MAINTENANCE PRODUCTS

MAINTENANCE
PRODUCTS
TABLE OF CONTENTS
Lubricant Products
Hydraulic/Transmission Fluid
Engine Oil
Gear & Transmission Oil
Grease
p. 4-7
p. 8-10
p. 11-12
p. 13
Filtration Products
Lube Filtration
Fuel Filtration
Hydraulic Filtration
Air Filtration
All-Makes Filters
p. 14-15
p. 16
p. 17
p. 18
p. 19
Coolant / Antifreeze
XHD
p. 20-21
fluid Analysis
Systemgard™ Fluid Analysis
2
p. 22-23
A GUARANTEE OF QUALITY
New Holland delivers
peak performance
Engineered to oUR
own standards
New Holland has
what it takes
New Holland-approved maintenance
products are engineered with a guarantee
of quality. For example, our latest
generation of Ambra lubricants is specially
formulated for New Holland equipment,
while also meeting or exceeding the top
performance requirements of agricultural
and industrial manufacturers across
the industry.
Working at higher temperatures and
pulling heavier loads, today’s gas and
diesel engines are working harder
than ever. It takes superior protection
to stand up to the challenge.
When it comes to superior protection
and performance, New Holland-approved
maintenance products are among the
finest in the industry.
Season after season, New Holland
products deliver optimum protection,
peak performance and assurance
that what you’re putting into your
equipment is top quality.
That’s why New Holland develops its own
standards. Our lubricants are specially
formulated with a complex blend of highquality lube stocks and additives, and our
filtration products are engineered with
heavy-duty media to meet the needs of
our customers.
But don’t just take our word for it. In
the pages that follow, take a close
look at the features and benefits that
distinguish our products–features and
benefits that are your guarantee of
quality in a name you can trust.
3
HYDRAULIC / TRANSMISSION FLUIDS
MASTERTRAN™ Hydraulic / Transmission Oil (MAT-3505)
A unique, all-weather hydraulic/transmission fluid
MASTERTRAN is, quite simply, the finest hydraulic/transmission
fluid we make. MASTERTRAN is recommended in the operator
manuals of many of our newer high-horsepower equipment. It
enhances your brake and clutch capabilities while helping to reduce
brake chatter, clutch slippage and wear, and final drive wear.
MASTERTRAN fluid is designed for use in an ambient temperature
range of -20˚ to +120˚F (-30˚ to +50˚C).
MASTERTRAN:
» Provides better water tolerance and filtration efficiency
than typical tractor fluids, which is critical for preventing
additive fallout, filter plugging and sluggish performance
» Provides stable viscosity, which is essential to maintaining
optimum machine performance and long life
» Provides superior wear protection for hydraulic components,
drive train gears and other transmission parts
» Recommended for TG/TJ tractors, CR combines and other
models (where recommended by operator manual)
» Provides controlled frictional characteristics for smooth
operation of wet brakes and clutches
» Special non-zinc additives ensure a thermally and
hydrolytically stable product, keeping the system free
of deposits and preventing the creation of corrosive
by-products
» Meets the frictional requirements of Caterpillar TO-2
4
Part No.
product
Container size
86639558
mastertran
1 gal./3.785 l.
86639559
mastertran
2.5 gal./9.46 l.
86639560
mastertran
5 gal./18.93 l.
86639561
mastertran
30 gal./113.6 l.
86639562
mastertran
55 gal./208.2 l.
86639563
mastertran
330 gal./1249.2 l.
OXIDATION-CORROSION TEST
OXIDATION-CORROSION TEST
Milligrams
Milligrams
90
90
80
80
70
Additive/
Water Fallout
MasterTran™
20
10
100
The ability of MASTERTRAN
to protect and perform
when exposed to moisture
is unmatched.
50
40
40
30
30
20
0
Volume
Volume
Passed,
Passed,
mlsmls
The difference
is easy to see.
MASTERTRAN™ has the unique
ability to hold up to 1% of
its volume in water and not
experience any harmful effects,
like additive fallout, whereas
typical tractor fluids experience
problems at 0.5% or less.
