Spec Sheet JC30-JC35 - ForkliftSystems.com

Spec Sheet JC30-JC35 - ForkliftSystems.com

S P E C I F I C A T I O N S
OPTIMUM
JC30
S
E
JC35
R
I
E
LPG/Gasoline
Cushion Tire Models
3,000 - 3,500 lb.
• Legendary Nissan Quality
• Enhanced Comfort Through Innovative Design
• Low Total Cost of Ownership
• Powerful Performance
• Clean Air Reduced Emissions Engine Options
• Outworks the Competition
S
OPTIMUM
JC30 3000 lb.
JC35 3500 lb.
JC30
S
E
R
JC35
I
E
Specifications
characteristics
1
2
3
4
5
6
Manufacturer
Model
Capacity
Load Center
Power Type
Operator Orientation
Manufacturer’s name
Model designation
Rated capacity
Distance
Gas - LP
Sit or stand
lbs (kgs)
in (mm)
Nissan
JC30
3000 (1500)
24 (500)
Gas-LP
Sit
Nissan
JC35
3500 (1750)
24 (500)
Gas-LP
Sit
Cushion
2x/2
130 (3300)
11 (280)
1.5 x 4 (40 x 100)
5 / 10
80.4 (2045)
38.2 (970)
83.1 (2110)
179.3 (4555)
81.1 (2060)
48 (1220)
32.5 (825)
37 / 35
68.3 (1735)
14.7 (375)
18.5 (470)
83.1 (2110)
Cushion
2x/2
130 (3300)
11 (280)
1.5 x 4 (40 x 100)
5 / 10
81.8 (2080)
38.2 (970)
83.1 (2110)
179.3 (4555)
81.1 (2060)
48 (1220)
32.5 (825)
37 / 35
69.5 (1765)
14.7 (375)
17.9 (455)
84.3 (2140)
dimensions
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Tire Type
Wheels
Mast
Forks
Tilt Angle
Overall
Dimensions
Grade Clearance
Turning Radius
Overhang
Minimum Right Angle Stacking Aisle
Front and rear
Number (x = driven) front / rear
Maximum fork height (MFH)
Standard freelift
Thickness and width
Standard mast- fwd / back
Length - to face of forks
Width - standard tires
Overall ht. lowered (OHL) - standard mast
Overall height @ MFH w/ LBR
Overhead guard height
Height standard load back rest (LBR)
Width standard carriage (with Nissan mast)
Ramp breakover angle / departure angle
Minimum outside
Front
Rear
Add load length and clearance
in (mm)
in (mm)
in (mm)
degree
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
in (mm)
tan %
in (mm)
in (mm)
in (mm)
in (mm)
performance
25
26
27
28
Speeds
Drawbar Pull Maximum
Max travel speed - forward or reverse
Lift speed - full load / no load
Lowering speed - full load / no load
Full load / no load - gasoline
Full load / no load - lpg
mph (km/h)
10.9 (17.5)
fpm (mm/sec) 100.4 / 112.2 (510 / 570)
fpm (mm/sec) 98.4 / 108.2 (500 / 550)
lbs (kgs)
3970 / 1430 (1800 / 650)
lbs (kgs)
3750 / 1430 (1705 / 650)
10.9 (17.5)
100.4 / 112.2 (510 / 570)
98.4 / 108.2 (500 / 550)
3970 / 1320 (1800 / 600)
3750 / 1320 (1705 / 600)
weight
29
30
31
32
33
34
35
Gradeability Maximum
Truck Weight
Weight Distribution
Tire Size
Full load / no load - gasoline
Full load / no load - lpg
Standard truck, no load
Front axle (no load)
Rear axle (no load)
Front
Rear
%
%
lbs (kgs)
lbs (kgs)
lbs (kgs)
in (mm)
in (mm)
Distance between axles on centers
Front / rear
Front dual tires
Under mast
Type - drum & shoe
Hand or foot applied
in (mm)
in (mm)
in (mm)
in (mm)
36 / 18
36 / 16
36 / 18
36 / 16
5873 (2665)
6314 (2865)
2141 (970)
1993 (905)
3732 (1695)
4321 (1960)
18 x 6 x 12-1/8 (455 x 150 x 310)
14 x 4-1/2 x 8 (355 x 115 x 205)
chassis
36
37
38
39
40
41
Wheelbase
Tread-Center of Tire
Ground Clearance
Service Brake
Parking Brake
47.2 (1200)
32.2 / 31.5 (820 / 800)
N/A
3.0 (75)
Drum & Shoe
Hand
47.2 (1200)
32.2 / 31.5 (820 / 800)
N/A
3.0 (75)
Drum & Shoe
Hand
drive line
42
43
44
Steering
Engine
45
46
47
48
Transmission
Type
Manufacturer / Model
Rated output (SAE gross / JIS) - gasoline
Rated output (SAE gross / JIS) - lpg
Rated torque (SAE gross / JIS) - gasoline
Rated torque (SAE gross / JIS) - lpg
Displacement
Number of speeds forward / reverse
Type
hp/rpm (PS/rpm)
hp/rpm (PS/rpm)
ft-lb - rpm (kg-m/rpm)
ft-lb - rpm (kg-m/rpm)
cu in (cm3)
NOTE: Performance specifications based on Nissan wide-view mast (130" MFH) unless otherwise noted.
