PDF version

Transcription

PDF version

mechanics
American Academy of Mechanics
Academia Americana de Mecanica
Volume 33, Number 1-2
January-February 2004
(references in the form \M28(3-4)" indicate the last time the
Journal was cited in mechanics: v. 28, n. 3-4, in this case.)
Selections of the Editor
Job Positions
Announcements
Application for Membership
mechanics Contents
Acta Materialia
Acta Mechanica
AIAA Journal
Applied Mathematical Modelling
Applied Mathematics and Mechanics
Applied Mechanics Reviews
Archive for Rational Mechanics and Analysis
Archive of Applied Mechanics
Archives of Mechanics
Communications on Pure and Applied Mathematics
Composites Part A: Applied Science and
Manufacturing
Computational Mechanics
Computer Methods in Applied Mechanics
and Engineering
Computer Modeling in Engineering & Sciences
Computers & Fluids
Computers & Structures
Earthquake Engineering & Structural Dynamics
Engineering Fracture Mechanics
Engineering Mechanics
Engineering Structures
European Journal of Mechanics A-Solids
European Journal of Mechanics B-Fluids
Experimental Mechanics
Experiments in Fluids
Fatigue & Fracture of Engineering
Materials & Structures
Finite Elements in Analysis and Design
Flow, Turbulence and Combustion
IMA Journal of Applied Mathematics
Industrial Mathematics
International Journal for Numerical and
Analytical Methods in Geomechanics
International Journal for Numerical Methods
in Engineering
International Journal for Numerical Methods in Fluids
International Journal of Damage Mechanics
International Journal of Engineering Science
International Journal of Fatigue
International Journal of Fracture
International Journal of Heat and Fluid Flow
International Journal of Heat and Mass Transfer
International Journal of Impact Engineering
International Journal of Mechanical Sciences
International Journal of Non-Linear Mechanics
International Journal of Plasticity
I
XI
XII
BC
1
1
3
4
5
5
M28(3-4)
6
7
M26(1)
8
8
9
10
11
11
12
13
14
M30(1-2)
14
15
15
M32(11-12)
15
16
18
18
19
M31(7-8)
19
20
21
M32(1-2)
23
M32(9-10)
23
M32(11-12)
24
M32(11-12)
26
26
28
International Journal of Pressure Vessels and Piping
International Journal of Solids and Structures
Inverse Problems in Engineering
Journal of Applied Mathematics and Mechanics
Journal of Applied Mechanics
Journal of Biomechanical Engineering
Journal of Biomechanics
Journal of Composite Materials
Journal of Computational and Applied Mathematics
Journal of Computational Physics
Journal of Elasticity
Journal of Engineering Materials and Technology
Journal of Engineering Mathematics
Journal of Engineering Mechanics
Journal of Fluid Mechanics
Journal of Fluids and Structures
Journal of Fluids Engineering
Journal of Intelligent Material Systems and Structures
Journal of Microelectromechanical Systems
Journal of Non-Newtonian Fluid Mechanics
Journal of Reinforced Plastics and Composites
Journal of Sound and Vibration
Journal of Strain Analysis for Engineering Design
Journal of the Mechanics and Physics of Solids
Journal of Thermal Stresses
Journal of Vibration and Acoustics
Journal of Vibration and Control
JSME International Journal Series A
JSME International Journal Series B
JSME International Journal Series C
Mathematics & Mechanics of Solids
Meccanica
Mechanics of Advanced Materials and Structures
Mechanics of Materials
Mechanics of Structures and Machines
Mechanics of Time-Dependent Materials
Mechanics Research Communications
Medical Engineering & Physics
Nonlinear Dynamics
Probabilistic Engineering Mechanics
Proceedings of the Royal Society of London, Series A,
Mathematical, Physical and Engineering Sciences
Quarterly Journal of Mechanics &
Applied Mathematics
Quarterly of Applied Mathematics
Rheologica Acta
Shock and Vibration
SIAM Journal on Applied Mathematics
Structural and Multidisciplinary Optimization
Studies in Applied Mathematics
Theoretical and Applied Fracture Mechanics
Thin-Walled Structures
Wave Motion
Zeitschrift f
ur Angewandte Mathematik und Mechanik
Zeitschrift f
ur Angewandte Mathematik und Physik
29
29
31
M31(1-2)
31
32
33
35
35
38
40
40
41
41
42
44
45
45
46
47
48
48
52
M32(11-12)
M32(11-12)
53
54
M32(11-12)
54
55
M32(11-12)
56
57
57
57
M32(11-12)
58
58
58
M32(11-12)
59
M32(11-12)
M32(11-12)
59
60
60
61
61
M32(11-12)
61
M32(11-12)
62
62
mechanics
provides its readers with news in the eld of theoretical and applied mechanics, and
serves as a forum for the presentation and discussion of issues related to the development of the
science and profession of mechanics. Opinions expressed are those of the authors and do not
necessarily reect oÆcial points of views of AAM or the institutions with which the authors are
aÆliated.
mechanics
Editor:
Horacio D. Espinosa (Northwestern University, U.S.A.)
Gustavo Buscaglia (Balseiro Institute, Argentina), Gerardo Diaz (Universidad
de Chile), Alex Elias-Zuniga (Instituto Technologica y de Estudios Superiores de Monterrey),
Djenane Pamplona (PUC-Rio, Brazil), Luis Suarez (Universidad de Puerto Rico), Reza Vaziri
(The University of British Columbia).
Associate Editors:
The American Academy of Mechanics is a non-prot corporation incorporated in 1969 under the
laws of the Commonwealth of Pennsylvania. Its objective is to advance the science and profession
of mechanics, with particular reference to the countries of North, South, and Central America. It
aims to facilitate cooperation among mechanicists, to encourage recognition of achievements in
mechanics, and to promote public understanding of the work of the mechanicist.
(2001): President and Chairman of the Board: L.T. Wheeler (University of
Houston); Immediate past President: C.W. Bert (Univeristy of Oklahoma); Secretary: R. Batra
(Virginia Polytechnic Institute and State University); Treasurer: R.A. Heller (Virginia Polytechnic
Institute and State University); Director, Region IA (Eastern USA): L. Virgin; Director, Region
IB (Central and Western USA): position open; Director, Region II (Canada): M. Paidoussis;
Director, Region III (Central and South America): P. Kittl (Universidad de Chile); Publisher:
R.M. Haythornthwaite (Temple University); Secretary to the Fellows: S. Datta (University of
Colorado at Boulder).
Board of Directors
(ISSN 0076-5783) POSTMASTER: Send address changes to mechanics, Subscription
and Membership, ESM, MC 0219, Virginia Tech, Blacksburg, VA 24061 (Tel. 540-231-6871: Fax
540-231-2290). Editorial and Advertising: Horacio D. Espinosa, Northwestern University, 2145
Sheridan Rd., Evanston, IL 60208-3111 (Tel. 847-467-5989, Fax 847-491-3915). Membership in
the American Academy of Mechanics includes the subscription to mechanics.
mechanics
Academia Americana de Mecanica
I
SELECTIONS OF THE EDITOR
SCALING LAWS FOR FRAGMENTATION ENERGY
DISSIPATION IN IMPACTS AND EXPLOSIONS
By Alberto Carpinteri* and Nicola Pugno**
Department of Structural Engineering and Geotechnica, Politecnico di Torino
Corso Duca degli Abruzzi 24, 10129 Torino, Italy
*Tel: +39.115644850, Fax: +39.115644899, E- mail: [email protected]
**Tel: +39.115644902, Fax: +39.115644899, E- mail: [email protected]
Abstract: The result of this work aims at demonstrating and unifying the three fundamental laws
regarding energy dissipation during comminution by showing their validity also as far as impact and
explosive natural and artificial phenomena are concerned and extending their import to similar events
occurring in one and two-dimensional objects. In the three-dimensional case, it emerges that energy
dissipation takes place not according to an Euclidean domain but according to a fractal one, which,
surprisingly enough, is always included within Euclidean surfaces and volumes. It is interesting to point
out how borderline cases correspond to the predictions of classical theories, namely traditional Fracture
Mechanics on the one hand and Plasticity on the other.
Euclidean Geometry greatly contributed to the development of Natural Sciences,
Mathematics and Phys ics. However, the 20th century clearly showed its limits, leading scientists
to lay aside the old notion according to which Euclidean Geometry was suitable to represent the
real Geometry of Nature. Pseudo Euclidean Geometry and Minkowski's spaces provided a basis
for Restricted Relativity and likewise Gauss-Riemann's geometry provided a similar scientific
fundation for the space-time description in General Relativity.
Gravity does not depend on scale. Therefore this has brought about the formation of
cosmic structures, which often do not seem to have a random nature, but - on the contrary possess a sponge-like topology, so as to influence consequently the selfsame space-time
geometry. Such topology has been well described by the recent Fractal Geometry1,2 which
studies structures such as e.g. sponge pores, that appear self-similar at all scales. Therefore
Fractality is linked to Scale Relativity, making it impossible to establish an absolute scale.
II
Self-similar objects at all scales are actually well known in Nature3-7 ; hence the use - and
sometimes the misuse - of fractals can be found in the most diversified fields (e.g., energies,
sizes and durations of solar flares, magnitudes of earthquakes, sizes of lakes, sizes of impact
craters on moons, frequencies of usage of words, lifetime of biological taxa, fragments of coal,
size of asteroids, particles in rings of Saturn, energy dissipation of warm-blooded animals,
distribution of scales of coastlines etc.). For instance, the problem concerning the measurement
of the length of Great Britain's3 coastline showed the fractal nature of the coastline indentation.
As a matter of fact the Euclidean method for the measurement adopted at the beginning led to
conflicting results since the more accurate the measurement was the more the coastline diverged.
Likewise, objects with different dimensions, even belonging to various magnitude sizes (e.g. a
micro fracture caused by fatigue in a metal and a macro fracture on the earth's crust originating
from an earthquake) seem to be topologically similar. In other words, the morphology of a
fracture appears self-similar at all scales: paradoxically this does not allow researchers to
understand whether the photograph of a fracture was taken using a microscope or from a
satellite.
With a view to pursue such analysis in the field of fractures, a further consideration of
fundamental purport is that at small scales the self-similarity phenomenon must fade away owing
to quantization (a phenomenon which Quantum Mechanics has made researchers familiar with).
Namely it is to be expected that at nano-scale the Continuum should die down and be replaced
by Fracture Quanta8 . Nowadays this issue is becoming more and more relevant due to the steady
growth of the development of nanotechnologies, which has considerably increased the interest in
the investigation into damages at small scale levels 9,10. As far as a fracture is concerned, even if
such fracture is extreme (e.g. in crushing processes), it is therefore impossible to produce matter
particles below a certain dimensional threshold (Material Quantum) because of a drastic energy
increase to be spent in the process11 ; hence the serious technological difficulty in carrying out a
III
fine comminution, which is essential in a vast number of processes (e.g. sintering, medicine
production …).
By combining both concepts, i.e. Scale Relativity or Fractal Geometry on the one hand, and
the hypothesis of the existence of a Material Quantum on the other, researchers have recently
formulated some simple Universal Laws (one, two and three-dimensional) in order to calculate
the energy involved in the crushing of matter as a result of impacts and explosions12 . Such laws
comply with thermodynamics principles. Actually, some researchers already realized as far as
ten years ago that there was a kind of universal pattern underlying the crushing processes which
implied different fracture systems and different materials 13 . In the three-dimensional case, for
example, it emerges that energy dissipation takes place not according to a Euclidean domain but
according to a fractal one, which, surprisingly enough, is always included within Euclidean
surfaces and volumes. It is interesting to point out how borderline cases correspond to the
classical cases of structural collapse, namely traditional Fracture Mechanics on the one hand and
Plasticity on the other14 . In addition, it is relevant to this research to highlight how the threedimensional Universal Law succeeds in unifying the three main theories about comminution (i.e.
the Surface Theory15 , the Volume Theory16 and the Third Comminution Theory17 ; see18 ), which,
however, were developed on the basis of deeply different and inherently experimental concepts
so as to ignore the fragment dimensional distribution.
The starting point in the research involved assuming of a fractal probability density
function for the fragment size distribution19 p (r) = D
D
rmin
, where rmin is the typical dimension of
r D+1
the smallest fragment (matter quantum), r is the typical dimension of a generic fragment
(proportional to the cube root of the fragment's volume) and D is the so called fractal dimension
of the distribution. Theoretically such fractal exponent is positive. Experimentally it is possible
to observe that in the vast majority of cases involving the crushing of three dimensional objects
IV
such exponent is comprised between values ranging from 2 to 3 (e.g. disaggregated gneiss
D=2.13, disaggregated granite D=2.22, broken coal D=2.50, projectile fragmentation of quartzite
D=2.55, projectile fragmentation of basalt D=2.56, fault gouge D=2.60, sandy clays D=2.61,
terrace sands and gravels D=2.82, glacial till D=2.88)19 . Theoretically this is equivalent to a
crushing in which the smallest fragments provide the main contribution to the creation of the
fracture surface while the largest ones contribute to defining its volume. All the same, fractal
exponent values outside (i.e. below or above) this interval can be detected in a few cases such as
artificially crushed quartz (D=1.89) or ash and pumice (D=3.54)19 . As far as two-dimensional
objects are concerned, the radius which characterizes the fractal size distribution p (r ) is
proportional to the square root of the typical surface (of constant thickness) of the fragment. For
the most frequent crushing, in which the smallest fragments provide the main contribution to the
creation of the fracture perimeter while the largest ones define the area, the two-dimensional
fractal exponent is comprised between values ranging from 1 to 2. This is experimentally
substantiated: in fact several texts regarding ice floe fragmentation set the values of D as 1.7-1.8,
1.36. and 1.5620 . Likewise a value ranging from 0 to 1 can be expected for the one-dimensional
fractal exponent.
Some simple models19 show how D is proportional to the logarithm of the crushing
probability, i.e. the probability a certain block has to be crushed into sub-blocks and then into
even smaller ones and so on. So, assuming a fractal law (D=const) means assuming a constant
crushing probability at all scales: for the starting block, for sub-blocks and so forth. If the
crushing probability increases, also the fractal exponent becomes bigger. For instance: in passing
from one dimensional to three-axial compression, the fractal exponent rises, starting from an
initial value close to 2, due to the greater confinement to which a greater crushing probability
corresponds20 . The crushing is therefore finer and the fractal exponent bigger. Another example
V
can be found in the case of ice floes, where the fractal exponent seems to increase towards the
ice-sea interface owing to the major confinement and stress set by waves and wind (D increases
starting from 1 for the internal interface areas and reaches 1.8 for the external ones)20 . To sum
up, it is possible to state that, given an equal space dimension (1, 2 or 3) to be taken into
consideration, inferior values can be expected for less confined phenomena - such as explosions;
whereas greater values have to be expected for the more confined events - such as impacts,
especially repeated ones. All this conforms to the full to experimentation. In addition to this
experimental corroboration, some authors have demonstrated that the fractal distribution law is
theoretically a consequence of the Maximum Entropy Principle21 .
0.01 log r
rmax
0.1
r/r max
1
1
D = 2.48
D=2.48
log
M (< r )
M tot
M (< r )
M(<r)/M
tot
(<
0.1
Figure 1: Statistical analysis of mass particle size distribution.
In order to show an example of fragment fractal distribution, Figure 1 illustrates the mass
distribution of fragments (analyzed by employing instruments which exploited diffraction)
following an artificial crushing of heterogeneous material (concrete)22 . The fractal hypothesis
provides, by means of a simple integration originating from the distribution function p (r ) , a
prediction about the total fragment mass with a typical radius minor of a certain value r, such as:
log
M (< r )
r
≅ (3 − D )log
, namely a linear pattern in a bilogarithmic plane with a slope linked
M tot
rmax
VI
to a fractal exponent which is expected to range between the aforesaid values 2 to 3 in such an
instance of three-dimensional crushing. The statistical analysis shown in Figure 1 fit in with the
fractal hypothesis (alignment on a straight line with D=2.48). Fragments are reported in Fig. 2.
Figure 2: Experimental mass particle size distribution.
Resuming the main issue concerning the process energetics, it is surprising to see that the
main dissipations involved in fragmentation are, all the same, proportional to the free surface of
the fragments produced. In addition to the energy dissipated during the breaking off of the
chemical bonds, which − according to Griffith23 − is proportional to the fragment surface, and
actually far inferior to the dissipation causes which will be mentioned below in the following
paragraph, it is possible to detect, in fragmentation under compression (impacts), a high heat
production due to friction among particles: such friction may be assumed to be proportional to
their free surface24 . In fragmentation under traction (explosions), energy is substantially
dissipated via the fragments' kinetic energy. Such dissipation appears to be proportional to the
fragments' surface only in the specific instance when the ejection velocity of such ballistic
projectiles is proportional to the reciprocal of the square root of their typical linear dimension.
Surprisingly enough, this is the case25 . This involves a consequence of paramount importance,
VII
namely that energy dissipation in matter crushing due to impacts and explosions may be unified
and considered proportional to the total free surface created.
Whenever a three-dimensional case is analyzed, such a surface has obviously a fractal
nature, thanks to the dimensional self-similar nature of the particles, and is always comprised
within an Euclidean surface and volume. The theoretical result of this work aims at
demonstrating and unifying - simply but rigorously - the three fundamental laws regarding
comminution by showing their validity also as far as explosive phenomena are concerned and
extending their import to similar events occurring in one and two-dimensional objects. As a
conclusion, the result of the research can be simply summarized as follows for the threedimensional case: W ∝ V D / 3 , being W the energy dissipated, V the fragmented volume and D the
fractal
exponent
of
the
particle
D = 2 for D < 2 , D ≡ D for 2 ≤ D ≤ 3 and
size
dis tribution
set
at
values
2-3.
i.e.
D = 3 for D > 3 . Similar correspondences can be
obtained if two-dimensional objects with A surface and one-dimensional objects with L length
are crushed.
The three Scaling Laws for energy dissipation during fragmentation under impacts or
explosions are the following12 :
W ∝ LD
W∝A
D/2
W ∝V
D/3
(0 ≤ D ≤ 1)
(1 ≤ D ≤ 2 )
(2 ≤ D ≤ 3)
1 − dimensiona l
2 − dimensiona l
3 − dimensiona l.
Applications. As a first example, we can apply the three-dimensional law to the prediction of the
devastated area due to asteroid impacts26,27 , as a function of the energy released in the collision.
The comparison with the experimental Steel’s law28 , based on nuclear weapon tests, shows a
good correspondence. Assuming that the destroyed zones (or fragmented volumes V) are self-
VIII
similar at each scale, the area Ω devastated by an impact is proportional to V 2 / 3 and, being
W ∝ V D / 3 , the theoretical prediction for the devastated area will be Ω ∝ W 2 / D . Steel28 provided
the following formula, based on nuclear weapon tests, for estimating the area of destruction due
to asteroid impacts Ω = 400W 0.67 ,
[Ω ] = [km2 ], [W ] = [Megatons ] .
It appears in good agreement
with the theoretical prediction and, if we assume D ≈ 3 , they practically coincide.
As a second example of application we can considered the size and shape effects on
material properties in compression. We can evaluate the dissipated strain energy density Ψ =
Ψ l
during the compression of a specimen as a function of its characteristic length l:
= 
Ψ0  l 0 
W
V
D −3
where Ψ 0 , l 0 are related to a reference specimen. In addition, if we suppose that the size-effects
on the compressive strength σ C
l 
σ
can be estimated assuming Ψ ∝ σ C2 , we have: C0 =  
σC  l0 
D −3
2
.
Size-effects on strain energy density and on material strength, described by straight lines in a bilogarithmic diagram, are experimentally confirmed29 . The fractal exponent, obtained as a best-fit
parameter by fitting the experimental data, has been found close to 2. Fractal exponents around
two are in fact observed for particle size distribution obtained under uniaxial compression30 . On
the other hand − regarding shape effects in compression − considering specimens with constant
base area l 2 , the specimen slenderness (height h over base side l) can be obtained as
λ=
D− 3
D− 3
V
l2 h h
Ψ
σC
= 3 =
and the shape-effects become
=λ 3 ,
= λ 6 . They predict the
Vλ =1
l
l
Ψλ =1
σ C (λ = 1)
shape effects on dissipated energy density and strength for specimens under compression. The
fractal exponent, obtained as best-fit parameter29 by fitting the experimental data, has been found
again close to 2.
IX
As third and last examp le of application we can considered the power balance for drilling
comminution. Considering a drilling tool and the applied vertical thrust force F (typically
supplied by the operator), the torque M t (typically supplied by the engine) and their dual
displacements δ and ϕ, the power balance for drilling comminution can be written as
Fδ& + M tϕ& = W& + W& f , where W represent the global work dissipated (by fracture and by internal
friction) in comminution processes, W f is the heat production by external friction and the dot
over the symbols represents time derivation22 . It is important to observe how the internal heat
production (substantially by friction) in the comminution process is included in W . Such
quantitiy should be proportional to the new produced free surface and absolutely prevailing over
the fracture work − only about 3% of the total22 . Evaluating the power W& by the fragmentation
law and W& f as dissipated by the external friction forces, the balance can be rewritten as
(
Fδ& + M tϕ& = Γ Abit δ&
)
D/3
+ µFRϕ& , where Γ is the energy dissipated on the fractal free surface of
the material (by fracture and internal friction); Abit is the effective area of the tool ring, µ is the
friction coefficient between the two materials and R the mean radius of the drilling tool. From
experiments on concrete we know that the fractal exponent for drilling detritus is D ≅ 2 and the
fractal drilling strength Γ ≅ 15 MN/ (ms1 / 3 ) . So, we can describe the process from a global point of
view and predict the drilling velocity22,31 .
REFERENCES:
1. Mandelbrot, B. B. The Fractal Geometry of Nature (Freeman, New York, 1982).
2. Feder, J. Fractals (Plenum Publishing Corporation, New York, 1988).
3. Mandelbrot, B. How long is the coast of Britain? Statistical self-similarity and fractional
dimension. Science 156, 636-638 (1967).
4. Mandelbrot, B., Passoja, D. E. & Paullay, A. J. Fractal character of fracture surfaces of metals.
Nature 308, 721-722 (1984).
5. Allégre, C.J., Le Mouel, J.L. & Provost, A. Scaling rules in rock fracture and possible
implications for earthquake prediction. Nature 297, 47-49 (1982).
X
6. Steacy, S.J. & Sammis, C.G. An automaton for fractal patterns of fragmentation. Nature 353,
250-252 (1991).
7. Davy, P., Sornette, A. & Sornette, D. Some consequences of a proposed fractal nature of
continental faulting. Nature 348, 56-58 (1990).
8. Novozhilov, V. On a necessary and sufficient criterion for brittle strength. Prik. Mat. Mek. 33,
212-222 (1969).
9. Gouldstone, A., Krystyn Van Vliet, J., Suresh, S. Simulation of defect nucleation in a crystal.
Nature 411, 656 (2001).
10. Suresh, S. Graded Materials for Resistance to Contact Deformation and Damage. Science
292, 2447-2451 (2001).
11. Kendall, K. The impossibility of comminuting small particles by compression. Nature 272,
711-712 (1978).
12. Carpinteri, A. & Pugno, N. One- two and three-dimensional universal laws for fragmentation
due to impact and explosion. J. Appl. Mech. 69, 854-856 (2002).
13. Bouchaud, E., Lapasset, G. & Planes, G. Fractal dimension of fractured surfaces: a universal
value? Europhys. Lett. 13, 73-79 (1990).
14. Carpinteri, A. Structural Mechanics - A Unified Approach (E & FN Spon, 1997).
15. von Rittinger, P. R. Lehrbuch der Aufbereitungskunde (Berlin, 1867).
16. Kick, F. Das Gesetz der Proportionalen Widerstände (Leipzig, 1885).
17. Bond, F. C. The third theory of comminution. Mining. Enginee., 4, 484-494 (1952).
18. Béla Beke, D. Principles of Comminution (Publishing House of the Hungarian Academic of
Sciences, Budapest, 1964).
19. Turcotte, D. L Fractals and Chaos in Geology and Geophysics (Cambridge University Press,
Cambridge, 1992).
20. Weiss, J. Fracture and fragmentation of ice: a fractal analysis of scale invariance. Enginee.
Fract. Mech. 68, 1975-2012 (2001).
21. Engleman, R., Rivier, N. & Jaeger, Z. Size distribution in sudden breakage by the use of
entropy maximization. J. Appl. Phys. 63, 4766-4768 (1988).
22. Carpinteri, A. & Pugno, N. A fractal comminution approach to evaluate the drilling energy
dissipation. Numerical and Analytical Methods in Geomechanics 26, 499-513 (2002).
23. Griffith, A. A. The phenomeno n of rupture and flow in solids. Philosoph. Trans. of the Royal
Society, London, A221, 163-198 (1921).
24. Smekal, A. Physikalisches und technisches Arbeitsgesetz der Zerkleinerung (Zeitschr. VDI,
Beiheft Verfahrenstechnik, 1937).
25. Nakamura, A., & Fujiwara, A. Icarus 92, 132- (1991).
26. Asphaug, E., Ostro, J. S., Hudson, R. S., Scheeres, D. J. & Benz, W. Disruption of kilometresized asteroids by energetic collisions. Nature 393, 437-440 (1998).
27. Ryder, G. Glass beads tell a tale of Lunar bombardment. Science 287, 1768-1769 (2000).
28. Steel, D. Rogue Asteroids and Doomsday Comets (John Wiley & Sons Inc., New York,
1995).
29. Carpinteri, A. & Pugno, N. Fractal fragmentation theory for shape effects of quasi-brittle
materials in compression. Mag. of Concrete Research 54(6), 473-480 (2002).
30. Momber, A.W. The fragmentation of standard concrete cylinders under compression: the role
of the secondary fracture debris. Eng. Fract. Mech. 67, 445-459 (2000).
31. Carpinteri, A. & Pugno, N. A multifractal comminution approach for drilling scaling laws.
Powder Technology 131(1) 93-98 (2003).
XI
JOB POSITIONS
FACULTY POSITIONS (Tenure-Track)
MECHANICAL AND MATERIALS ENGINEERING
The Department of Mechanical and Materials Engineering (MME) at Florida International
University (FIU) is seeking applications for two tenure track positions (open rank) in broad areas
of mechanical engineering with expertise in computational science and engineering. Candidates
must have strong background in thermo-fluid sciences, micro-mechanics or material sciences
with research emphasis on multi-disciplinary mathematical modeling, numerical simulation,
design methodologies, evolutionary optimization, robust control, and visualization of engineering
systems. Desirable experience includes, but is not limited to, numerical methods for continuum
models and/or ab initio molecular dynamics and massively parallel processing with applications
to contemporary and emerging areas such as nanotechnology, MEMS/NEMS, micro-machines,
and systems with multi-scale features.
Applicants should have a doctoral degree in mechanical engineering or a related discipline and
should be able to teach undergraduate and graduate courses in mechanical or materials
engineering. Postdoctoral research and/or teaching experience are highly desirable. The
positions are available starting Fall 2004.
FIU is the state university in Miami, Florida, with more than 34,000 students. The university has
achieved Carnegie Doctoral/Research Universities-Extensive status and was ranked in the top
100 of the country’s public national universities. Information on the Department can be found on
the Internet at http://www.eng.fiu.edu/me/. MME is one of the six departments of the College of
Engineering at FIU. The College is undergoing major expansion involving several new
academic and research programs. The most recent initiatives are in biomedical engineering and
nanotechnology, nano-electronics and entrepreneurship.
Nominations or applications should be sent by regular mail or e-mail to:
Professor Kinzy Jones, Chair, Search and Screen Committee
Department of Mechanical and Materials Engineering
Florida International University
10555 W. Flagler Street EC 3442
Miami, FL 33174
[email protected]
A review of applications will begin on January 15, 2004, and will continue until the position is
filled. The application materials should include curriculum vitae, teaching and research
experience, a vision statement, and a list of at least five references. Additional information may
be obtained via e-mail: [email protected] and by visiting the FIU home page: http://www.fiu.edu.
FIU is an equal access/equal opportunity employer and institution.
XII
ANNOUNCMENTS
Minutes of the 66th Meeting of the Board of Directors,
Meeting of the Fellows, and Open Meeting of the Members
The 66th Meeting of the Board of Directors, Meeting of the Fellows, and Open
Meeting of the Members was held in Washington, DC on November 18, 2003 from 3 to
6 PM, in conjunction with the 2003 ASME International Mechanical Engineering
Congress and Exposition.
Present: T. Belytshcko, H. Espinosa, S. Datta, L. Wheeler (Chair), A. Leissa, C. W.
Smith, R. Abeyartne, R. Batra, D. Mook, S. Crandall, C. Taylor, K. Chong, J.
Achenbach., M. Ostoja-Starzewski
The chair called the meeting to order at 3:00PM. In view of the large number of
Fellows present, the chair ruled that the business of Fellows be conducted first. The
chair appointed S. Datta, C. W. Smith and R. C. Batra to count the ballots for the
Fellow’s election. By a unanimous vote of those present, the following three persons
were declared elected to the Fellows grade: M. W. Hyer, V. Kinra, and K. Liechti.
Certificates will be mailed to them in the near future. It was decided that two fellows will
be elected in 2004.
During the meeting of the Board of Directors, Crandall moved that the
administrative assistant, Sally Shrader, be given a 10% raise effective January 1, 2004.
Batra seconded the motion. It passed unanimously.
After a lengthy discussion of the financial condition of the Academy, it was
decided that for the calendar year 2004, the print version of the Mechanics journal will
only have review articles, open position announcements, and call for papers. Professor
Espinosa, the Editor of Mechanics, made a motion that the journal contents be put on
the AAM website and no longer printed. The motion was seconded and unanimously
approved by the Board. Professor Espinosa will keep track of the number of hits to the
Academy’s webpage and also to the journal contents. He will report to the Board at its
next meeting at which time it will be decided whether or not to continue compiling
journal contents.
M. Ostoja-Starzewski briefed every one present on the PACAM meeting to be
held in Havana in January 2004. J. Achenbach quoted the notice on the Treasury
Dept.’s webpage on obtaining a Visa to Cuba. A possibility is to fly to Cancun, Mexico
and then to Havana and not spend any money in Havana. The other possibility is for
the AAM to be headquartered outside the USA.
Steve Crandall, chairman of the AAM Awards Committee, announced the following
awards: Distinguished Service Award: John Dundurs; Junior Achievement Award: Tarek
I. Zohdi
The chair thanked Steve Crandall for having served so admirably as the chair of the
Academy’s Award Committee.
XIII
Action Items:
Ø A committee comprised of Charlie Bert (Chair) , Frank Moon and Millard Beatty
should nominate a candidate for the President of the Academy in 2005. The
nomination should be sent to the Secretary by 1 January.
Ø Lewis Wheeler will nominate one person to replace S. Crandall on the
Academy’s Award Committee. Professor J. Tins ley Oden will chair the
committee in 2004.
Ø Lewis Wheeler will discuss with Charles Steele the procedure to be followed to
obtain a Visa to Cuba.
Ø Lewis Wheeler will discuss with Charles Steele the bid from Brazil to host
PACAM in 2006.
Next Meeting:
It was decided that the next meeting of the Board of Directors will be held in Warsaw,
Poland in conjunction with the ICTAM meeting.
All present voted to adjourn the meeting at 5:30PM.
ASCE Theodore von Karman Medal
Pol D. Spanos, an AAM Fellow (1995), is the recipient
of the Theodore von Karman Medal from ASCE for his
significant contributions to innovative analytical and
numerical tools for studying a wide spectrum of
engineering systems subject to arandom fields and
exhibiting non-linear behavior. The Theodore von
Karman Medal is presented to an individual,
irrespective of particular societal affiliation, for
distinguished achievement in Engineering Mechanics
that is applicable to any branch of civil engineering.
Spanos is a Professor of Civil and Mechanical
Engineering and has held the L.B. Ryon
Endowed
Chair in Engineering at Rice University since 1988. He has written more than 250
archival journal and conference papers, and has authored/edited 18 volumes on
dynamics and vibrations of structural and mechanical systems; he has served as
committee chair for more than 36 M.S. and 28 Ph.D. students. He is the Editor-in-Chief
of the International Journal of Non-Linear Mechanics and the Co-Editor or the
International Journal of Probabilistic Engineering Mechanics. His honors include
Fellow of ASCE and of ASME, Chair of the ASCE - EMD and of the ASME- AMD
divisions, NSF’s Presidential Young Investigator Award (1984), Alexander von
Humboldt Senior Research Prize (1995), International Association for Structural Safety
and Reliability Research Prize (1997), ASCE’s Alfred M. Freudenthal Medal (1992) and
Nathan M. Newmark Medal (1999)., and ASME’s Pi Tau Sigma (1982) and Larson
Memorial (1991) achievements awards.
XIV
BIOGRAPHICAL SKETCHES OF THE AMERICAN ACADEMY
OF MECHANICS FELLOWS ELECTED IN NOVEMBER 2003
Professor Michael W. Hyer is a Professor in the Department of Engineering Science
and Mechanics at the Virginia Polytechnic Institute and State University, where he has
been on the faculty since 1978. Previously, he was at the Boeing Company as a Lead
Engineer (1966-70), on the faculty in the Mechanical Engineering and mechanics
department, Old Dominion University (1975-78), and in the Mechanical Engineering
Department, University of Maryland (1985-87). Currently, he is the Interim Co-Director,
Center for Composite Materials and Structures, VPI and State University.
He received a B.S. cum laude in Aerospace Engineering from the State University of
New York, Buffalo, an M.S. in Engineering Science from Purdue University, and a Ph.D.
in Aerospace Engineering from the University of Michigan.
His primary research interests are in the area of the mechanics of composite materials
and structures and the current research interests include geometrically nonlinear effects
in composite structures, with emphasis on the interaction of thermal and mechanical
effects, particularly the elastic couplings unique to composite materials. He is author of
the McGraw-Hill text entitled Stress Analysis of Fiber-Reinforced Composite Materials.
He is the past President and a Fellow of the American Society for Composites, a Fellow
of the American Society of Mechanical Engineers, and an Associate Fellow of the
American Institute of Aeronautics and Astronautics. Professor Hyer has been active in
many technical society committees and serves on the editorial boards of several
technical journals. The citation for the American Academy of Mechanics Fellow Award is
“for contributions to research and education in the field of composite materials and
structures.”
Professor Vikram K. Kinra is the General Dynamics Professor, Department of
Aerospace engineering, Texas A&M University, where he has been on the faculty since
1982. Previously, he was on the faculty in the Mechanical Engineering Department,
University of Colorado, Boulder (1975-82), and was a Visiting Scientist at the Wright
Patterson Air Force Base (1997-98). He served as the Associate Director (1990-95) and
Director (1995-98), TEES Center for Mechanics of Composites.
He received a B.S. in Mechanical Engineering from the Indian Institute of Technology,
Kanpur, India, an M.S. from Utah State University, and a Ph.D. in Engineering
Mechanics from Brown University.
His primary research interests are in the field of solid mecha nics in general and in
mechanics of composite materials in particular. He has made significant research
contributions in mechanics and mechanisms of material damping, ultrasonic
nondestructive evaluation, and fracture mechanics. He is an Associate Fellow o f the
American Institute of Aeronautics and Astronautics and a Fellow of the American
