PDF - digitalb.net

DIGITAL
DREAM IT. DESIGN IT. PUBLISH IT.
Black Label Setup
Replacing Apple TV with DigitalB
What You’ll Need
 
Two individuals
DigitalB replacement unit
Phillips bit screw driver
Removing the Samsung TV from the Black Label Studio Wall
Step
1
Have one person on each side of the TV, lift upwards about 2” and pull
away from the wall. This will release the TV from the wall mount bracket
Lift upwards approximately 2” and pull away from the
wall. This will release the TV from the wall mount bracket
www.digitalb.net
P: (248) 270 - 5191
|
[email protected]
Step
2
Unplug cables from Samsung TV. Safely place TV on credenza or where
it will not tip or fall
TV power cable
HDMI cable
HDMI cable
3
Unplug cables from the Apple TV and slide out of wall mount bracket.
Unscrew wall mount bracket from wall using your Phillips screwdriver
TV power cable
Step
Slide Apple TV out of wall mount bracket.
(Direction of slide may vary depending on
how the bracket was mounted)
www.digitalb.net
P: (248) 270 - 5191
|
[email protected]
Installing your DigitalB Media Player
Step
Locate the wall mount from the DigitalB package and secure to the wall.
1
Attach to wall with (4) screws.
(Use anchors if needed)
Wall Bracket
Step
2
Screw WIFI antenna into back of DigitalB Media Player. Plug in wireless
keyboard’s USB dongle into any front USB port.
Pull USB dongle from back
of input device and insert
into device USB port
Screw WIFI antenna
in device
Note: For best reception/connectivity, connect
USB dongle into front USB port on device.
www.digitalb.net
P: (248) 270 - 5191
|
[email protected]
Step
Connect cables to the DigitalB Media Player.
3
Existing Apple TV power cable
(This cable should be protruding from
the millwork wall through a grommet)
DigitalB power brick
HDMI cable
Step
4
Mount DigitalB Media Player to wall mount secured to the wall. Be
sure to mount the DigitalB Media Player with power button accessible
from either side of the Samsung TV. If DigitalB Media Player won’t be
accessible with TV mounted back on wall, press power button before
remounting TV.
Mount device to mounted wall bracket securely.
www.digitalb.net
Press power button to turn
on DigitalB Media Player.
P: (248) 270 - 5191
|
[email protected]
Step
Plug Samsung power cable and HDMI cable into Samsung TV ports.
5
TV power cable
HDMI cable
Step
6
With two individuals, mount Samsung TV back on to wall mount
brackets securely.
www.digitalb.net
P: (248) 270 - 5191
|
[email protected]
Step
7
If you have not pressed the power on the DigitalB Media Player and
the Samsung TV. Do so now. Once the DigitalB Media Player has been
launched, your Black Label content will automatically play.
If you have no content playing, or have any questions about setup,
please contact technical support.
Monday - Saturday 8:30 AM (EST) - 8:30 PM (EST)
(248) 270 - 5191 or email us at [email protected]
www.digitalb.net
P: (248) 270 - 5191
|
[email protected]