MANUFACTURERS REPRESENTATIVES

Transcription

SERVING THE HVAC INDUSTRY SINCE 1939
MANUFACTURERS REPRESENTATIVES
 Access Doors & Panels
 Electric Duct Heaters
 Air Control Dampers
 Fire & Smoke Dampers
 Air Doors
 Gravity Ventilators
 Air Distribution
 Kitchen Exhaust Systems
 Architectural Louvers & Penthouses
 Motors, Controls
 Architectural Screens & Grilles
& Damper Accessories
 Backdraft Dampers
 Sound Attenuators & Enclosures
 Fans & Blowers
 VAV Terminal Units
 Roof/Smoke Hatches
 Security Grilles & Bars
REPRESENTING
Louvers and Dampers, Sound Attenuators
& Enclosures
Air Distribution Products
Commercial and Industrial Ventilation
Actuators & Valves
Fabric Air Dispersion
Roof Hatches & Access Doors
A Division of PCI Industries, Inc.
Linear Slot & Security Products
Damper Accessories
Access Doors
Pneumatic & Electronic Actuators
Air Curtains
Kitchen Ventilation &
Security Products
Pneumatic Actuators
Electric Duct Heaters & VAV’s
VAV Plaque Diffusers
Smoke Detectors
Leak Freeze
UL Rated & Non-Rated Door Louvers
Roof Curbs, Equip. Rails,
Expansion Curbs
Access Doors
SOUTHERN CALIFORNIA SALES
6490 Fleet Street • Commerce, CA 90040
Phone: 323-728-0004 • Fax: 323-889-4825
Send Bid Request to [email protected]
www.airprodsales.com
Table of Contents
Quick Ship Program
Order Desk: (323) 728-0004
2
Air Distribution (cont.)
3
4
4
5
5
6
7
8
Thermally Powered VAV Diffuser
Round Neck Stamped Louver Diffuser Lay-In
Round Face Fixed Discharge Cone Diffuser
Fixed Bar Return Grille
Bar Style Filter Grille
Double Deflection Registers
Steel Auxiliary Frame
Single Deflection Registers
Aluminum Egg-Crate Grilles
Louvers
27
28
28
29
29
30
30
31
31
32
Round Opposed Blade Damper
Square Opposed Blade Damper
Round Neck Opposed Blade Damper
Round Neck Adaptor Square To Round
Round to Round Pancake Adaptors
33
33
33
34
34
Dampers
Fire/Smoke Dampers
Vertical Curtain Dampers
Square to Round Adaptors
Ceiling Radiation Dampers
Mounting Angles
Air Control Dampers
Backdraft Dampers
Damper Accessories
Actuators & Accessories
U.L. Actuators
Pneumatic Actuator
Smoke Detectors
Access Doors & Roof Hatches
9-10
9 & 11
12
Exterior Access Panel
Stock Drywall Access Doors
Roof Hatch
13
14-17
18
Single Duct Terminal Units
VAV Accessories
18-19
20
Linear Slot Diffusers
Insulated Diffuser Plenum
Perforated Lay-In Diffusers
Perforated Lay-In Screens
Perforated Surface Mount
Modular Core Diffusers
Architectural Ceiling Diffuser Lay-In
Louvered Face Ceiling Diffuser
Curved Blade Ceiling Diffuser
21
21
22-24
24
25
26
26
27
27
Terminal Units
Air Distribution
Dampers
Order Form
Directory of Personnel
35
Back Cover
Quick Ship Program - pg. 2
QUICK SHIP PROGRAM
LA Order Desk: (323) 728-0004
Program Details, Schedules and Deliveries
(QSP - Rush - Standard Orders)
Pottorff Air Product Sales offers three categories of order schedules that are specifically designed to meet the dynamic requirements
of your customers. While orders may be placed by U.S. mail, courier mail, fax or e-mail, Pottorff Air Product Sales requests that you
refrain from placing orders, especially Standard Orders, over the telephone. Please note that the inherent risk of misunderstanding
verbal orders is assumed by the Buyer. Pottorff Air Product Sales takes great pride in meeting it’s scheduled ship dates. However, in
the rare case that Pottorff Air Product Sales misses a RUSH or QSP ship date, Pottorff Air Product Sales will not invoice the extra
RUSH or QSP charge.
24-Hour QSP - Call us for availability and pricing.
Rush Orders must be identified as “24-Hour QSP” - add 35% - or $35.00 whichever is greater.
3-Day QSP - 20% extra cost - or $20 whichever is greater.
3-Day QSP Orders are small to medium sized orders of specific products that can be shipped in three days from receipt of order
because of their simplicity. Specific model and size information is provided in the “Quick-Ship Program.”
Orders received Before Noon PST are scheduled to ship in three working days; orders received After Noon PST are scheduled to
ship in four working days. As an example, if a 3-day QSP Order is received before noon on Thursday (the 12th), then the order would
be scheduled to ship on Monday (the 16th). 3-Day QSP Orders must be identified as “3-Day QSP - add 20%.”
5-Day RUSH - 15% extra cost - or - $15 whichever is greater.
The 5-Day RUSH Program is designed for time critical orders and includes the majority of our product offering. Products available on a
RUSH basis are listed in our “Quick-Ship Program”. There are limited finishing capabilities on RUSH orders and non-stock actuators
are typically not available.
Orders received Before Noon PST are scheduled to ship in five working days; orders received AFTER NOON PST are scheduled to
ship in six working days. As an example, if a 5-Day RUSH Order is received before noon on Thursday (the 12th), then the order would
be scheduled to ship the following Wednesday (the 18th.) Rush orders must be identified as “5-day RUSH - add 15%.”
7-Day RUSH - 10% extra cost - or $10 whichever is greater.
The 7-Day RUSH Program is designed for time critical orders and includes the majority of our product offering. Products available on a
RUSH basis are listed in our “Quick-Ship Program”. There are limited finishing capabilities on RUSH orders and non-stock actuators
are typically not available.
Orders received Before Noon PST are scheduled to ship in seven working days; orders received AFTER NOON PST are scheduled to
ship in eight working days. As an example, if a 7-Day RUSH Order is received before noon on Thursday (the 12th), then the order
would be scheduled to ship the following Friday (the 19th.) Rush orders must be identified as “7-day RUSH - add 10%.”
Standard Orders
Standard Orders are scheduled for the earliest available production completion date. The schedule is our best estimate, not a
guarantee, of when orders will ship and our ability to maintain schedules is typically quite good. Production lead times are
approximately two to three weeks from receipt of order. Add two to three weeks to standard lead times for products requiring painted
or anodized finish. Consult factory for lead-time on non-stock actuators.
Sales Order Number (SON)
Upon receipt, each customer purchase order is assigned a sales order number (SON) and a scheduled shipment date. The SON
allows us to track all orders and provide rapid information regarding production status, shipping information and billing details.
2
FIRE/SMOKE DAMPERS - 5 YEAR WARRANTY
One Product - Multiple Applications
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Vertical walls.
UL 555 & 555S class II leakage rated.
16" inch long, 20 gauge galvanized sleeve.
1-1/2" hour (vertical & horizontal).
UL file #R11767.
C.S.F.M file #3225-0368:110 fire rated, 3230-0368:111 leakage rated.
Optional SSPF single sided retaining angle or loose flange (for use with air distribution).
All units available with optional round collars shipped loose.
All dampers supplied with Belimo 120 VAC (24 VAC available) actuators.
FSD-172 - Wall
Application
1 hour rating for tunnel type corridor ceiling construction.
UL 555 & 555S class II leakage rated.
16" inch long, 20 gauge galvanized sleeve.
UL file #R11767.
C.S.F.M. file #3225-0368:110 fire rating, 3230-0368:111 leakage rating.
Optional SSPF single sided retaining angle or loose flange
(for use with air distribution).
• All units available with optional round collars shipped loose.
• All dampers supplied with Belimo 120 VAC (24 VAC available actuators).
• See optional available accessories.
FSD-172 - Corridor
Ceiling Application
Accessory Reference
Size
Operator/Actuator
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
20"x20"
22"x22"
24"x24"
Air
Flow
Smoke Detector - pg. 12
Horizontal Mount
Actuators - pg. 9-10
Access Doors - pg. 13-17
The Model FSD-172 is cross listed for installation in
one and two hour rated walls for vertical mounting. It
is also listed for installations in one hour rated tunnel
corridor ceilings.
Single Mounting Angle
Over Drywall
Metal
Stud
SSPF Angles - pg. 5
3
UNDER Drywall
* Metal Stud Only
Damper
Sleeve
Metal
Stud
Mounting Angles
Order Desk: (323) 728-0004
Damper
Sleeve
Stock#
W-11694
W-11695
W-11696
W-11697
W-11698
W-11699
W-11700
W-11701
W-11702
W-11703
List Price
$531.00
$531.00
$567.00
$567.00
$639.00
$639.00
$678.00
$678.00
$721.00
$721.00
SSPF Mounting Angles
Pottorff Air Product Sales’s
exclusive single-side mounting
angle design only requires
angles on one side of partition.
The ingenious corner design
allows this mounting system to
install either underneath or on
top of the drywall offering additional installation options and
cost savings. Tested and
approved in accordance with
U.L. standard 555 this unique
system is in full compliance
with all building codes for wood
stud, metal stud or masonry
installations.
VERTICAL FIRE DAMPERS - 5 YEAR WARRANTY
• “A” style dynamic dampers stocked.
• Wall style vertical mount for
1 or 2 hour walls.
• 12", 20 gauge galvanized integral steel sleeve.
• U.L. file #R11767.
• C.S.F.M. file #3225-0368:101.
• Optional SSPF picture frame angles.
• Optional round collar(s) shipped loose.
• Optional loose flange for use with air distribution.
VFD-10D-A
Size
6"
8"
10"
12"
14"
16"
18"
20"
22"
24"
x
x
x
x
x
x
x
x
x
x
6"
8"
10"
12"
14"
16"
18"
20"
22"
24"
Stock#
W-11617
W-11618
W-11619
W-11620
W-11621
W-11622
W-11623
W-11624
W-11625
W-11626
List Price
$65.00
$65.00
$70.00
$70.00
$85.00
$85.00
$103.00
$103.00
$125.00
$125.00
Metal
Stud
Over Drywall
Vertical Mount
(Model - VFD-10D-ISAR shown above.
Optional round duct connection is a U.L.
approved breakaway connection.)
Metal
Stud
Damper
Sleeve
Mounting Angles
FIRE/SMOKE DAMPERS AND FIRE DAMPERS
SQUARE-TO-ROUND ADAPTORS
• The Fire/Smoke Dampers and Fire
Dampers Square-to-Round Caps
will not fit on the Ceiling Radiation
Dampers.
Size
6"x6"x6"
8"x8"x6"
8"x8"x8"
10"x10"x8"
10"x10"x10"
12"x12"x10"
12"x12"x12"
14"x14"x12"
14"x14"x14"
16"x16"x14"
16"x16"x16"
18"x18"x16"
18"x18"x18"
20"x20"x18"
20"x20"x20"
22"x22"x20"
22"x22"x22"
24"x24"x22"
24"x24"x24"
Damper
Sleeve
UNDER Drywall
* Metal Stud Only
Stock#
W-11637
W-11638
W-11639
W-11640
W-11641
W-11642
W-11643
W-11644
W-11645
W-11646
W-11647
W-11648
W-11649
W-11650
W-11651
W-11652
W-11653
W-11654
W-11655
List Price
$10.00
$12.00
$12.00
$14.00
$14.00
$16.00
$16.00
$17.00
$17.00
$17.00
$17.00
$18.00
$18.00
$20.00
$20.00
$22.00
$22.00
$30.00
$30.00
Accessory Reference
SSPF Angle - pg. 5
Access Doors - pg. 13-17
Warnock Hersey
Angle Set - pg.5
4
CEILING RADIATION DAMPERS - 5 YEAR WARRANTY
Ceiling radiation dampers are for use in floorceiling and roof-ceiling assemblies. They are
constructed of 22 gauge galvanized steel and
are stocked with an extended sleeve.
CFD-15-ES
•
•
•
•
•
•
•
•
Optional round duct
transition on top
Size
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
20"x20"
22"x22"
24"x24"
CRB-24
UL Listing: R14603
CSFM Listing: 3226-0368:104
U.L. file no. 3225-368:104.
CRB-24 24" x 24" radiation blankets for use
with T-bar ceiling diffusers.
Stocked NET ID only
Warnock Hersey listing: WH1-495PSH0177,-0178
Meets NFPA Standards: 90A & 101
Meets building code standards: IBC,
NBC, NFPA, SBC & UBC
Stock#
W-11742
W-11743
W-11744
W-11745
W-11746
W-11747
W-11748
W-11749
W-11750
W-11751
W-11731
$49.00
$56.00
$70.00
$80.00
$94.00
$101.00
$104.00
$125.00
$132.00
$142.00
$28.00
WARNOCK HERSEY MOUNTING ANGLES, FOR CFD’S ONLY
Cat#
W-12446
Size
2 pcs-1"x1/2"x28" Long x 20 ga.
