Malco Tools - ECCO Supply

Revised: August 2016 • Replaces: April 2015
MALCO TOOLS
www.malcoproducts.com
INDEX
BIT EXTENSIONS...................................................................................................... 14-11
BLADES, REPLACEMENT
ANDY™ SNIPS......................................................................................................... 14-7
ANDY™ CLASSIC SNIPS..................................................................................... 14-8
NAVI-GATOR™....................................................................................................... 14-8
ORIGINAL ANDY™ SNIPS.................................................................................... 14-8
RECIPROCATING SAW — METAL CUTTING.............................................. 14-9
RECIPROCATING SAW — WOOD CUTTING.............................................. 14-9
BLIND RIVETS — 100 PACK.................................................................................. 14-12
BREAK-AWAY KNIFE................................................................................................ 14-12
CAULKING GUN........................................................................................................... 14-4
CIRCULAR “DUCKBILL” SNIPS................................................................................. 14-7
CIRCUMFERENCE RULE............................................................................................ 14-9
CONNEXT™ KIT......................................................................................................... 14-10
CONNEXT™ QUICK CHANGE HANDLES.......................................................... 14-10
CRIMPERS........................................................................................................................ 14-3
DEAD BLOW HAMMER — WEATHER-RESISTENT URETHANE................ 14-10
DIVIDERS.......................................................................................................................... 14-2
DRIVERS
CONNEXT™ HAND........................................................................................... 14-10
CONNEXT™ HEX CHUCK................................................................ 14-10 – 14-11
CONNEXT™ NUT............................................................................................... 14-11
IMPACT — MIGHTY-RIGHT™ RIGHT ANGLE.......................................... 14-14
REPLACEMENT PARTS............................................................................ 14-14
SQUARE HEAD CHUCK — ROBERTSON® STYLE.................................. 14-11
DUCT KNIFE — SERRATED................................................................................... 14-13
DUCT RIPPER.................................................................................................................. 14-2
DUCT STRETCHERS...................................................................................................... 14-2
ECONOMY HAND RIVETER................................................................................... 14-12
ELECTRICAL PLIERS................................................................................................ 14-13
FITTING BRUSHES.................................................................................................... 14-13
REDLINE
ADJUSTABLE PUNCH......................................................................................... 14-3
CEILING PUNCH..................................................................................................... 14-3
HAND CRIMPERS................................................................................................. 14-3
HAND NOTCHERS............................................................................................... 14-3
