cotter Pin No. 849 Carpet Dolly 849-RC 4 Caster for No. 849 No. 870 Stand-Up Concrete Nail Driver 870-GT 1 Guide Tube for No. 870 No. 952 Carpet Tractor 476-AP 3 Axle Pin for Carpet Tractors 476-FW – Flat Washer for Carpet Tractors 476-PN 6 Pal Nut for Carpet Tractors 952-RW – Roller Washer for No. 952 No. 990 Scraper 4-GRIP 1 4-SCR 1 set Grip for Nos. 690, 790 and 990 Screws for 690/790/990 (3/set) No. AST-30 Adjustable Straight Edge AST-30-01 1 Knob Screw for No. AST-30 No. CS-5000 DF-826 DF-8265 DF-842 DF-CT-201-4 DF-CT-201-6 DF-CT-201-7 DF-CT-201-8 DF-CT-201-9 DF-CT-202 DF-CT-210-5 DF-CT-210-6 DF-CT-212 DF-CT-220-3 DF-CT-320-1 DUO-FAST Squeeze Tacker 1 Trip Pawl Spring 1 Driver Blade 1 Staple Pusher Assembly 1 E-Ring 1 Outer Spring 1 Inner Spring 1 Handle Pin 1 Front Jaw Pin 1 Thrust Washer 1 Bumper 1 Plunger Body 1 Handle Spring 1 Handle Attachment 1 Handle No. DH-9-FPT Hand Truck HT-GRIP 2 Grip for Hand Truck No. DH-9-SP Hand Truck HT-GRIP 2 Grip for Hand Truck No. ENC-5418A DUO-FAST Electric Stapler DF-8124 1 Roll Pin DF-AN-425 1 Pusher DF-BN-103-1 2 Screw DF-GO-103-1 2 Flat Head Socket Cap Screw DF-GO-103-13 2 10-32 Socket Head Cap Screw DF-GO-105-2 2 Nut 8-32 DF-GO-105-3 2 Nut 10-32 DF-GO-110-2A 1 Plunger Disc Retaining Washer DF-GO-201-4 1 Trigger Pin DF-GO-203-1 1 6-32 Phillips Pan Head Screw DF-GO-203-19 2 Plastite Screw-Pan Head DF-GO-203-2 4 10-24 Torx Head Cap Screw DF-GO-203-4 1 8-32 Flat Head Cap Screw DF-GO-203-5 1 Lock-Weld Button Head Cap Screw DF-GO-210-1 1 Handle - Right Half DF-GO-210-2 1 Handle - Left Half DF-GO-212-1 1 Housing DF-GO-213-2 1 Bend Relief Blade Clamping Bar 1/4-20 Hex Nut 1/4-20 x 5/8" Hex Head Screw No. HT-550 DUO-FAST Hammer Tacker DF-5507A 1 Hammer Cap DF-5511B 1 Channel Block DF-5513 1 Feeder Bar Complete DF-5540A 1 Trip Lever Complete DF-7028C 1 Plunger Cam Complete DF-7043 1 Handle (Plastic) DF-7052A 1 Plunger Body Complete DF-7053C 1 Driver Blade DF-7066 1 Jaw Release Spring DF-708 3 Screw 5/16" 5-40 Flat Head DF-716 1 Feeder Spring Complete DF-723 1 Feeder Spring Stud DF-724 1 Feeder Spring Nut DF-727 1 Plunger Spring DF-729A 1 Plunger Cam Pin DF-730 1 Hammer Cap Roll Pin DF-744A 2 Screw 1/2" 10-32 Flat Head DF-745 1 Handle Lid DF-746 1 Handle Lid Stud DF-747 1 Handle Lid Stud Washer DF-762 2 Trip Lever Bushing DF-768 1 Trip Lever Pin DF-769 1 Trip Lever Pin Knob DF-770A 1 Hammer Cap Stud Roll Pin DF-824A 1 Jaw Pin Washer DF-HT-101-2 1 Front Jaw Pin DF-OR-007-60N 1 O-Ring No. HT-755 DUO-FAST Hammer Tacker DF-707 1 Hammer Cap DF-708 5 Screw 5/16" 5-40 Flat Head DF-711 1 Channel Block DF-713 1 Feeder Bar Complete DF-716 1 Feeder Spring Complete DF-723 1 Feeder Spring Stud DF-724 1 Feeder Spring Nut DF-727 1 Plunger Spring DF-729A 1 Plunger Cam Pin DF-743 1 Handle (Plastic) DF-744A 2 Screw 1/2" 10-32 Flat Head DF-745 1 Handle Lid DF-746 1 Handle Lid Stud DF-747 1 Handle Lid Stud Washer DF-752 1 Plunger Body DF-753A 1 Plunger Blade DF-756A 1 Front Jaw DF-762 2 Trip Lever Bushing DF-766 1 Jaw Release Spring DF-768 1 Trip Lever Pin DF-769 1 Trip Lever Pin Knob DF-770A 1 Hammer Cap Stud Roll Pin DF-824A 1 Jaw Pin Washer DF-HT-101-2 1 Front Jaw Pin DF-HT-142 1 Trip Lever DF-OR-007-60N 1 O-Ring Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. A-3 6/14/99 Gundlach Parts List P-101 Appendix A. List of Parts Not Illustrated (continued) Item Number Qty. Used Item Number Description No. HTT Handy Tile Tool HTT-3 1 Weight HTT-4 2 5/16-18 x 3-1/4" Hex