Plastic House PDF

Applications for
Louvers, Lenses and Eggcrate
•
•
•
•
•
•
•
•
POP Displays
Awnings
Elevators
Hospitals
Hotels
Schools
Office Lighting
HVAC
Plastic Industry
Offering the most comprehensive selection for
new and retrofit lighting installations
• LOUVERS
• EGGCRATE
• PRISMATIC LENSES
• WRAPAROUND LENSES
• GLOBES
1400 S. Old Hwy 141 Fenton, MO 63026 USA
V10272014
Fax: 636.600.4108
Phone: 800.248.0224 or 636.600.4084
[email protected]
www.slplighting.com
1400 S. Old Hwy 141 Fenton, MO 63026 USA
www.slplighting.com
Replace the Lens NOT the Fixture!
Eggcrate Louvers
RFK3™ Retrofit any
existing lay-in fixture
into a deep cell
parabolic louver.
Eggcrate is a square configuration of cells with flat cell
walls. The function of eggcrate is to block any view of the
space above while creating a bright area of light.
RFK2™ Retrofit any
existing lay-in fixture
(including 3” deep
aluminum) with a
standard white steel
door frame. 1/2” Frame
will accept any lens,
louver or eggcrate.
T Series: 1/2” x 1/2” x 1/2”
.50”
12,7mm
.50”
12,7mm
Styrene - White
Acrylic - White
1x4, 2x2, 2x4
Old Lens
New Parabolic Louver
1. Unlatch and remove existing door frame
2. Disassemble door frame and remove lens/louver
3. Measure existing lens/louver
4. Factory to cut new lens/louver to fit
5. Install new lens/louver into existing
fixture door frame
Also Available In: 3x4 & 30x60
TC Economy Grade: 1/2” x 1/2” x 3/8”
Styrene - White, Black or Specular Silver
Acrylic - White
.300”
7,6mm
.625”
15,9mm
TC500 Specification Grade: 1/2” x 1/2” x 3/8”
Styrene - White or Black
Acrylic - White
True 1/2” Cell Size
.312”
7,9mm
.50”
12,7mm
Before:
Aluminum Eggcrate
.50”
12,7mm
After:
To Order:
1. Provide critical dimensions, or trace the profile
of the diffuser on a piece of paper.
2. Measure the exact length of the diffuser.
3. Fax or Email Information
.50”
12,7mm
AT: 1/2” cube aluminum
AT1: 1” cube aluminum
1”
25,4mm
Finishes: baked white enamel, mill finish, clear anodized or black enamel. Custom sizes available.
1400 S. Old Hwy 141 Fenton, MO 63026 USA
Phone:
1”
25,4mm
800.248.0224 or 636.600.4084
Fax: 636.600.4108
[email protected]
www.slplighting.com
Replacement Wraparound Lenses
Lenses
A wide selection of replacement wraparound lenses are available.
A lens is a flat sheet of plastic, usually
clear or white. The distribution of the light
is skewed depending on the
pattern of the lens. Random and
uncontrolled distribution creates a bright
area of light. With certain
patterns, the lamp image is reduced.
Outdoor Replacement Lenses
Prismatic Pattern 12: The industry standard 3/16” female prismatic lens.
• Thickness: .100”, .110” or .125”
• Acrylic and Styrene (Polycarbonate Special Order)
• Standard sizes up to 50”x100”
Citadel 1™ Lenses:
Lenses
4 Foot 8 Foot
2.5” Injection Molded Lens
+
2” Vacuum Formed Lens
+
3” Vacuum Formed Lens
Injection Molded Lens:
50”x100”
In Stock
Vacuum Formed Lenses:
+
2.5”
2”
3”
+
Globes & Acorns:
• Polycarbonate
• Acrylic
• Smoked, Clear, White
or Linear Prism
Injection Molded Drop Lens:
• 12” x 12”
• 20” x 20”
Prismatic Pattern 15: The bold 3/8” female prism of Pattern 15 offers
reduced glare and an upgraded appearance.
