Monitores TFT para reemplazo de pantallas CRT.

Transcription

Monitores TFT para reemplazo de pantallas CRT.
Monitores TFT para reemplazo de pantallas CRT.
Los monitores de tubo CRT ya están desapareciendo del mercado,
Monitores Industriales, les ofrece pantallas TFT para instalar en cualquier
máquina herramienta o instrumento de medición.
•
Marcas ya estudiadas.
•
ABB
*
IRD
•
Amada
*
Krauss Maffei
•
Arburg
*
LVD
•
Bailey
*
Norcontrol
•
Barco
*
NUM
•
Charmilles
*
Schenk
•
Fanuc
*
Siemens
•
Ferranti
*
Sperry
•
Fisher
*
Store
•
Foxboro
*
Terasaki
•
Gildemeister
*
Valmet
•
Heidelberg
*
Vaughan
•
Heidenhain
*
Westinghouse
•
Honeywell
… y muchos más.
Nuestros chasis y monitores TFT aceptan desde 15
Khz. de Frecuencia Horizontal hasta 60 Khz. según
modelos. Consúltenos sus necesidades y le proporcionaremos la solución idónea.
.
MONITORES PLANOS
29LW10 SERIES
MONITORES EN CHASIS DE 8.4"
REEMPLAZO DE CRT.
• Dimensiones para chasis de CRT de 10"
• CGA/EGA/VGA o VGA/SVGA
• Programable para señales antiguas.
• Operación a 110/230Vac o 12/24Vdc.
• Apantallado EMC para requerimientos
CE.
• La pantalla lleva ajuste de tilt y altura.
• Empaquetado económico y conservador
medioambiental.
• Pantalla táctil opcional.
• Controles remotos OSD opcionales.
La serie de monitores LCD industriales 29LW10 ha sido diseñada como reemplazo de los monitores de 10” de
CRT. Fácil integración en un amplio rango de instrumentación de medida e interfases Hombre-Maquina es una
clave en el diseño. Este chasis está diseñado para aceptar cabezas estándar de monitor de KME.
Se suministra en formato FLAT-PACK para minimizar costos de empaquetado y envío y es fácil de montar.
Tornillos de fijación en la base y orificios de montaje proporcionan la máxima flexibilidad usando las
posiciones de montaje del chasis de CRT existentes.
Se ofrecen dos tipos de monitor:
Serie 51UN para señales antiguas o no estándar (reemplaza a la serie KME CRT 26S10M )
Serie 61M para estándar VGA/SVGA (reemplaza a la serie KME CRT 26S10MA38H series)
Nº de pieza
Área active de la pantalla
Brillo
Vida estimada de la lámpara
Entradas de Video.
Tipo/nivel Sincronismo
Conectores entrada
Opción ajuste cables 9D & BNC
Opción PAL/NTSC
Barrido Horizontal.
Barrido Vertical.
Voltage alimentación
Opcional 12Vdc o 24Vdc
Consumo (approx.)
Dimens. (An x Al x Fo) approx.
Color cubierta frontal
29LW10SERIES_MI.DOC
Señales antiguas 15kHz -SVGA
Estándard VGA
29LW10A51UN
29LW10MA38H
170.4 x 127.8mm
400cd/m2
50,000 hours
Analógico RGB 0.7Vp-p
Analógico RGB 0.7Vp-p
TTL RGB > 2.75Vp-p
Separado H&V (+/-ve) TTL
Separado H&V (+/-ve) TTL
Compuesto/Mezclado (-ve) TTL
Sync-on-Green (-ve) 0.3V
BNC x 5 + 9D
Si
DSUB15
No
Si
15kHz – 60kHz.
40 – 100Hz.
110/230Vac
30 – 48kHz.
60 – 70Hz.
110/230Vac
Si
30W max.
25W max.
249 x 196 x 248
Gris
Gris
SERIE 29LW10
MONITOR LCD EN CHASIS, PANTALLA DE 8.4"
PARA REEMPLAZO DE CRT DE 10”
5.2
REAR VIEW
4.0
Picture Controls
Signal Inputs*
249.0
255.1
Active Area=
170.4x127.8mm
FRONT VIEW
*Where Fitted
29LW10SERIES_MI.DOC
SIDE VIEW
All dimensions in millimetres
(Not to scale)
FLAT PANEL MONITORS
29LW12 SERIES
12.1" LCD CHASSIS MONITORS
CRT Monitor Replacements
• 12" CRT Chassis Monitor dimensions
• CGA/EGA/VGA or VGA/SVGA compatible
• Programmable for Legacy signals
• 110/230Vac or 12/24Vdc operation
• EMC Shielded for CE requirements
• Screens are Tiltable and Height-adjustable
• Environmentally friendly Flatpack chassis
• Optional Touchscreen Integration
• Optional Remote OSD controls
The 29LW12 series of Industrial LCD monitors has been designed as replacement for 12" CRT monitors. Ease
of integration into a wide range of Measurement, Instrumentation and Human-Machine interface applications
has been a key consideration. The simple chassis is designed to accept standard LCD Monitor Heads of KME. It
is supplied in Flatpack form to minimise packing & shipping costs, and is easy to assemble. Base plate fixings
and holes give maximum flexibility using existing CRT chassis mounting positions.