Hydrostatic
Hydrostatic
Nissan / H20-II
Nissan / H20-II
50 / 2400 (46 / 2400)
47 / 2400 (43 / 2400)
116 / 1600 (15.5 / 1600)
110 / 1600 (14.5 / 1600)
120.94 (1982)
1/1
1/1
Automatic
Automatic
S
Standard Equipment
OPTIMUM
Ergonomics / Safety
JC30
❖ Independent float system (IFS) greatly reduces vibration at
❖
❖
❖
❖
❖
❖
❖
❖
❖
❖
❖
❖
❖
❖
every point of operator contact
- Brake and inching pedals mounted to the truck frame
reduce pedal vibration
- Rubber mounted shock absorber within the steering column
reduces steering wheel vibration
- Top panel design with rubber insulated mounts, rubber
seals and fiberglass insulation reduces vibration, engine
heat and noise within the entire operator compartment
Full suspension seat with weight and back angle adjustment
maximizes operator comfort
5" of front-to-back seat adjustment allows greater operator leg
room
Hip restraints with retractable seat belts provide greater operator security
Infinitely adjustable steer column enhances operator comfort
and productivity
Exclusive single lift/tilt lever allows simultaneous lifting and
tilting to increase operator efficiency
Heel/toe pedal design provides efficient motion for reduced
effort and fatigue
Separate inching pedal allows full RPM lifting while making
precise maneuvers increasing operator efficiency
Durable welded metal assist grip and metal traction plate on the
entry step allows safe and easy compartment entry and exit.
Metal diamond tread compartment floorboards provide positive
footing
Hydrostatic power steering reduces operator steer effort and fatigue
Low front cowl design enhances forward visibility of fork tips
for better load handling efficiency
Textured three spoke steering wheel allows excellent visibility of
the dash display for greater operator awareness of truck status
Dash display visibly communicates the following truck status
and warnings for operator awareness: fuel level, hour meter,
water temperature, oil temperature, oil pressure, torque converter oil temperature, coolant level warning, battery charge
indicator, LPG tank bracket lock warning, and air cleaner
condition indicator
Audible back-up warning alarm promotes a safer work
environment
Standard light package includes two front overhead guard
mounted headlights with protective guards for greater
operational visibility
Performance / Durability
S
Performance / Durability
❖
❖
❖
❖
❖
❖
❖
❖
R
I
E
(continued)
❖ Piccolo exhaust system disperses exhaust without dirt and
debris kick-up
❖ Corrugated fin-type radiator with engine shroud provides
enhanced cooling performance
❖ Nissan’s flat face mast design features rolled steel channels, large
cross sections, and thick inner rails for increased capacity retention
❖ Powder coat paint provides a durable, high gloss finish inside
and out for increased scratch resistance, improved U.V.
protection, and an exceptional appearance
Serviceability
❖ Clamshell hood design opens nearly 90 degrees for maximum
❖
❖
❖
❖
❖
❖
❖
❖
accessibility to engine and truck components. Two gas springs
assist and retain the hood in the open position
Two-piece steel, diamond tread floorboard is easily removed
for access to components and grease fittings
One-touch radiator cover is easily removed, without the use of
tools, for cooling system checks
Hatch in the floorboard allows quick and easy transmission
fluid level checks
Opening in the dash panel allows quick and easy brake fluid
level checks
Five-piece reinforced overhead guard design allows easy
replacement should parts become damaged; slotted design
allows excellent upward visibility for load handling and placement
Nissan’s exclusive swing-out LPG bracket simplifies tank
change-out. A lamp on the dash display warns the operator if
the bracket is not properly locked in place
All grease fittings are easily accessible for routine maintenance
Side thrust rollers on the fork carriage are easily accessed for
carriage adjustments
Optional Equipment
❖ Nissan’s exclusive three stage Optiview mast provides 50%
❖ Nissan H20-II, 2.0 liter, four cylinder, in-line engine features an
oversquare design which efficiently produces superior horsepower with reduced vibration and noise
Nissan-designed engine and transmission system effectively
utilizes all available torque to provide exceptional power and
performance
Dual hydraulic filtration keeps system free from contaminants
increasing reliability and component life
Rugged, fabricated steel I-beam steer axle construction,
protects steer cylinder components while providing reliable performance
High air intake system on the overhead guard pillar pulls in
cool, clean air for better engine performance
Cyclone air cleaner with replaceable filter keeps contaminants
out for longer engine life
Self-adjusting, self-energizing brakes are sealed to keep
contaminants out resulting in longer component life and
reliable performance
Contoured counterweight design enhances truck maneuverability
Rugged, unitized frame design incorporates an integral
hydraulic tank for better heat dissipation, increased durability
and long life
E
JC35
❖
❖
❖
❖
❖
❖
❖
❖
❖
❖
❖
greater visibility for increased productivity and load handling
efficiency. Free lift cylinders are nested behind mast rails for a
larger field of view
Choice of exclusive Optiview three stage, Wide-View, Duplex,
or standard Triplex masts
Separate lift and tilt levers with pistol grip type knobs
Standard or polished and tapered forks in a variety of lengths
(36", 42", 48", 54", and 60")
Rotating beacons and strobe lights
Hydraulic accumulator in the lift system
CARB compliant Clean Air Reduced Emissions engine
with either gas or LPG fuel system
Auxiliary hydraulics w/internal hose reeving
Side shifter
Extra tilt
Electronic Engine Management System to provide
- Throttle body fuel injection
- Enhanced performance and efficiency
- Engine shutdown system with limp home mode
- Electronic governor
Cotton core radiator
❖ Rearview mirrors
Consult your local Nissan Forklift Representative for additional optional equipment.