Head Bolt HTT-5 2 5/16-18 Hex Nut HTT-6 2 Plastic Cap for No. HTT-1 Blade No. J200B Black J-Roller V300-RR 1 Rubber Roller with 2 Retaining Rings No. KA-12 Kut-All Tile Cutter KA-12-HC 1 Handle Casting for No. KA-12 KA-12-HS 2 1/4-20 x 1/2" Flat Head Screw No. KN-1848A/U DUO-FAST Pneumatic Stapler DF-HA-110 1 Screw DF-IN-103-8 1 8-32 x 1/2" Socket Head Cap Screw DF-ISN-105-2 1 Nut 10-32 DF-KN-100-2L 7 O-Ring DF-KN-100-5L 2 O-Ring DF-KN-101-1 1 Trigger Pin DF-KN-106-1 1 Step Washer DF-KN-110-13 1 Spring Post DF-KN-110-4 1 Cylinder Sleeve DF-KN-110-9 1 Yoke Spring DF-KN-112-2S 1 Trigger DF-KN-112-3A 1 Needle Valve DF-KN-112-4 1 Spring DF-KN-113-1 1 Cycle Valve DF-KN-113-2 1 Trigger Valve DF-KN-113-3 1 Safety Valve DF-KN-115-1 1 Piston DF-KN-115-2 1 Driver Blade DF-KN-120-3 1 Cap Gasket DF-KN-130-12 1 Pusher Spring DF-KN-130-2 1 Pusher DF-KN-133-3 1 Lower Yoke DF-KN-133-4 1 Yoke Cover Plate DF-KN-210-5 1 Bumper DF-KN-212-1 1 Valve Housing DF-KN-213-4 1 Valve Housing Gasket DF-KW-120-1 1 Cap DF-KW-120-2 1 Poppet DF-KW-120-3 1 Poppet Seal DF-KW-120-9 1 Dump Valve DF-KW-220-5 1 Exhaust Seal DF-LFN-114-1 1 Nose Plate DF-MS-120-7 1 Spring DF-OR-005-70L 1 O-Ring DF-OR-008-70L 2 O-Ring DF-OR-010-70L 1 O-Ring DF-OR-026-80N 1 O-Ring DF-OR-030-90N 1 O-Ring DF-OR-120-70L 1 O-Ring DF-OR-121-75V 1 O-Ring DF-OR-123-70N 1 O-Ring DF-OR-125-70L 2 O-Ring DF-OR-131-70L 1 O-Ring DF-RS-104-2 1 E-Ring No. M-3R Aviation Snips P406 1 Spring for No. M-3R No. M-60 Mixal Mixer A-2 1 B-2 2 C 1 D-2 2 E 1 F 1 G 2 H 1 J 1 K 4 L 2 M 1 A-4 Frame Foot Idle Bar Motor Bracket Idler Pulley and Sprocket Main Sprocket Cap V-Belt (A34) Chain Hoop Bracket Hoop Segment Motor Pulley Qty. Used Description No. M-60 Mixal Mixer (continued) Q 1 Pail with Lid R 1 Regular Paddle S-2 1 set Set of Bolts T 1 Sub Frame U 1 Tilt Spring Z 1 Chain Guard No. M50 Metalmiter Tool 1845F 1 Spring for No. M50 No. M900 Metalmiter Die Set 1846H 2 Spring for Metalmiter Die Sets RP-M900 1 Punch only for No. M900 No. M900GS Metalmiter Die Set 1846H 2 Spring for Metalmiter Die Sets RP-M900GS 1 Punch only for No. M900GS No. M900GSS Metalmiter Die Set 1846H 2 Spring for Metalmiter Die Sets RP-M900GSS 1 Punch only for No. M900GSS No. MSE-n Magnesium Straight Edges MSE-P 2 End Plug for Magnesium Straight Edge Nos. MSE-4 through MSE-16 No. ND-180 12279 45314 45327 45850 Rubi Tile Saw with 7" Blade 2 Small Adjustment Knob for Rubi Saws 2 Large Adjustment Knob for Rubi Saws 1 Water Pan for Nos. ND-180 and ND-200 1 Blade Guard for Nos. ND-180 and ND-200 No. ND-200 12279 45314 45327 45850 Rubi Tile Saw with 8" Blade 2 Small Adjustment Knob for Rubi Saws 2 Large Adjustment Knob for Rubi Saws 1 Water Pan for Nos. ND-180 and ND-200 1 Blade Guard for Nos. ND-180 and ND-200 No. ND-300 12279 45314 45527 45855 Rubi Tile Saw without Blade 2 Small Adjustment Knob for Rubi Saws 2 Large Adjustment Knob for Rubi Saws 1 Water Pan for No. ND-300 1 Blade Guard for No. ND-300 No. SH-9-FPT Hand Truck HT-GRIP 1 Grip for Hand Truck No. SH-9-SP Hand Truck HT-GRIP 1 Grip for Hand Truck No. SK-SK Skat Skater SK-SK-A 2 Slotted Arm SK-SK-B 2 Solid Arm SK-SK-C 16 Caster No. ST-18 DUO-FAST Strike Tacker DF-3636 1 10-32 Lock Nut DF-824A 2 Jaw Pin Washer DF-AA-40 1 Retaining Ring DF-DA-231-5 1 Cover Cam Lock DF-DA-231-6 1 Cam Lock Pivot Pin DF-DA-231-7 1 Cam Lock Spring DF-DA-231-8 2 Cam Lock Spacer DF-EA-108 1 Stud DF-EA-121 1 Plunger Spring DF-EA-124 1 Bumper DF-EA-127 1 Stud DF-EA-129 