Society of Mechanical Engineers. Professor Kinra has been active in many technical
society committees and serves as an Associate Technical Editor of Journal of Applied
Mechanics and Experimental Mechanics. He is the recipient of two national awards for
XV
excellence in teaching: the Dow Outstanding Young Faculty Award and the Ralph R.
Teetor Educational Award. The citation for his American Academy of Mechanics Fellow
Award is “for his pioneering research contributions in ultrasonic nondestructive
evaluation and wave propagation.”
Professor Kenneth M. Liechti is a Professor in the Aerospace Engineering and
Mechanics Department, University of Texas at Austin, where he has been on the faculty
since 1982. Previously, he was a Research Scientist at the General Dynamics Fort
Worth Division.
He received his B. Sc. degree (First Class Honors) in Aeronautical Engineering from the
University of Glasgow, Scotland, and M. S. in Aeronautics and Ph. D. in Aeronautics
from the California Institute of Technology.
His primary research interests have been in the mechanics of adhesion and failure of
bimaterial interfaces and bonding, and nonlinear mechanics of viscoelastic materials.
He has co-authored (with A.M. Bedford) a textbook, Mechanics Of Materials. He is a
Fellow of the American Society of Mechanical Engineers, the Society of Experimental
Mechanics and the Adhesion Society. Professor Liechti has been active in the American
Society of Mechanical Engineers and the Society of Experimental Mechanics, serving
as an Associate Editor of the Journal of Applied Mechanics and Experimental
Mechanics. The citation for the American Academy of Mechanics Fellow Award is “for
fundamental contribution to the mechanics and physics of decohesion of interfaces and
bond joints.”
XVI
Founders Prize and Grant
Up to $10,000 For the Academic Year 2004-2005
(Deadline: July 1, 2004)
The American Academy of Mechanics is pleased to announce the availability of a
Founder’s Prize and Grant to be awarded in September 2004 to a doctoral candidate in
the field of Mechanics. Funding has been arranged by the Robert M. and Mary
Haythornthwaite Foundation through the good offices of Professor Haythornthwaite,
founder and first President of the Academy. The award will be made on the
recommendation of an AAM committee. The prize consists of a Certificate and $1,000
that will be presented at the annual meeting of the Academy, usually held in November.
The Grant will be made to that same person in two installments, $6,000 in September
2004 and up to $3,000 in January 2005, the latter dependent on the size of the
approved budget and receipt by the AAM committee of an acceptable progress report.
In order to encourage contestants to think constructively about the impact of new and
pending developments, they will be asked to compose an original essay of no more
than a thousand words under the title “Progress through Mechanics”. The winning essay
will be published in mechanics. The award is open to those who, as of July 1, 2004, are
registered as graduate students at a degree granting institution within the Americas,
have completed at least one year of full-time graduate study at that institution, have
been assigned a thesis advisor at the institution and have had a doctoral thesis topic
emphasizing mechanics approved by the institution following candidacy or equivalent
procedures. There are no restrictions with regard to citizens hip, residency, race,
religion, or sex. Letters of support will be required of the thesis advisor and in addition
one from either a Member or a Fellow of AAM. Contestants will be judged on the basis
of the essay, plans, references and academic history. The intent of the Grant is to
support the research of the student through an approved combination of equipment
purchases, information access, travel, etc., but not routine living expenses or fees.
Detailed rules for the competition will be issued soon: to receive them, express your
interest to the committee by FAX to (215) 204-6936, or by writing to:
AAM Founders Prize and Grant Committee
c/o Civil and Environmental Engineering Department
Temple University (084-53)
Philadelphia, PA 19122
XVII
Tenth Conference
on
NONLINEAR VIBRATIONS, STABILITY, AND DYNAMICS OF STRUCTURES
July 25-29, 2004
Donaldson Brown Hotel & Conference Center
Virginia Polytechnic Institute and State University
Blacksburg, VA 24061
GENERAL INFORMATION:
The tenth conference in this series will be held at the Donaldson Brown Continuing Education Center at
VPI&SU on July 25-29, 2004. The scope of the conference includes:
•
•
•
•
•
•
•
•
•
•
Multibody dynamics,
MEMS,
Dynamics of composite structures,
Adaptive structures,
Fluid/structure interactions,
Parametric vibrations: single- and multi-frequency excitations of single- and multi-degree-of-freedom
systems,
Computational techniques: efficient algorithms, use of symbolic manipulators, integration of symbolic
manipulation and numerical methods, and use of parallel processors,
Experimental methods: benchmark experiments, measurements in hostile environments, and
instrumentation techniques,
Influence of nonlinearities on control systems, and
Identification of nonlinear systems.
Authors will have the option of having their full-length papers considered for publication in NONLINEAR
DYNAMICS or THE JOURNAL OF VIBRATION AND CONTROL. To accelerate the reviewing process,
we will select referees from those who will attend the conference and mail the manuscripts to them before
the meeting.
DEADLINES:
The deadline for two-page abstracts is February 15, 2004.
The deadline for full-length papers is May 1, 2004.
The deadline for conference registration is June 14, 2004.
The deadline for cancellations is 5PM June 14, 2004.
For updates and more information on Early Confirmation, Registration, and Lodging, please refer
to our website at: http://www.esm.vt.edu/~anayfeh/
A block of lodging rooms is being held at the Donaldson Brown Hotel & Conference Center. The
lodging rate for this conference is US$76.00 plus applicable taxes. Participants are responsible
for making their own lodging arrangements. Lodging reservations should be made by June 27,
2004. Lodging: http://www.dbhcc.vt.edu/
Professor Ali H. Nayfeh
Department of Engineering Science and Mechanics, MC 0219
Virginia Polytechnic Institute and State University
Blacksburg, VA 24061 - USA
Telephone: (540)231-6871 | FAX: (540)231-2290 | EMAIL: [email protected]
XVIII
IU
International Congress
AM
of Theoretical and Applied Mechanics
August 15 - 21, 2004 ♦ Warsaw, Poland
President:
Witold Gutkowski
PAN, Warszawa
Co-Chairman:
Michal Kleiber
IPPT PAN, Warszawa
Co-Chairman:
Wlodzimierz Kurnik
Politechnika Warszawska
Secretary-General:
Tomasz Kowalewski
IPPT PAN, Warszawa
First Announcement and Call For Papers
http://ictam04.ippt.gov.pl
SCIENTIFIC PROGRAM
Congress participants are encouraged to submit a paper. Papers are sought for all topics corresponding to PreNominated Session or Mini-Symposium subject matters. The paper must be in English and should present material
that is novel and preferably unpublished at the time of the Congress. All papers presented at the Congress are by
invitation based on the recommendation of the International Papers Committee. No author will be invited to present
more than one paper. Prospective authors are asked to submit only one paper for consideration.
MINI-SYMPOSIA
Smart materials and structures ? Tissue, cellular and molecular biomechanics ? Mechanics of thin films and
nanostructures ? Microfluidics ? Microgravity flow phenomena ? Atmosphere and ocean dynamics
Pre-Nominated Sessions:
IN FLUID MECHANICS
Biological fluid dynamics ? Boundary layers ? Combustion and flames ? Complex and smart fluids ? Compressible
flow ? Computational fluid dynamics (jointly with IACM) ? Convective phenomena ? Drops and bubbles ?
Environmental fluid mechanics ? Experimental methods in fluid mechanics ? Flow control ? Flow in porous media
? Flow instability and transition ? Flow in thin films ? Fluid mechanics of materials processing ? Granular flows ?
Low-Reynolds-number flow ? Magnetohydrodynamics ? Multiphase flows ? Solidification and crystal growth ?
Stirring and mixing ? Fluid mechanics of suspensions ? Topological fluid mechanics ? Turbulence ? Vortex
dynamics ? Waves
IN SOLID MECHANICS
Computational solid mechanics (jointly with IACM) ? Contact and friction problems (jointly with IAVSD)??
Control of multibody systems ? Control of structures ? Damage mechanics ? Dynamic plasticity of structures ?
Elasticity ? Experimental methods in solid mechanics ? Fatigue ? Fracture and crack mechanics (jointly with ICF)
? Functionally graded materials ? Impact and wave propagation ? Material instabilities ? Mechanics of composites
? Mechanics of phase transformations (jointly with IACM) ? Mechanics of porous materials ? Multibody dynamics
? Plasticity and viscoplasticity ? Plates and shells (jointly with IACM) ? Rock mechanics and geomechanics ?
Solid mechanics in manufacturing ? Stability of structures ? Stochastic micromechanics ? Structural optimization
(jointly with ISSMO) ? Structural vibrations ? Viscoelasticity and creep
TOPICS INVOLVING BOTH FLUID MECHANICS AND SOLID MECHANICS
Acoustics ? Chaos in fluid and solid mechanics ? Continuum mechanics ? Fluid-structure interaction ? Mechanics
of foams and cellular materials ? Multiscale phenomena in mechanics
Correspondence related to the Congress should be sent to:
Prof. Tomasz Kowalewski, ICTAM04 Secretary-General
Institute of Fundamental Technological Research
Swietokrzyska 21, 00-049 Warszawa, Poland
e-mail: [email protected]
XIX
CALL FOR PROPOSALS TO HOST AN
IUTAM SYMPOSIUM
or
INSTRUCTIONAL SUMMER SCHOOL
in 2006 or 2007
The United States National Committee on Theoretical and Applied Mechanics (USNC/TAM) seeks
proposals from U. S. authors and institutions to host IUTAM Symposia or Instructional Summer Schools in
2006 or 2007. Information for proposals from the United States can be found on the USNC/TAM website
at: http://www7.nationalacademies.org/usnctam. IUTAM provides a small amount of financial support for
symposia and summer schools. US organizers are strongly encouraged to seek additional financial
support from other sources. The primary use of financial support is to help with travel expenses for
younger scientists and for scientists from developing countries.
IUTAM Symposia
The goal of an IUTAM Symposium is to assemble a group of active scientists, within a well-defined field,
for the development of science in that field. Participation is by invitation only. In order to achieve effective
communication within the group it should, typically, be limited to 60-80 scientists with expertise in the
subject area of the symposium. Symposia typically consist of a few invited lectures, and a larger number
of contributed papers, presented as lectures and/or posters, all pre-screened by the Symposium Scientific
Committee.
IUTAM Instructional Summer Schools
The purpose of an IUTAM Instructional Summer School is to provide lectures by leading experts in a new
or emerging field of science and engineering in order to foster developments in that field. Schools are
typically 3–5 days in length and intended primarily for younger scientists and those with only limited
knowledge in the specific field of the school. Participation of is by invitation only.
Proposal Submission
Proposals from the United States to host a symposium or summer school should be submitted on the
appropriate two-page Proposal Submission Form available on the USNC/TAM website. The completed
proposal should be sent electronically to the USNC/TAM Secretary ([email protected]) no later than
January 15, 2004. Proposers may submit their proposals directly to IUTAM. However, experience has
shown that proposals benefit from the feedback provided by USNC/TAM, and that the recommendation of
USNC/TAM when the proposal is finally submitted to IUTAM carries considerable weight.
Final Approvals
Proposals will be assessed by the USNC/TAM and then forwarded to IUTAM where they are reviewed by
IUTAM panels. The IUTAM General Assembly will vote on the panel recommendations in August 2004 at
the International Congress on Theoretical and Applied Mechanics in Warsaw, Poland
(http://ictam04.ippt.gov.pl/).
XX
ADVERTISEMENT POLICY
Upon the decision of the Board of Directors, an advertisement for a position opening is
charged a flat rate of $200. Payment must be done only by check to the order of
American Academy of Mechanics and sent to:
Horacio D. Espinosa, Editor
Northwestern University
2145 Sheridan Road
Evanston, IL 60208
E-mail: [email protected]
The FID number for AAM is 23-7045163. Make check payable to American Academy of
Mechanics. Announcements for forthcoming events, conferences, and workshops are
free of charge. Advertisements may be sent by FAX or e-mail (MSWord, PDF or plain
text). Logo of the institution may be included if the graphic file is provided.
Mechanics is a bi-monthly magazine. To be considered for publication in forthcoming
issues, an advertisement must be received one month in advance of the publication
date. For example, an advertisement must be received before the end of November to
appear in the January-February issue. Please note that the magazine is distributed at
the beginning of the two-month period. The advertisement will continue to appear in
future issues until the deadline of the position opening.
Visit the AAM website to read recent advertisements of position openings and past
issues of Mechanics at www.AAMech.org.
MECHANICS On-line
To access Mechanics on-line, please visit
www.AAMech.org
Access to the on-line issues is for AAM members. A username and password is
required to access the on-line issues. If you did not receive the username and
password, please send an e -mail to:
[email protected]
1
Acta Materialia
4669
4679
4693
4707
4719
4737
4751
4761
4773
4783
4791
4803
4815
4823
4837
4847
4863
4871
4881
4897
4907
4919
4929
4939
Dislocation induced line-broadening in cold-worked pb-bi binary alloy system in
the alpha-phase using x-ray powder prole analysis
The role of crystallographic and geometrical relationships between alpha and beta
phases in an alpha/beta titanium alloy
The eect of texture on ridging of ferritic stainless steel
Deformation and fracture of cu-sio2 bicrystals with (011) twist boundaries
On the inuence of the grain boundary misorientation on the plastic deformation
of aluminum bicrystals
An objective study of substructural boundary alignment in aluminium
Eect of mg addition on the creep and yield behavior of an al-sc alloy
Phase eld study of grain boundary eects on spinodal decomposition
Electric fracture and polarization switching properties of piezoelectric ceramic
pzt studied by the modied small punch test
Elasticity-based model of the variant selection observed in the beta to alpha phase
transformation of a zircalloy-4 sample
Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium aa5083 friction stir welds
Mechanical properties of al(sc,zr) alloys at ambient and elevated temperatures
Sintering of fe2nio4 with an internal binder: a way to obtain a very dense material
Application of mean-eld approximation to elastic-plastic behavior for closed-cell
metal foams
Reactive growth of niobium silicides in bulk diusion couples
The evolution of dislocation density during heat treatment and creep of tempered
martensite ferritic steels
Elastic anisotropy of rafted ni-base superalloy at high temperatures
Metal substrate eects on the thermochemistry of active brazing interfaces
Failure behavior and failure criterion of conductive cracks (deep notches) in thermally depoled pzt-4 ceramics
The inuence of surface structure on wetting of alpha-al2o3 by aluminum in a
reduced atmosphere
A model for transformation plasticity during bainite transformation of steel under
external stress
Development of high strength and strongly cube textured ni-4.5 percent w/ni-15
percent cr composite substrate for coated conductor application
On tearing of ductile polymer lms using the essential work of fracture (ewf)
method
Acicular alpha(2) precipitation induced by capillarity at alpha/beta phase boundaries in ti-14al-2zr-3sn-3mo-0.5si titanium alloy
51(16) 2003
Dey SN. Chatterjee P. Sen Gupta SP.
Bhattacharyya D. Viswanathan GB. Denkenberger R. Furrer D. Fraser HL.
Shin HJ. An JK. Park SH. Lee DN.
Miura H. Sakai T. Toda H.
Zaeerer S. Kuo JC. Zhao Z. Winning M.
Raabe D.
Hurley PJ. Bate PS. Humphreys FJ.
Marquis EA. Seidman DN. Dunand DC.
Ramanarayan H. Abinandanan TA.
Shindo Y. Narita F. Horiguchi K. Magara Y.
Yoshida M.
Humbert M. Gey N.
Peel M. Steuwer A. Preuss M. Withers PJ.
Fuller CB. Seidman DN. Dunand DC.
Domenichini B. Caillot T.
Kitazono K. Sato E. Kuribayashi K.
Milanese C. Buscaglia V. Maglia F. AnselmiTamburini U.
Pesicka J. Kuzel R. Dronhofer A. Eggeler G.
Ichitsubo T. Koumoto D. Hirao M. Tanaka K.
Osawa M. Yokokawa T. Harada H.
Arroyave R. Eagar TW.
Zhang TY. Wang TH. Zhao MH.
Shen P. Fujii H. Matsumoto T. Nogi K.
Han HN. Suh DW.
Sarma VS. Eickemeyer J. Singh A. Schultz L.
Holzapfel B.
Wong JSS. Ferrer-Balas D. Li RKY. Mai YW.
Maspoch ML. Sue HJ.
Huang AJ. Li GP. Hao YL. Yang R.
Acta Materialia
4953
4965
4977
4991
5001
5013
5021
5037
5051
5063
5073
5083
Interfacial segregation, nucleation and texture development in 3 percent silicon
steel
Piezoelectric sensitivity of pbtio3-based ceramic/polymer composites with 0-3
and 3-3 connectivity
Microstructural characterization of in situ tic/al and tic/al-20si-5fe-3cu-1mg composites prepared by spray deposition
Diusion induced grain boundary migration in the cu-cd system
Coarsening of gamma ' in ni-al alloys aged under uniaxial compression: i. earlystage kinetics
Coarsening of gamma ' in ni-al alloys aged under uniaxial compression: ii. diusion under stress and retardation of coarsening kinetics
Coarsening of gamma' in ni-al alloys aged under uniaxial compression: iii. characterization of the morphology
Precipitation processes in an al-2.5cu-1.5mg (wt. percent) alloy microalloyed with
ag and si
Hybrid modelling of aluminium-magnesium alloys during thermomechanical processing in terms of physically-based, neuro-fuzzy and nite element models
Ferroelasticity in mixed conducting lacoo3 based perovskites: a ferroelastic phase
transition
Slip geometry of dislocations related to cutting of the gamma ' phase in a new
generation single-crystal superalloy
Reducing the thermal expansion anisotropy in mo5si3 by nb and v additions:
theory and experiment
51(17) 2003
Heo NH. Kim SB. Choi YS. Cho SS. Chai KH.
Bowen CR. Topolov VY.
Yang B. Wang F. Zhang JS.
Gupta BK. Madhuri MK. Gupta SP.
Prikhodko SV. Ardell AJ.
Ardell AJ. Prikhodko SV.
Prikhodko SV. Ardell AJ.
Raviprasad K. Hutchinson CR. Sakurai T.
Ringer SP.
Zhu Q. Abbod MF. Talamantes-Silva J. Sellars
CM. Linkens DA. Beynon JH.
Orlovskaya N. Browning N. Nicholls A.
Zhang JX. Murakumo T. Koizumi Y.
Kobayashi T. Harada H.
Fu CL. Schneibel JH.
2
5093
5101
5113
Irradiation induced alloying lms in co-mo system during nd formation of amorphous ion beam assisted deposition
Eect of ordering process on giant pseudoelasticity in fe3al single crystals
5123
5131
5151
Eect of metal layer thickness on the decohesion of high purity copper-sapphire
interfaces
Hydrothermal degradation of cubic zirconia
A model for the yield strength of overaged al-zn-mg-cu alloys
Secondary precipitation in al-zn-mg-(ag) alloys
5159
Some critical experiments on the strain-rate sensitivity of nanocrystalline nickel
5173
Computer simulation of spinodal decomposition in constrained ms
5187
5199
Microstructure and room temperature strength of fe-40al containing nanocrystalline oxide particles
Structure-property relationship of a spray formed al-y-ni-co alloy
5211
Stress generation mechanisms in carbon thin lms grown by ion-beam deposition
5223
In situ formed ti-cu-ni-sn-ta nanostructure-dendrite composite with large plasticity
Zhao B. Yang GH. Zeng F. Pan F.
Yasuda HY. Nakano K. Nakajima T. Ueda M.
Umakoshi Y.
Hasegawa M. Zhu SJ. Kagawa Y. Evans AG.
Guo X. He JQ.
Starink MJ. Wang SC.
Macchi CE. Somoza A. Dupasquier A. Polmear
IJ.
Schwaiger R. Moser B. Dao M. Chollacoop N.
Suresh S.
Seol DJ. Hu SY. Li YL. Shen J. Oh KH. Chen
LQ.
Munoz-Morris MA. Oca CG. Morris DG.
Golumbfskie WJ. Amateau MF. Eden TJ.
Wang JG. Liu ZK.
Zhang SL. Johnson HT. Wagner GJ. Liu WK.
Hsia KJ.
He G. Loser W. Eckert J.
Acta Materialia
5235
5255
5263
5285
Deformation twinning in monazite
(120) and (12(2)over-bar) monazite deformation twins
Segregation during solidication with spongy deformation of the mushy zone
Phase stability of bcc zr in nb-zr thin lm multilayers
5295
Modelling the thermal oxidation of ternary alloys - compositional changes in the
alloy and the development of oxide phases
Eect of temperature on the devitrication kinetics of niti lms
5309
5319
5335
5349
5359
5375
5385
5399
5413
5425
5439
5447
5467
5477
5489
5499
5519
5529
5545
5555
5571
Eects of pores and interfaces on eective properties of plasma sprayed zirconia
coatings
Hardening precipitation in a mg-4y-3re alloy
Eect of internal stresses on the fracture toughness of a tial-based alloy with
duplex microstructures
Direct in situ measurements of bridging stresses in cfccs
A study of the surface deformation behaviour at grain boundaries in an ultralow-carbon steel
A comparison of the phenomenological theory of martensitic transformations with
a model based on interfacial defects
Yield surface of a simulated metallic glass
Xps study of the surface chemistry of conventional hot-dip galvanised pure zn,
galvanneal and zn-al alloy coatings on steel
Variational self-consistent estimates for texture evolution in viscoplastic polycrystals
Models of melting and liquid structure based on rotationally free atomic clusters
Simulation of the three-dimensional morphology of solidication porosity in an
aluminium-silicon alloy
Constrained thermoelastic martensitic transformation studied by modulated dsc
A procedure for identifying the plastic behavior of single crystals from the local
response of polycrystals
Sensitivity of transfer functions of transport of hydrogen in elastic metals to the
uncertainty of their parameters
A level set method for dislocation dynamics
A cellular automaton investigation of the transformation from austenite to ferrite
during continuous cooling
Twinning and detwinning of ( 0 1 1 ) type ii twin in shape memory alloy
Bonding characteristics of micro-alloyed b2nial in relation to site occupancies and
phase stability
The mechanism of formation of nanostructure and dissolution of cementite in a
pearlitic steel during high pressure torsion
Thickness eect on shape memory behavior of ti-50.0at.percent ni thin lm
51(18) 2003
Hay RS. Marshall DB.
Hay RS.
Lesoult G. Gangin CA. Niane NT.
Thompson GB. Banerjee R. Dregia SA. Fraser
HL.
Nijdam TJ. Jeurgens LPH. Sloof WG.
Vestel MJ. Grummon DS. Gronsky R. Pisano
AP.
Wang Z. Kulkarni A. Deshpande S. Nakamura
T. Herman H.
Antion C. Donnadieu P. Perrard F. Deschamps
A. Tassin C. Pisch A.
Guo FA. Ji V. Francois M. Zhang YG.
Dassios KG. Galiotis C. Kostopoujos V. Steen
M.
Chandrasekaran D. Nygards M.
Pond RC. Celotto S. Hirth JP.
Lund AC. Schuh CA.
Feliu S. Barranco V.
Liu P. Gilormini P. Castaneda PP.
Han JH. Kim DY.
Atwood RC. Lee PD.
Zheng YJ. Schrooten J. Cui LS. Van Humbeeck J.
Hoc T. Crepin J. Gelebart L. Zaoui A.
Zoltowski P.
Xiang Y. Cheng LT. Srolovitz DJ. E WN.
Zhang L. Zhang CB. Wang YM. Wang SQ. Ye
HQ.
Liu Y. Xie ZL.
Hao YL. Yang R. Hu QM. Li D. Song Y. Niinomi M.
Ivanisenko Y. Lojkowski W. Valiev RZ. Fecht
HJ.
Ishida A. Sato M.
5579
5587
5593
5601
5613
5627
Thermal strain in mg composites
Solute drag in ternary solid solutions
Synthesis and characterization of nanoparticles of alnico alloys
The onset and blocking of < 0 1 1 > slip in nial
Constitutive analysis of the high-temperature deformation of ti-6al-4v with a
transformed microstructure
A proper orthogonal decomposition approach to microstructure model reduction
in rodrigues space with applications to optimal control of micro structure-sensitive
properties
Rudajevova A. Lukac P.
Brechet YJM. Purdy GR.
Li XG. Chiba A. Sato M. Takahashi S.
Sun YQ. Yang N.
Kim JH. Semiatin SL. Lee CS.
Acharjee S. Zabaras N.
Acta Materialia
5647
5649
5675
5711
5743
5775
5801
5823
5837
5867
5881
5907
5941
5961
5981
6001
6007
The golden jubilee issue - selected topics in materials science and engineering past, present and future - preface
Electron theory in materials modeling [review]
Modelling the evolution of phase boundaries in solids at the meso- and nano-scales
[review]
Atomistic modeling of mechanical behavior [review]
Mechanical behavior of nanocrystalline metals and alloys [review]
Progress in structural materials for aerospace systems
Designing hybrid materials
Designing synthetic optical media: photonic crystals
Materials issues in microelectromechanical devices: science, engineering, manufacturability and reliability
Viruses as vehicles for growth, organization and assembly of materials
The biomechanics toolbox: experimental approaches for living cells and
biomolecules [review]
Recent advances and future directions in magnetic materials [review]
Ferroelectric perovskites for electromechanical actuation [review]
Gallium nitride and related materials: challenges in materials processing
Fuel cell materials and components
Fifty years of materials research papers through the pages of acta metallurgica/materialia
Acta metallurgica, inc./acta materialia, inc. 1953-2002
51(19) 2003
Suresh S.
Pettifor DG.
Thornton K. Agren J. Voorhees PW.
Li J. Ngan AHW. Gumbsch P.
Kumar KS. Van Swygenhoven H. Suresh S.
Williams JC. Starke EA.
Ashby MF. Brechet YJM.
Johnson SG. Joannopoulos JD.
Romig AD. Dugger MT. McWhorter PJ.
Flynn CE. Lee SW. Peelle BR. Belcher AM.
Van Vliet KJ. Bao G. Suresh S.
Jiles DC.
Bhattacharya K. Ravichandran G.
Davis RF. Einfeldt S. Preble EA. Roskowski
AM. Reitmeier ZJ. Miraglia PQ.
Haile SM.
Cahn RW.
Hibbard WR. Fullman RL. Gschneidner KA.
Acta Mechanica
115
139
161
175
189
199
217
Bifurcations of parametric oscillations of beams with three equilibria
A constitutive model for the viscoplastic behavior of rubbery polymers at nite
strains
Application of the dierential transformation method to the solutions of falknerskan wedge ow
Numerical and analytical study of rotating ow in an enclosed cylinder under an
axial magnetic eld
Post-buckling problems for long elastic beams
Oscillatory marangoni convection in a conducting uid layer with a deformable
free surface in the presence of a vertical magnetic eld
A viscoelastic constitutive model with nonlinear evolutionary internal variables
Acta Mechanica
1
Flow in the ekman layer on an oscillating porous plate
17
27
Elastostatic analysis of edge cracked orthotropic strips
On energetics and conservations for strings in the presence of singular sources of
momentum and energy
On saturation-strip model of a permeable crack in a piezoelectric ceramic
Dynamic eects on cavitation instabilities in solids
On stresses conjugate to eulerian strains
Thermomechanical postbuckling analysis of functionally graded plates and shallow cylindrical shells
47
73
87
99
3
164(3-4) 2003
Avramov KV.
Drozdov AD. Al-Mulla A. Gupta RK.
Kuo BL.
Bessaih R. Kadja M. Eckert K. Marty P.
Lazopoulos KA.
Hashim I. Arin NM.
Wei PJ. Chen JK.
165(1-2) 2003
Gupta AS. Misra JC. Reza M. Soundalgekar
VM.
Matbuly MS. Nassar M.
O'Reilly OM. Varadi PC.
Li S.
Kennedy TC. Puttapitukporn T. Kassner ME.
Nicholson DW.
Woo J. Meguid SA. Liew KM.
4
AIAA Journal
1853
1934
Computational aeroacoustics time-domain method coupled with adaptive noise
control optimizer
Statistical model of multicomponent-fuel drop evaporation for many-drop ow
simulations
Analysis of subgrid-scale torque for large-eddy simulation of turbulence
Reynolds-stress model dual-time-stepping computation of unsteady threedimensional ows
Analysis of ow conditions in freejet experiments for studying airfoil self-noise
Electrokinetic microactuator arrays and system architecture for active sublayer
control of turbulent boundary layers
Eects of periodic blowing from spanwise slot on a turbulent boundary layer
Adaptivity, sensitivity, and uncertainty: toward standards of good practice in
computational uid dynamics
Verication and validation for laminar hypersonic owelds, part 1: verication
1944
Verication and validation for laminar hypersonic owelds, part 2: validation
1955
1967
1973
1980
1988
Experimental investigations of hypersonic ow over highly blunted cones with
aerospikes
Inuences of blade bowing on owelds of turbine stator cascades
Gravitational eects on near-eld ow structure of low-density gas jets
Inverse method for identication of acoustic sources at launch vehicle lifto
Laser energy deposition in quiescent air
1996
Bilevel integrated system synthesis for concurrent and distributed processing
2004
2013
Value-based multidisciplinary techniques for commercial aircraft system design
Numerical analysis of rst and second cycles of oxyhydrogen pulse detonation
engine
Strain-rate eects on unidirectional carbon-ber composites
Deterministic and reliability-based optimization of composite laminates for cryogenic environments
Analysis and experiment of gas leakage through composite laminates for propellant tanks
Corrosion-enhanced fatigue and multiple-site damage
Thermoelastic modeling and vibration of functionally graded thin-walled rotating
blades
Uncertainty quantication of structural response using evidence theory
Micromechanical analyses of instabilities in braided glass textile composites
Sensitivity to the smagorinsky constant in turbulent jet simulations
Hybrid simulation approach for cavity ows: blending, algorithm, and boundary
treatment issues (vol 41, pg 1463, 2003)
1858
1875
1882
1895
1906
1916
1925
2020
2029
2037
2045
2051
2062
2069
2077
2079
41(10) 2003
Shi Z. Mei Z.
Harstad KG. Le Clercq PC. Bellan J.
Marshall JS. Beninati AL.
Chassaing JC. Gerolymos GA. Vallet I.
Moreau S. Henner M. Roger M.
Diez FJ. Dalm WJA.
Kim K. Sung HJ.
Pelletier D. Turgeon E. Lacasse D.
Roy CJ. McWherter-Payne MA. Oberkampf
WL.
Roy CJ. Oberkampf WL. McWherter-Payne
MA.
Menezes V. Saravanan S. Jagadeesh G. Reddy
KPJ.
Tan CQ. Yamamoto A. Chen HS.
Yep TW. Agrawal AK. GriÆn D.
Alestra S. Terrasse I. Troclet B.
Yan H. Adelgren R. Boguszko A. Elliott G.
Knight D.
Sobieszczanski-Sobieski J. Altus TD. Phillips
M. Sandusky R.
Markish J. Willcox K.
Kawai S. Fujiwara T.
Salvi AG. Chung J. Waas AM. Caliskan A.
Qu XY. Haftka RT. Johnson TF.
Kumazawa H. Aoki T. Susuki I.
Wei RP. Harlow DG.
Oh SY. Librescu L. Song O.
Bae HR. Grandhi RV. Caneld RA.
Quek SC. Waas AM.
Uzun A. Blaisdell GA. Lyrintzis AS.
Baurle RA. Tam CJ. Edwards JR. Hassan HA.
AIAA Journal
2085
2095
2105
2114
2130
2143
2157
2162
2170
2179
2192
2200
2208
Thin airfoil in elds of nonuniform density, part 1: single density interface
Thin airfoil in elds of nonuniform density, part 2: low-density strip
Small-scale airfoil aerodynamic eÆciency improvement by surface temperature
and heat transfer
Reduction of the adjoint gradient formula for aerodynamic shape optimization
problems
Thermal regime of catalyst particles in reactor for production of carbon nanotubes
Large-eddy simulation of ow around low-pressure turbine blade with incoming
wakes
Comparison of experimental and numerical studies of ionizing ow over a cylinder
Eect of vibrational nonequilibrium on hypersonic double-cone experiments
Simultaneous laser-induced uorescence and mie scattering for droplet cluster
measurements
Implicit technique for three-dimensional turbulent magnetoaerodynamics
Laser-induced breakdown spectroscopy of hydrocarbon ame and rocket engine
simulator plume
Lamination parameters applied to reliability-based in-plane strength design of
composites
EÆcient high-order frequency interpolation of structural dynamic response
41(11) 2003
Marble FE.
Marble FE.
Kim J. Rusak Z. Koratkar N.
Jameson A. Kim S.
Povitsky A. Salas MD.
Michelassi V. Wissink JG. Frohlich J. Rodi W.
McIntyre TJ. Bishop AI. Rubinsztein-Dunlop
H. Gnoo PA.
Nompelis I. Candler GV. Holden MS.
Zimmer L. Domann R. Hardalupas Y. Ikeda
Y.
Gaitonde DV. Poggie J.
Rai VN. Singh JP. Winstead C. Yueh FY.
Cook RL.
Kogiso N. Nakagawa S. Murotsu Y.
Lecomte C. McDaniel JG. Barbone PE. Pierce
AD.
2216
2229
2239
2244
2251
2261
2274
2283
2291
2294
2297
2300
2302
Analysis of the eects of thin sealant layers in aircraft structural joints
Prediction of nonlinear behavior of composites via micromechanics using matrix
bulk properties
Failure prediction of composite lugs under axial loads
Exact solutions of cross-ply laminates with bonding imperfections
Eect of temperature on the process of hypervelocity gouging
Vibration analysis of composite wing structures by a matrix form comprehensive
model
Layup optimization considering free-edge strength and bounded uncertainty of
material properties
Design strategy with a class of structural reliability models of high dimension
Dynamic loading methodologies
Sound waveform eect on disturbance generation in turbulent jets at aeroacoustic
interaction
Optimal disturbances in boundary layers subject to streamwise pressure gradient
In situ calibration uncertainty of pressure-sensitive paint
Region of utter and buckling instability for a cracked beam
Dechwayukul C. Rubin CA. Hahn GT.
Jadhav VR. Sridharan S.
Kassapoglou C. Townsend WA.
Chen WQ. Cai JB. Ye GR.
Laird DJ. Palazotto AN.
Hwu C. Gai HS.
Cho M. Rhee SY.
Jensen HA.
Moshier MA. Hinrichsen RL. Czarnecki GJ.
Pimshtein VG.
Tumin A. Ashpis DE.
Liu TS. Sullivan JP.
Wang Q. Koh CG.
763
781
805
817
831
The eects of learning on the optimal production lot size for deteriorating and
partially backordered items with time varying demand and deterioration rates
A variational approach for three-dimensional model of extensible marine cables
with specied top tension
The box-jenkins analysis and neural networks: prediction and time series modelling
Slow growth of an isolated disk-shaped bubble of constant eccentricity in the
presence of a distributed gas source
Improvements of generalized nite dierence method and comparison with other
meshless method
27(10) 2003
Balkhi ZT.
Chucheepsakul S. Srinil N. Petchpeart P.
BuHamra S. Smaoui N. Gabr M.
Gardiner BS. Boudreau BP. Johnson BD.
Gavete L. Gavete ML. Benito JJ.
849
861
877
889
899
913
Filling simulation and gas penetration modeling for gas-assisted injection molding
Prediction of temperature distribution and phase transformation on the run-out
table in the process of hot strip rolling
Modeling of continuous time homogeneous markov system with xed size as elastic
solid: the two-dimensional case
A note on laminar axisymmetric and two-dimensional glycerol plumes
On the iind model of contention-collision elimination access mode in star lan
A qbd approach to evolutionary game theory
27(11) 2003
Zhou HM. Li DQ.
Serajzadeh S.
Tsaklidis G. Soldatos KP.
Pantokratoras A.
Lu ZY. Lu M. Zhao DF. Wang LH.
Tadj L. Touzene A.
929
943
955
963
983
997
1013
1035
Design optimization models for storage and retrieval systems using rail guided
vehicles
A mathematical model of deterministic wormhole routing in hypercube multicomputers using virtual channels
Turbulent, mixing of a scalar quantity in a 2-d mixing layer using matched asymptotic expansions
Optimal design of a hoist structure frame
An eoq model for deteriorating items under supplier credits linked to ordering
quantity
Dispersion of mass by two-dimensional homogeneous and incompressible cinlar
ows
Non-linear k-epsilon turbulence model results for ow over a building at full-scale
Modelling of relief of phase reection diraction grating
27(12) 2003
Malmborg CJ.
Sarbazi-Azad H.
De Chant LJ.
Uys PE. Jarmai K. Farkas J.
Chang CT. Ouyang LY. Teng JT.
Caglar M.
Wright NG. Easom GJ.
Margelevicius M. Grigaliunas V. Pranevicius
H. Margelevicius J.
Applied Mathematics & Mechanics
871
880
Stability analysis in spatial mode for channel ow of ber suspensions
Bifurcation and chaos of the circular plates on the nonlinear elastic foundation
5
24(8) 2003
Lin JZ. You ZJ.
Qiu P. Wang XZ. Yeh KY.
6
886
893
902
909
917
928
936
945
950
961
970
979
989
Aerodynamic design method of cascade proles based on load and blade thickness
distribution
On the asymptotic behaviour of solutions of certain fth-order ordinary dierential equations
Comparison of two methods in satellite formation ying
Absolute stabilization related to circle criterion: an lmi-based approach
Analysis on the cohesive stress at half innite crack tip
Flow properties of a dusty-gas point source in a supersonic free stream
Optimal selection for the weighted coeÆcients of the constrained variational problems
Generalization of steiner formula for the homothetic motions on the planar kinematics
Level set methods based on distance function
Paradox solution on elastic wedge dissimilar materials
Nonlinear random stability of viscoelastic cable with small curvature
Interaction of a screw dislocation in the interphase layer with the inclusion and
matrix
Chaos in transiently chaotic neural networks
Yao Z. Liu GL.
Tunc C.
Gao YF. Baoyin HX. Li JF.
Yang Y. Huang L.
Wang LM. Xu SL.
Wang BY. Osiptsov AN. Teverovshii MA.
Wei M. Liu GQ. Wang CG. Ge WZ.
Kuruoglu N. Duldul M. Tutar A.
Wang DJ. Tang Y. Yu HC. Tang ZS.
Yao WA. Zhang BR.
Li YH. Gao Q.
Jiang CP. Liu YW. Xu YL.
Ruan J. Zhao WR. Liu RS.
Applied Mathematics & Mechanics
997
1009
1017
1025
1041
1051
1063
1075
1081
1089
1100
1111
Analysis of elastic layers with dilative eigenstrains varying through the thickness
Cavity formation at the center of a sphere composed of two compressible hyperelastic materials
Maximal elements for g(b)-majorized mappings in product g-convex spaces and
applications (ii)
Surface eects of internal wave generated by a moving source in a two-layer uid
of nite depth
Controllability of a class of hybrid dynamic systems (i) - basic properties and
preliminary results
Controllability of a class of hybrid dynamic systems (ii) - single time-delay case
Controllability of a class of hybrid dynamic systems (iii) - multiple time-delay