70
60
60
50
Lab tests
confirm what
field tests
have proven:
Copper
Weight
Loss
Copper
Weight Loss
Copper
Deposit
Copper
Deposit
Typical Tractor Fluid A
Typical Tractor Fluid B
Typical Tractor Fluid A
Typical Tractor Fluid B
700
700
600
600
500
500
400
400
300
300
200
200
100
100
0
0
Brass
Weight
BrassLoss
Weight Loss
Brass
Deposit
Brass
Deposit
MASTERTRAN™ Transmission Oil
MASTERTRAN™ Transmission Oil
WET/AGED FILTERABILITY TEST, 5 MICRON
WET/AGED FILTERABILITY TEST, 5 MICRON
Typical Tractor
FluidTractor
A
Typical
Fluid A
Typical Tractor
FluidTractor
B
Typical
Fluid B
MASTERTRAN™
™
Transmission
MASTERTRANOil
Transmission Oil
MASTERTRAN™ SSL
Transmission Oil (MAT-3504)
MASTERTRAN SSL fluid is designed to work optimally all the way down
to -40˚F (-40˚C), yet it does not need to be drained in the summer,
because it’s a synthetic blend.
Part No.
product
Container size
86994339
mastertran ssl
5 gal./18.93 l.
B505688
mastertran ssl
bUlk (GAL.)
B505689
mastertran ssl
bUlk (LITRE)
5
HYDRAULIC / TRANSMISSION FLUIDS
MULTI G 134™ Hydraulic / Transmission Fluid (MAT-3525)
MULTI G 134 is a multipurpose fluid that has been
recommended in New Holland and Ford operator manuals
for many years. It’s recommended for current low- and
medium-horsepower tractors and loader backhoes. It helps
ensure the best performance of your transmission, PTO clutches,
wet brakes and hydraulic system. Unique friction modifiers
suppress wet brake chatter, ensuring maximum stopping power
Part No.
product
Container size
9624655DS
MULTI G 134
1 QT./.946 L.
9624656DS
MULTI G 134
1 GAL./3.785 L.
9624450
MULTI G 134
2.5 gal./9.46 l.
9624451
MULTI G 134
5 gal./18.93 l.
9624496
MULTI G 134
30 gal./113.6 l.
9624452
MULTI G 134
55 gal./208.2 l.
9624781DS
MULTI G 134
330 gal./1249.2 l.
9624657DS
MULTI G 134
bUlk (GAL.)
B505687
MULTI G 134
bUlk (liteR)
and brake life. Superior anti-wear additives reduce pitting on
critical gear surfaces. Oxidation inhibitors keep sludge from
forming and keep the oil flowing to critical parts. MULTI G 134
is compatible with commonly used seal and gasket materials.
This helps reduce oil leaks from seals that can harden, shrink
or swell — extending seal life.
F200A Multi-Season Hydraulic / Transmission Fluid (MAT-3526)
F200A is a multipurpose, cold-weather hydraulic/transmission
fluid that can be used when your operator manual recommends
134, but improved low-temperature capabilities are needed
(below 10˚F/-12˚C). In addition to improved low-temperature
capabilities, F200A Multi-Season Hydraulic Oil provides
the reliability of 134 at high temperatures, so there’s no need
to remove this fluid during the summer months.
6
Part No.
product
Container size
b17805
F200A multi-season
5 gal./18.93 l.
b17806
F200A multi-season
55 gal./208.19 l.
MULTI BIO Biodegradable
Hydraulic / Transmission Fluid
MULTI BIO is a biodegradable hydraulic/transmission fluid
currently approved for New Holland T6000, T7000, TL, TM, TN,
TS and Genesis 70 series tractors, along with CX combines. This
biosynthetic-based 10W-30 fluid exceeds several governmental
biodegradability and ecocompatibility requirements, with
biodegradability exceeding 90%, including OECD 201/202/
203/301B, VAMIL(NL), WGK 0, CEC L33A-93 and D5864-96.
It’s a multifunctional oil for transmission, wet brakes and
hydraulic systems.
Part No.
product
Container size
73340127
MULTI bio
5 gal./18.93 l.
73340151
MULTI bio
30 gal./113.6 l.
HYDROSYSTEM Antiwear (AW)
Hydraulic Fluid (MAT-3508)
HYDROSYSTEM hydraulic fluid is a high-performance, anti-wear
oil designed for use in applications where an anti-wear hydraulic
oil is required.