1 Magazine Cover Assembly DF-EA-145 2 10-32 Right Hand Screw DF-EA-146 1 Rear Raceway and Spring Guide DF-EA-147 1 Staple Pusher Spring DF-EB-109 1 Track Assembly DF-EB-122 1 Driver Blade DF-EB-137 1 Staple Pusher DF-XH-103-3 4 Screw DF-XK-1004 1 Flush Base Kit Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. Gundlach Parts List P-101 6/14/99 Appendix A. List of Parts Not Illustrated (continued) Item Number Qty. Used It N Description No. TD-1 Toilet Dolly TD-1-RDC 1 Replacement Drain Cap with Washer No. TLD Tile Layers Dolly SK-SK-C 4 Caster No. TS-30 Rubi Tile Cutter 170354 1 Support Stop for Nos. TS-30 and TS-40 (15109) 170364 1 Separator Lever for TS Cutters (07872) 170365 1 Scoring Handle for TS Cutters (15118) 170955 1 Complete Case for No. TS-30 170956 2 Latch for No. TS-30 Case 171728 1 Separator Assembly for TS Cutters (07933, includes 170364) 177267 1 Center Slide Assembly for Nos. TS-30 and TS-40 (15883) 177352 2 Knob for TS Cutters 180076 1 Backstop for Nos. TS-30 and TS-40 No. TS-40 Rubi Tile Cutter 170354 1 Support Stop for Nos. TS-30 and TS-40 (15109) 170364 1 Separator Lever for TS Cutters (07872) 170365 1 Scoring Handle for TS Cutters (15118) 170957 1 Complete Case for No. TS-40 170958 2 Latch for No. TS-40 Case 171728 1 Separator Assembly for TS Cutters (07933, includes 170364) 177267 1 Center Slide Assembly for Nos. TS-30 and TS-40 (15883) 177352 2 Knob for TS Cutters 180076 1 Backstop for Nos. TS-30 and TS-40 No. TS-60 Rubi Tile Cutter 170364 1 Separator Lever for TS Cutters (07872) 170365 1 Scoring Handle for TS Cutters (15118) 170520 1 Support Stop for No. TS-60 (15652) 171728 1 Separator Assembly for TS Cutters (07933, includes 170364) 177350 2 Latch for No. TS-60 Case 177351 1 Complete Case for No. TS-60 177352 2 Knob for TS Cutters 180083 1 Backstop for No. TS-60 180086 1 Center Slide Assembly for No. TS-60 (15884) No. V300 Pressure Roller V300-RR 1 Rubber Roller with 2 Retaining Rings Orcon Iron Parts 3500 1 3501 1 set 3503 1 3504 1 3505 1 3506 1 3507 1 3508 1 3511 1 3512 1 3513 1 3514 1 3515 3520 3521 3522 3524 3525 3528 3529 3530 3531 3532 3533 1 1 1 1 1 1 1 1 1 1 1 1 120V Cord Set Handle Set with 7 Screws Narrow Iron Heat Shield with 2 Screws Narrow Iron Holder 120V Internal Wire Set Grooved Base Thermostat with Extension Post and Screw Calibration Knob Element Mounting Plate Narrow Iron Heat Shield Gasket Narrow Iron Handle Gasket 800W Heating Element for all 120V Orcon Irons Flat Base Flat Self-Cleaning Base Seam-Loc Self-Cleaning Base Grooved Self-Cleaning Base Wide Iron Heat Shield Gasket Wide Iron Handle Gasket Wide Iron Holder Wide Iron Heat Shield with 2 Screws Narrow Iron Paper Insulator Wide Iron Paper Insulator Grooved Wide Self-Cleaning Base Iron Screws Complete Set If you need a part for a product not listed in this Parts List, or the current product catalog, please contact us as we may be able to obtain the desired part. Beno J. Gundlach Company • P.O. Box 544 • Belleville, IL 62222 • U.S.A. A-5 6/14/99 Gundlach Parts List P-101 Alphanumeric Index 0 00 Superior Ceramic Tile Cutter ................. 18 00-400 Superior Ceramic Tile Cutter .......... 18 030X Crain Ceramic Tile Cutter .................. 19 032X Crain Ceramic Tile Cutter .................. 19 033X Crain Ceramic Tile Cutter .................. 19 045X Crain Heavy Duty Ceramic Tile Cutter ... 19 1 100-LR Gundlach Linoleum Roller ............. 12 104 Tackless Strip Cutter ........................... 