2 pcs-1"x1/2"x3" Long x 20 ga.
LOOSE FLANGE STOCK - For FSD’s, VFD’s AND CFDs
Cat#
Size
W-12678
W-12679
W-12680
W-12681
W-12682
W-12683
W-12684
W-12685
W-12686
W-12687
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
20"x20"
22"x22"
24"x24"
Cat#
Size
SSPF MOUNTING ANGLES - For VFD’s and FSD’s Only.
W-11786
W-11787
W-11788
W-11789
W-11790
W-11791
W-11792
W-11793
W-11794
W-11795
5
List Price
Order Desk: (323) 728-0004
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
20"x20"
22"x22"
24"x24"
List Price
$12.00
List Price
$10.00
$10.00
$11.00
$11.00
$13.00
$13.00
$17.00
$17.00
$21.00
$21.00
List Price
$6.00
$8.00
$10.00
$12.00
$13.00
$15.00
$17.00
$19.00
$21.00
$23.00
CONTROL DAMPERS - 5 YEAR WARRANTY
•
•
•
•
•
•
•
•
Single and opposed blade action available.
6" x 16 gauge galvanized steel blades.
1/2" dia. hex plated steel blade shafts.
In-jamb linkage.
Standard nylon bushings.
1/2" round x 6" drive axle with bearing.
Dampers supplied 1/4" undersized.
Optional electric and pneumatic actuators
in stock (see accessory reference.)
• Optional manual locking quadrant
(see accessory reference.)
CD-42
•
•
•
•
•
CD-10R
6" x 22 gauge sleeve and blade.
Double beaded for strength.
Easy duct connection.
22 gauge galvanized blade with center “V”.
3/8" square zinc plated shafts with tight
sealing nylon bushings.
• Manual locking quadrant standard with
1-1/2" stand-off bracket.
• No rattles.
CD-25R
•
•
•
•
•
•
•
•
•
•
•
•
•
12" x 20” gauge galvanized steel sleeve.
Double beaded for strength and easy duct connection.
Double membrane steel blade (14 ga. equivalent).
Polyethylene blade gasket provides full diameter seal.
1/2" round diameter steel blade shafts.
Leakage less than 1% at 2" of static pressure.
Maintains seal at 4" of static pressure.
Optional electric and pneumatic actuators in stock.
Optional manual locking quadrant
(see accessory reference.)
Remote controlled cable operated balancing damper.
6" x 22 gauge galvanized steel blade and sleeve.
Double beaded for strength.
3/8" square zinc plated steel blade shafts with tight
sealing nylon bushings.
• Factory assembled (no field assembly required.)
• Includes 36" cable and remote operator
(as shown) (longer lengths available.)
Size
6"
8"
10"
12"
14"
16"
18"
20"
22"
24"
x
x
x
x
x
x
x
x
x
x
6"
8"
10"
12"
14"
16"
18"
20"
22"
24"
Size
Size
Stock#
List Price
Stock#
List Price
W-11889
W-11890
W-11891
W-11892
W-11893
W-11894
W-11895
W-11896
W-11897
W-11898
6"
8"
10"
12"
14"
16"
18"
20"
22"
24”
Size
Stock#
Field Mt. Kit
Extra Cable
Ex. Insulation
RCS-10R
List Price
W-11917
W-11918
W-11919
W-11920
W-11921
W-11922
W-11923
W-11924
W-11925
W-11926
W-11879
W-12392
W-11880
W-12393
W-11881
W-11882
W-11883
W-11884
W-11885
W-11886
W-11887
W-11888
6"
7"
8"
9"
10"
12"
14"
16"
18"
20"
22"
24"
6"
7"
8"
9"
10"
12"
14"
16"
18"
20"
22"
24"
Stock#
W-12380
W-12381
W-12382
W-12383
W-12384
W-12385
W-12386
W-12387
W-12388
W-12389
W-12390
W-12391
W-12395
W-12377
W-12378
$80.00
$80.00
$94.00
$94.00
$121.00
$121.00
$152.00
$152.00
$189.00
$189.00
$59.00
$63.00
$63.00
$68.00
$68.00
$74.00
$86.00
$92.00
$107.00
$119.00
$133.00
$148.00
$137.00
$142.00
$152.00
$162.00
$174.00
$185.00
$197.00
$214.00
$240.00
$259.00
List Price
$160.00
$160.00
$164.00
$164.00
$170.00
$176.00
$187.00
$193.00
$215.00
$220.00
$234.00
$249.00
$125.00
$3.00/FT
*
* Included with W-12377
Accessory Reference
Damper Accessories - pg. 8
Actuators - pg. 9-10
6
RCS-10R FIELD MOUNTING KIT
RCS-10R Field
Mounting Kit
• Control arm/screw assembly - mounted on
standoff bracket.
• Standard 36" long cable included (optional cable
lengths available.)
• Allen key remote control assembly can be provided
loose for use with almost any balancing damper.
• Standard 15/16" O.D. provides unobtrusive opening in
ceiling or wall for architectural requirements.
BACKDRAFT DAMPERS
2" (51)
Std.
Size
Horizontal Mount
5-5/8"
(143)
Max.
BD-50
5 YEAR WARRANTY
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
20"x20"
22"x22"
24"x24"
Vertical Mount
The BD-50 is constructed with 2" X 1/2" X .060
extruded aluminum channel frame and 24 gauge
formed aluminum blades. They feature nylon
bushings and blade axles. They are constructed
for vertical mounting and horizontal upflow.
Air Flow
BDR
7
• Neoprene closed cell gaskets around frame.
• Designed for low air flow gravity and fan usage
less than 600 FPM.
Order Desk: (323) 728-0004
List Price
$42.00
$42.00
$56.00
$56.00
$77.00
$77.00
$119.00
$119.00
$146.00
$146.00
• Aluminum tie bar interconnects all blades for
increased stability at higher velocities up to
1250 fpm.
• Blade edge open cell neoprene gaskets
reduce leakage and noise.
• Units supplied approximately 1/4" under
nominal duct dimension.
The BDR is constructed with 20 gauge steel frame and
sleeve with aluminum spring loaded blades. They are
constructed for vertical mounting and horizontal upflow.
6-3/8"
Stock#
W-11899
W-11900
W-11901
W-11902
W-11903
W-11904
W-11905
W-11906
W-11907
W-11908
Size
4"
6"
7"
8"
10"
12"
14"
16"
Stock#
W-11909
W-11911
W-11912
W-11913
W-11914
W-11915
W-11916
W-12281
List Price
$40.00
$46.00
$71.00
$83.00
$114.00
$154.00
$182.00
$229.00
DAMPER ACCESSORIES
U.L. DAMPER ACCESSORIES
E for
FD
A
B
Size
FUSIBLE
A Style, 165 Degree
A Style, 212 Degree
B Style, 165 Degree
B Style, 212 Degree
E Style, 165 Degree
E Style, 212 Degree
Starlink, 165 Degree
Fusible Link Hook
Stock#
W-12099
W-12100
W-12103
W-12104
W-12420
W-12421
W-12422
W-12445
FD & FSD LABELS
List Price
$7.00
$7.00
$7.00
$7.00
$12.00
$12.00
$36.00
$8.00
Size
RCP-1 Toggle
RCP-1K Key
RCP-M Momentary
RDT-Remote Damper Tester
RLP-1 One Light Indicator
RLP-2 Two Light Indicator
HS-10 Replacement Assy
Stock#
HIGH BLADE
BRACKET
DAMPER DRIVE
Size
S.S. Steel Oilite Bearing,
1/2" Round
Synthetic Bearing,
1/2" Round
Synthetic Bearing,
3/8" Square
Size
1/2" RD. Damper Drive Arms
High Blade Brackets
Low Blade Brackets
Ball Joint Swivels
1/2" Damper Drive w/ U-clip, 6"
5/16" Brass Trunion
5/16" Steel Rod, Zinc,per foot
1/2" Steel Rod, Zinc, per foot
3/4" Steel Rod, Hollow, Zinc,
per foot
Damper Blade Jumper Strap
Stock#
List Price
W-12439
$7.00
W-12438
W-12441
Stock#
W-12423
List Price
$1.25
W-12424
$132.00
W-12426
$132.00
W-12425
$1.25
TESTER
Stock#
W-12428
W-12429
W-12430
W-12432
W-12447
W-12431
W-12427
W-12434
W-12437
LOW BLADE
BRACKET
List Price
W-12433
$10.00
$20.00
$15.00
$10.00
$20.00
$8.00
$10.00
$15.00
$20.00
5/16" Connecting Rod
BALL JOINT
SWIVEL
$20.00
Size
$11.00
Blade Edge Seal,
Bulb, per foot
Blade Edge Seal,
Closed Cell, per foot
$7.00
Stock#
List Price
W-12443
$11.00
W-12442
$11.00
BLADE EDGE SEAL
BUSHING/BEARINGS
Size
MANUAL QUADRANTS
Fire Damper,
Single Label
Fire Damper,
500 Piece Roll
Fire/Smoke,
Single Label
Fire/Smoke,
500 Piece Roll
$138.00
$173.00
$173.00
$375.00
$26.00
$32.00
$58.00
W-10087
W-10088
W-12694
W-10089
W-12688
W-12689
W-12690
SWITCHES
Size
List Price
LQ-355, 3/8" Square
LQ-560, 1/2" Round
LQ-555, 1/2" Square
Stock#
W-10092
W-10095
W-10096
List Price
$10.00
$22.00
$22.00
8
ACTUATORS
U.L. FIRE/SMOKE DAMPER ELECTRIC ACTUATORS - 350° DEGREE RATING
BELIMO
5 YEAR WARRANTY
The type FSNF and FSLF spring-return actuators are intended for the operation of smoke and combination fire and smoke dampers in ventilation and air-conditioning systems. The actuator will meet
requirements of UL555 and UL555S when tested as an assembly with the damper and will meet
requirements of UBC for 15 second opening and closing at 3500F.
Square footage of damper operated will depend on the model required.
FSNF-120
Catalog# Model#
W-11986 FSLF-120
W-12025 FSLF-120-S
W-11991 FSNF-120
W-11993 FSNF-120-S
FSNF-24
W-11992
W-11987 FSNF-24-S
FSLF-24
W-12031
W-12026 FSLF-24-S
W-12674 FSAF-120
W-12675 FSAF-120-S
FSAF-24
W-12676
W-12677 FSAF-24-S
Max.Sq.Ft. Voltage
6
6
16.5
16.5
16.5
16.5
6
6
24
24
24
24
120 VAC
120 VAC
120 VAC
120 VAC
24 VAC
24 VAC
24 VAC
24 VAC
120 VAC
120 VAC
24 VAC
24 VAC
Power
11(R), 7(H)
11(R), 7(H)
18(R), 6(H)
18(R), 6(H)
18(R), 6(H)
18(R), 6(H)
3(R), 2(H)
3(R), 2(H)
9.5/3.5
9.5/3.5
9.5/3.5
9.5/3.5
Aux. Switch
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
Description
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Return
Return
Return
Return
Return
Return
Return
Return
Return
Return
Return
Return
List$
$397.00
$465.00
$499.00
$591.00
$455.00
$546.00
$361.00
$429.00
$607.00
$706.00
$557.00
$658.00
U.L. FIRE/SMOKE DAMPER PNEUMATIC ACTUATORS - 350° DEGREE RATING
The 331-4826 Pneumatic Damper Actuator is a compact, modular,
totally enclosed, rolling diaphragm-type actuator designed for
modulating or two position actuation. Typical applications are for
control and fire/smoke leakage rated dampers or air valves.
SIEMENS
331-4826
The 331-2998 Pneumatic Actuator Damper Actuator is a totally
enclosed, pneumatic piston type actuator designed to operate
dampers for ventilating systems, mixing box control, and other
applications requiring a large effective diaphragm area and
long stroke.
Catalog# Model# Max.Sq.Ft. Pressure Power
9
SIEMENS
W-10547 331-4826
4
8 - 13 PSI Pneumatic
W-10548 331-2998
12
8 -13 PSI Pneumatic
Aux. Switch
No
No
Order Desk: (323) 728-0004
Description
331-2998
List$
The No. 3 Pneumatic Damper $125.00
Actuator is a Compact,
Modular, Totally Enclosed,
Rolling Diaphragm-Type
Actuator Designed for
Modulating or Two Position
Actuation.
The No. 3 Pneumatic Damper $196.00
Actuator is a Compact,
Modular, Totally Enclosed,
Rolling Diaphragm-Type
Actuator Designed for
Modulating or Two Position
Actuation.