Two LCD monitor types are offered: 51UN series for Legacy/Non-Standard signals (replaces KME CRT
27S12DM series) and 61M series for standard VGA/SVGA. (replaces KME CRT 26S12M and 12MA series)
Legacy signals 15kHz -VGA
Standard VGA/SVGA
29LW123A51UN
29LW121A61M
246 x 184.5mm
350cd/m2
50,000 hours
Analog RGB 0.7Vp-p
Analog RGB 0.7Vp-p
TTL RGB > 2.75Vp-p
Separate H&V (+/-ve) TTL
Separate H&V (+/-ve) TTL
Composite/Mixed (-ve) TTL
Sync-on-Green (-ve) 0.3V
Part Nr
Active Display Area
Brightness
Backlight Life
Video Inputs
Sync. Type/Level
Input Connectors
Video Termination (Loop-thru)
PAL/NTSC Options
Horizontal Scan Freqy.
Vertical Scan Freqy.
Input Voltage
Optional 12Vdc or 24Vdc
Power Consumption (approx.)
Dimensions (W x H x D)
Front Cover Standard Colour
BNC x 6 + 9D + DSUB15
Yes
DSUB15
No
Yes
15kHz – 60kHz.
40 – 100Hz.
110/230Vac
30 – 48kHz.
60 – 70Hz.
110/230Vac
Yes
30W max.
25W max.
294 x 251 x 292 approx.
Black
Due to a policy of continuous product development KME reserves the right to change specifications
and descriptions without prior notification. All trade marks acknowledged. 29lw121series1 03/2005
Grey
29LW12 SERIES
12.1" LCD MONITOR.
(12" CRT replacement)
FRONT VIEW
TOP VIEW
294.0
88.5
Power supply
& Bracket.
Note 1
132.0 Ctr at 90°
271.0
Active Area = 246x184.5
72.5 Max
250.9 at 90°
Notes:
1. Power Supply & Bracket
supplied separately
2.Chassis Supplied as Flatpack.
(Screws to be secured in chosen position)
160.0
292 Max
30.4
30.0
° Ma
x
All dimensions in millimetres
(Not to scale)
REAR VIEW
SIDE VIEW
29lw12series2
06/2005
FLAT PANEL MONITORS
29LW14 SERIES
TFT-for-CRT CHASSIS MONITORS
CRT Monitor Replacements
• Para reemplazar a monitor de CRT de 14"
• Usa un panel TFT de 12.1” .
• Compatible CGA/EGA/VGA/SVGA
Programable para señales antiguas.
• Operación a 110/230Vac o 12/24Vdc.
• Tilt ajustable 0o / 5o / 10o / 15o
• Vidrio reforzado para protección del TFT
(opción sin protección TFT & sin cubierta
frontal– Serie 10NA)
• Controles OSD remotos opcional.
La serie de monitores LCD industriales 29LW14 ha sido diseñada como reemplazo de los monitores de 14” de
CRT. Fácil integración en un amplio rango de instrumentación de medida e interfases Hombre-Maquina es una
clave en el diseño. Emplea el monitor KME TFT 29LM123(78UN) de 12.1” fijo en un chasis abierto.
Tornillos de fijación en la base y orificios de montaje proporcionan la máxima flexibilidad usando las
posiciones de montaje del chasis de CRT existentes.
Se ofrecen dos tipos de monitor:
Serie 14A para protección total del panel TFT y alta protección EMC.
Serie 14NA para bajo costo, sin cristal de seguridad no cubierta.
Nº de Pieza
Cristal de seguridad
Color cubierta frontal
Área active de la pantalla
Area de tubo 14” (tipica)
Brillo
Vida estimada de la lampara
Entradas de Video.
Tipo/nivel Syncronismo
Señales antiguas 15kHz -SVGA
29LW14A71UN
29LW14NA71UN
Si
No
Negro
No lleva
246 x 184.5mm
260 x 195mm ( Mirar nota inferior)
400cd/m2
50,000 hours
Analógico RGB 0.7Vp-p
TTL RGB > 2.75Vp-p con cable Adaptador
Separado H&V (+/-ve)
TTL Compuesto/Mezclado (-ve) TTL
Sync-on-Green (-ve) 0.3V
Conectores entrada
BNC x 6 + 15D
Barrido Horizontal.
15kHz – 60kHz.
Barrido Vertical.
40 – 100Hz.
Voltage alimentación
110/230Vac
Opcional 12Vdc o 24Vdc
Si
Consumo (approx.)
30W max.
Note 1: La pantalla de tamaño 12,1 es más pequeña que la de 14”. Esta es la opción más segura. Se pueden
suministrar MONITORES TFT de 15” pero pueden ser mas grandes y no adaptarse en el espacio del CRT.
29LW14 SERIES
12.1" LCD FOR 14" CRT REPLACEMENT
CHASSIS MONITOR
28.5
32.0
REAR VIEW
TOP VIEW
21.4 Slot Centres
280.0
293.0
Picture Controls
Signal Inputs*
*Where Fitted
345.8
340.0
63.5
151.5
276.5
35.5 Slot Centres
344.1
0° to 15° Adjustable
14"=270.2
14"=137.0 at 90°
Active Area= 246x184.5
FRONT VIEW
SIDE VIEW
All dimensions in millimetres
(Not to scale)
FLAT PANEL MONITORS
29LW17X SERIES
TFT-for-CRT CHASSIS MONITORS
CRT Monitor Replacements
• 17” CRT Chassis Monitor dimensions
• Uses 15.0” TFT Panel
• CGA/EGA/VGA/SVGA/XGA compatible
•
•
•
•
Programmable for Legacy signals
110/230Vac or 12/24Vdc operation
Adjustable Tilt Positions 0o / 5o / 10o / 15o
Toughened Safety Glass for TFT protection
(option of unprotected TFT panel – 17NAX
series)
• Optional Remote OSD controls
The 29LW17X series of Industrial LCD monitors has been designed as replacement for 17” CRT monitors.