16 106-xx Divider ............................................. 15 107 Mini-Stretcher ....................................... 11 107-SRA Seam Repair Attachment ............ 11 108-xx Divider ............................................. 15 15 Linoleum Dolly .......................................... 8 150-LR Gundlach Linoleum Roller ............. 12 177-FB Hot Melt Iron ..................................... 2 177-GB Hot Melt Iron .................................... 2 182-FB Hot Melt Iron ..................................... 3 182-GB Hot Melt Iron .................................... 3 196-CCC Cushion Back Trimmer ................. 5 1A Superior Ceramic Tile Cutter ................. 18 1A-400 Superior Ceramic Tile Cutter ......... 18 1AA Superior Ceramic Tile Cutter .............. 18 2 205C Divider ................................................ 15 206C Divider ................................................ 15 214 Carpet Kicker ....................................... 10 222-AR Airway Roller .................................... 1 245 Carpet Trimmer ...................................... 4 246 Carpet Trimmer ...................................... 4 25 Linoleum Dolly .......................................... 8 2822 Uni-Lift Heavy Mover ........................... 8 2A Superior Ceramic Tile Cutter ................. 18 2A-400 Superior Ceramic Tile Cutter ......... 18 2AA Superior Ceramic Tile Cutter .............. 18 3 3-400 Superior Ceramic Tile Cutter ............ 18 333-AR Extension Handle Roller .................. 1 338 Universal Cutting Tool .......................... 16 375 Big Scraper ............................................ 1 375S Big Scraper .......................................... 1 377-FB Hot Melt Iron ..................................... 3 377-GB Hot Melt Iron .................................... 3 4 4-400 Superior Ceramic Tile Cutter ............ 18 400-CS Junior Carpet Stretcher ................... 9 4AA Superior Ceramic Tile Cutter .............. 18 6 677-GB Hot Melt Iron .................................... 3 7 716 Carpet Trimmer ...................................... 4 75-LR Gundlach Linoleum Roller ................ 12 750-A Electric Heat Gun .............................. 2 8 800 Super Saw .............................................. 6 800V Super Saw ........................................... 6 848 Carpet Crane ......................................... 8 9 950 Measuring Wand .................................. 16 951 Standup Cutter ....................................... 5 973-BP Cove Base Gun ............................. 15 974 Cove Base Gun ................................... 15 B B-91 Propane Blow Torch ............................. 7 B-91T Propane Blow Torch ........................... 7 C Carpet Crane ................................................. 8 Carpet Kickers ............................................ 10 Carpet Stretchers .................................. 9, 11 Carpet Trimmers ........................................... 4 Ceramic Tile Cutters .............. 18, 19, 20, 21 Cove Base Guns ........................................ 15 Crane, Carpet ................................................ 8 CT-1R Clinker Tile Cutter ............................ 20 Cutter Standup ..................................................... 5 Tackless Strip ......................................... 16 Cutters, Ceramic Tile ............. 