ACTUATORS
ELECTRIC ACTUATORS - 2 POSITION SPRING RETURN - FOR USE WITH AIR CONTROL DAMPERS
5 YEAR WARRANTY
BELIMO
LF
NF/AF
Catalog#
Model#
Max.Sq.Ft.
AF-120-US
80/40 (w/seals)
W-10554
W-12002 AF-120-S-US 80/40 (w/seals)
AF-24-US
80/40 (w/seals)
W-10555
AF-24-S-US
80/40 (w/seals)
W-12005
LF-120-US
20/10 (w/seals)
W-10550
W-12000 LF-120-S-US 20/10 (w/seals)
LF-24-US
20/10 (w/seals)
W-10551
LF-24-S-US
20/10 (w/seals)
W-12003
W-10552 NFUBP-120-US 40/20 (w/seals)
NFUB-120-S 40/20 (w/seals)
W-12001
NFB-24
40/20 (w/seals)
W-10553
NFB-24-S
40/20 (w/seals)
W-12004
TF-120-US
10/5 (w/seals)
W-12449
10/5 (w/seals)
W-12451 TF-120-S-US
TF-24-US
10/5 (w/seals)
W-12450
TF-24-S-US
10/5 (w/seals)
W-12452
Voltage
120
120
24
24
120
120
24
24
120
120
24
24
120
120
24
24
Power
6(R), 2.3(H)
6(R), 2.3(H)
5(R), 1.5(H)
5(R), 1.5(H)
5.5 (R), 3.5(H)
5.5(R), 3.5(H)
5(R), 2.5(H)
5(R), 2.5(H)
6(R), 3.5(H)
6(R) 3.5(H)
5(R), 2.6(H)
5(R), 2.6(H)
2(R), 1.3(H)
2(R), 1.3(H)
2(R), 1.3(H)
2(R), 1.3(H)
Aux. Switch
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
Description
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
2-Position,
ELECTRIC ACTUATORS - PROPORTIONAL SPRING RETURN
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Spring
Return
Return
Return
Return
Return
Return
Return
Return
Return
Return
Return
Return
Return
Return
Return
Return
List$
$518.00
$609.00
$463.00
$553.00
$353.00
$410.00
$319.00
$376.00
$429.00
$520.00
$379.00
$470.00
$309.00
$364.00
$264.00
$320.00
5 YEAR WARRANTY
For position control, fail-safe control of dampers in HVAC systems. Control is positional from an auxiliary contact, or a manual switch.
These actuators provide true spring return operation for reliable application and positive close off on airtight dampers. The spring
return system provides constant torque to the damper with, and without, power applied to the actuator.
Catalog#
Model#
Max.Sq.Ft.
Voltage
Power
W-12454
AFX-24-MFT-US
80/40 (w/seals) 24 vac (2-10vdc) 6(R), 1.8(H)
W-12453
NFB-24-SR-US
40/20 (w/seals) 24vac (2-10vdc)
Aux. Switch
No
W-10557 AFX-24-MFT-S-US 80/40 (w/seals) 24vac (2-10vdc) 6(R), 1.8(H)
NF/AF
W-10556
NFB-24-SR-S-US 40/20 (w/seals) 24vac (2-10vdc)
Yes
No
3(R),1(H)
Yes
3(R),1(H)
ELECTRIC ACTUATORS-PROPORTIONAL NON SPRING RETURN
LM
AM
Model#
Max.Sq.Ft.
Voltage
Power
W-10560 AMX24-MFT 40/30 (w/seals) 24vac(2-10vdc) 4(R), 1.25(H)
W-12459 AMB24-SR
AMB24-3
W-12460
W-10561 GMB24-SR
GMB24-3
W-12461
W-10558 LMB24-SR
LMB24-3
W-12462
W-12463 LMX24-MFT
W-12464
W-12465
40/30 (w/seals)
40/30 (w/seals)
70/50 (w/seals)
70/50 (w/seals)
15/6 (w/seals)
15/6 (w/seals)
15/6 (w/seals)
24vac(2-10vdc)
24vac
24vac(2-10vdc)
24vac
24vac(2-10vdc)
24vac
24vac(2-10vdc)
4(R), 1.25(H)
4(R), 1.25(H)
4.5(R), 2(H)
4.5(R), 2(H)
1.5(R), 0.5(H)
1.5(R), 0.5(H)
1.5(R), 0.5(H)
2.5(R), 0.5(H)
24vac
NMB24-3 50/25 (w/seals)
NMB24-SR 50/25 (w/seals) 24vac(2-10vdc) 2.5(R), 0.5(H)
Proportional Spring
Return
Proportional Spring
Return
Proportional Spring
Return
Proportional Spring
Return
List$
$636.00
$727.00
$505.00
$596.00
5 YEAR WARRANTY
2-10 VDC OR 4-20 mA CONTROL SIGNAL
Catalog#
Description
Aux. Switch
No
Add-On
Add-On
Add-On
Add-On
Add-On
Add-On
No
Add-On
Add-On
Description
Proportional,
Programming Available
Proportional
Modulating, Floating Point
Proportional
Proportional
Proportional,
Programming Available
Proportional
List$
$499.00
$465.00
$320.00
$604.00
$453.00
$282.00
$176.00
$354.00
$228.00
$320.00
PNEUMATIC ACTUATORS
PROPORTIONAL OR 2 POSITION
KREUTER
MCP-3631
The 331-4826 Pneumatic Damper Actuator is a compact, modular,
totally enclosed, rolling diaphragm-type actuator designed for modulating or two position actuation. Typical applications are for control
and fire/smoke leakage rated dampers or air valves.
•
•
•
•
Fixed or pivot mounting models.
Position relay available as an option.
Variety of mounting/linkage kits to fit any application.
Threaded shaft for easy mounting of accessory items.
Catalog#
W-51160
W-10547
W-10548
11
SIEMENS
Model#
MCP-3631-3000
331-4826
331-2998
Spring Range
5-10 PSI
8-13 PSI
8-13 PSI
Description
Pneumatic, Proportional or 2 Position
Order Desk: (323) 728-0004
331-4826
List$
$121.00
$121.00
$121.00
SYSTEM SENSORS
SYSTEM SENSOR D4120 LOW FLOW SMOKE DETECTOR
•
•
•
•
D4120
•
•
•
•
•
•
Outside mounting tabs.
Patented telescoping sampling tube.
Built-in reset button.
Interconnectability for multi-fan
shutdown (up to fifty air handlers).
Patented cover tamper trouble signal.
Easy to clean.
24 VAC/DC or 120/VAC operation.
High-Low voltage barrier.
UL 268A listed.
1 year warranty
Catalog# Model#
W-12660
W-12661
W-12662
W-12663
W-12664
SAMPLING TUBE FOR ABOVE DETECTOR
D4120
DST 1.5
DST 3
DST 5
DST-10
Description
Smoke Detector
1.5 Foot Sampling Tube
3 Foot Sampling Tube
List$
$214.00
$12.00
$16.00
$20.00
$43.00
SYSTEM SENSOR 2151 LOW VELOCITY PHOTOELECTRIC (NO FLOW/LOW FLOW) DUCT DETECTOR
2151
•
•
•
•
•
•
Low profile smoke detector design.
Low standby current.
Two LED’s “blink” in stand by.
Detector head plugs easily into base.
Built-in test switch.
Built-in tamper-resistant feature.
Catalog#
W-10564
SMOKE DETECTOR BASE UNIT
B114LP
• 120 VAC base unit for
use with 2151 above.
List$
$72.00
B114LPOS
B114LPBT
• 24 VAC/DC base unit for use with 2151 above.
Model#
B114LP
B114LPBT
Accessory Reference
Required to be used with
2151 detector for in-duct
installations. Also works
with D4120.
Catalog#
W-10565
W-12652
List$
$83.00
$75.00
• Air velocity rating 0 to 3000 FPM.
• 120VAC base with built-in shorting spring.
• Designed for mounting on standard
electrical box.
• SEM screws for easy wiring and positive
wire retention.
• Removable cover and insect screen for
field cleaning.
• UL 268A listed.
SYSTEM SENSOR CARBON MONOXIDE
DETECTOR
•
•
•
•
•
UL 2075
12/24 VDC
Wall or ceiling mounted.
Code required trouble relay.
Electro Chemical sensing.
CO1224
Catalog#
W-12478
List$
$153.00
RTS451 Remote
Test Station
Catalog#
W-12476
List$
$61.00
12
EXTERIOR ACCESS PANEL: MODEL XPA
XPA
16 Gauge Galvanized
Steel Frame
SPECIFICATIONS: MODEL XPA
•
•
•
•
•
•
•
Catalog#
W-12479
W-12480
W-12481
W-12482
W-12483
W-12484
W-12485
W-12486
Size
12"x12"
14"x14"
18"x18"
24"x24"
24"x36"
24"x48"
30"x30"
36"x48"
Wall Opening
12-3/8"x12-3/8"
14-3/8"x14-3/8"
18-3/8"x18-3/8"
24-3/8"x24-3/8"
24-3/8"x36-3/8"
24-3/8"x48-3/8"
30-3/8"x30-3/8"
36-3/8"x48-3/8"
*For key lock on above doors add $25.00 list.
13
Stainless Steel is
also available Call for Pricing
Door: 2" Thick Insulated .040 Aluminum Door.
Flange: 1" - 16 Ga. Galvanized Steel.
Exterior Hinge: Stainless Steel.
Gasketing: EPDM Foam Rubber Bulb Seal.
Handles: Locking and Non-Locking, Zinc Die Cast with Chrome Plating.
Handles are factory installed. Panels Are Ready For Installation.
Finish: Powder Coat Gray Primer.
Order Desk: (323) 728-0004
No. Handles
1
1
1
2
2
2
2
2
List $
$232.00
$249.00
$320.00
$480.00
$498.00
$587.00
$498.00
$943.00
STOCK DRYWALL ACCESS DOORS
TM - GENERAL PURPOSE INTERIOR ACCESS DOOR
Opening (W)
1-3/4" (44.5)
1"
(25.4)
Door (W)
1"
(25.4)
TM
Catalog#
W-11493
W-11495
W-11496
W-11500
W-11501
W-11503
W-11506
W-11507
Size
8"
10"
12"
14"
16"
18"
24"
24"
X
X
X
X
X
X
X
X
8"
10"
12"
14"
16"
18"
24"
36"
List$
$42.00
$50.00
$54.00
$59.00
$66.00
$72.00
$107.00
$143.00
* Add $20.00 list to above doors for key option.
•
•
•
•
•
•
•
•
•
For Masonry, tile, and wallboard.
16 gauge door and frame.
Screwdriver operated cam locks.
Steel construction.
Phosphate dipped with gray prime coat.
Concealed hinge on long dimension.
Cut opening 3/8" larger than nominal.
Custom sizes and colors also available - Just Ask Us!!!
Can be ordered with Keylock option.*
FD - FIRE RATED ACCESS DOOR
Ceiling Opening (W)
Wall Opening (W)
Door (W)
FD
Catalog#
W-11455
W-11456
W-11457
W-11458
W-11459
W-11460
W-11461
W-11462
W-11463
W-11464
W-11465
W-11466
W-11467
W-11468
W-11469
Size
8"
10"
12"
14"
16"
18"
20"
22"
24"
24"
24"
30"
32"
36”
36"
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
8"
10"
12"
14"
16"
18"
30"
30"
24"
36"
48"
30"
32"
36”
48"
List$
$143.00
$153.00
$160.00
$171.00
$182.00
$203.00
$310.00
$317.00
$267.00
$402.00
$488.00
$370.00
$420.00
$484.00
$608.00
Typical Ceiling Installation
•
•
•
•
•
•
•
•
•
•
W
Typical Wall Installation
1 or 3 Hour UL “B” Label wall rating.
Warnock Hersey 1 or 3 hour floor/ceiling rating.
2" thick, 20 gauge door, 16 gauge frame.
Self closing, spring-assisted.
Stocked with flush key hole. Recessed Universal latch for
turning and key lock included.
Concealed hinge on long dimension.
Phosphate dipped with gray prime coat.
Cut opening 3/8" larger for walls.
Frame opening 1-5/8" larger for ceilings and line opening
with 5/8" “X” gypsum board.
Custom sizes and colors also available - Just Ask Us!!!
DUCT ACCESS DOORS
DRUGA - HIGH PRESSURE - ROUND DUCT ACCESS DOOR - UNINSULATED
Hand knob with
brass insert
Outer door
The DRUGA high pressure round access
door is constructed of a stamped galvanized
steel panel and features a neoprene gasket.
Conical Spring
Bolt fastened
and sealed to
inner door
Galvanized Steel
Inner door with
flat side cover
Closed cell
neoprene
Ductwall
Ductwall
Catalog#
W-11546
W-11547
W-11548
W-11549
W-11551
W-11552
W-11553
W-11554
W-11555
W-11556
W-11557
W-11558
DRUGA
• Tested to 20" pos. wg & 10" neg.
wg pressure.