case
Numerical simulation for formed projectile of depleted uranium alloy
Hybrid nite analytic solutions of shallow water circulation
Visco-elastic systems under both deterministic and bound random parametric
excitation
Dierence scheme and numerical simulation based on mixed nite element method
for natural convection problem
Post-buckling of a cantilever rod with variable cross-sections under combined load
24(9) 2003
He LH. Lim CW. Liu RH.
Ren JS. Cheng CJ. Zhu ZY.
Ding XP.
Gang W. Le JC. Dai SQ.
Xie GM. Long W. Ye QK.
Song SC. Ping G. Cai HN.
Huai WX. Sheng YP. Komatsu T.
Wei X. Rong HW. Tong F.
Lou ZD. Jiang Z. Xie ZH. Zhang GF.
Ying W. Li SR. Teng ZC.
Archive for Rational Mechanics & Analysis
89
119
147
159
Global existence of smooth solutions for partially dissipative hyperbolic systems
with a convex entropy
The riemann function, singular entropies, and the structure of oscillations in
systems of two conservation laws
Backward uniqueness for parabolic equations
The uniqueness of nondecaying solutions for the navier-stokes equations
169(2) 2003
Hanouzet B. Natalini R.
Tzavaras AE.
Escauriaza L. Seregin G. Sverak V.
Kato J.
177
Pointwise green function bounds for shock proles of systems with real viscosity
169(3) 2003
Mascia C. Zumbrun K.
265
305
Relaxation of hamilton-jacobi equations
Classical solutions to the boltzmann equation for molecules with an angular cuto
169(4) 2003
Ishii H. Loreti P.
Guo Y.
7
1
17
63
Classical solutions and the glassey-strauss theorem for the 3d vlasov-maxwell
system
Singular perturbations of nonlinear degenerate parabolic pdes: a general convergence result
Partial regularity of strong local minimizers in the multi-dimensional calculus of
variations
170(1) 2003
Bouchut F. Golse F. Pallard C.
Alvarez O. Bardi M.
Kristensen J. Taheri A.
91
137
Elliptic two-dimensional invariant tori for the planetary three-body problem
Structure of entropy solutions for multi-dimensional scalar conservation laws
170(2) 2003
Biasco L. Chierchia L. Valdinoci E.
De Lellis C. Otto F. Westdickenberg M.
185
211
247
On the euler equations in the critical triebel-lizorkin spaces
Determination of the closure of the set of elasticity functionals
Binary decompositions for planar n-body problems and symmetric periodic solutions
170(3) 2003
Chae D.
Camar-Eddine M. Seppecher P.
Chen KC.
147
160
171
184
199
225
241
252
261
270
282
An eÆcient coupled layerwise theory for static analysis of piezoelectric sandwich
beams
Wound stress of permeable papers with air-entrainment
A new description of the stress state at a point with applications
Intensity factors for subinterface cracks in dissimilar anisotropic piezoelectric media
A variational approach to a micro-structured theory of solid-uid mixtures
Dynamic interaction between a sub-interface crack and the interface in a bimaterial: time-domain bem analysis
Sensitivity analysis of an optimized bar-spring model with hill-top branching
Propagation of an anti-plane moving crack in a functionally graded piezoelectric
strip
On an elastic-plastic transition zone in cellular metals
Dynamics of mooring systems in ocean engineering
Eective bending stiness for plates with microcracks
73(3-4) 2003
Kapuria S. Dumir PC. Ahmed A.
Tanimoto K. Kohno K. Takahashi S. Sasaki M.
Yoshida F.
Gao YC.
Beom HG. Jeong KM. Kim YH.
Sciarra G. Hutter K. Maugin GA.
Lei Y. Wang YS. Gross D.
Ohsaki M.
Jin B. Soh AK. Zhong Z.
Ochsner A. Winter W. Kuhn G.
Kreuzer E. Wilke U.
Simkins DC. Li S.
311
323
337
348
367
377
399
409
421
434
448
Generalized stress intensity factors in the interaction within a rectangular array
of rectangular inclusions
Penny-shaped crack in a piezoelectric cylinder under electro-mechanical loads
Analysis of transient wave scattering from an inclusion with an unilateral
smoothly contact interface by bem
An anti-plane propagating crack in a functionally graded piezoelectric strip
bonded to a homogeneous piezoelectric strip
On the frequency bandwidth change of a servo system with a gear reducer due
to backlash and motor input voltage
A boundary element method for anisotropic coupled thermoelasticity
On the separation of a suspension in a tube centrifuge: critical comments on
theoretical models and experimental verications
Investigation of the equilibrium states and their stability for a simple model with
unilateral contact and coulomb friction
Discrete mechanics and the nite element method
Surface cracking of a piezoelectric strip bonded to an elastic substrate (mode i
crack problem)
A classication of higher-order strain-gradient models in damage mechanics
73(5-6) 2003
Noda NA. Takase Y. Hamashima T.
Yang YH. Lee KY.
Feng YD. Wang YS. Zhang ZM.
Kwon SM. Lee KY.
Baek JH. Kwak YK. Kim SH.
Kogl M. Gaul L.
Ungarish M.
Basseville S. Leger A. Pratt E.
Chen JB. Guo HY. Wu K.
Wang BL. Mai YW. Sun YG.
Askes H. Sluys LJ.
8
Communications on Pure & Applied Mathematics
1525
1549
1565
1608
1631
The scattering support
Upper bound on the coarsening rate for an epitaxial growth model
Purely nonlinear instability of standing waves with minimal energy
One-bit sigma-delta quantization with exponential accuracy
Gauged harmonic maps, born-infeld electromagnetism, and magnetic vortices
56(11) 2003
Kusiak S. Sylvester J.
Kohn RV. Yan XD.
Comech A. Pelinovsky D.
Gunturk CS.
Lin FH. Yang YS.
Communications on Pure & Applied Mathematics
1
59
99
126
Pseudoholomorphic strips in symplectizations ii: fredholm theory and transversality
Thermal avalanche for blowup solutions of semilinear heat equations
Local minimizers with vortices to the ginzburg-landau system in three dimensions
A free boundary problem with optimal transportation
57(1) 2004
Abbas C.
Quiros F. Rossi JD. Vazquez JL.
Montero JA. Sternberg P. Ziemer WP.
Savin O.
Composites - Part A: Applied Science & Manufacturing
689
695
709
719
731
743
755
765
779
791
Eect of the length and the aggregate size of mwnts on the improvement eÆciency
of the mechanical and electrical properties of nanocomposites - experimental investigation
Inverse algorithm for optimal processing of composite materials
Production and properties of sicp-reinforced aluminium alloy composites
Transient hygrothermal stresses in ber reinforced composites: a heterogeneous
characterization approach
Short-term static and cyclic behavior of two automotive carbon-ber composites
Self-healing structural composite materials
Synthesis of composite foam from thermoplastic microspheres and 3d long bers
Impact-induced deformation elds in 3d cellular woven composites
In situ measurement and monitoring of whole-eld permeability prole of ber
preform for liquid composite molding processes
A neural network model-based open-loop optimization for the automated thermoplastic composite tow-placement system
803
Resin infusion between double exible tooling: prototype development
813
835
Adaptive mesh generation for mould lling problems in resin transfer moulding
Steady state and dynamic analysis of a bench-scale injected pultrusion process
847
855
863
Bonded composite solution to ship reinforcement
Inuence of fabric ties on the performance of woven-in optical bres
Mechanical performance of heat/re damaged novel ame retardant glassreinforced epoxy composites
Mechanical behaviour of smc composites with toughening and low density additives
A structural engineering approach to adhesive bonding longitudinal plates to rc
beams and slabs
Mechanical characterization of short ber reinforced phenolic foam
The inuence of non-linear elasticity on the determination of weibull parameters
using the bre bundle tensile test
875
887
899
907
915
927
933
The eect of silane coupling agents on radiata pine bre for use in thermoplastic
matrix composites
Experimental evaluation of unidirectional hollow glass bre/epoxy composites
under compressive loading
The interlaminar interface of a carbon ber polymer-matrix composite as a resistance heating element
34(8) 2003
Bai JB. Allaoui A.
Bailleul JL. Sobotka V. Delaunay D. Jamy Y.
Sahin Y. Acilar A.
Vaddadi P. Nakamura T. Singh RP.
Ruggles-Wrenn MB. Corum JM. Battiste RL.
Kessler MR. Sottos NR. White SR.
Vaikhanksi L. Nutt SR.
Bahei-El-Din YA. Zikry MA. Rajendran AM.
Ding L. Shih C. Liang ZY. Zhang C. Wang B.
Heider D. Piovoso MJ. Gillespie JW.
34(9) 2003
Thagard JR. Okoli OI. Liang Z. Wang HP.
Zhang C.
Bechet E. Ruiz E. Trochu F. Cuilliere JC.
Srinivasagupta D. Potaraju S. Kardos JL.
Joseph B.
Grabovac I.
Schuster J. Trahan M. Heider D. Li W.
Kandola BK. Horrocks AR. Myler P. Blair D.
Oldenbo M. Fernberg SP. Berglund LA.
Oehlers DJ. Park SM. Ali MSM.
Shen HB. Nutt S.
Moser B. Weber L. Rossoll A. Mortensen A.
34(10) 2003
Pickering KL. Abdalla A. Ji C. Mcdonald AG.
Franich RA.
Hucker M. Bond I. Bleay S. Haq S.
Fosbury A. Wang SK. Pin YF. Chung DDL.
941
949
963
971
979
987
995
Enhanced peel resistance of ber reinforced phenolic foams
Frequency analysis and characterization in orthogonal cutting of glass ber reinforced composites
Fibre damage in the manufacture of advanced three-dimensional woven composites
Eects of yarn constitutions and fabric specications on electrical properties of
hybrid woven fabrics
Hygrothermal aging of polyimide matrix composite laminates
Damage evolution in an o-axis unidirectional graphite bismaleimide composite
loaded in tension
Interface and impregnation relevant tests for continuous glass bre-polypropylene
composites
Rudov-Clark S. Mourtiz AP. Lee L. Bannister
MK.
Cheng KB. Cheng TW. Lee KC. Ueng TH.
Hsing WH.
Han MH. Nairn JA.
Cain KJ. Glinka G. Plumtree A.
Nygard P. Gustafson CG.
1135
1143
1151
1161
1167
1177
1187
1199
1207
1219
1227
1235
1245
1255
1265
Double cantilever beam testing of multidirectional laminates
Microstructure and chemical analysis of c/cu/al interfacial zones
Improved cure optimization in pultrusion with pre-heating and die-cooler temperature
An experimental study on the in situ strength of sic bre in unidirectional sic/al
composites
Characterisation of material properties for draping of dry woven composite material
Fracture behaviour of hybrid glass matrix composites: thermal ageing eects
Dielectric dispersion and ac conductivity in-iron particles loaded-polymer composites
Mechanical properties and toughening mechanisms of polypropylene/barium sulfate composites
Single wall nanotube and vapor grown carbon ber reinforced polymers processed
by extrusion freeform fabrication
Two-dimensional strain mapping in model ber-polymer composites using nanotube raman sensing
Eects of inter-bre spacing and matrix cracks on stress amplication factors in
carbon-bre/epoxy matrix composites. part i: planar array of bres
Eect of oxidation on the creep behaviour of copper-chromium in situ composite
Fiber-reinforced composite foam from expandable pvc microspheres
Numerical simulations of fracture-toughness improvement using short shaped
head ductile bers
Four-point bend interlaminar shear testing of uni- and multi-directional carbon/epoxy composite systems
34(11) 2003
de Morais AB.
Silvain JF. Proult A. Lahaye M. Douin J.
Joshi SC. Lam YC. Tun UW.
Huang W. Nie X. Xia YM.
Sharma SB. Sutclie MPF. Chang SH.
Dlouhy I. Chlup Z. Boccaccini DN. Atiq S.
Boccaccini AR.
Psarras GC. Manolakaki E. Tsangaris GM.
Wang K. Wu JS. Ye L. Zeng HM.
Shofner
ML.
Rodriguez-Macias
Vaidyanathan R. Barrera EV.
Zhao Q. Wagner HD.
10
16
29
40
52
60
71
89
104
115
134
Approximate numerical method for prediction of temperature distribution in ow
through narrow gaps containing porous media
Radial basis function method for 1-d and 2-d groundwater contaminant transport
modeling
A space-time analysis of blood ow in a 3d vessel with multiple aneurysms
Three-dimensional piezoelectric boundary element analysis of transversely
isotropic half-space
An interaction integral method for analysis of cracks in orthotropic functionally
graded materials
Modeling of interfacial debonding crack in particle reinforced composites using
voronoi cell nite element method
Comparison between the radial point interpolation and the kriging interpolation
used in meshfree methods
Computational modeling of growth - a critical review, a classication of concepts
and two new consistent approaches
Static and harmonic bem solutions of gradient elasticity problems with axisymmetry
A nite element post-processed galerkin method for dimensional reduction in the
non-linear dynamics of solids. applications to shells
Comparative study of nite element based response evaluation methods for laminated plates
Nitsche's method for coupling non-matching meshes in uid-structure vibration
problems
FJ.
Sirivedin S. Fenner DN. Nath RB. Galiotis C.
Lee KL.
Vaikhanski L. Nutt SR.
Tsai J. Patra AK. Wetherhold R.
Feraboli P. Kedward KT.
1
9
Shen HB. Lavoie AJ. Nutt SR.
Ramulu M. Kim D. Choi G.
32(1-2) 2003
Simacek P. Advani SG.
Li J. Chen Y. Pepper D.
Kumar BVR.
Liew KM. Liang J.
Rao BN. Rahman S.
Guo R. Shi HJ. Yao ZH.
Dai KY. Liu GR. Lim KM. Gu YT.
Kuhl E. Menzel A. Steinmann P.
Tsepoura KG. Polyzos D.
Sansour C. Wriggers P. Sansour J.
Park JW. Lee KC. Kim YH.
Hansbo P. Hermansson J.
10
143
154
169
177
185
199
214
A pmns algorithm for contact-impact of nurbs surface objects and dynamic simulation
An eÆcient integration procedure for linear dynamics based on a time discontinuous galerkin formulation
Local biem for transient heat conduction analysis in 3-d axisymmetric functionally
graded solids
Non-linear approximation method by an approach in stages
Development of a scalable nite element solution to the navier-stokes equations
Stochastic meshless analysis of elastic-plastic cracked structures
Glimm's method simulation for the pollutant transport in an isothermal atmosphere
32(3) 2003
Chen M. Chen LP. Song QZ. Zhong YF.
Mancuso M. Ubertini F.
Sladek J. Sladek V. Krivacek J. Zhang C.
Beda T. Chevalier Y.
Liu CH. Leung DYC. Woo CM.
Rao BN. Rahman S.
Martins-Costa ML. da Gama RMS.
Computer Methods in Applied Mechanics & Engineering
4281
4299
4313
4337
4355
4379
4403
4425
4439
4467
4487
4497
Boundary element methods for transient convective diusion. part i: general
formulation and 1d implementation
Boundary element methods for transient convective diusion. part ii: 2d implementation
Boundary element methods for transient convective diusion. part iii: numerical
examples
Warping shear stresses in nonuniform torsion of composite bars by bem
Parametrical mechanical design with constraints and preferences: application to
a purge valve
Implicit interpolation error-based error estimation for reaction-diusion equations
in two space dimensions
Meshless analysis of timoshenko beams based on a locking-free formulation and
variational approaches
Modeling of hydrodynamic dispersion and two-phase ow in the complex variable
boundary element method
A general method for simulation of uid ows with moving and compliant boundaries on unstructured grids
Symmetric nite volume discretizations for parabolic problems
Optimum design of exible structures under constraints on strain energy and
asymptotic stability
A geometrical approach to mesh smoothing
192(39-40) 2003
Grigoriev MM. Dargush GF.
Sapountzakis EJ. Mokos VG.
Coelho RF. Bersini H. Bouillard P.
Moore PK.
Xiao JR. McCarthy MA.
Sato K.
Zhao Y. Forhad A.
Ma XL. Shu S. Zhou AH.
Ohsaki M.
Aia M. Flaherty JE.
4517
4533
4551
4581
4609
4641
4659
4675
4687
4703
4723
A mixed nite element method and solution multiplicity for coulomb frictional
contact
A coupled nite element and meshless local petrov-galerkin method for twodimensional potential problems
A numerical study on neumann-neumann and feti methods for hp approximations
on geometrically rened boundary layer meshes in two dimensions
From continuous to discontinuous failure in a gradient-enhanced continuum damage model
A krylov subspace projection method for simultaneous solution of helmholtz problems at multiple frequencies
A parallel method for the numerical solution of integro-dierential equation with
positive memory
Comparison of dierent isotropic elastoplastic models at nite strains used in
numerical analysis
A superconvergence result for discontinuous galerkin methods applied to elliptic
problems
Multigrid methods for the computation of singular solutions and stress intensity
factors iii: interface singularities
Computation of free surface ows with a projection fem in a moving mesh framework
A multigrid solver for two-dimensional stochastic diusion equations
192(41-42) 2003
Hassani R. Hild P. Ionescu IR. Sakki ND.
Chen T. Raju IS.
Toselli A. Vasseur X.
Simone A. Wells GN. Sluys LJ.
Wagner MM. Pinsky PM. Oberai AA. Malhotra M.
Kwon KW. Sheen DW.
Idesman AV.
Castillo P.
Brenner SC. Sung LY.
Rabier S. Medale M.
Le Maitre OP. Knio OM. Debusschere BJ.
Najm HN. Ghanem RG.
11
4747
4769
4805
4837
Bi-expansion approximation of the bessel functions applied to analytical integration based bem for reissner plates
Truncation error and energy conservation for uid-structure interactions
Linear stability analysis in uid-structure interaction with transpiration. part i:
formulation and mathematical analysis
Linear stability analysis in uid-structure interaction with transpiration. part ii:
numerical analysis and applications
192(43) 2003
Leone A. Aristodemo M.
Mani S.
Fernandez MA. Le Tallec P.
Fernandez MA. Le Tallec P.
4877
4909
4929
4947
4965
4981
5001
5021
5037
First vorticity-velocity-pres sure numerical scheme for the stokes problem
A rigorous bound on error in backward-dierence elastoplastic time-integration
The compaction of aggregates of non-spherical linear viscous particles
Control-uid interaction in air-conditioned aircraft cabins. a demonstration of
stability analysis for partitioned dynamical systems
Two-level nite element discretization of viscoelastic uid ow
Generalized mixed variational principles and solutions of ill-conditioned problems
in computational mechanics. part ii: shear locking
Localization of structural zones producing hypersensitive behavior: nite element
approach
A new methodology for evolutionary optimization of energy systems
Development of a high-resolution hyperbolic model on quadratic elements
192(44-46) 2003
Dubois F. Salaun M. Salmon S.
Cocchetti G. Perego U.
Wu CW. Thompson EG. Heyliger PR.
Hofman JMA.
Liakos A. Lee H.
Rong TY. Lu AQ.
Ouisse A. Guyader JL.
McCorkle DS. Bryden KM. Carmichael CG.
Sheu TWH. Lee PH. Lin RK.
5059
5099
5123
5147
5167
Geometrically non-linear and consistently linearized embedded strong discontinuity models for 3d problems with an application to the dissection analysis of soft
biological tissues
Analysis of the interference eect of arbitrary multiple parabolic cracks in plane
elasticity by using a new boundary element method
Discontinuous/continuous galerkin methods for coupling the primitive and wave
continuity equations of shallow water
P-fem applied to nite isotropic hyperelastic bodies
Hierarchical basis for stabilized nite element methods for compressible ows
192(47-48) 2003
Gasser TC. Holzapfel GA.
Yan XQ.
Dawson C. Proft J.
Duster A. Hartmann S. Rank E.
Whiting CH. Jansen KE. Dey S.
Computer Modeling in Engineering & Sciences
507
519
535
551
559
571
587
603
Meshless local petrov-galerkin (mlpg) approaches for solving the weakly-singular
traction and displacement boundary integral equations
Free and forced vibrations of thick rectangular plates using higher-order shear and
normal deformable plate theory and meshless petrov-galerkin (mlpg) method
Some aspects of the method of fundamental solutions for certain biharmonic
problems
Molecular-dynamics analysis of grain-boundary grooving in interconnect lms
with underlayers
A geometric embedding algorithm for eÆciently generating semiexible chains in
the molten state
Application of meshless local petrov-galerkin (mlpg) to problems with singularities, and material discontinuities, in 3-d elasticity
A real-coded hybrid genetic algorithm to determine optimal resin injection locations in the resin transfer molding process
3-d transient dynamic crack analysis by a novel time-domain bem
4(5) 2003
Atluri SN. Han ZD. Shen S.
Qian LF. Batra RC. Chen LM.
Smyrlis YS. Karageorghis A.
Iwasaki T. Miura H.
Kroger M. Muller M. Nievergelt J.
Li Q. Shen S. Han ZD. Atluri SN.
Mathur R. Advani SG. Fink BK.
Zhang C. Savaidis A.
Computers & Fluids
1
19
31
Boundary conditions for shear ow past a permeable interface modeled as an
array of cylinders
The lens of freshwater in a tropical island - 2d withdrawal
Extension of eno and weno schemes to one-dimensional sediment transport equations
33(1) 2004
Pozrikidis C.
Hocking GC. Forbes LK.
Crnjaric-Zic N. Vukovic S. Sopta L.
12
57
81
97
119
137
Parallelization of a multi-blocked cfd code via three strategies for uid ow and
heat transfer analysis
Large eddy simulation of turbulent ow past a square cylinder conned in a
channel
Numerical study of taylor-couette ow with an axial ow
Computation of complex turbulent ow using matrix-free implicit dual timestepping scheme and lrn turbulence model on unstructured grids
Development of least-square-based two-dimensional nite-dierence schemes and
their application to simulate natural convection in a cavity
Jia RG. Sunden B.
Kim DH. Yang KS. Senda M.
Hwang JY. Yang KS.
Zhao Y.
Ding H. Shu C. Yeo KS. Xu D.
Computers & Fluids
155
179
201
223
257
267
289
315
Instability of channel ow with uid injection and parietal vortex shedding
Explicit algebraic reynolds stress model of incompressible turbulent ow in rotating square duct
EÆcient treatment of complex geometries for large eddy simulations of turbulent
ows
High order nite dierence methods for unsteady incompressible ows in multiconnected domains
Comparisons of direct simulations and analytical predictions for multi-plate ows
Zonal k-1 based large eddy simulations
Modelling of annular ow through pipes and t-junctions
On unconditional conservation of kinetic energy by nite-dierence discretizations
of the linear and non-linear convection equation
33(2) 2004
Kourta A.
Belhoucine L. Deville M. Elazehari AR. Bensalah MO.
Grigoriadis DGE. Bartzis JG. Goulas A.
Liu JG. Wang C.
Bhattacharyya S. Smith FT.
Tucker PG. Davidson L.
Adechy D. Issa RI.
Wissink JG.
2121
2137
2149
2165
2173
2183
2199
2219
2237
2249
2259
Symbolic computation in structural engineering [review]
Identication of masses moving on multi-span beams based on a genetic algorithm
Computer program for available ductility analysis of steel structures
Structural fault diagnosis and isolation using neural networks based on responseonly data
Dual approach using a variant perimeter constraint and eÆcient sub-iteration
scheme for topology optimization
Application of a three-dimensional mixed nite element model to the exure of
sandwich plate
Dynamic behavior of a tensegrity system subjected to follower wind loading
Stability of continuous welded rail track
Modeling of local buckling in tubular steel frames subjected to cyclic loading
Parametric optimization of complex systems using a multi-domain frf-based substructuring method
Applicability and viability of a ga based nite element analysis architecture for
structural design optimization
2273
2287
2301
2319
2331
2337
2353
2361
2373
2383
2395
Damage detection using generic elements: part i. model updating
Damage detection using generic elements: part ii. damage detection
Modelling of sma materials: training and two way memory eects
Use of eective stiness matrix for the free vibration analyses of a non-uniform
cantilever beam carrying multiple two degree-of-freedom spring-damper-mass systems
Neural classication of nite elements
Global optimization by coupled local minimizers and its application to fe model
updating
Neural simulation of dynamic response of prefabricated buildings subjected to
paraseismic excitations
Time integration errors and some new functionals for the dynamics of a free mass
Neural identication of rock parameters using fuzzy adaptive learning parameters
A method for analyzing three-dimensional dynamic contact problems in viscoelastic media with kinetic and static friction
An eÆcient technique for the computation of eigenvalue and eigenvector derivatives of cyclic structures
81(22-23) 2003
Pavlovic MN.
Jiang RJ. Au FTK. Cheung YK.
Petcu D. Gioncu V.
Chen Q. Chan YW. Worden K.
Zhang WH. Duysinx P.
Ramtekkar GS. Desai YM. Shah AH.
Lazzari M. Vitaliani RV. Majowiecki M. Saetta
AV.
Lim NH. Park NH. Kang YJ.
Febres R. Inglessis P. Florez-Lopez J.
Lee DH. Hwang WS.
Ali N. Behdinan K. Fawaz Z.
81(24-25) 2003
Titurus B. Friswell MI. Starek L.
Titurus B. Friswell MI. Starek L.
Auricchio F. Mara S. Sacco E.
Wu JJ.
Beltzer AI. Sato T.
Teughels A. De Roeck G. Suykens JAK.
Kuzniar K. Waszczyszyn Z.
Bardella L. Carini A. Genna F.
Liang YC. Feng DP. Liu GR. Yang XW. Han
X.
Liu S. Liu JB. Sun JG. Chen YJ.
Irwanto B. Hardtke HJ. Pawandenat D.
2401
2409
Comparison of c and java performance in nite element computations
Structural behaviour prediction for jack-up units during jacking operations
13
Nikishkov GP. Nikishkov YG. Savchenko VV.
Tan XM. Li J. Lu C.
2417
2431
2441
2455
2467
2479
2491
2501
2513
2525
2539
A new neural network for response estimation
Improved sensitivity analysis by a coupled fe-efg method
A new parallel overlapped domain decomposition method for nonlinear dynamic
nite element analysis
Analysis of steel bolted connections by means of a nonsmooth optimization procedure
Dynamic analysis of high speed railway bridge under articulated trains
Finite elements for 2d problems of pressurized membranes
Dispersive characteristic measurement of multi-layer cement mortar slabs using
sasw method and neural network
Single objective reliability-based optimization of prestressed concrete beams
Wind-induced load capacity analysis and parametric study of a long-span steel
arch bridge under construction
New layerwise theories and nite elements for eÆcient thermal analysis of hybrid
structures
A new unconstrained third-order plate theory for navier solutions of symmetrically laminated plates
81(26-27) 2003
Kallassy A.
Lacroix D. Bouillard P.
Rao ARM. Rao TVSRA. Dattaguru B.
Kontoleon MJ. Kaziolas DN. Zygomalas MD.
Baniotopoulos CC.
Xia H. Zhang N. De Roeck G.
Bouzidi R. Ravaut Y. Wielgosz C.
Cho YS.
Barakat S. Kallas N. Taha MQ.
Cheng J. Jiang JJ. Xiao RC. Xia M.
Noack J. Rolfes R. Tessmer J.
Leung AYT. Niu JC. Lim CW. Song KJ.
1797
1813
1833
1853
1867
1897
1917
1937
System identication on the seismic behavior of an isolated bridge
Inelastic earthquake response of single-story asymmetric buildings: an assessment
of simplied shear-beam models
Eects of column axial force - bending moment interaction on inelastic seismic
response of steel frames
Cumulative demand of the earthquake ground motions in the near source
Multi-variable relations for soil eects on seismic ground motion
Structural impedance based damage diagnosis by piezo-transducers
A response-spectrum-based envelope for mohr's circle
Assessment of seismic performance of extended pile-shafts
32(12) 2003
Lee ZK. Wu TH. Loh CH.
Stathopoulos KG. Anagnostopoulos SA.
Como M. De Stefano M. Ramasco R.
Manfredi G. Polese M. Cosenza E.
Bouckovalas GD. Papadimitriou AG.
Bhalla S. Soh CK.
Menun C.
Chai YH. Song ST.
1955
1977
1995
2013
2027
2047
2063
2085
2107
Input and system identication of the hualien soil-structure interaction system
using earthquake response data
Adaptive bang-bang control for the vibration control of structures under earthquakes
Cyclic tests on large-scale models of existing bridge piers with rectangular hollow
cross-section
An improved capacity spectrum method for atc-40
Seismic collapse analysis of reinforced concrete framed structures using the nite
element method
Quadratic jerk regulation and the seismic control of civil structures
Numerical study of the seismic behaviour of a part of the parthenon pronaos
Experimental verication of torsional response control of asymmetric buildings
using mr dampers
Seismic isolation of cable-stayed bridges for near-eld ground motions
32(13) 2003
Choi JS. Lee JS. Yun CB.
Lim CW. Chung TY. Moon SJ.
Pinto AV. Molina J. Tsionis G.
Lin YY. Chang KC.
Isobe D. Tsuda M.
Chase JG. Barroso LR. Hunt S.
Psycharis IN. Lemos JV. Papastamatiou DY.
Zambas C. Papantonopoulos C.
Yoshida O. Dyke SJ. Giacosa LM. Truman KZ.
Wesolowsky MJ. Wilson JC.
2127
2143
2161
2179
2197
Sub-optimal control of structures
Studies on seismic reduction of story-increased buildings with friction layer and
energy-dissipated devices
Predictive instantaneous optimal control of elastic structures during earthquakes
Predictive instantaneous optimal control of inelastic structures during earthquakes
Near-fault spatial variation in strong ground motion due to rupture directivity
and hanging wall eects from the chi-chi, taiwan earthquake
32(14) 2003
Cai GP. Sun F.
Li HN. Yin YW. Wang SY.
Wong KKF. Yang R.
Wong KKF. Yang R.
Shabestari KT. Yamazaki F.
14
2221
2241
2267
2289
Seismic fragility assessment of concrete gravity dams
Response spectral attenuation relationships for singapore and the malay peninsula
due to distant sumatran-fault earthquakes
Evaluation of predictors of non-linear seismic demands using 'shbone' models of
smrf buildings
The non-stationary cross-correlation coeÆcients in the seismic analysis of mdof
structural systems
Tekie PB. Ellingwood BR.
Megawati K. Pan TC. Koketsu K.
Luco N. Mori Y. Funahashi Y. Cornell CA.
Nakashima M.
Falsone G. Neri F.
1
17
39
57
81
107
127
Stress intensity formulas for three-dimensional cracks in homogeneous and bonded
dissimilar materials
The energy dissipation rate approach to tearing instability
Energy dissipation rate analysis of a low upper shelf data set
A probabilistic model for cleavage fracture with a length scale - parameter estimation and predictions of stationary crack experiments
A comparative study of numerical solutions to non-linear discrete crack modelling
of concrete beams involving sharp snap-back
Steady-state crack growth and fracture work based on the theory of mechanismbased strain gradient plasticity
Parametrizing ductile tearing resistance by four parameters
71(1) 2004
Noda NA.
Sumpter JDG.
Sumpter JDG.
Faleskog J. Kroon M. Oberg H.
Yang ZJ. Proverbs D.
Wei Y. Qiu X. Hwang KC.
Brocks W. Anuschewski P.
149
173
193
219
233
245
263
Finite element analysis of plasticity-induced fatigue crack closure: an overview
Elastic-plastic fracture mechanics assessment of test data for circumferential
cracked pipes
Numerical modeling of interactions between a macro-crack and a cluster of microdefects
Novel beam analysis of end notched exure specimen for mode-ii fracture
Validation of pure shear test device using nite element method and experimental
methods
Four-point bend adhesion measurements of copper and permalloy systems
A modied damage potential to predict crack initiation: theory and experimental
verication
71(2) 2004
Solanki K. Daniewicz SR. Newman JC.
Kim YJ. Shim DJ. Huh NS.
Soh AK. Yang CH.
Wang JL. Qiao PZ.
Hawong JS. Shin DC. Baek UC.
Hughey MP. Morris DJ. Cook RF. Bozeman
SP. Kelly BL. Chakravarty SLN. Harkens DP.
Stearns LC.
Dutta BK. Kushwaha HS.
279
289
309
329
345
365
379
401
Evaluation of dynamic fracture toughness k-id by hopkinson pressure bar loaded
instrumented charpy impact test
Crack kinking from an initially closed, ordinary or interface crack, in the presence
of friction
Numerical modelling of plasticity-induced crack closure for interfacial cracks in
bi-material specimens
J-m-p based criteria for bifurcation assessment of a crack in elastic-plastic materials under mixed mode i-ii loading
Mode i dcb testing of composite laminates reinforced with z-direction pins: a
simple model for the investigation of data reduction strategies
Stress intensity factors for internal circular cracks in bers under tensile loading
Modeling of void growth in ductile solids: eects of stress triaxiality and initial
porosity
Finite element implementation of virtual internal bond model for simulating crack
behavior
71(3) 2004
Jiang FC. Liu RT. Zhang XX. Vecchio KS. Rohatgi A.
Leblond JB. Frelat JL.
Wei LW. James MN.
Li J. Zhang XB. Recho N.
Robinson P. Das S.
Guinea GV. Rojo FJ. Elices M.
Kim J. Gao XS. Srivatsan TS.
Thiagarajan G. Hsia KJ. Huang Y.
Engineering Structures
1719
1731
1743
Finite element formulations and theoretical study for variable curvature friction
pendulum system
Statistical analysis of online strain response and its application in fatigue assessment of a long-span steel bridge
Cyclic seismic testing of steel moment connections reinforced with welded straight
haunch
25(14) 2003
Tsai CS. Chiang TC. Chen BJ.
Li ZX. Chan THT. Zheng R.
Lee CH. Jung JH. Oh MH. Koo ES.
1755
1763
1773
1785
1803
1815
1827
1841
Reduction of earthquake response of plane frame buildings by viscoelastic
dampers
A new technique for identication of eighteen utter derivatives using a threedegree-of-freedom section model
Verication of a 3-dimensional model for lling pressures in square thin-walled
silos
Quantication and localisation of damage in beam-like structures by using articial neural networks with experimental validation
Performance-based seismic design of structures: a direct displacement-based approach
Prediction of brittle fracture initiating at ends of cjp groove welded joints with
defects: study into applicability of failure assessment diagram approach
Dynamic and seismic performance of old multi-tiered temples in nepal
Eect of vertical component of earthquake on the response of pure-friction baseisolated asymmetric buildings
Chowdhury AG. Sarkar PP.
Goodey RJ. Brown CJ. Rotter JM.
Sahin M. Shenoi RA.
Xue Q. Chen CC.
Iwashita T. Kurobane Y. Azuma K. Makino
Y.
Jaishi B. Ren WX. Zong ZH. Maskey PN.
Shakib H. Fuladgar A.
European Journal of Mechanics A-Solids
649
651
669
693
709
727
743
751
General and plenary lectures from the 5th euromech solid mechanics conference
- thessaloniki, greece august 17-22, 2003 - preface
Unied thermodynamic framework-for nonlocal/gradient continuum theories
Congurational forces and their application in solid mechanics
Several phenomena in structural impact and structural crashworthiness
Mechanical twins, their development and growth
Mechanics and physics of disclinations in solids
Eective toughness of heterogeneous brittle materials
Intraphase strain heterogeneity in nonlinear composites: a computational approach
22(5) 2003
Tvergaard V.
Polizzotto C.
Gross D. Kolling S. Mueller R. Schmidt I.
Jones N.
Fischer FD. Schaden T. Appel F. Clemens H.
Romanov AE.
Roux S. Vandembroucq D. Hild F.
Moulinec H. Suquet P.
European Journal of Mechanics B-Fluids
411
431
445
473
487
511
Modal growth and non-modal growth in a stretched shear layer
Interactions between pairs of oblique waves on a mixing layer
3d numerical simulation of regular structure formation in a locally heated falling
lm
Forced convection past a heated cylinder in a porous medium using a thermal
nonequilibrium model: boundary layer analysis
A kinetic description of anisotropic uids with multivalued internal energy
On the stability of a rigid body in a magnetostatic equilibrium
22(5) 2003
Le Dizes S.
Mallier R.
Frank AM.
Rees DAS. Bassom AP. Pop I.
Degond P. Lemou M. Lopez JL.
Vladimirov VA. Moatt HK. Davidson PA. Ilin
KI.
117
130
139
152
159
167
178
188
193
199
207
Analysis of hysteresis and phase shifting phenomena in unsteady threedimensional wakes
X-ray measurements within unsteady cavitation
Investigation of the secondary corner vortex in a benchmark turbulent backwardfacing step using cross-correlation particle imaging velocimetry
Ultrasound thermometry in transparent and opaque uids
Measurement of 3d pore-scale ow in index-matched porous media
Spatially averaged time-resolved particle-tracking velocimetry in microspace considering brownian motion of submicron uorescent particles
Microbubble lensing-induced photobleaching (mu-blip) with application to microow visualization
Extended proper orthogonal decomposition: a tool to analyse correlated events
in turbulent ows
The ow eld near the edge of a model porous medium
Combined inuence of the reynolds number and localised wall suction on a turbulent boundary layer
Order and disorder in particle-liquid ows in a pipe
15
Tezcan SS. Uluca O.
35(2) 2003
Gillieron P. Chometon F. Laurent J.
Stutz B. Legoupil S.
Hall SD. Behnia M. Fletcher CAJ. Morrison
GL.
Fife S. Andereck CD. Rahal S.
Stohr M. Roth K. Jahne B.
Sato Y. Inaba S. Hishida K. Maeda M.
Sinton D. Erickson D. Li D.
Boree J.
Shams M. Currie IG. James DF.
Oyewola O. Djenidi L. Antonia RA.
Luo R. Yang HJ.
16
219
Measuring turbulence energy with piv in a backward-facing step ow
237
240
Analysis of phase-jitter evolution in a reattaching shear layer
Characteristics of a hot-wire microsensor for time-dependent wall shear stress
measurements
Optimal subpixel interpolation in particle image velocimetry
A spline-based technique for estimating ow velocities using two-camera multiline mtv
Assessment of piv to measure mean velocity and turbulence in open-channel ow
Theory of non-isotropic spatial resolution in piv
Jet column modes in both a plane jet and a passively modied plane jet subject
to acoustic excitation
Image correlation velocimetry applied to discrete smoke-wire streaklines in turbulent pipe ow
252
257
262
268
278
288
35(3) 2003
Piirto M. Saarenrinne P. Eloranta H. Karvinen
R.
Acharya S. Panigrahi PK.
Lofdahl L. Chernoray V. Haasl S. Stemme G.
Sen M.
Roesgen T.
Sadr R. Klewicki JC.
Hyun BS. Balachandar R. Yu K. Patel VC.
Scarano F.
Olsen JF. Rajagopalan S. Antonia RA.
Apps CP. Chen T. Sigurdson L.
291
303
310
317
325
338
347
357
364
372
Experimental determination of the free-stream disturbance eld in a shortduration supersonic wind tunnel
New technique for high-speed microjet breakup analysis
Criteria for quantitative plif experiments using high-power lasers
Dynamics of swirling jet ows
The response of a turbulent boundary layer to dierent shaped transverse grooves
Roughness eects in low-re-theta open-channel turbulent boundary layers
A technical study on the spraytec performances: inuence of multiple light scattering and multi-modal drop-size distribution measurements
Error estimation of laser-doppler anemometry measurements in uids with spatial
inhomogeneities of the refractive index
The eects of nozzle geometry on waterjet breakup at high reynolds numbers