Ease of integration into a wide range of Measurement, Instrumentation and Human-Machine interface
applications has been a key consideration. It uses KME’s 29LM153(78UN) series of Minimum Width 15.0”
TFT monitors fixed to an Open-frame chassis. Base plate fixings and holes have been designed to pick up on
the original CRT chassis mounting positions. .
Two LCD monitor types are offered: 17AX series for full protection of the TFT panel and best EMC
performance; 17NAX series for lowest cost – no Safety Glass or Front Cover.
Part Nr
Safety Glass Fitted
Front Cover Standard Colour
Active Display Area
17” CRT Display Area (typical)
Brightness
Backlight Life
Video Inputs
Sync. Type/Level
Input Connectors
Horizontal Scan Freqy.
Vertical Scan Freqy.
Input Voltage
Optional 12Vdc or 24Vdc
Power Consumption (approx.)
Legacy signals 15kHz -XGA
29LW17AX71UN
29LW17NAX71UN
Yes
No
Black
None
304 x 228mm
300 x 225mm
250cd/m2
50,000 hours
Analog RGB 0.7Vp-p
TTL RGB > 2.75Vp-p via Adapter cable
Separate H&V (+/-ve) TTL
Composite/Mixed (-ve) TTL
Sync-on-Green (-ve) 0.3V
BNC x 5 + 15D
15kHz – 60kHz.
40 – 100Hz.
110/230Vac
Yes
30W max.
Due to a policy of continuous product development KME reserves the right to change specifications
and descriptions without prior notification. All trade marks acknowledged. 29lw17Xseries1 03/2006
29LW17X(71UN) SERIES
15.0” LCD MONITOR FOR 17” CRT REPLACEMENT
REAR VIEW
21.4 Slot Centres
TOP VIEW
M5 Fixing Slots
280.0
293.0
(5xBNC+1x15D) Signal inputs
69.0
104.0
192.0
317.0
35.5 Minimum Slot Length
Display Centre
161.4 at 90°
296.2
0° - 15° Adjustable
SIDE VIEW
FRONT VIEW
All dimensions in millimetres
(Not to scale)
29lw17x(71un)2
Kent Modular Electronics Limited
611 Maidstone Road, Rochester, Kent ME1 3QL, UK
Tel: +44 (0) 1634 830123 Fax: +44 (0) 1634 830619
E-mail: [email protected] URL: http://www.kme.co.uk
03/2006
29LW17NX(71UN) SERIES
15.0” LCD MONITOR FOR 17” CRT REPLACEMENT.
(No Protection Glass or Front Cover)
REAR VIEW
21.4 Slot Centres
TOP VIEW
M5 Fixing Slots
280.0
293.0
(5xBNC+1x15D) Signal inputs
69.0
104.0
192.0
317.0
35.5 Minimum Slot Length
Display Centre
161.4 at 90°
296.2
0° - 15° Adjustable
SIDE VIEW
FRONT VIEW
All dimensions in millimetres
(Not to scale)
29lw17nx(71un)2
Kent Modular Electronics Limited
611 Maidstone Road, Rochester, Kent ME1 3QL, UK
Tel: +44 (0) 1634 830123 Fax: +44 (0) 1634 830619
E-mail: [email protected] URL: http://www.kme.co.uk
03/2006
FLAT PANEL MONITORS
29LW19 SERIES
TFT-for-CRT CHASSIS MONITORS
CRT Monitor Replacements
• 19"/20" CRT Chassis Monitor dimensions
• CGA/EGA/VGA or VGA/SXGA compatible
•
•
•
•
Programmable for Legacy signals
110/230Vac or 12/24Vdc operation
TFT Panel protected by Toughened Glass
Height-adjustable Head for 19" & 20"
• Rugged Metal Chassis with multiple fixings
• Optional Touchscreen Integration
• Optional Remote OSD controls
The 29LW19 series of Industrial LCD monitors has been designed as replacement for 19" & 20" CRT
monitors. Ease of integration into a wide range of Measurement, Instrumentation and Human-Machine interface
applications has been a key consideration. The simple chassis is designed for lowest cost using 19.0" TFT
panels in an open-frame construction. Base plate fixings and holes have been designed to pick up on the original
CRT chassis mounting positions. The monitor’s head can be height-adjusted to suit the display centre point of
the original CRT. Set up is via rear mounted OSD controls.
Two LCD monitor types are offered: 51UN series for Legacy/Non-Standard signals (replaces KME CRT
27S19DMA01 & 27S20DMA01 series) and 61M series for standard VGA/SXGA. (replaces 27S19DMB01
series)
Legacy signals 15kHz -VGA
Standard VGA/SVGA
Part Nr
29LWC19DMA01
29LWC19DMB01
Active Display Area
376 x 301mm
Brightness
250cd/m2
Backlight Life
50,000 hours
Video Inputs
Analog RGB 0.7Vp-p
Analog RGB 0.7Vp-p
TTL RGB > 2.75Vp-p
Sync. Type/Level
Separate H&V (+/-ve) TTL
Separate H&V (+/-ve) TTL
Composite/Mixed (-ve) TTL
Sync-on-Green (-ve) 0.3V
Input Connectors
Video Termination (Loop-thru)
PAL/NTSC Options
Horizontal Scan Freqy.