• Plastic knobs with brass inserts.
• Cut out template for door provided.
• Uninsulated.
Model
DRU846GA
DRU849GA
DRU8411GA
DRU12811GA
DRU12814GA
DRU12816GA
DRU161216GA
DRU161218GA
DRU161220GA
DRU161222GA
DRU161224GA
DRU161228GA
Duct Size
5" - 6"
7" - 9"
10" - 11"
10" - 11"
12" -14"
15"- 16"
15" - 16"
17" - 18"
19" - 20"
21" - 22"
23" - 24"
25" - 28"
List$
$49.00
$49.00
$49.00
$69.00
$69.00
$69.00
$94.00
$94.00
$94.00
$94.00
$94.00
$94.00
DUGA - HIGH PRESSURE - SANDWICH DOOR FOR RECTANGULAR DUCT - UNINSULATED
The DUGA high pressure sandwich
door is constructed of a stamped
galvanized steel panel and features
a neoprene gasket.
Tested to 20" pos. wg & 10" neg. wg pressure.
Plastic knobs with brass inserts.
Cut out template for door provided.
Uninsulated.
Galvanized Steel
Outer door
Ductwall
Conical Spring
Closed cell
neoprene
DUGA
•
•
•
•
Hand knob with
brass insert
Catalog#
Inner door with
flat side cover
Model
W-11542
W-11543
W-11544
W-51726
DU106GA
DU128GA
DU1814GA
DU2418GA
Catalog#
Model
Bolt fastened
and sealed to
inner door
Duct Size
10"X6"
12"X8"
18"X14"
24"X18"
Ductwall
List$
$36.00
$52.00
$110.00
$188.00
DC - CIRCULAR CLEAN-OUT DOORS
The DC circular clean-out door is airtight
and has no frame to install and seal.
DCGA
• Circular opening effective for duct cleaning.
• Effortless opening and closing.
15
W-11559
W-11560
W-12371
Order Desk: (323) 728-0004
DC8GA
DC10GA
DC12GA
Duct Size
8" Diameter
10" Diameter
12" Diameter
List$
$36.00
$41.00
$48.00
DUCT ACCESS DOORS
DF2GA - HIGH TEMPERATURE GREASE DOORS FOR GREASE DUCT, 2300°F
• Cut out template provided.
• Ceramic fiber gasket (2300°F,
meets NFPA 96 standards).
• 16 ga. black iron backing plate
for grease applications.
Fiberglass Rope or
Ceramic Fiber
Gasket
The DF2GA is constructed of stamped sealed panels and features steel
wing nuts. An excellent clean-out door.
Galvanized Steel
Ductwall
W-11561
W-11562
W-11563
W-12339
HAD - HINGED INSULATED DUCT ACCESS DOORS
• High density closed cell gasketingdoor to frame & frame to duct.
• Zinc plated continuous steel hinge.
• Thumb-operated steel cam latch(es).
• Hole size is 1" smaller than nominal.
Inner door with
smooth inside cover
16 Gauge
Black Iron
Backing Plate
HAD
The HAD Hinged Insulated Access Door features galvanized steel construction and 1”
high density fiberglass insulation.
Model
Duct Size
10" X 6"
12" X 8"
18" X 14"
24" X 18"
The CAD Duct Access Door features galvanized steel construction and 1" high density
fiberglass insulation.
Ductwall
List$
$125.00
$180.00
$257.00
$481.00
Hinge
Insulation
Gasket
W-11523
W-11524
W-11525
W-11526
W-11527
W-11528
W-11529
W-11530
W-11531
CAD - CAMMED DUCT ACCESS DOOR, INSULATED
• High density closed cell gasketing door to frame & frame to duct.
• Hole size is 1" smaller than nominal.
Bolt welded
and sealed to
inner door
D106F2GA
D128F2GA
D1814F2GA
D2418F2GA
Catalog#
CAD
Outer door
Conical Spring
Catalog#
DF2GA
Zinc Coated
Wing Nuts
Size
6" X 6"
8" X 8"
10" X 10"
12" X 12"
14" X 14"
16" X 16”
18" X 18"
20" X 20"
24" X 24"
List$
$23.00
$26.00
$31.00
$33.00
$41.00
$47.00
$53.00
$58.00
$73.00
Hinge
Gasket
Catalog#
W-12396
W-12397
W-12398
W-12399
W-12400
W-12401
W-12402
W-12403
W-12404
Size
6"
8"
10"
12"
14"
16"
18"
20"
24"
X
X
X
X
X
X
X
X
X
6"
8"
10"
12"
14"
16"
18"
20"
24"
Insulation
List$
$23.00
$26.00
$31.00
$33.00
$41.00
$47.00
$53.00
$58.00
$73.00
16
DUCT ACCESS DOORS
HAD-P - HINGED INSULATED DUCT ACCESS DOORS - PRESS-ON FLANGED FRAME
• Double sided adhesive neoprene gasket for easy installation.
• Zinc plated continuous steel hinge.
• Punched hole start for easy screw flange
installation.
Catalog#
W-11532
W-11533
W-11534
W-11535
W-11536
W-11537
W-11538
W-11539
W-11540
HAD-P
The HAD-P Hinged Insulated Duct Access Door features galvanized steel construction
and high density closed cell gasketing from the door to the frame only. Features 1"
high density fiberglass insulation.
Size
6"X6"
8"X8"
10"X10"
12"X12"
14"X14"
16"X16"
18"X18"
20"X20"
24"X24"
List$
$29.00
$32.00
$37.00
$41.00
$54.00
$62.00
$72.00
$81.00
$98.00
RAD - ROUND DUCT NON-INSULATED DUCT ACCESS DOOR
•
•
•
•
1/4" thick neoprene gasket door to duct.
Zinc plated continuous steel hinge.
Two draw-tight sash locks.
Loose striker plates for field installation.
RAD
Catalog#
W-11515
W-11516
W-11517
W-11518
W-11519
W-11520
W-11521
The RAD Round Duct Non-Insulated Duct Access Door is a 20 gauge galvanized steel
roll-formed door panel which features zinc plated hardware.
WAD - WALK-IN INSULATED ACCESS DOOR
• 1" fiberglass insulation.
• Full length zinc plated continuous vertical
hinge.
• Two Ventlock 202 door latches with interior
and exterior handles.
• Hole size is nominal.
WAD
17
Gasket
5" - 6"
7" - 8"
9" - 10"
11"- 12"
14" - 16"
18" - 20"
22" - 24"
List$
$40.00
$40.00
$48.00
$48.00
$48.00
$75.00
$75.00
Latch
Insulation
1"
1-1/4"
"Z" Flange
The WAD Walk-In Insulated Access Door features a 16
gauge galvanized steel frame and 22 gauge galvanized
steel double-wall door.
Order Desk: (323) 728-0004
Size
Hinge
Catalog#
W-11486
W-11487
W-11489
W-11490
W-11491
W-12509
W-11492
Handle
Size
18"
18"
24"
24"
24"
24"
24"
X
X
X
X
X
X
X
36"
48"
36"
48"
60"
66"
72"
List$
$221.00
$237.00
$245.00
$263.00
$300.00
$313.00
$345.00
STOCK ROOF HATCHES
RHG-1 GALVANIZED ROOF HATCHES
RHG-1
• 14 gauge galvanized steel curb, 12" high
with 4" wide flange including holes for
securing to roof deck.
• Curb includes integral, rounded corner, and
counter flashing.
• EPDM draft seal gasket.
• Heavy gauge automatic hold open arm with
red grip for opening and closing.
• Exterior latch handle with integral padlock
hasp, inside locking handle with interior
padlock hasp.
1" (25mm) FIBERGLASS
INSULATION
Model SDV Pneumatic Controls
• Pressure independent.
• Pneumatic actuator.
• Control enclosure optional.
• Damper position indicator on shaft.
• Multifunction controller.
• DA-NO/NC or RA-NO/NC.
• Field calibration required.
Model SDV No Controls
• Unit stocked less controls.
• Control enclosure optional.
• Flo-Cross Multipoint Flo-Sensor.
• 3/8" bare damper shaft.
12"
(305mm)
RED VINYL GRIP
ROOFING BY
OTHERS
WIDTH
*Aluminum Roof Hatch
Available by Request.
SINGLE DUCT TERMINAL UNITS*
SDV
22 ga. (.8mm)
GALVANIZED STEEL LINER
14 ga. (1.9mm)
GALVANIZED
STEEL CURB
FRAME
Other sizes and colors
available. Call for information.
STEEL ROOF HATCHES*
Catalog#
W-10091
Size
30" X 36"
List$
$1,195.00
SDV Dimensional Data
* We can strap two boxes together to make a dual box.
•
•
•
•
•
TPE CONTINUOUS
HATCH SEAL
1" (25mm)
FIBERBOARD
INSULATION
The RHG-1 Roof Hatch features a 14 gauge galvanized steel cover with a 22 gauge
galvanized steel liner with a Hammertone powder coat gray finish and standard heavy
duty hinge. 1” fiberboard insulation surrounds the base and there is 1” fiberglass
insulation between the exterior door cover and liner. This roof hatch is compression
operated with a shock absorbing cylinder for safe closure.
•
•
•
•
•
COMPRESSION
CYLINDER
14 ga. (1.9mm)
GALVANIZED STEEL COVER
ARI Certified sound performance.
Heavy gauge steel construction.
Low leakage damper design.
Thermally insulated inlet tube.
Acoustically and thermally insulated casing
meets UL181 and NFPA 90A requirements.
Slip and drive discharge connection.
Damper position indicator mark.
Electronic controls available.
Patented Flo-Cross Multipoint Flo-Sensor.
Also stocked with Insul-Guard (13/16” Rigid
Duct Board) lining
Pricing on next page
Unit
Size
6
8
10
12
14
16
24
CFM Range
Min to Max
0/100-520
0/185-925
0/290-1450
0/420-2100
0/580-2600
0/740-3700
0/1420-7100
Length
(L)
15-1/2"
15-1/2"
15-1/2"
15-1/2"
15-1/2"
15-1/2"
15"
Height
(H)
Width
(W)
8"
12"
10"
12"
12-1/2"
14"
15"
16"
17-1/2"
20"
18"
24"
see above see above
Inlet Dimension
(D)
5-7/8"
7-7/8"
9-7/8"
11-7/8"
13-7/8"
15-7/8"
see above
SINGLE DUCT TERMINAL UNITS
SINGLE DUCT TERMINAL
UNITS, NO CONTROLS
Catalog#
Size
Catalog#
List$
$229.00
$244.00
$273.00
$296.00
$329.00
$370.00
$723.00
6"
8"
10"
12"
14"
16"
24"X16"
W-12341
W-12342
W-12343
W-12344
W-12345
W-12346
W-12510
SINGLE DUCT TERMINAL
UNITS, PNEUMATIC CONTROLS
Size
List$
$433.00
$447.00
$477.00
$499.00
$533.00
$573.00
$927.00
6"
8"
10"
12"
14"
16"
24"X16"
W-12347
W-12348
W-12349
W-12350
W-12351
W-12352
W-12511
W-12528
W-12529
W-12530
W-12531
W-12532
W-12533
W-12534
Catalog#
W-12359
W-12360
W-12361
W-12362
W-12363
W-12364
W-12512
D
B Centered
on height
A
C
W
1 3/4
Offset direction may be eit her direction from the plant
Measurements
in inches
Size
6
8
10
12
14
16
24
19
H
8”
10
12-1/2
15
17-1/2
18
18
W
Offset direction may be either direction from the plant
L
A
1 Row
B
12
5
0
6-1/4
12
5
0
8-3/4
14
5 1-1/4 10-7/8
16
5 1-1/4 13-3/8
20 7-1/2 1-1/4 15-7/8
24 7-1/2 1-1/4 15-7/8
38
5 1-1/4 15-7/8
C
3
3
4-1/4
4-1/4
4-1/4
4-1/4
4-1/4
D
L
A
2 Row
B
1/2 5
0
6-7/8
1/2 5 1-1/8
9
7/8 5 1-1/8 11-1/2
7/8 5 1-1/8 14
7/8 7-1/2 1-1/8 16-1/2
7/8 7-1/2 1-1/8 16-1/2
7/8 5 1-1/8 16-1/2
Size
6"
8"
10"
12"
14"
16"
24"X16"
List$
$263.00
$281.00
$314.00
$340.00
$378.00
$425.00
$831.00
C
4-1/4
4-1/4
4-1/4
4-1/4
4-1/4
4-1/4
4-1/4
Size
6"
8"
10"
12"
14"
16"
24" x 16"
List$
$467.00
$485.00
$518.00
$544.00
$582.00
$629.00
$1035.00
HOT WATER REHEAT COIL, 1-ROW
1
H
W-12521
W-12522
W-12523
W-12524
W-12525
W-12526
W-12527
Catalog#
Copper tubing-aluminum fins.