Comparison of three roughness function determination methods
35(4) 2003
Weiss J. Knauss H. Wagner S.
Vago N. Spiegel A. Couty P. Wagner FR.
Richerzhagen B.
Melton LA. Lipp CW.
Ivanic T. Foucault E. Pecheux J.
Sutardi. Ching CY.
Tachie MF. Bergstrom DJ. Balachandar R.
Triballier K. Dumouchel C. Cousin J.
Resagk C. du Puits R. Thess A.
Tafreshi HV. Pourdeyhimi B.
Schultz MP. Myers A.
Fatigue & Fracture of Engineering Materials & Structures
489
491
507
515
523
533
543
551
561
Biaxial/multiaxial fatigue and fracture: selected papers from the sixth international conference
Biaxial testing and analysis of bicycle-welded components for the denition of a
safety standard
Critical plane approach for the assessment of the fatigue behaviour of welded
aluminium under multiaxial loading
A multiaxial fatigue criterion for random loading
Threshold and growth mechanism of fatigue cracks under mode ii and iii loadings
A nite element analysis of cracked square plates and bars under antiplane loading
Mixed-mode delamination growth of laminar composites by using threedimensional nite element modeling
Application of multiaxial fatigue criteria to materials containing defects
A unied approach for high and low cycle fatigue based on shakedown concepts
569
A fatigue damage map for 2024-t3 aluminium alloy
577
589
603
615
627
The eect of plasticity on incipient mixed-mode fatigue crack growth
Inclined standing contact fatigue
A threshold fatigue crack closure model: part i - model development
A threshold fatigue crack closure model: part ii - experimental verication
Finite element simulation of the mechanics of at contact pad fretting fatigue
tests
10(10)-cycle fatigue properties of 1800 mpa-class jis-sup7 spring steel
The eect of t-stress on plane strain dynamic crack growth in elastic-plastic materials
641
647
26(6) 2003
Pook LP. Van KD. Sonsino CM.
Petrone N. Susmel L.
Kueppers M. Sonsino CM.
Carpinteri A. Spagnoli A. Vantadori S.
Murakami Y. Takahashi K. Kusumoto R.
Pook LP.
Silva A. de Freitas MJM.
Beretta S.
Constantinescu A. Van KD. Maitournam MH.
26(7) 2003
Rodopoulos CA. de los Rios ER. Levers A.
Yates JR.
Dahlin P. Olsson M.
Alfredsson B. Olsson M.
Newman JA. Riddell WT. Piascik RS.
Newman JA. Riddell WT. Piascik RS.
Hammouda MMI. El-Batanony IG. Sallam
HEM.
Furuya Y. Abe T. Matsuoka S.
Jayadevan KR. Narasimhan R. Ramamurthy
TS. Dattaguru B.
17
663
675
683
695
711
715
719
731
741
Three-dimensional eects on fatigue crack closure in the small-scale yielding
regime - a nite element study
The eect of material hardness and mean stress on the fatigue limit of steels
containing small defects
Numerical investigation on j-integral testing of heterogeneous fracture toughness
testing specimens: part i - weld metal cracks
Fatigue of cantilevered pipe ttings subjected to vibration
Editorial on professor v.v. bolotin
Bending stiness calculation for nanosize structures
Direct evaluation of accurate coeÆcients of the linear elastic crack tip asymptotic
eld
Integrity of pressurized components with localized corrosion under internal pressure and transient thermal loading
Enhancement of fracture toughness due to energy screening eectin the early
stages of non-elastic failure
26(8) 2003
Roychowdhury S. Dodds RH.
Kondo Y. Sakae C. Kubota M. Kudou T.
Kim YJ. Kim JS. Schwalbe KH.
Hamblin M.
Goldstein R. Morozov N.
Ivanova EA. Krivtsov AM. Morozov NF.
Xiao QZ. Karihaloo BL.
Goldstein RV. Zhitnikov YV. Kadochnikov IV.
Wnuk MP.
757
767
779
791
811
821
835
847
Fatigue limit estimated using nite lives
Fretting fatigue behaviour of shot-peened ti-6al-4v at room and elevated temperatures
Fatigue crack nucleation and growth in lled natural rubber
A fracture mechanics analysis on the fatigue behaviour of cruciform joints of
duplex stainless steel
Axial fatigue of a gas-nitrided quenched and tempered aisi 4140 steel: eect of
nitriding depth
Two methods for predicting the multiaxial fatigue limits of sharp notches
Multiple mechanisms controlling fatigue crack growth
Structural integrity assessment of fbr components using a distributed computing
environment
861
863
865
887
901
909
921
931
939
949
957
969
985
999
1007
1019
Untitled
Introduction to the structure and contents of the special issue
Rail defects: an overview
Simulation of wheel-rail contact forces
The wheel-rail interface - some recent accidents
The current status of theory and practice on rail integrity in japanese railways rolling contact fatigue and corrugations
The blending of theory and practice in modern rail grinding
Rail integrity management by means of ultrasonic testing
Rolling contact in railways: modelling, simulation and damage prediction
Ratcheting and fatigue-led wear in rail-wheel contact
Image analysis to reveal crack development using a computer simulation of wear
and rolling contact fatigue
On propagation of short rolling contact fatigue cracks
Shakedown limit of rail surfaces including material hardening and thermal stresses
On the temperature in the wheel-rail rolling contact
Prevention of rcf damage in curved track through development of the infra-star
two-material rail
Development of bainitic rail steels with potential resistance to rolling contact
fatigue
1033
1041
Cumulative strain theory for simulation and development of wire drawing
Factors inuencing the service-like thermomechanical fatigue test cycle endurance
of 1 percent crmov rotor steel
26(9) 2003
Loren S.
Lee H. Jin O. Mall S.
Mars WV. Fatemi A.
Infante V. Branco CM. Martins R.
Limodin N. Verreman Y. Tarfa TN.
Susmel L. Taylor D.
Sadananda K. Vasudevan AK.
Rajagopal A. Ravichandran M. Muralidher
NG. Sivakumar SM.
26(10) 2003
Lunden R.
Lunden R.
Cannon DF. Edel KO. Grassie SL. Sawley K.
Iwnicki S.
Smith RA.
Ishida M. Akama M. Kashiwaya K. Kapoor A.
Magel E. Roney M. Kalousek J. Sroba P.
Marais JJ. Mistry KC.
Van KD. Maitournam MH.
Franklin FJ. Chung T. Kapoor A.
Fletcher DI. Franklin FJ. Kapoor A.
Ringsberg JW. Bergkvist A.
Bohmer A. Ertz M. Knothe K.
Fischer FD. Daves W. Werner EA.
Hiensch EJM. Franklin FJ. Nielsen JCO.
Ringsberg JW. Weeda GJ. Kapoor A. Josefson BL.
Sawley K. Kristan J.
26(11) 2003
Bitkov VV. Zalazinsky AG.
Masserey B. Colombo F. Mazza E. Holdsworth
S.
18
1053
1069
1081
1091
1103
Methods for crack opening load and crack tip shielding determination: a review
Probabilistic evaluation of leak rates through multiple defects: the case of nuclear
steam generators
Controlled failure design of drillstring threaded connections
Eect of magnetostriction on fracture of a soft ferromagnetic medium with a
crack-like aw
Crack propagation in notched specimens of porous silicon carbide under cyclic
loading
Stoychev S. Kujawski D.
Cizelj L. Roussel G.
Knight MJ. Brennan FP. Dover WD.
Wan YP. Fang DN. Soh AK. Hwang KC.
Tanaka K. Akiniwa Y. Kita Y. Segawa M.
1113
1119
1127
1135
1145
1159
1171
Morphology of step-wise s-n curves depending on work-hardened layer and humidity in a high-strength steel
Microstructures and adiabatic shear bands formed by ballistic impact in steels
and tungsten alloy
An eective method of stress intensity factor calculation for cracks emanating
from a triangular or square hole under biaxial loads
Numerical modelling of micro-pitting of gear teeth anks
Eects of cte-induced residual stresses around hard alpha particles on fatigue
crack growth in ti-6al-4v
A 'crack-like' notch analogue for a safe-life fretting fatigue design methodology
A stress-based method to predict lifetime under multiaxial fatigue loadings
26(12) 2003
Nakajima M. Tokaji K. Itoga H. Ko HN.
Duan ZQ. Li SX. Huang DW.
Yan X.
Fajdiga G. Flasker J. Glodez S. Hellen TK.
Laz PJ. Chan KS. McClung RC. Leverant GR.
Ciavarella M.
Lazzarin P. Susmel L.
Finite Elements in Analysis & Design
1
25
An improved quadrilateral nite element for analysis of thin plates
Parametric study of a sprocket system during heat-treatment process
41
61
83
Vibration of a rectangular plate undergoing forces moving along a circular path
An evolutionary approach to elastic contact optimization of frame structures
Free vibration analysis of laminated composite shell structures using hybrid strain
based layerwise nite elements
An optimization algorithm using orthogonal arrays in discrete design space for
structures
121
40(1) 2003
Razaqpur AG. Nofal M. Vasilescu A.
Liu P. Wang YY. Li J. Lu C. Quek KP. Liu
GR.
Wu JJ.
Li W. Li Q. Steven GP. Xie YM.
Liu ML. To CWS.
Lee KH. Yi JW. Park JS. Park GJ.
Finite Elements in Analysis & Design
139
159
173
187
213
A nite element model of exit bus for drilling of metals
Conditions for the invertibility of the isoparametric mapping for hexahedral nite
elements
A design method for cold backward extrusion using fe analysis
An endochronic plasticity model for nite strain deformation of powder forming
processes
Estimation of the plastic volume fraction from a linear-elastic nite element analysis
40(2) 2003
Saunders LKL.
Knabner P. Korotov S. Summ G.
Hur KD. Choi Y. Yeo HT.
Khoei AR. Bakhshiani A. Mod M.
Ramsay ACA.
Flow, Turbulence & Combustion
205
207
229
249
271
295
331
Special issue: unsteady ow in turbomachinery - preface
Characteristic regimes of transitional separation bubbles in unsteady ow
Experimental investigation of turbulence inuence of wake passing on the boundary layer development of highly loaded turbine cascade blades
Development and application of a novel technique for direct heat ux measurements in turbomachinery ows
Wake-induced boundary layer transition in a low-speed axial compressor
Analysis of dns and les of ow in a low pressure turbine cascade with incoming
wakes and comparison with experiments
Numerical investigation of unsteady transitional ows in turbomachinery components based on a rans approach
69(3-4) 2002
Rodi W.
Talan M. Hourmouziadis J.
Hilgenfeld L. Stadtmuller P. Fottner L.
Suslov D. Dullenkopf K. Schulz A. Wittig S.
Mailach R. Vogeler K.
Michelassi V. Wissink J. Rodi W.
Nurnberger D. Greza H.
19
Flow, Turbulence & Combustion
1
Large eddy simulation of a propagating turbulent premixed ame
21
241
267
299
Turbulence lter and pod analysis for velocity elds in lifted ch4-air diusion
ames
Three-dimensional laser-doppler velocimeter measurements in swirling turbulent
pipe ow
An open channel ow experimental and theoretical study of resistance and turbulent characterization over exible vegetated linings
Numerical study of the eÆciency of acoustic streaming for enhancing heat transfer
between two parallel beams
On fokker-planck equations for turbulent reacting ows. part 1. probability
density function for reynolds-averaged navier-stokes equations
On fokker-planck equations for turbulent reacting ows. part 2. lter density
function for large eddy simulation
Exponential vs algebraic growth and transition prediction in boundary layer ow
Numerical investigation of a blu-body stabilised nonpremixed ame with dierential reynolds-stress models
Structure of tip leakage ow in a forward-swept axial-ow fan
Les and des investigations of turbulent ow over a sphere at re=10,000
Transition modeling using two dierent intermittency transport equations
325
An attempt to realize experimental isotropic turbulence at low reynolds number
43
69
89
115
153
183
211
70(1-4) 2003
Kirkpatrick MP. Armeld SW. Masri AR.
Ibrahim SS.
Kodal A. Watson KA. Roberts WL. Lyons
KM.
Rocklage-Marliani G. Schmidts M. Ram VIV.
Velasco D. Bateman A. Redondo JM. Demedina V.
Wan Q. Kuznetsov AV.
Heinz S.
Heinz S.
Levin O. Henningson DS.
Li GX. Naud B. Roekaerts D.
Lee GH. Baek JH. Myung HJ.
Constantinescu GS. Squires KD.
Pecnik R. Sanz W. Gehrer A. Woisetschlager
J.
Birouk M. Sarh B. Gokalp I.
441
471
491
507
523
537
A theoretical analysis of formation ight as a nonlinear self-organizing phenomenon
Regular approximation of singular self-adjoint dierential operators
On existence and stability in the theory of swelling porous elastic soils
Time-dependent boundary integral equations for multiply connected plates
Truncated painleve expansion and reduction of sine-poisson equation to a quadrature in collisionless cold plasma
Inhibition of ame propagation by an endothermic reaction
68(5) 2003
Sugimoto T.
El-Gebeily MA.
Quintanilla R.
Chudinovich I. Constanda C.
Ibrahim RS.
Simon PL. Kalliadasis S. Merkin JH. Scott SK.
563
587
595
621
637
665
On a class of functional equations of the wiener-hopf type and their applications
in n-part scattering problems
A parseval-type theorem applied to certain integral transforms on generalized
functions
Well-posedness of incompressible models of two- and three-phase ow
On the domain derivative for scattering by impenetrable obstacles in chiral media
Mathematical modelling of the oxidation of nickel titanium alloys
Dynamics of a two-layer uid sloshing problem
68(6) 2003
Idemen M. Alkumru A.
Adawi A. Alawneh A.
Louaked M. Hanich L. Thompson CP.
Potthast R. Stratis IG.
Chen CY. Byrne HM. King JR.
Mackey D. Cox EA.
International Journal for Numerical & Analytical Methods
in Geomechanics
989
1005
1027
1043
1057
1079
An integral equation solution for three-dimensional heat extraction from planar
fracture in hot dry rock
Finite element modelling of frictional instability between deformable rocks
Elastic half-space under an oblique line impulse
Scaling improves stability of preconditioned cg-like solvers for fe consolidation
equations
Spatial distribution of safety factors: cohesive vertical cut
Three-dimensional elasto-plastic model for unsaturated compacted soils with different initial densities
27(12) 2003
Ghassemi A. Tarasovs S. Cheng AHD.
Xing HL. Makinouchi A.
Ziv M.
Gambolati G. Pini G. Ferronato M.
Baker R. Leshchinsky D.
Sun DA. Matsuoka H. Cui HB. Xu YF.
20
International Journal for Numerical & Analytical Methods
in Geomechanics
1099
1123
1153
Fabric evolution of granular assembly under k-0 loading/unloading
Experience in calibrating the double-hardening constitutive model monot
Ground response curves for rock masses exhibiting strain-softening behaviour
1187
Modelling crack propagation in concrete structures with a two scale approach
Liou JC. Pan YW.
Hicks MA.
Alonso E. Alejano LR. Varas F. Fdez-Manin
G. Carranza-Torres C.
Haidar K. Dube JF. Pijaudier-Cabot G.
International Journal for Numerical Methods in Engineering
679
703
723
749
771
793
Time continuity in cohesive nite element modeling
A novel approach to the analysis of distributed shear banding in polymer blends
3d computer simulation of melt ow and heat transfer in the lost foam casting
process
Eective volume-fraction optimization for thermal stress reduction in fgms using
irregular h-renement
Topology optimization of trusses using genetic algorithm, force method and graph
theory
Shape optimization of bonded patch to cylindrical shell structures
839
869
893
913
933
955
Multiple fully stressed designs of steel frame structures with semi-rigid connections
A numerical model for induction heating processes coupling electromagnetism
and thermomechanics
A gaussian sinc-collocation approach for a whipping cantilever with a follower
shear force at its tip
The meshless nite element method
Identication of coating defects in cathodically protected underground pipelines
Improved conditioning of innite elements for exterior acoustics
On the pareto optimum sensitivity analysis in multicriteria optimization
Cho JR. Park HJ.
Kaveh A. Kalatjari V.
Tong LY. Sun XN.
1049
1061
1091
Three-dimensional bem for scattering of elastic waves. in general anisotropic
Solution strategies for the delamination analysis based on a combination of localcontrol arc-length and line searches
Numerical implementation of the symmetric galerkin boundary element method
in 2d elastodynamics
'ultimate' robustness in meshing an arbitrary polyhedron
Elastodynamic guided wave scattering in innite plates
Bay F. Labbe V. Favennec Y. Chenot JL.
Reid SR. Roy D.
Idelsohn SR. Onate E. Calvo N. Del Pin F.
Miltiadou P. Wrobel LC.
Dreyer D. von Estor O.
Zhang WH.
On discontinuous galerkin methods
1149
Singularity extraction technique for integral equation methods with higher order
basis functions on plane triangles and tetrahedra
Quasi-dual reciprocity boundary-element method for incompressible ow: application to the diusive-advective equation
Structural design optimization on thermally induced vibration
A posteriori error estimates and an adaptive scheme of least-squares meshfree
method
Near-crack contour behaviour and extraction of log-singular stress tenns of the
self-regular traction boundary integral equation
1167
1187
1213
1251
58(7) 2003
Niu YQ. Dravinski M.
Alfano G. Criseld MA.
Yuan WF. Zhao ZY. Lie ST. Yu GY.
George PL. Borouchaki H. Saltel E.
Galan JM. Abascal R.
1119
58(6) 2003
Liu M. Burns SA.
979
999
58(5) 2003
Papoulia KD. Sam CH. Vavasis SA.
Pijnenburg KGW. Van der Giessen E.
Mirbagheri SMH. Varahram N. Davami P.
821
27(13) 2003
58(8) 2003
Zienkiewicz OC. Taylor RL. Sherwin SJ. Peiro
J.
Jarvenpaa S. Taskinen M. Yla-Oijala P.
Loeer CF. Mansur WJ.
Chen BS. Gu YX. Zhang HW. Zhao GZ.
Park SH. Kwon KC. Youn SK.
Jorge AB. Cruse TA. Fisher TS.
21
1277
1297
1321
1347
1381
1397
Stability and accuracy of the iterative dierential quadrature method
C-type method of unied camg and fea. part 1: beam and arch mega-elements 3d linear and 2d non-linear
Finite cover method for linear and non-linear analyses of heterogeneous solids
Parallel computational strategies for structural optimization
Dispersion analysis of a non-conforming nite element method for the helmholtz
and elastodynamic equations
Time-decomposed parallel time-integrators: theory and feasibility studies for
uid, structure, and uid-structure applications
Tomasiello S.
Ray D.
Terada K. Asal M. Yamagishi M.
Papadrakakis M. Lagaros ND. Fragakis Y.
Zyserman FI. Gauzellino PM. Santos JE.
Farhat C. Chandesris M.
1435
1457
1499
1523
1545
1571
Non-reecting articial boundaries for transient scalar wave propagation in a
two-dimensional innite homogeneous layer
An accurate scheme for mixed-mode fracture analysis of functionally graded materials using the interaction integral and micromechanics models
Hybrid-stabilized solid-shell model of laminated composite piezoelectric structures under non-linear distribution of electric potential through thickness
Implicit integration and consistent tangent modulus of a time-dependent nonunied constitutive model
Multi-time-step and two-scale domain decomposition method for non-linear structural dynamics
Vector level sets for description of propagating cracks in nite elements
1637
1683
1713
Theory and numerics of geometrically non-linear open system mechanics
Parallel multipole implementation of the generalized helmholtz decomposition for
solving viscous ow problems
Analysis of 3d problems using a new enhanced strain hexahedral element
Algorithms for automated meshing and unit cell analysis of periodic composites
with hierarchical tri-quadratic tetrahedral elements
A novel unsymmetric 8-node plane element immune to mesh distortion under a
quadratic displacement eld
Kim JH. Paulino GH.
Yao LQ. Lu L.
Kobayashi M. Mukai M. Takahashi H. Ohno
N. Kawakami T. Ishikawa T.
Gravouil A. Combescure A.
Ventura G. Budyn E. Belytschko T.
301
319
Modelling solitons under the hydrostatic and boussinesq approximations
An implicit edge-based ale method for the incompressible navier-stokes equations
A block-implicit numerical procedure for simulation of buoyant swirling ows in
a model furnace
3d free-surface ow computation using a ranse/fourier-kochin coupling
Characteristic euler shock-tting formulation for multi-dimensional ows
Areias PMA. de Sa JMAC. Antonio CAC. Fernandes AA.
Kim HJ. Swan CC.
Rajendran S. Liew KM.
43(3) 2003
Daily C. Imberger J.
Smith RW. Wright JA.
de Lemos MJS.
Guillerm PE. Alessandrini B.
Basesme EA. Akmandor IS. Ucer AS.
345
369
407
431
Numerical computation of three-dimensional incompressible navier-stokes equations in primitive variable form by dq method
Direct computation of thermodynamic properties of chemically reacting air with
consideration to cfd
Computation of turbulent free-surface ows around modern ships
A deconvolution-based fourth-order nite volume method for incompressible ows
on non-uniform grids
58(11) 2003
Kuhl E. Steinmann P.
Brown MJ. Mammoli AA. Ingber MS.
231
253
281
58(10) 2003
Zhao CB. Liu TY.
1593
1617
58(9) 2003
43(4) 2003
Shu C. Wang L. Chew YT.
Iannelli J.
Li TQ.
Iannelli P. Denaro FM. De Stefano G.
22
463
465
483
507
517
537
555
577
Special issue: eccomas computational uid dynamics conference - part i - introduction
Numerical modelling of free-surface ows in ship hydrodynamics
Predictability and uncertainty in cfd
About theoretical and practical impact of mesh adaptation on approximation of
functions and pde solutions
A multigrid accelerated time-accurate inviscid compressible uid ow solution
algorithm employing mesh movement and local remeshing
Fast preconditioned multigrid solution of the euler and navier-stokes equations
for steady, compressible ows
Computation of moving boundaries and interfaces and stabilization parameters
The distinctive cfd challenges of computational rheology
43(5) 2003
Morgan K. Weatherill NP.
Bulgarelli UP. Lugni C. Landrini M.
Lucor D. Xiu D. Su CH. Karniadakis GE.
Dervieux A. Leservoisier D. George PL.
Coudiere Y.
Sorensen KA. Hassan O. Morgan K. Weatherill
NP.
Caughey DA. Jameson A.
Tezduyar TE.
Walters K. Webster MF.
597
637
Eects of blood models on ows through a stenosis
Applications of patient-specic cfd in medicine and life sciences
651
673
Numerical modelling of the pressure wave propagation in the arterial ow
Computational modelling of 1d blood ow with variable mechanical properties
and its application to the simulation of wave propagation in the human arterial
system
Auto-regulation and blood ow in the cerebral circulation
Unstructured navier-stokes grid generation at comers and ridges
Transient xed point-based unstructured mesh adaptation
701
717
729
747
769
785
Mesh deformation and modication for time dependent problems
Some challenges of realistic ow simulations by unstructured grid cfd
The rapid and robust generation of eÆcient hybrid grids for rans simulations over
complete aircraft
43(6-7) 2003
Neofytou P. Drikakis D.
Lohner R. Cebral J. Soto O. Yim P. Burgess
JE.
Pontrelli G. Rossoni E.
Sherwin SJ. Formaggia L. Peiro J. Franke V.
David T. Brown M. Ferrandez A.
Sharov D. Luo H. Baum JD. Lohner R.
Alauzet F. George PL. Mohammadi B. Frey P.
Borouchaki H.
Baker TJ.
Nakahashi K. Ito Y. Togashi F.
Shaw JA. Stokes S. Lucking MA.
823
839
865
881
895
903
915
937
953
Computer solutions of maxwell's equations in homogeneous media
A parallel implementation of the fast multipole method for maxwell's equations
Performance of a parallel implementation of the fmm for electromagnetics applications
A reynolds-uniform numerical method for the prandtl solution and its derivatives
for stagnation line ow
Computing realistic reynolds-uniform error bound's for discrete derivatives of ow
velocities in the boundary layer for prandtl's problem
A reynolds-uniform numerical method for prandtl's boundary layer problem for
ow past a wedge
Numerical techniques for ow problems with singularities
Parameter-uniform numerical methods for a laminar jet problem
Adaptive hp nite element computations of the scattering width output of
maxwell's equations
43(8) 2003
Pironneau O.
Have P.
Sylvand G.
Miller JJH. Musgrave AP. Shishkin GI.
Farrell PA. Hegarty AF. Miller JJH.
O'Riordan E. Shishkin GI.
Butler JS. Miller JJH. Shishkin GI.
Farrell PA. Hegarty AF. Miller JJH.
O'Riordan E. Shishkin GI.
Ansari AR. Hegarty AF. Shishkin GI.
Ledger PD. Peraire J. Morgan K. Hassan O.
Weatherill NP.
979
1003
1019
1045
1067
1081
Computation of an unsteady complex geometry ow using novel non-linear turbulence models
Hybrid les-rans modelling: a one-equation sgs model combined with a k-omega
model for predicting recirculating ows
Urans computations for an oscillatory non-isothermal triple-jet using the k-omega
and second moment closure turbulence models
Eulerian-lagrangian dns/les of particle-turbulence interactions in wall-bounded
ows
Modelling three-dimensional rotating ows in cylindrical-shaped vessels
Implicit kinetic schemes for the euler equations
43(9) 2003
Tucker PG. Liu Y. Chung YMM. Jouvray A.
Davidson L. Peng SH.
Nishimura A. Kimura N.
Portela LA. Oliemans RVA.
Sujatha KS. Webster AF.
Reksoprodjo HSR. Agarwal RK.
1099
1107
1139
A spatially adaptive linear space-time nite element solution procedure for incompressible ows with moving domains
Numerical solutions of incompressible navier-stokes equations using modied
bernoulli's law
A non-iterative method for boundary-layer equations - part ii: two-dimensional
laminar and turbulent ows
Shatalov A. Hafez M.
Cebeci T. Shao JP.
2335
2363
2381
2411
2429
2447
Non-linear viscoelasticity and viscoplasticity of isotactic polypropylene
On the uniqueness and continuous data dependence of solutions in the theory of
swelling porous thermoelastic soils
Modeling thermal fatigue cracking in integrated circuits by level sets and the
extended nite element method
Transmission of sound waves in a cylindrical duct with an acoustically lined mufer
A nitely long circular cylindrical shell of piezoelectric/piezomagnetic composite
under pressuring and temperature change
On stress analysis for cracks in elastic materials with voids
41(20) 2003
Drozdov AD. Gupta RK.
Chirita S.
Stolarska M. Chopp DL.
Demir A. Buyukaksoy A.
Wang X. Zhong Z.
Ciarletta M. Iovane G. Sumbatyan MA.
1
13
29
43
65
79
A line dislocation interacting with a semi-innite crack in piezoelectric solid
Finite element study of mixed convection micropolar ow in a vertical circular
pipe with variable surface conditions
Hyper-elastic constitutive equations of conjugate stresses and strain tensors for
the seth-hill strain measures
Internal constraint theories for the thermal expansion of viscous uids
Hydromagnetic couette ow of an oldroyd-b uid in a rotating system
Asymptotic behaviour of thin interphases within the large deformation case
42(1) 2004
Chen BJ. Xiao ZM. Liew KM.
Bhargava R. Agarwal RS. Kumar L. Takhar
HS.
Farahani K. Bahai H.
Bechtel SE. Rooney FJ. Forest MG.
Hayat T. Nadeem S. Asghar S.
Brillard A. Ganghoer JF.
99
123
137
157
187
203
217
Circular crested waves in anisotropic thermoelastic plates bordered with inviscid
liquid
On the explicit analytic solutions of an oldroyd 6-constant uid
Rayleigh-lamb waves in magneto-thermoelastic homogeneous isotropic plate
Boundary integral equation formulation for the generalized micro-polar thermoviscoelasticity
Dynamic stress intensity factors around two parallel cracks in a functionally
graded layer bonded to dissimilar half-planes subjected to anti-plane incident
harmonic stress waves
The eect of a bump on wave propagation in a uid-lled elastic tube
Unsteady mhd convective heat and mass transfer past a semi-innite vertical
permeable moving plate with heat absorption
501
517
537
545
Ultra high molecular weight polyethylene deformation and fracture behaviour as
a function of high strain rate and triaxial state of stress
On the determination of the cohesive zone parameters for the modeling of microductile crack growth in thick specimens
On the problems of crack interactions and crack coalescence
Simulation of dynamic crack curving and branching under biaxial loading by a
time domain boundary integral equation method
23
Feng YT. Peric D.
42(2) 2004
Sharma JN. Pathania V. Gupta SK.
Hayat T. Khan M. Ayub M.
Sharma JN. Pal M.
El-Karamany AS.
Ma L. Wu LZ. Zhou ZG.
Demiray H.
Chamkha AJ.
120(3) 2003
Mourad AHI. Elsayed HF. Barton DC. Kenawy M. Abdel-Latif LA.
Chen CR. Kolednik O. Scheider I. Siegmund
T. Tatschl A. Fischer FD.
Kachanov M.
Raee S. Seelig T. Gross D.
24
563
581
601
Energy partitioning for a crack under remote shear and compression
Computational modeling of crack propagation in real microstructures of steels
and virtual testing of articially designed materials
Mixed-mode thermoelastic fracture analysis of orthtropic composites
120(4) 2003
Steer ED. Epstein JS. Conley EG.
Mishnaevsky L. Lippmann N. Schmauder S.
Ju SH. Rowlands RE.
1
9
Near the static fatigue limit in glass
Scaling and dynamics of an interfacial crack front
23
Inuence of the specimen geometry on r-curve behavior and roughening of fracture
surfaces
Morphology of damage cavities in aluminium alloys
Crack front waves in dynamic fracture
Multiresolution atomistic simulations of dynamic fracture in nanostructured ceramics and glasses
43
55
71
121(1-2) 2003
Wiederhorn SM. Dretzke A. Rodel J.
Maloy KJ. Schmittbuhl J. Hansen A. Batrouni
GG.
Morel S. Mourot G. Schmittbuhl J.
Paun F. Bouchaud E.
Fineberg J. Sharon E. Cohen G.
Kalia RK. Nakano A. Vashishta P. Rountree
CL. Van Brutzel L. Ogata S.
International Journal of Heat & Mass Transfer
4755
4769
4779
4789
4799
4813
4823
4835
4845
4863
4877
4885
4899
4911
4925
4935
4949
4963
4969
4975
4979
Species heat and mass transfer in a human upper airway model
Heat ow rate at a bore-face and temperature in the multi-layer media surrounding a borehole
Convective boiling heat transfer and two-phase ow characteristics inside a small
horizontal helically coiled tubing once-through steam generator
A numerical simulation of pool boiling using cas model
Eect of magnetic eld on g-jitter induced convection and solute striation during
solidication in space
An explicit solution for the combined heat and mass transfer by natural convection
from a vertical wall in a non-darcy porous medium
Low reynolds number mixed convection in vertical tubes with uniform wall heat
ux
Drift-ux model for downward two-phase ow
Heat transfer of impinging air and liquid nitrogen mist jet onto superheated at
surface
Non-darcian thermal stability of a heat generating uid in a porous annulus
Characteristics and correlations of voc emissions from building materials
Fluid dynamical view of pressure checkerboarding problem and smoothing pressure correction on meshes with colocated variables
Theoretical and numerical analysis of convective heat transfer in the rotating
helical pipes
Ldv assisted bubble dynamic parameter measurements from two enhanced tubes
boiling in saturated r-134a
Study of free convective heat transfer from horizontal conic
One-dimensional drift-ux model and constitutive equations for relative motion
between phases in various two-phase ow regimes
Interfacial area transport of vertical upward bubbly two-phase ow in an annulus
Numerical simulation of laser-induced transient temperature eld in lmsubstrate system by nite element method
Suppression of marangoni convection of silicon melt by a non-contaminating
method
Limiting cross-ow velocity below which heat ux is determined by natural convection laws
Eect of viscous dissipation and pressure stress work in natural convection along
a vertical isothermal plate. new results
46(25) 2003
Zhang Z. Kleinstreuer C.
Chugunov V. Fomin S. Hashida T.
Zhao L. Guo LJ. Bai BF. Hou YC. Zhang XM.
Yang J. Guo LJ. Zhang XM.
Li K. Li BQ. de Groh HC.
Wang C. Liao SJ. Zhu JM.
Behzadmehr A. Galanis N. Laneville A.
Goda H. Hibiki T. Kim S. Ishii M. Uhle J.
Su LM. Chang SW. Yeh CI. Hsu YC.
Saravanan S. Kandaswamy P.
Zhang YP. Xu Y.
Date AW.
Chen HJ. Zhang BZ. Ma JF.
Hsieh SS. Lai WC. Tsai HH.
Lewandowski WM. Leble S.
Hibiki T. Ishii M.
Hibiki T. Mi Y. Situ R. Ishii M.
Xu BQ. Shen ZH. Lu J. Ni XW. Zhang SY.
Li H. Li MW. Hu WR. Zeng DL.
Raju HV. Narasimha R.
Pantokratoras A.
25
4985
4987
4989
5005
5017
5031
5045
5059
5065
5073
5087
5099
5113
5123
5137
5145
5153
5161
5175
Untitled
Professor d. brian spalding on his eightieth birthday
The role of porous media in modeling ow and heat transfer in biological tissues
[review]
Thermal-uid ow in parallel boards with heat generating blocks
Non-thermal equilibrium melting of granular packed bed in horizontal forced convection. part i: experiment
Non-thermal equilibrium melting of granular packed bed in horizontal forced convection. part ii: numerical simulation
The characteristics of turbulent ow and convection in concentric circular annuli.
part i: ow
Study on the interfacial evaporation of aqueous solution of sds surfactant selfassembly monolayer
Thermal instability of viscoelastic uids in porous media
The inuence of preferential diusion and stretch on the burning intensity of a
curved ame front with fuel spray
Quasi-homogeneous boiling nucleation on a small spherical heater in microgravity
Eects of pore size distribution and ber diameter on the coupled heat and liquid
moisture transfer in porous textiles
Turbulent ow in a channel occupied by a porous layer considering the stress
jump at the interface
Simulation of micro-scale interaction between ice and biological cells
Thermal wave propagation in a bi-layered composite sphere due to a sudden
temperature change on the outer surface
A new minimum volume straight cooling n taking into account the "length of
arc"
High-speed visualisation of nucleate boiling in vertical annular ow
Enhancing heat transfer ability of drag reducing surfactant solutions with static
mixers and honeycombs
Non-isothermal steady-state diusion within glaser's condensation model
46(26) 2003
Schouwenburg A.
Patankar SV. Hartnett JP. Minkowycz WJ.
Khaled ARA. Vafai K.
Furukawa TH. Yang WJ.
Hao YL. Tao YX.
Hao YL. Tao YX.
Kaneda M. Yu B. Ozoe H. Churchill SW.
Zhang JT. Wang BX.
Kim MC. Lee SB. Kim S. Chung BJ.
Hou SS. Lin JC.
Lee HS. Merte H. Picker G. Straub J.
Zhu QY. Li Y.
Silva RA. de Lemos MJS.
Mao L. Udaykumar HS. Karlsson JOM.
Tsai CS. Hung CI.
Hanin L. Campo A.
Barbosa JR. Hewitt GF. Richardson SM.
Qi YY. Kawaguchi Y. Christensen RN. Zakin
JL.
Ficker T.
1
11
21
31
35
43
63
75
87
101
111
125
135
149
165
179
185
A one-dimensional numerical study of the salt diusion in a salinity-gradient solar
pond
Experimental analysis of the use of wet porous media for thermal protection
against high intensity heat uxes
A fourier transform based data reduction method for the evaluation of the local
convective heat transfer coeÆcient
Heat transfer characteristics of a boundary-layer ow driven by a power-law shear
over a semi-innite at plate
The lda study of ow gas-dynamics in a vortex chamber
Eects of a rst-order chemical reaction on turbulent mass transfer
Estimation of the nucleation probability in emulsions
Explicit analytic solution for similarity boundary layer equations
Heat and mass transfer in a square microchannel with asymmetric heating
Solution of the radiative integral transfer equations in rectangular participating
and isotropically scattering inhomogeneous medium
Dendritic ns optimization for a coaxial two-stream heat exchanger
The eect of the macroscopic local inertial term on the non-newtonian uid ow
in channels lled with porous medium
Numerical and experimental analysis of chemical dehydration, heat and mass
transfers in a concrete hollow cylinder submitted to high temperatures
Numerical study of cavitating ow characteristics of liquid helium in a pipe
Evaporative cooling of water in a mechanical draft cooling tower
Eect of interphase matter transfer on condensation on low-nned tubes - a theoretical investigation
Eects of solid layer thickness and nominal composition on double-diusive instabilities during solidication of a binary alloy cooled from the top
47(1) 2004
Angeli C. Leonardi E.
Figueiredo AR. Costa JJ.
Cossali GE.
Magyari E. Keller B. Pop I.
Volchkov EP. Lebedev VP. Lukashov VV.
Mitrovic BM. Papavassiliou DV.
Gibout S. Strub M. Dumas JP.
Liao SJ. Pop I.
van Male P. de Croon MHJM. Tiggelaar RM.
van den Berg A. Schouten JC.
Altac Z. Tekkalmaz M.
Bonjour J. Rocha LAO. Bejan A. Meunier F.
Al-Nimr MA. Aldoss TK.
Dal Pont S. Ehrlacher A.
Ishimoto J. Kamijo K.
Fisenko SP. Brin AA. Petruchik AI.
Wang HS. Rose JW.
Chakraborty S. Dutta P.
26
191
203
215
229
245
257
271
287
307
329
341
353
363
373
385
395
407
413
Transverse eigenproblem of steady-state heat conduction for multi-dimensional
two-layered slabs with automatic computation of eigenvalues
Optimal distribution of discrete heat sources on a wall with natural convection
Joule heating eect on electroosmotic ow and mass species transport in a microcapillary
Heat transfer in rectangular channels with transverse and v-shaped broken ribs
Inuence of shaped injection holes on turbine blade leading edge lm cooling
Three-dimensional numerical simulation of convection and radiation in a dierentially heated cavity using the discrete ordinates method
Numerical study on supersonic combustion with cavity-based fuel injection
Heat transfer in a swinging rectangular duct with two opposite walls roughened
by 45 degrees staggered ribs
Volumetric interfacial area prediction in upward bubbly two-phase ow
Continuously distributed sensors for steady-state temperature prole measurements: main principles and numerical algorithm
Numerical investigation of heat transfer characteristics of the heated blocks in
the channel with a transversely oscillating cylinder
Experimental shell-side heat transfer and pressure drop in gas ow for spiralwound lng heat exchanger
3d unsteady numerical analysis of conjugate heat transport and turbulent/laminar ows in lec growth of gaas crystals
Direct identication of absorption and scattering coeÆcients and phase function
of a porous medium by a monte carlo technique
Prediction of friction factors and heat transfer coeÆcients for turbulent ow in
corrugated tubes combined with twisted tape inserts. part 2: heat transfer coefcients
Simplied models for coupled heat and mass transfer in falling-lm absorbers
Pool boiling heat transfer experiments in silica-water nano-uids
On void fraction distribution during two-phase boiling ow instability
47(2) 2004
de Monte F.
da Silva AK. Lorente S. Bejan A.
Tang GY. Yang C. Chai JC. Gong HQ.
Tanda G.
Kim YJ. Kim SM.
Colomer G. Costa M. Consul R. Oliva A.
Kim KM. Baek SW. Han CY.
Chang SW. Su LM. Yang TL.
Yao W. Morel C.
Evdokimov YK. Martemianov S.
Fu WS. Tong BH.
Neeraas BO. Fredheim AO. Aunan B.
Smirnova OV. Kalaev VV.
Tancrez M. Taine J.
Zimparov V.
Islam MR. Wijeysundera NE. Ho JC.
Vassallo P. Kumar R. D'Amico S.
Yeoh GH. Tu JY. Li Y.
International Journal of Mechanical Sciences
777
797
813
831
851
873
891
915
941
Application of 3-d nite element method using lagrangian formulation to dilution
control in laser cladding process
