Softail - Harley-News

Transcription

Softail - Harley-News
Page 207
Page 206
Price Non-Price Common
207
206
Softail
put
your signature on ours.
We set out to build the very essence of the Harley-Davidson
motorcycle. And what emerged was the Softail – a bike with classic
hardtail looks and plenty of space where you can leave your mark.
2003 flstci Stock Production Paint, 100th Anniversary two-tone – Sterling Silver and Vivid Black
14287
VSA Partners
Harley-Davidson
Page 208
Page 209
Price Non-Price Common
Price Non-Price Common
209
208
heritage Softail classic
This Heritage Softail Classic is a perfect
blend of old and new, featuring Headlamp,
Passing Lamp and Turn Signal Trim Rings,
Wide Beach Handlebar and 100th Anniversary
Tank Panel, with old-school looks courtesy
of the Nostalgic and “Classic Chrome”
Collections.
NEW BEACH BARS FOR HERITAGE CLASSIC
56364-02
NEW JIFFY STAND STRAP AND
FASTENER KIT
50306-02
2003 flstci Stock Production Paint, 100th Anniversary Two-Tone – Sterling Silver and Vivid Black
NEW SWINGARM PIVOT BOLT AND NUT KIT
47119-02
HEADLAMP TRIM RING
69626-99
CHROME FRONT FENDER SKIRT
59228-91
NEW COMBINATION SPEEDO/TACH KIT
74461-03
PASSING LAMP TRIM RINGS
69622-99A (pair)
CHROME FORK COVER KIT
67890-91A
NEW CHROME LOWER TRIPLE TREE COVER
66053-01
TURN SIGNAL TRIM RINGS
69740-01
(2 sets)
NOSTALGIC HAND GRIPS
56275-96A
NEW 100TH ANNIVERSARY TANK PANEL
62075-03
CHROME UPPER FORK SLIDER COVERS
45963-97
NEW WIDE WHITEWALL TYRE
43118-92A Front
CHROME LOWER FRONT FORK SLIDERS
46482-00
Softail
CHROME HAND CONTROL
LEVER KIT
45075-96
43353-03
Rear
NEW SWINGARM PIVOT AXLE KIT
47119-02
CLASSIC CHROME FRONT
AXLE NUT COVER KIT
43899-86A
14287
VSA Partners
Harley-Davidson
CHROME CLUTCH BRACKET AND MASTER
CYLINDER RESERVOIR KIT
45284-99
CHROME VOLTAGE REGULATOR COVER
74597-01
OIL PRESSURE GAUGE KIT
75133-99
BRAIDED OIL LINES
63860-00
CHROME SWITCH HOUSING KIT
70222-96
NOSTALGIC SHIFTER PEGS
34627-99
(2)
CHROME MASTER CYLINDER COVER
45078-96A
RIDER FOOTBOARD ASSEMBLY, OLD STYLE
50599-89T (2 sets)
NOSTALGIC BRAKE PEDAL PAD
44248-96
SOFTAIL FRAME TRIM SET
47300-88T
PROFILE LOW SUSPENSION
54596-94
Front
54648-00
Rear
HARLEY-DAVIDSON SOFTAIL SLIP-ON
MUFFLERS
80378-00
Slash Down
LAYBACK LICENSE PLATE
MOUNTING KIT
59817-00
14287
VSA Partners
Harley-Davidson
Page 210
Price Non-Price Common
Price Non-Price Common
210
211
Softail standard
The all-new Black Bones Radical Custom Paint
scheme forms the centrepiece of this Softail
Standard, which features road-hugging Profile
Low Rear Suspension and Baloney Cut Slip-On
Mufflers. A new Slotted Style Heel Rest Kit,
Brake Pedal Pad and Pegs combine with front
and rear Mirror Chrome ThunderStar Wheels to
add polish to this custom brute.
NEW SLOTTED STYLE HEEL REST PEG KIT
50288-02
CHROME LOWER FORK SLIDERS
46477-00
NEW SLOTTED STYLE BRAKE PAD
42799-02
Small
BILLET TRIPLE TREE KIT
45748-01
NEW 100TH ANNIVERSARY BADLANDER SEAT
53304-03
CHROME FRONT CALIPER KIT
44395-00
THUNDERSTAR MIRROR CHROME WHEEL
43602-00
21" Front
CLASSIC CHROME BRAKE CALIPER INSERTS
44477-99
(2)
43649-00
NEW RADICAL PAINT —
BLACK AND BONE WHITE
95703-03BGB
NEW SLOTTED STYLE
SHIFTER PEG
34673-02
(2 sets)
2003 fxst Colour Shop Radical Paint, Bones—Black and Bone White
16" Rear
THUNDERSTAR FLOATING BRAKE ROTOR
44365-00
Front
44366-00
Rear
THUNDERSTAR BILLET SPROCKET
40126-00
CLASSIC CHROME FRONT AXLE NUT COVERS
43899-86A
CONTOURED CHROME & RUBBER
HAND GRIPS
56459-01
BILLET MINI TACH MOUNT
AND HANDLEBAR CLAMP
68962-98
BILLET STYLE REAR
BRAKE LEVER
42632-00
CUSTOM HAND CONTROL LEVERS
45459-02
SKULL LEATHER TANK PANEL
91001-01
CHROME SWITCH HOUSING KIT
70222-96
HARLEY-DAVIDSON AIR CLEANER COVER
29754-01
CHROME REAR
CALIPER KIT
44414-01
CHROME MASTER CYLINDER
COVER
45078-96A
“H-D MOTOR CO.” TIMER COVER
32691-99
Satin Chrome
SMOKED TURN SIGNAL LENSES
69304-02
CHROME CLUTCH BRACKET AND MASTER
CYLINDER RESERVOIR KIT
45284-99
OVAL BAR & SHIELD BILLET STYLE MIRRORS
91962-98
MINI TACH KIT
67848-96B
SLIP-ON MUFFLERS,
BALONEY CUT
80375-00
Shorty Dual
Style
SLOTTED STYLE FOOTPEGS
43280-01
(2 sets)
SIX-SHOOTER REAR AXLE
COVER AND ADJUSTER
48179-98A
BILLET HEEL RESTS FOR
FORWARD CONTROLS
50227-01
PROFILE LOW REAR
SUSPENSION
54648-00A
Page 212
Price Non-Price Common
Price Non-Price Common
212
213
Softail deuce
When this Deuce rumbles to life, it’s poetry in
motion thanks to the elegance of its new Select
Bright Pearl White-over-White Ghost Flames
Paint scheme and Chrome Slotted Six-Spoke
Wheels. More custom appeal is supplied by a
full complement of Smooth Chrome Grips,
Pegs and Pads, and other choice options like a
Mini-Tach Mount Kit and Chrome-Plated
Swingarm.
NEW GHOST FLAMES SELECT
PAINT – BRIGHT PEARL WHITE
OVER WHITE
95704-03BFJ
2003 fxstd Colour Shop Select Paint, Ghost Flame—Bright Pearl White over White
NEW LOW-PROFILE OSTRICH SEAT
52074-02
Icarus Pattern
CLASSIC CHROME FLOATING BRAKE ROTOR
44821-00
Front
HARLEY-DAVIDSON AIR
CLEANER COVER
29754-01
44822-00
DOMED BILLET STYLE MIRRORS
91519-99
CHROME PUSHROD COVER KIT
18096-00
HEADLAMP TRIM RING
69624-99A
MINI TACH KIT
67941-96B
CHROME BILLET LIFTER COVERS
18088-02
NEW DEUCE MINI TACH
MOUNT KIT
69188-02
SCREAMIN’ EAGLE CHROME
FORK BRACE
46265-02
CLEAR TURN SIGNAL LENS KIT
69303-02
Bullet
NEW BULLET STYLE SHIFT LINKAGE
34616-02
CHROME LOWER TRIPLE TREE COVER
66021-00
CHROME CLUTCH BRACKET AND
MASTER CYLINDER RESERVOIR KIT
45284-99
SMOOTH CHROME BILLET HEEL RESTS FOR
FORWARD CONTROLS
50262-01
NEW BULLET SHIFT LEVER
34604-02
CHROME FRONT CALIPER KIT
44395-00
CHROME SWITCH HOUSING KIT
70222-96
NEW CHROME SIX SPOKE SLOTTED
CUSTOM WHEEL
43934-02
17" Rear
43924-02
21" Front
NEW BUCKSHOT HAND
CONTROL LEVERS
45430-02
Rear
CONTOURED CHROME AND RUBBER CUSTOM
HAND GRIPS
56459-01
SMOOTH CHROME SHIFTER PEG
43122-01
SMOOTH CHROME BILLET FOOTPEGS
43120-01
Large
43122-01
Small
CHROME-PLATED SWINGARM FOR
SOFTAIL
48442-00
CHROME REAR CALIPER KIT
44414-01
CHROME FORWARD CONTROL BRACKETS
33920-00
CHROME SIX SPOKE SLOTTED SPROCKET
40447-01
SMOOTH CHROME BRAKE PEDAL PAD
42689-02
Small
SLIP-ON MUFFLERS, BALONEY CUT
80381-00
Shotgun Style
Page 214
Price Non-Price Common
214
215
Fat boy
On the left, accessories from the 100th Anniversary
Collection are combined with Softail Leather
Saddlebags and a Fat Boy Double Bucket Seat for
custom mile munching, while the Fat Boy on the
right announces its custom presence with new
Real Fire Radical Custom Paint, matching Flame
Handgrips and Mirror Chrome ThunderStar
Custom Wheels.
LEFT PAGE
NEW 100TH ANNIVERSARY
BILLET COLLECTION
32113-03
Timer Cover
25001-03
Derby Cover
2003 flstf/i Stock Production Paint, 100th Anniversary—Vivid Black
;
Colour Shop Radical Paint, Real Fire—Black with Blue Flame
NEW 100TH ANNIVERSARY
AIR CLEANER INSERT
29019-03
NEW RIGID CHROME SIDEPLATES
53378-03
DETACHABLE LOW-PROFILE
WINDSHIELD
58651-97A Lightly Smoked
PASSING LAMP TRIM RINGS
69622-99A
SHORT RAIL UPRIGHT
52737-94A
CHROME LOWER FORK SLIDERS
46482-00
Front
SOFTAIL LEATHER SADDLEBAGS
92000-00A
FAT BOY SLOTTED WHEEL
41022-00
Front
41017-00
Rear
CHROME HEADLAMP NACELLE
67907-96
CHROME LOWER BELT GUARD
60316-00
HEADLAMP TRIM RINGS
69627-99
FAT BOY DOUBLE BUCKET SEAT
51570-00
HALOGEN FOG LAMP KIT
68247-98
SMOOTH SHORT RAIL BACKREST PAD
52517-94
Smooth
RIGHT PAGE
NEW REAL FIRE RADICAL CUSTOM PAINT —
BLACK WITH BLUE FLAME
95710-03BFY
NEW FLAME HAND GRIPS
56518-02
NEW 100TH ANNIVERSARY BILLET AIR
CLEANER INSERT
29797-02
SCREAMIN’ EAGLE EFI
STAGE I KIT
29756-01
MIRROR CHROME THUNDERSTAR
CUSTOM WHEEL
43609-00
16" Front
BILLET AIR CLEANER
29745-00
43649-00
ENGINE/TRANSMISSION
COVERS
66508-00
Side
66510-00
Top
CHROME UPPER FORK SLIDER
COVERS
45963-97
CHROME LOWER FORK SLIDERS
46482-00
16" Rear
LOW-PROFILE STITCHED SEAT
52436-02
Rider Pattern
CHROME-PLATED SWINGARM FOR
SOFTAIL MODELS
48442-00
LAYBACK LICENCE PLATE MOUNT
59817-00A
PROFILE LOW SUSPENSION
54596-94
Front
54648-00
Rear
Page 216
Price Non-Price Common
Price Non-Price Common
216
217
heritage Springer
Nostalgic 1930s Olive Green and Black Select
Custom Paint brings out the history in this
Heritage Springer, whose muted tones allow
brilliant accessories like 100th Anniversary
Derby and Timer Covers to shine through.
Not a bike that likes to sit on a trailer, this
custom vision boasts a deep-breathing
Screamin’ Eagle Stage I Kit to enhance this
“old-timer’s” performance.
NEW SELECT OLIVE GREEN AND BLACK
30’S STYLE NOSTALGIC CUSTOM PAINT
95711-03BFN
2003 flstsi Select Custom Paint, 30’s Style Olive and Black
NEW 100TH ANNIVERSARY COVERS
32113-03
Timer
25001-03
Derby
NEW EFI FUEL FITTING COVER KIT
62883-02
NEW TURN SIGNAL RELOCATION KIT
90366-03
Rear
NEW DOCKING HARDWARE KIT
53931-03
Rear, for Rack
PASSING LAMP TRIM RINGS
68775-93T
NOSTALGIC HAND GRIPS
56275-96A
FINNED HEADBOLT BRIDGE
43859-00
Black
SOFTAIL FRAME TRIM SET
47300-88T
CLEAR TURN SIGNAL LENSES
69303-02
Bullet Style
CHROME HAND CONTROL LEVER KIT
45075-96
RIDER FOOTBOARD ASSEMBLY— OLD STYLE
50599-89T (2 sets)
BLACK SOFTAIL SWINGARM AXLE COVERS
47615-95B
HERITAGE SPRINGER FRONT FENDER TIP
59218-97
CHROME SWITCH HOUSING KIT
70222-96
CHROME SPROCKET COVER
91347-00
CLASSIC CHROME BRAKE ROTOR
44821-00
Front
CHROME FRONT MASTER CYLINDER COVER
45078-96A
POLISHED STAINLESS STEEL
SHIFT LINKAGE
33814-98A Round
44822-00
Rear
CLASSIC CHROME HEADLAMP VISOR
67750-88T
BULLSEYE CALIPER INSERT
44099-99
CLASSIC CHROME PASSING LAMP VISORS
67783-78T
CLASSIC TEARDROP MIRRORS
91971-98
(pair)
CHROME CLUTCH BRACKET AND MASTER
CYLINDER RESERVOIR KIT
45284-99
HERITAGE SPRINGER LEATHER
TANK PANEL WITH POUCH
61770-00
NOSTALGIC SHIFTER PEGS
34627-99
(2)
HERITAGE SPRINGER FENDER TIP
59895-97
Rear
NOSTALGIC BRAKE PEDAL PAD
44248-96
PROFILE LOW SUSPENSION
54648-00
Rear
HERITAGE SPRINGER RIDER BACKREST PAD
52826-97
Low
HERITAGE SPRINGER SOLO RACK
53903-00
Page 218
Price Non-Price Common
218
219
1
The Softail family’s combination of
timeless styling and uncompromising,
road-ready design has no equal on
the tarmac. Despite their “custom-out-ofthe-crate” appearance, the Softails are built
with personalisation in mind. And Genuine
Motor Parts and Accessories deliver options
designed to enhance your Softail’s look and
feel at every turn. Drop down with Profile
Low Suspension for laid-back, custom swagger,
and then keep the lines long and low with
the sculpted curves and custom-stitched patterns of our Exotic Seat Collection. Continue
with exclusive Softail accessories like our
Chrome-Plated Swingarm, built to Original
Equipment specifications for unparalleled
fitment and function with a brilliant finish.
Slip on a detachable windshield so you can
reduce fatigue on long-distance runs without
having to sacrifice your custom profile for trips around town. Or give a
nod to the past with a Chrome
Passing Lamp Kit, and then add the
final detail with a matching Chrome
Headlamp Nacelle. With Genuine
Motor Parts and Accessories, custom
Softail looks are just moments away.
Detachable King- Size Windshield
for FL Softail Models
Standard-Height, Smoked 57733-00, page 222
Low-Profile, Smoked 57734-00, page 222
2 Chrome Fork Cover Kit
67890-91a, page 294
3 Lighting Trim Rings
Headlamp 69626-99, page 230
Passing Lamp 69622-99a, page 230
Turn Signal 69740-01, page 230
1
Profile Low Rear Suspension
54648-00a, page 327
Instant
Classic
2
3
Chrome-Plated Swingarm for Softail Models
48442-00, page 296
Two-Up Custom Stitched Seat
with Ostrich Insert
53207-02, page 233
Page 220
Price Non-Price Common
220
Softail
Windshields
A. DETACHABLE SUPER SPORT WINDSHIELD
FOR SOFTAIL DEUCE MODELS
Add to the ground-breaking style of the Deuce, while
also protecting yourself from some of the elements.
This windshield features a Super Sport shape and
high-quality lightly smoked Lexan, along with polished
stainless steel mounting brackets that offer detachable convenience. Patented.
57837-00A
Fits ’00-later FXSTD models
(except FXSTDSE). Installation
requires the separate purchase
of Docking Hardware Kit
P/N 58397-00.
$234.95
B. DETACHABLE COMPACT
STANDARD-HEIGHT WINDSHIELD
FOR SOFTAIL DEUCE MODELS
These windshields, designed specifically for the
Deuce, feature partially hidden mounting brackets, a
unique U-shaped support and an engraved Bar &
Shield emblem for a clean look. Patented.
57090-00A
Clear.
Fits ’00-later FXSTD models
(except FXSTDSE). Requires
separate purchase of Docking
Hardware Kit P/N 58397-00.
$309.95
C. DETACHABLE COMPACT
LOW-PROFILE WINDSHIELD
FOR SOFTAIL DEUCE MODELS
Detachable compact low-profile lightly smoked Lexan
windshield. Mounting brackets designed to enhance
clean style of the Deuce. Patented.
57824-00A
Lightly Smoked.
Fits ’00-later FXSTD models
(except FXSTDSE). Requires
separate purchase of Docking
Hardware Kit P/N 58397-00.
SOFTAIL DEUCE DETACHABLE
WINDSHIELD DOCKING HARDWARE
(not shown) (Patented)
58397-00
Required for installation
of detachable windshields
on ’00-later FXSTD models
(except FXSTDSE).
$299.95
$69.95
A. DETACHABLE SUPER SPORT WINDSHIELD FOR SOFTAIL DEUCE MODELS
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. DETACHABLE COMPACT
STANDARD-HEIGHT WINDSHIELD
FOR SOFTAIL DEUCE MODELS
C. DETACHABLE COMPACT
LOW-PROFILE WINDSHIELD
FOR SOFTAIL DEUCE MODELS
14287
VSA Partners
Harley-Davidson
Page 221
Price Non-Price Common
221
Softail
Windshields
D. DETACHABLE SUPER SPORT
WINDSHIELD FOR SOFTAIL CUSTOM
AND DYNA WIDE GLIDE MODELS
Super is an apt description for this do-it-all shield.
Detachable convenience. Harley-Davidson sport
styling. High-quality, lightly smoked Lexan that
shields you from the elements. Patented.
57965-97A
Fits ’84-later FXST, FXSTC,
FXSTB, ’93-later FXDWG, ’80-’86
FXWG. (Does not fit FXSTD.)
Use Docking Hardware Kit
P/N 58350-96.
$204.95
DOCKING HARDWARE
FOR DETACHABLE WINDSHIELDS (Patented)
For 41mm Forks.
58350-96
Required for installation
of Detachable Windshields
P/Ns 58340-96, 58341-96,
57965-97A, 58627-99.
$69.95
E. SPORT WINDSHIELD KIT FOR SOFTAIL
CUSTOM AND DYNA WIDE GLIDE MODELS
Formed of Lexan polycarbonate and hard-coated to
resist scratching. Lightly smoked with Bar & Shield
Winged logo. Contoured to fit headlamp and incorporates adjustable four-point mounting. Functional styling
helps deflect wind to reduce upper body fatigue.
91820-85A
Fits ’84-later FXST, FXSTB,
FXSTC, and ’93-later FXDWG
and ’86-earlier FXWG models. $149.95
F. COMPACT WINDSHIELD KIT
FOR SOFTAIL CUSTOM MODELS
Formed of tough Lexan polycarbonate and hard-coated to resist scratching. Unique mounting system utilizes die-cast fork slider clamps which are designed
for height adjustment and are hand-polished and
chrome-plated. Chrome windshield cross braces offer
traditional Harley-Davidson styling. Mounts easily, can
be quickly removed.
58025-91B
Fits ’84-later FXST, FXSTC,
FXSTB and ’86-earlier FXWG models.
(Does not fit FXDWG and FXSTD
models.) Will not fit with Chrome
Billet Mini Tach Mount
P/N 68960-98.
$284.95
D. DETACHABLE SUPER SPORT WINDSHIELD FOR
SOFTAIL CUSTOM AND DYNA WIDE GLIDE MODELS
E. SPORT WINDSHIELD KIT
FOR SOFTAIL CUSTOM AND
DYNA WIDE GLIDE MODELS
F. COMPACT WINDSHIELD KIT
FOR SOFTAIL CUSTOM MODELS
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 222
Price Non-Price Common
222
Softail
Windshields
DETACHABLE COMPACT
WINDSHIELD FOR SOFTAIL CUSTOM
AND DYNA WIDE GLIDE MODELS
Get the convenience of detachables and the look of
lightly smoked Lexan in one easy-to-install windshield. This windshield is formed from a hard-coated
polycarbonate that resists scratching and abrasion.
Because it is designed to work with detachable docking hardware, this windshield comes on or off in less
than 60 seconds without tools. Patented.
A. Standard-Height, Lightly Smoked
58627-99
Fits ’84-later FXST, FXSTB,
FXSTC and ’93-later FXDWG.
Requires installation of Docking
Hardware Kit P/N 58350-96. Will
not fit with Chrome Billet Mini
Tach Mount P/N 68960-98.
$299.95
B. Standard-Height, Clear
58340-96
Fits ’84-later FXST, FXSTC,
FXSTB, and ’93-later FXDWG,
’80-’86 FXWG. (Does not fit FXSTD.)
Requires separate purchase of
Windshield Docking Hardware Kit
P/N 58350-96. Will not fit with
Chrome Billet Mini Tach Mount
P/N 68960-98.
$279.95
C. Low-Profile, Lightly Smoked
58341-96
Fits ’84-later FXST, FXSTC,
FXSTB, and ’93-later FXDWG,
’80-’86 FXWG. (Does not fit FXSTD.)
Requires separate purchase of
Windshield Docking Hardware Kit
P/N 58350-96. Will not fit with
Chrome Billet Mini Tach Mount
P/N 68960-98.
$299.95
DOCKING HARDWARE
FOR DETACHABLE WINDSHIELDS (Patented)
For 41mm Forks.
58350-96
Required for installation
of Detachable Windshields
P/Ns 58340-96, 58341-96,
57965-97A, 58627-99.
$69.95
SOFTAIL DETACHABLE
KING-SIZE WINDSHIELDS FOR
USE WITH PASSING LAMPS
This one-piece Lexan windshield is formed from hardcoated polycarbonate material to resist scratching.
The Lexan is attached to highly-polished stainless
steel mounting brackets supported by moulded-rubber bushings for improved isolation. It is offered in a
standard-height clear or lightly smoked, Lexan or
three-inch lower than stock, low-profile lightly smoked
Lexan. (Chrome Wind Deflector Kit P/N 58125-90A
can be used with this windshield kit on ’99-earlier
models.) Patented.
A. DETACHABLE COMPACT WINDSHIELD FOR SOFTAIL CUSTOM AND
DYNA WIDE GLIDE MODELS – STANDARD-HEIGHT, LIGHTLY SMOKED
D. Three-inch, Low-Profile, Lightly Smoked
57734-00
Fits ’00-later FLSTC models.
58275-95
(Additional mounting hardware
not required.)
$334.95
Fits ’86-’99 FLSTC and ’90-later
FLSTF, FLSTN models with passing
lamps. Includes mounting hardware.
(Does not fit FLSTS.)
$369.95
E. Standard-Height, Clear
58240-95
Fits ’86-’99 FLSTC and ’90-later
FLSTF, FLSTN models with passing
lamps. Includes mounting hardware.
(Stock on ’00 FLSTC.)
(Does not fit FLSTS.)
$339.95
Standard-Height, Lightly Smoked (not shown)
57733-00
Fits ’00-later FLSTC models.
58628-99
(Additional mounting hardware
not required.)
$334.95
Fits ’86-’99 FLSTC and ’90-later
FLSTF, FLSTN models with passing
lamps. Includes mounting hardware.
(Does not fit FLSTS.)
$369.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. DETACHABLE COMPACT WINDSHIELD FOR
SOFTAIL CUSTOM AND DYNA WIDE GLIDE
MODELS – STANDARD-HEIGHT, CLEAR
C. DETACHABLE COMPACT WINDSHIELD
FOR SOFTAIL CUSTOM AND DYNA
WIDE GLIDE MODELS – LOW-PROFILE,
LIGHTLY SMOKED
14287
VSA Partners
Harley-Davidson
Page 223
Price Non-Price Common
223
Softail
Windshields
F. DETACHABLE KING-SIZE
WINDSHIELDS FOR FL SOFTAIL MODELS
WITHOUT PASSING LAMPS
The Lexan windshield is formed from hard-coated
polycarbonate material to resist scratching and abrasion. Polished stainless steel mounting brackets are
supported by moulded-rubber bushings for improved
isolation. It is offered in a standard-height clear Lexan
or three-inch lower than stock, low-profile lightly
smoked Lexan. Comes complete with all the hardware
required to fit FLSTC, FLSTF and FLSTN models
without passing lamps. (Chrome Wind Deflector Kit
P/N 58125-90A can be used with this windshield kit
on ’99-earlier models. Windshield will not fit with
passing lamps.) Patented.
Standard-Height, Clear
58243-95
Fits ’86-’99 FLSTC, and ’90-later
FLSTF, FLSTN models without passing
lamps. (Does not fit FLSTS.)
$339.95
Three-inch, Low-Profile, Lightly Smoked
58278-95
Fits ’86-’99 FLSTC, and ’90-later
FLSTF, FLSTN models without passing
lamps. (Does not fit FLSTS.)
$364.95
REPLACEMENT WINDSHIELDS (not shown)
Change the look of your Heritage Softail Classic by
replacing your clear windshield with the darker hue of
lightly smoked Lexan, now in standard-height. Use
your existing hardware for a quick and easy change.
Standard-Height, Lightly Smoked
Replacement Lexan
57977-99
Fits ’86-later FLSTC, FLSTF,
FLSTN models equipped
with permanently mounted
King-Size Windshields.
$144.95
Standard-Height, Lightly Smoked
Replacement Lexan (not shown)
57975-99
Fits ’86-later FLSTC, FLSTF,
FLSTN models equipped with a
Detachable King-Size Windshield.
(Does not fit FLSTS.)
$149.95
Low-Profile, Lightly Smoked
Replacement Lexan
58316-95A Fits ’86-later FLSTC, FLSTF,
FLSTN models equipped with
a permanently mounted
King-Size Windshield.
(Does not fit FLSTS.)
D. SOFTAIL DETACHABLE KING-SIZE WINDSHIELD KIT FOR USE WITH
PASSING LAMPS – THREE-INCH, LOW-PROFILE, LIGHTLY SMOKED
E. SOFTAIL DETACHABLE KING-SIZE
WINDSHIELDS FOR USE WITH PASSING
LAMPS – STANDARD-HEIGHT, CLEAR
F. DETACHABLE KING-SIZE WINDSHIELDS
FOR FL SOFTAIL MODELS WITHOUT PASSING
LAMPS – STANDARD-HEIGHT, CLEAR
$134.95
Low-Profile, Lightly Smoked
Replacement Lexan
(not shown)
58277-95
Fits ’86-later FLSTC, FLSTF,
FLSTN models equipped with a
Detachable King-Size Windshield.
(Does not fit FLSTS.)
$144.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 224
Price Non-Price Common
224
Softail
Windshields
DETACHABLE KING-SIZE
NACELLE WINDSHIELD
Fits Softail models equipped with the Street Stalker
Headlamp Nacelle or the Chrome Headlamp Nacelle
Kit. Available for models with and without passing
lamps. Patented.
A. Standard-Height, Clear
58649-97A Fits ’86-later FLSTC, FLSTF and
FLSTN models equipped with
the Chrome Headlamp Nacelle
Kit P/N 67907-96. Fits with
passing lamps.
$359.95
B. Low-Profile, Lightly Smoked
58651-97A Fits ’86-later FLSTC, FLSTF and
FLSTN models equipped with
the Chrome Headlamp Nacelle Kit
P/N 67907-96. Fits with
passing lamps.
$384.95
C. Standard-Height, Clear
58652-97A Fits without passing lamps.
$359.95
Low-Profile, Lightly Smoked (not shown)
58653-97A Fits without passing lamps.
$384.95
REPLACEMENT WINDSHIELDS (not shown)
Standard-Height, Clear Replacement Lexan
58657-97A Fits ’86-later FLSTC, FLSTF
and FLSTN models equipped
with the Chrome Headlamp
Nacelle Kit P/N 67907-96.
$134.95
Low-Profile, Lightly Smoked
Replacement Lexan
58658-97A Fits ’86-later FLSTC, FLSTF
and FLSTN models equipped
with the Chrome Headlamp
Nacelle Kit P/N 67907-96.
$144.95
A. DETACHABLE KING-SIZE NACELLE WINDSHIELD – STANDARD-HEIGHT, CLEAR
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. DETACHABLE KING-SIZE
NACELLE WINDSHIELD –
LOW-PROFILE, LIGHTLY SMOKED
C. DETACHABLE KING-SIZE
NACELLE WINDSHIELD –
STANDARD-HEIGHT, CLEAR
14287
VSA Partners
Harley-Davidson
Page 225
Price Non-Price Common
225
NEW
Softail
Windshields
Upper Position
D. ADJUSTABLE HEIGHT
WINDSHIELD FOR FL SOFTAIL MODELS
Lower Position
This two-piece detachable windshield allows you to
tailor the screen height for maximum riding comfort.
The simple cam-lever adjustment permits the clear
upper section to be raised from 17" to 20" (measured
from the headlamp cut-out) to provide maximum
weather protection and visability. The dark-tinted lower
section conceals the adjustment feature, and small
raised dots provide vibration isolation. Patent pending.
57704-02
57703-02
Fits ’00-later FLSTC models.
Mounts using Original Equipment
windshield docking hardware. $419.95
Fits ’86-’99 FLSTC, ’90-later FLSTF
and FLSTN models equipped with
passing lamps. Includes required
docking hardware.
$454.95
KING-SIZE WINDSHIELDS – RIGID MOUNT
The Lexan windshield is formed from hard-coated,
lightly smoked polycarbonate material to resist
scratching and abrasion. The windshield comes with
mounting brackets that are adjustable for various
height settings and is a direct replacement for FLSTC
models. This windshield can also be installed on
FLSTF and FLSTN models with the addition of mounting bracket kit P/N 58155-90.
E. Low-Profile, Lightly Smoked
58319-95A Fits ’86-’99 FLSTC, and ’90-later
FLSTF, FLSTN models (FLSTF
and FLSTN require mounting
bracket kit P/N 58155-90).
(Does not fit FLSTS.)
$289.95
F. Standard-Height, Clear
58018-86A Fits ’86-’99 FLSTC, and ’90-later
FLSTF, FLSTN models (FLSTF
and FLSTN require mounting
bracket kit P/N 58155-90).
(Does not fit FLSTS.)
$259.95
FLSTF/FLSTN Windshield Bracket Kit
(not shown)
Includes brackets, chrome acorn lock nuts, and installation instructions.
58155-90
Required to install King-Size
Lexan Windshield Kit P/N
58018-86 on ’90-later FLSTF
and FLSTN models.
$13.95
RIGID-MOUNTED REPLACEMENT LEXAN
Standard-Height, Clear
58516-97
Fit ’86-later FLSTF, FLSTN and
D. ADJUSTABLE HEIGHT WINDSHIELD FOR FL SOFTAIL MODELS
E. KING-SIZE RIGID MOUNT WINDSHIELDS –
LOW-PROFILE, LIGHTLY SMOKED
F. KING-SIZE RIGID MOUNT WINDSHIELDS –
STANDARD-HEIGHT, CLEAR
’86-’99 FLSTC models equipped
with the Chrome Headlamp
Nacelle Kit P/N 67907-96.
$134.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 226
Price Non-Price Common
226
Softail
Windshields
A. DETACHABLE SUPER SPORT WINDSHIELD
FOR FX SPRINGER SOFTAIL MODELS
Super is an apt description for this do-it-all shield.
Detachable convenience. Harley-Davidson sport
styling. High-quality, lightly smoked Lexan that shields
you from the elements. Patented.
57969-97A
Fits ’93-later FXSTS, FXSTSB
models. Use Docking Hardware
Kit P/N 58907-96. Will not fit
with Chrome Billet Mini Tach
Mount P/N 67848-00.
$204.95
B. COTTON WINDSHIELD STORAGE BAG
This bag is constructed of breathable cotton material
and is flannel-lined for a scratch-free storage area.
The outside of the bag features an embroidered Bar &
Shield logo to match the cotton cycle covers.
95982-98
Fits all Harley-Davidson
windshields.
$64.95
C. SPRINGER SPORT WINDSHIELD KIT
Formed of Lexan polycarbonate and hard-coated to
resist scratches. Lightly smoked with Bar & Shield
Winged logo and contoured to complement the Springer
front fork styling. Four-point adjustable mounting system.
Designed to fit with or without Springer Passing Lamp Kit
P/N 68253-88A and Springer Horn Kit P/N 69036-88A.
58029-89B
Fits ’88-later FXSTS models and
Softail models equipped with Springer
Front End Kit P/N 46007-88A.
(Does not fit FLSTS models.)
$149.95
DOCKING HARDWARE FOR
DETACHABLE WINDSHIELDS
(not shown) (Patented)
58907-96
58350-96
Required for installation of
Detachable Windshields on
’93-later FXSTS, FXSTSB
and ’97-later FLSTS models.
Required for installation
of Detachable Windshields
P/Ns 58340-96, 58341-96,
57965-97A, 58627-99.
$69.95
$69.95
A. DETACHABLE SUPER SPORT WINDSHIELD FOR FX SPRINGER SOFTAIL MODELS
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. COTTON WINDSHIELD STORAGE BAG
C. SPRINGER SPORT WINDSHIELD KIT
14287
VSA Partners
Harley-Davidson
Page 227
Price Non-Price Common
227
Softail
Windshields
COMPACT DETACHABLE WINDSHIELD
FOR SPRINGER SOFTAIL MODELS (Patented)
D. Standard-Height, Clear
58770-96
Fits ’93-later FXSTS and FXSTSB;
’97-later FLSTS models. Installation
requires the separate purchase of
Windshield Docking Hardware Kit
P/N 58907-96. (Will fit with or
without passing lamps.) Will not
fit with Chrome Billet Mini Tach
Mount P/N 67848-00.
$294.95
E. Low-Profile, Lightly Smoked
58771-96
Fits ’93-later FXSTS and FXSTSB;
’97-later FLSTS models. Installation
requires the separate purchase of
Windshield Docking Hardware Kit
P/N 58907-96. (Will fit with or
without passing lamps.) Will not
fit with Chrome Billet Mini Tach
Mount P/N 67848-00.
$319.95
F. COMPACT WINDSHIELD KIT FOR
SPRINGER SOFTAIL MODELS
Formed of Lexan polycarbonate and hard-coated to
resist scratches. Features chrome mounting brackets.
Adjustable to various height settings. Designed to fit
with or without Springer Passing Lamp Kit P/N 6825388A and Springer Horn Kit P/N 69036-88A.
58044-88C
Fits ’88-later FXSTS models.
Also fits Softail models equipped with
Springer Front End Kit P/N 46007-88A.
(Does not fit FLSTS models.)
$294.95
D. COMPACT DETACHABLE WINDSHIELD FOR SPRINGER
SOFTAIL MODELS – STANDARD-HEIGHT, CLEAR
E. COMPACT DETACHABLE WINDSHIELD
FOR SPRINGER SOFTAIL MODELS –
LOW-PROFILE, LIGHTLY SMOKED
F. COMPACT WINDSHIELD KIT FOR
SPRINGER SOFTAIL MODELS
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 228
Price Non-Price Common
228
Softail
Windshields
HERITAGE SPRINGER KING-SIZE
DETACHABLE WINDSHIELD (Patented)
A. Standard-Height, Clear
58772-97
Fits ’97-later FLSTS models.
Installation requires the separate
purchase of Windshield Docking
Hardware Kit P/N 58907-96. Will
not fit with Chrome Billet Mini
Tach Mount P/N 67848-00.
$299.95
B. Low-Profile, Lightly Smoked
58783-97
Fits ’97-later FLSTS models.
Installation requires separate
purchase of Windshield Docking
Hardware Kit P/N 58907-96. Will
not fit with Chrome Billet Mini
Tach Mount P/N 67848-00.
$324.95
C. HERITAGE SPRINGER
KING-SIZE WINDSHIELDS
This one-piece, classic King-Size windshield completes the nostalgic look. Includes chrome-plated
steel mounting brackets.
Standard-Height, Clear
58533-97A Fits ’97-later FLSTS
Heritage Springer.
$299.95
Low-Profile, Lightly Smoked
58534-97A Fits ’97-later FLSTS
Heritage Springer.
$324.95
A. HERITAGE SPRINGER KING-SIZE DETACHABLE WINDSHIELD – STANDARD-HEIGHT, CLEAR
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. HERITAGE SPRINGER KING-SIZE
DETACHABLE WINDSHIELD –
LOW-PROFILE, LIGHTLY SMOKED
C. HERITAGE SPRINGER
KING-SIZE WINDSHIELDS –
STANDARD-HEIGHT, CLEAR
14287
VSA Partners
Harley-Davidson
Page 229
Price Non-Price Common
229
NEW
Softail
Headlamp Visor Kits
D. COLOUR-MATCHED
HEADLAMP VISOR KITS (DYNA WIDE
GLIDE/SOFTAIL CUSTOM)*
Add an element of racy style to stock headlamps with
these visors, available in prime or high-quality, colourmatched Harley-Davidson paint.
Fits ’84-’99 FXST, FXSTC and ’91-later FXDWG.
*NOTE: This product is a “paint to order” accessory.
Please allow an average of 5 weeks delivery for
this item.
Refer to the Colour Shop section for
a complete listing of colour options.
E. CHROME HEADLAMP VISOR KIT
Add an element of racy style to stock headlamps
with these visors. Kit includes necessary mounting
hardware.
69728-01
Fits ’91-later FXDWG models
and ’84-’99 FXST and FXSTC
models (except FXSTB).
$174.95
D. COLOUR-MATCHED HEADLAMP VISOR KITS (DYNA WIDE GLIDE/SOFTAIL CUSTOM)
NEW
D. COLOUR-MATCHED HEADLAMP
VISOR KITS (DYNA WIDE GLIDE/
SOFTAIL CUSTOM)
E. CHROME HEADLAMP VISOR KIT
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 230
Price Non-Price Common
230
Softail
Trim Rings
After
A. HEADLAMP TRIM RINGS
This chrome-plated headlamp trim ring extends
forward, giving the headlamp assembly a “Frenched”
look reminiscent of classic hot rod car designs by
recessing the headlamp and adding the appearance
of depth. Functions as a direct replacement for the
Original Equipment trim ring, except when used with
P/N 69627-99, where it easily installs over the Original
Equipment trim ring. Patented. (Does not fit with
Accessory Headlamp Visor or Passing Lamp Visor.)