Vertical Scan Freqy.
Input Voltage
Optional 12Vdc or 24Vdc
Power Consumption (approx.)
Dimensions (W x H x D)
Front Cover Standard Colour
BNC x 5 + 9D + DSUB15
Yes
DSUB15
No
Yes
15kHz – 80kHz.
40 – 100Hz.
110/230Vac
30 – 48kHz.
60 – 70Hz.
110/230Vac
Yes
50W max.
50W max.
H360 x W447 x D348 mm approx.
Grey
Grey
Due to a policy of continuous product development KME reserves the right to change specifications
and descriptions without prior notification. All trade marks acknowledged. 29lw19series1 10/2005
29LW19 SERIES
19" LCD FOR 19"/20" CRT REPLACEMENT
CHASSIS MONITOR
TOP VIEW
REAR VIEW
173.4
FRONT VIEW
205.2
287.7
319.5
Display Ctr 20"=193.1
Display Ctr 19"=184.5
Maximum Height 19"=360.0
Maximum Height 20"=369.0
447.0
430.0
Active Area = 376.3x301.0
377.0
434.0
71.7
SIDE VIEW
All dimensions in millimetres
(Not to scale)
347.4
29lw19series2
09/2005
.
MONITORES PLANOS
29LW10 SERIES
MONITORES EN CHASIS DE 8.4"
REEMPLAZO DE CRT.
• Dimensiones para chasis de CRT de 10"
• CGA/EGA/VGA o VGA/SVGA
• Programable para señales antiguas.
• Operación a 110/230Vac o 12/24Vdc.
• Apantallado EMC para requerimientos
CE.
• La pantalla lleva ajuste de tilt y altura.
• Empaquetado económico y conservador
medioambiental.
• Pantalla táctil opcional.
• Controles remotos OSD opcionales.
La serie de monitores LCD industriales 29LW10 ha sido diseñada como reemplazo de los monitores de 10” de
CRT. Fácil integración en un amplio rango de instrumentación de medida e interfases Hombre-Maquina es una
clave en el diseño. Este chasis está diseñado para aceptar cabezas estándar de monitor de KME.
Se suministra en formato FLAT-PACK para minimizar costos de empaquetado y envío y es fácil de montar.
Tornillos de fijación en la base y orificios de montaje proporcionan la máxima flexibilidad usando las
posiciones de montaje del chasis de CRT existentes.
Se ofrecen dos tipos de monitor:
Serie 51UN para señales antiguas o no estándar (reemplaza a la serie KME CRT 26S10M )
Serie 61M para estándar VGA/SVGA (reemplaza a la serie KME CRT 26S10MA38H series)
Nº de pieza
Área active de la pantalla
Brillo
Vida estimada de la lámpara
Entradas de Video.
Tipo/nivel Sincronismo
Conectores entrada
Opción ajuste cables 9D & BNC
Opción PAL/NTSC
Barrido Horizontal.
Barrido Vertical.
Voltage alimentación
Opcional 12Vdc o 24Vdc
Consumo (approx.)
Dimens. (An x Al x Fo) approx.
Color cubierta frontal
29LW10SERIES_MI.DOC
Señales antiguas 15kHz -SVGA
Estándard VGA
29LW10A51UN
29LW10MA38H
170.4 x 127.8mm
400cd/m2
50,000 hours
Analógico RGB 0.7Vp-p
Analógico RGB 0.7Vp-p
TTL RGB > 2.75Vp-p
Separado H&V (+/-ve) TTL
Separado H&V (+/-ve) TTL
Compuesto/Mezclado (-ve) TTL
Sync-on-Green (-ve) 0.3V
BNC x 5 + 9D
Si
DSUB15
No
Si
15kHz – 60kHz.
40 – 100Hz.
110/230Vac
30 – 48kHz.
60 – 70Hz.
110/230Vac
Si
30W max.
25W max.
249 x 196 x 248
Gris
Gris
SERIE 29LW10
MONITOR LCD EN CHASIS, PANTALLA DE 8.4"
PARA REEMPLAZO DE CRT DE 10”
5.2
REAR VIEW
4.0
Picture Controls
Signal Inputs*
249.0
255.1
Active Area=
170.4x127.8mm
FRONT VIEW
*Where Fitted
29LW10SERIES_MI.DOC
SIDE VIEW
All dimensions in millimetres
(Not to scale)
FLAT PANEL MONITORS
29LW12 SERIES
12.1" LCD CHASSIS MONITORS
CRT Monitor Replacements
• 12" CRT Chassis Monitor dimensions
• CGA/EGA/VGA or VGA/SVGA compatible
• Programmable for Legacy signals
• 110/230Vac or 12/24Vdc operation
• EMC Shielded for CE requirements
• Screens are Tiltable and Height-adjustable
• Environmentally friendly Flatpack chassis
• Optional Touchscreen Integration
• Optional Remote OSD controls
The 29LW12 series of Industrial LCD monitors has been designed as replacement for 12" CRT monitors. Ease
of integration into a wide range of Measurement, Instrumentation and Human-Machine interface applications
has been a key consideration. The simple chassis is designed to accept standard LCD Monitor Heads of KME. It
is supplied in Flatpack form to minimise packing & shipping costs, and is easy to assemble. Base plate fixings
and holes give maximum flexibility using existing CRT chassis mounting positions.