Non-quadratic yield criterion for orthotropic sheet metals under plane-stress conditions
Dynamic analysis of non-uniform beams and plates by nite elements with generalized degrees of freedom
More general expression for the torsional warping of a thin-walled open-section
beam
The plastic collapse and energy absorption capacity of egg-box panels
Transverse vibrations of elliptical plate of linearly varying thickness with half of
the boundary clamped and the rest simply supported
Eective mechanical behavior of hyperelastic honeycombs and two-dimensional
model foams at nite strain
Dynamic plastic behavior of a free-free beam striking the mid-span of a clamped
beam with shear and membrane eects considered
Analysis of the free vibration of rectangular plates with central cut-outs using
the discrete ritz method
45(5) 2003
Zhao GP. Cho CD. Kim JD.
Banabic D. Kuwabara T. Balan T. Comsa DS.
Julean D.
Li QS. Yang LF. Zhao YL. Li GQ.
Lin WY. Hsiao KM.
Zupan M. Chen C. Fleck NA.
Hassan SM. Makary M.
Hohe J. Becker W.
Yang JL. Liu XH. Reid SR.
Liew KM. Kitipornchai S. Leung AYT. Lim
CW.
1
13
25
33
55
63
79
93
101
Global existence and uniqueness of solutions for the equations of third grade uids
Analytical and numerical solutions of a coupled non-linear system arising in a
three-dimensional rotating ow
On the application of adaptive control and phase synchronization in non-linear
uid dynamics
Dynamical analysis of two coupled parametrically excited van der pol oscillators
Comparison arguments and decay estimates in non-linear viscoelasticity
Systematic closed form modeling of hybrid parameter multiple body systems
Parametric stability of non-linear time delay equations
Rain-wind-induced vibrations of a simple oscillator
Shock calculations for axially symmetric shear wave propagation in a hyperelastic
incompressible solid
39(1) 2004
Busuioc V. Iftimie D.
Vajravelu K. Kumar BVR.
Banerjee S. Saha P. Chowdhury AR.
Bi QS.
Quintanilla R.
Barhorst AA.
Fofana MS. Ryba PB.
van der Burgh AHP. Hartono.
Barclay DW.
123
137
153
165
On the eÆcacy of pseudo-coordinates - part 1: moving interior constraints
On the eÆcacy of pseudo-coordinates - part 2: moving boundary constraints
Analysis of cooling of a conducting uid lm of non-uniform thickness on a rotating disk
An analytical study of linear and non-linear convection in boussinesq-stokes suspensions
Siddheshwar PG. Pranesh S.
175
189
201
219
225
233
247
265
271
281
299
311
331
341
Materially and geometrically non-linear woven composite micro-mechanical model
with failure for nite element simulations
Non-linear normal modes and their bifurcation of a class of systems with three
double of pure imaginary roots and dual internal resonances
Diusion of a uid through an elastic solid undergoing large deformation
A representation theorem for volume-preserving transformations
Analytical solutions for non-newtonian uid ows in pipe-like domains
A new multigrid algorithm for non-linear equations in conjunction with timemarching procedures
Phase equilibrium in non-uids and non-uid mixtures
An investigation into the spreading of a thin liquid drop under gravity on a slowly
rotating disk
An analytic approximate approach for free oscillations of self-excited systems
Staggering error control of a class of inelastic processes in random microheterogeneous solids
Dynamics of pseudo-rigid ball impact on rigid foundation
Parametric excitation in non-linear dynamics
Elastic rods, weierstrass' theory and special travelling waves solutions with compact support
Monte carlo simulation in the stochastic analysis of non-linear systems under
external stationary poisson white noise input (vol 38, pg 1269, 2003)
39(2) 2004
Tabiei A. Ivanov I.
Li XY. Chen YS. Wu ZQ.
Baek S. Srinivasa AR.
Carroll MM.
Fetecau C.
Durga KK. Ramakrishna M.
Samohyl I. Pabst W.
Momoniat E. Abelman S.
Liao SJ.
Zohdi TI.
Kanso E. Papadopoulos P.
Bakri T. Nabergoj R. Tondl A. Verhulst F.
Saccomandi G.
Muscolino G. Ricciardi G. Cacciola P.
343
369
379
389
399
421
427
441
447
457
467
483
491
503
Non-linear viscoelastodynamic equations of three-dimensional rotating structures
in nite displacement and nite element discretization
Continuum modeling of cell membranes
A new constitutive equation that models extensional ow strain hardening based
on evolving natural congurations: stability analysis
Symmetry classication and optimal systems of a non-linear wave equation
Dynamics of biological soft tissue and rubber: internally pressurized spherical
membranes surrounded by a uid
Conjugate resonances and bifurcations in nonlinear systems under biharmonical
excitation
Transient mixed convection ow of a second grade viscoelastic uid past an inclined backward facing step
Diusion of a line vortex in a second-order uid
Propogation of waves in a linear elastic uid
Substructural interactions and transport in polymer ows
A cantilever conveying uid: coherent modes versus beam modes
Torsional instability of stretched rubber cylinders
Perturbation solution for secondary bifurcation in the quadratically-damped
mathieu equation
The dynamics of loosely jointed structures
39(3) 2004
Desceliers C. Soize C.
Baesu E. Rudd RE. Belak J. McElfresh M.
Palade LI. Walton JR. Farina A.
Gandarias ML. Torrisi A. Valenti A.
Haslach HW. Humphrey JD.
Blekhman II. Landa PS.
Kung KY. Hsu XCH. Chiang HL.
Erdogan ME.
Momoniat E.
Mariano PM. Casciola CM. De Angelis E.
Sarkar A. Paidoussis MP.
Gent AN. Hua KC.
Ramani DV. Keith WL. Rand RH.
Wilson JF. Callis EG.
515
539
555
569
581
593
The dynamic response of an incompressible non-linearly elastic membrane tube
subjected to a dynamic extension
A comparative study of kinematic hardening rules at nite deformations
The follower load problem and bifurcation to periodic motions
Lyapunov exponent and stochastic stability of quasi-non-integrable hamiltonian
systems
Generalization of the lorenz model to the two-dimensional convection of secondgrade uids
Coriolis eect on convection for a low prandtl number uid
27
Barhorst AA.
Barhorst AA.
Usha R. Ravindran R.
39(4) 2003
Tuzel VH. Erbay HA.
Tsakmakis C. Willuweit A.
MacEwen KW.
Zhu WQ.
Ferrario C. Passerini A. Thater G.
Khiri R.
28
605
619
635
649
665
673
689
Homoclinic bifurcation and chaos attractor in elastic two-bar truss
Nanomachines: a general approach to inducing a directed motion at the atomic
level
Compressive response and failure of braided textile composites: part 1 - experiments
Compressive response and failure of braided textile composites: part 2 - computations
Similarity solutions for creeping ow and heat transfer in second grade uids
Non-linear longitudinal vibrations of non-slender piezoceramic rods
Substructural interactions and transport in polymer ows (vol 39, pg 457, 2004)
Ario I.
Popov VL.
Quek SC. Waas AM. Shahwan KW. Agaram
V.
Quek SC. Waas A. Shahwan KW. Agaram V.
Yurusoy M.
von Wagner U.
Mariano PM. Casciola CM. De Angelis E.
691
Digital image processing for non-linear system identication
709
723
On the thermomechanical modeling of shape memory alloys
Electromagnetically conducting elastic plates in a magnetic eld: modeling and
dynamic implications
The analysis of the orientation eect of non-linear exible systems on performance
of the pendulum absorber
On non-linear stochastic dynamics of quarter car models
Rotating ow of a second-order uid on a porous plate
An innite interval problem arising in circularly symmetric deformations of shallow membrane caps
Chaotic motion in a class of asymmetrical kelvin type gyrostat satellite
The eect of the slip condition on stokes and couette ows due to an oscillating
wall: exact solutions
Stagnation-point ow of a viscoelastic uid towards a stretching surface
The eect of parametric excitation on a self-excited three-mass system
The attainable region of strain-invariant space for elastic materials
Uniaxial and non-proportionally multiaxial ratcheting of ss304 stainless steel at
room temperature: experiments and simulations
Large amplitude non-linear oscillations of a general conservative system
741
753
767
779
785
795
811
821
833
843
859
39(5) 2004
Chung HC. Liang J. Kushiyama S. Shinozuka
M.
Panoskaltsis VP. Bahuguna S. Soldatos D.
Librescu L. Hasanyan D. Ambur DR.
Yaman M. Sen S.
von Wagner U.
Hayat T. Hutter K.
Agarwal RP. O'Regan D.
Shirazi KH. Ghaari-Saadat MH.
Khaled ARA. Vafai K.
Mahapatra TR. Gupta AS.
Tondl A. Nabergoj R.
Currie PK.
Kang GZ. Gao Q. Yang XJ.
Wu BS. Lim CW.
1
19
55
85
107
121
Numerical study of the plastic behaviour in tension of welds in high strength
steels
Model of plastic anisotropy evolution with texture-dependent yield surface
A new criterion for mixed mode fracture initiation based on the crack tip plastic
core region
Micromechanical modeling of ductile damage of polycrystalline materials with
heterogeneous particles
Nonlocal plasticity eects on interaction of dierent size voids
On the portevin-le chatelier eect: theoretical modeling and numerical results
[review]
20(1) 2004
Rodrigues DM. Menezes LF. Loureiro A. Fernandes JV.
Kowalczyk K. Gambin W.
Khan SMA. Khraisheh MK.
Bonfoh N. Lipinski P. Carmasol A. Tiem S.
Tvergaard V. Niordson C.
Rizzi E. Hahner P.
167
199
225
255
269
291
309
323
Description of plastic anisotropy eects at large deformations - part i: restrictions
imposed by the second law and the postulate of il'iushin [review]
Description of plastic anisotropy eects at large deformations. part ii: the case
of transverse isotropy
Eect of void locking by inclusions upon the plastic behavior of porous ductile
solids - i: theoretical modeling and numerical study of void growth
Eect of void locking by inclusions upon the plastic behavior of porous ductile
solids - part ii: theoretical modeling and numerical study of void coalescence
The inuence of crystal structure on the dynamic behavior of materials at high
temperatures
Validation of the tangent formulation for the solution of the non-linear eshelby
inclusion problem
A model for the interaction of martensitic transformation with dislocations in
shape memory alloys
Finite thermoplasticity with phase changes based on isomorphisms
20(2) 2004
Tsakmakis C.
Hausler O. Schick D. Tsakmakis C.
Siruguet K. Leblond JB.
Siruguet K. Leblond JB.
Lennon AM. Ramesh KT.
Molinari A. El Houdaigui F. Toth LS.
Lovey FC. Condo AM. Torra V.
Dachkovski S. Bohm M.
29
International Journal of Pressure Vessels & Piping
597
607
655
An axisymmetric method of creep analysis for primary and secondary creep
Deaerator feedwater vessel weld cracking monitored over a service time of around
80,000 hours
Type iv creep cavity accumulation and failure in steel welds
Crack initiation and growth behaviour of circumferentially cracked pipes under
cyclic and monotonic loading
Determination of welding residual stress distribution in api x65 pipeline using a
modied magnetic barkhausen noise method
Inuence of mechanical mismatching on the failure of welded joints by void nucleation and coalescence
Complex leak-before-break analysis demonstrated on rbmk-1500 austenitic piping
665
Evaluation of crack tip constraint using photoelasticity
617
629
641
647
80(9) 2003
Jahed H. Bidabadi J.
Bulloch JH.
Smith DJ. Walker NS. Kimmins ST.
Singh PK. Vaze KK. Bhasin V. Kushwaha HS.
Gandhi P. Murthy DSR.
Ju JB. Lee JS. Jang JI. Kim WS. Kwon D.
Li XY. Hao Q. Shi YW. Lei YP. Marquis G.
Khmasauskas A. Rinikevicius S. Nedzinskas L.
Gasiunas S.
Ayatollahi MR. Safari H.
International Journal of Pressure Vessels & Piping
673
689
695
705
715
727
737
745
Deformation based temperature rise: a review
The evaluation of high-stress creep ductility for 316 stainless steel at 550 degrees
c by extrapolation of constitutive equations derived for lower stress levels
Creep life assessment of welded trunnion and branch components using the r5
procedure
Residual stress relief in mag welded joints of dissimilar steels
Numerical modelling of pipeline puncture under excavator loading. part i. development and validation of a nite element material failure model for puncture
simulation
Numerical modelling of pipeline puncture under excavator loading. part ii: parametric study
Experimental models of medium break loss of coolant accidents with and without
steam generator tube rupture
Eect of cyclic loading on elastic-plastic fracture resistance of pht system piping
material of phwr
80(10) 2003
Pandey KN. Chand S.
Xu Q. Hayhurst DR.
Patel RD.
Sedek P. Brozda J. Wang L. Withers PJ.
Brooker DC.
Brooker DC.
Marn J. Delic M. Skerget L.
Singh PK. Ranganath VR. Tarafder S. Prasad
P. Bhasin V. Vaze KK. Kushwaha HS.
International Journal of Solids & Structures
5865
5887
5901
5923
5949
5973
6001
6023
6043
6077
6095
6111
6125
6143
6163
6189
6211
6215
In-plane free vibration and stability of loaded and shear-deformable circular
arches
Basis free relations for the conjugate stresses of the strains based on the right
stretch tensor
Three-dimensional solution of smart laminated anisotropic circular cylindrical
shells with imperfect bonding
Analytical solutions for tapering quadratic and cubic rat-holes in highly frictional
granular solids
Sma-induced snap-through of unsymmetric ber-reinforced composite laminates
Craft - a plastic-damage-contact model for concrete. i. model theory and thermodynamic considerations
Craft - a plastic-damage-contact model for concrete. ii. model implementation
with implicit return-mapping algorithm and consistent tangent matrix
Interfacial mixed-mode fracture of adhesive bonds undergoing large deformation
Stationarity of the strain energy density for some classes of anisotropic solids
Eect of damping on dynamic behavior of a piezothermoelastic laminate considering the eects of transverse shear
Koiter circles in the buckling of axially compressed conical shells
Analysis of thin-walled curved box beam under in-plane exure
Magneto-thermo-elastic instability of ferromagnetic plates in thermal and magnetic elds
The weight function for cracks in piezoelectrics
Determination of hourglass coeÆcients in the theory of a cosserat point for nonlinear elastic beams
Creep simulation of asymmetric eects by use of stress mode dependent weighting
functions
Reply to: dr. lip teh's discussion on "work-conjugacy between rotation-dependent
moments and nite rotations" [vol. 40, no. 11, pp. 2851-2873]
Size eect and asymptotic matching approximations in strain-gradient theories
of micro-scale plasticity (vol 39, pg 5633, 2002)
40(22) 2003
Huang CS. Nieh KY. Yang MC.
Farahani K. Naghdabadi R.
Wang X. Zhong Z.
Thamwattana N. Hill JM.
Dano ML. Hyer MW.
Jeerson AD.
Jeerson AD.
Chai H.
Rovati M. Taliercio A.
Ishihara M. Noda N.
Spagnoli A.
Kim Y. Kim YY.
Wang XZ. Lee JS. Zheng XJ.
McMeeking R. Ricoeur A.
Nadler B. Rubin MB.
Mahnken R.
Ritto-Correa M. Camotim D.
Bazant ZP. Guo ZY.
30
6217
6245
6267
6285
6307
6335
6347
6369
6389
6417
6429
6445
6457
6473
6497
6513
6527
6547
Constitutive equations in nite viscoplasticity of semicrystalline polymers
Experimental and numerical study of the response of exible laminates to impact
loading
Eect of specimen size and crack depth on 3d crack-front constraint for senb
specimens
Probabilistic approach to the lame equations of linear elastostatics
Dynamic ber inclusions with elliptical and arbitrary cross-sections and related
retarded potentials in a quasi-plane piezoelectric medium
Variational formulations for tfem of piezoelectricity
Equilibrium conditions of a tensegrity structure
Stress concentrations in the particulate composite with transversely isotropic
phases
Cracking of an orthotropic substrate reinforced by an orthotropic plate
Optimal design of a two-layered elastic strip subjected to transient loading
Passing stiness anisotropy in multilayers and its eects on nanoscale surface
self-organization
Elasto-plastic analysis of an internally pressurized thick-walled cylinder using a
strain gradient plasticity theory
Eigenvalue-counting methods for non-proportionally damped systems
Adaptive multiscale wavelet-galerkin analysis for plane elasticity problems and
its applications to multiscale topology design optimization
Limitations of the coulomb friction assumption in fretting fatigue analysis
Singular electro-mechanical elds near the apex of a piezoelectric bonded wedge
under antiplane shear
Out-of-plane static analysis of circular arches by dqm
Buckling of stochastically heterogeneous beams, using a functional perturbation
method
40(23) 2003
Drozdov AD. Gupta RK.
Tan VBC. Shim VPW. Tay TE.
Kim Y. Chao YJ. Zhu XK.
Budaev BV. Bogy DB.
Wang JZ. Michelitsch TM. Gao HJ.
Qin QH.
Williamson D. Skelton RE. Han J.
Kushch VI.
Mahajan R. Erdogan F. Kilic B. Madenci E.
Velo AP. Gazonas GA.
Gao YF.
Gao XL.
Jo JS. Jung HJ. Ko MG. Lee IW.
Kim JE. Jang GW. Kim YY.
Naboulsi S. Nicholas T.
De Chen C. Chue CH.
Malekzadeh P. Karami G.
Altus E. Totry EM.
6567
6577
6593
6613
6633
6653
6669
6681
6703
6723
6767
6781
6799
6813
6839
6859
6877
6897
Mode iii stress intensity factors for edge-cracked circular shafts, bonded wedges,
bonded half planes and dcb's
Analysis of stress intensity factors of a ring-shaped interface crack
Multiple reciprocity boundary element analysis of two-dimensional anisotropic
thermoelasticity involving an internal arbitrary non-uniform volume heat source
An eÆcient higher order zigzag theory for composite and sandwich beams subjected to thermal loading
The coupled eects of plastic strain gradient and thermal softening on the dynamic growth of voids
Analysis of wave propagation in piezoelectric coupled cylinder aected by transverse shear and rotary inertia
Permeable cracks between two dissimilar piezoelectric materials
From particle ensembles to cosserat continua: homogenization of contact forces
towards stresses and couple stresses
Eect of strength-modulus correlation on reliability of randomly heterogeneous
beams
A new membrane model for the ballistic impact response and v-50 performance
of multi-ply brous systems
Active and passive magnetic constrained damping treatment
A coupled electromechanical analysis of a piezoelectric layer bonded to an elastic
substrate: part i, development of governing equations
A coupled electromechanical analysis of a piezoelectric layer bonded to an elastic
substrate: part ii, numerical solution and applications
A strength reliability model by markov process of unidirectional composites with
bers placed in hexagonal arrays
Frictional interface crack in anisotropic bimaterial under combined shear and
compression
Exact solutions for magneto-electro-elastic laminates in cylindrical bending
On higher gradients in continuum-atomistic modelling
A magnetoelastic theoretical model for soft ferromagnetic shell in magnetic eld
40(24) 2003
Shahani AR.
Noda NA. Kagita M. Chen MC. Oda K.
Shiah YC. Lin YJ.
Kapuria S. Dumir PC. Ahmed A.
Wu XY. Ramesh KT. Wright TW.
Wang Q. Liew KM.
Beom HG.
Ehlers W. Ramm E. Diebels S. D'Addetta GA.
Givli S. Altus E.
Phoenix SL. Porwal PK.
Zheng HM. Li M. He Z.
Zhang JQ. Zhang BN. Fan JH.
Zhang BN. Zhang JQ. Fan JH.
Goda K.
Sung JC. Chung WG.
Pan E. Heyliger PR.
Sunyk R. Steinmann P.
Zheng XJ. Wang XZ.
31
6913
6917
6937
6957
6969
A special issue in honour of george j. dvorak - preface
Thermoelastic generation of ultrasound by line-focused laser irradiation
Nonuniform transformation eld analysis
Debonding of short bres among particulates in a metal matrix composite
Kagorne plate structures for actuation
6981
On the performance of truss panels with kagome cores
6989
6999
7015
7035
7055
7063
Simulated properties of kagome and tetragonal truss core panels
Bending and exure of cylindrically monoclinic elastic cylinders
Field uctuations and macroscopic properties for nonlinear composites
Analysis of progressive ber debonding in elastic laminates
Failure plane orientations for transverse loading of a unidirectional ber composite
Localization and shear-crippling (kinkband) instability in a thick imperfect laminated composite ring under hydrostatic pressure
The saint-venant torsion of a circular bar consisting of a composite cylinder assemblage with cylindrically orthotropic constituents
Deterministic and stochastic optimization of composite cylindrical laminates
Generalized cowin-mehrabadi theorems and a direct proof that the number of
linear elastic symmetries is eight
Breakdown of elasticity theory for jammed hard-particle packings: conical nonlinear constitutive theory
Debonding of graded coatings under in-plane compression
Three-dimensional analysis of transient thermal stresses in functionally graded
plates
Size eect and asymptotic matching analysis of fracture of closed-cell polymeric
foam
Elastic-plastic and limit-state analyses of frames with softening plastic-hinge models by mathematical programming
7093
7109
7129
7143
7155
7181
7197
7219
40(25) 2003
Bazant ZP. Christensen RM. Torquato S.
Arias I. Achenbach JD.
Michel JC. Suquet P.
Tvergaard V.
Hutchinson RG. Wicks N. Evans AG. Fleck
NA. Hutchinson JW.
Wang J. Evans AG. Dharmasena K. Wadley
HNG.
Hyun S. Karlsson AM. Torquato S. Evans AG.
Crossley JA. England AH. Spencer AJM.
Idiart M. Castaneda PP.
Bahei-El-Din YA. Botrous AG.
Christensen RM. DeTeresa SJ.
Chaudhuri RA. Kim D.
Benveniste Y. Chen T.
Prochazka PP.
Ting TCT.
Torquato S. Donev A. Stillinger FH.
Chiu TC. Erdogan F.
Vel SS. Ratra RC.
Bazant ZP. Zhou Y. Zi GS. Daniel IM.
Cocchetti G. Maier G.
Inverse Problems in Engineering
457
471
495
515
541
561
Three-dimensional inverse design of axial compressor stator blade using neuralnetworks and direct navier-stokes solver
Dierent approaches for the solution of a backward heat conduction problem
Inversion of spectral emission measurements to reconstruct the temperature prole along a blackbody optical ber thermometer
Multidimensional inverse heat conduction problems solution via lagrange theory
and model size reduction techniques
Design of radiant enclosures using inverse and non-linear programming techniques
Regularizing operators of real-valued inverse laplace transformation
11(6) 2003
Giassi A. Pediroda V. Poloni C. Clarich A.
Chiwiacowsky LD. Velho HFD.
Barker DG. Jones MR.
Del Barrio EP.
Daun KJ. Howell JR. Morton DP.
Kryzhniy VV.
465
470
479
487
496
505
517
531
543
550
561
568
Energy considerations in systems with varying stiness
On the strain saturation conditions for polycrystalline ferroelastic materials
Relationship among coeÆcient matrices in symmetric galerkin boundary element
method for two-dimensional scalar problems
Intensity of singular stress elds at the end of a cylindrical inclusion
General solutions of anisotropic laminated plates
Concepts of separated j-integrals, separated energy release rates, and the component separation method of the j-integral for interfacial fracture mechanics
The mode iii crack problem in microstructured solids governed by dipolar gradient
elasticity: static and dynamic analysis
Gradient elasticity theory for mode iii fracture in functionally graded materials part i: crack perpendicular to the material gradation
Green's functions and boundary integral analysis for exponentially graded materials: heat conduction
Dual-species transport subject to sorptive exchange in pipe ow
Stability boundaries of a conservative gyroscopic system
Constraint forces and the method of auxiliary generalized speeds
70(4) 2003
Barber JR. Grosh K. Oh S.
Landis CM.
Yu GY.
Noda NA. Genkai T. Wang Q.
Yin WL.
Nishioka T. Syano S. Fujimoto T.
Georgiadis HG.
Paulino GH. Fannjiang AC. Chan YS.
Gray LJ. Kaplan T. Richardson JD. Paulino
GH.
Yip TL. Ng CO.
Gladwell GML. Khonsari MM. Ram YM.
Djerassi S. Bamberger H.
32
575
583
595
601
606
611
613
616
619
A dynamic generalized self-consistent model for wave propagation in particulate
composites
The analysis of constrained impulsive motion
Dynamic response of kirchho plate on a viscoelastic foundation to harmonic
circular loads
Frequency analysis of rotating conical panels: a generalized dierential quadrature approach
Comparison of stresses in center-wound rolls from two linear elastic models
Rate-dependent transition from thermal softening to hardening in elastomers
Elastic waves induced by surface heating in a half-space
Thermal stresses in an innite elastic pipe weakened by a nite cylindrical crack
Benchmark results for the problem of interaction between a crack and a circular
inclusion
Yang RB.
Wang LS. Chou WT.
Sun L.
Ng TY. Li H. Lam KY. Chua CF.
Debesis WR. Burns SJ.
Chen Z. Atwood JL. Mai YW.
Blanchard JP.
Itou S.
Wang J. Mogilevskaya SG. Crouch SL.
625
On corrosion-induced creep and the shedding of oxide pest from metal plates
633
Solidication of a nite medium subject to a periodic variation of boundary temperature
The inuence of initial elastic surface stresses on instrumented sharp indentation
Computational isotropic-workhardening rate-independent elastoplasticity
A unied characteristic theory for plastic plane stress and strain problems
Elastic eld in a semi-innite solid due to thermal expansion or a coherently
mistting inclusion
Boundary integral equation formulation in generalized linear thermoviscoelasticity with rheological volume
Dynamic analysis of a mode i propagating crack subjected to a concentrated load
On the mechanical modeling of functionally graded interfacial zone with a griÆth
crack: anti-plane deformation
A displacement equivalence-based damage model for brittle materials - part i:
theory
A displacement equivalence-based damage model for brittle materials - part ii:
verication
Stroh-like complex variable formalism for the bending theory of anisotropic plates
Response power spectrum of multi-degree-of-freedom nonlinear systems by a
galerkin technique
A new approach for reduced order modeling of mechanical systems using vibration
measurements
Linear multi-degree-of-freedom system stochastic response by using the harmonic
wavelet transform
Nonintegrability of an innite-degree-of-freedom model for unforced and undamped, straight beams
Equilibrium and belt-pulley vibration coupling in serpentine belt drives
The application of lagrange equations to mechanical systems with mass explicity
dependent on position
Approximate model for a viscoelastic oscillator
Flow control using rotating cylinders: eect of gap
Helical collapse of a whirling elastic rod forced to lie on a cylinder
Nonlinear free exural vibration of oval rings
Coincidence of boobnov-galerkin and closed-form solutions in an applied mechanics problem
Thermal stresses in an innite slab under an arbitrary thermal shock
Closure to "discussion of 'normal indentation of elastic half-space with a rigid
frictionless axisymmetric punch'" (2003, asme j. appl. mech., 70, pp. 783)
Discussion: "dynamic condensation and synthesis of unsymmetric structural systems" (rao, g. v., 2002, asme j. appl. mech., 69, pp. 610-616)
Closure to "discussion on dynamic condensation and synthesis of unsymmetrical
systems' " (2003, asme j. appl. mech., 70, p. 784)
638
644
649
655
661
668
676
681
688
696
708
715
724
732
739
751
757
762
771
774
777
779
783
784
785
70(5) 2003
Marshall DL. Taylor ME. Ivshin Y. Diderrich
G. Pence TJ.
Dursunkaya Z. Nair S.
Giannakopoulos AE.
Mukherjee S. Liu CS.
Zhang YQ. Hao H. Yu MH.
Davies JH.
El-Karamany AS.
Chung YL. Chen MR.
Wang YS. Huang GY. Dross D.
Soh CK. Liu Y. Yang Y. Dong Y.
Liu Y. Soh CK. Dong Y. Yang Y.
Hwu C.
Failla G. Spanos PD. Di Paola M.
Lus H. De Angelis M. Betti R.
Tratskas P. Spanos PD.
Yagasaki K.
Kong L. Parker RG.
Pesce CP.
Ketema Y.
Mittal S.
Van der Heijden GHM. Fraser WB.
Ganapathi M. Patel BP. Makhecha DP.
Elishako I. Zingales M.
Segall AE.
Chandra A. Fu G.
Qu ZQ.
Rao GV.
Journal of Biomechanical Engineering
569
578
Inhomogeneous cartilage properties enhance supercial interstitial uid support
and frictional properties, but do not provide a homogeneous state of stress
Polymer dynamics as a mechanistic model for the ow-independent viscoelasticity
of cartilage
125(5) 2003
Krishnan R. Park S. Eckstein F. Ateshian GA.
Fyhrie DP. Barone JR.
585
594
602
615
620
628
639
648
663
671
682
692
700
709
719
726
732
735
745
754
Hydrostatic pressurization and depletion of trapped lubricant pool during creep
contact of a rippled indenter against a biphasic articular cartilage layer
Inuence of stress magnitude on water loss and chondrocyte viability in impacted
articular cartilage
Modeling of neutral solute transport in a dynamically loaded porous permeable
gel: implications for articular cartilage biosynthesis and tissue engineering
Ash content modulation of torsionally derived eective material properties in
cortical mouse bone
A model for the modulation of microvessel permeability by junction strands
The uid shear stress distribution on the membrane of leukocytes in the microcirculation
Comparison of thermal insulation performance of brous materials for the advanced space suit
Numerical simulation of the ow and concentration elds for oxygen delivery
systems
A new method for evaluation of cavitation near mechanical heart valves
Numerical simulation of wall shear stress conditions and platelet localization in
realistic end-to-side arterial anastomoses
3-d nite-element models of human and monkey ngertips to investigate the mechanics of tactile sense
Analysis of prolapse in cardiovascular stents: a constitutive equation for vascular
tissue and nite-element modelling
Thermomechanical analysis of soft-tissue thermotherapy
Numerical simulation of ow in mechanical heart valves: grid resolution and the
assumption of ow symmetry
One-dimensional viscoelastic behavior of broblast populated collagen matrices
Eect of ber orientation and strain rate on the nonlinear uniaxial tensile material
properties of tendon
Compressive and shear properties of commercially available polyurethane foams
Geometrical stress-reducing factors in the anisotropic porcine heart valves
The relative position of edl muscle aects the length of sarcomeres within muscle
bers: experimental results and nite-element modeling
Methods for quasi-linear viscoelastic modeling of soft tissue: application to incremental stress-relaxation experiments
Soltz MA. Basalo IM. Ateshian GA.
Milentijevic D. Helfet DL. Torzilli PA.
Mauck RL. Hung CT. Ateshian GA.
Battaglia TC. Tsou AC. Taylor EA. Mikic B.
Fu BMM. Chen B.
Sugihara-Seki M. Schmid-Schonbein GW.
Paul HL. Diller KR.
Hangan H. Bekele S.
Johansen P. Manning KB. Tarbell JM.
Fontaine AA. Deutsch S. Nygaard H.
Longest PW. Kleinstreuer C.
Dandekar K. Raju BI. Srinivasan MA.
Prendergast PJ. Lally C. Daly S. Reid AJ. Lee
TC. Quinn D. Dolan F.
Aksan A. McGrath JJ.
Ge L. Jones SC. Sotiropoulos F. Healy TM.
Yoganathan AP.
Wagenseil JE. Wakatsuki T. Okamoto RJ. Zahalak GI. Elson EL.
Lynch HA. Johannessen W. Wu JP. Jawa A.
Elliott DM.
Thompson MS. McCarthy ID. Lidgren L. Ryd
L.
Luo XY. Li WG. Li J.
Maas H. Baan GC. Huijing PA. Yucesoy CA.
Koopman BHFJM. Grootenboer HJ.
Sarver JJ. Robinson PS. Elliott DM.
1409
1425
1427
1439
1453
1461
1469
1487
1497
1503
1511
1523
1529
1555
1571
"whither ows the uid in bone?" an osteocyte's perspective [review]
Introduction to the special issue
Fluid pressure gradients, arising from oscillations in intramedullary pressure, is
correlated with the formation of bone and inhibition of intracortical porosity
On bone adaptation due to venous stasis
Strain-derived canalicular uid ow regulates osteoclast activity in a remodelling
osteon - a proposal
The dependence of the elastic properties of osteoporotic cancellous bone on volume fraction and fabric
A review of morphology-elasticity relationships in human trabecular bone: theories and experiments [review]
The many adaptations of bone
A novel technique for four-point bending of small bone samples with semiautomatic analysis
How is the indentation modulus of bone tissue related to its macroscopic elastic
response? a validation study
Understanding stress concentration about a nutrient foramen
Collagen in connective tissue: from tendon to bone
Collagen self-assembly and the development of tendon mechanical properties [review]
Possible role of decorin glycosaminoglycans in bril to bril force transfer in relative mature tendons - a computational study from molecular to microstructural
level
Liquid crystalline assemblies of collagen in bone and in vitro systems
33
36(10) 2003
Tate MLK.
Cowin SC.
Qin YX. Kaplan T. Saldanha A. Rubin C.
Wang LY. Fritton SP. Weinbaum S. Cowin SC.
Burger EH. Klein-Nulend J. Smit TH.
Homminga J. Mccreadie BR. Weinans H.
Huiskes R.
Zysset PK.
Currey JD.
Draper ERC. Goodship AE.
Hengsberger S. Enstroem J. Peyrin F. Zysset
P.
Gotzen N. Cross AR. Ifju PG. Rapo AJ.
Vanderby R.
Silver FH. Freeman JW. Seehra GP.
Redaelli A. Vesentini S. Soncini M. Vena P.
Mantero S. Montevecchi FM.
Giraud-Guille MM. Besseau L. Martin R.
34
1587
1595
1603
1617
1625
1633
1641
1649
1659
1669
1675
1683
1691
1701
1713
1719
1727
1733
1739
1745
1751
Three-dimensional visualization and morphometry of small airways from microfocal x-ray computed tomography
Potential role of smooth muscle tone in early hypertension: a theoretical study
Comparative in vitro study on the long term performance of cemented hip stems:
validation of a protocol to discriminate between "good" and "bad" designs
Heelstrike and the pathomechanics of osteoarthrosis: a simulation study
Heelstrike and the pathomechanics of osteoarthrosis: a pilot gait study
Improvement of the reliability of ceramic hip joint implants
In vitro evaluation of combined graft deformation in anterior cruciate ligament
reconstructions
Mechanics of the tapered interference t in dental implants
Experimental evaluation of an elastic foundation model to predict contact pressures in knee replacements
Development and testing of a modular strain measurement clip
Longer moment arm results in smaller joint moment development, power and
work outputs in fast motions
Tensile damage and its eects on cortical bone
Inverse dynamic investigation of voluntary trunk movements in weightlessness: a
new microgravity-specic strategy
Biomechanical modeling and optimal control of human posture
The shape of the force-elbow angle relationship for maximal voluntary contractions and sub-maximal electrically induced contractions in human elbow exors
Force track analysis of contemporary hip simulators
On the elastic properties of arteries
Folding-unfolding of fn-iii domains in tenascin: an elastically coupled two-state
system
An approach for hip joint center calculation for use in seated postures
Finger force vectors in multi-nger prehension
Residual strains in conduit arteries (vol 36, pg 661, 2003)
1753
1761
1771
1785
1797
1813
1819
1829
1837
1845
1853
1865
Eects of damage on the orthotropic material symmetry of bovine tibial trabecular bone
Muscle activity reduces soft-tissue resonance at heel-strike during walking
Integrated approach for in vivo evaluation of respiratory muscles mechanics
Cartilage interstitial uid load support in unconned compression
Eects of inter- and extramuscular myofascial force transmission on adjacent
synergistic muscles: assessment by experiments and nite-element modeling
Correction for sensor creep in the evaluation of long-term plantar pressure data
An improved method of computing the wear factor for total hip prostheses involving the variation of relative motion and contact pressure with location on the
bearing surface
Evidence for a role of antagonistic cocontraction in controlling trunk stiness
during lifting
Reconstructed bone end loads on the canine forelimb during gait
A single-degree-of-freedom dynamic model predicts the range of human responses
to impulsive forces produced by power hand tools
Anatomically shaped osteochondral constructs for articular cartilage repair
1883
Straining of the intact and fractured proximal humerus under physiological-like
loading
Eect of loading rate on endplate and vertebral body strength in human lumbar
vertebrae
Analysis of the eect of disturbed ow on monocytic adhesion to endothelial cells
1897
Translational stiness of the replaced shoulder joint
1875
36(11) 2003
Sera T. Fujioka H. Yokota H. Makinouchi A.
Himeno R. Schroter RC. Tanishita K.
Humphrey JD. Wilson E.
Cristofolini L. Teutonico AS. Monti L. Cappello A. Toni A.
Gill HS. O'Connor JJ.
Gill HS. O'Connor JJ.
Weisse B. Zahner M. Weber W. Rieger W.
Hagemeister N. de Guise JA.
Bozkaya D. Muftu S.
Fregly BJ. Bei YH. Sylvester ME.
Whan G. Phillips J. Bullock S. Runciman RJ.
Pearce S. Hurtig M.
Nagano A. Komura T.
Kotha SP. Guzelsu N.
Pedrocchi A. Pedotti A. Baroni G. Massion J.
Ferrigno G.
Menegaldo LL. Fleury AD. Weber HI.
Hansen EA. Lee HD. Barrett K. Herzog W.
Calonius O. Saikko V.
Stephanis CG. Mourmouras DE. Tsagadopoulos DG.
Marin JL. Muniz J. Huerta M. Trujillo X.
Bush TR. Gutowski PE.
Zatsiorsky VM. Gao F. Latash ML.
Rachev A. Greenwald SE.
36(12) 2003
Liu XG. Wang XA. Niebur GL.
Wakeling JM. Liphardt AM. Nigg BM.
Ratnovsky A. Zaretsky U. Shiner RJ. Elad D.
Park SH. Krishnan R. Nicoll SB. Ateshian GA.
Yucesoy CA. Koopman BHFJM. Baan GC.
Grootenboer HJ. Huijing PA.
Arndt A.
Saikko V. Calonius O.
van Dieen JH. Kingma I. van der Bug JCE.
Coleman JC. Hart RT. Burr DB.
Lin JH. Radwin RG. Richard TG.
Hung CT. Lima EG. Mauck RL. Taki E. LeRoux MA. Lu HH. Stark RG. Guo XE. Ateshian
GA.
Maldonado ZM. Seebeck J. Heller MOW.
Brandt D. Hepp P. Lill H. Duda GN.
Ochia RS. Tencer AF. Ching RP.
Chiu JJ. Chen CN. Lee PL. Yang CT. Chuang
HS. Chien S. Usami S.
Oosterom R. Herder JL. van der Helm FCT.
Swieszkowski W. Bersee HEN.
1909
1917
Accuracy and repeatability of a pressure measurement system in the
patellofemoral joint
Noninvasive muscle tension measurement using the novel technique of magnetic
resonance elastography (mre)
35
Wilson DR. Apreleva MV. Eichler MJ. Harrold
FR.
Jenkyn TR. Ehman RL. An KN.
1605
1613
1629
1651
1675
Mechanical properties of sicw/al composite degraded by thermal cycling
Buckling analysis of an orthotropic layer bonded to a substrate with an interface
crack
Thermal deformation behavior of triaxial woven fabric (twf) composites with open
holes
Evolution of failure mechanisms in 2d and 3d woven composite systems under
quasi-static perforation
Mechanisms of hydrodynamically induced in-plane deformation of reinforcement
textiles in resin injection processes
37(18) 2003
Ahn JJ. Ochiai S.
Jeong KM. Beom HG.
Zhao Q. Hoa SV.
Baucom JN. Zikry MA.