Housed in galvanized casing.
Coil mounts at discharge outlet.
Slip and drive duct connection.
Coil ships loose.
Optional mounting available.
L
Catalog#
SINGLE DUCT TERMINAL UNITS,
W/ENVIROSEAL LINING,
PNEUMATIC CONTROLS
OPTIONAL HOT WATER COILS 1 ROW AND 2 ROW
•
•
•
•
•
•
SINGLE DUCT TERMINAL UNITS,
W/ENVIROSEAL LINING, NO CONTROLS
D
7/8
7/8
7/8
7/8
7/8
7/8
7/8
Order Desk: (323) 728-0004
Size
6"
8"
10"
12"
14"
16"
24" x 16"
List$
$74.00
$85.00
$126.00
$163.00
$201.00
$227.00
$427.00
HOT WATER REHEAT COIL, 2-ROW
Catalog#
W-12365
W-12366
W-12367
W-12368
W-12369
W-12370
W-12512
Size
6"
8"
10"
12"
14"
16"
24" x 16"
List$
$117.00
$151.00
$203.00
$253.00
$366.00
$411.00
$581.00
SINGLE DUCT TERMINAL UNIT ACCESSORIES
CONTROL ENCLOSURE
Catalog#
W-12695
Size
18" x 12-3/8" x 6-1/2"
List$
$46.00
3-FOOT ATTENUATOR FOR
VAV BOXES
OPTIONAL STOCK 3 FOOT ATTENUATORS
Catalog#
W-12514
W-12515
W-12516
W-12517
W-12518
W-12519
W-12520
• 1" insulation, open both ends.
• S and D drive connections.
Size
6"
8"
10"
12"
14"
16"
24" x 16"
List$
$138.00
$149.00
$174.00
$194.00
$236.00
$262.00
$352.00
SINGLE DUCT AND DUAL DUCT VAV ACCESSORIES
CONTROLS AND ACCESSORIES
Catalog#
W-51160
W-10562
W-12578
Pneumatic Actuators
MCP-3631-3000, 5-10 psi Pneumatic
rotary actuator
rotary actuator
rotary actuator
Transformer and Disconnect
Catalog#
W-12584
W-12585
W-12584
Size
Transformer, 120-24 VAC
Disconnect, 120-277 VAC
List$
$121.00
$121.00
$121.00
List$
$71.00
$14.00
TESTER
W-12585
20
LINEAR SLOT DIFFUSERS
LINEAR SLOT DIFFUSERS FROM STOCK OR LOCALLY CUSTOM MADE
2-1/2"
2-1/2"
5/8"
1-1/8"
LTSC
•
•
•
•
•
3/8"
3/4"
Concealed mounting in hard surfaces
Concealed mounting with hemmed plenum
Air Managers Linear Slot Diffusers
Fully adjustable horizontal pattern controller in stock
1 slot and 2 slot, 3/4" or 1" slot widths stocked.
Excellent for VAV applications
Can be field cut to custom lengths
MCS Frame
LTSC Frame
LINEAR SLOT DIFFUSERS - MCS FRAME
LINEAR SLOT DIFFUSERS - LTSC FRAME
Catalog#
Linear Slot Diffusers feature
aluminum construction with end
caps or butt caps. They are
stocked in a bright white finish
with black pattern controller.
W-11176
W-11177
W-11178
W-11182
W-11183
W-11184
W-11173
W-11174
W-11175
W-11179
W-11180
W-11181
Catalog#
List$
Size
$145.00
$181.00
$218.00
$197.00
$246.00
$295.00
$166.00
$207.00
$249.00
$218.00
$272.00
$326.00
48" x 1 Slot x 3/4"
60" x 1 Slot x 3/4"
72" x 1 Slot x 3/4"
48" x 2 Slot x 3/4"
60" x 2 Slot x 3/4"
72" x 2 Slot x 3/4"
48" x 1 Slot x 1"
60" x 1 Slot x 1"
72" x 1 Slot x 1"
48" x 2 Slot x 1"
60" x 2 Slot x 1"
72" x 2 Slot x 1"
W-12408
W-12409
W-12410
W-12411
W-12412
W-12413
W-12414
W-12415
W-12416
W-12417
W-12418
W-12419
MATCHING INSULATED DIFFUSER PLENUMS
•
•
•
•
Air Managers insulated linear plenum boot.
Matching fit for stock linear slot diffusers.
Galvanized steel construction.
Stocked in 48", 60" and 72" lengths.
Catalog#
W-12586
W-12587
W-12588
W-12589
W-12590
W-12591
W-12592
W-12593
W-12594
W-12595
W-12596
W-12597
21
Size
48" x 1 Slot x 3/4"
60" x 1 Slot x 3/4"
72" x 1 Slot x 3/4"
48" x 2 Slot x 3/4"
60" x 2 Slot x 3/4"
72" x 2 Slot x 3/4"
48" x 1 Slot x 1"
60" x 1 Slot x 1"
72" x 1 Slot x 1"
48" x 2 Slot x 1"
60" x 2 Slot x 1"
72" x 2 Slot x 1"
List$
$129.00
$166.00
$253.00
$129.00
$166.00
$253.00
$129.00
$166.00
$253.00
$129.00
$166.00
$253.00
Diffuser Plenums are designed for
single diffusers or continuous runs
and can be used for supply or return
applications. Stocked without inlet
collar, must be field cut.
VARIES
1/2” MIN.
INLET
COLLAR
ROUND UP
TO 10”
FLAT OVAL
UP TO 14”
1/2 INCH INTERNAL
INSULATION
MEETS NFPA 90A AND 90B,
SMACNA AND ASTM C 1071,
TYPE 1
PLENUM MATERIAL: 24 GAUGE
GALVANIZED STEEL
INLET
DAMPER
(OPTIONAL)
_
13” on 3/4” 2”
14” on 2-1/2” & 3”
VARIES
DUCT WIDTH
45 DEGREE TURN
_
2-1/2” on 3/4” 2” SLOT
4” on 2-1/2” & 3” SLOT
CEILING
OPENING
WIDTH
Order Desk: (323) 728-0004
7/8"
Size
48" x 1 Slot x 3/4"
60" x 1 Slot x 3/4"
72" x 1 Slot x 3/4"
48" x 2 Slot x 3/4"
60" x 2 Slot x 3/4"
72" x 2 Slot x 3/4"
48" x 1 Slot x 1"
60" x 1 Slot x 1"
72" x 1 Slot x 1"
48" x 2 Slot x 1"
60" x 2 Slot x 1"
72" x 2 Slot x 1"
List$
$187.00
$232.00
$280.00
$249.00
$311.00
$373.00
$207.00
$259.00
$311.00
$269.00
$337.00
$404.00
PERFORATED LAY-IN DIFFUSERS
PERFORATED ADJUSTABLE CURVED BLADE LAY-IN T-BAR AND MATCHING RETURN
•
•
•
•
•
•
•
PV
MODEL PV-LT
MODULE SIZE LESS 1/4
23
Tuttle and Bailey curved blade perforated diffuser.
Round or square neck.
Unit is standard with adjustable curved blade core in neck.
Adjustable horizontal to vertical air pattern.
Diffuser stocked as 4 way blow pattern standard.
24" x 24" lay-in ceiling module with removable perforated face.
White baked enamel finish.
PR
MODEL PV-NR, Narrow Regress
W-10213
W-10214
W-10215
W-10216
W-10217
W-10218
W-10220
W-10221
W-10222
W-10223
W-10244
W-10225
Frame NR, Narrow
Regress
5/16
Size
6"
8"
10"
12"
14"
16"
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
W-10234
W-10235
W-10236
W-10237
W-10238
W-10239
W-12294
W-12295
W-12296
W-12297
W-12298
W-12299
W-12300
W-12302
Size
6"
8"
10"
12"
14"
16"
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
22"x22"
5/16
23-3/8
Max CFM @ NC
311@40
469@40
745@40
732@40
996@40
1094@40
314@40
473@40
639@40
840@40
1088@40
1396@40
List$
$69.00
$69.00
$69.00
$72.00
$72.00
$74.00
$69.00
$69.00
$69.00
$72.00
$72.00
$74.00
PR-LT, PERFORATED FACE RETURN, 24" x 24" LAY-IN PANEL
Catalog#
MODEL PVR-NR
Frame NR, Narrow
Regress
PV-LT, CURVED BLADE, PERFORATED FACE, 24" x 24"--LAY-IN PANEL
Catalog#
MODEL PR-LT
Max CFM @ NC
275@34
488@38
763@41
1099@43
1495@46
1953@49
350@35
622@39
972@42
1400@45
3150@49
4706@51
List$
$50.00
$50.00
$50.00
$50.00
$53.00
$55.00
$55.00
$55.00
$55.00
$57.00
$57.00
$60.00
$60.00
$55.00
23-3/8
PV-NR, CURVED BLADE, PERFORATED FACE,
24" x 24" LAY-IN PANEL, NARROW REGRESS
Catalog#
W-10317
W-10318
W-10319
W-10320
W-10321
W-10322
W-10323
W-10324
W-10325
W-10326
W-10327
W-10328
Size
6"
8"
10"
12"
14"
16"
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
Max CFM @ NC
311@40
469@40
745@40
732@40
996@40
1094@40
314@40
473@40
639@40
840@40
1088@40
1396@40
List$
$78.00
$78.00
$78.00
$80.00
$80.00
$83.00
$78.00
$78.00
$78.00
$80.00
$80.00
$83.00
PVR-NR, PERFORATED FACE RETURN, 24" x24" LAY-IN PANEL,
NARROW REGRESS
Catalog#
W-10336
W-10337
W-10338
W-10339
W-12355
W-10340
W-10342
W-10343
W-10344
W-10345
W-10346
W-10347
Size
6"
8"
10"
12"
14"
16"
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
List$
$66.00
$66.00
$66.00
$68.00
$68.00
$70.00
$66.00
$66.00
$66.00
$68.00
$68.00
$70.00
22
PERFORATED FACE MODULAR CORE LAY-IN T-BAR AND MATCHING RETURN
•
•
•
•
•
•
•
PM
PR
MODEL PM-NR, Narrow Regress
MODEL PM-LT
23 3/4
Listed - 1/4
LT
Tuttle and Bailey modular core perforated diffuser.
Square neck.
Removable modular core design.
Diffuser is adjustable to any blow pattern.
Diffuser stocked with cores set at 4 way blow standard.
NR
MODEL PR-LT
23 11/16
Listed - 1/8
MODEL PVR-NR
23 11/16
Listed - 1/8
NR
H
H
H
23 25/64
23 25/64
PM-LT, MODULAR CORE, PERFORATED FACE, 24" x 24" LAY-IN PANEL
Catalog#
W-10227
W-10228
W-10229
W-10230
W-10231
W-10232
W-10233
Size
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
Max CFM @ NC
175@22
311@27
486@31
700@35
-
List$
$67.00
$77.00
$84.00
$94.00
$102.00
$115.00
$124.00
Catalog#
W-10234
W-10235
W-10236
W-10237
W-10238
W-10239
W-12294
W-12295
W-12296
W-12297
W-12298
W-12299
W-12300
W-12302
23
Size
6"
8"
10"
12"
14"
16"
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
22"x22"
Max CFM @ NC
275@34
488@38
763@41
1099@43
1495@46
1953@49
350@35
622@39
972@42
1400@45
3150@49
4706@51
List$
PM-NR, MODULAR CORE, PERFORATED FACE,
24" x 24" LAY-IN PANEL, NARROW REGRESS
Catalog#
W-10329
W-10330
W-10331
W-10332
W-10333
W-10334
W-10335
Size
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
Max CFM @ NC
175@22
311@27
486@31
700@35
-
List$
$63.00
$71.00
$79.00
$88.00
$95.00
$106.00
$115.00
PVR-NR, PERFORATED FACE RETURN, 24" x 24" LAY-IN PANEL,
NARROW REGRESS
$50.00
$50.00
$50.00
$50.00
$53.00
$55.00
$55.00
$55.00
$55.00
$57.00
$57.00
$60.00
$60.00
$55.00
Order Desk: (323) 728-0004
Catalog#
W-10336
W-10337
W-10338
W-10339
W-12355
W-10340
W-10342
W-10343
W-10344
W-10345
W-10346
W-10347
Size
6"
8"
10"
12"
14"
16"
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
List$
$66.00
$66.00
$66.00
$68.00
$68.00
$70.00
$66.00
$66.00
$66.00
$68.00
$68.00
$70.00
PERFORATED FACE MOUNTED ADJUSTABLE AIR PATTERN LAY-IN T-BAR AND MATCHING RETURN
•
•
•
•
•
•
•
PP
Tuttle and Bailey economy perforated diffuser.
Round or square neck.