Two LCD monitor types are offered: 51UN series for Legacy/Non-Standard signals (replaces KME CRT
27S12DM series) and 61M series for standard VGA/SVGA. (replaces KME CRT 26S12M and 12MA series)
Legacy signals 15kHz -VGA
Standard VGA/SVGA
29LW123A51UN
29LW121A61M
246 x 184.5mm
350cd/m2
50,000 hours
Analog RGB 0.7Vp-p
Analog RGB 0.7Vp-p
TTL RGB > 2.75Vp-p
Separate H&V (+/-ve) TTL
Separate H&V (+/-ve) TTL
Composite/Mixed (-ve) TTL
Sync-on-Green (-ve) 0.3V
Part Nr
Active Display Area
Brightness
Backlight Life
Video Inputs
Sync. Type/Level
Input Connectors
Video Termination (Loop-thru)
PAL/NTSC Options
Horizontal Scan Freqy.
Vertical Scan Freqy.
Input Voltage
Optional 12Vdc or 24Vdc
Power Consumption (approx.)
Dimensions (W x H x D)
Front Cover Standard Colour
BNC x 6 + 9D + DSUB15
Yes
DSUB15
No
Yes
15kHz – 60kHz.
40 – 100Hz.
110/230Vac
30 – 48kHz.
60 – 70Hz.
110/230Vac
Yes
30W max.
25W max.
294 x 251 x 292 approx.
Black
Due to a policy of continuous product development KME reserves the right to change specifications
and descriptions without prior notification. All trade marks acknowledged. 29lw121series1 03/2005
Grey
29LW12 SERIES
12.1" LCD MONITOR.
(12" CRT replacement)
FRONT VIEW
TOP VIEW
294.0
88.5
Power supply
& Bracket.
Note 1
132.0 Ctr at 90°
271.0
Active Area = 246x184.5
72.5 Max
250.9 at 90°
Notes:
1. Power Supply & Bracket
supplied separately
2.Chassis Supplied as Flatpack.
(Screws to be secured in chosen position)
160.0
292 Max
30.4
30.0
° Ma
x
All dimensions in millimetres
(Not to scale)
REAR VIEW
SIDE VIEW
29lw12series2
06/2005
FLAT PANEL MONITORS
29LW14 SERIES
TFT-for-CRT CHASSIS MONITORS
CRT Monitor Replacements
• Para reemplazar a monitor de CRT de 14"
• Usa un panel TFT de 12.1” .
• Compatible CGA/EGA/VGA/SVGA
Programable para señales antiguas.
• Operación a 110/230Vac o 12/24Vdc.
• Tilt ajustable 0o / 5o / 10o / 15o
• Vidrio reforzado para protección del TFT
(opción sin protección TFT & sin cubierta
frontal– Serie 10NA)
• Controles OSD remotos opcional.
La serie de monitores LCD industriales 29LW14 ha sido diseñada como reemplazo de los monitores de 14” de
CRT. Fácil integración en un amplio rango de instrumentación de medida e interfases Hombre-Maquina es una
clave en el diseño. Emplea el monitor KME TFT 29LM123(78UN) de 12.1” fijo en un chasis abierto.
Tornillos de fijación en la base y orificios de montaje proporcionan la máxima flexibilidad usando las
posiciones de montaje del chasis de CRT existentes.
Se ofrecen dos tipos de monitor:
Serie 14A para protección total del panel TFT y alta protección EMC.
Serie 14NA para bajo costo, sin cristal de seguridad no cubierta.
Nº de Pieza
Cristal de seguridad
Color cubierta frontal
Área active de la pantalla
Area de tubo 14” (tipica)
Brillo
Vida estimada de la lampara
Entradas de Video.
Tipo/nivel Syncronismo
Señales antiguas 15kHz -SVGA
29LW14A71UN
29LW14NA71UN
Si
No
Negro
No lleva
246 x 184.5mm
260 x 195mm ( Mirar nota inferior)
400cd/m2
50,000 hours
Analógico RGB 0.7Vp-p
TTL RGB > 2.75Vp-p con cable Adaptador
Separado H&V (+/-ve)
TTL Compuesto/Mezclado (-ve) TTL
Sync-on-Green (-ve) 0.3V
Conectores entrada
BNC x 6 + 15D
Barrido Horizontal.
15kHz – 60kHz.
Barrido Vertical.
40 – 100Hz.
Voltage alimentación
110/230Vac
Opcional 12Vdc o 24Vdc
Si
Consumo (approx.)
30W max.
Note 1: La pantalla de tamaño 12,1 es más pequeña que la de 14”. Esta es la opción más segura. Se pueden
suministrar MONITORES TFT de 15” pero pueden ser mas grandes y no adaptarse en el espacio del CRT.
29LW14 SERIES
12.1" LCD FOR 14" CRT REPLACEMENT
CHASSIS MONITOR
28.5
32.0
REAR VIEW
TOP VIEW
21.4 Slot Centres
280.0
293.0
Picture Controls
Signal Inputs*
*Where Fitted
345.8
340.0
63.5
151.5
276.5
35.5 Slot Centres
344.1
0° to 15° Adjustable
14"=270.2
14"=137.0 at 90°
Active Area= 246x184.5
FRONT VIEW
SIDE VIEW
All dimensions in millimetres
(Not to scale)
FLAT PANEL MONITORS
29LW17X SERIES
TFT-for-CRT CHASSIS MONITORS
CRT Monitor Replacements
• 17” CRT Chassis Monitor dimensions
• Uses 15.0” TFT Panel
• CGA/EGA/VGA/SVGA/XGA compatible
•
•
•
•
Programmable for Legacy signals
110/230Vac or 12/24Vdc operation
Adjustable Tilt Positions 0o / 5o / 10o / 15o
Toughened Safety Glass for TFT protection
(option of unprotected TFT panel – 17NAX
series)
• Optional Remote OSD controls
The 29LW17X series of Industrial LCD monitors has been designed as replacement for 17” CRT monitors.
