PAC121TS/125T hand torch consumables

PAC121TS/125T hand torch consumables
Shielded consumables
40A, 50 A
Torch head
Shield
40 A 120601
50 A 120601
Retaining cap
120600
120600
Nozzle
120438
120282
Electrode
120573
120573
Swirl ring
020361
020361
Unshielded* consumables
50 A
Torch head
Deflector
50 A 120303
Retaining cap
120600
Nozzle
020395
Electrode
120573
Swirl ring
020361
Extended consumables
Torch head
50 A
Deflector
50 A 120303
Pipe saddle 120303
Retaining cap
120600
120600
Nozzle
120304
120305
Electrode
120574
120574
Swirl ring
020361
020361
Gouging consumables
Torch head
50 A
Shield
50 A 120608
Retaining cap
120600
Nozzle
120281
Electrode
120573
Swirl ring
020361
For improved
performance, retrofit
with the RT60 torch
(see page 75).
FineCut consumables
Torch head
40 A
Deflector
40 A 120303
40 A CE** 220326
Retaining cap
120600
120600
Nozzle
220330
220330
Electrode
120574
120574
Swirl ring
220332
220332
Notes:
The nozzles and swirl rings shown must be used as a set.
A label located on the torch handle indicates whether the torch is a PAC121TS or PAC125T.
TECHNOLOGIES
FineCut ®
Spiral groove
Vented shield
*In countries following CE standards, unshielded consumables may only be used in mechanized torch
applications.
**CE shield for use in countries requiring CE, CCC, GOST marks.
Hypertherm, Powermax, PAC and FineCut are trademarks of Hypertherm, Inc. and may be registered in the United States
and/or other countries.
www.hypertherm.com 31
PAC121TS/125T hand torch assembly
7
3
5
2
4
1
8
6
Assembly – PAC121TS hand torch assembly
1.
2.
3.
4.
5.
6.
7.
7.
8.
Part number
Description
083130*
083131*
083219*
120556
001288
128284
002244
027254
075340
129001
129002
044016
023922
028907
PAC125T/Powermax800 hand torch assembly with 25' (7.6 m) leads
PAC125T/Powermax800 hand torch assembly with 50' (15.2 m) leads
Test torch with 6' (1.8 m) leads
Torch main body with switch
Handle (includes both halves)
Switch, torch pushbutton
Safety trigger assembly
Trigger spring
Screw, #4 x 5/8" (five required)
PAC121TS torch leads, 25' (7.6 m)
PAC121TS torch leads, 50' (15.2 m)
O-ring, Buna – N 90 Duro
Work lead with clamp, 20' (6.1 m)
Work lead with clamp, 50' (15.2 m)
Assembly – PAC125T hand torch assembly
1.
2.
3.
4.
5.
6.
7.
7.
8.
Part number
Description
083130*
083131*
083219*
120570
001288
128284
002244
027254
075340
129352
129353
044016
023922
028907
PAC125T/Powermax800 hand torch assembly with 25' (7.6 m) leads
PAC125T/Powermax800 hand torch assembly with 50' (15.2 m) leads
Test torch with 6' (1.8 m) leads
Torch main body with switch
Handle (includes both halves)
Switch, torch pushbutton
Safety trigger assembly
Trigger spring
Screw, #4 x 5/8" (five required)
PAC125T torch leads, 25' (7.6 m)
PAC125T torch leads, 50' (15.2 m)
O-ring, Buna – N 90 Duro
Work lead with clamp, 20' (6.1 m)
Work lead with clamp, 50' (15.2 m)
For improved
performance, retrofit
with the RT60 torch
(see page 75).
*Assembly includes consumables
Note:
A label located on the torch handle indicates whether the torch is a PAC121TS or PAC125T.
Hypertherm, Powermax, PAC and FineCut are trademarks of Hypertherm, Inc. and may be
registered in the United States and/or other countries.
32
www.hypertherm.com
PAC121M/125M machine torch consumables
Shielded consumables
Torch head
40 A, 50 A
Shield
40 A 120602
50 A 120602
Ohmic
Retaining cap
120600
120600
120964
Nozzle
120438
120282
Electrode
120573
120573
Swirl ring
020361
020361
Unshielded consumables
Torch head
50 A
Deflector
50 A 120303
Retaining cap
120600
Nozzle
020395
Electrode
120573
Swirl ring
020361
Extended consumables
Torch head
50 A
Deflector
50 A 120303
Pipe saddle 120303
Retaining cap
120600
120600
Nozzle
120304
120305
Electrode
120574
120574
Swirl ring
020361
020361
Gouging consumables
Torch head
50 A
Shield
50 A 120608
Retaining cap
120600
Nozzle
120281
Electrode
120573
For improved
performance, retrofit
with the RT60M torch
(see page 77).
Swirl ring
020361
FineCut consumables
Torch head
40 A
Shield / Deflector
40 A 120303
40 A CE 220326
Ohmic 220403
Retaining cap
120600
120600
120964
Nozzle
Electrode
220330 120574
220330 120574
Swirl ring
120576
120576
Notes:
The nozzles and swirl rings shown must be used as a set.
A label located on the torch handle indicates whether the torch is a PAC121TS or PAC125T.
TECHNOLOGIES
FineCut ®
Spiral groove
Vented shield
Hypertherm, Powermax, PAC and FineCut are trademarks of Hypertherm, Inc. and may be registered in the United States
and/or other countries.
www.hypertherm.com 33
PAC121M/PAC125M machine torch assembly
5
1
8
6
2
3
4
7
Assembly – PAC121M machine torch assembly
1.
2.
3.
4.
4.
4.
4.
5.
6.
7.
7.
7.
8.
4.
4.
4.
4.
Part number
083219*
120558
020620
020559
028923
028918
028926
028919
075321
075322
028461
028462
028463
044016
128123
128125
128126
128127
023922
028907
Description
Test torch with 6' (1.8 m) leads
Torch main body with switch
Torch position sleeve
Torch sleeve
Torch lead with pigtail, 14' (4.3 m)
Torch lead with pigtail, 25' (7.6 m)
Torch lead with pigtail, 35' (10.7 m)
Torch lead with pigtail, 50' (15.2 m)
Screw, 4-40 x 1/2, Hex, SS (three required)
Screw, 4-40 x 1/4, SL, SZ
On/Off pendant, 25' (7.6 m)
On/Off pendant, 50' (15.2 m)
On/Off pendant, 75' (22.9 m)
O-ring: Buna 90 Duro .614 x .070
Torch lead, 14' (4.3 m) (without pigtail)
Torch lead, 25' (7.6 m) (without pigtail)
Torch lead, 35' (10.7 m) (without pigtail)
Torch lead, 50' (15.2 m) (without pigtail)
Work lead with clamp, 20' (6.1 m)
Work lead with clamp, 50' (15.2 m)
Assembly – PAC125M machine torch assembly
1.
2.
3.
4.
4.
4.
4.
4.
4.
4.
4.
5.
6.
7.
7.
7.
8.
Part number
083136*
083137*
083138*
083139*
083140*
083141*
083142*
083143*
083219*
120583
020620
120613
129339
129338
129340
129341
129343
129342
129344
129345
075321
075322
028714
128061
128062
044016
023922
028907
Description
PAC125M torch assembly with pigtail with 14' (4.3 m) leads
PAC125M torch assembly with pigtail with 25' (7.6 m) leads
PAC125M torch assembly with pigtail with 35' (10.7 m) leads
PAC125M torch assembly with pigtail with 50' (15.2 m) leads
PAC125M torch assembly without pigtail with 14' (4.3 m) leads
PAC125M torch assembly without pigtail with 25' (7.6 m) leads
PAC125M torch assembly without pigtail with 35' (10.7 m) leads
PAC125M torch assembly without pigtail with 50' (15.2 m) leads
Test torch with 6' (1.8 m) leads
Torch main body with switch
Torch position sleeve
Torch sleeve
Torch lead with pigtail, 15' (4.6 m)
Torch lead with pigtail, 25' (7.6 m)
Torch lead with pigtail, 35' (10.7 m)
Torch lead with pigtail, 50' (15.2 m)
Torch lead without pigtail, 14' (4.3 m)
Torch lead without pigtail, 25' (7.6 m)
Torch lead without pigtail, 35' (10.7 m)
Torch lead without pigtail, 50' (15.2 m)
Screw, 4-40 x 1/2, Hex, SS (three required)
Screw, 4-40 x 1/4, SL, SZ
On/Off pendant, 25' (7.6 m)
On/Off pendant, 50' (15.2 m)
On/Off pendant, 75' (22.9 m)
O-ring: Buna 90 Duro .614 x .070
Work lead with clamp, 20' (6.1 m)
Work lead with clamp, 50' (15.2 m)
For improved
performance, retrofit
with the RT60M torch
(see page 77).
*Assembly includes consumables
Hypertherm, Powermax, PAC and FineCut are trademarks of Hypertherm, Inc. and may be
registered in the United States and/or other countries.
34
www.hypertherm.com