Unit is standard with face mounted adjustable air pattern.
Diffuser is field adjustable to any blow pattern.
Diffuser stocked with 4 way blow pattern preset.
MODEL PP-LT
PR
PP-LT, MOUNTED PATTERN DEFLECTORS, PERFORATED
FACE, 24" x 24" LAY-IN PANEL
Catalog#
W-12282
W-12283
W-12284
W-12285
W-12286
W-12287
W-10241
W-10242
W-10243
W-10244
W-10245
W-10246
W-10247
Size
6"
8"
10"
12"
14"
16"
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
Max CFM @ NC
Catalog#
W-10234
W-10235
W-10236
W-10237
W-10238
W-10239
W-12294
W-12295
W-12296
W-12297
W-12298
W-12299
W-12300
W-12302
List$
275@43
489@49
764@54
1100@57
1497@60
1955@63
350@45
622@51
972@56
1400@60
-
MODEL PR-LT
$51.00
$51.00
$51.00
$51.00
$54.00
$56.00
$56.00
$56.00
$56.00
$59.00
$59.00
$61.00
$71.00
Size
6"
8"
10"
12"
14"
16"
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
22"x22"
Max CFM @ NC
List$
275@34
488@38
763@41
1099@43
1495@46
1953@49
350@35
622@39
972@42
1400@45
3150@49
4706@51
$50.00
$50.00
$50.00
$50.00
$53.00
$55.00
$55.00
$55.00
$55.00
$57.00
$57.00
$60.00
$60.00
$55.00
PERFORATED LAY-IN SCREENS
PERFORATED FACE LAY-IN T-BAR SCREENS
NOMINAL
MODULE SIZE
9/16
PTL
24" x 24"
48" x 24"
PTL-LT, PERFORATED FACE, 24" x 24" LAY-IN PANEL, NON-DUCTED
Catalog#
W-10963
W-10964
W-10965
Size
24"x12"
24"x24"
48"x24"
Max CFM @ NC
2548@39
5250@42
-
List$
$26.00
$28.00
$45.00
24" x 12"
• Steel perforated, non-ducted.
• White baked enamel finish.
MODULE LESS
1/4
PTL-NR, PERFORATED FACE, 24" x 24" LAY-IN PANEL,
NON-DUCTED, NARROW REGRESS
Catalog#
W-11171
Size
24"x24"
List$
$37.00
24
PERFORATED SURFACE MOUNT
PERFORATED FACE SURFACE MOUNT SUPPLY AND RETURN
V-PERF-S
•
•
•
•
•
SUPPLY
Flat frame construction with screw holes.
Square neck with removable perforated face.
Basic curved blade perforated diffuser.
Diffuser stocked as 4 way blow pattern standard.
CEILING OPENING IS DUCT SIZE
V-PERF-R
RETURN
• Flat frame construction with screw holes.
• Square neck with removable perforated face.
CEILING OPENING IS DUCT SIZE
V-PERF-S, PERFORATED FACE,
CURVED BLADE SUPPLY,
SURFACE MOUNT
Catalog#
W-10886
W-10887
W-10888
W-10889
W-10890
W-10891
W-10892
W-10893
W-10894
W-10895
25
Size
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
20"x20"
22"x22"
24"x24"
List$
$96.00
$104.00
$108.00
$116.00
$135.00
$158.00
$185.00
$208.00
$229.00
$250.00
V-PERF-R, PERFORATED FACE,
RETURN, SURFACE MOUNT
Catalog#
W-10301
W-10302
W-10303
W-10304
W-10305
W-10306
W-10307
W-10308
W-10309
W-10310
Size
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
20"x20"
22"x22"
24"x24"
Order Desk: (323) 728-0004
List$
$33.00
$37.00
$45.00
$48.00
$56.00
$66.00
$77.00
$81.00
$89.00
$108.00
MODULAR CORE DIFFUSERS
MODULAR CORE T-BAR LAY-IN AND SURFACE MOUNT
• Square neck.
• Each individual core can be removed and rotated to provide
the required air pattern.
• T-bar lay-in and surface mount units stocked.
Note: SOBD’s will not fit these diffusers, you must use SMOBD’s.
SQD-LT
SQD-SB
SQD-SB, MODULAR CORE, BEVELED FRAME, SURFACE MOUNT
SQD-LT, MODULAR CORE, 24" x 24" LAY-IN PANEL
Catalog#
W-10131
W-10132
W-10133
W-10134
W-10135
W-10136
W-10137
Size
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
Max CFM @ NC
275@28
489@33
764@38
1100@41
1497@44
1956@47
2475@49
Catalog#
W-10122
W-10123
W-10124
W-10125
W-10126
W-10127
W-10128
W-10129
W-10130
W-12599
List$
$85.00
$87.00
$100.00
$109.00
$121.00
$132.00
$142.00
Size
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
20"x20"
22"x22"
24"x24"
Max CFM @ NC
275@28
489@33
764@38
1100@41
1497@44
1956@47
2475@49
3056@52
3697@53
4400@55
List$
$44.00
$48.00
$58.00
$73.00
$82.00
$92.00
$101.00
$142.00
$150.00
$156.00
ARCHITECTURAL CEILING PLAQUE DIFFUSER LAY-IN
PLAQUE DIFFUSER T-BAR LAY-IN
Tuttle and Bailey lay-in plaque diffusers feature a round
neck connection and a choice of six round neck sizes.
The all stamped process means no miter lines or
unsightly fasteners.
T-1100, ARCHITECTURAL PLAQUE DIFFUSER,
24" x 24" LAY-IN PANEL
Catalog#
W-12322
W-12323
W-12324
W-12325
W-12326
W-12327
Size
6"
8"
10"
12"
14"
15"
Max CFM @ NC
280@34
490@38
770@41
1100@43
1500@43
1720@46
List$
$82.00
$82.00
$82.00
$82.00
$82.00
$82.00
•
•
•
•
•
Diffuser model is 24" square.
May be used for supply or return.
1-1/4" collar for easy duct connection.
Removable plaque face.
T-1100
26
LOUVERED FACE CEILING DIFFUSERS - Lay-in and Surface Mount
LOUVERED FACE LAY-IN AND SURFACE MOUNT DIFFUSER
Frame LT, Lay-in T-Bar
Frame SB, Surface Beveled
Ceiling Module
Duct
size
plus 1
2-1/8
2-1/8
7/8
Duct plus 5
Ceiling Module minus 1/4
M-LT
•
•
•
•
•
Tuttle and Bailey louvered face diffuser.
Square neck sizes stocked in 3" increments.
4-way fixed air pattern stocked.
Surface mount ceiling opening is duct plus 1".
Inner assembly spring loaded and removable.
• Excellent for vav and cold air devices.
M-SB
• Removable core.
• Surface mount is beveled frame.
Note: SOBD’s will not fit these diffusers, you must use SMOBD’s.
M-LT, LOUVERED FACE DIFFUSER, 24" x 24" LAY-IN PANEL
Catalog#
W-10208
W-10209
W-10210
W-10211
W-12600
W-12394
Size
6"x6"
9"x9"
12"x12"
15"x15"
18"x18"
21"x21"
Max CFM @ NC
225@34
506@37
900@37
1406@40
2025@41
2756@42
List$
$86.00
$91.00
$118.00
$149.00
$179.00
$208.00
M-SB, LOUVERED FACE DIFFUSER, SURFACE MOUNT,
BEVELED FRAME
Catalog#
Size
6"x6"
9"x9"
12"x12"
15"x15"
18"x18"
21"x21"
W-10201
W-10202
W-10203
W-10204
W-10205
W-12601
Max CFM @ NC
225@34
506@37
900@37
1406@40
2025@41
2756@42
List$
$43.00
$48.00
$76.00
$107.00
$136.00
$186.00
CURVED BLADE CEILING DIFFUSERS - Surface and Exposed Mount
CURVED BLADE SURFACE MOUNT CEILING DIFFUSERS
•
•
•
•
TRU AIRE adjustable curved blade ceiling diffuser.
Also designed for low sidewall, high sidewall applications.
Curved Blade Surface Mount Ceiling Diffusers feature a 4 way fixed
discharge pattern
• Excellent for vav and cold air devices.
Catalog#
W-10176
W-10177
W-10179
W-10181
W-10182
W-12373
W-10184
Size
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
List$
$32.00
$38.00
$44.00
$53.00
$66.00
$82.00
$100.00
THERMALLY POWERED VAV PLAQUE DIFFUSER
VSD-4, RICKARD THERMALLY POWERED VAV PLAQUE DIFFUSER FOR LAY-IN
•
•
•
•
•
•
•
Thermally Actuated using Wax Bulb Technology.
10 Yr. Replacement Parts Warranty.
No Electrical Requirements.
No Tools Needed to Set Temperature Setpoints.
Reversing Changeover.
No Routine Maintenance Required.
Self Contained • ARI Certified.
Catalog#
27
1 1/8 for size 6
1 1/4 for size 8
1 3/8 for sizes 10 & 12
Heating Offset Adjustment
7 1/4 Minimum Airflow Adjustment
LT
VSD-4
Neck - 1/8 *
Cooling Setpoint Adjustment
23 3/4
W-12602
W-12603
W-12604
W-12605
Order Desk: (323) 728-0004
2 1/2
18
Size
6"
8"
10"
12"
Max CFM @ NC
196@25
349@28
545@34
785@44
1/4
List$
$515.00
$515.00
$515.00
$515.00
ROUND NECK STAMPED LOUVERED DIFFUSER LAY-IN
HIGH VOLUME SQUARE FACE LOUVERED DIFFUSER
•
•
•
•
•
•
Excellent performance for both vav and cold air devices.
Choice of six round neck sizes.
Diffuser module is 24" square.
1-1/4" collar for easy duct connection.
Earthquake tabs standard.
S1200-LT
S1200-LT, ROUND NECK 2-CONE LOUVERED FACE DIFFUSER, LAY-IN
Tuttle and Bailey high volume 2 cone louvered face
diffuser is constructed with a stamped process which
features no miter lines or unsightly fasteners. The
anti-streak, anti-smudge design keeps your ceiling clean.
Catalog#
W-10195
W-10196
W-10197
W-10198
W-10199
W-10200
Max CFM @ NC
Size
216@29
384@33
600@36
864@39
1069@38
1227@38
6"
8"
10"
12"
14"
15"
List$
$73.00
$73.00
$73.00
$73.00
$73.00
$73.00
ROUND FACE FIXED DISCHARGE CONE DIFFUSER
HIGH CAPACITY ROUND FACE DIFFUSER - Exposed or Surface Mount
•
•
•
•
•
•
•
Tuttle and Bailey round face high capacity diffuser.
Heavy gauge steel construction.
Core is easily removed for installation or maintenance.
Stocked in 2" increments.
Two horizontal discharge settings.
Center button is removable for access to damper (not included).
P3
P3, THREE CONE ROUND CEILING DIFFUSER
Catalog#
W-10187
W-10188
W-10189
W-10190
W-10191
W-10192
W-10193
W-12606
W-12650
Size
6"
8"
10"
12"
14"
16"
18"
20"
24"
Max CFM @ NC POS1.2
275@37/42
490@39/44
763@41/45
1100@43/46
1490@44/47
1960@45/48
2480@41/44
3060@47/49
4400@49/50
List$
$114.00
$123.00
$134.00
$152.00
$174.00
$212.00
$256.00
$277.00
$322.00
Nominal Round
Duct Size D
06
08
10
12
14
16
18
20
24
B
C
6-1/2
8-1/2
10-1/2
12-1/2
14-1/2
16-1/2
18-1/2
20-1/2
24-1/2
11-1/8
14-3/4
18-1/4
22
26
29
32-1/2
36
43-1/4
E
E
(Pos. 1) (Pos. 2)
1-3/4
2-1/8
2-7/8
3-1/8
3-3/8
4
4-3/4
5-7/8
7-3/4
1-1/8
1-1/2
2-1/8
2-3/8
2-5/8
3-1/4
3-7/8
4-7/8
6-5/8
28
STATIONARY RETURN GRILLE
STEEL BAR STYLE RETURN GRILLE - EXPOSED OR SIDEWALL SURFACE MOUNT
• Steel fixed horizontal
blades on 3/4" centers.
• Steel 1-1/4" flat border
frame with screw holes.
• Countersunk screw holes
and mounting screws.
• Blades are fixed at 35
degree deflection.