S
OPTIMUM
JC30 3000 lb.
JC35 3500 lb.
JC30
JC30 & JC35 masts
Maximum
Fork Height
(MFH)
in (mm)
Overall
Height
Lowered
(OHL)
in (mm)
Freelift
(FL)
in (mm)
Standard
Tilt
F/B Degree
Wide-View
82 (2085)
59.1 (1500)
11 (280)
5/10
Wide-View
106 (2690)
71.3 (1810)
11 (280)
5/10
Wide-View
130 (3300)
83.1 (2110)
11 (280)
5/10
Wide-View
146 (3710)
93.3 (2370)
11 (280)
5/10
Wide-View
157 (3990)
100.8 (2560)
11 (280)
5/10
Duplex
105.5 (2680)
72 (1830)
48 (1220)
5/10
Duplex
129.5 (3289)
84 (2135)
60 (1530)
5/10
1
152 (3850)
71.3 (1810)
47.6 (1210)
5/5
Triplex 1
169 (4300)
77.2 (1960)
53.5 (1360)
5/5
Triplex 1
187 (4750)
83.1 (2110)
59.4 (1510)
5/5
Triplex 1
203 (5154)
88.2 (2240)
64.8 (1645)
5/5
1
217 (5500)
93.3 (2370)
69.7 (1770)
5/5
236 (6000)
100.8 (2560)
77.2 (1960)
5/5
Mast Type
Triplex
Triplex
Triplex 1
1
161 (4090)
77.2 (1960)
52 (1320)
5/5
Optiview 1
178.7 (4540)
83.1 (2110)
57.9 (1470)
5/5
1
194.5 (4940)
88.4 (2245)
63 (1600)
5/5
Optiview 1
208.3 (5290)
93.3 (2370)
68.1 (1730)
5/5
Optiview 1
228 (5790)
100.8 (2560)
75.6 (1920)
5/5
Optiview
Optiview
1
S
E
14
R
JC35
I
E
S
37
37
21
11
24
12
43.1"
(1095 mm)
MFH
17
OHL
18
FL
34
22
36
23
13
Wide drive tires are standard. Overall truck width is 38.2"
Capacity at MFH
u s i n g 1 8 7 " Tr i p l e x M a s t
8000
7000
Ask your Nissan Forklift
representative about our
Clean Air Reduced Emissions
engine options.
Capacity (lbs)
6000
5000
4000
3000
2000
JC35
JC30
1000
0
0
24 28 32 36 40 44 48 52
Load Center (in)
240 N. Prospect Street
Marengo, IL 60152 USA
Phone (815) 568-0061
Fax (815) 568-0179
www.nissanforklift.com
NOTES:
Nissan forklifts meet or exceed all ANSI B56.1 Safety Standards for Powered Industrial
Trucks and Underwriter’s Laboratories requirements as to fire hazard for gasoline, LP gas
and diesel. Performance may vary as the specifications shown represent nominal values
obtained under typical operating conditions.
Nissan Forklift Corporation, North America, reserves the right to make product changes
relating to colors, equipment or specifications without notice. For more information, contact
your Nissan Forklift representative.
SS-OPT-C1 01-02
Printed in USA
35
Material
Handling
and
Fleet Management
Specialist
[email protected]
www.forkliftsystems.com
Contact Info
MAILING ADDRESS
Forklift Systems Incorporated
884 Elm Hill Pike
Nashville, TN 37210
CONTACT INFO
Phone: 615-255-6321
Toll Free: 800-752-1882
Email: contact@forkliftsystems.
com
Web: www.forkliftsystems.com
SOCIAL MEDIA
Click Map to Open Google Map of Location
Tennessee Main Office: 884 Elm Hill Pike, Nashville,TN 37210
(615) 255-6321
Click Map to Open Google Map of Location
Alabama Main Office: 132 West Park Drive, Birmingham, AL 35211
(205) 945-1112
Other Products
Electric Pallet Trucks
Large Capacity Forklifts
I.C. & Electric Forklifts
Reach Truck & Order Picker
Rider Sweeper & Scrubber
Walkie Sweeper & Scrubber
Industrial Utility Vehicles
Personnel Shuttles
Burden Carriers
Scissor Lifts & Boom Lifts
Rack & Storage Systems
In-Plant Office - Building
[email protected]
www.forkliftsystems.com