18, 19, 20, 21 Cutting Tool, Universal ................................ 16 D Dividers ....................................................... 15 Dollies, Linoleum ........................................... 8 E Exchange and Repair Programs ................ 22 G Gundlach Junior and Senior Tile Saw Mandrel Exchan ............................................... 22 H H-24 24" Tile Cutter .................................... 14 H-76 Tile Cutters ......................................... 14 H2B Staple Hammer ................................... 13 H2B-1/2 Staple Hammer ............................. 13 Hammers, Staple ........................................ 13 Heat Gun, 750-A ........................................... 2 Hot Melt Iron Exchange Program ............... 22 Hot Melt Irons ................................................ 2 I Irons, Hot Melt ............................................... 2 J JTS Junior Tile Saw .................................... 17 K Kickers, Carpet ........................................... 10 KT-150 Deluxe Carpet Stretcher .................. 9 KT-260 Carpet Kicker .................................. 10 L Linoleum Dollies ............................................ 8 Linoleum Rollers .......................................... 12 M MC-14 Tile Cutter ........................................ MC-500R Tile Cutter ................................... MC-600R Tile Cutter ................................... MC-700R Tile Cutter ................................... Measuring Wand ......................................... 20 20 20 21 16 P Propane Blow Torches .................................. 7 R R-1 Edge Binding Stapler ............................ 12 R-11 Staple Hammer .................................. 13 Repair and Exchange Programs ................ 22 Rollers ........................................................... 1 S Saws. See also Tile Saws Super Saw .............................................. 15 Tile Saws ................................................ 17 Universal Cutting Tool ............................. 16 Scrapers ........................................................ 1 Seam Repair Attachment ............................ 11 Standup Cutter .............................................. 5 Staple Hammers ......................................... 13 Staplers ................................................ 12, 13 Stretchers, Carpet ................................. 9, 11 Strip Cutter, Tackless .................................. 16 STS Senior Tile Saw .................................... 17 Superior Tile Cutter® Nipper Repair Program 22 T Tackless Strip Cutter .................................. 16 Tile Cutters .................................................. 14 Tile Cutters, Ceramic ............. 18, 19, 20, 21 Tile Saws ..................................................... 17 Torches ......................................................... 7 Trimmers, Carpet .......................................... 5 U Uni-Lift Heavy Mover .................................... 8 Universal Cutting Tool ................................. 16 See Appendix A. List of Parts Not Illustrated for items not listed here.
Similar documents
2010 PDF E-Catalog Cover FINAL
FLATOUT “SABERSEAL” MLS HEAD GASKETS FLATOUT GASKETS is proud to offer the finest “MLS” or Multi-Layer Steel head gaskets available today! Multi-Layer Steel head gaskets offer the best torque reten...
More information