LactoSens® Test Kit and Reader

®
LactoSens
Now
Available
Lactose Biosensor Test Kit
#L0125
Fast, simple and precise detection of lactose in low lactose and
lactose-free milk products
®
DirectSens
has developed a biosensor for
the detection of residual lactose in
lactose-free milk products. An enzyme
immobilized on a disposable test strip is
able to detect lactose directly and
®
accurately using LactoSens
Reader
(#LR01).
Advantages
 Easy sample preparation – 1:5 dilution
 Simple handling
 Instant results – less than 1 minute
measuring time
 Very low quantitation limit - 0.02%
 High accuracy – 90-110% recovery
 Excellent precision - Less than 5%
standard deviation
®
LactoSens
Test Kit and Reader
 25 Disposable Test Strips
Customer Benefits
 Optimized production of lactose-free milk
 Cost savings through time savings
 Quality control
 Dilution buffer included
 Minimum shelf life 6 months
 Factory calibrated
 User friendly software
[email protected]
+43 699 1835 5188
www.directsens.com
DirectSens GmbH
Am Rosenbühel 38
3400 Klosterneuburg
Austria
Short Instruction
®
LactoSens
Important: Please read test kit manual before running the test
Dilute sample 1:5 with sample dilution buffer (e.g.
100 µL sample + 400 µL buffer) and mix well.
Switch on
Start
®
LactoSens
®
LactoSens
Reader.
Software on your computer.
Enter sample name and select sensor batch.
.
Take sensor out of the foil bag.
Don´t touch the black dot or circle.
Insert
.
®
LactoSens
into adapter.
Press start and immediately apply 100 µL diluted
sample starting in the middle of the black dot,
moving to the right, following the black hemicircle
and finishing at the silver part. After this, the whole
sensitive area should be covered with the milk
sample.
.
After 50 sec the result is displayed.
[email protected]
+43 699 1835 5188
www.directsens.com
DirectSens GmbH
Am Rosenbühel 38
3400 Klosterneuburg
Austria