69627-99
69626-99
69623-99A
69624-99A
Fits ’83-later Touring models
(except Tour Glide and Road
Glide). Fits ’94-later FLHR models
and ’86-later FLST models with
accessory Chrome Headlight
Nacelle P/N 67907-96.
$32.95
Fits ’94-later FLSTC, FLSTF and
FLSTN models. (not shown)
$32.95
Fits ’94-later FXST, FXSTB, FXSTC,
FXLR and Dyna models.
$28.95
Fits ’93-later FXSTS, ’95-’97
FXSTSB, ’96-later XL 1200C, XL
883C, ’99 FXR models and
’97-later FLSTS models.
Also fits FXSTD models.
$28.95
PASSING LAMP TRIM RINGS
A must-have complement to the Headlamp Trim Ring,
these chrome-plated passing lamp trim rings provide
the same “Frenched” look for passing lamps. Function
as a direct replacement for the Original Equipment trim
rings. Includes chrome hardware. Sold in pairs.
Patented.
69622-99A
Fits all ’62-later models with passing
lamps. Fits accessory Passing
Lamps Kit P/N 68250-80. (pair) $39.95
TURN SIGNAL TRIM RING KIT
Complete the “Frenched” look with these Turn Signal
Trim Rings. The chrome-plated trim rings match the
styling of Headlamp and Passing Lamp Trim Rings
69622-99A, 69626-99, and 69627-99. Easy to install,
the kit includes two trim rings.
69740-01
Before
Fits front or rear of ’88-later
Touring and Heritage Softail Classic
models, and Softail models equipped
with Turn Signal Relocation Kit
P/N 68413-99 or 68412-99.
$35.95
A. HEADLAMP, PASSING LAMP AND TURN SIGNAL TRIM RINGS – ROAD KING AND FL SOFTAIL
Before
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
FXSTC BEFORE HEADLAMP TRIM RING
After
FXSTC AFTER HEADLAMP TRIM RING
14287
VSA Partners
Harley-Davidson
Page 231
Price Non-Price Common
231
Softail
Before
Trim Rings
BULLET TURN SIGNAL TRIM RING KIT
Trim ring contour matches the turn signal housing and
extends out past the lens for a sleek appearance.
These easy-to-install chrome-plated trim rings with
amber or red lenses look great alone, or in combination
with Headlamp Trim Rings. Sold in pairs. From the
workshop of Wyatt Fuller.
B. Amber
69739-01
After
C. Red
69736-02
Fits all models equipped with
bullet style turn signals (except VRSC
rear signals and rear of models with
Auxiliary Turn Signal Brake Light Kits
P/N 68216-00 and 91698-02).
$29.95
Fits rear of all models (except
VRSC and International models)
equipped with bullet style turn
signals and Auxiliary Brake light Kit
P/N 68216-00 or 91698-02.
Not for International use.
$29.95
FLSTS AFTER HEADLAMP TRIM RING AND PASSING LAMP TRIM RINGS
B. BULLET TURN SIGNAL
TRIM RING KIT – AMBER
C. BULLET TURN SIGNAL TRIM RING KIT – RED
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 232
Price Non-Price Common
exotic Seats
The very latest from the Harley-Davidson
Exotic Seat Collection, these limited
production Custom Stitched saddles combine
superior construction with radical styling to
give you the ultimate custom accessory.
With contoured foam padding for added longhaul comfort, each seat is made from top grain
leathers for superior wear and attitude with
age. Decorative custom-stitching and available
ostrich leather inserts leave no doubt about your
attention to custom detail. Seat pans are
constructed from hand-laid fibreglass for extra
durability, and carpeted to protect your paint
finish. When it’s time to flex your custom
muscles, the Harley-Davidson Exotic Seat
Collection has the style you’re after.
Icarus Pattern
with Ostrich
Rider Pattern
Sweep Pattern
Scorpion Pattern
Fire Pattern
with Ostrich
Axe Pattern
Turbulence Pattern
Scimitar Pattern
Axe II Pattern
Menace Pattern
14287
VSA Partners
Harley-Davidson
Page 233
Price Non-Price Common
233
NEW
Softail
Ostrich Seats
A. SOLO OSTRICH SEAT
FOR SOFTAIL MODELS
Ride low-down in high style on this limited-production
custom solo seat. Made from the highest quality
materials, this custom stitched seat features a natural
ostrich skin insert, cowhide seating surface, and
contoured foam padding for long-haul comfort. Seat
has no visible mounting hardware for a clean custom
look. Seat width: 12".
Ostrich Seat – Fire Pattern
51252-02
Fits ’00-later FXSTD
51260-02
models (shown).
Fits ’00-later Softail models
(except FXSTD and FLSTS).
$469.00
$469.00
Ostrich Seat – Icarus Pattern
53262-02
Fits ’00-later Softail models (except
FXSTD and FLSTS models).
$469.00
52082-02
Fits ’00-later FXSTD models.
$469.00
B. LOW-PROFILE OSTRICH SEAT
FOR SOFTAIL MODELS*
A. SOLO OSTRICH SEAT FOR SOFTAIL MODELS – ICARUS PATTERN
NEW
The ultimate seat profile for your slammed ride, this
low-profile limited-production seat hugs the frame
and fender for a long and lean look. Crafted from
premium cowhide and natural ostrich leathers, this
premiere seat is constructed with a hand-laid fiberglass shell and high density padding for superior wear.
Seat width: 13". Pillion width: 5".
Ostrich Seat – Fire Pattern
51251-02
Fits ’00-later FXSTD
51259-02
models. Does not fit with
Sissy Bar Upright
P/N 51114-00 or 51144-02.
Fits ’00-later Softail
models (except FXSTD
and FLSTS) (shown).
$499.00
$499.00
Ostrich Seat – Icarus Pattern
53253-02
Fits ’00-later Softail
52074-02
models (except FXSTD
and FLSTS models).
Fits ’00-later FXSTD
models (Does not fit with
Sissy Bar Upright P/Ns
51114-00 and 51144-02).
$499.00
$499.00
C. TWO-UP OSTRICH SEAT
FOR SOFTAIL MODELS*
The two-up profile of this limited-production custom
seat maintains a lean look, but adds back support for
the rider, and additional padding for the passenger.
Made of the highest quality cowhide, and featuring a
one-of-a-kind genuine ostrich insert, this premium
seat offers a radical style with a touch of comfort. Seat
width: 13". Pillion width: 6".
B. LOW-PROFILE OSTRICH SEAT FOR SOFTAIL MODELS – ICARUS PATTERN
NEW
Ostrich Seat – Fire Pattern
51250-02
Fits ’00-later FXSTD models.
Fits ’00-later Softail
51258-02
models (except FXSTD
and FLSTS) (shown).
$499.00
$499.00
Ostrich Seat – Icarus Pattern
53207-02
Fits ’00-later Softail
52049-02
models (except FXSTD
and FLSTS models).
Fits ’00-later FXSTD models.
$499.00
$499.00
*NOTE: Two-up seats and seats with passenger
pillions require the use of a grab strap. See your
Harley-Davidson dealer for correct grab strap part
number if not included in seat kit.
NOTE: These seats are “made to order” please allow
1 – 2 weeks for delivery.
C. TWO-UP OSTRICH SEAT FOR SOFTAIL MODELS – FIRE PATTERN
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 234
Price Non-Price Common
234
NEW
Softail
Exotic Seats
A. SOFTAIL TWO-UP EXOTIC
OSTRICH SEAT WITH CUSTOM PILLION
Combine the long and lean styling of our low-profile
exotic seat with the back support of the two-up seat,
and you get the best of both worlds. These cowhide
saddles feature ostrich inserts, custom-stitched surfaces
and a tapered pillion for style, and a rider position
designed for comfort. Seat width: 13”. Pillion width: 5”.
Icarus Pattern
53534-02
Fits ’00-later Softail models (except
FXSTD and FLSTS models).
$499.00
B. COLOUR-MATCHED TAIL SECTION
FOR SOFTAIL DEUCE MODELS
Add a splash of colour behind your Deuce model’s
Solo Seat while hiding the rear fender’s Sissy Bar
Upright mounting holes with these exclusive colourmatched Tail Sections.
Fits ’00-later FXSTD models equipped with any GMA
Solo Seat for FXSTD models.
Refer to page 249 for a
complete listing of colour options.
A. SOFTAIL TWO-UP EXOTIC OSTRICH SEAT WITH CUSTOM PILLION – ICARUS PATTERN
C. SOLO CUSTOM STITCHED SEAT
FOR SOFTAIL MODELS
When it’s time to go it alone, go solo in style. These
premium quality cowhide leather saddles are highlighted with custom stitched patterns to create a subtle
and distinctive look, and feature “invisible” mounting
hardware for a clean appearance. Seat width: 12".
Deuce
Fits ’00-later FXSTD models.
51060-02
51061-02
51062-02
51063-02
52078-02
52079-02
52080-02
52081-02
53292-02
Axe Pattern.
Rider Pattern.
Scorpion Pattern.
Sweep Pattern.
Axe II Pattern.
Turbulence Pattern.
Menace Pattern.
Scimitar Pattern.
Plain.
$349.00
$349.00
$349.00
$349.00
$349.00
$349.00
$349.00
$349.00
$319.00
Softail
Fits ’00-later Softail models (except FXSTD and FLSTS).
51076-02
51077-02
51078-02
51079-02
53254-02
53256-02
53257-02
53259-02
53359-02
Axe Pattern.
Rider Pattern.
Scorpion Pattern.
Sweep Pattern.
Axe II Pattern.
Turbulence Pattern.
Menace Pattern.
Scimitar Pattern.
Plain.
$349.00
$349.00
$349.00
$349.00
$349.00
$349.00
$349.00
$349.00
$319.00
B. COLOUR-MATCHED TAIL SECTION FOR SOFTAIL DEUCE MODELS
NEW
D. LOW-PROFILE CUSTOM STITCHED
SEATS FOR SOFTAIL MODELS*
Another extraordinary installment from the Exotic Seat
Collection, these leather Low-Profile saddles feature
custom stitched patterns and smooth lines to create a
subtle and distinctive custom effect. Or go with a
smooth cover for that simple custom look. Seat width:
13". Pillion width: 5".
Deuce
Fits ’00-later FXSTD models. Does not fit with Sissy
Bar Upright P/N 51114-00 or 51144-02.
52365-02
52368-02
52366-02
52367-02
52055-02
52056-02
52057-02
52058-02
53289-02
Axe Pattern.
Sweep Pattern.
Rider Pattern.
Scorpion Pattern.
Axe II Pattern.
Turbulence Pattern.
Menace Pattern.
Scimitar Pattern.
Plain.
$369.00
$369.00
$369.00
$369.00
$369.00
$369.00
$369.00
$369.00
$339.00
(continued at top of next page)
*NOTE: Two-up seats and seats with passenger
pillions require the use of a grab strap. See your
Harley-Davidson dealer for correct grab strap part
number if not included in seat kit.
C. SOLO CUSTOM STITCHED SEAT FOR SOFTAIL MODELS – SCIMITAR PATTERN
14287
VSA Partners
Harley-Davidson
Page 235
Price Non-Price Common
235
NEW
Softail
Custom Stitched Seats
(continued from bottom of previous page)
Softail
Fits ’00-later Softail models (except FXSTD and FLSTS).
52423-02
52458-02
52436-02
52457-02
53208-02
53224-02
53226-02
53227-02
53367-02
Axe Pattern.
Sweep Pattern.
Rider Pattern.
Scorpion Pattern.
Axe II Pattern.
Turbulence Pattern.
Menace Pattern.
Scimitar Pattern.
Plain.
$369.00
$369.00
$369.00
$369.00
$369.00
$369.00
$369.00
$369.00
$339.00
E. TWO-UP CUSTOM STITCHED
SEAT FOR SOFTAIL MODELS*
Share your custom ride. The two-up design of these
premium cowhide leather seats offers a frame
hugging look, but adds back support for the rider, and
additional padding for the passenger. The custom
stitched design on the seating surface, and the
hand-laid fiberglass seat base show attention to detail
second to none. Or go with a smooth cover for that
simple custom look. Seat width: 13". Pillion width: 6".
D. LOW-PROFILE CUSTOM STITCHED SEATS FOR SOFTAIL MODELS – PLAIN
NEW
Deuce
Fits ’00-later FXSTD models.
51064-02
51065-02
51066-02
51067-02
52019-02
52021-02
52029-02
52040-02
53288-02
Axe Pattern.
Rider Pattern.
Scorpion Pattern.
Sweep Pattern.
Axe II Pattern.
Turbulence Pattern.
Menace Pattern.
Scimitar Pattern.
Plain.
$369.00
$369.00
$369.00
$369.00
$369.00
$369.00
$369.00
$369.00
$339.00
Softail
Fits ’00-later Softail models (except FXSTD and
FLSTS models).
51080-02
51081-02
51082-02
51083-02
53160-02
53161-02
53162-02
53192-02
53368-02
E. TWO-UP CUSTOM STITCHED SEAT FOR SOFTAIL MODELS – AXE PATTERN
Axe Pattern.
Rider Pattern.
Scorpion Pattern.
Sweep Pattern.
Axe II Pattern.
Turbulence Pattern.
Menace Pattern.
Scimitar Pattern.
Plain.
$369.00
$369.00
$369.00
$369.00
$369.00
$369.00
$369.00
$369.00
$339.00
F. TWO-UP STITCHED SEAT WITH
CUSTOM PILLION FOR SOFTAIL MODELS*
NEW
Combine the long and lean styling of our low-profile
exotic seat with the back support of the two-up seat,
and you get the best of both worlds. These cowhide
saddles feature custom stitched surfaces and a sleek
tapered pillion for style, and a rider position designed
for comfort. Or go with a smooth cover for that simple
custom look. Seat width: 13". Pillion width: 5".
Softail
Fits ’00-later Softail models (except FXSTD and FLSTS).
51285-02
51286-02
51287-02
51288-02
52013-02
53390-02
53401-02
53402-02
53403-02
Axe Pattern.
Rider Pattern.
Scorpion Pattern.
Sweep Pattern.
Axe II Pattern.
Turbulence Pattern.
Menace Pattern.
Scimitar Pattern.
Plain.
$369.00
$369.00
$369.00
$369.00
$369.00
$369.00
$369.00
$369.00
$339.00
*NOTE: Two-up seats and seats with passenger
pillions require the use of a grab strap. See your
Harley-Davidson dealer for correct grab strap part
number if not included in seat kit.
NOTE: These seats are “made to order” please allow
1 – 2 weeks for delivery.
F. TWO-UP STITCHED SEAT WITH CUSTOM PILLION FOR SOFTAIL MODELS – SWEEP PATTERN
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 236
Price Non-Price Common
236
Softail
Custom Seats
A. SOFTAIL LEATHER
BADLANDER SEATS*
It’s the traditional Badlander seat style enhanced with
supple top-grain leather. Includes leather care product, seat, grab strap and mounting hardware. Seat
width 12.0"; Passenger Pillion width 6.5".
52361-00
52361-97
Fits all ’00-later Softail
models (except FLSTS
and FXSTD). (shown)
Fits all ’84-’99 Softail models
(except FLSTS). (inset)
$239.95
$234.95
NOTE: These Harley-Davidson seats are made of
leather. Fine leathers or other natural materials WILL
gain “character,” such as wrinkles or wear, with age.
This is normal. A fine, aged patina and character wrinkles are a sign of the extremely high quality materials
used to construct your seat or backrest. The appearance of scars or marks on the leather are a result of
using natural leather panels and should not be
thought of as an imperfection. Please use HarleyDavidson Leather Dressing P/N 98261-91V to protect
your investment.
A. SOFTAIL LEATHER BADLANDER SEAT
B. SOFTAIL BADLANDER SEAT*
Clean smooth covers, subtle top-stitching, and two
embroidered “Harley-Davidson” logos add up to a
statement only Harley could create. The low, lean look
also offers the benefit of a reduced seat height, ideal
for riders wanting the lowest possible seat height.
Includes a passenger grab strap, integrated chrome
rear mounting bracket, seat mounting screw, and
installation instructions. Seat width 11.5"; passenger
pillion width 5.5".
52292-00
52292-94B
Fits all ’00-later Softail
models (except FLSTS
and FXSTD).(shown)
Fits all ’84-’99 Softail
models (except FLSTS).
$199.95
$199.95
C. SOFTAIL CUSTOM SEAT*
WITH SNAKESKIN PRINT
Sleek and low style. The Bar & Shield logo adds the
finishing touch! Seat width 11.5", passenger pillion
width 5.0".
51910-00
Fits all ’00-later
Softail models (except
FLSTS and FXSTD).
$229.95
B. SOFTAIL BADLANDER SEAT
*NOTE: Two-up seats and seats with passenger
pillions require the use of a grab strap. See your
Harley-Davidson dealer for correct grab strap
part number if not included in seat kit.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
C. SOFTAIL CUSTOM SEAT WITH SNAKESKIN PRINT
14287
VSA Partners
Harley-Davidson
Page 237
Price Non-Price Common
237
Softail
Leather Seats
D. LEATHER BADLANDER SEAT*
FOR SOFTAIL DEUCE
Accentuate the sleek lines of your Softail Deuce with
the low look of the Badlander Seat. Enhanced with
supple top grain leather and a new embroidered Bar &
Shield logo, this complete package includes leather
care product, seat, and grab strap. Seat width 12.0";
Passenger Pillion width 6.5".
51548-01
Fits ’00-later FXSTD models.
$269.95
E. BADLANDER SEAT FOR SOFTAIL DEUCE*
The Badlander has built its reputation as a true street
custom and now it’s available for the Deuce. Clean
smooth covers, subtle top-stitching, and two embroidered “Harley-Davidson” logos add up to a statement
only Harley-Davidson could create. The low, lean look
also offers the benefit of a reduced seat height, ideal
for riders wanting the lowest possible ride. Includes all
necessary mounting hardware. Seat width is 12.0";
passenger pillion width is 6.5".
52461-00
Fits ’00-later FXSTD models.
$199.95
D. LEATHER BADLANDER SEAT FOR SOFTAIL DEUCE
F. SNAKESKIN SEAT*
FOR SOFTAIL DEUCE MODELS
As if the sleek and low style of this seat didn’t
get you close enough to the ground, the simulated
snakeskin print lets you slither down the street with
even more custom style. Designed for the Deuce, the
seat includes all necessary mounting hardware. Seat
width is 12.0"; passenger pillion width is 7.0".
52463-00
Fits ’00-later FXSTD models.
$229.95
E. BADLANDER SEAT FOR SOFTAIL DEUCE
*NOTE: Two-up seats and seats with passenger
pillions require the use of a grab strap. See your
Harley-Davidson dealer for correct grab strap
part number if not included in seat kit.
F. SNAKESKIN SEAT FOR SOFTAIL DEUCE MODELS
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 238
Price Non-Price Common
238
Softail
Seats with Backrests
SOFTAIL SEATS WITH RIDER BACKRESTS
These seats are the most adjustable of their kind
on the market. A patented design, integrated fuel
spring makes the backrest angle infinitely
adjustable through a 30-degree range with the
touch of a concealed, integrated, yet easy-toreach lever. The backrest removes easily and has
a push-button-activated, five-position, 1.5" height
adjustment. Rider Backrest folds down to allow
easier passenger mounting. These seats are
designed to match the styling of either the Heritage
Softail Classic, Fat Boy, Heritage Springer or FX
Softail, and include seat, rider backrest, passenger
grab strap and mounting hardware.
A. HERITAGE SOFTAIL CLASSIC SEAT*
WITH RIDER BACKRESTS
These seats add miles to the ride with added back
support and foam density. Includes chrome spots and
a new concho to match your Heritage Softail Classic
bags. Seat width 15.0", passenger pillion width 11.5".
51562-00
Fits all ’00-later Softail models
(except FLSTS and FXSTD).
(Does not fit with Luggage Rack
P/Ns 53465-87B or 53831-00). $559.95
Shown with:
HERITAGE SOFTAIL CLASSIC
BUCKET PASSENGER BACKREST PAD
The bucket backrest pad is taller and wider than the
stock pad. The foam contours to the lower back to
provide added comfort for those long rides. Features
chrome spots and includes all mounting hardware.
52348-97
Fits FLSTC and FXSTC models with
stock Sissy Bar upright and all
other Softail models equipped
with Low Sissy Bar Upright.
$95.95
A. HERITAGE SOFTAIL CLASSIC SEAT WITH RIDER BACKREST
B. FAT BOY SEAT*
WITH RIDER BACKREST
These seats add miles to the ride with added back
support and foam density. Fat Boy logo adds the finishing touch! Seat width 15.0", passenger pillion width
11.5".
51560-00
Fits all ’00-later Softail models
(except FLSTS and FXSTD models).
(Does not fit with Luggage Rack P/Ns
53465-87B or 53831-00.) Matches
Backrest Pad P/N 52347-97
$559.95
Shown with:
FAT BOY BUCKET BACKREST PAD
This bucket backrest pad is taller and wider; the
foam contours to the back for added comfort on
those long hauls.
52347-97
Fits FLSTF models with separate
purchase of Low Sissy Bar Upright.
Also fits FLSTC and FXSTC models
with stock Sissy Bar Uprights.
$95.95
Press push-button in the centre of backrest
pad to adjust vertically to five different heights.
BACKREST
HEIGHT
BACKREST
ANGLE
Pull tab on side of seat to adjust angle of backrest
pad 30˚ forward or backward.
*NOTE: Two-up seats and seats with passenger
pillions require the use of a grab strap. See your
Harley-Davidson dealer for correct grab strap part
number if not included in seat kit.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. FAT BOY SEAT WITH RIDER BACKREST
14287
VSA Partners
Harley-Davidson
Page 239
Price Non-Price Common
239
Softail
Seats with Backrests
C. HERITAGE SPRINGER
SEAT* WITH RIDER BACKREST
These seats add miles to the ride with added back
support and foam density. Seat width 15.0", passenger
pillion width 11.5".
51564-00
With Black Trim.
Fits all ’00-later Softail models
(except FXSTD models). (Does
not fit with Luggage Rack
P/Ns 53465-87B or 53831-00). $629.95
Shown with:
HERITAGE SPRINGER BUCKET
PASSENGER BACKREST PAD
Features large bucket shape, with a generous radius
and ample padding. This backrest pad offers extra
comfort for your passenger.
51132-98
Fits Softail models (except
FXSTD) equipped with Low
Sissy Bar Upright.
$79.95
D. FX SOFTAIL SEAT*
WITH RIDER BACKREST
These seats with embroidered logo add miles to the ride
with added back support and foam density. Seat width
15.0", passenger pillion width 11.5".
51566-00
Fits all ’00-later Softail models
(except FLSTS and FXSTD).
(Does not fit with Luggage Rack
P/Ns 53465-87B or 53831-00).
Matches Backrest Pad P/N
51132-98
$559.95
Shown with:
HERITAGE SPRINGER BUCKET
PASSENGER BACKREST PAD
C. HERITAGE SPRINGER SEAT WITH RIDER BACKREST
Features large bucket shape, with a generous radius
and ample padding. This backrest pad offers extra
comfort for your passenger.
51132-98
Fits Softail models (except
FXSTD) equipped with Low
Sissy Bar Upright.
$79.95
Also available:
FX SOFTAIL BUCKET BACKREST PAD
This backrest features a contoured back support area
for greater passenger comfort.
51130-98
Fits all low and tall medallion
Sissy Bar uprights. (Does not
fit Mini Sissy Bar Upright.)
$79.95
*NOTE: Two-up seats and seats with passenger
pillions require the use of a grab strap. See your
Harley-Davidson dealer for correct grab strap
part number if not included in seat kit.
D. FX SOFTAIL SEAT WITH RIDER BACKREST
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 240
Price Non-Price Common
240
Softail
Sundowner Bucket Seats
SOFTAIL SUNDOWNER DEEP BUCKET SEAT
The ultimate combination of style and comfort,
these wide double bucket seats are designed to
cradle you and your passenger. Carefully shaped
for maximum lower back support, the rider seating area has a recessed surface for extra comfort
on long rides. The entire seat is constructed with
high density foam, for long-term shape retention,
and specially designed surface materials that are
tested to withstand rider abrasion and harsh
weather. The seat pan and hardware are made
from the same high quality components as HarleyDavidson stock seats, ensuring perfect fitment
and durability. Designed to match the styling of
either the Heritage Softail Classic, Fat Boy,
Heritage Springer or FX Softail.
A. HERITAGE SOFTAIL CLASSIC
SUNDOWNER DEEP BUCKET SEAT*
This seat has double buckets for you and your passenger. Seat includes chrome spots to match your
Heritage Softail Classic. Seat width 15.0", passenger
pillion width 12.0".
51572-00
Fits all ’00-later Softail models
(except FLSTS and FXSTD). (Does
not fit with Luggage Rack P/Ns
53465-87B or 53831-00.)
$259.95
Also available:
HERITAGE SOFTAIL CLASSIC
BUCKET PASSENGER BACKREST PAD
The bucket backrest pad is taller and wider than the
stock pad. The foam contours to the lower back to
provide added comfort for those long rides. Features
chrome spots and includes all mounting hardware.
52348-97
Fits FLSTC and FXSTC models
with stock Sissy Bar upright and
all other Softail models equipped
with Low Sissy Bar Upright.
$95.95
A. HERITAGE SOFTAIL CLASSIC SUNDOWNER DEEP BUCKET SEAT
B. FAT BOY SUNDOWNER
DEEP BUCKET SEAT*
This seat has double buckets for you and your passenger. Seat includes an embroidered logo to match
your Fat Boy. Seat width 15.0", passenger pillion
width 12.0".
51570-00
Fits all ’00-later Softail models
(except FLSTS and FXSTD).
(Does not fit with Luggage Rack
P/Ns 53465-87B or 53831-00.) $264.95
Shown with:
HERITAGE SPRINGER BUCKET
PASSENGER BACKREST PAD
Features large bucket shape, with a generous radius
and ample padding. This backrest pad offers extra
comfort for your passenger.
51132-98
Fits Softail models (except
FXSTD) equipped with Low
Sissy Bar Upright.
$79.95
*NOTE: Two-up seats and seats with passenger
pillions require the use of a grab strap. See your
Harley-Davidson dealer for correct grab strap
part number if not included in seat kit.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. FAT BOY SUNDOWNER DEEP BUCKET SEAT
14287
VSA Partners
Harley-Davidson
Page 241
Price Non-Price Common
241
Softail
Sundowner Bucket Seats
C. HERITAGE SPRINGER SUNDOWNER DEEP
BUCKET SEAT
This seat has double buckets for you and your
passenger. Seat includes matching concho and valance
with fringe to complement the look of your FLSTS.
51574-00
With Black Trim.
Fits ’00-later FLSTS models.
(Does not fit with FXSTD.) (Does
not fit with Luggage Rack
P/Ns 53465-87B or 53831-00.)
Seat width 15.0", passenger
pillion width 12.0".
$349.95
Shown with:
HERITAGE SPRINGER BUCKET
PASSENGER BACKREST PAD
Features large bucket shape, with a generous radius
and ample padding. This backrest pad offers extra
comfort for your passenger.
51132-98
Fits Softail models (except
FXSTD) equipped with
Low Sissy Bar Upright
P/N 52735-85 or 53004-98.
$79.95
D. FX SOFTAIL SUNDOWNER
DEEP BUCKET SEAT*
This FX style bucket seat offers you and your passenger Softail style and added comfort for longer rides.
51576-00
Fits all ’00-later Softail models
(except FLSTS and FXSTD).
Seat width 15.0", passenger
pillion width 12.0".
$239.95
Shown with:
FX SOFTAIL BUCKET BACKREST PAD
This backrest features a contoured back support area
for greater passenger comfort.
C. HERITAGE SPRINGER SUNDOWNER DEEP BUCKET SEAT
51130-98
Fits all low and tall medallion
Sissy Bar uprights. (Does not fit
Mini Sissy Bar Upright.)
$79.95
*NOTE: Two-up seats and seats with passenger
pillions require the use of a grab strap. See your
Harley-Davidson dealer for correct grab strap
part number if not included in seat kit.
D. FX SOFTAIL SUNDOWNER DEEP BUCKET SEAT
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 242
Price Non-Price Common
242
Softail
Two-Up Seats
A. SUNDOWNER TOURING SEAT*
FOR SOFTAIL DEUCE MODELS
When you’ve got the style of a Softail Deuce, you want
to take on the road as much as possible. This
Sundowner seat gives you added touring comfort
without sacrificing the Deuce style that has heads
turning. A wide and deep rider bucket allows for lower
back support and comfort for the long haul and the wide
passenger pillion allows your passenger to be comfortable as well. Styled to match your Deuce with an
embroidered “H-D” logo. Includes all necessary mounting hardware. Seat width is 14.0"; passenger pillion
width is 11.0". Combine with the Touring Passenger
Backrest Pad for Softail Deuce P/N 52050-00 for additional passenger comfort.
51112-00A
Fits ’00-later FXSTD models.
$259.95
Shown with:
TOURING PASSENGER BACKREST
PAD FOR SOFTAIL DEUCE MODELS
Together with the Touring Seat for Softail Deuce P/N
51112-00, this backrest passenger pad provides
additional support for the long haul with a wide radius
backrest.
52050-00
Fits ’00-later FXSTD models
equipped with Passenger Sissy
Bar Upright P/N 51114-00.
A. SUNDOWNER TOURING SEAT FOR SOFTAIL DEUCE MODELS
$64.95
B. SOFTAIL TWO-UP CUSTOM SEAT*
WITH SNAKESKIN PRINT
The edgy, custom snakeskin print fits your style, the
contoured shape fits you and a passenger. Includes
embroidered “H-D” Flying Wheel logo. Seat width
14.0", pillion width 6.5".
52850-00
Fits all ’00-later
Softail models (except
FLSTS and FXSTD).
$239.95
C. SOFTAIL TWO-UP CUSTOM SEAT*
A textured rider area and sculptured shape for added
support set this seat apart from the crowd. Kit
includes passenger grab strap. Recommended passenger backrests are P/N 52517-94 (short rail),
52965-98 (tall) and 52612-95 (low). Seat width 15.0";
Passenger Pillion width 4.5".
52850-97
Fits ’84-’99 Softail
models (except FLSTS).
$239.95
B. SOFTAIL TWO-UP CUSTOM SEAT WITH SNAKESKIN PRINT
*NOTE: Two-up seats and seats with passenger
pillions require the use of a grab strap. See your
Harley-Davidson dealer for correct grab strap
part number if not included in seat kit.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
C. SOFTAIL TWO-UP CUSTOM SEAT
14287
VSA Partners
Harley-Davidson
Page 243
Price Non-Price Common
243
Softail
Custom Seats
D. SOFTAIL SOLO SEAT
WITH REMOVABLE PILLION*
This seat provides a wider seating area, a clean look
and Softail style at a great price. Remove the passenger pillion for a stripped-down solo look. Seat width
15.0". Pillion width 11.5".
51578-00
Fits all ’00-later
Softail models (except
FLSTS and FXSTD).
$229.95
E. CUSTOM SEAT FOR
NIGHT TRAIN MODELS
Get additional two-up comfort and distinctive Night
Train styling with this seat, featuring dark-as-night textured leather inserts branded with the Night Train logo
and unmistakable Harley quality. Seat width 15.5";
passenger pillion width 8.0".
51536-00
Fits ’00-later Softail models
(except FXSTD and FLSTS).
$249.95
F. SOFTAIL SOLO SEAT WITH
CHROME-STUDDED LEATHER VALANCE
D. SOFTAIL SOLO SEAT WITH REMOVABLE PILLION
Nothing brings out the nostalgic look of Softail models more than a few well-placed chrome studs. This
collection gives you the flexibility to cruise on a solo
saddle or complete the look with the full collection.
Styled to match your stock FLSTC models with
Chrome Spots, Leather Valance and Piping.
1. Solo Saddle*
52236-86E Fits all ’84-’99 Softail
models (except FLSTS).
Seat width 12.0".
$189.95
2. Low-Profile Passenger Pillion*
52533-93A Fits ’00-later FL Softail models
(except FLSTS) with stock seats.
Also fits ’84-’99 Softail models.
Grab strap included. Passenger
Pillion width 7.0".
$93.95
3. Passenger Pillion*
52208-96A Fits ’00-later FL Softail models
(except FLSTS) with stock seats.
Also fits ’84-’99 Softail models.
Includes grab strap. Passenger
Pillion width 12.5".
$104.95
4. Heritage Softail Classic Bucket
Passenger Backrest Pad
52348-97
Fits FLSTC and FXSTC
models with stock upright and
all other Softail models equipped
with Low Sissy Bar Upright.
$95.95
5. Studded Backrest Pad
52556-93
Fits FLSTC and FXSTC models
E. CUSTOM SEAT FOR NIGHT TRAIN MODELS
with stock Sissy Bar upright and all
other models with Sissy Bar Upright
P/N 52735-85. Styled to match
stock FLSTC models.
$64.95
2
6. Studded Short Rail Backrest Pad
52516-94
Fits Short Rail Sissy Bar Uprights.
4
Requires H-D Short Rail Upright
P/N 52737-94A for installation. $57.95
5
3
6
1
1
*NOTE: Two-up seats and seats with passenger
pillions require the use of a grab strap. See your
Harley-Davidson dealer for correct grab strap
part number if not included in seat kit.
F. CHROME-STUDDED SEAT COLLECTION
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 244
Price Non-Price Common
244
Softail
Diamond Back Seats, Solo Saddles
1
A. DIAMOND BACK SOFTAIL SEAT*
This Softail Diamond Back Seat fits with the same
great Diamond Back seat styling. Fits with current
Softail Diamond Back Tail Sections and Diamond
Back Pillion P/N 52069-98 (sold separately). Seat
width 13.8".
52629-00
Fits all ’00-later Softail models
(except FLSTS and FXSTD).
$129.95
2
Shown with:
DIAMOND BACK PILLION*
Adds two-up capability to Diamond Back Seat. This
custom-look pillion complements the seats in our
Diamond Back Collection and is interchangeable with
Diamond Back Tail Sections. Kit includes pillion and
passenger grab strap. Pillion width 5.0".
52069-98
Fits ’83-later XL models and
’84-later Softail models equipped
with Diamond Back seats (except
FLSTS and FXSTD). (Does not
work with Detachable
Pillion Hardware Kits.)
$74.95
A. DIAMOND BACK SOFTAIL SEAT SHOWN WITH DIAMOND BACK PILLION
Inset photo:
DIAMOND BACK CHROME TAIL SECTIONS
A hand-polished chrome-plated steel insert, fitted to a
vinyl covered moulded base, provides long-lasting
good looks. Includes mounting hardware for quick,
easy installation. Can only be installed with appropriate Diamond Back Seat.
Fits ’82-later XL, ’93-later FXDWG, ’82-’94 FXR, ’99
FXR models, and ’84-later Softail models (except
FLSTS).
1. 52053-96 Diamond Accent.
2. 52620-95 Solid.
B. DELUXE LEATHER SOLO SADDLE
WITH NOSTALGIC SKIRT
52006-47B Requires Solo Seat Bracket/
Spring Kit P/N 52225-89.
$79.95
$79.95
$199.95
C. STANDARD LEATHER SOLO SADDLE*
First offered in 1925, a timeless design and a comfortable seat.
52004-25
Requires Solo Seat Bracket/
Spring Kit P/N 52225-89.
$166.95
Solo Seat Bracket/Spring Kit (not shown)
Allows you to upgrade your Softail to the nostalgic
look of a leather solo saddle. Complete kit includes
front and rear mounting brackets, chrome-plated
springs, all necessary hardware, and a frame/battery
cover for a clean installation. This kit is required to
install Deluxe Leather Solo Saddle P/N 52006-47B or
Leather Solo Saddle P/N 52004-25.
52225-89
Fits all ’86-’94 Softail models.
B. DELUXE LEATHER SOLO SADDLE
WITH NOSTALGIC SKIRT
C. STANDARD LEATHER SOLO SADDLE
$79.95
D. PILLOW-LOOK SEAT* AND
MATCHING BACKREST PADS
Soft, plush pillow-look seat adds a measure of comfort and style. Includes embossed “Softail” logos and
passenger grab strap.
91768-96
Fits all ’84-’99 Softail
models (except FLSTS).
$189.95
Pillow-Look Tall Backrest Pad
91770-85
Requires Insert-Style or
Medallion Plate-Style Tall Sissy
Bar Upright for installation.
$75.95
Pillow-Look Low Backrest Pad
52545-84
Requires Low Plate-Style Sissy
Bar Upright for installation.
$57.95
*NOTE: Two-up seats and seats with passenger
pillions require the use of a grab strap. See your
Harley-Davidson dealer for the correct grab strap
part number if not included in the seat kit.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
D. PILLOW-LOOK SEAT AND MATCHING BACKREST PADS
14287
VSA Partners
Harley-Davidson
Page 245
Price Non-Price Common
245
Softail
Pillions and Detachable Hardware
E. TOURING PASSENGER PILLION*
FOR HERITAGE SOFTAIL CLASSIC MODELS
More long-haul comfort. Wider than the 12.5" stock
version, this passenger pillion was designed to match
the stock rider seat on the FLSTC, and features the
signature chrome spots. Pillion width: 14".
52912-00
Fits ’84-later Softail models
(except FXSTD/I and FLSTS/I). $149.95
F. FAT BOY COLLECTION
1. Fat Boy Short Rail Upright Backrest Pad
Requires separate purchase of P/N 52737-94A for
installation.
52514-94
Stock
Touring Pillion
$57.95
2. Low-Profile Passenger Pillion*
52534-93A Fits ’00-later FL Softail models
(except FLSTS) with stock seats.
Also fits ’84-’99 Softail models.
(Does not include grab strap.)
$93.95
E. TOURING PASSENGER PILLION FOR HERITAGE SOFTAIL CLASSIC MODELS
G. DETACHABLE SEAT HARDWARE KIT
These hardware kits allow the rider to remove onepiece Harley-Davidson seats quickly and easily.
51676-97
Fits ’97-later XL, Dyna, FLHRC and
FLTR models, and ’97-’99 FXST, and FXSTS, models
with two-up, one-piece seats. (Does not fit FLSTS or
Softail Bucket Seats.) (Does not fit FXSTD.)
$15.95
Fits ’96 XL, FXST, FXSTS
51676-96
and Dyna models with two-up, one-piece seats.
(Does not fit Softail Bucket Seats.)
$19.95
Fits ’82-’95 XL, ’84-’95
51675-96
FXSTC, FXSTS, ’91-’95 FXD and ’82-’94 FXR
models with two-up, one-piece seats.
(Does not fit Softail Bucket Seats.)
$19.95
1
NOTE: These kits do not work with Softail Seats with
Rider Backrests.
H. DETACHABLE PILLION PAD
HARDWARE KIT
Convert from two-up riding to solo riding in a matter
of seconds using a hardware kit that bolts on to
Harley-Davidson Original Equipment or accessory pillion pad. Chrome-plated attachment hardware and
bracket offer improved fender-to-bracket isolation.