HYDROSYSTEM:
» Meets
or exceeds specs for DIN51524-Part2, Dennison HF-O and
Cincinnati Milacron P-70
» Resists viscosity and thermal breakdown
» Provides
ultra-pure filtration
product
ambient temp. range
˚Fahrenheit
˚Celsius
aw46
+5˚ TO +95˚F
-15˚ TO +35˚C
aw68
+23˚ TO +122˚F
-5˚ TO +50˚C
aw100
+41˚ TO +122˚F
+5˚ TO +50˚C
Part No.
product
Container size
116799a2
hydrosystem 46
5 gal./18.93 l.
87299123
hydrosystem 46
55 gal./208.19 l.
87299897
hydrosystem 68
5 gal./18.93 l.
87299774
hydrosystem 100
5 gal./18.93 l.
7
engine oils
MASTERGOLD™ HSP (MAT-3507)
MASTERGOLD HSP is a premium, high-performance engine oil
specifically designed and tested to provide maximum protection,
performance and long life in heavy-duty, high-temperature
operations. It’s designed for New Holland construction,
agricultural and other off-highway diesel-powered equipment.
MASTERGOLD HSP:
» Provides
superior protection against wear and corrosion
» Helps
keep engines exceptionally clean, minimizing deposits
and maintaining excellent soot control
» Allows
excellent cold-weather starting and operating performance
» Meets performance requirements of API Service Classification
CI-4, CH-4, CG-4, CF-4, CF, CE, CD II, CD or CC; Mack EO/K-2;
Mack EO-M Plus; Cummins 20076, 20077, 20078; ACEAE5; JASO
CD; MAN 270 and 271; Caterpillar Series 3 and Caterpillar TO-2;
as well as Allison C-3 and C-4 performance requirements
sae
Part No.
product
Container size
0W-40
86994334
mastergold SSL
1 qt./.95 l.
0W-40
86994335
mastergold SSL
2.5 gaL./9.46 l.
MASTERGOLD SSL (MAT-3507)
0W-40
86994336
mastergold SSL
30 GAL./113.56 l.
10W
407357R5
mastergold
5 gal./18.93 l.
30
407352r5
mastergold
1 qt./.95 l.
All-season, extreme temperature
engine oil
30
132032A2
mastergold
1 gal./3.79 l.
30
9613289
mastergold
2.5 gaL./9.46 l.
30
407356R5
mastergold
5 gal./18.93 l.
30
407360R5
mastergold
30 gal./113.56 L.
30
9613288
mastergold
55 gal./208.19 l.
10W-30
9613313
mastergold
1 qt./.95 l.
10W-30
86641052
mastergold
1 gal./3.79 l.
10W-30
9613314
mastergold
2.5 gaL./9.46 l.
10W-30
9673508DS
mastergold
5 gal./18.93 l.
10W-30
9624494
mastergold
30 gal./113.56 l.
10W-30
9613309
mastergold
55 gal./208.19 l.
10W-30
9624878DS
mastergold
330 gal./1249.2 l.
15W-40
86641081
mastergold
1 qt./.95 l.
15W-40
86641082
mastergold
1 gal./3.79 l.
15W-40
86641084
mastergold
2.5 gaL./9.46 l.
15W-40
86641083
mastergold
5 gal./18.93 l.
15W-40
86641085
mastergold
30 gal./113.56 l.
15W-40
86641086
mastergold
55 gal./208.19 l.
15W-40
86641087
mastergold
330 gal./1249.2 l.
20W-50
332390A2
mastergold
5 gal./18.93 l.
» A full synthetic engine oil that provides superior
performance in severe service applications over a
broad ambient temperature range of -40˚ to +104˚F
(-40˚ to +40˚C)
» Provides
faster engine starts and more immediate
engine lubrication
» SAE 0W-40
8
Simple math:
Less oil consumption = Less expense
MASTERGOLD™ is formulated to keep your engine running cleaner throughout its life. Over time, that means lower oil
consumption and less oil expense. In fact, if you choose NOT to use MASTERGOLD, you might need to change your
oil as much as 50% more often.
TOTAL BASE NUMBER
OIL CONSUMPTION
PISTON DEPOSITS*
*After 250-hour test.
14
12.0
12
10
6
4
2
Oil Consumption
4
8.0
Relative Engine Wear
8
Competitive
Brand Oil
5
10.3
3
2
1
MASTERGOLD
Engine Oil
0
0
Competitive
Brand CH-4
Competitive
Brand CI-4
MASTERGOLD
Engine Oil
Total Base Number (TBN) is an
indication of the detergent and
dispersant additive levels in an oil.