T70D
T70D-LT FIXED BAR STYLE
RETURN GRILLE, LAY-IN
Catalog#
W-10114
W-10115
W-10116
W-10117
W-10118
W-10119
W-10120
W-10121
Size
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
22"x22"
List$
$59.00
$61.00
$64.00
$71.00
$76.00
$82.00
$93.00
$95.00
T70D FIXED BAR STYLE RETURN GRILLE, SURFACE MOUNT
Catalog#
W-10437
W-10438
W-10439
W-10440
W-10441
W-10442
W-10443
W-10444
W-10445
W-10446
W-10447
W-10448
W-10449
W-10450
W-10451
W-10452
W-10453
W-10454
W-10455
W-10456
W-10457
W-10458
W-10459
W-10460
W-10461
W-10462
W-10463
W-10464
W-10465
W-10466
W-10467
W-10468
W-10469
W-10470
W-10471
W-10472
W-10473
W-10474
W-10475
W-10476
W-10477
Size
6"x6"
8"x4"
8"x6"
8"x8"
10"x4"
10"x6"
10"x8"
10"x10"
12"x4"
12"x6"
12"x8"
12"x10"
12"x12"
14"x4"
14"x6"
14"x8"
14"x10"
14"x12"
14"x14"
16"x4"
16"x6"
16"x8"
16"x10"
16"x12"
16"x14"
16x16
18"x4"
18"x6"
18"x8"
18"x10"
18"x12"
18"x14"
18"x16"
18"x18"
20"x4"
20"x6"
20"x8"
20"x10"
20"x12"
20"x14"
20"x16"
BAR STYLE FILTER GRILLE
STEEL BAR STYLE FILTER GRILLES FOR T-BAR
•
•
•
•
•
Steel filter frame for 1" filter.
Hinged parallel to blades.
Screw driver latches.
Filters not included.
Catalog#
S90H-FF-TB
29
W-10516
W-12636
Size
20"x20"
44"x20"
List$
$122.00
$263.00
Order Desk: (323) 728-0004
List$
$16.00
$16.00
$18.00
$19.00
$18.00
$19.00
$20.00
$22.00
$19.00
$20.00
$24.00
$26.00
$28.00
$20.00
$24.00
$26.00
$28.00
$30.00
$34.00
$22.00
$26.00
$28.00
$30.00
$34.00
$37.00
$40.00
$24.00
$27.00
$30.00
$34.00
$36.00
$41.00
$45.00
$51.00
$27.00
$28.00
$31.00
$35.00
$37.00
$44.00
$49.00
Catalog#
W-10478
W-10479
W-12623
W-10480
W-10481
W-10482
W-10483
W-10484
W-10485
W-10486
W-10487
W-10488
W-10489
W-10490
W-10491
W-10492
W-10493
W-10494
W010495
W-10496
W-10497
W-10498
W-10499
W-10500
W-10501
W-10502
W-10503
W-10504
W-10505
W-10506
W-10507
W-10508
W-10509
W-10510
W-12624
W-12625
W-12626
W-12627
W-12628
W-12629
W-12630
Size
20"x18"
20"x20"
22"x10"
22"x22"
24"x4"
24"x6"
24"x8"
24"x10"
24"x12"
24"x14"
24"x16"
24"x18"
24"x20"
24"x24"
30"x4"
30"x6"
30"x8"
30"x10"
30"x12"
30"x14"
30"x16"
30"x18"
30"x20"
30"x24"
30"x30"
36"x6"
36"x8"
36"x10"
36"x12"
36"x14"
36"x16"
36"x18"
36"x20"
36"x24"
36"x30"
36"x36"
46"x22"
48"x12"
48"x24"
48"x36"
48"x48"
List$
$55.00
$61.00
$36.00
$103.00
$28.00
$34.00
$36.00
$37.00
$43.00
$49.00
$57.00
$64.00
$72.00
$86.00
$37.00
$41.00
$45.00
$51.00
$55.00
$64.00
$73.00
$81.00
$89.00
$111.00
$143.00
$49.00
$56.00
$61.00
$69.00
$78.00
$88.00
$97.00
$106.00
$138.00
$185.00
$240.00
$151.00
$89.00
$184.00
$348.00
$442.00
DOUBLE DEFLECTION BAR TYPE SUPPLY REGISTERS
STEEL SUPPLY REGISTER - EXPOSED OR SIDEWALL
SURFACE MOUNT
• Steel adjustable vertical face bars and horizontal
back bars on 3/4" center.
• 1-14" flat border frame with screw holes.
• Countersunk screw holes and mounting
screws included.
• Polyurethane foam gasket
included on frame.
• Steel OBD damper included.
T64
T64, DOUBLE DEFLECTION BAR TYPE SUPPLY REGISTER W/OBD
Catalog#
W-10686
W-10687
W-10688
W-10689
W-10690
W-10691
W-10692
W-10693
W-10694
W-10695
W-10696
W-10697
W-10698
W-10699
W-10700
W-10701
W-10702
W-10703
W-10704
W-10705
W-10706
W-10707
W-10708
W-10709
W-10710
Size
6"x4"
6"x6"
8"x4"
8"x6"
8"x8"
10"x4"
10"x6"
10"x8"
10"x10"
12"x4"
12"x6"
12"x8"
12"x10"
12"x12"
14"x4"
14"x6"
14"x8"
14"x10"
14"x12"
14"x14"
16"x4"
16"x6"
16"x8"
16"x10"
16"x12"
List$
$39.00
$47.00
$41.00
$48.00
$52.00
$45.00
$51.00
$55.00
$65.00
$48.00
$55.00
$63.00
$69.00
$76.00
$52.00
$61.00
$64.00
$76.00
$82.00
$93.00
$57.00
$64.00
$71.00
$82.00
$89.00
Catalog#
W-10711
W-10712
W-10713
W-10714
W-10715
W10716
W-10717
W-10718
W-12607
W-10719
W-10720
W-10721
W-10722
W-10723
W-10724
W-10725
W-12608
W-12609
W-10726
W-10727
W-10728
W-10729
W-10730
W-10731
W-12610
Size
16"x14"
16"x16"
18"x4"
18"x6"
18"x8"
18"x10"
18"x12"
18"x14"
18"x16"
18"x18"
20"x4"
20"x6"
20"x8"
20"x10"
20"x12"
20"x14"
20"x16"
20"x20"
24"x4"
24"x6"
24"x8"
24"x10"
24"x12"
24"x14"
24"x16"
List$
$101.00
$114.00
$64.00
$68.00
$74.00
$89.00
$94.00
$109.00
$125.00
$141.00
$67.00
$73.00
$78.00
$94.00
$100.00
$117.00
$131.00
$165.00
$77.00
$82.00
$89.00
$104.00
$113.00
$131.00
$150.00
Catalog#
W-12611
W-12612
W-10732
W-10733
W-10734
W-10735
W-10736
W-10737
W-10738
W-12613
W-12614
W-12615
W-12616
W-12617
W-12313
W-12314
W-12308
W-12309
W-12310
W-12618
W-12619
W-12620
W-12621
W-12622
Size
24"x18"
24"x20"
24"x24"
30"x4"
30"x6"
30"x8"
30"x10"
30"x12"
30"x14"
30"x16"
30"x18"
30"x20"
30"x24"
30"x30"
36"x6"
36"x8"
36"x10"
36"x12"
36"x14"
36"x16"
36"x18"
36"x20"
36"x24"
36"x30"
List$
$174.00
$196.00
$228.00
$93.00
$102.00
$113.00
$126.00
$139.00
$160.00
$182.00
$209.00
$241.00
$289.00
$349.00
$127.00
$137.00
$151.00
$166.00
$200.00
$222.00
$248.00
$289.00
$349.00
$448.00
STEEL AUXILIARY MOUNTING FRAME - Conversion From T-Bar to Surface
MODEL SMF 24" x 24"
• Enables fast and efficient installation of a T-Bar diffuser
or grille in a hard or plaster ceiling.
• Easy and simple installation.
• Allows easy access to ceiling plenum space.
• Wide flange provides a clean look.
• Mounting hardware included.
• Recommended ceiling opening is module size plus 1/4".
MINIMUM CEILING OPENING
NOMINAL PANEL
PLUS 1/4" (3)
T-BAR UNIT IS ORDERED SEPARATELY
1/4" (6)
NOM PANEL SIZE LESS 1/4" (6)
1-1/4"
(32)
NOMINAL PANEL SIZE PLUS 1-1/2" (38)
SMF
Catalog#
W-11375
List$
$42.00
30
ALUMINUM EGG-CRATE RETURN GRILLE - Lay-In and Surface Mount
MODEL CRE5OO-LT AND CRE5OO-SF SURFACE MOUNT
•
•
•
•
Aluminum cube core 1/2" x 1/2" x 1/2".
Aluminum 1-1/4" flat frame with screw holes.
T-bar units stocked with 24" x 24" panels.
Furnished with countersunk screw holes and
mounting screws for surface mount units.
CRE5OO-LT
CRE500-LT, EGG-CRATE
RETURN GRILLE, LAY-IN
Catalog#
W-10291
W-10292
W-10293
W-10294
W-10295
W-10296
W-10297
W-10298
W-10299
W-10300
Size
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
20"x20"
22"x22"
46"x22"
List$
$72.00
$76.00
$80.00
$86.00
$95.00
$102.00
$116.00
$130.00
$94.00
$221.00
CRE5OO-SF
CRE500-SF, EGG-CRATE
RETURN GRILLE, SURFACE MOUNT
Catalog#
W-10279
W-10280
W-10281
W-10282
W-10283
W-10284
W-10285
W-10286
W-10287
W-10288
W-10289
Size
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
20"x20"
22"x22"
24"x24"
46"x22"
List$
$21.00
$24.00
$28.00
$34.00
$43.00
$51.00
$65.00
$79.00
$94.00
$114.00
$221.00
Duct plus 1 3/4"
Duct minus 3/4"
1 1/4"
3/16"
A
B
Optional
Opposed Blade
Damper
Ceiling Module Size
minus 1/4"
Duct minus 1/2"
Nominal Duct Size
LT - Lay in T - Bar Detail
Side View / Damper Detail, SF Frame
*minimum wall or ceiling opening for SF is Duct plus 1/8"
SINGLE DEFLECTION MULTI-SHUTTER SUPPLY REGISTERS
STEEL SUPPLY REGISTER - EXPOSED OR SIDEWALL SURFACE MOUNT
Catalog#
900V
• Steel adjustable vertical
face bars.
• Multi-louver damper included.
31
W-10746
W-10747
W-10748
W-10749
W-10750
W-10751
W-10752
W-10753
W-10754
W-10755
W-10756
W-10757
W-10758
W-10759
W-10760
W-10761
W-10762
W-10763
W-10764
W-10765
W-10766
W-10767
W-10768
W-10769
W-10770
Size
6"x6"
8"x4"
8"x6"
8"x8"
10"x4"
10"x6"
10"x8"
10"x10"
12"x4"
12"x6"
12"x8"
12"x10"
12"x12"
14"x4"
14"x6"
14"x8"
14"x10"
14"x12"
14"x14"
16"x4"
16"x6"
16"x8"
16"x10"
16"x12"
16"x14"
Order Desk: (323) 728-0004
List$
$36.00
$30.00
$36.00
$36.00
$36.00
$36.00
$46.00
$46.00
$36.00
$46.00
$46.00
$52.00
$52.00
$46.00
$46.00
$52.00
$52.00
$59.00
$65.00
$46.00
$52.00
$52.00
$59.00
$65.00
$75.00
Catalog#
W-10771
W-10772
W-10773
W-10774
W-10775
W-10776
W-10777
W-10778
W-10779
W-10780
W-10781
W-10782
W-10783
W-10784
W-10786
W-10787
W-10788
W-10789
W-10790
W-10791
W-12376
W-12631
W-12632
W-12633
W-12634
W-12635
W-12337
Size
16"x16"
18"x4"
18"x6"
18"x8"
18"x10"
18"x12"
18"x14"
18"x18"
20"x4"
20"x6"
20"x8"
20"x10
20"x12"
20"x14"
24"x4"
24"x6"
24"x8"
24"x10"
24"x12"
24"x14"
24"x24"
30"x4"
30"x6"
30"x8"
30"x10"
30"x12"
30"x14"
List$
$88.00
$46.00
$52.00
$59.00
$65.00
$75.00
$81.00
$104.00
$52.00
$59.00
$65.00
$75.00
$81.00
$88.00
$59.00
$65.00
$81.00
$81.00
$97.00
$104.00
$184.00
$75.00
$88.00
$104.00
$104.00
$126.00
$133.00
DOOR LOUVERS
STEEL FIRE RATED 1900A DOOR LOUVER
STEEL NON-RATED 700A DOOR LOUVER
The 1900A is is constructed of
16 gauge steel and the 700A is
constructed of 18 gauge steel.
Both have a bronze baked enamel
finish.
700A
1900A
1900A, Steel, Fire-Rated
Catalog#
W-11315
W-11316
W-11317
W-11318
W-11319
W-11320
W-11321
W-11322
Size
12x12
14x14
16x16
18x12
18x18
24x12
24x18
24x24
List$
$367.00
$410.00
$436.00
$408.00
$455.00
$467.00
$523.00
$527.00
700A, Steel, Non-Rated
Catalog#
W-11307
W-11308
W-11309
W-11310
W-11311
W-11312
W-11313
W-11314
Size
12x12
14x14
16x16
18x12
18x18
24x12
24x18
24x24
List$
$159.00
$171.00
$193.00
$181.00
$212.00
$212.00
$264.00
$335.00
• #8 x 3/4 Phillips screw fasteners.
• 1900A UL fire rated for use in fire doors
with up to a 1-1/2 hour rating
• Free area: 50%-700A, 45%-1900A.
2" DEEP STEEL LOUVER
EXTERIOR 2" DEEP SL245-F BONDERIZED STEEL LOUVER
SL245-F
2" Steel louver has a bonderized 26 gauge steel frame and blades with
a 45 degree blade profile. It features all spot welded construction.
Steel Louver, Flanged Frame
Catalog#
W-12357
W-11323
W-11324
W-11325
W-11326
W-11327
W-11328
W-11329
Size
8x8
10x10
12x12
14x14
16x16
18x18
20x20
24x24
List$
$47.00
$50.00
$54.00
$61.00
$68.00
$75.00
$89.00
$128.00
•
•
•
•
•
45 degree blade profile.
Slim 2" deep profile.
1-1/2" bonderized steel flange standard.
1/4" mesh bird screen standard.
All units supplied 1/4" under nominal size.
32
ROUND OPPOSED BLADE DAMPER - For Round Neck Applications
• Blades are gang-operated
via flat blade
screwdriver from below.
• Steel construction.
• Gray baked enamel finish.
Catalog#
Size
6"
8"
10"
12"
W-10272
W-10273
W-10274
W-10275
List$
$28.00
$29.00
$31.00
$33.00
Round Opposed Blade Dampers
snap into position in diffusers
without requiring the use of tools,
for a more efficient installation.
RON
SQUARE OPPOSED BLADE DAMPER - For Square Neck Diffusers and Grilles
MODEL SOBD
SOBD
Catalog#
• Gang-operated blades.
• Damper operates with medium size flat
blade screwdriver.
• Electrogalvanized steel construction.
• Tools-free mounting
• Includes mounting pins. Pins install by
finger pressure.
MODEL SMOBD - For use with SQD, M, PR & PV Series
SMOBD
ROUND NECK OPPOSED BLADE DAMPER
MODEL ROD
33
6"x6"
8"x8"
10"x10"
12"x12"
14"x14"
16"x16"
18"x18"
20"x20"
22"x22"
24"x24"
Catalog#
Size
6”
8”
9”
10”
12”
14”
15”
16”
18”
20”
21”
22”
24”
Catalog#
• Blades are gang-operated for
quick adjustment.
• Adjustment is via flat-blade
screwdriver from below the face
of the diffuser.
• Duct mounted, not recommended
for use in flexible ducts.
ROD
W-10252
W-10254
W-10258
W-10260
W-10263
W-10265
W-10266
W-10268
W-10270
W-10271
W-12654
W-12665
W-12655
W-12666
W-12656
W-12667
W-12657
W-12668
W-12658
W-12669
W-12659
W-12670
W-12671
• Gang-operated blades.
• Damper operates with medium size flat
blade screwdriver.
• Electrogalvanized steel construction.
• Tools-free mounting
• Includes mounting pins. Pins install by
finger pressure.
Size
W-12637
W-12638
W-12639
W-12640
W-12641
W-12642
W-12643
W-12644
W-12645
Standard finish is 6"-12" Mill
or 14"-24" Black enamel
Order Desk: (323) 728-0004
x
x
x
x
x
x
x
x
x
x
x
x
x
6”
8”
9”
10”
12”
14”
15”
16”
18”
20”
21”
22”
24”
Size
6"
8"
10"
12"
14"
16"
18"
20"
24"
List$
$18.00
$20.00
$27.00
$30.00
$37.00
$45.00
$55.00
$63.00
$72.00
$83.00
List$
$18.00
$27.00
$27.00
$30.00
$30.00
$45.00
$45.00
$55.00
$55.00
$72.00
$72.00
$83.00
$83.00
List$
$25.00
$27.00
$29.00
$31.00
$37.00
$56.00
$63.00
$71.00
$84.00
Order Desk: (323) 728-0004
SHEET METAL FITTINGS
CATALOG SUPPLEMENT
ADJUSTABLE 90°ELBOWS
• Galvanized 26 & 24 Gauge
• Short Radius
Catalog#
W-12696
W-12697
W-12698
W-12699
W-12700
W-12701
W-12702
Size
6"
8"
10"
12"
14"
16"
18"
Gauge
26
26
26
26
24
24
24
List$
$6.10
$7.40
$10.35
$14.45
$21.30
$28.65
$31.95
DUCT HANGING SYSTEMS
• Duct Strapping
• Support Webbing
• Hangar Strapping with or without Holes
Catalog#
W-12775
W-12776
W-12777
W-12778
W-12779
W-12751
W-12752
Size
36"
36"
48"
48"
Roll
80"
80"
Item
Natural, 50/Bag
Black, 50/Bag
Natural, 50/Bag
Black, 50/Bag
Black, 1-3/4" x 300’
1-1/2"- No Holes
1-1/2"-W/Holes
List$
$79.45
$93.20
$113.15
$137.55
$10.50
$20.65
$22.55
DUCT SEALANTS
Catalog#
Model
Size
List$
W-12771
W-12772
W-12773
W-12774
DP1010
DP1020
DP77
Gallon Can
Gallon Can
Spray Can
2" Paint Brush
$38.85
$38.85
$14.20
$2.20
Catalog#
Pack
Size
List$
FASTENERS
• TEK, Washer Base Screw
• Plated Steel
W-12753
W-12754
W-12755
500
500
500
#10 x 1/2"
#10 x 3/4"
#10 x 1"
$25.00
$25.00
$25.00
FLEX DUCT
• Metalized Silver Jacket
• 25' Lengths, Raw Ends, Bagged
• R-4.2 Rated
Size
6"
8"
10"
12"
14"
16"
$56.85
$69.00
$82.75
$99.10
$120.10
$141.95
Catalog#
Size
List$
W-12756
W-12757
W-12758
W-12759
W-12760
W-12761
• Metalized Silver Jacket
• 7' Lengths, Collared
• R-4.2 Rated
SADDLE TAPS
Catalog#
6"
8"
10"
12"
14"
16"
W-12762
W-12763
W-12764
W-12765
W-12766
W-12767
Catalog#
• Galvanized 24 or 26 Gauge
• Made for Round Duct
W-12733
W-12734
W-12735
W-12736
W-12737
Gauge
Size
26
26
26
26
24
6"
8"
10"
12"
14"
List$
$79.45
$93.20
$113.15
$137.55
$142.00
$162.00
List$
$18.20
$20.50
$22.80
$25.95
$35.15
SEALANTS
• HVAC Tapes, UL Rated
SPIRAL PIPE
Catalog#
W-12768
W-12769
W-12770
• 7'-1/2" Lengths for jobsite elevator mobility
• Crimped on one end
Model
1599B
1599B
1581A
Catalog#
W-12745
W-12746
W-12747
W-12748
W-12749
W-12750
Size
Silver Poly Tape, 2” x 120 yds
Black Poly Tape, 2” x 120 yds
Silver Foil Tape, 2.5" x 60 yds
Size
6"
8"
10"
12"
14"
16"
Gauge
28
28
28
28
28
26
List$
$79.45
$93.20
$113.15
List$
$36.60
$45.95
$57.90
$70.20
$81.05
$103.80
START COLLARS
Catalog#
• Galvanized 26 & 24 Gauge
• 45° Tap
Catalog#
W-12738
W-12739
W-12740
W-12741
W-12742
W-12743
W-12744
Size
6"
8"
10"
12"
14"
16"
18"
Gauge
26
26
26
26
24
24
24
List$
$2.15
$2.80
$3.35
$4.05
$6.60
$7.40
$9.20
TEE-WYE
W-12703
W-12704
W-12705
W-12706
W-12707
W-12708
W-12709
W-12710
W-12711
W-12712
W-12713
W-12714
W-12715
W-12716
W-12717
W-12718
W-12719
W-12720
W-12721
W-12722
W-12723
W-12724
W-12725
W-12726
W-12727
W-12728
W-12729
W-12730
W-12731
W-12732
Size
6x6x6
8x6x6
8x8x6
8x8x8
10x8x6
10x8x8
10x10x8
10x10x10
12x10x8
12x10x10
12x12x10
12x12x12
14x12x10
14x12x12
14x14x10
14x14x12
14x14x14
16x12x10
16x14x10
16x14x12
16x14x14
16x16x12
16x16x14
16x16x16
18x16x12
18x16x14
18x16x16
18x18x12
18x18x14
18x18x16
Gauge
26
26
26
26
26
26
26
26
26
26
26
26
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
List$
$13.30
$16.10
$16.10
$16.10
$21.15
$21.15
$21.15
$21.15
$22.55
$22.55
$22.55
$22.55
$30.10
$30.10
$30.10
$30.10
$30.10
$39.50
$39.50
$39.50
$39.50
$39.50
$39.50
$39.50
$50.25
$50.25
$50.25
$50.25
$50.25
$50.25
05/2013
6490 Fleet Street • Commerce, CA 90040 • Phone: 323-728-0004 • Fax: 323-889-4825
www.airprodsales.com
DIRECTORY
Order Desk: (323) 728-0004
Name
Ext
Phone
Fax
Email
Fitz Callender
102
323-869-3850
323-888-4154
[email protected]
[email protected]
Operations Manager
Adam De La Garza
115
323-869-3864
323-889-4825
[email protected]
Inside Sales
Anthony Garcia
114
Bud Ream
117
Management
Jim Turner
Sales
101
323-869-3843
323-889-6741
Title
Vice President/GM
Alexander (Carlos) Gomez 119
323-728-0004
323-889-4825
[email protected]
Inside Sales Engineer
Bob Bissell
105
323-728-0004
323-889-4825
[email protected]
Sales Engineer
121
323-728-0004
323-889-4825
[email protected]
Sales Engineer
118
323-728-0004
323-889-4825
[email protected]
Sales Engineer
Carlos Gonzalez
Herman Perea
Joe Yarrington
Mike Lopez
Mike Rodriguez
Ruben Aguirre
Scott Woodworth
Accounts Receivable
Carol Estrada
Engineering
122
111
112
110
323-728-0004
323-728-0004
323-728-0004
323-728-0004
323-728-0004
323-889-4825
323-889-4825
323-889-4825
[email protected]
[email protected]
[email protected]
Inside Sales
Sales Engineer
Inside Sales Engineer
323-889-4825
[email protected]
Sales Engineer
323-889-4825
[email protected]
Outside Sales
323-889-4825
[email protected]
Sales Engineer
123
323-728-0004
323-889-4825
[email protected]
Sales Engineer
108
323-728-0004
323-888-6485
[email protected]
Billing - A/R
909-860-9844
909-271-3505
[email protected]
Mechanical Engineer
Shereen Morcos, P.E.
Estimating
323-728-0004
Alexis Urtiz
107
323-728-0004
323-889-4825
[email protected]
Estimator
Lupe Cosio
109
323-728-0004
323-889-4825
[email protected]
Estimator
Joel Perales
Martha Ponce
Purchasing
120
113
323-728-0004
323-728-0004
323-889-4825
323-889-4825
[email protected]
[email protected]
Estimator
Estimator
Patricia Kocsis
106
323-869-3846
323-888-4132
[email protected]
Purchasing
Arturo Espinoza
116
323-728-0004
323-889-4825
[email protected]
Warehouse Driver
Warehouse
Christian Martinez
116
323-728-0004
323-889-4825
[email protected]
Warehouse Driver
Date:
Mail to: POTTORFF - AIR PRODUCT SALES
6490 Fleet Street
Commerce, CA 90040
Fax to: 323-889-4825
ORDER FORM
Customer Acct #:
Order Desk: (323) 728-0004
BILL THIS ORDER TO:
SHIP THIS ORDER TO:
Address:
Address:
Name:
Name:
City:
State:
Phone:
City:
Zip:
Phone:
Model #
METHOD OF PAYMENT
(Please circle)
Check
Card#
Money Order
Exp. Date:
Signature:
(if different than billing addess)
State:
Zip:
E-mail:
E-mail:
Catalog
Number
PO #:
Tax Exemption #:
Quantity
Ordered
Description of Product
VISA MASTERCARD
AMER/EXPRESS
Credit Card
DISCOVER
Price
per unit
Total
Price
SUBTOTAL:
TAX:
TOTAL:
THANK YOU FOR YOUR ORDER!

MANUFACTURERS REPRESENTATIVES

Transcription

Similar documents

2013 VOL. 1.0

Life Safety Dampers

® DIBD23 CURTAIN TYPE DYNAMIC FIRE DAMPERS