Easy to install, the kit comes complete with all
required fasteners and installation instructions. Patent
applied for.
2
52705-97
51658-97
F. FAT BOY COLLECTION
51657-96
Fits ’97-later FLSTS
models with pillion pads.
Fits ’97-later Softail
models with two-piece seats.
(Does not fit FLSTS.)
Fits ’84-’95 Softail models
with pillion pads.
$23.95
$35.95
$35.95
*NOTE: Two-up seats and seats with passenger
pillions require the use of a grab strap. See your
Harley-Davidson dealer for the correct grab strap
part number if not included in the seat kit.
G. DETACHABLE SEAT HARDWARE KIT
H. DETACHABLE PILLION PAD HARDWARE KIT
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 246
Price Non-Price Common
246
NEW
Softail
Backrest Pads
A. SHORT BACKREST PAD
FOR SOFTAIL DEUCE
Styled to complement the Softail Deuce Badlander
and Snakeskin seats.
51534-00
Fits ’00-later FXSTD models
equipped with Passenger Sissy
Bar Upright P/N 51114-00.
$49.95
B. TALL BACKREST PAD
FOR SOFTAIL DEUCE
This taller backrest pad is designed to give the passenger more back support for the long haul. Works
with the Tall Upright P/N 51144-02.
51099-02
Fits ’00-later FXSTD models
equipped with Deuce Tall
Upright P/N 51144-02.
$49.00
C. SOFTAIL DEUCE
PASSENGER BACKREST PAD
Passenger backrest pad styled to match Passenger
Upright P/N 51114-00.
52549-00
Fits ’00-later FXSTD.
$49.95
A. SHORT BACKREST PAD FOR
SOFTAIL DEUCE
B. TALL BACKREST PAD FOR
SOFTAIL DEUCE
C. SOFTAIL DEUCE PASSENGER BACKREST PAD
D. TOURING PASSENGER BACKREST
PAD FOR SOFTAIL DEUCE
E. MINI RAIL BACKREST PAD
F. HERITAGE SPRINGER BUCKET
PASSENGER BACKREST PAD
D. TOURING PASSENGER BACKREST
PAD FOR SOFTAIL DEUCE
Together with the Touring Seat for Softail Deuce
P/N 51112-00, this backrest passenger pad provides
additional support for the long haul with a wide
radius backrest.
52050-00
Fits ’00-later FXSTD models
equipped with Passenger Sissy
Bar Upright P/N 51114-00.
$64.95
E. MINI RAIL BACKREST PAD
Innovative Mounting System features a brushed
stainless steel insert framed with chrome plate and
hardware.
52513-94
Fits XL, FXR, FXD, and Softail
models (except FXSTD) equipped
with Badlander Custom Seats, select Exotic
Collection Seats and appropriate Mini Rail Sissy Bar Upright. $50.95
F. HERITAGE SPRINGER BUCKET
PASSENGER BACKREST PAD
Features large bucket shape, with a generous radius
and ample padding. This backrest pad offers extra
comfort for your passenger.
51132-98
Fits Softail models (except
FXSTD) equipped with Low
Sissy Bar Upright.
$79.95
*NOTE: Two-up seats and seats with passenger
pillions require the use of a grab strap. See your
Harley-Davidson dealer for correct grab strap
part number if not included in seat kit.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 247
Price Non-Price Common
247
Softail
Backrest Pads
G. SHORT RAIL BACKREST PADS
1
3
2
4
Innovative Backrest Pad Mounting System features a
brushed stainless steel insert framed with chrome
plate and hardware.
Fits Short Rail Sissy Bar Uprights.
1.
2.
3.
4.
52514-94
52516-94
52517-94
52518-94
Fat Boy.
$57.95
Short Rail Backrest Pad-Studded. $57.95
Smooth.
$52.95
Pillow-Look.
$52.95
H. FX SOFTAIL PASSENGER
BACKREST PADS
FX Softail Low Passenger Backrest Pad
1. 52087-98 Fits Softail models
(except FXSTD) equipped
with Low Sissy Bar Upright.
$59.95
FX Softail Short Rail Passenger Backrest Pad
2. 52085-98 Fits Softail models
G. SHORT RAIL BACKREST PAD
equipped with Short Rail
Sissy Bar Upright.
G. SHORT RAIL BACKREST PADS
$54.95
I. FAT BOY BUCKET BACKREST PAD
This bucket backrest pad is taller and wider; the foam
contours to the back for added comfort on those long
hauls.
52347-97
1
Fits FLSTF models with separate
purchase of Low Sissy Bar
Upright P/N 52735-85. Also fits
FLSTC and FXSTC models with
stock Sissy Bar Uprights.
$95.95
J. BUCKET BACKREST PAD
The bucket backrest pad is taller and wider; the foam
contours to the lower back to provide added comfort
for those long rides. Features a smooth cover and Bar
& Shield logo. Includes all mounting hardware.
2
52350-97
Fits FLSTC and FXSTC
models with stock Sissy Bar
Upright and all other Softail models
(except FXSTD) fitted with
Sissy Bar Upright.
$84.95
H. FX SOFTAIL SHORT RAIL PASSENGER BACKREST PAD AND LOW PASSENGER BACKREST PAD
I. FAT BOY BUCKET BACKREST PAD
J. BUCKET BACKREST PAD
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 248
Price Non-Price Common
248
Softail
Backrest Pads
A. PLAIN BACKREST PAD WITH CONCHO
52615-97
Fits ’97-later FLSTS models.
Requires separate purchase of
Low Sissy Bar Upright.
$69.95
B. FAT BOY LOW BACKREST PAD
Includes mounting bracket, hardware and installation
instructions. Requires separate purchase of Low Sissy
Bar Upright P/N 52735-85.
52532-90
Fits ’84-later Softail
models (except FXSTD).
$72.95
C. TOP-STITCHED LOW BACKREST PADS
Matches models with top-stitched seats. Also matches ’99 FXR model stock seat.
Fits with H-D Low Plate-Style Sissy Bar Upright.
1. 52612-95
2. 52614-95
Smooth.
Pillow-Look.
$57.95
$57.95
D. LOW BACKREST PADS
Includes all necessary mounting hardware/brackets to
fit Low Plate-Style Sissy Bar Upright.
A. PLAIN BACKREST PAD WITH CONCHO
1. 52412-79A With Embossed Bar & Shield. $51.95
2. 52495-88 Smooth.
Matches FXST, FXSTS,
FXRS-SP, XL (std.), and FXD
(Super Glide) stock
production seats.
$51.95
3. 52545-84 Pillow-Look.
Requires Low Plate-Style
Sissy Bar Upright P/N 52735-85
for installation.
$57.95
B. FAT BOY LOW BACKREST PAD
2
2
3
E. TALL SISSY BAR BACKREST PADS
Quality backrest pads include chrome-plated mounting brackets and hardware.
Smooth, Top-Stitched
1. 52965-98 Matches Smooth, Top-Stitched
1
H-D stock and accessory
seats. Requires Insert-Style
or Medallion Plate-Style Tall Sissy
Bar Upright for installation.
$75.95
1
Pillow-Look Tall
2. 91770-85 Requires Insert-Style or
Medallion Plate-Style Tall Sissy
Bar Upright for installation.
$75.95
F. SISSY BAR UPRIGHT
SLIP-OVER BACKREST PADS
Slip-on for passenger comfort. Easily removed to
show off chrome Sissy Bar uprights.
1. 52563-82
2. 91819-85
D. LOW BACKREST PADS
C. TOP-STITCHED LOW BACKREST PADS
Fits all Tall Sissy Bar Uprights. $39.95
Fits all Low Sissy Bar Uprights. $34.95
2
1
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
E. TALL BACKREST PADS
2
1
F. SISSY BAR SLIP-OVER BACKREST PADS
14287
VSA Partners
Harley-Davidson
Page 249
Price Non-Price Common
249
NEW
Softail
Tail Sections and Backrests
G. COLOUR-MATCHED TAIL SECTION
FOR SOFTAIL DEUCE MODELS*
Add a splash of colour behind your Deuce model’s
Solo Seat while hiding the rear fender’s Sissy Bar
Upright mounting holes with these exclusive colourmatched Tail Sections.
Fits ’00-later FXSTD models equipped with any GMA
Solo Seat for FXSTD models.
51110-00BDK
51110-00DH
51110-00ZQ
51110-00NV
51110-00NR
51110-00ZL
51110-00QH
51110-00XG
51110-01XE
51110-00ZB
G. COLOUR-MATCHED TAIL SECTION FOR SOFTAIL DEUCE MODELS
Primed.
Vivid Black.
Luxury Rich Red.
Aztec Orange Pearl.
Sinister Blue Pearl.
Diamond Ice.
Concord Purple.
Real Teal.
Luxury Blue.
White Pearl.
$79.95
$109.95
$109.95
$109.95
$109.95
$109.95
$109.95
$109.95
$109.95
$109.95
H. HERITAGE SPRINGER BACKREST PADS
Attaches to FLSTS Heritage Springer passenger grab
rail, with more height for added support. Includes
chrome-plated hardware and bracketry, and passenger grab strap kit.
Rider Backrest Pad, Tall
52827-97
Fits ’97-later FLSTS
Heritage Springer models.
$114.95
Passenger Backrest Pad, Tall
Tall backrest offers extra comfort.
52829-97
Fits ’97-later Heritage
Springer models equipped
with Detachable Passenger
Handrail P/N 53736-97.
(Cannot be used with or on
the front handrail.)
$114.95
I. HERITAGE SPRINGER
RIDER BACKREST PAD – LOW
Attaches easily to FLSTS Heritage Springer passenger
grab rail to provide a little support and a lot of style.
Includes chrome-plated hardware and passenger
grab strap kit.
52826-97
Fits ’97-later FLSTS
Heritage Springer models.
$89.95
J. HERITAGE SPRINGER
DETACHABLE PASSENGER HANDRAIL
Brilliant chrome-plating.
53736-97
H. HERITAGE SPRINGER BACKREST PADS – TALL
Fits ’97-later FLSTS. See
“Detachable Docking
Hardware Matrix” or Instruction
Sheet for required docking
hardware. (Will not work with
Chrome 3-Channel Luggage
Rack P/N 53465-87B.)
$185.00
*NOTE: This product is a “paint to order” accessory.
Please allow an average of 5 weeks delivery for
this item.
I. HERITAGE SPRINGER RIDER
BACKREST PAD – LOW
J. HERITAGE SPRINGER DETACHABLE
PASSENGER HANDRAIL
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 250
Price Non-Price Common
250
Softail
Sideplates
A. GENUINE HARLEY-DAVIDSON
SIDEPLATE KITS
Manufactured to rigid specifications by American craftsmen and designed to accept our current line of Sissy
Bar Uprights.
Rigid-Mount Sideplates – Chrome
53378-03
Fits ’00-later FXSTS, FXST,
53374-03
52786-84B
52791-86A
FXSTB and FLSTF models.
’00-’02 models require
separate purchase of Hardware
Kit P/N 53388-03.
$74.95
Fits ’00-later FLSTC and FLSTS
models. ’00-’02 models require
separate purchase of Hardware
Kit P/N 53388-03.
$74.95
Fits ’97-’99 FLSTS and all ’84-’99
FXSTC, and FXSTS models.
$69.95
Fits all ’86-’99 FLSTC, FLSTF,
FLSTN models (except FLSTS). $74.95
Rigid Mount – Chrome
Rigid-Mount Sideplates – Wrinkle Black
53387-03
Fits ’00-later FXSTS, FXST, FXSTB
53004-98
and FLSTF models. ’00-’02 models
require separate purchase of
Hardware Kit P/N 53388-03.
$54.95
Fits ’98-’99 FXSTB; ’97-’99
FLSTS; ’84-’99 FXSTC and FXSTS
models. (Does not fit FXSTD.)
$54.95
Rigid Mount – Chrome
Rigid Sideplate Hardware Kit
53388-03
Hardware kit is required to
install Rigid Sideplates P/N
53378-03, 53374-03 and
53387-03 on ’00-’02 models
$4.95
Detachable Sideplates – Chrome
Quick Detachable Sissy Bar Sideplates are custom
designed to transform your bike from a Sissy Barmounted, two-up highway cruiser to a boulevard custom at the snap of a rotary latch. These sideplates
incorporate a spring-loaded cam hardware. Sissy Bar
Uprights sold separately. Patented.
53810-00
53815-00
53549-95
Fits ’00-later FLSTF, FXST, FXSTS
or FXSTB models with or without
saddlebags. (Does not fit FXSTD.)
Requires separate purchase of
Docking Hardware Kit and may
require Directional Relocation Kit.
See chart for your application $129.95
Fits ’00-later FLSTC and
FLSTS models (except FXSTD).
Requires separate purchase of
Docking Hardware Kit and may
require Directional Relocation Kit.
See chart for your application $129.95
Fits ’84-’99 Softail models (except
FLSTS).Requires separate purchase
of Docking Hardware Kit and may
require Directional Relocation Kit.
See chart for your application $129.95
Detachable – Chrome
Detachable Sideplates – Wrinkle Black
53857-00A Fits ’00-later FLSTF, FXST, FXSTS
and FXSTB models with and without
saddlebags. (Does not fit FXSTD models.) Requires separate purchase of
Docking Hardware Kit and may
require Directional Relocation Kit.
See chart for your application
$94.95
Detachable – Wrinkle Black
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
A. GENUINE HARLEY-DAVIDSON SIDEPLATE KITS
14287
VSA Partners
Harley-Davidson
Page 251
Price Non-Price Common
251
Softail
Docking Hardware
1984 – 1999 SOFTAIL DOCKING HARDWARE FOR DETACHABLE RACKS, HANDRAILS & SIDEPLATES
Docking hardware fitment is dependent on vehicle model and saddlebag configuration.
DETACHABLE ACCESSORY
MODEL FITMENT
DETACHABLE
SIDEPLATE
DOCKING HARDWARE
DIRECTIONAL RELOCATION KIT
Detachable Sideplates; 53459-95 and Saddlebags:
Heritage Style, 90835-90; Leather Saddlebags,
91555-01A, 53061-00A
1984-1999 FLSTC
53549-95
53371-95A
$31.95
Not Required
Detachable Sideplates; 53549-95 and Saddlebags:
Fat Boy, 90381-98; Leather Saddlebags, 91555-01A,
53061-00
1984-1999 FLSTC
1993-1999 FLSTN
53549-95
53370-95B
$31.95
Not Required
Detachable Sideplates; 53549-95 and Saddlebags:
Fat Boy, 90381-98, 90833-90C
1984-1999 FXSTSB, FXSTS,
FXSTC, FLSTF
53549-95
53370-95B
$31.95
53692-96
Detachable Sideplates; 53549-95 only
1984-1999 FLSTC,
1993-1999 FLSTN
53549-95
53531-95A
$24.95
Not Required
Detachable Sideplates; 53549-95 only
1984-1999 FXSTSB, FXSTS,
FXSTC, FLSTF
53549-95
53531-95A
$24.95
53692-96
Heritage Springer Solo Rack; 53715-97
1997-1999 FLSTS
Not Required
90368-97 &
$38.95
90306-97A Required
Not Required
$25.95
Heritage Springer Detachable Passenger Handrail;
53736-97 (Fits with Detachable Two-Up Rack;
53740-97) (Not compatible with 3-Channel
Luggage Rack; 53465-87B)
1997-1999 FLSTS
Not Required
90368-97
$38.95
Not Required
Heritage Springer Detachable Two-up Rack;
53740-97, (Fits with Detachable Handrail; 53736-97)
(Not compatible with Rigid Sideplate 52786-84B)
1997-1999 FLSTS
Not Required
90368-97 &
$38.95
90306-97A Required
Not Required
$25.95
Detachable Sideplates and Hard Saddlebags 90224-00xx
1987-1999 FLSTC
53549-95
53009-03 &
$9.95
53531-95A Required
Included With Bags
$24.95
Detachable Sideplates and Hard Saddlebags 90225-00xx
1987-1999 FXST, FXSTC,
FXSTS, FXSTB
53549-95
53009-03 &
$9.95
53531-95A Required
Included With Bags
$24.95
Detachable Sideplates and Hard saddlebags 90715-00xx
1990-1999 FLSTF
53549-95
53009-03 &
$9.95
53531-95A Required
Included With Bags
$24.95
$34.95
$34.95
2000 – LATER SOFTAIL DOCKING HARDWARE FOR DETACHABLE RACKS, HANDRAILS, TOUR PAK RACKS & SIDEPLATES
Docking hardware fitment is dependent on vehicle model and saddlebag configuration.
DETACHABLE ACCESSORY
MODEL FITMENT*
DETACHABLE SIDEPLATE
Detach Sideplates: 53810-00 (Chrome),
53857-00A (Black) or Detach Tour Pak Rack 53066-00A
with P&A Bags: 92000-00B, 91536-00A, 90320-00B,
90114-00A, 90130-00B,90119-00A, 91537-00A,
91555-01A, 53061-00, and 92015-03
2000-2001 FLSTF,
FXST/B/S
2002 FLSTF,
FXST/B/S
2003 FLSTF,
FXST/B/S
53810-00 – Chrome
53857-00A – Black
53810-00 – Chrome
53857-00A – Black
53810-00 – Chrome
53857-00A – Black
Detach Sideplates: 53810-00A (Chrome),
53857-00A (Black) or Detach Tour Pak Rack 53066-00A
without P&A Bags:
2000-2001 FLSTF,
FXST/B/S
2002 FLSTF,
FXST/B/S
2003 FLSTF,
FXST/B/S
53810-00 – Chrome
53857-00A – Black
53810-00 – Chrome
53857-00A – Black
53810-00 – Chrome
53857-00A – Black
2000-2002 FLSTC
2003 FLSTC
2000-2001 FLSTS
2002 FLSTS
2003 FLSTS
Detach Sideplates; 53815-00 (Chrome)
or Detachable Tour Pak Rack 53066-00A with O.E. bags.
DOCKING HARDWARE
DIRECTIONAL RELOCATION KIT
53821-00
$24.95
53820-00
$24.95
53821-00
$24.95
53859-02A
$24.95
53930-03
$24.95
53933-03
$24.95
53824-00
$31.95
53820-00
$24.95
53824-00
$31.95
53859-02A
$24.95
53932-03
$31.95
53933-03
$24.95
53815-00 – Chrome
53815-00 – Chrome
53815-00 – Chrome
53815-00 – Chrome
53815-00 – Chrome
53822-00
53931-03
53822-00
53822-00
53931-03
$31.95
$31.95
$31.95
$31.95
$31.95
Not Required
Not Required
53820-00
53859-02A
53933-03
$24.95
$24.95
$24.95
$38.95
Not Required
Not Required
Heritage Springer Detach Passenger
Handrail; 53736-97 (Not compatible with
3-Channel Luggage Rack; 53465-87B)
2000-2002 FLSTS
Not Compatable
90368-97
2003 FLSTS
Not Compatable
53931-03
$31.95
Heritage Springer Detach Solo Rack 53903-00
2000-2001 FLSTS
Not Compatable
2002 FLSTS
Not Compatable
2003 FLSTS
Not Compatable
90368-97 &
90306-97A
90368-97 &
90321-01A
53931-03 &
90366-03
$38.95
$25.95
$38.95
$29.95
$31.95
$29.95
2000-2002 FLSTC
53810-00 – Chrome
53857-00A – Black
53810-00 – Chrome
53857-00A – Black
53821-00 &
53009-03
53930-03 &
53075-03
$24.95
$9.95
$24.95
$24.95
53810-00 – Chrome
53857-00A – Black
53810-00 – Chrome
53857-00A – Black
53821-00 &
53009-03
53930-03 &
53075-03
$24.95
$9.95
$24.95
$24.95
Included With Hard Saddlebags
53810-00 – Chrome
53857-00A – Black
53810-00 – Chrome
53857-00A – Black
53821-00 &
53009-03
53930-03 &
53075-03
$24.95
$9.95
$24.95
$24.95
Included With Hard Saddlebags
Detach Sideplates and Hard Saddlebags 90224-00xx
2003 FLST/C,
Detach Sideplates and Hard Saddlebags 90225-00xx
2000-2001 FXST/S/B
2003 FXST/S/B
Detach Sideplates and Hard Saddlebags 90715-00xx
2000-2002 FLSTF
2003 FLSTF
Not Required
Not Required
Not Required
Included With Hard Saddlebags
Included With Hard Saddlebags
Included With Hard Saddlebags
Included With Hard Saddlebags
* Includes carburetted and EFI models
14287
VSA Partners
Harley-Davidson
Page 252
Price Non-Price Common
252
Softail
Sissy Bar Uprights
A. GENUINE HARLEY-DAVIDSON
SISSY BAR UPRIGHTS FOR SOFTAIL
Manufactured to rigid specifications in the U.S.A. Also
accepts various H-D luggage racks. Backrest pads
sold separately.
Fits all ’84-later Softail models equipped with appropriate sideplates (see sideplate fitment for specific
models) as follows:
1
Rigid-Mount Sideplates
P/Ns 52094-00, 52095-00, 52786-84B, 52791-86A,
53843-00, 53004-98, 53374-03, 53378-03 and
53387-03.
5
Detachable Sideplates
P/Ns 53810-00A, 53815-00, 53549-95, 53857-00A.
Mini Rail Sissy Bar Upright
Unique hidden Backrest Pad Attachment makes for
ultra-clean look with pad removed. NOTE: Must only
be installed on models equipped with Badlander
Custom Seats. Backrest pads must be purchased
separately.
7
1. 52738-94A Chrome Plain.
$59.95
52823-95A
Gloss Black Plain. (not shown) $57.95
Short Rail Sissy Bar Upright
This Sissy Bar upright is lower than traditional low
uprights and the hidden backrest pad mounting system allows for a sleek look when the pad is removed.
2. 52737-94A Chrome Plain.
$65.95
3. 52822-95A Gloss Black Plain.
$62.95
53010-98
Wrinkle Black Plain. (not shown) $39.95
8
4
Low Sissy Bar Uprights
Give your passenger a rest with a Low Sissy Bar
Upright equipped with your choice of Backrest Pad
(sold separately).
Chrome Medallion Plate-Style.
Chrome Medallion Plate-Style.
(Stock on ’00-later FLSTC/I
models). (not shown)
5. 52736-85A Chrome Insert-Style.
Wrinkle Black Medallion
53007-98
Plate Style. (not shown)
6. 52819-95 Gloss Black
Medallion Plate-Style.
4. 52735-85
52731-00
$74.95
$74.95
$74.95
2
$45.95
6
3
$74.95
Tall Sissy Bar Uprights
Let your passenger ride tall in the saddle with a Tall
Sissy Bar Upright equipped with your choice of
Backrest Pad (sold separately).
7. 53552-81A Chrome Insert-Style.
$84.95
8. 52749-85A Chrome Medallion Plate-Style. $84.95
NOTE: All black parts are painted with a special twostep urethane process with hardeners for a durable,
glossy shine. As with any painted surface, care must
be taken when using.
B. CHROME BACKREST MOUNT
A. GENUINE HARLEY-DAVIDSON SISSY BAR UPRIGHTS FOR SOFTAIL
NEW
NEW
Chrome plated backrest mount with hidden fasteners.
Allows the mounting of Sissy Bar medallions or can be
used as is for a clean look.
Mini
52527-01
Short
52531-01
Fits XL, Dyna, and Softail models
equipped with Harley-Davidson
Mini Sissy Bar Upright and
matching Backrest Pad.
$22.95
Fits XL, Dyna, and Softail models
equipped with Harley-Davidson
Short Sissy Bar Upright and
matching Backrest Pad.
$22.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. CHROME BACKREST MOUNT – MINI
(SHOWN WITH DECORATIVE MEDALLIONOVAL WITH BAR & SHIELD)
B. CHROME BACKREST MOUNT – SHORT
14287
VSA Partners
Harley-Davidson
Page 253
Price Non-Price Common
253
NEW
Softail
Medallions & Billet Backrest Mounts
C. DECORATIVE MEDALLIONS
Display a touch of attitude. Ideal for use on plate-style
Sissy Bar uprights and battery covers, the adhesive
backing on these high-quality cast medallions allow
easy installation on most flat surfaces. The medallions
are available in black accented chrome or antique
nickel finishes. The Oval Bar & Shield and the Bar &
Shield with Wings medallions look great with Chrome
Backrest Mount P/N 52527-01 and 52531-01.
C. DECORATIVE MEDALLIONS
Oval with Bar & Shield – Chrome
91716-02
Size 3 3/8" x 1 1/2".
$11.95
Skull – Chrome
91718-02
Size 3 5/8" x 3".
$16.95
Skull – Antique Nickel
91720-02
Size 3 5/8" x 3".
$16.95
Skull with Wings – Chrome
91723-02
Size 5" x 1 1/2".
$11.95
Skull with Wings – Antique Nickel
91732-02
Size 5" x 1 1/2".
$11.95
Bar & Shield with Wings – Chrome
91745-02
Size 4" x 1 1/2".
$11.95
D. BILLET BACKREST MOUNT
FOR MINI RAIL UPRIGHTS
Made from chrome-plated billet aluminium and featuring an engraved Bar & Shield emblem, this backrest
mount cleans up the look of the stock backrest pad by
replacing the stock mounting plate with chrome billet.
Comes complete with chrome-plated hardware. From
the workshop of Wyatt Fuller.
52552-01
Fits XL, Dyna and Softail
models equipped with
Harley-Davidson Mini Sissy
Bar Upright and Backrest Pad.
$39.95
E. BILLET BACKREST MOUNT
FOR SHORT RAIL UPRIGHTS
Chrome-plated billet aluminium and an engraved Bar
& Shield emblem set the tone for this custom backrest
mount, which cleans up the look of the stock backrest
pad by replacing the stock mounting plate with
chrome billet. Comes complete with chrome-plated
hardware. From the workshop of Wyatt Fuller.
52554-01
$43.95
F. CHROME BILLET
SEAT MOUNTING BRACKET
D. BILLET BACKREST MOUNT FOR MINI RAIL UPRIGHTS
The highly stylised design of this bracket adds a
stunning new look to the back of most seats.
51804-02
STOCK BRACKET
E. BILLET BACKREST MOUNT FOR
SHORT RAIL UPRIGHTS
Fits XL, Dyna and Softail
models equipped with HarleyDavidson Short Sissy Bar
Upright and Backrest Pad.
F. CHROME BILLET SEAT MOUNTING BRACKET
Replaces bolt-on seat brackets P/N
51798-00, 51652-97 and 51652-83B
used on most Original Equipment
and accessory seats and pillions.
See parts catalogue or instruction
sheet for your application.
$19.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 254
Price Non-Price Common
254
Softail
Deuce Racks and Sissy Bar Uprights
A. SOFTAIL DEUCE
CHROME LUGGAGE RACK*
This chrome-plated luggage rack is styled after the
Deuce model’s unique console and mounts easily to
the passenger upright with two bolts. For convenience, the rack is easily removable using simple tools.
Requires installation of Passenger Upright Kit P/N
51114-00. Patented.
53806-00
Fits ’00-later FXSTD.
$110.95
Shown with:
SOFTAIL DEUCE PASSENGER
BACKREST PAD
Passenger backrest pad styled to match Passenger
Upright P/N 51114-00.
52549-00
Fits ’00-later FXSTD.
$49.95
B. SOFTAIL DEUCE CHROME
PASSENGER SISSY BAR UPRIGHT
The Deuce was designed to accept this chrome-plated
upright without the need for sideplates, providing a
clean look. The patented design allows the upright to be
mounted directly to the fender, giving the appearance
that the upright comes right out of the seat. Easily
removable, the upright offers you an instant option of
stock Original Equipment look. Mounting hardware
installs in minutes, and is hidden from view by a unique
cut-out in the passenger pillion base.
51114-00
Fits ’00-later FXSTD.
$79.95
C. SOFTAIL DEUCE TALL
SISSY BAR UPRIGHT
This upright offers additional back support for tall passengers. 2" taller than the popular P/N 51114-00 Sissy
Bar Upright, this upright is easily removable, and the
unique mounting system is hidden for a sleek look.
51144-02
Fits ’00-later FXSTD models.
$94.95
A. SOFTAIL DEUCE CHROME LUGGAGE RACK
1
*WARNING: Do not use this rack as a seat. Do
not exceed the fender rack weight capacity.
Using as a seat or exceeding this capacity could
cause handling problems which could result in
loss of control and death or serious injury.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. SOFTAIL DEUCE CHROME
PASSENGER SISSY BAR UPRIGHT
C. SOFTAIL DEUCE TALL
SISSY BAR UPRIGHT
14287
VSA Partners
Harley-Davidson
Page 255
Price Non-Price Common
255
Softail
Luggage Racks
D. CHROME SPORT LUGGAGE RACK*
This hand-polished, chrome-plated rack brings
touring flexibility to Softail models. Can be used with
Detachable or Rigid mount Sissy Bar Sideplates.
53862-00
Fits all Softail models with Detachable
Sideplates or Rigid Mount Sideplates
except models equipped with Mini Rail
Sissy Bar Upright or Short Rail Upright.
(Does not fit Softail models equipped
with one-piece welded Sissy Bar
and sideplates.)
$105.95
E. SOFTAIL TWO-UP SPORT LUGGAGE RACK*
This hand-polished, chrome-plated rack brings twoup touring flexibility to Softail models. Can be used
with Detachable or Rigid mount Sissy Bar sideplates.
53713-96
Fits all Softail models with Detachable
Sideplates or Rigid Mount Sideplates
except models equipped with Mini Rail
Sissy Bar Upright or Short Rail Upright.
(Does not fit Softail models equipped
with one-piece welded Sissy Bar
and sideplates.)
$145.95
F. WRINKLE BLACK TWO-UP
SPORT LUGGAGE RACK*
This rack, designed specifically for the Night Train,
teams up perfectly with our accessory wrinkle black
Sissy Bar and sideplates to create the ultimate custom touring Harley-Davidson motorcycle.
53850-00
Fits all Softail models with Detachable
Sideplates or Rigid Mount Sideplates
except models equipped with Mini Rail
Sissy Bar Upright or Short Rail Upright.
(Does not fit Softail models equipped
with one-piece welded Sissy Bar
and sideplates.)
$110.95
D. CHROME SPORT LUGGAGE RACK
1
E. SOFTAIL TWO-UP SPORT LUGGAGE RACK
F. WRINKLE BLACK TWO-UP
SPORT LUGGAGE RACK
*WARNING: Do not use this rack as a seat. Do
not exceed the fender rack weight capacity.
Using as a seat or exceeding this capacity could
cause handling problems which could result in
loss of control and death or serious injury.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 256
Price Non-Price Common
256
Softail
Chrome Racks
A. CHROME BOBTAIL FENDER RACK*
Not only is it functional, but it’s a great way to emphasize the legendary lines of the Bobtail. Designed for
easy installation on models with or without Sissy Bar
Uprights. A stamped “Harley-Davidson” nameplate
adds the finishing touch.
56481-03
56466-86C
Fits ’00-later FXST, FXSTB and
FXSTS models. Seat Bracket
Kit P/N 52030-98 is necessary
for installation when used with
Original Equipment Seat.
$89.95
Fits ’84-’99 FXST, FXSTB, FXSTC,
FXSTSB, FXSTS and ’86-earlier FXWG,
FX models with Bobtail Fender Kit.
(Does not fit FXDWG.)
$69.95
B. HERITAGE SPRINGER
DETACHABLE SOLO RACK*
Can be installed or removed in 60 seconds or less
with no tools. Detachable convenience with characteristic Heritage Springer styling.
53903-00
53715-97
Fits ’00-later FLSTS models.
’00-’01 models require separate
purchase of Detachable Docking
Hardware Kits P/Ns 90368-97 and
90306-97A. ’02 models require the
separate purchase of Rear Docking
Kits P/N’s 90321-00 and 90368-97.
’03 models require separate purchase
of hardware kit P/N 53931-03
and 90366-03
$219.95
Fits ’97-’99 FLSTS models. Requires
separate purchase of Detachable
Docking Hardware Kits P/Ns
90368-97 and 90306-97A.
$199.95
C. HERITAGE SPRINGER
DETACHABLE TWO-UP RACK*
Chrome-plated rack features nostalgic Heritage
Springer styling.
53740-97
Fits ’97-’99 FLSTS models with
Detachable Docking Hardware Kits
P/Ns 90368-97 and 90306-97A.
(Does not work with Rigid
Sideplate Kit P/N 52786-84B.) $234.95
Heritage Springer Detachable
Docking Hardware Kits (not shown)
90368-97
Fits ’97-later FLSTS models.
90306-97A
90321-01A
Includes front hardware.
Fits ’97-’01 FLSTS models.
Includes rear hardware.
Fits ’02-later FLSTS models.
Includes rear hardware.
$38.95
$25.95
$29.95
A. CHROME BOBTAIL FENDER RACK
TURN SIGNAL RELOCATION KIT (not shown)
90366-03
Fits ’03-later FLSTS models.
Kit required for Heritage
Springer Detachable Solo
Rack P/N 53903-00.
$29.95
1
*WARNING: Do not use this rack as a seat. Do
not exceed the fender rack weight capacity.
Using as a seat or exceeding this capacity could
cause handling problems which could result in
loss of control and death or serious injury.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. HERITAGE SPRINGER
DETACHABLE SOLO RACK
C. HERITAGE SPRINGER
DETACHABLE TWO-UP RACK
14287
VSA Partners
Harley-Davidson
Page 257
Price Non-Price Common
257
Softail
Chrome Luggage Racks
D. CHROME 3-CHANNEL
LUGGAGE RACK WITH HANDRAIL*
53831-00
Fits all ’00-’02 Softail models
(except FXSTD). FLSTC and FLSTS
models only require a separate purchase
of Mounting Kit P/N 68773-97A. (Does
not fit with seats with rider backrests or
bucket style seats.) (Does not fit
with Detachable Sideplates.)
$136.95
Chrome 3-Channel
Luggage Rack With Handrail*
Includes spacers necessary for mounting on ’90’99 FLSTC models with factory-equipped leather
saddlebags.
53465-87B
Fits all ’84-’99 Softail models including
FLSTS Heritage Springer. FLSTS models
require Mounting Hardware Kit P/N
68773-97A (not shown) for installation.
FXSTC, FXSTS/B and FLSTF models
require installation of Directional
Relocation Kit P/N 68548-87A. NOTE:
May interfere with licence plates in some
states when installed on Softail models.
Will not work with Detachable Handrail
P/N 53736-97 or with Softail
seats with rider backrest.
$135.95
Mounting Kit for 3-Channel Luggage Rack
68773-97A Fits ’84-’02 FLSTC and
FLSTS models only.
$19.95
Directional Relocation Kit (not shown)
Includes all necessary mounting hardware.
68548-87A
Required to install P/N 53465-87B
on ’86-’99 FXSTC, FXSTS,
FXSTSB and FLSTF models.
$25.95
E. CHROME MINI LUGGAGE RACK*
52775-71
Can be installed on all sport
models equipped with tall Sissy Bar
uprights, which include XL, FXR, FX,
FXWG, FXD/FXDWG Dyna Glide,
and all Softail models. Also fits
’99 FXR models.
$65.95
Chrome 4-Channel Luggage Rack*
Attaches to inside of sideplates for an attractive,
factory-installed appearance.
56465-86A
D. CHROME 3-CHANNEL LUGGAGE RACK WITH HANDRAIL
Fits ’86-later FLST, FLSTC, FLSTF,
and FLSTN models. (H-D accessory
Sissy Bar Upright and Sideplates
required on ’87-’91 FLSTC and all
FLST, FLSTF, and FLSTN models.)
(Does not fit FLSTS.) NOTE: Does not
fit ’87-’91 FLSTC models equipped
with stock production welded onepiece Sissy Bar sideplates. (Does
not work with Detachables).
$129.95
F. CHROME 3-CHANNEL
LUGGAGE/FENDER RACK*
Includes all necessary mounting hardware.
53461-90*
Fits ’86-’02 Softail models
equipped with Solo Seat.
’86-’01 Softail models require
Directional Relocation Kit P/N
53491-92A. ’02 models require
Directional Relocational Kit
P/N 53859-02A. (Does not
fit FXSTD.)
$104.95
FLSTF Fat Boy Directional Extension Kit
(not shown)
Machined directional supports are chrome-plated and
allow for proper installation of Luggage Racks P/N
53461-90 or P/N 53465-87B.
53491-92A
1
E. CHROME LUGGAGE RACKS
F. CHROME 3-CHANNEL
LUGGAGE/FENDER RACK
Fits ’90-’01 Softail models.
$24.95
*WARNING: Do not use this rack as a seat. Do
not exceed the fender rack weight capacity.
Using as a seat or exceeding this capacity could
cause handling problems which could result in
loss of control and death or serious injury.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 258
Price Non-Price Common
258
Softail
Hard Saddlebags
A. HERITAGE SOFTAIL CLASSIC
HARD SADDLEBAG KIT*
The Heritage Softail Classic has been turning heads
on the street for years. Now there’s an accessory
option that gives it a new custom look. These lockable, injection-moulded hard saddlebags are paintedto-match factory colours and have approximately
20% more total capacity than the Original Equipment
saddlebags used on the Heritage Softail when used
with Saddlebag Liners P/N 91778-00.
Fits ’87-later FLSTC models. Fits with Detachable
Sissy Bars and Luggage Racks or with Rigid-Mounted
Sissy Bar. Use Hardware Kit P/N 53075-03 to install
saddlebags on ’03 Softail models equipped with
Detachables. Use Hardware Kit P/N 53009-03 to
install saddlebags on ’87-’02 Softail models equipped
with Detachables. Installation requires the use of
Narrow Chrome Directional Bar P/N 68611-98 to provide access to the locks. If equipped with Detachable
Sissy Bar or Luggage Rack, the Narrow Chrome
Directional Bar is not required. Installation on a Softail
equipped with wide tyre requires the purchase of
Hardware Kit P/N 90299-00. (Note: Will not fit with
Chrome 3-Channel Luggage Rack with Handrail P/N
53831-00 or 53465-87B or Chrome Rear Saddlebag
Guards P/Ns 49158-89D or 49261-00.)
90224-03BDK Primed.
90224-03BDT Matches ’03 Gunmetal
Pearl FLSTC models.
90224-03BDP Matches ’03 Sterling
Silver FLSTC models.
90224-03ZB Matches ’03 White Pearl
FLSTC models.
90224-03BBN Matches ’02 Real Red
FLSTC models.
90224-03XE Matches ’01-’03 Luxury
Blue FLSTC models.
90224-03XF Matches ’01-’02 Jade
Sunglo FLSTC models.
90224-03XG Matches ’01-’02 Real Teal
FLSTC models.
90224-03DH Matches ’87-’03 Vivid
Black FLSTC models.
90224-03KB Matches ’00-’02 Suede
Green FLSTC models.
90224-03ZQ Matches ’00-’03 Luxury
Rich Red FLSTC models.
90224-03QB Matches ’00-’01 Chrome
Yellow FLSTC models.
90224-03QC Matches ’00-’01 Bronze
Pearl FLSTC models.
90224-03NV Matches ’99-’00 Aztec
Orange Pearl FLSTC models.