These additives neutralize acids and
fight soot buildup and filter plugging.
Competitive
Brand Oil
MASTERGOLD
Engine Oil
MASTERGOLD engine oil’s unique
formula keeps piston deposits down
so your engine runs cleaner.
Time
Cleaner-running engines use less oil
over time. That can really add up to
cost savings.
9
engine oils
AUTO SUPREME™ Engine Oil
For automotive gasoline engines
AUTO SUPREME engine oil provides protection and performance for
all seasons, eliminating the need for seasonal oil grade changes.
It’s formulated with base oils and additives that provide superior
performance and protection for light application engines.
» Provides fast warm-up
» Improves fuel efficiency
» Reduces friction for quick, easy starting with instant lubrication
sae
Part No.
product
Container size
5W-30
372255A2
AUTO SUPREME
1 QT./.95 L.
5W-30
B505696
AUTO SUPREME
55 GAL./208.19 L.
10W-30
B600401
AUTO SUPREME
1 QT./.95 L.
10W-30
B505710
AUTO SUPREME
55 GAL./208.19 L.
Put New Holland quality in your truck or car too!
10
Gear & Transmission Oils
HYPOIDE EP Gear Lube (MAT-3511)
For high-speed/low-torque and low-speed/high-torque applications
This premium, extreme-pressure gear lubricant provides superior
foam and oxidation stability, and reduces the risk of corrosion
and deposits that can cause costly damage to your equipment.
It’s formulated to stand up to high-temperature conditions.
HYPOIDE EP GEAR OIL:
» Prevents objectionable deposits and corrosion in gear cases,
bearing rollers, races and thrust washers
» Exceeds API GL-5 and MIL-L-2105D requirements, and meets
MIL-PRF2105E and ZFTE-ML05A
sae
Part No.
product
Container size
80W-90
B80901
HYPOIDE 90 EP
1 QT./.95 L.
80W-90
B80902
HYPOIDE 90 EP
1 GAL./3.79 L.
80W-90
B80903
HYPOIDE 90 EP
2.5 GAL./9.46 L.
80W-90
B80904
HYPOIDE 90 EP
5 GAL./18.93 L.
80W-90
B80905
HYPOIDE 90 EP
16 GAL./60.64 L.
80W-90
B80906
HYPOIDE 90 EP
30 GAL./113.56 L.
80W-90
B80907
HYPOIDE 90 EP
55 GAL./208.19 L.
85W-140
B85141
HYPOIDE 140 EP
1 QT./.95 L.
85W-140
B85142
HYPOIDE 140 EP
1 GAL./3.79 L.
85W-140
B85143
HYPOIDE 140 EP
2.5 GAL./9.46 L.
85W-140
B85144
HYPOIDE 140 EP
5 GAL./18.93 L.
85W-140
87299117
HYPOIDE 140 EP
16 GAL./60.64 L.
85W-140
B85146
HYPOIDE 140 EP
55 GAL./208.19 L.
HYPOIDE SSL Gear Lube (MAT-3511)
All-season, extreme temperature gear lubricant
HYPOIDE SSL Gear Lube is a synthetic-based, extreme-pressure
transmission and gear oil for severe service in agricultural and
construction equipment.
HYPOIDE SSL GEAR LUBE:
» Highly resistant to thermal breakdown
» Provides enhanced performance features over
a wider temperature range
» Recommended for use in cutter bar assemblies
sae
Part No.
product
Container size
75W-90
87299775
HYPOIDE SSL
1 QT./.95 L.
75W-90
87299136
HYPOIDE SSL
5 GAL./18.93 L.
80W-140
87299904
HYPOIDE SSL
1 QT./.95 L.
80W-140
87299943
HYPOIDE SSL
5 GAL./18.93 L.
11
Gear & Transmission Oils
Transaxle Fluid (MAT-3510)
A unique drive train lubricant
TRANSAXLE FLUID provides smooth, quiet operation in certain components of New Holland
wheel loaders (where recommended by operator manual). Its excellent, low-temperature
characteristics are superior to standard products.
» Minimizes deposits and corrosion of gear case and components
» Extends brake and gear life
SAE
Part No.