• Thickness: .200”
• Standard sizes up to 4’x4’
Prismatic Pattern 19: The 3/16” male prism of Pattern 19 offers the lowest
glare of the prismatic lenses.
• Thickness: .156”
• Standard sizes up to 4’x4’
T5HO Tube Guards
T5 HO Tube Guard features an increased size and venting endcaps. The increased size
allows a greater distance of the guard from the hottest point of the lamp near the end
of the lamp. This distance reduces the temperature of the guard material measured at the inside wall of the guard. The T5 HO Tube Guard is suitable for
use with T5 HO lamps in normal operating conditions where the surface
of the lamp does not exceed 200°F.
Translucent Acrylic:
•
•
•
•
Acrylic
Frosted White or Matte Clear
Thickness: .040” or .080”
Standard sizes up to 2’x4’
Cracked Ice:
Tube Guards
•
•
•
•
• Polycarbonate Standard
• To fit T12, T8 or T5 Lamps in 4’ or 8’ Lengths
• Not recommended for T5HO lamps
Styrene
Frosted White or Clear
Thickness: .065”, .070” or .125”
Standard sizes up to 50’x100’
• Special Order Only on color tube guards
1400 S. Old Hwy 141 Fenton, MO 63026 USA
Phone: 800.248.0224 or 636.600.4084
Fax: 636.600.4108
[email protected]
www.slplighting.com
Decorative Louvers
Parasquare Louvers
®
Parabolic Louvers are a square
configuration of cells with parabolic (curved)
cell walls. Their function is to direct light
downward in a controlled manner and
eliminate the view of the light source.
Style 4
Style 1
.400”, 10,2mm
All SLP Parabolic Louvers are available:
Decorona™
.625ì
(Style 1) for Lay-in-Grid or T-Bar Systems.16mm
Louver Features
(Style 4) for Lighting Doorframe Fixtures.
Materials:
• Styrene
• Acrylic
.400”, 10,2mm
P1: Nominal 1/2” x 1/2” x 1/2”
.400”
.625ì10,2mm
.400”,
10,2mm
16mm
.625”
.625ì
16mm
16mm
.400”, 10,2mm
Standard Finishes:
• Specular Silver
• Specular Gold
• Aluma-Lux (Semi-Specular)
• Black
• White
Standard Sizes:
• 2x4
• 2x2
• 1x4
• Special Fabrication Available
.625ì
16mm
.400”, 10,2mm
1.00”
25,4mm
1.50”
38,1mm
Parahex
P2: 1-1/2” x 1-1/2” x 1”
.625ì
16mm
•
•
•
•
•
.400”, 10,2mm
.625ì 10,2mm
.400”,
16mm
.625ì
16mm
.48”
12,2mm
.48”
12,2mm
.75”
.48”19mm
12,2mm
.75”
.75”
19mm
19mm
P3: 3/4” x 3/4” x 1/2”
.400”, 10,2mm
.48”
12,2mm
.75”
.48” 19mm
12,2mm
.625ì
16mm
The Forgiving Finish
.75”
19mm
1.50”
38,1mm
P4: 3” X 3” X 1-1/2”
3”
76,2mm
.35”
9mm
Look Of Aluminum At The Price Of Plastic
Doesn’t Show Fingerprints
No Cave Effect
Will Not Bend Or Dent
Available On Any Slp Plastic Louver Or Eggcrate.
• A Premium Finish For Outstanding Lighting Installations.
• Allows Contaminants Such As Fingerprints Or Dust To Be Wiped Away.
• Available On Any Slp Plastic Louver Or Eggcrate.
P5: 3/4” x 3/4” x 3/8”
.75”
19mm
1400 S. Old Hwy 141 Fenton, MO 63026 USA
Phone: 800.248.0224 or 636.600.4084
Fax: 636.600.4108
[email protected]
www.slplighting.com
Decorative Louvers
Parasquare Louvers
®
Parabolic Louvers are a square
configuration of cells with parabolic (curved)
cell walls. Their function is to direct light
downward in a controlled manner and
eliminate the view of the light source.