90224-03NR Matches ’98-’00 Sinister
Blue Pearl FLSTC models.
90224-03DG Matches ’99 and ’95 Nugget
Yellow FLSTC models.
90224-03LZ Matches ’99 Scarlet
Red FLSTC models.
90224-03NA Matches ’98-’99 Lazer
Red FLSTC models.
SOFTAIL HARD SADDLEBAG
HARDWARE KIT (not shown)
90299-00
Required to install Hard
Saddlebags on Softail models
equipped with wide rear tyre.
$829.95
$949.95
$999.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
A. HERITAGE SOFTAIL CLASSIC HARD SADDLEBAGS
$949.95
$949.95
$949.95
$949.95
$29.95
SOFTAIL HARD SADDLEBAG
HARDWARE KIT
Used to install hard saddlebags on Softail models
equipped with Detachables.
53075-03
53009-03
Required on ’03 Softail
models equipped with
Detachables (except FXSTD).
Required on ’87-’02 Softail
models equipped with
Detachables (except FXSTD).
$24.95
$9.95
*NOTE: This product is a “paint to order” accessory.
Please allow an average of 5 weeks delivery for
this item.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. HARD SADDLEBAGS FOR FAT BOY MODELS
14287
VSA Partners
Harley-Davidson
Page 259
Price Non-Price Common
259
Softail
Hard Saddlebags
B. HARD SADDLEBAGS
FOR FAT BOY MODELS*
Give a leaner look to your Fat Boy with these new hard
saddlebags. You’ll not only get lockable storage convenience, but you’ll add to the smooth profile of your
Softail. The saddlebags are injection-moulded from
high-impact composite materials, painted to match
factory colours and can hold about 20% more gear
than the Original Equipment Heritage Softail saddlebags when used with Saddlebag Liners P/N 91778-00.
Fits ’90-later FLSTF and FLSTN models. Also fits with
Detachables. Use Hardware Kit P/N 53075-03 to
install saddlebags on ’03 Softail models equipped
with Detachables. Use Hardware Kit P/N 53009-03 to
install saddlebags ’87-’02 Softail models equipped
with Detachables.
C. SOFTAIL HARD SADDLEBAGS
C. SOFTAIL HARD SADDLEBAG KIT*
These hard saddlebags offer not only lockable storage
convenience, but they provide style with flowing lines
worthy of the Softail family. They are injection-moulded from high-impact composite materials, painted-tomatch the factory colours and have approximately
20% more total capacity than the Original Equipment
saddlebags used on the Heritage Softail when used
with Saddlebag Liners P/N 91778-00.
Fits ’87-’99 FXSTC, ’87-later FXST, FXSTS and FXSTB
models. Fits with Detachable Sissy Bars and Luggage
Racks or with Rigid-Mounted Sissy Bar. Use
Hardware Kit P/N 53075-03 to install saddlebags on
’03 Softail models equipped with Detachables. Use
Hardware Kit P/N 53009-03 to install saddlebags ’87’02 Softail models equipped with Detachables. Will
also fit FLSTF models if exhaust system is changed to
Staggered Duals. Installation on a Softail equipped
with wide tyre requires the additional purchase of
Hardware Kit P/N 90299-00. (NOTE: Will not fit with
Chrome 3-Channel Luggage Rack with Handrail P/N
53831-00 or 53465-87B or Chrome Rear Saddlebag
Guards P/Ns 49158-89D or 49261-00.)
90225-03BDK Primed.
$829.95
90225-03BDT Matches ’03 Gunmetal Pearl
FXST, FXSTS, FXSTB models. $949.95
90225-03ZB Matches ’03 White Pearl FXST,
FXSTS, FXSTB models.
$949.95
90225-03BBP Matches ’02 Impact
Blue FXST models.
$949.95
90225-03XE Matches ’01-’03 Luxury Blue FXST,
FXSTB, FXSTS models.
$949.95
90225-03XF Matches ’01-’02 Jade Sunglo
FXST, FXSTB, FXSTS models. $949.95
90225-03XG Matches ’01-’02 Real Teal FXST,
FXSTB, FXSTS models.
$949.95
90225-03DH Matches ’87-’99 Vivid Black
FXSTC; ’87-’03 Vivid Black FXST,
FXSTS and FXSTB models. $949.95
90225-03QH Matches ’00-’02 Concord Purple
FXST, FXSTS models.
$949.95
90225-03ZQ Matches ’00-’03 Luxury Rich
Red FXST, FXSTS models.
$949.95
90225-03ZL Matches ’99 FXSTC;
’99-’02 Diamond Ice Pearl
FXST, FXSTS models.
$949.95
90225-03NV Matches ’99 FXSTC;
’99-’00 Aztec Orange Pearl
FXST, FXSTS models.
$949.95
90225-03NR Matches ’98-’00 Sinister
Blue Pearl FXST, FXSTC,
FXSTS models.
$949.95
90225-03ZA Matches ’99 Cobalt Blue
FXSTC, FXSTS models.
$949.95
90225-03NA Matches ’98-’99 Lazer Red
FXST, FXSTC, FXSTS models. $949.95
90715-03BDK Primed.
90715-03BDT Matches ’03 Gunmetal
Pearl FLSTF models.
90715-03BDP Matches ’03 Sterling
Silver FLSTF models.
90715-03BBP Matches ’02 Impact
Blue FLSTF models.
90715-03BBN Matches ’02 Real Red
FLSTF models.
90715-03ZB Matches ’00-’03 White
Pearl FLSTF models.
90715-03DH Matches ’90-’03 Vivid
Black FLSTF models.
90715-03QH Matches ’00-’02 Concord
Purple FLSTF models.
90715-03ZQ Matches ’00-’03 Luxury
Rich Red FLSTF models.
90715-03XF Matches ’01-’02 Jade
Sunglo FLSTF models.
90715-03XE Matches ’01-’03 Luxury
Blue FLSTF models.
90715-03XG Matches ’01-’02 Real
Teal FLSTF models.
90715-03QC Matches ’00-’01 Bronze
Pearl FLSTF models.
90715-03QB Matches ’00-’01 Chrome
Yellow FLSTF models.
90715-03KB Matches ’00-’01 Suede
Green FLSTF models.
Matches ’01 Diamond Ice
90715-03ZL
Pearl FLSTF models.
90715-03NV Matches ’99-’01 Aztec
Orange Pearl FLSTF models.
Matches ’99 Scarlet
90715-03LZ
Red FLSTF models.
90715-03NA Matches ’98-’99 Lazer
Red Pearl FLSTF models.
90715-03NR Matches ’98-’99 Sinister Blue
Pearl FLSTF models.
90715-03DG Matches ’95 and ’99 Nugget
Yellow FLSTF models.
$829.95
$949.95
$999.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
*NOTE: This product is a “paint to order” accessory.
Please allow an average of 5 weeks delivery for
this item.
14287
VSA Partners
Harley-Davidson
Page 260
Price Non-Price Common
260
Softail
Deuce Hard Saddlebags and Liner
A. SOFTAIL DEUCE HARD
SADDLEBAGS*
Among the accessory-friendly features built into the
Softail Deuce are pre-drilled holes that make installation of these unique saddlebags easy and inconspicuous. These injection-moulded saddlebags have
approximately 20% more total capacity than the
Original Equipment saddlebags used on the Heritage
Softail when used with Saddlebag Liners P/N 9177800, are lockable and feature a clean surface that
results in ideal painted finish. The patented mounting
system allows you to easily remove the saddlebags
and support system, restoring the Deuce quickly to
the Original Equipment look. Includes a turn signal
relocation kit, all hardware and reflectors.
Fits ’00-later FXSTD models. Can not be used with
Turn Signal Module Kit P/N 68216-00.
90394-00
90394-03BDT
90394-03BDP
90394-03BFA
90394-03ZB
90394-02BBN
90394-01XE
90394-01XG
90394-00DH
90394-00ZQ
90394-00NV
90394-00NR
90394-00ZL
90394-00QH
Primed.
Fits ’00-later FXSTD models.
Matches ’03 Gunmetal
Pearl FXSTD models.
Matches ’03 Sterling
Silver FXSTD models.
Matches ’03 Centennial
Gold FXSTD models.
Matches ’03 White Pearl
FXSTD models.
Matches ’02 Real
Red FXSTD models.
Matches ’01-’03 Luxury
Blue FXSTD models.
Matches ’01-’02 Real
Teal FXSTD models.
Matches ’00-’03
Vivid Black FXSTD models.
Matches ’00-’03 Luxury
Rich Red FXSTD models.
Matches ’00 Aztec Orange
Pearl FXSTD models.
Matches ’00 Sinister
Blue Pearl FXSTD models.
Matches ’00-’01 Diamond
Ice Pearl FXSTD models.
Matches ’00-’02 Concord
Purple FXSTD models.
$829.95
$949.95
$999.95
$999.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
$949.95
B. SADDLEBAG LINERS
FOR SOFTAIL HARD SADDLEBAGS
Custom fit to the Softail hard saddlebags, these liners
make packing easier and more efficient and allow you
to take advantage of the 20% larger capacity of the
hard bag. These well constructed, water-resistant
bags are designed to fit right into your saddlebags
and include handy inner storage pockets. They feature
convenient carrying straps and an embroidered Bar &
Shield logo. Sold in pairs.
91778-00
Fits ’00-later Softail
models equipped with Softail
Hard Saddlebags.
A. SOFTAIL DEUCE HARD SADDLEBAGS
$44.95
*NOTE: This product is a “paint to order” accessory.
Please allow an average of 5 weeks delivery for
this item.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. SADDLEBAG LINERS FOR SOFTAIL
HARD SADDLEBAGS
B. SADDLEBAG LINERS FOR SOFTAIL
HARD SADDLEBAGS
14287
VSA Partners
Harley-Davidson
Page 261
Price Non-Price Common
261
Softail
Leather Saddlebags
C. LEATHER SADDLEBAGS
FOR SOFTAIL DEUCE
The Softail Deuce is well on its way to becoming a
motorcycle classic – and these leather bags will help
complete the journey. Styled to match the Deuce with
chrome buckles, top-grain cowhide and a sleek
“Deuce” logo, these bags feature an ingenious mounting mechanism that eliminates all visible hardware.
90404-00
Fits ’00-later FXSTD models.
Requires use of Saddlebag Support
Kit P/N 68360-00 and Directional
Relocation Kit P/N 90395-00
for installation.
$575.00
SADDLEBAG SUPPORT KIT
FOR SOFTAIL DEUCE (not shown)
Required for the Deuce Bags, this mounting system
eliminates all visible hardware, allowing you to profile
down the highway in style.
68360-00
Fits ’00-later FXSTD models.
Required to install Softail Deuce
Saddlebags P/N 90404-00
and 92018-03. Also requires
separate purchase of Directional
Relocation Kit P/N 90395-00
for installation.
$185.99
D. LOCKING LEATHER COVERED RIGID
SADDLEBAGS FOR SOFTAIL MODELS
These saddlebags offer a premium leather look with
an extra-durable construction. The blow-moulded
core keeps the bag rigid and prevents sagging, while
the unique lids open outward for added flair. Bags feature locks for additional security.
53061-00
C. LEATHER SADDLEBAGS FOR SOFTAIL DEUCE
Fits ’00-later Softail models
(except FXSTD). Fits ’84-’99
Softail models with separate
purchase of Directional Relocation
Kit P/N 53692-96. (FLSTC and FLSTS
models do not require this Directional
Relocation Kit.) (Does not fit ’84-’99
models equipped with Detachables.)
Does not fit with Rear Axle Covers or
Wide Tyre Kit P/N 43684-99. Does
not fit with Flat Lens Turn Signal
Kit P/N 68431-95
$799.00
NOTE: Installation of these saddlebags with the
following seats requires the use of Spacer Kit P/N
90976-01A: seats with rider backrests, double bucket
seats, diamondback seats, stock FLSTF seat, stock
FLSTC seat, and any other seats that contact the lid of
the saddlebag. Spacer Kit not required if mounting with
Harley-Davidson detachable Sissy Bar Sideplates.
Directional Relocation Kit (not shown)
Provides clearance for various Harley-Davidson
leather saddlebags and/or luggage racks.
53692-96
D. LOCKING LEATHER COVERED RIGID SADDLEBAGS FOR SOFTAIL MODELS
Fits ’84-’99 FXST, FXSTC, FXSTS,
FLSTF and FXSTSB. Required
in order to mount Sissy Bar
docking hardware on all ’84’99 FXSTSB, FXSTS, FXST,
FXSTC and FLSTF models.
$34.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 262
Price Non-Price Common
262
Softail
Leather Saddlebags
A. ALLIGATOR SADDLEBAGS
FOR SOFTAIL MODELS
Make a statement with these exotic leather bags.
Crafted from premium materials, they feature a genuine alligator inlay that complements the Exotic Seat
Collection, or looks great on its own. All mounting
brackets, hardware and instructions are included.
Available in U.S. only.
91555-01
Fits all ’00-later Softail models (except
FXSTD). Also fits ’84-’99 Softail models
equipped with Turn Signal Relocation
Kit P/N 53692-96. (Does not fit ’84-’99
models equipped with Detachables.)
(Does not fit with Rear Axle Covers or
Wide Tyre Kit P/N 43684-99.) (Does
not fit with Flat Lens Turn Signal
Kit P/N 68431-95.)
$799.00
NOTE: Alligator is a natural material. Scale patterns
may vary, this should not be considered a defect.
B. LARGE LEATHER SADDLEBAGS
These saddlebags have plenty of extra room for all of
your accessories and are built for superior durability.
These bags were put through rigorous testing to
ensure the highest quality and are styled with looks
that complement the Softail line.
90119-00
Fits ’00-later Softail models (except
FLSTF, FXSTD, and models with
shotgun style exhaust). Also fits
’84-’99 FXST models when used
with Directional Relocation Kit P/N
53692-96. (Does not fit ’84-’99
models equipped with Detachables.)
(Will not fit with Flat Lens Turn Signal
Kit P/N 68431-95, or any Rear Axle
Covers. Does not fit with Wide
Tyre Kit P/N 43684-99.)
$599.95
A. ALLIGATOR SADDLEBAGS FOR SOFTAIL MODELS
NOTE: These Harley-Davidson products are made of
leather. Fine leathers or other natural materials WILL
gain “character,” such as wrinkles or wear, with age.
This is normal. A fine, aged patina and character wrinkles are a sign of the extremely high quality materials
used to construct your seat, backrest or saddlebags.
The appearance of scars or marks on the leather are
a result of using natural leather panels and should not
be thought of as an imperfection. Please use HarleyDavidson Leather Dressing P/N 98261-91V to protect
your investment.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. LARGE LEATHER SADDLEBAGS
14287
VSA Partners
Harley-Davidson
Page 263
Price Non-Price Common
263
Softail
Leather Saddlebags
C. SOFTAIL HARNESS LEATHER
SADDLEBAGS – FAT BOY
Fat Boy bags made from high-quality harness leather
and styled to complement your Fat Boy with the
embossed Fat Boy logo.
92000-00B
Fits all ’00-later Softail models
(except FXSTD). Also fits ’84-’99
FLSTF and FXST models when used with
Directional Relocation Kit P/N 53692-96.
(Does not fit ’84-’99 models equipped
with Detachables.) (Does not fit with
Wide Tyre Kit P/N 43684-99.) (Does
not fit with Flat Lens Turn Signal Kit
P/N 68431-95.) (Does not fit with
Rear Axle Covers.)
$699.95
D. LEATHER SADDLEBAGS
FOR FAT BOY MOTORCYCLES
You can take your Twin Cam 88B-equipped Fat Boy a
long way with these large, cavernous bags that provide for plenty of storage for the long haul. Styled to
match your Fat Boy with Fat Boy logo and braiding.
91536-00
Fits ’00-later Softail models (except
FXSTD). Also fits ’84-’99 FLSTF
and FXST models when used
with Directional Relocation Kit
P/N 53692-96. (Does not fit ’84-’99
models equipped with Detachables.)
(Will not fit with Flat Lens Turn
Signal Kit P/N 68431-95.) (Does
not fit with Rear Axle Covers.) $589.95
C. SOFTAIL HARNESS LEATHER SADDLEBAGS – FAT BOY
NOTE: These Harley-Davidson products are made of
leather. Fine leathers or other natural materials WILL
gain “character,” such as wrinkles or wear, with age.
This is normal. A fine, aged patina and character wrinkles are a sign of the extremely high quality materials
used to construct your seat, backrest or saddlebags.
The appearance of scars or marks on the leather are
a result of using natural leather panels and should not
be thought of as an imperfection. Please use HarleyDavidson Leather Dressing P/N 98261-91V to protect
your investment.
D. LEATHER SADDLEBAGS FOR FAT BOY MOTORCYCLES
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 264
Price Non-Price Common
264
Softail
Leather Saddlebags
A. SYNTHETIC LEATHER
SADDLEBAGS FOR SOFTAIL MODELS
An exciting new break-through in saddlebags, these
handsome bags are the perfect accessory for your
Softail. The large interior leaves plenty of room for all
of your essentials and an inner pocket allows
for quick access to small items such as keys, sunglasses, and wallets.
91537-00A
Fits ’00-later Softail models (except
FLSTF, FXSTD, and models with
shotgun style exhaust). Also fits
’84-’99 FXST models when used
with Directional Relocation Kit P/N
53692-96. (Does not fit ’84-’99
models equipped with Detachables.)
(Will not fit with Flat Lens Turn Signal
Kit P/N 68431-95, or any Rear Axle
Covers. Does not fit with Wide
Tyre Kit P/N 43684-99.)
$459.95
B. LEATHER THROW-OVER
SADDLEBAGS FOR SOFTAIL MODELS
With these leather throw-over saddlebags, you get an
economical and convenient storage option for touring
on your Softail. Just install the padded yoke under your
passenger seat, and the quick-disconnect saddlebag
attachment straps allow easy on-and-off convenience.
91449-01
Fits all ’00-later Softail models
(except FXSTD and FLSTS)
with two-up seats. Solo seats
require installation of passenger
pillion. Requires Chrome
Saddlebag Support Kit P/N
91790-84C. (Will not fit with
Detachable sideplates, racks
or Rear Axle Covers.)
$299.95
Chrome Saddlebag Support Kit
Fits with or without Sissy Bar Uprights, attaches
easily, and protects throw-over bags from contacting
brake and swingarm.
91790-84C
Fits ’84-later Softail models
(except FXSTD and FLSTS).
(Will not fit with Detachable
sideplates or racks.)
A. SYNTHETIC LEATHER SADDLEBAGS FOR SOFTAIL MODELS
$49.95
NOTE: These Harley-Davidson products are made of
leather. Fine leathers or other natural materials WILL
gain “character,” such as wrinkles or wear, with age.
This is normal. A fine, aged patina and character wrinkles are a sign of the extremely high quality materials
used to construct your seat, backrest or saddlebags.
The appearance of scars or marks on the leather are
a result of using natural leather panels and should not
be thought of as an imperfection. Please use HarleyDavidson Leather Dressing P/N 98261-91V to protect
your investment.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. LEATHER THROW-OVER SADDLEBAGS FOR SOFTAIL MODELS
14287
VSA Partners
Harley-Davidson
Page 265
Price Non-Price Common
265
Softail
Leather Saddlebags
C. LARGE CAPACITY SOFTAIL
LEATHER SADDLEBAGS
Designed specifically for the new Softail configuration,
these bags offer additional room for added storage.
With chrome buckles and a “Harley-Davidson” logo,
these bags look as good as they work.
90130-00B
Fits all ’00-later Softail models without
shotgun style exhaust. (Does not fit
with Wide Tyre Kit P/N 43684-99.)
Also fits ’84-’99 Softail models (except
FLSTF and models equipped with
shotgun style exhaust) with the use
of the Directional Turn Signal Relocation
Kit P/N 53692-96. (Does not fit ’84-’99
models equipped with Detachables.)
(Does not fit with Flat Lens Turn
Signal Kit P/N 68431-95.) (Does
not fit with Rear Axle Covers.) $679.95
D. SOFTAIL LEATHER
SADDLEBAGS – FAT BOY STYLING
Styled to complement the Fat Boy with the distinctive Fat Boy concho, wider is definitely better when
it comes to these bags, the widest available for
Softail models.
90320-00B
Fits all ’00-later Softail models
(except FXSTD). Also fits ’84-’99
FLSTF and FXST models when used
with Directional Relocation Kit
P/N 53692-96. (Does not fit ’84-’99
models equipped with Detachables.)
(Does not fit with Wide Tyre Kit
P/N 43684-99.) (Does not fit
with Flat Lens Turn Signal Kit
P/N 68431-95.) (Does not fit
with Rear Axle Covers.)
$669.95
C. LARGE CAPACITY SOFTAIL LEATHER SADDLEBAGS
NOTE: These Harley-Davidson products are made of
leather. Fine leathers or other natural materials WILL
gain “character,” such as wrinkles or wear, with age.
This is normal. A fine, aged patina and character wrinkles are a sign of the extremely high quality materials
used to construct your seat, backrest or saddlebags.
The appearance of scars or marks on the leather are
a result of using natural leather panels and should not
be thought of as an imperfection. Please use HarleyDavidson Leather Dressing P/N 98261-91V to protect
your investment.
D. SOFTAIL LEATHER SADDLEBAGS – FAT BOY STYLING
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 266
Price Non-Price Common
266
Softail
Leather Saddlebags and Liners
A. HERITAGE STYLE SADDLEBAG KIT
Top grade cowhide saddlebag is decorated with
chrome studs and three chrome-plated brass medallions coined with the Harley-Davidson Bar & Shield.
Saddlebag tops have rivet-reinforced corners and are
secured with heavy leather straps and roller-type,
easy-access buckles. Necessary hardware and
instructions are included. (Directional Relocation Kit
P/N 68548-87A is necessary for FXST, FXSTB,
FXSTC, FXSTS, FXSTSB models.)
90835-90C
Fits ’84-’99 FXST, FXSTC, FXSTS,
and FXSTSB models. Also fits late
’86-’99 FLST and FLSTC models.
Stock on ’94-’99 FLSTC. (Does not
fit FLSTF, FLSTS or FLSTN.) (Does
not fit with Rear Axle Covers.) $699.95
Directional Relocation Kit (not shown)
Includes all necessary mounting hardware.
68548-87A
Required to install P/N 53465-87B
on ’86-’99 FXSTC, FXSTS and
FXSTSB models.
$25.95
A. HERITAGE STYLE SADDLEBAG KIT
B. SADDLEBAG LINERS FOR
LEATHER SADDLEBAGS
Water-resistant liners make packing easy. Feature
inner pockets for extra storage and an embroidered
Bar & Shield logo.
91957-97
Fits Heritage Softail Classic
and Heritage Springer style
saddlebags and Sportster Leather
Saddlebags P/N 90598-96B,
90119-00A and 91537-00A.
(Also fits P/Ns 90130-00B,
90835-90C, 90342-98A,
and 90300-98.) (pair)
$44.95
C. SADDLEBAG LINERS
FOR LEATHER SADDLEBAGS
Water-resistant liners make packing easy. Features
include inner pockets for extra storage and an embroidered Bar & Shield logo.
91956-97
91958-97
Fits Fat Boy Saddlebags
P/Ns 90320-00A, 90697-96,
90831-91, 90833-90B, 90975-96,
90975-95, 90973-95, 53061-00,
91555-01, 91536-00A,
92000-00B and 92015-03 (pair) $44.95
Fits with Saddlebags
P/Ns 90901-95, 90130-00A,
90990-95, 91190-97.
Also fits ’02-later VRSC
Hard Saddlebags.
$44.95
D. SADDLEBAG LINERS
FOR SOFTAIL HARD SADDLEBAGS
B. SADDLEBAG LINERS
FOR LEATHER SADDLEBAGS
C. SADDLEBAG LINERS FOR
LEATHER SADDLEBAGS
D. SADDLEBAG LINERS FOR SOFTAIL
HARD SADDLEBAGS
E. SQUARE SADDLEBAG COOLER
Custom fit to the Softail hard saddlebags, these liners
make packing easier and more efficient and allow you
to take advantage of the 20% larger capacity of the
hard bag. These well constructed, water-resistant
bags are designed to fit right into your saddlebags
and include handy inner storage pockets. They feature
convenient carrying straps and an embroidered Bar &
Shield logo. Sold in pairs.
91778-00
Fits ’00-later Softail models
equipped with Softail
Hard Saddlebags.
$44.95
E. SQUARE SADDLEBAG COOLER
Turn your saddlebag into a refrigerator. The insulating
liner keeps cold in, and the convenient zipper closure
makes packing easy. The square shape fits easily into
most hard and soft saddlebags and has room for up
to twelve 12 oz. soda cans.
94185-01
Fits ’93-later Touring models
equipped with stock saddlebags,
’86-later FLSTC and ’97-later
FLSTS models equipped with
stock leather saddlebags.
$39.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 267
Price Non-Price Common
267
Softail
Soft Bag Locks
F. SOFT BAG LOCK
Finally, a simple theft deterrent for soft saddlebags
that eliminates the need for constant emptying or worrying about your belongings. This ingenuous set
includes four individual stylised locks and two keys.
Fits most soft bags with 1-1/2" to 2" wide buckle-style
straps. (Does not work with quick-disconnect buckles.) Patent pending. (Shown on Softail Saddlebag
P/N 90130-00A.)
46109-98
$39.95
G. SISSY BAR UPRIGHT
SELF-ADHESIVE MEDALLIONS
F. SOFT BAG LOCK
Made In U.S.A. Eagle
1. 99000-77 Large Medallion.
2. 32510-77 Small Medallion.
$16.95
$10.95
Bar & Shield
3. 91815-85 Large Medallion.
4. 91816-85 Small Medallion.
$15.50
$10.00
Eagle With Feathered Wings
5. 91811-85 Large Medallion.
6. 91810-85 Small Medallion.
$14.95
$10.00
Installation Tips: Clean the surface by rubbing
(ISOPROPYL) alcohol on it. Position medallion and
press firmly in place. Let set for 24 hours.
Sissy Bar Upright Insert
6
5
Fits Low and Tall Insert-Style H-D Sissy Bar Uprights.
7. 91807-85 Eagle with Feathered Wings.
$27.95
H. SADDLEBAG MEDALLIONS
7
These chrome-plated brass medallions, coined with
the Harley-Davidson Bar & Shield logo, have six
mounting prongs for use in a wide variety of applications.
3
90471-90
90470-90
4
Left Medallion.
Right Medallion.
$6.25
$6.25
I. HERITAGE SPRINGER
SADDLEBAG REFLECTOR KIT
A classic addition to the Heritage Springer saddlebags. These stock FLSTS saddlebag reflectors can be
used on any leather saddlebag.
59269-97
1
H. SADDLEBAG MEDALLIONS
Chrome spots are the final touch for the saddlebags
on the Heritage Springer. FLSTS saddlebags come
with precut holes for mounting, but ornaments can be
used on any leather saddlebag.
59257-97
I. HERITAGE SPRINGER
SADDLEBAG REFLECTOR KIT
$30.00
J. HERITAGE SPRINGER
SADDLEBAG ORNAMENT KIT
2
G. SISSY BAR UPRIGHT SELF-ADHESIVE
MEDALLIONS AND INSERT
Package of 8.
J. HERITAGE SPRINGER
SADDLEBAG ORNAMENT KIT
Package of 8.
$37.00
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 268
Price Non-Price Common
268
Softail
Tour-Paks
A. TOUR-PAK FOR HERITAGE
SOFTAIL CLASSIC MODELS
This Tour-Pak, along with the smooth performance of
the Twin Cam 88B engine, suddenly makes the
Heritage Softail Classic the ultimate touring bike. A
cavernous interior will hold one full-face helmet or two
half helmets. Beyond the ample storage, it is also
styled to match your Heritage Softail Classic Seat with
chrome spots and concho. Includes backrest pad,
interior rubber mat, hardware, and instructions.
53151-00
Fits ’00-later Softail models equipped
with Detachable Tour-Pak Rack P/N 53066-00A.
HDI models require the use of Licence Plate
Relocation Kit P/N 60095-00.
$599.00
1
*WARNING: Do not use this rack as a seat. Do
not exceed the fender rack weight capacity.
Using as seat or exceeding this capacity could
cause handling problems which could result in
loss of control and death or serious injury.
B. SPORT TOUR-PAK*
Designed to complement the styling of the Softail
Hard Saddlebags, the colour-matched Sport Tour-Pak
adds increased storage for your ride across town or
across the country. The injection moulded Tour-Pak is
lockable, and includes an interior rubber mat and
mounting hardware. Large enough to store most fullfaced helmets. Mounts using Detachable Tour-Pak
Mounting Rack P/N 53066-00A (sold separately).
Fits ’00-later Softail models (except FXSTD models)
equipped with Detachable Tour-Pak Rack P/N 5306600A. (Will not fit with Tour-Pak Rack P/N 53066-00.)
Compatible with hard saddlebags and Original
Equipment Heritage Classic and Heritage Springer
saddlebags. (Not for use with other leather or vinyl
saddlebags.) HDI models require the use of Licence
Plate Relocation Kit P/N 60095-00.
53884-03BDT Matches ’03
Gunmetal Pearl models.
53884-03BDP Matches ’03
Sterling Silver models.
53884-01XE Matches ’01-later
Luxury Blue models.
53884-01XF Matches ’01-’02
Jade Sunglo models.
53884-01XG Matches ’01-’02
Real Teal models.
53884-01DH Matches ’00-later
Vivid Black models.
53884-01QH Matches ’00-’02
Concord Purple models.
53884-01ZQ Matches ’01-later
Luxury Rich Red models.
53884-01ZL Matches ’00-’02
Diamond Ice Pearl models.
53884-01NV Matches ’00
Aztec Orange models.
53884-01NR Matches ’00
Sinister Blue models.
53884-01KB Matches ’00-’02
Suede Green models.
53884-01QB Matches ’00-’01
Chrome Yellow models.
53884-01QC Matches ’00-’01
Bronze Pearl models.
53884-02ZB Matches ’00-later
White Pearl models.
53884-02BBP Matches ’02
Impact Blue models.
53884-02BBN Matches ’02
Real Red models.
A. TOUR-PAK FOR HERITAGE SOFTAIL CLASSIC MODELS
$609.95
$664.95
$609.95
$609.95
$609.95
$609.95
$609.95
$609.95
$609.95
$609.95
$609.95
$609.95
$609.95
$609.95
$609.95
$609.95
$609.95
Shown with:
PASSENGER BACKREST PAD
FOR SPORT TOUR-PAK
This Sport Tour-Pak Backrest Pad is styled to
complement a wide variety of Original Equipment or
custom seats, and provides comfortable support for
your passenger.
52872-01
Fits models equipped with Sport
Tour-Pak P/N 53884-0XXX.
$89.95
B. SPORT TOUR-PAK
14287
VSA Partners
Harley-Davidson
Page 269
Price Non-Price Common
269
Softail
Sissy Bar Bags
continued from previous page
Shown with:
DETACHABLE TOUR-PAK RACK*
Designed to be installed and removed in less than 60
seconds, this Tour-Pak Rack makes the convenience
and protection of leather an easy on/off proposition.
The ultimate accessory in touring flexibility, this rack
is designed to work with Tour-Pak for Heritage Softail
Classic P/N 53151-00 and Sport Tour-Pak P/N
53884-0XXX.
53066-00A Fits ’00-later Softail models (does
not fit FXSTD). Specifically designed for FLSTC models
(requires Docking Hardware Kit P/N 53822-00). Other
Softail models refer to the Detachable Docking
Hardware chart for ’00-later model year.
$184.95
C. LEATHER SISSY BAR BAG
WITH BAR & SHIELD CONCHO
C. LEATHER SISSY BAR BAG WITH
BAR & SHIELD CONCHO
D. LEATHER SISSY BAR BAG WITH HERITAGE
SPRINGER BASKETWEAVE PATTERN
AND BLACK TRIM
This Sissy Bar Bag is an easy way to add extra storage. High quality moulded-leather construction holds
its shape and is a convenient place to store quickaccess items. Features a turnbuckle closure for a snug
fit and a die-cast Bar & Shield concho with extra style.
52997-98
Fits most Harley-Davidson Sissy Bar
Uprights (see chart). Will not fit with SAC
Luggage Rack Bags.
$81.95
D. LEATHER SISSY BAR BAG WITH
HERITAGE SPRINGER BASKETWEAVE
PATTERN AND BLACK TRIM
Inspired by Heritage Springer styling, this bag features
a rich basketweave pattern, black trim, and is a great
addition to any bike. High quality moulded-leather construction holds its shape and provides a convenient
place to store quick-access items. Features a chrome
turnbuckle closure for a snug fit.
51903-98
Fits most Harley-Davidson Sissy Bar
Uprights (see chart). Will not fit
with SAC Luggage Rack Bags. $81.95
E. LEATHER SISSY BAR BAG
WITH CHROME STUDS
This Sissy Bar Bag is an easy way to add extra storage. High quality moulded-leather construction holds
its shape and is a convenient place to store quickaccess items. Features a turnbuckle closure for a
snug fit and a concho for extra style.
52998-98
E. LEATHER SISSY BAR BAG
WITH CHROME STUDS
F. UNIVERSAL LUGGAGE RACK BAG
F. UNIVERSAL LUGGAGE RACK BAG
This versatile bag is water-resistant, foam-backed
cordura material that holds its shape and is easy to
install. Features embroidered “Harley-Davidson”
script logo and quick-release buckle.
98868-98
SISSY BAR BAG FITMENT MATRIX
FITMENT
SOFTAIL
Low/Tall Sissy Bar Upright
and Pad only
Low/Tall Sissy Bar Upright, Pad
and 4-Channel Rack (56465-86A)
Low/Tall Sissy Bar Upright, Pad
and 3-Channel Rack (53465-87B)
Low/Tall Sissy Bar Upright,
Pad and Bobtail Rack
Low/Tall Sissy Bar Upright,
Pad and Sport Rack (53862-00)
Low/Tall Sissy Bar Upright,
Pad and Sport Rack (53711-96A)
Low/Tall Sissy Bar Upright,
Pad and Sport Rack (53899-02)
Low/Tall Sissy Bar Upright,
Pad and Sport Rack (53547-91)
Low/Tall Sissy Bar Upright,
Pad and Sport Rack (56467-88A)
Low/Tall Sissy Bar Upright, Pad
and 2-up Sport Rack
Low Sissy Bar Upright, Pad
and Mini Rack (52775-71)
Tall Sissy Bar Upright, Pad
and Mini Rack (52775-71)
G. HERITAGE LEATHER TOURING BAG
DYNA
Fits most Harley-Davidson Sissy Bar
Uprights (see chart). Will not fit
with SAC Luggage Rack Bags. $81.95
SPORTSTER
Yes
Yes
Yes
Yes
No
No
Yes
No
No
Yes
Yes
No
Yes
No
No
No
Yes
Yes
No
Yes
No
No
Yes
No
No
No
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
NOTE: Sissy Bar Bag will not work with Mini Rail Sissy
Bar Upright, Short Rail Sissy Bar Upright, VRSC Upright
or FXSTD Upright.
Fits Softail (except FXSTD), FXDWG
models equipped with H-D Bobtail
fender racks or XL models equipped
with 4-channel luggage racks.
$89.95
Bobtail Fender Rack Duffel Bag (not shown)
Constructed of durable vinyl and nylon, this bag features a convenient carrying handle and chrome tiedown D-rings on each side.
98835-92
Fits Softail (except FXSTD),
FXDWG models equipped with H-D Bobtail fender
racks or XL models equipped with 4-channel
chrome luggage racks.
$79.95
G. HERITAGE LEATHER TOURING BAG
Styled to match the FLSTC, the bag features chrome
spots, buckles, and heavy-duty, wide leather straps.
With quick disconnect clips for easy removal and 720
cubic inches of storage space, this bag is as convenient as it is cavernous.
98864-97
Fits on all Softail models
equipped with Luggage Rack P/Ns 53465-87B,
56465-86A or 53713-96.
$295.00
1
*WARNING: Do not use this rack as a seat. Do
not exceed the fender rack weight capacity.
Using as seat or exceeding this capacity could
cause handling problems which could result in
loss of control and death or serious injury.
14287
VSA Partners
Harley-Davidson
Page 270
Price Non-Price Common
270
Softail
SAC Rack Bags
A. SAC RACK BAGS FOR SOFTAIL DEUCE
The perfect accessory for cruising around town or taking short trips on your Softail Deuce. Constructed with
a polyethylene liner to keep out water and help it
retain its shape, this bag carries like a suitcase for
your convenience. Custom designed to fit the Softail
Deuce Passenger Upright and Rack. 14.0" wide by
10.0" deep by 11.0" tall, the bag features side pockets for easy access.
Leather
98882-00
98871-00
Nylon
98881-00
98870-00
Fits ’00-later FXSTD models equipped
with Passenger Sissy Bar Upright
P/N 51114-00 and Luggage Rack
P/N 53806-00 and Passenger Backrest
Pad P/N 52050-00.
$259.95
Fits ’00-later FXSTD models equipped
with Passenger Sissy Bar Upright P/N
51114-00 and Luggage Rack
P/N 53806-00 and Passenger Backrest
Pads P/N 52549-00 or 51534-00.95
Fits ’00-later FXSTD models equipped
with Passenger Sissy Bar Upright
P/N 51114-00 and Luggage Rack
P/N 53806-00, and Passenger\Backrest
Pad P/N 52050-00.
$139.95
Fits ’00-later FXSTD models equipped
with Passenger Sissy Bar Upright P/N
51114-00 and Luggage Rack
P/N 53806-00, and Passenger
Backrest P/Ns 52549-00 and 51534-00.
B. SLIM SAC BAG FOR BACKREST PADS
A handy place to store small items like wallets, cell
phones, glasses, PDAs, and pagers. These compact
bags zip open for easy access and slip over your
backrest for quick installation. Easily removed for
carry-along convenience. Sized to fit your backrest
pad, Slim SAC bags can be installed with or without
luggage racks.
94803-02
94849-02
94850-02
Small Backrest.
Fits ’00-later FXSTD models
equipped with Backrest Pad
P/N 51534-00.
Medium Backrest.
Fits ’00-later FXSTD models
equipped with Backrest Pad
P/N 52549-00.
Touring Backrest.
Fits ’00-later FXSTD models
equipped with Backrest Pad
P/N 52050-00.
A. SAC RACK BAG FOR SOFTAIL DEUCE
NEW
$89.95
$89.95
$99.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. SLIM SAC BAG FOR BACKREST PADS
14287
VSA Partners
Harley-Davidson
Page 271
Price Non-Price Common
271
Softail
Windshield Bags
C. LEATHER WINDSHIELD BAG
WITH BAR & SHIELD LOGO
Extra storage. Extra style. Extra miles.
Accented with decorative chrome studs and an
embossed Bar & Shield logo. Easy to install on models equipped with King-Size windshields.
58298-87
Matches FLSTC models.
Does not fit with 100th Anniversary
Logo Accessory Windshields.
$65.95
D. HERITAGE SPRINGER LEATHER
WINDSHIELD BAG – BLACK TRIM
Convenience with Heritage Springer styling. Easy to
install.
52931-99
C. LEATHER WINDSHIELD BAG
WITH BAR & SHIELD LOGO
D. HERITAGE SPRINGER LEATHER
WINDSHIELD BAG
Fits all H-D King-Size and Compact
Windshields (except FXSTD) on models
without handlebar-mounted gauges.
Does not fit with 100th Anniversary
Logo Accessory Windshields.
$79.95
E. FAT BOY WINDSHIELD BAG
WITH DIE-CAST CONCHO
With a Fat Boy logo concho and a leather laced lid, this
bag provides classic Fat Boy style and convenient storage. It’s the ideal accessory for Fat Boy Saddlebags
P/N 90381-98, 91536-00A and 90320-00B.
56626-99
Fits all ’84-later Softail models
equipped with H-D King-Size and
Compact Windshields without
handlebar rise-mounted gauges.
Does not fit with 100th Anniversary
Logo Accessory Windshields.
$79.95
F. FAT BOY WINDSHIELD BAG
This windshield bag, designed to match the Fat Boy
seat and tank panel, is made of black U.S.
steerhide. Features an embossed Fat Boy logo and a
hand-laced leather lid.
58307-95
Fits FLSTF, FLSTC, FLSTN,
FLH and FLHR models equipped
with H-D King-Size Windshields.
Does not fit with 100th Anniversary
Logo Accessory Windshields.
$64.95
G. WINDSHIELD BAG WITH
LEATHER EMBOSSED LOGO
The perfect accessory for small items such as keys,
sunglasses and cell phones, this windshield bag
includes a moulded shell with an embossed Bar &
Shield logo. An apache leather flap wraps snugly
around the shell to help keep contents dry and safe.
56629-00
E. FAT BOY WINDSHIELD BAG
WITH DIE-CAST CONCHO
F. FAT BOY WINDSHIELD BAG
Fits models equipped
with H-D Compact or King-Size
Windshield Kits without
handlebar-mounted gauges.
Does not fit with 100th Anniversary
Logo Accessory Windshields.
$59.95
H. SOFTAIL CUSTOM/DYNA
WIDE GLIDE LEATHER FORK BAG
Sized to fit models with wide forks. Features embroidered Bar & Shield logo and full-length Velcro closure
over zipper. The inside is plushly lined.
91782-95
G. WINDSHIELD BAG WITH LEATHER
EMBOSSED LOGO
H. SOFTAIL CUSTOM/DYNA WIDE
GLIDE LEATHER FORK BAG
Fits ’84-later FXST Softail
models (except Springer
models and FXSTD) and
’93-later Dyna Wide Glide
models. (Does not fit with Engine
Guard P/N 49016-72D.)
$54.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 272
Price Non-Price Common
272
Softail
Dash Panel and Tank Bras
A. CHROME DASH PANEL EXTENSION
FOR SOFTAIL MODELS
Stretch the lines of your chrome dash panel the full
length of the fuel tank. This chrome plated trim kit
continues the lines and finishes of your standard tank
panel to the front of the seat, adding a custom touch
without the expense of a custom tank. From the workshop of Wyatt Fuller.
71283-01
Fits ’00-later Softail models
(except FXSTD models).
$39.95
B. TANK BRA FOR
SOFTAIL DEUCE MODELS
Protect your fuel tank from scratches caused by keys,
belt buckles and road debris. This tank bra is made
with non-abrasive, fleece backed vinyl and features an
embroidered Bar & Shield logo. You get easy installation and a custom fit without having to remove the
tank or seat.
61939-01
Fits ’00-later FXSTD models.
$24.95
C. TANK BRA
This tank bra is made with non-abrasive, fleece
backed vinyl material and features an embroidered
Bar & Shield logo. It protects your fuel tank from
scratches from keys, belt buckles and other objects.
Designed for easy installation and a custom fit without
disassembly of the tank or seat.
57799-00
Fits ’00-later Softail models
(except FXSTD) and ’93-later
FXDWG models.
$24.95
A. CHROME DASH PANEL EXTENSION FOR SOFTAIL MODELS
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. TANK BRA FOR SOFTAIL DEUCE MODELS
C. TANK BRA
14287
VSA Partners
Harley-Davidson
Page 273
Price Non-Price
273
Softail
Tank Panels
D. LEATHER TANK PANEL
WITH FAT BOY CONCHO
Give your Softail additional attitude with this leather
tank panel featuring an authentic Fat Boy concho.
91134-01
Fits ’00-later Softail models
(except FXSTD) and ’93-later
FXDWG models.
$47.95
E. LEATHER TANK PANEL
WITH CHROME SPOTS
Replace your Original Equipment tank strip with this
leather panel, spotted in shimmering chrome. The
chrome spots and concho are styled to match your
Heritage Softail Classic.
91129-01
Fits ’00-later Softail models
(except FXSTD) and ’93-later
FXDWG models.
$47.95
F. TEXTURED LEATHER TANK PANEL
Complete the look with this textured insert that
matches Softail Two-Up Custom Seat P/N 52850-97.
D. LEATHER TANK PANEL
WITH FAT BOY CONCHO
E. LEATHER TANK PANEL WITH CHROME SPOTS
61506-97
Fits ’90-’99 Softail models.
$49.95
G. LEATHER TANK PANEL
WITH EMBOSSED SKULL LOGO
Add a little menace to your bike with this skullembossed leather tank panel.
91001-01
Fits ’00-later Softail models
(except FXSTD) and ’93-later
FXDWG models.
$39.95
H. ALLIGATOR TANK PANEL
FOR SOFTAIL MODELS
Bring the bayou to your bike with this genuine
alligator tank panel. (Available in U.S. only.)
61060-01
Fits ’00-later Softail
models (except FXSTD).
$139.95
NOTE: Alligator is a natural material. Scale pattern
may vary, this should not be considered a defect.
I. HARLEY-DAVIDSON
DASHINATOR COLLECTION
As a rider there is probably no part of your bike you
see more than your dash and tank console. Thanks to
our Dashinator Collection, it’s also the easiest part of
your bike to change. Dashinator dash and tank consoles come in a stylish assortment of textured metal,
full-grain cowhide and custom RoadShades colours,
that blend with the latest Motor Company paint
schemes. Available only from Harley-Davidson.
F. TEXTURED LEATHER TANK PANEL
H. ALLIGATOR TANK PANEL
FOR SOFTAIL MODELS
G. LEATHER TANK PANEL
WITH EMBOSSED SKULL LOGO
I. HARLEY-DAVIDSON
DASHINATOR COLLECTION
Refer to the Multi-Fit section
for a complete listing of Dashinator
Collection colour options.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 274
Price Non-Price
274
Softail
Tank Panels with Pouches
A. LEATHER TANK PANEL WITH
POUCH AND BAR & SHIELD CONCHO
Matches Diamond Back Collection.
91187-97
Fits ’84-’99 Softail models.
$69.95
B. LEATHER TANK PANEL WITH POUCH,
HERITAGE SPRINGER BASKETWEAVE
PATTERN AND BLACK TRIM
Featuring the Heritage Springer basketweave pattern
and black trim, this panel puts a convenient storage
pouch right in front of you. Its nostalgic styling and
sturdy leather construction are a great addition to any
Softail. The pouch is for extra storage. The basketweave
is for extra style and matches the Original Equipment
pattern and trim of stock Heritage Springer models.
Fits ’93-later FXDWG, ’00-later Softail models (except
FXSTD).
61770-00
With Black Trim.
$72.95
C. LEATHER TANK PANEL WITH POUCH,
CONCHO AND BRAIDED FLAP
91408-00
Fits ’93-later FXDWG and ’00-later
Softail models (except FXSTD). $69.95
91173-97
Fits ’84-’99 Softail models.
$69.95
A. LEATHER TANK PANEL WITH POUCH
AND BAR & SHIELD CONCHO
B. LEATHER TANK PANEL WITH POUCH,
HERITAGE SPRINGER BASKETWEAVE
PATTERN AND BLACK TRIM
C. LEATHER TANK PANEL WITH POUCH,
CONCHO AND BRAIDED FLAP
D. LEATHER TANK PANEL WITH
POUCH AND BRAIDED TRIM
E. LEATHER TANK PANEL WITH
POUCH AND STUDS
F. LEATHER TANK PANEL WITH POUCH,
CONCHO AND CHROME STUDS
D. LEATHER TANK PANEL
WITH POUCH AND BRAIDED TRIM
This decorative, yet durable, leather panel has an integrated storage pouch, perfect for those small items
you like to keep handy. Constructed of tough steerhide over a rigid, moulded base and decorated with
H-D concho and braided leather lacing.
91409-00
91026-94A
Fits ’93-later FXDWG and ’00-later
Softail models (except FXSTD). $69.95
Fits ’84-’99 Softail models.
$69.95
E. LEATHER TANK PANEL
WITH POUCH AND STUDS
Decorate your tank with this durable leather panel that
has an integrated storage pouch perfect for those
small items you like to keep handy. Constructed of
tough steerhide over a rigid, moulded base and decorated with H-D concho and bright studs.
91022-94A
Fits all ’84-’99 Softail models.
$69.95
F. LEATHER TANK PANEL WITH POUCH,
CONCHO AND CHROME STUDS
Matches Dashinator Collection.
91407-00
91177-97
Fits ’93-later FXDWG and ’00-later
Softail models (except FXSTD). $69.95
Fits ’84-’99 Softail models.
$69.95
G. LICENCE PLATE BAG
The perfect accessory for storing small items, this bag
mounts quickly to the licence plate bracket of your
motorcycle. A zippered pocket and embroidered
“Harley-Davidson” logo add the finishing touch.
64267-00
Fits XL, Dyna, and Softail models
without Bobtail fenders or luggage
racks. (Does not fit with Layback
Licence Plate Mounting Kit
P/Ns 59817-00A or 59822-00.) $49.95
H. FAT BOY LEATHER TOOLBOX
Braided leather valance, chrome eyelets and Fat Boy
styling with the convenience and durability of leather
construction.
Left Side
64219-96
Fits ’84-later Softail models (except
FLSTC, FLSTS and FXSTD models or
models equipped with Harley-Davidson
Dual Fishtail Exhaust System P/N 6528192B or Dual Exhaust P/N 65281-96).
’00-later Softail models require use of
footboards or Footpeg Extension Kit P/N
49352-00. (Will not fit with FLSTC
and FLSTS or saddlebags.)
$104.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 275
Price Non-Price
275
Softail
Chrome and Leather Tool Boxes
I. SOFTAIL LEATHER TOOL BOX
Decorated with embossed Bar & Shield logo, this custom leather tool box features a top-mounted zipper
that provides easy access and a full-length Velcro
secured leather cover. It is manufactured from durable,
full grain, U.S. black steerhide that is stitched to a highdensity moulded back for long-lasting structural durability and shape retention. All necessary mounting
hardware included.
64260-00
Right side. (shown)
Fits ’00-later Softail models (except FLSTC,
FLSTS and FXSTD). Requires Spacer Kit
P/N 49352-00 if used with passenger footpegs.
Not required for Passenger Footboards.
$99.95
Left side.
64262-00
Fits ’84-later Softail models (except FLSTC,
FLSTS and FXSTD). Fits ’00-later Softail models
(except FLSTC, FLSTS and FXSTD). Requires Spacer
Kit P/N 49352-00 if used with passenger footpegs.
Not required for Passenger Footboards.
$99.95
J. SOFTAIL AIR DAM TOOLBOX
G. LICENCE PLATE BAG
H. FAT BOY LEATHER TOOLBOX – LEFT SIDE
This functional chrome-plated toolbox fits between
the frame tubes on Softail models. The removable lid
provides inconspicuous storage space for tools.
91530-98
Fits ’92-’99 Softail models.
(Does not fit FXSTC/FXSTS models equipped with
Engine Guard P/N 49016-72D or FXSTC/FXSTS
models with Engine Guard P/N 49004-90 and
Extended Reach Forward Control Kit P/N 49163-91.)
(Does not fit FXSTD.)
$79.95
K. SOFTAIL CHROME TOOLBOXES
Includes chrome-plated mounting brackets and
barrel-style locks with keys. (Does not fit Softail models
equipped with Dual Fishtail Exhaust System P/N
65281-92B or P/N 65281-96.)
I. SOFTAIL LEATHER TOOL BOX
J. SOFTAIL AIR DAM TOOLBOX
64938-00
Left Side.
Fits ’00-later FLSTF, FXST, FXSTB and FXSTS models.
Requires Spacer Kit P/N 49352-00 if used with Original
Equipment passenger footpegs. Not required with
Passenger Footboards P/N 50602-00.
$87.95
Right Side.
64937-00
Fits ’00-later FXST, FXSTB, FXSTS, FLSTC and FLSTS
models. Requires Spacer Kit P/N 49352-00 if used with
Original Equipment passenger footpegs. Not required
with Passenger Footboards P/Ns 50955-00 and 5060200. ’00-later FLSTC models require Saddlebag
Relocation Kit P/N 90238-00 with Original
Equipment footpegs or footboards.
$87.95
Right side.
64215-97
Fits ’97-’99 FLSTS models.
$87.95
64207-89B Left Side.
Fits all ’84-’99 Softail models including ’90-later
FLSTC/FLSTN models. (Does not fit FLSTS.)
(Will not work with Dual Fishtail Exhaust
P/N 65281-92B or Dual Exhaust P/N 65281-96.)
Replacement Key P/N 64204-96.
$87.95
64201-85C Right Side.
Fits ’84-’99 Softail models (except FLSTF, FLSTN
and FLSTS models.) This right side toolbox will work
with Dual Fishtail Exhaust. (’90-later FLSTC models
require Toolbox Relocation Kit P/N 64210-90A.)
Replacement Key P/N 64204-96.
$87.95
Hex Spacer kit (not shown)
This kit is specifically required for Toolbox P/Ns
64937-00, 64938-00 or 64219-96 when used with
passenger footpegs. Not required with Passenger
Footboard P/Ns 50955-00 and 50602-00.
49352-00
$9.95
NOTE: Replacement lock for Softail Chrome
Toolboxes P/N 45797-99.
L. SOFTAIL TOOLBOX LINER
Made of tough 1000 denier nylon with silk-screened
Bar & Shield logo. Features a full-length zipper and
two elastic straps to secure several tools.
91838-92
K. SOFTAIL CHROME TOOLBOXES
L. SOFTAIL TOOLBOX LINER
Fits both left and
right side toolboxes.
$16.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 276
Price Non-Price
276
Softail
Mud Flaps and Soft Lowers
A. STUDDED REAR FENDER MUD FLAP
Black mud flap with accenting decorative studs.
59230-88
Fits FLST, FLSTF, FLSTN, FLHT, FLHS,
FLHR, FLT, FLHT and ’98-later FLTR
models. (Does not fit models with
Rear Bumper Rail.)
$19.95
B. HERITAGE SOFTAIL CLASSIC
REAR FENDER LEATHER MUD FLAP
Get nostalgic with top-grain cowhide decorated with
bright spots and a Heritage-style concho. A perfect
match with your Heritage saddlebags. Kit includes
installation hardware and template.
59071-98
Fits all FLSTC models.
$49.95
C. FAT BOY REAR FENDER MUD FLAP
Top grain cowhide is decorated with a Fat Boy textured imprint and lacing that perfectly matches your
Fat Boy seat and Fat Boy accessories. Kit includes
hardware, instructions and installation template.
59707-98
Fits all FLSTF models,
rear fender only. (Does not fit
with H-D Fat Boy rear
fender tip trim pieces.)
A. STUDDED REAR FENDER MUD FLAP
B. HERITAGE SOFTAIL CLASSIC
REAR FENDER LEATHER MUD FLAP
C. FAT BOY REAR FENDER MUD FLAP
D. EAGLE WING MUD FLAP
E. HERITAGE SPRINGER LEATHER MUD FLAP
WITH FRINGE WITH BLACK TRIM
F. BAR & SHIELD LOGO SOFT LOWERS
$49.95
D. EAGLE WING MUD FLAP
The two-colour eagle wing logo is moulded on sturdy
black rubber. Includes mounting hardware.
59331-96
Fits FLSTC and FLSTN models. $16.95
E. HERITAGE SPRINGER LEATHER
MUD FLAP WITH FRINGE AND BLACK TRIM
Made from premium, plated leather with black trim,
these flaps have fringe and an FLSTS concho and
black trim. Includes chrome hardware, support
bracket and fender mounting template.
Fits ’97-later FLSTS models front or rear fender. Also
fits ’86-later FLSTC, FLSTN and FLSTF models, rear
fender only.
59027-99
With Black Trim.
$49.95
F. BAR & SHIELD LOGO SOFT LOWERS
Sturdy front engine guard soft lowers feature a durable
quick release buckle attachment for added convenience.
58562-96
Fits ’86-’01 FL Softail models
equipped with Engine Guard
P/Ns 49004-90 or 49004-00.
(Cannot be used with Extended
Reach Brake Pedal Kits
P/N 42676-02 and 42640-03.)
$59.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 277
Price Non-Price
277
Softail
Seat Covers
G. TWO-UP SEAT RAIN COVER*
Featuring a handy storage sack, this black nylon,
water-resistant, cordura cover packs easily and
shelters your seat from the storm.
51637-97
Fits all H-D Two-Up Seats
(except FLSTS and Softail Seats
with Rider Backrests).
$29.95
H. SOLO SEAT RAIN COVER*
Featuring a handy storage sack, this black nylon,
water-resistant, cordura cover packs easily and
shelters your seat from the storm.
51638-97
Fits all H-D solo seats
(except FLSTS).
$29.95
I. TOURING SEAT RAIN COVER*
Featuring a handy storage sack, this black nylon,
water-resistant, cordura cover packs easily and
shelters your seat from the storm.
51639-97
Fits all FLSTS and H-D touring
seats without rider backrest.
$29.95
G. TWO-UP SEAT RAIN COVER
1
H. SOLO SEAT RAIN COVER
I. TOURING SEAT RAIN COVER
*WARNING: Do not use while riding; could
result in death or serious injury.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 278
Price Non-Price
278
Softail
Front Spoilers
A. SOFTAIL COLOUR-MATCHED
FRONT SPOILER
This colour-matched front spoiler is made from injection-moulded, high impact composite materials and
styled for a racy, custom appearance. Finished with
the same high quality paint as all stock HarleyDavidson products to match your original factory
applied colour. Also available primed, ready for your
custom paint design. Includes the necessary hardware
for quick and easy installation.
Refer to the Colour Shop section for
a complete listing of colour options
and additional fitment information.
B. BULLET FRONT SPOILER
Add a long, lean, and stretched look without modifying
the frame. The deep chin spoiler flows into side rails
that cover the frame tubes all the way back to the
swingarm. The colour-matched combination adds visual length to the bike, covers frame hardware, and creates a moulded frame effect. Easy to install, this kit contains all necessary mounting hardware.
Fits ’01-later FXST, FXSTS, FXSTB, and FXSTD models.
57039-03BDK Primed.
$254.95
57039-03BDT Matches ’03 Gunmetal Pearl
FXST, FXSTS, FXSTB,
FXSTD models.
$354.95
57039-03BDP Matches ’03 Sterling Silver
FXST, FXSTS, FXSTB,
FXSTD models.
$384.95
57039-03BBN Matches ’02 Real Red
FXSTD models.
$354.95
57039-03XE Matches ’01-’03 Luxury Blue
FXST, FXSTS, FXSTB,
FXSTD models.
$354.95
57039-03XG Matches ’01-’02 Real Teal
FXST, FXSTS, FXSTB,
FXSTD models.
$354.95
57039-03DH Matches ’01-later Vivid Black
FXST, FXSTS, FXSTB,
FXSTD models.
$354.95
57039-03ZQ Matches ’01-’03 Luxury
Rich Red FXST, FXSTS,
FXSTB, FXSTD models.
$354.95
57039-03ZL Matches ’01 Diamond Ice
Pearl FXST, FXSTS, FXSTB,
FXSTD models.
$354.95
57039-03QH Matches ’01-’02 Concord
Purple FXST, FXSTS, FXSTB,
FXSTD models.
$354.95
57039-03ZB Matches ’01-’03 White Pearl
FXST, FXSTS, FXSTB,
FXSTD models.
$354.95
57039-03XF Matches ’01-’02 Jade Sunglo
FXST, FXSTS, FXSTB models. $354.95
57039-03BBP Matches ’02 Impact Blue FXST,
FXSTS, FXSTB models.
$354.95
57039-03QC Matches ’01 Bronze Pearl
FXST, FXSTS, FXSTB and
FXSTD models.
$354.95
A. SOFTAIL COLOUR-MATCHED FRONT SPOILER
NEW
B. BULLET FRONT SPOILER
C. SOFTAIL CHROME FRONT SPOILER
This spoiler is manufactured from injection-moulded,
high impact materials, and finished with a bright,
mirror polished chrome. The kit includes all hardware
for installation.
57101-01
57083-01
57085-01
Fits ’01-later Softail models. Fits with
all Engine Guards. Will not fit with
Chrome Voltage Regulator Cover.
Fits ’00 Softail models. Fits with all
Engine Guards. Will not fit with Chrome
Voltage Regulator Cover.
$184.95
Fits ’93-’99 Softail models. Fits with
Chrome Voltage Regulator Cover
P/N 74578-97. Fits FLSTC, FLSTF,
FLSTN and FLSTS models with Engine
Guard P/N 49004-90. Will not fit FXST,
FXSTC, FXSTB, FXSTS or FXSTSB
models equipped with Engine Guard
P/N 49016-72D, or Engine Guard P/N
49004-90 and Adaptor Bracket P/N
49164-93, or Extended Reach Forward
Control Kit P/N 49163-91.
$174.95
C. SOFTAIL CHROME FRONT SPOILER
14287
VSA Partners
Harley-Davidson
Page 279
Price Non-Price
279
Softail
Engine Kits
D. CHROME ENGINE KIT FOR
TWIN CAM 88B-EQUIPPED
SOFTAIL MODELS
Upgrade your silver-polished motor with the brilliance
of chrome. Kit includes the rocker housings and rocker covers, tappet cover, dipstick, transmission top and
side cover, outer primary, derby cover, coil cover, cam
cover and all necessary gaskets.
16318-01A
Fits ’01-later Softail models.
$899.95
E. BLACK ENGINE KIT FOR
TWIN CAM 88B-EQUIPPED SOFTAIL MODELS
Black is indisputably among the favourite HarleyDavidson colours, making it an ideal place to start
customising your ride. These black powder-coated
engine covers are an easy way to convert your
engine to a striking black wrinkle finish. Kit includes
the rocker housing and rocker cover, transmission
top and side cover, inner and outer primary, derby
cover, inspection cover, coil cover, cam cover, air
cleaner cover, horn cover and all necessary gaskets.
16319-01A
Fits ’01-later Softail models.
$799.95
D. CHROME ENGINE KIT FOR TWIN CAM 88B-EQUIPPED SOFTAIL MODELS
E. BLACK ENGINE KIT FOR TWIN CAM 88B-EQUIPPED SOFTAIL MODELS
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 280
Price Non-Price
280
Softail
Chrome Covers
A. CHROME INNER PRIMARY COVER
Because all components in this cover are exactly like
the Original Equipment part, you can be sure this
cover will match your outer cover, right down to the
high quality, hexavalent chrome-plating. It completes
the look of your powertrain without the hassle of troublesome exchange programs. This cover includes all
bearings, dowel pins and seals already installed, to
ensure Harley-Davidson quality.
60639-00
Fits all ’94-later Softail models. $249.95
B. OIL FILTER COVER KIT
Chrome cover conceals the oil filter and filter mount
for a finished look. The cover is removable for
service, and the chrome-plated stainless steel hardware prevents corrosion. Custom slots in the cover
allow cooling air-flow around the oil filter, while the
side profile of the cover is dressed with an engraved
Bar & Shield logo for a custom touch. From the workshop of Wyatt Fuller.
62448-01
Fits ’00-later Softail models.
Does not fit with Premium Oil
Cooler P/N 62913-00.
Does not fit with Cylinder Base Covers.
C. EFI FUEL FITTING COVER
This chrome-plated billet aluminium cover is contoured to conceal the fuel tank fittings on your fuel
injected Harley. The milled Bar & Shield logo enhances
the appearance, and the clean, simple installation
shows your attention to every detail. Kit includes
mounting hardware. From the workshop of Wyatt
Fuller.
62883-02
Fits ’02-later fuel injected
Softail and ’00-’01 fuel injected
Touring models.
$36.95
A. CHROME INNER PRIMARY COVER
NEW
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. OIL FILTER COVER KIT
NEW
C. EFI FUEL FITTING COVER
14287
VSA Partners
Harley-Davidson
Page 281
Price Non-Price
281
Softail
Oil Gauge and Braided Lines
D. BRAIDED OIL LINES
The ultimate custom replacement for the already
uniquely exposed oil lines of the Twin Cam 88 for
Softail. Engineered specifically for the Twin Cam 88B
Softail powertrain, these lines include chrome-plated
fittings, O-rings and clips.
63860-00
Fits all ’00-later Softail models. $169.95
E. CHROME ROCKER BOX BOLT COVERS
Matching the styling of our classic chrome headbolt
covers, these chrome-plated rocker box bolt covers
add chrome to your Twin Cam 88 engine. Easy to
install, the covers are held in place by spring steel clip.
Each engine has a total of twelve rocker box bolts, but
not all bolts are visible on all models, so the covers are
sold in packages of four.
43868-99
43943-01
Fits ’99-later Twin
Cam 88-equipped models.
Fits ’84-later XL
Evolution and Evolution
1340-equipped models.
$15.95
$16.95
F. OIL PRESSURE GAUGE KIT
Check your oil pressure at a glance with this oil-filled
pressure gauge kit, specifically designed to look
good, fit right, and perform properly on your Twin
Cam 88 equipped motorcycle. The custom mounting
brackets have been polished and chrome-plated to
rigid Harley-Davidson standards and the gauge offers
premium reliability. The kit includes all necessary
hardware and mounting brackets for quick and clean
installation.
75133-99
Fits all ’99-later Dyna
models,’00-later Softail models,
and ’99-later FLHT and
FLHR models.
$66.95
D. BRAIDED OIL LINES
E. CHROME ROCKER BOX BOLT COVERS
F. OIL PRESSURE GAUGE KIT
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 282
Price Non-Price
282
Softail
Oil Coolers
A. PREMIUM OIL COOLER
FOR SOFTAIL MODELS
This vertically mounted oil cooler was designed specifically for Harley-Davidson to out-perform the other
coolers in the industry. This cooler features a unique
“Turbulator” design that efficiently distributes oil
across the cooling chambers. The cooler features
several louvers to efficiently dissipate heat. The unique
and stylish adaptor plate incorporates the thermostat,
and simplifies oil line routing for easy installation.
Comes complete with mounting hardware.
62913-00
Fits ’00-later Softail models.
(Will not fit with Oil Filter
Cover P/N 62816-98. Will not
fit with front spoiler.)
INSIDE VIEW OF
PREMIUM OIL COOLER
WITH TURBULATORS
$279.95
INSIDE VIEW OF
CONVENTIONAL OIL COOLER
WITHOUT TURBULATORS
OIL FLOW
OIL FLOW
Cooling
Fins
HOT
OIL
Turbulators
(Inside cooler)
Turbulators disperse and mix
oil inside cooler to provide
more efficient cooling capabilities. The cooler oil is not
allowed to remain along the
boundaries of the flow tube
as in conventional coolers.
COOL
OIL
Coolers without the Turbulator
system allow oil to flow only in
a straight path. Oil does not
mix and the cooler oil remains
along the outer boundaries,
while the hotter oil remains
along the centre path of flow.
Without the mixing effects of
the Turbulators, the conventional oil cooler provides less
efficient cooling capabilities.
Oil Cooler Adapter Assembly (not shown)
This black anodized billet aluminium adapter eliminates the lengthy oil cooler lines required for most
aftermarket oil coolers. Standard in the H-D premium
oil cooler kit, this adapter mounts between the filter
mount and oil filter. Kit includes thermostat, gaskets,
hardware and fittings.
62882-00
Fits ’00-later Softail models
A. PREMIUM OIL COOLER FOR SOFTAIL MODELS
$24.95
B. SOFTAIL CHROME OIL COOLER COVER
Add a beautiful accent to your Softail premium Oil
Cooler. This chrome cover is designed to allow proper
air flow through the integrated duct work. Requires
Permatex clear silicon RTV adhesive for installation.
74624-01
Fits ’00-later Softail models
equipped with Premium Oil
Cooler P/N 62913-00.
$24.95
C. OIL DIPSTICKS
WITH TEMPERATURE GAUGES
62896-00
Fits ’00-later Softail models.
$29.95
62668-87T Fits ’84-’99 FXST and FLST models.
(Replaces P/N 62634-84.)
$27.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. PREMIUM OIL COOLER FOR SOFTAIL MODELS
AND SOFTAIL CHROME OIL COOLER COVER
C. OIL DIPSTICKS WITH
TEMPERATURE GAUGES
14287
VSA Partners
Harley-Davidson
Page 283
Price Non-Price
283
Softail
Dipsticks and Engine Trim
D. LCD OIL TEMPERATURE DIPSTICK
Add function and style by replacing your stock
dipstick with this hardworking version, which includes a
beautiful chrome cap and LCD (liquid crystal display) oil
temperature read-out. The read-out is push button
operated with an automatic shut-off in five seconds and
operates within plus or minus one degree. Designed
also to stay on up to 15 minutes if desired. Fahrenheit
or Celsius can be changed with a simple push button
operation. The read-out is displayed with a rare blue
light background for easier operation at night. All LCD
dipsticks now incorporate an updated and more heat
resistant LCD electronic unit. Twin Cam 88 LCD
dipsticks also include an improved twist and pull
cam-lock removal feature. Designed to be waterproof
with replaceable standard battery. Patented.
62970-02
Fits ’00-later Softail models.
$89.95
E. H-D MOTOR CO. OIL DIPSTICKS
This collection personifies Harley style. It had better,
because we put our name on it – The Harley-Davidson
Motor Co. Collection.
Fits ’00-later Softail models.
D. LCD OIL TEMPERATURE DIPSTICK
62345-00
62346-00
Chrome.
Satin Chrome.
Fits ’84-’99 Softail models.
62736-96A Chrome.
$12.95
$12.95
$11.95
F. BAR & SHIELD OIL DIPSTICK
Add a touch of style with this chrome dipstick.
Finished with a classic Bar & Shield Logo.
62399-01
Fits ’00-later Softail models.
$14.95
G. CHROME HEADBOLT BRIDGE
This exclusive Headbolt Bridge covers both the headbolts and spark plug with a splash of chrome and an
engraved Bar & Shield emblem. Easy to install with
unique headbolt mounts. Kit includes all necessary
mounting hardware.
43858-00
Fits ’99-later Twin Cam 88-equipped
models. (Not to be used on models
equipped with fairing lowers.)
$45.95
H. CHROME BILLET
ALUMINIUM LIFTER COVERS
E. H-D MOTOR CO. OIL DIPSTICK
F. BAR & SHIELD OIL DIPSTICK
Manufactured from billet aluminium and polished and
plated for a rich look, these Chrome Billet Aluminium
Lifter Covers add a custom look to Twin Cam 88equipped models. Unique styling matches H-D
Chrome Pushrod Cover Kit, and fits with stock or
Screamin’ Eagle Quick-Install Pushrods. Kit includes
chrome mounting hardware and gaskets to complete
the installation.
18088-02
G. CHROME HEADBOLT BRIDGE
H. CHROME BILLET ALUMINIUM LIFTER COVERS
All ’99-later Twin Cam
88-equipped models.
$129.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 284
Price Non-Price
284
Softail
Chrome Covers
A. CHROME PUSHROD COVER KIT
These covers feature a unique look, curtesy of a special grooved design, and superior quality, thanks to a
crafted combination billet 6061-T6 aluminium, finished with copper, dual nickel and chrome-plating.
Can be used with Original Equipment pushrods or
Screamin’ Eagle Adjustable Pushrods.
18096-00A
Fits all ’99-later Twin Cam 88equipped models.
$174.95
B. LIFTER BLOCK COVER
Unlike other lifter block covers on the market, this
chrome-plated cover features a design that helps hide
the mounting hardware. With an embossed Bar &
Shield logo, this kit cleans up the lifter block area and
extends chrome from the gearcase cover to the lifter
tubes. Includes all mounting hardware and installation
tools. From the workshop of Wyatt Fuller.
18262-00
Fits ’00-later Twin Cam 88-equipped
Softail models. (Will not fit with
Engine/Transmission Interface
Top Cover P/N 66513-00.)
$59.95
A. CHROME PUSHROD COVER KIT
B. LIFTER BLOCK COVER
C. ENGINE TRANSMISSION
INTERFACE COVER
Featuring a ribbed design for sharp surface contrasts,
this chrome engine to transmission interface cover
provides a custom option to conceal the space
between the transmission, rear motor mount, and
gearcase cover. Includes mounting hardware and
bracket. Can be installed with or without complementing Top Cover P/N 66510-00.
66508-00
Fits ’00-later Softail models.
$59.95
D. ENGINE TRANSMISSION TOP COVER
This cover stylishly fills the top gap between the
engine and transmission, and complements the
styling of the Engine Transmission Interface Cover P/N
66508-00. Includes mounting hardware.
66510-00
Fits ’00-later Softail models.
(Requires separate purchase
of Engine Transmission
Interface Cover P/N 66508-00
for installation.)
$34.95
C. ENGINE TRANSMISSION INTERFACE COVER
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
D. ENGINE TRANSMISSION TOP COVER
14287
VSA Partners
Harley-Davidson
Page 285
Price Non-Price
285
Softail
Chrome Covers
E. CHROME VOLTAGE REGULATOR
We’ve taken the stock regulator and chromed it with
our superior hexavalent process. It fits and works
exactly like the stock part, but adds a custom shine to
an otherwise dark area.
74610-01
Fits all ’01-later Softail models. $127.95
F. CHROME VOLTAGE REGULATOR COVER
With a look that creates its own electricity, this
chrome-plated cover features an embossed Bar &
Shield and an open-centre grill that allows air to flow
right through for regulator cooling. Designed for easy
installation. Chrome mounting hardware included.
From the workshop of Wyatt Fuller.
74597-01
74582-00
74578-97
E. CHROME VOLTAGE REGULATOR
F. CHROME VOLTAGE REGULATOR COVER
Fits ’01-later Softail models.
(Will not fit with front spoilers.)
Fits ’00 Softail models.
(Will not fit with front spoiler.)
Fits ’89-’99 Softail models.
$34.95
$34.95
$34.95
G. BAR & SHIELD COIL COVER
Featuring a radical open-face design with a Bar & Shield
silhouette, this chrome coil cover matches Chrome
Voltage Regulator Cover P/Ns 74582-00 and 74578-97
for an integrated custom look. Includes all mounting
hardware. From the workshop of Wyatt Fuller.
74615-01
Fits ’00-later Softail
and ’99-later Dyna models.
(except models with EFI.)
$34.95
H. AIR WING HORN COVER
This exclusive Air Wing chrome-plated horn cover is
styled to complement the Harley-Davidson Billet
Air Cleaner Cover, and is a stylish replacement for
the Original Equipment horn cover. Mounts easily to
stock horn cover bracket. From the workshop of
Wyatt Fuller.
69167-02
Fits all ’93-later models with
side-mounted horn.
$45.95
I. SPRINGER CHROME HORN KIT
Early style 12V horn features nostalgic HarleyDavidson Bar & Shield logo on chrome cover, and
chrome mounting bracket and acorn nuts.
69036-88A
Fits ’88-later FXSTS and Softail
models equipped with Springer
Front End Kit P/N 46007-88A.
(Does not fit FLSTS.)
$66.95
J. REAR AXLE MECHANICAL
SPEEDOMETER DRIVE KIT
G. BAR & SHIELD COIL COVER
H. AIR WING HORN COVER
This kit provides a cleaner front end by moving the
mechanical speedometer drive to the rear axle.
Required for installation of Heritage Springer Front
End Kit on ’86-’95 Softail models.
67400-97
I. SPRINGER CHROME HORN KIT
J. REAR AXLE MECHANICAL
SPEEDOMETER DRIVE KIT
Fits ’86-’95 Softail models.
$73.00
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 286
Price Non-Price
286
Softail
Chrome Sliders
A. CHROME LOWER FRONT FORK
SLIDERS FOR FL SOFTAIL MODELS
Competitively-priced, these chrome-plated Lower
Fork Sliders give your bike upfront style. To ensure
proper fitment and function, these sliders are manufactured from Original Equipment components, and all
critical areas have been specifically protected from
chrome-plating. Form follows function, with polished,
hexavalent, triple chrome-plating and a stamped
“Harley-Davidson” logo for product identification. Kit
includes right and left side and the bottom axle retainer.
46482-00
45310-98
Fits ’00-later FLSTC
and FLSTF models.
(Reflectors included.)
Fits ’86-’99 FLSTC, FLSTF
and FLSTN models.
$289.95
$279.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
A. CHROME LOWER FRONT FORK SLIDERS FOR FL SOFTAIL MODELS
14287
VSA Partners
Harley-Davidson
Page 287
Price Non-Price
287
Softail
Chrome Sliders
B. CHROME LOWER FORK SLIDERS –
SOFTAIL DEUCE STYLE
Now you can add these unique lowers to your stock
Softail. A great way to chrome your front end with the
quality and fitment you can expect from a HarleyDavidson part.
46522-00
Fits ’00-later FXST, and
FXSTB models. Stock on
’00-later FXSTD models.
Requires separate purchase of
primed or colour-matched FXSTD
fender, Acorn Nut P/N 8001 (2),
Spacer P/N 43623-00 (1),
Axle P/N 43354-00 (1).
$399.95
C. CHROME LOWER FRONT FORK
SLIDERS FOR FX SOFTAIL MODELS
Competitively-priced, these chrome-plated Lower
Fork Sliders give your bike upfront style. To ensure
proper fitment and function, these sliders are manufactured from Original Equipment components, and
all critical areas have been specifically protected
from chrome-plating. Form follows function, with
polished, hexavalent, triple chrome-plating and
a stamped “Harley-Davidson” logo for product identification. Kit includes right and left side and the
bottom axle retainer.
46477-00
45305-98
Fits ’00-later FXDWG,
FXST and FXSTB models.
(Reflectors included.)
Fits ’91-’99 FXDWG, FXST,
FXSTC and FXSTB models.
$294.95
$289.95
D. CHROME UPPER FORK SLIDER COVERS
Brilliant chrome accents for the upper fork legs.
Perfect for finishing off that chromed front end look.
When used with H-D Genuine Motor Accessory
Chrome Lower Front Fork Sliders, you’ve got a front
end that’s completely chromed and an appearance
that’s utterly impressive.