Product
Container size
20W-40
87667672
TRANSAXLE FLUID
5 GAL. /18.93 L.
80W-140
B17777
TRANSAXLE FLUID
2.5 GAL./9.46 L.
80W-140
B17778
TRANSAXLE FLUID
5 GAL. /18.93 L.
80W-140
B17779
TRANSAXLE FLUID
55 GAL./208.19 L.
HYDRODEX 3 Automatic Transmission Fluid (ATF)
HYDRODEX 3 is an automatic transmission fluid meeting GM Dexron® III and Ford Mercon®
specifications. It’s designed for use in certain powershift transmissions, power steering systems
and other hydraulic systems requiring Dexron® III in off-highway equipment.
Part No.
product
Container size
87299133
HYDRODEX 3
1 QT./.95 L.
87299134
HYDRODEX 3
2.5 GAL./9.46 L.
87299135
HYDRODEX 3
30 GAL./113.56 L.
Limited Slip Additive
For driving axle differentials
This additive is specially formulated to help reduce clutch plate friction in TG tractor MFD axles.
It’s designed for driving axles equipped with limited slip differentials (where recommended).
» Reduces clutch plate friction and eliminates clutch chatter
» Facilitates application and release of clutch plates
Part No.
product
Container size
87299132
LTD SLIP ADDITIVE
1 PT./.47 L.
Axle Oil Additive
Developed for use with Mastertran,™ this axle oil additive is designed to enhance Mastertran’s
thermal characteristics in severe-temperature applications, and to help reduce brake and clutch
noise in tractors, combines, loader backhoe rear axles, loader backhoe transaxles and forklift
non-steer drive axles. Add 1 pint of additive to each 7.5 gallons of Mastertran.
CAUTION: This oil additive is NOT recommended for use in fluids other than Mastertran.
12
Part No.
product
Container size
402982a2
LTD SLIP ADDITIVE
1 PT./.47 L.
GREASE
GR-9 Multi-Purpose Grease (MAT-3550)
GR-9 is a general-purpose NLGI 2, lithium-soap, extremepressure grease for use in agricultural, construction and industrial
equipment. It’s designed for use in antifriction and plain bearings
(including nondisc brake wheel bearings), universal joints, spline
shafts, water pumps and general chassis lubrication.
Part No.
product
Container size
9613310
GR-9 GREASE
TUBE
87298944
GR-9 GREASE
35 LBS./15.9 L.
87298945
GR-9 GREASE
120 LBS./54.5 L.
Part No.
product
Container size
9861804DS
HI-TEMP grease
TUBE
Part No.
product
Container size
73340211
MOLY GREASE
TUBE
87298946
MOLY GREASE
35 LBS./15.9 L.
87298947
MOLY GREASE
120 LBS./54.5 L.
Hi-Temp EP Grease (MAT-3550)
New Holland Hi-Temp EP Grease is a multipurpose NLGI 2,
GC-LB high-temperature, lithium-complex, extreme-pressure
grease for use in agricultural, construction, automotive and
industrial equipment. It’s designed for use in conventional and
disc brake wheel bearings, universal joints, spline shafts, water
pumps and general chassis lubrication.
Moly Grease GR-75 (MAT-3550)
GR-75 is a specially formulated, lithium-soap, extreme-pressure
grease containing molybdenum disulfide. It’s designed for
heavy-duty use in construction, industrial and agricultural
equipment. It provides protection from extreme loads, shock
loading or slow speed conditions.
Synthetic Grease GR-1000 SSL (MAT-3550)
GR-1000 SSL is a synthetic-based, NLGI 2, GC-LB, extremepressure grease for use in agricultural, construction, automotive
and industrial equipment. It’s designed for use in conventional
and disc brake wheel bearings, universal joints, spline shafts,
water pumps and general chassis lubrication. It provides
excellent low- and high-temperature performance.
Part No.
product
Container size
87299163
SYNTHETIC GREASE
TUBE
13
filtration products
LUBE FILTRATION
To meet the performance demands of today’s tough off-road
environments, your equipment is generating more usable horsepower than ever before. Tighter tolerances, higher temperatures
and severe duty cycles are driving the requirement for highquality filtration and increased durability without sacrificing
filter life. Today’s low-emission engine designs make engine
filtration extremely critical, especially particles in the 5- to 10micron range, which are most damaging to modern engines.
While the costs for repairing equipment breakdowns are
normally high, they are often miniscule compared to those
associated with delayed harvests or missed project completion
deadlines. Don’t jeopardize productivity by using “will-fit”
filtration. CNH Original Parts lube filters are designed
specifically for your equipment. They’re guaranteed to ensure
peak performance while providing maximum protection for
your investment.