HAND SEAMERS.................................................................................................. 14-5
HOLE PUNCH........................................................................................................ 14-3
HVAC STARTER KIT........................................................................................... 14-14
PUNCH LOCK, METAL STUD CRIMPER........................................................ 14-3
SNAP LOCK HAND PUNCH.............................................................................. 14-3
REPLACEMENT SPRINGS ........................................................................................... 14-6
RULES — ALUMINUM STRAIGHT EDGE............................................................. 14-9
SCRATCH AWLS........................................................................................................... 14-2
SCRIBES............................................................................................................................. 14-2
SEAMER AND TONGS............................................................................................. 14-13
SNIPS
ALUMINUM — STRAIGHT — 12"............................................................... 14-13
ANDY™ CLASSIC.................................................................................................... 14-7
ANDY™ — LIGHTWEIGHT.................................................................................. 14-7
AVIATION................................................................................................................ 14-6
FORGED STEEL....................................................................................................... 14-7
MAX2000 AVIATION........................................................................................... 14-6
MAX2000 DOUBLE CUT AVIATION............................................................... 14-6
MAX2000 OFFSET AVIATION.......................................................................... 14-6
MAX2000 REPLACEMENT SPRING................................................................ 14-6
STEP DRILLS............................................................................................................... 14-13
TAPE MEASURE — POWER RETURN................................................................... 14-8
TAPE MEASURES — MAGNETIC TIP.................................................................... 14-9
TENSIONING TOOLS — NYLON TIES..................................................................... 14-5
“T” HANDLE HEX KEY SET........................................................................................ 14-5
TOOL BAG......................................................................................................................14-14
HEX KEY SET................................................................................................................. 14-5
TOOLS
FIN STRAIGHTENING......................................................................................... 14-4
FLARING.............................................................................................................. 14-13
FLEX DUCT............................................................................................................. 14-5
FOLDING ............................................................................................................... 14-5
HOLE CUTTERS............................................................................................................ 14-4
TRAMMEL POINTS........................................................................................................ 14-2