Endruweit A. Gehrig S. Ermanni P.
1697
1713
1723
1745
1769
Similitude and physical modeling for buckling and vibration of symmetric crossply laminated circular cylindrical shells
Thermal conductivity and thermal contact conductance studies on al12 percent
si10wt. percent sicp metal matrix composites
Quasi-static and dynamic compressive behaviors of a s-2 glass-sc15 composite
Modeling of heat transfer and void dynamics for the thermoplastic composite
tow-placement process
Reduction in the number of independent parameters for the tsai-wu tensor polynomial theory of strength for composite materials
37(19) 2003
Ungbhakorn V. Singhatanadgid P.
Rao VV. Nagaraju J. Murthy MVK.
Song B. Chen WN. Weerasooriya T.
Tierney J. Gillespie JW.
DeTeresa SJ. Larsen GJ.
1791
1801
1821
1839
1851
The eect of si and mg on age hardening behavior of al-sicp composites
Cured shape of cross-ply composite thin shells
S2-glass/epoxy polymer nanocomposites: manufacturing, structures, thermal and
mechanical properties
An investigation of al-sicp composites under thermal cycling
Rigorous dynamic model-based economic design of the injected pultrusion process
with controllability considerations
37(20) 2003
Tekmen C. Cocen U.
Ren LB. Parvizi-Majidi A.
Haque A. Shamsuzzoha M. Hussain F. Dean
D.
Ozdemir I. Toparli M.
Srinivasagupta D. Kardos JL. Joseph B.
1885
1903
1921
1939
1951
1971
Macromechanical modeling and analysis of the viscoplastic behavior of unidirectional ber-reinforced composites
Exact solution for functionally graded anisotropic elastic composite laminates
Size eects and thickness constraints in composite joints
Cryogenic microcracking of carbon ber/epoxy composites: inuences of bermatrix adhesion
A computer simulation of single ber pull out process in a composite
Experimental and theoretical analysis of pulling force in pultrusion and resin
injection pultrusion (rip) - part ii: modeling and simulation (vol 37, pg 195,
2003)
37(21) 2003
Kawai M. Masuko Y.
Pan E.
Hou L. Liu DS.
Timmerman JF. Hayes BS. Seferis JC.
Zhong W. Pan N.
Ding ZM. Xu LQ. Li SJ. Lee LJ. Engelen H.
Journal of Computational & Applied Mathematics
0
1
11
19
Special issue - selected papers from the conference on computational and mathematical methods for science and engineering (cmmse-2002) - alicante university,
spain, 20-25 september 2002 - preface
Computational approach to the simplicity of f(4)(o-s,-) in the characteristic two
case
Third-order iterative methods without using any frechet derivative
Qualitatively stable nite dierence schemes for advection-reaction equations
158(1) 2003
Simos TE. Vigo-Aguiar J.
Bjerregaard PA. Gonzalez CM.
Amat S. Busquier S. Candela V.
Anguelov R. Lubuma JMS. Mahudu SK.
36
31
213
Finite elements numerical solution of a coupled prole-velocity-temperature shallow ice sheet approximation model
Iterative methods for least-square problems based on proper splittings
High-order nonreecting boundary conditions for the dispersive shallow water
equations
Unravelling small world networks
Newton-cotes formulae for long-time integration
Symplectic integrators for the numerical solution of the schrodinger equation
A generator of hybrid symmetric four-step methods for the numerical solution of
the schrodinger equation
Mathematical approaches to bone reformation phenomena and numerical simulations
Parameter uniform numerical method for singularly perturbed turning point problems exhibiting boundary layers
Trigonometrically tted predictor-corrector methods for ivps with oscillating solutions
Estimation by simulation of monotone dynamical systems
Fdem: how we make the fdm more exible than the fem
New ito-taylor expansions
Dissipative chebyshev exponential-tted methods for numerical solution of
second-order dierential equations
Integrability of hamiltonians with polynomial potentials
225
On solutions to ito stochastic dierential equations
43
49
61
75
83
93
107
121
135
145
157
169
187
Calvo N. Durany J. Vazquez C.
Climent JJ. Perea C.
Givoli D. Neta B.
Higham DJ.
Kalogiratou Z. Simos TE.
Kalogiratou Z. Monovasilis T. Simos TE.
Konguetsof A. Simos TE.
Matsuura Y. Oharu S. Takata T. Tamura A.
Natesan S. Jayakumar J. Vigo-Aguiar J.
Psihoyios G. Simos TE.
Santos MS.
Schonauer W. Adolph T.
Tocino A. Vigo-Aguiar J.
Vigo-Aguiar J. Ramos H.
Vigo-Aguiar MI. Sansaturio ME. Ferrandiz
JM.
Villarroel J.
233
243
277
297
317
339
355
379
397
407
419
443
473
485
Distance for degree raising and reduction of triangular bezier surfaces
An iteration-by-subdomain overlapping dirichlet/robin domain decomposition
method for advection-diusion problems
A class of methods for tting a curve or surface to data by minimizing the sum
of squares of orthogonal distances
Progressive scattered data ltering
Inverse q-columns updating methods for solving nonlinear systems of equations
Remarks on periodic boundary value problems for functional dierential equations
On the numerical solution of fredholm integral equations on unbounded intervals
Nondierentiable minimax fractional programming under generalized univexity
Oscillations of second-order nonlinear impulsive ordinary dierential equations
On some new nonlinear discrete inequalities and their applications
Rational approximation preconditioners for sparse linear systems
Symbolic-numerical methods for the computation of normal forms of pdes
A fast numerical method for evaluation of calderon commutators
A split step approach for the 3-d maxwell's equations
158(2) 2003
Rababah A.
Houzeaux G. Codina R.
Atieg A. Watson GA.
Iske A.
de Mendonca LF. Perez R. Lopes VLR.
Nieto JJ. Rodriguez-Lopez R.
Frammartino C. Laurita C. Mastroianni G.
Mishra SK. Wang SY. Lai KK. Shi JM.
He ZM. Ge WG.
Meng FW. Li WN.
Guillaume P. Saad Y. Sosonkina M.
Ahamadi M. Gervais JJ.
Goldberg MJ. Hrycak T. Kim S.
Lee JW. Fornberg B.
0
1
13
25
35
45
55
65
77
85
91
101
Proceedings of the 6th japan-china joint seminar on numerical mathematics, university of tsukuba, japan, 5-9 august 2002 - preface
On the convergence of parallel nonstationary multisplitting iteration methods
Verication methods for nonlinear equations with saddle point functions
Uniform pointwise convergence for a singularly perturbed problem using arclength equidistribution
A non-overlap domain decomposition method for the forward-backward heat
equation
On analogy and dissimilarity of dependence of stability on several parameters in
ow simulations
On the blow-up rate for fast blow-up solutions arising in an anisotropic crystalline
motion
An improvement in ds-bicgstab(l) and its application for linear systems in lattice
qcd
Finite element computation of magnetic eld problems with the displacement
current
A method of generating scratched look calligraphy characters using mathematical
morphology
Numerical analysis for semilinear evolution equations of parabolic type
Circulant and skew-circulant splitting methods for toeplitz systems
159(1) 2003
Natori M. Shi ZC. Kitagawa T.
Bai ZZ.
Chen XJ. Hashimoto K.
Chen YP.
Han H. Yin DS.
Hataue I.
Ishiwata T. Yazaki S.
Itoh S. Namekawa Y.
Kanayama H. Tagami D. Imoto K. Sugimoto
S.
Li W. Hagiwara I. Yasui T. Chen HA.
Nakaguchi E. Yagi A.
Ng MK.
109
119
129
137
149
161
173
185
195
Numerical conformal mappings of bounded multiply connected domains by the
charge simulation method
A projection method for generalized eigenvalue problems using numerical integration
Convergence of the rational interpolants of stieltjes functions
Error estimates for a fundamental solution method applied to reduced wave problems in a domain exterior to a disc
Discrete truncated powers and lattice points in rational polytope
On incompressible viscous uid ows with slip boundary conditions
Error estimation with guaranteed accuracy of nite element method in nonconvex
polygonal domains
Finite dierence method for detonation waves
A new domain decomposition method for an hjb equation
Okano D. Ogata H. Amano K. Sugihara M.
Sakurai T. Sugiura H.
Song B. Lian H.
Ushijima T. Chiba F.
Wang RH. Xu ZQ.
Watanabe J.
Yamamoto N. Hayakawa K.
Ying LA. Zhang XT.
Zhou SZ. Zhan WP.
205
217
241
249
269
285
319
325
341
365
375
387
399
411
431
467
On some log-cosine integrals related to zeta(3), zeta(4), and zeta(6)
Exponential tted runge-kutta methods of collocation type: xed or variable knot
points?
Absolute stability for multiple delay general lur'e control systems with multiple
nonlinearities
Construction of b-splines for generalized spline spaces generated from local ectsystems
A fast implementation for gmres method
On the boundary integral formulation of the plane theory of elasticity (computational aspects)
A generalization of a theorem of bochner
Asymptotic expansions for laguerre-like orthogonal polynomials
Monotone iterative methods for the adaptive nite element solution of semiconductor equations
Several remarks on acceleration of convergence using generalized linear methods
of summability
Existence of positive periodic solution for nonautonomous predator-prey system
with diusion and time delay
A note on the numerical solution of high-order dierential equations
Identication of contact regions in semiconductor transistors by level-set methods
A higher-order sublter-scale model for large eddy simulation
Variational and numerical analysis of a quasistatic viscoelastic contact problem
with adhesion
On the exponential stability of a class of nonlinear systems including delayed
perturbations
0
1
9
17
27
37
53
69
77
95
103
113
125
139
147
International conference on special functions and their applications (icsf2002) preface
K. srinivasa rao and his work
An analogue of euler's identity and new combinatorial properties of n-colour compositions
Wigner distribution transformations in high-order systems
On ideal-function-like functions
Some general theorems on the explicit evaluations of ramanujan's cubic continued
fraction
Theorems on partitions from a page in ramanujan's lost notebook
Partition identities and congruences associated with the fourier coeÆcients of the
euler products
Cubic theta functions
On certain transformations of poly-basic bilateral hypergeometric series
A new perspective on single and multi-variate dierential equations
On some slowly convergent series involving the hurwitz zeta-function
Extensions of certain classical integrals of erdelyi for gauss hypergeometric functions
Lie-theoretic generating relations of hermite 2d polynomials
On a hypergeometric identity of gelfand, graev and retakh
37
159(2) 2003
Coey MW.
Berghe GV. Van Daele A. Vyver HV.
He Y. Wu M.
Buchwald B. Muhlbach G.
Ayachour EH.
Abou-Dina MS. Ghaleb AF.
Ismail MEH.
Kzaz M. Maach F. Van Iseghem J.
Chen RC. Liu JL.
Tammeraid I.
Chen SH. Zhang JH. Young T.
Wang Y. Zhao YB. Wei GW.
Fang WF. Ito K.
Berselli LC. Iliescu T.
Chau O. Fernandez JR. Shillor M. Sofonea M.
Park JH. Jung HY.
160(1-2) 2003
Jagannathan R. Kanemitsu S. Vanden Berghe
G. Van Assche W.
Van Assche W. Vanden Berghe G. Van der
Jeugt J.
Agarwal AK.
Almeida JB. Lakshminarayanan V.
Balasubramanian R. Kanemitsu S. Ramachandra K.
Baruah ND. Saikia N.
Berndt BC. Yee AJ. Yi JH.
Chan HH. Lewis RP.
Cooper S.
Denis RY. Singh SN. Singh SP.
Gurappa N. Panigrahi PK. Shreecharan T.
Hashimoto M. Kanemitsu S. Tanigawa Y.
Yoshimoto M. Zhang WP.
Joshi CM. Vyas Y.
Khan S. Pathan MA.
Krattenthaler C. Rosengren H.
38
159
175
191
307
Automatic generation of hypergeometric identities by the beta integral method
Spectral analysis and the riemann hypothesis
Realizations of coupled vectors in the tensor product of representations of su(1,1)
and su(2)
The reciprocity relation of the selberg function
Some families of mordell curves associated to cubic elds
Ur,s(gl(4))-symmetry for (r,s)-hypergeometric series
Continuous and discrete bessel wavelet transforms
On multiindices and multivariables presentation of the voigt functions
Some properties of an extended wigner function
Selberg's integral and linear forms in zeta values
On irreducible p,q-representations of gl(2)
A nonterminating (8)phi(7) summation for the root system c-r
On the q-analogues of the zassenhaus formula for disentangling exponential operators
Special functions as solutions to discrete painleve equations
315
323
A special identity between three f-2(1)(a, b; c; 4) hypergeometric series
Algebraic values of analytic functions
209
217
233
241
251
259
265
271
283
297
Krattenthaler C. Rao KS.
Lachaud G.
Lievens S. Van der Jeugt J.
Mimachi K. Yoshida M.
Miyake K.
Nishizawa M.
Pathak RS. Dixit MM.
Pathan MA. Kamarujjama M. Alam MK.
Ramanathan R.
Rivoal T.
Sahai V. Srivastava S.
Schlosser M.
Sridhar R. Jagannathan R.
Tamizhmani KM. Ramani A. Tamizhmani T.
Grammaticos B.
Vanden Berghe G. De Meyer H.
Waldschmidt M.
1
27
41
67
75
99
119
133
145
161
179
193
203
217
231
A new aÆne scaling interior point algorithm for nonlinear optimization subject
to linear equality and inequality constraints
Analysis of the convergence behavior of the static localized nonlinear approximation for a problem in electromagnetism
Towards the resolution of the gibbs phenomena
Almost periodic solutions of forced lienard-type equations with time delays
Fast spherical fourier algorithms
A noncommutative version of the bispectral problem
Semi-implicit nite volume scheme for image processing in 3d cylindrical geometry
Computational method for analysis of polyethylene biodegradation
High-order collocation and quadrature methods for some logarithmic kernel integral equations on open arcs
Integral equation methods for scattering from an impedance crack
Algorithms and codes for the macdonald function: recent progress and comparisons
On the existence of positive solutions of p-laplacian dierence equations
Computing a matrix function for exponential integrators
Periodic solutions in an inhibitory two-neuron network
A proximal decomposition algorithm for variational inequality problems
161(1) 2003
Zhu DT.
French DA.
Shizgal BD. Jung JH.
Feng CH. Wang PG.
Kunis S. Potts D.
Grunbaum FA. Iliev P.
Mikula K. Sgallari F.
Watanabe M. Kawai F. Shibata M. Yokoyama
S. Sudate Y.
Dominguez V.
Kress R. Lee KM.
Fabijonas BR. Lozier DW. Rappoport JM.
He ZM.
Lu YY.
Guo SJ. Huang LH.
Han DR.
351
371
398
419
459
478
501
523
550
572
601
623
651
Incompressible limits of lattice boltzmann equations using multiple relaxation
times
Computation of multiphase systems with phase eld models
Exact boundary condition for time-dependent wave equation based on boundary
integral
High-order non-uniform grid schemes for numerical simulation of hypersonic
boundary-layer stability and transition
Optimized prefactored compact schemes
A moving grid nite element method applied to a model biological pattern generator
Numerical modelling of the two-dimensional fourier transformed vlasov-maxwell
system
Spectral/hp least-squares nite element formulation for the navier-stokes equations
A pressure-based algorithm for multi-phase ow at all speeds
Gerris: a tree-based adaptive solver for the incompressible euler equations in
complex geometries
An all-scale anelastic model for geophysical ows: dynamic grid deformation
A spectral element semi-lagrangian (sesl) method for the spherical shallow water
equations
Ghost uid method for strong shock impacting on material interface
190(2) 2003
Dellar PJ.
Badalassi VE. Ceniceros HD. Banerjee S.
Teng ZH.
Zhong XL. Tatineni M.
Ashcroft G. Zhang X.
Madzvamuse A. Wathen AJ. Maini PK.
Eliasson B.
Pontaza JP. Reddy JN.
Moukalled F. Darwish M. Sekar B.
Popinet S.
Prusa JM. Smolarkiewicz PK.
Giraldo FX. Perot JB. Fischer PF.
Liu TG. Khoo BC. Yeo KS.
39
1
Remeshed smoothed particle hydrodynamics for the simulation of laminar chemically reactive ows
18
40
Finite dierence heterogeneous multi-scale method for homogenization problems
Second kind integral equations for the classical potential theory on open surfaces
i: analytical apparatus
Stabilization and attitude of a triaxial rigid body by lie group methods
An "attachment kinetics-based" volume of fraction method for organic crystallization: a uid-dynamic approach to macromolecular-crystal engineering
Improved algorithm for geometry optimisation using damped molecular dynamics
Numerical solution to the time-dependent maxwell equations in axisymmetric
singular domains: the singular complement method
A cartesian grid method for modeling multiple moving objects in 2d incompressible viscous ow
Design and analysis of ale schemes with provable second-order time-accuracy for
inviscid and viscous ow simulations
Numerical simulation of the plasma of an electron cyclotron resonance ion source
De-aliasing on non-uniform grids: algorithms and applications
Application of gaussian quadratures to density functional (df) theories of conned
liquid crystals
Comparison of preconditioners for collocation chebyshev approximation of 2d and
3d generalized stokes problem
Stream function approach for determining optimal surface currents
Including electron inertia without advancing electron ow
A new modication of the immersed boundaries method for uid-solid ows:
moderate reynolds numbers
75
97
130
147
177
206
228
249
265
282
305
322
328
191(1) 2003
Chaniotis AK. Frouzakis CE. Lee JC.
Tomboulides AG. Poulikakos D. Boulouchos
K.
Abdulle A. Weinan E.
Jiang SD. Rokhlin V.
San Miguel A.
Lappa M.
Probert MIJ.
Assous F. Ciarlet P. Labrunie S. Segre J.
Russell D. Wang ZJ.
Geuzaine P. Grandmont C. Farhat C.
Girard A. Lecot C. Serebrennikov K.
Kirby RM. Karniadakis GE.
Chrzanowska A.
Garba A. Haldenwang P.
Peeren GN.
Jones ST. Parker SE.
Vikhansky A.
341
377
392
420
448
476
502
525
542
567
601
622
639
660
Semi-lagrangian schemes for the vlasov equation on an unstructured mesh of
phase space
A comprehensive three-dimensional model of the cochlea
A robust high-order compact method for large eddy simulation
An adaptive numerical scheme for high-speed reactive ow on overlapping grids
Numerical simulation of interfacial ows by smoothed particle hydrodynamics
Domain decomposition algorithms for fourth-order nonlinear elliptic eigenvalue
problems
Improved boundary conditions for viscous, reacting, compressible ows
Long-time numerical computation of electromagnetic elds in the vicinity of a
relativistic source
Higher-order time integration schemes for the unsteady navier-stokes equations
on unstructured meshes
An overset-grid method for 3d unsteady incompressible ows
A fast solver for the orthogonal spline collocation solution of the biharmonic
dirichlet problem on rectangles
Sph simulations of time-dependent poiseuille ow at low reynolds numbers
A weighted essentially non-oscillatory numerical scheme for a multi-class lighthillwhitham-richards traÆc ow model
A general reconstruction algorithm for simulating ows with complex 3d immersed boundaries on cartesian grids
191(2) 2003
Besse N. Sonnendrucker E.
Givelberg E. Bunn J.
Nagarajan S. Lele SK. Ferziger JH.
Henshaw WD. Schwendeman DW.
Colagrossi A. Landrini M.
Chang SL. Chien CS.
Sutherland JC. Kennedy CA.
Zagorodnov I. Schuhmann R. Weiland T.
Jothiprasad G. Mavriplis DJ. Caughey DA.
Tang HS. Jones SC. Sotiropoulos F.
Bialecki B.
Sigalotti LD. Klapp J. Sira E. Melean Y.
Hasmy A.
Zhang MQ. Shu CW. Wong GCK. Wong SC.
Gilmanov A. Sotiropoulos F. Balaras E.
1
21
36
73
95
105
124
Dynamics and topological aspects of a reconstructed two-dimensional foam time
series using potts model on a pinned lattice
Solving the two-body, bound-state bethe-salpeter equation
The sequential method for the black-oil reservoir simulation on unstructured grids
Non-uniform convergence of nite volume schemes for riemann problems of ideal
magnetohydrodynamics
Numerical algorithms for use in quantum information
Fictitious domain/nite element method for particulate ows
A weak legendre collocation spectral method for the solution of the incompressible
navier-stokes equations in unstructured quadrilateral subdomains
192(1) 2003
Vasconcelos IF. Cantat I. Glazier JA.
Mainland GB.
Li BY. Chen ZX. Huan GR.
Torrilhon M.
Ramos RV.
Diaz-Goano C. Minev PD. Nandakumar K.
Kondaxakis D. Tsangaris S.
40
157
175
211
231
244
262
277
312
325
355
Smooth particle hydrodynamics: importance of correction terms in adaptive resolution algorithms
Hybrid ux-splitting schemes for a common two-uid model
Analyzing radiation diusion using time-dependent sensitivity-based techniques
Integral-dierential equations approach to atomic three-body systems
A fast algorithm for three-dimensional potential elds calculation: fast fourier
transform on multipoles
A new class of truly consistent splitting schemes for incompressible ows
Parallel unsteady incompressible viscous ow computations using an unstructured
multigrid method
Quality-improved local renement of tetrahedral mesh based on element-wise
renement switching
A multidomain spectral method for supersonic reactive ows
A geometrical area-preserving volume-of-uid advection method
Alimi JM. Serna A. Pastor C. Bernabeu G.
Evje S. Flatten T.
Lee SL. Woodward CS. Graziani F.
Sultanov RA. Guster D.
Ong ET. Lim KM. Lee KH. Lee HP.
Guermond JL. Shen J.
Tai CH. Zhao Y.
Choi JH. Byun KR. Hwang HJ.
Don WS. Gottlieb D. Jung JH.
Aulisa E. Manservisi S. Scardovelli R. Zaleski
S.
3
13
37
73
95
123
145
167
177
In recognition of the 70th birthday of piero villaggio
On the form of the contact reaction in a solid circular plate simply supported
along two antipodal edge arcs and deected by a central transverse concentrated
force
The exact theory of plate bending
Boundary integral equations in dynamic problems for elastic plates
Classication of the spatial equilibria of the clamped elastica: symmetries and
zoology of solutions
Two-dimensional elastic herglotz functions and their applications in inverse scattering
Vibrations of thin piezoelectric exural shells: two-dimensional approximation
A molecular-statistical basis for the gent constitutive model of rubber elasticity
In general there are no unsheared tetrads
68(1-3) 2002
Fosdick R. Royer-Carfagni G.
Monegato G. Strozzi A.
Ladeveze P.
Chudinovich I. Constanda C.
Neukirch S. Henderson ME.
Sevroglou V. Pelekanos G.
Sabu N.
Horgan CO. Saccomandi G.
Boulanger P. Hayes M.
1
15
41
73
99
121
149
161
181
215
Stress singularity in an elastic cylinder of cylindrically anisotropic materials
Waves in constrained linear elastic materials
Geometry and mechanics of uniform n-plies: from engineering ropes to biological
laments
Asymmetric equilibrium congurations of symmetrically loaded isotropic square
membranes
Dynamic out of plane displacement elds for an inclined crack in graded materials
Chirality in the torsion of cylinders with trigonal symmetry
On the linearization of stress in constrained elasticity
Force-free states, relative strain, and soft elasticity in nematic elastomers
Angular dependence of rayleigh-wave velocity in prestressed polycrystalline media
with monoclinic texture
A note on maximum shear
69(1-3) 2002
Tarn JQ.
Tonon ML.
Neukirch S. van der Heijden GHM.
Tarantino AM.
Chalivendra VB. Shukla A. Parameswaran V.
Fraldi M. Cowin SC.
Lembo M.
Carlson DE. Fried E. Sellers S.
Tanuma K. Man CS.
Boulanger PH. Hayes M.
Journal of Engineering Materials & Technology
345
346
353
361
368
372
378
385
394
Special issue on durability and damage tolerance of heterogeneous materials and
structures - foreword
On the mechanical response in a thermal barrier system due to martensitic phase
transformation in the bond coat
Assessment of the fracture behavior of an asymmetrically loaded cantilever composite structure
Nanoindentation measurements on low-k porous silica thin lms spin coated on
silicon substrates
Spatial impact of a slender beam
Surface modication of powder metallurgy components with a direct diode laser
Eect of laser pre-treatment on the machining performance of aluminum/sic mmc
Control of damage in composite laminates by ply-stacking designs: characteristic
failure signatures and safety criteria
Eects of temperature and moisture on the high strain rate compression response
of graphite/epoxy composites
125(4) 2003
Pelegri AA. Karlsson AM.
Karlsson AM.
Shan BX. Pelegri AA.
Huang XQ. Pelegri AA.
Barbulescu H. Marghitu DB. Vaidya U.
Barnes S. Nash MJ. Kwok YK.
Barnes S. Morgan R. Skeen A.
Harik VM.
Hosur MV. Islam SMW. Vaidya UK. Dutta
PK. Jeelani S.
402
406
412
418
Evaluation method for fatigue strength of frp/metal adhesive joints considering
mean stress
Statistical analysis of experimental parameters in continuous indentation tests
using taguchi method
The eect of graded strength on damage propagation in continuously nonhomogeneous materials
Spatially averaged local strains in textile composites via the binary model formulation
41
Iwasa M. Hattori T.
Jeon EC. Park JS. Kwon D.
Thamburaj P. Santare MH. Gazonas GA.
Yang QD. Cox B.
Journal of Engineering Mathematics
83
101
121
137
161
Elasto-plastic localised responses in one-dimensional structural models
Steady ow past an elliptic cylinder inclined to the stream
Stuart vortices in a stratied mixing layer: the holmboe model
Unsteady free-surface ow induced by a line sink
Radiation of water waves from an oscillating source located at a slope of angle
pi/4
47(2) 2003
Coman CD. Bassom AP. Wadee MK.
Dennis SCR. Young PJS.
Mallier R.
Stokes TE. Hocking GC. Forbes LK.
Haugen KB. Tyvand PA.
1107
1108
1119
1130
1138
1149
1156
1164
1173
1189
1197
1206
1220
Study of environmental uid mechanics using state-of-the-art experimental techniques and instrumentation
Convection velocity of vortex structures in the near wake of a circular cylinder
Particle image velocimetry measurements within a laboratory-generated swash
zone
Laser-induced uorescence measurements of a turbulent plume
Field measurement of ship waves in victoria harbor
Experimental study of a horizontal jet in a wavy environment
Particle image velocimetry system with self-organized feature map algorithm
Shallow turbulent ows by video imaging method
Simultaneous particle image velocimetry and laser doppler velocimetry measurements of periodical oscillatory horseshoe vortex system near square cylinder-base
plate juncture
Combined particle image velocimetry/planar laser induced uorescence modeling
of buoyant jets
Laboratory measurements of void fraction and turbulence in the bore region of
surf zone waves
Cluster evolution and ow-frictional characteristics under dierent sediment availabilities and specic gravity
Field experiment study of transient stratied ow in an estuary
129(10) 2003
Wang KH. Teng MH. Chen HC.
Lin C. Hsieh SC.
Cowen EA. Sou IM. Liu PLF. Raubenheimer
B.
Webster DR. Rahman S. Dasi LP.
Chwang AT. Chen Y.
Mori N. Chang KA.
Chen Y. Chwang AT.
Zhang JB. Chu VH.
Lin C. Lai WJ. Chang KA.
Law AWK. Wang HW.
Cox DT. Shin SW.
Papanicolaou AN. Schuyler A.
Huang WR. Jones WK. Yang Q.
1225
1235
1245
1254
1268
1277
1288
1295
1308
1320
1330
1342
Eects of seismically induced pounding at expansion joints of concrete bridges
Vibration of thick and thin plates using a new triangular element
Dynamic stability of laminated composite curved panels with cutouts
Elastic stability and second-order analysis of three-dimensional frames: eects of
column orientation
Instantaneous optimal wilson-theta control method
Poromechanics of anisotropic hollow cylinders
Estimating uncertainty in the extreme value analysis of data generated by a
hurricane simulation model
Heterogeneous strain and bonded granular structure change in triaxial specimen
studied by computer, tomography
Creep analysis of axially loaded ber reinforced polymer-conned concrete
columns
Investigation of two- and three-dimensional models of transitional ow past a
square cylinder
Forced vertical vibration of circular plate in multilayered poroelastic medium
Exact solution for dynamic response of multi-degree-of-freedom bilinear hysteretic
systems
129(11) 2003
Kim SH. Shinozuka M.
Sheikh AH. Dey P. Sengupta D.
Sahu SK. Datta PK.
Aristizabal-Ochoa JD.
Bahar O. Banan MR. Mahzoon M. Kitagawa
Y.
Kanj M. Abousleiman Y. Ghanem R.
Coles S. Simiu E.
Chang CS. Matsushima T. Lee X.
Naguib W. Mirmiran A.
Saha AK. Muralidhar K. Biswas G.
Senjuntichai T. Sapsathiarn Y.
Liu JL.
42
1351
1355
1360
Thermal postbuckling of uniform columns on elastic foundation - intuitive solution
Vibratory characteristics of timoshenko beams with arbitrary number of cracks
Closure to "could the world trade center have been modied to prevent its collapse?" by david e. newland and david cebon
Rao GV. Raju KK.
Li QS.
Newland DE. Cebon D.
1363
1369
Tension buckling in multilayer elastomeric bearings
Rened solutions of externally induced sloshing in half-full spherical containers
1380
1394
Consistent nite-element response sensitivity analysis
Stress solution of multiple elliptic hole problem in plane elasticity
1408
Analytical solution for uid-structure interaction in liquid-lled pipes subjected
to impact-induced water hammer
Non-gaussian simulation: cumulative distribution function map-based spectral
correction
Second-order radiation boundary condition for water wave simulation with large
angle incidence
Connement-shear lattice model for concrete damage in tension and compression:
i. theory
Connement-shear lattice model for concrete damage in tension and compression:
ii. computation and validation
Electrorheological and magnetorheological duct ow in shear-ow mode using
herschel-bulkley constitutive model
Seismic design of structures by bundled columns
Numerical evaluation of uniform beam modes
Characterization of cement-based materials using diuse ultrasound
Analytical modeling, system identication, and tracking performance of uniaxial
seismic simulators
Characteristics of hyperconcentrated sediment-laden ows
1418
1429
1439
1449
1459
1466
1475
1478
1485
1489
129(12) 2003
Kelly JM.
Papaspyrou S. Valougeorgis D. Karamanos
SA.
Conte JP. Vijalapura PK. Meghella M.
Zhang LQ. Yue ZQ. Lee CF. Tham LG. Yang
ZF.
Li QS. Yang K. Zhang LX.
Masters F. Gurley KR.
Hsu TW. Lan YJ. Tsay TK. Lin KP.
Cusatis G. Bazant ZP. Cedolin L.
Cusatis G. Bazant ZP. Cedolin L.
Widjaja J. Samali B. Li JC.
Hahn GD. Champlin BP.
Tang Y.
Becker J. Jacobs LJ. Qu JM.
Twitchell BS. Symans MD.
Ni JR. Huang XJ. Borthwick AGL.
1
15
37
75
99
129
139
169
189
217
251
293
321
333
Shock wave formation in droplet impact on a rigid surface: lateral liquid motion
and multiple wave structure in the contact line region
On self-propulsion of micro-machines at low reynolds number: purcell's three-link
swimmer
Spanwise structure and scale growth in turbulent boundary layers
On the use of microjets to suppress turbulence in a mach 0.9 axisymmetric jet
Generalized taylor dispersion in suspensions of gyrotactic swimming microorganisms
Flow structures behind a heaving and pitching nite-span wing
Shock leakage through an unsteady vortex-laden mixing layer: application to jet
screech
On the onset of nonlinear oscillations in a separating boundary-layer ow
Baroclinic instability of time-dependent currents
Experimental investigation and numerical modelling of steep forced water waves
Turbulent channel ow near maximum drag reduction: simulations, experiments
and mechanisms
Experimental measurements of the normal stresses in sheared stokesian suspensions
Wave interaction with two-dimensional bodies oating in a two-layer uid:
uniqueness and trapped modes
Closed-form linear stability conditions for magneto-convection
1
11
51
A note on the resonant interaction between a surface wave and two interfacial
waves
A unied model of ames as gasdynamic discontinuities
Stability of planar ames as gasdynamic discontinuities
490 2003
Haller KK. Poulikakos D. Ventikos Y. Monkewitz P.
Becker LE. Koehler SA. Stone HA.
Tomkins CD. Adrian RJ.
Arakeri VH. Krothapalli A. Siddavaram V.
Alkislar MB. Lourenco LM.
Manela A. Frankel I.
von Ellenrieder KD. Parker K. Soria J.
Suzuki T. Lele SK.
Marquillie M. Ehrenstein U.
Pedlosky J. Thomson J.
Bredmose H. Brocchini M. Peregrine DH.
Thais L.
Ptasinski PK. Boersma BJ. Nieuwstadt FTM.
Hulsen MA. Van den Brule BHAA. Hunt JCR.
Singh A. Nott PR.
Kuznetsov N. McIver M. McIver P.
Kloosterziel RC. Carnevale GF.
491 2003
Jamali M. Lawrence GA. Seymour B.
Class AG. Matkowsky BJ. Klimenko AY.
Class AG. Matkowsky BJ. Klimenko AY.
65
101
131
161
183
207
229
239
259
275
285
301
325
353
379
Roles of non-aligned eigenvectors of strain-rate and subgrid-scale stress tensors
in turbulence generation
Receptivity of a high-speed boundary layer to acoustic disturbances
Turbulence and noise suppression of a high-speed jet by water injection
Shock waves, dead zones and particle-free regions in rapid granular free-surface
ows
The inuence of the thermal diusivity of the lower boundary on eddy motion in
convection
Nonlinear theory of geostrophic adjustment. part 2. two-layer and continuously
stratied primitive equations
Direct numerical simulations of turbulent channel ow with transverse square
bars on one wall
Oscillatory thermocapillary convection in open cylindrical annuli. part 1. experiments under microgravity
Oscillatory thermocapillary convection in open cylindrical annuli. part 2. simulations
Intermodal energy transfers in a proper orthogonal decomposition-galerkin representation of a turbulent separated ow
The eect of wall interactions in capillary-zone electrophoresis
Wave trapping and upstream inuence in stratied ow of large depth
Double-diusive and soret-induced convection in a shallow horizontal porous layer
Anisotropy and energy ux in wall turbulence
Heat propagation from a concentrated external energy source in a gas
Fedorov AV.
Krothapalli A. Venkatakrishnan L. Lourenco
L. Greska B. Elavarasan R.
Gray JMNT. Tai YC. Noelle S.
Hunt JCR. Vrieling AJ. Nieuwstadt FTM. Fernando HJS.
Zeitlin V. Reznik GM. Ben Jelloul M.
Leonardi S. Orlandi P. Smalley RJ. Djenidi L.
Antonia RA.
Schwabe D. Zebib A. Sim BC.
Sim BC. Zebib A. Schwabe D.
Couplet M. Sagaut P. Basdevant C.
Ghosal S.
Prasad D. Akylas TR.
Bahloul A. Boutana N. Vasseur P.
Dunn DC. Morrison JF.
Kurdyumov V. Sanchez AL. Linan A.
1
23
47
63
91
101
131
147
181
207
231
251
271
289
303
339
363
381
Nonlinear distortion of travelling waves in variable-area ducts with entropy gradients
Flow in a wavy-walled channel lined with a poroelastic layer
Stochastic averaging of nonlinear ows in heterogeneous porous media
Multiple states, stability and bifurcations of natural convection in a rectangular
cavity with partially heated vertical walls
Maximum drag reduction in a turbulent channel ow by polymer additives
Interaction of sedimenting spheres with multiple surface roughness scales
Comparing the two-dimensional cascades of vorticity and a passive scalar
From spheres to circular cylinders: the stability and ow structures of blu ring
wakes
Nearly symmetric and nearly baroclinic instabilities in the presence of diusivity.
part 1. growth rate patterns
Remote recoil: a new wave-mean interaction eect
Breakup in stochastic stokes ows: sub-kolmogorov drops in isotropic turbulence
Nonlinear saturation of the rayleigh instability due to oscillatory ow in a liquidlined tube
Experiments on highly supercritical thermal convection in a rapidly rotating
hemispherical shell
Instabilities of the stewartson layer part 1. the dependence on the sign of ro
Thermocapillary instability and wave formation on a lm falling down a uniformly
heated plane
Modelling thrust generation of a two-dimensional heaving airfoil in a viscous ow
Inertial instabilities of uid ow in precessing spheroidal shells
Instabilities of granular material undergoing vertical vibrations: a uniformly
driven layer
492 2003
Tyagi M. Sujith RI.
Wei HH. Waters SL. Liu SQ. Grotberg JB.
Tartakovsky DM. Guadagnini A. Riva M.
Erenburg V. Gelfgat AY. Kit E. Bar-Yoseph
PZ. Solan A.
Min T. Cho H. Jung YY.
Zhao Y. Davis RH.
Dubos T. Babiano A.
Sheard GJ. Thompson MC. Hourigan K.
Xu Q.
Buhler O. McIntyre ME.
Cristini V. Blawzdziewicz J. Loewenberg M.
Collins LR.
Halpern D. Grotberg JB.
Sumita I. Olson P.
Hollerbach R.
Kalliadasis S. Demekhin EA. Ruyer-Quil C.
Velarde MG.
Lewin GC. Haj-Hariri H.
Lorenzani S. Tilgner A.
Deng RS. Wang CH.
1
31
59
89
121
151
181
191
On the linear stability of swept attachment-line boundary layer ow. part 1.
spectrum and asymptotic behaviour
On the linear stability of swept attachment-line boundary layer ow. part 2.
non-modal eects and receptivity
Observations of inertial waves in a rectangular basin with one sloping boundary
Absolute and convective instability of a relaxational plane liquid jet
Hydromagnetic edge waves and instability in reduction cells
Nonlinear critical-layer evolution of a forced gravity wave packet
Evolution of a vortex in a rotating conducting uid
Transverse roll convection in horizontal plane couette ow
43
Horiuti K.
493 2003
Obrist D. Schmid PJ.
Obrist D. Schmid PJ.
Manders AMM. Maas LRM.
Soderberg LD.
Morris SJS. Davidson PA.
Campbell LJ. Maslowe SA.
Siso-Nadal F. Davidson PA. Graham WR.
Yoshikawa Y. Akitomo K.
44
209
219
231
255
277
287
319
345
363
379
Birth of three-dimensionality in a pulsed jet through a circular orice
A new family of uniform vortices related to vortex congurations before merging
Structure and stability of the compressible stuart vortex
On ne sediment transport by long waves in the swash zone of a plane beach
Vortex-induced instability of an incompressible wall-bounded shear layer
The three-dimensional instability of a strained vortex tube revisited
Velocity measurements of a shear ow penetrating a porous medium
Topological chaos in inviscid and viscous mixers
Particle migration in pressure-driven ow of a brownian suspension
An averaging method for nonlinear laminar ekman layers (vol 487, pg 81, 2003)
Bolzon G. Zovatto L. Pedrizzetti G.
Cerretelli C. Williamson CHK.
O'Reilly G. Pullin DI.
Pritchard D. Hogg AJ.
Sengupta TK. De S. Sarkar S.
Fukumoto Y.
Tachie MF. James DF. Currie IG.
Finn MD. Cox SM. Byrne HM.
Frank M. Anderson D. Weeks ER. Morris JF.
Andersen A. Lautrup B. Bohr T.
Journal of Fluids & Structures
1043
1059
1079
1095
1111
1123
1145
1161
1181
1203
1213
1237
Flow structure around two nite circular cylinders located in an atmospheric
boundary layer: side-by-side arrangement
Interference eect of an upstream larger cylinder on the lock-in vibration of a
exibly mounted circular cylinder
Vortex induced vibrations measured in service in the foinaven dynamic umbilical,
and lessons from prediction
Model study of noise eld in the human chest due to turbulent ow in a larger