45963-97
Fits ’49-’84 FL, ’80-later FLT,
FLHT, FLHR, FLTR models and
’86-later FLSTC, FLSTF and
FLSTN models. (pair)
$57.00
B. CHROME LOWER FORK SLIDERS – SOFTAIL DEUCE STYLE
C. CHROME LOWER FRONT FORK
SLIDERS FOR FX SOFTAIL MODELS
D. CHROME UPPER FORK SLIDER COVERS
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 288
Price Non-Price
288
Softail
Black Components
A. GLOSS BLACK COMPONENTS
FOR SOFTAIL MODELS
The classic Harley-Davidson colour is black. It shows
your attitude, your feelings, and your desire to be
different from the rest. These gloss black front end
accessories are the ultimate extension of the HarleyDavidson philosophy. These radical accessories are
e-coated and then powder-coated for maximum
gloss and maximum protection against corrosion.
These colour-matched accessories are manufactured
from Original Equipment components, ensuring
superior fit and finish.
Gloss Black Engine Guard Kit
49023-02
Fits ’00-later FLSTC,
FLSTS and FLSTF models.
$169.95
Gloss Black Rear Saddlebag Guard Kit
49269-02
Fits ’00-later Softail models (except
FXSTD, FLSTF and FLSTS). ’00-later
FLSTC models require Saddlebag
Relocation Kit P/N 90238-00. $169.95
Gloss Black Upper Fork Tube Cover Kit
45591-02
Fits ’00-later FLSTC
and FLSTF models.
$49.95
Gloss Black Lower Fork Slider Kit
46540-02
Fits ’00-later FLSTC
and FLSTF models.
$249.95
Gloss Black Triple Tree Cover Kit
69310-02
Fits ’00-later FLSTC
and FLSTF models.
$199.95
B. GLOSS BLACK LOWER
FRONT FORK SLIDERS
These gloss black coated sliders are the ultimate
extension of the FXSTB Night Train model’s “dark
side” and make a perfect custom addition to any
Softail Night Train or Softail Standard. The sliders are
built to Original Equipment specifications and the
durable black coating is applied to H-D standards.
45719-02
Fits ’00-later FXST
and FXSTB models.
$249.95
C. GLOSS BLACK TRIPLE TREE KIT
These gloss black powder-coated triple trees are not
only manufactured to the same specifications as
Original Equipment parts, they are made and coated
by H-D’s York Assembly Plant. An ideal Customisation
option for the FXSTB Night Train model, they also
make a perfect addition to any FXST Softail Standard.
46169-02
Fits ’00-later FXST
and FXSTB models.
$199.95
A. GLOSS BLACK COMPONENTS FOR SOFTAIL MODELS
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. GLOSS BLACK LOWER
FRONT FORK SLIDERS
C. GLOSS BLACK TRIPLE TREE KIT
14287
VSA Partners
Harley-Davidson
Page 289
Price Non-Price Common
289
Softail
Triple Tree and Fork Dust Covers
D. CHROME FORGED BILLET
ALUMINIUM TRIPLE TREE KIT
A very thick, forged billet aluminium piece that loudly pronounces “custom”. This triple tree kit is precision machined from 7075-T6 aluminium, highly-polished, and dual nickel chrome-plated. A precisely
machined, distinctive “Harley-Davidson” trademarked logo is proudly displayed on the front of the
triple tree. Kit comes complete with both top and
lower triple trees, steering stem, bearings, dust cups
and mounting hardware. Installation of this kit
disables Original Equipment fork lock function.
45748-01
Fits ’84-later FXST, FXSTC
and FXSTB Softail models and
’93-later FXDWG models.
Windshields will not fit with this kit.
Requires separate purchase
of stainless braided brake line
for the appropriate model. Kit
requires separate purchase of
Fork Stop Kit P/N 46072-02,
46073-02 or 46074-02.
$399.95
FORK STOP KIT
Required for installation of Triple Tree Kit P/N 45748-01.
46072-02
46073-02
46074-02
Fits ’00-later Softail models.
Fits ’84-’99 FXST/C models.
Fits ’93-later FXDWG models.
$12.95
$12.95
$12.95
E. CHROME DECORATIVE FORK
JOINT COVERS
Easy to install and require no tools. Patented.
45411-82
45415-82
Fits ’87-earlier XL, FXR,
and FX models equipped
with 35mm forks.
Fits ’84-later FXST, FXSTC,
FXSTB, ’93-later FXDWG and
’80-’86 FXWG models.
$43.95
$45.95
F. CHROME LOWER FRONT FORK
DUST COVER
Replace your stock black rubber fork slider seal with
this beautiful, chrome billet aluminium, 6061-T6 dust
cover.
45243-00
Fits ’84-later FXST, FXSTC,
FXSTB, and FXDWG and
’80-’86 FXWG models.
$59.95
D. CHROME FORGED BILLET ALUMINIUM TRIPLE TREE KIT
E. CHROME DECORATIVE
FORK JOINT COVERS
F. CHROME LOWER FRONT FORK DUST COVER
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 290
Price Non-Price Common
290
NEW
Softail
Chrome Panels and Spacers
A. CHROME HEADLAMP FILLER PANEL KIT
Complete the smooth, sleek front end styling of your
Softail Deuce with this unique accessory. Polished
and plated to a brilliant shine, this panel fills the area
behind the headlamp and between the fork tubes for
a solid, beefy look. Kit includes all necessary mounting hardware.
69335-03
Fits ’00-later FXSTD models.
Stock on ’03 FXSTDSE.
$89.95
Inset photo:
CHROME RISER FILLER TRIM KIT
The sweeping curved handlebar risers of the Softail
Deuce make a dramatic showing, and this Riser Filler
Trim Kit makes the final statement. This beautifully polished and plated accent panel fills the area between
the risers, concealing the wires and adding extra
“beef” to the handlebar. You get the look of a solid
riser, without the expense and installation hassles.
69334-03
Fits ’00-later FXSTD models.
Stock on ’03 FXSTDSE.
$39.95
B. CHROME REAR WHEEL SPACER KIT
Add some chrome detail to an often overlooked area
of the bike with these highly-polished Chrome Wheel
Spacer Kits. Manufactured to the Original Equipment
tolerances, they ensure product fitment and quality.
41596-00
Fits all ’00-later Softail models.
$27.95
C. CHROME FRONT WHEEL SPACER KIT
There’s always more room for chrome with these
highly-polished Chrome Wheel Spacer Kits. They’re
manufactured to the Original Equipment tolerances,
so you get exact product fitment and quality.
41597-00
Fits ’00-later FXST and
FXSTB Softail models and
’00-later FXDWG models.
$25.95
A. CHROME HEADLAMP FILLER PANEL KIT
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. CHROME REAR WHEEL SPACER KIT
C. CHROME FRONT WHEEL SPACER KIT
14287
VSA Partners
Harley-Davidson
Page 291
Price Non-Price Common
291
NEW
Softail
Axle Covers and Spacers
D. CLASSIC CHROME BULLET
FRONT AXLE COVERS
The brilliant finish and the conical “Bullet” shape of
these Front Axle covers are the ideal complement to
the Softail Deuce fork sliders. This easy-to-install
cover kit include mounting hardware.
44122-03
Fits ’00-later FXSTD models.
$34.95
E. BILLET FRONT AXLE NUT COVERS
These polished and chrome-plated Billet Front Axle
Nut Covers are styled to match H-D Billet Style Hand
Grips and Footpegs. Machined from premium 6061-T6
aluminium, the dramatic knurling and black bands
offer a clean custom look. Sold in pairs.
43388-01
Fits ’80 -’99 Touring models,
’84-later Softail models (except
FXSTD, and Springer models),
and ’95-later FXDWG models.
$39.95
F. FRONT AXLE NUT COVERS
D. CLASSIC CHROME BULLET
FRONT AXLE COVERS
Classic Chrome-Billet
1. 43375-00 Fits ’00-later Touring models.
E. BILLET FRONT AXLE NUT COVERS
Classic Chrome – Die Cast
43373-00
Fits ’00-later Touring models.
43899-86A Fits ’84-later Softail (except
1
2
$36.95
$23.95
FXSTS, FXSTSB, FLSTS), ’91-later
FXD/FXDWG Dyna ’80-’99 FLT,
FLTR, FLHT, FLHS, FLHR; ’88-later
FXR/XL, ’87 FXLR/FXRS-S,
’73-’84 FLH, ’80-’86 FXWG.
$20.95
3
H-D Motor Co. Collection
2. 43376-00 Chrome.
Fits ’00-later Touring models.
Chrome.
Fits ’84-later Softail (except
FXSTS, FXSTSB, FLSTS),
’91-later FXD/FXDWG Dyna,
’80-’99 FLT, FLTR, FLHT,
FLHS, FLHR; ’88-later FXR/XL,
’87 FXLR/FXRS-S, ’73-’84
FLH, ’80-’86 FXWG.
3. 43377-00 Satin Chrome.
Fits ’00-later Touring models.
Satin Chrome.
43865-96
Fits ’84-later Softail (except
FXSTS, FXSTSB, FLSTS),
’91-later FXD/FXDWG Dyna,
’80-’99 FLT, FLTR, FLHT,
FLHS, FLHR; ’88-later FXR/XL,
’87 FXLR/FXRS-S, ’73-’84
FLH, ’80-’86 FXWG.
$24.95
43864-96
$22.95
$24.95
$22.95
F. FRONT AXLE NUT COVERS
G. CHROME FRONT WHEEL SPACER KIT
NEW
NEW
Fill the gap between the wheel and the fork slider with
this unique Spacer Kit. The rounded design complements any wheel and rotor combination, and looks
great with the sleek Softail Deuce fork sliders. Kit
includes left and right side spacers.
41580-03
Fits ’00-later FXSTD models.
Stock on ’03 FXDTDSE.
$39.95
H. CHROME REAR WHEEL SPACER KIT
This nicely polished and plated spacer fills the area
between the rear wheel and the swingarm, adding a
custom detail most riders miss. The rounded design
complements both stock and custom wheels, and is a
great match with a chrome swingarm. Kit includes left
and right side spacers.
41581-03
G. CHROME FRONT WHEEL SPACER KIT
H. CHROME REAR WHEEL SPACER KIT
Fits ’00-later Softail models.
Stock on ’03 FXSTDSE.
$39.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 292
Price Non-Price Common
292
NEW
Softail
Triple Trees and Fork Nut Covers
A. LOWER TRIPLE TREE COVER
This Lower Triple Tree Cover dresses up the unfinished
underside of the triple tree for a complete custom look.
The chrome-plated steel cover installs easily, concealing the brake splitter fitting. All mounting hardware is
included. From the workshop of Wyatt Fuller.
66053-01
Fits ’00-later FL Softail
models (except FLSTS).
$36.95
B. CHROME LOWER TRIPLE TREE COVER
This Lower Triple Tree Cover dresses up the unfinished
underside of the triple tree for a complete custom look.
The chrome-plated steel cover installs easily on the
underside of the triple tree, and all mounting hardware
is included. From the workshop of Wyatt Fuller.
66021-00
Fits ’00-later FXSTD models.
$34.95
C. CHROME UPPER FORK NUT COVERS
Highlighted with a unique Bar & Shield logo, these polished triple chrome-plated covers add an additional
clean looking appearance to your upper fork. Kit
comes complete with three covers, mounting hardware and wrench for easy, on-the-spot installation.
46129-98
45002-98
A. LOWER TRIPLE TREE COVER
Fits ’86-later FLSTC, ’90-later
FLSTF, ’95-later FXD, ’93-later
FXDL, ’94-later FXDS, and
’88-later XL 883 models. (Does
not fit XL 1200S, XL 1200 Custom
or 883 Custom models.)
$46.95
Fits ’00-later FSXT, FXSTB, FXSTD
and ’86-’99 FXSTC Softail models
and ’93-later FXDWG models.
$46.95
D. CHROME RISER CUP WASHER KIT
Add a finishing touch to the riser on your bike. This kit
includes two styled and chrome-plated washers that
replace the standard metal washers below the handlebar risers. Replaces Original Equipment P/N 56159-73.
56486-01
Fits most XL, Dyna
and Softail models. See
your Dealer for specific
model application.
$23.95
B. CHROME LOWER TRIPLE TREE COVER
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
C. CHROME UPPER FORK NUT COVERS
D. CHROME RISER CUP WASHER KIT
14287
VSA Partners
Harley-Davidson
Page 293
Price Non-Price Common
293
Softail
Chrome Hubcaps and Fork Braces
E. FRONT HUBCAPS
Adds a touch of class and complements the classic
styling of 21" laced wheels. Hand-polished and
chrome-plated to rigid specifications.
43287-01
43163-97
44465-88A
Fits ’00-later FXDWG, FXSTB,
FXSTD and FXSTS models
with laced wheels.
$43.95
Fits ’97-’99 FXSTC and
FXDWG models. (Cannot be
used with Genuine Motor
Accessory Custom Wheels.)
$43.95
Fits ’84-’96 FXWG, FXST,
FXSTC, FXSTS and ’93-’96 FXDWG.
Fits ’87-earlier sport models equipped
with 35 mm front forks. Easy
to install – no tools required.
$37.95
F. FRONT HUBCAP
FOR HERITAGE SPRINGER
E. SOFTAIL CUSTOM AND DYNA WIDE
GLIDE FRONT HUBCAP
F. HERITAGE SPRINGER FRONT HUBCAP
A brilliant, hand-polished, chrome-plated hubcap is
the perfect nostalgic complement to the laced wheels
and whitewall tires of the FLSTS.
43295-01
43162-97
Fits ’00-later FLSTS models
with laced wheels.
Fits ’97-’99 FLSTS models.
$43.95
$43.95
Shown with:
TEARDROP FRONT
FORK ROCKER COVERS
Nostalgic chrome-plated styling that seems to be in
constant motion. Easily installs on Heritage Springer
without removing wheel. Patent applied for.
43161-97
Fits ’97-later FLSTS.
$64.95
SCREAMIN’ EAGLE
CHROME FORK BRACE
These chrome fork braces are machined from billet
aluminium, then polished and chrome-plated. Easy to
install, these braces offer increased torsional rigidity.
Made in the U.S.A.
G. 46193-99 41mm.
Fits ’84-later FXST, FXSTC,
FXSTB and ’93-later
FXDWG models with 41mm
front forks. Will not fit
with chrome fork sliders.
H. 46265-02 Fits ’00-later FXSTD models.
$199.95
$219.95
I. FORK BRACE
This chrome-plated fork brace adds style to the front
end.
G. SCREAMIN’ EAGLE
CHROME FORK BRACE – 41MM
H. CHROME FORK BRACE
46097-98
Fits ’93-later FXDWG and ’84-later
FXST models (except Springer
and FXSTD) and ’99-later FXSTB
models. (Will not fit with Chrome
Lower Fork Sliders P/Ns
45305-98 or 46477-00.)
$129.95
J. THE LOCK BLOCK
This uniquely-styled chrome Lock Block allows the
rider to store our most popular Harley Bar & Shield
Padlock (P/N 45737-72A) on the bike in the locked
position, secured in place by an O-ring. Installed on
the front chassis, the lock block provides a convenient, hidden, easy-to-access lock storage space.
Manufactured from billet aluminium. Kit includes
chrome mounting hardware.
46466-99A
Fits ’84-later Softail
models. Do not install on
FLSTC or FLSTS models.
$34.95
Shown with:
BAR & SHIELD PADLOCK AND
LEATHER PADLOCK POUCH (sold separately)
Bar & Shield Padlock
Our best-selling lock of all time. A beautiful lock with
a long, proven history of success.
45737-72A
I. FORK BRACE
Chrome-plated
and case-hardened.
J. LOCK BLOCK SHOWN WITH LOCK
14287
VSA Partners
Harley-Davidson
$21.95
Page 294
Price Non-Price Common
294
Softail
Fork Covers and Deflectors
A. CHROME FORK COVER KIT
Replace your factory-equipped fork covers with these
brilliant, triple chrome-plated versions for a long-lasting mirror-like finish.
67890-91A
Fits ’86-later FLST, FLSTC,
FLSTF, FLSTN models.
$119.95
Shown with:
B. CHROME FORK COVER
ACCENT STRIP KIT
Sometimes the best ideas come from you, our fellow
riders, like this chrome accent strip. This kit is
designed to add the ultimate complement to the
already popular chrome triple clamp kit by accenting
the sides with beautiful chrome-extruded aluminium
strips. Kit includes chrome hardware.
67891-99
Fits ’86-later FLST, FLSTC,
FLSTF, FLSTN models with
Chrome Fork Cover Kit
P/N 67890-91A. (Does not
fit with passing lamps
and windshields.)
$24.95
C. SOFTAIL CHROME WIND DEFLECTORS
Adds the fully-dressed look to Heritage Softail Classic
models. Redesigned to fit models with 5-gallon Fat
Bob fuel tanks.
58125-90B
Fits ’86-later FLSTC, FLST, FLSTF,
and FLSTN models equipped with
Harley-Davidson King-Size Windshield
and/or Passing Lamp Kits. (Designed to
also fit with accessory 5-gallon Fat Bob
fuel tanks.) (Does not fit FLSTS.) NOTE:
Windshield cannot be adjusted
with wind deflectors without kit
P/N 58155-90.
$66.50
A. CHROME FORK COVER KIT
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. CHROME FORK COVER ACCENT STRIP KIT
C. SOFTAIL CHROME WIND DEFLECTORS
14287
VSA Partners
Harley-Davidson
Page 295
Price Non-Price Common
295
Softail
Headlamp Nacelle and Hardware
D. CHROME HEADLIGHT NACELLE
If the chrome from this nacelle seems to reflect the
image of 1960’s FL, that’s because the spirit of the
past styling is built right in. Coupled with the separate purchase of the Chrome Nacelle Hardware Kit
(P/N 67897-96), it will work with existing H-D
windshield and/or passing lamps. Includes hardware
for installation of Nacelle with detachable windshield
without passing lamp. Hardware kit is required when
installing chrome Nacelle with passing lamps or rigid
mount windshield.
67907-96
Fits ’86-later FL Softail models
(except FLSTS or FXSTS).
$389.95
Shown with:
CHROME UPPER FORK SLIDER COVERS
Brilliant chrome accents for the upper fork legs.
Perfect for finishing off that chromed front end look.
When used with H-D Genuine Motor Accessory
Chrome Lower Front Fork Sliders, you’ve got a front
end that’s completely chromed and an appearance
that’s utterly impressive.
45963-97
Fits ’49-’84 FL, ’80-later FLT,
FLHT, FLHR, FLTR models
and ’86-later FLSTC, FLSTF
and FLSTN models. (pair)
$57.00
Also shown with:
CHROME NACELLE HARDWARE KIT
This kit provides the additional hardware required to
install the Chrome Headlight Nacelle P/N 67907-96 on
FL Softail models that were previously equipped with
passing lamps, rigid mounted windshields or
Detachable windshields.
NOTE: This kit is not required when installing
windshield P/Ns 58649-97A, 58651-97A, 58652-97A
and 58653-97A.
67897-96A
$45.95
Adjustable Window
When installing the Chrome Headlight Nacelle P/N
67907-96 on FL Softail models that were previously
equipped with a two-piece windshield, the Adjustable
Window must be trimmed for additional clearance.
This modification can be eliminated by installing this
new Adjustable Window specifically designed for the
shape and contour of the Chrome Headlight Nacelle.
58663-97
$34.95
E. CHROME FRONT FUEL TANK MOUNTING
HARDWARE KIT – SOFTAIL MODELS
Beauty lies in the details. And this chrome-plated Fuel
Tank Mounting Hardware Kit ensures you won’t leave
this one overlooked. The perfect finishing touch to
your fuel tank, the kit includes the machined washers
and custom nuts required for your model.
D. CHROME HEADLIGHT NACELLE
62965-01
Fits ’00-later Softail models.
$24.95
F. CHROME BILLET CLUTCH CABLE CLAMP
The perfect addition to braided stainless or stock
black clutch cables. This Clutch Cable Clamp is
machined from aluminium billet, and polished and
plated for a lasting shine. The clamp is designed
to grip the cable and the frame down tube, adding a
custom look to the front of your cycle.
91147-02
E. CHROME FRONT FUEL TANK MOUNTING
HARDWARE KIT – SOFTAIL MODELS
F. CHROME BILLET CLUTCH CABLE CLAMP
Fits all models with
1-1/4" diameter front frame
down tube. (Does not fit
Touring models.)
$39.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 296
Price Non-Price Common
296
Softail
Chrome Swingarm and Covers
A. CHROME-PLATED SWINGARM
FOR SOFTAIL MODELS
The ultimate chrome accessory polished to the
highest standard using bright hexavalent plating.
Affordable and convenient, with no troublesome
exchanges necessary. Factory-made specifications
guarantee exact fitment, unparalleled quality and
affordable price. Stamped with the Harley-Davidson
Bar & Shield logo.
48442-00
49231-97
Fits ’00-later Softail models.
Fits ’89-’99 Softail models.
$549.95
$549.95
Shown with:
CHROME SWINGARM AXLE COVERS
FOR SOFTAIL
Unique styling includes recessed brushed aluminium
trim discs. These covers are hand-polished and
include copper, nickel, and chrome finishing processes. Includes a pair of axle mounting brackets, cotter
pin, muffler spacers (required on FLSTN models only),
and installation instructions. Replacement nameplate
P/N 47604-91. Patented.
47596-91B
Fits ’87-later Softail models
(except FLSTS). (Will not work
with Saddlebags P/N’s 91190-97,
90835-90C, 90119-00, 91536-00,
91537-00 and 90114-00.)
$69.95
A. CHROME-PLATED SWINGARM FOR SOFTAIL MODELS
B. CHROME LOWER BELT GUARD
Replaces the Original Equipment, providing exceptional, chrome-plated detail to the rear drive system.
Includes all mounting hardware.
60316-00
60389-97A
60394-90A
60366-89A
Fits all ’00-later Softail models. $69.95
Fits all ’95-’99 U.S. and
International Softail models and
’94-’99 International models equipped
with a 65-tooth rear sprocket.
$64.95
Fits all ’93 U.S. Softail models,
and all ’88-’93 International Softail
models, and ’94 Australian
Softail models equipped with 61-tooth
rear sprockets. Not intended for
use with 65-tooth rear sprocket. $48.95
Fits ’85-’92 and ’94 U.S. Softail
models equipped with 70-tooth rear
sprocket. (Does not fit ’93 U.S.
Softail or ’88-’93 International Softail
models equipped with 61-tooth
rear sprocket.) Not intended for
use with 65-tooth rear sprocket. $48.95
C. SWINGARM PIVOT AXLE KIT
Designed to replace the Original Equipment swing
arm pivot axle. This styled axle looks great by itself, or
is a great addition when installing a chrome swingarm.
47119-02
Fits ’00-later Softail models.
Will not fit with Passenger Footboard
Kit P/N 50602-00, 50602-89B,
50955-00 or 50955-97A
$89.95
A. CHROME-PLATED SWINGARM
FOR SOFTAIL MODELS
B. CHROME LOWER BELT GUARD
NEW
D. POLISHED STAINLESS STEEL
REAR FENDER EXTENSION
Polished to a mirror finish that nearly looks like chrome,
this extension adds additional beauty in an area that’s
usually overlooked. A great addition to any Softail.
60476-00
60401-98
Fits all ’00-later Softail models.
Fits all ’86-’99
Softail models. (shown)
$39.95
$39.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
C. SWINGARM PIVOT AXLE KIT
D. POLISHED STAINLESS STEEL
REAR FENDER EXTENSION
14287
VSA Partners
Harley-Davidson
Page 297
Price Non-Price Common
297
Softail
Frame Inserts and Pivot Bolt Covers
E. CHROME UPPER SWINGARM
COVER KIT FOR SOFTAIL MODELS
Give chrome the upper hand with this chrome die-cast
cover for your upper swingarm. Mounts easily with all
necessary hardware included. Then continue your
back-end chrome with Rear Axle Cover Kit P/N
48112-00 or 48056-97B.
47059-01
Fits ’00-later Softail models
(except FXSTD).
$69.95
F. SOFTAIL FRAME TRIM SET
Easy-to-install chrome-plated trim plates fit into
recesses on rear of Softail frame near swingarm pivot.
Comes with double-sided adhesive tape. Adds a finishing touch. (Shown with Chrome Swingarm Pivot
Cover P/N 43897-86B, sold separately.)
47300-88T
Fits all ’84-later Softail models
(except ’00-later FLSTF and
FXSTD models equipped
with shotgun exhaust).
$17.95
G. SOFTAIL FRAME INSERT
AND PIVOT BOLT KIT
E. CHROME UPPER SWINGARM COVER KIT FOR SOFTAIL MODELS
Chrome rear frame inserts get you going on the road
toward the perfect Softail. Kit includes Swingarm Pivot
Bolt Covers and Frame Inserts. Easy installation kit.
48452-00
Fits ’00-later FLSTF and
FXSTD models.
$36.95
H. SWINGARM PIVOT BOLT COVER KITS
1. Aluminator Chrome Billet
Swingarm Pivot Bolt Cover Kit
Cover your swingarm pivot bolt with the distinctive
styling of the Aluminator collection. These covers are
made from chrome-plated billet aluminium and
engraved with the Bar & Shield emblem. Hex wrench
included for easy installation. Sold in pairs.
43314-01
43821-95
Fits ’00-later Softail models
(except FLSTF, FXSTD and
models with Passenger
Footboard Kit P/N 50602-00
or 50955-00).
Fits all ’84-’99 Softail
models (except FLSTS).
$42.95
$33.95
2. Classic Chrome
Includes Allen-head set screws and wrench for easy
installation. Sold in pairs.
43462-00
F. SOFTAIL FRAME TRIM SET
G. SOFTAIL FRAME INSERT AND PIVOT BOLT KIT
43897-86B
Fits ’00-later Softail models (except
FLSTF, FXSTD and models with
Passenger Footboard Kit P/Ns
50602-00 and 50955-00).
$21.95
Fits all ’84-’99 Softail models
(except FLSTS).
$20.95
3. H-D Motor Co. Pivot Bolt Cover
Die-cast, chrome-plated with black “Harley-Davidson
Motor Co.” logo. Includes Allen-head set screws, and
wrench for easy installation. Sold in pairs.
Fits ’00-later Softail models (except FLSTF, FXSTD
and models with Passenger Footboard Kit P/Ns
50602-00 and 50955-00).
43468-00
43469-00
Chrome.
Satin Chrome.
$22.95
$22.95
Fits all ’84-’99 Softail models. (Does not fit FLSTS.)
43830-96
Chrome.
$22.95
43831-96
Satin Chrome.
$22.95
1
H. SWINGARM PIVOT BOLT COVER KITS
3
2
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 298
Price Non-Price Common
298
NEW
Softail
Chrome Covers and Hardware
A. SOFTAIL SWINGARM FRAME COVER KIT
This easy to install die-cast Swingarm Frame Cover
Kit adds a flash of chrome around the swingarm pivot.
The adhesive mounted custom moulded rubber
inserts fit the contour of the frame for a custom look,
and the included cast Bar & Shield pivot bolt cover
adds a finishing touch. From the workshop of Wyatt
Fuller.
48490-00
Fits ’00-later Softail models
(except FLSTF, FXSTD,
FLSTS and models equipped
with Passenger Footboard Kits
P/N 50602-00 or 50955-00).
$59.95
B. PIVOT BOLT & FOOTPEG
MOUNT COVER KIT
Add a slash of chrome to your bike’s profile. These
chrome plated die-cast covers bridge the swingarm
pivot bolt and the passenger foot peg mount, adding
more visual impact than traditional pivot bolt covers.
The moulded rubber inserts and the included hardware create a tight custom fit, and the engraved Bar &
Shield logo completes the look. From the workshop of
Wyatt Fuller.
48491-01
Fits ’00-later Softail
models (except FXSTD, FLSTF
and models with passenger
footboards installed).
A. SOFTAIL SWINGARM FRAME COVER KIT
B. PIVOT BOLT & FOOTPEG MOUNT
COVER KIT
C. CHROME HARDWARE KIT
FOR REAR BELT SPROCKET
D. CHROME SOCKET HEAD CAP
SCREW HARDWARE KIT FOR
REAR BELT SPROCKET
E. DECORATIVE CHROME ACORN NUT/STUD KIT
F. CHROME REAR HUBCAP KIT
$32.95
C. CHROME HARDWARE KIT
FOR REAR BELT SPROCKET
This kit includes highly-polished, chrome-plated,
grade eight hex-head screws with chrome-plated
washers, providing an extra custom accent. The perfect addition to the new chrome sprocket. Made from
the same Original Equipment bolts to ensure product
integrity. Also works with chrome belt sprocket covers
and Original Equipment sprockets.
94773-00
94708-98
Fits ’00-later Softail
and Dyna models.
Fits all ’93-’99 Softail, ’93-’99
Dyna, ’91-later Sportster
rear belt sprockets.
$28.95
$28.95
D. CHROME SOCKET HEAD CAP SCREW
HARDWARE KIT FOR REAR BELT SPROCKET
These Socket Head Cap Screws provide extra
chrome detail to the rear belt sprocket. Includes
chrome-plated washers and grade 8 hardware to
ensure maximum product integrity.
43245-00
43244-00
Fits all ’00-later Softail models.
Fits all ’93-’99 Softail models.
E. DECORATIVE CHROME
ACORN NUT/STUD KIT
91734-85
Fits ’80-’99 Evolution
1340-equipped models
(except Dyna models)
equipped with secondary belt
drive and cast rear wheels.
$26.95
$26.95
$33.95
F. CHROME REAR HUBCAP KIT
Add custom style to your rear wheel with this “babymoon” shaped hubcap, which is machined from high
quality billet aluminium, chrome-plated and highly
polished. Designed to allow use with chrome sprocket
covers. From the workshop of Wyatt Fuller.
43253-00A
43200-99A
Fits all ’00-later Softail models.
Fits all ’93-’99 Softail models.
$59.95
$59.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 299
Price Non-Price Common
NEW
299
NEW
Softail
Rear Axle Nut Covers
G. REAR AXLE NUT COVER KIT
Cover your rear axle nut in the most traditional way.
This Rear Axle Nut Cover Kit complements the matching front axle nut covers and the swingarm pivot
bolt covers that are available for your Softail model.
Easy to install, these cover kits include necessary
mounting hardware. Sold in pairs. From the workshop
of Wyatt Fuller.
H-D Motor Co. Collection – Chrome
44254-01
Fits ’00-later Softail models.
$26.95
H-D Motor Co. Collection – Satin Chrome
44255-01
Fits ’00-later Softail models.
$26.95
Classic Chrome Collection
44256-01
Fits ’00-later Softail models.
$24.95
H. SIX-SHOOTER REAR AXLE
COVER AND ADJUSTER
Shoot for the custom look with this chrome revolverstyled axle adjuster cover. Machined from billet
aluminium for maximum style.
G. REAR AXLE NUT COVER KIT – CHROME
REAR AXLE NUT COVER KIT – SATIN CHROME
48179-98A
NEW
Fits ’86-later Softail models.
(Will not fit with Saddlebags
P/N’s 91190-97, 90835-90C,
90119-00, 91536-00, 91537-00
and 90114-00.)
$69.95
I. PISTON REAR AXLE
COVER AND ADJUSTER
Simple, clean chrome-plated styling to add brilliance
to your rear axle adjuster.
48180-98A
Fits ’86-later Softail models.
(Will not fit with Saddlebags
P/N’s 91190-97, 90835-90C,
90119-00, 91536-00,
91537-00 and 90114-00.)
$62.95
J. O-RING KIT FOR PISTON
REAR AXLE COVER AND ADJUSTER
This O-ring Kit was specifically developed for the
Piston Rear Axle Cover Adjuster Kit (P/N 48180-98A).
The O-rings fit nicely into the grooves on the covers
and adjusters. Adds an additional flair to these already
beautifully chromed pieces. Shown with Piston Rear
Axle Cover and adjuster which is sold separately.
49001-98
REAR AXLE NUT COVER KIT –
CLASSIC CHROME
I. PISTON REAR AXLE COVER
AND ADJUSTER
Fits Piston-Style Axle Cover/
Adjuster Kit P/N 48180-98A.
$4.50
H. SIX-SHOOTER REAR AXLE
COVER AND ADJUSTER
J. O-RING KIT FOR PISTON REAR
AXLE COVER AND ADJUSTER
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 300
Price Non-Price Common
300
Softail
Swingarm Axle Covers
A. SOFTAIL SWINGARM AXLE COVER
Chrome-plated die-cast cover, accented with textured
recesses and an engraved Bar & Shield emblem. From
the workshop of Wyatt Fuller.
48112-00
48056-97B
Fits ’90-later FLSTF
and ’00-later FXSTD models.
(Will not fit with Saddlebags
P/N’s 91190-97, 90835-90C,
90119-00A, 91536-00A,
91537-00A, 91555-01A
and 90114-00.)
$112.95
Fits ’87-later Softail models (except
FLSTF, FLSTN and FXSTD models
with stock shotgun exhaust).
(Will not fit with Saddlebags P/N’s
91190-97, 90835-90C, 90119-00A,
91536-00A, 91537-00A,
91555-01A and 90114-00.)
$109.95
B. BLACK SOFTAIL
SWINGARM AXLE COVERS
Our traditional Softail Axle Covers are available with
an elegant black painted finish. They are accented
with a dark aluminium emblem and a bright “HarleyDavidson” script. Chrome hardware included. Patented.
47615-95B
Fits ’87-later Softail models
(except FLSTS). (Will not fit
with Saddlebags P/N’s 91190-97,
90835-90C, 90119-00A,
91536-00A, 91537-00A,
90114-00 and 91555-01A.)
$76.95
NOTE: All black parts are painted with a special twostep urethane process with hardeners for a durable,
glossy shine. As with any painted surface, care must
be taken when using.
C. CHROME SWINGARM AXLE COVERS
FOR SOFTAIL MODELS
Unique styling includes recessed brushed aluminium
trim discs. These covers are hand-polished and
include copper, nickel, and chrome finishing processes. Includes a pair of axle mounting brackets, cotter
pin, muffler spacers (required on FLSTN models only),
and installation instructions. Replacement nameplate
P/N 47604-91. Patented.
47596-91B
Fits ’87-later Softail models
(except FLSTS). (Will not fit
with Saddlebags P/N’s 91190-97,
90835-90C, 90119-00A,
91536-00A, 91537-00A,
90114-00 and 91555-01A.)
$69.95
A. SOFTAIL SWINGARM AXLE COVER
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. BLACK SOFTAIL SWINGARM AXLE COVERS
C. CHROME SWINGARM AXLE COVERS
FOR SOFTAIL MODELS
14287
VSA Partners
Harley-Davidson
Page 301
Price Non-Price Common
301
Softail
Sprocket Covers
D. CHROME SPROCKET COVER –
DEUCE STYLING
Styled to match the distinctive FXSTD Softail Deuce
rear wheel. This sprocket cover gives the appearance
of having a custom chrome sprocket at a fraction of
the cost. Cover easily bolts on using the stock hardware. For a finished look, use the Chrome Hardware
Kit for Rear Belt Sprockets (P/N 94773-00) from
Genuine Motor Accessories.
91348-00
Fits all ’00-later Softail models.
$48.95
E. CHROME SPROCKET COVER
This sprocket cover gives the appearance of having a
chrome sprocket at a fraction of the cost. It matches
the styling of the Original Equipment sprocket and
bolts on using the stock hardware. For a finished look,
use the Chrome Hardware Kit for Rear Belt Sprocket
(P/N 94773-00) from Genuine Motor Accessories.
91347-00
Fits ’00-later Softail models.
$48.95
F. CHROME BELT SPROCKET COVERS
D. CHROME SPROCKET COVER –
DEUCE STYLING
E. CHROME SPROCKET COVER
65-Tooth Sprocket Cover
Fits all ’95-’99 Softail models and ’94-later Evolution
1340-equipped Swiss models with holes.
40317-94
$45.95
61-Tooth Sprocket Cover
This smaller diameter cover is designed for
Evolution1340-equipped models equipped with stock
production 61-tooth rear sprockets as supplied on
’88-’93 International 1340 models, ’93 U.S. Softail
models, and ’95-later Australian Softail models.
40284-90A
With holes.
$45.95
70-Tooth Sprocket Cover
Fits ’91-’99 Dyna and ’99 FXD models. Also fits
’80-later U.S. 1340 models except ’93 and ’95-later
Softail models. ’94 U.S. Softails are equipped with
70-tooth rear sprockets. Also fits all ’94-later
International 1340 models (except International
Softail and Swiss 1340 models).
91740-87A
91733-85A
Without holes.
With holes.
$44.95
$45.95
G. CHROME EXHAUST BRACKET KIT
FOR FLSTC, FXSTC AND FXSTS MODELS
Replace your stock black bracketry with this chromeplated bracket kit. Made from the same components
as the Original Equipment to ensure product integrity.
Includes chrome mounting hardware.
65526-98
Fits ’95-’99 FLSTC FXSTC
and FXSTS models.
$67.95
F. CHROME BELT SPROCKET COVERS
G. CHROME EXHAUST BRACKET KIT FOR FLSTC, FXSTC AND FXSTS MODELS
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 302
Price Non-Price Common
302
Softail
Chrome Calipers
A. CHROME FRONT CALIPER KIT
Add the shine of chrome to your front end with this
highly-polished Chrome Front Brake Caliper Kit.
Manufactured from Original Equipment components
for proven performance, these calipers are a great
addition to the stock front end or add the finishing
touch to a complete custom with chrome wheels,
rotors and chrome fork sliders. (Brake pads and pad
pins not included.)
44395-00
Fits all ’00-later models with
Single Disc Front Brakes
(except FXSTS and FLSTS).
$359.95
Shown with:
B. CHROME CALIPER BOLT COVER KIT
Cover your caliper mounting bolts in chrome. These
easy-to-install chrome covers are held firmly in place
with a spring steel clip, and are styled to match the
Chrome Rocker Box and Headbolt Covers. Each kit
includes four bolt covers. NOTE: Each front caliper
has four exposed bolts (two if a Chrome Caliper Cover
is installed), and rear caliper has three exposed bolts.
43824-01
Fits all ’00-later front and
rear 12-Point caliper
mounting bolts (except
Springer front calipers).
$18.95
Shown with:
FRONT CALIPER COVER
Chrome-plated caliper cover styled with stepped contours and textured recess for a distinctive look. Split
cover design does not require brake line removal.
From the workshop of Wyatt Fuller.
43759-00
Fits all left hand calipers on
’00-later FXDWG and ’00-later
Softail models (except Springer
and FXSTD models). (Will not fit
with braided brake lines.)
$39.95
C. CHROME REAR CALIPER KIT
With H-D chrome behind you, you’re cruising with
confidence. This Rear Caliper Kit offers a brilliant,
long-lasting chrome finish while delivering Original
Equipment performance and fitment. Bolts right to
existing mounting holes. (Brake pads and pad pins
not included.)
44414-01
44539-02
Fits ’00-later FXSTD and
’00-’02 Softail models
equipped with Wide Tyre Kit.
$424.95
Fits ’00-later Softail models
(except FXSTD) and ’02-later
VRSC models. Not compatible
with Wide Tyre Kit.
$399.95
A. CHROME FRONT CALIPER KIT
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. CHROME CALIPER BOLT COVER KIT
C. CHROME REAR CALIPER KIT
14287
VSA Partners
Harley-Davidson
Page 303
Price Non-Price Common
303
Softail
Caliper Covers
D. FRONT CALIPER COVER
Chrome-plated caliper cover styled with stepped contours and textured recess for a distinctive look. Split
cover design does not require brake line removal.