Optimized filtration performance in capacity (life), efficiency (cleanliness) and restriction to flow:
1
SUPERIOR MEDIA
Our filters are designed to trap more of the small contaminants that are
most damaging to diesel engines. The media is uniformly resin-impregnated
and heat-cured to provide efficient filtration, while resisting the effects of
moisture. The media used in many of our newer filters combine microglass
and cellulose fibers for doubled efficiency over standard filters.
2
Stacked DisC
This custom-designed filtration media is 70% more efficient than cellulose
or paper media in filtering the 5- to 15-micron size contaminants.
3
HOT MELT
Our filters use hot melt — a high-quality adhesive — to uniformly bond the
filter element to the end caps. Plastisol adhesive keeps the filter media from
bunching and rupturing.
4
R UBBER SEALS
Many filter manufacturers use cardboard seals at the ends of the filters;
cardboard seals can deteriorate or leak. Our filters use a thin piece of rubber
that provides a tight, even seal at the base of the filter. It prevents unfiltered
oil from bypassing the filter media and re-entering your system.
5
METAL END CAPS AND CENTER TUBES
Solid metal components provide additional strength to the filter element.
Metal is superior to the cardboard that many manufacturers use.
2
1
3
5
4
OEM Specified.
Our filters meet all New Holland specifications. When you buy a CNH Original Parts
filter, you’re buying the confidence that New Holland engineers have placed in the
filter to protect your engine and save you repair costs.
14
ULTRA FILTERS WITH MICROLOC® MEDIA
Our Ultra filters with MicroLoc®
media represent the next generation of
filtration, designed specifically to deliver
optimum efficiency without loss of
filter life. Extensive laboratory research
and thousands of hours of field tests
have been dedicated to developing
MicroLoc media. The individual
components of Ultra filters have been
designed for high performance and
durability through countless severe duty
cycles. These efforts have resulted in
a premium filtration product line that
provides an outstanding competitive
difference and superior system
protection designed specifically for
your New Holland equipment.
For Dirt, Dust And Debris,
This Is The End Of The Line.
Competitive
Media
MICROLOC
®
Media
Each layer of MicroLoc is made from
continuous polymeric fibers that vary in
diameter to provide superior filtration,
durability and filter life not available in
traditional media.
By using Ultra filters with MicroLoc® media, your engine systems will receive the best filtration performance available today.
Your filters will remove the small, high wear-causing particles from the minute they are installed until the minute they are
removed. Other filter manufacturers may claim to provide superior protection, but there is nothing that protects your equipment
like CNH Original Parts Ultra filters with MicroLoc.
15
filtration products
Fuel Filtration
Few things will impact your productivity faster than a poor
quality fuel filter. Fine filtration, long life and efficient water
removal are vital to keeping your equipment in the field and
on the job.
CNH Original parts fuel filters:
Sure, there are other filters on the market today that will
fit your engine, but there is only one line that’s designed
specifically for your New Holland equipment. These fuel filters
are guaranteed to provide maximum protection for your
engine’s high-performance injectors and fuel pump systems.
The extremely high injection pressures and small injector
orifices in today’s 10W-emissions engines make fuel filters
more critical than ever. Demand the best protection for your
equipment investment. Demand CNH Original Parts filtration.
» Higher efficiency without loss of capacity
» Patented self-venting drain valve on fuel/water separators
» Proprietary media
» Better injection protection
» Dramatically improved removal of both free and emulsified water
» Increased service life
I t doesn’t take much dirt to clog a fuel system — and
you work in a lot of dirt. Choose the best protection.
16
Hydraulic FiltratioN
High-performance synthetic media has become increasingly
common in our hydraulic and transmission filters. This media
provides maximum protection against wear, longer filter life and
less pressure drop compared to conventional media. As today’s
applications are even more demanding, the need for this highperformance synthetic media is even more important. That’s
why our hydraulic filters are synthetic, delivering the optimum
balance of efficiency, capacity and pressure drop.