blood vessel
Design of a tunnel-entrance hood with multiple windows and variable crosssection
Applications of biorthogonal decompositions in uid-structure interactions
A computational investigation of unsteady turbulent wake-boundary-layer interaction
Methods of uid-structure coupling in frequency and time domains using linearized aerodynamics for turbomachinery
A time-frequency technique for the stability analysis of impulse responses from
nonlinear aeroelastic systems
On the buckling and the strouhal law of uid columns: the case of turbulent jets
and wakes
Simulation of turbulent ows around a circular cylinder using nonlinear eddyviscosity modelling: steady and oscillatory ambient ows
Self-sustained oscillations of shear ow past a slotted plate coupled with cavity
resonance
17(8) 2003
Park CW. Lee SJ.
Lam KM. To AP.
Lyons GJ. Vandiver JK. Larsen CM. Ashcombe GT.
Borisyuk AO.
Howe MS.
Hemon P. Santi F.
Gete Z. Evans RL.
Tran DM. Liauzun C. Labaste C.
Dimitriadis G. Cooper JE.
Cervantes JG. Solorio FJ. Mendez F.
Saghaan M. Stansby PK. Saidi MS. Apsley
DD.
Ekmekci A. Rockwell D.
3
23
43
63
79
93
103
119
131
Nonlinear eects in transonic utter with emphasis on manifestations of limit
cycle oscillations
Random binary (coalescence) utter of a two-dimensional linear airfoil
Aeroelastic instability of aircraft wings modelled as anisotropic composite thinwalled beams in incompressible ow
Dynamic aero-structural response of an elastic wing model
Flow excited resonance of a conned shallow cavity in low mach number ow and
its control
Eects of exible walls on radiated sound from a turbulent boundary layer
Hysteresis phenomenon in the galloping oscillation of a square cylinder
Piv measurements of near wake behind a u-grooved cylinder
Vortex shedding behind a nonparallel pair of circular cylinders
18(1) 2003
Schewe G. Mai H. Dietz G.
Poirel D. Price SJ.
Qin Z. Librescu L.
Kampchen M. Dafnis A. Reimerdes HG. Britten G. Ballmann J.
Ziada S. Ng H. Blake CE.
Zheng ZC.
Luo SC. Chew YT. Ng YT.
Lim HC. Lee SJ.
Hiramoto R. Higuchi H.
147
149
165
179
197
215
Special issue - axial and internal ow uid-structure interactions - preface
An excitation spectrum criterion for the vibration-induced fatigue of small bore
pipes
The dynamic response of coriolis mass ow meters
Exact solution of linear hyperbolic four-equation system in axial liquid-pipe vibration
Simulation of sloshing motions in xed and vertically excited containers using a
2-d inviscid sigma-transformed nite dierence solver
Eect of gravity on a free-free elastic tank partially lled with incompressible
liquid
18(2) 2003
Amabili M. de Langre E.
Moussou P.
Cheesewright R. Clark C. Belhadj A. Hou YY.
Tijsseling AS.
Frandsen JB. Borthwick AGL.
Schotte JS. Ohayon R.
227
251
Reduced-order models for nonlinear vibrations of cylindrical shells via the proper
orthogonal decomposition method
Excitation and evolution of waves on an inhomogeneous exible wall in a mean
ow
Amabili M. Sarkar A. Paidoussis MP.
Lucey AD. Sen PK. Carpenter PW.
269
271
287
305
325
347
367
387
405
425
441
455
Special issue - blu-body/ow interactions - preface
Steady ow past a vertical surface-piercing circular cylinder
Mesh shape preservation for ow-induced vibration problems
Force coeÆcients and strouhal numbers of four cylinders in cross ow
Aerodynamic characteristics of two side-by-side circular cylinders and application
of wavelet analysis on the switching phenomenon
Reduction of uid forces acting on a single circular cylinder and two circular
cylinders by using tripping rods
The eect of ow perturbations on the near wake characteristics of a circular
cylinder
Numerical simulation of turbulent wake ows behind two side-by-side cylinders
Numerical aspects of simulating the ow-induced oscillations of a rectangular
blu body
Flow-induced vibration testing of replacement thermowell designs
On uniform planar shear ow around a circular cylinder at subcritical reynolds
number
Numerical solutions of a viscous uniform approach ow past square and diamond
cylinders
18(3-4) 2003
Dalton C. Tian CY. Paidoussis MP.
Chaplin JR. Teigen P.
So RMC. Liu Y. Lai YG.
Lam K. Li JY. So RMC.
Alam MM. Moriya M. Sakamoto H.
Alam MM. Sakamoto H. Moriya M.
Konstantinidis E. Balabani S. Yianneskis M.
Chen L. Tu JY. Yeoh GH.
Bunge U. Gurr A. Thiele F.
Haslinger KH.
Sumner D. Akosile OO.
Dalton C. Zheng W.
Journal of Fluids Engineering
749
758
767
779
786
796
806
813
823
835
843
851
863
871
880
887
895
902
910
922
927
Numerical analysis of cavitating ow of liquid helium in a converging-diverging
nozzle
A cavity wake model based on the viscous/inviscid interaction approach and its
application to nonsymmetric cavity ows in inducers
Experimental and numerical study of unsteady ow in a diuser pump at odesign conditions
The inlet ow structure of a centrifugal compressor stage and its inuence on the
compressor performance
Eects of seal geometry on dynamic impeller uid forces and moments
Supersonic through-ow fan blade cascade studies
Unsteady gust response of road vehicles
Integral solution for the mean ow proles of turbulent jets, plumes, and wakes
Resolving turbulent wakes
Mixing and entrainment characteristics of circular and noncircular conned jets
Behavior of radial incompressible ow in pneumatic dimensional control systems
Measurements of resistance of individual square-mesh screens to oscillating ow
at low and intermediate reynolds numbers
Turbulent boundary layers over surfaces smoothed by sanding
Inuence of three-dimensional roughness on pressure-driven ow through microchannels
Frictional performance of u-type wavy tubes
An expermentally validated model for two-phase pressure drop in the intermittent
ow regime for noncircular microchannels
Out-of-plane motion eects in microscopic particle image velocimetry
Modeling of the onset of gas entrainment through a nite-side branch
Air entrainment processes in a circular plunging jet: void-fraction and acoustic
measurements
Capturing the pinch-o of liquid jets by the level set method
On the water-entry-induced cavity closure for a wide range of entry speeds
Journal of Intelligent Material Systems & Structures
475
483
497
Design and experimental verication of pseudoelastic-based constant-force springs
Closed-loop position control of preisach hystereses
Design and experimental validation of an adaptive neurocontroller for vibration
suppression
45
125(5) 2003
Ishimoto J. Kamijo K.
Semenov Y. Tsujimoto Y.
Wang H. Tsukamoto H.
Engeda A. Kim Y. Aungier R. Direnzi G.
Yoshida Y. Tsujimoto Y. Morimoto G. Nishida
H. Morii S.
Chesnakas CJ. Ng WF.
Filippone A.
Agrawal A. Prasad AK.
Jordan SA.
Singh G. Sundararajan T. Bhaskaran KA.
Roy G. Vo-Ngoc D. Nguyen DN. Florent P.
Wakeland RS. Keolian RM.
Schultz MP. Flack KA.
Hu YD. Werner C. Li DQ.
Chen IY. Lai YK. Wang CC.
Garimella S. Killion JD. Coleman JW.
Olsen MG. Bourdon CJ.
Ahmed M. Hassan I. Esmail N.
Chanson H. Manasseh R.
Pan Y. Suga K.
Lee M.
14(8) 2003
Soroushian P. Chowdhury H. Nossoni A.
Gorbet RB. Morris KA.
Jha R. He CL.
46
507
521
Theoretical and experimental investigation of the spatial ltering properties of a
number of concentric annular strain sensors
Experimental investigation of damage detection in composite material structures
using a laser vibrometer and piezoelectric actuators
Kidner MRF. Batton B. Johnson ME.
Ghoshal A. Chattopadhyay A. Schulz MJ.
Thornburgh R. Waldron K.
541
551
563
577
587
Modeling of a magnetorheological actuator including magnetic hysteresis
Damping eects on the state-switched absorber used for vibration suppression
Optimal sizes and placements of piezoelectric actuators and sensors for an inated
torus
Dynamic behavior of telescopic actuators
Thermo-electro-mechanical behavior of ferroelectric materials - part i: a computational micromechanical model versus experimental results
14(9) 2003
An J. Kwon DS.
Holdhusen MH. Cunefare KA.
Jha AK. Inman DJ.
Vendlinski J. Brei D.
Mauck LD. Lynch CS.
605
623
633
643
657
Thermo-electro-mechanical behavior of ferroelectric materials part ii: introduction of rate and self-heating eects
Shape memory mechanics of an elastic memory composite resin
An equivalent circuit model for ionic polymer-metal composites and their performance improvement by a clay-based polymer nano-composite technique
Piezoceramic telescopic actuator quasi-static experimental characterization
Combined nite element analysis - genetic algorithm method for the design of
ultrasonic motors
14(10) 2003
Weiland LM. Lynch CS.
Abrahamson ER. Lake MS. Munshi NA. Gall
K.
Paquette JW. Kim KJ. Nam JD. Tak YS.
Alexander PW. Brei D.
Bouchilloux P. Uchino K.
671
677
693
707
719
Reversible shape change and energy conversion of semi-smart structure composed
of ti-ni alloys and elastic metals
Delta wing utter control using spatially optimized transducers
Piezoelectric materials at elevated temperature
Constitutive equations for an induced-strain bending actuator with a variable
substrate
A free energy model for hysteresis in ferroelectric materials
14(11) 2003
Nagai H. Ota H. Oishi R. Xu Y. Yoshida H.
Richard RE. Clark RL.
Schulz MJ. Sundaresan MJ. McMichael J.
Clayton D. Sadler R. Nagel B.
Leo DJ. Kothera C. Farinholt K.
Smith RC. Seelecke S. Ounaies Z. Smith J.
Journal of Microelectromechanical Systems
533
540
Force-controllable, optically driven micromachines fabricated by single-step twophoton micro stereolithography
Optical detection of the coriolis force on a silicon micromachined gyroscope
550
Integrated magnetic sensing of electrostatically actuated thin-lm microbridges
557
567
Air damping in laterally oscillating microresonators: a numerical and experimental study
Fluid damping in resonant exural plate wave device
577
Electrostatic charge and eld sensors based on micromechanical resonators
590
613
A microfabricated electrochemical oxygen generator for high-density cell culture
arrays
A microfabricated suspended-tube chemical reactor for thermally eÆcient fuel
processing
A hydrogel-actuated environmentally sensitive microvalve for active ow control
622
Microfabrication of palladium-silver alloy membranes for hydrogen separation
630
A microbubble-powered bioparticle actuator
600
12(5) 2003
Maruo S. Ikuta K. Korogi H.
Annovazzi-Lodi V. Merlo S. Norgia M. Spinola
G. Vigna B. Zerbini S.
Gaspar J. Li HH. Freitas PP. Chu V. Conde
JP.
Ye WJ. Wang X. Hemmert W. Freeman D.
White J.
Weinberg MS. Dube CE. Petrovich A. Zapata
AM.
Riehl PS. Scott KL. Muller RS. Howe RT. Yasaitis JA.
Maharbiz MM. Holtz WJ. Sharifzadeh S.
Keasling JD. Howe RT.
Arana LR. Schaevitz SB. Franz AJ. Schmidt
MA. Jensen KF.
Baldi A. Gu YD. Loftness PE. Siegel RA. Ziaie
B.
Tong HD. Berenschot JWE. De Boer MJ. Gardeniers JGE. Wensink H. Jansen HV. Nijdam
W. Elwenspock MC. Gielens EC. van Rijn
CJM.
Maxwell RB. Gerhardt AL. Toner M. Gray
ML. Schmidt MA.
641
649
702
Cross-linked pmma as a low-dimensional dielectric sacricial layer
Nonlinear nite element analysis of a thin piezoelectric laminate for micro power
generation
Charge control of parallel-plate, electrostatic actuators and the tip-in instability
A reduced-order model for electrically actuated microbeam-based mems
Analytical approach and numerical alpha-lines method for pull-in hyper-surface
extraction of electrostatic actuators with multiple uncoupled voltage sources
A design methodology for a bulk-micromachined two-dimensional electrostatic
torsion micromirror
Monolithic fringe-eld-activated crystalline silicon tilting-mirror devices
708
Crystalline silicon tilting mirrors for optical cross-connect switches
713
Low-actuation voltage rf mems shunt switch with cold switching lifetime of seven
billion cycles
Calibration of mems strain sensors fabricated on silicon: theory and experiments
656
672
681
692
720
728
740
748
Robust mask-layout and process synthesis
Ic-integrated exible shear-stress sensor skin
Electronically controllable microvalves based on smart hydrogels: magnitudes and
potential applications
Teh WH. Liang CT. Graham M. Smith CG.
Xu CG. Fiez TS. Mayaram K.
Seeger JI. Boser BE.
Younis MI. Abdel-Rahman EM. Nayfeh A.
Elata D. Bochobza-Degani O. Nemirovsky Y.
Hao ZL. Wingeld B. Whitley M. Brooks J.
Hammer JA.
Greywall DS. Pai CS. Oh SH. Chang CP.
Marom DM. Busch PA. Cirelli RA. Taylor JA.
Klemens FP. Sorsch TW. Bower JE. Lai WYC.
Soh HT.
Greywall DS. Busch PA. Pardo F. Carr DW.
Bogart G. Soh HT.
Chan R. Lesnick R. Becher D. Feng M.
Hautamaki C. Cao L. Zhou J. Mantell SC. Kim
TS.
Ma L. Antonsson EK.
Xu Y. Tai YC. Huang A. Ho CM.
Richter A. Kuckling D. Howitz S. Gehring T.
Arndt KF.
1
13
33
65
Simple constitutive equation for linear polymer melts derived from molecular
theory: rolie-poly equation
Three-dimensional viscoelastic ows through a rectangular channel with a cavity
Asymmetric ows of viscoelastic uids in symmetric planar expansion geometries
Deformation of a newtonian drop in a viscoelastic matrix under steady shear ow
- experimental validation of slow ow theory
114(1) 2003
Likhtman AE. Graham RS.
Yamamoto T. Ishiyama M. Nakajima M.
Nakamura K. Mori N.
Oliveira PJ.
Guido S. Simeone M. Greco F.
83
109
149
185
197
229
Bubble dynamics in viscoelastic uids with application to reacting and nonreacting polymer foams
Turbulent pipe ow predictions with a low reynolds number k-epsilon model for
drag reducing uids
A gnf framework for turbulent ow models of drag reducing uids and proposal
for a k-epsilon type closure
Planar contraction ow with a slip boundary condition
A wavelet-galerkin method for simulating the doi model with orientationdependent rotational diusivity
Parallel shear ows of uids with a pressure-dependent viscosity
1
27
51
Drop pinch-o and lament dynamics of wormlike micellar uids
Viscoplastic ow around a cylinder in an innite medium
Natural element meshless simulation of ows involving short ber suspensions
79
115
125
157
191
Characterization of chaotic thermal convection of viscoelastic uids
Propagation of the interface in a uid suspension after the onset of shear ow
A spectral vanishing viscosity method for stabilizing viscoelastic ows
Linear stability analysis of time-dependent algorithms with spectral element
methods for the simulation of viscoelastic ows
A numerical study of the measurement of elongational viscosity of polymeric uids
in a semihyperbolically converging die
47
114(2-3) 2003
Everitt SL. Harlen OG. Wilson HJ. Read DJ.
Cruz DOA. Pinho FT.
Pinho FT.
Joshi YM. Denn MM.
Suen JK. Nayak R. Armstrong RC. Brown RA.
Renardy M.
115(1) 2003
Smolka LB. Belmonte A.
De Besses BD. Magnin A. Jay P.
Martinez MA. Cueto E. Doblare M. Chinesta
F.
115(2-3) 2003
Abu-Ramadan E. Hay JM. Khayat RE.
Nouar C. Riha R. Lefevre A.
Ma X. Symeonidis V. Karniadakis GE.
Fietier N. Deville MO.
Feigl K. Tanner F. Edwards BJ. Collier JR.
48
Journal of Reinforced Plastics & Composites
1335
1353
1373
1389
1409
Design of cfrp composite connector for precast concrete elements
Anchorage systems for masonry walls strengthened with frp composite laminates
The use of frp composites in enhancing the structural behavior of timber beams
Shear performance of frp reinforced concrete beams
A framework for life-cycle cost assessment of composites in construction
22(15) 2003
Pantelides CP. Reaveley LD. McMullin PW.
Tan KH. Patoary MKH. Roger CSK.
Gilllan JR. Gilbert SG. Patrick GRH.
Guadagnini M. Pilakoutas K. Waldron P.
Hastak M. Mirmiran A. Richard D.
Journal of Reinforced Plastics & Composites
1437
1455
1467
1477
1497
Numerical simulation on the void distribution in the ber mats during the lling
stage of rtm
Basic principles in materials selection for mechanical fastening of thermoplastics
Water ingression and compression properties of epoxy containing ash particles
with their surfaces containing paraÆn oil lm
Eect of lamina material properties on dilatation and through-thickness poisson's
ratio of angle-ply laminates
Numerical simulation of three-dimensional mold lling in resin transfer molding
22(16) 2003
Chang CY. Shih MS.
Kagan VA. Weitzel SP.
Kishore SSM. Kulkarni SM.
Yeh FL. Yeh HY.
Shojaei A. Ghaarian SR. Karimian SMH.
Journal of Sound & Vibration
405
407
443
453
465
481
493
515
535
553
573
585
601
613
625
645
655
667
677
687
699
711
First international isma workshop on noise and vibration in agricultural and biological engineering - leuven, belgium, 13-14 september 2000 - foreword
Vibro-acoustic analysis procedures for the evaluation of the sound insulation characteristics of agricultural machinery cabins
A study of vibration characteristics on a luxury wheelchair and a new prototype
wheelchair
Descriptive analysis of combine cabin vibrations and their eect on the human
body
Determination of the dynamical behaviour of biological materials during impact
using a pendulum device
A multibody dynamic approach for colliding particles
Discrete element modelling for process simulation in agriculture
Comparison between the discrete and nite element methods for modelling an
agricultural spray boom - part 1: theoretical derivation
Comparison between the discrete and nite element methods for modelling an
agricultural spray boom - part 2: automatic procedure for transforming the equations of motion from force to displacement input and validation
A generalized modelling technique for linearized motions of mechanisms with
exible parts
Design of an active suspension to suppress the horizontal vibrations of a spray
boom
Measurements and simulation on the comfort of forklifts
Vibration control using self-organizing look-up tables
System for vertical boom corrections on hilly elds
Dierences in chewing sounds of dry-crisp snacks by multivariate data analysis
Double adaptive notch lter for mechanical grain ow sensors
First experiments on ultrasonic crop density measurement
Considering the inuence of articial environmental noise to study cough timefrequency features
Fuzzy approach for improved recognition of citric acid induced piglet coughing
from continuous registration
Analysis of pain-related vocalization in young pigs
Parameter estimation and multivariable model building for the non-destructive,
on-line determination of eggshell strength
Experimental analysis of the dynamic, mechanical behaviour of a chicken egg
266(3) 2003
Ramon H. Hostens I.
Desmet W. Pluymers B. Sas P.
Hostens I. Papaioannou Y. Spaepen A. Ramon
H.
Hostens I. Ramon H.
Van Zeebroeck M. Tijskens E. Van Liedekerke
P. Deli V. De Baerdemaeker J. Ramon H.
van Staeyen K. Tijskens E. Ramon H.
Tijskens E. Ramon H. De Baerdemaeker J.
Anthonis J. Ramon H.
Anthonis J. Hostens I. Mouazen AM. Moshou
D. Ramon H.
Verschoore R. Pieters JG. Pollet IV.
Moshou D. Ramon H.
Deprez K. Anthonis J. Ramon H.
De Belie N. Sivertsvik M. De Baerdemaeker J.
Maertens K. Reyns P. De Baerdemaeker J.
Maertens K. Reyns P. De Clippel J. De
Baerdemaeker J.
Van Hirtum A. Berckmans D.
Van Hirtum A. Berckmans D.
Marx G. Horn T. Thielebein J. Knubel B. von
Borell E.
De Ketelaere B. Vanhoutte H. De Baerdemaeker J.
Coucke P. De Ketelaere B. De Baerdemaeker
J.
49
723
737
759
775
785
805
815
833
847
875
889
905
912
919
927
928
An alternative derivation of dynamic admittance matrix of piezoelectric cantilever
bimorph
A new exact substructure method using mixed modes
Dynamics modelling of a exible hub-beam system with a tip mass
Boundary feedback stabilization of the sine-gordon equation without velocity
feedback
A numerical study on the ow and sound elds of centrifugal impeller located
near a wedge
On-line detection of fatigue cracks using an automatic mode tracking technique
Combined damage detection techniques
The high frequency, transient response of a panel with attached masses
Optimal control of structures with semiactive-tuned mass dampers
Response of a strongly non-linear oscillator to narrowband random excitations
Interaction due to mechanical sources in micropolar elastic medium with voids
Sliding control accounting for hardware limitation of mechanical actuators with
deadzone
On the vibration analysis of rectangular clamped plates using the virtual work
principle
Approximation closure method of fpk equations
Frequency response of a moderately thick antisymmetric cross-ply cylindrical
panel using mixed type of fourier solution functions (vol 259, pg 809, 2003)
Exact solution of the asymmetric mindlin's plate equations applied to a disk (vol
261, pg 153, 2003)
266(4) 2003
Lu P. Lee KH.
Qiu JB. Williams FW. Qiu RX.
Yang H. Hong JZ. Yu ZY.
Kobayashi T.
Jeon WH. Lee DJ.
Vanlanduit S. Verboven P. Guillaume P.
Vanlanduit S. Parloo E. Guillaume P.
Reynolds RR. Provencher BD. Shesterikov SA.
Aldemir U.
Rong HW. Meng G. Wang XD. Xu W. Fang
T.
Kumar R. Choudhary S.
Sheng J. Sun JQ.
Arenas JP.
Rong HW. Wang XD. Meng G. Xu W. Fang
T.
Kabir HRH. Al-Khalee AM. Chaudhuri RA.
El-Raheb M.
929
943
957
967
981
993
1009
1025
1053
1079
1099
1109
1117
Multiple mode current owing passive piezoelectric shunt controller
Modal parameter identication through gabor expansion of response signals
Seismic response of bridge piers on elasto-plastic winkler foundation allowed to
uplift
Acoustic characteristics of annular cavities with locally non-uniform media
Instability of the voltage transfer function for an mr103 microphone in a coupler
calibration technique
Finite element simulation of non-linear acoustic generation in a horn loudspeaker
An inverse model of mr damper using optimal neural network and system identication
A methodology for predicting impact-induced acoustic noise in machine systems
Phononic band gaps and vibrations in one- and two-dimensional mass-spring
structures
Application of vortex sound theory to vortex-pairing noise: sensitivity to errors
in ow data
Natural frequencies of an immersed beam carrying a tip mass with rotatory inertia
Vibration of wires used in electro-discharge machining
Inuence of suspension damper asymmetry on vehicle vibration response to
ground excitation
266(5) 2003
Behrens S. Moheimani SOR. Fleming AJ.
Zhang ZY. Hua HX. Xu XZ. Huang Z.
Chen XC. Lai YM.
Choi HG. Yoo SW. Jeong JD. Lee JM.
Horiuchi R. Fujimori T. Sato S.
Tsuchiya T. Kagawa Y. Doi M. Tsuji T.
Xia PQ.
Oppenheimer CH. Dubowsky S.
Jensen JS.
Schram C. Hirschberg A.
Oz HR.
Shahruz SM.
Rajalingham C. Rakheja S.
1
29
57
67
87
105
167
178
187
Computational analysis for dynamic response of a rotating shaft on exible support structure with clearances
Exact dynamic and static stiness matrices of shear deformable thin-walled beamcolumns
Material characterization of er uids at high frequency
An elastodynamic solution of nite long orthotropic hollow cylinder under torsion
impact
Detecting cracks in a longitudinally vibrating beam with dissipative boundary
conditions
Automotive disc brake squeal [review]
Exact modelling of kinetic energy in truss-type members
Chatter identication with mutual information
The relationship between the resonant and natural frequency for non-viscous
systems
267(1) 2003
Hu K. Mourelatos ZP. Vlahopoulos N.
Moon-Young K. Nam K. Hee-Taek Y.
Kim J. Kim JY. Choi SB.
Wang X. Xia XH. Hao WH.
Dilena M. Morassi A.
Kinkaid NM. O'Reilly OM. Papaclopoulos P.
Ahmida KM. Arruda JRF.
Berger B. Belai C. Anand D.
Vinokur R.
50
191
209
227
245
253
267
279
301
335
355
366
371
Forced vibration of euler-bernoulli beams by means of dynamic green functions
Dynamic stability of a rotating beam with a constrained damping layer
Symplectic analysis for periodical electro-magnetic waveguides
Compensation for discarded singular values in vibro-acoustic inverse methods
Cyclic statistics in rolling bearing diagnosis
Flutter analysis of periodically supported curved panels
Inuence of non-linear forces on beam behaviour in utter conditions
A general linear mathematical model of power ow analysis and control for integrated structure-control systems
Stochastic control of exible beam in random utter
On the eigencharacteristics of multi-step rods carrying a tip mass subjected to
non-homogeneous external viscous damping
Free vibration of completely free coupled orthotropic rectangular plates
Environmental vibration assessment and its applications in accelerated tests for
medical devices
267(2) 2003
Abu-Hilal M.
Lin CY. Chen LW.
Zhong WX. Williams FW. Leung AYT.
Moorhouse AT.
Li L. Qu LS.
Pany C. Parthan S.
Tizzi S.
Xiong YP. Xing JT. Price WG.
Heo H. Cho YH. Kim DJ.
Gurgoze M. Erol H.
Shaee A. Alizadeh Y. Redekop D.
Wu JS. Zhang RRC. Wu QM. Stevens KK.
385
387
397
407
419
431
439
447
469
485
497
509
523
537
549
565
575
591
605
621
637
651
663
675
689
701
709
721
739
Seventh international workshop on railway noise, 2001
Eurailnoise: a study of european priorities and strategies for railway noise abatement
The new policy of the european commission for the abatement of railway noise
Noise-impact estimates per fta and apta criteria
Environmental integration of measures to reduce railway noise in the brussels
capital region
The stairrs project, work package 1: a cost-eectiveness analysis of railway noise
reduction on a european scale
How the money machine may help to reduce railway noise in europe
Identication, modelling and reduction potential of railway noise sources: a critical survey
Experimental analysis of wheel noise emission as a function of the contact point
location
On the impact noise generation due to a wheel passing over rail joints
Squeal noise of rail-bound vehicles inuenced by lateral contact position
Extended validation of a theoretical model for railway rolling noise using novel
wheel and track designs
The inuence of the contact zone on the excitation of wheel/rail noise
Numerical prediction of rail roughness growth on tangent railway tracks
A full-scale test rig for railway rolling noise: simulation and measurement of
dynamic wheelset-track interaction
Eect of track stiness on vibration levels in railway tunnels
Prediction and measurements of vibrations from a railway track lying on a peaty
ground
A dynamic model for an asymmetrical vehicle/track system
Modelling of soil vibrations from railway tunnels
A comparison of a theoretical model for quasi-statically and dynamically induced
environmental vibration from trains with measurements
Impact of sound and vibration of the north-south high-speed railway connection
through the city of antwerp belgium
Potential low frequency ground vibration (< 6.3 hz) impacts from underground lrt
operations
Street-running lrt may not aect a neighbour's sleep
Train noise reduction scenarios for compliance with future noise legislation
Recent developments in noise research at deutsche bahn (noise assessment, noise
source localization and specially monitored track)
Application of metarail railway noise measurement methodology: comparison of
three track systems
Skirts and barriers for reduction of wayside noise from railway vehicles - an experimental investigation with application to the br185 locomotive
A double tuned rail damper - increased damping at the two rst pinned-pinned
frequencies
Evaluation of wheel dampers on an intercity train
267(3) 2003
Hanson CE.
Kalivoda M. Danneskiold-Samsoe U. Kruger
F. Barsikow B.
Lundstrom A. Jacker-Cuppers M. Hubner P.
Staiano MA.
Van Doninck N. Schillemans L.
Oertli J.
de Vos P.
Talotte C. Gautier PE. Thompson DJ. Hanson
C.
Bracciali A. Piccioli F.
Wu TX. Thompson DJ.
de Beer FG. Janssens MHA. Kooijman PP.
Jones CJC. Thompson DJ.
Thompson DJ.
Nielsen JCO.
Hartung CF. Vernersson T.
Cox SJ. Wang A.
Picoux B. Rotinat R. Regoin JP. Le Houedec
D.
Hou K. Kalousek J. Dong R.
Gardien W. Stuit HG.
Sheng X. Jones CJC. Thompson DJ.
Schillemans L.
Wolf S.
Sarkar SK. Wang JN.
Leth S.
Schulte-Werning B. Jager K. Strube R. Willenbrink L.
Kalivoda M. Kudrna M. Presle G.
Frid A.
Maes J. Sol H.
Farm J.
749
761
A reduced-scale railway noise barrier's insertion loss and absorption coeÆcients:
comparison of eld measurements and predictions
Local control of noise and vibration with keltrack (tm) friction modier and
protector (tm) trackside application: an integrated solution
Eadie DT. Santoro M. Powell W.
773
787
809
851
867
879
893
913
933
955
961
967
Structural modal excitation using travelling impulses - force frequency shifting
An eÆcient method for switching branches of period-doubling bifurcations of
strongly non-linear autonomous oscillators with many degrees of freedom
Vibration sensitive behaviour of a connecting angle. case of coupled beams and
plates
Active vibration control for structural-acoustic coupling system of a 3-d vehicle
cabin model
Eigenfrequency spacing analysis and eigenmode breakdown for semi-stadium-type
2-d elds
Passive vibration control of a satellite boom structure by geometric optimization
using genetic algorithm
Periodic solution nder for an impact oscillator with a drift
Combined parametrical transverse and in-plane harmonic response of an inclined
stretched string
Vibration and stability of cracked hollow-sectional beams
Sensitivity of the eigenvalues of beams to the change of element correction factors
Shear eects in aeroacoustic predictions
Transverse vibrations of simply supported rectangular plates with two rectangular
cutouts
267(4) 2003
Koss LL.
Chung KW. Chan CL. Xu J.
Ouisse M. Guyader JL.
Song CK. Hwang JK. Lee JM. Hedrick JK.
Fujisaka Y. Tohyama M.
Moshre-Torbati M. Keane AJ. Elliott SJ.
Brennan MJ. Rogers E.
Pavlovskaia E. Wiercigroch M.
Caswita. Van Der Burgh AHP.
Zheng DY. Fan SC.
Lee GM.
Singer BA. Lockard DP.
Avalos DR. Laura PAA.
979
1007
1029
1047
1065
1085
1107
1127
1143
1157
1169
1175
1184
Active sound scatterers based on the jmc method
On the transversal vibrations of a conveyor belt with a low and time-varying
velocity. part ii: the beam-like case
Fully coupled vibrations of actively controlled drillstrings
Interaction of eigenvalues in multi-parameter problems
A method to determine dynamic loads on spur gear teeth and on bearings
Dynamic behaviour of structures in large frequency range by continuous element
methods
An analytical model to predict the response of uid-lled shells to impact - a
model for blunt head impacts
Resonance characteristics of high-speed trains passing simply supported bridges
Determination of the steady state response of viscoelastically point-supported
rectangular specially orthotropic plates by an energy-based nite dierence
method
Non-parametric identication of non-linear oscillating systems
Asymptotical behaviour of a system with damping and high power-form nonlinearity
A re-examination of geometric compatibility and shape function admissibility in
rayleigh-ritz based substructure synthesis
Controlling chaotic instability of cutting process by high-frequency excitation: a
numerical investigation
267(5) 2003
Uosukainen S.
Suweken G. Van Horssen WT.
Christoforou AP. Yigit AS.
Seyranian AP. Mailybaev AA.
Vedmar L. Andersson A.
Casimir JB. Vinh T. Duforet C.
Young PG.
Ju SH. Lin HT.
Kocaturk T. Altintas GB.
Peifer M. Timmer J. Voss HU.
Andrianov IV. Awrejcewicz J.
Johnson DA.
Chatterjee S. Singha TK.
1
15
33
49
71
85
103
115
In-plane antisymmetric response of cables through bifurcation under symmetric
sinusoidally time-varying load
Dynamic analysis of an optical ber coupler in telecommunications
Non-stationary processes of rotor/bearing system in bifurcations
System mode approach for analysis of horizontal vibration of 3-d two-link exible
manipulators
The eect of cable loosening on seismic response of a prestressed concrete cablestayed bridge
Formulation and validation of a ritz-based analytical model of high-frequency
periodically layered isolators in compression
Experimental analysis of a high-speed railway bridge under thalys trains
Dynamics modelling of beams with shunted piezoelectric elements
51
Busch TA. Nugent RE.
268(1) 2003
Takahashi K. Wu Q. Nakamura S.
Cheng G. Zu JW.
Ding Q. Leung AYT.
Cheong J. Youm Y.
Wu Q. Takahashi K. Nakamura S.
Sze JT. Smith EC. Lesieutre GA.
Xia H. De Roeck G. Zhang N. Maeck J.
Park CH.
52
131
149
167
177
201
209
Dispersion of waves and characteristic wave surfaces in functionally graded piezoelectric plates
Dynamic stability of spinning pretwisted beams subjected to axial random forces
Determination of uncertainty in environmental noise measurements by bootstrap
method
An improved criterion of gaussian equivalent linearization for analysis of nonlinear stochastic systems
A discrete-time, optimal, active vibration absorber
On the periodic solutions of a generalized non-linear van der pol oscillator
Liu GR. Dai KY. Han X. Ohyoshi T.
Young TH. Gau CY.
Farrelly FA. Brambilla G.
Anh ND. Hung LX.
Bhatta P. Sinha A.
Waluya SB. van Horssen WT.
217
Transient response of a hydraulic engine mount
249
Conditions for the excitation of interface waves in a thin unconsolidated sediment
layer
Importance sampling for randomly excited dynamical systems
A stochastic approach to cable dynamics with moving rivulets
An actuator for the n=2 circumferential mode of a pipe
On the inuence of lateral vibrations of supports for an axially moving string
Non-linear vibrations of a simple-simple beam with a non-ideal support in between
Collision dynamics of two adjacent oscillators
Energy dissipation prediction in a line of colliding oscillators
Time-domain numerical computation of noise reduction by diraction and nite
impedance of barriers
On-line non-destructive evaluation and control of wood-based panels by vibration
analysis
Free vibration of an innite magneto-electro-elastic cylinder
Letter to the editor
Letter to the editor - author's reply
269
291
305
323
331
343
361
385
403
413
427
428
268(2) 2003
Adiguna H. Tiwari M. Singh R. Tseng HE.
Hrovat D.
Ainslie MA.
Macke M. Bucher C.
Cao DQ. Tucker RW. Wang C.
Variyart W. Brennan MJ.
van Horssen WT.
Pakdemirli M. Boyaci H.
Pinnington RJ.
Pinnington RJ.
Lim CW. Cheong C. Shin SR. Lee S.
Bos F. Casagrande SB.
Buchanan GR.
Pujara KK.
Kim JH.
429
465
485
503
525
543
555
581
601
617
627
632
635
A spectral nite element for analysis of wave propagation in uniform composite
tubes
Dynamic analysis of solid propellant grains subjected to ignition pressurization
loading
Dynamic studies of railtrack sleepers in a track structure system
Non-linear dual-axis biodynamic response to vertical whole-body vibration
Estimation of power transmission to a exible receiver from a sti source using a
power mode approach
Three-to-one internal resonances in a general cubic non-linear continuous system
Application of generalized complex modes to the calculation of the forced response
of three-dimensional poroelastic materials
An improved model of er uids in squeeze-ow through model updating of the
estimated yield stress
Vibration reduction in piecewise bi-coupled periodic structures
Inuence of fastener placement on vibration-induced loosening
Condition of chaotic vibration in a centrifugal governor
Comments on "chaos and chaos synchronization of a symmetric gyro with linearplus-cubic damping"
Comments on "chaos and chaos synchronization of a symmetric gyro with linearplus-cubic damping" - author's reply
268(3) 2003
Mahapatra DR. Gopalakrishnan S.
Chyuan SW.
Kumaran G. Menon D. Nair KK.
Nawayseh N. GriÆn MJ.
Ji L. Mace BR. Pinnington RJ.
Pakdemirli M. Ozkaya E.
Dazel O. Sgard F. Lamarque CH.
El Wahed AK. Sproston JL. Stanway R.
Williams EW.
Romeo F. Luongo A.
Pai NG. Hess DP.
Zhu Q. Ishitobi M. Nagano S.
Van Dooren R.
Chen HK.
Journal of Strain Analysis for Engineering Design
377
395
405
419
429
443
Quadrilateral nite elements for multilayer sandwich plates
Evaluation of plastic limit load of piping branch junctions subjected to out-ofplane moment loadings
A review of the general theory of thermoelastic stress analysis [review]
The eect of high compressive loading on residual stresses and fatigue crack
growth at cold expanded holes
Stress analysis of v-notches with and without cracks, with application to foreign
object damage
Fatigue design in the presence of stress concentrations
38(5) 2003
Nayak AK. Moy SSJ. Shenoi RA.
Xuan FZ. Li PN. Tu ST.
Pitarresi G. Patterson EA.
Stefanescu D. Dutta M. Wang DQ. Edwards
L. Fitzpatrick ME.
Nowell D. Dini D. Duo P.
Susmel L. Taylor D.
453
459
469
483
Delamination modelling of a curved composite beam subjected to an opening
bending moment
X-ray residual stress analysis of cylindrically curved surfaces - estimation of circumferential distributions of residual stresses
Experimental investigation of corner-supported architectural glazing under pulse
pressure loading
Strain-concentration factor of plane-strain notched rectangular bars under pure
bending
Oguri T. Murata K. Sato Y.
Goodfellow AM. Schleyer GK.
Majima T. Ishizaka T.
Journal of Vibration & Acoustics
249
252
257
267
274
282
290
299
307
317
324
328
335
343
351
359
365
374
384
389
398
405
407
Spectrum of high-frequency acoustic noise in inviscid liquid-linear approximation
for spherical waves
Theory on pitch noise and its application
Investigation of the sound transmission into an advanced grid-stiened structure
Optimal stiener design for interior sound reduction using a topology optimization based approach
New evaluation method on gear dynamics using continuous and discrete wavelet
transforms
A stochastic model for simulation and diagnostics of rolling element bearings with
localized faults
Nonlinear dynamic analysis of a rotor shaft system with viscoelastically supported
bearings
Nonlinear parameter estimation in rotor-bearing system using volterra series and
method of harmonic probing
Eect of thrust magnetic bearing on stability and bifurcation of a exible rotor
active magnetic bearing system
Torsional vibration analysis of complicated multi-branched shafting systems by
modal synthesis method
Study on the dynamics of a rotor in a maneuvering aircraft
Control of self-excited vibration of a rotor system with active gas bearings
Vibration of ex circuits in hard disk drives
Vibration control of a traveling suspended system using wave absorbing control
Dynamic stiness formulation and its application for a combined beam and a two
degree-of-freedom system
Eect of damping on asymmetric systems
The eect of actuator and sensor placement on the active control of rotor unbalance
Robust control of a 2d acoustic enclosure
Active vibration suppression with time delayed feedback
Bayesian model screening for the identication of nonlinear mechanical structures