Ease of integration into a wide range of Measurement, Instrumentation and Human-Machine interface
applications has been a key consideration. It uses KME’s 29LM153(78UN) series of Minimum Width 15.0”
TFT monitors fixed to an Open-frame chassis. Base plate fixings and holes have been designed to pick up on
the original CRT chassis mounting positions. .
Two LCD monitor types are offered: 17AX series for full protection of the TFT panel and best EMC
performance; 17NAX series for lowest cost – no Safety Glass or Front Cover.
Part Nr
Safety Glass Fitted
Front Cover Standard Colour
Active Display Area
17” CRT Display Area (typical)
Brightness
Backlight Life
Video Inputs
Sync. Type/Level
Input Connectors
Horizontal Scan Freqy.
Vertical Scan Freqy.
Input Voltage
Optional 12Vdc or 24Vdc
Power Consumption (approx.)
Legacy signals 15kHz -XGA
29LW17AX71UN
29LW17NAX71UN
Yes
No
Black
None
304 x 228mm
300 x 225mm
250cd/m2
50,000 hours
Analog RGB 0.7Vp-p
TTL RGB > 2.75Vp-p via Adapter cable
Separate H&V (+/-ve) TTL
Composite/Mixed (-ve) TTL
Sync-on-Green (-ve) 0.3V
BNC x 5 + 15D
15kHz – 60kHz.
40 – 100Hz.
110/230Vac
Yes
30W max.
Due to a policy of continuous product development KME reserves the right to change specifications
and descriptions without prior notification. All trade marks acknowledged. 29lw17Xseries1 03/2006
29LW17X(71UN) SERIES
15.0” LCD MONITOR FOR 17” CRT REPLACEMENT
REAR VIEW
21.4 Slot Centres
TOP VIEW
M5 Fixing Slots
280.0
293.0
(5xBNC+1x15D) Signal inputs
69.0
104.0
192.0
317.0
35.5 Minimum Slot Length
Display Centre
161.4 at 90°
296.2
0° - 15° Adjustable
SIDE VIEW
FRONT VIEW
All dimensions in millimetres
(Not to scale)
29lw17x(71un)2
Kent Modular Electronics Limited
611 Maidstone Road, Rochester, Kent ME1 3QL, UK
Tel: +44 (0) 1634 830123 Fax: +44 (0) 1634 830619
E-mail: [email protected] URL: http://www.kme.co.uk
03/2006
29LW17NX(71UN) SERIES
15.0” LCD MONITOR FOR 17” CRT REPLACEMENT.
(No Protection Glass or Front Cover)
REAR VIEW
21.4 Slot Centres
TOP VIEW
M5 Fixing Slots
280.0
293.0
(5xBNC+1x15D) Signal inputs
69.0
104.0
192.0
317.0
35.5 Minimum Slot Length
Display Centre
161.4 at 90°
296.2
0° - 15° Adjustable
SIDE VIEW
FRONT VIEW
All dimensions in millimetres
(Not to scale)
29lw17nx(71un)2
Kent Modular Electronics Limited
611 Maidstone Road, Rochester, Kent ME1 3QL, UK
Tel: +44 (0) 1634 830123 Fax: +44 (0) 1634 830619
E-mail: [email protected] URL: http://www.kme.co.uk
03/2006
FLAT PANEL MONITORS
29LW19 SERIES
TFT-for-CRT CHASSIS MONITORS
CRT Monitor Replacements
• 19"/20" CRT Chassis Monitor dimensions
• CGA/EGA/VGA or VGA/SXGA compatible
•
•
•
•
Programmable for Legacy signals
110/230Vac or 12/24Vdc operation
TFT Panel protected by Toughened Glass
Height-adjustable Head for 19" & 20"
• Rugged Metal Chassis with multiple fixings
• Optional Touchscreen Integration
• Optional Remote OSD controls
The 29LW19 series of Industrial LCD monitors has been designed as replacement for 19" & 20" CRT
monitors. Ease of integration into a wide range of Measurement, Instrumentation and Human-Machine interface
applications has been a key consideration. The simple chassis is designed for lowest cost using 19.0" TFT
panels in an open-frame construction. Base plate fixings and holes have been designed to pick up on the original
CRT chassis mounting positions. The monitor’s head can be height-adjusted to suit the display centre point of
the original CRT. Set up is via rear mounted OSD controls.
Two LCD monitor types are offered: 51UN series for Legacy/Non-Standard signals (replaces KME CRT
27S19DMA01 & 27S20DMA01 series) and 61M series for standard VGA/SXGA. (replaces 27S19DMB01
series)
Legacy signals 15kHz -VGA
Standard VGA/SVGA
Part Nr
29LWC19DMA01
29LWC19DMB01
Active Display Area
376 x 301mm
Brightness
250cd/m2
Backlight Life
50,000 hours
Video Inputs
Analog RGB 0.7Vp-p
Analog RGB 0.7Vp-p
TTL RGB > 2.75Vp-p
Sync. Type/Level
Separate H&V (+/-ve) TTL
Separate H&V (+/-ve) TTL
Composite/Mixed (-ve) TTL
Sync-on-Green (-ve) 0.3V
Input Connectors
Video Termination (Loop-thru)
PAL/NTSC Options
Horizontal Scan Freqy.