HOLE IN ONE VENT SAW....................................................................................... 14-12
TUBE BENDERS — SPRING-STYLE......................................................................... 14-8
HOLE SAWS — QUICK ACTION CARBIDE TIPPED........................................... 14-4
TUBE CUTTERS............................................................................................................... 14-8
LEVELS............................................................................................................................ 14-9
TUBE SLICER................................................................................................................... 14-8
MINI BRAKE™............................................................................................................. 14-11
TURBO SHEAR™........................................................................................................ 14-11
PIPE AND DUCT HOLDERS........................................................................................ 14-2
TURBO SHEAR™ AIR POWERED PNEUMATIC SHEAR................................. 14-12
PLUMBER’S ROLL..................................................................................................... 14-14
UTILITY KNIFE — TOP BUTTON......................................................................... 14-12
FOAMBOARD STAPLER.......................................................................................... 14-12
HACK SAW BLADES.................................................................................................... 14-9
HAMMERS................................................................................................................... 14-10
POWDERED CHALK.................................................................................................... 14-5
RATCHET WRENCH.................................................................................................. 14-13
Expert Service. Quality Products. Since 1960.
ECCO Supply™
www.eccosupply.ca 14-1
Revised: August 2016 • Replaces: April 2015
MALCO TOOLS
www.malcoproducts.com
SCRATCH AWLS
ITEM #
MODEL
DESCRIPTION
707050
707051
707052
707044
707046
707043
A1
A2
A3
A20
A10
A0
7/32" × 3-1/2" Blade
1/4" × 4" Blade
3/8" × 5" Blade
1/4" × 4" Blade
3/16" × 3-3/4" Blade
1/8" × 3" Blade
A1
O/A LENGTH (")
A2
5-3/4
6-1/4
7-1/2
7-3/4
7
6-1/4
A3
A20
A10
A0
SCRIBES
ITEM #
MODEL
DESCRIPTION
707039
707053
707049
707045
707150
A40
A50
A60
A50R
SCS16
Sheet Metal Scriber
Carbide Tipped Scriber
Adjustable Sheet Metal Scriber
Replacement Carbide Tip for A50 Scriber
Combination Square – 16" with Scriber and Pencil Guide
A50
A40
A60
SCS16
DIVIDERS
ITEM #
MODEL
DESCRIPTION
707066
707067
18
24
For 32" maximum diameter circle
For 42" maximum diameter circle
O/A LENGTH (")
11
13-1/2
24
18
TRAMMEL POINTS
ITEM #
MODEL
RADIUS
707250
707252
707253
TR18
TR42
TRP
7" to 18"
12" to 42"
One pair Replacement Points
O/A STORAGE
LENGTH (")
12
24
—
TR42
TR18
DUCT STRETCHERS
ITEM #
MODEL
DESCRIPTION
707071
707070
707069
707090
DS3
DS2
DS1
DS1C
Locking Stretcher
Offset Stretcher
Duct Stretcher
Replacement wheels, nuts, and screws
(2 of each)
DS3
DS-3
O/A LENGTH (")
12
16
16
—
DS1
DS2
DUCT RIPPER
ITEM #
MODEL
DESCRIPTION
707054
CDR
9-1/2" Long Duct Ripper
PIPE AND DUCT HOLDERS
ITEM #
MODEL
DESCRIPTION
707058
2DH
2 – 8" Clamps and 4' of Chain
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
14-2 www.eccosupply.ca
ECCO Supply™
Revised: August 2016 • Replaces: April 2015
MALCO TOOLS
www.malcoproducts.com
REDLINE HAND NOTCHERS
ITEM #
MODEL
DESCRIPTION
706974
706976
N1R
N2R
13/16" Throat Depth
1" Throat Depth
N1R
N2R
REDLINE SNAP LOCK HAND PUNCH
ITEM #
MODEL
DESCRIPTION
706982
SL1R
3/8" Throat Depth
REDLINE ADJUSTABLE PUNCH
ITEM #
MODEL
DESCRIPTION
706983
SL2R
Redline Adjustable Punch
REDLINE HOLE PUNCH
ITEM #
MODEL
DESCRIPTION
707274
HP18KR
Redline Hole Punch, 1/2 to 1-1/8" Throat Dept (Adj.),
Capacity: 24 GA
REDLINE PUNCH LOCK, METAL STUD CRIMPER
ITEM #
MODEL
DESCRIPTION
707275
PL1R
Punch Lock Stud Crimper, 1-1/2" Throat Depth,
Capacity: 22GA
REDLINE CEILING PUNCH
ITEM #
MODEL
DESCRIPTION
706975
CGPR
Ceiling Grid Punch, 1-1/2" Throat Depth
CRIMPERS
ITEM #
MODEL
DESCRIPTION
707042
C5A
Crimper, Drill Attachment, for 24-30 gauge round metal and
duct pipe
REDLINE HAND CRIMPERS
ITEM #
MODEL
DESCRIPTION
706971
706972
706977
C4R
C5R
C6R
706981
SC3R
5-Blade Downspout Crimper
5-Blade Crimper – Stove Pipe and Round Metal Duct
5-Blade Crimper – Suits Overhead or Tight Working
Space Applications
3-Blade Crimper – Downsize Heavier Pipe & Duct,
24 to 22 gauge
C4R
C6R
C5R
SC3R
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
ECCO Supply™
www.eccosupply.ca 14-3
Revised: August 2016 • Replaces: April 2015
MALCO TOOLS
www.malcoproducts.com
HOLE CUTTERS
ITEM #
MODEL
DESCRIPTION
706928
706930
706929
706932
706926
706935
HC1B
HC1
HC2
CB
HCAD
CBB
Pivot Pin Set (HC1)
Cuts 2" – 12" diameter hole to 20 gauge
Cuts 2" – 20" diameter hole to 20 gauge
Replacement Bit for HC1
Right angle drive accessory for HC1
Replacement bit for HC1, HC2 (6-pk)
HC1
HOLE SAWS — QUICK ACTION CARBIDE TIPPED
CUTTING
DEPTH (")
ITEM #
MODEL
HOLE DIA. (")
707203
707205
707210
707213
707216
707217
707219
707220
707221
707223
707265
HF3
HF5
HF8
HF11
HF14
HF15
HF16
HF17
HF18
HF19
HA3
707266
707267
HH4
HH5
2
2-1/4"
5/8 – 18
2-1/2
2-1/4"
5/8 – 18
3-1/2
2-1/4"
5/8 – 18
4-1/2
2-1/4"
5/8 – 18
5-1/2
2-1/4"
5/8 – 18
6
2-1/4"
5/8 – 18
6-5/16
2-1/4"
5/8 – 18
2-9/16
2-1/4"
5/8 – 18
3-5/8
2-1/4"
5/8 – 18
4-5/8
2-1/4"
5/8 – 18
Quick Connect Arbor
Use with Pilot Drills: HH4, HH5
Quick Change Pilot Drill – High Speed Steel
Quick Change Pilot Drill – Carbide Tipped
THREAD SIZE
Use with Arbor HA3
Use with Arbor HA3
CAULKING GUN
ITEM #
MODEL
DESCRIPTION
707149
CG10
Spouted Cartridge – 1/10 gallon
FIN STRAIGHTENING TOOL
ITEM #
MODEL
DESCRIPTION
707256
FST
707257
FST2
For 8, 10, 12 or 14 fins per inch, with Adjustable Nylon
Comb
For 16, 18, 20 or 22 fins per inch, with Adjustable
Nylon Comb
FST
FST2
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
14-4 www.eccosupply.ca
ECCO Supply™
Revised: August 2016 • Replaces: April 2015
MALCO TOOLS
www.malcoproducts.com
REDLINE HAND SEAMERS
ITEM #
MODEL
DESCRIPTION
706978
706980
706979
S2R
S6R
S3R
Hand Seamer – 3-1/4" Jaw width
Hand Seamer – 6" Jaw width
Offset Hand Seamer – 3-1/4" Jaw Width
S2R
S6R
S3R
FOLDING TOOLS
24F
ITEM #
MODEL
DESCRIPTION
707102
707104
707106
707100
12F
18F
24F
9A
3/8", 1" Folding Depth
3/8", 1" Folding Depth
3/8", 1" Folding Depth
Adjustable 1/4" to 1-1/2"
18F
WIDTH (")
12
18
24
9
12F
9A
HEX KEY SET
ITEM #
MODEL
DESCRIPTION
707065
W29
Deluxe Hex Pocket Set – 9 keys
“T” HANDLE HEX KEY SET
ITEM #
MODEL
DESCRIPTION
707088
WT9SG
9" Gripped Hex “T” Key Set (3/32" – 1/4")
FLEX DUCT TOOLS
ITEM #
MODEL
DESCRIPTION
LENGTH (")
706830
FDC1
Flex Duct Cutter
11-7/8
TENSIONING TOOLS — NYLON TIES
ITEM #
MODEL
DESCRIPTION
707284
707285
TY4G
TY6
Manual Cutoff Tie Tool, Gripped
Adjustable high leverage, auto cutoff
LENGTH (")
6
8-1/2
TY4G
TY6
POWDERED CHALK
ITEM #
MODEL
DESCRIPTION
707291
C8R
Powdered Chalk – Red
LENGTH (")
11-7/8
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
ECCO Supply™
www.eccosupply.ca 14-5
Revised: August 2016 • Replaces: April 2015
MALCO TOOLS
www.malcoproducts.com
AVIATION SNIPS
ITEM #
MODEL
DESCRIPTION
GRIPS
706822
706823
706824
706825
706821
707187
707188
AV1
AV2
AV3
AV8
AV9
AVM6 EV
AVM7 EV
Cuts left
Cuts right
Cuts straight, left and right
Vertical Aviation Snip, cuts left
Vertical Aviation Snip, cuts right