Closed-form exact solution to h-innity optimization of dynamic vibration absorbers (application to dierent transfer functions and damping systems)
Determining stability boundaries using gyroscopic eigenfunctions
Rotor isolation for vibration and noise reduction
125(3) 2003
Likhterov L. Berman A.
Nakajima Y.
Vipperman JS. Li DY. Avdeev I. Lane SA.
Luo J. Gea HC.
Ohue Y. Yoshida A.
Antoni J. Randall RB.
Shabaneh N. Zu JW.
Chatterjee A. Vyas NS.
Ho YS. Liu H. Yu L.
Zou CP. Chen DS. Hua HX.
Lin FS. Meng G.
Qiu J. Tani J. Kwon T.
Wickert JA.
Saigo M. Tani K. Usui H.
Banerjee JR.
Gallina P.
Johnson ME. Nascimento LP. Kasarda M.
Fuller CR.
Pota HR. Petersen IR. Kelkar AG.
Sipahi R. Olgac N.
Kerschen G. Golinval JC. Hemez FM.
Asami T. Nishihara O.
Renshaw AA.
Brungart TA. Riggs ET.
Journal of Vibration & Acoustics
413
417
423
427
434
441
445
448
455
462
471
477
Foreword - special issue: the contributions of jorgen w. lund to rotor dynamics
Instability boundary for rotor-hydrodynamic bearing systems, part 1: jecott
rotor with external damping
Instability boundary for rotor-hydrodynamic bearing systems, part 2: rotor with
external exible damped support
Three-dimensional cfd rotordynamic analysis of gas labyrinth seals
Jorgen lund: a perspective on his contributions to modern rotor bearing dynamics
The scientic work of jorgen lund and a personal assessment of its signicance
The multiple contributions of jorgen lund's ph.d. dissertation, self-excited, stationary whirl orbits of a journal in sleeve bearings, rpi, 1966, engineering mechanics
Lund's tilting pad journal bearing pad assembly method
Lund's elliptic orbit forced response analysis: the keystone of modern rotating
machinery analysis
Lund's contribution to rotor stability: the indispensable and fundamental basis
of modern compressor design
Application of lund's stability analysis program in design of modern turbomachinery
Some unusual cases of rotor instability
53
Wang W. Shenoi RA.
125(4) 2003
Kirk RG. Bergman LA.
Guo ZL. Kirk RG.
Guo ZL. Kirk RG.
Moore JJ.
Smalley AJ.
Rieger NF.
Childs DW. Jordan LT.
Nicholas JC.
Kirk RG.
Gunter EJ.
De Choudhury P.
Olsson KO.
54
482
489
495
500
Jorgen w. lund: theories versus tests, part 1: balancing and response of exible
rotors
Jorgen w. lund: theories versus tests, part 2: damped critical speeds of rotors
and uid lm bearing characteristics
Inertia eects in squeeze-lm damper bearings generated by circumferential oil
supply groove
Usage of the lund rotordynamic programs in the analysis of centrifugal compressors
Tonnesen J.
Tonnesen J.
Lund JW. Myllerup CM. Hartmann H.
Memmott EA.
Journal of Vibration & Control
1023
1041
1057
1083
1093
A self-organizing fuzzy controller for an active suspension system
Design of an actuated exible arm for improved vibration properties
Wave propagation in periodic stiened shells: spectral nite element modeling
and experiments
Dynamic response of a supported beam to oscillatory moving masses
Vibration control of the platform system with hydraulic supports
9(9) 2003
Huang SJ. Lin WC.
Moallem M. Patel RV. Khorasani K.
Solaroli G. Gu Z. Baz A. Ruzzene M.
Mackertich S.
Tang YG. Ding Q. Chen YS.
1103
1121
1141
1159
1189
1201
Machine condition monitoring using signal classication techniques
Optimization of engine mount characteristics using experimental/numerical analysis
Convergence analysis of an inverse exible manipulator model algorithm
Modeling of a beam and a rotor with an edge crack using dissimilar elements
Structure-borne power transmission in thin naturally orthotropic plates: general
case
Seismic response of base-isolated liquid storage tanks
9(10) 2003
Pan MC. Sas P. Van Brussel H.
Foumani MS. Khajepour A. Durali M.
Bigras P. Saad M. O'Shea J.
Nandi A. Neogy S.
Mandal NK. Abd Rahman R. Leong MS.
Shrimali MK. Jangid RS.
1221
1231
1249
1265
1285
1303
An exact solution for the natural frequencies of exible beams undergoing overall
motions
On the weakly damped vibrations of a string attached to a spring mass dashpot
system
The semi-empirical and empirical models for predicting sound absorption coeÆcients for a novel porous laminated composite material
Propagation of s-h waves in laminated composites: a gradient elasticity approach
Adaptive control of structural acoustics using intelligent structures with embedded piezoelectric patches
Vibration of elastically coupled cantilever beams using greens's functions
9(11) 2003
Nayfeh AH. Emam SA. Preidikman S. Mook
DT.
Darmawijoyo. Van Horssen WT.
Yang TL. Chen RS.
Altan BS. Miskioglu I. Vilmann CR.
Ma K. Melcher J.
Mohamad AS. Al-Jawi AAN.
JSME International Journal Series BFluids & Thermal Engineering
349
356
366
377
385
392
399
408
Numerical analysis on a ow eld of liquid metals under a magnetic eld, using
a spectral nite dierence scheme
Eects of the tip clearance on vortical ow and its relation to noise in an axial
ow fan
Comparison between triangular cylinder and screen near-wakes in the orthogonal
wavelet representation
Eects of sidewall temperature on the ow pattern and the bifurcation to chaos
of rayleigh-benard cells in an enclosure (aspect ratio of enclosure: 6 : 4 : 1)
Analyses on the performance and interaction between the impeller and casing in
a small-size turbo-compressor
Performance comparison of single-phase forced-oscillating-ow heat-pipes
Allowable repetition frequency of pulse heating in microactuators using rapid
boiling (eects of heater size and substrate material)
Persistence of laminar amelet structure under highly turbulent combustion
46(3) 2003
Im K. Mochimaru Y.
Jang CM. Fukano T. Furukawa M.
Li H. Zhou Y.
Koizumi H.
Kim YJ. Kim DW.
Nishio S. Tanaka H.
Okuyama K. Kim JH. Iida Y.
Yamamoto K. Nishizawa Y. Onuma Y.
416
425
434
451
The eects of ame stretch on outwardly propagating ames
Time-resolved analysis of turbulent mixing ow characteristics of intermittent
multi-hole diesel spray using 2-d pdpa
Impingement heat transfer of reciprocating jet array
The eect of intake boost pressure on mk (modulated kinetics) combustion
Tanoue K. Shimada F. Hamatake T.
Lee JK. Kang SJ. Rho B.
Su LM. Chang SW. Chiou SF.
Lee TW. Reitz RD.
JSME International Journal Series CMechanical Systems Machine Elements & Manufacturing
797
798
807
813
819
828
835
841
848
854
861
867
873
881
891
900
908
916
923
931
938
946
953
960
967
973
982
991
1000
1010
1017
1026
1035
1042
1051
1062
Special issue on advances in motion and vibration control technology - foreword
Inertial vibration damping of a exible base manipulator
Vibration isolation system using negative stiness
Compliance cancellation for a magnetic guide using a smart multitasking active
vibration control algorithm
Vibration servo control design for mechanical resonant modes of a hard-disk-drive
actuator
Application of two-degree-of-freedom control to multi-axis electrodynamic shaking system using-synthesis and adaptive lter
Multi-mode control for an active isolation system with an elastic table
Independent modal control system design method via modal matrix estimation
based on subspace method
Performance of an active mass driver system on a ve storey benchmark model
Development of active-damping bridges and its application to triple high-rise
buildings
Detection of component failures for smart structure control systems
Active progressive wave control of a simply supported plate
Control of uid-structure-sound interaction mechanisms by means of synthetic
jets
Development and control of mine detection robot comet-ii and comet-iii
Robust control of multiple discrete frequency vibration components in rotor magnetic bearing systems
High performance capacitive position sensing device for compact active magnetic
bearing spindles
Vibration control for an implantable blood pump on a bearingless slice motor
Prole and surface measurement tool for high aspect-ratio microstructures
Development of power assisting suit - (miniaturization of supply system to realize
wearable suit)
Control of an omni-directional power-assisted cart
Lqr controller for toroidal continuously variable transmission in reverse motion
Intelligent failure-proof control using cubic neural network - (application to a
control problem of swung up and stabilized double pendulum)
Design method of gain-scheduled control system considering actuator saturation
- (experimental verication for cart and inverted pendulum system)
A design method of sliding mode controller for servo-systems subject to actuator
saturation
Adaptive force control for unknown environment using sliding mode controller
with variable hyperplane
Adaptive impact shot control by pendulum-like juggling system
A study on the propulsive mechanism of a double jointed sh robot utilizing
self-excitation control
Design of composite hip prostheses considering the long-term behavior of the
femur
Structural design optimization for reducing sound radiation from a vibrating plate
using a genetic algorithm
Verication of the mechanism of the head-positioning error caused by disk utter
and slider supporting structure for reducing head-positioning error
The minimization method of measuring errors for balancing asymmetrical rotors
Accuracy of fault detection in real rotating machinery using model based diagnostic techniques
Fault diagnosis system for rotary machine based on fuzzy neural networks
Research on fuzzy i-pd preview control for nonlinear system
Adaptive fuzzy control of electrostrictive polymer actuator for the endoscopic
microcapsule
Nanoaccuracy position control of a pneumatic cylinder driven table
55
46(3) 2003
Mizuno T. Suda Y.
George LE. Book WJ.
Mizuno T. Toumiya T. Takasaki M.
Ruskowski M. Reicke L. Popp K.
Atsumi T. Arisaka T. Shimizu T. Yamaguchi
T.
Uchiyama Y. Fujita M.
Shono T. Nagasaka N. Nishi M. Takagi Y.
Watanabe T. Seto K.
Takanashi H. Adachi S. Wakui S.
Samali B. Al-Dawod M. Li JC.
Asano M. Yamano Y. Yoshie K. Koike Y. Nakagawa K. Murata T.
Okubo H.
Sakano A. Tanaka N.
Ziada S.
Nonami K. Huang QJ. Komizo D. Fukao Y.
Asai Y. Shiraishi Y. Fujimoto M. Ikedo Y.
Cole MOT. Keogh PS. Burrows CR.
Zoethout J. Boletis A. Bleuler H.
Huettner C.
Pourciel JB. Jalabert L. Masuzawa T.
Yamamoto K. Ishii M. Hyodo K. Yoshimitsu
T. Matsuo T.
Maeda H. Fujiwara S. Kitano H. Yamashita H.
Fukunaga H.
Mensler M. Kawabe T. Joe S.
Takahashi M. Yoshida K.
Itagaki N. Nishimura H. Takagi K.
Yokoyama M. Tohta Y. Saitoh K.
Iwasaki M. Tsujiuchi N. Koizumi T.
Suzuki S. Furuta K. Shiratori S.
Nakashima M. Ohgishi N. Ono K.
Lim JW. Jeong JY. Ha SK.
Kaneda S. Yu Q. Shiratori M. Motoyama K.
Imai S.
Kang Y. Chiang CP. Wang CC. Lin TW. Chui
YJ.
Bachschmid N. Pennacchi P.
Zhang S. Asakura T. Xu XL. Xu BJ.
Wang D. Aida K.
Hwang K. Kim H.
Pai KR. Shih MC.
56
1068
1075
1084
1091
1100
1108
1112
1121
1130
1142
1151
1160
1171
1178
Two-step design method for robust repetitive control systems
A study on robot-human system with consideration of individual preferences (1st
report, construction of a planar-two-degrees-of-freedom robot system for handing
over motion based on image processing)
A lagrangian formulation in terms of quasi-coordinates for the inverse dynamics
of the general 6-6 stewart platform manipulator
Robust force control of a 6-link electro-hydraulic manipulator
Tracking and almost disturbance decoupling for nonlinear systems with uncertainties
Lmi stability criterion for uncertain systems with multiple time delays
An analytic algorithm for simulation of stick-slip friction
Sequential fuzzy diagnosis for plant machinery
Analysis of exible insertion assembly of polygonal pegs
Constructing the boundaries of swept volumes for screw motions
Durability of cutting performance of a knife and micro-structural change of a
knife edge
Fundamental research on hobbing of austempered ductile iron gear - (inuence
of graphite particle on machinability)
Bending load capacity enhancement using an asymmetric tooth prole - (1st
report, inuences of pressure angle on tooth root stress and bending stiness)
Vibration and sound-radiation analysis for designing a low-noise gearbox with a
multi-stage helical gear system
Yamada K. Arakawa T. Hoshi H. Okuyama T.
Jindai M. Shibata S. Yamamoto T. Shimizu A.
Chen CT.
Ahn K. Yokota S.
Chen CC. Chien TL. Wei CL.
Lien CH. Chen JD. Yu KW.
Wu RH. Tung PC.
Chen P. Toyota T.
Cheng CC. Chen GS.
Kim JJ.
Takekoshi K. Gotoh M.
Matsuoka H. Tsuda Y. Ono H.
Deng G. Nakanishi T. Inoue K.
Tanaka E. Houjoh H. Mutoh D. Motoshiromizu H. Ohno K. Tanaka N.
Meccanica
39
611
613
Professor solari is the rst iawe president
Untitled - preface
An overview on non-ideal vibrations
623
643
A trigger of coupled singularities
On the development of negative pressure in oil lm and the characteristics of
journal bearing
Stabilization of parametric vibrations of a nonlinear continuous system
Transversal dynamics of one-dimensional chain on nonlinear asymmetric substrate
Designing a linear structure with a local nonlinear attachment for enhanced energy pumping
Dynamics investigation of three coupled rods with a horizontal barrier
Holomorphic ows on simply connected regions have no limit cycles
Frictional phenomena in dynamical system with two-frequency excitation
Note on chaos in three degree of freedom dynamical system with double pendulum
Vibration problems in selected torsional mechanical systems
The application of intelligent technology on a multi-variable dynamical system
Inuence of tribological processes on a chaotic motion of a bush in a cylinder-bush
system
Active stabilization of a rotating shaft transmitting static torque
659
669
677
687
699
711
719
731
739
749
763
38(6) 2003
Rega G.
Awrejcewicz J.
Balthazar JM. Mook DT. Weber HI. Brasil
RMLRF. Fenili A. Belato D. Felix JLP.
Hedrih K.
Someya T.
Tylikowski A.
Manevitch LI. Pervouchine VP.
Vakakis AF.
Awrejcewicz J. Kudra G. Lamarque CH.
Broughan KA.
Bogacz R. Ryczek B.
Sado D. Gajos K.
Pielorz A.
Naidoo P.
Awrejcewicz J. Pyryev Y.
Przybylowicz PM.
Meccanica
1
17
31
47
63
77
81
The modal analysis of a motorcycle in straight running and on a curve
A numerical solution of the inverse problem in classical celestial mechanics, with
application to mercury's motion
Modal model identication with unknown nonstationary base motion
On gear modelling in multistage rotary vane engines
Investigation of the dynamic behavior of a griÆth crack in a piezoelectric material
strip subjected to the harmonic elastic anti-plane shear waves by use of the nonlocal theory
Consequences of 'changes' of material metric in simple bodies
Modelling of cyclic mechanical behaviour of 316sph steel by a non-linear relaxations approach
39(1) 2004
Cossalter V. Lot R. Maggio F.
Arminjon M.
Capecchi D. De Angelis M. Sepe V.
Librovich B. Tucker RW. Wang C.
Zhou ZG. Sun YG. Wang B.
Mariano PM.
Ayadi Z. Martin B. Leclercq S. Nivoit M. Cunat C.
Meccanica
97
105
Some remarks on the rule of the middle third
Nonlinear analysis of experimental time series of a straight turning process
39(2) 2004
Buratti G.
Litak G. Rusinek R. Teter A.
113
125
139
147
159
175
181
Mixed boundary value problem in a non-homogeneous medium under steady distribution of temperature
Thermal stresses in plane strain of porous elastic solids
Exponential stability of solutions of swelling porous elastic soils
On the optimal shape of a compressed rotating rod
On the logical status of the virtual work law
Flow of an electrorheological uid in small clearances
Possible ball-like formations of the beltrami ow eld
Rokne J. Singh BM. Dhaliwal RS. Vrbik J.
Iesan D. Nappa L.
Quintanilla R.
Atanackovic TM.
Capecchi D.
Capriz G. Azzoni VD.
Chu RKH.
Mechanics of Advanced Materials & Structures
285
335
Progressive damage simulation of thick viscoelastic laminate with homogenization
technique
Buckling of laminated composite plates by a new element based on higher order
shear deformation theory
Modeling of three-phase brous composite using the asymptotic homogenization
method
Identication of elastic properties of composite laminates
353
Size scales for accurate homogenization in the presence of severe stress gradients
303
319
10(4) 2003
Noh JH. Whitcomb JD.
Chakrabarti A. Sheikh AH.
Guinovart-Diaz R. Rodriguez-Ramos R.
Bravo-Castillero J. Sabina FJ.
Rikards R. Abramovich H. Green T. Auzins J.
Chate A.
Yuan FG. Pagano NJ.
943
955
969
987
1003
Screw dislocation interacting with imperfect interface
A continuum model for granular materials taking into account the no-tension
eect
An experimental study of the superelastic eect in a shape-memory nitinol alloy
under biaxial loading
Experiments and modelling of the compressive behaviour of two sic ceramics
Thermal failure mechanism and failure threshold of sic particle reinforced metal
matrix composites induced by laser beam
35(10) 2003
Fan H. Wang GF.
Nguyen VH. Duhamel D. Nedjar B.
McNaney JM. Imbeni V. Jung Y. Papadopoulos P. Ritchie RO.
Forquin P. Denoual C. Cottenot CE. Hild F.
Zhou YC. Long SG. Liu YW.
1023
1049
1059
1077
1089
Thermomechanical response of dh-36 structural steel over a wide range of strain
rates and temperatures
Number of grains necessary to homogenize elastic materials with cubic symmetry
Analysis of an elliptical crack parallel to a bimaterial interface under tension
Steady state crack propagation in a piezoelectric layer bonded between two orthotropic layers
Inverse analysis method to nd local constitutive relations
1107
1127
1139
1149
1161
1177
Supercritical matrix microcracking in brittle matrix plain weave composites under
uniaxial tension
Numerical and experimental analysis of superplastic-like uniaxial tensile necking
of coarse-grained ly-12
Modeling of deformation behavior and strain-induced crystallization in
poly(ethylene terephthalate) above the glass transition temperature
Molecular reorganization in wood
Metal foams as compact high performance heat exchangers
Mixed-mode j-integral formulation and implementation using graded elements for
fracture analysis of nonhomogeneous orthotropic materials (vol 35, pg 107, 2003)
Mechanics of Structures & Machines
0
297
315
Special issue on virtual nonlinear multibody systems - preface
Simulation of railway vehicles: necessities and applications
Railway vehicle dynamics: some aspects of wheel-rail contact modeling and optimization of running gears
57
35(11) 2003
Nemat-Nasser S. Guo WG.
Nygards M.
Noda NA. Ohzono R. Chen MC.
Kwon SM. Lee KY.
Hori M.
35(12) 2003
Haan SI. Charalambides PG. Kuhn JL. Patterson MCL.
Wu YQ. Zhang KS.
Ahzi S. Makradi A. Gregory RV. Edie DD.
Karenlampi PP. Tynjala P. Strom P.
Boomsma K. Poulikakos D. Zwick F.
Kim JH. Paulino GH.
31(3) 2003
Zahariev E. Bestle D.
Schupp G.
Kovalev R. Yazykov VN. Mikhalchenko GS.
Pogorelov DY.
58
335
357
381
413
433
Solving nonconvex problems of multibody dynamics with joints, contact, and
small friction by successive convex relaxation
Multibody simulation model of human walking
Solution of redundant muscle forces in human locomotion with multibody dynamics and optimization tools
State-space generalized predictive control for redundant parallel robots
Contact simulation for many particles considering adhesion
Anitescu M. Hart GD.
Wojtyra M.
Silva MPT. Ambrosio JAC.
Belda K. Bohm J. Valasek M.
Muth B. Eberhard P. Luding S.
Mechanics Research Communications
513
519
531
539
547
557
567
573
581
589
595
615
623
629
639
651
663
Thermoelastic coupling eect on a micro-machined beam resonator
Stress state of compound polygonal plate
Validation of the rayleigh-ritz method for the postbuckling analysis of rectangular
plates with application to delamination growth
Symmetry group classication for one-dimensional elastodynamics problems in
nonlocal elasticity
Screw dislocation interacting with twin interfacial edge cracks between two
bonded dissimilar piezoelectric strips
Moving antiplane shear crack in hexagonal piezoelectric crystals
Unied expressions of all dierential variational principles
On the uniaxial compression behavior of regular shaped cellular metals
Sudden tensile loading of a rubberlike bar
Two-dimensional time-harmonic dynamic green's functions in transversely
isotropic piezoelectric solids
The viscoelastic behavior of melts of virgin and recycled polycarbonate reinforced
with short glass bers
Transient ow rate behaviour in an external natural convection boundary layer
Stability of ows in a peristaltic transport
Thermal slip boundary conditions in vibrational nonequilibrium ows
A study of emulsion expansion by a boundary integral method
Drag forces of interacting spheres in power-law uids
Strain-free points near a doughnut-like inclusion with purely dilatational eigenstrains
30(6) 2003
Guo FL. Rogerson GA.
Kuliyev S.
Jane KC. Liao HW. Hong W.
Ozer T.
Wu XF. Dzenis YA. Fan TY.
Tupholme GE.
Huang YC.
Ochsner A. Lamprecht K.
Knowles JK.
Wang X. Zhong Z.
Drozdov AD. Al-Mulla A. Gupta RK.
Polidori G. Popa C. Mai TH.
Chu ZKH.
Meolans JG.
Cunha FR. Loewenberg M.
Zhu C. Lam K. Chu HH. Tang XD. Liu GL.
Onaka S.
Medical Engineering & Physics
719
Determination of the trabecular bone direction from digitised radiographs
731
739
747
Stress distribution in the layered wall of the rat oesophagus
Myoelectric signal compression using zero-trees of wavelet coeÆcients
A novel liner locking mechanism enhances retention stability
755
Dynamic graciloplasty for urinary incontinence: the potential for sequential
closed-loop stimulation
Hand rim conguration: eects on physical strain and technique in unimpaired
subjects?
Eects of sterilization on the tekscan digital pressure sensor
765
775
781
789
795
Comparison of in situ and in vitro ct scan-based nite element model predictions
of proximal femoral fracture load
Intramedullary nails: some design features of the distal end
Dynamic stiness and damping of porcine muscle specimens
25(9) 2003
Defossez H. Hall RM. Walker PG. Wroblewski
BM. Siney PD. Purbach B.
Liao DH. Fan YH. Zeng YJ. Gregersen H.
Norris JA. Englehart KB. Lovely DF.
Macdonald W. Aspenberg A. Jacobsson CM.
Carlsson LV.
Zonnevijlle EDH. Perez-Abadia G. Stremel
RW. Maldonado CJ. Kon M. Barker JH.
van der Woude LHV. Formanoy M. de Groot
S.
Agins HJ. Harder VS. Lautenschlager EP. Kudrna JC.
Keyak JH. Falkinstein Y.
Wang CJ. Brown CJ. Yettram AL. Procter P.
Aimedieu P. Mitton D. Faure JP. Denninger
L. Lavaste F.
Nonlinear Dynamics
105
129
155
165
189
209
A geometrical approach to dynamic strain localization in planar motion
Large amplitude three-dimensional free vibrations of inclined sagged elastic cables
Nonlinear dynamics of shallow spherical caps subjected to peripheral loading
The vector parameterization of motion
Optimal bounded control of rst-passage failure of quasi-integrable hamiltonian
systems with wide-band random excitation
Stochastic stabilization of quasi-partially integrable hamiltonian systems by using
lyapunov exponent
33(2) 2003
Sorensen NJ.
Srinil N. Rega G. Chucheepsakul S.
Odeh G.
Bauchau OA. Choi JY.
Zhu WQ. Deng ML. Huang ZL.
Zhu WQ. Huang ZL.
59
Nonlinear Dynamics
225
253
On approximations of rst integrals for a strongly nonlinear forced oscillator
Dynamics analysis of ground contact pressure of english pointer dogs
267
Extension of the center manifold approach, using rational fractional approximants, applied to non-linear stability analysis
Dissipative waves in a relaxing gas exhibiting mixed nonlinearity
Fractional derivative viscoelasticity at large deformations
Nonlinear isolator dynamics at nite deformations: an eective hyperelastic, fractional derivative, generalized friction model
283
301
323
33(3) 2003
Waluya SB. Van Horssen WT.
Marghitu DB. Swaim SF. Rumph PF. Cojocaru D. Gillette RL. Scardino MS.
Sinou JJ. Thouverez F. Jezequel L.
Sharma VD. Madhumita G. Manickam SAV.
Adolfsson K. Enelund M.
Sjoberg M. Kari L.
Proceedings of the Royal Society of London Series AMathematical Physical & Engineering Sciences
2393
2627
Construction of three-dimensional stationary euler ows from pseudo-advected
vorticity equations
A mixed nite-element nite-dierence method for nonlinear uid-structure interaction dynamics. i. uid-rigid structure interaction
The hurwitz theorem for bessel functions and antibound states in spectral theory
On the equilibrium of shell membranes under normal loading. hidden integrability
Advantage of a quantum player over a classical one in 2x2 quantum games
Embedding formulae in diraction theory
Heat-transfer eects of coalescence of bubbles from various site distributions
On the sher-kpp equation with fast nonlinear diusion
Mass- and volume-specic views on thermodynamics for open systems
The analyticity of jacobian functions with respect to the parameter k
The eect of anisotropic surface energy on the rayleigh instability
Hyperasymptotic solutions of inhomogeneous linear dierential equations with a
singularity of rank one
Some three-dimensional problems related to dielectric breakdown and polycrystal
plasticity
Low-frequency acoustic waves in nematic elastomers
2643
Quantum condensation in superconductivity perceived in its space-time aspects
2399
2431
2449
2463
2475
2497
2529
2547
2569
2575
2599
2613
Proceedings of the Royal Society of London Series AMathematical Physical & Engineering Sciences
2663
2705
2731
2749
2771
2787
2807
2821
2847
2861
2885
2909
Lithospheric failure on venus
Computation of densities and uxes of nonlinear dierential-dierence equations
Structural investigation of si-al-c-o precursors and their pyrolysis products in
nitrogen
Acoustic wave propagation in buried iron water pipes
On an inconsistency in the derivation of the equations of elastohydrodynamic
lubrication
Elasticity and onset of frictional dissipation at a non-sliding multi-contact interface
The dilogarithm function for complex argument
Stochastic factorizations, sandwiched simplices and the topology of the space of
explanations
Packing of regular tetrahedral quartets of circles on a sphere
On the boundary-value problem for the korteweg-de vries equation
A study of the tensile properties of liquids in conned spaces using an atomic
force microscope
Quasi-modes of a weakly curved waveguide
Rheologica Acta
383
410
Negative wake in the uniform ow past a cylinder
Rheological properties of concentrated latex suspensions of poly(styrenebutadiene)
459(2038) 2003
Nishiyama T.
Xing JT. Price WG. Chen YG.
Brown BM. Eastham MSP.
Rogers C. Schief WK.
Flitney AP. Abbott D.
Craster RV. Shanin AV. Doubravsky EM.
Chen TL. Chung JN.
King JR. McCabe PM.
Kuhl E. Steinmann P.
Walker P.
Gurski KF. McFadden GB.
Howls CJ. Daalhuis ABO.
Garroni A. Kohn RV.
Fradkin LJ. Kamotski IV. Terentjev EM. Zakharov DD.
Masumi T.
459(2039) 2003
Fowler AC. O'Brien SBG.
Hickman MS. Hereman WA.
Li XD. Edirisinghe MJ.
Long R. Cawley P. Lowe M.
Rajagopal KR. Szeri AZ.
Bureau L. Caroli C. Baumberger T.
Maximon LC.
Mond D. Smith J. van Straten D.
Tarnai T. Fowler PW. Kabai S.
Hayashi N. Kaikina EI. Zavala JLG.
Barrow MS. Bowen WR. Hilal N. Al-Hussany
A. Williams PR. Williams RL. Wright CJ.
Gridin D. Craster RV.
42(5) 2003
Dou HS. Phan-Thien N.
Craciun L. Carreau PJ. Heuzey MC. van de
Ven TGM. Moan M.
60
421
432
443
454
462
477
483
Experimental and numerical study of the rotation and the erosion of llers suspended in viscoelastic uids under simple shear ow
From linear viscoelasticity to the architecture of highly branched polyethylene
A rheological and structural study of a discotic side chain polymer solution
Extensional ow induced coalescence in polymer blends
High frequency parallel plate probe for the measurement of the complex viscosity
of liquids
Eects of the polydispersity on the viscoelasticity of low molecular weight polymers
Unusual extensional behavior of a polystyrene/hips blend
Astruc M. Vervoort S. Nouatin HO. Coupez T.
De Puydt Y. Navard P. Peuvrel-Disdier E.
Majeste JC. Carrot C. Stanescu P.
Franse MWCP. Nijenhuis KT. Picken SJ.
Fortelny I. Zivny A.
Romoscanu AI. Sayir MB. Hausler K. Burbidge AS.
Majeste JC. Allal A. Montfort JP.
Barroso VC. Ribeiro SP. Maia JM.
Rheologica Acta
491
500
516
527
534
544
557
569
578
585
590
Rheological studies of concentrated guar gum
Rheological constitutive equation of solids: a link between models based on irreversible thermodynamics and on fractional order derivative equations
Viscosity enhancement in non-newtonian ow of dilute polymer solutions through
crystallographic porous media
Pressure-driven startup ows of liquid crystalline polymers through slit cells
A new method to determine viscosity of liquids using vibration principles
Comparison of the melt fracture behavior of metallocene and conventional
polyethylenes
Interrelation of creep and relaxation for nonlinearly viscoelastic materials: application to ligament and metal
Orientation behavior of ab and abc block copolymers under large amplitude oscillatory shear ow
Hexagonal defect array formed under steady shear ow in water-in-cholesteric
liquid crystal emulsions
Shear response of monodomains of ow-aligning nematic liquid crystals: tif model
comparisons and eect of pre-tilt
Transient rheology of discotic mesophases
42(6) 2003
Oblonsek M. Sostar-Turk S. Lapasin R.
Andre S. Meshaka Y. Cunat C.
Haward SJ. Odell JA.
Mori N. Shindo M. Nakamura K. Yamamoto
T.
Mert B. Sumali H. Campanella OH.
Doerpinghaus PJ. Baird DG.
Oza A. Vanderby R. Lakes RS.
Stangler S. Abetz V.
Yada M. Fukuda J. Yamamoto J. Yokoyama
H.
Van Horn BL. Boudreau DM. Winter HH.
Grecov D. Rey AD.
Shock & Vibration
211
223
231
269
The variance of energy estimates for the product model
Coupled bending-bending-torsion vibration of a pre-twisted beam with aerofoil
cross-section by the nite element method
A new simulation method providing shock mount selection assurance
Dynamic analysis of shell structures with application to blast resistant doors
10(4) 2003
Smallwood D.
Yardimoglu B. Inman DJ.
Talleya MA. Sarkani S.
Koh CG. Ang KK. Chan PF.
SIAM Journal on Applied Mathematics
1849
1889
1911
1935
1954
1972
1998
2020
2042
2063
2087
2128
2155
2176
Eective equations for sound and void wave propagation in bubbly uids
Critical thresholds in 2d restricted euler-poisson equations
On eective stopping time selection for visco-plastic nonlinear bv diusion lters
used in image denoising
Slowly coupled oscillators: phase dynamics and synchronization
Optimal control applied to competing chemotherapeutic cell-kill strategies
On the motion of solids through an ideal liquid: approximated equations for many
body systems
A canard mechanism for localization in systems of globally coupled oscillators
Low mach number ows in time-dependent domains
Frozen path approximation for turbulent diusion and fractional brownian motion
in random ows
Stability and traveling fronts in lotka-volterra competition models with stage
structure
A hierarchy of models for superconducting thin lms
Image segmentation using active contours: calculus of variations or shape gradients?
Passive levitation in alternating magnetic elds
Spin stabilized magnetic levitation of horizontal rotors
63(6) 2003
Wang NQ. Smereka P.
Liu HL. Tadmor E.
Frigaard IA. Ngwa G. Scherzer O.
Izhikevich EM. Hoppensteadt FC.
Fister KR. Panetta JC.
Ragazzo CG.
Rotstein HG. Kopell N. Zhabotinsky AM. Epstein IR.
Ali G.
Fannjiang A. Komorowski T.
Al-Omari JFM. Gourley SA.
Chapman SJ. Heron DR.
Aubert G. Barlaud M. Faugeras O. JehanBesson S.
Romero LA.
Romero LA.
61
Structural & Multidisciplinary Optimization
151
153
174
189
199
Joakim petersson 1968-2002 - obituary
Finite topology variations in optimal design of structures
Stochastic structural topology optimization: discretization and penalty function
approach
Stable relaxations of stochastic stress-constrained weight minimization problems
Topology optimization of frame structures with exible joints
215
Optimization of the weld path for overlay coatings
25(3) 2003
Bendsoe MP. Klarbring A.
Mroz Z. Bojczuk D.
Evgrafov A. Patriksson M.
Evgrafov A. Patriksson M.
Fredricson H. Johansen T. Klarbring A. Petersson J.
Grenestedt JL.
Structural & Multidisciplinary Optimization
225
237
251
261
270
279
294
Optimization of axisymmetric elastic modulus distributions around a hole for
increased strength
A variable-complexity approach to second-order reliability-based optimization
Integrated optimal topology design and shape optimization using neural networks
Sizing design of truss structures using particle swarms
On improving the ga step-wise shape optimization method through the application of the xed grid fea paradigm
Protability versus safety of high-rise oÆce buildings
Damage-reduction-based structural optimum design for seismic rc frames
25(4) 2003
Huang J. Venkataraman S. Rapo AJ. Haftka
RT.
Burton SA. Hajela P.
Yildiz AR. Ozturk N. Kaya N. Ozturk F.
Schutte JF. Groenwold AA.
Woon SY. Querin OM. Steven GP.
Khajehpour S. Grierson DE.
Li G. Cheng G.
Studies in Applied Mathematics
377
409
435
453
On a two-point boundary-value problem with spurious solutions
On stratied shear ow in sea straits of arbitrary cross section
Direct similarity analysis of generalized burgers equations and perturbation solutions of euler-painleve transcendents
Dyck paths with peaks avoiding or restricted to a given set
111(4) 2003
Ou CH. Wong R.
Deng J. Pratt L. Howard L. Jones C.
Vaganan BM. Asokan R.
Eu SP. Liu SC. Yeh YN.
891
925
Finite element simulation of the axial collapse of metallic thin-walled tubes with
octagonal cross-section
Iterative fourier decomposition of imperfection measurements at non-uniformly
distributed sampling points
Cold formed sections: a state limit code for algeria
941
957
Localized support settlements of thin-walled storage tanks
Nonlinear viscoelastic analysis of thin-walled beams in composite material
901
41(10) 2003
Mamalis AG. Manolakos DE. Ioannidis MB.
Kostazos PK. Dimitriou C.
Lin X. Teng JG.
Sakhraoui S. Mouok-Bouazza L. El Hassar
SMK. Souici M.
Godoy LA. Sosa EM.
Oliveira BF. Creus GJ.
973
987
1005
1019
1041
1053
Robust control of a vibrating plate using mu-synthesis approach
Testing and modeling of shear and peel behavior for bonded steel/frp connections
A material and gauge thickness sensitivity analysis on the nvh and crashworthiness of automotive instrument panel support
Ultimate strength of bolted moment-connections between cold-formed steel members
A thin-walled, dual-curved, steel band wheel with inherent spring suspension for
use on heavy vehicles
Component testing and nite element modeling of standing seam roofs
41(11) 2003
Li P. Cheng L. Li YY. Chen N.
El Damatty AA. Abushagur M.
Lam KP. Behdinan K. Cleghorn WL.
Lim JBP. Nethercot DA.
Batelaan J.
El Damatty AA. Rahman M. Ragheb O.
1073
1089
Web crippling and combined bending and web crippling of cold-formed steel beam
headers
Critical fracture toughness, j(c) and delta(5c), of unidirectional bre-metal laminates
41(12) 2003
Stephens SF. LaBoube RA.
Castrodeza EM. Bastian FL. Ipina JEP.
62
1103
1129
1159
Vibration of prestressed thin cylindrical shells conveying uid
Crush response of an inclined beam-column
Two-dimensional viscoelastic vibration by analytic fourier p-elements
Zhang YL. Gorman DG. Reese JM.
Teng XQ. Wierzbicki T.
Leung AYT. Zhu B. Zheng J. Yang H.
Zeitschrift fur Angewandte Mathematik und Mechanik
635
637
648
663
677
690
705
720
Ecmi-workshop "numerical methods in multibody dynamics", october 2001, bad
herrenalb - preface
Sparsing in real time simulation
Dynamic modeling in the simulation, optimization, and control of bipedal and
quadrupedal robots
An invariant-preserving approach to robust nite-element multibody simulation
A wavelet semidiscretisation of elastic multibody systems
Integration through singularities
Optimal control and real-time optimization of mechanical multi-body systems
Blended lobatto methods in multibody dynamics
83(10) 2003
Arnold M. Fuher C. Simeon B.
Schiela A. Bornemann F.
Hardt M. von Stryk O.
Borri M. Bottasso CL. Trainelli L.
Diaz J. Fuhrer C.
Stossmeister T.
Gerdts M.
Schaub M. Simeon B.
Zeitschrift fur Angewandte Mathematik und Mechanik
731
755
766
773
779
Discontinuous galerkin methods - plenary lecture presented at the 80th annual
gamm conference, augsburg, 25-28 march 2002
On the inverse conductivity problem in the half space
On the solution of the triple correlation equation
Wall eects with slip
A cell-centered fvm for the two-dimensional stokes equation
83(11) 2003
Cockburn B.
Ciulli S. Pidcock MK. Sebu C.
von Wolfersdorf L.
Ramkissoon H. Rahaman K.
Vanselow R.
Zeitschrift fur Angewandte Mathematik und Physik
729
731
739
756
771
784
797
807
815
822
839
869
874
879
Foreword
Asymptotic behaviour of large solutions of quasilinear elliptic problems
Some applications of the maximum principle to a variety of fully nonlinear elliptic
pde's
On the isoperimetric inequality for the buckling of a clamped plate
Isoperimetric inequalities, wul shape and related questions for strongly nonlinear
elliptic operators
Approximate radial symmetry for solutions of a class of boundary value problems
in ring-shaped domains
End eects for pre-stressed and pre-polarized piezoelectric solids in anti-plane
shear
A saint-venant principle for shear band localization
Estimates for solutions of quasilinear problems with dead cores
Sharp parameter ranges in the uniform anti-maximum principle for second-order
ordinary dierential operators
Blow-up and pattern formation in hyperbolic models for chemotaxis in 1-d
Pest control may make the pest population explode
Regularity estimates for solutions of the equations of linear elasticity in convex
plane polygonal domains
Bounds for the rst eigenvalue of the elastically supported membrane on convex
domains
54(5) 2003
Sperb R.
Bandle C.
Philippin GA. Safoui A.
Ashbaugh MS. Bucur D.
Belloni M. Ferone V. Kawohl B.
Henrot A. Philippin GA.
Borrelli A. Horgan CO. Patria AC.
Horgan CO. Olmstead WE.
Bandle C. Vernier-Piro S.
Reichel W.
Hilten T. Levine HA.
Ninomiya H. Weinberger HF.
Bacuta C. Bramble JH.
Sperb R.

PDF version

Transcription

Similar documents

Sohad.Body mechanics, moving, positioning

PowerPoint Presentation - AO

Shook Up - Amazon Web Services

How to Write Fast Numerical Code

VIBRATION ANALYZER Vibration Analyzer

Expressions # 35 (June 2014)

SW880-SW990 - Sakai America

Evaluating and Treating Sports Injuries in Young Athletes

Digital Version - Composites Manufacturing Magazine

paediatric limb fractures and dislocations

eccomas newsletter - The German Association for Computational