From the workshop of Wyatt Fuller.
43759-00
Fits all left hand calipers
on ’00-later FXDWG and ’00-later
Softail models (except Springer
and FXSTD models). (Will not fit
with braided brake lines.)
$39.95
E. REAR CALIPER COVER
Chrome-plated caliper covers styled with stepped
contours and textured recess for a distinctive look.
Does not require brake line removal. From the workshop of Wyatt Fuller.
43553-00
Fits ’00-later Softail and
Dyna models. (Will not fit
with braided brake lines.)
$34.95
D. FRONT CALIPER COVER
E. REAR CALIPER COVER
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 304
Price Non-Price Common
304
Softail
Caliper Rotor Covers
A. CHROME CALIPER ROTOR COVER
Add clean, chrome style to your front end with this
cover, which features high quality, hexavalent chromeplating that complements the lines of your bike.
43367-00
Fits ’00-later FLSTC
and FLSTF models.
$114.95
B. ELECTRA GLO LIGHT RING KIT
Roll on the rays of light. Featuring outer and inner
bands of amber coloured LED lights, this trim ring
easily attaches to the rotor cover, illuminating the
entire wheel at the flip of a switch. The Electra Glo
Light Ring provides auxiliary side lighting as well.
Installs easily with pre-applied adhesive backing.
Requires the installation of Caliper/Rotor Cover Kit
(sold separately).
46800-02
Amber outer colour, Amber
inner colour. Fits ’00-later
FLSTC and FLSTF models
equipped with the Chrome
Rotor and Caliper Cover
Kit P/N 43367-00.
$104.95
A. CHROME CALIPER ROTOR COVER
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. ELECTRA GLO LIGHT RING KIT
14287
VSA Partners
Harley-Davidson
Page 305
Price Non-Price Common
305
Softail
Licence Plate Mounting Kits
C. CHROME LICENCE PLATE MOUNT
Show off your tail. This chrome-plated cover fits over
the stock bobtail fender mount licence plate bracket.
This mirror-finished cover features a custom reflector
with “Harley-Davidson” graphics. Includes mounting
hardware for cover and licence plate.
59720-01A
Fits ’99-later FXDWG, ’00-later
FXSTD, FXST, FXSTS and FXSTB
models. Also fits XL models equipped
with Bobtail Fender Kit.
$34.95
D. LAYBACK LICENCE
PLATE MOUNTING KIT
Chrome-plated, light-weight, die-cast aluminium
licence plate mount. Custom reflector with HarleyDavidson logo. No modification to licence plate
required due to unique mounting system. All mounting
hardware provided.
59817-00A
C. CHROME LICENCE PLATE MOUNT –
SOFTAIL STANDARD
C. CHROME LICENCE PLATE MOUNT –
SOFTAIL DEUCE
NEW
59822-00
Fits licence plate up to 7-1/4 x 4-1/4
inches. Fits models with a three-hole
rear fender mount licence plate
bracket. (Does not fit FLSTS, FXDSCONV, FXDXT, ’00-’01 FXDX, Touring
models, VRSC models or models
with a Bobtail rear fender, check
for clearance before installing
with rear fender rack.)
$37.95
Fits licence plate up to 8-1/2 x 4-3/4
inches. Fits models with a three-hole
rear fender mount licence plate
bracket. (Does not fit FLSTS, FXDSCONV, FXDXT, ’00-’01 FXDX, Touring
models, VRSC models or models
with a Bobtail rear fender, check
for clearance before installing
with rear fender rack.)
$38.95
E. BAR & SHIELD LICENCE PLATE
MOUNTING HARDWARE KIT
Proudly display the Bar & Shield. The Bar & Shield
shaped bolt heads on this unique chrome plated
stainless steel Licence Plate Mounting Kit stand out
from the pack. The hardware is installed with a custom
Bar & Shield shaped wrench, reducing the possibility
of licence plate theft. The kit includes four lock nuts,
washers, bolts and the special wrench.
94114-02
Universal.
$19.95
F. SILVER CALIPER HARDWARE KIT
Plated silver finish hardware is a great finishing
touch to Chrome Brake Calipers. This kit replaces
the Original Equipment black 12-point bolts on a
single caliper.
D. LAYBACK LICENCE PLATE MOUNTING
KIT
E. BAR & SHIELD LICENCE PLATE
MOUNTING HARDWARE KIT
44473-02
Fits all ’00-later models
(except Springer front caliper).
$12.95
G. SILVER BRAKE PAD PIN KIT
NEW
NEW
Plated silver finish hardware is a great finishing
touch to Chrome Brake Calipers. This kit replaces
the Original Equipment black brake pad pins on a
single caliper.
44324-02
F. SILVER CALIPER HARDWARE KIT
G. SILVER BRAKE PAD PIN KIT
Fits all ’00-later models
(except Springer front caliper).
$5.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 306
Price Non-Price Common
306
Softail
Shift Levers
A. BILLET STYLE SHIFT LEVER
Styled to complement our Billet Style mirror stems,
these Billet Style Shift Levers are forged from 6061T6 aluminium, then machine-finished and chromeplated for a beautiful, custom look. Includes chrome
hardware.
34539-00
Fits ’91-later Dyna and
’90-later FX Softail models.
$79.95
B. BILLET STYLE HEEL/TOE SHIFT LEVER
Styled to complement our Billet Style mirror stems,
these Billet Style Shift Levers are forged from 6061-T6
aluminium, then machine-finished and chrome-plated
for a beautiful, custom look. Kit includes a front and
rear lever and chrome hardware.
34535-00A
Fits ’86-later FL Softail
and ’88-later FLT, FLTR, FLHR,
FLHS and FLHT models.
$139.95
C. BULLET SHIFT LEVER
The “bullet grooved” sweep of this forward curving
shift lever accents the style of your low and lean FX
Softail model. Designed to complement the “Bullet”
shift linkage and mirrors, this beautifully chromed
lever also looks great with Original Equipment brake
levers and linkages.
34616-02
Fits ’91-later Dyna models
and ’90-later FX Softail models. $59.95
A. FX SOFTAIL BILLET STYLE SHIFT LEVER
NEW
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. FL SOFTAIL BILLET STYLE
HEEL/TOE SHIFT LEVER
C. BULLET SHIFT LEVER
14287
VSA Partners
Harley-Davidson
Page 307
Price Non-Price Common
307
Softail
Brake Levers
D. BILLET STYLE REAR BRAKE LEVER
Styled to complement our Billet Style mirror stems
and shift levers, this Billet Style Rear Brake Lever is
forged from 2014-T6 aluminium, then machine-finished and chrome-plated for a beautiful, custom look.
Brake Pedal Pads sold separately.
42632-00
42634-00
Fits ’00-later FXST, FXSTS,
FXSTB and FXSTD models
(except FXSTD2).
$159.95
Fits ’84-’99 FXST, FXSTC,
FXSTS and FXSTB models. (Will
not fit with FX Softail Rear Master
Cylinder Cover P/N 41796-97.) $159.95
Shown with:
BILLET STYLE BRAKE PEDAL PAD –
NARROW BAND
42629-00
Small.
Fits ’84-later FXST,
FXSTS, FXSTB models and
’93-later FXDWG models.
$38.50
BILLET STYLE REAR BRAKE LEVER
Styled to complement our Billet Style mirror stems
and shift levers, this Billet Style Rear Brake Lever is
forged from 2014-T6 aluminium, then machine-finished and chrome-plated for a beautiful, custom look.
Brake Pedal Pads sold separately.
E. 42638-00A Fits ’87-’99 FLSTC, FLSTS,
FLSTF and FLSTN models,
and ’97-later FLHT, FLHTC/I,
FLHTCUI, FLHR/I, FLHRCI,
FLTR/I models.
F. 42640-00 Fits ’00-later FLSTC, FLSTF
and FLSTS models.
$159.95
$159.95
D. BILLET STYLE REAR BRAKE LEVER
E. BILLET STYLE REAR BRAKE LEVER
F. BILLET STYLE REAR BRAKE LEVER
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 308
Price Non-Price Common
308
Softail
Heel Rests, Levers and Covers
A. RIDER FOOTPEG HEEL RESTS
FOR FORWARD CONTROLS
Give your feet a rest while you’re stretching out on
your forward controls. These adjustable billet-style
rider footpeg heel rests reduce fatigue and make you
look as good as you feel. Just add a pair of matching
shifter pegs as heel rests to complete the custom
look. (sold separately)
4
2
1. 50227-01 Fits ’93-’02 FXDWG and ’89-later
FX Softail models. Also fits Dyna
models equipped with Forward
Control Kit P/N 49080-93 and late
’87-’99 FXSTS and FXSTC models
equipped with Extended Reach Forward
Control Kit P/N 49163-91.
$109.95
Shown with:
BILLET STYLE SHIFT LEVER
Styled to complement our Billet Style mirror stems,
these Billet Style Shift Levers are forged from 6061T6 aluminium, then machine-finished and chromeplated for a beautiful, custom look. Includes chrome
hardware.
2. 34539-00 Fits ’91-later Dyna and
’90-later FX Softail models.
$79.95
Wide Band Billet Footpeg and Shifter Peg
3. 50986-99 Small Diameter
Billet Footpegs. (pair)
$79.95
4. 49256-99 Billet Shifter Peg.
$16.95
Also shown with:
BILLET STYLE BRAKE
PEDAL PAD – WIDE BAND
5. 42626-00 Small.
Fits ’84-later FXST,
FXSTS, FXSTB models and
’93-later FXDWG models.
1
3
5
$38.50
B. CHROME FORWARD CONTROL BRACKETS
Check out these new forward control brackets. We’ve
taken the Original Equipment black painted components to insure product quality, and polished and
chrome-plated them for a great look. Kit includes new
bushings.
33920-00
3
4
Fits ’00-later FX Softail models. $219.95
1
C. BILLET FRONT AXLE NUT COVERS
These polished and chrome-plated Billet Front Axle
Nut Covers are styled to match H-D Billet Style Hand
Grips and Footpegs. Machined from premium 6061-T6
aluminium, the dramatic knurling and black bands
offer a clean custom look. Sold in pairs.
43388-01
Fits ’80 -’99 Touring models,
’84-later Softail models (except
FXSTD, and Springer models),
and ’95-later FXDWG models.
4
A. RIDER FOOTPEG HEEL RESTS FOR FORWARD CONTROLS
$39.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. CHROME FORWARD CONTROL BRACKETS
C. BILLET FRONT AXLE NUT COVERS
14287
VSA Partners
Harley-Davidson
Page 309
Price Non-Price Common
309
Softail
Extended Reach Kits and Heel Rests
D. EXTENDED REACH BRAKE PEDAL KIT
A comfortable reach for any foot, this pedal allows
extra room for your foot on the floorboard. Stock on
’02-later FL Softail and Touring models, the kit
includes Original Equipment Rubber Brake Pedal Pad.
42676-02
Fits ’87-’99 FLST models
and all ’97-’01 Touring models.
(Cannot be used with Softail Soft
Lowers P/N 58562-96.)
$119.95
Shown with:
CHROME AND RUBBER FL BRAKE PEDAL PAD
Chrome and rubber both have their distinct places in
the world of motorcycle styling. It seemed natural to
bring the two together to create this unique collection.
Bolt-on easy. Patent applied for.
Fits ’80-later FLHT, FLT, FLTR, FLHR, FLHS and
’86-later FLSTC, FLSTN, FLSTF, FLSTS models.
42478-95
3-Slot. Horizontal.
$31.95
E. EXTENDED REACH FORWARD
CONTROL KIT*
Extends the rider control pegs a full 3 inches forward of
their stock position. This comprehensive kit includes
black powder-coated shifter and brake mounting
plates, chrome shift rod, chrome shift rod lever, rear
brake hose, all necessary hardware, and installation
instructions. This kit requires reuse of stock, Original
Equipment footpegs, brake pedal, and shifter lever.
1
*WARNING: Installation of this kit may affect
cornering clearance. This could distract the
rider, causing loss of control, resulting in death
or serious injury.
49163-91
Fits late ’87-’99 FXSTS and
FXSTC models (will not fit when Softail
Dual Fishtail Exhaust System P/N 6528192B or Dual Exhaust System
P/N 65281-96 is installed).
$169.95
NOTE: Installation of engine guard**, when Forward
Control Kit is installed, requires FLSTC Engine Guard
P/N 49004-90 and Adapter Bracket Kit P/N 49164-93
listed below.
Engine Guard Adapter Bracket Kit (not shown)
Required to install Chrome Engine Guard P/N 4900490 on FXSTC, FXST models equipped with Extended
Reach Forward Control Kit P/N 49163-91. Includes
adapter bracket, spacers, hardware, and instructions.
49164-93
1
D. EXTENDED REACH BRAKE PEDAL KIT
Fits late ’87-’99 FXSTS,
FXSTC models equipped
with Extended Reach Forward
Control Kit P/N 49163-91.
$57.95
**WARNING: These guards may provide limited leg and cosmetic vehicle protection under
unique circumstances (fall over while stopped,
very low speed slide). They are not made nor
intended to provide protection from bodily
injury in a collision with another vehicle or any
other object.
F. AIRFOIL HEEL RESTS
Designed to complement H-D Airfoil Footpegs, these
Airfoil Heel Rests help reduce rider fatigue on a long
trip, and add a touch of style around town.
50281-01
E. EXTENDED REACH FORWARD
CONTROL KIT
F. AIRFOIL HEEL RESTS
Fits ’89-later FX Softail models
and ’90-later Dyna models
(except ’03-later FXDWG).
$109.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 310
Price Non-Price Common
310
Softail
Shift Linkages
A. POLISHED SCRIPTED STAINLESS
STEEL GEARSHIFT LINKAGE
Kick your customizing into gear with a polished stainless steel gear shift linkage. Featuring aircraft quality
rod ends, a stainless steel transmission cover and
decorative acorn nuts for maximum custom effect.
The polished stainless steel finish won’t chip, peel or
discolour. Easy to install.
“Softail” Scripted
33852-02
Fits ’86-later Softail models
(except ’99-earlier FLSTS models or
models equipped with Softail Dual
Exhaust P/N 65281-96).
$159.95
“Deuce” Scripted
33853-02
Fits ’86-later Softail models
(except ’99-earlier FLSTS models or
models equipped with Softail Dual
Exhaust P/N 65281-96).
$159.95
“Fat Boy” Scripted
33854-02
Fits ’86-later Softail models
(except ’99-earlier FLSTS models or
models equipped with Softail Dual
Exhaust P/N 65281-96).
$159.95
A. POLISHED SCRIPTED STAINLESS STEEL GEARSHIFT LINKAGE
“Springer” Scripted
33855-02
Fits ’86-later Softail models
(except ’99-earlier FLSTS models or
models equipped with Softail Dual
Exhaust P/N 65281-96).
$159.95
B. BULLET POLISHED STAINLESS
STEEL GEARSHIFT LINKAGE
Kick your customizing into gear with this collection of
high quality, polished stainless steel shift linkages. The
linkages feature aircraft quality rod ends, a stainless
steel transmission lever cover and decorative acorn
nuts and bolts for a complete custom look. The polished stainless steel finish will last without chipping,
peeling or discolouring. Easy to install.
34604-02
Fits ’86-later Softail and
Touring models, ’94-later
FLHR models with stock
foot controls. (Does not fit
’99 and earlier FLSTS models
or models with Softail Dual
Exhaust P/N 65281-96.)
$164.95
A. POLISHED SCRIPTED STAINLESS STEEL GEARSHIFT LINKAGE
NEW
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. BULLET POLISHED STAINLESS STEEL GEARSHIFT LINKAGE
14287
VSA Partners
Harley-Davidson
Page 311
Price Non-Price Common
311
NEW
Softail
Shift Linkages and Stands
C. POLISHED STAINLESS STEEL
GEARSHIFT LINKAGES
Kick your customizing into gear with this collection of
high-quality, polished stainless steel shift linkages.
Available in a variety of designs, the linkages feature
aircraft quality rod ends, a stainless steel transmission
lever cover and decorative acorn nuts and bolts for a
complete custom look. The polished, stainless steel
finish will last without chipping, peeling or discolouring. Easy to install.
1
2
Polished Stainless Steel Shift Linkages
for Softail and Touring Models
Fits ’86-later Softail and Touring models, ’94-later
FLHR models with stock foot controls. (Does not fit
’99 and earlier FLSTS models or models with Softail
Dual Exhaust P/N 65281-96.)
3
1.
2.
3.
4.
5.
6.
7.
8.
4
5
33840-02
33801-02
33821-98A
33819-98A
33817-98A
33814-98A
33762-98A
33760-98A
Flame.
Scripted.
Diamond.
Hex.
Twisted.
Round.
Ball-Milled with Bar & Shield.
Slotted with Bar & Shield.
$199.95
$159.95
$126.95
$126.95
$108.95
$86.95
$162.95
$162.95
Polished Stainless Steel Shift Linkages
for Heritage Springer (not shown)
33816-98
Round.
6
Fits ’97-’99 FLSTS models.
$102.95
D. JIFFY STAND EXTENSION KIT
This kit has been redesigned to add convenience
and style to our existing jiffy stand. Polished and
chrome-plated, it installs easily and includes all
chrome hardware.
7
50233-00
8
Fits ’84-later FLT, FLHT, FLHS,
FLHR and FLHRC; ’98-later FLTR
and all ’86-later Softail models. $39.95
E. JIFFY STAND STRAP AND FASTENER KIT
A beautiful way to accent your chrome jiffy stand.
Manufactured from Original Equipment components,
the locking strap is polished and chrome-plated to a
mirror shine. The kit includes a chrome acorn nut and
washer for a finishing touch.
50306-02
Fits ’89-later Softail models.
$19.95
C. POLISHED STAINLESS STEEL GEARSHIFT LINKAGES
NEW
D. JIFFY STAND EXTENSION KIT
E. JIFFY STAND STRAP AND FASTENER KIT
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 312
Price Non-Price Common
312
Softail
Chrome Covers
A. REAR MASTER CYLINDER COVER
Chrome-plated steel cover. Custom moulded rubber
retainer allows for easy installation and removal.
45665-01
Fits ’00-later Softail models
(except FLSTC, FLSTF, FLSTS). $39.95
B. CHROME MASTER
CYLINDER COVER – REAR
An easy way to add chrome to your bike is with this
chrome-plated version of the stock master cylinder
cover.
45149-99A
Fits all ’00-later Softail and
’99-later Touring models.
$29.95
C. FL SOFTAIL GEARSHIFT CONTROL COVER
Sweeping radii and chrome-plating give this gear shift
control cover distinctive styling. Designed for easy
installation. From the workshop of Wyatt Fuller.
33616-96
Fits ’87-’99 FLSTF, FLSTN,
FLSTC and FLSTS models.
$59.95
A. REAR MASTER CYLINDER COVER
B. CHROME MASTER
CYLINDER COVER – REAR
C. FL SOFTAIL GEARSHIFT CONTROL COVER
D. FL SOFTAIL GEARSHIFT
CONTROL COVER KIT
E. FL SOFTAIL REAR MASTER
CYLINDER COVER
F. FL SOFTAIL REAR
MASTER CYLINDER COVER
D. FL SOFTAIL GEAR SHIFT
CONTROL COVER KIT
Sweeping radii lines and chrome-plating give this gear
shift control cover distinctive styling. Designed for
easy installation. From the workshop of Wyatt Fuller.
(Shown without toe-shift lever for clarity.)
33825-00
Fits ’00-later FL Softail models.
$59.95
E. FL SOFTAIL REAR MASTER
CYLINDER COVER
The distinctive styling of our Gear Shift Control Cover
P/N 33616-96 carried over to this chrome-plated rear
cylinder cover. Easy installation. Another product from
the workshop of Wyatt Fuller.
41760-97
Fits ’87-’99 FLSTF, FLSTN,
FLSTC and FLSTS models.
$59.95
F. FL SOFTAIL REAR MASTER
CYLINDER COVER
The distinctive styling of our Gear Shift Control Cover
P/N 33825-00 is carried over to this chrome-plated
rear master cylinder cover. Designed for easy installation. From the workshop of Wyatt Fuller.
41815-00
Fits ’00-later FL Softail models.
$59.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 313
Price Non-Price Common
313
Softail
Footboards and Insert Kits
G. SOFTAIL PASSENGER FOOTBOARD KITS
Convenient bolt-on installation. Includes specially
designed mounting stud/brackets for proper installation. Footboards fold up when not in use. Kit includes
aluminium footboards, rubber pads, mounting hardware and installation instruction.
NOTE: Passenger footboard kits cannot be used with
Pivot Bolt Covers P/Ns 43462-00, 43468-00 or
43469-00.
50602-00
Fits ’00-later Softail models (except
FLSTS, FLSTF and FXSTD). FLSTC models require
Saddlebag Bracket Relocation Kit P/N 90238-00.$
50602-89B Fits ’86-’99 Softail models
(except FLSTS, FLSTF and FLSTN). NOTE: ’90-’99
FLSTC models require Saddlebag Bracket Relocation
Kit P/N 90345-90A.
$186.95
Heritage Springer Passenger Footboard Kit
(not shown)
50955-00
Fits ’00-later FLSTS models.
$204.95
50955-97A Fits ’97-’99 FLSTS models.
$203.95
G. SOFTAIL PASSENGER FOOTBOARD KITS
H. NOSTALGIC RIDER
FOOTBOARD INSERT KIT
Quick, easy replacement of stock Rubber Footboard
Insert. Made from stamped chrome-plated steel and
high-durability rubber. Retains cast-in vibration isolation found in stock Footboard Inserts. Kit includes left
and right insert. Patent applied for.
50187-96
Fits ’80-later FLHT, FLT,
FLTR, FLHR, FLHS and
’86-later FLSTC, FLSTN, FLSTF
and FLSTS models. (pair)
$92.95
Shown with:
NOSTALGIC BRAKE PEDAL PAD
44248-96
Fits ’80-later FLHT, FLT,
FLHR, FLHS and ’86-later FLSTC,
FLSTN, FLSTF and FLSTS
models. Patent applied for.
$34.95
I. NOSTALGIC PASSENGER
FOOTBOARD INSERT KIT
Quick, easy replacement of stock Rubber Footboard
Insert. Made from stamped chrome-plated steel and
high-durability rubber. Retains cast-in vibration isolation found in stock Footboard Inserts. Kit includes left
and right insert. Patent applied for.
H. NOSTALGIC RIDER
FOOTBOARD INSERT KIT
I. NOSTALGIC PASSENGER
FOOTBOARD INSERT KIT
50190-96
Fits ’86-later FLHT, FLT, FLTR, FLHR,
FLHS and ’86-later Softail models equipped
with H-D Accessory Passenger Footboard
Kit P/Ns 50602-89B, 50955-97A, 50602-00,
or 50955-00. Compatible with Chrome
Passenger Footboard Covers. (pair)
$84.95
J. CHROME AND RUBBER
RIDER FOOTBOARD INSERT KIT
Quick, easy replacement of stock Rubber Footboard
Insert. Made from stamped chrome-plated steel and
high-durability rubber. Retains cast-in vibration isolation found in stock Footboard Inserts. Kit includes left
and right insert. Patent applied for.
50176-95
Slotted. Fits ’80-later FLHT,
FLT, FLHR, FLTR, FLHS and ’86-later FLSTC,
FLSTN, FLSTF, FLSTS models. (pair)
$92.95
Shown with:
CHROME AND RUBBER FL BRAKE PEDAL PAD
42478-95
Fits ’80-later FLHT, FLT,
FLTR, FLHR, FLHS and ’86-later FLSTC,
FLSTN, FLSTF, FLSTS models.
$31.95
K. CHROME AND RUBBER
PASSENGER FOOTBOARD INSERT KIT
Quick, easy replacement of stock Rubber Footboard
Insert. Made from stamped chrome-plated steel and
high-durability rubber. Retains cast-in vibration isolation found in stock Footboard Inserts. Kit includes left
and right insert. Patent applied for.
J. CHROME AND RUBBER
RIDER FOOTBOARD INSERT KIT
K. CHROME AND RUBBER PASSENGER
FOOTBOARD INSERT KIT
50177-95
Slotted. Fits ’86-later FLHT, FLT,
FLHR, FLTR, FLHS and ’86-later Softail models
equipped with H-D Accessory Passenger Footboard Kit
P/N 50602-89B, P/N 50955-97A, 50602-00, or 5095500. Compatible with Chrome Passenger Footboard
Covers. (pair) $84.95
14287
VSA Partners
Harley-Davidson
Page 314
Price Non-Price Common
314
Softail
Footboard Covers & Fender Skirts
A. V-LOGO PASSENGER FOOTBOARD COVERS
V-Logos are die-cast aluminium integrated with the
cover, then chrome-plated for a desirable shine.
Includes all mounting hardware.
50194-96
Fits Touring models with stock
aluminium passenger footboards. Fits
’86-later FL Softail models equipped
with P/Ns 50602-00, 50955-00, 5060289B and 50955-97A; ’87-later FLT,
FLHT, ’94-later FLHR, and FLHRC;
’98-later FLTR models.
$64.95
B. V-LOGO FENDER SKIRT
V-Logos are die-cast aluminium integrated with the
fender skirt, then chrome-plated for a desirable shine.
Includes all mounting hardware.
59146-96
Fits ’80-later FLT, FLHT, FLHS,
FLHR, ’98-later FLTR and ’86-later
FLSTC and FLSTN models.
(Does not fit FLSTS.)
$52.95
C. CONCHO FOOTBOARD COVERS
A. V-LOGO PASSENGER FOOTBOARD COVERS
B. V-LOGO FENDER SKIRT
C. CONCHO FOOTBOARD COVERS
D. CONCHO FENDER SKIRT
E. CHROME PASSENGER FOOTBOARD COVERS
F. CHROME FRONT FENDER SKIRT
Heritage Softail Classic-inspired conchos make these
covers look great whether footboards are up
or down.
50193-96
Fits Touring models with stock
aluminium passenger footboards.
Fits ’86-later FL Softail models
equipped with P/Ns 50602-00,
50955-00, 50602-89B and
50955-97A; ’87-later FLT, FLHT,
’94-later FLHR, and FLHRC;
’98-later FLTR models.
$64.95
D. CONCHO FENDER SKIRT
This decorative fender skirt features conchos inspired
by the Heritage Softail Classic.
59147-96
Fits ’80-later FLT, FLHT, FLHS,
FLHR, ’98-later FLTR and ’86-later
FLSTC and FLSTN models.
(Does not fit FLSTS.)
$49.95
E. CHROME PASSENGER
FOOTBOARD COVERS
Easy installation using chrome hardware. (Shown
with Softail Leather Tool Box, not available on Touring
models.)
50782-91
Fits Touring models with stock
aluminium passenger footboards.
Fits ’86-later FL Softail models
equipped with P/Ns 50602-00,
50955-00, 50602-89B and
50955-97A; ’87-later FLT, FLHT,
’94-later FLHR, and FLHRC;
’98-later FLTR models.
$57.95
F. CHROME FRONT FENDER SKIRT
This rigid-steel fender skirt, designed to replace the
original factory-equipped aluminium trim, is formed,
polished, and chrome-plated. Its ribbed pattern offers
a unique styling element and adds rigidity. Subtle but
distinctive brushed aluminium Bar & Shield logos are
framed by a stamped-in ribbed outline on both sides.
59228-91
Fits ’80-later FLT, FLHT,
FLHS, FLHR, ’98-later FLTR and
’86-later FLSTC and FLSTN
models. (Does not fit FLSTS.)
$45.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 315
Price Non-Price Common
315
Softail
Fender Skirts and Tips
G. ROAD KING CLASSIC FENDER SKIRT
The latest in the family of Road King-inspired accessories, this chrome-plated steel fender skirt features
four raised accent ribs and a die-cast Road King
Classic medallion in chrome with black accents.
Mounting hardware included.
59005-98
Fits ’98-later FLHR, FLHRCI
and FLHT models.
$52.95
H. ROAD KING CLASSIC
PASSENGER FOOTBOARD COVERS
The latest in the family of Road King Classic inspired
accessories, this chrome-plated steel footboard cover
features a chrome die-cast Road King Classic medallion with black accents and a stylish leather accent
piece. Mounting hardware included.
50246-00
G. ROAD KING CLASSIC FENDER SKIRT
H. ROAD KING CLASSIC PASSENGER
FOOTBOARD COVERS
Fits ’86-later FL Softail models
equipped with Softail Passenger
Footboard Kits P/Ns 50602-00, 5095500, 50602-89B or 50955-97A; ’87-later
FLT, FLHT; ’94-later FLHR and
FLHRC; ’98-later FLTR models. $69.95
I. SKULL FRONT FENDER SKIRT
This decorative chrome-plated fender skirt is a direct
replacement for stock fender skirt. Features a threedimensional sculptured concho with skull design set
off with black accents. Mounting hardware included.
59582-02
Fits ’80-later Touring models
and ’86-later FLSTC and
FLSTN models.
$52.95
J. FENDER TIP LENS KIT
WITH SKULL LOGO
This chrome-plated fender tip lens kit adds a little
attitude to your ride. The kit features front and rear
lenses with a translucent illuminated skull silhouette.
The easy to install kit includes an amber front lens and
red rear lens.
59651-01
Fits ’80-later Electra Glide,
Tour Glide, FLHS, Road King
(except Road King Classic),
and ’86-later FLSTC and
FLSTN models.
$23.95
K. BAR & SHIELD CHROME
FENDER TIP LENS KIT
Chrome-plated polycarbonate construction features
translucent Bar & Shield emblems. The kit includes
front and rear lenses. Front lens features an amber Bar
& Shield, rear lens features a red Bar & Shield. Quick
and easy installation.
I. SKULL FRONT FENDER SKIRT
J. FENDER TIP LENS KIT WITH SKULL LOGO
59081-96
Front and Rear.
Fits ’80-later FLHT, FLT,
FLHS, FLHR models and ’86-later
FLSTC, FLSTN models.
(Does not fit FLSTS or FLTR.)
$23.95
L. FLAMES FENDER TIPS
Made of durable ABS plastic. Includes mounting hardware and installation instructions.
Fits ’80-later FLT, FLHR, FLSTC and FLSTN models
(replaces front fender lamp assembly). (Does not fit
FLSTS or FLTR.)
59348-98
59315-98
K. BAR & SHIELD CHROME FENDER
TIP LENS KIT
L. FLAMES FENDER TIPS
Front.
Rear. (not shown)
$29.95
$29.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 316
Price Non-Price Common
316
Softail
Fender Tips
A. HERITAGE SPRINGER FENDER TIPS
These die-cast nostalgic fender tips feature an
engraved Bar & Shield and brilliant chrome-plating,
sure to enhance the appearance of your FLSTS coming and going. Looks great with Leather Mud Flaps
with Fringe P/Ns 59027-99 (Black), 59027-98
(Midnight Red), 59345-97 (Red), and 59346-97 (Blue).
59218-97
59895-97
Front.
Fits ’97-later FLSTS models.
Rear. (not shown)
Fits ’97-later FLSTS models.
$29.95
$29.95
B. H-D CLASSIC FENDER TIPS
Stock on Road King Classic models, these nostalgiclook fender tips are also available for other models.
Replaces fender lamp assembly.
Front fits ’80-later FL and FLHR models, and ’86later FLSTC models. Rear fits ’80-later FL and FLHR
models, and ’86-’99 FLSTC models (except FLSTF
and FLTR).
59002-98
59052-98
Front.
Rear. (not shown)
$30.00
$31.40
A. HERITAGE SPRINGER FENDER TIPS
B. H-D CLASSIC FENDER TIPS
C. V-WING FENDER TIPS
D. “LIVE TO RIDE” FENDER TIPS
C. V-WING FENDER TIPS
Look great whether you’re coming or going. Includes
mounting hardware.
Fits ’80-later FLT, FLHR, FLSTC, and FLSTN models.
(P/N 59333-97 replaces front fender lamp assembly
and P/N 59334-97 replaces rear fender lamp assembly.) (Does not fit FLTR or FLSTS.)
59333-97
59334-97
Front.
Rear. (not shown)
$29.95
$29.95
D. “LIVE TO RIDE” FENDER TIPS
Made of durable ABS plastic. Includes mounting hardware and installation instructions.
Fits ’80-later FLT, FLHR, FLSTC and FLSTN models
(replaces fender lamp assembly). (Does not fit FLSTS
and FLTR models.)
Front Fender Tip
59068-96
Chrome with Gold.
$27.95
Rear Fender Tips (not shown)
59069-96
Chrome with Gold.
59320-96
Chrome.
$27.95
$17.95
E. FAT BOY EAGLE WING FENDER TRIM
Classic Eagle Wing logo available in chrome or twotone chrome and gold with black accent. Matches
Eagle Wing headlamp, taillamp and turn signal visors.
Fits ’90-later FLSTF models.
1. 59369-97
59368-97
2. 59367-97
59366-97
Rear. Gold two-tone.
Rear. Chrome.
Front. Gold two-tone.
Front. Chrome.
$29.95
$19.95
$29.95
$19.95
F. FAT BOY EAGLE FENDER TRIM
Two-tone chrome and gold-plated. This solid brass
rear fender trim is hand-polished. Features finely
detailed Eagle and “Harley-Davidson” graphics.
Includes mounting hardware and foam pad attached to
underside of trim to resist scratches when installing.
Fits ’90-later FLSTF models.
1. 59285-90
59318-96
2. 59286-90
59317-96
Front. Chrome
Front. Gold two-tone
Rear. Chrome
Rear. Gold two-tone
1
1
$19.95
$29.95
$19.95
$29.95
2
2
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
E. FAT BOY EAGLE WING FENDER TRIM
F. FAT BOY EAGLE FENDER TRIM
14287
VSA Partners
Harley-Davidson
Page 317
Price Non-Price Common
317
Softail
Fender Rails
G. TEARDROP FRONT
FORK ROCKER COVERS
Nostalgic chrome-plated styling that seems to be in
constant motion. Easily installs on Heritage Springer
without removing wheel. Patent applied for.
43161-97
Fits ’97-later FLSTS models.
$64.95
H. FRONT FENDER RAILS*
AND STANCHION KIT
Chrome-plated accents straight from our 1947
catalogue. Includes template for easy installation.
Patent applied for.
91117-97
Fits ’97-later FLSTS, ’84-later
FLSTC, FLSTN, FLHT, ’94-later
FLHR, FLHRC, ’98-later FLTR
models and sidecar fenders.
$69.95
I. HERITAGE SPRINGER
CHROME BUMPER AND FIN KIT*
Styled after the Super Deluxe Bumper King from the
1950’s H-D accessories catalogue. Constructed of
lightweight aluminium fins, rails, and stanchions, and
a steel bumper, all brilliantly chrome-plated.
G. TEARDROP FRONT FORK ROCKER COVERS
91235-97
Fits ’97-later FLSTS models.
$225.00
J. HERITAGE CHROME
FRONT FENDER RAIL*
A stylish re-creation of a popular Hydra Glide accessory direct from the Harley-Davidson 1959 accessories catalogue. Ornate, jet, twin-tube design
sweeps smartly back along the front fender. Sparkling
chrome-plating and years-ahead styling make it a hit
for all Heritage and FLSTN owners.
91080-93
Fits ’87-later FLST,
FLSTC, and FLSTN models.
(Does not fit FLSTS.)
$91.95
K. HERITAGE CHROME
REAR FENDER RAIL*
A perfect match to Heritage Chrome Front Fender Rail
P/N 91080-93. Designed to fit with stock FLSTC,
FLSTN saddlebags or Genuine Harley-Davidson Fat
Boy leather saddlebags.
91402-00
91081-93
1
H. FRONT FENDER RAILS AND
STANCHION KIT
I. HERITAGE SPRINGER CHROME
BUMPER AND FIN KIT
J. HERITAGE CHROME FRONT FENDER RAIL
K. HERITAGE CHROME REAR FENDER RAIL
Fits ’00-later FLSTC models.
Fits ’87-’99 FLSTC, FLSTN
models. (Does not fit FLSTS.)
$98.95
$91.95
*WARNING: Fender rails are decorative items
only. Do not strap anything to the rails. Adding
any additional weight to the front fender could
adversely affect vehicle handling, causing loss
of control and death or serious injury.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 318
Price Non-Price Common
318
Softail
Engine Guards
A. CHROME FRONT ENGINE GUARD KITS*
49004-00
Fits ’00-later FLSTC, FLSTS
and FLSTF models.
$179.95
Fits ’00-later FXST, FXSTB,
49016-00
FXSTS and FXSTD models.
$179.95
Fits ’86-’99 FLST,
49004-90
FLSTC, FLSTF, FLSTN
and FLSTS models.
$179.95
49016-72D Fits ’84-’99 FXST, FXSTC,
FXSTS, FXSTSB ’80-’86 FXWG,
and ’72-’85 FX models (except
models equipped with
Harley-Davidson Extended
Reach Forward Controls).
(Does not fit FLSTS.)
$179.95
B. GLOSS BLACK ENGINE GUARD KIT*
A serious finish for serious riders. Before a black powder coat, these engine guards get an extra layer of
protection from an E-Coat dip. So go on and install
Engine Guard Mount Footpegs, because this finish
will go the distance.
49023-02
49024-02
Fits ’00-later FXSTS, FLSTS
and FLSTF models.
Fits ’00-later FXST, FXSTB,
FXSTS and FXSTD models.
$169.95
$149.95
A. CHROME FRONT ENGINE GUARD KITS
1
*WARNING: These guards may provide limited
leg and cosmetic vehicle protection under
unique circumstances (fall over while stopped,
very low speed slide). They are not made nor
intended to provide protection from bodily injury
in a collision with another vehicle or any other
object.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. GLOSS BLACK ENGINE GUARD KIT
14287
VSA Partners
Harley-Davidson
Page 319
Price Non-Price Common
319
Softail
Saddlebag Guards
C. CHROME REAR SADDLEBAG GUARDS*
Saddlebag guards provide a style borrowed from the
past that makes a unique statement here and now.
Includes mounting hardware and instructions.
49261-00
49158-89D
Fits ’00-later Softail models
except FXSTD, and FLSTF. ’00-later
FLSTC models require Saddlebag
Relocation Kit P/N 90238-00. $179.95
Fits ’86-’99 Softail models.
(except FLSTF, FLSTN and
FLSTS models).
$174.95
GLOSS BLACK REAR SADDLEBAG
GUARD KIT (not shown)
49269-02
Fits ’00-later Softail
models (except FXSTD,
FLSTF and FLSTS). ’00-later
FLSTC models require Saddlebag
Relocation Kit P/N 90238-00. $169.95
D. HERITAGE SPRINGER
REAR SADDLEBAG GUARD KIT*
Inspired by the nostalgic look of the 50s, these classic
looking dresser bars capture the magic of an era gone
by. Take a ride back in time with these unique bars,
styled by Willie G. exclusively for the Heritage Springer.
Bars are entirely chrome-plated. Includes mounting
hardware. Requires saddlebag bracket relocation kit.