Aviation Snips, Mini, Left, Offset
Aviation Snips, Mini, Right, Offset
Red
Green
Yellow
Red
Green
–
–
AV1
AV3
AV2
AV8
AV9
MAX2000 AVIATION SNIPS
ITEM #
MODEL
DESCRIPTION
706808
706809
706811
706813
M2001
M2002
M2003
M2005
Cuts left and straight
Cuts right and straight
Cuts straight, left, and right
Bulldog notching and trimming
GRIPS
Black/Red
Black/Green
Black/Yellow
Black/Red
M2005
MAX2000 REPLACEMENT SPRING
ITEM #
MODEL
DESCRIPTION
707025
M2000S
Replacement Spring for MAX2000 Snips
MAX2000 OFFSET AVIATION SNIPS
ITEM #
MODEL
DESCRIPTION
GRIPS
706814
706815
M2006
M2007
Cuts left angles and right circles
Cuts right angles and left circles
Red
Green
M2006
MAX2000 DOUBLE CUT AVIATION SNIPS
ITEM #
MODEL
DESCRIPTION
GRIPS
706812
M2004
Straight double cuts
Yellow
REPLACEMENT SPRINGS
ITEM #
C706801
707029
MODEL
DESCRIPTION
2RFG
5018
Spring for 2R Snips
Spring for C5 (Pipe Crimper), N1 (Notcher),
SL1, SL2 (Punches)
5018
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
14-6 www.eccosupply.ca
ECCO Supply™
Revised: August 2016 • Replaces: April 2015
MALCO TOOLS
www.malcoproducts.com
CIRCULAR “DUCKBILL” SNIPS
ITEM #
MODEL
DESCRIPTION
706816
706818
MD12
MD10
12" Circular Duckbill Snip – 3" Cut
10" Circular Duckbill Snip – 2-1/2" Cut
FORGED STEEL SNIPS
ITEM #
MODEL
DESCRIPTION
706817
706805
M9
M15
Regular Pattern Snip – 3" Cut
Bulldog Pattern Snip – 2-1/2" Cut
M15
ANDY™ SNIPS — LIGHTWEIGHT
ITEM #
C706801
707010
C706801
707011
707023
707034
MODEL
DESCRIPTION
M12N
M12NG*
MC12N
MC12NG*
M14NEV
MC14NEV
12" Long – 3" Cut pattern snips
12" Long – 3" Cut pattern snips
12" Long – 3" Cut combination snips
12" Long – 3" Cut combination snips
14" Long – 3-1/2" Cut pattern snips
14" Long – 3-1/2" Cut combination snips
M12N
MC12N
M12NG
MC12NG
M14NEV
MC14NEV
*Indicates “gripped”
ANDY™ SNIPS — REPLACEMENT BLADES
ITEM #
MODEL
DESCRIPTION
707012
707032
707035
M12NRB
M14NRB
MC14NRB
For all M12N and NG
For all M14N
For all MC14N
M12NRB
ANDY™ CLASSIC SNIPS
ITEM #
MODEL
DESCRIPTION
707022
707009
707024
C706801
M12A
MC12A
M14A
MC14A
12" long – 3" Cut pattern snips
12" long – 3" Cut combination snips
14" long – 3-1/4" Cut pattern snips
14" long – 3-1/4" Cut combination snips
M12A
MC12A
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
ECCO Supply™
www.eccosupply.ca 14-7
Revised: August 2016 • Replaces: April 2015
MALCO TOOLS
www.malcoproducts.com
ANDY™ CLASSIC SNIPS — REPLACEMENT BLADES
ITEM #
C706801
C706801
C706801
C706801
MODEL
DESCRIPTION
M12ARB
MC12ARB
M14ARB
MC14ARB
For M12A
For MC12A
For M14A
For MC14A
MC12ARB
ORIGINAL ANDY™ SNIPS — REPLACEMENT BLADES
ITEM #
707020
C706801
707030
C706801
MODEL
DESCRIPTION
M12RB
MC12RB
M14RB
MC14RB
For M12
For MC12
For M14
For MC14
MC12RB
NAVI-GATOR™ — REPLACEMENT BLADE
ITEM #
MODEL
DESCRIPTION
707017
M2012RB
Replacement Blade
TUBE CUTTERS
ITEM #
MODEL
DESCRIPTION
707197
707196
707146
707139
707141
RTC623
RTC829
STC650
TC274
TC127
Ratchet Tube Cutter, Cuts Tubing 1/4" to 7/8"
Ratchet Tube Cutter, Cuts Tubing 5/16" to 1-1/8"
Spring Loaded Tube Cutter – 1/4" – 2" OD
Cuts Tubing 1/8" – 1-1/8" OD
“IMP” Cutter – Cuts Tubing 1/8" to 5/8"
RTC623
RTC829
STC650
TC274
TC127
TUBE SLICER
ITEM #
MODEL
DESCRIPTION
707195
TC400
Sure Grip Tube Slicer
TUBE BENDERS — SPRING-STYLE
ITEM #
MODEL
DESCRIPTION
707137
707145
707138
TB1022
TB1028
TB1026
3/4" OD Tube Bender
1/2" OD Tube Bender
3/8" OD Tube Bender
TAPE MEASURE — POWER RETURN
ITEM #
MODEL
DESCRIPTION
707190
CT425
1" × 25 ft. with Reinforced End Hook
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
14-8 www.eccosupply.ca
ECCO Supply™
Revised: August 2016 • Replaces: April 2015
MALCO TOOLS
www.malcoproducts.com
TAPE MEASURES — MAGNETIC TIP
ITEM #
MODEL
DESCRIPTION
707193
707192
707194
T416M
T425M
T430M
1" × 16 ft.
1" × 25 ft.
1" × 30 ft.
T430M
T425M
T416M
RULES — ALUMINUM STRAIGHT EDGE
ITEM #
MODEL
DESCRIPTION
706940
48AR
48" × 2" wide, 1/8" and 1/16" graduations
CIRCUMFERENCE RULE
ITEM #
MODEL
DESCRIPTION
706942
48BS
48" × 1-1/4" Stainless Steel, 1/8" increments
ITEM #
MODEL
DESCRIPTION
707200
L9M
9" long Torpedo Level w/magnetic base
LEVELS
RECIPROCATING SAW BLADES — WOOD CUTTING
ITEM #
MODEL
DESCRIPTION
706958
706959
706960
706962
706957
706966
706967
4KH6
4KH6
4KH7
4KH8
8KH7
12KH8
12KH8
6" BiMetal 5/7 TPI
6" BiMetal 5/7 TPI (5-pk)
6" High carbon steel 6 TPI
6" BiMetal blade 8 TPI
9" BiMetal blade 5/7 TPI (5-pk)
12" BiMetal blade 5/7 TPI
12" BiMetal blade 5/7 TPI (5-pk)
4KH6
4KH8
12KH8
RECIPROCATING SAW BLADES — METAL CUTTING
ITEM #
MODEL
DESCRIPTION
706952
706954
707027
706970
706973
706963
706956
707028
3MC24
4MC24
4MC24
4TF14
4TF14
4TF18
9MC10
9MC10
4" BiMetal blade 24 TPI
6" BiMetal blade 24 TPI
6" BiMetal blade 24 TPI (5-pk)
6" BiMetal hi-speed blade 14 TPI
6" BiMetal hi-speed blade 14 TPI (5-pk)
6" BiMetal cutting blade 18 TPI (5-pk)
9" BiMetal variable speed 10/14 TPI
9" BiMetal variable speed 10/14 TPI (5-pk)
3MC24
4MC24
4TF14
9MC10
HACK SAW BLADES
ITEM #
MODEL
DESCRIPTION
707287
1218B
12" BiMetal Hack Saw Blade, 18 TPI, (10-pk)
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
ECCO Supply™
www.eccosupply.ca 14-9
Revised: August 2016 • Replaces: April 2015
MALCO TOOLS
www.malcoproducts.com
HAMMERS
ITEM #
MODEL
DESCRIPTION
707064
707063
707081
707085
707086
RH4
SH3
WH23
RH4V
SH3V
Riveting – leather handle, 12 oz. polished
Setting – leather handle, 18 oz. polished
Hammer handle – wood
Riveting – vinyl handle, 12 oz. polished
Setting – vinyl handle, 18 oz. polished
RH4
SH3
RH4V
SH3V
DEAD BLOW HAMMER — WEATHER-RESISTENT URETHANE
ITEM #
MODEL
DESCRIPTION
707084
DB1
17 oz., 11" long
CONNEXT™ QUICK CHANGE HANDLES
ITEM #
MODEL
DESCRIPTION
707130
707282
CONNEXT2
CONNEXT3
Stubby Handle
Ratcheting Style Handle, Long
CONNEXT2
CONNEXT3
CONNEXT™ KIT
ITEM #
MODEL
DESCRIPTION
707283
CONNEXT5
12 piece kit. Includes: 1/4", 5/16" and 3/8" driver shafts in short,
medium and long varieties (3 each) and 3 handles (including stubby,
full grip and full grip ratcheting style)
CONNEXT™ HAND DRIVERS
ITEM #
MODEL
DESCRIPTION
707131
HHD1T
707135
HHD2T
707132
HHD1
707133
HHD2
Stubby Hand Driver, Magnetic,
1/4" Hex Opening
Stubby Hand Driver, Magnetic,
5/16" Hex Opening
Long Hand Driver, Magnetic,
1/4" Hex Opening
Long Hand Driver, Magnetic,
5/16" Hex Opening
O/A LENGTH (")
4-1/8
4-1/8
HHD1T/HHD2T
10-1/8
10-1/8
HHD1/HHD2
CONNEXT™ HEX CHUCK DRIVERS
ITEM #
MODEL
DESCRIPTION
707116
707118
HD1
HD3
707122
HD4
707134
MSH14
Hollow Hex Chuck Driver, 1/4" Hex Opening
Hollow Hex Chuck Driver,
5/16" Hex Opening
Hollow Hex Chuck Driver,
5/16" Hex Opening
Short Hex Chuck Driver, Magnetic,
1/4" Hex Opening, 10-pk
O/A LENGTH (")
3
3
HD1
6
1-3/4
(cont’d on next page)
MSH
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
14-10 www.eccosupply.ca
ECCO Supply™
Revised: August 2016 • Replaces: April 2015
MALCO TOOLS
www.malcoproducts.com
CONNEXT™ HEX CHUCK DRIVERS (cont’d)
ITEM #
MODEL
707124
MSH516
707111
707113
707123
707126
707119
DESCRIPTION
O/A LENGTH (")
Short Hex Chuck Driver, Magnetic,
5/16" Hex Opening, 10-pk
MSHML14 Extra Long, Red, Magnetic, 1/4" Hex Opening
MSHML516 Extra Long, Yellow, 5/16" Hex Opening
MSHXL14
Extra Long, Red, Magnetic, 1/4" Hex Opening
MSHXL516 Extra Long, Yellow, Magnetic, 5/16" Hex Opening
MSHXL38
Extra Long, Blue, Magnetic, 3/8" Hex Opening
1-3/4
4
4
6
6
6
MSH
MSHXK516
CONNEXT™ NUT DRIVERS
ITEM #
MODEL
DESCRIPTION
707112
707114
CHD1
CHD3
Hollow Nut Driver 1/4" Hex Opening
Hollow Nut Driver 5/16" Hex Opening
O/A LENGTH (")
7-1/2
7-1/2
CHD3
CHD1
SQUARE HEAD CHUCK DRIVERS — ROBERTSON® STYLE
ITEM #
MODEL
DESCRIPTION
707128
707144
SD2
SDX2
#2 Square Head Driver
#2 Square Head Driver – 2-1/2 Chuck
SD2
BIT EXTENSIONS
ITEM #
MODEL
DESCRIPTION
707147
707148
BHE6
BHE10
Power Bit Extension, 1/4" Hex Opening
Power Bit Extension, 1/4" Hex Opening
O/A LENGTH (")
SDX2
BHE6
6
10
MINI BRAKE™
ITEM #
MODEL
DESCRIPTION
707120
MB48A
706802
706803
MB48B
MBL
Makes bends to 135° in galvanized sheet metal up to
22 gauge, accommodates sheet metal up to 4 ft. wide in
any length, weighs only 58 lbs
Mini Pan Brake
Mini Brake Legs Kit for MB48A and MB48B
BHE10
MB48A
MBL
TURBO SHEAR™
ITEM #
707162
707155
707157
707158
707159
707163
C706801
MODEL
RADIUS
TSHD
TSMD
TS1
TS1RB
TSDC
TSHDRB
TSMDRB
Heavy Duty TurboShear
Double-Cutting TurboShear
Makes fast cuts in all types of sheet metal
Replacement Blade for TS1
Drill Clamp for TS1 (optional)
Double-Cutting Replacement Blades for TSHD
Double-Cutting Replacement Blade for TSMD
TSHD
TS1
TSMD
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
ECCO Supply™
www.eccosupply.ca 14-11
Revised: August 2016 • Replaces: April 2015
MALCO TOOLS
www.malcoproducts.com
TURBO SHEAR™ AIR POWERED PNEUMATIC SHEAR
ITEM #
MODEL
DESCRIPTION
707160
TSHD1A
Heavy Duty Pneumatic Shear
ECONOMY HAND RIVETER
ITEM #
MODEL
DESCRIPTION
707096
2-in-1*
Hand Riveter – 3/32" – 3/16"
*For steel and stainless steel rivets
HOLE IN ONE VENT SAW
ITEM #
MODEL
DESCRIPTION
707107
707108
707109
707110
706936
HSW68
HSW97
RBW68
RBW97
HSRD
4-1/4" Vent Saw, 7/16" Pilot Drill
6-1/4" Vent Saw, 7/16" Pilot Drill
Replacement Blade for HSW68
Replacement Blade for HSW97
Replacement Drill for HSW68/HSW97
HSW68
BREAK-AWAY KNIFE
ITEM #
MODEL
DESCRIPTION
706944
706946
BAK
BAKRB
Break-away Knife
Replacement Blades (10-pk)
BAK
BAKRB
UTILITY KNIFE — TOP BUTTON
ITEM #
MODEL
DESCRIPTION
706964
706965
4PK
UBS5
3-Position Utility Knife
Replacement Blades (5-pk)
4PK
UBS5
FOAMBOARD STAPLER
For In-Floor Radiant Heating Installation
ITEM #
MODEL
DESCRIPTION
706968
706969
FBSN
FBS2BX
Foamboard Stapler
2-1/2" Dual Barbed Staples
BLIND RIVETS — 100 PACK
ITEM #
MODEL
DESCRIPTION
707156
707152
SS44DX
AA44DX
1/8" × 3/8" Steel Rivets, Plated Steel Mandrel
1/8" × 3/8" Aluminum Rivets, Aluminum Mandrel
SS44DX
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
14-12 www.eccosupply.ca
ECCO Supply™
Revised: August 2016 • Replaces: April 2015
MALCO TOOLS
www.malcoproducts.com
ALUMINUM SNIP — STRAIGHT — 12"
ITEM #
MODEL
DESCRIPTION
707021
M12A EV
Aluminum Snip – Straight – 12"
DUCT KNIFE — SERRATED
ITEM #
MODEL
DESCRIPTION
707072
DK6S
Serrated Duct Knife
SEAMER AND TONGS
ITEM #
MODEL
DESCRIPTION
707074
707075
707076
707077
S10
SG10
S11
SG11
Seamer and Tongs – Straight
Seamer and Tongs – Straight Grip
Seamer and Tongs – Offset
Seamer and Tongs – Offset Grip
S10
S11
ELECTRICAL PLIERS
ITEM #
MODEL
DESCRIPTION
707087
707198
WSC8
WSC1S
Electrical Pliers – Cutter, Stripper, Crimper
Electrical Pliers Combination AWG-Metric
WSC8
WSC1S
FITTING BRUSHES
ITEM #
MODEL
DESCRIPTION
707292
707293
FB1/2
FB3/4
Copper Tube Fitting Brush, 1/2" dia.
Copper Tube Fitting Brush, 3/4" dia.
FLARING TOOL
ITEM #
MODEL
DESCRIPTION
707258
FT195
Bar Clamp Type Flaring Tool
STEP DRILLS
ITEM #
MODEL
DESCRIPTION
707288
UB3
707290
UB11
Drills 9 hole sizes from 1/4" to 3/4" dia. in 1/16"
increments
Drills 11 hole sizes from 1/4" to 7/8" dia. for creating
1/2" knock outs
UB3
UB11
RATCHET WRENCH
ITEM #
MODEL
DESCRIPTION
707089
RRW5
Offset Ratchet Wrench
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
ECCO Supply™
www.eccosupply.ca 14-13
Revised: August 2016 • Replaces: April 2015
MALCO TOOLS
www.malcoproducts.com
PLUMBER’S ROLL
ITEM #
MODEL
DESCRIPTION
707048
AC310
Plumber’s Roll, 1-1/2" × 10 yds., Brown
TOOL BAG
ITEM #
MODEL
DESCRIPTION
707151
TB1
Tool Bag
REDLINE HVAC STARTER KIT
ITEM #
MODEL
DESCRIPTION
707026
STKMR
Redline HVAC Starter Kit
IMPACT DRIVER — MIGHTY-RIGHT™ RIGHT ANGLE
REPLACEMENT PARTS
ITEM #
MODEL
DESCRIPTION
706943
706945
706951
706953
706955
MR11 EV
MR12 EV
MR13 EV
MR14 EV
MR15 EV
Battery Cable – 5 ft
One-Hour – Li-ion Charger
Li-Ion Battery Pack – 7.2V, 1.5Ah
Hex Bits – Low Profile – 1/4" and 5/16"
Robertson Square Bits – #1 and #2
– E.&O.E. – All Prices F.O.B. Our Warehouse – Subject to Change Without Notice –­ All Taxes Extra – May not be Available at All Branches –
14-14 www.eccosupply.ca
ECCO Supply™