Vertical Scan Freqy.
Input Voltage
Optional 12Vdc or 24Vdc
Power Consumption (approx.)
Dimensions (W x H x D)
Front Cover Standard Colour
BNC x 5 + 9D + DSUB15
Yes
DSUB15
No
Yes
15kHz – 80kHz.
40 – 100Hz.
110/230Vac
30 – 48kHz.
60 – 70Hz.
110/230Vac
Yes
50W max.
50W max.
H360 x W447 x D348 mm approx.
Grey
Grey
Due to a policy of continuous product development KME reserves the right to change specifications
and descriptions without prior notification. All trade marks acknowledged. 29lw19series1 10/2005
29LW19 SERIES
19" LCD FOR 19"/20" CRT REPLACEMENT
CHASSIS MONITOR
TOP VIEW
REAR VIEW
173.4
FRONT VIEW
205.2
287.7
319.5
Display Ctr 20"=193.1
Display Ctr 19"=184.5
Maximum Height 19"=360.0
Maximum Height 20"=369.0
447.0
430.0
Active Area = 376.3x301.0
377.0
434.0
71.7
SIDE VIEW
All dimensions in millimetres
(Not to scale)
347.4
29lw19series2
09/2005
FLAT PANEL MONITORS
29LW081005
8.4" SUNLIGHT READABLE LCD MONITORS
KME Displays
DISPLAY
Type:
No. Colours:
Max. Resolution:
Active Display Area:
Backlight:
Backlight Life:
Brightness:
Contrast Ratio:
Viewing Angles:
VGA/SVGA Displays
AM p-Si Colour TFT
256k
800 x 600 pixels
170.4 x 127.8 mm
High Brightness
CCFL Module
25,000h @ max
brightness
1400 cd/m2 max
350:1 typ
120°H , 105° V
SIGNAL INPUT
Input :
Video:
Input Connector:
Sync. Type/Level:
Multiscan Support:
Horizontal Scan:
Vertical Scan:
Controls:
(On Screen Display )
buttons at rear )
Analog RGB 0.7-1.0Vp-p
15-pin HD Female
Separate H&V (+/-ve) TTL
800 x 600 SVGA
640 x 480 VGA
640 x 350 VGA
640 x 400 VGA
DOS text
30 - 38kHz
56 - 70Hz
Brightness, Contrast,
H/V Position & Size, Clock,
Clock Phase, Colour, Autoset
POWER INPUT
AC Model:
Power Consumption:
Integral AC Power supply
110/230Vac 50/60Hz
40W max
PHYSICAL / ENVIRONMENTAL
Dimensions (approx):
Weight (approx):
Housing:
Operating Temp:
Storage Temp:
195 x 256 x 300mm
2.8Kg
Aluminium
00 to 400 C
-200 to 600 C
PART NUMBERS
Standard Model
29LW081005
•
•
•
•
•
•
•
•
Very High Brightness TFT panel 1400 cd/m2
SVGA ( 800 x 600 pixels ) resolution
P-Si technology has good shock/vibration resilience
Multi position adjustable mounting bracket
Touchscreens easily integrated
Rear controls location & remote control facility
Ambient light sensor facility for automatic brightness
CRT Replacement
The 29LW081005 LCD monitor has been designed for
applications in the ATM field and other users that require a
SVGA compatible monitor for sunlight viewing.
A light sensor input allows the monitor to be viewed
comfortably over a wide range of ambient lighting without
any adjustment.
The monitor has a mounting tray that lets the display be
moved to many different positions, giving maximum
mechanical compatibility with older CRT displays.
Forced air cooling keeps the display cool – especially
important when it is used in direct sunlight.
A full set of OSD push buttons on the rear allows precise
and easy picture adjustment. A remote controls connector is
also included.
Due to a policy of continuous product development KME reserves the right to
change specifications and descriptions without prior notification. All trademarks
acknowledged.
29lw081005-1 08/2004
8.4" HIGH BRITE LCD MONITOR
29LW081005
(CRT Chassis Replacement)
FRONT VIEW
TOP VIEW
246.0 Ctrs
257.0
12mm Long M4 Fixing Slot,
4 Positions.
SIDE VIEW
Power Input
REAR VIEW
All dimensions in millimetres
(Not to scale)
29lw081005-2
08/2004
5.6 (To top of bracket)
5.5
60.4
80.8
130.5
155.5
175.5
Multi Position Adjustable
Bracket, (Drawing shows
0° Tilt Position.)
199.5 Max
252.0
Light Sensor
Signal Input
Remote Connector
Picture Controls
10.8
117.4 Display Ctr
195.0
127.8 (Active Area)
256.5 Max
170.4 (Active Area)
151.6
131.2
81.5
56.5
36.5
Reemplazo de Monitor CRT por Monitor TFT
Comparación:
17DM14AF03 Series
Reemplazado por
19LM151A71UN Series
Dimensiones
mecánicas
Dimensiones pantalla
Resolución
Luminosidad
Rango barrido H.
Rango barrido V.
Conectores
Vídeo analógico:
Sinc. separados H, V.
Sinc. compuestos H &
V.