49258-00A
49225-97
Fits ’00-later FLSTS
models. Requires the separate
purchase of Saddlebag
Relocation Kit P/N 90238-00. $179.95
Fits ’97-’99 FLSTS models.
$179.95
SADDLEBAG BRACKET RELOCATION KIT
(not shown)
C. CHROME REAR SADDLEBAG GUARDS
Required for installation of FLSTS Rear Saddlebag
Guards P/Ns 49258-00 and 49225-97 and FLSTC
Rear Saddlebag Guard P/N 49261-00.
90238-00
90345-90A
1
D. HERITAGE SPRINGER REAR SADDLEBAG GUARD KIT
Fits ’00-later FLSTS models.
Fits ’97-’99 FLSTS models.
$10.99
$7.95
*WARNING: These guards may provide limited
leg and cosmetic vehicle protection under
unique circumstances (fall over while stopped,
very low speed slide). They are not made nor
intended to provide protection from bodily injury
in a collision with another vehicle or any other
object.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 320
Price Non-Price Common
320
Softail
Braided Lines and Handlebar Kits
A. FRONT STAINLESS STEEL
BRAIDED BRAKE LINES
Stylish stainless steel lines, with chrome-plated banjo
ends, are custom fit to particular model applications.
They meet all DOT requirements and include all
necessary hardware. Kits for dual disc models consist
of three brake lines with a chrome-plated junction tee,
while single disc models consist of a single line.
46011-01
44813-00A
44815-00A
45206-97B
45208-97B
45209-97B
45210-97B
45264-98B
Fits ’00-later FLSTC
and FLSTF models.
Fits ’99-later FXST
Softail Standard.
Fits ’00-later FXSTD
models (except FXSTD2).
Fits ’84-’99 FXSTC and
’93-later FXDWG models.
Fits ’88-later FXSTS models.
Fits ’95-’97 FXSTSB and
’97-later FLSTS models.
Fits ’87-’99 FLSTC and ’90-later
FLSTF, FLSTN models.
Fits ’99-later FXSTB.
$61.95
$61.95
$61.95
$53.95
$61.95
$61.95
$61.95
$61.95
A. FRONT STAINLESS STEEL
BRAIDED BRAKE LINES
B. REAR STAINLESS STEEL
BRAIDED BRAKE LINES
C. BRAIDED STAINLESS STEEL
FUEL CROSSOVER LINE
D. SCRIPTED HAND LEVER INSERT
B. REAR STAINLESS STEEL
BRAIDED BRAKE LINES
Add extra shine to the rear of your Softail with a
braided stainless steel brake line. It’s DOT approved,
custom fitted, for Softail models, and includes all
necessary hardware. Looks great when installed with
a chrome swingarm.
44803-00A
44802-99B
44803-99B
Fits all ’00-later Softail
models (except FXSTD2).
Fits ’87-’99 FLSTC and
’90-’99 FLSTF models.
Fits ’89-’99 FXSTC and
FXSTS models, ’95 -’97 FXSTB
models, and ’99 FXST and
FXSTB models.
$88.95
$53.95
$53.95
C. BRAIDED STAINLESS STEEL
FUEL CROSSOVER LINE
A beautifully braided, stainless steel fuel line accented
with highly-polished chrome fittings for your front fuel
tank crossover. Innovative fittings are designed to
eliminate unsightly hose clamps.
63692-00A
63694-00A
63696-00A
Fits ’00-later Softail
models (except FXSTD).
Fits ’00-later FXSTD models.
Fits ’86-’99 Softail models.
$29.95
$29.95
$34.95
D. SCRIPTED HAND LEVER INSERT
Let the citizens know what you are riding. These satinfinished Hand Lever Inserts allow you to personalise
the controls to your individual model. The easy-toinstall inserts fit the slotted Custom Hand Control
Levers P/N 45459-02 and 45533-02, and are the ideal
complement to our Scripted Shift Linkages.
Fit models equipped with Custom Hand Control
Levers P/Ns 45533-02 and 45459-02.
44529-02
44518-02
44535-02
44537-02
“Softail” Script. (pair)
“Deuce” Script. (pair)
“Fat Boy” Script. (pair)
“Springer” Script. (pair)
$7.95
$7.95
$7.95
$7.95
E. DRAG BAR KIT
Get that custom cruiser look that only flat bars can
provide. Kit includes the 6" tall chrome risers, straight
handlebar, front turn signal brackets, and necessary
cables.
56434-98A
Fits ’96-later FXST,
FXSTC models. Handlebars
and risers are stock on
’98-later FXSTB models.
$253.99
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
E. DRAG BAR KIT
14287
VSA Partners
Harley-Davidson
Page 321
Price Non-Price Common
321
Softail
Riser and Braided Cable Kits
F. PULLBACK RISER AND HANDLEBAR KIT
Add the big and beefy look of the Softail Deuce front
end to your Softail with this riser and handlebar kit. Kit
includes handlebar, risers, clutch cable, brake line,
and all necessary hardware.
56034-00
Fits ’00-later FX Softail models.
Does not fit Softail models
equipped with Springer front
ends. Stock on FXSTD.
$249.95
G. STAINLESS STEEL BRAIDED
CLUTCH CABLE KIT
Go from stock to custom styling with this braided
stainless steel clutch cable that delivers strength,
durability and looks. A great-looking replacement for
the Original Equipment black cable.
38674-00
Fits ’00-later Softail models
(except FXSTB/I) and ’99-later
Dyna models (except FXDWG).
$99.00
Shown with:
F. PULLBACK RISER AND HANDLEBAR KIT
STAINLESS STEEL BRAIDED
THROTTLE & IDLE CONTROL CABLE KIT
Get custom looks and Harley toughness by upgrading
your Original Equipment black cables to braided
stainless steel.
56344-00
Fits ’96-later Softail models
(except FXSTB and FXSTS
models) and ’99-later Dyna
models (except FXDWG).
$118.95
H. BEACH BAR HANDLEBARS
FOR HERITAGE CLASSIC MODELS
These beefy 1-1/4" bars show off your FLSTC in
style! These fat bars allow you to tuck the wires
inside the bar for a clean, custom appearance, and
the highly-polished and chrome-plated bar will get
you noticed. The kit includes chrome handlebar
clamp, risers, braided brakeline and all necessary
mounting hardware.
56364-02
Fits ’00-later FLSTC models.
(Does not fit with Softail
Nacelle Kit P/N 67907-96.)
$429.00
G. STAINLESS STEEL BRAIDED CLUTCH CABLE KIT AND THROTTLE & IDLE CONTROL CABLE KIT
H. BEACH BAR HANDLEBARS FOR HERITAGE CLASSIC MODELS
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 322
Price Non-Price Common
322
Softail
Headlight and Passing Lamp Kits
A. HALOGEN FOG LAMP KIT
Create a new, distinctive look for the front end of your
Softail with these auxiliary European-style Halogen
Fog Lamps. Enjoy bright balanced light that complements your Halogen Headlight. Distinctive reflective
inner domes add new character to your front end.
Legal in all markets. A halogen fog lamp upgrade is
available (P/N 68208-98, sold separately.)
68278-02
68247-98
Fits ’00-later FLSTF models.
(FLSTC models are equipped
with an Original Equipment
Passing Lamp Kit.)
Fits ’86-’99 FLST, FLSTC,
FLSTF and FLSTN models.
$224.95
$224.95
NOTE: FLSTC models are equipped with an
Original Equipment passing lamp kit. A halogen fog
lamp upgrade is available (P/N 68208-98, sold
separately) for ’86-later FLSTC models.
Shown with:
CHROME HEADLIGHT NACELLE
If the chrome from this nacelle seems to reflect the
image of 1960’s FL, that’s because the spirit of the
past styling is built right in. Coupled with the separate
purchase of the Chrome Nacelle Hardware Kit (P/N
67897-96), it will work with existing H-D windshield
and/or passing lamps. Includes hardware for installation of Nacelle with detachable windshield without
passing lamp. Hardware kit is required when installing
chrome Nacelle with passing lamps or rigid mount
windshield.
67907-96
Fits ’86-later FL Softail models
(except FLSTS or FXSTS).
$389.95
Also shown with:
CHROME NACELLE HARDWARE KIT
This kit provides the additional hardware required to
install the Chrome Headlight Nacelle P/N 67907-96 on
FL Softail models that were previously equipped with
passing lamps, rigid mounted windshields or
detachable windshields.
NOTE: This kit is not required when installing windshield P/Ns 58649-97A, 58651-97A, 58652-97A and
58653-97A.
67897-96A
$45.95
B. CHROME PASSING LAMP KIT
Kit includes sealed beam auxiliary lights with chrome
housings. Chrome mounting bracket incorporates
tubular crossbar contoured to accent the headlamp.
Kit is complete with all required wiring, toggle switch,
and hardware.
68277-02
68249-86B
Fits ’00-later FLSTF models
(stock on FLSTC models).
$199.95
Fits ’86-’99 FLST, FLSTC,
FLSTF, and FLSTN models. Stock
production on FLSTC Heritage
Softail Classic models.
$199.95
A. HALOGEN FOG LAMP KIT SHOWN WITH CHROME HEADLIGHT NACELLE
C. SPRINGER PASSING LAMP KIT
Redesigned chrome mounting bracket nicely accents
Springer front end and offers a well-integrated, factory-installed appearance. Sealed beam auxiliary lamps
feature chrome housings. Kit includes wiring, switch,
hardware, and installation instructions. Designed to fit
with or without Windshield Kit P/Ns 58044-88A,
58029-89B, and Horn Kit P/N 69036-88A. Cannot be
used with Handlebar Reservoir Cover Set P/Ns
46098-98 or 46099-98.
68253-88A
Fits ’88-later FXSTS, ’95-’97 FXSTSB
and Softail models equipped with
Springer Front End Kit P/N 46007-88A.
(Does not fit FLSTS.)
$199.95
Springer Fog Lamp Kit
68248-98
Fits ’88-later FXSTS, ’95-’97
FXSTSB and Softail models equipped
with Springer Front End Kit P/N 4600788A. (Does not fit FLSTS. Cannot be
used with Handlebar Reservoir
Cover Set P/Ns 46098-98
or 46099-98.) (not shown)
$224.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. CHROME PASSING LAMP KIT
C. SPRINGER PASSING LAMP KIT
14287
VSA Partners
Harley-Davidson
Page 323
Price Non-Price Common
323
Softail
Relocation and Conversion Kits
D. TURN SIGNAL RELOCATION
KIT FOR PASSING LAMPS
Easy to install, this kit relocates the turn signals from
the handlebars to the passing lamp chrome mounting
bracket. Provides a clean look to the front end of the
motorcycle by removing wires and lights from the handlebar area. Kit includes turn signals for passing
lamps, mounting bracket and all necessary hardware.
Fits all U.S. Softail models equipped with H-D Passing
Lamp Kits P/Ns 68247-98, or 68249-86B.
68413-99
68412-99
U.S..
International.
$98.95
$98.95
E. AUXILIARY BRAKE LIGHT/TURN
SIGNAL CONVERSION KIT
Turn signal module adds an auxiliary brake light function
to your existing turn signals for auxiliary rear lighting.
Easy to install, the kit simply plugs in to your existing
wiring harness. Red turn signal lenses are included.
DOT approved. Red lenses may not be legal in all
countries. Check your local regulations.
D. TURN SIGNAL RELOCATION KIT FOR PASSING LAMPS
Bullet Lens Style
68216-00
Fits ’00-later FXSTD models.
91698-02
(Does not fit with saddlebags.)
Fits ’02-later XL, Dyna (except
FXDXT) and Softail (except
FXSTD/I) models with stock
bullet-style turn signals.
$49.95
$43.95
Flat Lens Style
91699-99A Fits all ’96-later Softail models
and ’97-later FLHT, FLHR and
FLTR models equipped with Original
Equipment flat lens style turn signals.
(Does not fit with Narrow Chrome
Directional Bar P/N 68611-98.) $43.95
F. LIGHTED CHROME DIRECTIONAL BAR
Chrome-plated bar provides a custom look with complete integration. LED light pods provide auxiliary
lighting for both brake and taillight. Patented.
NOTE: Must only be used as auxiliary lighting.
68143-98A
Fits ’86-later FLST, FLSTC
and FLSTN models; ’91-later
FLT, FLHT, FLHS, FLHR, and
’98-later FLTR models. Directional
Lamps not included.
$114.95
G. CHROME REAR
DIRECTIONAL MOUNTING BAR
E. AUXILIARY BRAKE LIGHT/TURN SIGNAL
CONVERSION KIT – BULLET LENS
E. AUXILIARY BRAKE LIGHT/TURN SIGNAL
CONVERSION KIT – FLAT LENS
Rear directional mounting bar is cast from a very
durable zinc-aluminium alloy, has been drilled and
tapped for 5/16-inch mounting fasteners and is
chrome-plated for a beautiful finish. (Lamp assemblies
and mounting fasteners not included.)
68510-74C
Fits ’86-later FLST, FLSTC,
FLSTN, and ’74-’84 FLH
models. (Does not fit FLSTS.)
$65.50
Shown with:
NARROW CHROME DIRECTIONAL BAR
Rear Directional Bar 13”
Enhance the rear profile of your Softail or Touring
model with this Narrow Chrome Directional Bar that
enhances the visual proportions of the bike. At 10
inches wide, this die-cast, chrome-plated bar is 3
inches shorter than the stock bar and features the
same great quality.
68611-98
Fits ’86-later FLST, FLSTC
and FLSTN models and ’91-later
Touring models. (Does not fit
with Flat Lens Turn Signal
Module P/N 91699-99A.)
$45.95
Narrow Bar 10”
F. LIGHTED CHROME DIRECTIONAL BAR
G. CHROME REAR DIRECTIONAL MOUNTING BAR
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 324
Price Non-Price Common
324
NEW
Softail
Speedo/Tach Kits
A. COMBINATION SPEEDOMETER/
TACHOMETER
Maintain the clean view over the handlebars. This
unique combination Speedometer/Tachometer allows
you to monitor engine speed without adding a handlebar-mounted tach. The unit mounts in the stock
dash opening, and is a direct plug-in installation on
’99 and later models. The backlit face aids night viewing, and the gauge features an easy-to-read LED
odometer/tripmeter. Mileage reinstatement available
through your dealer.
3
MPH Calibrated
74460-03
Fits ’00-later FXSTD models.
$419.95
74461-03
Fits ’95-later FLHR models and ’00-later
74473-03
Softail models (except FXSTD). ’95-’98
FLHR models require Speedo/Tach
Retrofit Kit P/N 74468-03.
$419.95
Fits ’96-’99 Softail models. ’95-’98
Softail models require Speedo/Tach
Retrofit Kit P/N 74468-03.
$419.95
KPH Calibrated
74469-03
Fits ’00-later FXSTD models.
$419.95
Fits ’95-later FLHR models and ’00-later
74471-03
74475-03
Softail models (except FXSTD). ’95-’98
FLHR models require Speedo/Tach
Retrofit Kit P/N 74468-03.
$419.95
Fits ’96-’99 Softail models. ’95-’98
Softail models require Speedo/Tach
Retrofit Kit P/N 74468-03.
$419.95
SPEEDOMETER/TACHOMETER
INSTALLATION KIT (not shown)
Allows the installation of the Harley-Davidson
Combination Speedometer/Tachometer on older
models.
74468-03
Required to install
Speedometer/Tachometer Kit
on ’95-’98 FLHR, FXDWG,
and ’96-’98 Softail models.
$46.95
B. BULLET STYLE TURN SIGNAL KIT
Add a radical touch to your bike with these Bullet
Style Turn Signals. Inspired by the Softail Deuce, this
reflector-optic bullet turn signal kit gives your bike a
whole new attitude. Kit includes housings, lenses, and
supports. Stock on most ’02 models.
68005-99
68007-99
Fits ’00-’01 Softail models
(except FLSTC), ’90-’01 Sportster
models and ’91-’01 Dyna models.
Will not fit with XL Saddlebags
P/N 90342-98A or 90598-96B.
(Stock on ’01 FXDX and FXDXT
and ’00-later FXSTD.)
$119.95
Fits ’88-’99 Softail models
(except FLSTC). (Does not fit
with detachables.)
$127.95
A. COMBINATION SPEEDOMETER/TACHOMETER
Bullet Style Turn Signal Kit – International
68637-99
Fits ’00-’01 International Softail
68690-99
models (except FLSTC),’90-’01
International Sportster models and
’91-’01 International Dyna models.
Will not fit with XL Saddlebags
P/N 90342-98A or 90598-96B.
(Stock on ’01 FXDX and FXDXT
and ’00-later FXSTD.)
$119.95
Fits ’88-’99 HDI Softail models
(except FLSTC). (Does not fit
with detachables.)
$127.95
C. CHROME TURN SIGNAL
SWIVEL ASSEMBLY KIT
Add a subtle chrome detail to match your own chrome
accessories with this swivel kit, a durable and stylish
replacement for the stock zinc-plated swivel.
68185-00
Fits ’88-later XL, FXR, Dyna and
Softail models with handlebar
mounted turn signals.
$19.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. BULLET STYLE TURN SIGNAL KIT
C. CHROME TURN SIGNAL SWIVEL
ASSEMBLY KIT
14287
VSA Partners
Harley-Davidson
Page 325
Price Non-Price Common
325
Softail
Mini Tach Kits
MINI TACHS
Add style and function with these chrome-plated,
0-8,000 RPM mini tachometers. Measuring 2-5/8
inches in diameter, these chrome-plated tachs boast
superior illumination and high-quality construction.
The hard-coated lens is both fog and scratch-resistant
and is ultrasonically welded to the case, resulting in a
strong, reliable seal.
These tach kits deliver impressive accuracy and
response. Our exclusive, balanced pointer design
allows for a quick, precise needle sweep and minimal
low idle flutter. Plus, reverse polarity and over-voltage
protection ensures these quality tachs are immune to
voltage surges, low-voltage interference and ignition
coil inductive kick-back. Tested to the highest industry standards, each kit is specifically designed for
each model, with styling that matches current
speedometer graphics, including a lighted pointer.
Complete wiring, hardware, chrome-plated bracket
and installation instructions are included. (NOTE: Mini
Tach Kits are not compatible with Windshield Bags.)
D. MINI TACH KIT, FL SOFTAIL
E. MINI TACH KIT, SOFTAIL CUSTOM
D. MINI TACH KIT – FL SOFTAIL
Installation on a FLSTC with the stock, rigid-mount
windshield requires adjustment of the windshield for
proper clearance between the tach and the windshield. ’87-’99 FLSTC models require Windshield
Bracket Kit P/N 58155-90 to regain the full-range of
adjustment. (sold separately)
67946-96A Fits ’93-later FXDWG and ’86-later
FLST, FLSTC, FLSTF, FLSTN and FXSTB Night Train .
NOTE: FL Softail models equipped with chrome
Headlight Nacelle use P/N 67943-96A.
$179.95
E. MINI TACH KIT – SOFTAIL CUSTOM
67948-96B Fits ’84-later FXST, FXSTC
models, and ’99-later FXST Softail Standard.
NOTE: P/N 67941-96B will fit FXSTD.
$179.95
F. MINI TACH KIT – SOFTAIL DEUCE
AND SPRINGER
67941-96B Fits ’00-later FXSTD (except FXSTD2),
’88-later FXSTS, FXSTSB, and FLSTS models.
NOTE: Will not fit Springer models equipped
with detachable windshields.
$179.95
G. CHROME BILLET MINI TACH
MOUNT AND HANDLEBAR CLAMP
Precision-machined chrome-plated aircraft quality
aluminium mini tach mount incorporates a ball-milled
handlebar clamp to add a custom touch to your Softail
or Dyna Wide Glide. (Mini Tach sold separately.)
F. MINI TACH KIT, SOFTAIL DEUCE
AND SPRINGER
G. CHROME BILLET MINI TACH MOUNT
AND HANDLEBAR CLAMP
68960-98
Fits ’93-later FXDWG and ’86-later
FLSTC, FLSTF, FLSTN and ’99-later FXSTB models
with Mini-Tach P/N 67946-96A. (Does not fit with
Street Stalker Headlamp Nacelle.) (Does not work with
Windshield P/Ns 91820-85A, 57965-97A or ’00-later
FLSTC models equipped with stock detachable
windshield.) FLSTC models require Kit P/N 58155-90
in order for stock windshield to fit.
$124.95
Fits ’84-later FXST Softail models (except
68962-98
FXSTB) with Mini Tach P/N 67948-96A.
$119.95
NOTE: Softail models with Chrome Headlight Nacelle
should use P/N 68961-98 Billet Mini Tach Mount and
P/N 67943-96A Mini Tach Kit.
H. DEUCE MINI TACH MOUNT KIT
Complement the smooth flowing lines of the Softail
Deuce with this chrome Mini Tach Mount. Constructed
from forged aluminium, this kit includes the curved
handlebar risers and tach mount that functions as the
handlebar clamp. All you need to do is add the appropriate Mini Tach (sold separately).
68928-02
handlebars.
Fits ’00-later FXSTD models with 1" dia
$219.95
I. CHROME BILLET MINI TACH MOUNT
Precision-machined chrome-plated aircraft quality
aluminium Mini Tach Mount incorporates a ball-milled
design clamp to add a custom touch to your Softail.
(Mini Tach is sold separately.)
H. DEUCE MINI TACH MOUNT KIT
I. CHROME BILLET MINI TACH
MOUNT FOR SPRINGER MODELS
67848-00
Fits all FXSTS and FLSTS models,
and ’00-later FXSTD models (except FXSTDSE).
(Will not fit Springer models equipped with
detachable windshields.)
$155.95
14287
VSA Partners
Harley-Davidson
Page 326
Price Non-Price Common
326
Softail
Wide Tyre and Sprocket Kits
A. WIDE TYRE KIT – ’00-’02 MODELS
Give your 2000 to 2002 Softail models that wide, solid
look, while effectively increasing your contact patch to
the road. Separate kits for both the FX and FL Model
Softails. All kits come with a 150 Dunlop series tyre
(stock is 130), a machined and repositioned brake
caliper, new splash guard, wheel spacer, and hardware to adapt most Softail accessories. Unique to the
FX models are a redesigned tail lamp assembly plus
model specific hardware. The FL package includes
saddlebag hangers, saddlebag isolators and model
specific mounting hardware as well. Designed to
accommodate your stock or accessory Softail wheels
and swingarms. Dealer installation is recommended.
43685-00
44490-00
Fits ’00-’02 FXST, FXSTS,
and FXSTB models. (Does
not fit FXSTD models.)
Fits ’00-’02 FLSTC, FLSTF,
and FLSTS models.
$489.95
$489.95
WIDE TYRE KIT – ’97-’99 MODELS
Get a radical wide tyre look without sacrificing HarleyDavidson quality. This complete kit includes a Dunlop
150-series tyre (stock tyre is 130), a new rear belt,
chrome upper and lower belt guards and all necessary
gaskets. This kit is fully compatible with your stock
wheels and stock swingarm. No further modification
required. Dealer installation is recommended. (Sold
separately.) Choose from Black Narrow Sprocket P/N
40391-98, or ThunderStar Narrow Sprocket P/N
40336-99 to complete your installation.
43684-99
Fits ’97-’99 FXSTC, FXSTS,
FXSTB, FXSTSB, FLSTC and FLSTF
models. (Does not fit ’00-later
models or FLSTS models.)
$499.95
B. BLACK NARROW SPROCKET
Narrow Sprocket for Wide Tyre Kit P/N 43684-99.
Looks great with H-D Chrome Sprocket Cover P/N
40317-94 (sold separately).
65 Tooth
40391-98
Fits ’97-’99 FXSTC, FXSTS,
FXSTB, FXSTSB, FLSTC and
FLSTF models. (Does not fit ’00
models or FLSTS models.)
$144.00
C. THUNDERSTAR CHROMED
BILLET SPROCKET
Designed to match the awesome styling of the
ThunderStar Wheel, these sprockets are manufactured from 6061-T6 forged billet aircraft aluminium,
and precision-machined to exacting Original
Equipment standards. Our sprockets are the only
sprockets on the market that feature a proprietary
process that combines the decorative chrome with
wear-resistant surface applied to the chrome teeth.
They are also chrome-plated with the same hexavalent process that matches chrome Harley-Davidson
accessories. The sprockets come with a five-year
warranty that applies to tooth wear only.
40336-99
Narrow.
Fits ’97-’99 Softail models
equipped with Wide Tyre Kit
P/N 43684-98B or 43684-99.
A. WIDE TYRE KIT
$339.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. BLACK NARROW SPROCKET
C. THUNDERSTAR CHROMED
BILLET SPROCKET
14287
VSA Partners
Harley-Davidson
Page 327
Price Non-Price Common
327
Softail
Suspension and Tail Light Collar
D. PROFILE LOW REAR SUSPENSION*
This suspension lowers the seat height approximately
1" (P/N 54588-94) or 3/4" (P/N 54648-00 and 54665-03)
while preserving ride quality. Spring and damping rates
tailored for Softail models to ensure a controlled ride.
Shocks feature multi-staged damping to insure optimal
performance under varying conditions. Kit includes a
pair of rear shock absorbers and a Softail shock spring
preload adjustment wrench. Compatible with Profile
Low Front Suspension for FLSTC, FLSTF and FLSTN
models only (P/N 54596-94).
Chrome
54648-00A
54588-94
Black
54665-03
Fits ’00-later Softail
models (except FXSTD).
Fits all ’89-’99 Softail
models, including ’97-’99
FLSTS. (not shown)
Fits ’00-later Softail models
(except FXSTD).
$349.00
$299.95
$284.95
E. PROFILE LOW FRONT SUSPENSION*
Designed by H-D to lower the front fork approximately 1" while preserving ride quality. Springs are progressively wound to allow a compliant, yet controlled
ride. Kit includes two fork springs and a shorter jiffy
stand to ensure proper jiffy stand operation.
54596-94
Fits ’89-later FLSTC, FLSTF and
FLSTN Softail models. (Does not fit
FXST, FXSTB, FXSTC, FXSTD or
Springer models.) Must only be
installed on vehicles equipped with
Profile Low Rear Suspension
(P/Ns 54588-94 or 54648-00). $109.95
F. CHROME TAIL LIGHT COLLAR
This chrome-plated ABS tail light collar dramatically
changes the appearance of your rear fender. The collar is easy to install, and the kit includes all mounting
hardware. From the workshop of Wyatt Fuller.
68311-01
Fits ’03-later XL,
Dyna (except FXDWG),
and FLSTF models.
$28.95
D. PROFILE LOW REAR SUSPENSION
NEW
1
E. PROFILE LOW FRONT SUSPENSION
F. CHROME TAIL LIGHT COLLAR
*WARNING: Installation of any accessory suspension components may affect cornering
clearance and jiffy stand operation. This could
distract the rider, causing loss of control and
death or serious injury.
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 328
Price Non-Price Common
328
Softail
Front End Kits
A. CHROME FRONT
END KIT – FL SOFTAIL
A truly complete front end kit with the new improved
internal valving components found on ’00-later models.
Includes assembled chrome fork sliders, chrome upper
fork covers, upper chrome triple tree, lower triple tree,
bearings, installation hardware and fork oil to boot.
46918-00
46913-00
Fits ’00-later FLSTF
and FLSTC models.
Fits ’86-’99 FLST, FLSTC,
FLSTF and FLSTN models.
$979.96
$899.95
B. CHROME FRONT
END KIT – FX SOFTAIL
You may not get there faster with chrome leading the
way, but you’ll definitely get there in style. This complete kit includes chrome fork sliders, chrome billet
fork dust shields, chrome upper fork nut caps, chrome
drain screws, chrome acorn nuts and chrome triple
trees. Fork sliders are assembled and include fork oil.
Kit also includes upgraded fork damping springs and
valves and triple tree tapered roller bearings, braces
and dust shields.
46224-00
45765-00
Fits ’00-later FXST
and FXSTB models.
Fits ’91-’99 FXST, FXSTC,
and FXSTB models.
$995.95
$949.95
C. SOFTAIL FRONT FORK
SLIDER ASSEMBLY
Developed for the rider who needs to replace a front
fork assembly, this accessory comes with the chrome
lower fork slider already assembled. Kit includes the
fork assembly with fork oil installed, and also includes
chrome drain screws, chrome axle retaining cap and
chrome acorn nuts.
1. FX Softail
46227-00
Lefthand.
46228-00
46916-01
46917-01
Fits all ’00-later FX Softail
models except FXSTD.
Righthand.
Fits all ’00-later FX Softail
models except FXSTD.
Lefthand.
Fits ’91-’99 FXST, FXSTC
and FXSTB models.
Righthand.
Fits ’91-’99 FXST, FXSTC
and FXSTB models.
$294.95
$294.95
$294.95
$294.95
2. FL Softail
46211-01
Lefthand.
46212-01
46914-00
46915-00
Fits ’00-later FLSTC,
and FLSTF models.
Righthand.
Fits ’00-later FLSTC,
and FLSTF models.
Lefthand.
Fits ’86-’99 FLST, FLSTC,
FLSTF and FLSTN models.
Righthand.
Fits ’86-’99 FLST, FLSTC,
FLSTF and FLSTN models.
$294.95
A. CHROME FRONT END KIT – FL SOFTAIL
B. CHROME FRONT END KIT – FX SOFTAIL
$294.95
$294.95
$294.95
1
2
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
C. SOFTAIL FRONT FORK SLIDER ASSEMBLY
14287
VSA Partners
Harley-Davidson
Page 329
Price Non-Price Common
329
Softail
Front End Kits
D. BLACK FRONT END KIT
FOR FX SPRINGER
Feeling a little nostalgic for a Bad Boy ? Now you can
put the blacked out Springer Front End on your
Softail. It may not be coming off the assembly line
anymore, but it’s finding its way back onto the street
with this complete front end assembly.
46196-00
Fits ’96-’99 Softail models.
Results in 32 degree rake. Stock
on ’96-’97 FXSTSB models. $2,299.00
E. CHROME FRONT END KIT
FOR FX SPRINGER
This front end comes completely assembled from the
Harley-Davidson factory, including all necessary hardware. Perfect for the do-it yourselfer who wants to
rebuild their own Softail model using Harley-Davidson
Genuine Motor Parts. Does not include wheel, axle,
brakes or fender.
46195-00
Fits ’00-later Softail models.
Results in 32 degree rake angle.
Stock on FXSTS models.
$2,299.95
F. WHEEL AND BRAKE KIT
FOR FX SPRINGER
This kit completes the look of your FX Springer Front
End Kit. Kit includes the wheel, brake caliper assembly,
brake rotor, front axle and necessary mounting hardware. (Shown with painted front fender, not included.)
43849-00
Fits ’94-later FXSTS and
FXSTB models. Requires separate
purchase of Front End Kit
P/Ns 46195-00 or 46196-00.
$699.95
G. WHEEL AND BRAKE KIT
FOR FX SPRINGER MODELS
This kit completes the look of your FX Springer Front
End Kit. Kit includes the wheel, brake caliper assembly,
brake rotor, front axle and necessary mounting hardware. (Shown with painted front fender, not included.)
43849-00
D. BLACK FRONT END KIT
FOR FX SPRINGER
E. CHROME FRONT END KIT FOR FX SPRINGER
F. WHEEL AND BRAKE KIT
FOR FX SPRINGER
G. WHEEL AND BRAKE KIT
FOR FX SPRINGER MODELS
Fits ’94-later FXSTS and
FXSTB models. Requires separate
purchase of Front End Kit
P/Ns 46195-00 or 46196-00.
$699.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
Harley-Davidson
Page 330
Price Non-Price Common
Page 331
Price Non-Price Common
330
331
Softail
Softail
Front End Kits
Front End Kits
A. SOFTAIL DEUCE
CHROME FRONT END KIT
E. FRONT END KIT FOR SOFTAIL
STANDARD AND NIGHT TRAIN MODELS
Chroming your front end is easier than ever with this
complete front end assembly kit. Stock on the Softail
Deuce with chrome lowers, this front end is assembled and chromed by Harley-Davidson, so you can be
assured the best quality and fit without the hassle of
worrisome exchanges. This complete assembly
includes the chrome fork legs, triple trees with bearings, steering stem, dust shield and all necessary
hardware and reflectors.
Assembled by Harley-Davidson at the Final Assembly
Plant in York, PA. This complete assembly features
unparalleled quality and fitment at an affordable price.
Assembly includes Original Equipment fork leg assemblies, triple trees with bearings, steering stem, dust
shields and all necessary hardware and reflectors.
45343-00
45332-00
Fits ’00-later FXST, FXSTB
and FXSTD models resulting in
34 degree rake. Stock on FXSTD
models. Requires separate
purchase of FXSTD fender.
$899.00
This kit completes the look of your FX Softail or Dyna
Wide Glide Front End Kit. Kit includes the wheel, four
piston brake caliper assembly, brake rotor, front axle
and necessary mounting hardware.
Complete the sleek look of the Deuce Chrome Front
End Kit P/N 45343-00 with this package. Because it’s
stock on ’00 FXSTD models, you can be certain of
quality, style and fitment. Kit includes the wheel, brake
caliper assembly, brake rotor, front axle and necessary
mounting hardware.
44389-00
Fits ’00-later FXST, FXSTB and
FXSTD models with 34 degree frame
rake. Stock on FXSTD models.
Requires separate purchase
of Front End Kit P/N 45343-00. $749.95
The styling of the Heritage Springer has changed the
motorcycling world. Now you can easily change your
Softail to this classic look. This front end comes completely assembled from the Harley-Davidson factory,
including all necessary hardware. Perfect for the do-ityourselfer who wants to rebuild their own Softail
model using Harley-Davidson Genuine Motor Parts.
Does not include wheel, axle, brakes or fender.
Assembled by Harley-Davidson at the Final Assembly
Plant in York, PA. This complete assembly features
unparalleled quality and fitment at an affordable price.
Assembly includes Original Equipment fork leg assemblies, triple trees with bearings, steering stem, dust
shields and all necessary hardware and reflectors.
Fits ’00-later Softail models
with four piston calipers.
Results in 32 degree rake
angle. Stock on ’00-later
FLTSF and FLSTC models.
46194-00
This kit completes the look of your Heritage Springer
Front End Kit. Kit includes the wheel, brake caliper
assembly, brake rotor, front axle and all necessary
mounting hardware. (Shown with painted front fender,
not included.)
This kit completes the look of your Heritage Softail
Classic Front End Kit. Kit includes the wheel, four
piston brake caliper assembly, brake rotor, front axle
and necessary mounting hardware.
43848-00
Fits ’00-later FLSTC models.
Requires separate purchase of
Front End Kit P/N 45331-00.
$749.95
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
Fits ’00-later Softail models.
Results in 32 degree rake angle.
Stock on FLSTS models.
$2,499.95
H. WHEEL AND BRAKE KIT FOR
HERITAGE SPRINGER MODELS
$699.95
D. WHEEL AND BRAKE KIT FOR
HERITAGE SOFTAIL CLASSIC MODELS
44388-00
Fits ’00-later FXST, FXSTB and
FXDWG models. (Does not fit
FX Springer or FXSTD models.)
Requires separate purchase of
Front End Kit P/Ns 45332-00
or 45371-00.
$599.95
G. FRONT END KIT FOR
HERITAGE SPRINGER MODELS
C. FRONT END KIT FOR HERITAGE
SOFTAIL CLASSIC AND FAT BOY MODELS
45331-00
$689.95
F. WHEEL AND BRAKE KIT FOR FX
SOFTAIL OR DYNA WIDE GLIDE MODELS
B. SOFTAIL DEUCE WHEEL AND BRAKE KIT
43597-00
Fits ’00-later Softail models
with four piston calipers.
Results in 34 degree rake
angle. Stock on ’00-later
FXST and FXSTB models.
A. SOFTAIL DEUCE CHROME FRONT END KIT
C. FRONT END KIT FOR HERITAGE SOFTAIL
CLASSIC AND FAT BOY MODELS
E. FRONT END KIT FOR SOFTAIL
STANDARD AND NIGHT TRAIN MODELS
G. FRONT END KIT FOR
HERITAGE SPRINGER MODELS
B. SOFTAIL DEUCE WHEEL AND BRAKE KIT
D. WHEEL AND BRAKE KIT FOR
HERITAGE SOFTAIL CLASSIC MODELS
F. WHEEL AND BRAKE KIT FOR FX SOFTAIL
OR DYNA WIDE GLIDE MODELS
H. WHEEL AND BRAKE KIT FOR
HERITAGE SPRINGER MODELS
Fits ’96-later FLSTS models.
Requires separate purchase of
Front End Kit P/N 46194-00.
$899.00
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
14287
VSA Partners
14287
VSA Partners
Harley-Davidson
Harley-Davidson
Page 332
Price Non-Price Common
332
Softail
Street Stalker and Front Fender Kits
A. STREET STALKER HEADLAMP
NACELLE AND FRONT FENDER KIT
The unique custom styling of the Street Stalker front
end is now available separately. A contoured twopiece design creates flowing lines and smooth curves
that provide an original look. Available primed or
painted, with a colour-matched nacelle and a colourmatched fender with complementary pinstriping.
B. STREET STALKER FRONT FENDER KIT
The smooth curves of the Street Stalker front fender
easily create a clean, custom front end look. Made
from high-impact, injection-moulded composite
materials and available primed or colour-matched
with complementary pinstripes. Includes mounting
hardware.
Fits ’86-later FLSTC and FLSTF models.
C. BOBTAIL REAR FENDER
CONVERSION KIT
This Original Equipment style Bobtail Fender Kit
allows you to convert your Fat Boy to the “Bobtail”
look. The kit includes a primed fender, fender supports, and all necessary hardware.
59657-03
Fits ’03-FLSTF models.
Stock on FXST, FXSTS,
and FXSTB models.
$199.95
Refer to the Colour Shop section for
a complete listing of colour options.
A. STREET STALKER HEADLAMP NACELLE AND FRONT FENDER KIT
NEW
Notice: The prices appearing in this catalogue are the
manufacturer’s suggested retail prices. Actual retail
prices may vary.
B. FL SOFTAIL CLEAN FRONT FENDER
C. BOBTAIL REAR FENDER
CONVERSION KIT
14287
VSA Partners
Harley-Davidson
Page 333
Price Non-Price Common
333
Screamin’ Eagle II +
Mufflers with End
Caps – Race Application
Only 80220-02, page 502
Chrome Headbolt Bridge Kit
43858-00, page 562
Softail
Multi-fit parts & accessories
Just because you’ve reached the end of
the Softail section doesn’t mean you’re
out of custom options. We’ve got Screamin’
Eagle Performance Parts that can build your
bike’s horsepower and torque, plus a ton of
additional custom possibilities in the Multi-Fit
section of this catalogue. There, you’ll find
the Chrome Bolt Covers and other subtle
details that stand out as telltale signs of a true
custom. And you’ll discover stunning new
accessories
like our Wide Beach Handlebar, built to accommodate internal wiring for a clean, uncluttered
custom look—especially with the addition
of chrome controls. So before you call it a day,
check out Multi-Fit for Softail solutions.
New for 2003—Wide Beach Handlebar
56364-02, page 599
14287
VSA Partners
Harley-Davidson