Advantages include:
» Lower pressure drop
» Customized efficiency for application
» Complete system design, head and filter
» Exact replacement each and every time
» Maximum dirt-holding capacity (longer service life)
» Greater temperature operating range
» Compatibility with new synthetic and
environmentally friendly oils
» Premier o-ring seal
» Continuous element quality control testing:
• Multipass
• Pressure fatigue
• Pressure drop
• Vibration
• Baffle torque
• Burst element collapse
• Element cleanliness
capacity
filter
(grams)
competitor
cnh
130
193
cnh
advantage
avg. pressure
at failure
48%
greater
capacity
189
(psid)
239
cnh min.
spec
cnh
advantage
200
26%
stronger
(psid)
*Results from a field test of CNH Original Parts filter (87413809) versus a competitive filter.
Dirt Loading Test ISO 16889. Media Rupture Test ISO 2941.
17
filtration products
Air Filtration
Your engine is equipped with an air cleaner housing with filter
elements, integral precleaner and intake ducting. All perform
a certain function. For example, the intake ducts deliver air
to the precleaner, which takes out 75-94% of the heavy,
coarse dust, before air reaches the primary element in the air
cleaner housing. Dust that reaches the primary element has a
far greater chance of entering your engine if you’re not using
genuine CNH Original Parts filters.
Our filters offer the following advantages:
»Highest efficiency product available
»Designed and supplied as a complete system
»Exact replacement each and every time
»Continuous element media
» Quality control testing for:
• Efficiency
• Wet and dry strength
• Burst strength
»Pleatloc® media spacing for improved loading/field life
»Deeper end covers for more effective potting of media
»Urethane seals and molded-in-place gaskets
»Advanced Radialseal® for a leak-free seal
in rough conditions
»Improved contaminant encapsulation – dust and dirt
won’t dislodge during service
ACTIVATED CARBON FRESH AIR CAB FILTERS
When working in the field, visibility and air quality can impact
an operator’s performance and health. These combination
dust and odor filters provide the ultimate in contamination
filtration and are the only ones that New Holland Engineering
has approved for use with New Holland equipment.
18
»Activated carbon-impregnated media absorbs odors before
reaching the operator
»Easy to install and remove without modification to
existing housing
»Synthetic media captures dust, pollens and other allergens
without air flow restriction
»No mess – carbon is bonded to the filter media so
there’s no need to add loose carbon refill
FLEETGUARD® FILTERS
Our all-makes filter program offers a comprehensive line of
Fleetguard air, coolant, fuel, hydraulic and lube filtration products
for all vehicle applications. The Fleetguard product line allows us
to offer you a “one-stop shop” for all your filter needs.
more than 5,000 products available:
Fleetguard® features and benefits
»Industrial engines
»Advanced and innovative filtration products
»Meets Original Equipment Manufacturer’s specifications
»24/7 customer assistance and service engineering support
»All brands of agricultural and construction equipment
»Automotive applications
»Lawn equipment
»Motorcycles
»ATVs
»Boats
19
coolant antifreeze
XHD heavy-duty coolant / antifreEZe
Major diesel engine manufacturers estimate that more than 50% of engine failures are cooling system related. Worn rings, scuffed
pistons, cracked heads and corroded bearings may appear to have nothing in common with the cooling system, when in fact, these
problems are often the symptoms of improper cooling system maintenance. Using XHD, a heavy-duty coolant formulated for use with
off-road equipment, will help you avoid premature engine failure.
Premix
also
available
XHD Features and Benefits:
Part No.
product
Container size
» Superior liner cavitation protection
B30204
XHD PREMIX
1 GAL./3.785 L.
B30205
XHD PREMIX
2.5 GAL./9.46 L.
» Long-term corrosion protection for all cooling system metals,
including aluminum, brass, cast iron, steel, solder and copper
B30206
XHD PREMIX
55 GAL./208.19 L.
B30207
XHD PREMIX
330 GAL./1249.2 L.
» Extends water pump life
» Compatible with conventional coolants (mixing or diluting with
nonequivalent coolants will reduce protective properties)
B30201
XHD CONCENTRATE
1 QT./.95 L.
B30202
XHD CONCENTRATE
55 GAL./208.19 L.
B30203
XHD CONCENTRATE
330 GAL./1249.2 L.
» Recommended for diesel, gasoline and natural gas engines
» Phosphate free to reduce scale deposits
» Protects against winter and minimizes the chance of summer boilover
» Available in concentrate and 50/50 premix, which contains
demineralized, reverse osmosis-treated water with freeze
protection to -34°F/-37°C
20
Formulated with Bitrex®
This bittering agent reduces
the likelihood of accidental
animal ingestion.