Sync-on-Green
Vídeo TTL :
17DM14AF03
361W x 338H x 388D mm
260 x 195 mm
SVGA max.
120cd/m² típica
15 – 40kHz
45 – 100Hz.
BNC x 5 + 15D + 9D
19LM151A71UN
388W x 396H* x 188D
mm
304 x 228 mm
XGA max.
250cd/m² típica
15 – 60kHz
40 – 100Hz.
BNC x 5 + 15D
Si
Si
Si
Si
Si
Si (conector 9D)
Si
Requiere cable 9D a
15D**
Requiere Cable:
30PH1224
Requiere Cable:
30PH1241
Requiere Cable:
30PH1224
Si
Gris
Si
110/230Vac
35W max.
Normal (3-bit TTL)
Si
CGA (4-bit TTL)
Si
EGA (6-bit TTL )
Si
Señales entrelazadas
Color
Ajuste de Tilt.
Tensión de entrada.
Consumo
No
Negro
No
110/230Vac
70W max.
TFT.CRT_17DM14AF03_19LM151A71UN_2_MI.DOC
Reemplazo de Monitor CRT por Monitor TFT
Comparación:
17DM19AF03 Series
Reemplazado por
19LM1901A51UN
Series
Dimensiones
mecánicas
Dimensiones pantalla
Resolution
Luminosidad
Rango barrido H.
Rango barrido V.
Conectores
Vídeo analógico:
Sinc. separados H, V.
Sinc. compuestos H &
V.
Sync-on-Green
Vídeo TTL :
Normal (3-bit TTL)
CGA (4-bit TTL)
EGA (6-bit TTL
Señales entrelazadas
Colour
Ajuste de Tilt.
Tensión de entrada.
Consumo
17DM19AF03
454W x 386H x 465D mm
19LM1901A51UN
430W x 430H x 188D mm
350 x 265 mm
SVGA max.
120cd/m² típica
15 – 40kHz
45 – 100Hz.
BNC x 5 + 15D + 9D
376 x 301 mm
SXGA max.
250cd/m² típica
15 – 80kHz
40 – 80Hz.
BNC x 5 + 15D +9D
Si
Si
Si
Si
Si
Si (9D connector)
Si
Si
Si
No
Negro
No
110/230Vac
100W max.
Si
Si (9D connector)
Si
Si
Si
Si
Gris
Si
110/230Vac
50W max.
TFT.CRT_17DM19AF03_19LM1901A51UN_2_MI.DOC
MONITORES PARA REEMPLAZO DE CRT.
SERIE 29LW
MONITORES LCD PARA REEMPLAZO DE CRT
Muchos CRT ya han desaparecido, y esto ha acelerado la
demanda de soluciones de reemplazo usando TFT LCD.
KME tiene capacidad de diseño electrónico y mecánico para
adaptarse a esta demanda. Sus ingenieros han creado
tarjetas A-D TFT que son totalmente flexibles adaptándose a
las señales antiguas de baja resolución, y que proporcionan
señales en pantalla perfectamente resueltas y claras. Los
monitores 29LW han sido diseñados para ocupar el
espesor, de la pantalla CRT que reemplazan, es la facilidad
de instalación lo que es importante.
Forma tamaño y función es el objetivo.
Estos son algunos ejemplos de las soluciones creadas
sustituyendo pantallas CRT con TFT LCD.
TFT 12.1" TFT reemplaza monitor de CRT de 10"
en aplicación de ferrocarril. (PAL/52Vdc)
EJEMPLOS TÍPICOS
TFT de 8.4"
Reemplazo CRT 8.4" Color
Barrido: CGA/EGA/VGA
Señales: TTL RGB / Analógico
Objetivo:
Los chasis Trinitron fueron
muy populares en 1980.
Reemplazo fue muy difícil de
encontrar. Un cliente alemán
solicito una solución, de
tamaño cercano a 210 mm de
ancho.
Resultado :
Modelo Nº: 29LW081006
TFT de 8.4"
Reemplazo CRT 9” mono.
Barrido: 15kHz
Señales: NTSC no-entrelazadas
Objetivo:
Una compañía de instrumentación
Noruega tenía problemas con los
antiguos monitores de 9”. El
espacio era muy justo dentro del
terminal. Se diseño un chasis
especial, incluyendo conectores
para video y power.
Model Nr: 29LW081007
TFT de 19.0"
Reemplazo CRT 21" Color
Barrido: 15kHz
Señales: RGB
Objetivo:
Una compañía de ferrocarriles en UK
no encontraba monitores para
reemplazar a los BARCO 21" en la
salas de control.
KME creó un monitor equivalente
TFT que encajaba exactamente en el
mismo espacio que el monitor
BARCO con superior calidad.
Model Nr: 29LW1901002
Una planta nuclear en UK tenía muchos
analizadores de vibraciones fabricados por
IRD Mechanalysis. Los monitores de 12,1”
15Khz ya no se pueden obtener. KME diseño
un monitor de 12,1 “ TFT para esta señal de
15Khz. El Módulo 29LM123D41UN (izq.)
se monto en un chasis especial que encaja
perfectamente en el sito del CRT
TFT de 10.4"
Reemplazo CRT 12" Color
Barrido: 30kHz
Señales: RGB
Objetivo :
Amada utiliza tubos CRT de 12"
CRT en los terminales Promecam
N.C. que no se pueden obtener.
KME diseño un chasis especial
para adaptar un monitor TFT al
chasis frontal.
Model Nr: 29LW104001