Style 4
Style 1
.400”, 10,2mm
All SLP Parabolic Louvers are available:
Decorona™
.625ì
(Style 1) for Lay-in-Grid or T-Bar Systems.16mm
Louver Features
(Style 4) for Lighting Doorframe Fixtures.
Materials:
• Styrene
• Acrylic
.400”, 10,2mm
P1: Nominal 1/2” x 1/2” x 1/2”
.400”
.625ì10,2mm
.400”,
10,2mm
16mm
.625”
.625ì
16mm
16mm
.400”, 10,2mm
Standard Finishes:
• Specular Silver
• Specular Gold
• Aluma-Lux (Semi-Specular)
• Black
• White
Standard Sizes:
• 2x4
• 2x2
• 1x4
• Special Fabrication Available
.625ì
16mm
.400”, 10,2mm
1.00”
25,4mm
1.50”
38,1mm
Parahex
P2: 1-1/2” x 1-1/2” x 1”
.625ì
16mm
•
•
•
•
•
.400”, 10,2mm
.625ì 10,2mm
.400”,
16mm
.625ì
16mm
.48”
12,2mm
.48”
12,2mm
.75”
.48”19mm
12,2mm
.75”
.75”
19mm
19mm
P3: 3/4” x 3/4” x 1/2”
.400”, 10,2mm
.48”
12,2mm
.75”
.48” 19mm
12,2mm
.625ì
16mm
The Forgiving Finish
.75”
19mm
1.50”
38,1mm
P4: 3” X 3” X 1-1/2”
3”
76,2mm
.35”
9mm
Look Of Aluminum At The Price Of Plastic
Doesn’t Show Fingerprints
No Cave Effect
Will Not Bend Or Dent
Available On Any Slp Plastic Louver Or Eggcrate.
• A Premium Finish For Outstanding Lighting Installations.
• Allows Contaminants Such As Fingerprints Or Dust To Be Wiped Away.
• Available On Any Slp Plastic Louver Or Eggcrate.
P5: 3/4” x 3/4” x 3/8”
.75”
19mm
1400 S. Old Hwy 141 Fenton, MO 63026 USA
Phone: 800.248.0224 or 636.600.4084
Fax: 636.600.4108
[email protected]
www.slplighting.com
Replacement Wraparound Lenses
Lenses
A wide selection of replacement wraparound lenses are available.
A lens is a flat sheet of plastic, usually
clear or white. The distribution of the light
is skewed depending on the
pattern of the lens. Random and
uncontrolled distribution creates a bright
area of light. With certain
patterns, the lamp image is reduced.
Outdoor Replacement Lenses
Prismatic Pattern 12: The industry standard 3/16” female prismatic lens.
• Thickness: .100”, .110” or .125”
• Acrylic and Styrene (Polycarbonate Special Order)
• Standard sizes up to 50”x100”
Citadel 1™ Lenses:
Lenses
4 Foot 8 Foot
2.5” Injection Molded Lens
+
2” Vacuum Formed Lens
+
3” Vacuum Formed Lens
Injection Molded Lens:
50”x100”
In Stock
Vacuum Formed Lenses:
+
2.5”
2”
3”
+
Globes & Acorns:
• Polycarbonate
• Acrylic
• Smoked, Clear, White
or Linear Prism
Injection Molded Drop Lens:
• 12” x 12”
• 20” x 20”
Prismatic Pattern 15: The bold 3/8” female prism of Pattern 15 offers
reduced glare and an upgraded appearance.
• Thickness: .200”
• Standard sizes up to 4’x4’
Prismatic Pattern 19: The 3/16” male prism of Pattern 19 offers the lowest
glare of the prismatic lenses.
• Thickness: .156”
• Standard sizes up to 4’x4’
T5HO Tube Guards
T5 HO Tube Guard features an increased size and venting endcaps. The increased size
allows a greater distance of the guard from the hottest point of the lamp near the end
of the lamp. This distance reduces the temperature of the guard material measured at the inside wall of the guard. The T5 HO Tube Guard is suitable for
use with T5 HO lamps in normal operating conditions where the surface
of the lamp does not exceed 200°F.
Translucent Acrylic:
•
•
•
•
Acrylic
Frosted White or Matte Clear
Thickness: .040” or .080”
Standard sizes up to 2’x4’
Cracked Ice:
Tube Guards
•
•
•
•
• Polycarbonate Standard
• To fit T12, T8 or T5 Lamps in 4’ or 8’ Lengths
• Not recommended for T5HO lamps
Styrene
Frosted White or Clear
Thickness: .065”, .070” or .125”
Standard sizes up to 50’x100’
• Special Order Only on color tube guards
1400 S. Old Hwy 141 Fenton, MO 63026 USA
Phone: 800.248.0224 or 636.600.4084
Fax: 636.600.4108
[email protected]
www.slplighting.com
Replace the Lens NOT the Fixture!
Eggcrate Louvers
RFK3™ Retrofit any
existing lay-in fixture
into a deep cell
parabolic louver.
Eggcrate is a square configuration of cells with flat cell
walls. The function of eggcrate is to block any view of the
space above while creating a bright area of light.
RFK2™ Retrofit any
existing lay-in fixture
(including 3” deep
aluminum) with a
standard white steel
door frame. 1/2” Frame
will accept any lens,
louver or eggcrate.
T Series: 1/2” x 1/2” x 1/2”
.50”
12,7mm
.50”
12,7mm
Styrene - White
Acrylic - White
1x4, 2x2, 2x4
Old Lens
New Parabolic Louver
1. Unlatch and remove existing door frame
2. Disassemble door frame and remove lens/louver
3. Measure existing lens/louver
4. Factory to cut new lens/louver to fit
5. Install new lens/louver into existing
fixture door frame
Also Available In: 3x4 & 30x60
TC Economy Grade: 1/2” x 1/2” x 3/8”
Styrene - White, Black or Specular Silver
Acrylic - White
.300”
7,6mm
.625”
15,9mm
TC500 Specification Grade: 1/2” x 1/2” x 3/8”
Styrene - White or Black
Acrylic - White
True 1/2” Cell Size
.312”
7,9mm
.50”
12,7mm
Before:
Aluminum Eggcrate
.50”
12,7mm
After:
To Order:
1. Provide critical dimensions, or trace the profile
of the diffuser on a piece of paper.
2. Measure the exact length of the diffuser.
3. Fax or Email Information
.50”
12,7mm
AT: 1/2” cube aluminum
AT1: 1” cube aluminum
1”
25,4mm
Finishes: baked white enamel, mill finish, clear anodized or black enamel. Custom sizes available.
1400 S. Old Hwy 141 Fenton, MO 63026 USA
Phone:
1”
25,4mm
800.248.0224 or 636.600.4084
Fax: 636.600.4108
[email protected]
www.slplighting.com
Applications for
Louvers, Lenses and Eggcrate
•
•
•
•
•
•
•
•
POP Displays
Awnings
Elevators
Hospitals
Hotels
Schools
Office Lighting
HVAC
Plastic Industry
Offering the most comprehensive selection for
new and retrofit lighting installations
• LOUVERS
• EGGCRATE
• PRISMATIC LENSES
• WRAPAROUND LENSES
• GLOBES
1400 S. Old Hwy 141 Fenton, MO 63026 USA
V10272014
Fax: 636.600.4108
Phone: 800.248.0224 or 636.600.4084
[email protected]
www.slplighting.com
1400 S. Old Hwy 141 Fenton, MO 63026 USA
www.slplighting.com