Cheaper products have costlier consequences
As diesel engines operate, vibration of the cylinders creates microscopic bubbles in
the coolant that attach to the cylinder liners. These bubbles can implode with a force
of over 15,000 PSI. This collapse can blast small holes in the cylinder liner. Without
the protection of a heavy-duty coolant, the result is liner cavitation.
Over time, liner cavitation can allow coolant to enter the engine oil. This compromises
the lubrication of the engine oil and results in excess friction, which ultimately leads
to engine failure. Many competitive coolants don’t provide adequate protection against
this. XHD offers superior liner cavitation protection by covering internal parts with an
oxide film that takes the abuse of implosions to avoid premature engine failure.
Imploding bubbles damage liners...
... which can cause cavitation
21
FLUID ANALYSIS
SYSTEMGARD™
YOUR OUNCE OF PREVENTION
Imagine being able to see exactly what’s happening inside an engine,
a gearbox or hydraulic system
Your New Holland equipment is designed to meet your operational needs for many years to come, and chances are you did your homework
before deciding to make your investment. Systemgard Fluid Analysis is a preventive maintenance tool that protects that
investment by providing a picture of both the fluid condition and the internal condition of a component or system without disassembly.
» Extend oil drain intervals – Monitoring the condition of the oil optimizes drain intervals so that you get the most out of the
fluid you’re paying for. Fewer oil changes minimize maintenance costs and maximize uptime.
» Extend equipment life – Monitoring system cleanliness and filtration efficiency allows you to keep your equipment longer and
significantly reduce replacement costs.
» Identify minor problems before they become major failures – State-of-the-art fluid analysis identifies dirt, wear
particles, fuel dilution and coolant – contaminants that can cause catastrophic failure or significantly shorten equipment life.
» Maximize asset reliability – Testing and analysis ensures that units are up, running and making money.
» I ncrease resale value – Analysis results provide valuable sampling histories that easily justify higher equipment resale values.
WHY SYSTEMGARD?
Systemgard laboratories are ISO 17025 A2LA
accredited – the highest level of quality attainable
by a testing laboratory backed by the most stringent
accrediting body in the industry. This means, with
Systemgard, you can be confident that the results
you receive are accurate, repeatable and traceable
to a superior standard.
» Each
test report provides severity codes and
troubleshooting recommendations
» Severe
findings are communicated immediately via
phone, fax or e-mail
» R esults are available through Horizon online almost
immediately after sample processing is complete
22
TAKING SAMPLES
Using Systemgard Fluid Analysis for regular sampling and Trend
Analysis (monitoring test data over an extended period of time)
will provide the information you need to continually maximize asset
reliability and, ultimately, increase company profits.
Samples should be taken while the systems are operating under
normal conditions or immediately after shutdown while they are still
at operating temperature. Samples should also be taken at regularly
scheduled intervals and from the same sampling point each time.
Oil sample kits
Kits provide advanced diagnostic, preventive
maintenance testing designed to evaluate lubricant
condition, component wear and contamination in
engines, hydraulic systems and transmissions.
OIL Test Packages
Application
Part Number
Engines
Hydraulics
CC2735QS
CC2736QS
•
•
•
•
•
Test
24 Metals by ICP
% Fuel Dilution
% Soot
Water by Crackle
•
•
•
Viscosity @ 40°C
Oxidation/Nitration by FTIR
Particle Count
•
(Gearboxes receive Direct
Read Ferrography)
Fuel sample kits
Evaluate the quality of fuel in your equipment and
storage tanks to minimize mechanical problems due
to fuel contamination, avoid unnecessary or incorrect
repairs, and improve maintenance scheduling.
Fuel Test Packages
Kit Package
Advanced
Diesel Fuel Kit
Diesel Fuel
Cleanliness Kit
Microbe
Test Kit
Part Number
SGDF1
SGDF2
SGDF3
Test
Elemental Metal by ICP
Particle Count
Sulfur
Water by Carl Fischer, ppm
Bacteria, Fungi and Mold
Cetane Index
Distillation
API Gravity
Flash Point
Thermal Stability
•
•
•
•
•
•
•
•
•
•
•
•
•
•
23
PM-15171
© 2010 CNH America LLC. CNH and New Holland are registered trademarks of CNH America LLC.
Any trademarks referred to herein, in association with goods and/or services of companies other than CNH America LLC, are the property of
those respective companies. All rights reserved. Printed in USA.
www.newholland.com
Sold and Serviced By: