Abrasive Mounted Stones Abrasive Mounted

Transcription

Abrasive Mounted Stones
www.usdentaldepot.com - [email protected] - 1 1-866-625-5558 - 1-954-874-6325
MOUNTED POINT STONES ( Ecco )
BLUE POINTS
Blue Stones for chrome cobalt alloys and non-precious metals
Price
+
100926
Code
ECCO - ECCO B030 Blue Mounted Points Tapered large #4 x 100pk - for poecelain and proce...
Name
US$ 14.00
+Info
100991
ECCO - ECCO B040 Blue Mounted Points Taper T-4 x 100pk - for porcelain and porcelain a...
US$ 14.00
+Info
100927
ECCO - ECCO B050 Blue Mounted Points Inverted Cone I-3 x 100pk - for porcelain and por...
US$ 14.00
+Info
100990
ECCO - ECCO B060 Blue Mounted Points Invereted Cone large I-6 x 100pk - for porcelain a...
US$ 14.00
+Info
100989
ECCO - ECCO B070 Blue Mounted Points Knife Edge K-7 x 100pk - for porcelain and porcela...
US$ 14.00
+Info
100582
ECCO - ECCO B080 Blue Mounted Points Barrel large C-6 x 100pk - for porcelain and porc...
US$ 14.00
+Info
101000
ECCO - ECCO B010 Blue Mounted Points Barrel Medium C-6 x 100pk - for porcelain and por...
US$ 14.00
+Info
100571
ECCO - ECCO B020 Blue Mounted Points Barrel Small x 100pk - for porcelain and porcelai...
US$ 14.00
+Info
CORAL POINTS
RED(CORAL) STONES for chrome cobalt alloys and non-precious
metals
Price
+
100983
Code
ECCO - ECCO C011 Coral Mounted Points Wheel medium W-4 x 100pk - for porcelain and porc...
Name
US$ 14.00
+Info
100023
ECCO - C020 Coral Mounted Points Tapered T-4 x 100pk - for porcelain and porcelain all...
US$ 14.00
+Info
100985
ECCO - ECCO C030 Coral Mounted Points Flame small F-2 x 100pk - for porcelain and porc...
US$ 14.00
+Info
100021
ECCO - C039 Coral Mounted Points C-4 x 100pk - Small Barrel ...
US$ 14.00
+Info
100984
ECCO - ECCO C042 Coral Mounted Points Invereted Cone large I-6 x 100pk - for porcelain ...
US$ 14.00
+Info
100020
ECCO - C059 Coral Mounted Points C-6 x 100pk - Large Barrel ( cylinder ) for porcelain...
US$ 14.00
+Info
GREEN POINTS
Green Stones Excellent for porcelain, gold, silver alloys, amalgam
and composites
Code
100979
21/05/2010 / 1284
Name
ECCO - ECCO G009 Green Mounted Points Concave Small I-7 x 100pk - for porcelain and po...
Price
+
US$ 14.00
+Info
1
501-1631198
ECCO - ECCO G010 Green Mounted Points Knife Edge K-7 x 100pk - for porcelain and porcel...
US$ 14.00
+Info
ECCO - ECCO G011 Green Mounted Points Wheel Medium W-4 x 100pk - for porcelain and por...
US$ 14.00
+Info
501-1631207
ECCO - ECCO G013 Green Mounted Points Flame large P-2 x 100pk - for porcelain and por...
US$ 14.00
+Info
501-1631205
ECCO - ECCO G019 Green Mounted Points Inverted Cone small I-3 x 100pk - for porcelain a...
US$ 14.00
+Info
501-1631196
ECCO - ECCO G020 Green Mounted Points Tapered Large T-4 x 100pk - for porcelain and por...
US$ 14.00
+Info
501-1631201
ECCO - ECCO G022 Green Mounted Points Wheel large W-6 x 100pk - for porcelain and porce...
US$ 14.00
+Info
501-1631203
ECCO - ECCO G028 Green Mounted Points Flame small F-2 x 100pk - for porcelain and por...
US$ 14.00
+Info
100980
ECCO - ECCO G033 Green Mounted Points Concave large I-9 x 100 pk - for porcelain and po...
US$ 14.00
+Info
501-1631202
ECCO - ECCO G039 Green Mounted Points Barrel short small C-4 x 100pk - for porcelain an...
US$ 14.00
+Info
501-1631210
ECCO - ECCO G042 Green Mounted Points Invereted Cone large I-6 x 100pk - for porcelain ...
US$ 14.00
+Info
501-1631208
ECCO - ECCO G044 Green Mounted Points Flat End Tapered small T-1 x 100pk - for porcelai...
US$ 14.00
+Info
501-1631200
ECCO - ECCO G053 Green Mounted Points Wheel small W-3 x 100pk - for porcelain and porce...
US$ 14.00
+Info
501-1631197
ECCO - ECCO G059 Green Mounted Points Barrel Large C-6 x 100pk - for porcelain and por...
US$ 14.00
+Info
100569
PINK POINTS
PINK STONES for precious ceramic alloys
Price
+
100981
Code
ECCO - ECCO P011 Pink Mounted Points Wheel W-6 x 100pk - for porcelain and porcelain a...
Name
US$ 14.00
+Info
100022
ECCO - P020 Pink Mounted Points Taper T-4 x 100pk - for porcelain and porcelain alloys...
US$ 14.00
+Info
100570
ECCO - ECCO P030 Pink Mounted Points Flame F-2 x 100pk - for porcelain and porcelain a...
US$ 14.00
+Info
100019
ECCO - P039 Pink Mounted Points Barrel small C-4 x 100pk - for porcelain and porcelain ...
US$ 14.00
+Info
100982
ECCO - ECCO P042 Pink Mounted Points Invereted Cone large I-6 x 100pk - for porcelain a...
US$ 14.00
+Info
100018
ECCO - P059 Pink Mounted Points Barrel large C-6 x 100pk - for porcelain and porcelain ...
US$ 14.00
+Info
WHITE POINTS
WHITE STONES for non-precious metals
Price
+
100986
Code
ECCO - ECCO W011 White Mounted Points Wheel Medium W-4 x 100pk - for porcelain and por...
Name
US$ 14.00
+Info
100024
ECCO - ECCO W020 White Mounted Points Tapered T-4 x 100pk ...
US$ 14.00
+Info
100987
ECCO - ECCO W030 White Mounted Points Flame small F-2 x 100pk - for porcelain and porc...
US$ 14.00
+Info
100017
ECCO - W039 White Mounted Points Barrel small C-4 x 100pk - for porcelain and porcelain...
US$ 14.00
+Info
100988
ECCO - ECCO W042 White Mounted Points Invereted Cone large I-6 x 100pk- for porcelain a...
US$ 14.00
+Info
100016
ECCO - W059 White Mounted Points Barrel large C-6 x 100pk - for porcelain and porcelain...
US$ 14.00
+Info
Price
+
Abrasive Wheels unMonuted
UNMOUNTED STONE WHEELS ( Ecco )
Cut Off Disk, Pin Cutters & Roughing Disks
Code
2
Name
21/05/2010 / 1284
501-0004
ECCO - ECCO #3 White Stone Wheel W303 - 100pk -19mm x 4mm Piedra Blanca Rueda -...
US$ 16.00
+Info
501-0002
ECCO - ECCO #3 Green Stone Wheel G303 - 100pk -19mm x 4mm Piedra Verde Rueda -...
US$ 16.00
+Info
501-0003
ECCO - ECCO #2 White Stone Wheel W302 - 100pk -19mm x 3mm Piedra Blanca Rueda -...
US$ 16.00
+Info
501-0001
ECCO - ECCO #2 Green Stone Wheel G302 - 100pk -19mm x 3mm Piedra Verde Rueda -...
US$ 16.00
+Info
Heatless Wheels
HEATLESS STONE WHEELS ( Kesytone )
Keystone Heatless Unmonuted
- For alloy and Porcelain
-White , Regular and Red
HEATLESS STONE WHEELS RED (Kesytone)
Price
+
101128
Code
KEYSTONE - #1 Mizzy Heatless Wheels - Red - 50pk - - 3/16 Inch X 4.8Mm -...
Name
US$ 18.86
+Info
101129
KEYSTONE - #3 Mizzy Heatless Wheels - Red -50pk - 3/32 Inch X 2.4Mm -...
US$ 19.76
+Info
6131605
KEYSTONE - #5 Mizzy Heatless Wheels - Red - 50pk - 7/8in x 3.1Mm - ...
US$ 18.86
+Info
KEYSTONE - #8 Mizzy Heatless Wheels - Red 50pk - 3/4in x 3.1Mm -...
US$ 19.76
+Info
034-6131608
HEATLESS STONE WHEELS WHITE (Kesytone)
Price
+
034-6150100
Code
KEYSTONE - #1 Mizzy Heatless Wheels - White 50pk - 1in x 4.8Mm -...
Name
US$ 18.52
+Info
034-6150200
KEYSTONE - #2 Mizzy Heatless Wheels - White 50pk - 1in x 3.1Mm - ...
US$ 18.52
+Info
034-6150300
KEYSTONE - #3 Mizzy Heatless Wheels - White 50pk - 1in x 2.4Mm - ...
US$ 18.52
+Info
034-6150400
KEYSTONE - #4 Mizzy Heatless Wheels - White 50pk - 7/8in x 4.8Mm - ...
US$ 18.52
+Info
034-6150500
US$ 18.52
+Info
034-6150600
US$ 18.52
+Info
Knock Down Wheels
KNOCK DOWN STONE WHEELS ( Keystone )
To be used in Lathes with Stone chucks
Code
034-1900090
21/05/2010 / 1284
Name
KEYSTONE - White Acrylic Knock-Down Wheels - 4 x 1/2in (101 x 12.7 mm) - sold by each - 3...
Price
+
US$ 8.74
+Info
3
Knock Down Wheels
034-1900080
KEYSTONE - White Acrylic Knock-Down Wheels - 3 x 3/8in (79 x 9.5 mm) - sold by each - 36-46...
US$ 6.80
+Info
Acrylic Orthodontic
O-CRYL Ortho Polymer
- OrthoEletric Polymers produce appliances in brillant electric colors.
- OrthoElectric colors are variegated - blazing color in various shades with GLITTER.
Price
+
102463
Code
ECCO - O-CRYL Ortho polymer Crystal Pink 60gr with Glitter- self curing acrylic powder ...
Name
US$ 9.00
+Info
105051
ECCO - O-CRYL Ortho polymer Crystal Clear 60gr with Glitter- self curing acrylic powder...
US$ 9.00
+Info
105052
ECCO - O-CRYL Ortho polymer Crystal Fushia 60gr with Glitter- self curing acrylic powd...
US$ 9.00
+Info
105053
ECCO - O-CRYL Ortho polymer Crystal Lemon 60gr with Glitter- self curing acrylic powde...
US$ 9.00
+Info
105054
ECCO - O-CRYL Ortho polymer Crystal Green 60gr with Glitter - self curing acrylic powd...
US$ 9.00
+Info
105055
ECCO - O-CRYL Ortho polymer Crystal Yellow 60gr with Glitter- self curing acrylic powd...
US$ 9.00
+Info
105056
ECCO - O-CRYL Ortho Polymer Kit - 6 Bottles x 60grs - All Shades included ...
US$ 45.00
+Info
Acrylics Heatcure
HEAT CURE ( Opticryl )
- Colombian Fine Denture Acrylic
- Avaliable in 1lb, 5lb, and 22lb Packages
- Highly Reistant to Fractures
- Vivid Ortho Colors
Code
4
Price
+
100403
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 500gr/1lb Shade: Light Pink Veined + 8oz m...
Name
US$ 21.00
+Info
100404
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 500gr/1lb Shade: Clear + 8oz monomer ...
US$ 21.00
+Info
100402
OPTICRYL - Opti-cryl Heat Curing Acrylic - 1lb/500gr Shade: Original + 8oz monomer ...
US$ 22.95
+Info
100416
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 500gr/1lb Shade: Meharry Veined + 8oz mon...
US$ 22.95
+Info
100417
OPTICRYL - Opti-cryl Heat Curing Acrylic - 500gr/1lb Shade: Dark Pink Veined + 8oz monomer ...
US$ 22.95
+Info
100405
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 5Lb/2.5kg Shade: Meharry Veined + 1Quartz ...
US$ 78.30
+Info
100413
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 5Lb/2.5kg Shade: Light Pink Veined + 1Quar...
US$ 78.30
+Info
100414
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 5Lb/2.5kg Shade: Clear + 1Quartz monomer ...
US$ 78.30
+Info
100407
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 5Lb/2.5kg Shade: Dark Pink Veined + 1Quart...
US$ 78.30
+Info
100412
OPTICRYL - Opti-cryl Heat Curing Acrylic - 5Lb/2.5kg Shade: Original + 1Quartz monomer ...
US$ 83.00
+Info
100418
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 22lb/10kg Shade: Meharry Veined + 4Quartz ...
US$ 267.00
+Info
100419
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 22lb/10kg Shade: Light Pink Veined + 4Quar...
US$ 267.00
+Info
100421
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 22lb/10kg Shade: Clear + 4Quartz monomer ...
US$ 267.00
+Info
100422
OPTICRYL - Opti-cryl Heat Curing Acrylic - 22lb/10kg Shade: Dark Pink Veined + 4Quartz mono...
US$ 267.00
+Info
100420
OPTICRYL - Opti-cryl Heat Curing Acrylic - 22lb/10kg Shade: Original + 4Quartz monomer ...
US$ 283.00
+Info
21/05/2010 / 1284
Acrylics Heatcure
OPTICRYL HEAT CURE POWDER ONLY
- A superior quality hightly impact-resistent denture material with excellent working properies.
- Available in 4 esthetic, cadmium free shades with matching repair.
- Perfomance guarantee.
- Save more than 50% over leading brands of similar quality.
Price
+
103099
Code
OPTICRYL - Opti-cryl Heat Curing Acrylic - 1lb/500gr Shade: Original Powder Only ...
Name
US$ 18.00
+Info
105102
OPTICRYL - Opti-cryl Heat Curing Acrylic - 500gr/1lb Shade: Dark Pink Veined Powder Only ...
US$ 18.00
+Info
105107
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 500gr/1lb Shade: Clear Powder Only ...
US$ 18.00
+Info
105108
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 500gr/1lb Shade: Light Pink Veined Powder ...
US$ 18.00
+Info
105109
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 500gr/1lb Shade: Meharry Veined Powder On...
US$ 18.00
+Info
105103
OPTICRYL - Opti-cryl Heat Curing Acrylic - 5Lb/2.5kg Shade: Original Powder Only ...
US$ 65.00
+Info
105110
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 5Lb/2.5kg Shade: Clear Powder Only ...
US$ 65.00
+Info
105111
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 5Lb/2.5kg Shade: Dark Pink Veined Powder O...
US$ 65.00
+Info
105112
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 5Lb/2.5kg Shade: Light Pink Veined Powder ...
US$ 65.00
+Info
105113
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 5Lb/2.5kg Shade: Meharry Veined Powder Onl...
US$ 65.00
+Info
105100
OPTICRYL - Opti-cryl Heat Curing Acrylic - 22lb/10kg Shade: Dark Pink Veined Powder Only ...
US$ 195.00
+Info
105101
OPTICRYL - Opti-cryl Heat Curing Acrylic - 22lb/10kg Shade: Original Powder Only ...
US$ 199.00
+Info
105104
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 22lb/10kg Shade: Clear Powder Only ...
US$ 195.00
+Info
105105
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 22lb/10kg Shade: Light Pink Veined Powder ...
US$ 195.00
+Info
105106
OPTICRYL - Opti-cryl Heat Curing Acrylic Resin - 22lb/10kg Shade: Meharry Veined Powder Onl...
US$ 195.00
+Info
Acrylics High Impact
HEAT CURE ( Diamond-D )
*Ultra Impact Acrylic
*Available in 1lb, 5lb, and 25lb Packages
Price
+
1013063
Code
DIAMOND - Diamond-D Heat Cure Light Reddish Pink - 1Lb Powder/8oz. Liquid - Keystone ...
Name
US$ 50.90
+Info
1013113
DIAMOND - Diamond-D Heat Cure 5Lb/1Qt - Dark Veined - -5Lb powder acrylic with 1 quart he...
US$ 158.43
+Info
1013068
DIAMOND - Diamond-D Heat Cure - 5Lb/1Qt - Chroma Essence - -5Lb powder acrylic and 1 qua...
US$ 158.43
+Info
1013114
DIAMOND - Diamond-D Hat Cure 25Lb/4Qts - Dark Veined- -25Lb powder acrylic with 4 quarts ...
US$ 549.30
+Info
1013065
DIAMOND - Diamond-D Heat Cure - 5Lb/1Qt - Original Heat - - 5Lb powder acrylic with 1 qua...
US$ 158.43
+Info
1013066
DIAMOND - Diamond-D Heat Cure - 5Lb/1Qt - Light- -5Lb powder acrylic with 1 quart heat c...
US$ 158.43
+Info
1013069
DIAMOND - Diamond-D Heat Cure 25Lb/4Qts - Original - -25Lb powder acrylic with 4 quarts h...
US$ 549.30
+Info
1013071
DIAMOND - Diamond-D Heat Cure 25Lb/4Qts - Light Reddish Pink-- 25Lb powder acrylic with4 q...
US$ 549.30
+Info
1013070
DIAMOND - Diamond-DHeat Cure 25Lb/4Qts - Light Heat cure- -25Lb powder and 4 quarts heat ...
US$ 549.30
+Info
Acrylics Monomers
21/05/2010 / 1284
5
Acrylics Monomers
MONOMERS ( Opticryl )
*Avaliable in 8oz, 32oz, 1gal, 200L
Price
+
100247
Code
OPTICRYL - Monomer Self Cure only 8oz ( Acrylic Resin Liquid ) New Stetic + 6.75 us$ for ...
Name
US$ 12.00
+Info
100248
OPTICRYL - Self Cure Monomer Only 32oz ( Acrylic Resin Liquid ) New Stetic + 6.75 us$ for...
US$ 25.60
+Info
100912
OPTICRYL - Pour Monomer only 32oz ( Acrylic Resin Liquid ) New Stetic + 6.75 us$ for addi...
US$ 27.19
+Info
100249
OPTICRYL - Heat Cure Monomer Only 8oz ( Acrylic Resin Liquid ) New Stetic + 6.75 us$ for a...
US$ 10.50
+Info
100250
OPTICRYL - Heat Cure Monomer Only 32oz ( Acrylic Resin Liquid ) New Stetic + 6.75 us$ for...
US$ 22.10
+Info
103878
OPTICRYL - Opticryl Self Cure Monomer -1 gallon
US$ 34.35
+Info
Acrylics Pour
OPTICRYL- 100863 Pour Light Pink 22lb
US$ 267.00
- Pour Acrylic Resin - 22lb/10kg Shade
- Light Pink Veined + 4 Quartz of monomer -satisfaccion warranty
- Resina Acrilica Autopolimerizable
- Veracryl New Stetic - denture acrilyc acrilic acrilico rosa dentadura termo
OPTICRYL - 103098 Pour Light Pink 22lb Pwd.Only
US$ 195.00
OPTI-CRYL Pour Acrylic Resin
- 22lb/10kg Shade: Light Pink Veined Powder Only - satisfaccion warranty
- [NS#81192] Resina Acrilica Autopolimerizable
- Veracryl New Stetic - enture acrilyc acrilic acrilico rosa dentadura termo
Acrylics Selfcure
SELF CURE ( Diamond-D )
Diamond D Denture Acrylic
-To fabricate natural looking dentures it requires artistry, andtechnical expertise, as well as
materials to support thoseabilities.
- Diamond D was specially formulated to provideexceptional working characteristics, ultra
impact resistance,and flexural strength.
- The demand for better aesthetics andfunction in removable prosthetics is greater than
ever.
- Diamond D can provide your laboratory thehighest standards in denture acrylic tomeet the
challenge.
HERE IS WHY DIAMOND D ULTRA IMPACTIS A CUT ABOVE HI IMPACT ACRYLICS
- Superior tooth adhesion
- Exceptional flexural strength
- Advanced spectrophotometershade matching technology
- Shade and handling consistency
- Exceeds expectations in patientcomfort and natural aesthetics
- Cadmium and Phthalate Free
- Matching repair and reline resin available
AVAILABLE IN FOUR NATURAL LOOKINGAESTHETIC SHADES
- Original
- Light
- Light Reddish Pink
6
21/05/2010 / 1284
Acrylics Selfcure
- Chroma-Essence
- Dark Veined
Price
+
34-1013074
Code
DIAMOND - Self Cure Light 1lb+8oz Lq
Name
1 LB
Weight
US$ 50.90
+Info
34-1013075
DIAMOND - Self Cure Light Red 1lb+8oz
1 LB
US$ 50.90
+Info
34-1013073
DIAMOND - Self Cure Original 1lb+8oz Lq
1 LB
US$ 50.90
+Info
34-1013078
DIAMOND - Self Cure Light 5lb+32oz Lq
5 LB
US$ 192.46
+Info
34-1013079
DIAMOND - Self Cure L. Red Pink 5lb+32oz
5 LB
US$ 192.46
+Info
34-1013077
DIAMOND - Self Cure Original 5lb+32oz Lq
5 LB
US$ 192.46
+Info
34-1013082
DIAMOND - Self Cure Light 25lb+1gal Lq
25 LB
US$ 596.85
+Info
34-1013083
DIAMOND - Self Cure L. Red Pink 5lb+1gal
25 LB
US$ 596.85
+Info
34-1013081
DIAMOND - Self Cure Orig 25lb+1gal Lq
25 LB
US$ 596.85
+Info
DIAMOND D SELF CURE POWDER ONLY
Price
+
34-1013050
Code
DIAMOND - Self Cure Orig 1lb powder only
Name
US$ 40.95
+Info
34-1013051
DIAMOND - Self Cure Orig 5lb powder only
US$ 176.30
+Info
34-1013052
DIAMOND - Self Cure Orig 25lb powder onl
US$ 499.50
+Info
34-1013054
DIAMOND - Self C. Light 1lb powder only
US$ 40.95
+Info
34-1013055
DIAMOND - Self C. Light 5lb powder only
US$ 176.30
+Info
34-1013056
DIAMOND - Self C. Light 25lb powder onl
US$ 499.50
+Info
34-1013058
DIAMOND - Self C. L. Red Pi 1lb pow.only
US$ 40.95
+Info
34-1013059
DIAMOND - Self C. L. Red Pi 5lb pow.only
US$ 176.30
+Info
34-1013060
DIAMOND - Self C. L. Red Pi 25lb pow.onl
US$ 499.50
+Info
34-1013109
DIAMOND - Self C. Dark Ve. 1lb pow. only
US$ 40.95
+Info
34-1013110
DIAMOND - Self C. Dark Ve. 5lb pow. only
US$ 176.30
+Info
34-1013111
DIAMOND - Self C. Dark Ve. 25lb pow. onl
US$ 499.50
+Info
SELF CURE ( Opticryl )
- Colombian Fine Denture Acrylic
- Avaliable in 1lb, 5lb, and 22lb Packages
- Highly Reistant to Fractures
- Vivid Ortho Colors
Price
+
100400
Code
OPTICRYL - Opti-cryl Self Curing Acrilic Resin - 500Gr/1lb Shade: Clear + 8oz monomer ...
US$ 21.00
+Info
100429
OPTICRYL - Opti-cryl Self Acrylic Resin - 22Lb/10Kg Shade: Clear + 4Quartz of monomer ...
US$ 267.00
+Info
100410
OPTICRYL - Opti-cryl Self Curing Acrilic Resin - 5Lb/2.5 Kg Shade: Clear + 1Quartz ...
US$ 78.30
+Info
100406
OPTICRYL - Opti-cryl Self Curing Acrilic - 500Gr/1lb Shade: Dark Pink Veined + 8oz monomer ...
US$ 21.00
+Info
100426
OPTICRYL - Opti-cryl Self Acrylic REsin - 22Lb/10Kg Shade: Dark Pink Veined + 4Quartz of mo...
US$ 267.00
+Info
100415
OPTICRYL - Opti-cryl Self Curing Acrilic - 5Lb/2.5Kg Shade: Dark Pink Veined + 1Quartz mono...
US$ 78.30
+Info
100428
OPTICRYL - Opti-cryl Self Curing Acrilic - 500Gr/1lb Shade: Light Pink Veined + 8oz monomer...
US$ 22.95
+Info
100401
OPTICRYL - Opti-cryl Self Acrylic Resin - 22lb/10kg Shade: Light Pink Veined + 4Quartz mono...
US$ 267.00
+Info
100411
OPTICRYL - Opti-cryl Self Curing Acrilic Resin - 5Lb/2.5Kg Shade: Light Pink Veined + 1Quar...
US$ 78.30
+Info
100399
OPTICRYL - Opti-cryl Self Curing Acrilic Resin - 500Gr/1lb Shade: Meharry Veined + 8oz mono...
US$ 21.00
+Info
100424
OPTICRYL - Opti-cryl Self Acrylic Resin - 22Lb/10Kg Shade: Meharry Veined +4Quartz of monom...
US$ 267.00
+Info
100409
OPTICRYL - Opti-cryl Self Curing Acrilic Resin - 5Lb/2.5Kg Shade: Meharry Veined + 1Quartz ...
US$ 78.30
+Info
100398
OPTICRYL - Opti-cryl Self Curing Acrilic - 500Gr/1lb Shade: Original + 8oz monomer ...
US$ 22.95
+Info
100423
OPTICRYL - Opti-cryl Self Acrylic Resin - 22Lb/10Kg Shade: Original + 4Quartz of monomer ...
US$ 283.00
+Info
100408
OPTICRYL - Opti-cryl Self Curing Acrilic - 5Lb/2.5Kg Shade: Original + 1Quartz monomer ...
US$ 83.00
+Info
21/05/2010 / 1284
Name
7
Acrylics Selfcure
OPTICRYL SELFCURE POWDER ONLY
- Easy to mix, non slumping formula.
- Great bond strength makes it perfect for relines and repairs using salt and pepper or dough tecnique.
- A high quality, cadmium free acrylic offered at a significant saving.
- Performance guarantee.
Price
+
105119
Code
OPTICRYL - Opti-cryl Self Curing Acrilic - 500Gr/1lb Shade: Dark Pink Veined Powder Only ...
Name
US$ 18.00
+Info
105120
OPTICRYL - Opti-cryl Self Curing Acrilic - 500Gr/1lb Shade: Light Pink Veined Powder Only ...
US$ 18.00
+Info
105121
OPTICRYL - Opti-cryl Self Curing Acrilic - 500Gr/1lb Shade: Original Powder Only ...
US$ 18.00
+Info
105124
OPTICRYL - Opti-cryl Self Curing Acrilic Resin - 500Gr/1lb Shade: Clear Powder Only ...
US$ 18.00
+Info
105125
OPTICRYL - Opti-cryl Self Curing Acrilic Resin - 500Gr/1lb Shade: Meharry Veined Powder Onl...
US$ 18.00
+Info
105122
OPTICRYL - Opti-cryl Self Curing Acrilic - 5Lb/2.5Kg Shade: Dark Pink Veined Powder Only ...
US$ 65.00
+Info
105123
OPTICRYL - Opti-cryl Self Curing Acrilic - 5Lb/2.5Kg Shade: Original Powder Only ...
US$ 65.00
+Info
105126
OPTICRYL - Opti-cryl Self Curing Acrilic Resin - 5Lb/2.5 Kg Shade: Clear - Powder Only ...
US$ 65.00
+Info
105127
OPTICRYL - Opti-cryl Self Curing Acrilic Resin - 5Lb/2.5Kg Shade: Light Pink Veined Powder ...
US$ 65.00
+Info
105128
OPTICRYL - Opti-cryl Self Curing Acrilic Resin - 5Lb/2.5Kg Shade: Meharry Veined Powder Onl...
US$ 65.00
+Info
105114
OPTICRYL - Opti-cryl Self Acrylic Resin - 22Lb/10Kg Shade: Clear Powder Only ...
US$ 195.00
+Info
105115
OPTICRYL - Opti-cryl Self Acrylic REsin - 22Lb/10Kg Shade: Dark Pink Veined Powder Only ...
US$ 195.00
+Info
105116
OPTICRYL - Opti-cryl Self Acrylic Resin - 22lb/10kg Shade: Light Pink Veined Powder Only ...
US$ 195.00
+Info
105117
OPTICRYL - Opti-cryl Self Acrylic Resin - 22Lb/10Kg Shade: Meharry Veined Powder Only ...
US$ 195.00
+Info
105118
OPTICRYL - Opti-cryl Self Acrylic Resin - 22Lb/10Kg Shade: Original Powder Only ...
US$ 199.00
+Info
Acrylics Tooth Color
Acryl. Tooth Self
TOOTH COLOR SELF ( Novacryl )
- Self curing monomer must be used in it s reconsitution with self curing polymner
- For the formation in acrylic for repairing partial dental prosthesis
Composition
- By weight: two parts self curing polymer vercril and one part of self curing monomer
- By volume: three parts of self curing polymer vercril and one part of self curing monmer
Working time
- 3 to 5 minutes under a temperature of 23 degrees celciu
- Go to downloads for complete instructions
Price
+
109008
Code
NOVACRYL - Novacryl Selfcure 125gr col 59
Name
US$ 18.00
+Info
109002
US$ 18.00
+Info
109003
US$ 18.00
+Info
109004
US$ 18.00
+Info
109006
US$ 18.00
+Info
109007
US$ 18.00
+Info
109005
US$ 18.00
+Info
Adhesive
Cyanoacrylates
8
21/05/2010 / 1284
Adhesive
Cyanoacrylates
CYANOCRYLATE ADHESIVE ( Ecco )
Super Cyanoacrylate Adhesive
- Formulated to quickly bond plastics, metal, and ceramics.
- It offers excellent strength characteristics
Price
+
102427
Code
ECCO - ECCO Cyanoacrylate Adhesive Gel Type - 2oz --- ...
Name
US$ 10.70
+Info
102424
ECCO - ECCO Cyanoacrylate Thin Adhesive for Plastic Articulators - 2oz ...
US$ 10.70
+Info
102425
ECCO - ECCO Cyanoacrylate Medium Adhesive for Dowel Pins - 2oz ...
US$ 10.70
+Info
102426
ECCO - ECCO Cyanoacrylate Thick Adhesive for Broken Metals - 2oz ...
US$ 10.70
+Info
102428
ECCO - ECCO Activator Driers for Adhesive 8oz - Dries Instantly with mist spray - Adhes...
US$ 12.90
+Info
Alloys
Chrome Cobalt
CHROME COBALT CR-CO ( Bego )
- Quality Speaks for Itself
- Excellent Laser Welding Properties
- Easy to Process
- Co 63,5
- Cr 29
- Mo 5
For more info check our website www.usdentaldepot.com
Price
+
010-50030
Code
BEGO - Wironit - Co-Cr-Alloy - 1 kg ( B# 50030 ) Chrome Cobalt alloy - Made in Germany ...
Name
US$ 263.00
+Info
010-50060
BEGO - Wironit - Co-Cr-Alloy - 1 Kg( B# 50060 ) Chrome Cobalt alloy - Made in Germany...
US$ 263.00
+Info
CHROME COBALT CR-CO ( Dentalloys )
Chrome Coblat formulas for partials and ceramic restorations - Dental Alloy Products complies with the Good Manufacturing Practices of the US FDA.
- Where applicable, individual alloys are further certified to meet NIOM, ADA, or DIN standards.
- Third party certification of our Qualiry System means that our entire operation has been independantly audited to
meet international standards.
- The CE mark further confirms that the materials have been determined to be safe and effective for their intended
purpose.
SPER-100
Chrome Cobalt Nickel and Berilium Free. for Porcelain / Ceramics
Physical Properties:
FORMULA % of the weight : Co(61.0 % ),Cr(27.0% ),Mo(6.0 % ),W(5.0 % )
CTE : Expansion at 500C: 13.9 to 14.
21/05/2010 / 1284
9
Alloys
Chrome Cobalt
Burnout Temp C: 870
Code
Name
Price
+
US$ 56.00
+Info
DENTALLOYS - Super-100 Chrome Cobalt Molibdeno Ingot 1lb - Be & Ni Free for Ceramic rerstorat...
US$ 84.00
+Info
DENTALLOYS - Super-100 Chrome Cobalt Molibdeno Ingot 1kg - Be & Ni Free for Ceramic rerstorat...
US$ 141.00
+Info
103911
DENTALLOYS - Super-100 Chrome Cobalt Molibdeno Ingot 10oz - Be & Ni Free for Ceramic rerstora...
103837
103836
SUPER-6 CR-CO Shots
Chrome Cobalt for partials
Other Metal: Co(64% ),Cr(28%),Mo(6%),Other(2%)
Price
+
103912
Code
DENTALLOYS - Super-6 Chrome Cobalt Shots (Semi Hard ) 10oz - ...
Name
US$ 29.00
+Info
103841
DENTALLOYS - Super-6 Chrome Cobalt Shots (Semi Hard ) 1 Kg - ...
US$ 74.00
+Info
102313
DENTALLOYS - Super-6 Chrome Cobalt Shots (Semi Hard ) 1 Lb - ...
US$ 45.00
+Info
SUPER-6 Ingots
Chrome Cobalt for partials
Other Metal: Co(64% ),Cr(28%),Mo(6%),Other(2%)
Price
+
103913
Code
DENTALLOYS - Super-6 Chrome Cobalt Shots (Semi Hard ) 10oz - ...
Name
US$ 36.00
+Info
103843
DENTALLOYS - Super-6 Chrome Cobalt Shots (Semi Hard ) 1 Lb - ...
US$ 55.00
+Info
103842
DENTALLOYS - Super-6 Chrome Cobalt Ingots (Semi Hard ) 1 Kg - ...
US$ 91.00
+Info
CHROME COBALT CR-CO ( Ecco )
Common Use: For partial dentures restoration. Available in INGOTS and SHOTS
Formula:
- Nickel 1%
- Cobalt 62%
- Chrome 27%
- Molybd 6%
- Tungsten 4%
-Elong 8%
Price
+
103914
Code
E - E-CHROME S-2 Chrome Cobalt Alloy Shots (Semi Hard ) 10oz - Cromo Cobalto En Lagr...
Name
US$ 23.00
+Info
102196
E - E-CHROME S-2 Chrome Cobalt Alloy Shots (Semi Hard ) 1LB - Cromo Cobalto En Lagri...
US$ 35.00
+Info
101188
E - E-CHROME S-2 Chrome Cobalt Alloy Shots (Semi Hard ) 1kg - Cromo Cobalto En Lagri...
US$ 59.00
+Info
103915
E - E-CHROME L-2 Chrome Cobalt Alloy Ingots (Semi Hard ) 10oz - Cromo Cobalto En ...
US$ 37.00
+Info
102194
E - E-CHROME L-2 Chrome Cobalt Alloy Ingots (Semi Hard ) 1LB - Cromo Cobalto En L...
US$ 55.00
+Info
100924
E - E-CHROME L-2 Chrome Cobalt Alloy Ingots (Semi Hard ) 1KG - - Formula: Nickel...
US$ 92.00
+Info
Price
+
CHROME COBALT CR-CO ( Exacto )
Common Use: For partials denture restoration
Formula:
- Cobalt 65.5%
- Chrome 28.5%
- Molybd 6.0%
Code
10
Name
21/05/2010 / 1284
Alloys
Chrome Cobalt
103916
E - E-CHROME S Chrome Cobalt Shots (Semi Hard ) 10oz - Cromo Cobalto En Lagrima - Fo...
US$ 27.00
+Info
102195
E - E-CHROME S Chrome Cobalt Shots (Semi Hard ) 1LB- Cromo Cobalto En Lagrima - Form...
US$ 41.00
+Info
406-002
E - E-CHROME S-1 Chrome Cobalt Shots (Semi Hard ) 1KG- Cromo Cobalto En Lagrima - Fo...
US$ 68.00
+Info
103917
E - E-CHROME L Chrome Cobalt Ingots (Semi Hard ) 10oz - Cromo Cobalto Lingote For...
US$ 39.00
+Info
102193
E - E-CHROME L Chrome Cobalt Ingots (Semi Hard ) 1LB - Cromo Cobalto Lingote Formu...
US$ 59.00
+Info
406-003
E - E-CHROME L-1 Chrome Cobalt Ingots (Semi Hard ) 1KG - Cromo Cobalto Lingote For...
US$ 98.00
+Info
Alloys
Gold color Alloys
NPG Gold Color ( Ecco )
ALMOST THE SAME FORMULA AS NPG FROM AALBADENT Company
Cu : 80.9 %
Al : 7.8 %
Ni : 4.3 %
Fe : 3%
Zn : 2.7%
Mg : 1.7%
Vickers Hardness : 140 Casting Temp : 1148 C (2100F )
Premiun non Precious TYPE 3 casting alloy for Crowns and bridges , inlays and onlays.
Price
+
101892
Code
ECCO - ECCO- Npg formula 1lb - square ingot - no stamp - same same formula as NPG - ...
Name
US$ 110.00
+Info
101292
ECCO - ECCO- Npg formula 1Kg - square ingot - no stamp - same same formula as NPG - ...
US$ 190.00
+Info
103905
ECCO - ECCO- Npg formula 10oz - square ingot - no stamp - same same formula as NPG - ...
US$ 55.00
+Info
Alloys
Ni Chrome Non Berilium
Cr Co NON Be ( Cerakast )
Specification :
Ni(54)
Cr(22)
Mo(9)
Fe(4)
Nb(4)
Ta(4)
Melting Range:2230-2245 F - 1220-1230 C
Casting Temperature: 2500 F - 1370 C
Coefficient of Linear Thermal Expansion: CTE: 25-500 To 25-600 14.1 To 14.4
Price
+
102200
Code
CERAKAST - CeraKast-2 Ni Cr Non Berilium 1 LB
Nickel Chrome Berilium Free CTE (coeficie...
US$ 76.00
+Info
102188
CERAKAST - CeraKast-2 Ni Cr Non Berilium 1 Kg Nickel Chrome Berilium Free CTE (coeficien...
US$ 127.00
+Info
103918
CERAKAST - CeraKast-2 Ni Cr Non Berilium 10oz Nickel Chrome Berilium Free CTE (coeficien...
US$ 51.00
+Info
21/05/2010 / 1284
Name
11
Alloys
Nickel Chrome Ni-Cr Be Free ( Bego )
- Non-precious alloy for metal-ceramic work or composite veneering
- Beryllium-free
- Low thermal conductivity.
- High modulus of elasticity.
- Great strength with any practical span length.
- The low hardness of 180 VH10 ensures easy preparation.
- Long-term cooling not required: low coefficient of expansion.
CTE 13,8 14,5
- Reliable metal-ceramic bond.
Price
+
50225-1
Code
BEGO - Wiron 99 - Ni-Cr n/Be 1 lb
Name
US$ 372.00
+Info
010-50225
BEGO - Wiron 99 - Ni-Cr n/Be 1 kg
US$ 621.00
+Info
Nickel Chrome Ni-Cr Be Free ( Dentalloys )
Formulated Berilium Free. Common Use: For metal-ceramic restorations
Its advanced metallurgical properties, including a light oxide, ensure consistent, faithful wax reproduction
with sharp margins.
Composition Weight % Metal: Ni(54)Cr(22)Mo(9 Fe (4) Ta ( 4 )
Expansion at 500C: 14.1
Crucible: Quartz or Zircon
Price
+
102198
Code
DENTALLOY - SUPER-3 Ni Cr Non Berilium ( Free) 1LB - Nickel Chrome Berilium Free CTE (coef...
Name
US$ 59.00
+Info
100010
DENTALLOY - SUPER-3 Ni Cr Non Berilium ( Free) 1Kg - Nickel Chrome Berilium Free CTE (coef...
US$ 99.00
+Info
103919
DENTALLOY - SUPER-3 Ni Cr Non Berilium ( Free) 10oz - Nickel Chrome Berilium Free CTE (coe...
US$ 39.00
+Info
Nickel Chrome Ni-Cr Be Free ( Exacto )
Formulated Berilium Free. Common Use: For metal-ceramic restorations Its advanced metallurgical
properties, including a light oxide, ensure consistent, faithful wax reproduction with sharp margins.
Composition Weight % Metal: Ni(54)Cr(22)Mo(9 Fe (4) Ta ( 4 )
Crucible: Quartz or Zircon
Code
Name
Price
+
US$ 49.00
+Info
EXACTO - E-BOND 2 Ni Cr Non Berilio 1LB Nickel Chrome Berilium Free ...
US$ 74.00
+Info
EXACTO - E-BOND 2 Ni Cr Non Berilio 1kg
US$ 123.00
+Info
103920
EXACTO - E-BOND 2 Ni Cr Non Berilio 10oz
102197
101416
Nickel Chrome Berilium Free ...
Nickel Chrome Berilium Free ...
Alloys
Nickel Chrome Berilium
12
21/05/2010 / 1284
Alloys
Nickel Chrome Ni-Cr Be ( Cerakast )
Alloy Name CERAKAST 1 NON-PRECIOUS ALLOYS
Color: WHITE Type: PFM Application
CERAKAST 1 been specially designed for Ceratec porcelain powders. Due to its CTE and containing
Berilium, makes it also full compatible with the most used porcelains in the market
Common Use: For metal-ceramic restoration
Is compatible with almost all porcelains in the market - Ceramco- Ceramco 2- Noritake- Ceratec - Vision
Formula CERAKAST 1 :
in % of the weight : Ni(78.9)Cr(12),Mo(4.6),Al(2.6),Be(1.8)
Code
Name
Price
+
US$ 54.00
+Info
CERAKAST - CeraKast Ni Cr with Berilium 1 lb Nickel Chrome Berilium for ceramics/porcelain...
US$ 81.00
+Info
CERAKAST - CeraKast Ni Cr with Berilium 1 Kg
US$ 135.00
+Info
103906
CERAKAST - CeraKast Ni Cr with Berilium 10oz Nickel Chrome Berilium for ceramics/porcelai...
102199
101580
Nickel Chrome Berilium for ceramics/porce...
Nickel Chrome Ni-Cr Be ( Dentalloys )
ALLOY SUPER-1 & Super-14 For Ceramic
Super 1 is the most recognized non-precious alloy in the world, and continues to be the top-seller at Dental
Alloy Products.
Super 1, wit a CTE of 14,1 to 14,5 , is compatible with almost all porcelains in the market - CeramcoCeramco 2- Noritake- Ceratec - Vision
Super 14 with a CTE 13,6 to 14,0 , is compatible with VITA porcelains
Formula :
SUPER 1 : in % of the weight : Ni(77)Cr(14)Mo(4.7)Al(2)Be(1.8)
SUPER-14 : in % of the weight : Ni(72)Cr(15),Mo(9),Al(2),Be(1.8)
Price
+
103907
Code
DENTALLOYS - SUPER-1 Ni Cr Be Ingot 10oz
Name
US$ 39.00
+Info
100504
DENTALLOYS - SUPER-1 Ni Cr Be Ingot 1kg
US$ 107.00
+Info
102202
DENTALLOYS - SUPER-1 Ni Cr Be Ingot 1lb
US$ 64.00
+Info
103908
DENTALLOY - SUPER-14 -Ni Cr Be Ingot 10oz
US$ 42.00
+Info
100617
DENTALLOY - SUPER-14 -Ni Cr Be Ingot 1kg
US$ 145.00
+Info
102203
DENTALLOY - SUPER-14 -Ni Cr Be Ingot 1lb
US$ 63.00
+Info
Nickel Chrome Ni-Cr Be ( Ecco )
ECCO-BOND
Same formaula as Super-1
Wit a CTE of 14,1 to 14,5 , is compatible with almost all porcelains in the market - Ceramco- Ceramco 2Noritake- Ceratec - Vision
Formula : ECCO-BOND:
in % of the weight : Ni(77)Cr(14)Mo(4.7)Al(2)Be(1.8)
Code
Name
Price
+
US$ 44.00
+Info
ECCO - ECCO-Bond Ni Cr with Berilio 1 lb - Ingots - Nickel Chrome Berilium for ceram...
US$ 66.00
+Info
ECCO - ECCO-Bond Ni Cr with Berilio 1Kg - Ingots - Nickel Chrome Berilium for ceram...
US$ 110.00
+Info
103910
ECCO - ECCO-Bond Ni Cr with Berilio 10oz - Ingots -
102201
101142
21/05/2010 / 1284
Nickel Chrome Berilium for cera...
13
Alloys
Nickel Chrome Ni-Cr Be ( Exacto )
Alloy Name EXACTO-BOND ALLOY NON-PRECIOUS ALLOYS
Color: WHITE Type: PFM Application
EXACTO-BOND ALLOY designed for orcelain powders. Due to its CTE and containing Berilium, makes it
also full compatible with the most used porcelains in the market Common Use: For metal-ceramic
restorationIs compatible with almost all porcelains in the market - Ceramco- Ceramco 2- Noritake- Ceratec Vision
EXACTO-BOND ALLOY
EXACTO-BOND : in % of the weight : : Ni(78.9)Cr(12),Mo(4.6),Al(2.6),Be(1.8)
Code
Name
103909
EXACTO - ExactoBond Ni Cr with Berilium 10oz
102209
EXACTO - ExactoBond Ni Cr with Berilium 1 lb
1010001
EXACTO - ExactoBond Ni Cr with Berilium 1Kg
Nickel Chrome Berilium for ceramics/porc...
Price
+
US$ 49.00
+Info
US$ 74.00
+Info
US$ 123.00
+Info
Nickel Chrome Ni-Cr Be ( Rexilium )
Price
+
100034
Code
REXILIUM - Rexilium III 3 Chrome niquel 5oz
Nickel Chrome Berilium for ceramics/porcela...
Name
US$ 60.00
+Info
101937
REXILIUM - Rexilium III 3 Chrome niquel 1Kg
Nickel Chrome Berilium for ceramics/porcela...
US$ 280.00
+Info
Alloys
Solder alloys
SOLDER SILVER ( Ecco )
ECCO Solder Paste With Flux *silver* 15gr
- Supplied in handy dispenser
- Easy to clean
- Adheres to metal
- Bright*Clean results
- Leaves litle or no carbon
Available in Easy - Hard and Medium hardness
Price
+
103802
Code
ECCO - ECCO-Solder Paste w/Flux - Easy - Silver -15gr Supplied in handy dispenser - Eas...
Name
US$ 24.00
+Info
103804
ECCO - ECCO-Solder Paste w/Flux - Hard - Silver -15gr Supplied in handy dispenser - Eas...
US$ 34.00
+Info
103803
ECCO - ECCO-Solder Paste w/Flux - Medium - Silver -15gr Supplied in handy dispenser - E...
US$ 30.00
+Info
SOLDERS CHROME COBALT CR-CO ( All Brand )
Code
Price
+
US$ 38.00
+Info
E - E-CHROME-2 solder 1oz ( 30grs ) 1 bag - Specially designed for S-1 L-1 S-2 an...
US$ 32.00
+Info
BEGO - Cromo. Wiroweld Nc Solder #50005 Soldadura [ solders ]
US$ 132.95
+Info
DENTALLOYS - SUPER-6 solder 1 oz Red Tap - for chrome cobalt - [ solders ]
100965
010-50006
14
Name
100943
21/05/2010 / 1284
Alloys
Solder alloys
SOLDERS LASER ( EDG )
Price
+
100621
Code
EDG - Titanium Rod 1.2mm x 160mm - for super structures - ...
Name
US$ 26.50
+Info
100620
EDG - Titanium Rod 3.2mm x 160mm - for super structures - ...
US$ 29.00
+Info
100631
EDG - Plasma/Laser welding wires Ni cr 0.70mm diam x 1mt - for welding adding Materia...
US$ 13.00
+Info
100643
EDG - Plasma/Laser welding wires Cr Co 0.70mm diam x 1mt - for welding adding Materia...
US$ 13.00
+Info
SOLDERS NON PRECIOUS ( All Brands )
Code
Price
+
DENTALLOYS - SUPER-1 solder 1oz ( 30grs ) Red Tap - for chrome niquel and porcelain alloy...
US$ 31.90
+Info
010-52625
BEGO - Wirolot - 5grs - Soldering Rods For Wiron 99 Non-Precious Soldering Alloy Cromo ...
US$ 52.00
+Info
102340
ECCO - ECCO Solder Nickel Chrome 1oz ( 30grs ) - for chrome niquel and porcelain allo...
US$ 26.00
+Info
100736
Name
Aluminum Oxide
ALUMINUM OXIDE WHITE ( All Brands )
- Sandblasting
- Grinding
- Anti Skid Flooring (Coarse grits like a 24)
- Surface Preparation
- Etching, Carving & Gouging:(Coarse grits like a 36)
- White in colour
Avaliable in 1 lb5 lb 25lb 50lb and 100lb
100 MICRON
Price
+
101408
Code
ECCO - White Alum Oxide 100mic 1lb
Name
US$ 7.22
+Info
100837
US$ 154.80
+Info
100838
US$ 264.00
+Info
25 MICRON
Code
101402
Name
Price
+
US$ 9.30
+Info
250 MICRON
Code
101409
Name
Price
+
US$ 7.22
+Info
Price
+
50 MICRON
Code
21/05/2010 / 1284
Name
15
Aluminum Oxide
101406
US$ 7.22
+Info
100835
US$ 154.80
+Info
100836
US$ 264.00
+Info
103385
HANDLER - Replacement Sand Med Grit 5lb
US$ 17.95
+Info
BUFFALO - Pony Sandblaster Media 5lb
US$ 16.80
+Info
009-75810
Articulators and Occlusors
WHIP MIX-045-2267 Whip Mix #2240 2000S w/Facebow
US$ 520.00
Whip Mix #2240 Articulator 2000 Series 2000 with Facebow Model 2240 Advantages of Interchangeability
- Users can transfer mounted casts without loss of accuracy
- Mounted casts need no longer be sent on an articulator when shipped to or from a laboratory using the
same articulator model
- Reduces the number of instruments required in both the dental office and dental laboratory Instrument
damage caused by shipping the articulator to and from the dental lab is eliminated No expensive equipment
or time-consuming calibration is necessary with the "Accumount" system.
- Condylar guidance featuring:- Adjustable condylar inclination with curved eminentia
- Immediate side shift
- Fixed intercondylar distance of 110 mm
- The 2240 is so accurate and easy to use that it was "rated excellent or good by 100% of evaluators" by an
independent research institute.
Accessories for articulators
KEYSTONE-034-1050077 Curved Disk Only
US$ 5.00
Curved Disk each ( Only the disc ) [ K# 1050077 ] [ For Articul Keystone Magnetic - # 1050075 & # 1050074 - ]
KEYSTONE-034-1050076 Magnets For articulador 4pk
US$ 12.60
Magnets for articulator Keystone Magnetics - 4pk - Only the magnets [ For Articul Keystone Magnetic - # 1050075 & # 1050074 - ]
Discos Magneticos
Apex (Denture) Articulators
HANDLER - 103482 #72 Atlas-Apex Type Articulato
US$ 22.05
- Atlas articulators have been used by leading dental technicians and dentists for many years.
- The 72 is constructed of bronze castings with a center support for durability and better plaster retention.
- Machined to produce maximum accuracy for this type articulator, the 72 Apex type articulator provides durable
service.
- Shipping Wgt.: 1 lb [0.5 Kg]Unit Dimensions: 3 1/2 wide x 5 deep x 2 1/2 high[8.9cm x 12.7cm x 3.8cm]
16
21/05/2010 / 1284
ECCO -100830 Low Arch (Apex) Denture Brass
US$ 6.40
- ECCO Articulator have been used by leading dental technicians and dentists for many years.
- Constructed of bronze castings with a center support for durability and better plaster retention.
- Machined to produce maximum accuracy for this type articulator, the Apex type articulator provides durable
service.
ECCO -100829 Low Arch (Apex) Denture Chrome
US$ 4.42
- ECCO Articulator have been used by leading dental technicians and dentists for many years.
- Constructed of bronze castings with a center support for durability and better plaster retention.
- Machined to produce maximum accuracy for this type articulator, the Apex type articulator provides durable
service.
Crown and Bridge Articulators
ECCO -100831 Art Crown&Bridge Brass ea
US$ 5.62
- ECCO Articulator Crown and Bridge
- Each Brass
- Articulador corona - puente - bronze
ECCO -100832 Art Crown&Bridge Chrome ea
US$ 3.75
- ECCO Articulator Crown and Bridge
- Each -Chrome
- Articulador corona - puente- bronzecromado
Disposable articulators
ECCO - 100731 Disposable Art Black 100pk
US$ 12.00
- Black
- Excellent quality - 100pk
- They dont break -Satisfaction warranted -
High Arch articulators
21/05/2010 / 1284
17
ECCO - 100828 High Arch Denture Brass
US$ 6.40
- ECCO Articulator High Arch Denture Each
- Brass
- Articulador arco alto bronze
ECCO - 100827 High Arch Denture Chrome
US$ 4.42
ECCO Articulator High Arch Denture Each -Chrome- ( Articulador arco alto bronze cromado )
Magnetic Articulators
KEYSTONE-034-1050075 Deluxe Magn Artic No Pin
US$ 44.03
- Light in weight and Teflon coated - K# 1050075
- Same advantages as the Deluxe only with magnetic split casting
- To ensure easy removal and exact setting of models
- excellent for checking cases
- Totally interchangeable
ECCO- 102433 Deluxe Magn Artic No Pin Sm
US$ 24.00
- Small - Epoxy painted
- Can replace tem K# 1050075
- smaller size
- Same advantages as the Deluxe Articulator only with magnetic split casting to ensure easy removal and exact
setting of models
- Excellent for checking cases
- Totally interchangeable
- Light in weight and high resistance paint
KEYSTONE-034-1050074 Deluxe Magn Artic With Pin
US$ 44.52
- [K# 1050074 ]
- An excellent articulator to be used while working on dentures.
- Same advantages as theDeluxe with magnetic- only it has incisal pins for use with denture production.
18
21/05/2010 / 1284
ECCO - 102436 ECCO Art 3 Dimensional
Magn
US$ 54.00
- Light weight
- Smooth inclined Lateral movements
- Anterior pin
- Inclined incisal guide
- Fixed occlusor option ( movements can be supressed and used as a fixed
oclussor )
- 1 set of plastic mounting plates
- 3 sets of rehusable metal plates for magnetic mounting
- 1 set of 2 magnets
- 1 Mounting platform for model setting
KEYSTONE-034-1050085 Luxury Art 3
Dimensional
US$ 72.00
- [K# 1050085 ]
- Every advantage of the finest quality articulator at a low price Articulador
Magnetico
- Full - Complete unit
Includes
- Four piece mounting disc set
- Plastic mounting magnet plates pk/2
- Curved plate
- Flate plate
- Long incisal pin
- Central pin
- White plate
KEYSTONE - 1050100 Precision Articulator
US$ 172.00
- Indexed magnetic mounting plates
- 10 -20 - 30 degrees tabless available
- Smooth lateral and protrusive movements
- Includes : 6 additional magnets
Non Adjustable articulators
21/05/2010 / 1284
19
ECCO - 100455 Deluxe Articulator With pin
US$ 23.00
- Articulator W/Pin Light in weight and Teflon coated
- Articulador - an excellent articulator to be used
KEYSTONE-034-1050095 Deluxe Articulator With Pin
US$ 22.50
- Here is an exellent deluxe articulator for sending important cases between lab and doctor.
- It is lightweight Teflon coated, made with accurate interchargeable mounts.
- High quality articulator at a low, economical price. Has a full range of moviments
- including lateral excursions.
Plastic Articulators
ECCO- 100457 Art Plastic Light Blue w/screw
US$ 1.00
- With screw ( made of ABS)
- Articulador plastico con tornillso
ECCO - 100282 High Arch Plastic - Violet
US$ 1.00
- With screw ( made of ABS)
- Articulador plastico paracompletas con tornillso
Semi-Adjustable articulators
ECCO - 103406 Semi Adjustable Articulator
US$ 85.00
Semi Adjustable Articulator - includes 2 magnetic moutning plates and 10 metal mountng plates - has an occlusal plane - a
midline indicatator and a vertical rest - weight : 4lb - Shipping dimensions: 8x6x6in -- Semi adjustable articulator
- Includes 2 magnetic mounting plates
- 10 metal mounting plates
- Has occlusal plane
- A midline indicator and veritcal rest
- Weight: 4lb
- Shipping dimensions: 8x6x6in
20
21/05/2010 / 1284
VISION - 103466 Vision Enzo Articulator
US$ 179.00
The Enzo Universal Plasterless Articulator
The Enzo Articulator is proving to successfully integrate with many of the
leading digital model systems when a more accurate articulator is called for.
The articulator continues to be a very popular choice with the use of standard
models as it eliminates plaster and the resetting of articulations is achieved in
seconds. It replicates true lateral and protrusive excursions. Lightweight and
perfectly balanced, it fits comfortably in the technician's hand.
*One Articulator for full arch or quadrant
*Precision interlocking components provide very accurate articulations in
seconds
*Both upper and lower plates swivel 360 degrees on ball joints allowing for all
types of movement handling even the most difficult bites
*True lateral and protrusive excursion
*Lightweight and perfectly balanced, it fits comfortably in the hand
*Immediate bite changes made by the dentist
*Disposable Universal Bases
* Bases are easily glued to any model with a flat surface and both quadrant and
full arch models are accommodated with this universal design
Stone Free articulator
ECCO - 103075 ECCO-Articulator N2
US$ 21.00
New Mount Pre-cast Dental Model Articulator N2
* Serrated C-clamps locks models securely and quickly.
* Easily adjustable
* Rubber liners on the base plate for added security and stability.
* Can easily separate arches with the quick release hinge.
* Includes Allen key.
ECCO- 102434 Galletti Type Art Stone Free
US$ 190.00
ECCO- Galletti type Articulator - Silver - Aluminum made and Sateinless steel working parts - Stone Free
articulator -
ECCO - 102435 Galletti Type Art Stone Free
US$ 190.00
ECCO- Galletti type Articulator - White - Aluminum made and Sateinless steel working parts - Stone Free
articulator - Weight: 1lb - Shipping Dimensions: 8x8x8in
Boxes & Packaging
Cristal clear boxes
21/05/2010 / 1284
21
Boxes & Packaging
Cristal clear boxes
ECCO -100224 C&B Box 2x2 Cristal Clear 12pk
US$ 13.20
ECCO Crown box x 2 x 2in Cristal clear - jewlery style - with membrane to hold labor - 12pk
Boxes & Packaging
DENTURE
Denture Storage Boxes
- Made of high-density polypropylene
- These boxes make an execellent container for patients with dentures.
- This box is 1-3/4" deep, strong, protective and lightweight.
Price
+
106818
Code
KEYSTONE - Denture Storage Box Light Blue
Name
US$ 1.00
+Info
106819
KEYSTONE - Denture Storage Box Yellow
US$ 1.00
+Info
Boxes & Packaging
Flexible boxes
C&B FLEXIBLE BOXES ( Keystone )
- Made from flexible polypropyelne material that will not break
- They are ideal for dental laboratories to send crown and bridge work to their dentists
- They have a lock in mechanism
- Will resist crushing and look great
- You can choose from a variety of colors:
- Dark blue, white, cherry red, gray, black, clear
- One foam filler recommended per box
- Foam colors: Blue, charcoal, yellow
- Available in 500pk or 1000pk
- Size for 1in box: 1x1x3/4in [5/8in bottom 1/8in top]
- Size for 2in box: 2-1/8x1-5/8x3/4in [5/8in bottom 1/8in top]
- Does not include foam filler
Price
+
101144
Code
KEYSTONE - Flex C&B Bx 2in Plain 500pk
Name
US$ 76.99
+Info
101143
KEYSTONE - Flex C&B Bx 1in Plain 1000pk
US$ 74.38
+Info
C&B FLEXIBLE BOXES PRINTED ( Keystone )
- Made from flexible polypropyelne material that will not break
- They are ideal for dental laboratories to send crown and bridge work to their dentists
- They have a lock in mechanism
- Will resist crushing and look great
- You can choose from a variety of colors:
- Dark blue, white, cherry red, gray, black, clear
- One foam filler recommended per box
- Foam colors: blue, charcoal, yellow
22
21/05/2010 / 1284
Boxes & Packaging
Flexible boxes
- Does not include foam
- First time Stamp charge for the design - per color ( 45us$ )
- 3 weeks delivery
- Imprint size: 3/4x3/4in for 1in box
- Imprint size: 2-3/4x2-3/4in for 2in box
- Maximum Number of lines for 1in box printing - 4 lines
Price
+
101013
Code
KEYSTONE - Flex C&B Bx 2in Printed 500pk
Name
US$ 91.35
+Info
100867
KEYSTONE - Flex C&B Bx 1in Printed 1000pk
US$ 132.84
+Info
Boxes & Packaging
Ortho Boxes
ORTHO - RETAINER BOXES ( Keystone )
- An attractive container for storing mouthguards, retainers,bleaching trays and splints
- Made of flexible plastic
- Hinge design with securing latch
- Ideal for patients with removable appliances
- box is 3/4in depth
- 12pk
Price
+
9575190
Code
KEYSTONE - Ortho Box Assorted 3/4in 12pk
Name
US$ 8.00
+Info
101463
KEYSTONE - Ortho Box Beige 3/4in 12pk
US$ 8.00
+Info
101460
KEYSTONE - Ortho Box Dark Blue 3/4in 12pk
US$ 8.00
+Info
101462
KEYSTONE - Ortho Box Green 3/4in 12k
US$ 8.00
+Info
9575105
KEYSTONE - Ortho Box Red 3/4in 12pk
US$ 8.00
+Info
101461
KEYSTONE - Ortho Box White 3/4in 12pk
US$ 8.00
+Info
9575165
KEYSTONE - Ortho Box Yellow 3/4in 12pk
US$ 8.00
+Info
101437
KEYSTONE - OrthoBox Light Blue 3/4in 12pk
US$ 8.00
+Info
101464
KEYSTONE - OrthoBoxMarble Pink 3/4in 12pk
US$ 8.00
+Info
Boxes & Packaging
Rigid Boxes
C&B RIGID BOXES ( Ecco )
- Blue and clear C&B Box
- Higned snap type lid
- Includes foam filler
- Saves shipping cost
Price
+
100690
Code
ECCO - C&B Box 1inch Blue/Clear 100pk
US$ 18.00
+Info
100689
ECCO - C&B Box 2inch Blue/Clear 100pk
US$ 26.00
+Info
21/05/2010 / 1284
Name
23
Boxes & Packaging
Rigid Boxes
C&B RIGID BOXES ( Keystone )
*Attractive tooth boxes available in a wide variety of colors
*With clear lids: maroon, green, black, blue, red, white, yellow, pink, gray
*Solid colors: clear, white, blue, black
*When use with two fillers per box these rigid boxes provide maximum protection for valuable contents
*Available in 500pk or 1000pk
*Hinged snap-type lide
*Size for 1in box: 1x1x3/4in [1/2in bottom 1/4in top]
Size for 2in box: 2-1/8x1-5/8x3/4in [1/2in bottom 1/4in top]
*Does not include foam filler
Price
+
101145
Code
KEYSTONE - C&B Box 1in Plain 1000pk
Name
US$ 90.32
+Info
101146
KEYSTONE - C&B Box 2in Plain 500pk
US$ 88.45
+Info
C&B RIGID BOXES PRINTED ( Keystone )
- Attractive tooth boxes available in a wide variety of colors
With clear lids: maroon, green, black, blue, red, white, gray
*Solid colors: clear, white, blue, black
- When use with two fillers per box these rigid boxes provide maximum protection for valuable contents
- Hinged snap-type lide
- Does not include the Foam filler
- First time Stamp charge for the design ( 45us$ )
- Maximum 3 lines
- 3 weeks delivery
- Imprint sixe 3/4x3/4in for 1in box
- Imprint size: 2-3/4x2-3/4in for 2in box
- Does not include foam filler
Price
+
101016
Code
KEYSTONE - Rigid Crown & Bridge Boxes 1inch Imprinted with your logo & phone number - 1000...
Name
US$ 165.75
+Info
34-9570085
KEYSTONE - Rigid Crown & Bridge Boxes 2inch Imprinted with your logo & phone number - 500...
US$ 105.35
+Info
Boxes & Packaging
Shipping Boxes
SHIPPING & PACKING ( All Brands )
All Packaging and Shipping options to secure labor work arrive to destination safely.
SHIPPING BAGS
- The original Delivery Bags for fast and safe transport to and from the lab
- Poly-lined to withstand humidity and wetness
- Extra thick 60lb white paper for a clean and professional look
- Large gusset for a roomier articulator fit
- Equipped with a tin tie closure for a secure seal
- Available in 2 sizes: white
- Regular- (5.5" x 3.5" x 11")
24
21/05/2010 / 1284
Boxes & Packaging
Shipping Boxes
- XLarge- (6" x 4" x 13")
- Case of 100 or 500 bags
-Available in 1 size: clear
- 4x8in
- 100pk
Code
Name
Price
+
US$ 25.20
+Info
SELECT - Delivery Bags - Extra Large - 6 x 4 x 13inches - 100pk - bags ...
US$ 37.80
+Info
SELECT - Delivery Bags - Regular - 5 1/2 x 3 1/2 x 11inches - 500pk bags ...
US$ 116.20
+Info
101509
SELECT - Delivery Bags - Extra Large - 6 x 4 x 13inches - 500pk - bags ...
US$ 155.40
+Info
105021
ECCO - ECCO-Delivery Bags 4x8in - Clear 100pk transparent - transportation bags
US$ 8.00
+Info
101487
SELECT - Delivery Bags - Regular - 5 1/2 x 3 1/2 x 11inches - 100pk -bags ...
101488
101508
SHIPPING BOXES
Model Storage
- Ideal Box for Storing Patient's Models Long Term.
- Boxes Are Made From Double Strength Corrugated Cardboard To Provide Maximum Protection.
- They are Shipped Flat To Optimize Storage Space.
- Each Box Holds 4 Patient Models
- Comes Printed with 4 Identification Labels
- Avaiable in 100pk
- Storqage Measure 7 x 7 x2in
Shipping containers
- Clear heavy duty plastic
- Excellent way to protect valuable models and dentures
- 100pk
Price
+
101439
Code
KEYSTONE - Model Storage cartoon Box - 7 x 7 x 2 inch - 100pk - ...
Name
US$ 81.00
+Info
101436
KEYSTONE - Shipping Containers - Small - 4 x 3-3/4 x 1-3/4 inches - ...
US$ 103.00
+Info
101435
KEYSTONE - Shipping Containers - Medium - 4 x 4 x 2-3/8 inches - ...
US$ 103.00
+Info
Brushes
Bristle brushes
BRISTLE BRUSHES ( Ecco )
- 3/4in
- Soft: Gray
- Std Stiff: white
- X-stiff: black
- 12pk
Price
+
101894
Code
ECCO - Soft Bristle Brush 17mm diam
Name
US$ 3.10
+Info
101897
ECCO - Soft Bristle Brush 19mm diam
US$ 3.10
+Info
101898
ECCO - St Stiff Bristle Brush 19mm di
US$ 3.10
+Info
101895
ECCO - St Stiff Bristle Brush 17mm di
US$ 3.10
+Info
101899
ECCO - X-Stiff Bristle Brush 19mm dia
US$ 3.10
+Info
101896
ECCO - X-Stiff Bristle Brush 17mm dia
US$ 3.10
+Info
Brushes
Ceramist Brushes
21/05/2010 / 1284
25
Brushes
Ceramist Brushes
CERAMIST BRUSHES ( Keystone )
- All natural high quality kolinsky sable brushes
- Elasticity of hair, recovers its original shape after stroke
- Ability to control a porcelain flow, holds and dispenses material predictably
Price
+
100787
Code
KEYSTONE - Natural Kolinsky Ceramist Brush Round #0 - High Quality Natural Kolinsky sable ...
Name
US$ 6.48
+Info
100788
US$ 6.48
+Info
100789
US$ 6.96
+Info
100790
US$ 7.93
+Info
100791
US$ 11.50
+Info
100792
US$ 13.12
+Info
100793
KEYSTONE - Natural Kolinsky Ceramist Big Brush ( Clear Handle ) - #9 Size - Has a small bea...
US$ 38.55
+Info
Brushes
Kolinsky Brushes
KOLINSKY BRUSHES ( Ecco )
- Brushes made of the legendary natural Kolinskys.
- The best Kolinsky brushes are made with hair from the tail of the male animal's winter coat. Although Kolinskies are
also found in northern China and northern Japan.
- This material is concered the best for dental use. Your work will automatically look better!
Price
+
100786
Code
ECCO - Kolinsky Round #8 Red
Name
US$ 6.50
+Info
100526
US$ 5.50
+Info
100525
US$ 5.50
+Info
100524
US$ 5.50
+Info
100523
ECCO - Kolinsky Brush Round #4
US$ 5.50
+Info
100782
US$ 5.50
+Info
100783
US$ 5.50
+Info
100784
US$ 5.50
+Info
100785
US$ 5.50
+Info
100510
ECCO - Kolinsky Brushes Set of 8
US$ 46.00
+Info
KOLINSKY BRUSHES ( Keystone )
- Brushes made of the legendary natural Kolinskys.
- Has a small bead inside that vibrates and helps to manage the humidity on the brush
- The best Kolinsky brushes are made with hair from the tail of the male animal's winter coat. Although Kolinskies are
also found in northern China and northern Japan. This material is concered the best for dental use.
- Your work will automatically look better!
Code
26
Price
+
034-1170705
KEYSTONE - Kolinsky Brush Round #000
Name
US$ 3.42
+Info
034-1170710
KEYSTONE - Kolinsky Brush Round #00
US$ 3.42
+Info
034-1170715
KEYSTONE - Kolinsky Brush Round # 0
US$ 3.42
+Info
034-1170720
US$ 3.42
+Info
034-1170725
US$ 3.51
+Info
21/05/2010 / 1284
Brushes
Kolinsky Brushes
034-1170730
US$ 3.69
+Info
034-1170735
US$ 4.95
+Info
034-1170740
US$ 4.95
+Info
034-1170745
US$ 6.15
+Info
034-1170750
US$ 6.88
+Info
034-1170755
KEYSTONE - Kolinksy Brush Round # 8
US$ 8.26
+Info
034-1170760
KEYSTONE - Kolinsky Brush Flat #2
US$ 3.40
+Info
034-1170765
KEYSTONE - Kolinsky Brush Flat #4
US$ 3.40
+Info
034-1170700
KEYSTONE - Kolinsky Natural Big Brush #9
US$ 33.30
+Info
Brushes
Lathe Brushes
LATHE BRUSHES ( Ecco )
- Top quality chung king bristle
- Wood hub
- 12pk
Price
+
101901
Code
ECCO - Wood B20 63mmx 2row Conv 12pk
Name
US$ 12.67
+Info
101903
US$ 12.67
+Info
101904
US$ 12.67
+Info
LATHE BRUSHES ( Keystone )
- Top quality chung king bristel
- 12pk
Price
+
034-1170210
Code
KEYSTONE - Plastic B12 63mmx 3row Conv 12
Name
US$ 27.27
+Info
034-1170200
US$ 16.33
+Info
034-1170190
US$ 16.33
+Info
034-1170180
KEYSTONE - Plastic B12 47mmx 2r Conv 12pk
US$ 17.33
+Info
ECCO - 100778 Plastic B27 76mmx 4row Conv 12
US$ 2.00
ECCO Lathe brushes 12pk
- 3in diam - 76mm - 4 Rows
- Converging bristle - Plastic hub - Top quality bristtle
- price x 12 ( the price you see is each brush )
- B27
Brushes
Sable Brushes
21/05/2010 / 1284
27
Brushes
Sable Brushes
RED SABLE BRUSHES ( Keystone )
- This hair is red in color and is sometimes mixed or passed off
as Kolinsky.
- There are many different grades of Red Sable, depending on
the region of the world from which the animal comes.
Price
+
034-1170260
Code
KEYSTONE - Red Sable Brush Round #000
Name
US$ 2.25
+Info
034-1170270
US$ 2.25
+Info
034-1170280
US$ 2.25
+Info
034-1170290
US$ 2.43
+Info
034-1170300
US$ 2.61
+Info
034-1170310
US$ 2.88
+Info
034-1170320
US$ 3.42
+Info
034-1170330
US$ 3.87
+Info
034-1170340
US$ 4.41
+Info
034-1170350
US$ 4.86
+Info
034-1170355
KEYSTONE - Red Sable Brush Whipper #14
US$ 13.95
+Info
034-1170360
KEYSTONE - Red Sable Brush Rt Angle #000
US$ 2.52
+Info
034-1170370
US$ 2.52
+Info
034-1170390
US$ 2.70
+Info
034-1170410
KEYSTONE - Red Sable Brush Flat #2
US$ 2.52
+Info
034-1170420
US$ 2.61
+Info
034-1170430
US$ 2.79
+Info
Brushes
Scotch Brite Brushes
SCOTCH BRITE BRUSHES ( Keystone )
- Mounted on mandrel
- 5000RPM
- Same application as polishing discs w/ scotch brite
- For polishing flexibles
- 12pk
Code
28
Price
+
054-1670091
KEYSTONE - Scotch Brite 25mm Fine 12pk
Name
US$ 22.00
+Info
054-1670092
KEYSTONE - Scotch Brite 25mm Med 12pk
US$ 22.00
+Info
054-1670016
KEYSTONE - Scotch Brite 25mm Coarse 12pk
US$ 18.00
+Info
054-1670015
KEYSTONE - Scotch Brite 76x13mm Fine 1pk
US$ 12.00
+Info
054-1670011
KEYSTONE - Scotch Brite 76x13mm Med 1pk
US$ 9.00
+Info
054-1670013
US$ 12.00
+Info
054-1670009
US$ 12.00
+Info
054-1670014
US$ 12.00
+Info
054-1670010
US$ 12.00
+Info
054-1670012
KEYSTONE - Scoth Brite 101x25mm Fine 1pk
US$ 12.00
+Info
054-1670008
US$ 12.00
+Info
21/05/2010 / 1284
Brushes
Special Brushes
Brushes
Special Brushes
KEYSTONE - 102211 Yeti Wax Brush
US$ 18.00
Yeti Wax Brush - Used to smooth and even out wax surfaces gently after carving - [K#1860038 ]
Brushes
Synthetic Ceramic Brush
SYNTHETIC BRUSHES ( Keystone )
- This is generally referred to as Taklon.
- Most familiar gold in color but can be dyed in various colors.
- Taklon comes in different grades of quality and diameters just
as it does in fishing lines.
Price
+
034-1171000
Code
KEYSTONE - Synthetic Ceramist Round #000
Name
US$ 2.26
+Info
034-1171010
US$ 2.26
+Info
034-1171020
US$ 2.26
+Info
034-1171030
US$ 2.26
+Info
034-1171040
KEYSTONE - Synthetic Ceramist Round # 2
US$ 2.59
+Info
034-1171050
US$ 2.99
+Info
034-1171060
US$ 3.40
+Info
034-1171070
US$ 3.96
+Info
034-1171080
US$ 4.37
+Info
034-1171090
US$ 4.86
+Info
034-1171200
US$ 5.18
+Info
034-1171220
KEYSTONE - Synthetic Ceramist Flat #2
US$ 2.43
+Info
034-1171230
US$ 2.67
+Info
034-1171240
US$ 3.64
+Info
034-1170770
KEYSTONE - Kolinsky Big Brush Synthetic
US$ 10.62
+Info
Bunsens
Alcohol Lamps
KEYSTONE-034-1820015 Alcohol Torch- Plastic- Keysto
US$ 21.00
Keystone Plastic Alcohol Torch- mini manual blazer for finishing waxing - Flameador
21/05/2010 / 1284
29
Bunsens
Alcohol Lamps
HS-100895 HS Alcohol Lamp Chrome 5oz
US$ 36.79
HS-Alcohol Lamp 5oz - Chrome plated - torches- mechero - bunsen
Bunsens
Electric Bunsens
ECCO -100047 ECCO No-Flame 110volts
US$ 185.00
- Electric Bunsen burner in the form of a compact induction heating
- Replaces the open flame.
- Within seconds, the modeling instrument is heated in the coil opening
at very low power consumption. Protective cover for coil opening.
- Safe operation since it shuts off when overheated and reactivates
automatically after removing the cause.
FEATURES
- Mobile and immediately operational, no gas required.
- Eliminates the risks of getting burned or causing fire.
- Clean, i.e. no soot particles on instrument and/or material.
- No heat emission into the environment.
- Does not consume oxygen Ideal conditions.
- Ideal for setups where FLAME DEVICES are not allowed.
Bunsens
Gas bunsens
HANDLER - 103101 #10 Bunsen Burner 2-9/10x2in
US$ 31.50
#10 Bunsen Burner - 2-9/10x2in [H#10] Made for use with manufactured LPG [Bottled] gas - Attaches to flexible burner tubing with
tapered connector - Shipping Weight : 1lb -
HANDLER - 103102 #10A Bunsen Burner 2-9/16x2in
US$ 31.50
#10A Bunsen Burner - 2-9/10x2in [H#10A] Made for use with natural gas - Attaches to flexible burner tubing with tapered serrated
connector - This usefrul laboratory dental burner is constructed of nickel plated steel - It can be adjusted from sharp to a brush type
flame - Shipping Weight : 1lb -
HANDLER - 103322 #11 Pilot Burner 5x3-1/2in
#11 Pilot Burner - 5x3-1/2in
Shipping Weight : 1lb -
US$ 32.76
[H#11] A studily built bunsen pilot burner with builtin pilot for use with manufactured or bottled [LPN] gas
ECCO - 100696 ECCO Double Bunsen Burner
US$ 37.00
*Double Bunsen Burner
*It has a fire size regulating valve
*Regulation of air entrance that always provides a blue flame
*Does not contaiminate the tools or wax
30
21/05/2010 / 1284
Bunsens
Gas bunsens
HANDLER - 103323 #11A Pilot Burner 5x3-1/2in
US$ 32.76
#11A Pilot Burner w/ built in pilot light - 5x3-1/2in [H#11A] A studily built bunsen burner with built in pilot light Pilot Light flame is controlled with the use of an adjusting screw located at the base of the burner - Main burner
flame is adjusted to On ot OFF positions with a TEE handle located on lower burner value - Manufactured of
nuckel plated steel with tapered serrated connector for use with various size flexible tubing - Shipping Weight :
1lb -
EDG- 100623 EDG Double Bunsen Burner
US$ 50.00
- Propane / Nat Gas
2 flames, small (pilot ) and large
Control of Oxygen mixture regulates intensity of flame and heat
No stains wax or instruments
A proper heavy base guarantees the equipment stability on the worktable.
Two high efficient firings .
Ideal height adjustment and block the shedding melt wax inside the firings
EDG- 101223 EDG Simple Bunsen Burner
US$ 40.00
EDG Simple Bunsen Burner
- Propane / Nat Gas
Regulation of flame size
Control of Oxygen mixture regulates intensity of flame and heat No stains wax or instruments
A proper heavy base guarantees the equipment stability on the worktable.
Ideal height adjustment and block the shedding melt wax inside the firings
Burs Cutter Carbide
1/2 Shank Cutter Burs
1/2 BUR CUTTER - DIAMOND CUT (
Keystone )
- Fast material removal
- Smooth cutting action
- Reduced vibration
- Minimum heat build up
- Long tool life
- Minimal clogging
- Maximum toll control
21/05/2010 / 1284
31
Burs Cutter Carbide
3/8 BUR CUTTER DIAMOND CUT - Coarse ( Keystone )
Long lasting carbide combined with a new technique of alternate diamond cutting on most burs provides benefits never before
possible
Price
+
034-1202181
Code
KEYSTONE - 1/2-A Bur-1/2 Diam Cut.Max
Name
US$ 19.95
+Info
034-1202121
KEYSTONE - 1/2-B Bur-1/2 Diam Cut.Max
US$ 19.95
+Info
034-1202122
KEYSTONE - 1/2-C Bur-1/2 Diam Cut.Max
US$ 19.95
+Info
034-1202123
KEYSTONE - 1/2-D Bur-1/2 Diam Cut.Max
US$ 19.95
+Info
034-1202124
KEYSTONE - 1/2-E Bur-1/2 Diam Cut.Max
US$ 19.95
+Info
3/8 BUR CUTTER DIAMOND CUT - Fine( Keystone )
Long lasting carbide combined with a new technique of alternate diamond cutting on most burs provides benefits never before
possible
Price
+
034-1202154
Code
KEYSTONE - 1/2-D Bur-1/2 Diam Cut.Min
Name
US$ 26.41
+Info
034-1202155
KEYSTONE - 1/2-E Bur-1/2 Diam Cut.Min
US$ 26.41
+Info
1/2 BUR CUTTER SPIRAL CUT - (
Keystone )
- Reduced vibration
- Long tool life
- Minimal clogging
On a single cut bur all the flutes spiral in the same direction,
generally this configuration produces less aggressive cutting
action and leaves a smoother finish
Price
+
034-1201680
Code
KEYSTONE - 1/2-A Bur-1/2 Shnk Spiral Cut
Name
US$ 15.48
+Info
034-1201690
KEYSTONE - 1/2-B Bur-1/2 Shnk Spiral Cut
US$ 15.48
+Info
034-1201700
KEYSTONE - 1/2-C Bur-1/2 Shnk Spiral Cut
US$ 15.48
+Info
034-1201710
KEYSTONE - 1/2-D Bur-1/2 Shnk Spiral Cut
US$ 15.48
+Info
034-1201720
KEYSTONE - 1/2-E Bur-1/2 Shnk Spiral Cut
US$ 15.48
+Info
1/2 GOLD Bur Cutter Spiral Cut- ( Keystone )
- Coated with gold colored Titanium Nitride
- High speed
- Faster cutting
- Longer lasting
Code
32
Price
+
034-1202230
KEYSTONE - Gold 1/2-A Bur-1/2 Shnk Spiral
Name
US$ 25.75
+Info
034-1202235
KEYSTONE - Gold 1/2-B Bur-1/2 Shnk Spiral
US$ 25.75
+Info
1202240
KEYSTONE - Gold 1/2-C Bur-1/2 Shnk Spiral
US$ 28.61
+Info
21/05/2010 / 1284
Burs Cutter Carbide
1202245
KEYSTONE - Gold 1/2-D Bur-1/2 Shnk Spiral
US$ 28.61
+Info
Burs Cutter Carbide
1/4 BUR CUTTER SPIRAL CUT - ( Keystone )
- Reduced vibration
- Long tool life
- Minimal clogging
On a single cut bur all the flutes spiral in the same direction, generally this configuration
produces less aggressive cutting action and leaves a smoother finish
Price
+
034-1201780
Code
KEYSTONE - 88-A-4 Bur-1/4 Shnk Spiral Cut
Name
US$ 10.80
+Info
034-1201790
KEYSTONE - 88-B-4 Bur-1/4 Shnk Spiral Cut
US$ 10.80
+Info
034-1201800
KEYSTONE - 88-C-4 Bur-1/4 Shnk Spiral Cut
US$ 10.80
+Info
034-1201810
KEYSTONE - 88T4 Bur-1/4 Shnk Spiral Cut
US$ 10.80
+Info
Burs Cutter Carbide
3/32 Cross cut
3/32 BUR CUTTER CROSSCUT - (
Ecco )
- Reduced vibration
- Long tool life
- Minimal clogging
On a double cut bur there are additional flutes spiraling in
the opposite direction, generally this configuration produces
a more aggressive cutting action, the finish may however be
rougher than the single cut.
Price
+
300001
Code
ECCO - HP Bur Spiral Cut 51A
US$ 6.00
+Info
300022
ECCO - HP Bur Spiral Cut 52C
US$ 6.00
+Info
300016
ECCO - HP Bur Spiral Cut 52CXC
US$ 6.00
+Info
300021
ECCO - HP Bur Spiral Cut 52D
US$ 6.00
+Info
300015
ECCO - HP Bur Spiral Cut 52DXC
US$ 6.00
+Info
300020
US$ 6.00
+Info
300024
US$ 6.00
+Info
300019
ECCO - HP Bur Spiral Cut 63B
US$ 6.00
+Info
300013
ECCO - HP Bur Spiral Cut 63BXC
US$ 6.00
+Info
300012
ECCO - HP Bur Spiral Cut 82TXC
US$ 6.00
+Info
300009
ECCO - HP Bur Spiral Cut 82TXF
US$ 6.00
+Info
21/05/2010 / 1284
Name
33
Burs Cutter Carbide
3/32 Cross cut
300011
ECCO - HP Bur Spiral Cut 84TXC
US$ 6.00
+Info
300008
ECCO - HP Bur Spiral Cut 84TXF
US$ 6.00
+Info
300032
ECCO - HP Bur Spiral Cut 88ASP
US$ 6.00
+Info
ECCO - 300003 HP Bur Spiral Cut 61A
US$ 6.00
61A - Spiral Cut Carbide Bur HP 3/32Shank [ SH0614 ]
Burs Cutter Carbide
3/32 Diamond Cut
3/32 BUR CUTTER DIAMOND CUT
Keystone )
Max Cut (
- Reduced vibration
- Long tool life
- Minimal clogging
Long lasting carbide combined with a new technique of alternate diamond cutting on most
burs provides benefits never before possible
Price
+
034-1202144
Code
KEYSTONE - 51A Laboratory Carbide Bur Diamond Maxi Cut -3/32 ...
Name
US$ 11.05
+Info
034-1202143
KEYSTONE - 52C Laboratory Carbide Bur Diamond Maxi Cut --3/32 ...
US$ 11.05
+Info
034-1202142
KEYSTONE - 52D Laboratory Carbide Bur Diamond Maxi Cut -3/32 ...
US$ 11.05
+Info
034-1202141
US$ 11.05
+Info
034-1202172
KEYSTONE - 53A Laboratory Carbide Bur Diamond Mini Cut -3/32 ...
US$ 11.05
+Info
034-1202139
KEYSTONE - 63B Laboratory Carbide Bur Diamond Maxi Cut -3/32 ...
US$ 12.50
+Info
034-1202138
KEYSTONE - 73C Laboratory Carbide Bur Diamond Maxi Cut -3/32...
US$ 12.50
+Info
034-1202133
US$ 12.50
+Info
034-1202134
KEYSTONE - 84T Laboratory Carbide Bur Diamond Maxi Cut -3/32 ...
US$ 12.50
+Info
034-1202136
KEYSTONE - 82TXC Laboratory Carbide Bur Diamond Maxi Cut -3/32 ...
US$ 12.50
+Info
3/32 BUR CUTTER DIAMOND CUT - ( Ecco )
- Reduced vibration
- Long tool life
- Minimal clogging
Long lasting carbide conbined with a new technique of alternate diamond cutting on most burs provides
benefits never before possible
Code
34
Price
+
300017
ECCO - HP Bur Diamond Cut 84T
Name
US$ 8.00
+Info
300018
ECCO - HP Bur Diamond Cut 82T
US$ 8.00
+Info
300034
ECCO - HP Bur Diamond Cut 47XC
US$ 8.00
+Info
300033
ECCO - HP Bur Diamond Cut 47XF
US$ 8.00
+Info
21/05/2010 / 1284
Burs Cutter Carbide
3/32 Diamond Cut
3/32 BUR CUTTER DIAMOND CUT Fine Cut (
Keystone )
- Reduced vibration
- Long tool life
- Minimal clogging
Long lasting carbide combined with a new technique of alternate diamond cutting on most
burs provides benefits never before possible
Price
+
101135
Code
KEYSTONE - 47XC Bur 3/32 Diam Min Cut
US$ 11.05
+Info
101134
KEYSTONE - 47XF Bur 3/32 Diam Min Cut
US$ 11.05
+Info
034-1202174
KEYSTONE - 52-C Bur-3/32 Diam Cut.Min
US$ 11.05
+Info
KEYSTONE - 52-DS Bur 3/32 Diam Min Cut
US$ 11.05
+Info
034-1202171
KEYSTONE - 61-A Bur-3/32 Diam Cut.Min
US$ 11.05
+Info
034-1202168
US$ 11.05
+Info
034-1202164
US$ 11.05
+Info
034-1202165
KEYSTONE - 88-T Bur-3/32 Diam Cut.Min
US$ 11.05
+Info
034-1202163
KEYSTONE - 88T4 Bur-3/32 Diam Cut.Min
US$ 12.50
+Info
034-1202167
KEYSTONE - 88TXF Bur3/32 Diam Cut.Min
US$ 11.05
+Info
KEYSTONE - SP1 Bur 3/32 Diam Min Cut
US$ 12.50
+Info
101133
101132
Name
Burs Cutter Carbide
3/32 Spiral Cut Bur Cutters
3/32 BUR CUTTER SPIRAL CUT (
Keystone )
- Precision burs that require less pressure and cut smoothly with
minimum heat
- Hand ground to insure quality control
Price
+
034-1201960
Code
KEYSTONE - 31-P Bur-3/32 Shnk Spiral Cut
US$ 7.25
+Info
034-1201970
US$ 7.25
+Info
034-1201980
KEYSTONE - 33-C Bur-3/32 Shnk Spiral Cut
US$ 7.25
+Info
034-1201950
US$ 7.25
+Info
034-1201940
US$ 8.50
+Info
034-1201930
KEYSTONE - 51-A Bur-3/32 Shnk Spiral Cut
US$ 8.50
+Info
034-1201920
US$ 8.50
+Info
034-1201915
KEYSTONE - 52-Ds Bur-3/32 Shnk Spiral Cut
US$ 8.50
+Info
034-1201900
US$ 8.50
+Info
034-1201890
US$ 8.50
+Info
034-1201880
KEYSTONE - 63-B Bur-3/32 Shnk Spiral Cut
US$ 8.50
+Info
034-1201990
KEYSTONE - 71-G Bur-3/32 Shnk Spiral Cut
US$ 7.25
+Info
21/05/2010 / 1284
Name
35
Burs Cutter Carbide
034-1201870
US$ 8.50
+Info
034-1201860
US$ 8.50
+Info
034-1201850
KEYSTONE - 82-T Bur-3/32 Shnk Spiral Cut
US$ 8.50
+Info
034-1201840
KEYSTONE - 83-E Bur-3/32 Shnk Spiral Cut
US$ 8.50
+Info
034-1201830
KEYSTONE - 84-T Bur-3/32 Shnk Spiral Cut
US$ 8.50
+Info
034-1201820
US$ 8.50
+Info
3/32 GOLDEN CUTTER SPIRAL CUT (
Keystone )
- Coated with gold colored Titanium Nitride
- High speed
- Faster cutting
- Longer lasting
Price
+
034-1202365
Code
KEYSTONE - Gold 31-P Bur-3/32 Shnk Spiral
Name
US$ 12.80
+Info
1202375
US$ 12.80
+Info
034-1202355
US$ 12.80
+Info
034-1202360
KEYSTONE - Gold 44-C Bur-3/32 Shnk Spiral
US$ 12.80
+Info
034-1202340
KEYSTONE - Gold 51-A Bur-3/32 Shnk Spiral
US$ 12.80
+Info
034-1202330
US$ 12.80
+Info
034-1202345
KEYSTONE - Gold 52-D Bur-3/32 Shnk Spiral
US$ 12.80
+Info
034-1201910
KEYSTONE - Gold 52-D Bur-3/32 Shnk Spiral
US$ 8.50
+Info
034-1202325
US$ 12.80
+Info
034-1202320
KEYSTONE - Gold 63-B Bur-3/32 Shnk Spiral
US$ 12.80
+Info
034-1202380
KEYSTONE - Gold 71-G Bur-3/32 Shnk Spiral
US$ 12.80
+Info
1202350
US$ 12.80
+Info
034-1202315
US$ 12.80
+Info
034-1202335
KEYSTONE - Gold 82-T Bur-3/32 Shnk Spiral
US$ 12.80
+Info
1202310
KEYSTONE - Gold 83-E Bur-3/32 Shnk Spiral
US$ 12.80
+Info
034-1202305
KEYSTONE - Gold 84-T Bur-3/32 Shnk Spiral
US$ 12.80
+Info
034-1202300
US$ 12.80
+Info
034-1202295
KEYSTONE - Gold 88-T4 Bur-3/32 Shnk Spira
US$ 15.06
+Info
Burs Cutter Carbide
www.usdentaldepot.com 1 954 874 63255 Florida USA
36
21/05/2010 / 1284
Burs Cutter Carbide
3/8 BUR CUTTER DIAMOND CUT - ( Keystone )
- Reduced vibration
- Long tool life
- Minimal clogging
3/8 BUR CUTTER DIAMOND CUT - Coarse ( Keystone )
Price
+
034-1202125
Code
KEYSTONE - 3/8-A Bur-3/8 Diam Cut.Max
Name
US$ 19.95
+Info
034-1202126
KEYSTONE - 3/8-B Bur-3/8 Diam Cut.Max
US$ 19.95
+Info
034-1202128
KEYSTONE - 3/8-D Bur-3/8 Diam Cut.Max
US$ 19.95
+Info
034-1202129
KEYSTONE - 3/8-E Bur-3/8 Diam Cut.Max
US$ 19.95
+Info
3/8 BUR CUTTER DIAMOND CUT - Fine ( Keystone )
Price
+
034-1202156
Code
KEYSTONE - 3/8-A Bur-3/8 Diam Cut.Min
Name
US$ 20.52
+Info
034-1202159
KEYSTONE - 3/8-D Bur-3/8 Diam Cut.Min
US$ 20.52
+Info
034-1202160
KEYSTONE - 3/8-E Bur-3/8 Diam Cut.Min
US$ 18.66
+Info
3/8 BUR CUTTER SPIRAL CUT - ( Keystone )
- Carbide Bur for cuting and finishing
- Precision burs that require less pressure and cut smothly with minimum heat
- Hand Ground to insure quality control
Price
+
034-1201730
Code
KEYSTONE - 3/8-A Bur-3/8 Shnk Spiral Cut
Name
US$ 13.60
+Info
034-1201740
KEYSTONE - 3/8-B Bur-3/8 Shnk Spiral Cut
US$ 13.60
+Info
034-1201750
KEYSTONE - 3/8-C Bur-3/8 Shnk Spiral Cut
US$ 13.60
+Info
034-1201760
KEYSTONE - 3/8-D Bur-3/8 Shnk Spiral Cut
US$ 13.60
+Info
3/8 GOLD BUR CUTTER SPIRAL CUT - ( Keystone )
Code
034-1202255
21/05/2010 / 1284
Name
KEYSTONE - Gold 3/8-A Bur-3/8 Shnk Spiral
Price
+
US$ 20.52
+Info
37
Burs Cutter Carbide
034-1202260
KEYSTONE - Gold 3/8-B Bur-3/8 Shnk Spiral
US$ 20.52
+Info
1202265
KEYSTONE - Gold 3/8-C Bur-3/8 Shnk Spiral
US$ 20.52
+Info
034-1202270
KEYSTONE - Gold 3/8-D Bur-3/8 Shnk Spiral
US$ 20.52
+Info
1202275
KEYSTONE - Gold 3/8-E Bur-3/8 Shnk Spiral
US$ 20.52
+Info
Burs Cutter Carbide
NK 3/32 Bur Cutters
3/32 NK BUR CUTTER - ( Keystone )
- Reduced vibration
- Long tool life
- Minimal clogging
Price
+
034-1202000
Code
KEYSTONE - NK-1 Bur-3/32 Shnk Spiral Cut
Name
US$ 7.25
+Info
034-1202010
US$ 7.25
+Info
034-1202020
US$ 7.25
+Info
034-1202030
US$ 7.25
+Info
034-1202040
US$ 7.25
+Info
034-1202050
US$ 7.25
+Info
034-1202060
US$ 7.25
+Info
034-1202070
US$ 7.25
+Info
Burs Diamond
HP DIAMOND COATED BUR ( Ecco
)
Code
38
Price
+
102163
ECCO - ECCO HP Diam Coated Bur DC1
Name
US$ 1.90
+Info
102164
US$ 1.90
+Info
102165
US$ 1.90
+Info
102168
US$ 1.90
+Info
102169
US$ 1.90
+Info
21/05/2010 / 1284
Burs Diamond
102170
US$ 1.90
+Info
102171
US$ 1.90
+Info
102172
US$ 1.90
+Info
102173
US$ 1.90
+Info
102174
US$ 1.90
+Info
102175
US$ 1.90
+Info
102176
US$ 1.90
+Info
102177
US$ 1.90
+Info
102178
US$ 1.90
+Info
102179
US$ 1.90
+Info
102180
US$ 1.90
+Info
Burs Sintered
Diamond Sinter Burs
COARSE HP SINTER DIAMOND (
Keystone )
*Lasts 50 times longer than regular stones
*Extremely high cutting efficiency
*Diamonds do not create dust
*Very user friendly
*Super coarse black- chrome, cobalt, non-precious and hard
metals
*Coarse blue - porcelain
*Alloy frame preparation
Price
+
034-1290665
Code
KEYSTONE - #1 Coarse Blue Flt Cone
Name
US$ 24.54
+Info
034-1290735
KEYSTONE - #2 Coarse Blue Flat Cir
US$ 25.08
+Info
034-1290585
KEYSTONE - #3 Coarse Blue Lng Cyli
US$ 23.68
+Info
034-1290685
KEYSTONE - #4 Coarse Blue Shp Cone
US$ 25.69
+Info
034-1290725
KEYSTONE - #5 Coarse Blue Wde Cone
US$ 23.68
+Info
034-1290615
KEYSTONE - #6 Coarse BlueFlt Cyli
US$ 23.68
+Info
034-1290635
KEYSTONE - #7 Coarse Blue Rd Cone
US$ 25.38
+Info
034-1290675
KEYSTONE - #8 Coarse Blue XLg Cone
US$ 24.54
+Info
034-1290575
KEYSTONE - #9 Coarse Blue Sm Cone
US$ 23.68
+Info
034-1290595
KEYSTONE - #10 Coarse Blue Lg Cyli
US$ 23.68
+Info
034-1290605
KEYSTONE - #11 Coarse Blue Rd Cyli
US$ 23.68
+Info
034-1290625
KEYSTONE - #12 Coarse Blue Pt Cone
US$ 23.68
+Info
034-1290645
KEYSTONE - #13 Coarse Blue Lg Cone
US$ 26.66
+Info
034-1290655
KEYSTONE - #14 Coarse Blue Md Cyli
US$ 27.21
+Info
034-1290740
KEYSTONE - Sin Diam Bur Kit Coarse 12pk
US$ 258.18
+Info
HP SINTER DIAMOND ( Ecco )
Code
100448
21/05/2010 / 1284
Name
ECCO - ECCO HP Sintered Diam-Cylinder
Price
+
US$ 7.00
+Info
39
Burs Sintered
Diamond Sinter Burs
100449
ECCO - ECCO HP Sintered Diam - Bullet
US$ 7.00
+Info
100450
ECCO - ECCO HP Sintered Diam -Tapered
US$ 7.00
+Info
100451
ECCO - ECCO HP Sintered Diam - Flame
US$ 7.00
+Info
100452
ECCO - ECCO HP Sintered Diam - Cone
US$ 7.00
+Info
100453
ECCO - ECCO HP Sintered Diam - Point
US$ 7.00
+Info
SUPER COARSE HP SINTER
DIAMOND ( Keystone )
Available in a vast range of shapes
More Durable and Last Longer than brands commonly found in
the Dental Market
Price
+
034-1290660
Code
KEYSTONE - #1 Super Coarse Black Flt Cone
Name
US$ 24.54
+Info
034-1290730
KEYSTONE - #2 Super Coarse Black Flat Cir
US$ 25.08
+Info
034-1290580
KEYSTONE - #3 Super Coarse Black Lng Cyli
US$ 23.68
+Info
034-1290680
KEYSTONE - #4 Super Coarse Black Shp Cone
US$ 25.69
+Info
034-1290720
KEYSTONE - #5 Super Coarse Black Wde Cone
US$ 29.00
+Info
034-1290610
KEYSTONE - #6 Super Coarse Black Flt Cyli
US$ 23.68
+Info
034-1290630
KEYSTONE - #7 Super Coarse Black Rd Cone
US$ 23.68
+Info
034-1290670
KEYSTONE - #8 Super Coarse Black XLg Cone
US$ 24.54
+Info
034-1290570
KEYSTONE - #9 Super Coarse Black Sm Cone
US$ 23.68
+Info
034-1290590
KEYSTONE - #10 Super Coarse Black Lg Cyli
US$ 23.68
+Info
034-1290600
KEYSTONE - #11 Super Coarse Black Rd Cyli
US$ 23.68
+Info
034-1290620
KEYSTONE - #12 Super Coarse Black Pt Cone
US$ 23.68
+Info
034-1290640
KEYSTONE - #13 Super Coarse Black Lg Cone
US$ 26.66
+Info
034-1290650
KEYSTONE - #14 Super Coarse Black Md Cyli
US$ 27.99
+Info
034-1290740_A KEYSTONE - Sin Diam Bur Kit S.Coarse 12pk
US$ 286.92
+Info
Cartridges aluminum empty
22 mm Diameter
ALUMINUM CANS 22mm Diam ( Ecco )
*Empty alumin cans for flexible materials and thermoplastic acrylics
*Compatible with Valpast, Duracetal, Flexite, TCS, CFS, etc
Older Flexite Injection System:
(1 + 3/32 Inch diameter) Small (1.5 Inches), Medium (2.5 Inches), Large (3.5 Inches), Extra- Large (4.5 Inches)
New Flexite Model F-3 Injection System, Valplast, Inductor KFT, TCS, and Dentsply-FRS Injection System, GFM
and CFS system :
(1 Inch diameter)Small (1.75 Inches), Med (2.75 Inches), Large (4 Inches), Extra Large (4.75 Inches)Dental D, Pressing
J-100 & J-200, Flexiplast & Polypress Injection Systems:
(21.7 mm diameter)9 Gram-Small (2 inches), 16 Gram-Medium (3.5 Inches), 20 Gram-Large (4.5 Inches),
Code
40
Price
+
101692
ECCO - Alum. Can w/Cap 22mm Medium
Name
US$ 0.80
+Info
101691
ECCO - Alum. Can w/Cap 22mm Large
US$ 0.80
+Info
21/05/2010 / 1284
25 mm Diameter
25 mm Diameter
ALUMINUM CANS 25mm Diam ( Ecco )
Empty alumin cans for flexible materials and thermoplastic acrylics*Compatible with Valpast, Duracetal, Flexite, TCS,
CFS, etc
Older Flexite Injection System:
(1 + 3/32 Inch diameter) Small (1.5 Inches), Medium (2.5 Inches), Large (3.5 Inches), Extra- Large (4.5 Inches)
New Flexite Model F-3 Injection System, Valplast, Inductor KFT, TCS, and Dentsply-FRS Injection System,
GFM and CFS system :
(1 Inch diameter)Small (1.75 Inches), Med (2.75 Inches), Large (4 Inches), Extra Large (4.75 Inches)Dental D,
Pressing J-100 & J-200, Flexiplast & Polypress Injection Systems:
(21.7 mm diameter)9 Gram-Small (2 inches), 16 Gram-Medium (3.5 Inches), 20 Gram-Large (4.5 Inches),
Price
+
101690
Code
ECCO - Alum. Can w/Cap 25.4mm XX-larg
Name
US$ 0.80
+Info
200148
ECCO - Alum. Can w/Cap 25.4mm Large
US$ 0.80
+Info
200149
ECCO - Alum. Can w/Cap 25.4mm Medium
US$ 0.80
+Info
101952
ECCO - Alum. Can w/Cap 25.4mm Small
US$ 0.80
+Info
Casting Accessories
Alloy rings
ALLOY CASTING RINGS ( Keystone )
- Shapes Available: Round and Oval
- Diamters Available: 35mm, 40mm, 45mm, 50mm, 65mm, 80mm, and 90mm
- Even after repeated heatings they remain precision fitting and stable in size
-They do not flake, corrode, or peel away, thus they have an unusually long life
Code
Price
+
KEYSTONE - Metal Casting Rings - 1-1/4 x 1-1/4in ( 35mm x35mm ) Stainless Steel - Hi Temp ...
US$ 4.65
+Info
034-1070070
KEYSTONE - Metal Casting Rings - 1-1/4 x 1-1/2in - ( 35mm x 40mm ) Stainless Steel - Hi T...
US$ 4.84
+Info
1070060
KEYSTONE - Metal Casting Rings - 1-1/4 x 1-3/4in ( 35mm x45mm ) - Stainless Steel - Hi T...
US$ 4.05
+Info
034-1070080
KEYSTONE - Metal Casting Rings - 1-1/2 x 1-1/2in - ( 40mm x 40mm ) Stainless Steel - HI Te...
US$ 4.84
+Info
1070085
KEYSTONE - Metal Casting Rings - 1-1/2 x 1-3/4in ( 40mm x 45mm ) Stainless Steel - Hi Te...
US$ 4.05
+Info
034-1070090
KEYSTONE - Metal Casting Rings - 1-3/4 x 1-1/2in - ( 45mm x 40mm ) Stainless Steel - HI T...
US$ 4.84
+Info
034-1700100
KEYSTONE - Metal Casting Rings - 1-3/4 x 1-3/4in - ( 45mm x 45mm ) Stainless Steel - Hi...
US$ 4.84
+Info
1070040
KEYSTONE - Metal Casting Rings - 1-3/4 x 2in ( 45mm x 50mm ) Stainless Steel - Hi Temp - ...
US$ 19.52
+Info
034-1700110
KEYSTONE - Metal Casting Rings - 2 x 2in ( 50mm x 50mm ) Stainless Steel - Hi Temp - ...
US$ 4.84
+Info
034-1700120
KEYSTONE - Metal Casting Rings - 2-1/2 x 2in ( 65mm x 50mm ) Stainless Steel - Hi Temp - ...
US$ 4.84
+Info
034-1700130
KEYSTONE - Metal Casting Rings - 3 x 2-1/2in - ( 80mm x 50mm ) Stainless Steel - Hi Temp -...
US$ 9.00
+Info
034-1700140
KEYSTONE - Metal Casting Rings - 3-1/2 x 2-1/2in ( 90mm x 50mm ) - Stainless Steel - Hi T...
US$ 14.40
+Info
1070050
21/05/2010 / 1284
Name
41
Casting Accessories
Casting Ring Liner
Casting Accessories
Casting Ring Liner
RING LINERS ( Keystone )
*Asbestos free
*Made of refractory fibers with a melting point in excess of 3200 degrees
*Sold in 50ft rolls
Price
+
101147
Code
KEYSTONE - Casting Ring Liner 35x0.80mm
Name
US$ 10.96
+Info
101148
US$ 14.35
+Info
101149
US$ 12.78
+Info
101150
US$ 16.70
+Info
101151
US$ 18.65
+Info
101152
US$ 23.09
+Info
101153
US$ 21.92
+Info
101154
US$ 26.10
+Info
101155
US$ 34.95
+Info
Casting Accessories
Casting tongs
KEYSTONE-034-1620037 Tongs- Casting 15 Scissor Type
US$ 29.16
- Ring tongs
- Flask tongs
- Plier
Casting Accessories
Crucible formers
CRUCIBLE FORMER ( Keystone )
Code
42
Price
+
034-1700141
KEYSTONE - Rubber Crucible Former - Black - 1-1/4inch in Diameter - ...
Name
US$ 5.95
+Info
034-1700142
KEYSTONE - Rubber Crucible Former- Black 1-1/2inch in Diameter ...
US$ 5.67
+Info
034-1700143
KEYSTONE - Rubber Crucible Former - Black - 1-3/4inch in Diameter ...
US$ 5.79
+Info
034-1700144
KEYSTONE - Rubber Crucible Former - Black - 2inch in Diameter ...
US$ 5.92
+Info
034-1700145
US$ 6.93
+Info
034-1700146
KEYSTONE - Rubber Crucible Former - Black- 3inch in Diameter ...
US$ 5.58
+Info
034-1700147
US$ 5.58
+Info
21/05/2010 / 1284
Casting Accessories
Crucible formers
NOBILIUM- N-1007 Plastic Sprue Former [blue]
US$ 3.20
Plastic Sprue Former [Hollow blue] [convenient funnel shape that provides an easy mothod for spruing partial dentures ]
NOBILIUM- N-62167 Plastic Sprue Former [white]
US$ 8.00
Plastic Sprue Former [Solid White] [Sprue cones are specially designed for use with CMPs Modular-type electronic Induction Casting
Machines ]
Casting Accessories
Crucibles all types
EDG- 102295 Crucibles for Powercast
US$ 28.00
Crucibles for Induction casting machine Powercast each - crisoles para maquina de induccion
ECCO - 100126 Hi Heat Quartz Cruc. Slotted
US$ 7.00
ECCO Hi Heat Quartz Crucible (Broken Arm Casting) . Slotted Kerr Compatible- Std base (crisol)
ECCO - 100044 Hi Heat Quartz Cruc.Round orif
US$ 7.00
ECCO Hi Heat QUARTZ Crucible Medium Round Orifice - For Broken Arm Casting Kerr Compatible- Sandard base
(crisol)
Casting Accessories
Ringless formers
ECCO - 045-32999 Cast Ringless 40mm 90gr
US$ 17.00
ECCO Casting Ringless and Crucible Former #4093 - 1-1/2inch Diameter [ 40mm ] - 90gr - Ring Clear - Cap Made of PVC allows equal expansion in all directions with interlocking tapered ring & base [J#CA7152]
[Ringless]
ECCO - 045-33006 Cast Ringless 50mm 180gr
US$ 17.00
Castings Ringless and Crucible Formers #4094 2inch Diameter [ 50mm ] - 180gr Ring Clear - Cap - Made of
PVC allows equal expansion in all directions with interlocking tapered ring & base [J# CA7154] [Ringless ]
21/05/2010 / 1284
43
Casting Accessories
Ringless formers
ECCO - 101093 Cast Ringless 65mm 240gr
US$ 22.00
ECCO Castings Ringless and Crucible Formers #409$ 2-1/2inch Diameter [ 65mm ] - 240gr - Ring Clear - Cap
- Made of PVC allows equal expansion in all directions with interlocking tapered ring & base [J# CA7156]
[Ringless ]
ECCO -100477 ECCO Ringless Casting system
US$ 18.00
ECCO Ringless Casting system Set 4pcs with 4 Crucible Formers and Oring- Small Medium Large Oval [casting ringless Super-Rings)
ECCO - 100467 Press Ringless 40mm 90gr
US$ 19.00
ECCO Press Ringless And Crucible Formers - 90gr - Ringless 1-1/2inch Diameter [ 40mm ] - Ring Clear Cap
[L# CA7100 ] [ aro silicona para porcelana prensada ]
ECCO - 100468 Press Ringless 50mm 180gr
US$ 19.00
ECCO Press Ringless And Crucible Formers - 180gr - Ringless 2inch diameter [ 65mm ] -Ring Clear Cap [L#
CA7102 ] [ aro silicona para porcelana prensada - formador de crisol ]
Casting Accessories
Wetting Agent
BEGO - 105064 Aurofilm Wetting Agent 3.5oz
US$ 20.00
- Wetting agent for investment and releasing the surface tension of silicone duplicating mouldsReliable
preparation agent for investment in CrCo as well as crown and bridge work.
- Aurofilm eliminates the water-repellent effects of the wax pattern ensuring smooth casting surfaces.
- Aurofilm is also used successfully in the silicone duplication technique to reduce surface tension.
Casting Units
Accesories for Casting Units
44
21/05/2010 / 1284
Casting Units
HANDLER - 103493 #74CW Casting Well w/cover
US$ 361.62
#74CW Casting Well with cover - 9x14in [H# 74CW ] Weight 73lb
Casting Units
Casting Wells
HANDLER - 103526 #235W Casting Well
US$ 349.99
- A casting well made of heavy gauge sheet steel with steel and transite base.
- Finished in a durable, baked coating.
- Shipping Wgt.: 65 lbs. [29.5 kg]
- Unit Dimensions: 18 diameter x 14 high [46cm x 36cm]
- For Installation Inside Metal Benches
- Model: 235W
DIXON -100891 Dixon Casting Well/Guard 60cm
US$ 189.00
Dixon-Casting Well/Guard - An eight sided casting guard which accommodates casting machines with up to a
23.5in [60cm] arm swing -with sheet metal base and hinged cover to help guard centrifugal casting machines - [
protection aro proteccion centrifuga cuna ] Unit Dimensions: 23.5 in diameter x 11.5 in high [60cm x 29cm] Weight:
23lbs
KERR -100894 Kerr Casting Well/Guard 48cm
US$ 190.40
Kerr-Casting Well/Guard - A Cylindric casting guard which accommodates casting machines with up to a 19in
[48cm] arm swing - NO base and NO cover [ protection aro proteccion centrifuga cuna] Unit Dimensions: 19 in
diameter x 14 in high [48cm x 35.5cm]
Casting Units
Centrifugal Units
HANDLER - 103492 #74 Exac-U-Cast
US$ 536.76
- A Centrifugal Casting Machine designed for use in casting precious and non-precious metals.
- The Exac-U-Cast features a hardened steel center shaft which is mounted between two double
shielded ball bearings.
- A large centrifugal spring powers the heavy duty casting arm during casting operations.
- Unit sold complete with 1 3/4 [4.4cm] stainless casting ring, 1 3/4 [4.4cm] rubber sprue former,
three casting ring cradles for popular size casting rings, flask tongs and assortment of DLA
Hollow.
- Plastic Sprues.Shipping Wgt.: 18 lbs [8.2 Kg]
- Unit Dimensions: 16 1/2 diameter x 10 1/2 high [24cm x 26.7cm]
21/05/2010 / 1284
45
Casting Units
Centrifugal Units
ACCUCAST CASTING MACHINES ( Buffalo )
- The rugged, improved, patented centrifugal casting machine with pre-calibrated balacing that helps ensure
superior, dense casting every time.
490 mm (19.3 inches - arm length)
178 mm x 165 mm (7 inches x 6.5 inches - base housing)
317 mm (12.5 inches - overall height)
- AccuCast Complete System (#106826) includes
1 Type 'A' crucible,
4 Steel Ring Flasks,
4 Cradles,
4 Rubber Sprue Bases,
2 Flask Tongs and
1 Crucible Carrier Adapter.
- AccuCast(# 106827) includes Crucible and Adapter Only.
Price
+
106827
Code
BUFFALO - Buffalo Casting Machine - Accucast with Crucible and Adapter Only (#28008)
Name
US$ 602.00
+Info
106826
BUFFALO - Buffalo Casting Machine - Accucast Complete System (B#28007)
US$ 686.00
+Info
EDG- 100207 C1 Casting Electric Centrifuge
US$ 2,340.00
EDG CASTING ELECTRIC CENTRIFUGE
*With Electrical Achievement
*Acceleration Control
*RPM and Timing Control
*Weight Balance Control
*Stainless Steel
*Dimensions: 475 x 450 x 570mm
*Weight: 39.5Kg
*One Year Warranty On Muffles
*The Security Door That Initializes The Centrifuge After
Closing the Door Automatically
*Drop shipped From Factory Location
EDG is The Bigest Furnace Manufacturer in Brasil
WWW.EDG.COM.BR
Casting Units
Induction Casting units
46
21/05/2010 / 1284
Casting Units
EDG- 100208 Powercast Induc Casting
Centr.
US$ 8,800.00
EDG- Powercast Induction Casting Centrifugal Machine - all common
used alloys - Color Tempeature Sensor - Fully automatic casting - Argon
injection system included - Refrigeration system (separated) - 220 volts 60hz- Dimensions : Wide : 630mm - Height : 530mm - Deep : 700mm Weight : 65Kg [ 99 kg with wood craddle ] - Volts 220 - Consumption :
3Kw max - 14 Amp - MADE IN BRASIL - WWW.EDG.COM.BR - ( EDG
is the bigest furnace manufacturer in Brasil ) Furnaces : also with ONE
year warranty on the muffles - SINTERIZARTION FURNACES - 2 years
warranty on the muffles - [dental lab equipment horno de porcelana]
POWER CAST 1700 INDUCTION CASTING MACHINE Technical
information.
Supply Tension: 220 volts diphasic.
Network frequency:--------------------50/60 Hz.
Maximum power:---------------------- 3.000 Watts
Maximum current:--------------------- 14 amp.
Casting maximum temperature:------- 1.750C
Water flow at 2kgr/cm:-------------- 4 liters /min
Argon flow :----------------------------- 10 liters / min
Maximum refrigeration water temperature:- 35C
Maximum room temperature.---------- 40C
Net weight:------------------------------ 63 Kg.
Width------------------------------------ 0,6 m
Height------------------------------------ 0,53 m
Depth------------------------------------ 0,72 m
Casting time: 0,6 gr/sec (nickel chromium alloy, casting temperature
of 1.340c)
System operation: continuous, without cycles of limit.
Maximum velocity of the centrifuge arm: 450rpm
Minimum velocity of the centrifuge arm: 350rpm
Maximum diameter of the casting ring: 120mm 4.71 inches
Maximum length of the casting ring: 80mm 3.5 inches
Casting maximum capacity: 100 gr nickel chromium alloy.
Metals that can be casting: except titanium.
Package contains - Equipment. - 3 ceramic melting pots. - 3 ceramic
receptors. - 5 ring mountings of several measures. - 1 water entrance
hose. - 1 water exit hose. - 1 steel receptacle. - 1 water pressure
inspection device. - 1 bracket. - Instruction manual. - Warranty
certificate. Equipment with argon device is accompanied by one
more hose and 2 brackets.
*Drop Shipped From Factory Location
Chissels electric and neumatic
21/05/2010 / 1284
47
VH- 100776 Neumatic Chisel Kit Complete
US$ 222.00
- Hand piece with 3 tips ( screw dreiver - point - and model saw )
- Includes arch for 3inches saw blades
- Pedal and hand piece holder
- Removes gypsum from dentures
- Dentures from flasks
-Investment from rings
- No risk to get hurt
- No more use of Hammers
- 80-100 lb of air pressure
- 2 years warranty
Composites
Light Cure Lab Composite
ECCO - 101309 LC Flow Comp Lab 4x1.2gr syr
US$ 23.50
- Flowable Composite Syringes - 1.2 grams - 4 per box plus 20 applicator tips [J# 567-300 ]
- Easy to applyflowable-small particle composite with superb polishability
- Ideal for class I- III- IV & V restorations
- Base forpulpal floor- proximal gingival box and undercut repair.
Compressor
ECCO- 101379 Oil Free 110v 40 Lts 130lb
US$ 875.00
Oil-free Compressor for Dentistry ECCO 1620
Remark
- Model: ECCO 1620
- One by two dental chair
- Power Supply 110V 50Hz
- Engine Power 1*750w
- Air Production Capacity 110L/min (0.4Mpa)
- Noise 58dB
- Max Pressure 0.8 MPa
- On/Off Pressure 0.55 MPa
- Rotation Speed 1400r/min
- Air Tank Volume 40L
- Overall Dimmension 410x410x600mm
Compressor
Parts for compresosrs
48
21/05/2010 / 1284
Compressor
ECCO- 101768 Pressure Reg. Gauge f/ Air
US$ 95.00
Pressure Regulator- Gauge for Compressed Air- Each
Curing Units
Boil out curing units
BOIL OUT / WASHOUT UNITS (
Handler )
All units specifications :
- Built in 18 ga. stainless steel tanks
- Tank Dimensions: 18in x 14in x 12in deep [46cm x 30cm x
30cm] and 10in x 14in x 10in deep [25cm x 36cm x 25cm]
- with inside handles
- 4 Faucets included ( Some models )
- Pump for recirculating the water and filter for wax
- Some models comes Complete with handler boilout cabinet
#261 included in the price
in these caswes , external dimensions are *Unit
Dimensions: 36? wide x 24? deep x 38? high [89cm x 59cm x
93cm]
check individual specification in each item description
Code
Name
103530
HANDLER - Boilout/washout 2 Tanks-Elec
103529
103527
Cbnet
Gas/Elec
Faucets
Weight
Price
+
2 /18 gal
No
Elect
4
175 lbs
US$ 4,900.00
+Info
HANDLER - Boilout/Washout 2 Tanks-Electr 26105 SSWEL
2 /18 gal
Yes
Elect
4
250 lbs
US$ 5,999.00
+Info
HANDLER - Boilout/Curing Double Tank-Ele 26102
2 /18 gal
No
Elect
Opt
100 lbs
US$ 3,320.63
+Info
100875
HANDLER - Boilout/Washout 2 Tanks-Gas
26105 SSWCG
2 /18 gal
yes
Gas
4
250 lbs
US$ 5,999.00
+Info
100874
HANDLER - Boilout/Curing Double
Tank-Gas
HANDLER - Boilout/washout 2 Tanks-Gas
26102
2 / 18 gal
No
Gas
Opt
100 lbs
US$ 3,320.63
+Info
26105
2 /18 gal
No
Gas
4
175 lbs
US$ 4,900.00
+Info
100871
MF#
26105 EL
# Tnks
KEYSTONE - 34-1050159 Curing Unit for 8 Flasks 110v
US$ 382.50
Keystone Denture Curing Unit
- Stainless construction for easy cleaning and anti-corrosion
- Can beused for both boil out and curing
- Thermostatic control for variable holding temperatures
- Cures upto 4 double flask compresses (8) denture arches UL listed
- Valve\spigot for easy emptying of water -110volt - 1380watts [polymerizator polimerizadoras
- Shipping Information: Weight 17lbs
-Dimensions : Height 16in x width 15in x depth 12in
21/05/2010 / 1284
49
Curing Units
Light curing units www.usdentaldepot.com - [email protected] - 1 1-866-625-5558 - 1-954-874-6325
Curing Units
Light curing units SELECT- 1901450 LC Maxi- Cure Lt 4 lamp 110v
US$ 244.00
- Maxi-Cure Light
- Complete light curing unit with 5 and 10 minute timer - 4 lamps
- [11in wide x 5 in dephx 4.25in deep] - [27.5cm x 12.5cm x10.6cm]- 110vol [S# 1901450]
- 1 year warranty - light uses four 9 watt bulbs [included] and cures most light activated compsites
including megatray
- Heavy duty construction makes the maxi cure light cure box a reliable way to cure materials 16x12x10 12lbs
VH- 100833 LED Strbio & UV Light Cur Unit
US$ 722.00
VH PHOTON LIGHT CURING LIGHT UNIT
*Digital Timer
*Set Up of 3 Different Type of Curing Lights
* Stroboscopic Light
*6 LED Lamps
*2 Ultraviolet Bulbs
*18 Month Warranty -Including Bulbs
*Frequency 50-60HZ
*110/220V
*Dimensions: 290 x 167 x 232mm
*Weight 4.4LB
*Power Max: 5Watts
*Incorporated Pre-Polimerizer LED to Improve and Faclitate work with Resin
*Rotational Platform to Guarantee Light Acess to All Work
Curing Units
Pressure Pot 1.5Gal
ECCO - 102522 ECCO-Press Pt W/Heat 1.5g 110V
US$ 330.75
ECCO-Pressure Pot with HEATER - 6QT - 110V
- Made from alumunum - Includes a heatcontrolled thermostat
- Internal Gauge
- Temperatures are - adjustable and a lock valve allowsthe airline to release from the pressure pot
[curing unit]
50
21/05/2010 / 1284
Curing Units
Pressure Pot 1.5Gal
CFS - 280106 Pres Pot w/Heater 1.5gal 110v
US$ 355.25
CFS PRESSURE POT W/ HEATER 1.5 GALLON
- Pressure Pot
- Heat
- 6Qt/1.5Gallon
- 110 or 220V
- Aluminum Housing
- This Pressure Pot Features a Heat Controlled Thermostat
- With an Internal Gauge
- Temperatures are Adjustable and a Lock Valve Allows the Airline
to Disconnect From the Pressure Pot
Curing Units
Pressure Pot 2Gal
ECCO - 102524 ECCO-Press Pt w/Heater 2g 110V
US$ 357.75
CFS PRESSURE POT W/ HEATER 1.5 GALLON
* Pressure Pot
*Heat
*6Qt/1.5Gallon
*110 or 220V
*Aluminum Housing
*This Pressure Pot Features a Heat Controlled ThermostatWith an Internal Gauge
*Temperatures are Adjustable and a Lock Valve Allows the Airlineto Disconnect From the Pressure Pot
CFS - 282106 Press Pot w/Heater 2gal 110v
US$ 384.25
CFS PRESSURE POT W/ HEATER 2 GALLON
*Pressure Pot
*Heat
*8Qt/2Gallon
*110V
*Aluminum Housing
*Available in Gas Powered
*This Durable Product is Constructed From Aluminum
*Holds up tp 6 Poured Flasks
Curing Units
Pressure Pot No Heater
ECCO - 102521 ECCO-Press Pot No/Heater 1.5ga
US$ 172.80
ECCO-Pressure Pot with NO HEATER - 6Qt
- Made from aluminum - Holds up to 6 flasks
- Need touse warm to hot water and a compressor when working with this product
- Also available withautomatic air regulator and heater
21/05/2010 / 1284
51
Curing Units
CFS - 279106 Pres Pot No/Heat 1.5gal
US$ 185.60
CFS PRESSURE POT 1.5GALLON
* Pressure Pot 6Quarts
*110V
*Holds Up To 6 Poured Flasks
*Constructed From Aluminum
*Available w/ Automatic Air Regulator and Heater
Curing Units
Washout only units
WASHOUT SINGLE 1 TANK
(Handler)
Washout unit only - Electric or Gas
- Single tank - 110vol
- Dimensions : [18in wide x 14in deph x 12in deep] - [45cm x
35cm x 30cm ] [H# 26104 ]
- Built in 18gauge stainless steel.
Price
+
100870
Code
HANDLER - Washout Single 1 Tank -Gas
Name
US$ 3,544.45
+Info
103528
HANDLER - Washout Single 1 Tank -Electri
US$ 3,544.45
+Info
Curing Units
Curing Unit Parts
ECCO - 102238 Light Meter For LED Lamps
US$ 150.00
Light Meter For light curing LED Lamps replacement part
Dappens
52
21/05/2010 / 1284
Dappens
MIXING CUPS FOR ACRYLICS ( Keystone )
Code
Name
Price
+
US$ 6.30
+Info
KEYSTONE - Silicone Mixing Cups Medium
US$ 7.20
+Info
KEYSTONE - Silicone Mixing Cups Large
US$ 10.80
+Info
101784
ECCO - Non Stick Cup Med 44x31mm each
US$ 3.42
+Info
101783
ECCO - Non Stick Cup Sm 31x 25mm each
US$ 2.47
+Info
5920490
KEYSTONE - Silicone Mixing Cups Sm 2 Pk
5920500
5920510
Die Materials
Die Hardenders
ADS - 102441 Model EEZ - Stone Hardener 1 q
US$ 11.60
- 1quart
- This is a major breakthrough in creating perfect models with all commerically available gypsums
- Conditions the gypsum and produces a low viscosity high-density smooth bubble free mix
- Use this instead of waterto produce models that are smoother - hardener and stronger
- Avoid Broken chipped or cracked models -
Die Materials
Release Agent
CFS - 211106 CFS Mold Release Spray ea
US$ 12.15
Mold Release Spray ea- [C# 211106 ]
ADS - 102442 Plastical Release Agent 4oz
US$ 16.00
Plastical Release Agent - Spray - 4oz Prevents Die Materials from Sticking to all types of Impressions
Die Spacers
Light Cure die spacers
LC DIE SPACERS ( Yeti )
Code
34-1860213
21/05/2010 / 1284
Name
YETI - LC Clear Sp 3mic 10ml
Price
+
US$ 27.04
+Info
53
Die Spacers
34-1860214
YETI - LC Red Sp 10mic 10ml
US$ 27.04
+Info
34-1860215
YETI - LC Blue Sp 10mic 10ml
US$ 27.04
+Info
Die Spacers
Paint on die spacrs
DIE SPACER ( Keystone )
- Fast drying
- Hest resistant
- 1oz bottles
- Provides excellent uniform seating of the restoration
Price
+
034-1028525
Code
KEYSTONE - Silver Die Spacer 1oz Bottle
Name
US$ 15.30
+Info
034-1028523
KEYSTONE - Blue Die Spacer 1oz bottle
US$ 15.30
+Info
034-1028527
KEYSTONE - Thinner Die Spacer 1oz bottle
US$ 15.30
+Info
DIE SPACER KIT ( ADS )
- Creating the exact spacing before wax-up is essential
- Produce controlled relief of dies & consistent film thicknes
- Die Spacer provides excellent uniform seating of the restorations
- Heat resistant
- lies fast
- Easy on your eyes
- One even coat provides approximately 12 microns relief
- Dries in minutes
Kit includes:
- 1 oz Die Spacer
- 1 oz Thinner
Price
+
102404
Code
ADS - Die Spacer Kit - Stand Orange
Name
US$ 12.69
+Info
103076
ADS - Die Spacer Kit - Stand Blue
US$ 12.69
+Info
103077
ADS - Die Spacer Kit - Stand Yellow
US$ 12.69
+Info
103078
ADS - Die Spacer Kit - Stand Red
US$ 12.69
+Info
103079
ADS - Die Spacer Kit - Stand Clear
US$ 12.69
+Info
103080
ADS - Die Spacer Kit - Stand White
US$ 12.69
+Info
103081
ADS - Die Spacer Kit - Stand Creamy
US$ 12.69
+Info
DIE SPACER REFILL ( ADS )
- Die Spacer provides excellent uniform seating of the restorations
- Heat resistant
- lies fast
- Easy on your eyes
- Dries in minutes
- Refill size: 1 quart
Code
102443
54
Name
ADS - Die Spacer Refill Orange 1qt
Price
+
US$ 111.97
+Info
21/05/2010 / 1284
Die Spacers
Paint on die spacrs
103090
ADS - Die Spacer Refill Blue 1qt
US$ 111.97
+Info
103091
ADS - Die Spacer Refill Yellow 1qt
US$ 111.97
+Info
103092
ADS - Die Spacer Refill Red 1qt
US$ 111.97
+Info
103093
ADS - Die Spacer Refill Clear 1qt
US$ 111.97
+Info
103094
ADS - Die Spacer Refill White 1qt
US$ 111.97
+Info
103095
ADS - Die Spacer Refill Creamy 1qt
US$ 111.97
+Info
DIE SPACER THINNER ( ADS )
- Die Spacer provides excellent uniform seating of the restorations- Heat resistant
- lies fast- Easy on your eyes
- Dries in minutes
- Refill size: 4 oz
Price
+
102444
Code
ADS - Die Spacer Thinner Orange 4oz
Name
US$ 11.37
+Info
103082
ADS - Die Spacer Thinner Blue 4oz
US$ 11.37
+Info
103083
ADS - Die Spacer Thinner Yellow 4oz
US$ 11.37
+Info
103084
ADS - Die Spacer Thinner Red 4oz
US$ 11.37
+Info
103085
ADS - Die Spacer Thinner Clear 4oz
US$ 11.37
+Info
103086
ADS - Die Spacer Thinner Creamy 4oz
US$ 11.37
+Info
ADS - 102491 Flash Die Spacer Kit
US$ 14.29
- Flash Die Spacer Kit
- Sliver For controlled relief of all casting and dies
- Provides excellent marginal fit
- Flashspacer goes on evenly and dries in a flash
- May be painted over standard spacer for contrast
- One thin coastprovides approximately 5-6microns thickness
- Also available in gold - Die spacer 1oz flash thinner
KONTACT KIT ( ADS )
- Detect high spots and tight spots when seating castings and articulating.
- Saves time and destructive grinding during adjustments on dies
- Contact dries in seconds and forms a fine, adherent, transfer dye film on polished gold, non-precious
alloys, acrylic resins, inlays and onlays, die materials, cast metal crowns, clasps, porcelain teeth and
crowns, waxes, stones, and attachments
- Will not stain porcelain, contaminate metal, or affect denture resins or teeth
- Provides high-contrast, accurate, crsip markings on die materials, stones, waxes, and metals
- Easy removal with water and a soft bristle brush
Kit includes:
- 1 oz. color indicator
- 1 oz. thinner
Price
+
102405
Code
ADS - Kontact Kit Ind+Thinner Red
Name
US$ 11.31
+Info
103087
ADS - Kontact Kit Ind+Thinner Green
US$ 11.31
+Info
103088
ADS - Kontact Kit Ind+Thinner Blue
US$ 11.31
+Info
103089
ADS - Kontact Kit Ind+Thinner White
US$ 11.31
+Info
YETI - 100718 Yeti Clear Die Spacer 20ml bot
21/05/2010 / 1284
US$ 27.50
55
Die Spacers
Paint on die spacrs
Yeti Clear Die Spacer 20ml bottle - [ Y# 5010001 ] Seals plaster and serves to stimulate the space needed for fixing
cement between the crown and the die - This selection is able to fullfill even the highest demands - [Espaciador
Separador Troquel]
RENFERT - 105085 Pico- Fit Diespace silver 15ml
US$ 16.54
- High quality die spacer varnish with good contrast on the most popular plasters.•
- Flow property individually controlled using the thinner.
- Builds an even layer thickness and a smooth surface.
- Good resistance on plaster models.available in 4 colours.
YETI - 34-1860007 Yeti die spacer Thinner 20ml
US$ 24.00
Yeti die spacer Thinner 20ml
Discs Cutt /Polish& Rouging
0.1 mm Cutting discs
KEYSTONE-034-1300475 Ultra Flex Disc 22x0.15mm 25pk
US$ 15.91
- Ultra - Flex Disc - 7/8in x .006in - 22.2 x 0.15mm - 25/bx
- Silicon carbide - grey - 10000 - 12000 RPM
- Thinnestdisc available - 2/3rds as thin & more flexible than Ultra
- Thin Disc [ P# D132390 DEDECO 5190 ] [ Siliconcarbide discs ]
0.2 mm Cutting Discs
CUTTING DISC 0.2 mm ( All Brands )
Non-contaminating companion to the Discs. Pure fine aluminum oxide abrasive especially formulated for the fine
cutting and finishing of ceramic metals.
Price
+
034-1300460
Code
KEYSTONE - 532 Dura Thin 22x0.25mm 25pk
US$ 8.10
+Info
034-1300470
KEYSTONE - 533 Ultra Thin 22x0.22mm 25pk
US$ 8.10
+Info
ECCO - Ultra thin Disc 22x0.22mm 25pk
US$ 6.25
+Info
1072202
Name
56
21/05/2010 / 1284
CUTTING DISC 0.3 mm ( Keystone )
Non-contaminating companion to the Discs. Pure fine aluminum
oxide abrasive especially formulated for the fine cutting and
finishing of ceramic metals.
Price
+
1072203
Code
ECCO - Very Thin Discs 22x0.30mm 50pk
Name
US$ 6.12
+Info
100683
ECCO - Separating Disc 21x0.30mm 25pk
US$ 7.98
+Info
CUTTING DISC 0.4 mm ( Keystone )
Non-contaminating companion to the Discs. Pure fine aluminum oxide abrasive especially formulated for the
fine cutting and finishing of ceramic metals.
Price
+
034-1300450
Code
KEYSTONE - 531A Veri Thin 22x0.4mm 50pk
Name
US$ 15.91
+Info
034-1300440
KEYSTONE - 531 Veri Thin 19x0.4mm 50pk
US$ 15.91
+Info
Non-contaminating companion to the Discs. Pure fine aluminum oxide abrasive especially formulated for the
fine cutting and finishing of ceramic metals.
Code
1072206
034-1300430
Price
+
ECCO - Cutt off Disc 22x0.6mm 100pk
Name
US$ 9.22
+Info
KEYSTONE - Cutt off Disc 24x0.6mm 100pk
US$ 9.10
+Info
0.7mm Cutting discs
21/05/2010 / 1284
57
0.7mm Cutting discs
Non-contaminating companion to the Discs. Pure fine aluminum oxide abrasive especially
formulated for the fine cutting and finishing of ceramic metals.
Price
+
1073507
Code
ECCO - Cut off wheels 35x0.7mm 100pk
Name
US$ 20.07
+Info
1072507
ECCO - Cutt off Disc 25x0.7mm 100pk
US$ 10.07
+Info
100929
ECCOp - Cut off Disc 35x 0.7mm 100pk
US$ 20.07
+Info
034-1900300
KEYSTONE - Cut off W. Thin 38x0.7mm 100pk
US$ 22.89
+Info
034-1300660
KEYSTONE - Cut off Wheels 25x0.7mm 100pk
US$ 16.20
+Info
034-1300650
KEYSTONE - Cut off Wheels 35x0.7mm 100pk
US$ 27.57
+Info
034-1300170
KEYSTONE - High Speed D. 24x0.7mm 100pk
US$ 8.10
+Info
Non-contaminating companion to the Discs. Pure fine aluminum oxide abrasive
especially formulated for the fine cutting and finishing of ceramic metals
Price
+
1074010
Code
ECCO 1074010 - Cut off wheel 40x1mm 100pk
US$ 23.17
+Info
101210
ECCOp - Cut off wheel 38x1mm 100pk
US$ 23.00
+Info
KEYSTONE - Cut off W. Medium 38x1mm 100pk
US$ 22.89
+Info
034-1900310
Name
1.7 mm Rouging Discs
Non-contaminating companion to the Discs. Pure fine aluminum oxide abrasive
especially formulated for the fine cutting and finishing of ceramic metals
Code
1073517
034-1900320
Price
+
ECCO - Cut off wheel 35x 1.7mm 50pk
Name
US$ 18.00
+Info
KEYSTONE - Cut off W.Thick 39x1.7mm 100pk
US$ 19.37
+Info
58
21/05/2010 / 1284
Non-contaminating companion to the Discs. Pure fine aluminum oxide abrasive especially formulated for
the fine cutting and finishing of ceramic metals
Price
+
1073222
Code
ECCO - Cut off Wheels 32x2.2mm 100pk
Name
US$ 26.27
+Info
100699
ECCO - Cut Off Wheels 33x2.2mm 50pk
US$ 13.00
+Info
034-1300680
KEYSTONE - Roughing Disc 32x2.2mm 50pk
US$ 28.97
+Info
034-1300425
KEYSTONE - Roughing Disc 32x 2.2mm 50pk
US$ 17.10
+Info
3.0 mm Rouging discs
Non-contaminating companion to the Discs. Pure fine aluminum oxide abrasive especially formulated for
the fine cutting and finishing of ceramic metals
Code
1072230
Name
ECCO - Cut off Discs 22x3.0mm 100pk
Price
+
US$ 20.07
+Info
Fibr Glass Reinforced discs
FIBR GLASS REINFORCED DISC ( Keystone )
- Use with special mandrel
- May be used at speed up to 24,000 rpm
- Reinforced with Fiber cutt off disc.
Price
+
034-1300500
Code
KEYSTONE - Econo Cutter 101.6mm ea
Name
US$ 4.50
+Info
034-1300490
KEYSTONE - Econo Cutter 38mm ea
US$ 2.50
+Info
034-1300480
KEYSTONE - Econo Cutter 63.5mm ea
US$ 3.25
+Info
Joe Dandy discs 0.6 mm
21/05/2010 / 1284
59
JOE DANDY DISCS ( Keystone )
- Pure rubber bonded SILICON CARBIDE abrasive in a special binder for fast cool cuting and finishing on.
- Porcelain, acrylic, gold, alloys and other materials
- .023in [0.6mm] Thickness
- Single and double faced
- 100 per box
Price
+
034-1300180
Code
KEYSTONE - Flat Double Cut 13x0.6mm 100pk
Name
US$ 10.20
+Info
034-1300190
US$ 10.20
+Info
034-1300200
US$ 10.20
+Info
034-1300210
US$ 10.20
+Info
034-1300220
US$ 10.20
+Info
034-1300230
KEYSTONE - Flat Safe Side 13x0.6mm 100pk
US$ 10.20
+Info
034-1300240
US$ 10.20
+Info
034-1300250
KEYSTONE - Flat Safe Side 19x0.6mm 100p
US$ 10.20
+Info
034-1300260
US$ 10.20
+Info
034-1300270
US$ 10.20
+Info
034-1300290
KEYSTONE - Cup Double Cut 16x0.6mm 100pk
US$ 15.00
+Info
034-1300300
US$ 15.00
+Info
034-1300310
US$ 15.00
+Info
034-1300320
US$ 15.00
+Info
Discs Diamond
Double sided
KEYSTONE-034-1290705 Al-Flex Diam 0.20x22mm
US$ 22.59
Diamond Discs - Al - Flex - Full Cover - 0.20mm x 7/8in - 22mm - diameter - for use with ceramic - plaster and acrylic veneers double sided - K# 1290705 - [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized business in Dental lab
equipment & Dental Porcelain Furnaces ]
KESYTONE - 1290810 Cut Flex Diam 0.35x 22mm Coars
US$ 16.60
Titanium Coated Diamond disc Cut flex coarse - 0.014in [0.35mm] x 22mm diam double sided - For cutting ceramics and acrylics
and can be used for heavier cutting - - [1290811 double pack] [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is
specialized business in Dental lab equipment & Dental Porcelain Furnaces ]
KESYTONE - 1290790 Cut Flex Diam. 0.18x 22mm Fine
US$ 16.60
Titanium Coated Diamond disc Cut flex fine - 0.007in [0.18mm] x 22mm diam double sided - - Used for separating ceramics and
acrylics - [1290791 double pack] [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized business in
Dental lab equipment & Dental Porcelain Furnaces ]
KEYSTONE-034-1290710 Koolflex Diam Disc 0.17x22mm
US$ 22.59
Diamond Discs - Kool - Flex - 0.17mm x 7/8in - 22mm - diameter - for use with ceramics & composites - 5 - 10000 rpm - double sided
- K# 1290710 - [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized business in Dental lab equipment &
Dental Porcelain Furnaces ]
KEYSTONE-034-1290695 Miniflex Diam Disc 0.10x22mm
US$ 16.82
Diamond Discs - Mini - Flex - 0.10mm x 7/8in - 22mm - diameter - for use with ceramics - composites and acrylics - 5 - 10000 rpm double sided - K# 1290695 - Discos Diamante Corte Flexibles -- [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is
60
21/05/2010 / 1284
Discs Diamond
Double sided
KEYSTONE-034-1290715 Multiflex Diam Disc 0.17x22mm
US$ 23.57
Diamond Discs - Multi - Flex - 0.17mm x 7/8in - 22mm - diameter - for use with ceramics- composites and acrylics - 10 - 20000 rpm double sided - K# 1290715 - Discos Diamante Corte Flexibles -- [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is
KESYTONE - 1290775 Sep Flex Diam 0.18x 22mm Fine
US$ 16.60
Titanium Coated Diamond disc Sep-flex Fine - 0.007in [0.18mm] x 22mm diam double sided - Used for separating and contouring
of metals and ceramics and acrylics - - [1290776 double pack] [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is
KESYTONE - 1290815 Sep Flex Diam 0.18x 22mm Coars
US$ 16.60
Titanium Coated Diamond disc Sep flex Coarse- 0.007in [0.18mm] x 22mm diam double sided - Used for separating and
contouring of ceramics - metal and acrylics - [ K# 1290815 ] [K# 1290816 double pack] [ Keystone Abrasives - Keystone Dental
Tools ][ Us Dental Depot is specialized business in Dental lab equipment & Dental Porcelain Furnaces ]
KESYTONE - 1290825 Super Flex Diam 0.35x 22mm Coa
US$ 17.50
Titanium Coated Diamond disc Super flex Coarse - 0.014in [0.35mm] x 22mm diam double sided - Very thin and flexible - Used
for light contouring and working in interproximal slots - Not for cutting - [1290826 double pack] [ Keystone Abrasives - Keystone
Dental Tools ][ Us Dental Depot is specialized business in Dental lab equipment & Dental Porcelain Furnaces ]
KEYSTONE-034-1290700 Ultraflex Diam Disc 0.20x22mm
US$ 15.91
Diamond Discs - Ultra - Flex - 0.20mm x 7/8in - 22mm - diameter - for use with ceramics - 10 - 20000 rpm - double sided - K#
1290700 - Discos Corte Flexibles -- [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized business in
Discs Diamond
Plaster diamond discs
PLASTER DIAMON DISCS (All Brands)
- Used for cutting Plaster, Ceramics and Acrylics.
- Sold by each one.
Code
Price
+
KESYTONE - Titanium Coated Diamond disc Super Plaster - 0.014in ...
US$ 18.00
+Info
100767
ECCO - ECCO Diam. disc Super Plaster - 0.30mm ( 45mm diam ) double sided narrow - F...
US$ 13.05
+Info
101884
ECCO - ECCO Diam. disc Super Plaster - 0.20mm ( 40mm diam ) double sided narrow - F...
US$ 8.00
+Info
34-1290805
Name
Discs Diamond
Single sided
KESYTONE - 1290780 Sep Flex Diam. 0.15x 22mm Fine
US$ 16.60
Titanium Coated Diamond disc Sep flex Fine - 0.006in [0.15mm] x 22mm diam single sided - Used for separating and contouring
of ceramics - metal and acrylics - [1290781 double pack] [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is
21/05/2010 / 1284
61
Discs Diamond
Single sided
KEYSTONE-034-1290690 Ultraflex Diam Disc 0.17x22mm
US$ 14.87
Diamond Discs - Ultra Flex - 0.17mm -7/8in [ 22mm ] diameter . - for use with ceramics and composites (5-10000 rpm) - Single sided
[K# 1290690 ] Discos Corte Flexibles --- [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized business in
Discs Diamond
Sintered diamond discs
ECCO - 101082 Sintered Diamond Disc #113x
US$ 33.00
Sintered Diamond Disc #113x [ T75-0030 ] diamante Sinterisado
Discs Diamond
Unmount Perforated Diam discs
UNMOUNTED PERFORATED DIAM
DISC ( All Brands )
- Diamond discs are made of either stainless steel or brass
or nickel silver.
- Their working portions are coated with crushed natural
diamond powder having one of four sizes of the grain that is
bonded electrochemically.
- The discs possess high grinding ability, have higher
strength and wear resistance and strong bonding.
Price
+
10906
Code
ECCO - Unmounted Perforated Diamond Disc Double Perforated #6 - ( 0.30x22mm ) ( 0.011in...
Name
US$ 4.57
+Info
10907
ECCO - Unmounted Perforated Diamond Disc Flex Double Saw #7 - ( 0.17x22mm ) ( 0.006in x...
US$ 5.42
+Info
10908
ECCO - Unmounted Perforated Diamond Disc Flex Double Slant Slot #8 - ( 0.17x22mm ) ( 0...
US$ 5.42
+Info
10909
ECCO - Unmounted Perforated Diamond Disc Flex Double 24 Slot #9 - ( 0.17x22mm ) ( 0.006...
US$ 5.42
+Info
10910
ECCO - Unmounted Perforated Diamond Disc Flex Double 16 Slot #10 - ( 0.27x22mm ) - ( 0...
US$ 5.42
+Info
Discs Diamond
Unmounted Diam Discs
UNMOUNTED DIAM DISCS ( Ecco )
- Diamond discs are made of either stainless steel or brass
or nickel silver.
- Their working portions are coated with crushed natural
diamond powder having one of four sizes of the grain that is
bonded electrochemically.
- The discs possess high grinding ability, have higher
strength and wear resistance and strong bonding.
Code
62
Price
+
10901
ECCO - Unmounted Diamond Disc Flex Single Sided #1 - ( 0.13x22mm ) ( 0.005in x 0.008in ...
Name
US$ 4.57
+Info
10902
ECCO - Unmounted Diamond Disc Flex Double Full Face #2 - ( 0.15x22mm ) ( 0.005 x 0.008i...
US$ 4.57
+Info
21/05/2010 / 1284
Discs Diamond
10903
ECCO - Unmounted Diamond Disc Flex Double Edge #3 - ( 0.20x22mm ) ( 0.007in x 0.008in ...
US$ 4.57
+Info
10904
ECCO - Unmounted Diamond Disc Double Full Face #4 - ( 0.25x22mm ) ( 0.009in x 0.008in )...
US$ 4.57
+Info
10905
ECCO - Unmounted Diamond Disc Double Full Face #5 - ( 0.30x22mm ) ( 0.011in x 0.008in ...
US$ 4.57
+Info
Discs Diamond
Ventilated - Perforated
KESYTONE - 1290820 Contour Diam 0.35x 22mm Coarse
US$ 16.60
Titanium Coated Diamond disc Contour perforated Coarse - 0.014in [0.35mm] x 22mm diam double sided - For plaster ceramics
and acrylics - For ceramics and acrylics [1290821 double pack] [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is
KESYTONE - 1290800 Contour Diam. 0.35x 22mm Fine
US$ 16.60
Titanium Coated Diamond disc Contour perforated Fine - 0.014in [0.35mm] x 22mm diam double sided - For plaster ceramics
and acrylics - For ceramics and acrylics (1290801 double pack) [ Keystone Abrasives - Keystone Dental Tools ]v
KESYTONE - 1290795 Top Flex Diam 0.18x 22mm Fine
US$ 16.60
Titanium Coated Diamond disc Top flex Perforated Fine - 0.007in [0.18mm] x 22mm diam double sided - Used for contouring
ceramics - For ceramics and acrylics [1290796 double pack] [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is
Dowel Pins
Aluminum Dowel pins
ECCO - 100447 Dowel Pin Med Alum 1000pk
US$ 14.00
ECCO Dowel Pins Medium #2 Aluminum - 1000pack - ( LMM306 ) - Compatible with reguilar pindex dri ll -m
Dimensions: 23mm length - 18mm taper - 5mm head -
ECCO - 100447-1 Dowel Pin Med Alum 100pk
US$ 3.80
ECCO Dowel Pins Medium #2 Aluminum - 100pack - ( LMM306 ) - Compatible with reguilar pindex dri ll -m Dimensions: 23mm length - 18mm
taper - 5mm head -
Dowel Pins
Brass dowel pins ( bronze )
ECCO - 100026 Dowel Pin Med Brass #2 1000pk
US$ 19.00
Dowel Pins Medium Brass -#2 - 1000pk - ( Pindex medium regular size ) Dimensions: 23mm length - 18mm
taper - 5mm head - Shipping weight: 2lb [permanente] [oferta] [ bronce dorados ]
21/05/2010 / 1284
63
Dowel Pins
ECCO - 100026-1 Dowel Pin Med Brass #2 100pk
US$ 4.00
Dowel Pins Medium Brass -#2 - 100pk - ( Pindex medium regular size ) Dimensions: 23mm length - 18mm taper - 5mm head - [permanente]
[oferta] [ bronce dorados ]
Dowel Pins
Ceramic & Zirconia pins
ECCO- 101259 Dowel Pin Ceramic 10pk
US$ 36.00
ECCO Dowel Pins Ceramic - 10pk - Ideal for Alumina and Zirconia sinterization - Re-usable hundreds of times Dowel pin zirconia para sinterizado - reusables muchas veces - [J# T-047 ]
Dowel Pins
Double Dowel Pins
ECCO -100397 D-Dowel Pin Plast 1000pk
US$ 23.00
ECCO Double Dowel Pins Plastic - Yellow - Plastic Pins and Sleeves - Simil Pindex System -1000pk Dowel Pin
Vaina Plastica px1 ]
SELECT - 4001998 Dual-Pin w/Sl 1000pk
US$ 120.35
Originial Dual Dowel Pins & Sleeve - pins and sleeves - 1000pk [S# 4001998 ] Compatible with virtually all pin setting systems very economical - precise fitting metal pin & metal sleeve with improved retention - DIe guards for clean professional models replaces PX114 -PX115 - PX153 - P-48 pin mates & denerica 346 & 326 - double dowel pin
SELECT - 4001998-1 Dual-Pin w/Sleeve 100pk
US$ 24.90
Originial Dual Dowel Pins & Sleeve - pins and sleeves - 100pk [S# 4001998 ] Compatible with virtually all pin setting systems - very economical precise fitting metal pin & metal sleeve with improved retention - DIe guards for clean professional models - replaces PX114 -PX115 - PX153 P-48 pin mates & denerica 346 & 326 - double dowel pin
ECCO - 101720 Master Pin w/sleeve 1000pk
US$ 74.40
Master Pins - Double/ Twin Metal Dowel Pins - with plastic sleeves and rubber caps - 1000pk - [M# 402 ] -State
of the art twin pins with die guards - added stability which elminates roatation - extremely precise - no distortion easliy used with pindex machines -
ECCO - 101720-1 Master Pin w/sleeve 100pk
US$ 13.00
Master Pins - Double/ Twin Metal Dowel Pins - with plastic sleeves and rubber caps - 100pk - [M# 402 ] -State of the art twin pins with die guards added stability which elminates roatation - extremely precise - no distortion - easliy used with pindex machines -
ECCO - 100032-1 Mr.Pin double dowel pin 100pk
US$ 13.00
ECCO Mr Pin Double Dowel Pins with Sleeves/Metalica - 100pk- [permanente] [oferta] MM325 doble vaina (GDDP)
64
21/05/2010 / 1284
Dowel Pins
Double Dowel Pins
ECCO - 100032 Mr.Pin Double dowel Pin 1000pk
US$ 68.00
ECCO Mr Pin Double Dowel Pins with Sleeves/Metalica - 1000pk- [permanente] [oferta] MM325 doble vaina
(GDDP)
ECCO - PX114 PX114 Pin w/slv Lng Pink1000pk
US$ 54.00
PX114 Double Dowel Pins Long with Plastic Sleeves - Pink - -simil PX114- - 1000pk - Pindex System - Dowel
Pins Vaina Plastica Simple double )((Rosa)
ECCO - PX114-1 PX114 Pin w/slv Lng Pink100pk
US$ 12.00
PX114 Double Dowel Pins Long with Plastic Sleeves - Pink 100pk - Pindex System - -simil PX114- (Dowel Pins Vaina Plastica Simple double
)((Rosa)
ECCO - 100629 PX114-B Pin w/slv Lng 1000pk
US$ 35.00
PX114-B Double Dowel Pins Long with Plastic Sleeves - White - ( simil PX114) - 1000pk - Dowel Pins Vaina
Plastica Simple double )( (Blancos) [ Pindex Dowel Pin Doble Plastic vaina ]
ECCO - PX115 PX115 Pin w/slv Shrt Bl 1000pk
US$ 54.00
PX115 Double Dowel Pins Short with Plastic Sleeves - Blue -simil PX115- - 1000pk - Pindex System - (
Pearson p231400) Dowel Pins Vaina Plastica Simple double )( Azul
ECCO - PX115-1 PX115 Pin w/slv Shrt Bl 100pk
US$ 12.00
PX115 Double Dowel Pins Short with Plastic Sleeves - Blue -simil PX115- - 100pk - Pindex System - ( Pearson p231400) Dowel
Pins Vaina Plastica Simple double )( Azul
Dowel Pins
Mainstay Dowel Pins
ECCO - 101549 Pin Mainstay Type C 1000pk
US$ 75.00
Dowel Pin Mainstay Type C - with plastic red crossed sleeve - Simil original Whip-mix - 1000pk [ S# 400-1980 ]
21/05/2010 / 1284
65
Dowel Pins
Reverse Dowel Pins
Dowel Pins
Reverse Dowel Pins
ECCO - 100257 Reverse Dowel Pin 1000pk
US$ 15.00
ECCO Reverse Plastic Dowel Pins - Red 1000pk - ( Pearson - n30-07-53 blue )
KEYSTONE-034-1310070 Reverse Dowel Pin 1000pk
US$ 20.06
Reverse Dowel Pins - red -plastic - tapered - 1000pk - Economical plastic stablizing pin - the RD pins are tapered to insure fir with
most drills - used when removing die is required
Duplicating Dispensers
Duplicating Dispen 10Gal
CFS - 285106 Duplic. Dispen. 10gal 110/220v
US$ 5,285.25
DUPLICATING DISPENSER 10 GALLON
*10 Gallon
*110/220V
*12 Hour Timer
*This Fully Automatic Dispenser Melts, Conditions, and Returns
Material to Ideal Temperature for Immediate Use
ECCO -102519 ECCO-Dup. Dispenser 10gal 110V
US$ 4,920.75
- 10 gallon
- 110V
- 12 hour timer
- Automatic
- Conditions
- Melts
- Returns material to ideal temperature for immediate use
- Very economical dispenser
66
21/05/2010 / 1284
US$ 1,732.75
- 2 Gallon
- 110/220V
- 12 Hour Timer
- Dimensions: 16 x 14 x 24inches
- Weight: 18lbs
- This Fully Automatic Dispenser Mets, Conditions, and Returns
ECCO - 102515 ECCO-Dup. Dispenser 2gal 110V
US$ 1,613.25
- 2 gallon
- 110V
- 12hr timer
- Autiomatic
- Conditions
- Melts
- Returns material to ideal temperature for immediate use
- Shipping information: 16x14x24
- Weight: 18lbs
US$ 2,066.25
DUPLICATING DISPENSER 3 GALLON
*3 Gallon
*110/220V
*12 Hour Timer
*This Fully Automatic Dispener Mets, Conditions, and Returns
ECCO - 102517 ECCO-Dup. Dispenser 3gal 110V
US$ 1,923.75
- 3 gallon
- 110V
- 12 hour timer
- Autpmatic
- Conditions
- Melts
- Returns amterial to ideal temperature for immediate use
- Very economical dispener
21/05/2010 / 1284
67
Duplicating Material
4 Ethyl-Silicate investments
NOBILIUM - N-1009 Nobilflex Dup Coll. 3.5 gal
US$ 134.00
Nobiflex Duplicating Colloid 3.5gal Only for Ethyl-silicate investments - [3.5gal - 31 lb net wgt] - Special formulation for colloid
coating technique - Use with ethyl silicate investments -
NOBILIUM - N-1003 Nobiloid Reg Dup Mat 1 gal
US$ 43.00
Nobiloid Reg. Duplic. Mat.- 1gal -Only for ethyl-silicate investments -[ 9 lb (4.1 kg ) -] [ Regular Duplicating Material with special
formulation ]
All purpose Duplicating Mat.
CFS - 236106 CFS Dup. Mat. All Purp 1gal
US$ 22.00
CFS Duplicating Material - All purpose - Gel -1 gal - a highly regarderd secret- [C# 236106 ] [ Duplicating material ]
DUPLICATE MATERIAL ( Nobilium )
Price
+
N-1001
Code
NOBILIUM - NOBILIUM Nobiloid Duplicating material - All purpose - 1 gal - (3.79 ltr) - 9 l...
Name
US$ 43.00
+Info
N-1002
NOBILIUM - NOBILIUM Nibiloid Duplicating Material - All purpose - 3.5gal - (13.3 ltr) - 31...
US$ 131.00
+Info
ECCO - 102155 ECCO Dup. Mat.All Prp Pow 1gal
US$ 18.00
- ECCO Duplicating Material
- All Purpose Powder
- 1 gallon for preparation
- A highly regarderd secret
- Last many times
Instructions:
- Just add hot water (90 C) ansd is ready to use
- Mix powder with a quarter of cold water with a blender for 45 seconds
- Then add the other 3 quarters and heat to 90 C
KEYSTONE-034-1310300 KEYST Dup. Mat. All Purp 1gal
US$ 48.60
KEYSTONE Duplicating Material - All Purpose - 1 Gal - Dual - Gypsum and Investment -[]( Gel reproduccionn ) [ Keystone Abrasives Keystone Dental Tools ][ Us Dental Depot is specialized business in Dental lab equipment & Dental Porcelain Furnaces ]
Conditioners
68
21/05/2010 / 1284
Conditioners
NOBILIUM-NOB-1010 Colloid Conditioner 2lb
US$ 17.00
Nobilwash Colloid Conditioner [conditions wash to prepare nobilflex for stone model use] [1qt (946 cc) - 2lb (.91 kg) net wgt]
Lab Putty
NOBILIUM-NOB-7437 Insta=-mold Curing Agent only
US$ 14.00
Insta-mold elastomeric material [silicone impression putty for matrix workrepairs and precise posotioning ] [ curing agent only 1fl oz
(29.6 cc)
NOBILIUM-NOB-7436 Silicone impression Kit 964cc
US$ 60.00
Insta-mold elastomeric material kit 32fl oz (964 cc)putty &1ft oz (29.6 cc) curing agent [ silicone impression putty for matrix workrepairs and precise positioning ]
Silicone 4 duplicating
SILICONE 4 DUPLICATION ( Nobilium )
Free-Flowing Tear-Resistant Non-Shrinking
Free-flowing with excellent consistency, this quality material captures even the smallest of details withease. extremely tear-resistant and
non-shrinking. CMP?sduplication silicone is specially formulated to provide total accurate control.
Price
+
N-7433
Code
NOBILIUM - Duplication silicone [1 kg (2.2 lb) brown base]
Name
US$ 48.00
+Info
N-7434
NOBILIUM - Duplication silicone [1 kg (2.2 lb) white catalyst]
US$ 48.00
+Info
N-7435
NOBILIUM - Duplication silicone 2kg pk - 1 kg brown base and 1Kg white catalyst ...
US$ 90.00
+Info
Dust Collectors
1 Station Dust Collectors
HANDLER -103481 #66A Under Bench Porta Vac
US$ 440.02
*66A Under Bench PORTA-VAC
An under bench single position dust collector for use in collecting dry grinding and polishing dusts from lathe or
handpiece operations.
*Suction capacity of 150 CFM (cubic feet/minute) [71m3/min.]
Shipped complete with:
*83WL splash hood
* 3 1/2 feet of 3 [7.6cm] flexhose
*An under bench canister with suction unit mounted on top
* Not for wet dust or heavy grinding operations, eg. ALO.
* Shipped complete ready for set up under the bench with table top splash hood.
*May be shipped with a bench top fishmouth in lieu of a splash hood.
Technical specifications:
Shipping Wgt.: 23 lbs [10.4 Kg]
*(shipped in two cartons)
*Unit Dimensions:
*Bench Hood - 6 wide x 10 deep x 12 high[15cm x 25cm x 30cm] (WITH LIGHT)
*Canister - 10 wide x 6 deep x 22 high [25cm x 15cm x 56cm]
*Model: 66A
21/05/2010 / 1284
69
Dust Collectors
HANDLER - 103488 #76D0 Bench Top
US$ 402.36
*76D-0 Bench Top Dust Collector
*A bench top polishing unit designed to provide 365 CFM (cubic feet/minute) [172m3/min.]
*Suction intake through two frontal suction inlets
*Constructed of heavy gauge sheet steel
*Finished in a durable, baked coating.
*Two 10 x 12 x 2 [25cm x 30cm x 5cm] (480 cubic inches) [7.9m3] reversible and replaceable filters entrap
dusts as small as 5 microns and larger
*Shipped complete ready for use with your lathe
* or it may be purchased with a No. 26A Red Wing Polishing Motor (SEE 76D3)
*Two aluminum pumice/polishing pans are provided to hold wet pumice and dry grindings
*This unit is NOT recommended for use with gypsum dust or ALO.
Technical specifiactions:
* Unit Dimensions: 29 wide x 20 1/2 deep x 13 high [74cm x 52cm x 33cm]
*Model: 76D-0
HANDLER - 103489 #76D3 Bench Top w/Lathe
US$ 620.00
#76D3 Bench Top Dust Collector with Lathe [H# 76D-3] Shipping 29x20-1/2x13in Weight 93lb*76D-3 Bench Top
Dust Collector with #26A polishing motor
*A bench top polishing unit designed to provide 365 CFM (cubic feet/minute) [172m3/min.]
*Suction intake through two frontal suction inlets
*Constructed of heavy gauge sheet steel
*Two 10 x 12 x 2 [25cm x 30cm x 5cm] (480 cubic inches) [7.9m3] reversible and replaceable filters entrap
dusts as small as 5 microns and larger
Shipped complete ready with:
*#26A polishing motor
*Two aluminum pumice/polishing pans are provided to hold wet pumice and dry grindings
*This unit is NOT recommended for use with gypsum dust or ALO.
Technical specifiactions:
*Shipping Wgt.: 54 lbs [24.5 Kg]
*Unit Dimensions: 29 wide x 20 1/2 deep x 13 high [74cm x 52cm x 33cm]
*Model: 76D-3
HANDLER - 103422 62-II Super Sucker 1stat 110v
US$ 500.02
*62-II SUPER SUCKER:
*Designed to provide excellent suction to a single bench top work position.
*110 CFM ( cubic feet / minute)
*At a static pressure of 63" of H20 and is one of the most powerful single station dust collectors available.
*Designed for continuous duty, the double walled disposable filter bag is easily removed through the front access
door with the removal of two thumb screws.
*A rear internal activated charcoal filter aids in the removal of acrylic monomer odors.
*The 62-II Super Sucker is shipped complete with:
* the dust collector with variable speed controlled suction motor,
*4 feet if 2-1/2" flex hose
*A fishmouth
*A 6" resin splash hood may be order in lieu of the fishmouth.
* This unit is not recommended for collection of ALO dusts.
Technical Specifcations:
*Shipping Weight: 35 lbs (16 Kg)
*Unit Dimensions: 10" wide x 15-1/2" deep x 13" high [ 25cm x 39cm x 35.5cm]
*Model: 62-II
70
21/05/2010 / 1284
Dust Collectors
HANDLER - 103467 62-IIUV Super Sucker 1stat
US$ 685.02
62-IIUV NEW SUPER SUCKER WITH UV BULB
*Designed to provide excellent suction to a single bench top work position.
*110 CFM ( cubic feet / minute)
*At a static pressure of 63
" of H20 and is one of the most powerful single station dust collectors available.
*Designed for continuous duty, the double walled disposable filter bag is easily removed through the front access
door with the removal of two thumb screws.
*A rear internal activated charcoal filter aids in the removal of acrylic monomer odors.
*The 62-II Super Sucker is shipped complete with:
* the dust collector with variable speed controlled suction motor,
*4 feet if 2-1/2" flex hose
*A fishmouth
*A 6" resin splash hood may be order in lieu of the fishmouth.
* This unit is not recommended for collection of ALO dusts.
Technical Specifcations:
*Shipping Weight: 35 lbs (16 Kg)
*Unit Dimensions: 10" wide x 15-1/2" deep x 13" high [ 25cm x 39cm x 35.5cm]
*Model: 62-IIUV
DEMCO-106-D1 D-1 Dust Collector 110v 1stat
US$ 520.83
- Completely Portable - transport wherever the job is located.
- Use in either horizontal or vertical position.
- Powerful 10 AMP.
- Reusable Cloth Filter Bag.
Specifications
Eletrical: 115V/60Hz Height: 8 1/2' (21.6 cm) Width: 15 5/8' (39.7 cm)
Depth: 11 3/4'(29.8cm) Shipping Wt: 34lb (15.4 Kg)
ECCO - 101721 Dust Collector 1/3hp 110v 1sta
US$ 265.00
ECCO-Dust Collector
-1/3Hp suction motor -Metal case and speed control for noise reduction.
- Bag collection system - [ # DC 65 ] 1.5in conection - 3feet hose - 110vol.
- Includes two dust bags.
VANIMAN - 103472 SandVac w/Acm &Ft Remote 1stat
US$ 654.87
*SandVac with Accumulator and Foot Remote
*Powerful suction
*Quiet operation (55dbA)
*Compact, space saving design
*Dual function remote control included
*Accumulator pre-filter captures 95% of all dust and 99% of all abrasive media
*Plug in your micro-abrasive blaster and control both with one easy step
*2 Year Warranty
*110V
*5.00Amps
*Shipping Dimensions: 25 x 20 x 18in
*Weight: 43lbs
*Hose 2-1/2 espandable to 6in
21/05/2010 / 1284
71
Dust Collectors
VANIMAN - 103473 StoneVac II 1 Station
US$ 875.74
*StoneVac II
*1 Station
*Specifically designed for Die Stone use, Micro-abrasive Blasters, Porcelain and all other Dry Material
*Exclusive built-in electric filter cleaning system
*Handles all dust with true HEPA filtration - captures 99.97% of dust at 0.3 microns
*Bagless design
*Can be configured as a two station system
*New Ultra-Quiet design
*High capacity motor outperforms all conventional dust collectors
*1 Year Warranty
Technical specifcations:
*110V
*12.00Amps
*Weight 53lb
*Hose: 2-1/2 expandable to 6in
VANIMAN - 103475 StoneVac II Brushless 1 Stat
US$ 1,383.20
*StoneVac II Brushless
*1 station
*Brushless Motor
*Bagless design
*Can be configured as a two station system
*1 Year Warranty
*110V
15Amps
*Weight: 53lb
Hose 2-1/2 expandable 6in
VANIMAN - 103474 StoneVac II Plus w/micr 1 Stat
US$ 1,079.32
*StoneVac II Plus with Micromotor Control
*1 station
*Auto Pilot for handpiece control
*Bagless design Can be configured as a two station system
*1 Year Warranty
Technical Specifications:
*110V
9.00Amps
*Shipping Dimensions 20 x 15 x 24.50in
*Weight: 53 lb
*Hose: 2-1/2 expands to 6in
72
21/05/2010 / 1284
Dust Collectors
VANIMAN -101008 Vang Plat 2x w/ Acm 1 stat
US$ 935.00
Vanguard Platinum 2x Dust Collector with accumulator for 1 station [ 21/2 hose expands to 6 - handle up to
two stations - Ultra low maintenance design - ] [ #V120132 ] [ #10331 ] idem #10331 ( single station ) [ Alto
poder - motor silencioso - ultra bajo mantenimiento ] [ aspiradora ] dust*Vanguard Platinum 2X Dust
Collector with Accumulator
*1 Stations
*High speed turbine technology producing high suction
*Accumulator pre-filter captures 95% of all dust
*Whisper quiet operation at 55 dbA
*Autopilot for handpiece synchronization
*Optional Air Autopilot for air handpiece control
*Tri-filtration built-in
*1Year Warranty
*110V
*15.00Amps
*Weight: 48lb
*Hose:2-1/2in expands to 6in
VANIMAN -101006 Vanguard 1x w/o Acm 1 stat
US$ 592.30
*Vanguard 1X Dust Collector without Accumulator
*1 Station
*Low maintenance design
*Optional additional HEPA and Odor Filtration
*1Year Warranty
*110V
*5.00Amps
*Weight: 35lb
*Hose: 1-1/2 x 4in
VANIMAN - 103468 Vanguard 1X with Accum 1 Stat
US$ 708.89
*Vanguard 1X Dust Collector wth Accumulator
*1 Station
*1Year Warranty
*110V
*5.00Amps
*Weight: 35lb
*Hose: 1-1/2 x 4in
21/05/2010 / 1284
73
Dust Collectors
VANIMAN - 103469 Vanguard Gld 2x w/Acm 1/2 stat
US$ 785.25
*Vanguard Gold 2X Dust Collector with Accumulator
*1 or 2 Stations
*1Year Warranty
*110V
*10.00Amps
*Weight: 48lb
VANIMAN - 101005 Vanguard Gld x2 w/o Acm 1stat
US$ 693.00
*Vanguard Gold 2X Dust Collector without Accumulator
*1 Station
*1Year Warranty
*110V
*10.00Amps
*Weight: 36lb
Dust Collectors
2 Station Dust collectors
HANDLER - 100735 62 Super Sucker 2stat
110vol
US$ 626.22
#62 Super Sucker
*Designed to provide maximum suction capacity
*225 cfm (6.36M3/min) suction capacity through two top inlets
*Dust and grindings are entrapped in a removable disposable paper filter
* secondary polyester filter entraps finer dusts
* third filter made of activated charcoal removes up to 80% of acrylic
monomer odors.
Shipped complete with
*Two 87210 fishmouths
*Two four foot sections of 3 (7.6cm) flexihose
*Four clamps
*This unit is an excellent addition to the smaller laboratory
*Which is collecting dusts sporadically.
Techincal specifications:
*Unit Dimensions: 14 3/4 wide x 8 1/2" deep x 17 3/8 high [37cm x 22cm x
44cm]
*Model: 62
74
21/05/2010 / 1284
Dust Collectors
HANDLER - 103400 Dust Collector 2stat 110vol
US$ 641.75
*60U Dust Dollector 2 stations
*suction to two 3 [7.6cm] work positions simultaneously
*Powered by a ball bearing
*capacitor start
*industrially rated suction moto
*Suction capacity of 400 CFM (cubic feet/minute) [189m3/min.]
*200 CFM [94m3/min.]
*through each of two 3 [7.6cm] suction inlets provided
*Dust and grindings are cleaned from the air intakes by 14 shakeable cloth filter bags which
effectively entrap 0.5 micron particles and larger.
*Manufactured to fit under existing work benches or new installations
*Its compact size delivers central system suction power
*Suction - 400 CFM (cubic feet/minute) [189m3/min.]
*Through two inlets provided.
*Filter Area - 14 shakeable filter bags
*16 sq. ft. filter area
*Cleaning - External foot shaker, internal dust tray.
*Unit Dimensions: 16 wide x 14 deep x 22 high [41cm x 36cm x 56cm]
*Available with polyester bags for use with aluminum oxide, at additional cost.
*Note: with 2-Fishmout 2-4 Pc Hose
*Model: 60U-D
QUATRO-100566 Jet-Stream dust 2stations 110v
US$ 645.00
Jet-Stream dust collector compact serie ( 2 stations ) 110 volts
- 1.5in diam inlet collection ports -2x4 feet of heavy dutty hose [ vacuum aspirador ] health smart anti-microbial
deluxe filter bag.
- Electrostatic action that collects dust like a magnet and is suitable for all materials includingabrasives two
stations with simultaneous use and has ultra quiet efficient performance.
- Shipping Inforrmation [ 257mm wide x308mm high x362mm deap ] dust.
VANIMAN - 101009 Vang Plat 2x w/ Acm 2 Stat
US$ 953.84
*Vanguard Platinum 2X Dust Collector with Accumulator
*2 Stations
*Accumulator pre-filter captures 95% of all dust
*Automatic Bag Full indicator
*1Year Warranty
*110V
*15.00Amps
*Weight: 48lb
*Hose:2-1/2in x 4in
21/05/2010 / 1284
75
Dust Collectors
VANIMAN -101007 Vang Plat 2x w/o Acm 2 stat
US$ 844.00
Vanguard Platinum 2X Dust Collector with out Accumulator
*2 Stations
*1Year Warranty
*110V
*10.00Amps
*Weight: 35lb
VANIMAN - 101004 Vanguard Gld x2 w/ Acm 2stat
US$ 802.90
Vanguard Gold 2X Dust Collector with Accumulator
*2 Stations
*1Year Warranty
*110V
*10.00Amps
*Weight: 48lb
*Hose:2-1/2in x 4in
VANIMAN - 101003 Vanguard Gld x2 w/o Acm 2 stat
US$ 728.00
*Vanguard Gold 2X Dust Collector without Accumulator
*2 Station
*1Year Warranty
*110V
*10.00Amps
*Weight: 36lb
*Hose:2-2-1/2 x 4in with tee
Dust Collectors
Brushless Dust collectors
76
21/05/2010 / 1284
Dust Collectors
QUATRO - 101359 Velocity x4 4 stat 110v
2.5in
US$ 1,266.32
Velocity x4 Dust collector (4 dedicated ports - simultaneous use)
- 2.5inch diam. heavy dutyhose x 6 feet long x each port
- Dust collectors - [ W# X4-25S ] Features powerful motorblower system, maintence
friendly design filter cleaning in seconds and a quick and easyslide out tray for
recovery of precious metals
- Airflow - 800cfm - Weight - 120 lbs -Dimensions - 23 x 18 x 25.5 inches
- Dust CollectorsDust Collector Air Purifier
Dust Collectors
Dust Collector Air Purifier
QUATRO - 101357 AF1000 Fresh Air Purifier
US$ 1,623.00
AF1000 Fresh- Air Purifier - for airborne dust - [J# AF1000D ] - Purificador de aire - AF1000 models are
suggested for up to approx. 500-600 sq ft or 47- 56 sq meters - Height - 52 inches [1321mm] Width -22
inches [559mm]- Depth - 16 inches [406mm]- Weight - 200lbs [91kgs] -120V - Watts 200 - Re- circulation
reduces air conditioning costs - Portable and easy to install - Creates a healthy work enviroment -
VANIMAN - 103478 Fume Hood Bench Top Stnd 18in
US$ 127.40
Pure Breeze Fume Hood Bench Top Stand - 18in [V# 10516 ] air purifier
VANIMAN - 103476 Pure Breeze Air Clean System
US$ 1,451.45
*Pure Breeze Air Clean System
*Air Filtration System
*Four stage filtration system removes dust, odors, and microscopic particles and microbes
*Less than half the size of competitive air cleaners
*Three-speed system for proper cleaning of rooms up to 1000 square feet
*Handles laboratory airborne particles with true HEPA filtration
*Captures airborne bacteria and viruses
*Simple and economical filter replacement
*Ultra quiet design
*Long life motor assures years of maintenance free motor operation
*Weighs a fraction of other air cleaners while maintaining the best filtration and air cleanliness
available
*Ships standard UPS, no expensive freight bills
3 Year Warranty
*110V
*2.00Amps
*Weight: 82lbs
21/05/2010 / 1284
77
Dust Collectors
VANIMAN - 103477 Pure Breeze Air Sys & Hood
US$ 1,451.45
*Pure Breeze Air Clean System and Hood
*Air Filtration System
*Removes fumes, smoke and odors generated by burnout furnaces, monomer and most laboratory
processes
*Can be used as a general room air purifer for rooms up to 1000 square feet if floor space is an issue
*Removes dust, microscopic particles and microbes
*No duct work or external exhaust required
*Can be wall or ceiling mounted or on the work surface with the optional stand
*Super quiet, 3 speed maintenance free motor
*Four-stage filtration that is simple and economical to replace
*Wall mounting bracket and ceiling hooks included
*Optional remote
*110V
*2.00Amps
*Shipping Dimensions 24 x 21 x 33in
*Weight: 80lb
VANIMAN - 103479 Pure Breeze Fume Hood Shield
US$ 109.20
Pure Breeze Fume Hood Shield - FOR STAND ONLY - [V# 10517 ] air purifier
Dust Collectors
Dust collectors accesories
ECCO - 102187 1.5 inches hose x 12Ft w/con.
US$ 57.00
1.5 inches hose x 3 Ft w/conector - for Vh- Bijato and dust collectors -
VANIMAN - 105005 Air noise reduction accessory
US$ 25.90
Will dramatically decrease the air noise created by point of collection accessories- Connects to 1.5 inch hose
(1.75 inch hose end) or 2.5 inch hose- adapters inluded - Shipping Dimensions (L inxW inxH in) 11.00 in x 4.00
in x 4.00 in 1lb [ ram ]
WORLDENT - 101296 AirPort 65x 80mm
US$ 121.00
AirPort - Dust Collector Accessories - 2-1.2inch x 3inch [ 65mm x 80mm ] - [W# A101 ] [W# AA041 ] -With
egronomic comfort cushion control -
WORLDENT - 101297 AirPort Illuminated 65x 80mm
US$ 166.00
Illuminated AirPort - Dust Collector Accessories - 2 -1/2inch x 3inch [ 65mm x 80mm ] - {W# AA102 ]
[W#AA042 ] - With light and adjustable plexi-sheild -
78
21/05/2010 / 1284
Dust Collectors
WORLDENT - 101298 AirTop 65mm
US$ 75.00
AirTop - Dust Collector Accessories - 2-1/2inch [ 65mm ] [W# A103 ] - With comfort cushion wrist-rests -
HANDLER - 103388 Etcher Catcher w/Filter
US$ 312.62
*#52CFI Etcher Catcher with Filter and External Flange 3in
*For use with your dust collector
*Collects dusts created by the use of aluminum oxide blasting pencils
*Offered in three configurations
*The Etcher Catcher is constructed to be ergonomically accommodating when used with hand held blasting
pencils
*Preventing dusts from collecting on table tops and surrounding areas
*Unit Dimensions: 11 wide x 16 deep x 9 high [27.9cm x 40.6cm x 22.8cm]
*Model: 52CFI
HANDLER - 103387 Etcher Catcher w/o Suction
US$ 273.42
*#52 Etcher Catcher without Suctions
*For light office use
*The Etcher Catcher is constructed to be ergonomically accommodating when used with hand held blasting
pencils
*Model: 52
VANIMAN - 105007 Fish Mouth Plus w/ Flex Shield
US$ 76.44
Fish Mouth with fully adjustable clear shield - Shipping Dimensions (LinxWinxHin) 12.00in x 12.00in x 6.00in
2.00 lbs. [ ram ]
WORLDENT - 101299 Fishmouth Attachment 65x 80mm
US$ 82.00
Fishmouth Attachment - Dust Collector Accessories - 2-1/2inch x 3inch [ 65mm x 80mm ] [W# H151 ] [W#
AA051 ]
VANIMAN - 104999 Fishmouth for collector hose
US$ 55.97
- Fishmouth for 1-1/2in or 2-1/2in hose.
- Shipping Dimensions (LxWxH) 10.00in x 7.00in x 7.00in
- Shipping Weight 5.00 lbs. [ Adaptador boca de pez para manguera (ram)]
21/05/2010 / 1284
79
Dust Collectors
VANIMAN - 105003 Flexible Hose Kit
US$ 127.40
Flexible Hose Kit (3ft Lx21/2in Wx21/2in D). Kit includes removable bench clamp and hardware to mount to
bench top or vertical surface. Connects to 2 or 3 hose or other sizes with optional adapters
Shipping Dimensions 18in x 10.00in x 8.00in 5lb [ ]
VANIMAN - 105010 Mobile Jet-Port work block
US$ 51.40
- Mount temporarily or permanently at the frontof a standard bench or table-top.
- Easily attachedto any dust collection system from below.
- Mobile Jet-Port (3-1/2inWx6inLx1-1/2inT work block) for 1-1/2in hose.
- Shipping Dimensions (LxWxH) 9.00in x 6.00in x 6.00in 2.00 lbs [ (ram) ]
VANIMAN - 105002 Poly Guard I for hose
US$ 37.00
Poly Guard I (7inHx8inWx7inD) for 1-1/2in or 2-1/2in hose. VMC-1006A adapter included for 1-1/2in hose.
Shipping Dimensions (LxWxH) 13.00 x 10.00 x 8.00 - Shipping Weight 3.00 lbs. [ ram ]
VANIMAN - 105008 Poly Guard II Shield
US$ 55.97
- Accessories sit on or are attached to bench-top surface.
- Easily attached to dust collection system from rear.
- Poly Guard II Shield (10inHx9inWx7inD) for 1-1/2in or 2-1/2in hose.
- VMC-1006A adapter included for 1-1/2in hose.
- Shipping Dimensions (L.inxW.inxH.in) 13.00.in x 10.00in x 11.00in 4.00 lbs [ (ram) ]
VANIMAN - 105013 Replacement for Flex Shield
US$ 18.00
Replacement shield for FlexShield and Fish Mouth Plus with FlexShield (Shield Only). [ ]
VANIMAN - 105012 Splash Guard w/ hose adapter
US$ 60.97
- Splash Guard (13in x10in x13 inches) for 1-1/2 in or 2-1/2 in hose.
- VMC-1006A adapter included for 1-1/2in hose.
- Removable Dust Tray
- Rugged Molded Plastic [ (ram) ]
80
21/05/2010 / 1284
Dust Collectors
VANIMAN - 105004 Splash Hood w/ Light
US$ 116.00
Splash Hood w/ Light for 1-1/2 in or 2-1/2 in hose. VMC-1006A adapter included for 1-1/2in Fluorescent Light Adjustable Clear Shield- Removable Dust Tray Rugged Molded Plastic - Shipping Dimensions (LxWxH)
14.00in x 14.00in x 10.00in 5lb [ ram ]
VANIMAN - 105011 Splash-Vac
US$ 199.20
- Fluorescent Light
- Adjustable Clear Shield
- Removable Dust Tray
- Rugged Molded Plastic
- Voltage 115.00 VAC
- Shipping Dimensions (LxWxH) 14in x 14in x 10in - 10lbs [ (ram) ]
QUATRO - 101356 Whisper Quiet Exhaust System
US$ 84.00
Whisper Quiet Exhaust System - Optional Acessories for Velocity Series Only [J# H250 ]
VANIMAN - 104998 Work surface accessory
US$ 129.00
- Work surface dust collector accessory
- Connects to 1.5 inch hose (1.75 inch hose end) or 2.5 inch hose- adapter included.
- Shipping dimensions: 14x12x6 inches
- Weight 7.50 lbs [ Superficie de trabajo (ram) ]
Dust Collectors
Filter bags for Dust Coll.
WORLDENT- 101395 Deluxe Filter Bags 5pk
Anti-Microbial Deluxe Filter Bags ( 5pk ) for JetStream -
US$ 48.70
[Q# AG1135 ]
VANIMAN - 105050 Filter Bag Replacement
US$ 0.00
Filter bag fits Microstar dust collector series V4000- V3000- V2000- 1 per package - Filters 97% at 1 Micron
Shipping Dimensions 14.00 x 11.00 x 3.00 [ 97031 ]
21/05/2010 / 1284
81
Dust Collectors
VANIMAN - 105037 Filter Bags 5-Pak
US$ 49.00
Filter Bags 5-Pak - [ VMC-A400-5 ]
US$ 0.00
Filter Bags 3-Pak - [ VMC-A400-3 ]
US$ 0.00
Filter Bags 5-Pak - Drawer filter bag - 5 per package - Filters 97% at 1 Micron Shipping Dimensions [ 97028 ]
HANDLER - 103390 Filters 12x24x2in 2pk
US$ 24.50
#60A Fiber glass filters - 12x24x2in - for use with polishing units - 2pk use with 60B - 60C - 60D - shipping
weight 5lb
HANDLER - 103391 Filters 12x32x2in 2pk
US$ 30.87
#60AA Fiber glass filters - 12x32x2in - for use with special polishing units - 2pk use with - 60C - 60D - 60J shipping weight 3lb
Dust Collectors
Multi Stations Dust Collector
HANDLER - 103490 #77 Dust Collector w/Bag
US$ 1,715.00
77 Dust Collector with Bag
*A 3/4 HP suction unit
*Designed to provide suction for up to three 3 [7.6cm] work positions, simultaneously
*Powered by a ball bearing
*Capacitor start industrially rated motor
*Contains 62 square feet [5.8m2] of cloth filter area
*24 cloth filters are cleaned with the aid of an external foot shaker
*Generates 600 CFM (cubic feet/minute) [283m3/min.] through the inlets provided
*Standard voltage is 110Volts/60Hz
*Shipped complete with switch and box type silencer
*A stack silencer is available at additional cost.
82
21/05/2010 / 1284
Dust Collectors
*Suction - 600 CFM (cubic feet/minute)[283m3/min.] through inlets provided
*Filter Area - 62 sq. ft. through 24 shakeable filter bags.
*Cleaning - External foot Shaker
*Removable cabinet tray.
*Unit Dimensions: 24 wide x 20 deep x 38 1/2 high [61cm x 51cm x 98cm]
*Available with polyester bags for use with aluminum oxide, at additional cost.
*Model: 77
VANIMAN - 103470 V6 for up tp 6 stations 110V
US$ 2,716.35
V6 Dust Collector
*Up to 6 stations
*New ultra quiet brushless motor (59 decibels on high)
*Variable speed control
*Hepa cartridge filtration
*Push button Air-Pulse filter maintenance system
*Large dust collection tray
*2 year warranty
*110V
*12.50Amps
*Shippinng Dimensions: 41 x 26 x 25in
*Weight: 136lbs
Dust Collectors
Work Stations
HANDLER -101888 550 Port-a-vac Bench Top 110v
US$ 272.69
*550 Porta-Vac bench top dust collector
*Handler Manufacturing announces a new and improved Porta-Vac unit Model #550
*This is replacing the traditional Model #66 Porta-Vac.
*It is perfect for bench top light grinding and polishing with a hand piece or lathe.
*Featured enhancements include 40% more suction power
*Compact in line suction design
*Removable resin clean out tray
*Replaceable clear acrylic shield
*Reusable and replaceable pleated rear filter
*Also, the #550 comes with a florescent light for hours of cool, bright operation.
*Will collect 0.5 microns of dust and larger particles.
*The unit was designed for better, more efficient performance and easy operation.
* Take it out of the box, install the light, plug it in, and it is ready for use.
*The durable white powder coated heavy gauge steel frame is built to last
*The unit is made in the USA by Handler
*The compact, lightweight and efficient #550 Porta-Vac is 81/2wide x 12high x 12deep.
*Shipping Weight: 17 lbs
*Unit Dimensions: 8 1/2wide x 12high x 14deep
*Model: 550
HANDLER - 103389 Etcher Catcher w/dust collect
US$ 361.62
#52CSU Etcher Catcher w/filter and self contained dust collector New Dust Collector -collects dust created by
the used of aluminum oxide blasting pencils - Construted to be ergonomically accomodating when used with
hand held blasting pencils - preventing dusts from collecting on table tops and surrounding areas - *#52CSU
Etcher Catcher with Filter and Self Contained Dust Collector
*The Etcher Catcher is constructed to be ergonomically accommodating when used with hand held
blasting pencils
21/05/2010 / 1284
83
Dust Collectors
Work Stations
*Model: 52CSU
VH-100834 Work Station Chamber
110/220V
US$ 126.11
VH- WORKSTATION CHAMBER with dust collector for small particules
-Wide window for better work visualization
- Modern design
- Polystyrene box of high impact confectioned in 3mm thickness
- Viewfinder crystal of 1 1/2 mm with protective film to prevent saturation of
viewfinder
- Removable case to facilitate cleaning
- Vacuum system included-for unwanted particles that during worktime
confuse visualization of parts - this eliminates the need of using protective
masks for breathing for the operator
- Washable and reusable air filter - Auto voltage 110/220volts
- Dimensions: 340 x 340 x 210 mm - 50/60 Hz - Liquid Weight 1.5kg
Dust Collectors
Dust collectors Parts
VANIMAN - 102495 Sm Acum for 1.5in (no hose)
US$ 112.00
Small Acumulator for 1.5in hose -(sold without hose) - Dust collectors accesories -
Electro Polishers
Electro polisher Units
NOBILIUM - 100813 Elect Polish w/timer 1Frw 110v
US$ 1,494.00
Nobilium & Ticonium Timer controled Electro polisher [ Nobilium # 8018 & Ticonium # 3155 ] - 1
Framework at a time - 110volts - Separated bowl - 14x 18x 17cm - [ 5-1/2x 7x 6-1/2in diam ] 3.7 ltrs - 0.8
gallon capacity - Timer prevents over polishing - Available in botth cobalt and nickel chrome configurations
[ please make choice when ordering ] - Comes complete with Bowl - tray and clips Eliminates
mechanical polishg on the tissue side of case- Provides excellent working surface for quicker final polishing
- Shipping : 25lb [ 11.5kg ]
ECCOp -101375 Electro-Polisher 1Fr 110v
US$ 532.00
Electro Polish Unit Compact- solid-state 10 amp unit. Polishes two cases at a time.- Made in USA - [electropolisher pulidor
electrolitico]
84
21/05/2010 / 1284
Electro Polishers
BEGO - 101348 Eltropol 300 Intel- 2Frw 110v
US$ 2,969.40
Intelligent Eltropol 300 Polishing Unit - 2 Frameworkss simultaneously - 110volts 50Htz - Machine
Dimensions : 18x 16 x 11inches [45x 40 x 25cm] -Tub Capacity : 2 liters/ 1/2 gallon - Shipping
information : weight 10kg [ 22lbs] [B# 26310 ] -The intelligent electrolytic polishing unit has automactic
proposal of polishing time for different size objects- simultaneous polishing of two partial dentures - User
friendly operating panel with display and soft keys - (Not separated tub/bowl ] - Indicator to show when the
solution in the polishing bath is due to be changed - Excellent polishing results ensured by uniform
movement of the polishing bath - High level of saftey thanks to firm contact with object lamps-
BEGO - 101347 Eltropol E Autom 1Frw 110v
US$ 2,051.00
Eltropol E Polishing Unit - 1 Framework - 110volts 50Hz Separated bowl : Machine dimensions : 9x 12 x 10inches [
230x 300 x250mm] - weight 6.5 kg - [14lbs] - Bowl Capacity : 1 liter - [B# 25896 ] -Quick-acting short-circut cutout Automatic current control with three power settings - High degree of saftey through firm contact with object lamps Speedy completion of polishing work in 2 x 4-6 minutes - LED current indicator and timer - Polishes one case at a time
- superb polishing results through object movement - bath heating and extremely efficient ring cathode -
Felts
Felt Cones
FELT CONES ( Keystone )
*For use with threaded mandrel or tapered spindle
*Medium hard pure woolen felt
*12pk
Price
+
034-1340010
Code
KEYSTONE - White Felt Cones - 1x 1/2inches diameter ...
Name
US$ 24.00
+Info
034-1340020
KEYSTONE - White Felt Cones - 1x 1/2inches diameter ...
US$ 24.00
+Info
034-1340030
KEYSTONE - White Felt Cones - 1-1/2x 3/4inches diameter ...
US$ 24.00
+Info
034-1340040
KEYSTONE - White Felt Cones - 1-1/2x 3/4inches diameter ...
US$ 24.00
+Info
034-1340050
KEYSTONE - White Felt Cones - 2x 1inches diameter ...
US$ 41.25
+Info
034-1340060
KEYSTONE - White Felt Cones - 2x 1inches diameter ...
US$ 44.50
+Info
1340010-1
KEYSTONE - White Felt Cone Pointed - 1x 1/2inches diameter ...
US$ 3.00
+Info
1340020-1
KEYSTONE - White Felt Cones Blunt - 1x 1/2inches diameter ...
US$ 3.00
+Info
1340030-1
KEYSTONE - White Felt Cones Pointed - 1-1/2x 3/4inches diameter ...
US$ 3.00
+Info
1340040-1
KEYSTONE - White Felt Cones Blunt - 1-1/2x 3/4inches diameter ...
US$ 3.00
+Info
1340050-1
KEYSTONE - White Felt Cones Pointed - 2x 1inches diameter ...
US$ 4.90
+Info
1340060-1
KEYSTONE - White Felt Cones Blunt - 2x 1inches diameter ...
US$ 4.90
+Info
Felts
Felt Cylinders
21/05/2010 / 1284
85
Felts
Felt Cylinders
FELT CYLINDERS ( Keystone )
Ideal for polishing metals and plastics when combined with polishing compound.
Use with short screw mandrel
Price
+
034-1340100
Code
KEYSTONE - Felt Cylinder 10x 6mm 100pk
Name
US$ 18.97
+Info
034-1340070
KEYSTONE - Felt Cylinder 13x 6mm 100pk
US$ 18.97
+Info
Felts
Felt Wheels
FELT WHEELS (All Brands)
Ideal for polishing metals and plastics when combined with polishing compound.
Use with short screw mandrel
Price
+
034-1340130
Code
KEYSTONE - Felt Wheels - Hard - 1x 1/8inches diameter...
US$ 18.97
+Info
034-1340160
KEYSTONE - Felt Wheels - Medium 1x 3/16inches diameter...
US$ 18.97
+Info
034-1340190
KEYSTONE - Felt Wheels - Soft 1x 1/4inches diameter...
US$ 18.97
+Info
ECCO - Felt Wheels 1x 0.20inches diameter ...
US$ 15.34
+Info
101778
Name
Fiber Posts
PARAPOST ( Coltene Whaledent )
DRILL AND DRIVER
Code
063-TEDC1
Name
COLTENE WHALADE - Starter Drill and Hand Driver
Price
+
US$ 15.34
+Info
POSTS
Code
063-PF160
86
Name
COLTENE WHALADE - Parapost Fiber White Post Intr
Price
+
US$ 129.90
+Info
21/05/2010 / 1284
Fiber Posts
063-PF16145
COLTENE WHALADE - Parapost Fiber White Post 5 Pa
US$ 37.67
+Info
063-PF1615
US$ 37.67
+Info
063-PF16155
US$ 37.67
+Info
063-PF1616
US$ 37.67
+Info
Fiber Posts
Glass fiber posts
ARQUIMEDE LINE ( Innopost )
- Innotech is the production leader of endocanalar posts in fiber glass and carbon glass.
- The company is technologically in the forefront, the whole production cycle is realized with special CNC machinery
and the row materials employed are of high quality.
- The fiber endo posts are used and appreciates in very many countries of the world and commercialized with large
succes through a selected net of exclusive distributors.
DRILLS
Price
+
106693
Code
INNOTECH - ARQUIMEDE-Drill - IAL-100-F - 1 drill per box - Innopost radiopaque
Name
US$ 6.00
+Info
106694
US$ 6.00
+Info
106695
US$ 6.00
+Info
POSTS
Price
+
106690
Code
INNOTECH - ARQUIMEDE-Glass Fiber Endo Post 1.00mm 10pk - Refill - ( IAL-100-VR ) - Innopos...
Name
US$ 24.00
+Info
106691
US$ 24.00
+Info
106692
US$ 24.00
+Info
LEVEL ONE ( Innopost )
DRILLS
Price
+
106681
Code
INNOTECH - LEVEL ONE-Drill - ILO-100-F - 1 drill per box - Innopost radiopaque
US$ 6.00
+Info
106682
US$ 6.00
+Info
106683
US$ 6.00
+Info
21/05/2010 / 1284
Name
87
Fiber Posts
Glass fiber posts
POSTS
Price
+
106678
Code
INNOTECH - LEVEL ONE-Glass Fiber Endo Post 1.00mm 10pk - Refill - ( ILO-100-VR ) - Innopost...
Name
US$ 24.00
+Info
106679
INNOTECH - LEVEL ONE-Glass Fiber Endo Post 1.20mm 10pk - Refill - ( ILO-120-V ) - Innopos...
US$ 24.00
+Info
106680
INNOTECH - LEVEL ONE-Glass Fiber Endo Post 1.40mm 10pk - Refill - ( ILO-140-VR ) - Innopos...
US$ 24.00
+Info
MATRIX PLUS 2 ( Innopost )
DRILLS
Price
+
106687
Code
INNOTECH - MATRIX PLUS2-Drill - IMP-90-F - 1 drill per box - Innopost radiopaque
Name
US$ 6.00
+Info
106688
INNOTECH - MATRIX PLUS2 -Drill - IMP-100-F - 1 drill per box - Innopost radiopaque
US$ 6.00
+Info
106689
INNOTECH - MATRIX PLUS2 -Drill - I IMP-120-F - 1 drill per box - Innopost radiopaque
US$ 6.00
+Info
POSTS
Price
+
106684
Code
INNOTECH - MATRIX PLUS2-Glass Fiber Endo Post 0.90mm 10pk - Refill - ( IMP-90-VR ) - Innopo...
Name
US$ 24.00
+Info
106685
INNOTECH - MATRIX PLUS2-Glass Fiber Endo Post 1.00mm 10pk - Refill - ( IMP-100-VR ) - Innop...
US$ 24.00
+Info
106686
INNOTECH - MATRIX PLUS2-Glass Fiber Endo Post 1.20mm 10pk - Refill - ( IMP-120-VR ) - Innop...
US$ 24.00
+Info
Flasks & Compresses
HANDLER - 103362 C&B Press 2-3/4x2-5/8x6-1/4in
US$ 108.00
#42A Crown&Bridge Compress - 2-3/4x2-5/8x6-1/4in
- 1 flasks - Built of sturdy cast bronze alloy
- This frameis modified with two stainless steel springs to provide compensatory spring action during the
processing ofacrylic veneers and bridges
- Shipping weight 5lb
88
21/05/2010 / 1284
Flasks & Compresses
HANDLER - 103361 C&B Press 2-3/4x2-5/8x6-1/8in
US$ 102.41
# 42 Crown&Bridge Press - 2-3/4x2-5/8x6-1/8in
- 2 flasks - Built of sturdy cast bronze alloy
- Flasks having amax height of 1-3/4in
- Inside dimensions are 4-1/2x 2-1/8in
- Not to be used with #38F bridge Flask
- Shippingweight 5lb
Flasks & Compresses
Compresses
HANDLER - 103419 #61A Flask Compress -One Flask
US$ 138.60
#61A Flask Compress
- 4-3/4x2-7/8x5-3/4in
- One Flask Used for curing a single flask
- Built of bronze alloy with stainlesssteel compensatory springs
- Provides years of service
HANDLER - 103420 #61B Flask Compress -Two Flask
US$ 136.40
#61B Flask Compress
- 4-1/8x2-1/2x7-1/2in
- Two Flask (maquina Inyectora machine) Valplast
- Lucitone FRS- Flexite-Acetal- Dental D- Duraflex
- Acrylics by injection
- Nylon Injector - curing operation
- A suitable allen wrench - woodcapped holding handle and brass lifting handle are supplied with each compress
- Shipping Weight 8lb
HANDLER - 103421 #61C Flask Compress-ThreeFlask
US$ 155.40
61C Flask Compress - 5x2-5/8x10-3/4in
- Three Flask [ (maquina Inyectora machine) Valplast
- Lucitone FRSFlexite-Acetal- Dental D- Duraflex- Acrylics by injection
- Nylon Injector - curing operation
- A suitable allenwrench - woodcapped holding handle and brass lifting handle are supplied with each compress
- Shipping Weight 9lb
ECCO - 100695 Compress #2 Spring Bronze ea
US$ 76.00
ECCO Compress #2
- #2 Spring Compress
- Handle
- Wrench
- Bronze
- Made in USA
HANDLER - 103402 Flask Press 10x4-1/2x8-1/2in
US$ 138.18
#38 Big Boy Flask Press - Single Flask
*A Heavy Duty Single Flask Press manufactured of malleable/ductile cast iron for durability and long wear.
*Press is provided with alloy steel shaft
*Grey iron handle and malleable/ductile iron pressure plate
*Holes in frame allow for easy bench mounting
*38A Clamps may be utilized for easy bench mounting and/or removal
*Big Boy Flask presses are designed for the busy laboratory
*Unit Dimensions: 10 long x 4 1/2 wide x 8 1/2 high [25cm x 11cm x 22cm]
*Model: 38
21/05/2010 / 1284
89
Flasks & Compresses
Compresses
HANDLER - 103359 Flask Press 10x4-1/2x10in
US$ 175.42
#38B Big Boy Flask Press
- Two Flasks
- A Heavy Duty Two Flask Press manufactured of malleable/ductile cast iron
- Features are the same as 38 Press
- Except this unit is designed to accommodate two flasks simultaneously
- Both 38 and 38B Big Boy Presses are designed for the busy laboratory
- May be utilized with 38A Clamps for easy bench mounting
- Shipping Wgt.: 24 lbs [10.9 Kg]
- Unit Dimensions: 10 long x 4 1/2 wide x 10 high [25cm x 11cm x 25cm]
- Model: 38B
HANDLER - 103357 Flask Press 7-3/4x3-1/2x73/8in
US$ 94.00
#33 Little Giant Flask Press - Single Flask
*Constructed of malleable/ductile iron
*Will provide years of trouble free service under normal pressing procedures
*Inside dimensions: 5 wide x 4 max. height [13cm x 10cm]
*Order with 38A bench clamp
Technical specificcations:
*Unit Dimensions: 7 3/4 long x 3 1/2 wide x 7 3/8 high [20cm x 9cm x 19cm]
*Model: 33
Flasks & Compresses
Denture Flasks
HANDLER - 103370 #48A Bridge Flask - 3pieces
US$ 107.58
#48A Bridge Flask
- Comes in three pieces Acrilian c&b Flask
- A older style flask for acrylic crowns - cast inbronze
HANDLER - 103371 #48F Bridge Flask - 4pieces
US$ 93.15
48F Bridge Flask - 3x2-3/8x1-1/2in
- Comes in four pieces this C&B flask is built for the prefectionists use in makingprocessed temporary splints
- Harder stainless steel tapered pins provide for the precise alignment of the four sections -it is durable
contruction affors excellent resistance to warpage and distortion during pressing and processingopertations
KEYSTONE - 1350010 565 Handler 22C - Up bronze ea
US$ 91.06
565 Flask- Handler 22C
- Upper bronze - 4-1/4in x 3- 1/4in x 2- 1/4in [11cm x 8cm x 6cm]
- Keystone Abrasives -Keystone Dental Tools
- Us Dental Depot is specialized business in Dental lab equipment & Dental PorcelainFurnaces.
HANDLER - 103383 King Size Flask 3-3/8x3-1/3/16
US$ 371.42
#49A King Size Flask 3-3/8x3-1/3/16in
- Dentists and technicians occasionally require an extra large flask for a specail purpose
- These four piece bronze cast flasks with their substantial dimensions will be found suitable for the investing of large
prostheticappliances or several resin bridges partials or full dentures at one time
- The sections are slightly tapered to allow for
90
21/05/2010 / 1284
Flasks & Compresses
Denture Flasks
easierde-flasking procedures without requiring a special device - Shipping weight 7lb
KEYSTONE - 1350025 565 Handler 22C- Low bronze ea
US$ 91.06
565 Flask- Handler 22C
- Lower bronze -4-1/4in x 3- 1/4in x 2- 1/4in [11cm x 8cm x 6cm]
HANDLER - 103372 C&B Flask 3-3/8x2-1/4x3-1/8in
US$ 350.00
48X C&B Flask 3-3/8x2-1/4x3-1/8in
- Round House Type denture flask for shade blending of resin teeth - orprocessed temporary splints
- Flask
pasts separate readily for ease of processing
- Correct size for investing a fullarch or a partial case
- Supplied with insert and bottom knock out for easy removal of restoration
- Designed to resistwarpage and distortion the cast bronze fitted flask is constructed of solid bronze alloy
-Supplied with locking wrench
HANDLER - 103369 De Flasking Disc 3x2-3/4x3/8in
US$ 22.05
47D De Flasking Disc 3x2-3/4x3/8in - 12pk
- An aid designed to help locate denture teeth in a flask processed dentuer
-The disc will help protect teeth during the deflasking procedure - made of aluminium - can be used over and over
againshipping weight 1lb.
ECCO - 100692 Denture Flask Lower Bronze ea
US$ 52.00
ECCO Denture Flask Lower
- Excellent quality - very strong and durable - polished insides & easy cleaning
- HS# 6996149
ECCO - 101001 Denture Flask Lower Bronze ea
US$ 43.00
ECCO Denture Flask Lower - -strong and durable - polished insides & easy cleaning - Made in Korea - [
muflas bronce ] [knockout ]
ECCO - 100691 Denture Flask Upper Bronze ea
US$ 52.00
ECCO Denture Flask Upper
- Excellent quality - very strong and durable - polished insides & easy cleaning
- [HS#6994612]
21/05/2010 / 1284
91
Flasks & Compresses
Denture Flasks
HANDLER - 103365 Giant Flask 4-5/8x4-3/8x23/4in
US$ 293.02
#44G Atlas Giant Denture Flask 4-5/8x4-3/8x23/4in
- Uses little Giant compress
- When conventional size flasksare not large enough this flask should be used
- Cast of bronze alloy its used in reconstructive maxillo-facialprocedures - fitted with 3 separate sections a
bottom k.o disc - and rear tapered stainless steel guide pins foreasier flask and de-flasking - ( Uses little Giant
compress )
- Weight: 5lb
HANDLER - 103366 Lower Flask 4x3-3/4x2-1/4in
US$ 82.00
#44L Lower Denture Flask 4x3-3/4x2-1/4in
- Lower flask is constructed the same as the uppr flsk but with a slanted heel section toaccommodate cases with high condyles
- It is tapered rear guide pins smooth interior and special bronze alloy provides ease offunction during flaskking and de-flasking
operations
KEYSTONE- 034-1502400 Reline Jig
US$ 75.00
Reline Jig
-Mufla de rebasados - reliner flask -
HANDLER - 103367 Upper Flask 4x3-3/4x2-1/4in
US$ 82.00
#44U Upper Denture Flask 4x3-3/4x2-1/4in
Flasks & Compresses
Duplicating Flasks
RAY FOSTER - 101587 Duplicat. Flask Raised Base ea
US$ 18.63
Duplicating Flask - Raised Base - Base: 4in [101mm] x 3-1/8 [96mm]
- Inside height: 2-5/8in - [10cm x 8cm x6.6cm ] [R# D78A]
- Weight 12oz - shipping weight 14 oz [.4kg] - made of durable die cast aluminum andfinished with a smooth
baked-on powder ocast - the smooth finish facilitates the easy removal of the duplicatingmaterial
NOBILIUM-NOB-6025 Duplicat. flask Raised base ea
US$ 25.00
Duplicating flasks ] [ aluminum flask for duplicating] [ raised base flask] [knockout ]
RAY FOSTER - 101586 Duplicating Flask Flat Base ea
US$ 18.63
Duplicating Flask - Flat Base - Base: 4in [101mm] x 3-1/8 [96mm] - Inside height: 2-5/8in - [10cm x 8cm x 6.6cm ] [R# DF78] - Weight
12oz - shipping weight 14 oz [.4kg] - made of durable die cast aluminum and finished with a smooth baked-on powder ocast - the
smooth finish facilitates the easy removal of the duplicating material -
92
21/05/2010 / 1284
Flasks & Compresses
Duplicating Flasks
NOBILIUM-NOB-6022 Duplicating Flask Flat base ea
US$ 25.00
Duplicating Flasks [ aluminum flask for duplicating ] [ flat base flask] [knockout ]
HANDLER - 103368 K O Ejector 5x4-1/2x2in
US$ 97.02
#47 K O Ejector 5x4-1/2x2in Designed for use in ejecting poured modles from 22c denture flasks only - use in
conjunction with and handler flsk press - shipping weight 5lb
HANDLER - 103418 Spring Filler 3-1/2x2-1/2in
US$ 58.31
#35 Spring Filler
- A bronze filler which provides flasked cases with compensatory spring action with the aid of two stainless steel
springs.
- Used in Handler presses to provide compensatory spring action during curing of flasked dentures
- Shipping Wgt.: 1 lb [0.5 Kg]
- Unit Dimensions: 3 1/2 wide x 2 1/2 deep x 1 1/2 high[8.9cm x 6.35cm x 3.8cm]
- Model: 35
Flasks & Compresses
Flasks Accessories
HANDLER - 103364 #44D Bronze K.O. 2-7/16x3/16in
US$ 15.63
#44D Bronze K.O. - 2-7/16x3/16in - Disc for 44 upper lower and atlas giant flask - also fits a varity flask
HANDLER - 103363 Atlas Flask Ejector
US$ 107.31
#44A Atlas Flask Ejector - 6-1/2x3-1/2x6-1/2in
- Designed to easily eject poured models from flasks withsmooth mechanical action
- Spring loaded side levers adjust to upper or lower flask configuration with a quickmovement of an indicating lever
- Intial insertion separates mid and lower flask sections - final insertion separtaesmodel from mid section
Flasks & Compresses
Flasks for Flexibles thermopla
FLEXITE - 101824 Alum Flask for Nylon Inject ea
US$ 240.00
Mufla Para Nylon Flexible (Flexite) Ris Flask C&D Mufla Extra
21/05/2010 / 1284
93
Flasks & Compresses
VH - 100898 Alum Flask for Nylon Inject ea
US$ 85.00
VH- Aluminum Flask for Nylon Injection Machine - Mufla P/Microinyectora General Flexite Val Plast SABILEXTECNODENT ( Extra procedure required ) - VALPLAST- FLEXITEFlask Injection Machine - Mufl [knockout ]
shipping information
CFS - 202106 Alum Flask for Nylon Inject ea
US$ 148.50
Injection Flask - a heavy duty alumimum flask manufactured with a special design with a key - - Flask for
Nylon Injection Machine -
Flasks & Compresses
Flasks for Microwave
ECCO - 101466 Flasks for Microwave ea
US$ 175.00
Microwaveable Flasks For Molloplast-B- and microwave acrylics - Mufla Microondas Stock. Frascos y
accesorios de Microwaveable para Molloplast-B. and Zcryl
Flexible Nylons
Parts for CFS products
CFS - 210106-1 CFS Hot Air Welder TIP
US$ 14.00
Tip- for CFS Hot Air Welder -
Flexible Nylons
FLEXITE - 102131 Plus Repair Liquid 4 Re-Inject
US$ 22.00
Flexite Plus Repair Liquid for reinjecting - compatible with other flexible materials-
Flexible Nylons
Accesory Prods
94
21/05/2010 / 1284
Flexible Nylons
Accesory Prods
CFS - 270106 CFS Denture Cleaner 75gr
US$ 8.00
CFS Denture Cleaner - 75gr bottle- Last for 1 month - This product is used to clean all types of removable
dentures and partial appliances [C# 270106]
CFS - 210106 CFS Hot Air Welder
US$ 75.00
CFS Hot Air Welder - has a unique slim design for easy grip - [C# 210106 ] - used fot CFS flexible repairs -
FLEXITE - 108001 Shade Guide Flexite PL/MP/SUP
US$ 8.00
Shade Guide Flexite PLUS /MP /SUPREME ( one of each ) Guia Colores
Flexible Nylons
Bulk Bags
FLEXIBLE MATERIAL x KG ( Flexite )
1. Buy Flexible materials in bulk and fill your own cartridges wit the exact ammount of material you will need
for the specific work
2. Save waste material and money
3. No special equipment needed to close cartridges
Flexible Material x Kg ( CFS )
Price
+
101923
Code
CFS - CFS Regular Pink 1kg
Name
US$ 150.00
+Info
101928
CFS - CFS Light Pink 1kg
US$ 150.00
+Info
103933
CFS - CFS Creation Stand Pink 1kg
US$ 150.00
+Info
103934
CFS - CFS Creation Light Pink 1kg
US$ 150.00
+Info
Flexible Material x Kg ( Flexite )
ACETAL
Price
+
100897
Code
FLEXITE - Acetal color 65 1kg
Name
US$ 0.00
+Info
100896
FLEXITE - Acetal color 62 1kg
US$ 0.00
+Info
Price
+
MP
Code
21/05/2010 / 1284
Name
95
Flexible Nylons
Bulk Bags
101820
FLEXITE - MP Lucitone Pink 1kg
US$ 0.00
+Info
101821
FLEXITE - MP Clear 1kg
US$ 0.00
+Info
101822
FLEXITE - MP Pink 1kg
US$ 0.00
+Info
PLUS
Price
+
100130
Code
FLEXITE - Plus Traslucent Pink 1kg
Name
US$ 0.00
+Info
100037
FLEXITE - Plus Dark Pink 1kg
US$ 0.00
+Info
101180
FLEXITE - Plus Ethnic Brown 1kg
US$ 0.00
+Info
102291
FLEXITE - Plus Flexite Natural 1kg
US$ 0.00
+Info
FLEXITE - Plus Light Pink 1kg
US$ 0.00
+Info
FLEXITE - Plus Translucent Con 1kg
US$ 0.00
+Info
359-01126
100627
PRO
Code
Name
101426
FLEXITE - Pro Guard Natural Clear 1kg
Price
+
US$ 0.00
+Info
SUPREME
Price
+
100201
Code
FLEXITE - Supreme Dark Pink 1kg
Name
US$ 0.00
+Info
100737
FLEXITE - Supreme Natural Clear 1kg
US$ 0.00
+Info
100873
FLEXITE - Supreme Tooth color 1kg
US$ 0.00
+Info
100889
FLEXITE - Supreme Ethnic Brown 1kg
US$ 0.00
+Info
FLEXITE - Supreme Light Pink 1kg
US$ 0.00
+Info
197-01130
Flexible Material x Kg ( GFM )
Price
+
100189
Code
GFM - GFM V-plast color 1kg
Name
US$ 140.00
+Info
102192
GFM - GFM Standard color 1kg
US$ 140.00
+Info
102418
GFM - GFM Crystal Pink 1kg
US$ 140.00
+Info
Flexible Nylons
CFS Cartridges
FLEXIBLE MATERIAL ( CFS )
- Sold in 5pk, 100pk, 250pk, 500pk or as you request
- The price will vary according quantity requested
- Comes with a patient instructional handbook and convenient plastic bag
11-12 minutes 550-570 F - 300-3058 C
CREATION
Creation Large
96
21/05/2010 / 1284
Flexible Nylons
CFS Cartridges
=>100<249
=>250<499
=>500
Price
+
102189
Code
CFS - CFS Creation Standard Lg Tube
Name
$ 6.31
$ 5.98
$ 5.66
US$ 6.50
+Info
102190
CFS - CFS Creation Light PinkLg Tube
$ 6.31
$ 5.98
$ 5.66
US$ 6.50
+Info
Creation Medium
=>100<249
=>250<499
=>500
Price
+
102189-2
Code
CFS - CFS Creation Standard Md Tube
Name
$ 5.34
$ 5.06
$ 4.79
US$ 5.50
+Info
102190-2
CFS - CFS Creation Light Pink M Tube
$ 5.34
$ 5.06
$ 4.79
US$ 5.50
+Info
LARGE SIZE
=>100<249
=>250<499
=>500
Price
+
228106
Code
CFS - CFS Large Rg. Pink Cartrid 5pk
Name
$ 6.31
$ 5.98
$ 5.66
US$ 6.50
+Info
229106
CFS - CFS Large Light Pink Cartr 5pk
$ 6.31
$ 5.98
$ 5.66
US$ 6.50
+Info
230106
CFS - CFS Large Light Purple Car 5pk
$ 6.31
$ 5.98
$ 5.66
US$ 6.50
+Info
231106
CFS - CFS Large White Cartridge 5pk
$ 6.31
$ 5.98
$ 5.66
US$ 6.50
+Info
MEDIUM SIZE
=>100<249
=>250<499
=>500
Price
+
224106
Code
CFS - CFS Medium White Cartridge 5pk
Name
$ 5.34
$ 5.06
$ 4.79
US$ 5.50
+Info
225106
CFS - CFS Med Reg Pink Cartri 5pk
$ 5.34
$ 5.06
$ 4.79
US$ 5.50
+Info
226106
CFS - CFS Med Light Pink Cartrid 5pk
$ 5.34
$ 5.06
$ 4.79
US$ 5.50
+Info
227106
CFS - CFS Med Light Purple Cartr 5pk
$ 5.34
$ 5.06
$ 4.79
US$ 5.50
+Info
SMALL SIZE
=>100<249
=>250<499
=>500
Price
+
236-106
Code
CFS - CFS Small White Cartridge 5pk
Name
$ 4.37
$ 4.14
$ 3.92
US$ 4.50
+Info
222106
CFS - CFS Small Light Pink Cart 5pk
$ 4.37
$ 4.14
$ 3.92
US$ 4.50
+Info
221106
CFS - CFS Small Reg Pink Cart 5pk
$ 4.37
$ 4.14
$ 3.92
US$ 4.50
+Info
Flexible Nylons
Cements for flexibles
ECCO - 102130 #221 Aron Alpha Cement 20gm
US$ 12.00
#221 Aron Alpha Cement - 20gm - Special Formula for Additions on NYLON (Repair) -- ADD on Adhesive for
Nylon cold cure Bonding to Nylon ---[H# 749-6853 ] --- Must be used to add Clasp-eze to acrilyc - Flexite Plus
and Supreme - [ Keyw - aaronalfa liquid adhesive liquido adhesivo ganchos ] Special Cold Add On formula
designed for aditions on Flexite plus and other plastic brands. ( Nylon to Nylon)
TECHNIQUE FOR RE INJECTINGFLEXITE
A) Roughen the area or section where acrylic is to be added. We suggest youuse a paper roll and put in
minor grooves with a square #563 burr.Blow off and leave stubborn fibers in place. They will be
absorbed anddissolved by the bonding agent. This technique is recommended forrelining lower saddles
or adding teeth in non-flexing areas.
B) Apply Flexite bonding agent (Aron Alpha 221) to the roughened surfaceand allow itto dry.
C) Prepare two dappen dishes. Select Rapid Set color of choice and fill onedappendish with Rapid Set
powder and the other with a quick cure monomer.
D) Apply with a brush. After build up, put the partial into a pressure pot forapproximately (7) minutes at
140 degrees fahrenheit.
21/05/2010 / 1284
97
Flexible Nylons
CFS - 208106 CFS Cement 4 Denture teeth
US$ 5.00
CFS Cement - Specifically designed for securing teeth in plaster prior to injection - [C#208106 ]
CFS - 209106 CFS Fusing Liquid
US$ 18.96
CFS Fusing Liquid - used for repairs and or additions - ONLY when flasking and injections are necessary
[C#209106 ]
Flexible Nylons
Flexible Trimmers
CFS - 219106 CFS Knife Blades 12pk
US$ 17.81
CFS Knife Blades - 12pk They where specifically designed for the CFS Knife ( SOLD separately) . - [C# 219106]
CFS - 218106 CFS Knife only
US$ 19.95
CFS Knife - This multi-purpose knife is excellent for removing fiber and unwanted debris left during processing
(used with the CFS Knife Blades- SOLD separately) - [C# 218106]
DIAMOND DISCS ( Ecco )
- Double sided
- Comes with mandrel and plastic box
Price
+
100597
Code
ECCO - Mounted Diamond Disc 0.2mm x 22mm diameter - Narrow (3mm) - double sides - wi...
Name
US$ 5.00
+Info
100598
ECCO - Mounted Diamond Disc 0.2mm x 22mm diameter Thick - Full face (8mm) - 2 sides - ...
US$ 5.00
+Info
100600
ECCO - Mounted Diamond Disc 0.4mm x 22mm diameter Thick - Full Face (8mm) - 2 sides -...
US$ 5.00
+Info
Flexible Nylons
Flexite Acetal
ACETAL RESIN ( Flexite )
FLEXITE ACETAL
- Chemical Family: Acetal ResinsCompared with Duracetal Recommended
1. Acetal Frames ( like alloy frames )
2. Clip on Veneers
3. Tooth color clasps
4. Provisional Splints
98
21/05/2010 / 1284
Flexible Nylons
Flexite Acetal
Characteristics
1. Inherent strength, will never break
2. More flexible than alloy frames
3. Can be re adjusted / adapted to the stone model with the heatgun ( this could never be done in an alloy frame )
4. Can be thinned down without loss of memory or shade - Allowing delicate clasps designs
5. Clasps and roach type clasps feasible
6. Requires a careful design in blocking out undercuts areas, clasp positions, retainers and supports, like in the alloy frames in
7. Chrome cobalt
8. Nothing will stick to it ( like in alloy frames either )
9. Acrylic will stick on it based on mechanical retentions ( like inalloy frames )
10. Can not be easily repaired ( like alloy frames either )
11. Tooth Color Shades: 61, 62, 65, 66, 67, 69, 77, 81 and cross linkto Vita shades too ( A1 A2 etc )12. No Pinks or Clear shades available
Price
+
100267
Code
FLEXITE - Acetal-Med Sh Asstd KIT 9pk
Name
US$ 90.00
+Info
102121
FLEXITE - Acetal-Med Sh #61 Medium ea
US$ 8.00
+Info
102124
US$ 8.00
+Info
102125
US$ 8.00
+Info
102126
US$ 8.00
+Info
102127
US$ 8.00
+Info
102128
US$ 8.00
+Info
102129
US$ 8.00
+Info
102122
US$ 6.25
+Info
102123
FLEXITE - Acetal-Med Sh #65 ea Medium ea
US$ 6.25
+Info
100716
FLEXITE - Acetal-Med Sh #A2 Medium ea
US$ 6.25
+Info
Flexible Nylons
Flexite Guard
GUARD ( Flexite )
FLEXITE GUARD Chemical Family: Styrene-Ethylene Block Co-polymer
1. Elastomer (Thermoplastic Rubber)
2. RecommendedMouth guards in sports
Characteristics
1. Elasticity
2. Flexibility
3. Easy Processing
4. Nothing will stick to it ( thermoplastic rubber )
5. No usable as a reliner since will not stick to the dentureKeeps shape and form
6. Shades: Blue, Pink, and Natural
Large Pro Guard ( Flexite )
Price
+
102087
Code
FLEXITE - Large Pro Guard Natural ea
Name
US$ 8.00
+Info
102088
FLEXITE - Large Pro Guard Blue ea
US$ 8.00
+Info
102089
FLEXITE - Large Pro Guard Pink ea
US$ 8.00
+Info
Medium Pro Guard ( Flexite )
Price
+
102075
Code
FLEXITE - Med. Pro Guard Natural ea
US$ 7.00
+Info
102076
FLEXITE - Med. Pro Guard Blue ea
US$ 7.00
+Info
102086
FLEXITE - Med. Pro Guard Pink ea
US$ 7.00
+Info
21/05/2010 / 1284
Name
99
Flexible Nylons
Flexite MP
Flexible Nylons
Flexite MP
MP MULTI-POLYMER ( Flexite )
FLEXITE MPFLEXITE MP
- Chemical family - Methyl Methacrylate Blend (Multi- PolymerAcrylic)
- Compared with regular High Impact heat cure acrylic like Lucitone but Monomer free,
faster and easier to manipulate.
- Recommended - Full Dentures, TMJs, Bruxism, Provisionals for Implants in progress, Anti-Snoring
Devices, and Silicone-Acrylic Combinations
Characteristics
1. Hi-impact Acrylic. Above average impact and dimensional fit.
2. Perfect Crystal clear comes easy
3. Can be relined or added to with standard repair acrylic
4. Can be relined with a soft reliner silicone based using Flexil
5. Monomer Free
6. Can be added and repaired with regular monomer acrylic
7. Standard colors: Pink, Lucitone Pink, Ethnic Coe Brown andClear
Mp Large ( Flexite )
Price
+
102136
Code
FLEXITE - Mp Large Lucitone-Pink ea
Name
US$ 6.25
+Info
102139
FLEXITE - Mp Large Pink ea
US$ 6.25
+Info
102142
FLEXITE - Mp Large Cristal Clear ea
US$ 6.25
+Info
Mp Medium ( Flexite )
Price
+
102135
Code
FLEXITE - Mp Medium Lucitone-Pink ea
Name
US$ 6.25
+Info
102138
FLEXITE - Mp Medium Pink ea
US$ 6.25
+Info
102141
FLEXITE - Mp Medium Cristal Clear ea
US$ 6.25
+Info
Flexible Nylons
Flexite Supreme
FLEXITE SUPREME
- Chemical family - Co-Polyamides (Casted Nylon)
- Comparable with TCS, just for the polishing conditions
- FlexiteSupreme is way superior in color stability, shrinkage , tensile strengthand dimension stability ( more
memory )
- Comparable in its properties to FRS ( Dentsply )
Characteristics
1. True cast thermoplastic with excellent dimensional fits,comparable to alloy castings
2. Clasps and roach type clasps feasible
3. Gum retainers can be done due its flexibility
4. Designs can be Tooth and Tissue supported ( Dento-mucosupported )
5. Requires a careful design in blocking out undercuts areas , clasppositions, retainers and supports, like in the
alloy frames inChrome cobalt for example
6. Can be relined and added mayor areas by re injecting and usingRepair liquid as an adhesive
7. Can be added and repaired in non flexible areas with Rapid setand using Aaron Alfa as Adhesive
100
21/05/2010 / 1284
Flexible Nylons
Flexite Supreme
8. Acrylic will stick and chemically glue on it with the use ofAaron Alfa
10. Polishes to a high gloss
11. Bio-compatible
12. Clinically unbreakable
13. Can be re adapted to the stone model with the Heat gun withgreat stability
14. Can add esthetic claps using Clasp Eze and Aaron Alfa as anadhesive
15. Almost No Shrinkage comparing with Plus
16. Shades: Lt. Pink, Dk Pink, Natural tooth color , Natural ClearEthnic Brown, and Ethnic Coe22Tooth Color Shades: 61, 62, 65, 66, 67, 69, 77,
81 and cross link toVita shades too ( A1 A2 etc)
Supreme Large ( Flexite )
Price
+
102055
Code
FLEXITE - Supreme Dark Pink Large ea - 1 Cartrige - (25mm Diameter / 1in diam. )[cartridges]
Name
US$ 6.25
+Info
102066
FLEXITE - Supreme Light Pink Large ea - 1 Cartrige - (25mm Diameter / 1in diam. )...
US$ 6.25
+Info
103430
FLEXITE - Supreme Ethnic Large ea - 1 Cartrige - (25mm Diameter / 1in diam. )...
US$ 6.25
+Info
Supreme Medium ( Flexite )
Price
+
100147
Code
FLEXITE - Supreme Ethnic Medium ea - 1 Cartrige - (25mm Diameter / 1in diam. )...
Name
US$ 5.25
+Info
102047
FLEXITE - Supreme Natural Clear Medium ea - 1 Cartrige - (25mm Diameter / 1in diam. )...
US$ 5.25
+Info
102059
FLEXITE - Supreme Dark Pink Medium ea - 1 Cartrige - (25mm Diameter / 1in diam. )...
US$ 5.25
+Info
102069
FLEXITE - Supreme Light Pink Medium ea - 1 Cartrige - (25mm Diameter / 1in diam. )...
US$ 5.25
+Info
Supreme Tooth Color Medium ( Flexite )
Price
+
102029
Code
FLEXITE - Supreme Tooth Color 65 Medium ea - 1 Cartrige - (25mm Diameter / 1in diam. )...
Name
US$ 6.25
+Info
102034
FLEXITE - Supreme Tooth Color 62 Medium ea - 1 Cartrige - (25mm Diameter / 1in diam. )...
US$ 6.25
+Info
101190
FLEXITE - Supreme Tooth Color A2 Medium ea - 1 Cartrige - (25mm Diameter / 1in diam. )...
US$ 6.25
+Info
101191
FLEXITE - Supreme Tooth Color A3 Medium ea - 1 Cartrige - (25mm Diameter / 1in diam. )...
US$ 6.25
+Info
Flexible Nylons
Flexite kits
FLEXITE - 100893 Basic Repairing Kit
US$ 81.00
Basic Repairing KitFlexite
- 2 Rapid Set ( Set Rapido) Pink and Clear
- 1 Aron Alpha 221
- 1 Repair liquid
{ This basic kit has beed designed to solve the most common repairings for the Flexite products - a more
complete Kit including a heat gun is available too -
21/05/2010 / 1284
101
Flexible Nylons
Flexite kits
FLEXITE - 100441 New Flexite Polishing Kit
US$ 130.00
NEW FLEXITE POLISHING KIT
*1 Buff
*1 Kg Policryl
*1 Polishing Liquid Flexite
*1 Red Wheel - 3in Diam
*1 Greenbar
*84TXC HP Carbide Bur
*197-84TXC HP Carbide Bur
*Econo Cutters 4in
*Mounted Buffs 2in
FLEXITE - 102082 Repair Kit - WITH GUN
US$ 340.00
REPAIRING KIT WITH GUN
*Heat Gun
*Rapid Set: Pink & Clear
*Aron Alpha 221
*Video
*2 Clasps Eze 12pk You Choose Pink or Clear
FLEXITE - 100865 Repairing Kit Flexite NO GUN
US$ 168.00
REPAIRING KIT NO GUN
*Rapid Set: Pink & Clear
*Aron Alpha 221
*Video
*2 Clasps Eze 12pk You Choose Pink or Clear
FLEXITE - 100694 Sampler Intro kit 12pk
US$ 45.00
SAMPLER INTRO KIT 12PK
*12 Medium Cartridges
*Colors Include:
Plus Light Pink, Dark Pink, Translucent Pink,
Con Color, supreme Dark, Light and Natural Clear,
Mp Lucitone, Mp Clear, Mp Pink, and Tooth Color
*Instructions for Temperature and Timing Procedures
*Reinjecting and Repairing Tip/Guide
*Shade Guides
*Flexite Plastic Bags for Final Works
FLEXITE - 100866 Starter Kit 50cart/Polish/rep
US$ 344.00
FLEXITE STARTER KIT 50 CARTRIDGES
*Medium Cartirdges
*10 Flexite Plus Light Pink
*10 Flexite Plus Translucent Pink
*10 Flexite Plus Translucent Con Color-Supreme Dark Pink
*5 Light Pink
*5 Supreme Natural Clear
*5 Mp Lucitone Pink Large
*5 Mp Clear
*1 Flexite Polishing Kit
*1 Flexite Basic Repairing Kit
*Printed Flexite Instruction Manual
*Printed Flexibles temperature Chart
*Printed Guides Step by Step for Re Injecting and Repairing
* For Clasps, Acetal, Full Dentures, Acetal Frames, Clasps and Trouble shooting
102
21/05/2010 / 1284
Flexible Nylons
Flexite plus
Flexible Nylons
Flexite plus
PLUS POLYAMIDE NYLON ( Flexite )
FLEXITE PLUS
- Chemical family (Polyamide Nylon)Comparable with Valplast but more Flexible and color stable
thenValplast
Characteristics
1. Unbreakable
2. Bio Biompatible
3. Can be added and repaired in non flexible areas with Rapid set andusing Aaron Alfa as a adhesive
4. Can be relined and added mayor areas by re injecting and usingRepair liquid as an adhesive
6. Requires less precision in the design and block out of undercut areasdue its flexibility.
7. Designs are mostly tissue supported
8. Can add esthetic claps using Clasp Eze and Aaron Alfa as anadhesive
9. Variety of shades and three ethnic colors(Lt. Pink, Dk. Pink, Translucent Pink, Con pink, Clear
translucentEthnic Brown, Purple Meharry, and Coe Ethnic Moderate )
Plus Large ( Flexite )
Price
+
100517
Code
FLEXITE - Plus Translucent Con Large ea - 1 Cartridge - (25mm Diameter / 1in diam. )...
Name
US$ 6.75
+Info
101085
FLEXITE - Plus Ethnic Brown Large ea - 1 Cartridge - (25mm Diameter / 1in diam. )...
US$ 6.75
+Info
1020155
FLEXITE - Plus Translucent Pink Large ea - 1 Cartridge - (25mm Diameter / 1in diam. )...
US$ 6.75
+Info
102110
FLEXITE - Plus Dark Pink Large ea - 1 Cartridge - (25mm Diameter / 1in diam. )...
US$ 6.75
+Info
102167
FLEXITE - Plus Light Pink Large ea - 1 Cartridge - (25mm Diameter / 1in diam. )...
US$ 6.75
+Info
103432
FLEXITE - Plus Clear Trans Large - 1 Cartridge - (25mm Diameter / 1in diam. )...
US$ 6.75
+Info
Plus Medium ( Flexite )
Price
+
101084
Code
FLEXITE - Plus Ethnic Brown Medium ea - 1 Cartridge - (25mm Diameter / 1in diam. )...
Name
US$ 5.75
+Info
101301
FLEXITE - Plus Clear Trans Medium ea - 1 Cartridge - (25mm Diameter / 1in diam. )...
US$ 5.75
+Info
101990
FLEXITE - Plus Con Translucent Pink Medium ea - 1 Cartridge - (25mm Diameter / 1in diam. )...
US$ 5.75
+Info
102095
FLEXITE - Plus Dark Pink Medium ea - 1 Cartridge - (25mm Diameter / 1in diam. )...
US$ 5.75
+Info
102166
FLEXITE - Plus Light Pink Medium ea - 1 Cartridge - (25mm Diameter / 1in diam. )...
US$ 5.75
+Info
102307
FLEXITE - Plus Translucent Pink Medium ea - 1 Cartridge - (25mm Diameter / 1in diam. )...
US$ 5.75
+Info
Flexible Nylons
G. Flexible Mat. GFM
21/05/2010 / 1284
103
Flexible Nylons
FLEXIBLE MAT ( GFM )
Flexite Mat Large
Price
+
103871
Code
GFM - GFM Standard Pink Large ea -25mm/ 1in Diam [ 300 celcius 11 minutes ]
Name
US$ 5.00
+Info
103872
GFM - GFM V-Plast Large ea -25mm/ 1in Diam [ 300 celcius 11 minutes ]
US$ 5.00
+Info
103873
GFM - GFM Clear Large ea -25mm/ 1in Diam [ 300 celcius 11 minutes ]
US$ 5.00
+Info
Flexite Mat Medium
Price
+
101667
Code
GFM - GFM Standard Pink Medium ea -25mm/ 1in Diam [ 300 celcius 11 minutes ]
Name
US$ 4.00
+Info
101668
GFM - GFM V-plast ...
US$ 4.00
+Info
103870
GFM - GFM Clear Medium ea -25mm/ 1in Diam [ 300 celcius 11 minutes ]
US$ 4.00
+Info
100715
GFM - AcetalTooth Color A2 Medium ea - (25mm diam - for TCS & Valplast machine]
US$ 4.00
+Info
Flexible Nylons
Lubricant for Flexibles
FLEXITE- 102118 G623 cartridge lubricant
US$ 17.00
G623 cartridge lubricant - each
Flexible Nylons
Polishing prods for Flexibles
ECCO- 102488 ECCO Pink Shine 320gr
US$ 17.00
ECCO-Shine Pink Shine 320gr For best use this compound after the tripoli - Use this material and expect
excellent results -
ECCO- 102489 ECCO Trippoly 2lb
US$ 11.00
ECCO Trippoly 2lb For best use this compound after the tripoli - Use this material and expect excellent results -
FLEXITE - 101825 Greenbar Polish 2.5lb
US$ 22.50
Greenbar Polish - 2.5lb - compound for Flexibles like flexite valplast and tcs - --- [ Pulir- Pulido- Lustre ]
104
21/05/2010 / 1284
Flexible Nylons
FLEXITE- 102091 Flexite Liquid Polish 60ml
US$ 17.00
Flexite Liquid Polish- for high shine flexibles like Flexite Valplast and Tcs ] [cartridges] - Pulido- Lustre. ]
CFS - 216106 Pink Shine 245gr
US$ 26.91
Pink Shine 245gr - For best use this compound after the tripoli - Use this material and expect excellent results -
Flexible Nylons
Preformed Acetal Clasps
PREFORMED ACETAL CLASPS
*Sheet of 12 clasps
*Can be added to flexite plus. supreme and regular acrylic using adhesive aron alfa
Price
+
101997
Code
FLEXITE - Eze Pink 12 clasps
Name
US$ 35.00
+Info
101999
FLEXITE - Eze Clear 12 clasps
US$ 35.00
+Info
103409
FLEXITE - Eze Tooth Color Shade 66 12pk
US$ 41.00
+Info
103408
US$ 41.00
+Info
101998
US$ 41.00
+Info
Flexible Nylons
Repair material for flexibles
FLEXITE - 100910 Rapidset Clear Fine Powder 8oz
US$ 25.00
Rapidset Clear Fine Powder Acrylic ADD ON PLASTIC FOR ADITIONS To Flexible Partials In Non-Flexing Areas - 8oz
FLEXITE - 102085 Rapidset Ethn Fine Powder 8oz
US$ 25.00
Rapidset Ethnic Fine Powder Acrylic Add On Plastic For Additions To Flexible Partials In Non-Flexing Areas [Reparacion En Frio Polvo]
FLEXITE - 102084 Rapidset Pink Fine Powder 8oz
US$ 25.00
Rapidset Pink Fine Powder Acrylic ADD ON PLASTIC FOR ADITIONS To Flexible Partials In Non-Flexing Areas [ Needs #221 Aron
Alfa ]
Glass Beads
21/05/2010 / 1284
105
Glass Beads
GLASS BEADS ( Ecco )
- Available in 50mic and 80mic
- Weight: 5lb, 25lb, and 50lb
- Glass beads are used to divest chr. cobalt- non prec. C&B all oys. - and all ceram ic
cases
- May also be used to polish chr. cob. framework
- Packaged to prevent moisture absorption
Price
+
101412
Code
ECCO - Glass beads 50 mic 5lb/2Kg
Name
US$ 19.00
+Info
100917
US$ 105.00
+Info
101413
US$ 19.00
+Info
Grinder Polishers
Automatic spindles
DEMCO-106-DS1 DS1 Auto Spindle for
E-96
US$ 350.00
DS1 (E96) Demco Automatic Spindles for E-96 -- husillo only --[embrague muneco alta velcocidad Usillo ] clutch
ECCO - 102453 ECCO Spindle for Alloy Grinder
US$ 310.00
ECCO Automatic Spindle for E96 and Ray Foster - Replacement spindle for alloy grinders only -Compatible
with all major alloy grinders: Demco - Ray Foster - etc - [embrague muneco alta velcocidad Usillo ] clutch
RAY FOSTER - 101705 High Speed Auto Spindle - NEW
US$ 320.00
High Speed Automatic Spindle - for new AG03 & AG05 - [R# F031 ] only clutch
RAY FOSTER - 101704 High Speed Automatic Spindle
US$ 320.00
High Speed Automatic Spindle -AG03 & AG05 [R# F030 ] only clutch
Grinder Polishers
Complete Units
106
21/05/2010 / 1284
Grinder Polishers
Complete Units
RAY FOSTER - 101581 AG03 Alloy Grinder 110v
US$ 796.50
RAY FOSTER AG03 ALLOY GRINDER 110V
*Alloy Grinder W/ Spindle
*110V
*50/60HZ
*1-4HP
*Dimensions: 10-1/4 x 11-3/4 x11in
*Weight 33LB
*10000-240000RPM
*Heavy Duty
*Enclosed Housing
*2.5in Suction Port for Connection to Dust Collector
*Power Output Connection for Automatic on/Off Dust Collector
*Motor is UL Recognized
*CSA Certified
RAY FOSTER - 101697 AG04 Alloy Grin. w/dust 110v
US$ 1,082.70
- Grinder/polisher 10000 and 24000rpm belt controlled speeds
- Heavy duty 1/3 HP capacitor start motor in a totally enclosed housing
- Self contained dust collector - - motor is UL- recognized and CSA-certified for electrical saftey - 110v - 50/60Hz - Width: 12in [304mm] - Length 18in[457mm] - Height 11in [279mm]
- Shipping Weight 46lbs
RAY FOSTER - 101699 AG05 Alloy Grin Var.Speed 110v
US$ 1,082.00
- Variable Speed with Automatic Spindle.
- Grinder/polisher variable spped control up to 26000RPM - heavy duty 1/4 HP in a totally enclosed housing
- 2.5in [63.5mm] suction port for connection to dust collector.
- Power output connection for automatic on/off dust collector - new compact design - motor is ULrecognized and CSA-certified for electrical saftey.
- 110v - 50/60Hz - Width: 10.25in [260mm] - Length 11.75in[298mm] - Height 11in [279mm] Shipping
Weight 31lbs.
DEMCO -106-B1 B1 Grinder Var. Speed 110v
US$ 1,160.86
DEMCO B-1 POLISHER/GRINDER
- Alloy Grinder (115 Volt)
- Variable Speed - fully automatic spindle
- 2 high intensity lights of work area
- Tinted safety glass for visual protection
- Size- 11 5/16 wide- 9 1/4high
- Available in both 115 volt (B1) and 230 volt (B1-230) models.
DEMCO-106-E96 E96 Grinder 2 peed 110v
US$ 878.00
DEMCO E-96 ALLOY POLISHER/GRINDER 110V
*110V
*Polisher/Grinder
*2 Speed Motor
*W/O Dust Collector*Finnish Gold or Chrome on Same Machine
*Fully Automatic Spindle
*Liminates Slippage To High
*Intensity Lights Provide Excellent Illumination
*Tinted Saftey Glass
*Screen Suction Port
*Shipping Weight 34LB
21/05/2010 / 1284
107
Grinder Polishers
Parts for polishers and grinde
Grinder Polishers
RAY FOSTER - F106 Collet for Grinder - Chuck-
US$ 21.00
Ray Foster Collet for grinder (Only Chuck) 3/32 For Automatic Spindle - [ Mordaza Mandril Chuck solo la una ] - replacement parts -
DEMCO-106-S12A DS1 & S1B- Chuck only
US$ 24.00
Demco D-S1 & S1-B- Collect (Only Chuck) 3/32 (4-Cut) For Automatic Spindles [ Mordaza Mandril Chuck solo la una ]
Gypsums and accesories
Die Stones Natural
DIE STONE ( Pemaco )
- Available in 25lb and 50lb
- A fine hard- accurate stone recommended for models- crown and bridge- casts and dies
- Comparable with Die Rock
- 25cc - 100 grams
- 9 - 11 minutes initial set
- With a compression strength of up to 5-400 lbs.
- PSI/37.23 MPA
- After 1 hour - up to 11-500 lbs.
- PSI/79.29 MPA dry
PEMROCK
- A fine hard, accurate stone recommended for models, crown and bridge, casts and dies.
- Physical Properties: 25cc - 100 grams, 9 - 11 minutes initial set, with a compression strength of up to 5,400 lbs. PSI/37.23 MPA after 1 hour and up to 11,500 lbs. PSI/79.29 MPA dry.
- Available in Pink and Canary
Price
+
101520
Code
PEMACO - PEMROCK 25 lb Pink --- A fine hard- accurate stone recommended for models- crown...
Name
US$ 25.28
+Info
101522
PEMACO - PEMROCK 25 lb Canary --- A fine hard- accurate stone recommended for models- cro...
US$ 25.28
+Info
101521
PEMACO - PEMROCK 50 lb Pink --- A fine hard- accurate stone recommended for models- crown...
US$ 37.76
+Info
101523
PEMACO - PEMROCK 50 lb Canary --- A fine hard- accurate stone recommended for models- cro...
US$ 37.76
+Info
REGAL STONE
- A hard die stone formulated for master models, fixed bridge models, inlay dies and study models.
- Physical Properties: 23cc - 100
grams, 10 - 12 minutes initial set, with a compression strength of up to 6,200 lbs. PSI/42.75 MPA after 1 hour - and up to 14,000 lbs.
- PSI/96.53 MPA dry.
- Available in Peach
Price
+
101518
Code
PEMACO - REGAL DIE 25lb Peach --- hard stone formulated for master models- fixed bridge ...
Name
US$ 26.56
+Info
101519
PEMACO - REGAL DIE 50lb Peach --- hard stone formulated for master models- fixed bridge ...
US$ 40.64
+Info
ROYAL STONE
- An extremely hard die stone with long flowing time for inlay dies by the indirect method, fixed bridge work, master and study models.
108
21/05/2010 / 1284
Die Stones Natural
- Not recommended for use with liquid hardeners.
- Physical Properties: 21cc - 100 grams, 10-12 minutes initial set, with a compression strength of up to 7,500 lbs. PSI/51.71 MPA after 1 hour and up to 16,000 lbs. PSI/110.3 MPA dry.
- Available in Green, Blue, Pink and Cream
Price
+
101514
Code
PEMACO - ROYAL ROCK 25lb Green --- extremely hard die stone with long flowing time for ...
Name
US$ 35.36
+Info
101515
PEMACO - ROYAL ROCK 25lb Blue--- extremely hard die stone with long flowing time for in...
US$ 35.36
+Info
101516
PEMACO - ROYAL ROCK 50lb Blue--- extremely hard die stone with long flowing time for in...
US$ 54.56
+Info
101517
PEMACO - ROYAL ROCK 50lb Green --- extremely hard die stone with long flowing time for i...
US$ 54.56
+Info
Lab Plasters
LAB PLASTER ( Pemaco )
- White
- A fine low expansion plaster
- Recommended for models- casts and flasking
- 47cc
- 100 grams
- With a compression strength of up to 2,300 lbs.
- PSI/15.86 MPA after 1 hour - up to 3,500 lbs.
- PSI/24.13 MPA dry
Price
+
101532
Code
PEMACO - MODEL PLASTER 25lb White
Name
US$ 19.84
+Info
101533
PEMACO - MODEL PLASTER 50lb White
US$ 30.40
+Info
FAST LAB PLASTER ( Pemaco )
Same properties as listed above except - Inital set time: 4-6min
Price
+
105035
Code
PEMACO - FAST MODEL PLASTER 25lb White
Name
US$ 19.84
+Info
105036
PEMACO - FAST MODEL PLASTER 50lb White
US$ 30.40
+Info
Price
+
Lab Stones
LAB STONE ( Pemaco )
- Available in 10lb, 25lb and 50lb
- A fine all purpose stone compounded to produce smooth- strong casts
- Comparable with Quickstone
- 30cc - 100 grams
- Compression strength of up to 4-000 lbs.
- PSI/27.58 MPA after 1 hour - up to 8-500 lbs.
Code
21/05/2010 / 1284
Name
109
Lab Stones
101525-10
PEMACO - LAB STONE 10lb Buff
US$ 14.00
+Info
101525
US$ 30.72
+Info
101524
US$ 20.00
+Info
Plastic die materials and epox
ADS - 101677 Bulk Pack Epoxy Kit
US$ 43.00
- Stock only 1 bulk kit and use it for all the size pours you need.
- No waste. Comes complete with al the items you need to make a perfect pour.
- Kit even contains a mold release.
- Resin and Hardener are perfectly matched so you never have left overs and waste.
- Easy to store, convenient and long shelf life.
- Easy to use kit.
- 2 lbs
- Resin & Hardener
- Eez-Off Mold Release
- 2 syringes
- Mixing sticks cups
- Instructions
- Save lots of money
Pourable Base Stone
POUR BASE STONE ( Pemaco )
- A very hard die stone formulated to pour almost like water
- When it sets its hard like a type IV die stone
- Set time 11-1/2 - 13 minutes
- Approximately 5-7 minutes of working time
- start to mix 24cc - 100 grams
- PSI / 33.4 MPA
- After 1 hour - up to 7-400 lbs.
- PSI / 51.02 MPA dry
Price
+
101526
Code
PEMACO - POUR BASE STONE 25lb Blue
Name
US$ 32.00
+Info
101528
PEMACO - POUR BASE STONE 25lb Grey
US$ 32.00
+Info
101527
PEMACO - POUR BASE STONE 25lb Peach
US$ 32.00
+Info
101529
PEMACO - POUR BASE STONE 50lb Blue
US$ 49.76
+Info
101531
PEMACO - POUR BASE STONE 50lb Grey
US$ 49.76
+Info
101530
PEMACO - POUR BASE STONE 50lb Peach
US$ 49.76
+Info
Synthetic Die Stones
110
21/05/2010 / 1284
SYNTHETIC STONES ( Pemaco )
- Drop ship from factory location warranties you fast delivery
- Comparable with Resin-Rock - Fujirock- Milestone
- PSI/62.05 MPA after 1 hour - up to 18-000 lbs.
- Expansion .070 - .075 after 2 hours.
- 19cc to 100 grams.
- 6-1/2 - 8-1/2 minutes initial set
Price
+
101512
Code
PEMACO - SATIN STONE 25lb Tan color
Name
US$ 41.12
+Info
101513
PEMACO - SATIN STONE 50lb Tan color
US$ 65.60
+Info
Handpieces for Clinic
Contrangle parts
ECCO - 103937 1.1 Contrangle Sheath only
US$ 47.00
ECCO 1.1 Contrangle Sheath only - Fully compatible with NSK NACY - Can be used with originsal NSK parts -
Handpieces for Clinic
Parts
ECCO - Wrench bur changer for ECCO
US$ 3.00
Wrench bur changer for ECCO Handpieces
Hanging Motors
Accesories for Hanging Motors
FOREDOM - 100974 C.FCT Foot Control 110volt
US$ 36.75
C.FCT Foot Control for Series SR Motors with 110volts- Made of heavy duty plastic with durable solid state electronics- the
ergonomics allow precise & relaible speed control with your foot- - for use with 115 voltz- Series- SR- SRB-SRH-SRBH- motors
FOREDOM - 100973 S-77 Sheath for most Motors
US$ 13.65
S-77 Sheath for most Motors standard Outer Sheath that comes equipped on all motors- SR 1/6 HP- - additional Neoprene Sheaths
can be ordered #77N- no good for Series- LX - L - PGX - PG - EE - F- motors- [ tripa motor colgante]
Hanging Motors
Complete sets
21/05/2010 / 1284
111
Hanging Motors
Complete sets
FOREDOM- 100972 1/6 HP SR Motor & FCT- w/o HP
US$ 200.00
1/6 HP HANG UP STYLE - SR Motor with FCT speed - 110 voltz
- FCTspeed foot control with standard 39in long felxible shafts and sheaths for any foredoms 20+ quick disconnect
hand pieces
- Motor is ball bearing & operates at speeds up to 18-000rpm with additional reverse capability for greatercontrol of
the tool- right or left handed- 2 year warranty
- HANDPIECE NOT INCLUDED
FOREDOM - 101889 5200 1/6 SR MOTOR KIT+2 Hndpce
US$ 363.00
5200 1/6 SR MOTOR KIT - 110volts - Includes - 2 Handpieces
- New 1/6 SR motor - 18000 rpm - SCT control - H44T handpieceand H28 Handpiece with 3/32
- 1/8 and 1/4 collets - also comes with 53 accesory kit (47 pieces assortment with 3/32[2.35mm]1/8 and 1/4 shank
accesories standard 39 inches Key tip that fits all Foredom handpieces [ hanging motor ]
- Motor colganteForedom con pieza de mano con enganche rapido pedal y tripa
FOREDOM - 100928 5240 1/6 SR MOTOR KIT+1hndpce
US$ 276.95
5240 1/6 SR MOTOR KIT- 110v- New 1/6 SR motor - 18000 rpm - FCT control
- H44T handpiece with 3/32 - 1/8 and 1/4collets - also comes with 53 accesory kit ( 47 pieces assortment with 3/32[2.35mm] 1/8
and 1/4 shank accesories ) - CSA shaft included
- Standard 39 inches Key tip that fits all Foredom handpieces [ hanging motor ]
- Motor colgante Foredom con pieza demano con enganche rapido pedal y tripa
FOREDOM - 101883 SR-FCT 1/6 HP SR Series + H44T
US$ 200.10
SR-FCT 1/6 HP SR Series -110volts
- Includes - Motor + 39in shaft + foot copntrol + H44T handpiece - 18.000 rpm- Reversiblerun - 110volts - 2 years warranty - great
for general use application -
FOREDOM - 101906 TX-TXR 1/3 HP TX Series + H44T
US$ 307.00
TX-TXR 1/3 HP TX Series
- 110volts - Includes - Motor + 39in shaft + sheath + foot control + H44T handpiece
- 1500 rpm-110volts - 2 years warranty - works with any of foredoms quick disconnect handpieces -
FOREDOM - 101908 TXH-TXR 1/3 HP Heavy D + H44T
US$ 332.00
TXH-TXR (Heavy Duty) 1/3 HP TXH Series
- 110volts - Includes - Motor + 63in long square shaft + heavy dutyprotective sheath + foot control + H44T Square
Drive handpiece
- 15.000 rpm- 110 volts - 2 years warranty
-Thisheavy duty motor series [TXH ] work only with square drives handpieces -heavy duty shafts and sheaths -
Hanging Motors
Parts for hanging motors
FOREDOM - 101452 Ball Bearing #18 Hndpce 1F&1R
US$ 19.00
Set of Ball Bearings for #18 Handpiece - one rear and one front ball bearing in a set [F# HP10718 HP10712 ]
MSMK - 100967 Maint. Kit for 1/6HP 110/220V
112
US$ 16.32
21/05/2010 / 1284
Hanging Motors
Maintenance Kit for 1/6 HP Series- SR-SRM-SRB Motors- 110/220voltz- Kit includes inner shaft- pair of motor brushes- grease- operation manual
Heat Sealers
ECCO- 9075240 Imp Heat Sealer 110v
US$ 94.18
Impulse Heat Sealer - 110volts - [K# 9075240 ]
ECCO - 101385 Imp Heat Sealer w/Slitter 110V
US$ 147.00
Impulse Heat Sealer w/ Slitter - 110volts - [K# 9075270 ] -This is the best sealer on the market - It has a
teflon coated sealing surface- variable heating adjustment- 8 inch heating element- witha built in slitting knife Easy to use light weight- fast- and will save you money over the use of premade bags and pouches- comes
with a replacement heating element and teflon guard
Hnadpieces for Laboratories
Turbines for Lab Handpieces
WORLDENT - 106814 Bur insertion tool
US$ 10.50
Air Force Bur insertion tool - replacement part - (ram)
WORLDENT - 106812 Chuck for Handpiece
US$ 40.25
Air Force Chuck for handpiece - replacement part - (ram)
WORLDENT - 106813 Chuck tool
US$ 19.95
Air Force chuck tool - replacement part - (ram)
WORLDENT - 106816 Foot pedal
US$ 74.55
Air Force foot pedal - replacement part - (ram)
WORLDENT - 106810 Handpiece only
US$ 548.00
Air Force Handpiece only - replacement part - (ram)
WORLDENT - 106815 Injection gel lube kit (5/kit)
US$ 33.25
Air Force injection gel lube kit (5/kit) - replacement part - (ram)
WORLDENT - 106811 Turbine cartridge
US$ 229.95
Air Force turbine cartridge - replacement part - (ram)
21/05/2010 / 1284
113
Air Laboratory Handpieces
BUFFALO-009-01000 #220 Air Lab.Turbine Complete
US$ 464.00
#220 Air Turbine Complete w/ Foot Control- Reg- Access. #220 Handpiece- 350-000 Rpm- Fg Size - Turbina
Laboratorio
WORLDENT - 101138 Airforce 300.000HP System Comp
US$ 649.00
- High Performance High Speed Air Handpiece 300,000 rpm
- Sealed Encapsulated
- Turbine Cartridge
- Sleek Ergonomic Tabletop Design
- Unique Built-in Bur Ejection System
- Whisper Quiet Smooth Operation
- No Oil or Oil Mister Necessary
- Automatic Dispensing "Gel-Pod" Lubrication Cartridge
- CE Certified
WORLDENT- 100587 AQUA SPRAY High speed Lab HP
US$ 890.00
AQUA SPRAY High speed Lab HP with cool mist spray. System complete- with pedal - water reservoir - air
pressure regulator with gauge and an on board moisture control. No oil or gel type lubrication needed. No
metal ball bearings. New high temperature Zirconium ceramic bearings that almos never wear out. Sealed
cartridge. - Independant long life chuck [Key micromotor turnina laboratorio handpiece water ] [WORLDENT ]
ECCO - 103828 ECCO Air Lab.Turbine Complete
US$ 425.00
ECCO Air Lab Turbine Complete w/ Foot Control- Reg- Access. Handpiece- 350-000 Rpm- Fg Size - - MADE IN JAPAN - Turbina Laboratorio
ECCO- 101962 ECCO- Lab High Speed HP
US$ 201.55
- Laboratory straight Handpiece - 350.000RPM - 80g
- Especially for laboratory use which is featured suitable for the most efficient high-speed laboratory handpiece
assuring dexterity when operating
- This handpiece is well balanced with high torque designed to meet the demand of up to date dental
laboratory technique of porcelain tooth - adjustment of masticating surfacce of occulsion and plate griding turbine cartridge is for quick change - Made in Japan - Replacement cartridge - ECCO- 101963
Handpieces for Hanging motors
FOREDOM - 100963 #10 Hanging Motor 2.35mm
US$ 158.76
#10 Handpiece for hanging motor - Quick Change bur release use only with 3/32in - 2.35mm - burs - standard hp
burs - rotating lever action that releases and closes to collect for quick changes-pre lubricated ball bearing that dont
need extra lubrication [ pieza de mano para motor colgante con saca fresa y enganche rapido]
114
21/05/2010 / 1284
FOREDOM - 100961 #18 Hanging Motor 2.35mm
US$ 117.60
#18 Handpiece for hanging motor - quick change bur release - use only with 3/32in - 2.35mm - - std hp burs disconnect type Pre lubricated ball bearings that dont need extra lubrication [pieza de mano para motor colgante
con saca fresa y enganche rapido]
FOREDOM - 100962 #20 Hangind Motor 2.35mm
US$ 66.36
#20 Handpiece for hanging motor - Quick Change bur release use only with 3/32in - 2.35mm - burs - std hp burs - has
plastic molded front grip with tapered sides for easy handling- pre lubricated ball bearings that dont need extra
lubrication [pieza de mano para motor colgante con saca fresa y enganche rapido]
FOREDOM- 101390 30T Handpiece 3/32in shank
US$ 58.50
30T Handpiece for hanging motor - accepts accessories with a 3/32 inch shank [F# H30] Now you can change accessories quickly
and easily - permanently lubricated ball bearing - light weight- comfortable plastic barrel - and grip - [ pieza de mano para motor
colgante con saca fresa y enganche rapido ]
FOREDOM- 101389 43T Handpiece - Wrench type -
US$ 59.00
43T Handpiece for hanging motor - Wrench type - same as 44T but one inch shorter - with three collects chucks 3/32 - 2.35mm - 1/8
- 3.18mm - 1/4 - 6.4mm - and pin and chuck wrench. [ Interchangeable - Quick Disconect - type- Pre lubricated ball bearing that
dont need extra lubrication - [ lubrication free ] [ pieza de mano para motor colgante con saca fresa y enganche rapido ]
FOREDOM- 100960 44T Handpiece - Wrench type -
US$ 48.00
#44T Handpiece for hanging motor - Wrench type - with three collects chucks 3/32 - 2.35mm - 1/8 - 3.18mm - 1/4 6.4mm - and pin and chuck wrench. [ Interchangeable - Quick Disconect - type- Pre lubricated ball bearing that dont
need extra lubrication - [ lubrication free ] [ pieza de mano para motor colgante con saca fresa y enganche rapido ]
FOREDOM - 101960 H55A Handpiece
US$ 88.00
H55A Handpiece - 18 degree contra angle - Dimensions: 6-1/8in long x 7/16in diameter - head 9/16in - Handpiece is good for intricate abd
dekicate jobs in awkward and hard-to-reach spots - Comes with handpiece oil in hypodermic dispenser -
Hydraulic Presses
HANDLER - 103360 Deluxe Manual Press 12x6x12in
US$ 297.00
#39 Deluxe Manual Press 12x6x12in Built to give lab technician excellent hand pressing action when trial packing dentures
- Manufactured from 1in steel plate witha 1in diameter acme threaded center screw - Large chrome handle that allow
technician to apply accurate pressure as dicatated by the individual case -
21/05/2010 / 1284
115
Hydraulic Presses
ECCO - 103806 ECCO Hydraulic Press 18x24x14
US$ 695.00
ECCO Hydraulic Press - 18x24x14in - Built to handle 1 to 3 units - stainless steel weight 65lb - Risk free for
operator - Max Pressure 1400PSI - Shipping Dimensions: 18x24x14in - Weight 65lb
ECCO - 101918 ECCO Hydraulic Press 80mm
US$ 410.00
ECCO HYDRAULIC PRESS
*80mm
*Includes Press Gauge
*Built to Handle 1 to 3 Units
*Stainless Steel
*Plate Stroke
*Lifetime Warranty
VH- 100862 VH- Hydraulic Press 4tons
US$ 371.87
VH-Press - Hydraulic Press 3 Flasks
- Capacity: up to 3 flasks at the same time
- Total Control on pressing stages
- Riskfree for operator
- Operating pressure 1.2 tons
- max pressure 4 tons
- Dimensions
- Connecting Rod 23cm
- Force: up to 4 tons
- Gross weight: 15.80 Kg
Made in Brasil - 18 months Warranty
Hydraulic Presses
Hydralic Accessories
116
21/05/2010 / 1284
Hydraulic Presses
HANDLER - 103358 #38A Bench Clamps
US$ 19.35
#38A Bench Clamps
Impresion Materials
Alginates
EGEO - 103692 Gel Plus Cromatic Algin 450Gr
US$ 6.00
EGEO Gel Plus - Dust Free Cromatic Alginate - 450Gr - Perfect reproduction of dental impressions - Color changes
that facilitates preparation without calculating times - Phase Violet: Mixing time - Pink Phase: Bucket fillng time - White
Phase: Imprint Taking time EGEO Gel Plus Dust Free Cromatic Alginate
*450Gr
*Perfect reproduction of dental impressions
*Color changes that facilitates preparation without calculating times
*Precison in the result
Phases:
*Phase Violet : Mixing time
*Pink Phase: Bucket filling time
*White Phase: Imprint Taking time
*Working temperature: 23C +o- 2C
*(at lower temperatures, more working time)
*Mixture: dust 20 gr. + watter 50 cc.
Impresion Materials
Silicone Material
PRESIDENT ( Whaledent )
- One of the most accurate vinyl polysiloxane impression materials available.
- Provides outstanding production & consistent results.
- Tasteless & Odorless
President Cartridges
Price
+
063-C4626
Code
COLTENE WHALADE - Pres Cart Light Body 1 pk
Name
US$ 71.00
+Info
063-C4627
COLTENE WHALADE - Pres Cart Regular Body 1 pk
US$ 71.00
+Info
President Putty
Price
+
063-C4617
Code
COLTENE WHALADE - President Putty Single Pack
Name
US$ 128.54
+Info
063-C4632
COLTENE WHALADE - President Putty Soft Fast Sing
US$ 128.54
+Info
063-C4843
COLTENE WHALADE - President Putty Soft Single Pk
US$ 128.54
+Info
President Tubes
21/05/2010 / 1284
117
Impresion Materials
Silicone Material
Price
+
063-C4667
Code
COLTENE WHALADE - President Tubes Light Body 1pk
Name
US$ 47.71
+Info
063-C4717
COLTENE WHALADE - President Tubes Reg Body 1pk
US$ 47.71
+Info
063-C4767
COLTENE WHALADE - PresidentTubes Heavy Body 1 pk
US$ 47.71
+Info
COLTENE WHALADE-063-C4980 Speedex Light Body Wash
140ml
US$ 48.00
Speedex Light Body Wash - 140ml
COLTENE WHALADE-063-C4970 Speedex Putty 910ml
US$ 128.00
Speedex Speedex Putty - 910ml -
COLTENE WHALADE-063-C4990 Speedex Univers Activator 60ml
US$ 21.04
Speedex Universal Activator - 60ml
Injection Systems Thermo
Parts for Injection units
CFS - 205106 CFS Bronze Disc - Thick
US$ 12.08
CFS Bronze Disc - Thick - Used for proper injection of CFS cartridges both small and medium [C# 205106 ]
CFS - 204106 CFS Bronze Disc- Thin
US$ 10.73
CFS Bronze Disc- Thin - used for proper injection of large CFS cartridges - [C# 204106 ]
CFS - 206106 - 207106 CFS Knock Out Stand & SS Rod
US$ 66.45
Knock Out Stand & SS Rod -This heavy duty rod is used with the knock-out stand. This heavy duty cylinder is
used with the SS rod. - [C# 206106 - 207106 ]
118
21/05/2010 / 1284
CFS - 203106 CFS Melting Cylinder
US$ 60.75
Melting Cylinder - heavy duty stainless steel cylinder fabricated with high precision [C# 203106 ]
GFM - 100315 GFM Heating element 110v
US$ 180.00
GFM Heater element for injection Machine 110volts [calentador resistencia ] { same as Big Shot & Tcs
machine ) - Same part for Sabilex - BitShot - Tcs injection system -
GFM - 101392 GFM Relay 4 Heater element
US$ 42.00
GFM Reley 4 Heater element - with base - - Same part for Sabilex - BitShot - Tcs injection system -
Inection systems
CFS - 200106 CFS Heavy Duty Manual Press
US$ 999.00
CFS Heavy Duty Manual Press only
- 4 securing bolts included
- [C# 200106 ]
- yeilds approximetely 30 cases per day
- this bold sleek design lends itself to easy injections
- includes a 3 year manufactuers warranty -
CFS - 247106 CFS Man Press+Oven 110v
US$ 1,550.00
CFS Manual Press+ Digital Oven
- Includes the Heavy Duty Manual Press
- 4 securing bolts included - [C# 200106 ] and the
- CFS Digital Furnace
- designed to melt flexible products in under 11 minutes - [C# 201106 ]
The manual press yeilds approximetely 30 cases per day - this bold sleek design lends itself to easy
injections
- includes a 3 year manufactuers warranty
- ( shipping details : 24* 12 * 12in - 55 lb )
CFS - 2471061 CFS Man System Press+Oven 110v
US$ 1,700.00
CFS Manual SYSTEM Press Basic + Digital Oven
- Includes the Heavy Duty Manual Press
- 4 securing bolts included - [C# 200106 ]
- 1 Flask - 1 Cylinder
- 2 bronze discs thick
- 1 bronze disc thin
- 1 Nock out Rod and 1 SS Rod - and the
- CFS Digital Furnace
- designed to melt flexible products in under 11 minutes - [C# 201106 ] The manual press yeilds
approximetely 30 cases per day - this bold sleek design lends itself to easy injections
- includes a 3 year manufactuers warranty
- ( Shippiong details : 24*14*12 in - 63 lb )
21/05/2010 / 1284
119
Inection systems
CFS - 2471062 CFS Man System Press
Full Kit
US$ 3,150.00
MANUAL SYSTEM PRESS FULL KIT
*110V
*Heavy Duty Manual Press
*4 Securing Bolts
*1 Flask
*1 Cylinder
*2 Bronze Discs-Thick
*1 Bronze Disc-Thin
*1 Nock Out Rod
*1 SS Rod
* Plus Almost 100 Accessories
*CFS Digital Furnance
*Manual Press Yeilds Approx: 30 Cases Per Day
*3 Year Manufactuers Warranty
*Bold Sleek Design Lends Itself to Easy Injections
GFM - 100129 Full Autom Injec Syst 110vol
US$ 2,250.00
GFM AUTOMATIC INJECTION SYSTEM
*For 25mm diameter cartridges / ( TCS/ Valplast CFS cartridges sizes )
* Automatically does everything :
- Heats the Cartridge: Small, Medium and Large or Big
- Mantains
- Shoots the Injection in one press of a button
Includes :
- Pressing device
- Furnace
- Flask
- Knockout Kit
- Brush
- Twister Specifications : 110volts , can be ordered in 220 volts
*please advice . - Same machine as Bigshot Duracetal - TCS Package dimensions 14 x 21x 26 - 46 lb [ 21 kg ]
GFM -103379 Full Autom Injec Syst 220vol
US$ 2,250.00
GFM Automatic Injection System - 220V - .Automatically does everything. Heats the Cartridge- [ small
-medium and big ] - mantains - and shoots the Injection in one shot - Includes press- Furnace- Flaskknockout kit - Brush- twister -- 220volts - [ (maquina Inyectora machine) Valplast- Lucitone FRS- FlexiteAcetal- Dental D- Duraflex- Acrylics by injection . ] - Nylon Injector - [Same machine as Bigshot Duracetal TCS - Sabilex ] Package dimensions 14 x 21ftx 26 - 46 lb [ 21 kg ] ( Sabilex ) GFM AUTOMATIC
INJECTION SYSTEM
*For 25mm diameter cartridges / ( TCS/ Valplast CFS cartridges sizes )
* Automatically does everything :
- Heats the Cartridge: Small, Medium and Large or Big
- Mantains
- Shoots the Injection in one press of a button
Includes :
- Pressing device
- Furnace
- Flask
- Knockout Kit
- Brush
- Twister Specifications : 220 volts
- Same machine as Bigshot Duracetal - TCS
-Package dimensions 14 x 21x 26 - 46 lb [ 21 kg ]
120
21/05/2010 / 1284
Inection systems
GFM- 100123 Semiaut Injection Syst 110vol
US$ 2,100.00
GFM SEMIAUTOMATIC DIGITAL INJECTION SYSTEM
*Automatically Does Everything BUT Shoot the Pressure
Includes:
*Press - Stainless Steel
*Furnace
*Flask
*Kockout Kit
*Cylinder
*Brushes
*Twister
*Same as TCS
Inlay Resin
DURACRYL - 100427 Duracryl Kit Pattern 55ml/60gr
US$ 15.00
Duracryl Kit - Inlay Pattern Resin - Powder/Liquid 55ml/60gr - Replaces Duralay Resina para patrones de
incrustaciones ( New Stetic ) (replaces Duralay Red )
RELIANCE-2249A Duralay Laboratory KIT 8oz
US$ 78.00
Duralay Laboratory KIT- 8oz. P o w d er- 8oz. L i q u i d & Red - Lubricant - Resin Pattern - Acrilico para
patrones de Fundicion - Rojo Red -
RELIANCE-2249B Duralay Red Powder Only - 8oz
US$ 43.86
Duralay Powder Only - 8oz -Polvo solo - Acrilico Patron Fundicion [ Rojo Red ]
Instruments Clinic
FLEXI TIPS ( Ecco )
- Used for resins
- Non-sticky rubber tips
- Pre-formed anatomical angles
- Makes it easy to work on oculssal anatomy
- Good for clinics and laboratories
Price
+
F531-1
Code
ECCO - Flexi Tips - 5pk - White Small for Resins (composite Instrument ) Kit ( make e...
US$ 35.00
+Info
F511-1
ECCO - Flexi Tips - 5pk - White Medium for Resins (composite Instrument ) Kit ( make ...
US$ 39.00
+Info
21/05/2010 / 1284
Name
121
Instruments Laboratory
INSTRUMENTS ( All Brands )
COMPOSITE INSTRUMENTS
*Used for resins
*Non-sticky rubber tips
*Pre-formed anatomical angles
*Makes it easy to work on oculssal anatomy
*good for laboratories
Price
+
F541-1
Code
ECCO - Flexi Tips Set of 5 Black Small for Resins (composite Instrument ) Kit Flexi Ti...
Name
US$ 35.00
+Info
F521-1
ECCO - Flexi Tips Set of 5 Black Medium for Resins (composite Instrument ) Kit ( make ...
US$ 35.00
+Info
PORCELAIN SCULPTING
*Renfert compatible
*Sold in 5pk
Price
+
100724
Code
ECCO - ECCO Tips Porcelain Sculpturing RED - Renfert compatible - Tip punta para esculp...
Name
US$ 3.00
+Info
100725
ECCO - ECCO Tips Porcelain Sculpturing BLUE - Renfert compatible - Tip punta para escul...
US$ 3.00
+Info
100726
ECCO - ECCO Tips Porcelain Sculpturing YELLOW - Renfert compatible - Tip punta para esc...
US$ 3.00
+Info
Calipers for alloy and wax
ECCO - 100584 Analogic Alloy Caliper Dial
US$ 36.00
ECCO Analogic Caliper Dial- [K#1210005] ideal for alloys - alumina copinas and zirconia structures - Calibre
analogico - Ideal para ajustes de mucha precision -
ECCO -100560 Caliper For Metal
US$ 8.00
ECCO Caliper For Metal - Calibre Metal
ECCO -100559 Caliper For Wax
US$ 8.00
ECCO Caliper For Wax- Calibre cera
122
21/05/2010 / 1284
ECCO - 100795 ECCO Digital thickness gage
US$ 110.00
ECCO Digital thickness gage for alloys- alumina and zirconia copins. [especimetro digital caliper ]
Crown Holders
ECCO - 101749 Crown Master Plier ea
US$ 42.00
Crown Master Holder - No more finger burning !! light weight - Autoclavable - Fiber glass material allows you
to shape the tip according with your needs - Ideal for holding crowns and bridges - Being heat and bend resistant
- it makes it possible to work on the entire occlusal surface and allows for exact smoothing - finishing - and
polishing of all crown surfaces - It prevents accidental injury from flying objects - burns and cuts to the fingers
while adjusting - It eliminates the stress of losing a crown just beore cementation -
ECCO - 100466 Scissor type Crown Holder
US$ 27.00
ECCO Scissor type Crown Holder with diammond - stainless steel - Changeable diamond tips [ Fg typeThere is
no danger of damage to the crown margins when the restoration is gripped securely . ( puntas intercambiables Pinza porta corona - Alicate )
KEYSTONE-034-1620045 Tweezer type Crown Holder
US$ 65.70
Tweezer type Crown Holder - German-made stainless steel - There is no danger of damage to the crown
margins when the restoration is gripped securely . Puntas de Diamante intercambiabloes. Pinza porta corona Alicarte - [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized business in Dental lab
Knifes
ECCO - 100740 ECCO Gritman knife 137mm
US$ 7.50
ECCO Gritman knife - plaster knife /spatula - 5 1/2 long(137mm) [L#kn60 ]
Porcelain Instruments
ECCO - 200161 Handler Sculpt.Tip LIGHT BLUE
US$ 7.00
Handler 4 Porcelain Carver (aluminum ) LIGHT BLUE - Uses 2 Sculpturinjg Tips 051-2203 - [ - mango para Tip para moldear
porcelana ] [A#051-2203] USDD Tips -[espatulas cuchillas para porcelana ]
21/05/2010 / 1284
123
ECCO - 200172 Complete Porcelain Carver
Kit
US$ 59.00
Complete Porcelain Carver Kit
- Kit Includes:
- Hemostats
- Kelly Curved Kelly Straight
- Ceramic Tip and Handles
- Blue Cermaic Carver
- Green Alum Handle
- White Tip - Yellow Tip - Red Tip
- Blades:
- Blade Handle #6
-5pcs Blade #25 - Crown Instruments:
- Metal Calliper
- Synthetic Brushes
- Synthetic Brush #0
- Wax Carver
- Pk Thomas #2 - la Frenier - Beale #7 - Zahle #991[#080-E2 ]
ECCO - 200158 Porcelain Sculpt. Tip BLUE
US$ 5.50
ECCO Tips Porcelain Sculpturing BLUE Soft - Tip punta para esculpir porcelana 051-2103 [espatulas cuchillas para
porcelana ]
ECCO - 200160 Porcelain Sculpt. Tip BLACK
US$ 5.50
ECCO Tips Porcelain Sculpturing BLACK Hard - Tip punta para esculpir porcelana 051-2102 [espatulas cuchillas
para porcelana ]
ECCO - 200159 Porcelain Sculpt. Tip RED
US$ 5.50
ECCO Tips Porcelain Sculpturing RED Hard - Tip punta para esculpir porcelana 051-2104 [espatulas cuchillas para
porcelana ]
ECCO - 200156 Porcelain Sculpt. Tip WHITE
US$ 5.50
ECCO Tips Porcelain Sculpturing WHITE Hard - Tip punta para esculpir porcelana [A#051-2100] [espatulas
cuchillas para porcelana ]
ECCO - 200157 Porcelain Sculpt.Tip YELLOW
US$ 5.50
ECCO Tips Porcelain Sculpturing YELLOW Soft - Tip punta para esculpir porcelana 051-2101 [espatulas cuchillas
para porcelana ]
Wax instruments
ART CANVER ( Bego )
For waxing, Colored Aluminum Handle .
124
21/05/2010 / 1284
Wax instruments
Price
+
105065
Code
BEGO - Art Carver Thomas Instr. Kit
Name
US$ 65.00
+Info
105066
BEGO - Art Carver Thomas Instr. #1
US$ 19.00
+Info
105067
US$ 19.00
+Info
105068
US$ 19.00
+Info
105069
US$ 19.00
+Info
105070
US$ 19.00
+Info
ECCO - 100595 Ceramist Waxer Kit 12 pcs
US$ 28.50
Carver Waxer Kit 12 pcs - 8 interchangable tips & 4 handlers - Stainless steal Leather case - Made in USA
ECCO - 101112 Hollenback Carver
US$ 10.00
Hollenback Carver- [K#1220050-#3][K#1220060-#3S] [J#ca125]
ECCO - 101116 Inlay Carver
US$ 10.00
Inlay Carver - [K#1220070]-# 5 LeCron [J#ca129]
ECCO - 101115 Modified Roach
US$ 10.00
Modified Roach - [K#1220080] [J#ca128] -carver-
ECCO - 102186 Professional Waxer Kit
US$ 33.00
Professional Waxer Kit - includes: Wax knives x 2 - Wax Carvers x 9 -Lab Knife x 1 - Wax Knives - Lessman
Small and Large - Carvers: Gritman#31 - Beale #7 - La Frenier - Pk Thomas 1-5 - Hollenback 1/2 - Lab Knife 6r Professional Waxer Kit
- Includes - Wax knives x 2
- Wax Carvers x 9
- Lab Knife x 1
- Wax Knives
- Lessman Small and Large
- Carvers - Gritman#31
- Beale #7
- La Frenier
- Pk Thomas 1-5
- Hollenback 1/2
- Lab Knife 6r -
21/05/2010 / 1284
125
Wax instruments
ECCO - 101113 Roach Carver
US$ 10.00
Roach Carver- [K#1220090] [J#ca126]
ECCO - 101117 Vehe Carver
US$ 10.00
Vehe Carver - [K#1220100] [J#ca130]
ECCO -101114 Ward #1 Carver
US$ 10.00
Ward #1 Carver - [K#1220110][J#ca127]
Investments
BEGO - 105061 Wiropaint Plus 200ml
US$ 31.00
- Fine investment material for partial denture techniques
- It provides a very smooth casting surface and speeds up finishing work consider-ably.
- Wiropaint plus hardly settles in the bottle and is always ready for use.
Investments
Chrome Investment
BEGOSOL K ( Bego )
- Special mixing liquid (frost-sensitive) for WiroFine, BellaStar XL and BellaCer
- Depending on the alloy and area of application, BegoSol can be mixed with distilled or demineralised water to the
concentration required.
- The higher the concentration of BegoSol, HE or K, the greater the expansion of the investment material.
Code
126
Price
+
105062
BEGO - BEGO-Begosol K Mixing Liquid - 1Liter (B# 51120 ) - Sensitive to frost - for wi...
Name
US$ 29.00
+Info
105063
BEGO - BEGO-Begosol K Mixing Liquid - 5Liter (B# 51121 ) - Sensitive to frost - for wi...
US$ 107.00
+Info
21/05/2010 / 1284
Investments
Chrome Investment
BEGOSOL MIXING LIQUID ( Bego )
- Mixing liquid available in 1Liter and 5Liters
- Mixing liquids for BEGO investment materials
- Depending on the alloy and area of application, BegoSol can be mixed with distilled or demineralised water
to the concentration required.
- The higher the concentration of BegoSol, HE, M or K, the greater the expansion of the investment material.
Price
+
010-51090
Code
BEGO - Begosol Mixing Liquid - 1Liter
Name
US$ 32.54
+Info
102492
BEGO - Begosol Mixing Liquid - 5Liter
US$ 107.00
+Info
102493
BEGO - Begosol HE Mix Liquid - 1Liter
US$ 30.99
+Info
102494
BEGO - Begosol HE Mix Liquid - 5Liter
US$ 107.00
+Info
BEGO-010-51046 Wirovest - Partial Denture
US$ 128.09
- The classic BEGO partial denture investment material.
- Proven worldwide, very smooth surface, for gel and silicone duplication
- Special investment material for gel and silicone duplication with conventional preheating
- Worldwide approx. 40,000,000 partial denture frames fabricated with Wirovest
Investments
Hi Heat investments
BELLASTAR XL ( Bego )
- BellaStar XLThe premium investment material for crowns and bridges
- Extremely fine grain for excellent fitting accuracy.
- Ideal for precious-metal alloys, but also optimally applicable for non-precious alloys.
- Fluid to creamy consistency with optimal flow properties.
- Reliable expansion control with BegoSol K.Outstanding deflasking characteristics, extremely smooth casting
surfaces.
- For conventional or shock-heat processing, set temperature can be final temperature. Can be processed with or
without ring, mould sizes freely selectable
Price
+
105078
Code
BEGO - BEGO-Bellastar-XL - 75x60gr - Investment for high noble alloys - (B# 54360 )
Name
US$ 75.00
+Info
105079
BEGO - BEGO-Bellastar-XL with 2Liters Begosol k - 100x90gr - Investment for high noble ...
US$ 159.00
+Info
105080
BEGO - BEGO-Bellastar-XL Powder Only - 100x90gr - Investment for high noble alloys - (B...
US$ 108.00
+Info
BELLAVEST SH (Bego)
- Bellavest SHShock-Heat, rapidly or conventionally heatable precision casting investment material for crowns and
bridges, also made of pressed ceramics
- Graphite-free, phosphate-bonded precision casting investment material
- Easy to process with the special mixing liquid BegoSol HE
- Great expansion controlSmooth, creamy consistency
- Long processing time of 5 minutes
- Extremely smooth casting surfacesHardens with firm edges and can still be easily deflasked
- Guaranteed shelf life of two years in sealed bagPortion bags easy to tear open
For more information visit our website www.usdentaldepot.com
21/05/2010 / 1284
127
Investments
Hi Heat investments
Price
+
105075
Code
BEGO - BEGO-Bellavest SH with 2Liters liquid - 80x160gr bags - universal investment mat...
Name
US$ 190.00
+Info
105076
BEGO - BEGO-Bellavest SH Powder Only - 80x160gr bags - universal investment material - ...
US$ 138.00
+Info
105081
BEGO - BEGO-Bellavest SH with 2Liters liquid - 100x100gr bags - universal investment ma...
US$ 169.00
+Info
105082
BEGO - BEGO-Bellavest SH Powder Only - 100x100gr bags - universal investment material -...
US$ 129.00
+Info
BELLAVEST T ( Bego )
- Bellavest TGraphite-free crown and bridge precision casting investment material for precious and non-precious metal
applications
- Tried and tested in fitting accuracy and processing.
- Firm edges and easy to deflask. Can only be heated conventionally
- For more information go to our website www.usdentaldepot.com
Code
Name
Price
+
US$ 60.00
+Info
BEGO - BEGO-Bellavest T - 75x60gr bags- C&B investment material - (B# 54209 )
US$ 62.00
+Info
US$ 138.00
+Info
105072
105073
105074
MULTI-FUNCTIONAL INVESTMEN ( Vest-All )
Multi-Functional Phosphate Bonded Investment
Price
+
505100
Code
VEST ALL - Vest-All 100 x 100gm w/ liquid
Name
US$ 123.25
+Info
505150
VEST ALL - Vest-All 70 x 150gm w/ liquid
US$ 123.25
+Info
506100
VEST ALL - Vest-All100 x 100gm w/o liquid
US$ 111.65
+Info
506150
VEST ALL - Vest-All70 x 150gm w/o liquid
US$ 111.65
+Info
505010
VEST ALL - Vest-All Special Liquid 16oz
US$ 9.07
+Info
Investments
Rapid Fire High Heat
GOOD EARTH ( Niranium )
Code
128
Name
Price
+
US$ 32.80
+Info
NIRANIUM - Good Earth 100 lb Powder Only
US$ 46.03
+Info
NIRANIUM - Good Earth 100 lb w/liquids
US$ 143.91
+Info
NIRANIUM - Good Earth Bind&Liq A Only 1ga
US$ 48.73
+Info
102438
NIRANIUM - Good Earth 50lb Powder Only
102437
101360
102439
21/05/2010 / 1284
Investments
BEGO - 105077 Wirofine Investment 45x400gr
US$ 135.00
- Universal investment material for all applications in partial denture and combination technique, for gel and
silicone duplication
- Fine model surfaces even with gel duplication; no hardening necessary with silicone duplication.Ideal flow
properties ensure easy handling.
- Very good fit, high edge strength ideal for combination work.
Lab Pans for laboratories
LAB WORK PANS ( Ecco )
Price
+
102322
Code
ECCO - Lab Pans 7x5in Yellow 12pk
Name
US$ 21.00
+Info
103705
ECCO - Lab Pans 7x5in Red 12pk
US$ 21.00
+Info
Lab pans witrh clips
Lab Work Pans ( Keystone )
Price
+
034-7000517
Code
KEYSTONE - Lab Work Pans - Purple 12 pk
US$ 22.00
+Info
034-7000378
KEYSTONE - Lab Work Pans - Grey 12pk
US$ 22.00
+Info
034-7000377
KEYSTONE - Lab Work Pans - Beige 12pk
US$ 22.00
+Info
034-7000376
KEYSTONE - Lab Work Pans - Pink 12pk
US$ 22.00
+Info
034-7000375
KEYSTONE - Lab Work Pans - Green 12pk
US$ 22.00
+Info
21/05/2010 / 1284
Name
129
034-7000374
KEYSTONE - Lab Work Pans - White 12pk
US$ 22.00
+Info
034-7000373
KEYSTONE - Lab Work Pans - Yellow 12pk
US$ 22.00
+Info
034-7000372
KEYSTONE - Lab Work Pans - Red 12pk
US$ 22.00
+Info
034-7000371
KEYSTONE - Lab Work Pans Blue - 12pk
US$ 22.00
+Info
LAB WORK PANS (Handler)
Price
+
103330
Code
HANDLER - #19L Work Pan - Large
Name
US$ 23.35
+Info
103331
HANDLER - #19XL Work Pan - XLarge
US$ 25.15
+Info
Lab. Accesories
HANDLER - 103831 #216 Rubber Blow Gun
US$ 29.35
#216 Rubber Blow Gun- 3-1/16x5/8in - [ blow-off nozzle ] A rubber air blowgun for table top and bench use Connects to
standard 1/4in NPT air line and activates with bending movement of rubber nozzle - Weight 1lb
HANDLER - 103830 #217 Push Button Blow Gun
US$ 34.79
#218 Push Button Blow Gun -3-1/2x1-5/8x13/16in - [ blow-off nozzle ] Metal nickel plated blow gun activated by depressing lever
located on top of gun - Connects to standard 1/4in NPT air line - Weight 1lb
HANDLER - 103829 #218 Lever Blow Gun
US$ 36.75
#218 Lever Blow Gun - 4-3/16X2X1-1/8in - [ blow-off nozzle ] Metal nickel plated blow gun activated by depressing lever located
on top of gun - Connects to standard 1/4in NPT air line - Weight 1lb
ECCO - 010-21700 Blow-Off Nozzle
US$ 27.55
Blow-Off Nozzle - Air gun made in germany - [ jeringa de aire boquilla ]
KEYSTONE -102798 Versa-Lock wings 1 pair
US$ 29.00
Versa-Lock Sublingual premanufactured retention wings - 1 pair
Laboratory Equipment
Cabinets for Laboratory
HANDLER - 103519 #241 Double Door Cabinet
US$ 1,421.00
- 241 Double Door CabinetA 35 [90cm] wide double door cabinet built of heavy gauge sheet steel and covered with
Resistop work surface.Full size doors provide complete access to enclosed area.
- Finished in durable, baked coating.SIZE: 35 wide x 23 deep x 36 3/4 high [89cm x 58cm 93cm] to work surface.
- Shipped with 6 Backsplash, may be ordered with 6 Riser option.
- Shipping Wgt.: 185 lbs. [83.9 kg]
- Unit Dimensions: 35 wide x 23 3/4 deep x 36 3/4 high [89cm x 58cm 92cm]
130
21/05/2010 / 1284
HANDLER - 103520 #243 Single Door Cabinet 24in
US$ 1,225.00
Feature
- A 24 [61cm] wide single door cabinet built of heavy gauge sheet steel with Resistop top
- Full sized door allows complete access to inside of cabinet
Dimensions
- 24 1/8 wide x 29 depth x 36 3/4 high [61cm x 74cm x 93cm] to work surface
- Shipped with 6 Backsplash, may be ordered with 6 Riser option
- Shipping Wgt. - 130 lbs. [59 kg]
- Unit Dimensions: 24 1/8 wide x 23 3/4 depth x 36 3/4 high [61cm x 63cm x 92cm]
HANDLER - 103521 #245 Single Door Cabinet 18in
US$ 1,127.00
Feature
- An 18 [46cm] wide single door cabinet constructed of heavy gauge sheet steel with Resistop work surface.
- Complete access to cabinet interior is afforded by full size door
- Cabinet finished in a durable, baked finish
Dimensions
- 18 1/8 wide x 23 depth x 36 3/4 [46cm x 58cm x 93cm] to work surface
- Shipped with 6 Backsplash, may be ordered with 6 Riser option
- Shipping Wgt - 115 lbs. [52.2 kg]Unit Dimensions: 18 1/8 wide x 30 depth x 36 3/4 [46cm x 76cm x 92cm]
HANDLER - 103523 #261 Boilout Cabinet
US$ 1,421.00
- The Boilout Cabinet will provide your prosthetics laboratory with years of service at almost 40% savings over
competitive units. Vented cabinet with internal shield
- Available with economical gas or electrical fuel
- Available with faucet to fill tank, heavy duty recirculating pump
- Four faucet washout-tank-turn on walk away de-wax dentures & partials, curing unit-holds 8 two flask compresses-16
flasks, heavy gauge stainless steel-for durability & functionality
- Sinks built into stainless steel top with seamless design
- Marine Edging keeps water from running off work surface, built by Handler in the U.S.A.
- Shipping Wgt - 250 lbs [113.5 Kg]Unit Dimensions: 35 wide x 24 deep x 38 high
HANDLER - 103524 #275 Wall Cabinet
US$ 391.02
- A double sliding door cabinet built to be mounted on the wall
- Cabinet manufactured of heavy gauge sheet steel with adjustable single interior shelf
- Finished in a durable, baked coating. NOTE - Additional shelves available at additional costs
- Shipping Wgt - 100 lbs [45.4 Kg]
- Unit Dimensions: 36 wide x 10 deep x 30 high [91cm x 25cm x 76cm] (with glide-rite doors)
Chairs for Laboratory
21/05/2010 / 1284
131
HANDLER - 103518 #224 Tech Chair
US$ 353.99
- Air technicians chair built with ergonomic details to allow the technician to sit comfortably for hours at a time. This
chair has a contoured seat which is adjustable with the aid of a handle activated air cylinder. Its back is adjustable to
provide continual back support.
- The five leg anti-tip tubular base contains easy glide rollers and a chrome foot support.
- Covered in a heavy gauge grey expanded vinyl, this Tech-Air chair is a welcome addition to laboratories and
industrial locations where employees must sit for extended periods of time.
- The air cylinder has a five year guarantee. It is available in grey from stock or custom colors at an additional charge.
- Shipping Wgt.: 37 lbs [16.8 Kg]
- Unit Dimensions: Seat = 21 wide x 19 deep x 3 thick [53.3cm x 48.3cm x 7.6cm]
- Standard Chair = 19 - 24 1/4 adj. seat height x 18 diameter [61cm - 73.7cm x 45.7cm]
- Various heights available at additional charge.
Lab Equipment Accessories
HANDLER - 103398 Drum Cartridge Retrofit 60C
US$ 244.02
#60FCRETRO Drum Cartridge Retrofit 60C
HANDLER - 103399 Drum Cartridge Retrofit 60C
US$ 253.82
#60FCSEPCRETRO Drum Cartridge Retrofit 60C Special
Laboratory Benches
HANDLER - 103515 #213 Ceramist Bench
US$ 2,145.00
- 213 Ceramist BenchThis seven drawer bench is designed particularly for the ceramist
- In addition to the two larger side drawers which will accommodate large porcelain jars, its side cabinet contains
a hinged door and compartment for a vacuum pump or other accessories
- The side cabinet is shipped for assembly on the right side of the bench.Built of heavy gauge sheet steel, the
Tech-Rite Ceramist Bench is shipped complete with legs, duplex electrical receptacle, suction inlet and
knock-outs for air and gas valves. Finished in baked, durable coating with Resistop tops.
- Specify placement of side cabinet - LEFT or RIGHT
- Shipping Wgt.: 270 lbs. [122.4 Kg]Unit Dimensions: 58 wide x 24 1/2 deep x 32 to work surface [147cm x
62cm x 81cm].Bench contains 58 wide x 6 1/2 deep x 6 high riser [147cm x 17cm x 15.2] mounted rear
HANDLER - 103516 #215 Pedestal Bench
US$ 2,729.00
- 215 Pedestal Bench Size - 42 wide x 49 deep x 32 to work surface [107cm x 124cm x 81cm] with 42 wide x
13 deep x 6 high riser [107cm x 33cm x 15cm] top containing a duplex receptacle, suction inlet and knock-outs
for air and gas valves on both sides. Bench finished in baked, durable coating.
- A two technician pedestal bench contains five drawers for each technician. Benches are mounted face to face,
supported by 42 wide x 17 3/4 deep pedestal with common 13 riser top [107cm x 45cm x 33cm]. Constructed
of heavy gauge sheet steel. Supplied with Resistop tops.
- NOTE - All benches may be combined with additional benches to form a free standing island.
- Shipping Wgt.: 370 lbs. [167.8 kg]Unit Dimensions: 42 wide x 49 deep x 32 to work surface [107cm x 124cm
x 81cm]
HANDLER - 103525 #235 Casting/Soldering Bench
US$ 3,535.00
- 235 Casting/Soldering BenchA seven foot long bench designed for casting and soldering. This bench
consists of one 35 [90cm] double door cabinet, one 24 [61cm] single door cabinet and one 24 [61cm]
single door cabinet with tool area above door lined with transite for placement of torches and tools.
- This cabinets work surface is covered with Resistop material and contains a cut-out with casting
well.Cabinet size: 84 wide x 23 3/4 deep x 36 3/4 high [213cm x 58cm x 93cm] to work surface.
132
21/05/2010 / 1284
Laboratory Benches
Available with 6 [15cm] high riser in lieu of backsplash making bench 29 [73cm] in depth.
- The casting well sits 18 wide and 14 deep [43cm x 36cm]. Constructed of heavy gauge sheet steel and finished in a durable baked coating
- Shipping Wgt - 460 lbs. [208.6 kg] Unit Dimensions: 83 3/8 wide x 24 1/2 deep x 36 3/4 high to work surface [213cm x 62cm x 109cm]
HANDLER - 103517 #215SP Single Pedestal Bench
US$ 1,759.10
- 215SP Single Pedestal BenchFive drawer single technicians bench with Resistop tops. Bench is supported by a
single 14 deep x 42 wide [28cm x 107cm] single pedestal. The single pedestal bench is 42 wide x 24 1/2
deep x 31 3/4 to work surface [107cm x 62cm x 81cm].
- The 215SP contains a 42 wide x 6 1/2 deep x 6 high riser [107cm x 17cm x 15cm] mounted rear with one
duplex receptacle, suction inlet and knock outs for air and gas valves in the vertical riser.
- This bench must
be secured to the wall of the laboratory or installed to the floor as a free standing bench. May be combined with
additional benches to form a free standing or wall mounted island of benches. Constructed of heavy gauge sheet
steel and finished in a baked, durable coating.
- Shipping Wgt.: 190 lbs. [86.2 Kg]Unit Dimensions: 42 wide x 24 1/2 deep x 32 to work surface [107cm x
62cm x 81cm]
HANDLER - 103522 #253 Corner Cabinet
US$ 1,563.10
- A single door corner cabinet designed to be placed in a corner or abut adjacent 32 [81cm] high technician
benches. Built of heavy gauge sheet steel with Resistop and coated in a durable, baked finish.
- Shipped with 6 Backsplash, may be ordered with 6 Riser option. Wall side - 32 [81cm], abutment side - 22
[56cm], door side - 14 [35.5cm], Height - 31 [79cm]. Shipping Wgt.: 165 lbs. [74.8 kg]
- Unit Dimensions: 32 long x 23 3/4 deep with backsplash x 32 high [81cm x 61cm x 81cm]
HANDLER - 103532 #575 Bench Top Polish No Lathe
US$ 1,029.00
- Multifunctional bench top polishing unit.
-Complete bench top polishing system comes with the heavy gauge, steel, powder coated cabinet, two
suction motors & cartridge filters, two florescent lights, two duct collection trays, two insert pans and a 26A
Red Wing Polishing lathe. Each suction motor delivers a powerful 225cfm, collects 0.5 microns of dust and
larger particles, easy access to reusable, replaceable pleated rear cartridge filter
- Replaceable, adjustable clear acrylic shield protects user from debris, and can be set at different heights
to accommodate user sitting down or standing up, baked on durable powder coating with bright florescent
lighting, arm rests for comfortable, sustainable operation.
- Designed & Built by HANDLER in the U.S.A Affordably priced significantly lower than other competitve
units. Easy operation for dry grinding, or polishing with pumice using the splash hoods.
- Powerful suction system protects user with safer, healthier environment. Helps to meet OSHA standards Shipping Weight: 115 lbs Unit Dimensions: 30 1/2"wide x 16" high x 21" deep
- Without a 26A Red Wing polishing lathe
HANDLER - 103531 #575 Bench Top
Polish w/lathe
US$ 1,185.00
- Same description than item above HANDLER - 103532 #5750 Bench
Top Polish No Lathe
- Additional feature - Come with a 26A Red Wing polishing Lathe
HANDLER - 103486 Pol/Grind Unit w/ Cat NO MOTOR
US$ 2,263.80
- 75D-0 Polishing Grinding unitThis unit is identical to the 75D polishing unit, EXCEPT that it is WITHOUT a polishing motor. If the
technician has a comparable polishing motor, it may be mounted onto the work surface of the 75D-0.
- Two ever-brite aluminum polishing hoods with pumice insert pans and safety shields are mounted to the table top. As with the
75D, collected dusts and debris are shaken from the filter bags and into a lower cabinet tray for collection and disposal into a waste
container.
- Suction Motor - 3/4 HP, 115 Volts/60Hz. Suction Capacity - 600 CFM (cubic feet/minute) [283m3/min.] Filter Area - 62 sq. Ft., 24
shakeable Cloth Filter Bags. Cleaning - External foot shaker, internal cabinet dust tray.
- Shipping Wgt.: 325 lbs [147.4 Kg] Unit Dimensions: 56 high x 32 wide x 24 deep. Work surface 40 to table top [142cm x 81cm
x 61cm]
FOR THE NEW MODEL # 75DFC-0 - ASK FOR ADDITIONAL DETAIL
21/05/2010 / 1284
133
Laboratory Benches
HANDLER - 103533 Modern Workstation
US$ 3,059.00
#TUX007 The Ultimate Extreme Modern Workstation TUX007 The
Ultimate Extreme Modern Work Station
Handler Introduces an American Ingenuity European-Styled
Ergonomic Lab Bench
with Ultimate User Comfort
*Manufactured of steel in the USA with a variety of powder coated
paint finishes:
*Warm Gray, Colonial White, Designer Beige, Eagle White, Blue
Heaven, Charcoal, Merlot.
*American Ingenuity and affordability with European styling and
ergonomic design.
* The TUX bench comes complete with:
Wide screen flat panel monitor
*Data port
*iPod jack
*Ear phone jack Suction
*In drawer inlet with safety shield and magnifier
*Duplex electrical outlets which are pre-wired to a 110 volt three
prong cord
*Gas valve
*Air valve with air hose and air gun
*Florescent task lighting
*work shelf
*six drawers
*Unit can be reversed and built with four drawer cabinet on the right
Model: TUX007
HANDLER - 103534 Modern Workstation
No Monitior
US$ 2,982.00
#TUX0070 The Ultimate Extreme Modern Workstation - No Monitior
HANDLER - 103393 Reg Pol Unit Tap/Shaft Cart Un
US$ 1,615.95
#60FCTS Regular Polishing Unit Tap/Shaft Polishing Motor with Drum Cartridge Filters - 56xsx18x32in wide 38in shiping
weight 200lbs Contains two 7x10-1/2x14in polishing hoods mounted on either side of #26 1/2HP - two speed red wing polishing
motor - Has a minimum suction capacity of 500CFM - air intake which is channeled through two 12x25x2in fiberglass filters 1200cubic inches of filter area - Not designed for grooving models - Finished in a durable baked coating - Suction motor 1/4HP 110V - 60Hz - Polishing motor #26 Red Wing Two speeds - Tapered Shafts - Aluminium Shelded hoods with lights and insert
pans - Over head
134
21/05/2010 / 1284
Laboratory Benches
HANDLER - 103485 Pol/Grinding Unit w/Cart&Motor
US$ 2,431.80
- 75D Polishing Grinding UnitA professionally designed grinding and polishing unit built specifically for dry grinding
operations such as grooving plaster models, dry polishing and dry model trimming.
- The 75D is powered by a 3/4 HP 3450 RPM suction motor which produces 600 CFM (cubic feet/minute)
[283m3/min] suction capacity.This unit contains 24 shakeable cloth filter bags containing 62 sq. feet of filtering area.
A No. 26 High Base, two speed, 1/4 HP polishing motor is mounted on the 32 wide x 24 deep [81cm x 61cm]
tabletop.
- The Unit effectively entraps particles as small as 0.5 microns and larger particles. Dusts and grindings are shaken
from cloth filter bags with the aid of foot shaker located on lower right side of cabinet. The 75D is a must for all
laboratories. Finished in a durable, modern baked coating.Suction Motor - 3/4 HP, 115 Volts/60Hz.
- Polishing Motor - No. 26 Red Wing, two speed latheSuction Capacity - 600 CFM (cubic feet/minute)
[283m3/min.]Filter Area - 62 sq. Ft., 24 shakeable Cloth Filter Bags.Cleaning - External foot shaker, internal cabinet
dust tray.
- Shipping Wgt.: 325 lbs [147.4 Kg]Unit Dimensions: 56 high x 32 wide x 24 deep. Work surface 40 to table
top[142cm x 81cm x 61cm]
FOR THE NEW MODEL # 75DFC - ASK FOR ADDITIONAL DETAIL
HANDLER - 103392 Reg Pol Unit Tap/Shaft Unit
US$ 1,477.00
#60CTS Regular Polishing Unit Tap/Shaft Polishing Motor - 56xsx18x32in wide 38in shiping weight 200lbs
Contains two 7x10-1/2x14in polishing hoods mounted on either side of #26 1/2HP - two speed red wing
polishing motor - Has a minimum suction capacity of 500CFM - air intake which is channeled through two
12x25x2in fiberglass filters - 1200cubic inches of filter area - Not designed for grooving models - Finished
in a durable baked coating - Suction motor 1/4HP - 110V - 60Hz - Polishing motor #26 Red Wing Two
speeds - Tapered Shafts - Aluminium Shelded hoods with lights and insert pans - Over head
HANDLER - 103396 Reg Pol Unit w/o polish motor
US$ 1,507.80
#60D Regular Polishing Unit without polishing motor - 56xsx18x32in wide 38in shiping weight 200lbs Contains two
7x10-1/2x14in polishing hoods mounted on either side - Has a minimum suction capacity of 500CFM - air intake which is
channeled through two 12x25x2in fiberglass filters - 1200cubic inches of filter area - Not designed for grooving models - Finished
in a durable baked coating - Suction motor 1/4HP - 110V - 60Hz - Polishing motor #26 Red Wing Two speeds - Tapered Shafts Aluminium Shelded hoods with lights and insert pans - Over head
HANDLER - 103395 Spec Pol Unit Tap/Shaft Cart U
US$ 2,058.00
#60FC1TS Special Polishing Unit Tap/Shaft Polishing Motor with Drum Cartridges Filters - 56x24x42in
wide 38in- Techinican can be sitting or standing shiping weight 200lbs Contains two 7x10-1/2x14in
polishing hoods mounted on either side of #26 1/2HP - two speed red wing polishing motor - Has a
minimum suction capacity of 500CFM - air intake which is channeled through two 12x25x2in fiberglass
filters - 1200cubic inches of filter area - Suction motor 1/4HP - 110V - 60Hz - Polishing motor #26 Red
Wing Two speeds - Tapered Shafts - Aluminium Shelded hoods with lights and insert pans - Over head
HANDLER - 103394 Spec Pol Unit Tap/Shaft Unit
US$ 2,058.00
#60C1TS Special Polishing Unit Tap/Shaft Polishing Motor - 56x24x42in wide 38in- Techinican can be
sitting or standing shiping weight 200lbs Contains two 7x10-1/2x14in polishing hoods mounted on either
side of #26 1/2HP - two speed red wing polishing motor - Has a minimum suction capacity of 500CFM - air
intake which is channeled through two 12x25x2in fiberglass filters - 1200cubic inches of filter area - Suction
motor 1/4HP - 110V - 60Hz - Polishing motor #26 Red Wing Two speeds - Tapered Shafts - Aluminium
Shelded hoods with lights and insert pans - Over head
HANDLER - 103397 Spec Pol Unit w/o Polish Motor
US$ 1,890.00
#60D1 Special Polishing Unit without Polish Motor - 56x24x42in wide 38in- Techinican can be sitting or standing shiping weight
200lbs Contains two 7x10-1/2x14in polishing hoods mounted on either side - Has a minimum suction capacity of 500CFM - air
intake which is channeled through two 12x25x2in fiberglass filters - 1200cubic inches of filter area - Suction motor 1/4HP - 110V
- 60Hz - - Aluminium Shelded hoods with lights and insert pans - Over head
21/05/2010 / 1284
135
Scale
Scale
ECCO - 105034 ECCO Mini Scale
US$ 35.00
ECCO Mini Scale - 1000gm x 0.1gm unique design a protective cover for easy portability - Silver metallic case
Lathes
Accessories
HANDLER - 103329 #16D Accela/Rotor Attachemnt
US$ 975.10
#16D Accela/Rotor Attachemnt - 12000-24000RPM - Includes: Guards - Instructions - Light - High Speed Spindle [H#16D] Turns your red wing lathe into a high speed alloy grinder - It attaches to the right side of the lathe - shipping
info: 14x12x17in - Weight: 11lb
HANDLER - 103332 #26SHLD Flex Shield 8x13in
US$ 48.10
#26SHLD Flex Shield 8x13in [H# 26SHLD] Designed for adjustable protection - May be mounted on a lathe table top or model trimmer - Adapting it to a base bolt or drilling a hole to accommodate the machine bolt
mounting base will allow mounting to a sturdy surface - Shipping Weight 1lb
HANDLER - 103355 #32SHLD Flex Shield 6x8in
US$ 48.70
#32SHLD Flex Shield 6X8in attached to 13in adjustable arm [H# 32SHLD] Designed for adjustable protection
- May be mounted on a lathe - table top or model trimmer - Adapting it to a base bolt or drilling a hole to
accommodate the machine bolt mounting base will allow mounting to a sturdy surface - Shipping Weight 1lb
FOREDOM - 101796 Dust Collector Hood
US$ 49.00
Dust Collector Plastic Hood - each sold separatley - - 2 1/2in [64mm] Adapter that fits most collection system
hoses - 6 1/2in [165mm] High - 4 5/8in [117mm] Wide - 8 5/8 [219mm] Deep - Hoods are made of heavy gauge
sheet metal construction with non skid pads on the bottom -
Lathes
Chucks for lathes
HANDLER -101101 #67 Auto Chk
US$ 61.25
#67-0 Auto Chuck - used with attachments - [H#67-0] - use w/ stone chuck- tapered chuck- bur chuck- arbor chuck- automatically
changes chucks while lathe is in motion-
136
21/05/2010 / 1284
Lathes
Chucks for lathes
HANDLER - 101374 #16-0 Chuck Changer Only
US$ 308.70
#16-0 Chuck Changer Only - provides full precision changing of 1/4in [ .6cm ] and 3/32in [ .2 cm ] diameter
burs [H # 16 ] #16 is shipped with complete with chuck acessories as follows: p- 16-15 Arbor band chuck qty 1
- p-16-16 Spiral tapered chuck qty 1 - p-16-19 Stone chucks qty 1 - p-16-20 Mandrels for small abrassive
wheels qty 2 - p-16-10 Clutch qty 1 - p-16-ADW Adapter qty 1 - #16D for the right part motor - #16L for the left
part motor - [ embrague spindle automatic ]
HANDLER - 103480 #67A Auto chuck Kit
US$ 88.15
#67A Auto chuck Kit - Auto-chuck [1] - Wrench [1] - Stone Chuck [1] - Tapered Chuck [1] - /32in [0.2cm] Bur Chuck [1] - Arbor
Chuck [1] shipping 5x3-3/4x1in - weight 1lb
HANDLER - 101103 Arbor Band Chk 1/4in
US$ 9.90
#13-1 Arbor Band Chuck Right or Left - 1/4inch [ 0.6cm] - specifiy 13-1L (left) or 13-1 R(Right) when ordering- [H#13-1] - accommodates
abrasive stones w/ 1/4 inch arbor only- manufactured of alloy steel and plated-
HANDLER - 101097 Arbor Band Lft/Rgt 3/4 x 3/4in
US$ 17.05
#9 Arbor Band- 3/4x 3/4inch [ 1.9 x 1.9cm] - specifiy 9L (left) or 9R (right) when ordering- [[H#9] - made of alloy steel and plated to fit onto
standard dental tapered shafts- the abrasive band is held in place by tightening the end screw against the rubber arbor-
KEYSTONE-034-1260020 Arbor Chk Ati-Achmt 3/4 Hd
US$ 12.00
Arbor Chuck Ati-Achment For Jacobs 3/4 Head [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental
Depot is specialized business in Dental lab equipment & Dental Porcelain Furnaces ]
KEYSTONE-034-1260030 Arbor Chk- Lft Hnd 1/4 sh
US$ 8.00
Arbor Band Chuck - Left Hand - 1/4inch shank - For standard Lathe - 3/4 dia x 3/4in. wide abrasive bands - female
section is designed for a standard 3/8in shaft [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is
KEYSTONE-034-1260040 Arbor Chk- Rgt Hnd 1/4in sh
US$ 8.00
Arbor Band Chuck- Right Hand - 1/4inch shank - For standard Lathe - 3/4 dia x 3/4in. wide abrasive bands female section designed for standard 3/8in. shaft. [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental
HANDLER - 101099 Atlas Precision Chk Rgt sh
US$ 95.10
#18 Atlas Precision Chuck - Right Shaft - .001inch diameter [ 0.03mm] to .250inch [6.4mm]- [H#18] -This chuck is precise jacobs
type chuck for use w/ chuck accessories having a diameter as specified above- it attaches to the right shaft of a dental lathe w/
standard dental tapered shafts - provides technician w/ unmatched concentricity-
HANDLER - 101102 Auto Chk II Rgt 3/32in
US$ 61.69
#67B Auto Chuck II - Right Side - designed to interchange 3/32inch [0.2cm] burs and mandrels- [H#67B] - Designed to change burs
and mandrels while lathe is in motion- will provide precise bur changing while saving time- installs on the tapered shaft of dental
lathes-
21/05/2010 / 1284
137
Lathes
Chucks for lathes
KEYSTONE-034-1260050 Bur Chk- Rgt Hnd
US$ 26.00
Bur Chuck - For standard Lathe Shaft - designed to be used w/ small burs & mandrels not exceeding 1/4 in.
diam.- to be used w/ lathes having a tapered shaft - available for right hand side of the lathe only. ( Jacobs type )
[ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized business in Dental lab
HANDLER - 101095 Jacobs Type JR. Chk-Rgt 1/2in
US$ 26.95
# 8 Jacobs Type JR. Chuck - Right shaft motor - 1/2 inch - [1.3 cm] - [H#8] - The #8 chuck is designed for use on polishing motors
which have 1.2 in [1.3cm] striaght shaft- all specifications are identical to 8T expect for its adaptation onto 1/2 in shaft-
HANDLER - 101096 Jacobs Type JR. Chk-Rgt 1/4in
US$ 26.95
# 8T Jacobs Type JR. Chuck - Right shaft motor -1/4 inch - [0.6 cm] - [H#8T] - Is designed specifically for use w/ small burs &
mandrels which do not exceed 1/4 inch in diameter- it is built to be less expensive & semi- precise adjustable chuck for use on
lathes w/ tapered shafts- opens w/ a CCW twist & closes w/ CW twist-
HANDLER - 101087 Stone Chk -Lt Hnd 3/8in hole
US$ 8.05
#2 Stone Chuck - Left Hand - 3/8inches [1cm] I.D.( hole size ) of the wheel- [H#2] - Stone chucks are designed to accommodate
abrasive wheels w/ various inside diameters-
HANDLER - 101088 Stone Chk -Lt Hnd 5/16in hole
US$ 8.05
#3 Stone Chuck - Right Hand - 5/16inches [0.8cm] I.D.( hole size ) of the wheel- [H#3] - Stone chucks are designed to accommodate
HANDLER - 101090 Stone Chk -Rt Hnd 1/4in hole
US$ 8.05
#5 Stone Chuck - Right Hand - 1/4inches [0.6cm] I.D.( hole size ) of the wheel- [H#5] - Stone chucks are designed to accommodate
HANDLER - 101086 Stone Chk -Rt Hnd 3/8in hole
US$ 8.05
#1 Stone Chuck - Right Hand - 3/8inches [1cm] I.D.( hole size ) of the wheel- - [H#1] - Stone chucks are designed to accommodate
KEYSTONE-034-1260060 Stone Chk Attach 1/4in sh
US$ 11.00
Stone Chuck Attachment - 1/4inch shank - For Jacobs 3/4 - [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is
HANDLER - 101098 Stone Chk Lft/Rgt 1/4in
US$ 11.00
#12 Stone Chuck 1/4inch [0.6cm] - Specifiy 12L (left) or 12R (Right) when ordering- [ H#12] - Designed w/ 1/4 shank for use in Jacobs type
chucks- this stone chuck accommodates abrasive stones w/ 1/4 - I.D. only- manufactured of alloy steel and plated-
KEYSTONE-034-1260070 Stone Chk- Lft Hand 1/4in sh
US$ 9.00
Stone Chuck - Left Hand - 1/4inch arbor hole - 3/8inch shaft - for lathe and knock down wheels & stones -Made of
steel. [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized business in Dental lab
HANDLER - 101089 Stone Chk- Lt Hnd 5/16in hole
US$ 8.05
#4 Stone Chuck - Left Hand - 5/16inches [0.8cm] I.D.( hole size ) of the wheel-- [H#4] - Stone chucks are designed to accommodate
138
21/05/2010 / 1284
Lathes
Chucks for lathes
KEYSTONE-034-1260080 Stone Chk- Rgt Hnd 1/4in hole
US$ 9.00
Stone Chuck - Right Hand - 1/4inch arbor hole - 3.8inch shaft - for lathe and knock down wheels & stones - Made of steel. [ Keystone
Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized business in Dental lab equipment & Dental Porcelain Furnaces ]
HANDLER - 101091 Stone Chk-Lt Hnd 1/4in hole
US$ 8.05
#6 Stone Chuck - Left Hand -1/4inches [0.6cm] I.D.( hole size ) of the wheel [H#6] - Stone chucks are designed to accommodate
HANDLER - 101094-L Taper Brass Chk -Left Hnd
US$ 8.05
#7BL Tapered Brass Chuck- - [H#7 BRASS LEFT] - #7B tapered chuck is designed excatly as the #7 steel chuck- execpt it is made of
brass- These chucks provide easier on/off placement onto tapered dental shafts- causing less shaft wear-
HANDLER - 101094 Taper Brass Chk -Right Hnd
US$ 8.05
#7BR Tapered Brass Chuck- - [H#7 BRASS RIGHT] - #7B tapered chuck is designed excatly as the #7 steel chuck- execpt it is made
of brass- These chucks provide easier on/off placement onto tapered dental shafts- causing less shaft wear-
KEYSTONE-034-1790070 Taper Spindle - Rgt Hnd 3/8in
US$ 8.50
Tapered Spindle - Right Hand 3/8inch shaft - standard tapered - made of steel - designed to be used with buffing
wheels - brushed - and centered - [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized
business in Dental lab equipment & Dental Porcelain Furnaces ]
KEYSTONE-034-1790060 Taper Spindle -Lft Hnd 3/8in
US$ 8.50
Tapered Spindle - Left Hand - 3/8inch shaft - standard tapered - made of steel - designed to be used with buffing
wheels - brushed - and centered wheels - [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is
KEYSTONE-034-1790010 Taper Spindle Chk1-1/2x 4in
US$ 8.50
Tapered Spindle Chuck - 1-1/2x 4inch - Ai-I-Atachment For Jacobs chuck [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental
HANDLER - 101092-1 Taper Steel Chk - Lft Hnd
US$ 8.05
#7 Tapered Steel Chuck- 7L (Left) - [H#7 STEEL] - #7 tapered chuck is designed specifically for use with buffing wheels- brushesand lead centered wheels- Precision manufactured of alloy steel- this chuck is built for placement onto lathes and polishing motors
containing standard tapered shafts-
HANDLER - 101092 Taper Steel Chk - Rgt Hnd
US$ 8.05
#7 Tapered Steel Chuck- 7R (Right) - [H#7 STEEL] - #7 tapered chuck is designed specifically for use with buffing wheels- brushesand lead centered wheels- Precision manufactured of alloy steel- this chuck is built for placement onto lathes and polishing motors
containing standard tapered shafts-
HANDLER - 101100 Tapered Chk 1/2in or 5/8in
US$ 11.00
#20 Tapered Chuck Right or Left Side - 1/2inch [13mm] or 5/8inch [16mm] - [H#20] Especify with the oprder please - Manufactured
of steel alloy- provides the user with a heavy duty chuck for use w/ buffs- brushes- and lead accessories-
Lathes
Complete lathes
21/05/2010 / 1284
139
Lathes
Complete lathes
HANDLER- 103325 #16 Chuck/Chnger w/Accessories
US$ 328.30
#16 Chuck/Changer with Accessories - Arbor Band Chuck [1] - Spiral Tapered Chuck [1] - Stone Chucks [2] Mandrels for small abrasive wheels [2] - Collect Wrench [1] - Clutch [1] - ADW Adapter [1] - Designed to
provide full automatic precision changing of 1/4in and 3/32in diameter burs - mandrels - and chuck
accessories with the slight movement of a handle while the motoe is turning - It provides the technician with
excat concentricity and quick easy changing of variuos chucks which speeds up grinding - polishing- and
finishing procedures - It is adaptable to most dental motors - Dimensions: 8-3/4x4x6-1/4in Shipping Weight:
5lbs [ redwing ]
HANDLER- 103326 #16B-1 Chuck/Chnger
US$ 595.56
#16B-1 Chuck/Changer with Lathe - Factory installed on the right side of a 26 HIGH BASE - 1/4 HP - 1725-3450RPM - Motor
Handler con embrague o chuck automatico ya instalado - [ redwin ]
HANDLER -103327 #16C Accela/Rotor High Base
US$ 1,160.00
- 16C Accela/Rotor High Base
- 12000/24000 RPM - Complete Red Wing Lathe.
- Accela/Rotor with removable light and protective sheild - High Speed Spindle.
- Adjusting levers and necessary guards - Dimensions - 19x19x11in -Weight -50lb.
- This product is a combination of the Accela/Rotor attachment and #26A Red Wing Lathe.
- It converts the right side of the lathe from standard lathe speeds for use in finnishing non precious alloys
and chrome cobalts alloys.
- The high speed spindle incorporates an avtivating handle which opens and closes the [3/21in] collects for
ease of changing burs and mandrels while the motor is running.
HANDLER - 103328 #16C Accela/Rotor Low Base
US$ 1,225.00
- 16C Accela/Rotor Low Base - 12000/24000 RPM
- Complete Red Wing Lathe - Accela/Rotor with removable light and protective sheild.
- High Speed Spindle - Adjusting levers and necessary guards - Dimensions - 19x19x11in
-Weight -50lb
- This product is a combination of the Accela/Rotor attachment and #26A Red
Wing Lathe.
- It converts the right side of the lathe from standard lathe speeds for use in finnishing non
precious alloys and chrome cobalts alloys.
- The high speed spindle incorporates an avtivating handle which opens and closes the [3/21in]
collects for ease of changing burs and mandrels while the motor is running.
HANDLER- 100626 16B Chuck/Chnger
w/Lathe 1/4Hp
US$ 519.99
HANDLER 16B CHUCK/CHANGER W/ LATHE 1/4HP
*#16B Chuck changer with Lathe
*Factory installed on the Right Side of a 25A Low Base
*1/4HP
*1725-3450RPM
HANDLER - 101106 26 Rd Wg 1/4 Hp - 2 Spd -Hi Sh
US$ 280.00
#26 Red Wing Lathe- 1/4 HP- 2 Speed- 1725/3450 Rmp- High shaft 8- Chuck removers- [H#26] - use as a polishing lathe- its
tapered shafts will accpet standard dental tapered chucks- 6 in shaft height allows larger diameter buffing wheels for pumice & dry
polishing operations- may be supplied w/ 1/2 in straight shafts when specified-
HANDLER - 101107 27 Rd Wg 1/4 Hp - 1 Spd -Hi Sh
US$ 259.56
#27 Red Wing Lathe - 1/4 HP- 1 Speed- 3450 Rpm- High 8 shaft- [H#27] - for technician that desires a single speed polishing
motor where a 3450 rpm speed is used exclusivley for polishing- may be supplied with 1/2in shafts when specified-
140
21/05/2010 / 1284
Lathes
Complete lathes
HANDLER - 101105 26A Rd Wg 1/4Hp - Lw Sh
US$ 238.00
26A Red Wing LatheA full 1/4 HP
*1725/3450 rpm
* lathe for use on top of laboratory bench (115 Volts/60Hz).
* Its 4 1/2 [11.4cm] shaft height
*Allows for easy use by the technician with hands resting on the tabletop.
Shipped with
*Standard dental tapered shafts
*Each lathe includes a right and left chuck remover
*Which provides ease of removal of standard dental chucks
*Manufactured to provide years of durable service while being utilized for such operations as
polishing and grinding.
*This unit may be supplied with 1/2 [1.3cm] straight shafts when specified
*Available in 115 Volts/50Hz, 220/50Hz and 220/60Hz at additional charge
*NOTE: Specify No. 26AS for motor with 1/2 [1.3cm] straight shafts
*Unit Dimensions: 15 1/2 long x 7 7/8 wide x 7 1/4 high [39cm x 20cm x 18cm]
*Model: 26A
HANDLER - 101109 28H Rd Wg 1/3Hp - 2 Spd- Hi Sh
US$ 297.78
28H Red Wing LatheA 1/3 HP
*Two speed 1725/3450 rpm
*High base polishing motor with 6 shaft height
*Built to accommodate larger diameter buffs and chuck accessories
*Provides added torque for the frequent polisher
*The unit is shipped with
*standard dental tapered shafts with chuck removers
*Available in 115 Volts/60Hz and 115 Volts/50Hz, 220 Volts/50Hz and 220 Volts/60Hz
*at additional charge
*NOTE: Specify No. 28HS for motor with 1/2 [1.3cm] straight shafts
*Unit Dimensions.: 15 3/4 wide x 7 7/8 deep x 8 3/4 high [40cm x 20cm x 22.2cm]
*Model: 28H
HANDLER - 101108 28L Rd Wg 1/3Hp - 2 Spd -Lw Sh
US$ 297.78
#28L Red Wing Lathe- 1/3 HP- 2 Speed- 1725/3450 Rmp- Low shaft 8 [4.5 inch] - [H#28L] - for technician who requires additional
torque - contains standard dental tapered shafts w/ chuck removers-
HANDLER -101110 29 Rd Wg Mtr -1 Spd 6-3/8in Sh
US$ 301.56
#29 Red Wing Motor- 1/2HP- 1 Speed- 2450Rmp - 6-3/8inch shaft- [H#29] - for heavy use by technician and polisher- rugged
polishing motor will provide years of trouble free service-shipped with #20 tapered chucks (left & right)
HANDLER - 101111 29A Rd Wg Mtr 1/2Hp-1 Spd Hi S
US$ 309.96
#29A Red Wing Motor- 1/2 HP- 1 Speed - 3450 Rmp- high shaft 6inches- [H#29A] - Extra heavy duty use by techinican - requires
extra torque- manufactured w/ 1/2 inch straight shafts- #20 tapered chucks for use w/ large buffs- brushes- and similar chucks-
FOREDOM - 101795 Bch Mini Lth w/ Sp 1/6Hp 220v
US$ 172.00
Bench Mini Lathe with Tapered Spindes - 220V only -1/6HP High Torque Motor - 125Watts - Continuous
Rating - 5/16in Diameter motor shaft - 500-7000RPM - Weight 7.5lbs [3.4kg] - Width 13in [330mm] between
spindles - Height 5 1/8in [130mm] - Height of spindle center from table surface 3 3/4in [95mm] - ball bearing Lathe comes with the A-TM5 [left hand] - and A-TM6 [right hand] tapered spindles for holding buffs and
brushes up to 4inches [100mm] - Dust collector hoods sold separatley -
21/05/2010 / 1284
141
Lathes
Complete lathes
ECCO - 101476 Lathe polisher 1/3 Hp 110vo
US$ 175.00
Lathe polisher 1/3 Hp 110voltz -
Loupes & Magnifiers & Lights
Loupes & Magnifiers
ECCO - 100030 Magnifiers W/ Flip-Up Lenses
US$ 15.00
Magnifiers W/ Flip-Up Lenses #45 (2 1/4X)- Telesight Half-Frame LO314 OPTIVISOR
ECCO - 100027 Optical Supervisr II Head lupe
US$ 21.00
Optical Supervisor II with Light
Head band Magnifier
(4 Polycarbonate interchangeable Lens : 1.25 x 1.8x 2.5x & 3.5x )
- Lenses can be stacked to double the magnification
- antiscratch treatment to extend using time
- Pingpong Light with battery
- Battery included
- Head Set adjustable
- Replaces Optivisor Magnifier - ideal for dental laboratory , clinic, and dental assistants
Mandrels
HANDPIECE MANDRELS ( Ecco )
- Screw
- Spiral
- Converter
- Snap-On
142
21/05/2010 / 1284
Mandrels
MANDRELS 100PK
Price
+
310122
Code
ECCO - 3/32 M122 Large Head 100pk
Name
US$ 69.75
+Info
310305
ECCO - 3/32 #305 High Speed 100pk
US$ 35.65
+Info
310303
ECCO - 3/32 #303 Regular 100pk
US$ 34.50
+Info
310105
ECCO - 3/32 M105 Spiral 100pk
US$ 37.20
+Info
310103
ECCO - 3/32 M103 for Hex-Nuts 100pk
US$ 27.90
+Info
310300
ECCO - 3/32 #300 Prec Brass 100pk
US$ 69.75
+Info
MANDRELS 10PK
Price
+
310305-1
Code
ECCO - 3/32 #305 High Speed 10pk
Name
US$ 5.09
+Info
310303-1
ECCO - 3/32 #303 Regular 10pk
US$ 4.92
+Info
310300-1
ECCO - 3/32 #300 Prec Brass 10pk
US$ 9.96
+Info
310133-1
ECCO - 3/32 M122 Large Head 10pk
US$ 9.96
+Info
310105-1
ECCO - 3/32 M105 Spiral 10pk
US$ 5.31
+Info
310103-1
ECCO - 3/32 M103 for Hex-Nuts 10pk
US$ 3.98
+Info
189-001
ECCO - 3/32 Heavy Dutty 10pk
US$ 10.00
+Info
MANDRELS 20PK
Code
189-002
Name
ECCO - 3/32 Super Heavy Dutty 20pk
Price
+
US$ 24.00
+Info
Mandrels
Arbor Band Mandrels
ARBOR BAND MANDRELS (
Keystone )
Price
+
100730
Code
KEYSTONE - Rubber Head for 20mm mandrel
Name
US$ 1.80
+Info
100729
KEYSTONE - Rubber Head for 13mm mandrel
US$ 1.80
+Info
034-1520035
KEYSTONE - 3/32 Arbor Band for 20mm Band
US$ 2.50
+Info
034-1520030
US$ 2.50
+Info
034-1520020
US$ 2.50
+Info
034-1520010
US$ 2.50
+Info
Mandrels
Heavy Duty Mandrels
ECCO - 7540 ECCO Mandril Reforz 100Box
US$ 12.00
ECCCO Heavy Dutty HP Mandrel 20each bag - Mandril reforzado bolsa x 20 -
21/05/2010 / 1284
143
Mandrels
Special mandrels
Mandrels
Special mandrels
KEYSTONE-034-1300510 Econo Cutter Mandrel Only
US$ 3.91
Econo Cutter Mandrel Only - [K# 1300510 ] Disco Fibrado de Corte ( Malla de Refuerzo Interna ) - Special mandrel required for 2 1/2
inches in diameter - and 4 inches in diameter econo cutters -
MILTEX- 053-75-40 FG-HP Converter FG-RA Adaptor
US$ 10.24
Fg-Hp Converter & FG-RA Adaptor - [M#75-40] - Adaptador Mandril Mandrel -
Micromotors electric and neuma
Air micromotors ( neumatic)
ELITE - MTII Air Motor Only E-Type 2H
US$ 85.00
Air Motor Only 22000Rpm 2 Holes (4 Holes).S/Caja Control.Micromotor Neumatico Turbina Micro Clinica
Handpcs for Lab Micromotor
NSK - 101136 HP Torque only for Ultim 500
US$ 574.00
NSK Hand Piece Torque for Ultimate 500 - Hand piece only - [ N# UM50T ] [ N# Y140-562 ] -Piezxa de mano
torque para ultimate 500 ] [ NSK prices will be updated at the moment of official quotation ]
MARATHON- 100826 Micro Hndpce Only E-type elec
US$ 104.00
Marathon Micromotor E-type - [electric] handpiece only - High torque - Starndard conection for marathon
control units.
MARATHON-100555 Micro Hndpce Only 35000rpm
US$ 165.00
Marathon Handpiece only 35000rpm for micromotor - Good for Handy 700 - Escort 2 & 3 ) [J#MO1055]
MARATHON - 101733 Micro Hndpce only Brushless
US$ 531.00
Marathon Brushless Handpiece Only [M# BH60 ]
144
21/05/2010 / 1284
MARATHON - 102345 Micro Hndpce Only 40.000rpm
US$ 170.00
Marathon Handpiece Only 40000rpm for micromotor - good for Marathon 7 and others - SH37SN
MARATHON- 100714 Micro Hndpce Only 45000rpm
US$ 175.00
Marathon Handpiece only 45000rpm for micromotor - Good for Handy 700 - Escort 2 N1 )
Micromotors for Laboratory
MARATHON - 103896 BestQual-2 Micro Comp 110/220V
US$ 285.00
- Marathon BestQual - 2I Micromotor Complete
- With Speed control pedal - automatic stop-reset with overloads - 40000 rpm
- Excellent Torque - Control unit - Pedal - Handpiece - Handpiece stand
- Operation manual - 110/220volts - Powerful torque and continuously variable speed control
- No heat after long hours of operation by effective electrical design - easy change of the driving direction for
effiency - compact and ergonomic design
BUFFALO-008-38500 Electric Hndpce System 110V
US$ 490.10
Buffalo Magic Wand Electric Handpiece System Complete -110V - Silver console - Handpiece w/HP Collect 35000RPM - Foot Control - Spare
Square Carbon Brushes [Set of 2] -Handpiece holder and collect wrenches - handpiece 6x1-1/8in -Major Diameter - 5/8in - Nose Diameter Weight 9.5oz Console 4-1/4x5-1/4x3-1/8in - Weight 2lb - micromotor
BUFFALO-008-38600 Electric Hndpce System 220V
US$ 490.10
Buffalo Magic Wand Electric Handpiece System Complete -110V - Silver console - Handpiece w/HP Collect 35000RPM - Foot Control - Spare
Square Carbon Brushes [Set of 2] -Handpiece holder and collect wrenches - handpiece 6x1-1/8in -Major Diameter - 5/8in - Nose Diameter Weight 9.5oz Console 4-1/4x5-1/4x3-1/8in - Weight 2lb -mircomotor
MARATHON - 100522 Escort-2 Micro Comp 110/220V
US$ 335.00
MARARTHON EXCORT II MICROMOTOR COMPLETE
*Control Unit
*Pedal
*Hanndpiece
*Handpiece Stand
*110/220V
*Speed Control Pedal
*Automatic Stop
*Reset with Overloads
*35000RPM
*Excellent Torque
*Operation Manual
*Powerful Torque and Continuously Variable Speed Control
*No Heat After Long Hours of Operation By Effiective Electrical
Design.
*Easy change of Driving Direction of Effiency
MARATHON - 103936 Marathon-4 Champ E-Type hndpc
US$ 240.00
- Marathon-4 Champion Complete with E-Type Handpiece
- On/off pedal
-25% more torque than regular marathon
- Automatic top- reset with overloads
21/05/2010 / 1284
145
- Excellent torque
- Control unit
- Pedal
- 35000 rpm
- Handpiece Stand
- Comes with the handpiece in the second photo not the one shown in main picture
MARATHON - 100521 Escort-3 Micro Comp 110/220V
US$ 210.00
MARATHON ESCORT-3 MICROMOTOR COMPLETE
*Control Unit
*On/Off Pedal
*3500RPM
*Handpiece
*Handpiece Stand
*110/220V
*Excellent Torque
*Automatic Stop
MARATHON - 200086 Handy-700 Micro Complete 2 HP
US$ 870.00
MARATHON HANDY 700 MIRCOMOTOR COMPLETE
*Control Unit
*On/Off Pedal
*3500RPM
* 2 Handpieces:
*1 Brushless 4500RPM
*1 with Brushes 3500RPM*Handpiece Stand
*110/220V
*Low Vibration
*Low Noise
* Sets Vertical
WORLDENT- 106825 Iceberg Lab Microm. Complete
US$ 736.00
- 35000 RPM Electric Handpiece High Torque
- Made by Euro-Worldent
- Proative Adjustable Chuck (Rejuvenates & Recalibrates Chuck for New Prolonged Life)
- Automatic Torque Overdrive (Torque Aelf-Activate that increase power)
- "On-Board "Cruise Control" (Selectable maximum speed settings)
- Orthopedic Contoured Grip ( Comfortable counter-balanced design reduces muscle fatigue)
- Micro-Glide Sealed Bearings (Precision balanced for smooth vibration free performance)
- Variable Speed Foot Pedal (Selectable speeds from 0 - 35,000rpm)
- CE Certified [WORLDENT ]
MARATHON - 102210 Marathon N7R Complete Set 110V
US$ 341.00
MARATHON NR7 MICROMOTOR COMPLETE
*Control Unit
*Variable Pedal
*3500RPM
* SH37SN Handpiece 4500RPM
*Handpiece Stand
*110/220V
*Powerful Torque
*Continous Variable Speed Control
*Automatic Stop
*Vertical or Horizontal Style
*Maximum Speed Foot Control For Variable Rotation
*Easy Change Of Forward/ Reverse Direction
146
21/05/2010 / 1284
MARATHON - 101536 Marathon-3 Champ Comp 110/220v
US$ 225.00
MARATHON 3 CHAMPION MICROMOTOR COMPLETE
*Control Unit
*On/Off Pedal
*3500RPM
*Handpiece
*Handpiece Stand
*110/220V
*1/3 More Torque and Power Than Regular Marathon
*Automatic Stop
MARATHON - 101557 Marathon-N1 Micro Complete
US$ 385.00
MARATHON N1 MICROMOTOR COMPLETE
*Control Box
*SH37S Handpiece - Capable of 2 handpieces Set comes with 1 handpiece - Aditional second handpiece can be purchased separatedly *Variable Foot Pedal
*Handpiece Holder
*2000 to 45000RPM
*Digital Display
*110/220V
*Strong Torque
*Continuously Variable Speed Control
*Dual Handpiece Connector Operates One Handpiece At a Time
*Forward 3 and Reverse Switch
*Automatic Stop & Reset
*Feed Back Circuitry Produce More Power
*No Noise or Vibrations
*No Heat After Long Hours of Operation
BUFFALO - 008-37570 V35- High Torque- Multi-Speed
US$ 485.00
V35 High Torque- Multi-Speed To 35K Rpm- Duration System- 110 vol (Complete: V35 Console-+ foot control + handpiece ) -[ electric
handpiece ] - [ micromotor complete ]
Microscopes
Parts & Access for microscopes
LW - 103410 Flex Arm C-Clamp Stand
US$ 420.00
Flex Arm only C-Clamp Stand for Vision Flex Arm head microscope - [ replacement parts ]
Microscopes
LW - 100945 Bend-E System Stereo Microscop
US$ 512.40
LW BD-1A Scientific Bend E System Stereo Microscope -5x
- 10x Microscope w/ base - with 0.5 x lensincluded - NO LIGHT The ultimate in economy and flexibility - The Bend-E
system allows the addition ofvarious accessories for inspection and observation for Dental - Manufacturing- forensicsteaching and moreOptoinal Accesories: Mag Lens - Flex light - Camera mounts- video - LCD monitor
21/05/2010 / 1284
147
Microscopes
LW - 100946 Bend-E System Stereo Microscop
US$ 719.60
LW BD-2A Scientific Bend E System Stereo Microscope with LIGHT-5x
- 10x Microscope w/ base - with 0.5x lens included - 1 magnifier 2x and 4x - Two Flex arms on the base table-Variable
fluorescent ring lightThe ultimate in economy and flexibility
- The Bend-E system allows the addition of various accessories forinspection and observation for Dental Manufacturing- forensicsteaching and more Optoinal Accesories:Mag Lens - Flex light - Camera mounts- video LCD monitor
LW - 100947 Vision Flex Arm Microsc VFA-12
US$ 736.40
VFA-12 Vision Flex Arm Microscope 10x - 20x (No Light) - Original Optics - Made in Korea
Microscopes
Light For Microscope
ECCO - 102335 Jupiter Magnifier Lamp 13W
US$ 185.00
ECCO JUPITER MAGNIFER LAMP 13 WATTS
*13Watts
*Grey
*Bulb Included
*Table Lamp Has a Unique Flip Design
*Revealing 3x Optical Grade Maginifer
*Multi-Positon 360 Degrees Rotating Base
*Adjusts Easily to Direct The Low Hear
*Low Glare
*Natural Daylight Illumination
*Reduced Eyestrain
*Dual Lever Positioning Options
*Long Life
LW - 102321 Var Flouresc Ring Light VFA-12
US$ 142.80
Variable Flourescent Ring Light - Compatible for Vision Flex Arm [ # VFA-12] - Cool white illumination - Variable
intensity - Focused light -
LW - 102320 Var LED Ring Light VFA-12
US$ 273.00
Variable LED Ring Light - Compatible for Vision Flex Arm [# VFA-12] - Cool white illumination - Both have variable intensity - LED
is brighter - Focused light -
Microscopes
Microscopes/Loupes
148
21/05/2010 / 1284
Microscopes
Microscopes/Loupes
TAUB - 100839 Stereo Microscope S300II S/M
US$ 789.99
Stereo Microscope S300II S/M
- Contains : mirror body - Lens unit (8x)
- Eye shades and weightstand - Brilliant optics gives excellent visibility even under low light
- Very sharp image - Glassshield protects optics from dust or dirt Portable stereo microscope with 8x or 16x
power ( 16xoptional ) any choice
- Flexible neck with rotating optics - Heavyweight base - Focal distanceabout 5.5 inches Contains: mirror body
- lens unit (8x) - eye shades - weight stand[HS#514-5770 ]
Mixing bowls
MIXING BOWLS ( All Brands )
- 4 diferente shapes
- Diferent Colours
- Great quality
Price
+
101779
Code
ECCO - Mixing Bowls - Smalll 82x57mm
Name
US$ 3.50
+Info
101780
ECCO - Mixing Bowls - Medium 107x69mm
US$ 4.00
+Info
101781
ECCO - Mixing Bowls - Large 127x 88mm
US$ 4.00
+Info
101782
ECCO - Mixing Bowls - X Lg 139x 107mm
US$ 4.60
+Info
200151
ECCO - Medium Silicone Mixing
US$ 7.00
+Info
200152
ECCO - Large Silicone Mixing
US$ 9.90
+Info
1150060
KEYSTONE - Green Flexiboles Small 150cc
US$ 5.04
+Info
1150070
KEYSTONE - Green Flex Bowl Medium 350cc
US$ 6.04
+Info
1150080
KEYSTONE - Green Flexiboles Large 600cc
US$ 7.05
+Info
1150090
KEYSTONE - Green Flexiboles X Lg 850cc
US$ 7.93
+Info
034-1150010
KEYSTONE - Rubber Mixing Bowl Small 3in
US$ 4.03
+Info
034-1150020
KEYSTONE - Rubber Mixing Bowl Medium 4in
US$ 4.78
+Info
034-1150030
KEYSTONE - Rubber Mixing Bowl Lg 4-3/4in
US$ 6.16
+Info
034-1150040
KEYSTONE - Rubber Mixing Bowl Large 6in
US$ 9.83
+Info
034-1150050
KEYSTONE - Rubber Mixing Bowl Jumbo 9in
US$ 17.26
+Info
Model Former bases
ECCO - 101674 Base Mold S-M-L-2Q 5pk
US$ 25.00
ECCO 5 Set Base Molds ( S-M-L-& quadrants )
- Pindex System (Silicone Form) ZocaladorFormador Modelo Zocalador Socalador Formador Modelo
(translucido) [ca7200]
21/05/2010 / 1284
149
Model Former bases
ECCO - PX147 Base Mold S-M-L-XL 4pk
US$ 25.00
ECCO 4 Set Base Molds (S-M-L-XL) for Pindex Sys (Silicone Form) Zocalador Formador Modelo Base ) (vER
ECCO - PX148 Quadrant Molds Lft & Rgt 2pk
US$ 15.00
ECCO 2 Quadrant Molds Left & Right (1 & 1) ( Pindex System Silicone Form Zocalador Formador Modelo)
Base Zocalador Socalador Formador Modelo
Model Trimmers
10in MODEL TRIMMERS ( Buffalo )
BUFFALO MODEL TRIMMER 10IN -1/3HP
*1/3HP
*Ideal for intermittent grinding demands and for most dental office applicances
*Whisper quiet operation
*Fully adjustable tables
*Enhanced splash control
Comes complete with:
*Grinding Wheel
*Water hose - 1/4 x 3in
*Drain hose - 1 x 3in
*requires a maximum of 7amps or 10amps upon start up
Techincal specifications
*Dimensions: 13 x 13 x 18in
*Weight: 48lb
BUFFALO MODEL TRIMMER 10IN - 1/2HP
*Same as above trimmer except they are excellent for commerical labs and large offices doing high volume trimming
*Trimmers available in 110V and 220V
Price
+
008-61790A
Code
BUFFALO - Model Trimmer 10in 1/3HP 110V
Name
US$ 511.00
+Info
008-61792
US$ 581.00
+Info
008-61792A
US$ 665.00
+Info
Dry Model Trimmer (Buffalo)
BUFFALO DRY MODEL TRIMMER
*A heavy duty dry model trimming system
*Eliminates the potential ecological and model accuracy problems associated with wet trimming slurry
*Heavy duty for added durability and less maintenance
*On/off switch starts trimmer
*Powerful 1/3HP
*1726RMP motor provides high torque and maximum cutting power
*4 x 24in grinding belts and multi position talke provide a larger cutting area and improved versatility
Comes with:
*Plastic model basket
*Set of three assorted fast cutting zirconium oxide trimming belts
*3in OD tail pipe with adapter and requires a high volume dust colletor
150
21/05/2010 / 1284
Model Trimmers
Techincal specifications:
*12 x 12 15in
*Weight 76lbs
*Avaiable in 110 and 220V
Code
008-61650
Name
BUFFALO - Model Trimmer Dry 1/3HP
Price
+
US$ 945.00
+Info
MODEL TRIMMERS 12in (Buffalo)
BUFFALO MODEL TRIMMER 12IN -1/3HP
*1/3HP
*Ideal for intermittent grinding demands and for most dental office applicances
*Whisper quiet operation
*Fully adjustable tables
*Enhanced splash control
Comes complete with:
*Grinding Wheel
*Water hose - 1/4 x 3in
*Drain hose - 1 x 3in*
requires a maximum of 7amps or 10amps upon start up
Techincal specifications
*Dimensions: 13 x 13 x 18in
*Weight: 48lb
BUFFALO MODEL TRIMMER 12IN - 1/2HP
*Same as above trimmer except they are excellent for commerical labs and large offices doing high volume trimming*
Trimmers available in 110V and 220V
Price
+
008-61825
Code
Name
US$ 567.00
+Info
008-61820
US$ 602.00
+Info
Model Trimmers
Arch Model TYrimmer
ECCO - 100469 Arch Model Trimmer 110V
US$ 295.00
ECCO Arch Model Trimmer
- Easy removal of palatal section and other undercuts on stone/plaster models.
- Build it dust evacuation pipes- ( Dust collector not included )
- Polycarbonate protection screen
- Quite
- Uses fast cutting carbide burs or sandimg drum .
- 1 tugsten carbide included
- 110volts
Model Trimmers
Discs for model trimmers
21/05/2010 / 1284
151
Model Trimmers
10in DISCS FOR MODEL TRIMMERS ( All Brand )
*10in Diameter replacement wheel for all makes of model trimmers
*Specifify: ExtraCoarse, Coarse, Medium, or Fine
Price
+
101713
Code
RAY FOSTER - Replacement Abrasive Wheel 10in (254mm) diameter - coarse - for model trimmer - ...
US$ 32.40
+Info
101714
RAY FOSTER - Replacement Abrasive Wheel 10in (254mm) diameter - extra coarse - for model trim...
US$ 33.75
+Info
KEYSTONE - Carbo Model Trimmer Wheel Coarse 10in x 1/4in x 1in 1 Hole for Handler -Torit -B...
US$ 27.00
+Info
103335
HANDLER - Carbo-dent Wheel 10in - Medium - for model trimmer - (H# 31AM )
US$ 27.25
+Info
103334
HANDLER - Carbo-dent Wheel 10in - Coarse - for model trimmer - (H# 31A )
US$ 27.25
+Info
103333
HANDLER - Carbo-dent Wheel 10in - X Coarse - for model trimmer - (H# 31AC )
US$ 27.25
+Info
103338
HANDLER - Reinforced Wheel 10in - Fine - for model trimmer - (H# 31ARF )
US$ 35.44
+Info
103339
HANDLER - Reinforced Wheel 10in - Fine - for model trimmer - (H# 31ARM )
US$ 35.44
+Info
103337
HANDLER - Reinforced Wheel 10in - Coarse - for model trimmer - (H# 31ARC )
US$ 35.44
+Info
034-1900620
Name
12in DISCS MODEL TRIMMER ( All Brand )
- 10in Diameter replacement wheel for all makes of model trimmers
- Specifify: ExtraCoarse, Coarse, Medium, or Fine
Price
+
101715
Code
RAY FOSTER - Abrasive Wheel 12in (304mm) diameter - coarse - for model trimmer - (R# E022 )
Name
US$ 36.45
+Info
101716
RAY FOSTER - Abrasive Wheel 12in (304mm) diameter - fine - for model trimmer - (R# E22A )
US$ 37.80
+Info
101717
RAY FOSTER - Abrasive Wheel 12in (304mm) diameter - extra coarse - for model trimmer - (R# E2...
US$ 37.80
+Info
103350
HANDLER - Reinforced Wheel 12in - Fine - for model trimmer - (H# 32ARF )
US$ 39.15
+Info
103351
HANDLER - Reinforced Wheel 12in - Medium - for model trimmer - (H# 32ARM )
US$ 39.15
+Info
103349
HANDLER - Reinforced Wheel 12in - Coarse - for model trimmer - (H# 32ARC )
US$ 39.15
+Info
034-1900630
KEYSTONE - Carbo Model Trimmer Wheel Coarse 12in x 1/4 x 1in 1 hole - ...
US$ 34.00
+Info
034-1900635
KEYSTONE - Carbo Model Trimmer Wheel Coarse 12in x 1/4in x 1in 2 Holes - for Foster unit on...
US$ 34.00
+Info
ADHESIVES DISCS MODEL TRIMMER ( All brands )
Velcro backed model trimmer discs virtually eliminate downtime and the mess associated with adhesive backed discs.
BUFFALO
Code
008-61960
Name
BUFFALO - Model Trimming Wheels Adhesive Backed Abrasive Disks- #10 6pk
Price
+
US$ 31.00
+Info
HANDLER
Price
+
103345
Code
HANDLER - Starter Kit Wheel 10in 6pk
Name
US$ 48.51
+Info
103340
HANDLER - #31BP Back Up Plate 10in
US$ 25.97
+Info
103356
HANDLER - Starter Kit Wheel 12in 6pk
US$ 54.39
+Info
103352
HANDLER - #32BP Back Up Plate 12in
US$ 26.95
+Info
Price
+
KEYSTONE 12in
- There are superior quality coated discs will cut models three to four times faster than most discs.
- Reduces noise by 75%.
- Available in two size 12in and 10in.
- Backing plates and plastic washers available.
Code
152
Name
21/05/2010 / 1284
Model Trimmers
034-1900680
KEYSTONE - Waterproof Model Trimmer Disc Complete Set - 10in - includes: 6 discs - backing...
US$ 31.97
+Info
034-1900690
KEYSTONE - Waterproof Model Trimmer Discs 12in - 4pk [K# 1900690 ]
US$ 26.60
+Info
034-1900695
KEYSTONE - Waterproof Model Trimmer Discs - 12in - refill -25pk [K# 1900695 ]
US$ 148.89
+Info
034-1900700
KEYSTONE - Waterproof Model Trimmer Plastic Backing Wheel - 12in Dsic [K# 1900700 Rueda
US$ 8.55
+Info
KEYSTONE 10in
Price
+
103832
Code
KEYSTONE - Waterproof Model Trimmer Disc Complete Set - 10in - includes: 6 discs - backing...
Name
US$ 37.19
+Info
103833
KEYSTONE - Waterproof Model Trimmer Replacement Discs 6pk - [K# 1900650 ]
US$ 29.54
+Info
103834
KEYSTONE - Waterproof Model Trimmer Backing Wheel - 10in [K# 1900660 ]
US$ 8.04
+Info
103835
KEYSTONE - Waterproof Model Trimmer Plastic Washer for 10in or 12in disc - [K# 1900670 ]
US$ 2.17
+Info
STICKIES DEDECO
Price
+
031-7072
Code
DEDECO - Stickies-Model Trimmer Discs 12in Coarse Kit 4/Kit
Name
US$ 72.29
+Info
031-7070
DEDECO - Stickies-Model Trimmer Discs 12in Standard Kit 4/Kit
US$ 72.29
+Info
031-7073
DEDECO - Stickies-Model Trimmer Discs 12in Coarse Refill 4pk
US$ 46.46
+Info
031-7071
DEDECO - Stickies-Model Trimmer Discs 12in Standard Refill 4pk
US$ 46.46
+Info
031-7063
DEDECO - Stickies-Model Trimmer Discs 10in Coarse Refill 6pk
US$ 50.47
+Info
031-7062
DEDECO - Stickies-Model Trimmer Discs 10in Coarse Kit 6/Kit - including plastic disc
US$ 56.70
+Info
031-7061
DEDECO - Stickies-Model Trimmer Discs 10in -Standard Refill 6pk
US$ 46.76
+Info
031-7060
DEDECO - Model Trimmer Disc Stickies Coarse 10in - 6pk (1429143) -Dedeco International I...
US$ 55.89
+Info
CARBO-DENT ( Handler )
Price
+
103347
Code
HANDLER - Carbo-dent Wheel 12in Coarse
Name
US$ 27.25
+Info
103336
HANDLER - Carbo-dent Wheel 12in Fine
US$ 27.25
+Info
103348
HANDLER - Carbo-dent Wheel 12in Medium
US$ 27.25
+Info
103341
HANDLER - Carbo-dent Fast Cut 10in 4pk
US$ 38.71
+Info
103353
HANDLER - Carbo-dent Fast Cut 12in 4pk
US$ 40.67
+Info
DIAMOND DISCS FOR MODEL TRIMMERS - ( All brands)
- Long lasting, fast cutting diamond model trimming wheels.
- Aggressive, quiet-trimming wheels outlast numerous Carborundum wheels.
- Solid Aluminum backings and 1" center holes for durability and universal mounting.
Price
+
034-1900645
Code
KEYSTONE - Diamond Coated Model Trimmer wheeel 12in - Medium grit - Single sided -cuts fast...
Name
US$ 402.30
+Info
034-1900642
KEYSTONE - Diamond Coated Model Trimmer wheel 10in - Medium grit - single sided -cuts faste...
US$ 337.90
+Info
102213
ECCO - Diamond Coated Model Trimmer wheel 10in - Medium grit - single sided -cuts faste...
US$ 225.00
+Info
103342
HANDLER - Wheel Diamond Coated 10in - for model trimmer - ...
US$ 335.16
+Info
103343
HANDLER - Wheel Diamond Coated 12in - for model trimmer - ...
US$ 377.16
+Info
Model Trimmers
Model Trimmers 10 in
21/05/2010 / 1284
153
Model Trimmers
ECCO - 102347 Model Trim. 10in 1/2HP 110v
US$ 325.00
ECCO MODEL TRIMMER 10INCHES 1/2HP
*3200rpm Automatic 110V
*Designed for Prothesis
*Can Use the Orginial Keystone 10in Coarse Disc
*High Impact Poliestiren Front Cover
*Gipsum Does Not Stick & Cover Corrosionless
*Flexible/Retractable Draining Hose 2.5Ft - 2In Diameter
*Water Hose 2.5Ft - 3/4in Diameter
*1 Year Wawrranty
*Weight 35Lb
*Dimensions: 18 x 18 x 18
RAY FOSTER - 101583 Model Trimmer 10in 1/3HP
US$ 556.20
RAY FOSTER MT10 MODEL TRIMMER
*10inch Diameter
*1/3 HP
*110V
*60HZ
*1/4inch Thick Grinding Wheel
*Cutting Surface: 4 x 4-1/2in
*Dimensions: 14 x 14 x 15inch
*Weight: 38lbs
*Heavy Duty
*Adjustable Work Table
*Full Radius Water Spray
*Reverable Grinding Wheel
*Hinged Door
*Made in USA
Compact Design Ideal Fit In The Close Quarters Of A Doctors
Office, or Laboratory. Performs Very Well In A Demanding Enviroment
Of Commerical Laboratory.
MODEL TRIMMERS 10in ( Handler )
Handler 10in Model Trimmer - 1/3HP
*The Professional 10in [25cm] diameter model trimmer
*Powered by a full 1/3 HP ball bearing
*Capacitor start motor
Features include:
*A swing open front housing for ease of cleaning and wheel changing
*Internal gutter and splines to facilitate water runoff
*Full wheel radius water spray for efficient wheel cleaning
*Drain trough which completely surrounds the model tray to prevent water leakage
* Large 1in [2.5cm] diameter water exhaust
* Motor cover with removable top plastic utility tray
*Unit shipped complete:
*Ready to use with minor set-up
*Finished with a durable, baked coating
Unit Dimensions: 16in depth x 13in wide x 12 3/4in high [41cm x 33cm x 32cm]
*Identaical features to the above trimmer execpt for lower torque feature for those
who perform fewer model trimming operations
Code
154
Price
+
101767
HANDLER - Model Trimmer 10in 1/3HP
Name
US$ 475.00
+Info
103344
US$ 461.16
+Info
21/05/2010 / 1284
Model Trimmers
Model Trimmers
RAY FOSTER - 101584 Model Trimmer 12in 1/2HP
US$ 677.70
MT12 Model Trimmer - 12in diameter [304mm] 1/3HP motor - 110V - 60Hz
- 1/4in [6mm] thickgrinding wheel - [R# MT12 ] - 5-1/4in [133mm] wide - 5in [127mm] high cutting surface
-Dimensons: Height: 17in [431mm] - Wide: 17in [431mm] - Depth : 16in [406mm] - Shippingweight: 49lbs -Heavy-duty capacitor motor start ball bearing motor - adjustable work table -fullradius water spray - reversible
grinding wheel - hinged door - manufactured in usa.
MODEL TRIMMERS 12in (Handler)
*A 12? [30cm] diameter Trimmer designed for the laboratory who trims plaster and stone models on a daily basis.
*Powered by a FULL 1/2 HP ball bearing
*Capacitor start motor
*Features a larger frontal opening
*Additional SFM (Surface Feet per Minute) grinding capacity to trim models faster and easier.
*Swing-open front housing with full wheel radius water spray
*Internal gutter and ?splines? for water diversion
*Surrounding drip trough
*Motor curve with utility tray which are standard features on all Handler Trimmers
*Make this trimmer an excellent addition to the working laboratory
Shipped complete:
*Ready to use with minor set-up
*Finished with a durable, baked coating
*Unit Dimensions: 16? depth x 15? wide x 14 1/2? high [41cm x 38cm x 37cm]
*Identical features to the model trimmer above except for the lower torque feature
Handler 12in model Trimmer - 3/4HP
*Designed for the lab who trims plaster and stone models on a daily basis
*Features larger frontal opening
*Additional surface feet per minute grinding capacity to trim models fasster and easier
*Rest of teh features are the same as the model trimmers above
Price
+
101766
Code
Name
US$ 550.40
+Info
101769
US$ 570.36
+Info
101765
US$ 689.00
+Info
103354
US$ 729.96
+Info
Model Trimmers
Orthodontic Mod. Trim.
21/05/2010 / 1284
155
Model Trimmers
RAY FOSTER - 101585 Ortho Model Trimmer 12in 1/2HP
US$ 877.50
MT15 Orthodontic Model Trimmer - 12in diameter [304mm] 1/3HP motor - 110V - 60Hz
- 1/4in [6mm] thickgrinding wheel - accessories - vertisquare - angle guide - 70mm adjustable gauge - [R#
MT15 ] - 5-1/4in [133mm]wide - 5in [127mm] high cutting surface
- Dimensons: Height: 17in [431mm] - Wide: 17in [431mm] - Depth : 16in[406mm]
- Shipping weight: 49lbs
- Equipped with the orthodontic angulating work table- 12in model trimmerspeeds trimming of study models and produces accurate and attractive results - work table made from hardenedanodized aluminium for a long
accurate work life - calibrated for precise positioning and trimming -
Model Trimmers
Replacement Parts
HANDLER - 103346 #3207GK Gasket Kit
US$ 29.82
#3207GK Gasket Kit - Includes gasket - cement - use on 10in and 12in models -
Models
Full mouth Customized
ECCO- 101263 1999 Flex Nat Model U&L 2pk
US$ 138.60
- Full 2009 Flexible Natural Dentition Model
- Set of 2 Upper and Lower - [V# 2009 ]
- For laboratory practice teaching students and schools- additonal preparations for all 28 teeth and plugs for
edentulous areas sold separatly
- Flexible model has many other functions - it gum memory like material - orthodontics the teeth can be
pushed out of position and they will relax back into occlusion within a short time -
ECCO- 101262 1999 Rigid Nat Model U&L 2pk
US$ 138.60
Full 2009 Rigid Natural Dentition Model - Set of 2 Upper and Lower
- [V# 2009 ] For laboratory practice teachingstudents and schools - additional preparations for all 28 teeth and
plugs for endentulous areas sold separatly.
- RigidModel is useful for demonstration of occlusion.
- Flossing technique since teeth move slightly- Natural epoxy toothmaterial is excellent for orthodontic bracket
bonding.
Models
Practice Models
ECCO- 101264 Prep #1 Edentulous Plug
US$ 5.00
Prep #1 Edentulous Plug - [V# 2009-P ] Tooth Preparations for Flexible Dentition Practice Model
Models
Tooth preparations
156
21/05/2010 / 1284
Models
Tooth preparations
MODELS FOR STUDENTS ( Ecco )
- ECCO produces standard and customized dental and anatomical models for a
variety of marketing, presentation, and communication applications.
- Our goal is to provide the dental profession with the finest models with great
prices
Price
+
101265
Code
ECCO - Prep #2 Occlusal Lingual - ...
Name
US$ 5.00
+Info
101266
ECCO - Prep #3 MOD - ...
US$ 5.00
+Info
101267
ECCO - Prep #3 3MO-B - ...
US$ 5.00
+Info
101268
ECCO - Prep # 3 7/8 Crown ...
US$ 5.00
+Info
101269
US$ 5.00
+Info
101270
ECCO - Prep #5 DO ...
US$ 5.00
+Info
101271
ECCO - Prep #5 MOD ...
US$ 5.00
+Info
101272
ECCO - Prep #11 Class V - ...
US$ 5.00
+Info
101273
ECCO - Prep #12 MOD Lingual - ...
US$ 5.00
+Info
101274
ECCO - Prep #13 Occlusal - ...
US$ 5.00
+Info
101275
ECCO - Prep #14 MO - ...
US$ 5.00
+Info
101276
US$ 5.00
+Info
101277
ECCO - Prep #19 MO ...
US$ 5.00
+Info
101278
ECCO - Prep #19 3/4 Crown ...
US$ 5.00
+Info
101279
US$ 5.00
+Info
101280
ECCO - Prep #24 Class III - ...
US$ 5.00
+Info
101281
ECCO - Prep #27 Class V - ...
US$ 5.00
+Info
101282
ECCO - Prep #29 DO - ...
US$ 5.00
+Info
101283
ECCO - Prep #30 MO - ...
US$ 5.00
+Info
101284
ECCO - Prep #30 3/4 Crown - ...
US$ 5.00
+Info
101285
US$ 5.00
+Info
Models
Tooth preparations Kits
ECCO - 101336 Crown Preparations Set 28pk
US$ 84.00
Prep Set 28 Crown Preparations Set - Tooth Preparations - Set of 28 teeth- For Flexible Dentition Models -
ECCO - 101338 Veneer Superior Prep 6pk
US$ 18.00
Prep Set of 6 Veneer Superior Preparations - Tooth Preparations - Set of 6 Teeth - For Flexible Dentition Models -[ # 2009-P ]
21/05/2010 / 1284
157
Models
ECCO - 101337 Fixed Prothesis Set 11pk
US$ 47.00
Prep Set of Fixed Prothesis Preparations
- Tooth Preparations -Set of 11 teeth for Flexible Dentition Models -Includes : [ elements 2 - 6 - 8 - 11 - 13 - 15
full crowns 7 - 14 edentoulous plugs - 30 19 and 3/4 crowns - 3MOD ]US$ 47.00ECCO -
Ovens Porcelain
Mufles for Porcelain Ovens
MUFFLE (Edg)
Price
+
54011
Code
EDG - Muffle for Alum Sintr 110-220v
Name
US$ 534.78
+Info
101446
EDG - Muffle for FV Plus Sint bi-vol
US$ 465.00
+Info
101305
EDG - Muffle for FV-Plus Auto bi-vol
US$ 465.00
+Info
100823
EDG - Muffle for ALUMINI 50 110-220v
US$ 534.78
+Info
MUFFLE ( Jelrus )
Price
+
101126
Code
JELRUS - Muffle for Jelrus Vista 110V
Name
US$ 508.00
+Info
102304
JELRUS - Muffle for Vip Vision Exe 500
US$ 476.65
+Info
102465
JELRUS - Muffle for VIP X-Press
US$ 699.00
+Info
107-149934
JELRUS - Muffle for Ceramat-S 110vol
US$ 595.00
+Info
107-ALPMU
JELRUS - Muffle for Alpha Plus 110V
US$ 485.00
+Info
107-JELMUF
JELRUS - Muffle for Jelrus Megastar
US$ 584.00
+Info
WIPMIX - 101387 Muffle for Pro Press 110V
US$ 740.00
Muffle-for Whipmix Pro Press 100 - 110V - Muffle chamber - 10 x 6 x 10 cm - muffle winding - spiral wound- quartz tubing -
158
21/05/2010 / 1284
Ovens Porcelain
MUFFLES ( Ney )
Price
+
103264
Code
NEY - Muffle for Ney 660 220volt - Automatic and manual - [ Mufla mufle ]
220v
US$ 580.00
+Info
103237
NEY - Cerampress Qex - Muffle CCFII- 120v [ Mufle Mufla ] [ parts-partes ]
120v
US$ 566.65
+Info
103239
NEY - Cerampress Qex - Muffle CCFII- 230v [ Mufle Mufla ] [ parts-partes ]
US$ 566.65
+Info
103236
NEY - Cerampress - Muffle CCFII- 120v [ Mufle Mufla ] [ parts-partes ]
US$ 566.65
+Info
103238
NEY - Cerampress - Muffle CCFII- 230v [ Mufle Mufla ] [ parts-partes ]
US$ 566.65
+Info
103255
NEY - JFF-2000/-525 Neycraft - Serv; Muffle Assy- 525/NC- 120v ...
US$ 307.79
+Info
103254
NEY - JFF-2000/525 / Neycraft - Serv; Muffle Assy- 525/NC- 100v ...
US$ 307.79
+Info
103256
NEY - JFF-2000/525 Neycraft - Serv; Muffle Assy- 525/NC- 220v ...
US$ 307.79
+Info
103257
NEY - JFF-2000/525 Neycraft - Serv; Muffle Assy- 525/NC- 240v ...
US$ 307.79
+Info
103261
NEY - Mark II - Muffle-for Mark2 - 110volt - [ Mufla mufle ]
US$ 595.00
+Info
103260
NEY - Mark II - Muffle-for Mark2 - 220volt - [ Mufla mufle ]
US$ 595.00
+Info
103259
NEY - Mark III - Muffle-for Mark3 - 220volt - [ Mufla mufle ]
US$ 595.00
+Info
103263
NEY - Mark IV - Muffle-for Mark4 - 110volt - [ Mufla mufle ]
US$ 595.00
+Info
103262
NEY - Mark IV - Muffle-for Mark4 - 220volt - [ Mufla mufle ]
US$ 595.00
+Info
103240
NEY - Miniglaze - Muffle Assy- MG 120v [ Mufle Mufla ] [ parts-partes ]
US$ 445.33
+Info
103241
NEY - Miniglaze - Muffle Assy- MG 230v [ Mufle Mufla ] [ parts-partes ]
US$ 363.69
+Info
103265
NEY - Muffle for Ney 660 110volt - Automatic and manual - [ Mufla mufle ]
US$ 580.00
+Info
103217
NEY - Centurion Q100 - Muffle Quartz Sleeve- Window 100/120v ...
US$ 489.72
+Info
103220
NEY - Centurion Q100 - Muffle Quartz Sleeve- Window 230v [ Mufle Mufla ] [ parts-partes ]
US$ 489.72
+Info
103223
NEY - Centurion Q100 - Muffle Quartz Spiral- Window 100/120v ...
US$ 566.65
+Info
103226
NEY - Centurion Q100 - Muffle Quartz Spiral- Window 230v [ Mufle Mufla ] [ parts-partes ]
US$ 566.65
+Info
103231
NEY - Centurion Q200 - Muffle Q200 100v [ Mufle Mufla ] [ parts-partes ]
US$ 580.69
+Info
103232
US$ 629.66
+Info
103233
US$ 629.66
+Info
103229
NEY - Centurion Q50 - Quartz Sleeve- No Window 100/120v [ Mufle Mufla ] [ parts-partes ]
US$ 370.85
+Info
103230
NEY - Centurion Q50 - Quartz Sleeve- No Window 230v [ Mufle Mufla ] [ parts-partes ]
US$ 426.75
+Info
103234
NEY - Centurion Qex - Muffle Centurion Qex 100/120v [ Mufle Mufla ] [ parts-partes ]
US$ 601.62
+Info
103235
NEY - Centurion Qex - Muffle Centurion Qex 230v [ Mufle Mufla ] [ parts-partes ]
US$ 601.62
+Info
103243
NEY - Vulcan 3-130 - Muffle Assy -130 Bivolt 110v 220v [ Mufle Mufla ] [ parts-partes ]
US$ 384.75
+Info
103252
NEY - Vulcan 3-1750 - Muffle Assy -1750 230v [ Mufle Mufla ] [ parts-partes ]
US$ 1,035.38
+Info
103253
NEY - Vulcan 3-1750A - Muffle Assy -1750A 230v [ Mufle Mufla ] [ parts-partes ]
US$ 1,035.38
+Info
103247
NEY - Vulcan 3-550 - Muffle Assy -550- 100/230v [ Mufle Mufla ] [ parts-partes ]
US$ 475.72
+Info
103245
NEY - Vulcan 3-550 - Muffle Assy -550- 120v [ Mufle Mufla ] [ parts-partes ]
US$ 489.72
+Info
103250
NEY - Vulcan 3-550A - Muffle Assy 3-550A- 230v [ Mufle Mufla ] [ parts-partes ]
US$ 537.60
+Info
103248
NEY - Vulcan 3-550PD - Muffle Assy 3-550PD- 120v [ Mufle Mufla ] [ parts-partes ]
US$ 490.64
+Info
103249
NEY - Vulcan 3-550PD - Muffle Assy 3-550PD- 100/230v [ Mufle Mufla ] [ parts-partes ]
US$ 490.64
+Info
103242
NEY - Vulcan A-130 - Muffle Assy -130 Bivolt 110v 220v [ Mufle Mufla ] [ parts-partes ]
US$ 384.75
+Info
103251
NEY - Vulcan A-1750 - Muffle Assy -1750 230v [ Mufle Mufla ] [ parts-partes ]
US$ 1,035.38
+Info
103246
NEY - Vulcan A-550 - Muffle Assy -550- 100/230v [ Mufle Mufla ] [ parts-partes ]
US$ 475.72
+Info
103244
NEY - Vulcan A-550 - Muffle Assy -550- 120v [ Mufle Mufla ] [ parts-partes ]
US$ 489.72
+Info
103218
NEY - Centurion VPC - Muffle Quartz Sleeve- Window 100/120v ...
US$ 489.72
+Info
103221
NEY - Centurion VPC - Muffle Quartz Sleeve- Window 230v [ Mufle Mufla ] [ parts-partes ]
US$ 489.72
+Info
103224
NEY - Centurion VPC - Muffle Quartz Spiral- Window 100/120v ...
US$ 566.65
+Info
103227
NEY - Centurion VPC - Muffle Quartz Spiral- Window 230v [ Mufle Mufla ] [ parts-partes ]
US$ 566.65
+Info
103219
NEY - Centurion VPM - Muffle Quartz Sleeve- Window 100/120v ...
US$ 489.72
+Info
103222
NEY - Centurion VPM - Muffle Quartz Sleeve- Window 230v [ Mufle Mufla ] [ parts-partes ]
US$ 489.72
+Info
103225
NEY - Centurion VPM - Muffle Quartz Spiral- Window 100/120v ...
US$ 566.65
+Info
103228
NEY - Centurion VPM - Muffle Quartz Spiral- Window 230v [ Mufle Mufla ] [ parts-partes ]
US$ 566.65
+Info
106956
NEY - Mark III - Muffle-for Mark3 - 120volt - [ Mufla mufle ]
US$ 595.00
+Info
21/05/2010 / 1284
Name
Voltage
159
Ovens Porcelain
Parts for ovens
Ovens Porcelain
Parts for ovens
NEY - 103401 CNT-Q50 Oring 9.25in Door
US$ 19.75
Centurion Serie - O-Ring 9.25in - -23.5mm - Diameter - Id Door Seal - [ Q-50 Q-100 Q-200 Q100 -Q200 ] [ Aro de sellado de puerta - Empaque
- Anillo goma ] [ replacement parts ]
NEY - 103935 CrmP-PCB Ass-Ctrl-Q50 Press
US$ 695.00
Cerampress - PCB Assembly- Control- Q-50 Press all voltages [ parts-partes ]
DISPLAY ( Ney )
Price
+
102855
Code
NEY - Centurion Serie - Assembly- PCB Display Q50/VPM [ parts-partes ]
Name
US$ 234.75
+Info
102858
NEY - Centurion Serie - Display PCB- VPC Ii Service [ parts-partes ]
US$ 378.60
+Info
102861
NEY - Centurion Serie - Service- PCB Assembly- Display Q100 [ parts-partes ]
US$ 333.10
+Info
102996
NEY - Vulcan - Display PCB- 3 Stage [ parts-partes ]
US$ 242.25
+Info
103317
NEY - Vulcan - Display PCB- 6 Stage [ parts-partes ]
US$ 257.40
+Info
ECCO - 102502 ECCO Digital Temp Controler
US$ 160.00
ECCO Digital Temp Controler for Dig furnace fort 110v 220 v
PCB Control Boards ( Ney )
Code
160
Price
+
102856
NEY - Centurion Serie - Control PCB- 100v VPM Service [ parts-partes ]
Name
US$ 537.60
+Info
102857
NEY - Centurion Serie - Control PCB- 200v VPM Service [ parts-partes ]
US$ 537.60
+Info
102862
NEY - Centurion Serie - Control PCB- Q100 120v-Service [ parts-partes ]
US$ 719.25
+Info
102863
NEY - Centurion Serie - Control PCB- Q100 230v-Service [ parts-partes ]
US$ 719.25
+Info
102864
NEY - Centurion Serie - Control PCB- Q50 120v Service [ parts-partes ]
US$ 635.95
+Info
102865
NEY - Centurion Serie - Control PCB- Q50 230v Service [ parts-partes ]
US$ 635.95
+Info
102859
NEY - Centurion Serie - Control PCB- Serv VPC Ii 125V [ parts-partes ]
US$ 635.95
+Info
102860
NEY - Centurion Serie - Control PCB- Serv VPC Ii 200v [ parts-partes ]
US$ 635.95
+Info
102867
NEY - Centurion Serie - PCB Assembly- Control- QEX 120v [ parts-partes ]
US$ 976.70
+Info
102868
NEY - Centurion Serie - PCB Assembly- Control- QEX 230v [ parts-partes ]
US$ 953.95
+Info
102869
NEY - Centurion Serie - Service- PCB Assembly- Encoder [ parts-partes ]
US$ 79.95
+Info
102918
NEY - Cerampress - Control PCB- CCFii- Serv. 230v [ parts-partes ]
US$ 734.75
+Info
102917
NEY - Cerampress - Control PCB- CCFii- Serv.120v [ parts-partes ]
US$ 734.75
+Info
102916
NEY - Cerampress - PCB Assembly-CCF Display [ parts-partes ]
US$ 280.15
+Info
102919
NEY - Cerampress - PCB Assembly- Control- QEX Press 120v [ parts-partes ]
US$ 976.70
+Info
102920
NEY - Cerampress - PCB Assembly- Control- QEX Press 230v [ parts-partes ]
US$ 976.70
+Info
102921
NEY - Cerampress - Service- PCB AssemblyEncoder [ parts-partes ]
US$ 79.95
+Info
102960
NEY - Miniglaze-2 - Service- Miniglaze/3 PCB- 120v [ parts-partes ]
US$ 310.40
+Info
102961
NEY - Miniglaze-2 - Service- Miniglaze/3 PCB- 230v [ parts-partes ]
US$ 310.40
+Info
102999
NEY - Vulcan - Control PCB- 3- 120v [ parts-partes ]
US$ 817.70
+Info
103000
NEY - Vulcan - Control PCB- 3- 230v [ parts-partes ]
US$ 817.70
+Info
103004
NEY - Vulcan - Control PCB- 3-550Pd- 120v [ parts-partes ]
US$ 817.70
+Info
103048
NEY - Vulcan - Control PCB- 6 Stage 100/120v [ parts-partes ]
US$ 507.35
+Info
103049
NEY - Vulcan - Control PCB- 6 Stage 220/240v [ parts-partes ]
US$ 507.35
+Info
21/05/2010 / 1284
Ovens Porcelain
Parts for ovens
102997
NEY - Vulcan - Control PCB- A-130 100-125V [ parts-partes ]
US$ 204.50
+Info
103258
NEY - Vulcan - Control PCB- A-130 200-250v [ parts-partes ]
US$ 204.50
+Info
103315
US$ 204.50
+Info
102998
NEY - Vulcan - Control PCB- A-550 100-125V [ parts-partes ]
US$ 204.50
+Info
103314
US$ 204.50
+Info
Ovens Porcelain
Thermocouples
EDG - 30699 Alumine 50 Thermocouple
US$ 97.74
Alumina 50 Thermocouple -150mm - [E# 30699 ] thermocuple tipo K para alumini 50
WHIPMIX - 101752 Pro Press 100 Thermocouple
US$ 402.56
WhipMix Pro Press 100 Thermocouple insulated
EDG - 30697 Sinter Thermocouple
US$ 235.08
Sinter Thermocouple - for Sinter Plus - Alumini Sinter - Ceram Sinter - [E# 30697 ] thermocuple de plantina
JELRUS- 100825 Thermocuple for Jelruinfinity
US$ 89.00
Thermocuple for Jelrus Burnout furnace Infinity L30 M30
THERMOCUPLES ( Ney )
Price
+
103190
Code
NEY - 660-Thrmcpl Ass-MK3
US$ 167.89
+Info
103198
NEY - Cent Q100-Ser-Thrmcpl Ass-Q200
US$ 167.89
+Info
103199
NEY - Cent Q200-Ser-Thrmcpl Ass-Q200
US$ 167.89
+Info
103197
NEY - Cent Q50-Ser-Thrmcpl Ass-Q200/
US$ 167.89
+Info
103201
NEY - Cent Qex-Ser-Thrmcpl Ass-QEX
US$ 305.52
+Info
103195
NEY - Cent VPC-Ser-Thrmcpl Ass-Q200/
US$ 167.89
+Info
103196
NEY - Cent VPM-Ser-Thrmcpl Ass-Q200/
US$ 167.89
+Info
103202
NEY - Crmp Qex-Ser-Thrmcpl Ass-QEX
US$ 305.52
+Info
103200
NEY - CrmP-Ser-Thrmcpl Ass-Q200/CCFI
US$ 167.89
+Info
103194
NEY - Mark Iv-Thrmcpl Ass-SF/MK4
US$ 167.89
+Info
103189
NEY - MarkIII-Thrmcpl Ass-MK3
US$ 167.89
+Info
103203
NEY - Mngl-Thrmcpl Ass-MGA
US$ 52.30
+Info
103208
NEY - Ney 2-160-Thrmcpl Ass-Ser II &
US$ 45.18
+Info
103207
NEY - Ney 2-90-Thrmcpl Ass-Ser II &
US$ 45.18
+Info
103210
NEY - Ney 2/6-1350-Thrmcpl Ass-Ser I
US$ 45.18
+Info
103209
NEY - Ney 2/6-525-Thrmcpl Ass-Ser II
US$ 45.18
+Info
103212
NEY - Ntrnc-Thrmcpl Ass-Ser II & 175
US$ 45.18
+Info
103211
NEY - Nycrf-Thrmcpl Ass-Ser II & 175
US$ 45.18
+Info
103192
NEY - Starfire-Thrmcpl Ass-SF/MK4
US$ 167.89
+Info
103191
NEY - Sunfire-Thrmcpl Ass-SF/MK4
US$ 167.89
+Info
103193
NEY - System 8-Thrmcpl Ass-SF/MK4
US$ 167.89
+Info
9490073
NEY - Thermocouple Mark III 660
US$ 240.00
+Info
103204
NEY - Vlcn-130-Thrmcpl Ass-130-550
US$ 52.77
+Info
103206
NEY - Vlcn-1750-Thrmcpl Ass-Ser II &
US$ 45.18
+Info
103205
NEY - Vlcn-550-Thrmcpl Ass-130-550
US$ 52.77
+Info
21/05/2010 / 1284
Name
161
Ovens Porcelain
Ovens Porcelain
JELRUS-33850 PDQ Pretty Darn Quick Med 110V
US$ 1,105.00
JELRUS PDQ MEDIUM ONE STAGE
*110V
* Pretty Darm Quick
*One Stage
*Fast Fire Burnout Furnace
Ovens Porcelain
Accesories for ovens
ECCO - 103890 Purge All for oven 1/2lb
US$ 23.78
Purge All
Decontaminator for Porcelain Furnaces
- Enough for 25 cleanings - 2 stage cleaning 5 min Purge All, 5 min Purge All Plus. This product is the PURGE
ALL.
- For PFM Frameworks - Our engimeers developed Purge All to act as a oxige and contamination
sponge targeting specific ions found in delay alloys.
- Purge All absorbs and eliminates furnace contaminant's more effectively than carbon.
- When used on a regular basis Purge All eliminates porcelain discoloration, extends muffle and thermocouple
life and maintains thermocoupe accurancy.
ECCO - 103892 Purge All Kit for oven 2x1/2lb
US$ 42.00
Purge All Plus/Purge All
ALL PLUS . Complete Kit
- For PFM Frameworks - Their engimeers developed Purge All to act as a oxige and contaminationsponge
targeting specific ions found in delay alloys.
- Purge All absorbs and eliminates furnace contaminant's more effectively than carbon.- When used on a regular
basis Purge All eliminates porcelain discoloration, extends muffle and thermocouple life and maintains
thermocoupe accurancy.
ECCO - 103889 Purge All Plus for oven 1/2lb
US$ 23.78
Purge All Plus
ALL PLUS .
- For PFM Frameworks - Their engimeers developed Purge All to act as a oxige and contaminationsponge
targeting specific ions found in delay alloys.
- Purge All absorbs and eliminates furnace contaminant's more effectively than carbon.
- When used on a regular basis Purge All eliminates porcelain discoloration, extends muffle and thermocouple
life and maintains thermocoupe accurancy.
NEY-007-9982561 Specialty Wires Calibration Ki
US$ 95.00
Specialty Wires Calibration Kit- Silver (100 Pieces) Calibracion Temperatura
162
21/05/2010 / 1284
Ovens Porcelain
ECCO - 103891 Zirconia Decontam ZR 1/2 lb
US$ 52.61
Purge ZR
Zirconia Decontaminator for your porcelain furnace
- Purge All ZR is a unique double activated ion and oxide absorbing material especially manufactured to
eliminate all contaminates that can cause discoloration and porcelain delamination in Zirconia copings.
- Low levels of radioactive materials found in Zirconium can build up inside a muffle and cause color problems.
- These radioactive isotopes are absorved completely out of the furnace.
- Purge All ZR will extend muffle/thermocouple life and maintain thermoucouple accurancy.
Ovens Porcelain
Burnout ovens
DLS - 103827 500-S Burnout oven 110v
US$ 890.00
500-S BURNOUT OVEN - 110V
*This furnace features an Paktronics automatic control with indicator
*A stainless steel oven shell
*Delivers reliability and durability without the addition of flashy and costly items.
*For a long time, the 500S has remained a favorite with many laboratories.
*And with the complexity of today's ovens, Dental Techs still love the simplicity of its design
Technical Specifications
*Pactronics Automatic control with indicator
*Temperature range : 0-2000 degrees F
*Great accuracy in temperature
* Temperature set Buzzer
*External size : 14in x 17in x 12in
*Chamber 5.75in x 4in x 6.5in ( 150mm x 430mm x 165mm ]
CFS - 101589 CFS Digital Furnace 110V-220V
US$ 588.00
DIGITAL FURNACE
*110V and 220V
*Designed to Melt Flexible Products in Under 11 Minutes
JELRUS-100051 Infinity L30 multi-stag 110V
US$ 1,437.00
- Infinity multi-stage burnout furnaces
- Infinity L30 and P.D.Q. digital large each have 4 radiant heating plates.
- They are designed for maximum versatility, can be used for a 1, 2, 3 or 4-stage burnout procedure and have
a memory for 1-30 "open" easy to use programs.
- The L30 can heat up, cool down and have a "Ready-Set-Go" smart overnight timer.
21/05/2010 / 1284
163
Ovens Porcelain
Burnout ovens
JELRUS-100050 Infinity M30 multi-stag 110V
US$ 1,268.00
-Infinity M30 and P.D.Q. digital medium each have 2 radiant heating plates.
-They are designed for maximum versatility, can be used for a 1, 2, 3 or 4-stage burnout procedure and
have a memory for 1-30 "open" easy to use programs.
-The M30 can heat up, cool down and have a "Ready-Set-Go" smart overnight timer.
JELRUS-33900 Pdq Pretty Darn Quick Lg
110V
US$ 1,235.00
- PDQ Digital Single-StageThe P.D.Q. Digital burnout furnaces are fully automatic,
designed for single stage use and have a memory for one complete program.
- They are available in two sizes: medium and large.
- Both feature a large display and time-line graph which show current burnout
conditions and program progress from start to finish.
VULCAN BURNOUT 3 STAGE ( Ney )
- The prefix refers to the Controller 'A' for Analog, Single Set Point
'D' for Single Set Point Digital Control
'3' for Digital 3 Stage Programmable Control
- 130-550 & 1750 :
- The numeral refers to the Chamber INTERNAL size in cubic inches 130, 550 and 1750.
FOR OTHER DIMENSIONS AND TECH DATA PLEASE REFER TO THE DATA SHEET BELOW , THE PICTURES
AVAILABLE AND POR THE DOWNLOAD BROCHURES INSIDE EACH ITEM.
Items 9493303 - 9493909 - 9493658 Please refer to the 110v descriotions adding 65 us$ for being 220 volts
Stages
Weight
Price
+
9493302
Code
NEY - Vulcan Multi-Stage 3-130 110V
Name
120x140x130(mm)
Muffle Size
510x350x290(mm)
Ext Size
One
35 lbs
9493302
Manuf #
US$ 1,609.86
+Info
9493308
NEY - Vulcan Mulit-Stage 3-550 110V
180x230x230(mm)
630x430x400(mm)
One
62 lbs
9493308
US$ 1,896.62
+Info
100888
NEY - Vulcan Multi-Stage 3-1750 220v
250x360x320(mm)
815x541x610(mm)
One
148 lbs
9493409
US$ 3,715.06
+Info
VULCAN BURNOUT ANALOG ( Ney )
- The prefix refers to the Controller
- 'A' for Analog, Single Set Point
- 'D' for Single Set Point Digital Control
- '3' for Digital - 3 Stage Programmable Control
- 130-550 & 1750 :- The numeral refers to the Chamber INTERNAL size in cubic inches 130, 550 and 1750.FOR
OTHER DIMENSIONS AND TECH DATA PLEASE REFER TO THE DATA SHEET BELOW , THE PICTURES
AVAILABLE AND POR THE DOWNLOAD BROCHURES INSIDE EACH ITEM.
164
21/05/2010 / 1284
Ovens Porcelain
Burnout ovens
Stages
Weight
Price
+
9493300
Code
NEY - Vulccan Analog A-130 110V
Name
120x140x130(mm)
Muffle Size
510x350x290(mm)
Ext Size
One
35 lbs
9493300
Manuf#
US$ 1,045.00
+Info
9493306
NEY - Vulcan Analog A-550 110V
180x230x230(mm)
630x410x400(mm)
One
60 lbs
9493306
US$ 1,210.00
+Info
VULCAN BURNOUT DIGITAL ( Ney )
- The prefix refers to the Controller 'A' for Analog, Single Set Point
'D' for Single Set Point Digital Control
'3' for Digital - 3 Stage Programmable Control
- 130-550 & 1750 :
- The numeral refers to the Chamber INTERNAL size in cubic inches 130, 550 and 1750.FOR OTHER DIMENSIONS
AND TECH DATA PLEASE REFER TO THE DATA SHEET BELOW , THE PICTURES AVAILABLE AND POR THE
DOWNLOAD BROCHURES INSIDE EACH ITEM.
Code
Name
Stages
Weight
Price
+
101362
NEY - Vulcan Dig Sing P.D-130 110V
120x140x130 (mm)
Muffle Size
510x350x290 (mm)
Ext Size
One
35 lbs
9495120
Maufn #
US$ 1,094.49
+Info
101363
NEY - Vulcan Dig Sing P. D-550 110V
180x230x230(mm)
630x410x400(mm)
One
60 lbs
9495130
US$ 1,251.14
+Info
Ovens Porcelain
Porcelain Ovens
EDG -100454 ALUMINI 50 Porc Furn
110v-220v
US$ 2,550.00
EDG-ALUMINI-50 Porcelain Furnace
110Volts -220Volts
- Fully Automatic
- Automatic electric up/down platform
- 50 Customizable Programs
- Quartz Muffle
- Numeric Display
- 3 Platforms
- Fast Cooling - Vacuum pump Not included
- Instruction Manual
- dimensions : 22inches tall x 12 wide x 13.5 deph [ Shipping info
20x22x32 inches 43 lb ] [ in wood craddle 22x24x26 inches and 67 lb]
Warranty ONE year warranty on the melectronic and 2 years on the muffle
sMade in Brasil - Warranty in the US.
21/05/2010 / 1284
165
Ovens Porcelain
Porcelain Ovens
EDG- 200185 ALUMINI SINTER PRESS
110v-220v
US$ 4,205.00
EDG Sinter Press - w/o vacuum pump
Triple function : Regular Porcelain - Pressable porcelain and Sinterization of
alumina and Alumina/zirconia composites
110volts / 220 volts swhitchable
Quartz muffle with thermal insulation ceramic mat molded through low
thermalmass vacuum, which insures perfect temperature homogeneity.The
exclusive system S.A.L.V Sistema de aquecimento de longa vida (long
lifeheating system)
Muffle forced ventilation for the sintering/infiltration process which
eliminatesstains and minimizes fissures.99 programs: 79 for ceramic and 20
for sintering/infiltration.Management by microprocessing.
. Easy operation and visualization of the burning parameters.
Ambient working temperature at 1,100C for ceramic and at 1,200C
forsintering/infiltration.
Maximum temperature limiter at 1,200CLinear decimal heating speed from
0.1 to 70.0C/min.
Thyristored power control
Ceramic burn time from 0 to 30 minutes.Sintering/infiltration time from 0 to 9
hours 59 minutes.
Decreasing time visualization.Vacuum time from 0 to 30 minutes with
decreasing visualization.
Automatic or manual (which can be activated ant any stage of the
process)vacuum operationProgrammable and independent ascending and
descending elevator times.
Safety systems protect the equipment from operation mistakes or defects.
Flashing and beeping signs of all process steps.To avoid ambience heating
and save energy, an alarm will sound after 5 minutes ifthe equipment is not
being operated the muffle will be partially closedautomatically.
Night Mode: after 2 hours without any operation, the muffle is closed and
thetemperature is kept at 100C.
Programmable quick cooling.
Operation time totalizer.
Low cost muffle replacing system.
Elevator with bottom entrance perfectly balancedElectronic system forced
ventilation keeps the components safe.
ARGON SYSTEM, allows the cleaning and helps with ceramic burn
emphasizingits colors, enhancing the translucence and opalescence.Serial
communication for maintenance and system checking.Temperature safety
devices, temopar, vacuum, elevator, power, muffle withS.A.L.V system, piston
and compressed air system.
Digital panel in liquid crystal with 4 lines by 20 columns on a blue
background.with BACKLIGHT. Blue backgroundSensitive membrane with sound recognition of the operator's touch.
Specification:- State-ofthe-art micro processed control MOTOROLA.- SMD
electronic circuit cards- Liquid crystal display Power = 1800 Watts.- Power
supply: 110 or 220 volts. 50/60 Hz. Under request- Fuses: 20 amperes to 110
volts, 15 amperes to 220 volts.- RS-232 communication for technical
assistance.- Alphanumeric keyboard with 39 programms and monitoring keys.Maximum operation temperature: 1200C- Nominal working pressure 60 Lbf /
in2 (Piston)- Nominal vacuum work 27 in Hg. / mm Hg.
Shipping information : - Gross weight.........28.5Kg
Made in Brasil - Us Warranty 2 years including the muffle
NEY - 9493930 Centurion Q50 Porc Furn 110v
US$ 3,250.00
- Ney Centurion Q50
- 50 Programs
- 110V
- Quartz Sleeve
- With original vacuum pump included (oilless)
- 2 year warranty
- Oven Dimensions: 21 x 18 x 17in
- Weight: 55lb
- Pump Dimensions: 14 x 11 x 12in
- Weight:22lb
- THIS FURNACE HAS BEEN DISCONTINUED AND IS BEING REPLACED WITH "CERAM FIRE S"
166
21/05/2010 / 1284
Ovens Porcelain
Porcelain Ovens
NEY - 9494305 Centurion QEX Porc Furn 110v
US$ 4,095.00
NEY CENTURION QEX - 110V
The Qex is the most advanced unit in the popular Centurion line of vacuum porcelain furnaces. With the added
features of alphanumeric program names, program memory cards and security locking, the Centurion Qex
provides the flexibility to grow with your business. At the heart of the Qex is a fast-cooling quartz spiral muffle that
ensures superior heat distribution and extended life.
Features:
- Numeric program names
- Graphic display
- Absolute vacuum control
- With original vacuum pump included (oilless)
- Continuous step technology
- Advanced temperature control
- Programmable muffle position and speed
- Large, stable work platform (10cm/4")
- Quartz spiral muffle
- Closed muffle drying/cooling
- 100 Conventional porcelain programs
- Memory card for program backup, and parameter loading
- User selectable listing of only desired programs
- Programmable idle time for closing muffle
- Programming mode for experimental programs
- InCer card for sintering ceramics (InCeram)
- Optional Security code for program locking
- Multilingual (English, Spanish and Italian)
- Auto purge
- "Energy Saver" feature
- Diagnostics for easy troubleshooting
- Auto idle mode
- Power failure and runaway protection
- Internal surge/spike protection
- oC to oF conversion
- Programmable night mode temperature
- Full Two-year Warranty
- Made in USA
- Graphic LCD
NEY - 9494300 Cerampress Q50 Porc Furn 110v
US$ 4,100.00
NEY Cerampress Q50 - 110volts - 50 programs - Quartz Spiral - w/vacuum pump included - [ Press porcelain
furmace - ] - Made in USA - 2 years full warranty - Porcelain Furnace CERAMPRESS Q-50
The value leader for pressing furnaces, the CeramPress Q50 offers superior, cost-effective
performance for pressable ceramic applications.
Features
- Single Function Furnace
- Porcelain Pressing
- Usable With All Pressable Ceramics
- 1200C Maximum Temperature
- With original Vaccum Pump included (Oilless)
- 50-Program Memory
- Quartz Spiral Muffle
- Enhanced Temperature Stability
- Designed for Dedicated Pressing
- Suitable for High and Low Temperature Pressing
- Fast Cooling
- Automatic Open at Cycle Completion
- Auto Calibration, Auto Purge, Auto Night Mode
- Internal Surge/Spike Protection
- C to F Conversion
- 100 or 200 Gram Ring Capacity
21/05/2010 / 1284
167
Ovens Porcelain
Porcelain Ovens
NEY - 9494310 Cerampress QEX Porc Furn 110v
US$ 4,599.00
NEY Cerampress QEX - 110volts - 100 programs - Quartz Spiral - w/vacuum pump included - [ Press
porcelain furmace - ] - Made in USA - 2 years full warranty - Porcelain Furnace [ q100-q-100]Our best
full-featured all-ceramic pressing furnace. If you are starting or expanding an all-ceramic
department, CeramPress Qex should be part of your system. CeramPress Qex is engineered for
quality and performance, and is versatile enough to be compatible with all pressable ceramics and
conventional porcelains.
Features
- Usable with all pressable ceramics
- Full porcelain firing capabilities
- Alphanumeric program names
- Memory card for program backup and parameter loading
- Security code for program locking
- Quartz spiral muffle
- Fast cooling
- Automatic open at cycle completion
- Continuous or cycling vacuum pump operation
- Bright, easy-to-read graphic display
- Enhanced temperature stability
- Program override 6 User-defined pressing programs 100 Conventional porcelain programs
- Programmable idle time for closing muffle
- Programming mode for experimental programs
- InCer card for sintering ceramics (InCeram)*
- Optional Multilingual (English, Spanish and Italian)
- Muffle position control/feedback Integrated pressing systems and cycles Internal surge/spike
protection
- Built-in diagnostics
- Programmable night mode temperature
- Full Two-year Warranty
- User-friendly interface 100-200 gram ring capacity
- Auto calibration and auto purge Night mode
168
21/05/2010 / 1284
Ovens Porcelain
Porcelain Ovens
ECCO - 106821 Classical Porcelain Furn 110V
US$ 2,200.00
Model - Classical
- All-Ceramics firing capabilities
- Classical Furnace - the Muffle ( Furnace Head ) moves upwards and downwards
- Vacuum Pump (Oil Free)
- Special design guarantees excellent sealing of the furnace
- Max.temperature:130 C
- Max.firing time:150min
- Auto purge - Auto night mode
- Temperature calibration by keypad
- Chinese or English panel
- Multi-display window for better readability
- Max. setting vacuum: -97Kpa
- Voltage: 22OV/110V 10%, 50Hz/6oHz
- Wattage: 1500 150watt
- Net weight - 28kg
- Dimensions: 4302590 or 620mm ( L )
- CE Marking; ISO900; ISO14001
EDG- 100651 FV PLUS SINTER-Auto
110v-220v
US$ 2,687.00
EDG- FV-PLUS-SINTER Auto
Porcelain & Sinter Alumina Furnace
- 110 220 volts switchable
- Automatic muffle
- 50 customizable programs
+ 100% Manual funtion option
- Quartz Muffle
- Numeric Display
- Salv System
- Instruction manual in English
- Long time sinterization programs
- Vcuum pump Not included - SALV System ( EDG patented system) Tech support & Warantee
Shipping information 20*16*19 45lb
MADE IN BRASIL - - 2 years warranty on the muffles -
JELRUS- 106677 Jelrus Vip Univers Furn 220V
US$ 3,499.00
- The VIP Universal multi-purpose porcelain furnace exceeds the highest standards for current and future
applications.
- VIP Universal has the ability to optimize the appearance of porcelain fused to metal and All-Ceramic type
restorations by providing superior levels of esthetics.
- With original Vaccum Pump included (Oilless).
- A large widescreen display is featured for viewing all program data, information and progress from start
through finish on any of the 100 easy to use free-styleopen programs.
- The VIP Universal is specifically engineered to meet the individual needs of todays dental laboratory
professional and is designed for universal use with all lowand high fusing porcelains as well as very high
temperature ceramics.
- Electrical: 120 V, 13.7 A, 1644 W, 50/60 Hz PN A4500100 V, 18.0 A, 1800 W, 50/60 Hz
-Dimensions: 15" W x 16" D x 22.63" H38.10 cm W x 40.64 cm D x 57.48 cm
- Weight: 52 lbs. (23.6 kg)Muffle: 3.95" (10.03 cm)
- Diameter- Height 3.25" (8.26 cm)
- Maximum Temperature: 2200F (1204C)
21/05/2010 / 1284
169
Ovens Porcelain
Porcelain Ovens
EDG- 100188 FV-PLUS-Auto 110v-220v
US$ 2,544.30
FV-PLUS-Auto
110v-220v
- Automatic Vacuum Porcelain Furnace
- Automatic muffle
- 50 customizable prog &
- 100% Manual funtion option
- Quartz Muffle
- Numeric Display
- 2 plataforms
-Fast cooling system
Instruction manual - Tech support and warranty Ahorro de energia - SALV
System ( EDG patented system) - Vcuum pump Not included - MADE IN
BRASIL - WWW.EDG.COM.BR - ( EDG is the bigest furnace
manufacturer in Brasil ) Furnaces : also with two year warranty on the
muffles - US Warranty -
JELRUS- 100514 Jelrus Vip Univers
Furn 110V
US$ 3,474.00
- The VIP Universal multi-purpose porcelain furnace exceeds the
highest standards for current and future applications.
- VIP Universal has the ability to optimize the appearance of
porcelain fused to metal and All-Ceramic type restorations by
providing superior levels of esthetics.
- With original Vaccum Pump included (Oilless).
- A large widescreen display is featured for viewing all program data,
information and progress from start through finish on any of the 100
easy to use free-styleopen programs.
- The VIP Universal is specifically engineered to meet the individual
needs of todays dental laboratory professional and is designed for
universal use with all lowand high fusing porcelains as well as very
high temperature ceramics.
- Electrical: 120 V, 13.7 A, 1644 W, 50/60 Hz PN A4500100 V, 18.0 A,
1800 W, 50/60 Hz
- Dimensions: 15" W x 16" D x 22.63" H38.10 cm W x 40.64 cm D x
57.48 cm
- Weight: 52 lbs. (23.6 kg)Muffle: 3.95" (10.03 cm) Diameter
- Height 3.25" (8.26 cm)
- Maximum Temperature: 2200F (1204C)
170
21/05/2010 / 1284
Ovens Porcelain
Porcelain Ovens
ECCO - 106820 New Cent Porcelain Furn 110V
US$ 2,200.00
Model - New Century
- All-Ceramics firing capabilities
- Special design guarantees excellent sealing of the furnace
- Vacuum pump (Oil Free)
- Max.temperature:1305 C
- Max.firing time:150min
- Auto purge; Auto night mode
- Temperature calibration by keypad
- Chinese or English panel
- New Century Furnace - The Firing Tray moves upwards and downwards - LED firing graphics
reveal the current stage
- Max. setting vacuum: -97Kpa
- Voltage: 22OV/110V 10%, 50Hz/6oHz
- Wattage: 1500 150watt
- Net weight - 28kg
- Dimensions: 4302590 or 620mm ( L )
- CE Marking ISO9001
WHIP MIX - 102497 PRO 200 Porc Furn 110V
US$ 3,561.00
The Pro 200 and the Pro Press 200 Porcelain Furnaces are affordable yet intelligently designed with
cutting edge technology. They have advanced cycles for e.max , In Ceram, Wol-Ceram, Captek,
sintered alloys and advanced porcelain products. All Pro Series Porcelain Furnaces come standard with a
Vacuum Pump and a 3-Year Warranty or 3,750 muffle hours on unit (US & Canada only).
Features:
- 200 Program Memory Expanded memory and faster logic board allows the user to use a multitude of
porcelains
- Quick-Cool Jet cools the muffle twice as fast
- Pro 200 Master Suite New graph-based application that enables user to create, modify, print and transfer
programs to furnaces straight from their PC.
- USB Port transfer programs and upgrades with a standard Flash Drive, (1) 1GB included. * Larger
Easy Read LCD Screen provides four lines of 20 characters
- Membrane Keys for keypad durability and less wear
- Detent Knob with Built-In Select Switch allows for faster and more convenient programming
- Improved Muffle More insulation than previous Pro Series to save energy and costs. Rated to 2200F
- Upgraded Thermocouple for unsurpassed accuracy
- Pro Press 200 can accommodate 100, 200, and 300 gram rings for more flexibility
WHIP MIX - 102496 PRO-PRESS 200 Porc Furn 110V
US$ 4,444.00
The Pro 200 and the Pro Press 200 Porcelain Furnaces are affordable yet intelligently designed with
cutting edge technology. They have advanced cycles for e.max , In Ceram, Wol-Ceram, Captek,
sintered alloys and advanced porcelain products. All Pro Series Porcelain Furnaces come standard with a
Vacuum Pump and a 3-Year Warranty or 3,750 muffle hours on unit (US & Canada only).
Features
- 200 Program Memory Expanded memory and faster logic board allows the user to use a multitude of
porcelains
- Quick-Cool Jet cools the muffle twice as fast
- Pro 200 Master Suite New graph-based application that enables user to create, modify, print and transfer
programs to furnaces straight from their PC.
- USB Port transfer programs and upgrades with a standard Flash Drive, (1) 1GB included. * Larger
Easy Read LCD Screen provides four lines of 20 characters
- Membrane Keys for keypad durability and less wear
- Detent Knob with Built-In Select Switch allows for faster and more convenient programming
-Improved Muffle More insulation than previous Pro Series to save energy and costs. Rated to 2200 F
- Upgraded Thermocouple for unsurpassed accuracy
- Pro Press 200 can accommodate 100, 200, and 300 gram rings for more flexibility
21/05/2010 / 1284
171
Ovens Porcelain
Porcelain Ovens
JELRUS - 102503 VIP X- PRESS Univer 110vol
US$ 4,170.00
Presenting the combination porcelain/pressable furnace.
- Also Available in 220 Volts
- The VIP UniversalX-Press features a triple-axis precision temperature control, large widescreen
displays, a frontalpressure gauge for easy viewing, plus an active display of the plunger position
during the presscycle.
- The VIP Universal X-Press will accommodate up to 15 grams per 300 gram ring and hasbroad
capability to press to aluminum oxide, zirconium and metal.
- The rapid entry transportsystem keeps pressing rings hot.
- The VIP Universal XPress is specifically engineered for hightemperature ceramics, and all low and
high fusing porcelains.
Caracteristics
- High performance muffle.
- Extraordinary, beautiful porcelain.
- 100 easy-to-use and see programs: 20 open pressable and 80 open free-style.
- Large widescreen visual display shows program name, all program parameters, individual
settings, program progress and actual muffle conditions (program number, temperature, vacuum,
time).
- Press position, active display: plunger position during press cycle (inches or centimeters). Frontal easy view pressure display 0-100 PSI (0-6.9 BARs).
- 5.0 Multi-layered high temperature muffle Crystalline Quartz Technology
- Highest Grade crystalline quartz
- Fused Quartz
- Alumina Oxide
- Fibrous Alumina
Ovens Porcelain
Separated Ovens for Flexibles
ECCO - 101346 ECCO Digital Oven 4 Cart 110V
US$ 588.00
ECCO DIGITAL OVEN
*110V
*Digital Control
*4 Cartridges
*1 Year Warranty
*Made in USA
*Great Precision
Ovens Porcelain
Sinterization Ovens
172
21/05/2010 / 1284
Ovens Porcelain
Sinterization Ovens
ECCO- 103900 Aut Digital Sint oven for Zi
US$ 6,200.00
ECCO ZIRC AUTOMATIC DIGITAL SINTERIZATION FURNACE
Sintering FurnaceModel: 3F
?Selectable program timing; auto running; Power saving
?14 fixed programs for select; 6 programs can be edited by user
?High quality muffle never stains the crown
?High definition LCD
?Long service lift of heating element.
?High efficiency; the two saggers can be placed in the chamber
?The muffle adopts the imported refractory fiber to save 30% energy.
?Avoid opening chamber because of faulty operation; protect the heating element
*Open Programs with Great Versatility For All Zirconia Blocks
* Long Lasting Heating elements : Molybdenum disilicide (MoSi2)
Pinsetters - Pindex
BUFFALO-008-39000 Buffalo Laser Pinsetter 110V
US$ 742.00
Buffalo Laser Pinsetter Powerrite
- 110V Laser Light beam indicator for accurate pin location
-Ergonomic design for both standing and sitting operators
- High Speed motor - Auto On/OffSwitch - Uses all types of Drills
- Counter sunk -P- type drill includes
- All Metal construction -Sealed Housing 120vol (Adj. Depth Drilling- Auto Start- 1/8 Id Chuck) (Idem Pindex kit
)
-PindexMaquina )( Shipping weight = 13x13x20 9Lbs ]
ECCO - 100931 ECCO Laser Pinsetter 110V
US$ 350.00
ECCO Laser Pinsetter
- 110-220volts
- Laser Light beam indicator for accurate pin location
- High Speed motor
- Adj. Depth Drilling- Uses the regular standard Pindex drills
- Counter sunk P" type drill - Standard Pindex drill bur - 1/8 Id Chuck]
- All Metal construction
- Sealed Housing
PINDEX DRILLS : item # PX119, pack of 3 burs us$ 25.00 - see Special Burs
21/05/2010 / 1284
173
Pinsetters - Pindex
RENFERT-023-1835-4000 Top-Spin Drilling Machine 110
US$ 1,385.00
- The automatic laser pinhole drilling unit guarantees the highest drilling precision and enables a relaxed
working position either sitting or standing.
- Easy, resistance-free drilling with the extremely powerful motor at 16.000 rpm is guaranteed with even
super-hard plasters. The result: The diameter is smaller, offers a more precise fit and is significantly
straighter.
- Ergonomics supports precision workThe technician can comfortably hold the model in the desired
position and drill without wavering, especially as the drilling itself is not strenuous.
- With the aid of the precision laser guidance point, the technician can also determine the best position
for the basal drillhole.
AVAILABLE IN 110v AND 220v
Polishing and Finishing
Buffs - Muslin Chamois Flannel
BUFF DISC ( All Brands )
- Clean, finishing and shaping scratches
- While inducing a high lustrous polish on acrylic dental appliances
- Leather center
such as:
- Dentures
- Partial dentures
- Acrylic crowns
- Bridges
- Orthodontic appliances
Price
+
100028
Code
ECCO - Leather Center 4inch x 40Ply Rueda Lienzo Trapo BF124
Name
US$ 3.00
+Info
101777
ECCO - ECCO Muslin Buffs - 4inch x 40 Ply - 12pk - Leather Center ...
US$ 16.97
+Info
101776
ECCO - ECCO Muslin Buffs - 3inch x 30Ply - 12pk Leather center - ...
US$ 12.32
+Info
100191
ECCO - ECCO Muslin Buffs - White - 4in x 40Ply - 1pk Leather center ...
US$ 4.00
+Info
217106
CFS - CFS Rag Buff 3in x 40Ply - 10pk - Leather center ...
US$ 23.40
+Info
Flannels
KEYSTONE-034-1180065 Flannel Buff 3in x 20Ply
US$ 4.25
- Flannel Buffs - 3inch - 20 Ply - High quality flannel - virtually lint free -used w/ fine rouge to produce a final high
luster on gold or acrylic.
- May also be used as a wipe off wheel w/out composition - sold indiv - franela pulido
- Rueda Keystone Abrasives - Keystone Dental Tools - Us Dental Depot is specialized business in Dental lab
equipment & Dental Porcelain Furnaces
174
21/05/2010 / 1284
Flannels
KEYSTONE-034-1180075 Flannel Buff 4in x 20Ply
US$ 3.36
- Flannel Buffs - 4inch - 20 Ply - High quality flannel - virtually lint free -used w/ fine rouge to produce a final high
luster on gold or acrylic
- May also be used as a wipe off wheel w/out composition - sold indiv - franela pulido.
- Rueda [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized business in Dental lab
Polish Compounds & bars
KEYSTONE-034-1660100 Composite Polish 1Lb Bar
US$ 9.90
Composite Polish - 1lb bar- Polishing Compound - [K# 1660100 ] Produces a quick high shine on all plastic
restorations
KEYSTONE-034-1660040 White Diamond Compound 13oz.
US$ 4.78
White Diamond Compound - 13 oz. Bar - Polishing Compound [K# 1660040 ] Clean - Dry - Fast - pre-polish on
plastics
Porcelain Accesories
Firing Pegs
ECCO - 499-0001 Honey-Comb Met Pins 10pk
US$ 14.00
ECCO Metal Firing Pegs Honey-Comb Metal Pins for trays -10pk [K# 1680087 K# 1680085 )
ECCO - 404-0003 Uni-Peg Porc For Anterior 12pk
US$ 19.00
- Anterior - White - 12pk
- Perfect stability
- Close placement
- Ideal for all firing needs within laboratory
- Interlocking with absolute precision forexact positioning
- Can be fired up to 2200
ECCO - 100697 Uni-Peg Porc for Bicusp 10pk
US$ 16.00
- Anterior - Pink - 12pk
- Perfect stability
- Close placement
21/05/2010 / 1284
175
Firing Pegs
ECCO - 100527 Uni-Peg Porc for Molars 10pk
US$ 16.00
- Perfect stability
- Close placement
ECCO - 404-0004 Uni-Peg Porc Poterior 12pk
US$ 18.00
- Perfect stability
- Close placement
Firing Trays for Porcelain
ECCO - 101131 Flex Firing Trays 4pk
US$ 17.50
- High temperature refractory sheets - 4pk - 2 x 2 inches
- Doesnt over heat - Doesn't stick on the porcelain - good for alumina, zirconia and metal ceramic
- Naves tipo refractarias flexibles - No atrapa calor - no deja pelos - no se pega - buena para alumina y metal
ceramica.
ECCO - 404-0002 Honey-Comb Tray 2-7/8x 7/8in
US$ 17.00
ECCO Honey-Comb Round Tray 2-7/8 x 7/8in Thick [Nave porcelana]
ECCO - 101775 Honeycomb Firing Tray w 20pins
US$ 23.00
Honeycomb Firing Tray - set of 2 with 20 Ceramic pins - 3.125in [80mm] x .412 [10mm] - used as a platform to
fire crowns and bridges - 4 slots for easy handling in and out of furnace - metal pins are used for support -
KEYSTONE -034-5920110 Soft Pillow Round Spr 6pk
US$ 10.80
- 6pk - Soft tray for firing porcelain
- Almohadas refractaria almohadilla.
- Keystone Dental Tools.
ECCO - 101675 Wet Mixing Tray Large 24x16cm
US$ 55.00
- Includes tray and lid
- Higroscopic function -Volcanic rock - mantains wet the porcelain.
- Loseta Compacta Para La Mezcla De Porcelana ConFunci Higroscica.
- Efecto De La Humidificaci Es Idtico Al De La Loseta Tropical. ) TamanoGrande.
Liquids for Porcelain
176
21/05/2010 / 1284
LIQUIDS ( Ceratec )
- Modeling Liquid: a special liquid for use with dentine and incisal porcelains to enhance the building and modeling
of the ceramic as well as improving the density of the fired restoration.
- Stain and Glaze Medium: a special liquid to be used only for the mixing of glaze and stain powders.
- Shoulder SET: this liquid is used in the mixing of shoulder powders allowing the shoulder to harden on the die
facilitating removal without affecting unsupported porcelain.
- Shoulder SEP: a separating medium used over the stone model to prevent adherence of the porcelain to the
stone.
- Opaque Liquid: a special liquid to be used in the mixing of Opaque powders. When used, this liquid will provide an
opaque powder mix that is creamier and easier to apply the metal. Also used for moistening the brush for enhancing
the application of paste opaques porcelains.
Price
+
100004
Code
CERATEC - Ceratec Liquid 7.5ml
US$ 0.00
+Info
200073
CERATEC - Ceratec Stain & Glaze Liq 15ml
US$ 12.00
+Info
200070
CERATEC - Ceratec Paste Opaque Liq 15ml
US$ 12.00
+Info
200071
CERATEC - Ceratec Modeling Liquid 15ml
US$ 12.00
+Info
101983
CERATEC - Ceratec Liquids 15ml all types
US$ 12.00
+Info
102144
CERATEC - Ceratec HF Shlder Diluent 15ml
US$ 12.00
+Info
102185
CERATEC - Ceratec Opaque Liq 15ml
US$ 12.00
+Info
102182
CERATEC - Ceratec Shoulder Sep 15ml
US$ 12.00
+Info
102183
CERATEC - Ceratec Shoulder Set 15ml
US$ 12.00
+Info
101425
CERATEC - Ceratec Opaque Paste Liq 120ml
US$ 23.00
+Info
100058
CERATEC - Ceratec Opaque Liquid 120ml
US$ 23.00
+Info
200072
CERATEC - Ceratec Modeling Liquid 120ml
US$ 23.00
+Info
200074
CERATEC - Ceratec Stain &Glaze Liq 120ml
US$ 28.00
+Info
102033
CERATEC - Ceratec Shoulder Sep 120ml
US$ 42.00
+Info
102058
CERATEC - Ceratec Shoulder Set 120ml
US$ 42.00
+Info
RENFERT - Proform-12 Ceramic Add 60ml
US$ 39.45
+Info
023-1462-0000
Name
Plungers for pressable ceramic
PLUNGERS FOR PRESSABLE CERAMIC
- Ceramic Pressable Plungers
- Disposable
- For 2gr ingots
Price
+
100270
Code
ECCO - Ceramic Press Plunger 2gr 25pk
Name
US$ 24.00
+Info
100269
ECCO - Ceramic Press Plunger 2gr 50pk
US$ 33.00
+Info
Porcelain Trays
21/05/2010 / 1284
177
Porcelain Trays
KEYSTONE-034-1680010 Porcelain Stacking Tray Set/5
US$ 28.00
Porcelain Stacking Tray Set/5 Saucers & Lids
ECCO - 103794 Stain Pallet Tray 4.5x 3.5in
US$ 17.00
ECCO-Stain Pallet with 12 wells - 4-1/2x 3-1/2in - 11.5x 8cm - porcelain tray
ECCO - 103805 Stain Pallet Tray 9.5x7.5in
US$ 43.00
ECCO-Stain Pallet with 30 wells - 9-1/2x7-1/2in - 23.75x18.75cm - porcelain tray
Shade Guides
CERATEC - 404-CERAFORM CERATEC Vita 95 Shade Guide
US$ 75.00
CERAMIC CLASSICAL A1-D4 SHADE GUIDE
- VITA VMK 95 Compatible
VITA - 103964 Vita 95 Shade Guide Original
US$ 125.00
VITA Shade guide VITA VMK 95 - [ Guia De Colores Porcelana Vita Vmk 95 Classical Shade Guide
Wet Mixing trays
ECCO - 100599 Wet Mixing Tray Small 16x11cm
US$ 47.00
ECCO Wet Mixing Tray Small - 16x11cm [6.5 x 4.5in ] - includes tray and lid - Higroscopic function - Volcanic
rock - mantains wet the porcelain
Porcelains
Alglass alum copin
178
21/05/2010 / 1284
Porcelains
Alglass alum copin
ALUMINA COPINS ( Alglass )
Alumina sintered at 1700C is one of the most resistant materials known
nowadays. However, the high temperatuand thermal contraction inherent
to the process make the use of this pure material impracticable for dental
structur,making.
- Materials usually called glasses have low fusing point but, on the other
hand, have small mechanical resistance.
- The Infiltrated glass in a pre-sintered alumina matrix results in a
composite that fulfill the mechanical requirements and bicompatibility in
a "Metal-Free" technique for structures and coping making.
- Material and Chemical Engineers Researchers from Brazilian
Universities together with specialists in DenProsthesis and Celmat
developed a family of products that uses this technology, making this
idea available to tlmarket at low cost, high quality and reliability.
- The ALGLASS means alumina and together with GLASS adds it potential
to each other. It was still required to have equipments compatible withthe
Brazilian reality to enable the use of state-of-the-art technology by the
mostnumber of Dental prosthesis technicians.
Sinterization temperature : 1120 C
Infiltration Temperature : 1100 C
Can be built direct on the working model !!
Infiltration Glass is compatible with Inceram techniques
For more information visit www.usdentaldepot.com
ACCESSORIES LIQUID
Price
+
100713
Code
ALGLASS - ALGLASS Gel Alumina 40gr each + 1 corrector liquid ( Alglass liquid for alumin...
Name
US$ 120.00
+Info
200178
ALGLASS - ALGLASS 10ml bottle of dispersant liquid for Infiltration Glass - ( refill only ...
US$ 52.00
+Info
ALUMINIA REFILLS
Price
+
200175
Code
ALGLASS - ALGLASS Powder refill: 1x 38gr of Powder Alumina + 2 x 5ml corrector liquid ...
Name
US$ 120.00
+Info
101304
ALGLASS - ALGLASS bottle of 5 ml Corrector liquid for Powder Alumina preparation ...
US$ 26.00
+Info
COMPLETE KITS
Code
Name
Price
+
US$ 1,180.00
+Info
ALGLASS - ALGLASSSintered Alumina Short Kit - Alumina copins - 3 38gr alumina envelopes ...
US$ 850.00
+Info
ALGLASS - ALGLASS Gel Intro Kit Contains: 1Bottle 40gr Gel Alumina + 2 x 5ml corrector li...
US$ 280.00
+Info
200173
ALGLASS - ALGLASS Sintered Alumina Complete Kit- 380gr powder alumina +12bottles of 10ml l...
200174
100583
INFILTRATION GLASS REFILLS
Price
+
200176
Code
ALGLASS - ALGLASS Bottle - 25gr of glass - color V0 - Refill - [] #NOMBRE?
Name
US$ 160.00
+Info
200195
US$ 160.00
+Info
200196
US$ 160.00
+Info
Porcelains
Ceratec High Fusion
21/05/2010 / 1284
179
Porcelains
Ceratec High Fusion
ADD ON ( Ceratec )
- The Ceratec ADD ON is easy to use
- Necessary for make slight corrections after final firing procedures
- When placed in the contact area, they tend to harmonize chromatically with the adjacent porcelain.
- Provides compatibility with a broad range of alloy
- Available 7 Add On porcelain
Price
+
102010
Code
CERATEC - Ceratec LF Add On Opaq Lt 30gr
Name
US$ 22.00
+Info
102024
CERATEC - Ceratec LF Add On Opaq Dk 30gr
US$ 22.00
+Info
100289
CERATEC - Ceratec LF Add On Dent Lt 30gr
US$ 22.00
+Info
100287
CERATEC - Ceratec LF Add On Dent Med 30g
US$ 22.00
+Info
100288
CERATEC - Ceratec LF Add On Dent Dk 30gr
US$ 22.00
+Info
100290
CERATEC - Ceratec LF Add On Inc Lt 30gr
US$ 22.00
+Info
100291
CERATEC - Ceratec LF Add On Inc Cl 30gr
US$ 22.00
+Info
HF CHROMA DENTNE ( Ceratec )
- High Fusion porcelain, with fine grain powder
- Ceratec is easy to use for the beginner and expert ceramist with all of the properties and porcelains necessary for the best
art work.
- Designed to easily replicate the beauty and vitality of natural teeth.
- The extremely stable CTE provides compatibility with a broad range of alloys (14.0 - 14.8 at 500C
- Permits multiple firings while maintaining form and shade integrity.Achieve accurate shades right out of the bottle with only
the basic powders.
- Maintain shade, even at varied thicknesses becomes simple
COMPATIBLE with Ceramco 3- Noritake, C-mix . Can be mixed and fired toether
- Recommended alloy CERAKAST, also compatible with other common alloys on the market.
See Instructions and Videos online
Price
+
100319
Code
CERATEC - Ceratec HF Chroma A0 Pwd 30g
Name
US$ 14.50
+Info
100320
US$ 14.50
+Info
100321
US$ 14.50
+Info
100322
US$ 14.50
+Info
100323
CERATEC - Ceratec HF Chroma A3-5 Pwd 30g
US$ 14.50
+Info
100324
US$ 14.50
+Info
100325
CERATEC - Ceratec HF Chroma B0 Pwd 30g
US$ 14.50
+Info
100326
US$ 14.50
+Info
100327
US$ 14.50
+Info
100328
US$ 14.50
+Info
100329
US$ 14.50
+Info
100330
CERATEC - Ceratec HF Chroma C1 Pwd 30g
US$ 14.50
+Info
100331
US$ 14.50
+Info
100332
US$ 14.50
+Info
100333
US$ 14.50
+Info
100334
CERATEC - Ceratec HF Chroma D2 Pwd 30g
US$ 14.50
+Info
100335
US$ 14.50
+Info
100336
US$ 14.50
+Info
HF DENTINE ( Ceratec )
- High Fusion porcelain, with fine grain powder
- Ceratec is easy to use for the beginner and expert ceramist with all of the properties and porcelains necessary for the best
art work.
- Designed to easily replicate the beauty and vitality of natural teeth.
- The extremely stable CTE provides compatibility with a broad range of alloys (14.0 - 14.8 at 500C
180
21/05/2010 / 1284
Porcelains
Ceratec High Fusion
- Permits multiple firings while maintaining form and shade integrity.Achieve accurate shades right out of the bottle with only the basic powders.
- Maintain shade, even at varied thicknesses becomes simple
COMPATIBLE with Ceramco 3- Noritake, C-mix . Can be mixed and fired toether
- Recommended alloy CERAKAST, also compatible with other common alloys on the market.
See Instructions and Videos online
CERATEC HF DENTINE 30gr
Price
+
200085
Code
CERATEC - Ceratec HF Dentine A0 Pwd 30gr
Name
US$ 14.50
+Info
200050
US$ 14.50
+Info
200051
US$ 14.50
+Info
200052
US$ 14.50
+Info
200053
CERATEC - Ceratec HF Dentin A3.5 Pwd 30g
US$ 14.50
+Info
200054
US$ 14.50
+Info
100149
CERATEC - Ceratec HF Dentine B0 Pwd 30g
US$ 14.50
+Info
200055
CERATEC - Ceratec HF Dentine B1 Pwd 30gr
US$ 14.50
+Info
200056
US$ 14.50
+Info
200057
US$ 14.50
+Info
100007
US$ 14.50
+Info
200058
CERATEC - Ceratec HF Dentine C1 Pwd 30gr
US$ 14.50
+Info
200059
US$ 14.50
+Info
200060
US$ 14.50
+Info
200061
US$ 14.50
+Info
102482
CERATEC - Ceratec HF Dentine D1 Pwd 30gr
US$ 14.50
+Info
200062
US$ 14.50
+Info
200063
US$ 14.50
+Info
200064
US$ 14.50
+Info
HF DENTINE MODIFIERS ( Ceratec )
Price
+
102153
Code
CERATEC - Ceratec Dent Mod Blue 15gr
Name
US$ 9.00
+Info
102150
CERATEC - Ceratec Dent Mod Brown 15gr
US$ 9.00
+Info
102149
CERATEC - Ceratec Dent Mod Gray 15gr
US$ 9.00
+Info
102154
CERATEC - Ceratec Dent Mod Ocher 15gr
US$ 9.00
+Info
102148
CERATEC - Ceratec Dent Mod Orange 15gr
US$ 9.00
+Info
102151
CERATEC - Ceratec Dent Mod Pink 15gr
US$ 9.00
+Info
102152
CERATEC - Ceratec Dent Mod Violet 15gr
US$ 9.00
+Info
102146
CERATEC - Ceratec Dent Mod White 15gr
US$ 9.00
+Info
102147
CERATEC - Ceratec Dent Mod Yellow 15gr
US$ 9.00
+Info
HF ENAMEL ( Ceratec )
Enamel or Incisal
Enamel are slightly less translucent than Incisals ( more opaceous ). So, for that technicians that are used to build the
porcelain covering their dentine powder, with a complete layer of Incisals powder, then the one to be used by them should
be INCISALS.
In the other hand , the technician is used to place Enamel powder just on the first third of the crown. Then the proper
powder to be used should be ENAMELS.
In the case, you are using ENAMELS, and you see your fired porcelain, appearing a little bit lacking of color or slightly
turned to grey, is not because of the color of the porcleain.
It is just the Enamel layer, that went too high over the second and third thrird of the preparation/ crown / dentine powder.
21/05/2010 / 1284
181
Porcelains
Ceratec High Fusion
Buttom line, more translucent is the Incisal powder , more opaceous is the Enamel powder .
For people that uses less Enamel, then the powder is Enamel.
For people that covers the crown with Incisal, then the powder is Incisal.
CERATEC HF ENAMEL 30gr
Price
+
100068
Code
CERATEC - Ceratec HF Enamel E1Pwd 30g
Name
US$ 14.50
+Info
100069
CERATEC - Ceratec HF Enamel E2 Pwd 30g
US$ 14.50
+Info
100070
US$ 14.50
+Info
100071
US$ 14.50
+Info
HF GINGIVALS ( Ceratec )
Price
+
100869
Code
CERATEC - Ceratec Gingivals Bottle 30g
Name
US$ 14.50
+Info
100868
CERATEC - Ceratec Gingivals Bottle 30g
US$ 14.50
+Info
HF INCISAL ( Ceratec )
Enamel or Incisal
Enamel are slightly less translucent than Incisals ( more opaceous ).
So, for that technicians that are used to build the porcelain covering their dentine powder, with a complete layer of Incisals
powder, then the one to be used by them should be INCISALS. In the other hand , the technician is used to place Enamel
powder just on the first third of the crown. Then the proper powder to be used should be ENAMELS.
turned to grey, is not because of the color of the porcleain. It is just the Enamel layer, that went too high over the second
and third thrird of the preparation/ crown / dentine powder. Buttom line, more translucent is the Incisal powder , more
opaceous is the Enamel powder .
CERATEC HF COLOR INCISAL 15gr
Price
+
100538
Code
CERATEC - Ceratec HF Incisal Blue 15g
Name
US$ 9.00
+Info
102002
CERATEC - Ceratec HF Incisal Pink 15g
US$ 9.00
+Info
102184
CERATEC - Ceratec HF Incisal Violet 15g
US$ 9.00
+Info
102143
CERATEC - Ceratec HF Incisal White 15g
US$ 9.00
+Info
102001
CERATEC - Ceratec HF Incisal Yellow 15g
US$ 9.00
+Info
CERATEC HF COLOR INCISAL 30gr
Price
+
102297
Code
CERATEC - Ceratec HF Incisal White 30g
Name
US$ 14.50
+Info
102298
CERATEC - Ceratec HF Incisal Violet 30g
US$ 14.50
+Info
102299
CERATEC - Ceratec HF Incisal Yellow 30g
US$ 14.50
+Info
Price
+
CERATEC HF OPAL INCISAL 30gr
Code
182
Name
21/05/2010 / 1284
Porcelains
Ceratec High Fusion
100443
CERATEC - Ceratec HF Opal Incisal I1 30g
US$ 14.50
+Info
100444
US$ 14.50
+Info
100445
US$ 14.50
+Info
100446
US$ 14.50
+Info
INCISAL POWDER 30 gr
Price
+
100056
Code
CERATEC - Ceratec HF Incisal I1 Pwd 30g
Name
US$ 14.50
+Info
100057
US$ 14.50
+Info
200065
US$ 14.50
+Info
200066
US$ 14.50
+Info
200067
US$ 14.50
+Info
100150
US$ 14.50
+Info
HF OPACEOUS DENTINE ( Ceratec )
Price
+
101996
Code
CERATEC - Ceratec HF Opacious Den A0 30g
Name
US$ 14.50
+Info
200034
US$ 14.50
+Info
200035
US$ 14.50
+Info
200036
US$ 14.50
+Info
200037
CERATEC - Ceratec HF Opacious Den A3.5
US$ 14.50
+Info
200038
US$ 14.50
+Info
102000
CERATEC - Ceratec HF Opacious Den B0 30g
US$ 14.50
+Info
200039
US$ 14.50
+Info
200040
US$ 14.50
+Info
200041
US$ 14.50
+Info
200042
US$ 14.50
+Info
200043
CERATEC - Ceratec HF Opacious Den C1 30g
US$ 14.50
+Info
200044
US$ 14.50
+Info
200045
US$ 14.50
+Info
200046
US$ 14.50
+Info
200047
CERATEC - Ceratec HF Opacious Den D2 30g
US$ 14.50
+Info
200048
US$ 14.50
+Info
200049
US$ 14.50
+Info
HF OPAQUE MODIFIERS ( Ceratec )
Price
+
102102
Code
CERATEC - Ceratec Opaque Mod Brown 15gr
US$ 9.00
+Info
102083
CERATEC - Ceratec Opaque Mod Gray 15gr
US$ 9.00
+Info
102117
CERATEC - Ceratec Opaque Mod Ocher 15gr
US$ 9.00
+Info
102079
CERATEC - Ceratec Opaque Mod Orange 15gr
US$ 9.00
+Info
102116
CERATEC - Ceratec Opaque Mod Pink 15gr
US$ 9.00
+Info
102077
CERATEC - Ceratec Opaque Mod White 15gr
US$ 9.00
+Info
21/05/2010 / 1284
Name
183
Porcelains
Ceratec High Fusion
102078
CERATEC - Ceratec Opaque Mod Yellow 15gr
US$ 9.00
+Info
HF POWDER OPAQUE ( Ceratec )
Price
+
102314
Code
CERATEC - Ceratec HF Mask Pwd Opaque 30g
Name
US$ 14.50
+Info
200084
CERATEC - Ceratec HF Opaque A0 Pwd 30gr
US$ 14.50
+Info
200001
CERATEC - Ceratec HF Opaque A1 Pwd 30g
US$ 14.50
+Info
200002
US$ 14.50
+Info
200003
US$ 14.50
+Info
100014
CERATEC - Ceratec HF Opaque A3.5 Pwd 30g
US$ 14.50
+Info
200004
US$ 14.50
+Info
101993
CERATEC - Ceratec HF Opaque B0 Pwd 30g
US$ 14.50
+Info
200005
US$ 14.50
+Info
200006
US$ 14.50
+Info
200007
CERATEC - Ceratec HF Opaque B3 Pwg 30g
US$ 14.50
+Info
200008
US$ 14.50
+Info
200009
CERATEC - Ceratec HF Opaque C1 Pwd 30g
US$ 14.50
+Info
200010
CERATEC - Ceratec HF Opaque C2 Pwg 30g
US$ 14.50
+Info
200011
US$ 14.50
+Info
200012
US$ 14.50
+Info
200013
CERATEC - Ceratec HF Opaque D1 Pwd 30g
US$ 14.50
+Info
200014
CERATEC - Ceratec HF Opaque D2 Pwd 30gr
US$ 14.50
+Info
200015
US$ 14.50
+Info
200016
US$ 14.50
+Info
HF SHOULDER ( Ceratec )
Price
+
101994
Code
CERATEC - Ceratec HF Shoulder Bleach 15g
Name
US$ 22.00
+Info
100338
CERATEC - Ceratec HF Shlouder Med Lt 15g
US$ 22.00
+Info
100337
CERATEC - Ceratec HF Shoulder Lt 15g
US$ 22.00
+Info
100339
CERATEC - Ceratec HF Shoulder Med Md 15g
US$ 22.00
+Info
101995
CERATEC - Ceratec HF Shoulder Med 15g
US$ 22.00
+Info
100340
CERATEC - Ceratec HF Shoulder Med Dk 15g
US$ 22.00
+Info
100341
CERATEC - Ceratec HF Shoulder Dark 15g
US$ 22.00
+Info
HF-LF TRASLUCENT & GLAZE ( Ceratec )
Code
200068
184
Name
CERATEC - Ceratec HF Translucent IT 30gr
Price
+
US$ 14.50
+Info
21/05/2010 / 1284
Porcelains
Ceratec High Fusion
102300
CERATEC - Ceratec HF Glaze Temp 30g
US$ 26.00
+Info
200069
CERATEC - Ceratec LF Low Glaze Temp 30g
US$ 26.00
+Info
102215
CERATEC - Ceratec LF Low Glaze 15gr
US$ 9.00
+Info
Porcelains
Ceratec Ingots
INGOTS PRESS PORCELAIN ( Ceratec )
The needs of dental laboratories to decrease productiontime while maintaining natural esthetics and accurate fithave
led to the development of this new material enablingthe technician to produce restorations meeting thesecriteria. Our
press to metal ceramic tablets offer both tothe specialist and the beginner a product capable ofreplicating the look
and beauty of natural teeth bithquickly and accurately.
Price
+
200126
Code
CERATEC - Ceratec LF Dentine A0 Ingot 5p
Name
US$ 28.00
+Info
200127
CERATEC - Ceratec LF Dentine A1 Ing 5pk
US$ 28.00
+Info
200128
US$ 28.00
+Info
200129
US$ 28.00
+Info
200130
CERATEC - Ceratec LF Dentine A3.5 Ing 5p
US$ 28.00
+Info
200131
US$ 28.00
+Info
200147
CERATEC - Ceratec LF Dentine B0 Ing 5pk
US$ 28.00
+Info
200132
US$ 28.00
+Info
200133
US$ 28.00
+Info
200134
US$ 28.00
+Info
200135
US$ 28.00
+Info
200136
CERATEC - Ceratec LF Dentine C1 Ing 5pk
US$ 28.00
+Info
200137
US$ 28.00
+Info
200138
US$ 28.00
+Info
200139
US$ 28.00
+Info
200140
CERATEC - Ceratec LF Dentine D2 Ing 5pk
US$ 28.00
+Info
200141
US$ 28.00
+Info
200142
US$ 28.00
+Info
200143
CERATEC - Ceratec LF Enamel E1 Ing 5pk
US$ 28.00
+Info
200144
US$ 28.00
+Info
200145
US$ 28.00
+Info
200146
US$ 28.00
+Info
Porcelains
Ceratec Kits
PORCELAIN KITS ( Ceratec )
Ceratec is easy to use for the ceramist with little experience but has all of the properties and porcelains necessary for the
expert ceramist. Designed with one goal in mine: to easily replicate the beauty and vitality of natural teeth. The extremely
stable CTE provides compatibility with a broad range of alloys (14.0 - 14.8 at 500C) and permits multiple firings while
maintaining form and shade integrity. Achieve accurate shades right out of the bottle with only the basic powders. Ceratec
is offered in A1-D4 shades in addition to A0 & B0 bleached shades. Maintaining shade even at varied thicknesses
becomes simple with the choice of Opacious Dentine, Chroma Dentine and Dentine
Price
+
100079
Code
CERATEC - Ceratec HF Dentine Kit 30g
US$ 199.00
+Info
100080
CERATEC - Ceratec HF Opaque Kit 30g
US$ 199.00
+Info
21/05/2010 / 1284
Name
185
Porcelains
Ceratec Kits
100081
CERATEC - Ceratec HF Palette Paste Kt 5g
US$ 199.00
+Info
100082
CERATEC - Ceratec HF Dentine Mod Kit 15g
US$ 103.00
+Info
100083
CERATEC - Ceratec HF Opaque Mod Kit 30g
US$ 91.00
+Info
100084
CERATEC - Ceratec HF Palette Mod Kit 15g
US$ 85.00
+Info
100085
CERATEC - Ceratec HF Incisal/Enam Kt 30g
US$ 157.00
+Info
100086
CERATEC - Ceratec HF Incis Color Kt 15g
US$ 150.00
+Info
100087
CERATEC - Ceratec HF Shoulder Kit 15g
US$ 89.00
+Info
100088
CERATEC - Ceratec HF Opacious Den Kt 30g
US$ 199.00
+Info
100089
CERATEC - Ceratec HF Chroma Den Kit 30g
US$ 199.00
+Info
100090
CERATEC - Ceratec HF Stain Kit 5g
US$ 175.00
+Info
100091
CERATEC - Ceratec HF Add-On Kit 30g
US$ 89.00
+Info
100563
CERATEC - Ceratec HF Incisal Kit
US$ 97.00
+Info
100564
CERATEC - Ceratec HF Enamel Kit
US$ 81.00
+Info
100902
CERATEC - Ceratec HF Basic Kt 60 bottles
US$ 818.00
+Info
100942
CERATEC - Ceratec HF Student Kit 2 10pk
US$ 43.00
+Info
100944
CERATEC - Ceratec HF Student Kit 1 5pk
US$ 19.00
+Info
101665
CERATEC - Ceratec HF Introduction Kit
US$ 43.00
+Info
102160
CERATEC - Ceratec HF Basic Kit 15gr
US$ 620.00
+Info
Porcelains
Ceratec Low Fusion
LF ADD ON DENTINE ( Ceratec )
Price
+
102220
Code
CERATEC - Ceratec LF Add On Inc Lt 15gr
Name
US$ 12.00
+Info
102219
CERATEC - Ceratec LF Add On Inc Cl 15gr
US$ 12.00
+Info
102217
CERATEC - Ceratec LF Add On Dent Med 15g
US$ 12.00
+Info
102216
CERATEC - Ceratec LF Add On Dent Lt 15gr
US$ 12.00
+Info
102218
CERATEC - Ceratec LF Add On Dent Dk 15gr
US$ 12.00
+Info
LF DENTINE ( Ceratec )
Code
186
Price
+
100076
CERATEC - Ceratec LF Dentine A0 Pwd 30g
Name
US$ 22.00
+Info
100092
US$ 22.00
+Info
100093
US$ 22.00
+Info
100094
US$ 22.00
+Info
100095
CERATEC - Ceratec LF Dentine A3.5 Pwd 30
US$ 22.00
+Info
100096
US$ 22.00
+Info
100097
CERATEC - Ceratec LF Dentine B1 Pwd 30g
US$ 22.00
+Info
100098
US$ 22.00
+Info
100099
US$ 22.00
+Info
100100
US$ 22.00
+Info
21/05/2010 / 1284
Porcelains
Ceratec Low Fusion
100101
CERATEC - Ceratec LF Dentine C1 Pwd 30g
US$ 22.00
+Info
100102
US$ 22.00
+Info
100103
US$ 22.00
+Info
100104
US$ 22.00
+Info
100105
CERATEC - Ceratec LF Dentine D2 Pwd 30g
US$ 22.00
+Info
100106
US$ 22.00
+Info
100107
US$ 22.00
+Info
LF INCISALS ( Ceratec )
Enamel or Incisal
Enamel are slightly less translucent than Incisals ( more opaceous ).
So, for that technicians that are used to build the porcelain covering their dentine powder, with a complete layer of Incisals
powder, then the one to be used by them should be INCISALS.
In the other hand , the technician is used to place Enamel powder just on the first third of the crown. Then the proper
powder to be used should be ENAMELS.
turned to grey, is not because of the color of the porcleain.
It is just the Enamel layer, that went too high over the second and third thrird of the preparation/ crown / dentine powder.
Buttom line, more translucent is the Incisal powder , more opaceous is the Enamel powder .
Price
+
100113
Code
CERATEC - Ceratec Incisal I1 LF Pwd 30g
Name
US$ 30.00
+Info
100114
US$ 30.00
+Info
100115
US$ 30.00
+Info
100116
US$ 30.00
+Info
100117
US$ 30.00
+Info
100118
CERATEC - Ceratec Incisal IT LF Pwd 30g
US$ 30.00
+Info
Porcelains
Ceratec Stains
STAINS LF & HF ( Ceratec )
Ceratec is easy to use for the ceramist with little experience but has all of the properties and porcelains necessary for the
expert ceramist.
Ceratec Stains can used with LOW FUSION and HIGH FUSION
Maintaining shade even at varied thicknesses becomes simple with the choice of Opacious Dentine, Chroma Dentine and
Dentine
Price
+
100391
Code
CERATEC - Ceratec Stains Blue 5grs
US$ 17.00
+Info
100393
CERATEC - Ceratec Stains Brown 5grs
US$ 17.00
+Info
102005
CERATEC - Ceratec Stains Gray 5grs
US$ 17.00
+Info
100395
CERATEC - Ceratec Stains Ocher 5grs
US$ 17.00
+Info
101261
CERATEC - Ceratec Stains Orange 5grs
US$ 17.00
+Info
102007
CERATEC - Ceratec Stains Pink 5grs
US$ 17.00
+Info
100392
CERATEC - Ceratec Stains Violet 5grs
US$ 17.00
+Info
100394
CERATEC - Ceratec Stains White 5grs
US$ 17.00
+Info
101916
CERATEC - Ceratec Stains Yellow 5grs
US$ 17.00
+Info
21/05/2010 / 1284
Name
187
Porcelains
Elite 'One Build' Porcelain
Porcelains
"ONE BUILD" PORCELAIN ( Elite )
Elite One Build by Vision USA
This new porcelain system is based on a single powder build-up whereby the dentine and incisal are pre-mixed in a
special proportion in order to be able to achieve all the Vita shades including AO and BO with just 11 premixed
bottles.
Type: High Fusion
Grain : Medium grain porcelain, same as Solera porcelain.
Cte (Coheficcient Thermal expansion) between 13 ? 15.2
Alloys : which warranties full usability with the most used ceramic alloys in the market, containing Berilium or Berilium
free as well. Some of the compatible alloys : Rexilium 3 , Ecco, Cerakast, Super-1, Super 3, Cerakast-2,
ExactoBond & ExactoBond-2, Wiron 99, just to mention some of them.
Benefits : to this kit are increased production, minimizing porcelain inventory and enhanced esthetics by eliminating
the demarcation line between body and incisal. Simply follow the firing instructions enclosed and select the proper
bottle for your specific shade requirement. The ease of technique and accurate shade matching will become
apparent with your first case.
Principle : Based on a strong chroma on the opque and a high translucent body mass.
Mixing Powders with other brands : Yes, as the CTE has a wide range, there is no indications against using other
brand powders, either to add to the mass, or the correct after baking. Which is not warranted is the color resulting of
the mix. |
Corrections : Corrections can be made either with the same Elite powders like any other porcelain, or with Vision
Low, ( same as used for Vision Press ) .Also corrections can be made with ANY other porcelain.
Available Powder and Colors : Dentine/Incisals : 11 bottles Paste Opaques : A0 to D4 Clear ( High translucency )
For any technical querstyion , call free to : 1 305 826 0007 Mr/ Sr Nary ( English/Spanish)
DENTIN BODY ( Elite )
Price
+
105211
Code
ELITE - Elite -One Build- Dentine Body Kit [ Porcelain ]
Name
US$ 593.18
+Info
105203
ELITE - Elite -One Build- A0 Dentine Body 50gr [ Porcelain ]
US$ 51.87
+Info
103864
ELITE - Elite -One Build- A1-A2 Dentine Body 50gr [ Porcelain ]
US$ 51.87
+Info
105201
ELITE - Elite -One Build- A3-A3.5Dentine Body 50gr [ Porcelain ]
US$ 51.87
+Info
105202
ELITE - Elite -One Build- A4-C4 Dentine Body 50gr [ Porcelain ]
US$ 51.87
+Info
105204
ELITE - Elite -One Build- B0 Dentine Body 50gr [ Porcelain ]
US$ 51.87
+Info
103865
ELITE - Elite -One Build- B1-B2 Dentine Body 50gr [ Porcelain ]
US$ 51.87
+Info
105205
ELITE - Elite -One Build- B3 Dentine Body 50gr [ Porcelain ]
US$ 51.87
+Info
105206
ELITE - Elite -One Build- B4-D4 Dentine Body 50gr [ Porcelain ]
US$ 51.87
+Info
105207
ELITE - Elite -One Build- C1 Dentine Body 50gr [ Porcelain ]
US$ 51.87
+Info
105208
ELITE - Elite -One Build- C3 Dentine Body 50gr [ Porcelain ]
US$ 51.87
+Info
105210
ELITE - Elite -One Build- D2-3 Dentine Body 50gr [ Porcelain ]
US$ 51.87
+Info
PASTE OPAQUE (Elite)
Code
188
Price
+
105230
ELITE - Elite -One Build- 3gr Jar Paste Opaque Kit [ Porcelain ]
Name
US$ 409.50
+Info
105231
ELITE - Elite -One Build- Opaque White [ Porcelain ]
US$ 16.35
+Info
105212
ELITE - Elite -One Build- 3gr Jar Paste Opaque A0 [ Porcelain ]
US$ 16.34
+Info
105213
US$ 16.34
+Info
105214
US$ 16.34
+Info
105215
US$ 16.34
+Info
105216
ELITE - Elite -One Build- 3gr Jar Paste Opaque A3.5 [ Porcelain ]
US$ 16.34
+Info
105217
US$ 16.34
+Info
21/05/2010 / 1284
Porcelains
105222
ELITE - Elite -One Build- 3gr Jar Paste Opaque Bo [ Porcelain ]
US$ 16.34
+Info
105218
ELITE - Elite -One Build- 3gr Jar Paste Opaque B1 [ Porcelain ]
US$ 16.34
+Info
105219
US$ 16.34
+Info
105220
US$ 16.16
+Info
105221
US$ 16.34
+Info
105223
ELITE - Elite -One Build- 3gr Jar Paste Opaque C1 [ Porcelain ]
US$ 16.34
+Info
105224
US$ 16.34
+Info
105225
US$ 16.34
+Info
105226
US$ 16.34
+Info
105227
ELITE - Elite -One Build- 3gr Jar Paste Opaque D2 [ Porcelain ]
US$ 16.34
+Info
105228
US$ 16.34
+Info
105229
US$ 16.34
+Info
TRANSLUCENT (Elite)
Code
105209
Name
ELITE - Elite -One Build- Clear [ Porcelain ]
Price
+
US$ 51.87
+Info
Porcelains
Eshtetic Porcleain
PORCELAIN ( Esthetic )
- Vision Esthetic dual low fusing ceramic.
- For both pressable and PFM restorations.
- CTE range 15,9 -16,7 ( 25 - 500 C)
- Vision Esthetic also offers a selection of 54 pressable
ingots for build up and staining techniques, with opacities
ranging from 25% to 85%.
DENTINE 20 gr.
Price
+
105457
Code
ESTHETIC - Esthetic Dentine Body A1 20gr [ Porcelain ]
US$ 38.81
+Info
105460
US$ 38.81
+Info
105463
US$ 38.81
+Info
105466
ESTHETIC - Esthetic Dentine Body A3.5 20gr [ Porcelain ]
US$ 38.81
+Info
105469
US$ 38.81
+Info
105472
ESTHETIC - Esthetic Dentine Body B1 20gr [ Porcelain ]
US$ 38.81
+Info
105475
US$ 38.81
+Info
105478
US$ 38.81
+Info
105481
US$ 38.81
+Info
105484
ESTHETIC - Esthetic Dentine Body C1 20gr [ Porcelain ]
US$ 38.81
+Info
105487
US$ 38.81
+Info
21/05/2010 / 1284
Name
189
Porcelains
Eshtetic Porcleain
105490
US$ 38.81
+Info
105493
US$ 38.81
+Info
105496
ESTHETIC - Esthetic Dentine Body D2 20gr [ Porcelain ]
US$ 38.81
+Info
105499
US$ 38.81
+Info
105502
US$ 38.81
+Info
GLAZE
Code
Name
Price
+
US$ 52.15
+Info
ESTHETIC - Esthetic Glaze 40Gr
US$ 96.01
+Info
ESTHETIC - Esthetic Glaze 500G
US$ 796.71
+Info
105509
ESTHETIC - Esthetic Glaze Liq 10ml
US$ 11.79
+Info
105510
ESTHETIC - Esthetic Glaze Liq 25ml
US$ 20.89
+Info
105694
ESTHETIC - Esthetic Stain Glaze 3gr
US$ 23.84
+Info
105506
ESTHETIC - Esthetic Glaze 20gr
105507
105508
INCISAL
Price
+
105511
Code
ESTHETIC - Esthetic Inc #57 20gr
Name
US$ 38.81
+Info
105514
US$ 38.81
+Info
105517
US$ 38.81
+Info
105520
US$ 38.81
+Info
105523
ESTHETIC - Esthetic Inc SuperClear 20gr
US$ 52.23
+Info
105526
ESTHETIC - Esthetic Inc Trans Blau 20gr
US$ 38.81
+Info
105529
ESTHETIC - Esthetic Inc Trans Clear 20gr
US$ 38.81
+Info
105532
ESTHETIC - Esthetic Inc Trans Grey 20gr
US$ 38.81
+Info
105533
ESTHETIC - Esthetic Inc Trans Neut 20gr
US$ 38.81
+Info
105535
ESTHETIC - Esthetic Inc Trans Opal 20gr
US$ 59.11
+Info
105538
ESTHETIC - Esthetic Inc Trans Red 20gr
US$ 40.63
+Info
105539
ESTHETIC - Esthetic Inc Trans Weiss 20gr
US$ 40.63
+Info
INGOT
Code
190
Price
+
105542
ESTHETIC - Esthetic Ingots 01
Name
US$ 67.84
+Info
105543
ESTHETIC - Esthetic Ingots 02
US$ 67.84
+Info
105544
ESTHETIC - Esthetic Ingots A1
US$ 67.84
+Info
105545
US$ 67.84
+Info
105546
US$ 67.84
+Info
105547
ESTHETIC - Esthetic Ingots A3.5
US$ 67.84
+Info
105548
US$ 67.84
+Info
105549
ESTHETIC - Esthetic Ingots B1
US$ 67.84
+Info
105550
US$ 67.84
+Info
105551
US$ 67.84
+Info
105552
US$ 67.84
+Info
105553
ESTHETIC - Esthetic Ingots C1
US$ 67.84
+Info
105554
US$ 67.84
+Info
105555
US$ 67.84
+Info
105556
US$ 67.84
+Info
105557
ESTHETIC - Esthetic Ingots Ct
US$ 67.84
+Info
105558
ESTHETIC - Esthetic Ingots Ct1
US$ 67.84
+Info
105559
US$ 67.84
+Info
105560
US$ 67.84
+Info
105561
US$ 67.84
+Info
105562
ESTHETIC - Esthetic Ingots D2
US$ 67.84
+Info
21/05/2010 / 1284
Porcelains
Eshtetic Porcleain
105563
US$ 67.84
+Info
105564
US$ 67.84
+Info
105565
ESTHETIC - Esthetic Ingots Ea0
US$ 70.98
+Info
105566
US$ 70.98
+Info
105567
US$ 70.98
+Info
105568
ESTHETIC - Esthetic Ingots Eb0
US$ 70.98
+Info
105569
ESTHETIC - Esthetic Ingots Eb00
US$ 70.98
+Info
105570
ESTHETIC - Esthetic Ingots Op1
US$ 70.98
+Info
105571
US$ 70.98
+Info
105572
US$ 70.98
+Info
105573
US$ 70.98
+Info
105574
US$ 70.98
+Info
105575
ESTHETIC - Esthetic Ingots T1
US$ 67.84
+Info
105576
ESTHETIC - Esthetic Ingots T2
US$ 67.84
+Info
105577
ESTHETIC - Esthetic Ingots Wa0
US$ 70.98
+Info
105578
US$ 70.98
+Info
105579
US$ 70.98
+Info
105580
US$ 70.98
+Info
105581
US$ 70.98
+Info
105582
ESTHETIC - Esthetic Ingots Wa3.5
US$ 70.98
+Info
105583
US$ 70.98
+Info
105584
ESTHETIC - Esthetic Ingots Wb0
US$ 70.98
+Info
105585
US$ 70.98
+Info
105586
US$ 70.98
+Info
105587
US$ 70.98
+Info
105588
US$ 70.98
+Info
105589
US$ 70.98
+Info
105590
ESTHETIC - Esthetic Ingots Wc1
US$ 70.98
+Info
105591
US$ 70.98
+Info
105592
US$ 70.98
+Info
105593
US$ 70.98
+Info
105594
ESTHETIC - Esthetic Ingots Wd2
US$ 70.98
+Info
105595
US$ 70.98
+Info
105596
US$ 70.98
+Info
105597
ESTHETIC - Esthetic Ingots Wt1
US$ 70.98
+Info
105598
ESTHETIC - Esthetic Ingots Wt2
US$ 70.98
+Info
105678
ESTHETIC - Esthetic Shade Guide/Ingots
US$ 290.33
+Info
INTENSIVE
Price
+
105599
Code
ESTHETIC - Esthetic Int Dent. Mod Ba 20gr
Name
US$ 40.87
+Info
105600
ESTHETIC - Esthetic Int Dent. Mod Bb 20gr
US$ 40.87
+Info
105601
ESTHETIC - Esthetic Int Dent. Mod Bc 20gr
US$ 40.87
+Info
105602
ESTHETIC - Esthetic Int Dent. Mod Bd 20gr
US$ 40.87
+Info
105603
ESTHETIC - Esthetic Int Dent. Mod Blue 20
US$ 40.87
+Info
105604
ESTHETIC - Esthetic Int Dent. Mod Brown 2
US$ 40.87
+Info
105605
ESTHETIC - Esthetic Int Dent. Mod Honyel2
US$ 40.87
+Info
105606
ESTHETIC - Esthetic Int Dent. Mod Straw 2
US$ 40.87
+Info
105607
ESTHETIC - Esthetic Int Dent. Mod Weiss 2
US$ 40.63
+Info
105675
ESTHETIC - Esthetic Sh Gd Int Den #1(S5)
US$ 43.90
+Info
105676
ESTHETIC - Esthetic Sh Gd Int Dent. #2(S5
US$ 43.90
+Info
Price
+
KIT
Code
21/05/2010 / 1284
Name
191
Porcelains
Eshtetic Porcleain
105667
ESTHETIC - Esthetic S Gd Trans C-O-N-W-B(
US$ 37.27
+Info
105668
ESTHETIC - Esthetic S1 Opaque Kit
US$ 414.33
+Info
105669
ESTHETIC - Esthetic S2 Kit
US$ 599.79
+Info
105670
US$ 393.85
+Info
105671
US$ 599.79
+Info
105672
US$ 379.33
+Info
105673
US$ 193.10
+Info
MODELLING LIQUID
Price
+
105608
Code
ESTHETIC - Esthetic Modelling Liq 250Ml
Name
US$ 42.55
+Info
105609
ESTHETIC - Esthetic Modelling Liq 50ml
US$ 12.19
+Info
105610
US$ 4.51
+Info
105611
US$ 9.32
+Info
OPAC DENTIN 20 gr.
Price
+
105614
Code
ESTHETIC - Esthetic Opaciuos Dent. A1 20g
Name
US$ 38.81
+Info
105616
US$ 38.81
+Info
105618
US$ 38.81
+Info
105620
ESTHETIC - Esthetic Opaciuos Dent. A3.5 2
US$ 38.81
+Info
105622
US$ 38.81
+Info
105624
ESTHETIC - Esthetic Opaciuos Dent. B1 20g
US$ 38.81
+Info
105626
US$ 38.81
+Info
105628
US$ 38.81
+Info
105630
US$ 38.81
+Info
105632
ESTHETIC - Esthetic Opaciuos Dent. C1 20g
US$ 38.81
+Info
105634
US$ 38.81
+Info
105636
US$ 38.81
+Info
105638
US$ 38.81
+Info
105640
ESTHETIC - Esthetic Opaciuos Dent. D2 20g
US$ 38.81
+Info
105642
US$ 38.81
+Info
105644
US$ 38.81
+Info
OPAQUE PASTE
Code
192
Price
+
105646
ESTHETIC - Esthetic Opaque Liq 10ml
Name
US$ 5.42
+Info
105647
ESTHETIC - Esthetic Opaque Paste A1
US$ 22.79
+Info
105648
US$ 22.79
+Info
105649
US$ 22.79
+Info
105650
ESTHETIC - Esthetic Opaque Paste A3.5
US$ 22.79
+Info
105651
US$ 22.79
+Info
105652
ESTHETIC - Esthetic Opaque Paste B1
US$ 22.79
+Info
105653
US$ 22.79
+Info
105654
US$ 22.79
+Info
105655
US$ 22.79
+Info
105656
ESTHETIC - Esthetic Opaque Paste Braun 4G
US$ 22.79
+Info
105657
ESTHETIC - Esthetic Opaque Paste C1
US$ 22.79
+Info
105658
US$ 22.79
+Info
105659
US$ 22.79
+Info
105660
US$ 22.79
+Info
105661
ESTHETIC - Esthetic Opaque Paste D2
US$ 22.79
+Info
105662
US$ 22.79
+Info
21/05/2010 / 1284
Porcelains
Eshtetic Porcleain
105663
US$ 22.79
+Info
105664
ESTHETIC - Esthetic Opaque Paste Orange
US$ 22.79
+Info
105665
ESTHETIC - Esthetic Opaque Paste Violet
US$ 22.79
+Info
105666
ESTHETIC - Esthetic Opaque Paste Weiss
US$ 22.79
+Info
OTHER
Price
+
105505
Code
ESTHETIC - Esthetic Effect Pwd Rose 20
Name
US$ 38.81
+Info
105612
ESTHETIC - Esthetic Neon 20gr
US$ 70.98
+Info
SHOULDER
Code
Name
Price
+
US$ 30.58
+Info
ESTHETIC - Esthetic Sh Gd Shld (S6)
US$ 30.58
+Info
ESTHETIC - Esthetic Shd Gd Comp Set
US$ 142.37
+Info
105680
ESTHETIC - Esthetic Shld Ba 20gr
US$ 49.73
+Info
105681
ESTHETIC - Esthetic Shld Bb 20gr
US$ 49.73
+Info
105682
ESTHETIC - Esthetic Shld Bc 20gr
US$ 49.73
+Info
105683
ESTHETIC - Esthetic Shld Bd 20gr
US$ 49.73
+Info
105684
ESTHETIC - Esthetic Shld Liq 25ml
US$ 18.42
+Info
105685
ESTHETIC - Esthetic Shld Neutral 20gr
US$ 49.73
+Info
105674
ESTHETIC - Esthetic Sh Gd 57-58-59-60(S3)
105677
105679
STAIN
Price
+
105686
Code
ESTHETIC - Esthetic Stain Ba 3gr
Name
US$ 23.84
+Info
105687
ESTHETIC - Esthetic Stain Bb 3gr
US$ 23.84
+Info
105688
ESTHETIC - Esthetic Stain Bc 3gr
US$ 23.84
+Info
105689
ESTHETIC - Esthetic Stain Bd 3gr
US$ 23.84
+Info
105690
ESTHETIC - Esthetic Stain Blau Flour 3gr
US$ 23.84
+Info
105691
ESTHETIC - Esthetic Stain Braun Flour 3gr
US$ 23.84
+Info
105692
ESTHETIC - Esthetic Stain D-Braun Flor 3g
US$ 23.84
+Info
105693
ESTHETIC - Esthetic Stain Gelb Flour 3gr
US$ 23.84
+Info
105695
ESTHETIC - Esthetic Stain Kit L/F
US$ 273.46
+Info
105696
ESTHETIC - Esthetic Stain Orange Flour 3g
US$ 23.84
+Info
105697
ESTHETIC - Esthetic Stain Schwarz Flor 3g
US$ 23.84
+Info
105698
ESTHETIC - Esthetic Stain Weiss Flour 3gr
US$ 23.84
+Info
TEST
Price
+
105699
Code
ESTHETIC - Esthetic Test S
Name
US$ 207.52
+Info
105700
ESTHETIC - Esthetic Test Set M
US$ 154.34
+Info
105701
ESTHETIC - Esthetic Test Set Mini with Me
US$ 329.97
+Info
Porcelains
Solera Porcelain
21/05/2010 / 1284
193
Porcelains
Solera Porcelain
PORCELAIN ( Solera )
A German Fine Grain High Fusion Porcelain
Compatible in termperature and CTGE with Ceramco 3,
Ceratec and Synspar
CTE between 13 - 15.2 what makes DSolera compatible with
most alloys in the market
Just to mention some of the most used alloys, Solera can be
fired over : Super-1 Super-3, Cerakast, Exacto alloys,
Rexilium 3 , Wiron 99, PFM Chrome cobalts, and can also be
baked on alloys with up to 50% of Silver.
Translucency value for Dentin Body , is close to 55% . Being
slightly more opaque than Ceramco 3 and Ceratec, makes it
easier to cover thin areas or areas of difficult coverage, with
no need of using Opaceous Dentine.
Test kist are also available
CHROMA DENTIN (Solera)
Price
+
105232
Code
SOLERA - Solera Chroma Dent. A 1oz
Name
US$ 17.84
+Info
105234
SOLERA - Solera Chroma Dent. B 1oz
US$ 17.84
+Info
105236
SOLERA - Solera Chroma Dent. C 1oz
US$ 17.84
+Info
105238
SOLERA - Solera Chroma Dent. D 1oz
US$ 17.84
+Info
105240
SOLERA - Solera Chroma Dent. Kit 1oz
US$ 88.00
+Info
DENTINE 1 Oz. (Solera)
Price
+
105241
Code
SOLERA - Solera Dent. A1 - 1oz
Name
US$ 17.84
+Info
105243
US$ 17.84
+Info
105245
US$ 17.84
+Info
105247
SOLERA - Solera Dent. A3.5 - 1oz
US$ 17.84
+Info
105249
US$ 17.84
+Info
105251
SOLERA - Solera Dent. B1 - 1oz
US$ 17.84
+Info
105253
US$ 17.84
+Info
105255
US$ 17.84
+Info
105257
US$ 17.84
+Info
105259
SOLERA - Solera Dent. C1 - 1oz
US$ 17.84
+Info
105261
US$ 17.84
+Info
105263
US$ 17.84
+Info
105265
US$ 17.84
+Info
105267
SOLERA - Solera Dent. D2 - 1oz
US$ 17.84
+Info
105269
US$ 17.84
+Info
105271
US$ 17.84
+Info
GLAZE (Solera)
Code
105274
194
Name
SOLERA - Solera Glaze 1oz
Price
+
US$ 22.02
+Info
21/05/2010 / 1284
Porcelains
Solera Porcelain
105276
SOLERA - Solera Glaze Liq 25 Ml
US$ 13.51
+Info
105277
SOLERA - Solera Glaze Liq 50 Ml
US$ 21.07
+Info
105278
SOLERA - Solera Glaze Liq 250Ml
US$ 105.48
+Info
INCISAL (Solera)
Price
+
105279
Code
SOLERA - Solera Inc 67 1oz
Name
US$ 17.84
+Info
105281
US$ 17.84
+Info
105283
US$ 17.84
+Info
105285
US$ 17.84
+Info
105287
SOLERA - Solera Inc/Tr Kit 10Z
US$ 293.71
+Info
105288
SOLERA - Solera Inc/Tr Shade Guide
US$ 86.86
+Info
KIT (Solera)
Code
Name
Price
+
US$ 301.76
+Info
SOLERA - Solera Mast Kit Pwd/Stain
US$ 1,710.39
+Info
SOLERA - Solera Mast Kit with Stain Pst
US$ 1,775.00
+Info
105291
SOLERA - Solera Master Kit Paste Opaque
US$ 1,481.66
+Info
105334
SOLERA - Solera Paste Opaque Kit
US$ 368.55
+Info
105394
SOLERA - Solera Shld Kit 1oz
US$ 127.44
+Info
105430
SOLERA - Solera Test Kit A2
US$ 32.54
+Info
105431
SOLERA - Solera Test Kit A3
US$ 32.54
+Info
105432
SOLERA - Solera Test Kit A2 with Paste
US$ 52.28
+Info
105433
SOLERA - Solera Test Kit A3 with Paste
US$ 52.28
+Info
105273
SOLERA - Solera Dentine Kit 1oz
105289
105290
MODELLING LIQUID (Solera)
Price
+
105293
Code
SOLERA - Solera Model Liq 25 Ml
Name
US$ 8.37
+Info
105294
SOLERA - Solera Model Liq 50 Ml
US$ 12.70
+Info
105295
SOLERA - Solera Model Liq 250Ml
US$ 28.35
+Info
NEON (Solera)
Code
105296
Name
SOLERA - Solera Neon 1oz
Price
+
US$ 22.02
+Info
OPAC DENTINE (Solera)
Price
+
105333
Code
SOLERA - Solera Opac Dent. Kit 1oz.
US$ 301.76
+Info
105298
SOLERA - Solera Opac Dent. A1 - 1oz
US$ 17.84
+Info
105300
US$ 17.84
+Info
105302
US$ 17.84
+Info
105304
SOLERA - Solera Opac Dent. A3.5 - 1oz
US$ 17.84
+Info
105306
US$ 17.84
+Info
105308
SOLERA - Solera Opac Dent. B1 - 1oz
US$ 17.84
+Info
105310
US$ 17.84
+Info
105312
US$ 17.84
+Info
105314
US$ 17.84
+Info
105316
SOLERA - Solera Opac Dent. C1 - 1oz
US$ 17.84
+Info
105318
US$ 17.84
+Info
105320
US$ 17.84
+Info
21/05/2010 / 1284
Name
195
Porcelains
Solera Porcelain
105322
US$ 17.84
+Info
105324
SOLERA - Solera Opac Dent. D2 - 1oz
US$ 17.84
+Info
105326
US$ 17.84
+Info
105328
US$ 17.84
+Info
105330
SOLERA - Solera Op Liq 25 Ml
US$ 9.69
+Info
105332
SOLERA - Solera Op Liq 50 Ml
US$ 12.11
+Info
105331
SOLERA - Solera Op Liq 250Ml
US$ 32.44
+Info
PASTE OPAQUE (Solera)
Price
+
105336
Code
SOLERA - Solera Pst Op 3gr. A1
Name
US$ 16.34
+Info
105337
US$ 16.34
+Info
105338
US$ 16.34
+Info
105339
SOLERA - Solera Pst Op 3gr. A3.5
US$ 16.34
+Info
105340
US$ 16.34
+Info
105341
SOLERA - Solera Pst Op 3gr. B1
US$ 16.34
+Info
105342
US$ 16.34
+Info
105343
US$ 16.34
+Info
105344
US$ 16.34
+Info
105345
SOLERA - Solera Pst Op 3gr. C1
US$ 16.34
+Info
105346
US$ 16.34
+Info
105347
US$ 16.34
+Info
105348
US$ 16.34
+Info
105349
SOLERA - Solera Pst Op 3gr. D2
US$ 16.34
+Info
105350
US$ 16.34
+Info
105351
US$ 16.34
+Info
POWDER OPAQUE (Solera)
Price
+
105335
Code
SOLERA - Solera Pwd Opaque Kit 1oz
Name
US$ 304.40
+Info
105352
SOLERA - Solera Pwd Opaque A1 - 1oz
US$ 17.84
+Info
105354
US$ 17.84
+Info
105356
SOLERA - Solera Pwd Opaque A2 Kilo
US$ 341.61
+Info
105357
US$ 17.84
+Info
105359
SOLERA - Solera Pwd Opaque A3 Kilo
US$ 341.61
+Info
105360
SOLERA - Solera Pwd Opaque A3.5 - 1oz
US$ 17.84
+Info
105362
US$ 17.84
+Info
105364
SOLERA - Solera Pwd Opaque B1 - 1oz
US$ 17.84
+Info
105366
US$ 17.84
+Info
105368
US$ 17.84
+Info
105370
US$ 17.84
+Info
105372
SOLERA - Solera Pwd Opaque C1 - 1oz
US$ 17.84
+Info
105374
US$ 17.84
+Info
105376
US$ 17.84
+Info
105378
US$ 17.84
+Info
105380
SOLERA - Solera Pwd Opaque D2 - 1oz
US$ 17.84
+Info
105382
US$ 17.84
+Info
105384
US$ 17.84
+Info
105292
SOLERA - Solera Master Kit Powder Opaq.
US$ 1,417.01
+Info
SHOULDER (Solera)
Code
105386
196
Name
SOLERA - Solera Shld A 1oz
Price
+
US$ 22.02
+Info
21/05/2010 / 1284
Porcelains
Solera Porcelain
105388
SOLERA - Solera Shld B 1oz
US$ 22.02
+Info
105390
SOLERA - Solera Shld C 1oz
US$ 22.02
+Info
105392
SOLERA - Solera Shld D 1oz
US$ 22.02
+Info
105395
SOLERA - Solera Shld Liq 25 Ml
US$ 8.69
+Info
105396
SOLERA - Solera Shld Liq 50 Ml
US$ 13.43
+Info
105398
SOLERA - Solera Shld Neutral 10Z.
US$ 22.02
+Info
SPRAY (Solera)
Price
+
105399
Code
SOLERA - Solera Spray A1
Name
US$ 36.32
+Info
105400
US$ 36.32
+Info
105401
SOLERA - Solera Spray A2 10 gr
US$ 17.88
+Info
105402
US$ 36.32
+Info
105403
SOLERA - Solera Spray A3 10 Garm
US$ 16.24
+Info
105404
SOLERA - Solera Spray A3.5
US$ 36.32
+Info
105405
SOLERA - Solera Spray A3.5 10 gr
US$ 17.88
+Info
105406
US$ 36.32
+Info
105407
SOLERA - Solera Spray B1
US$ 36.32
+Info
105408
SOLERA - Solera Spray B1 10 gr
US$ 17.88
+Info
105409
US$ 36.32
+Info
105410
SOLERA - Solera Spray B2 10 gr
US$ 17.88
+Info
105411
US$ 36.32
+Info
105412
US$ 36.32
+Info
105413
SOLERA - Solera Spray Base
US$ 36.32
+Info
105414
SOLERA - Solera Spray C1
US$ 36.32
+Info
105415
US$ 36.32
+Info
105416
US$ 36.32
+Info
105417
US$ 36.32
+Info
105418
SOLERA - Solera Spray D2
US$ 36.32
+Info
105419
SOLERA - Solera Spray D2 10 gr
US$ 17.88
+Info
105420
US$ 36.32
+Info
105421
US$ 36.32
+Info
105422
SOLERA - Solera Spray Glaze
US$ 54.56
+Info
105423
SOLERA - Solera Spray Kit
US$ 548.55
+Info
105424
SOLERA - Solera Spray Neon 10G
US$ 28.03
+Info
105425
SOLERA - Solera Spray Station
US$ 359.37
+Info
TRANSLUCENT (Solera)
Price
+
105439
Code
SOLERA - Solera Trans Clear 1oz
US$ 17.84
+Info
105441
SOLERA - Solera Trans Grey 1oz
US$ 17.84
+Info
105443
SOLERA - Solera Trans Light Blue 1oz
US$ 17.84
+Info
105445
SOLERA - Solera Trans Neutral 1oz
US$ 17.84
+Info
105447
SOLERA - Solera Trans Opal 1oz
US$ 17.84
+Info
105449
SOLERA - Solera Trans Red 1oz
US$ 17.84
+Info
105451
SOLERA - Solera Trans Super Clear 1oz
US$ 17.84
+Info
105453
SOLERA - Solera Trans White 1oz
US$ 17.84
+Info
105455
SOLERA - Solera Trans Yellow 1oz
US$ 17.84
+Info
21/05/2010 / 1284
Name
197
Porcelains
Vision Classic
Porcelains
Vision Classic
CLASSIC PORCELAIN ( Vision )
Introduced at the 1995 IDS in Cologne, Germany,Vision Classic has established itself as an easy touse
ceramic with consistant shade accuracy.
As a clinically proven ceramic.
- Compatible with alloys having a CTE 15.2?m/mK (25 - 600°C)
perfectly compatible with mayor used alloys like Super-1 - Rex 3 - Verabond etc
- Non greening
- V shades A1 - D4
- No slumping during build up
- Less shrinkage during firing
ASSORTMENT (Vision Classic)
Price
+
105879
Code
VISION CLASSIC - Vision Ass. S1 with Shade Guid
Name
US$ 398.76
+Info
105880
VISION CLASSIC - Vision Ass. S2 Dent. with Tabs
US$ 399.13
+Info
105881
VISION CLASSIC - Vision Ass. S3 Incis&Trw/Tab
US$ 393.85
+Info
105883
US$ 399.13
+Info
105884
US$ 377.83
+Info
105885
US$ 276.74
+Info
105886
US$ 303.35
+Info
105887
US$ 125.80
+Info
DENTINE (Vision Classic)
DENTINE 20 Gr.
Code
198
Price
+
105889
VISION CLASSIC - Vision Dent. A1 20gr
Name
US$ 20.16
+Info
105892
US$ 20.16
+Info
105895
US$ 20.16
+Info
105898
VISION CLASSIC - Vision Dent. A3.5 20gr
US$ 20.16
+Info
105901
US$ 20.16
+Info
105904
VISION CLASSIC - Vision Dent. B1 20gr
US$ 20.16
+Info
105907
US$ 20.16
+Info
105910
US$ 20.16
+Info
105913
US$ 20.16
+Info
105916
VISION CLASSIC - Vision Dent. Ba 20gr
US$ 20.16
+Info
105917
VISION CLASSIC - Vision Dent. Bb 20gr
US$ 20.16
+Info
105918
VISION CLASSIC - Vision Dent. Bc 20gr
US$ 20.16
+Info
105919
VISION CLASSIC - Vision Dent. Bd 20gr
US$ 20.16
+Info
105920
VISION CLASSIC - Vision Dent. C1 20gr
US$ 20.16
+Info
105923
US$ 20.16
+Info
21/05/2010 / 1284
Porcelains
Vision Classic
105926
US$ 20.16
+Info
105929
US$ 20.16
+Info
105932
VISION CLASSIC - Vision Dent. D2 20gr
US$ 20.16
+Info
105935
US$ 20.16
+Info
105938
US$ 20.16
+Info
105956
VISION CLASSIC - Vision Hlwd A0 Dent. 20gr
US$ 20.16
+Info
105968
VISION CLASSIC - Vision Hlwd Bo Dent. 20gr
US$ 20.16
+Info
EFFECT POWDER (Vision Classic)
Price
+
105943
Code
VISION CLASSIC - Vision Effect Pwd Ivory 20gr
Name
US$ 25.52
+Info
105944
VISION CLASSIC - Vision Effect Pwd Khaki 20gr
US$ 25.52
+Info
105945
VISION CLASSIC - Vision Effect Pwd Straw 20gr
US$ 25.52
+Info
105946
VISION CLASSIC - Vision Effect Pwd Yellow Brown
US$ 25.52
+Info
105947
VISION CLASSIC - Vision Effect Pwd Hg 20gr
US$ 25.52
+Info
HOLLYWOOD (Vision Classic)
Price
+
105962
Code
VISION CLASSIC - Vision Hlwd Abo Inc 20gr
Name
US$ 20.16
+Info
105965
VISION CLASSIC - Vision Hlwd Abo Opaque 20gr
US$ 20.16
+Info
INCISAL (Vision Classic)
INCISAL 20 Gr.
Price
+
105866
Code
VISION CLASSIC - Vision Artistic Inc 67 20gr
Name
US$ 20.16
+Info
105869
US$ 20.16
+Info
105872
US$ 20.16
+Info
105875
US$ 20.16
+Info
105974
VISION CLASSIC - Vision Inc 57 20gr
US$ 20.16
+Info
105977
US$ 20.16
+Info
105980
US$ 20.16
+Info
105983
US$ 20.16
+Info
106021
VISION CLASSIC - Vision Int Inc 07 20gr
US$ 24.98
+Info
106024
US$ 24.98
+Info
106027
US$ 24.98
+Info
106030
US$ 24.98
+Info
INCISAL 250 Gr.
Price
+
105868
Code
VISION CLASSIC - Vision Artistic Inc 67 250
Name
US$ 198.79
+Info
105871
US$ 198.79
+Info
105874
US$ 198.79
+Info
105877
US$ 198.79
+Info
Price
+
INTENSIVE (Vision Classic)
DENTINE
Code
21/05/2010 / 1284
Name
199
Porcelains
Vision Classic
106007
VISION CLASSIC - Vision Int Dent. Blue 20gr
US$ 24.98
+Info
106009
VISION CLASSIC - Vision Int Dent. Brown 20gr
US$ 24.98
+Info
106011
VISION CLASSIC - Vision Int Dent. Grey 20gr
US$ 24.98
+Info
106013
VISION CLASSIC - Vision Int Dent. Hny-Yw 20gr
US$ 24.98
+Info
106015
VISION CLASSIC - Vision Int Dent. Ivory 20gr
US$ 24.98
+Info
106017
VISION CLASSIC - Vision Int Dent. Neon 20gr
US$ 23.39
+Info
106019
VISION CLASSIC - Vision Int Dent. Straw 20gr
US$ 24.98
+Info
OPAQUE
Price
+
106033
Code
VISION CLASSIC - Vision Int Opaque Brown 20gr
Name
US$ 25.52
+Info
106034
VISION CLASSIC - Vision Int Opaque Ocher 20gr
US$ 25.52
+Info
106035
VISION CLASSIC - Vision Int Opaque Orange 20gr
US$ 25.52
+Info
106037
VISION CLASSIC - Vision Int Opaque Violet 20gr
US$ 25.52
+Info
106039
VISION CLASSIC - Vision Int Opaque White 20gr
US$ 25.52
+Info
106040
VISION CLASSIC - Vision Int Opaque Yellow 20gr
US$ 25.52
+Info
KIT (Vision Classic)
Price
+
105878
Code
VISION CLASSIC - ASSORTMENT S1 KIT - Content: - 16 Opaque Powders (A1 to D4 20g) - 2 Opaque liqui...
Name
US$ 382.20
+Info
106196
VISION CLASSIC - STAIN ASSORTMENT KIT - Content: 01-02-03-04-05-06-07-08-09-10-11-12-13-14-15-Gla...
US$ 287.38
+Info
106200
VISION CLASSIC - TEST KIT No 1 - Content: 0-A3 20g- OD-A3 20g- D-A3 20g- 1-59 20g- TR-Clear.- 1 M...
US$ 85.09
+Info
106218
VISION CLASSIC - VIS-OPAKASSORTMENT KIT - Content: 16 Paste opaque A1 -D4 4g- White 4g- Other 4g-...
US$ 435.99
+Info
LIQUID (Vision Classic)
Price
+
105941
Code
VISION CLASSIC - Vision Effect Liq 25ml
Name
US$ 10.56
+Info
105942
VISION CLASSIC - Vision Effect Liq 50ml
US$ 11.10
+Info
105951
VISION CLASSIC - Vision Glaze Liq 25ml
US$ 15.88
+Info
105952
VISION CLASSIC - Vision Glaze Liq 50ml
US$ 24.98
+Info
105953
VISION CLASSIC - Vision Glaze Liq 250Ml
US$ 108.25
+Info
106041
VISION CLASSIC - Vision Model Liq 250 Ml
US$ 38.81
+Info
106042
VISION CLASSIC - Vision Model Liq 25ml
US$ 8.01
+Info
106043
VISION CLASSIC - Vision Model Liq 50ml
US$ 12.78
+Info
106080
VISION CLASSIC - Vision Opaque Liq 250Ml
US$ 44.69
+Info
106081
VISION CLASSIC - Vision Opaque Liq 25ml
US$ 11.47
+Info
106082
VISION CLASSIC - Vision Opaque Liq 50ml
US$ 18.06
+Info
106107
VISION CLASSIC - Vision Opaque Liq 920*
US$ 6.33
+Info
106167
VISION CLASSIC - Vision Shoul Liq 25ml
US$ 8.01
+Info
106168
VISION CLASSIC - Vision Shoul Liq 50ml
US$ 12.38
+Info
OPACIOUS DENTINE (Vision Classic)
OPACIOUS DENTINE 20 Gr.
Code
105959
200
Name
VISION CLASSIC - Vision Hlwd A0 Opac Dent. 20gr
Price
+
US$ 20.16
+Info
21/05/2010 / 1284
Porcelains
Vision Classic
105971
VISION CLASSIC - Vision Hlwd Bo Opac Dent. 20gr
US$ 20.16
+Info
106044
VISION CLASSIC - Vision Opac Dent. A1 20gr
US$ 20.16
+Info
106046
US$ 20.16
+Info
106048
US$ 20.16
+Info
106050
VISION CLASSIC - Vision Opac Dent. A3.5 20gr
US$ 20.16
+Info
106052
US$ 20.16
+Info
106054
VISION CLASSIC - Vision Opac Dent. B1 20gr
US$ 20.16
+Info
106056
US$ 20.16
+Info
106058
US$ 20.16
+Info
106060
US$ 20.16
+Info
106062
VISION CLASSIC - Vision Opac Dent. Ba 20gr
US$ 20.16
+Info
106063
VISION CLASSIC - Vision Opac Dent. Bb 20gr
US$ 20.16
+Info
106064
VISION CLASSIC - Vision Opac Dent. Bc 20gr
US$ 20.16
+Info
106065
VISION CLASSIC - Vision Opac Dent. Bd 20gr
US$ 20.16
+Info
106066
VISION CLASSIC - Vision Opac Dent. C1 20gr
US$ 20.16
+Info
106068
US$ 20.16
+Info
106070
US$ 20.16
+Info
106072
US$ 20.16
+Info
106074
VISION CLASSIC - Vision Opac Dent. D2 20gr
US$ 20.16
+Info
106076
US$ 20.16
+Info
106078
US$ 20.16
+Info
OTHER (Vision Classic)
Code
Name
Price
+
US$ 41.17
+Info
VISION CLASSIC - Vision Enamelite Opaque A3.5
US$ 0.32
+Info
VISION CLASSIC - Vision Gingiva Pwd Dk Pnk 20gr
US$ 23.94
+Info
105950
VISION CLASSIC - Vision Gingiva Pwd Sft Pnk 20g
US$ 23.94
+Info
105954
VISION CLASSIC - Vision Glaze Pwd 20gr
US$ 23.39
+Info
105955
VISION CLASSIC - Vision Glaze Pwd 40G
US$ 39.31
+Info
106156
VISION CLASSIC - Vision Separator Pen
US$ 23.39
+Info
106201
VISION CLASSIC - Vision Test Set with Paste Opa
US$ 101.01
+Info
106222
VISION CLASSIC - Vision Vis-O-Bond
US$ 100.51
+Info
105888
VISION CLASSIC - Vision Ceramic Crocodile
105948
105949
PASTE OP. SYRINGE (Vision Classic)
Price
+
106083
Code
VISION CLASSIC - Vision Paste Opak -Syringe A1
US$ 23.39
+Info
106084
US$ 23.39
+Info
106085
US$ 23.39
+Info
106086
VISION CLASSIC - Vision Paste Opak -Syringe A3.
US$ 23.39
+Info
106087
US$ 23.39
+Info
106088
VISION CLASSIC - Vision Paste Opak -Syringe B1
US$ 23.39
+Info
106089
US$ 23.39
+Info
106090
US$ 23.39
+Info
106091
US$ 23.39
+Info
106092
VISION CLASSIC - Vision Paste Opak -Syringe C1
US$ 23.39
+Info
106093
US$ 23.39
+Info
21/05/2010 / 1284
Name
201
Porcelains
Vision Classic
106094
US$ 23.39
+Info
106095
US$ 23.39
+Info
106096
VISION CLASSIC - Vision Paste Opak -Syringe D2
US$ 23.39
+Info
106097
US$ 23.39
+Info
106098
US$ 23.39
+Info
106099
VISION CLASSIC - Vision Paste Opak -Syringe Lil
US$ 23.39
+Info
106100
VISION CLASSIC - Vision Paste Opak -Syringe Och
US$ 23.39
+Info
106101
VISION CLASSIC - Vision Paste Opak -Syringe Pin
US$ 23.39
+Info
106102
VISION CLASSIC - Vision Paste Opak -Syringe Whi
US$ 23.39
+Info
PASTE OPAQUE (Vision Classic)
Price
+
106202
Code
VISION CLASSIC - Vision Vis-Opak A1 920*
Name
US$ 24.43
+Info
106203
US$ 24.43
+Info
106204
US$ 24.43
+Info
106205
VISION CLASSIC - Vision Vis-Opak A3.5 920*
US$ 24.43
+Info
106206
US$ 24.43
+Info
106207
VISION CLASSIC - Vision Vis-Opak B1 920*
US$ 24.43
+Info
106208
US$ 24.43
+Info
106209
US$ 24.43
+Info
106210
US$ 24.43
+Info
106211
VISION CLASSIC - Vision Vis-Opak C1 920*
US$ 24.43
+Info
106212
US$ 24.43
+Info
106213
US$ 24.43
+Info
106214
US$ 24.43
+Info
106215
VISION CLASSIC - Vision Vis-Opak D2 920*
US$ 24.43
+Info
106216
US$ 24.43
+Info
106217
US$ 24.43
+Info
106219
VISION CLASSIC - Vision Vis-Opak Och 920*
US$ 24.43
+Info
106220
VISION CLASSIC - Vision Vis-Opak Vio 920*
US$ 24.43
+Info
106221
VISION CLASSIC - Vision Vis-Opak Wht 920*
US$ 24.43
+Info
POWDER OPAQUE (Vision Classic)
POWDER OPAQUE 20 Gr.
Code
202
Price
+
106103
VISION CLASSIC - Vision Opaque Ba 20gr
Name
US$ 20.16
+Info
106104
VISION CLASSIC - Vision Opaque Bb 20gr
US$ 20.16
+Info
106105
VISION CLASSIC - Vision Opaque Bc 20gr
US$ 20.16
+Info
106106
VISION CLASSIC - Vision Opaque Bd 20gr
US$ 20.16
+Info
106108
VISION CLASSIC - Vision Opaque Pwd A1 20gr
US$ 20.16
+Info
106111
US$ 20.16
+Info
106114
US$ 20.16
+Info
106117
VISION CLASSIC - Vision Opaque Pwd A3.5 20gr
US$ 20.16
+Info
106120
US$ 20.16
+Info
106123
VISION CLASSIC - Vision Opaque Pwd B1 20gr
US$ 20.16
+Info
106126
US$ 20.16
+Info
106129
US$ 20.16
+Info
106132
US$ 20.16
+Info
106135
VISION CLASSIC - Vision Opaque Pwd C1 20gr
US$ 20.16
+Info
106138
US$ 20.16
+Info
106141
US$ 20.16
+Info
106144
US$ 20.16
+Info
106147
VISION CLASSIC - Vision Opaque Pwd D2 20gr
US$ 20.16
+Info
21/05/2010 / 1284
Porcelains
Vision Classic
106150
US$ 20.16
+Info
106153
US$ 20.16
+Info
SHADES (Vision Classic)
Price
+
106157
Code
VISION CLASSIC - Vision Shade In&Is Int&Tr S3
Name
US$ 41.50
+Info
106158
VISION CLASSIC - Vision Shade Io Int Opaque S5
US$ 32.98
+Info
106159
VISION CLASSIC - Vision Shade Guide Id Zfl Ging
US$ 20.38
+Info
106160
VISION CLASSIC - Vision Shade Guide Opaque
US$ 36.13
+Info
106161
VISION CLASSIC - Vision Shade Guide S7 Set
US$ 79.67
+Info
106163
VISION CLASSIC - Vision Shade Guide Ult Lt(S8)
US$ 31.99
+Info
106164
VISION CLASSIC - Vision Shade Tab Complete
US$ 509.33
+Info
106165
VISION CLASSIC - Vision Shade Tab Dent. S2
US$ 82.95
+Info
106166
VISION CLASSIC - Vision Shade Tab Od Opac Dent.
US$ 82.95
+Info
SHOULDER ( Vision Classic)
Price
+
106162
Code
VISION CLASSIC - Vision Shade Guide Shld
Name
US$ 34.58
+Info
106169
VISION CLASSIC - Vision Shld Basic Ba 20gr
US$ 23.62
+Info
106170
VISION CLASSIC - Vision Shld Basic Bb 20gr
US$ 23.62
+Info
106171
VISION CLASSIC - Vision Shld Basic Bc 20gr
US$ 23.62
+Info
106172
VISION CLASSIC - Vision Shld Basic Bd 20gr
US$ 23.62
+Info
106173
VISION CLASSIC - Vision Shld Basic Neutral
US$ 23.62
+Info
106174
VISION CLASSIC - Vision Shld Brown 20gr
US$ 25.52
+Info
106175
VISION CLASSIC - Vision Shld Brown/Grey 20gr
US$ 25.52
+Info
106176
VISION CLASSIC - Vision Shld Ivory 20gr
US$ 25.52
+Info
106177
VISION CLASSIC - Vision Shld Straw 20gr
US$ 25.52
+Info
106178
VISION CLASSIC - Vision Shld Yell/Gold 20gr
US$ 25.52
+Info
106179
VISION CLASSIC - Vision Shld Yell/Grey 20gr
US$ 25.52
+Info
STAIN (Vision Classic)
Price
+
106180
Code
VISION CLASSIC - Vision Stain #01
Name
US$ 21.25
+Info
106181
US$ 21.25
+Info
106182
US$ 21.25
+Info
106183
US$ 21.25
+Info
106184
US$ 21.25
+Info
106185
US$ 21.25
+Info
106186
US$ 21.25
+Info
106187
US$ 21.25
+Info
106188
US$ 21.25
+Info
106189
US$ 20.24
+Info
106190
US$ 21.25
+Info
106191
US$ 21.25
+Info
106192
US$ 21.25
+Info
106193
US$ 21.25
+Info
106194
US$ 21.25
+Info
106195
VISION CLASSIC - Vision Stain Gl 3gr
US$ 21.25
+Info
106197
VISION CLASSIC - Vision Stain Liq 25ml
US$ 16.34
+Info
106198
VISION CLASSIC - Vision Stain Liq 50ml
US$ 24.71
+Info
106199
VISION CLASSIC - Vision Stain Violet 3gr
US$ 21.25
+Info
TRANSLUCENT (Vision Classic)
21/05/2010 / 1284
203
Porcelains
Vision Classic
TRANSLUCENT 20 Gr.
Price
+
105986
Code
VISION CLASSIC - Vision Inc Trans Blue 20gr
Name
US$ 24.98
+Info
105989
VISION CLASSIC - Vision Inc Trans Clear 20gr
US$ 20.16
+Info
105992
VISION CLASSIC - Vision Inc Trans Grey 20gr
US$ 24.98
+Info
105995
VISION CLASSIC - Vision Inc Trans Neutral 20gr
US$ 24.98
+Info
105998
VISION CLASSIC - Vision Inc Trans Opal 20gr
US$ 34.08
+Info
106001
VISION CLASSIC - Vision Inc Trans Red 20gr
US$ 24.98
+Info
106004
VISION CLASSIC - Vision Inc Trans Super Clear 2
US$ 24.98
+Info
TRANSLUCENT 250 Gr.
Code
105994
Name
VISION CLASSIC - Vision Inc Trans Grey 250
Price
+
US$ 265.86
+Info
Porcelains
Vision Low
LOW PORCELAIN ( Vision )
Dual low fusion Porcelain for
- Pressable ceramics
- Inlay-Onlay
- Venners
- Press over metal (PFM) Cte 13.8-14.9 (25c-500c)
Vickers Hardnes 470
Easy handling, no slumping during build up.
Vita shade reproduction and natural fluorescence.
- Opaque
- Shoulders
- Opacious Dentine
- Dentine
- Gingival
- Incesals & Enamels
- Translucents
- Glaze
- Stains
- Kits
- Liquids
DENTINE BODY V-LOW
Code
204
Price
+
105711
VISION LOW - Vision Low Dentine Body Bleach 1 20gr [ Porcelain ]
Name
US$ 29.40
+Info
105712
US$ 29.40
+Info
105713
US$ 29.40
+Info
105702
VISION LOW - Vision Low Dentine Body A1 20gr [ Porcelain ]
US$ 29.40
+Info
105703
US$ 29.40
+Info
105704
US$ 29.40
+Info
105705
VISION LOW - Vision Low Dentine Body A3.5 20gr [ Porcelain ]
US$ 29.40
+Info
105706
US$ 29.40
+Info
105707
VISION LOW - Vision Low Dentine Body B1 20gr [ Porcelain ]
US$ 29.40
+Info
21/05/2010 / 1284
Porcelains
Vision Low
105708
US$ 29.40
+Info
105709
US$ 29.40
+Info
105710
US$ 29.40
+Info
105714
VISION LOW - Vision Low Dentine Body C1 20gr [ Porcelain ]
US$ 29.40
+Info
105715
US$ 29.40
+Info
105716
US$ 29.40
+Info
105717
US$ 29.40
+Info
105718
VISION LOW - Vision Low Dentine Body D2 20gr [ Porcelain ]
US$ 29.40
+Info
105719
US$ 29.40
+Info
105720
US$ 29.40
+Info
GINGIVAL V-LOW
Code
105721
Name
VISION LOW - Vision Low Gingival Pink 20gr
Price
+
US$ 29.40
+Info
GLAZE V-LOW
Price
+
105724
Code
VISION LOW - Vision Low Glaze 10G
Name
US$ 15.69
+Info
105725
VISION LOW - Vision Low Glaze 20gr
US$ 29.40
+Info
INCISALS V-LOW
Price
+
105728
Code
VISION LOW - Vision Low Inc #57 20gr
Name
US$ 29.40
+Info
105729
US$ 29.40
+Info
105730
US$ 29.40
+Info
105731
US$ 29.40
+Info
105732
VISION LOW - Vision Low Inc Bleach 20gr
US$ 29.40
+Info
105726
VISION LOW - Vision Low Inc White 20gr
US$ 29.40
+Info
105727
VISION LOW - Vision Low Inc Yellow 20gr
US$ 29.40
+Info
KITS V-LOW
Price
+
105831
Code
VISION LOW - ASSORTMENT S1 KIT - Content: - 16 Opaque powder (A1 to D4) of 20g - 2 Opaque liq...
Name
US$ 469.11
+Info
105832
VISION LOW - ASSORTMENT S2 KIT - Content: - 16 Opaceous dentine Powders (A1 to D4 of 20g) - 2...
US$ 469.11
+Info
105833
VISION LOW - ASSORTMENT S3 KIT - Content: - 16 Dentine Powders (A1 to D4 of 20g) - 2 Model li...
US$ 469.11
+Info
105834
VISION LOW - ASSORTMENT S4 KIT - Content: - 4 Incisal (57+58+59+60 of 20g) - 4 Intensive Opaq...
US$ 409.32
+Info
105835
VISION LOW - ASSORTMENT S5 KIT - Content: - 3 Intensive Opaque (Yellow - Orange - Brown) - 3 ...
US$ 175.49
+Info
105836
VISION LOW - ASSORTMENT S6 KIT - Content: 4 Shoulder (Cream - Yellow - Red - Brown of 20g) -...
US$ 87.72
+Info
105837
VISION LOW - ASSORTMENT S7 KIT - Content: 20 Different shades in packs of 5 units to choose f...
US$ 1,175.36
+Info
105838
VISION LOW - ASSORTMENT S8 KIT - Content: 13 Different shades in packs of 5 units to choose f...
US$ 764.04
+Info
105857
VISION LOW - TEST KIT No. 1 - Content: Opaque (A3 20g) - Opaceous dentine (A3 20g) - Dentine ...
US$ 146.29
+Info
105858
VISION LOW - TEST KIT No. 2 - Content: 5 Low Press CT2 (Redish) - 5 Low Press (A3) - Opaque ...
US$ 385.21
+Info
LIQUIDS V-LOW
21/05/2010 / 1284
205
Porcelains
Vision Low
Price
+
105841
Code
VISION LOW - Vision Low Shoulder Liquid 25ml [ Porcelain ]
Name
US$ 10.15
+Info
105839
VISION LOW - Vision Low Shoulder 50ml [ Porcelain ]
US$ 13.51
+Info
105813
VISION LOW - Vision Low Opaque Liquid 50ml [ Porcelain ]
US$ 13.51
+Info
105812
VISION LOW - Vision Low Opaque Liquid 25ml [ Porcelain ]
US$ 10.19
+Info
105795
VISION LOW - Vision Low Model Liquid 50ml [ Porcelain ]
US$ 12.78
+Info
105794
VISION LOW - Vision Low Model Liquid 25ml [ Porcelain ]
US$ 9.83
+Info
105793
VISION LOW - Vision Low Model Liquid 250 Ml [ Porcelain ]
US$ 45.14
+Info
105723
VISION LOW - Vision Low Glaze & Stain Liquid 50ml [ Porcelain ]
US$ 30.53
+Info
105722
VISION LOW - Vision Low Glaz & Stain Liquid 25ml [ Porcelain ]
US$ 19.66
+Info
OPAC DENTINE V-LOW
Price
+
105796
Code
VISION LOW - Vision Low Opacious Dentine A1 20gr [ Porcelain ]
Name
US$ 29.40
+Info
105797
US$ 29.40
+Info
105798
US$ 29.40
+Info
105799
VISION LOW - Vision Low Opacious Dentine A3.5 20gr [ Porcelain ]
US$ 29.40
+Info
106223
US$ 29.40
+Info
105801
VISION LOW - Vision Low Opacious Dentine B1 20gr [ Porcelain ]
US$ 29.40
+Info
105802
US$ 29.40
+Info
105803
US$ 29.40
+Info
105804
US$ 29.40
+Info
105805
VISION LOW - Vision Low Opacious Dentine C1 20gr [ Porcelain ]
US$ 29.40
+Info
105806
US$ 29.40
+Info
105807
US$ 29.40
+Info
105808
US$ 29.40
+Info
105809
VISION LOW - Vision Low Opacious Dentine D2 20gr [ Porcelain ]
US$ 29.40
+Info
105810
US$ 29.40
+Info
105811
US$ 29.40
+Info
105788
VISION LOW - Vision Low Int Opacious Dentine White 20gr [ Porcelain ]
US$ 29.40
+Info
105789
VISION LOW - Vision Low Int Opacious Dentine Yellow 20gr [ Porcelain ]
US$ 29.40
+Info
OPAQUE V-LOW
Price
+
105823
Code
VISION LOW - Vision Low Opaque Bleach 20gr
Name
US$ 29.40
+Info
105814
VISION LOW - Vision Low Opaque A1 20gr
US$ 29.40
+Info
105815
US$ 29.40
+Info
105816
US$ 29.40
+Info
105817
VISION LOW - Vision Low Opaque A3.5 20gr
US$ 29.40
+Info
105818
US$ 29.40
+Info
105819
VISION LOW - Vision Low Opaque B1 20gr
US$ 29.40
+Info
105820
US$ 29.40
+Info
105821
US$ 29.40
+Info
105822
US$ 29.40
+Info
105824
VISION LOW - Vision Low Opaque C1 20gr
US$ 29.40
+Info
105825
US$ 29.40
+Info
105826
US$ 29.40
+Info
105827
US$ 29.40
+Info
105828
VISION LOW - Vision Low Opaque D2 20gr
US$ 29.40
+Info
105829
US$ 29.40
+Info
105830
US$ 29.40
+Info
Price
+
INTENSIVE OPAQUE V-LOW
Code
206
Name
21/05/2010 / 1284
Porcelains
Vision Low
105790
VISION LOW - Vision Low Int Opaque Brown 20gr [ Porcelain ]
US$ 29.40
+Info
105791
VISION LOW - Vision Low Int Opaque Orange 20gr [ Porcelain ]
US$ 29.40
+Info
105792
VISION LOW - Vision Low Int Opaque Yellow 20gr [ Porcelain ]
US$ 29.40
+Info
SHOULDER V-LOW
Price
+
105843
Code
VISION LOW - Vision Low Shld Yellow 20gr
Name
US$ 29.40
+Info
105842
VISION LOW - Vision Low Shld Red-Brown 20gr
US$ 29.40
+Info
105840
VISION LOW - Vision Low Shld Cream 20gr
US$ 29.40
+Info
STAINS V-LOW
Price
+
105844
Code
VISION LOW - Vision Low Stain A 3gr [ Porcelain ]
Name
US$ 18.38
+Info
105845
VISION LOW - Vision Low Stain B 3gr [ Porcelain ]
US$ 18.38
+Info
105846
VISION LOW - Vision Low Stain Blue 3gr [ Porcelain ]
US$ 18.38
+Info
105847
VISION LOW - Vision Low Stain C 3gr [ Porcelain ]
US$ 18.38
+Info
105848
VISION LOW - Vision Low Stain Chestnut 3gr [ Porcelain ]
US$ 18.38
+Info
105849
VISION LOW - Vision Low Stain D 3gr [ Porcelain ]
US$ 18.38
+Info
105850
VISION LOW - Vision Low Stain Glaze 3gr [ Porcelain ]
US$ 18.38
+Info
105851
VISION LOW - Vision Low Stain Grey 3gr [ Porcelain ]
US$ 18.38
+Info
105852
VISION LOW - Vision Low Stain Honey 3gr [ Porcelain ]
US$ 18.38
+Info
105853
VISION LOW - STAIN ASSORTMENT KIT - Content: 8 Stain (White - Honey - Olive - Red brown - Che...
US$ 220.22
+Info
105854
VISION LOW - Vision Low Stain Olive 3gr [ Porcelain ]
US$ 18.38
+Info
105855
VISION LOW - Vision Low Stain Red-Brown 3gr [ Porcelain ]
US$ 18.38
+Info
105856
VISION LOW - Vision Low Stain White 3gr [ Porcelain ]
US$ 18.38
+Info
TRANSLUCENTS V-LOW
Price
+
105859
Code
VISION LOW - Vision Low Trans Clear 20gr
Name
US$ 29.40
+Info
105860
VISION LOW - Vision Low Trans Grey 20gr
US$ 29.40
+Info
105861
VISION LOW - Vision Low Trans Neutral 20gr
US$ 29.40
+Info
105862
VISION LOW - Vision Low Tr Opal Inc Blue 20
US$ 29.40
+Info
105863
VISION LOW - Vision Low Tr Opal Inc Neut 20
US$ 29.40
+Info
105864
VISION LOW - Vision Low Trans Red 20gr
US$ 29.40
+Info
105865
VISION LOW - Vision Low Trans Yellow 20gr
US$ 29.40
+Info
Price
+
LOW PRESS PORCELAIN ( Vision )
Dual low fusion Porcelain for
-Pressable ceramics
-Inlay-Onlay
-Venners
-Press over metal (PFM) Cte 13.8-14.9 (25c-500c) Vickers Hardnes 470 - Easy handling, no slumping -during build up. Vita
shade reproduction and natural fluorescence.
-Translucent ingots
-Opacious Ingots
-Dentine Ingots
-Semi Translucent body
DENTINE INGOTS
Contain : 5 INGOTS 2 gr each
Code
21/05/2010 / 1284
Name
207
Porcelains
Vision Low
105743
VISION LOW - Vision Low Ingot Baoo
US$ 59.07
+Info
105742
VISION LOW - Vision Low Ingot Bao
US$ 59.07
+Info
105733
VISION LOW - Vision Low Ingot A1
US$ 59.07
+Info
105734
US$ 59.07
+Info
105735
US$ 59.07
+Info
105736
VISION LOW - Vision Low Ingot A3.5
US$ 59.07
+Info
105737
US$ 59.07
+Info
105745
VISION LOW - Vision Low Ingot Bboo
US$ 59.07
+Info
105744
VISION LOW - Vision Low Ingot Bbo
US$ 59.07
+Info
105738
VISION LOW - Vision Low Ingot B1
US$ 59.07
+Info
105739
US$ 59.07
+Info
105740
US$ 59.07
+Info
105741
US$ 59.07
+Info
105746
VISION LOW - Vision Low Ingot C1
US$ 62.06
+Info
105747
US$ 62.06
+Info
105748
US$ 62.06
+Info
105749
US$ 62.06
+Info
105757
VISION LOW - Vision Low Ingot D2
US$ 62.06
+Info
105758
US$ 62.06
+Info
105759
US$ 62.06
+Info
OPACIOUS INGOTS
Price
+
105764
Code
VISION LOW - Vision Low Ingot Op1
Name
US$ 62.06
+Info
105765
VISION LOW - Vision Low Ingot Op2
US$ 62.06
+Info
SEMI TRANSLUCENT BODY
Price
+
105760
Code
VISION LOW - Vision Low Ingot Lbo Bleach 2g
Name
2 grams
Grams
US$ 64.97
+Info
105770
VISION LOW - Vision Low Ingot Ta1 2gr
2 grams
US$ 64.97
+Info
105772
2 grams
US$ 64.97
+Info
105774
2 grams
US$ 64.97
+Info
105776
VISION LOW - Vision Low Ingot Tb1 2gr
2 grams
US$ 64.97
+Info
105778
2 grams
US$ 64.97
+Info
105780
2 grams
US$ 64.97
+Info
105782
VISION LOW - Vision Low Ingot Tc1 2gr
2 grams
US$ 64.97
+Info
105784
2 grams
US$ 64.97
+Info
105786
VISION LOW - Vision Low Ingot Td2 2gr
2 grams
US$ 64.97
+Info
105761
VISION LOW - Vision Low Ingot Lbo Bleach 5g
5 grams
US$ 153.61
+Info
105773
5 grams
US$ 153.61
+Info
105775
5 grams
US$ 153.61
+Info
105777
5 grams
US$ 153.61
+Info
105779
5 grams
US$ 86.45
+Info
105781
5 grams
US$ 153.61
+Info
105783
5 grams
US$ 153.61
+Info
105785
5 grams
US$ 153.61
+Info
105787
VISION LOW - Vision Low Ingot Td2 5gr
5 grams
US$ 153.61
+Info
TRANSLUCENT INGOTS
Code
105766
208
Name
VISION LOW - Vision Low Ingot T1 [ Porcelain ]
Price
+
US$ 62.06
+Info
21/05/2010 / 1284
Porcelains
Vision Low
105767
US$ 62.06
+Info
105768
US$ 62.06
+Info
105769
US$ 62.06
+Info
105762
VISION LOW - Vision Low Ingot Nt [ Porcelain ]
US$ 62.06
+Info
105763
VISION LOW - Vision Low Ingot Nw [ Porcelain ]
US$ 62.06
+Info
105750
VISION LOW - Vision Low Ingot Cl [ Porcelain ]
US$ 62.06
+Info
105751
VISION LOW - Vision Low Ingot Ct1 [ Porcelain ]
US$ 62.06
+Info
105753
US$ 62.06
+Info
105755
US$ 62.06
+Info
105756
US$ 62.06
+Info
105771
VISION LOW - Vision Low Ingot Ta1 5 gr [ Porcelain ]
US$ 153.61
+Info
105752
VISION LOW - Vision Low Ingot Ct1 5gr [ Porcelain ]
US$ 153.61
+Info
105754
VISION LOW - Vision Low Ingot Ct2 5gr [ Porcelain ]
US$ 153.61
+Info
Porcelains
Vision Zirkon porcelain
ZIRKON ( Vision )
Innovations bring new materials! With its high strength and delicate frameworks, zirconium oxide is
enjoying increased popularity.
Wohlwends Vision Zirkon provides a new standard for shade accuracy.
Its exact CTE settings and excellent adhesion result in optimum performance on different zirconium oxide
framworks.
This protects restorations from cracks, checks and fractures.
- Shade accuracy
- Superb natural esthetics
- Easy handling
- Great stacking / carving abilities
- Outstanding adhesion
- Exact CTE settings
- Excellent bonding strength
DENTINE (Vision Zirkon)
Price
+
105129
Code
ZIRKON - Vision Zirkon Dentine Body A1 20gr [ Porcelain ]
Name
US$ 29.30
+Info
105130
US$ 29.30
+Info
105131
US$ 29.30
+Info
105132
ZIRKON - Vision Zirkon Dentine Body A3.5 20gr [ Porcelain ]
US$ 29.30
+Info
105133
US$ 29.30
+Info
105134
ZIRKON - Vision Zirkon Dentine Body B1 20gr [ Porcelain ]
US$ 29.30
+Info
105135
US$ 29.30
+Info
105136
US$ 29.30
+Info
105137
US$ 29.30
+Info
105138
ZIRKON - Vision Zirkon Dentine Body C1 20gr [ Porcelain ]
US$ 29.30
+Info
105139
US$ 29.30
+Info
105140
US$ 29.30
+Info
105141
US$ 29.30
+Info
105142
ZIRKON - Vision Zirkon Dentine Body D2 20gr [ Porcelain ]
US$ 29.30
+Info
105143
US$ 29.30
+Info
105144
US$ 29.30
+Info
GINGIVAL (Vision Zirkon)
21/05/2010 / 1284
209
Porcelains
Code
105145
Name
ZIRKON - Vision Zirkon Gingival Pink 20
Price
+
US$ 29.30
+Info
GLAZE (Vision Zirkon)
Code
105147
Name
ZIRKON - Vision Zirkon Glaze 20gr
Price
+
US$ 29.30
+Info
INCISAL (Vision Zirkon)
Price
+
105149
Code
ZIRKON - Vision Zirkon Inc #57 20gr
Name
US$ 29.30
+Info
105150
US$ 29.30
+Info
105151
US$ 29.30
+Info
105152
US$ 29.30
+Info
105153
ZIRKON - Vision Zirkon Int Inc White 20
US$ 29.30
+Info
105154
ZIRKON - Vision Zirkon Int Inc Yellow 2
US$ 29.30
+Info
105166
ZIRKON - Vision Zirkon Opal Inc Blue 20
US$ 29.30
+Info
105167
ZIRKON - Vision Zirkon Opal Inc Neutral
US$ 29.30
+Info
KITS (Assortments - Zirkon)
Code
105195
Name
ZIRKON - TEST KIT No. 1- Content: Liner 2 20g - Opaceous dentine White 20g - D-A3 20g - I...
Price
+
US$ 146.37
+Info
LINER (Vision Zirkon)
Price
+
105155
Code
ZIRKON - Vision Zirkon Liner L1 20gr
Name
US$ 29.30
+Info
105157
ZIRKON - Vision Zirkon Liner L2 2Og
US$ 29.30
+Info
105159
ZIRKON - Vision Zirkon Liner L3 20gr
US$ 29.30
+Info
105184
ZIRKON - Vision Zirkon Spray Liner L-1
US$ 58.97
+Info
105185
US$ 58.97
+Info
105186
US$ 58.97
+Info
LIQUIDS (Vision Zirkon)
Price
+
105146
Code
ZIRKON - Vision Zirkon Glaze&Stain Liq
Name
US$ 19.70
+Info
105148
ZIRKON - Vision Zirkon Glaze Liq 50ml
US$ 14.88
+Info
105161
ZIRKON - Vision Zirkon Model Liq 25 Ml
US$ 9.79
+Info
105162
ZIRKON - Vision Zirkon Model Liq 250Ml
US$ 45.28
+Info
105163
ZIRKON - Vision Zirkon Model Liq 50 Ml
US$ 12.78
+Info
OPACEOUS DENTIN (Vision Zirkon)
Code
210
Price
+
105164
ZIRKON - Vision Zirkon Od Honey 20gr
Name
US$ 29.30
+Info
105165
ZIRKON - Vision Zirkon Od White 20gr
US$ 29.30
+Info
21/05/2010 / 1284
Porcelains
PRESS (Vision Zirkon)
Price
+
105168
Code
ZIRKON - Vision Zirkon Press Ingot A1
Name
US$ 63.48
+Info
105169
US$ 63.48
+Info
105170
US$ 63.48
+Info
105171
ZIRKON - Vision Zirkon Press Ingot B1
US$ 63.48
+Info
105172
US$ 63.48
+Info
105173
US$ 63.48
+Info
105174
ZIRKON - Vision Zirkon Press Ingot Blea
US$ 63.48
+Info
105175
ZIRKON - Vision Zirkon Press Ingot Ta1
US$ 63.48
+Info
105176
US$ 63.48
+Info
105177
US$ 63.48
+Info
105178
ZIRKON - Vision Zirkon Press Ingot Tb1
US$ 63.48
+Info
105179
US$ 63.48
+Info
105180
US$ 63.48
+Info
SHOULDER (Vision Zirkon)
Price
+
105181
Code
ZIRKON - Vision Zirkon Shld Creme 20gr
Name
US$ 29.30
+Info
105182
ZIRKON - Vision Zirkon Shld Redbrown 20
US$ 29.30
+Info
105183
ZIRKON - Vision Zirkon Shld Yellow 20gr
US$ 29.30
+Info
STAIN (Vision Zirkon)
Price
+
105187
Code
ZIRKON - Vision Zirkon Stain Blue 3gr
Name
US$ 17.43
+Info
105188
ZIRKON - Vision Zirkon Stain Chestnut 3
US$ 17.43
+Info
105189
ZIRKON - Vision Zirkon Stain Glaze 3gr
US$ 17.43
+Info
105190
ZIRKON - Vision Zirkon Stain Grey 3gr
US$ 17.43
+Info
105191
ZIRKON - Vision Zirkon Stain Honey 3gr
US$ 17.43
+Info
105192
ZIRKON - Vision Zirkon Stain Olive 3gr
US$ 17.43
+Info
105193
ZIRKON - Vision Zirkon Stain Redbrown 3
US$ 17.43
+Info
105194
ZIRKON - Vision Zirkon Stain White 3gr
US$ 17.43
+Info
TRANSLUCENT (Vision Zirkon)
Price
+
105196
Code
ZIRKON - Vision Zirkon Trans Blue 20gr
Name
US$ 29.30
+Info
105197
ZIRKON - Vision Zirkon Trans Clear 20gr
US$ 29.30
+Info
105198
ZIRKON - Vision Zirkon Trans Grey 20gr
US$ 29.30
+Info
105199
ZIRKON - Vision Zirkon Trans Neutral 20
US$ 29.30
+Info
105200
ZIRKON - Vision Zirkon Trans Yellow 20g
US$ 29.30
+Info
Protection Glasses
ECCO-140-29.375 Welding Goggles ea
US$ 12.00
Goggles Welding - [ Casting glasses - proteccion lens - ]
21/05/2010 / 1284
211
Reliners Soft
Reliners Soft
THERMO-ADJUSTABLE RELINES ( Versacryl )
- This unique product has been developed to create thermo-adjustable relines
- It is a heat sensitive liner that softens in warm water between 120-205 degrees fahrenheit
- At body temperature the versacryl has an extremely comfortable cushiony effect that yields to
pressure and actually creates better suction than conventional soft liners
- Versacryl is a cross-linked acrylic denture material guaranteed to create a chemical bond with
all other denture acrylics
- Available in heat cure and self cure
- No special equipment is needed to process
Price
+
101120
Code
VERSACRYL - Versacryl Clear Powder 1lb
Name
US$ 148.00
+Info
101119
VERSACRYL - Versacryl Pink powder 1lb
US$ 148.50
+Info
100915
VERSACRYL - Versacryl Lab Kit Self Cured
US$ 148.50
+Info
100914
VERSACRYL - Versacryl Lab Kit Heat cured
US$ 148.50
+Info
Reliners Soft
Solft Reliners
FLEXITE - 101823 Flexil soft liner Kit
US$ 92.00
FLEXIL SOFT LINER KIT
*Quick 30min or Regular Cure Options
*Red Veins to Match Acrylic
*2 Binder
*1 Quick Cure Catalyst
*1 Cleaner
*1 Flexil Catalyst
*FDA Registered
*Remains soft Indefinitely
*Allergy Free
See Photo for More Details
MOLLOPLAST B ( Buffalo )
MOLLOPLAST-B is an industry-leading heatprocessedsilicone material that stayssoft permanently and features
decadesof documented success in denturereline cases. The material bondsfirmly to new or existing acrylicdentures,
and stays elastic andbacteria free for years
Price
+
009-58600_A
Code
BUFFALO - Molloplast-B Lustrol- 6ml. Bas
US$ 26.60
+Info
009-62300
BUFFALO - Molloplast-B Microwave 45gr
US$ 120.00
+Info
009-62310
BUFFALO - Molloplast-B Microwave 170gr
US$ 296.80
+Info
212
Name
21/05/2010 / 1284
Reliners Soft
Solft Reliners
MOLLOSIL PLUS ( Buffalo )
Mollosil plus features proven soft reline performance in an A-Silicone based, cold-curing automix formula. Packaged in
the improved and easy-to-use Automix 2 cartridge system, mollosil plus allows the creation of perfect chair side relines in
one office visit. The high performance material permanently adheres to acrylic dentures and resists bacterial
contamination for years
Price
+
009-62322
Code
BUFFALO - Mollosil Standardpack 50ml
Name
US$ 142.00
+Info
009-62321
BUFFALO - Mollosil Smallpack 30ml
US$ 110.00
+Info
Rubber Polishers
RUBBER POINTS ( Ecco )
- Privated labeled by on of the most famous.
- This products might stay out of specials for international shipping rates
Price
+
100745
Code
ECCO - ECCO- BLACK Rubber Clasp polisher 100pk - 150 grit coarse - [goma punta negra ]
Name
US$ 8.00
+Info
100744
ECCO - ECCO- GREEN Rubber Clasp polisher 100pk - 180 grit medium - ...
US$ 8.00
+Info
100743
ECCO - ECCO- BLUE FLEX Rubber Clasp polisher 100pk - 220 grit fine - [goma punta azul ]
US$ 8.00
+Info
100742
ECCO - ECCO- GRAY HARD Rubber Clasp polisher - 100pk - 240 grit -X- fine stiff - ...
US$ 8.00
+Info
100490
ECCO - ECCO - RED HARD Rubber Clasp polisher 100pk - 240 grit - fine hard ...
US$ 8.00
+Info
100741
ECCO - ECCO- SUPERIOR RED Rubber Clasp polisher 100pk - 240 grit -X- fine - ...
US$ 7.50
+Info
RUBBER POINT FOR FLEXIBLES
Price
+
101140
Code
ECCO - ECCO Mounted Rubber Point Large Green - for acrilycs and flexibles - 100pk ...
US$ 54.00
+Info
100779
ECCO - ECCO Mounted Rubber Point Medium Green - for acrilycs and flexibles - 100pk ...
US$ 45.00
+Info
103931
ECCO - ECCO Mounted Rubber Point Large Green - for acrilycs and flexibles - 10pk ...
US$ 7.00
+Info
103929
ECCO - ECCO Mounted Rubber Point Medium Green - for acrilycs and flexibles - 10pk ...
US$ 6.00
+Info
100780
ECCO - ECCO Mounted Rubber Point Medium Red - for acrilycs and flexibles - 100pk ...
US$ 45.00
+Info
101141
ECCO - ECCO Mounted Rubber Point Large Red- for acrilycs and flexibles - 100pk ...
US$ 54.00
+Info
103930
ECCO - ECCO Mounted Rubber Point Medium Red - for acrilycs and flexibles - 10pk ...
US$ 6.00
+Info
103932
ECCO - ECCO Mounted Rubber Point Large Red- for acrilycs and flexibles - 10pk ...
US$ 7.00
+Info
21/05/2010 / 1284
Name
213
Rubber Polishers
SHOFU
ACRYPOINT
SHOFU ACRYPOINT - SHOFU ACRYPOINT
US$ 0.00
+Info
RUBBER POINT FOR FLEXIBLES ( Cfs )
Code
214
Price
+
245106
CFS - CFS Rubber Points -Small - 10pk - used for finishing touches and adjustments on ...
Name
US$ 10.66
+Info
246106
CFS - CFS Rubber Points -Large - 10pk - used for finishing touches and adjustments on ...
US$ 10.86
+Info
259106
CFS - CFS-Diamont Caps - 5pk - Rubber points that are perfectly suited for finishig t...
US$ 11.47
+Info
21/05/2010 / 1284
Rubber Polishers
CERAMISTE ( SHOFU )
21/05/2010 / 1284
215
Rubber Polishers
Acrylic & Flex. Polishers
Rubber Polishers
ACRYPOINT ( SHOFU )
CFS - 220106 Brown Rubber Wheels 100pk
US$ 15.52
CFS Brown Rubber Wheels - 100pk - made from a soft material used to rubberize the entire partial before
polishing - [C# 220106 ]
Rubber Polishers
Clasp polisher (Rubber)
RUBBER POINTS ( Keystone )
- Pure fine silicon carbide abrasive in synthetic rubber combines excellent finish on chrome w/ long wear
Price
+
034-1640010
Code
KEYSTONE - SUPERIOR REGULAR Rubber Clasp polisher - Dark grey - 240grit - 15/16 x 1/4in ...
US$ 9.90
+Info
034-1640020
KEYSTONE - SUPERIOR HARD Rubber Clasp polisher - Dark Grey 240grit - 15/16 x 1/4in (23.8...
US$ 9.90
+Info
034-1640050
KEYSTONE - SUPERIOR BLACK Rubber Clasp polisher - Black 150grit - 15/16 x 1/4in (23.8 x ...
US$ 9.90
+Info
216
Name
21/05/2010 / 1284
Rubber Polishers
034-1640060
KEYSTONE - SUPERIOR GREEN
US$ 9.90
+Info
034-1640070
KEYSTONE - SUPERIOR BLUE Rubber Clasp polisher - Blue 220grit - 15/16 x 1/4in (23.8 x 6...
Rubber Clasp polisher - Green 180grit - 15/16 x 1/4in (23.8...
US$ 9.90
+Info
034-1640075
KEYSTONE - SUPERIOR BLUE FLEX
US$ 9.90
+Info
034-1640080
KEYSTONE - SUPERIOR RED Rubber Clasp polisher - Red 240grit - 15/16 x 1/4in (23.8 x 6....
US$ 9.90
+Info
034-1640081
KEYSTONE - SUPERIOR HARD RED- Rubber Clasp polisher - Red 240grit - 15/16 x 1/4in (23.8 x...
US$ 9.90
+Info
Rubber Clasp polisher - Blue 220grit - 15/16 x 1/4in (23....
Rubber Polishers
Rubber Wheels for Lathes
CFS - 242106 Brown Rubber Wheels - Lg
US$ 20.25
CFS Brown Rubber Wheels - Lg - used before giving polish to unbreakable partials [C# 242106 ] - each sold separatley -
CFS - 243106 Brown Rubber Wheels - Sm
US$ 17.57
CFS Brown Rubber Wheels - Sm - used before giving polish to our unbreakable partials. [C# 243106]
KEYSTONE-034-1900050 Rubber Wheel Gray Regular 1pk
US$ 12.00
Rubber Gray Wheel - 3in x 3/8in (76 x 9.5mm) - Flexibles Acrylic and Baseplate Wheel grinder - Coarse grit - Rubber bonded
wheel -[ for g r i n d i n g acrylic or flexibles - use normal lathe speed- & for baseplates -use - low speed ] Rueda Para Placa Base
Acrilico y Flexibles - Polish flexible flexite va l p l a st tcs ]
Rubber Polishers
Rubber wheels
INTERPROXIMAL RUBBER WHELLS ( Keystone )
- 7/8 Diam x 0.40 mm Thickness
Price
+
034-1900850
Code
KEYSTONE - INTERPROXIMAL Rubber Wheels Black 7/8 x .040mm Box/25Pcs
Name
US$ 12.50
+Info
034-1900855
KEYSTONE - INTERPROXIMAL Rubber Wheels Green 7/8 x .040mm Box/25Pcs
US$ 12.50
+Info
034-1900860
KEYSTONE - INTERPROXIMAL Rubber Wheels Blue 7/8 x .040mm Box/25Pcs
US$ 12.50
+Info
034-1900865
KEYSTONE - INTERPROXIMAL Rubber Wheels Red 7/8 x .040mm Box/25Pcs
US$ 12.50
+Info
034-1900870
KEYSTONE - INTERPROXIMAL Rubber Wheels White 7/8 x .040mm Box/25Pcs
US$ 12.50
+Info
RUBBER WHEELS ( Ecco )
Price
+
100746
Code
ECCO - ECCO-SQ EDGE WHITE Rubber Wheels 100pk - 220 grit fine
US$ 8.70
+Info
100747
ECCO - ECCO-SQ EDGE RED HARD Rubber Wheels 100pk - 240 grit fine hard - ...
US$ 8.00
+Info
100748
ECCO - ECCO-SQ EDGE RED SUPERIOR RubberWheels 100pk - 240 grit extra fine ...
US$ 8.00
+Info
21/05/2010 / 1284
Name
217
Rubber Polishers
Rubber wheels
100749
ECCO - ECCO-SQ EDGE GRAY Rubber Wheels 100pk -240 grit -X- fine stiff [goma rueda gris]
US$ 8.00
+Info
100750
ECCO - ECCO-SQ EDGE BLUE FLEX Rubber Wheels 100pk - 220 grit fine medium -...
US$ 8.00
+Info
100751
ECCO - ECCO-SQ EDGE GREEN Rubber Wheels 100pk - 180 grit medium - [goma rueda verde]
US$ 8.00
+Info
100752
ECCO - ECCO-SQ EDGE BLACK Rubber Wheels 100pk - 150 grit coarse - [goma rueda negra]
US$ 9.50
+Info
RUBBER WHEELS KNIFE EDGE ( Keystone )
Price
+
034-1900610
Code
KEYSTONE - KNIFE EDGE rubber wheels Dk Grey 5/8 [15.8mm ] 100box
Name
US$ 28.00
+Info
034-1900830
KEYSTONE - KNIFE EDGE rubber wheels Green - 5/8 (15.8mm) 100box [filo de cuchillo] [goma]
US$ 28.00
+Info
034-1900835
KEYSTONE - KNIFE EDGE rubber wheels Blue - 5/8 (15.8mm) 100box [filo de cuchillo] [goma]
US$ 28.00
+Info
034-1900840
KEYSTONE - KNIFE EDGE rubber wheels Red - 5/8 (15.8mm) 100box [filo de cuchillo] [goma]
US$ 28.00
+Info
034-1900845
KEYSTONE - KNIFE EDGE White Rubber Wheels -5/8 (15.8mm) 100box non contaminating for porcel...
US$ 28.00
+Info
034-1900875
KEYSTONE - KNIFE EDGE rubber wheels Black - 100box [filo de cuchillo] 7/8 (22mm) [goma]
US$ 28.00
+Info
034-1900880
KEYSTONE - KNIFE EDGE rubber wheels Green - 100box [filo de cuchillo] 7/8 (22mm) [goma]
US$ 28.00
+Info
034-1900885
KEYSTONE - KNIFE EDGE rubber wheels Blue - 100box [filo de cuchillo] 7/8 (22mm) [goma]
US$ 28.00
+Info
034-1900990
KEYSTONE - KNIFE EDGE rubber wheels Red - 100box [filo de cuchillo] 7/8 (22mm) [goma]
US$ 28.00
+Info
034-1900995
KEYSTONE - KNIFE EDGE White Rubber Wheels -7/8 (22mm) 100box - Non contaminating for porce...
US$ 28.00
+Info
RUBBER WHEELS SUP HARD ( Keystone )
Code
Price
+
KEYSTONE - SUPERIOR HARD RED - Rubber Polishing Wheels - 240grit - 7/8 x I/8in (22.2 x 3...
US$ 9.90
+Info
034-1900820
KEYSTONE - SUPERIOR WHITE Square Edge Rubber Polishing Wheels White - 220grit - - 7/8 x ...
US$ 16.20
+Info
034-1900815
KEYSTONE - SUPERIOR RED Rubber Polishing Wheels Red - 240grit - 7/8 x I/8in (22.2 x 3.1 m...
US$ 9.90
+Info
034-1900810
KEYSTONE - SUPERIOR BLUE - Rubber Polishing Wheels - 7/8 x 1/8in (22.2 X 3.1mm) 100pk - p...
US$ 9.90
+Info
034-1900805
KEYSTONE - SUPERIOR GREEN Rubber Polishing Wheels Green - 180grit - 7/8 x I/8in (22.2 x 3...
US$ 9.90
+Info
034-1900800
KEYSTONE - SUPERIOR BLACK Rubber Polishing Wheels Black - 150grit - - 7/8 x I/8in (22.2 ...
US$ 9.90
+Info
034-1900795
KEYSTONE - SUPERIOR BLUE FLEX Rubber Polishing Wheels - 220grit - 7/8 x I/8in (22.2 x ...
US$ 9.90
+Info
034-1900580
KEYSTONE - SUPERIOR GREEN UTILITY Rubber Wheels - Green - 90grit - 7/8 x I/8in ...
US$ 14.00
+Info
034-1900560
KEYSTONE - SUPERIOR HARD - Rubber Polishing Wheels - Dark Grey - 240grit - 7/8 x I/8in (...
US$ 9.90
+Info
034-1900550
KEYSTONE - SUPERIOR REGULAR Rubber Wheels- Dark Grey - 240grit - 7/8 x 1/8in 100pk ...
US$ 9.90
+Info
034-1900540
KEYSTONE - SUPERIOR MEDIUM SOFT Rubber Polishing Wheels- Grey- 240grit - 7/8 x I/8in (2...
US$ 9.90
+Info
100489
Name
Rubber Polishers
Zirconia Polishers (Silicones)
ZIRCONIA POLISHERS DISCS ( Ecco)
- Fast shaping
- Scratch removal
- Leaves satin finish on all porcelains and final stage gloss finish on cercon
- Alumina and Zirconia copins
Code
100722
218
Name
ECCO - ECCO Dura Disc - Coarse - Blue
Price
+
US$ 22.00
+Info
21/05/2010 / 1284
Rubber Polishers
100723
ECCO - ECCO Dura Disc - X fine- Gray
US$ 22.00
+Info
100763
ECCO - ECCO Dura Disc - Fine - Pink
US$ 22.00
+Info
100930
ECCO - ECCO Dura disc X Coarse- Green
US$ 22.00
+Info
ZIRCONIA POLISHERS POINT ( Ecco)
- For fast shaping
- Scratch removal
- Leaves satin finish on all porcelains and final stage gloss finish on cercon
- Alumina and Zirconia copins
Price
+
100932
Code
ECCO - ECCO Dura Point - Fine - Pink
Name
US$ 17.00
+Info
100933
ECCO - ECCO Dura Point - X Fine -Gray
US$ 17.00
+Info
100934
ECCO - ECCO Dura Point - Coarse-Blue
US$ 17.00
+Info
Sandblasters
BUFFALO-009-75800 Pony Sandblaster Complete 110V
US$ 274.05
Pony SandblasterA compact and sturdy, bench
- The hinged 5" x 7" top window and internal lighting provide bright illumination for clear viewing, and thel
ever-type air gun recirculates abrasive and provides pin-point abrasive spray control.
- Tightly sealed left-side neoprene glove and topwindow keep dust enclosed in cabinet.
- On/Off power switch on cord for convenientcontrol of cabinet illumination.
- Efficient unit requires only 60 to 90 psicompressed air (compressor not included) foreffective operation.
- Use for removing unwanted investment, oxide,heat scales, and burs from castings and forpreparing work for
finishing.
Sandblasters
Bracket Cleaner
VH- 101391 Bracket Cleaner 23x17.5x25.5cm
US$ 195.00
VH- BRACKET CLEANER
*Pression: 50-80LBS
*Liquid: 937gr
*Dimensions: 23 x 17.5 x 25.5cm
*Type of Oxide: 90-125 micron
21/05/2010 / 1284
219
Sandblasters
One Tank Sand Blasters
Sandblasters
BASIC CLASSIC - ONE TANK ( Renfert )
Basic Classic-1Tank 70mic or 250mic ( Choice) 110v*
Basic Classic Sandblaster* 110 volts* 1 Tank - ( 2 tanks available optional )
* Lighting index : 2400LUX* Chamber volume 14 Liters
* Tank switch selection ( for optional second tank )
* Dimensions: 13 1/2 x 13 1/4 x 15 3/4in
* 70 - 70m / 90-250m* 2 Pens for optional second tank
The renfert basic classic blaster is a compact blasting design unit that can carry out all the usual blasting
tasks required with dental technology.
The blasting modules come in two versions that guarentee use with 70-70microns and 90-250m blasting
material.
Diferenciation with Other models :
This blaster has a smaller cabinet than the master and the regulator is on the outside.
FREE 220 VOLTS ADAPTOR AVAILABLE UPON REQUEST
Price
+
103431
Code
RENFERT - Basic Classic Blaster 1Ttank - 70mic -110volts - ( #2945-3055 ) 13-1/4x15-3/4x9...
Name
US$ 715.00
+Info
103433
RENFERT - Basic Classic Blaster 1Tank - 250mic - 110volts- (# 2945-3255 ) - 13-1/4x15-3/4x...
US$ 730.00
+Info
MOBILE BLASTER - ONE TANK ( Renfert )
Moblie Blaster - 1Tank Foot Control or Hand Control ( Choice )
*No power supply is required
*It's mobility is only dependant on connection to compressed air
*Ideal for use where blasting chambers already exist
*The basic mobil sandblasting unit provides the absolute basic requirements for blasting technology.
*The various modules allow you to use from 70 or 70/250m abrasives.
FOOT CONTROL
Price
+
103440
Code
RENFERT - Moblie Blaster 1Tank w/FC 70m
Name
US$ 545.00
+Info
105042
RENFERT - Moblie Blast 1Tnk w/FC 70/250m
US$ 545.00
+Info
HAND CONTROL
Price
+
105043
Code
RENFERT - Moblie Blaster 1Tank w/HC 70m
Name
US$ 453.23
+Info
105044
RENFERT - Moblie Blast 1Tnk w/HC 70/250m
US$ 453.23
+Info
VANIMAN - 103448 Sandstorm Pro Blaster&Filter
US$ 605.15
*Vaniman Sandstorm Professional Blaster and Filter
*Self contained blaster
*filter Fan
*Single Tank
*Ergonomic, Streamline State-of-the-Art Design
*Extra Large 32 oz. (900 gm)Abrasive Storage Tank
*Exclusive Non-Clogging Flow Design
*Foot Pedal Control
*Mobile Spray Jet Handle
*Heavy Duty Long Lasting Tips
*Large Fluorescent Illuminated Panoramic Viewing Area
220
21/05/2010 / 1284
Sandblasters
*Air Pressure/Moisture Filter Regulator/Gauge
*Complete Sealed Unibody Construction
Technical Specifications
*110V
*0.02Amps
Shipping dimensions: 14-1/2 x 19 x 14in
*Weight 20lb
*Self Contained Sand Filter SystemAbrasive Blasting System with self contained single tank blaster & filter-fan.
VANIMAN- 103453 Sandstorm Moblie 50-100
US$ 274.82
- One tank and Spray jet handle
- 50-100micron
- Portable and light weight : 8lb
- Holds 4lbs of media
- Designed for use with all types of abrasive material
- Long lasting crystal tips
- Exculsive non clogging flow design
- Sand system only
- No Cabinet
- Shipping info: 13x10x11in and Weight: 9lb
- Also Includes - Urethane Tubing, Foot Pedal Assembly, Air Filter Regulator Assembly and Air
Pressure Gauge.
Sandblasters
Recirculating Sandblasters
HANDLER - 103384 Sandblaster 10x10x14in
US$ 259.40
#51 Sandblaster - 10x10x14in - Includes: air line hose [ 3x1/2in] - interior light - 5lb of medium sand abrasive - filter bag - A
table top sandblaster for use with sand - glass beads - or walnut shells - designed to clean or treat the surfaes of precious
castings - copings - pontics - inlays - It has a hindged frontal access door - Rubber side glove - square window - 3in diameter
exhaust port allows for placement in a small lab area -
VH- 100901 Sandblaster 1tnk 1tip w/o Asp.
US$ 245.00
VH Sandblaster 1tnk 1tip w/out dust collector
Monojato Sand blaster 1 tank + 1 widia tip
- one recirculating sand reservoir
- foot pedal
- Filter
- Interior day light socket (bulb not included
- Working air pressure : 70-100 lb
- Automatic voltage selection - 110-220volts
- 2 years warranty ( 6 months on the widia tips )
Shipping weight : 5 kg ( 12 Lbs ) Shipping Weight: 9lb - 15x15x15 in (0)
21/05/2010 / 1284
221
Sandblasters
RENFERT-023-2960-1000 Vario-Basic- W/O Tanks- 110
Vo
US$ 1,948.00
This allround blasting unit is a combined recyclable blaster and fine sandblasting unit. Its compact
construction and multipurpose function is ideal for medium-sized and small labs. This economical unit
can carry out all the usual blasting tasks required within dental technology.
In many laboratories both precious metal and CrCo are regularly sandblasted. It is often not economical,
however, for small or medium-sized laboratories to invest in two units one for fine and one for rough
sandblasting. The amount of usage would not warrant the expenditure. As each technique has its own
particular advantages, many laboratories would like to be able to use both techniques.Renfert has
succeeded in combining the best of both worlds in the Vario basic, which can be used for all routine
sandblasting in the dental laboratory. All the advantages of Renfert microblasting and recycling
sandblasting technology are combined in one unit that requires minimum space. Its multifunctionality
combined with its compact design and competitive price make the Vario basic an ideal longterm partner
for small and medium-sized laboratories.
Sandblasters
Sand Blaster Cabinet
VANIMAN - 103449 Sandstorm Pro Cab Lght & Filtr
US$ 377.65
Sandstorm Professional Cabinet with Light & Filter Fan
*NO TANK INCLUDED
*Completely Sealed Unibody Construction
*Self Contained Sand Filter System
*110V
*0.02Amps
*Weight: 19lbs
VANIMAN - 103447 Sandstorm Pro Cab w/light only
US$ 236.60
Sandstorm Professional Cabinet with light only / no Tank / no Filter
Abrasive Blasting Cabinet only
Ergonomic, Streamline State-of-the-Art Design
Completely Sealed Unibody Construction
Large Fluorescent Illuminated Panoramic Viewing Area ( see same item with light )
222
21/05/2010 / 1284
Sandblasters
VANIMAN - 103452 Sandstorm Sandshell XL Cab
US$ 414.05
*Sand Storm Sandshell XL Cabinet with Light
*Gun siphon blaster
*Easy-to-use Trigger control Blasting Gun
*Completely Sealed Unibody Contruction
*Industructable Resin Cabinet
*Standard dust collector port for easy connection to existing system
*Heavy Duty Flexible Gloves
An economical and space-saving blasting system designed for walnut shell blasting.
*110V
*0.50 Amps
*Weight: 21lbs
VANIMAN - 103451 Sandstorm XL Cab w/light only
US$ 382.20
Large Abrasive Blasting Cabinet only
Large well lit work area with large viewing window
Indestructible sealed resin cabinet
On/off and tank selector controls located inside the cabinet
Built-in pressure delivery system including a 0-100psi adjustable filter regulator with foot pedal
control
Labor saving Easy Fill tanks hold up to 4 pounds of media
Handles all types of blasting media from 60 to 360 grit (25-250 micron)
Tungsten carbide precision tips and Sapphire crystal tips
No metal wear points from tank to nozzle providing a low cost of ownership
3 Year Warranty
(Picture shown is two tank SandStorm XL)
Sandblasters
Sand Blaster Tips
VANIMAN - 103455 Crystal Tip Lg Black 1.2mm 2pk
US$ 28.00
Vaniman Embedded Crystal Tip - Large Black - 1.2mm 2pk tips for all vaniman sandblaster models - for 50/100/250 micron - [ v# 97903 ]
VANIMAN - 103454 Crystal Tip Med Blue .8mm 2pk
US$ 28.00
Vaniman Embedded Crystal Tip - Medium Blue - .8mm 2pk tips for all vaniman sandblaster models - for 25/50 micron - [v# 97902 ]
VANIMAN - 103456 Crystal TipX Lg Red .065mm 2pk
US$ 28.00
Vaniman Embedded Crystal Tip - X Large Red - .065mm 2pk tips for all vaniman sandblaster models - for 100/250micron - [ v# 97904 ]
VANIMAN - 103459 Prec Tip Lg Violet 1.5mm 1pk
US$ 26.00
Vaniman Precision Carbide Tip - Large Violet - 1.5mm 1pk tips for all vaniman sandblaster models - for 100/250 micron - [ v# 97907 ]
21/05/2010 / 1284
223
Sandblasters
Sand Blaster Tips
VANIMAN - 103458 Prec Tip Med Green.91mm 1pk
US$ 26.00
Vaniman Precision Carbide Tip - Medium Green - .91mm 1pk tips for all vaniman sandblaster models - for 50/100 micron - [v# 97906 ]
VANIMAN - 103457 Prec Tip SmYellow .65mm 1pk
US$ 26.00
Vaniman Precision Carbide Tip - Small Yellow - .65mm 1pk tips for all vaniman sandblaster models - for 25/50 micron - [ v# 97905 ]
VH- 100847 VH Pens Widia (0.8mm)
US$ 45.00
VH- Pens (0.8mm) for sand blaster- Widia - complete pen with widia tip and hose - [ compatible with other brands ]
VH- 100860 VH Pens Widia 1.2mm
US$ 45.00
VH- Pens (1.2mm) for sand blaster- Widia - complete pen with widia tip and hose - [ compatible with other brands ]
VH- 100848 VH Tips Widia 0.8mm
US$ 29.00
VH- Tips (0.8mm) for sand blaster- Widia - widia tip -
VH- 100861 VH-Tips Widia 1.2mm
US$ 29.00
VH- Tips (1.2mm) for sand blaster- Widia - widia tip -
Sandblasters
Three Tank Sandblaster
VH- 100797 Sandblaster 3tnk 3tip 110/220V
US$ 582.06
VH-Trijato Gold Line Sand blaster
3 reservoirs : 2 tanks +1 recirc. reservoir ( one recirculating sand reservoir - Vaniman hasnt) With
recirculating option [ vaniman has only NO recirculating option ]
- 3 widia Pens with tips - [ Vaniman comes with 2 tips )
air pressure regu- broken arm magnifier ( No need plastic adhesive sheet - use it and take it off as you need )
- Interior day light
- 8 kg - Automatic voltage selection
- 110-220volts automatic
- 2 years warranty - 6 months on the tips
total volume 10.000 cm3 - working area volulme 4700c m3 - [ same as Vaniman sand blaster ] - Shipping
Weight: 17lbs - 18 x18x15 - (0)
224
21/05/2010 / 1284
Sandblasters
VANIMAN - 103443 Sandstorm Prestig 25-100-3 tnk
US$ 1,125.00
*Vaniman Sand Storm Prestige Blaster with instant on/off
*Instant off immediatlely stants and stops media flow
*Three Tanks
*One tank 25-50micron
*Two tank 50-100micron
*Powder-coated steel cabinet and with comfortable hand cuffs
*Built-in pressure delivery system including a 0-100psi adjustable filter regulator and foot pedal
control *On/off and tank selector controls located inside the cabinet
*Large, well lit work area
*Handles all types of blasting media from 60 to 360 grit (25-250 micron)
*Labor saving Easy Fill tanks hold up to 4 pounds of media
*Tungsten carbide precision tips and Sapphire crystal tips
*No metal parts to wear out providing a low cost of ownership
*3 Year Warranty
*110V
*0.05Apms
*Weight: 42lb
The next step in blasting technology . Designed for the discerning dental laboratory, the Sandstorm
Prestige provides control and convenience in micro-abrasive blasting. Non Insta-Off unit.
US$ 957.32
Vaniman Sand Storm Prestige Blaster 110Volt - Three tanks - 25-50microns - one tank - 50-100micron
two tanks - [ v# 80150 ] sandblaster 16x19x22-1/2in [v# 80150 ]*Vaniman Sand Storm Prestige
Blaster
*Three Tanks
*Two tanks 50-100micron
*Built-in pressure delivery system including a 0-100psi adjustable filter regulator and foot pedal
control *On/off and tank selector controls located inside the cabinet
*3 Year Warranty
*110V
*0.05Apms
*Weight: 42lb
The next step in blasting technology . Designed for the discerning dental laboratory, the
Sandstorm Prestige provides control and convenience in micro-abrasive blasting. Non Insta-Off
unit.
21/05/2010 / 1284
225
Sandblasters
US$ 1,239.42
Vaniman Sand Storm Prestige Blaster 110Volt - Three tanks - Instant on/off - 25-50microns - one
tank - 50-100micron - one tank - 110-250microns one tank [v# 80171 ] sandblaster 16x19x22-1/2in
[v# 80171 ]*Vaniman Sand Storm Prestige Blaster with instant on/off
*Instant off immediatlely stants and stops media flow
*Three Tanks
*Built-in pressure delivery system including a 0-100psi adjustable filter regulator and foot
pedal control *On/off and tank selector controls located inside the cabinet
*3 Year Warranty
*110V*0.05Amps
*Weight: 42lb
The next step in blasting technology . Designed for the discerning dental laboratory, the
Sandstorm Prestige provides control and convenience in micro-abrasive blasting. Non
Insta-Off unit.
US$ 854.75
*Vaniman Sand Storm Prestige Blaster
*Three Tanks
*Built-in pressure delivery system including a 0-100psi adjustable filter regulator and foot pedal control
*On/off and tank selector controls located inside the cabinet
*3 Year Warranty
*110V
*0.05Apms
*Weight: 42lb
The next step in blasting technology . Designed for the discerning dental laboratory, the Sandstorm
Prestige provides control and convenience in micro-abrasive blasting. Non Insta-Off unit.
Sandblasters
Two Tanks Sand Blasters
226
21/05/2010 / 1284
Sandblasters
BASIC CLASSIC - TWO TANK ( Renfert )
Basic Classic - 1Tank 70mic or 250mic ( Choice) 110v
* Basic Classic Sandblaster
* 110 volts
* 2 Tank
* Lighting index : 2400LUX* Chamber volume 14 Liters
* Tank switch selection ( for optional second tank )
* Dimensions: 13 1/2 x 13 1/4 x 15 3/4in* 70 - 70m / 90-250m
* 2 Pens for optional second tank
The renfert basic classic blaster is a compact blasting design unit that can carry out all the usual blasting
tasks required with dental technology.
The blasting modules come in two versions that guarentee use with 70-70microns and 90-250m blasting
material.
Diferenciation with Other models :
This blaster has a smaller cabinet than the master and the regulator is on the outside.
Price
+
105038
Code
RENFERT - Basic Classic - 2 Tanks 70/70micron - 110volt ( # 2945-4005 ) sandblaster sandbl...
Name
US$ 826.00
+Info
105039
RENFERT - Basic Classic - 2 Tanks 70/250micron - 110volt ( # 2945-4026 ) most popular mode...
US$ 826.00
+Info
105040
RENFERT - Basic Classic - 2 Tanks 250/250micron - 110volt ( # 2945-4255 ) sandblaster sand...
US$ 826.00
+Info
MASTER BLASTER - TWO TANK ( Renfert )
Master Blaster - 2Tank
70/70m, 70/250m, 250/250m ( Choice)
*110v
*2 Tanks
*Lighting index : 2400LUX
*Chamber volume 18I
*Tank switch selection and pressure contro
l*Dimensions: 15 x 15 3/4 x 10 1/2in
*70/70m, 70/250m, 250/250m
*2 Pens
*Foot switchThe renfert basic master blaster combines the increased comfort of top class fine sandblasting
with the demands of a compact unit.
This blaster has a larger cabinet than the classic and the regulator can be adjusted on the inside.
A filter for compressed air and a water separator ensure ideal blasitng conditions.
Price
+
103434
Code
RENFERT - Basic Master Blaster 2 tank - 70/70micron - 110volts -- (# 2946-4005 ) - 15x15-...
Name
US$ 899.00
+Info
103435
RENFERT - Basic Master Blaster 2 tank - 70/250micron - 110volts - (# 2946-4026 ) - 15x15-3...
US$ 924.00
+Info
105041
RENFERT - Basic Master Blaster 2 tank - 250/250micron - 110volts - (# 2946-4255 ) - 15x15-...
US$ 924.00
+Info
QUATRO BLASTER TWO TANK ( Renfert )
*Basic Quattro Sandblaster
*110V
*2 tanks
*Can be upgraded to a 3 or 4 tank
*Lighting index : 2400LUX
*Chamber volume 21Liter
*Tank switch selection and pressure control
*Dimensions: 15 x 15 3/4 x 10 1/2in
*70-250m
*2 Pens
*Foot switch
The renfert basic quattro can carry out all of the conventional applications needed within the field of dental
technology.
21/05/2010 / 1284
227
Sandblasters
Their modular construction allows the basic 2-tank modle to be up graded to a 3 or 4 tank unit.
The colour coding system for the tank lids tank and tank selector switch and blasting handles simplifies selection of the correct
combination.
An air blast nozzle is located in the interior of the blasting chamber.
QUATRO BLASTER
Code
103436
Name
RENFERT - Basic Quatro Blaster 2 Tank 70/250micron - 110V - (# 2954-1005 ) - option to ad...
Price
+
US$ 1,250.00
+Info
QUATRO BLASTER IS
Same description as the quatro blaster EXECPT this one has an Immediate Stop/Start and stop happens within a fraction of a c
second
Code
103438
Name
RENFERT - Basic Quatro IS - 2 Tank - 70/250micron - 110volts - (# 2955-1005 ) with instan...
VH- 101397 Sandblaster 2tnk/2tip 110/220V
Price
+
US$ 1,670.00
+Info
US$ 493.14
VH-Bijato Gold Line Sand blaster
- 2 tanks -1 tank for disposable sand and 1 tank for recirculating
- 2 pens with 2 tips
- 1.5 inches dust collector conection with sand filter ( dust collector not included ) - air pressure regu
- Interior day light - bulb not included
- 6 kg
- Automatic voltage selection 110-220v
- 2 years warranty
- total volume 10.000 cm3 - working area volulme 4700c m3
- [ same as Vaniman sand blaster ] -
WORLDENT - 100203 SandBlaster SS 2tnk 2pen 110V
US$ 811.00
110V - 2 Pens
Comfortable Ergonomic Design. Patent Pending "XENITE" tips.
On-board "Glass-Guard" Window Protection Film.
Excellent for Aluminum Oxide, Glass Beads, Sand or Quartz.
Comes Standard with 2 Tanks, 25-100 micron each.
250 Micron use also available. Enhanced Capacity Abravise Storage
Tanks 1.5 Kg. Additional 2 Tanks Can Be Added (for a total of 4 tanks). CE Cerfified.
228
21/05/2010 / 1284
Sandblasters
VANIMAN - 103442 Sandstorm Expert 25-100-2 tnk
US$ 590.59
*Sand Storm Expert
*110V
*2 Tank
*25 & 50-100microns
*Extra large tanks
*Labor saving easy fill tanks
*Holds up to 4lbs of media
*Exclusive non-clogging flow design
*Internal automatic air/media purging system
*Contact lens magnified viewing window
*Reduces eye strain and improves overal viewing ara
*Blast proof resin cabinet is maintenance free*
1 precision tugsten carbide tip
*1 crystal embedded tip
*Foot pedal control
*Adjustable air pressure
*Two handpieces
*3 year warranty
* Shipping Dimensions: 19 x 19 x 14in
*Weight: 20lbs
*Voltage: 115.00VAC
*Amps: 0.02
A high quality and economical blasting system for moderate to heavy production usage. Low
maintenance media flow system virtually elminates wasteful down time and lowers maintenance costs.
VANIMAN - 103441 Sandstorm Expert 50-100-2 tnk
US$ 548.40
*Sand Storm Expert
*110V
*2 Tank
*25 & 50-100microns
*Extra large tanks
*Exclusive non-clogging flow design
*Internal automatic air/media purging system
*Contact lens magnified viewing window
*Reduces eye strain and improves overal viewing ara
*Blast proof resin cabinet is maintenance free
*1 precision tugsten carbide tip
*1 crystal embedded tip
*Foot pedal control
*Adjustable air pressure
*Two handpieces
*3 year warranty
A high quality and economical blasting system for moderate to heavy production usage. Low
maintenance media flow system virtually elminates wasteful down time and lowers maintenance costs.
VANIMAN-107-V120155 Sandstorm Expert 50-250-2 tnk
US$ 590.59
Vaniman Sand Storm Expert Dual Blaster 110Volt - Two tanks - 50 - 100 & 100 - 250 microns - The micro blasting system for the laboratory professional - Low maintenance sand flow system virtually elminates wasteful
down - time and lowers maintenance Extra Large Labor Saving -Easy Fill - - sand tanks hold up to 4 pounds of
media - Foot pedal control - Adjustable Air Pressure - Twin Spray Jet Handles Dimensions: 14 x 14 x 10 Volume 1960 cubic inches - Arenadora Equipo [ v# 80103 ]
21/05/2010 / 1284
229
Sandblasters
VANIMAN - 103450 Sandstorm XL 50-1000-2 tnk
US$ 759.68
Vaniman Sand Storm XL Blaster 110V - 50-100micron - sandblaster 26*26*21in 29 lb [ VMCX11L ]
*Stand Storm XL Blaster
*110V
*50-100micron
*Large well lit worrk area with large viewing window
*Indestructable sealed resin cabinet
*On/off and tank selector controls located inside the cabinet
*Built-in pressure delivery system includeing a 0-100psi adjustable filter regulator with foot pedal
control
*Handles all types of blasting media from 60 360 grit (25-250micron)
*Tungsten carbide precision tips and sapphire crystal stips
*No metal wear points from tank to nozzle providing low cost of ownership
*3 year warranty
Sandblasters
Magnifiers for Sandblasters
VANIMAN - 103462 Perfect Mag Len 4-1/2x5-3/4in
US$ 53.97
Perfect View Magnification Lens 4-1/2x5-3/4in - magnifying overlay lens [ v# 97995 ]
BUFFALO - 103464 Pony Replacement Window
US$ 13.00
Pony Replacement Window for Sandblaster
BUFFALO - 103465 Pony Replacement Glove Lft Hnd
US$ 4.20
Pony Replacement Rubber Glove for Sandblaster - Left Hand - size 11
230
21/05/2010 / 1284
Sandblasters
VANIMAN - 103460 Sandstorm Magnifier
US$ 25.00
Sandstorm Magnifier - Viewport contact lens magnifying overlay lens [ v# 97940 ]
VANIMAN - 103461 Sandstorm XL Magnifier
US$ 25.00
Sandstorm XL Magnifier - Viewport contact lens magnifying overlay lens [ v# 97941 ]
Sandblasters
Sand Blasters parts
WORLDENT - 106760 250 micron conversion kit
US$ 24.85
Sand Shot 250 micron conversion kit Replacement (ram)
WORLDENT - 106817 Add-on docking station
US$ 519.75
Sand Shot add-on docking station - Replacement
WORLDENT - 106762 Foot pedal
US$ 74.20
Sand Shot Foot pedal - Replacement (ram)
WORLDENT - 106770 Glass guard (5/pkg)
US$ 32.90
Sand Shot Glass guard (5/pkg) - Replacement (ram)
WORLDENT - 106769 Glass replacement
US$ 44.10
Sand Shot Glass replacement - Replacement (ram)
WORLDENT - 106768 Handle complete blue
US$ 93.45
Sand Shot Handle- complete blue - Replacement (ram)
WORLDENT - 106765 Handle complete red
US$ 93.45
Sand Shot Handle- complete red - Replacement (ram)
WORLDENT - 106771 Screw cap for tank
US$ 10.50
Sand Shot Screw cap for tank - Replacement (ram)
HANDLER - 103386 Walnut Shells 20lb
US$ 53.41
#51WS Walnut Shells - 20lb Are used for removing investment and plaster from appliances - Must be utilized with higher air
pressure and larger office shipping weight 20lb
21/05/2010 / 1284
231
Sandblasters
Sand Blasters parts
WORLDENT - 106758 Xenite tips (100-250 micron)
US$ 46.20
Sand Shot Xenite tips (100-250 micron)2/pk - Replacement (ram)
WORLDENT - 106756 Xenite tips (25-100 micron)
US$ 35.00
Sand Shot Xenite tips (25-100 micron) 2/pk - Replacement (ram)
Saw Blades
SAW BLADES ( All Brands )
NO PIN BLADES
*Available in 10pk and 100pk
Price
+
9995113
Code
NEY - Laboratory Saw Blades 10pk
Name
US$ 15.00
+Info
9995114
NEY - Laboratory Saw Blades 100pk
US$ 103.88
+Info
PIN BLADES
*Available in 100pk
*Made in USA
Price
+
100958
Code
ECCO - Pinn Saw Blades 0.010x 3inches ...
Name
US$ 29.00
+Info
100957
ECCO - Pinn Saw Blades 0.007x 3inches ...
US$ 38.00
+Info
100959
ECCO - Pinn Saw Blades .007inx 5inches ...
US$ 40.32
+Info
034-1140240
KEYSTONE - 826B Pin Saw Blades 5x 0.007inches (126mm x 0.17mm ) ...
US$ 6.49
+Info
034-1140250
KEYSTONE - 826B Pin Saw Blades 5x 0.007inches (126mm x 0.17mm ) ...
US$ 49.00
+Info
034-1140175
KEYSTONE - 826 Pin Saw Blades 5x 0.010inches (126mm x 0.25mm ) ...
US$ 30.60
+Info
034-1140170
KEYSTONE - 826 Pin Saw Blades 5x 0.010inches (126mm x 0.25mm ) (blue color ) 100pk ...
US$ 30.60
+Info
Saw Blades
Frames for saw blades ( arcs )
NEY-9995112 Lab Saw Kit & 10 Blade w/Frame
US$ 19.00
Laboratory Saw Saw Kit & Ten Blades With Frame [ Arco Sierras Mango ]
KEYSTONE-1140285_A Offset Pin Saw Frame For 5in
US$ 17.10
Offset Pin Saw Frame For 5inches [127mm] Blades adjustable metalic (also ney saws and all pin saw sizes)
232
21/05/2010 / 1284
Scaler
Scaler
ULTRASURGERY ( Woodpecker )
- Tree main functions - bone, root, clean.
- The function of bone is mainly used for dental surgery, such as dental extraction, bone grafting, osteogenic
distraction, endodontic surgery, alveolar nerve decompression, cyst removal, osteoplasty, bone harvesting
techniques and periodontic surgery etc.
- The function of root is mainly for mechanical ultrasonic treatment, such as periodontic, endodontic and
prevention treatment.
- Handpiece, cable, tip holder, working tip and torque wrench can be autoclaved under the high temperature
of 135 C and the pressure of 0.22Mpa.
- The perfect monitor and alarm function of working process ensures the safety of the machine and surgery.
Main Specification
Adapter input - ~220+22V 50Hz/60Hz 360mA (Max)
Output tip vibration frequency - 24kHz ~ 29.5kHz
Output power - 3~20W
DELIVERY 20 DAYS
Code
106740
Name
WOODPECKER - Utrasurgery
Price
+
US$ 2,989.00
+Info
Scaler
Scaler Parts
DTE - 103096 Torque Wrench for Scaler -Blue
US$ 15.00
Torque Wrench for Scaler Blue
Separators & Diluent
RENFERT - 105083 Picosilk Agent w/spray 75ml
US$ 18.59
- Picosilk is a wetting agent for wax models within crown, bridge and model casting technique.
- Spray on finely using the atomiser before investing.
- Wax does not take on water-repellent characteristics after use.
- Improves the flow of investment material.
- Allows reproduction of the finest models.
- Prevents microbubbles.
- Speedy evaporation of excess liquid without becoming too cold.
Acrylic separators
21/05/2010 / 1284
233
Acrylic separators
ACRYLIC SEPARATORS ( All Brand )
- Specially formulated multipurposeliquid separator
- An excellent tin foil substitute
- Available in pink or clear color
- 1 gallon container
- Alcohol Free
Price
+
102360
Code
ECCO - ECCO Pink Separator medium 120ml - Excellent for denture acrylics and flexibles ...
Name
US$ 7.00
+Info
237106
CFS - CFS Separator - fast - economical - excellent for processing all types of acryli...
US$ 36.00
+Info
103002
ECCO - ECCO Separator - fast - economical - excellent for processing all types of acryl...
US$ 35.00
+Info
RENFERT - 105084 Iso-Stick each
US$ 25.49
- A practical, double-sided isolating stick for isolating plaster against porcelain and wax.
- Soft and hard tip for individual applications.
- Economical and precise application of isolating material.
- Comfortable and easy handling.
- The flexible tip in particular provides excellent isolation in difficult-to-reach areas.
- Isolation = Picosep
Shelfs
Double Tier
HANDLER - 103507 Db Side Double Tier Work Shelf
US$ 626.22
#213DT Double Sided Double Tier Work Shelf
- Designed for placement on top of riser where benches are placed face to face.
- The shelf is constructed of heavy sheet steel and perforated steel.
- Built to hold case pans and finished in baked, durable coating.
- Dimensions: 58 x 15-3/4 x 15-3/4 x 15-3/4in
- Weight: 90lb
HANDLER - 103512 Db Side Double Tier Work Shelf
US$ 587.02
#222DT Double Side Double Tier Work Shelf
- Dimensions: 42 x 15-3/4 x 15-3/4
- Weight: 75lb
HANDLER - 103510 Db Tier Sing Side Work Shelf
US$ 489.02
#213SDT Double Tier Single Side Work Shelf
- Double tier work shelf for ceramist bench
- Dimensions: 58 x 7-3/4 x 25-3/4
- Weight: 80lb
HANDLER - 103514 Db Tier Single Side Work Shelf
US$ 351.82
#223DT Single Side Double Tier Work Shelf
- Designed for placement on top of single position work benches.
- Constructed of heavy sheet steel and perforated steel, the shelf attaches to riser.
- Finished indurable coating.
- Dimensions: 42 x 7-3/4 x 25-3/4in
234
21/05/2010 / 1284
Shelfs
Double Tier
- Weight 75lb
Shelfs
Single Tier
HANDLER - 103511 Db Side Sing Tier Work Shelf
US$ 351.82
#222 Double Side - Single Tier - Work Shelf [H# 222 ] Dimensions: 42x15-3/4x15-3/4in - Weight 75lb
#2222 Double Side Single Tier Work Shelf
- Dimensions: 42 x 15-3/4 x 15-3/4in
- Weight: 75lb
HANDLER - 103508 Db Side SingleTier Work Shelf
US$ 489.02
#213DS Handler Double Side Single Tier Work Shelf
- Dimensions: 58 x 15-3/4 x 15-3/4 x 15-3/4in
- Weight: 90lb
HANDLER - 103513 Sg Side Single Tier Work Shelf
US$ 214.62
#223 Handler Single Side Single Tier Work Shelf
- Designed for placement on top of single position work benches.
- Constructed of heavy sheet steel and perforated steel, the shelf attaches to riser.
- Finished indurable coating.
- Dimensions: 42 x 7-3/4 x 25-3/4
- Weight: 55lb
HANDLER - 103509 Sng Side SingleTier Work Shelf
US$ 293.02
#213S Handler Single Side Single Tier Work Shelf
- Single tier work shelf for ceramist bench
- Dimensions: 58 x 7-3/4 x 15-3/4
- Weight: 65lb
Silicon wheels and points
Silic. Points
SILICONE POINTS AND WHEELS ( Keystone)
- Package available in 10 units or 100 units.
- For all metals - amalgam - porcelain - composites - coarse grit
- Especially formuted with the finest grade of silicone
- Excellent results, long lasting, makes them cost effective
Description
- BLACK - for all metals, medium grit
- WHITE - for all metals, amalgam, porcelain and composites, coarse grit
- BLUE - for final polish of porcelain or metals, final grit
21/05/2010 / 1284
235
Silicon wheels and points
Silic. Points
- PINK - for porcelain, X-fine grit
Silicone Knife Edge Wheels 100pk ( Keystone)
Price
+
034-1909005
Code
KEYSTONE - Black Medium grit Deluxe Silicone Wheelst Knife Edge - 7/8x 1/8in (22.2 x 3.1...
Name
US$ 42.00
+Info
034-1909020
KEYSTONE - White Coarse grit Deluxe Silicone Wheels Knife edge 7/8 x 1/8in (22.2 x 3.1 m...
US$ 42.00
+Info
034-1909035
KEYSTONE - Blue fine grit Deluxe Silicon Wheel Knife edge- 7/8in (22.2 mm) - 100pk
US$ 42.00
+Info
Silicone Points 100pk ( Keystone )
Price
+
034-1909010
Code
KEYSTONE - Black Medium grit Deluxe Silicone Points - 100pk
US$ 42.00
+Info
034-1909025
KEYSTONE - White Medium grit Deluxe Silicone Points - 100pk
US$ 42.00
+Info
034-1909055
KEYSTONE - Pink x fine grit Deluxe Silicon Points - 100pk
US$ 42.00
+Info
ECCO - ECCO Deluxe Silicon Point Blue - fine grit - 7/8 x 1/8in ...
US$ 42.00
+Info
100476
Name
Silicone Square Edge Wheels 100pk ( Keystone )
Price
+
034-1909000
Code
KEYSTONE - Black Medium grit Deluxe Silicone Wheels Square Edge - 7/8x 1/8in (22.2 x 3.1m...
Name
US$ 42.00
+Info
034-1909015
KEYSTONE - White Coarse grit Deluxe Silicone Square Edge - 7/8 x 1/8in (22.2 x 3.1 mm) - ...
US$ 42.00
+Info
034-1909030
KEYSTONE - Blue fine grit Deluxe Silicon Wheel Square Edge - 7/8 x 1/8in (22.2 x 3.1 mm) ...
US$ 42.00
+Info
034-1909045
KEYSTONE - Pink fine grit Deluxe Silicon Wheel Square Edge 7/8 x 1/8in (22.2 x 3.1 mm) - ...
US$ 42.00
+Info
SILICONE WHEELS AND POINTS 10PK ( Keystone )
Silicone Knife Edge Wheels 10pk ( Kestone )
Price
+
034-1909005-1
0
034-1909020-1
Code
KEYSTONE - Black Kfe med 22.2x3.1mm 10pk
Name
US$ 9.50
+Info
KEYSTONE - Whte Kn Crse 22.2x 3.1mm 10pk
US$ 9.50
+Info
0
034-1909035-1
0
KEYSTONE - Blue Kn Fine 22.2mm 10pk
US$ 9.50
+Info
Silicone Points 10pk ( Keystone )
Price
+
034-1909010-1
0
034-1909025-1
Code
KEYSTONE - Del Silic Med Pts Black 10pk
Name
US$ 9.50
+Info
KEYSTONE - Del Silic Cors Pts white 10pk
US$ 9.50
+Info
0
034-1909055-1
0
KEYSTONE - Del Silic XFine Pts Pink 10pk
US$ 9.50
+Info
Silicone Square Edge Wheels 10pk ( Keystone )
Price
+
034-1909000-1
0
034-1909015-1
Code
KEYSTONE - Black Sq med 22.2x3.1mm 10pk
Name
US$ 9.50
+Info
KEYSTONE - Whte Sq Crse 22.2x 3.1mm 10pk
US$ 9.50
+Info
0
034-1909030-1
0
034-1909045-1
KEYSTONE - Blue Sq Fine 22.2x 3.1mm 10pk
US$ 9.50
+Info
KEYSTONE - Pnk Sq XFine 22.2x 3.1mm 10pk
US$ 9.50
+Info
0
Solders
Fluxes Solders
236
21/05/2010 / 1284
Solders
Fluxes Solders
BEGO - 105071 Fluxsol flux 80gr
US$ 55.00
Ready to use for soldering precious and non-precious metal alloys.
Special Burs
Pins Burs and Drills
BUFFALO-20505 2 burs dowel pins 3/32 shank
US$ 33.25
Set of 2 Burs 4 discovering Dowel pins
-(3/32 Shank Diameter) Model Bur
- Fresa (retira el Yeso alrededor deldowel para su facil manejo y descubrimiento ) [ Burs- Dowel Pin ]
ECCO - PX119 ECCO Pindex Drill 3Pkg Car
US$ 18.00
ECCO Pindex Drill 3Pkg Carbide Drills (Fresa Mecha Taladro Dowell bur )
BUFFALO-39100 Pinsetter Drills #1- 2 Pkg.
US$ 36.18
Pinsetter Drills #1- Pkg. Of 2 (1/8 Od Shank) (idem Pindex Drill 4 Dowel pins) [ Compatible with regular medium dowel pin ]
Special Burs
Typhoon burs
CARBIDE BURS (Foredom)
- Designed for fast trimming of acrylics, and bulk trimming of dies.
Price
+
100964
Code
TYPHOON - Typhoon Carbide bur -Coarse grit BUD ...
US$ 15.00
+Info
100966
TYPHOON - Typhoon Carbide Bur- fine BUD ...
US$ 15.00
+Info
100968
TYPHOON - Typhoon Carbide Bur Coarse grit BALL NOSE ...
US$ 15.00
+Info
100969
TYPHOON - Typhoon Carbide Bur- Fine BALL NOSE ...
US$ 15.00
+Info
100970
TYPHOON - Typhoon Carbide Bur Coarse grit TAPERED ...
US$ 15.00
+Info
100971
TYPHOON - Typhoon Carbide Bur- Fine TAPERED ...
US$ 15.00
+Info
21/05/2010 / 1284
Name
237
Special Burs
Typhoon burs
100975
TYPHOON - Typhoon Carbide Bur coarse grit FLAME ...
US$ 15.00
+Info
100976
TYPHOON - Typhoon Carbide Bur Fine FLAME - ...
US$ 15.00
+Info
Splash Hoods
SPLASH HOOD ( Handler )
- A Full Line of Protective Shields and Splash Hoods are Produced by Handler.
- Splash hoods in various designs and sizes to fit your requirements are available with and
without lights, suction inlets and internal dust/pumice pans.
- Fishmouths, which may be used on the benchtop to collect dusts from handpiece grinding or
polishing motors, are built for durability and function.
- Protective shields are manufactured in various configurations to help protect the technician
and comply with OSHA standards.
Price
+
102419
Code
HANDLER - 84NL Aluminum
Splash Hood
Name
84 NL
Man#
BOTH
Side
NOt
Ligh
NOd
Shiel
2.3 Kg / 5lb
Weight
12 in high x 8 in wide x 12 in
deep (30x20x30 cm)
Dimensions
US$ 66.00
+Info
103494
HANDLER - #83NL Splash Hood 83 NL
BOTH
NO
NO
1.4 kg / 3lbs
deep (30x15x25 cm)
US$ 47.46
+Info
103495
HANDLER - #83WL Splash Hood 83 WL
w/Light - Rt
RIGHT
YES
NO
1.4 kg / 3lbs
deep (30x15x 25 cm)
US$ 49.14
+Info
103496
HANDLER - #83WL Splash Hood 83 WL
w/Light - Lt
LEFT
YES
NO
1.4 kg / 3lbs
deep (30 x15x 25 cm)
US$ 49.14
+Info
103497
HANDLER - Resin Splash Hood
w/light - Rt
86 RHL
RIGHT
YES
YES
2.3 kg / 5lbs
deep ( 30x15x 25 cm)
US$ 66.78
+Info
103498
w/light - Lt
86 RHL
LEFT
YES
YES
2.3 kg / 5lbs
US$ 66.78
+Info
103499
No Light -Rt
86 RHN
RIGHT
NO
YES
2.3 kg / 5lbs
US$ 60.90
+Info
103500
No Light -Lt
86 RHN
LEFT
NO
YES
2.3 kg / 5lbs
deep ( 30x15x25 cm)
US$ 60.90
+Info
103986
HANDLER - 86D Aluminum
Splash Hood Right
86D
RIGHT
NO
YES
1.5 Kg / 4lbs
deep (30x15x 25 cm)
US$ 74.00
+Info
Steamer Cleaners
Parts for Steamers
WORLDENT - 106779 Bottle refill
US$ 25.55
Hot-Shot Bottle refill - replacement part - (ram)
WORLDENT - 106793 Display pc board
US$ 22.75
Hot-Shot Display pc board - replacement part - (ram)
238
21/05/2010 / 1284
Steamer Cleaners
Parts for Steamers
WORLDENT - 106782 Foot pedal assembly
US$ 63.35
Hot-Shot Foot pedal assembly - Replacement (ram)
WORLDENT - 106785 Hose assembly (complete)
US$ 112.00
Hot-Shot Hose assembly (complete) - Replacement (ram)
WORLDENT - 106798 O ring kit (4 sets/kit)
US$ 22.75
Hot-Shot O ring kit (4 sets/kit) - replacement part - (ram)
WORLDENT - 106800 Pressure regulator
US$ 46.55
Hot-Shot Pressure regulator - replacement part - (ram)
Strengtheners for dentures
Braided Strengtheners
KEYSTONE-034-1810040 Twisted Braided 3-1/2in 100pk
US$ 75.00
Strengtheners- Twisted Braided Stainless 3-1/2inches - 100pk [K# 1810045 ]
KEYSTONE-034-1810035 Twisted Braided 3-1/2in 10pk
US$ 11.25
Strengtheners- Twisted Braided Stainless - 3-1/2inches - 10pk - [K# 1810035 ]
Strengtheners for dentures
Grid Strengtheners
KEYSTONE-034-1800085 Stainless Steel 2.5mm 10pk
US$ 19.80
Grid Strengtheners Stainless Steel - 2.5mm diam holes
- 10pk - refuerzo metalico para protesisacero
- Mesh - reinforce - refuerzo malla Keystone Abrasives - Keystone Dental Tools. UsDental Depot is specialized
business in Dental lab equipment & Dental Porcelain Furnaces.
Surveyors and milling units
Milling Units
21/05/2010 / 1284
239
Surveyors and milling units
Milling Units
ECCO - 103423 ECCO Surveyor Complete
US$ 268.00
ECCO-Surveyor Complete - ( no handpiece) - Set includes- Handpiece holder - Movable model plate - Tool
tips - Ecco Surveyor and Milling unit
Compatible with Standard Marathon handpieces ( does not need to be with metal tip )
All marathon handpieces fit
Model Plate with Accurate and Universal movements
Model Plate Locker ( not magnetic )
Broker Arm and vertical movements on the handpiece gives 100% perfomance
MARATHON - 100769 Marathon Surveyor 103 Complete
US$ 396.00
- No Handpiece
- Handpiece Holder
- Moveable Model Plate
- Tool Tips
BEGO-010-26061 Paraskop Milling Unit 110V
US$ 8,855.00
- Precise and universal.Locking ofjoints via magnets.
- Milling arm designed as multifunctional arm.Lever for lowering the drillingtool.Control for the milling unit
motor integrated in base.
- Milling spindle with speeds up to 30.000RPM and quick-action tool chuck.Drilling depth stop with
micrometer screw 1/100 mm. Selectorswitch for clockwise or anticlockwise operation.
- Electromagnetic locking of model table. Ideal formilling and drilling in wax.
- Extremely rugged- precision-made model table.Precision quill forattaching accessories- measuring- etc.
- Can be fixed directly to milling arm if not used - 3 WEEKSTO DELIVER - surveyor - paralelometro
- Available in 110v
Teeth Denture
Biocler G-II
240
21/05/2010 / 1284
Teeth Denture
Biocler G-II
21/05/2010 / 1284
241
Teeth Denture
Biocler G-II
242
21/05/2010 / 1284
Teeth Denture
Biocler G-II
21/05/2010 / 1284
243
Teeth Denture
PopDent Acryl Teeth
Teeth Denture
PopDent Acryl Teeth
244
21/05/2010 / 1284
Teeth Denture
PopDent Acryl Teeth
21/05/2010 / 1284
245
Torches and tips
Buttane Torches
Torches and tips
Buttane Torches
ECCCO - 100031 ECCO Mini Torch-Set Blazer
US$ 27.00
Mini Torch- (Micro) Set Blazer SO54 - Soplete Mini - a gas Butano recargable (Minitorch Blazer hot shoot )
Torches and tips
Propane Torches
ECCO - 101431 Complete Torch T-1 Harris type
US$ 250.00
- Melting Torch
- Kit Includes:
- 2 Tips: Single Orifice & Multiple Orfice [1390&1930n]
- Tip Tube Elbow [8593]
- Mixer
- Handle
- Plus 12.5in of Twin Hoses w/ Connection
- Identical to Harris
ECCO - 101764 Complete Torch T-2
Harris type
US$ 210.00
- Melting Torch
- For Propane
Kit Includes:
- 6 Tips: 3 Single Orfice & 2 Multiple Orfice
- Shower 11 Holes
- 1 Need for Microwelding
[Equivalent to 1390&1390n + 4 Other Different Tips]
- 2 Tip Tubes Elbow Type (8593)
- Mixer
- Handler
- Made in Argentina
- Pure Bronze and Plate Chrome
- Identical to Harris Torch
KEYSTONE-034-1821060 Harris Tubing w/Fittings 6ft
US$ 44.00
Harris Twin Tubing wth Fittings (Double hose 6 Feet) - Also compatible with all other torches - Mangueras para
soplete - [torch hose ]
Torches and tips
Soldering torches
246
21/05/2010 / 1284
Torches and tips
Soldering torches
ARTORCH - 101430 Sold Torch compl w/
5 tip Prop
US$ 109.00
ARTORCH Soldering system
- Sold Torch complete w/ 5 tips
- Propane Torch complete
- Mixer with 2 valves / regulators
- 5 diferent tips dor diferent solderind needs (sizes: #3 - #4- #5 - #6 - #7)
- 5 tipstand - handle - 2 hoses 6 oxygen and fuel hoses with B fittings
- Made in USA - Kit Includes: 2 valve hand torch - Instruction Booklet
Torches and tips
Tips for Torches
HARRIS -1821030 Harris Tip Shower 1390-H
US$ 43.00
Casting Tip Harris Torch Shower Pico Lluvia Punta Soplete [ 1390-H ] -
Torches and tips
Torch Hoses
NEY-007-9998621 Spect 180 Torch Dual hose 3.7m
US$ 38.60
Spectrum 180 Torch System- Dual Torch Hose- 12.5 Foot [3.75M]- Each Casting Products
Torches and tips
Parts for Torches
BLAZER - 103382 Blazer Butane 150gr
US$ 6.00
Blazer Butane 150gr - Gas refill - - Gas torch -
Tray Material
Thermoplas Tray Material
21/05/2010 / 1284
247
Tray Material
KEYSTONE - 101176 Tray Material - .150in 100pk
Tray Material -.150in [3.8mm] - 100pk - 5x5in sheets -[K# 9617330]
#NOMBRE?
KEYSTONE - 101175 Tray Material .125in 100pk
Tray Material - .125in [3mm] - 100pk - 5x5in sheets - [K# 9617320 ]
#NOMBRE?
US$ 63.50
[ thermoplastics termoformados ]
US$ 56.70
[ thermoplastics termoformados ]
Ultrasonic Cleaners
ULTRASONIC CLEANER ( Ecco )
- Available in 3 sizes: .7Liters , 1.4Liters, and 3.5Liters
- Heater included
- Stainless Steel
- Digital control
- 50Watts consumption
Price
+
100513
Code
ECCO - Ultrasonic Cleaner 0.7Lts 110V
Name
US$ 135.00
+Info
100596
US$ 178.00
+Info
101474
US$ 313.00
+Info
Vacuum Forming Thermoplas.
BLEACHING LAMINATE ( Keystone )
- The Bleaching of Teeth Using a Cabamide Peroxide and Bleaching Tray.
- Has a Foam Liner To Absorb Bleach.
- .020in Thickness
- Packages of 50 Sheets
Code
034-9505780
248
Name
KEYSTONE - Bleaching Laminates 50pk
Price
+
US$ 53.55
+Info
21/05/2010 / 1284
COPING MATERIAL ( Keystone )
- Three Thicknesses : 0.20in .030in .040in
- Excellent for Temporary Bridges
- Pacakages of 50 or 625 Sheets
- 5 x 5 inches
- Get Good Definition
Price
+
101160
Code
KEYSTONE - Coping Material-.030in- 50pk
Name
US$ 11.21
+Info
700017
US$ 148.17
+Info
700015
US$ 15.62
+Info
700012
US$ 110.56
+Info
157018
US$ 88.20
+Info
157017
KEYSTONE - Coping Material-.020in - 50 pk
US$ 10.77
+Info
DUAL LAMINATES ( Keystone )
- The Pro-form Dual Laminate Is A Unique Combination Of Two Materials Formed Into A Single Laminated Sheet
- It Was Made Especially For Use In Bruxing Cases. The Soft Liner Assures The Patient Comfort and The Hard
Surface Assures Long Lasting Wear.
- Also Acrylic Will Bond To The Hard Surface To Allow The Dental Technican To Modify The Occlusal Surface.
- Available in 3 Different Thickness - 12 Laminate Sheets Per Pack
Price
+
113005
Code
KEYSTONE - Dual Lam Hard/Soft 12pk 2mm
Name
US$ 44.00
+Info
112003
KEYSTONE - Dual Lamin Soft/Soft 12pk 3mm
US$ 48.00
+Info
113003
US$ 48.00
+Info
113004
US$ 52.00
+Info
MOUTHGUARD ( Keystone )
- Soft, For Energy Absorption
- Mouthguards & Niteguards
- 5 x 5 inch Sheets .160 Thick
- Packages of 25 or 300 Sheets
Price
+
101162
Code
KEYSTONE - Mouthguard Blue- .160in 25pk
US$ 25.20
+Info
101163
KEYSTONE - Mouthguard Green- .160in 25pk
US$ 25.20
+Info
101165
KEYSTONE - Mouthguard Orange- .160in 25pk
US$ 25.20
+Info
101161
KEYSTONE - Mouthguard Red- .160in 25pk
US$ 25.20
+Info
101166
KEYSTONE - Mouthguard White- .160in 25pk
US$ 25.20
+Info
101164
KEYSTONE - Mouthguard Yellow- .160in 25pk
US$ 25.20
+Info
7000654
KEYSTONE - Mouthguard Clear-.160in 25pk
US$ 25.20
+Info
7000625
KEYSTONE - Mouthguard Blue- .160in 300pk
US$ 223.95
+Info
7000626
KEYSTONE - Mouthguard Green- .160in 300pk
US$ 223.95
+Info
7000629
KEYSTONE - Mouthguard Orange-.160in 300pk
US$ 223.95
+Info
7000627
KEYSTONE - Mouthguard Red- .160in 300pk
US$ 223.95
+Info
7000632
KEYSTONE - Mouthguard White-.160in 300pk
US$ 223.95
+Info
21/05/2010 / 1284
Name
249
7000628
KEYSTONE - Mouthguard Yellow-.160in 300pk
US$ 223.95
+Info
7000656
KEYSTONE - Mouthguard Clear- .160in 300pk
US$ 223.95
+Info
700063
KEYSTONE - Mouthguard Black-.160in 300pk
US$ 223.95
+Info
959766
KEYSTONE - Mouthguard Black- .160in 25pk
US$ 25.20
+Info
NFC MATERIAL ( Keystone )
- This is a semi flexible acrylic that has been chemically altered to give the final appliances both strength and
semi-flexiblilty.
- This material is excellent for making flexible clasps, sub lingual flange areas, semi-flexible partials and splints. It
can be polished, shaped, relined, & repaired like regular acrylics.
Price
+
9640960
Code
KEYSTONE - NFC Clear Splint Intro Kit
Name
US$ 174.00
+Info
9640950
KEYSTONE - NFC Intro Kit to Partials
US$ 167.56
+Info
9640880
KEYSTONE - Pro-Flex NFC Resin Clear
US$ 138.69
+Info
PRO-FLEX ( Keystone )
An excelent way to make night guards
1. vacuum form a dual mainate into the patients cast
This gives a hard bite plate with a built in soft liner
2. Modify the occlusal surface by adding the semi-flexible Pro-flex NFC acrylic resin
3.Final result is a hard bite plate modified to the patients needs that is slightly flexible with a soft inner
liner for patient comfort
- Two great products combined into one terrific final appliance
Price
+
9641200
Code
KEYSTONE - Pro-Flex .080 Strengthener 25E
Name
US$ 37.58
+Info
801100
KEYSTONE - Pro-Flex .100 Strengthener 25E
US$ 37.58
+Info
9603580
KEYSTONE - Pro-Flex Dual Laminate .120in
US$ 67.48
+Info
KEYSTONE -035-P360-001 Proform Accessories Utility Sc
US$ 16.00
- Excellent for bulk trimmimg of thermoplastics, especially mouthguards.
- Easy grid handles, stainless steel construction and very handy for variety of applications.
- Keystone # 9139720
RETAINER MATERIAL ( Keystone )
- Stiff Clear Material
- Acrylic Sticks to Material
- 5 x 5 Sheets
- Invisible Orthodontic Retainer
250
21/05/2010 / 1284
Code
Name
Price
+
US$ 34.52
+Info
KEYSTONE - Retain Mat.SClear-.030in 50pk
US$ 61.86
+Info
KEYSTONE - Retain Mat.SClear-.030in 625pk
US$ 697.78
+Info
700107
KEYSTONE - Retainer Material - .030in-625
US$ 195.82
+Info
700105
KEYSTONE - Retainer Material-.030in -50pk
US$ 16.00
+Info
101181
KEYSTONE - Retain Mat.SClear -.030in 25pk
101182
101183
SOFT EVA ( Keystone )
- Soft, Clear Material
- Easily Formed and Trimmed
- Custom Fluoride Trays, Model Duplication
- 5 x 5 inches
- Bleaching Trays, Soft Bruxing
- Packages of 10, 25, or 300 Sheets
Code
Name
103921
KEYSTONE - Soft Eva .040 in -1mm 10pk
Price
+
US$ 10.00
+Info
100613
KEYSTONE - Soft Eva .040in - .040in 25pk
US$ 12.85
+Info
034-1570182
KEYSTONE - Soft Eva .040 in -1mm 300pk
US$ 117.97
+Info
103922
KEYSTONE - Soft Eva.060 in - 1.5mm 10pk
US$ 10.00
+Info
101158
KEYSTONE - Soft Eva .060in25pk
US$ 12.47
+Info
KEYSTONE - Soft Eva.060 in - 1.5mm 300pk
US$ 142.35
+Info
103923
KEYSTONE - Soft Eva .080 in - 2mm 10pk
US$ 10.00
+Info
9597150
KEYSTONE - Soft Eva .080in 25pk
US$ 19.12
+Info
KEYSTONE - Soft Eva .080 in - 2mm 300pk
US$ 165.15
+Info
9611240
KEYSTONE - Soft Eva .120in 25pk
US$ 24.30
+Info
101159
KEYSTONE - Soft Eva .120in 3mm 300pk
US$ 199.95
+Info
034-1570184
034-1570186
SPLINT MATERIAL ( Keystone )
- Stiff, Clear Material
- Acrylic Sticks To Material
- 5 x 5inch Sheets
- For Hard splints, Surgical Trays , Orthodontic Retainers and More!
Price
+
101184
Code
KEYSTONE - Splint Material -.020in 50pk
US$ 13.10
+Info
101157
US$ 130.97
+Info
101156
US$ 18.00
+Info
961488
US$ 202.48
+Info
961478
US$ 23.22
+Info
700037
KEYSTONE - Splint Material - .060in 625pk
US$ 261.76
+Info
961479
US$ 30.00
+Info
700041
US$ 316.95
+Info
961482
KEYSTONE - Splint Material .100in 50pk
US$ 30.99
+Info
700047
US$ 368.04
+Info
103924
US$ 10.00
+Info
103925
KEYSTONE - Splint Material - .060in 10pk
US$ 10.00
+Info
21/05/2010 / 1284
Name
251
103926
US$ 12.00
+Info
103927
US$ 12.00
+Info
103928
US$ 10.00
+Info
THERMOPLASTIC ACCESSORIES ( Keystone )
- High Heat Resistant Compund
- Ideal For Blocking out Undercuts
- Will Not Stick to Models, Plastics Vacuum Units
- Resuable
- 3 oz.
Code
034-1570210
Name
KEYSTONE - Block Out - 3 oz.
Price
+
US$ 12.50
+Info
TRAY MATERIAL ( Keystone )
- Two Thickness: .125, .150
- 5 x 5 inches
- Pure High impact Styrene
- Custom Impression Trays
- Spacer Foam Included
Price
+
157010
Code
KEYSTONE - Tray Material - .150in 625pk
Name
US$ 395.89
+Info
157008
KEYSTONE - Tray Material .125in 625pk
US$ 316.63
+Info
YOUTH MOUTHGUARD ( Keystone )
- Great For Little Kids and Sports
- 5 x 5 inch Sheets .120 Thick
- Soft Energy Absorption
Price
+
101174
Code
KEYSTONE - Youth Mouthguard -Black-25pk
Name
US$ 25.20
+Info
101171
KEYSTONE - Youth Mouthguard Blue - 25pk
US$ 25.20
+Info
101169
KEYSTONE - Youth Mouthguard -Clear- .25pk
US$ 25.20
+Info
101172
KEYSTONE - Youth Mouthguard -Green-25pk
US$ 25.20
+Info
101170
KEYSTONE - Youth Mouthguard -Red-25pk
US$ 25.20
+Info
101173
KEYSTONE - Youth Mouthguard -Yellow-25pk
US$ 25.20
+Info
157088
KEYSTONE - Youth Mouthguard -Clear-300pk
US$ 205.95
+Info
700528
KEYSTONE - Youth Mouthguard-Black -300pk
US$ 205.95
+Info
700531
KEYSTONE - Youth Mouthguard- Red - 300pkg
US$ 205.95
+Info
700538
KEYSTONE - Youth Mouthguard-Yellow -300pk
US$ 205.95
+Info
700539
KEYSTONE - Youth Mouthguard - Green-300pk
US$ 205.95
+Info
700527
KEYSTONE - Youth Mouthguard- Blue 300pk
US$ 205.95
+Info
Soft Eva
252
21/05/2010 / 1284
Soft Eva
GUARD EVA(Ecco)
- CLEAR Soft clear material
- Easily formed and trimmed
- Custom fluoride trays
- Model duplication
- Bleaching trays
- Soft bruxing - [same keystone orignal formula]
- Blando - [ thermoplastics termoformados ]
- Shipping info 12x12x4 12lbs or 5kg
Price
+
102511
Code
ECCO - ECCO-Guard Eva .040in 300pk
Name
US$ 115.00
+Info
102512
US$ 140.50
+Info
102513
US$ 162.54
+Info
102514
ECCO - ECCO-Guard Eva.120in 3mm 300pk
US$ 196.18
+Info
Vacuum Mixers
Manual Vacuum Mixers
MANUAL VACUUM MIXER ( Keystone )
- Hand mixing unit
- No Excess Spatulation
- Quick Disconnect for Vacuum Inlet
- Extra "O" Rings on Disconnect For Better Maintenance Of Vacuum
- Three "O" Rings On Spatulator Shaft Thus Preventing Vacuum Loss & Investment Creep Along Shaft
- Easily Maintaned
- Thick, Hard Rubber Construction: Will Not Collapse
- Includes Quick Disconnect and Tubing
Price
+
034-1625000
Code
KEYSTONE - Vac Mix Bowl Sm Comp 3-1/2in
Name
US$ 88.20
+Info
034-1625100
KEYSTONE - Vac Mix Bowl Med Comp 4-3/4in
US$ 88.20
+Info
034-1625200
KEYSTONE - Vac Mix Bowl Lge Comp 5-1/2in
US$ 88.20
+Info
Vacuum Mixers
Vacuum Mixers Units
WORLDENT- 101666 Spin Cycle Vacuum Mixer
US$ 1,045.00
SPIN CYCLE VACUUM MIXER
Special Bonus
- Hands-free operation, bowls are automatically held in place.
- Built-in automatic on/off programmable digital timer with audio tone
- Large built-in vibration table with 6 levels of variable speed control
- Free standing design for use on a table top or wall mounted
- Two mixing bowls with stainless steel spatulas (500 ml & 900 ml)
Features
- On-board double filter safety system is modular and washable
- Produces ultra-smooth creamy bubble-free mixer for all investments & gypsums
- Three Dimensional Mixing - Horizonal + Vertical + Diagonal (all done simultaneously)
- Built-in pressure regulator automatically converts only 50-55 psi to optimum vaccum levels
- Optional 200 ml bowl with stainless steel spatula available
- Stainless Steel Vaccum mixer
- CE Certified
- Overflow protection
21/05/2010 / 1284
253
Vacuum Mixers
Vacuum Mixers Units
- Eliminates 100 % of all maintenace
- Shipping Info 25x14x13 42Lbs
WORLDENT- 100498 Spin Cycle Vacuum Mixer Slim L
US$ 778.00
SPIN CYCLE VACUUM MIXER SLIM LINE
Special Bonus
- Hands-free operation, bowls are automatically held in place
- Built-in automatic on/off programmable digital timer with audio tone
- Built-in stainless steel mounting bracket with rubber cushion wall silencers
- Includes 500 ml mixing bowl with max fill line and stainless steel spatula
- On-board double filter safety system is modular and washable
Features
- Space saving sleek slim-line ergonomic design.
- Produces ultra-smooth creamy bubble-free mixes for all investments & gypsums
- Three Dimensional Mixing - Horizontal + Verical + Diagonal (all done simultaneously)
- Built-in pressure regulator automatically converts only 50-55 psi to optimum vaccum levels
- Optional 200 ml and 900 ml mixing bowls with stainless steel spatulas available
- Stainless Steel Vaccum mixer
- Overflow protection
- Eliminates 100 % of all maintenace
- CE Certified
- Ship Info 16x14x15 25Lbs
RENFERT - 100886 Twister Mixer EA
US$ 1,499.00
- Article number - 18201000The compact Twister vacuum mixer can be employed for all conventional
casting and modelling materials used in dental technology.
- All mixing parameters are quickly and easily input.
- The high performance motor and high quality vacuum pump guarantee homogenous and bubble-free
mixing results for dental plasters, investments, and silicons.
- Parameters
- Vacuum display
- Motor speed control
- Mixing time control
- Mixing motor (100 - 400 rpm) high-performance vacuum pump
- Mixing bowls in 5 sizes
- The standard unit is designed for wall mounting, while an optionally available stand turns the unit into a
benchtop device.
- ALSO Available 220 Volts
Vacuum Mixers
Vacuum mixers Accesories
WORLDENT - 106804 Bowl only 200 ml
US$ 40.25
Spin Cycle bowl only 200 ml - replacement part - (ram)
US$ 40.25
US$ 40.25
WORLDENT - 106807 Spatula only 200 ml
US$ 90.65
Spin Cycle Spatula only 200 ml - replacement part - (ram)
254
21/05/2010 / 1284
Vacuum Mixers
US$ 90.65
US$ 90.65
Vacuum formers
Vacuum forming Units
ECCO VACUUM FORMING ( Ecco )
- Vacuum Forming machine 220volts or 110volts.
- For all thermoplastic laminates.
- Square and round sheets suitable.
- Uniform heating distribution - 2 Year Warranty [ termoformadora thermoformer vacuumforming ]
Price
+
102348
Code
ECCO - ECCO Vacuum Forming mach 110v
Name
US$ 210.00
+Info
102510
ECCO - ECCO Vacuum Forming mach 220v
US$ 210.00
+Info
KEYSTONE - 100872 Pressure Dome 5x 5plastics
US$ 118.76
Accesory for vaccum forming machine
- Adds new extra pressure to the vaccum. Fits inany vacuum unit that makes 5x5 plastics - Works with every compressor
- Pressure needed : Weight1lb - Package size 7 x7 x7 inches - [ K#9594050 ]
KEYSTONE - 101209 Pro-Form Vac Form Dual 110V
US$ 349.00
- 5 year parts and labor [K#9594130 ]
- Heavy duty vacuum especially designed for dental industry all aluminum.
- Two post sliding frame to assure ease in operation
- vacuum motor strategically located below a perforated plate to create direct downward suction
- A heavy duty two chambered motor for greater suction
- Spring loaded frame to accomodate a variety of materials
Shipping info
- Weight:21lbs
- Dimensions: 13in x 9in x 9in
- Made in USA
21/05/2010 / 1284
255
Vacuum formers
KEYSTONE - 101208 Pro-Form Vac Form Single 110V
US$ 269.00
- 5 year parts and labor -[K# 9594470 ] 16lb
- Vacuum forming is economical unit that is excellent for fabricating most thermoplastic appliances - hexagonal
post that keeps sliding frame from rotating (all aluminumconstruction) uniform heating distribution.
- Made in USA
KEYSTONE-034-7000470 Proline Air Vac 2000- 110V
US$ 360.85
- 5 year warranty on parts and labor [ K# 7000470 ]
- Vacuum forming machine
- No motor means unit is very compact andvery quiet
- Works on all types of plastics and appliances
- Very economical
- Can be used to layer appliances
- unitutilizes the labs internal air compressor to provide maximum amount of air pressure
- Made in USA
KEYSTONE-034-7000331 The Machine III- 220 Volt
US$ 290.00
The Machine-III- 220 Volt vacuum former machine - [ vacuum forming ] The Machine III has set the
standardby which all vacuum forming machinesAre measured...
- Is ideal for every need in the dental office and also the rigorousdemands of a commercial laboratory
setting.
Strongest Motor...
Is the only two chamber vacuum forming machine in its class that produce the greatest amount of
vacuum strength, resulting in appliances, mouthguards, baseplates, trays and stents that have
precise adaptation and perfect accuracy.
Superior Quality...
- Is completely manufactured in the USA from only the finest alloys and materials. Each component
is individually inspected and must satisfy strict quality control guidelines.
- 5 year warranty
- UL, cUL, CE rated
- Heavy duty silicone gaskets
- Simple to operate controls
- Illuminated heat indicator
- Self-adjusting frame hinge
- Rugged custom painted finish
- Oversized housing for stability
- Toll free technical support
- Available in 220v and 110v
KEYSTONE- 034-1560010 Vac Form Machine III 110v
US$ 295.00
The Machine III has set the standardby which all vacuum forming machinesAre measured...
- Is ideal for every need in the dental office and also the rigorousdemands of a commercial laboratory setting.
Strongest Motor...
Is the only two chamber vacuum forming machine in its class that produce the greatest amount of vacuum
strength, resulting in appliances, mouthguards, baseplates, trays and stents that have precise adaptation and
perfect accuracy.
Superior Quality...
- Is completely manufactured in the USA from only the finest alloys and materials. Each component is
individually inspected and must satisfy strict quality control guidelines.
- 5 year warranty
- UL, cUL, CE rated
- Heavy duty silicone gaskets
- Simple to operate controls
256
21/05/2010 / 1284
Vacuum formers
- Illuminated heat indicator
- Self-adjusting frame hinge
- Rugged custom painted finish
- Oversized housing for stability
- Toll free technical support
- Available in 220v and 110v
VH-100882 Vac Form w/motor 110-220V
US$ 333.00
VH- Vacuum Forming with Motor
- No need compressor
- Uses round and square plaques.
- 5 x 5inches
- Used for copies of models in plaster in diverse works
- Aluminum Structure [termoformadora thermoformer vacuumforming. Dimensions 360 x 200x 350 mm - 14 x 8
x 14 in -Motor 900watts - 110 or 220 volts
VH - 100883 Vac Form- no motor 110volts
US$ 228.00
VH - Vacuum Forming Machine
Form- no motor 110-220VVHVacuum Forming Venturi [neumatic] - Just conect to a compressor - No motor needed
- Used for copies of models in plaster in diverse works
- Aluminum Structure
- Uses round and cquare plaques
- Uses standard 5x 5 inches plaques /sheets
Dimensions 360 x 200x 250 mm - 14 x 8 x 10 in 2 years warranty
Vibrators
Large Vibrators
ECCO - 101914 Vibrator Big 270x 220mm 3 spd
US$ 199.00
BIG-Vibrator 270x 220mm 3 speeds - 2 frequencies - 300wats power - datachable top for easy cleaning [M# 901 ] vibrador Shipping Dimensons: 11 x 6 x 14 Weight: 15lbs
ECCO - 101915 Vibrator Med 150x 20mm variab
US$ 95.00
MED-Vibrator Square 150x 20mm variable Speed - Heavy Dutty - - [M# 902 ] vibrador
Vibrators
Small Vibrators
21/05/2010 / 1284
257
Vibrators
Small Vibrators
ECCO - 101930 ECCO Vibrator Round Top 110V
US$ 65.00
ECCO Vibrator Round Top -Heavy Duty - 4.25inches - 110V Quiet motor - Variable speed - Compact Design
Shipping Dimensions: 7x6x5in - Weight 6lb -A heavy-duty vibrator powerful enough to be used in all
typesof dental laboratories but small enough to work great in a dentaloffice. Heavy-duty steel spring
construction provides maximumvibration. The unit has a weighted aluminum base for stability,a
four-inch diameter rubber top, three-speed control switch andrubber suction feet to hold the unit in
place.
Wax pots & Dipping
Wax pot
ECCO - 102470 Digital Dipping Pot
US$ 110.00
- Desgined to melt all varitey of waxs
- Can heat quickly and keepin its liquid condition without any change in physical properties
- Excellent heat conductivity
- lasting service life and easy to use
- Built in memory chip to memorize previous workingtemperatures
- operates in celcius and fahrenheit - Automatic heater-on indicator LED
- Buzzerswhen pressing a pad key
- Automatically calibrates voltages -110-220volt -
ECCO - 101900 Digital Dipping Pot 110V
US$ 141.00
- Desgined to melt a varitey of waxs
- Can heat quickly and keep in its liquidcondition without any change in physical properties
- Excellent heat conductivity - lasting servicelife and easy to use
- Built in memory chip to memorize previous working temperatures -operates in celcius and fahrenheit Automatic heater-on indicator LED.
- Buzzers when pressinga pad key - Automatically calibrates voltages -
ECCO -205-47715 Wax Pot Digital 3 boxes110V
US$ 72.00
ECCO Electric Wax Pots Digital Wax Pot 3 boxes - 1 temp (L#CA1410 for 110volts ) (L#1412 for 220volts ) Hottys
Waxers Electrical
Accesories for electric waxers
258
21/05/2010 / 1284
Waxers Electrical
ECCO - 101787 Digital Wax Carver - Pen Only
US$ 45.72
Digital Wax Carver - Pen Only - each sold separately -
ECCO - 101786 Digital Wax Carver Extra Tips
US$ 9.22
Digital Wax Carver Extra Tips - each sold separately -
RENFERT - 103879 Waxlectric Tip Probe Med
US$ 34.19
Renfert Waxlectric Tip Probe Med - Replacement tip for waxer unit - [R# 21550102 ]
Waxers Electrical
Waxer Units
ECCO - 101429 ECCO-Waxer Digital Dual
-bi-vo
US$ 178.00
ECCO Digital Electric Dual Waxer 110volts
- 2 Pens
- 6 tips
- -Excellent Heat Conductivity
- Long lasting service life
- easy to use
- easy temp control accurate temp maintenance
- bulit in digital cpu
- C/F change with the push of a button
- 2-line circuit for simultaneous work of the 2 pens at diferent temperature
- silicone holder handle
- Comfortable use wax spatula duowaxer - comparable with Wip mix version
Warranty 1 year
ECCO - 102406 ECCO-Waxer-II Digital Dual Vol
US$ 178.00
ECCO WAXER II DIGITAL DUAL VOLTAGE
- Waxer
- 2 Pens
- 6 Tips
- Bi-voltage
- Excellent Heat Conductivity
- Long Lasting Life
- Easy to Use
- Easy Temp Control
- Accurate Temp Maintenance
- Built in digital CPU
- C/F Change with the Push Of a Button
- 2 Line Circuit for Simultaneous Work
- Silicone Holder Handle
- Comforable use Wax Spatula
21/05/2010 / 1284
259
Waxes All types
Waxes All types
ADHESIVE WAX ( Ecco )
- Adhesive Coated Pressure Sensitive Wax
- Green smooth no lines
- Flexible 4" x 4" wax sheets
- Which are coated onone side with a pressure sensitive adhesive
- 32 sheets per box
Price
+
100491
Code
ECCO - ECCO 24ga ( 0.50mm ) - 4x4in wax sheets 32box Adhesive Coated Pressure Sensitiv...
Name
US$ 15.00
+Info
103541
ECCO - ECCO 26ga ( 0.50mm ) - 4x4in wax sheets 32box Adhesive Coated Pressure Sensitiv...
US$ 15.00
+Info
ADHESIVE WAX ( Keystone )
- Adhesive Coated Pressure Sensitive Wax
- Flexible 4" x 4" wax sheets
- Which are coated onone side with a pressure sensitive adhesive
- 32 sheets per box
Price
+
034-1880060
Code
KEYSTONE - 30ga ( 0.25mm ) - 4x4in wax sheets 32box Adhesive Coated Pressure Sensitive Wa...
Name
US$ 20.60
+Info
034-1880050
US$ 20.60
+Info
034-1880040
KEYSTONE - 26ga ( 0.4mm ) - 4x4in wax sheets 32box Adhesive Coated Pressure Sensitive Wax...
US$ 20.60
+Info
034-1880030
US$ 20.60
+Info
034-1880020
US$ 20.60
+Info
034-1880010
US$ 20.60
+Info
BOXING WAX
- Soft tacky red wax for boxing impression
Price
+
034-1880260
Code
KEYSTONE - Boxing Wax Regular 5lb
Name
US$ 43.75
+Info
034-1880262
KEYSTONE - Boxing Wax Regular 1lb
US$ 14.35
+Info
034-1880264
KEYSTONE - Boxing Wax- X-Thin 1lb
US$ 14.35
+Info
Waxes All types
Adapta system
BEGO-20500 Adapta Deep-Drawing-System
US$ 388.89
- 1 Pote De Masilla Adapta - 1 Porta Obleas - 100 Obleas Adapta 0.6 mm EnDispensador- 200 Obleas Mantenedoras De
Espacio 0.1mm En Dispensador - 100 Obleas Adapta 0.6 mmEmpaque Sustitucion - 1 Paquete Repuesto Masilla Adapt
Waxes All types
Base Plate wax
260
21/05/2010 / 1284
Waxes All types
Base Plate wax
CFS - 251106 CFS Base Plate Wax 2.5 lb
US$ 23.80
CFS Base Plate Wax 2.5lb - This wax is used for multi-purposes such as set-ups- basic waxinf and stay plates [C# 251106]
ECCO- 102339 Pink Base Plate Wax 5lb
US$ 32.00
Pink Base Plate- Wax 5lb - All season - [Cera Para Base Rosada 5Lb]
KEYSTONE-034-1880170 Pink Base Plate Wax 5lb
US$ 52.00
Pink Base Plate- Wax 5lb Cera Para Base Rosada 5Lb. --- [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is
KEYSTONE-034-1880175 Red Base Plate Wax 5lb
US$ 49.23
Red Base Plate- Wax 5lb [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized business in Dental lab
Waxes All types
Bite and Stick Blocks
KEYSTONE-034-1880240 Pink Bite Blocks 10mm 100pk
US$ 26.55
Bite Blocks- Pink - 3/8in (10mm) - 100pk - [K# 1880240 ] Bloques rosados de la mordedura de la cera - Medium Soft - Wax - Bite
Rims - Weight 4lbs -
KEYSTONE-034-1880250 Red Bite Sticks Wax 100pk
US$ 20.38
Wax Bite Sticks - Red - 100pk - - Rodete de mordida rojos de cera - [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental
Waxes All types
Casting wax sheets
CASTING WAX SHEETS ( Keystone )
Avalibale in :
GREEN and PINK
6 Different thickness , from 20 to 30 Ga
1 Lb packaged
CASTING WAX SHEETS GREEN
Price
+
034-1880280
Code
KEYSTONE - Casting Wax Green 20ga 1lb
US$ 21.85
+Info
034-1880300
US$ 26.24
+Info
034-1880320
US$ 26.24
+Info
034-1880340
US$ 27.91
+Info
21/05/2010 / 1284
Name
261
Waxes All types
Casting wax sheets
034-1880350
US$ 27.91
+Info
034-1880380
US$ 27.91
+Info
CASTING WAX SHEETS PINK
Price
+
034-1880270
Code
KEYSTONE - Casting Wax Pink 20ga 1lb
Name
US$ 21.85
+Info
034-1880290
US$ 26.24
+Info
034-1880310
US$ 26.24
+Info
034-1880330
US$ 27.91
+Info
034-1880360
US$ 27.91
+Info
034-1880370
US$ 27.91
+Info
Waxes All types
Cervical wax
CERVICAL WAX ( KEYSTONE )
YETI - 102009 Iq 4 Black Cylinder Cerv. Wax
US$ 23.99
Yeti Iq 4 Black Cylinder Cervical Wax
YETI - 34-1860034 Red Cervical Wax 70gr
US$ 29.40
Yeti Red Cervical Wax- 70gr Smooth flowing wax
262
21/05/2010 / 1284
Waxes All types
Corning Wax
Waxes All types
Corning Wax
CORNING - 106839 All season wax Pink/ Red 1lb
US$ 10.85
All season wax Pink/ Red 5lb box - Guaranteed to wash out clean. (ram)
CORNING - 106840 All season wax Pink/ Red 5lb
US$ 38.55
All season wax Pink/ Red 5lb box - Guaranteed to wash out clean. (ram)
CORNING - 106838 Base plate wax med soft 5lb
US$ 40.50
Base Plate wax Medium soft 5lb box - Ideal for waxing up. Guaranteed to wash out clean (ram)
CORNING - 106844 Bite Blocks Pink 3/8x100
US$ 23.15
Bite Blocks Pink 3/8x100 - No Waste - Ready to use - Pre Formed - U shaped without heating (ram)
CORNING - 106867 Carving Wax L.Blue
US$ 14.40
Carving Wax L.Blue 45gr tin (ram)
CORNING - 106868 Carving Wax L.Green
US$ 14.40
Carving Wax L.Green 45 gr tin (ram)
CORNING - 106866 Carving Wax Op. Beige
US$ 14.40
Carving Wax Op. Beige 4gm tin (ram)
CORNING - 106849 Casting Wax Pink - Green
US$ 20.25
Casting Wax Pink or Green 20 gauge 1 box - Single Gauge - Smooth-Flexible sheets - Designing Patterns Non-Shrinking - Sheet - 2 7/8in x 5
7/8in Lg Bx (ram)
US$ 23.40
Casting Wax Pink or Green 22 or 24 gauge 1 box - Single Gauge - Smooth-Flexible sheets - Designing Patterns Non-Shrinking - Sheet - 2 7/8in x
5 7/8in Lg Bx (ram)
US$ 25.35
Casting Wax Pink or Green 26 or 28 or 30 gauge 1 box - Single Gauge - Smooth-Flexible sheets - Designing Patterns Non-Shrinking - Sheet - 2
7/8in x 5 7/8in Lg Bx (ram)
CORNING WAX ( Keystone )
Price
+
034-1880490
Code
CORNING - Green 1Lb Inlay Wax #4 Chunk
US$ 45.00
+Info
034-1880480
CORNING - Maves 1lb. Inlay Wax #2 Chunk
US$ 34.38
+Info
034-1880410
CORNING - Hard Blue Inlay Wax Chunks- 1lb.
US$ 19.38
+Info
034-1880420
CORNING - Hard Green Inlay Wax Chunks- 1lb.
US$ 19.38
+Info
21/05/2010 / 1284
Name
263
Waxes All types
Corning Wax
034-1880450
CORNING - Inlay Wax Chunks- White 1lb.
US$ 19.38
+Info
034-1880400
CORNING - Regular Blue Inlay Wax Chunks- 1lb.
US$ 19.38
+Info
034-1880390
CORNING - Regular Green Inlay Wax Chunks- 1lb.
US$ 19.38
+Info
034-1880440
CORNING - Spec. Hard Blue Inlay Wax Chunks- 1lb.
US$ 19.38
+Info
034-1880430
CORNING - Spec. Hard Green Inlay Wax Chunks- 1lb.
US$ 19.38
+Info
CORNING - 106863 Inlay Wax Extra White
US$ 23.55
Inlay Wax Extra White Lumps Excellent Carve-ability (ram)
US$ 45.55
Inlay Wax Extra White Sticks: 1/4 round x 4 1/2 in. Excellent Carve-ability (ram)
US$ 10.50
Inlay Wax Extra White Tins Excellent Carve-ability (ram)
CORNING - 106855 Inlay Wax Hard Green/Blue
US$ 19.55
Inlay Wax Hard Green/Blue Lumbs 1lb (ram)
CORNING - 106858 Inlay Wax Hard Green/Blue
US$ 10.80
Inlay Wax Hard Green/Blue Tins 2 oz. (ram)
CORNING - 106857 Inlay Wax Hard Green/Blue 1lb
US$ 43.50
Inlay Wax Hard Green/Blue 1lb - Sticks: 1/4 round x 4 1/2 in. (ram)
CORNING - 106859 Inlay Wax Ivory/Red
US$ 23.55
Inlay Wax Ivory/Red Lumps Exelent Carve ability (ram)
US$ 45.55
Inlay Wax Ivory/Red Sticks: 1/4round x 4 1/2 in. Exelent Carve ability (ram)
US$ 10.50
Inlay Wax Ivory/Red tins Exelent Carve ability (ram)
CORNING - 106852 Inlay Wax Reg Green/Blue
US$ 18.25
Inlay Wax Reg Green/Blue Lumps - Superior wax for Build-up - Scientifically prepared with correct - and reliable wax working capabilities (ram)
US$ 41.15
Inlay Wax Reg Green/Blue Sticks: 1/4 round x 4 1/2 in - Superior wax for Build-up - Scientifically prepared with correct - and reliable wax working
capabilities lumps (ram)
US$ 9.80
Inlay Wax Reg Green/Blue Tins - Superior wax for Build-up - Scientifically prepared with correct - and reliable wax working capabilities lumps (ram)
264
21/05/2010 / 1284
Waxes All types
Corning Wax
CORNING - 106870 Margin Wax Dark Red
US$ 14.40
Margin Wax Dark Red 45gm tin (ram)
CORNING - 106872 Milling Wax L.Green
US$ 16.15
Milling Wax L.Green 45gm tin - Excellent scraping characteristics - Rapid hardening after application - Shapes easily (ram)
CORNING - 106869 Occlusal Wax Opa. Gray
US$ 14.40
Occlusal Wax Opa. Gray 45gm tin (ram)
CORNING - 106845 Red Beading Carding Wax
US$ 50.10
Red Beading Carding Wax 5lb box - Modeling- all-purpose - Ease of Use - Pin setting in sleeve - Size 1/4in X 1/8in X 12in (ram)
CORNING - 106848 Strip Wax/ Boxing 5lb
US$ 42.40
Strip Wax/ Boxing 5lb - Size 1 1/2in x 12in Reg Gauge .070 - Ideal For Boxing Models (ram)
CORNING - 106871 Undercut Wax Pink/White
US$ 16.15
Undercut Wax Pink/White 45mg tin (ram)
CORNING - 106846 Utility Wax Red or White (L)
US$ 40.50
Utility Wax Red or White 1 box LARGE - Square & Round Rope - Handy- soft- Multi-purpose - Adhesive properties- excellent for sprue/sprue
base adhesion - Size 3/16in x 12in (ram)
CORNING - 106847 Utility Wax Red or White (S)
US$ 8.80
Utility Wax Red or White 1 box SMALL - Square & Round Rope - Handy- soft- Multi-purpose - Adhesive properties- excellent for sprue/sprue base
adhesion - Size 3/16in x 12in (ram)
CORNING - 106852 Wax Bite Sticks Pink
US$ 22.20
Wax Bite Sticks Pink 1 box (ram)
CORNING - 106841 Yellow Bite Wax 1lb
US$ 10.80
Yellow Bite Wax 1lb - Flexible-Occlusal transfers (ram)
CORNING - 106842 Yellow Bite Wax 5lb
US$ 42.40
Yellow Bite Wax 5lb - Flexible-Occlusal transfers (ram)
CORNING - 106843 Yellow Bite wax U-Shape
US$ 18.90
Yellow Bite wax U-Shape Small 56 - Flexible-Occlusal transfers (ram)
Waxes All types
Crown & Bridge Pref. waxes
21/05/2010 / 1284
265
Waxes All types
ECCO -100760 Wax Proformas S-M-L 180pk
US$ 54.00
A set of pontics for modelling anterior and posterior bridges for veneer technique with acrylic or porcelain.
- Tooth shapes are propor-tionally reduced.
- Standard sizes are com-patible for the majority of applications time savings!
- ECCO pontics can also be individually reduced or waxed-up.
- 6 standard wax blocks for bridge construction in each quadrant.
- Anatomical shaping of tooth nucleus.
- The lingual positioning of the anchor points allows vestibular separation.
- Optimum depth of occlusal surfaces allowing anatomical modelling.
- No delay during lifting due to high stability.
Waxes All types
Dipping Waxes
DIPPING WAX (Keystone)
Price
+
034-1890030
Code
KEYSTONE - Red Dipping Wax 10oz
Name
US$ 27.27
+Info
034-1890040
KEYSTONE - Yellow Dipping Wax 10oz
US$ 27.27
+Info
034-1890050
KEYSTONE - Green Dipping Wax 10oz
US$ 27.27
+Info
ECCO - 101673 Dipping Wax Green 7.5oz 225gr
US$ 12.00
ECCO Dipping 7.5oz 225gr Wax Green-Verde Cera Copping
ECCO - 101672 Dipping Wax Yellow 7.5oz 225gr
US$ 12.00
ECCO Dipping Wax 7.5oz 225gr Yellow Amarilla Cera Copping
YETI - 34-1860104 Duo Dip Wax 80gr
US$ 26.00
Yeti Duo Dip - Dipping Orange/Yellow Wax
- 80gr Mixture of Elasto Dip and Preci Dip
- Precision with elasticity -Granulated makes dispensing easier
BEGO - 105060 Magic Dipping Wax 4oz
US$ 35.00
- Dipping wax, hard-elastic, with increased elastic recovery and firmness so that the coping remains stable, even in critical
situations.
- Waxes only contain organic constituents.Working temperatures: green/yellow 70-75 C
Waxes All types
Full ceramic injection Wax
266
21/05/2010 / 1284
Waxes All types
YETI -34-1860245 Beige Iq Pearl Wax 80gr
US$ 25.87
Yeti Beige Iq Pearl Wax 80gr - Tin Sculpturing Waz pearls [tooth color carving wax ]
KEYSTONE- 34-1860033 Creation Set Complete 12 color
US$ 132.30
Creation Set Complete 12 differet color
- Aloow modelations like porcelain layer technique.Contains Grey transp-white transp-enam blue
transp-yellow- orange- dentin- light dentincervical- brown - light red brown -dark brown.
- [8grs refills availabl [cera tallado esculpidoporcelana injectada pressed porcelain ] [ HS#2426048 ] [
Keystone Abrasives - Keystone DentalTools ][ Us Dental Depot is specialized business in Dental lab
equipment & Dental PorcelainFurnaces ]
YETI - 34-1860244 Grey Iq Pearl Wax 80gr
US$ 25.87
Yeti Grey Iq Pearl Wax 80gr
YETI -34-1860061 Yeti VKS Beige 45gr Tin Sculpt
US$ 23.40
Yeti VKS Beige transparent 60gr Tin Sculpturing Wax- Three times filtered for full Ceramic [injection systems
-pressable - porcelain ] [tooth color carving wax [HS#2421196 ]
Waxes All types
Inlay Casting - Carving Waxes
ECCO - 101788 Green Inlay Wax 1 lb
US$ 14.72
Green Inlay Wax - 1lb
- Favored by dental labs for bridgework.
- Execptional durability - provide cast inextremely thin sections and resists deformation from repeated handling
easily carved out and burnoutcleanly without residue.
KEYSTONE-034-1880386 Hard Blue Inlay Chunk 1lb
US$ 16.00
Hard Blue Inlay Chunk 1lb - Keystone Premium Brand
KEYSTONE-034-1880388 Hard Green Wax Chunks 1lb
US$ 16.00
Hard Green Wax Chunks 1lb - Keystone Premium Brand
KEYSTONE-034-1880386_A Hard White Inlay Chunk 1lb
US$ 16.00
Hard White Inlay Chunk 1lb - Keystone Premium Brand
BEGO - 105059 Magic Carving Wax 2oz
21/05/2010 / 1284
US$ 25.00
267
Waxes All types
BEGO-Magic Carving Wax 2oz - Green/Yellow - (B# 40067 )
YETI - 34-1860122 IQ Blue Cylinder Sc. 45gr
US$ 17.82
Yeti Iq4 Blue Cylinder Sculpturing Wax- 45gr
YETI - 34-1860124 IQ Blue Tin Sc. Wax 45gr
US$ 17.83
Yeti IQ Blue Tin Sculpturing Wax - 45gr - modeling wax modelar -
KEYSTONE-034-1880385 Regular Blue Inlay Chunk 1lb
US$ 16.00
Regular Blue Inlay Chunk 1lb - Keystone Premium Brand
KEYSTONE-034-1880387 Regular Green Inlay Chunk 1lb
US$ 16.00
Regular Green Inlay Chunk 1lb - Keystone Premium Brand
KEYSTONE-034-1880795 Slaycris Wax Green
US$ 14.35
Slaycris Wax Green [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized business in Dental lab
TOWAX - 34-1860017 Thowax Sculp. Wax Blue 70gr
US$ 21.14
Thowax Sculpturing Wax- Blue 70gr
YETI -34-1860245 Yellow Iq Pearl Wax 80gr
US$ 25.87
Yeti Neon Yellow Iq Pearl Wax 80gr
Waxes All types
Lingual wax
CFS - 213106 CFS Lingual Wax 1lb
US$ 30.40
CFS Lingual Wax 1lb - The lingual connector is the exact thickness necessary for clasps- flange and lingual
connector areas [C# 213106]
268
21/05/2010 / 1284
Waxes All types
Margin Wax
Waxes All types
Margin Wax
BEGO - 105058 Margin Wax Medium Blue 2oz
US$ 39.00
BEGO-Margin Wax Medium Blue 2oz - (B# 40049 )
Waxes All types
Mesh green wax
ECCO - 100772 Wax mesh square 10 sheets
US$ 9.00
Wax mesh (square shape) for chrome cobalt frame - 10 sheets [10pcs] [wax preformed patterns clasps cera preformada ganchos para chromo] [
Rejilla de cera ]
Waxes All types
Milling wax
ECCO - 200124 Green Extra Hard Wax 1lb 465gr
US$ 16.00
ECCO Ferris Green Extra Hard Wax 1lb 465gr. Cera Verde Extra Dura para Fresado Duplicado Inyeccion
YETI - 34-1860102 Grey Opaq. Milling W.
60gr
US$ 26.00
Yeti Grey Opaque Milling Wax- 60gr [ cera de tallado fresado ]
BEGO - 105057 Milling Wax Green 3oz.
US$ 36.00
- Milling waxThe formula of BEGO milling has been optimized for preparing with milling instruments.
- The surfaces of the patterns are very smooth with sharp contours.
- Due to its optimal hardness wax chips do not adhere to the pattern and do not smear.
- Grey milling wax contains inorganic constituents.Solidification point approx. 62C
Waxes All types
Palate Wax
21/05/2010 / 1284
269
Waxes All types
Palate Wax
CFS - 212106 CFS Palate Wax 80pcs
US$ 25.00
CFS Palate Wax - 80pcs - ideal thickness for partials [C#212106 ] - preformed palates can save time and
money -
Waxes All types
Preformed Wax Clasps
ECCO - 100764 Ring Straight Clasps 200pk
US$ 15.90
ECCO Ring Straight Clasps
- Wax paterns - 200pk ( 200pk in 10 sheets)
-Ganchos preformadoscera para cromo crhome cobalt.
ECCO - 100739 Roach Wax Molar Lg R&L 200pcs
US$ 15.90
ECCO Wax Molar Large Clasps
- Right & Left - Roach -Wax paterns - 100 right & 100 left ( 200pcs in 10 sheets )
- Ganchos preformados cera para cromo crhome cobalt
Waxes All types
Preformed plastic clasps
NOBILIUM - FR14007 Finishing Bars 12pk
US$ 3.20
FR14007 Finishing bars or finishing lines with retention - 12 patterns per sheet- for constructing full uppers
horseshoes and various other partials- wax performed patterns [wax preformed patterns clasps cera preformada
ganchos para chromo]
NOBILIUM - FR24008 Finishing Bars 12pk
US$ 3.20
FR24008 Finishing bars or finishing lines with retention- 12 patterns per sheet - for constructing full uppers
horseshoes and various other partials- wax performed patterns [wax preformed patterns clasps cera preformada
ganchos para chromo]
270
21/05/2010 / 1284
Waxes All types
NOBILIUM - FB24006 Finishing Bars Large 12pk
US$ 3.20
FB24006 Finishing bars or finishing lines (large) 12 patterns per sheet- wax performed patterns [wax preformed
patterns clasps cera preformada ganchos para chromo]
NOBILIUM - FB14005 Finishing Bars Small 12pk
US$ 3.20
FB14005 Finishing bars or finishing lines (small) 12 patterns per sheet- wax performed patterns [wax preformed
patterns clasps cera preformada ganchos para chromo]
NOBILIUM - LB24010 Lingual bars Heavy-Half-Drop
US$ 3.20
LB24010 Lingual bars (heavy-half-drop) 12 patterns per sheet- wax performed patterns [wax preformed patterns
clasps cera preformada ganchos para chromo]
NOBILIUM - LB14009 Lingual bars Light-Half-Drop
US$ 3.20
LB14009 Lingual bars (light-half-drop) 12 patterns per sheet-wax preformed patterns [wax preformed patterns
NOBILIUM - LR14011 Lingual bars w/ retention
US$ 3.20
LR14011 Lingual bars with retention - 12 patterns per sheet- wax performed patterns [wax preformed patterns
US$ 3.20
LR24012 Lingual bars with retention 12 patterns per sheet- wax performed patterns [wax preformed patterns
US$ 3.20
US$ 3.20
LR44014 Lingual bars with retention 12 patterns per sheet - wax performed patterns [wax preformed patterns
US$ 3.20
LR54015 Lingual bars with retention - 12 patterns per sheet- wax performed patterns [wax preformed patterns
US$ 3.20
NOBILIUM - PB14018 Palatal bars (half-round)
US$ 3.20
PB14018 Palatal bars (half-round) 12 patterns per sheet [PLASTIC] [wax preformed patterns clasps cera
preformada ganchos para chromo]
21/05/2010 / 1284
271
Waxes All types
NOBILIUM - PB24019 Palatal bars (wide-flat)
US$ 3.20
PB24019 Palatal bars (wide-flat) 12 patterns per sheet [PLASTIC] [wax preformed patterns clasps cera
NOBILIUM - PR14022 Palatal bars w/ retention
US$ 3.20
PR14022 Palatal bars with retention - 14 patterns per sheet - long and short bars on same card long bar with
tapered end for unilateral application [PLASTIC] [wax preformed patterns clasps cera preformada ganchos para
chromo]
NOBILIUM - PR24023 Palatal bars w/ retention
US$ 3.20
PR24023 Palatal bars with retention - 14 patterns per sheet - long and short bars on same card long bar with
tapered end for unilateral applicetion [PLASTIC] [wax preformed patterns clasps cera preformada ganchos para
chromo]
NOBILIUM - PD14020 Post dams or utility bars
US$ 3.20
PD14020 Post dams or utility bars - 12 patterns per sheet [PLASTIC] [wax preformed patterns clasps cera
NOBILIUM - PD24021 Post dams or utility bars
US$ 3.20
PD24021 Post dams or utility bars 12 patterns per sheet [PLASTIC] [wax preformed patterns clasps cera
NOBILIUM - RB14024 Retention bars Straightening
US$ 3.20
RB14024 Retention bars for use as a straightening bar- 12 patters per sheet- for acrylic partials or for
constructing special retentions in lingual bar cases - wax performed patterns [wax preformed patterns clasps cera
NOBILIUM - UT14034 Utility bars add construction
US$ 3.20
UT14034 Utility bars for supplementary additions in construction - 12 patterns per sheet - wax performed patterns
[wax preformed patterns clasps cera preformada ganchos para chromo]
Waxes All types
Special Waxes
YETI - 1860221 Blue Universal Wax 60gr
US$ 25.25
Yeti Blue Consequent Universal Wax 60gr - [ K# 1860221 ] - This wax has a the property of cool down slower than Thowax or IQ
wax - Good for oclusal modeling -
YETI - 102008 Green Consequent Wax 60gr
US$ 23.40
Yeti Green Consequent Wax 60gr - Specially designed for casting technique -- cools down slower than Thowax or IQ wax and little
bit softer -- -
272
21/05/2010 / 1284
Waxes All types
Special Waxes
YETI - 102155 Iq Diag. Wax Dentin 45gr
US$ 24.83
Yeti Iq Diagnostic Wax Dentin 45gr [ Y# 1860178 ]
YETI - 102006 Red Consequent Wax 60gr
US$ 23.40
Yeti Red Consequent Wax 60gr
Waxes All types
Sprues
ECCO- 101511 14gauge (0.06in - 1.6mm) Round
US$ 29.00
Plastic sprues 14gauge - 0.06in - 1.6mm - Round 1000pkg
ECCO - 100758 Blue Wax Sprue M 10ga 500pcs
US$ 17.90
ECCO Wax Sprue - M - Medium wax sprues w/reservoir 10ga [ 2.5mm ] - 500pcs - Blue ---- - [ bebedeors
conectores cera para colado azul ]
CFS - 214106 CFS Sprue Connect. Wax 5mm 1lb
US$ 22.88
CFS Sprue Connector Wax - 5mm - 1lb - ideal diameter for flexibles - [C#214106 ] - This material is easy to work
with does not get brittle -
CFS - 258106 CFS Sprue Wax 9.5mm 1lb
US$ 23.62
CFS Sprue Wax - 9.5mm - 1lb - ideal diameter for flexibles - [C# 258106 ] - This material is easy to work with does not get brittle -
ECCO - 100757 Red Wax Sprue S 12ga 500pcs
US$ 17.90
ECCO Wax Sprue - S - Small wax sprues w/reservoir 12ga [ 2.0mm ] - 500pcs - Red ---- - [ bebedeors conectores cera para colado
rojo ]
ECCO - 100759 Violeta Wax Sprue L 8ga 500pk
US$ 17.90
ECCO Wax Sprue - L - Large wax sprues w/reservoir 8ga [ 3.2mm ] - 500pk - Purpple ---- - [ bebedeors conectores cera para
colado violeta ]
Waxes All types
Sticky Wax
21/05/2010 / 1284
273
Waxes All types
Sticky Wax
YETI -34-1860080 Pink Stick On Wax 60gr
US$ 23.81
Pink Stick-On Wax 60gr - Ideal for Sprues placing casting chanels and pontics for weldering [ Adhesiva - fijado de partes de
soldadura y bebederos ]
KEYSTONE-034-1880750 Sticky Wax- Red Lumps
US$ 19.44
Sticky Wax- Red Lumps [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized
KEYSTONE-034-1880775 Sticky Wax- Yellow - 1lb
US$ 46.65
Sticky Wax- Yellow - 1lb [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized business in Dental lab
KEYSTONE-034-1880760 Sticky Wax- Yellow Lumps
US$ 20.50
Sticky Wax- Yellow Lumps Weight 1lb - [ Keystone Abrasives - Keystone Dental Tools ] [ Keystone Abrasives - Keystone Dental
Tools ] [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized business in Dental lab equipment & Dental
Porcelain Furnaces ]
KEYSTONE-1880770 Yellow Lumps Sticky Wax Nk 1lb
US$ 16.73
Sticky Wax- Nk - Keystone- Yellow Lumps 1lb [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized
Waxes All types
Stippled wax sheets
STIPPLED WAX SHEETS ( Ecco )
Tried and tested wax for waxing up the bases of upper partial dentures.
The stippled pattern gives the base a natural texture, is very easy to adapt and adheres well
Price
+
103538
Code
ECCO - Stippled Wax Coarse 24ga 10pk
Name
US$ 9.00
+Info
103539
ECCO - Stippled Wax Fine 24ga 10pk
US$ 9.00
+Info
103668
ECCO - Stipple Cast Wax - Fine 0.4mm
US$ 7.00
+Info
103669
ECCO - Stipple Cast Wax- Coarse 0.4mm
US$ 7.00
+Info
103670
ECCO - Stipple Cast Wax- Fine 0.5mm
US$ 7.00
+Info
103671
ECCO - Stipple Cast Wax- Coarse 0.5mm
US$ 7.00
+Info
STIPPLED WAX SHEETS ( Keystone )
Code
274
Price
+
102100
KEYSTONE - Stippled Wax Sheets 26ga 15pk
Name
US$ 23.00
+Info
102003
US$ 23.00
+Info
102004
US$ 23.00
+Info
21/05/2010 / 1284
Waxes All types
Utility Set up Wax
Waxes All types
Utility Set up Wax
KEYSTONE-034-1880200 Red Utility Wax 1lb Rope 5mm
US$ 12.35
Utility Wax - Red Square Rope - 1lb Box - 3/16in [5mm] - [K# 1880210 ] - Cera Utiliti roja en caja de tiras cuadradas - Specially suited
for built up and post - damming purposes -
KEYSTONE-034-1880180 Red Utility Wax 1lb Strips 5mm
US$ 11.80
Utility Wax - Red Round Strips- 1lb Box - 3/16in [5mm] - [K# 1880180 ] - Cera Utiliti roja en caja de tiras redondas - Specailly suited for built
up and post - damming purposes -
KEYSTONE-034-1880155 Set-Up Wax- Keystone 5lb
US$ 72.00
Set-Up Wax- Keystone 5lb [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is specialized business in
KEYSTONE-034-1880190 White Utility W. 1lb Strip 5mm
US$ 10.33
Utility Wax - White Round Strips- 1lb Box - 3/16 in [ 5mm] - [K#1880190 ] - Cera Utiliti blanco en caja de tiras redondas - Specially suited for
built up and post- damming purposes -
KEYSTONE-034-1880210 White Utility Wax 1lb Rope 5mm
US$ 13.10
Utility Wax - White Square Rope- 1lb Box - 3/16in [5mm] - [K# 1880210 ] - Cera Utiliti blanco en caja de tiras cuadradas - Specially suited
for built up and post- damming purposes -
Waxes All types
Wax in Sticks
KEYSTONE-034-1880460 Sticks 1lb Inlay Wax Mauve #2
US$ 55.00
Sticks 1lb Inlay Wax- Mauves #2 - Cera en barras [ Keystone Abrasives - Keystone Dental Tools ][ Us Dental Depot is
Waxes All types
Wire Waxes
WIRE WAX
An optimal wax mixture makes the ECCO and Keystone wax wire tension-free, thus limiting elastic recovery.
- Suitable for various fittings due to the different diameters and wax strengths.
- Easily shaped but dimensionally stable.
- No tangling or fissure buildup when shaping individually.
21/05/2010 / 1284
275
Waxes All types
Wire Waxes
Price
+
102359
Code
ECCO - Wax Wire Blue 2.0mm 12ga
Name
US$ 18.00
+Info
102301
US$ 18.00
+Info
102357
US$ 18.00
+Info
102358
US$ 18.00
+Info
034-1880500
KEYSTONE - Wire Wax Round 1/2lb 6ga
US$ 20.02
+Info
034-1880510
US$ 20.02
+Info
034-1880520
US$ 20.02
+Info
034-1880530
US$ 20.02
+Info
034-1880540
US$ 20.02
+Info
034-1880610
US$ 20.02
+Info
034-1880620
US$ 20.02
+Info
034-1880630
US$ 20.02
+Info
034-1880640
US$ 20.02
+Info
034-1880550
KEYSTONE - Wire Wax 1/2 Round 1/2lb 6ga
US$ 20.02
+Info
034-1880560
US$ 20.02
+Info
034-1880570
US$ 20.02
+Info
034-1880580
US$ 20.02
+Info
034-1880590
US$ 20.02
+Info
Zirconia
Burs for Zirconia
ZIRCONIA BURS ( Ecco )
*Compatible with Zirconzhan, Amman Girbach Ceramill and every system with 3mm shank
*Made in Germany
* 3 mm Shank
Price
+
102214
Code
ECCO - Ecco Zircon Drill bur/read set
Name
US$ 245.00
+Info
102349
ECCO - Ecco-Zircon Bur 4mm diam
US$ 32.00
+Info
102350
US$ 32.00
+Info
103404
US$ 32.00
+Info
102352
ECCO - Ecco-Zircon Bur 1mm x 8mm
US$ 32.00
+Info
102351
ECCO - Ecco-Zircon Bur 1mm x 12mm
US$ 32.00
+Info
READERS FOR ZIRCONIA BURS ( Ecco )
Price
+
102353
Code
ECCO - Ecco-Zircon Reader for 4mm dia
Name
US$ 25.00
+Info
103405
US$ 25.00
+Info
102354
US$ 25.00
+Info
102356
ECCO - Ecco-Zircon Reader for 1mm x
US$ 25.00
+Info
102355
ECCO - Ecco-Zircon Reader for 1mm di
US$ 25.00
+Info
Zirconia
Coloring for Zirconia
276
21/05/2010 / 1284
Zirconia
COLOR FOR ZICONIA ( Ecco )
Code
103838
Name
ECCO - ECCO Color for Zirconia Blocks 1 pk - 1 envelope for all shades. - see instructi...
Price
+
US$ 24.00
+Info
ZIRCONIA MASK ( Ceratec )
Price
+
103880
Code
CERATEC - Ceratec Zirconia Mask A 30gr
Name
US$ 23.00
+Info
103881
CERATEC - Ceratec Zirconia Mask B 30gr
US$ 23.00
+Info
103882
CERATEC - Ceratec Zirconia Mask C 30gr
US$ 23.00
+Info
103883
CERATEC - Ceratec Zirconia Mask D 30gr
US$ 23.00
+Info
Zirconia
Milling Units
ECCO- 103899 Manual Milling system
w/HP
US$ 6,440.00
ECCO-MILL Manual Milling system w/Hand piece Marathon heavy
dutty
- System includes - set of 4 burs and readers - 2 block horlders and 20
Free zirconia blocks ( when bought with the furnace )
- DUE TO PATENT PROBLEMS ONLY AVAILABLE SOUTHAMERICA
EXCEPT BRAZIL AND DROP SHIPPED FROM FACTORY LOCATION
- Pantograph - very similar to Zirconzhan milling system. NOT
AVAILABLE FOR THE US MARKET
21/05/2010 / 1284
277
Zirconia
Milling Units
Zirconia
Zirconia Blocks
AMANN GIRBACH Zirconia Blocks ( Ecco )
We offer Ceramill HIGH TRANSLUCENCY compatible blocks which are designed for use in both models Base
and Multi X .
Blocks come in packages of 3 to 10 per box, depending on size
- First grade Zirconia powder
- Made under COLD ISOSTATIC PRESSING AND MACHINING which gives a more uniform fitLifetime
- Shrinkage adjusted for 19.9% adjusted for F4.0 regulation
- Mounted in plastic frame to fit any Ceramill machine model
- Excelent translucency and strengh
Warranty: All Zirconia blocks come with a lifetime warranty in the US (20 year warranty overseas).
for more infomrmation visit us at www.usdentaldepot.com
Firing Instruction Firing time:
12hr FIRING CHART :
RT to 300 degrees C 1hr
300 to 1000 degree C 1hr
1450-1500 degr Celcius holding time 2 hr ( except for Syrona blocks final temperature 1530 C )
Natural cooling to 100 Degree C about 5 hours
Ceramill is a trademark of AmannGirbach co.
Price
+
101965
Code
ECCO - Zirconia Block for Amann Girrbach - 65x 30 x 20mm - 2 BLOCKS PER BOX - Shrinkag...
Name
US$ 60.48
+Info
101966
ECCO - Zirconia Block for Amann Girrbach - 40x 20 x 16mm - 4 BLOCKS PER BOX -Shrinkage...
US$ 23.04
+Info
101967
ECCO - Zirconia Block for Amann Girrbach - 40x 20 x 20mm - 4 BLOCKS PER BOX Shrinkage...
US$ 27.84
+Info
103844
ECCO - Zirconia Block for Amann Girrbach Base -Round 98x 14mm - 1 Block per Box - ( no...
US$ 170.88
+Info
101964
ECCO - Zirconia Block for Amann Girrbach Multi-X -Round 98x 14mm - 1 BLOCK PER BOX - S...
US$ 170.88
+Info
KAVO EVEREST ZIRCONIA BLOCKS ( Ecco )
We offer HT ( HIgh Translucency ) Kavo Everest compatible blocks
Blocks come in packages of 4 to 20 per box, depending on size
- Sinterization temperature 1530 Celcius 2 hours
- Made under COLD ISOSTATIC PRESSING AND MACHINING which gives a more uniform fitLifetime
- Shrinkage adjusted for 19.9%
Warranty: All Zirconia blocks come with a lifetime warranty in the US (20 year warranty overseas).
Firing Instruction
Firing time: 12hr
FIRING CHART :
278
21/05/2010 / 1284
Zirconia
Zirconia Blocks
1450-1500 degr Celcius holding time 2 hr ( except for Syrona blocks final temperature 1530 C ) Natural cooling to 100 Degree C about 5
hours
Kavo EVEREST are trademarks of Kaltenbach & Voight GmbH.
Price
+
103412
Code
ECCO - Zirconia Block for Kavo Everest - 16x16mm - 20 blocks per box - Good for single ...
Name
US$ 8.00
+Info
103413
ECCO - Zirconia Block for Kavo Everest - 20x20mm - 16 blocks per box - Good for single ...
US$ 12.80
+Info
103414
ECCO - Zirconia Block for Kavo Everest - 42x16x16mm - 8 blocks per box - Good for singl...
US$ 24.00
+Info
103415
ECCO - Zirconia Block for Kavo Everest - 42x20x20mm - 8 blocks per box - Good for sing...
US$ 46.40
+Info
103416
ECCO - Zirconia Block for Kavo Everest - 60x20x25mm - 4 blocks per box - Good for sing...
US$ 75.20
+Info
MANUAL SYSTEM Zirconia Blocks (
Ecco )
We offer HT ( HIgh Translucency ) ZirconZhan & Tizian
compatible blocks which are designed for use in all type of
Manual system .
Blocks come in packages of 3 to 10 per box, depending on
size
- Made under COLD ISOSTATIC PRESSING AND
MACHINING which gives a more uniform fitLifetime
Warranty: All Zirconia blocks come with a lifetime warranty
in the US (20 year warranty overseas).
12hr FIRING CHART :
1450-1500 degr Celcius holding time 2 hr ( except for Syrona
blocks final temperature 1530 C ) Natural cooling to 100
Degree C about 5 hours
ZirconZhan is a trade mark of Zirkonzhan -Tizian is
trademark of Schtz Dental
Price
+
101968
Code
ECCO - Zirconia Block for Manual System - 43x 25 x 16mm - 6 blocks per box for Tizia...
US$ 24.00
+Info
102159
ECCO. - Zirconia Block for Manual System - 52x 25 x 22mm - 6 blocks per box -for Tizia...
US$ 42.12
+Info
101969
ECCO - Zirconia Block for Manual System - 58x 29 x 16mm - 4 blocks per box - for Tizia...
US$ 45.12
+Info
101970
ECCO - Zirconia Block for Manual System - 75x 36 x 16mm - 2 blocks per box - for Tizia...
US$ 60.48
+Info
101971
ECCO - Zirconia Block for Manual System - D-Form Semiround 87x 56 x 22mm - 2 blocks pe...
US$ 100.80
+Info
21/05/2010 / 1284
Name
279
Zirconia
Zirconia Blocks
SIRONA - CEREC Zirconia Blocks (
Ecco )
HT SIRONA - CEREC INLAB Compt. Zirconia Blocks
We offer HT ( HIgh Translucency ) Sirona InLab compatible
blocks which are designed for use in all InLab milling units.
Blocks come in packages of 3 to 10 per box, depending on
size, and they all come with solid metal mandel .
- Made under COLD ISOSTATIC PRESSING AND MACHINING
which gives a more uniform fit
Lifetime Warranty: All Zirconia blocks come with a lifetime
warranty in the US (20 year warranty overseas).
Translucent zirconia blocks,the intensity reaches as high as
1200Mpa, the light-admitting quality is closer the natural tooth
Firing Instruction
- Firing time 12hr
- RT to 300 degrees C 1hr
- 300 to 1000 degree C 1hr
- 1000 to 1450 degree C 3hr
- 1450-1500 degr Celcius holding time 2 hr ( except for Sirona
blocks final temperature 1530 C ) Natural cooling to 100 Degree
C about 5 hours
Sirona inLab are trademarks of Sirona The Dental Company.
Price
+
101977
Code
ECCO - Cerec in Lab Zirconia Block - 20x14 x15mm - 12 blocks per box -...
US$ 10.56
+Info
101978
ECCO - Cerec in Lab Zirconia Block - 20x19x15mm -10 blocks per box - ...
US$ 12.48
+Info
101979
ECCO - Cerec in Lab Zirconia Block 40x15x15mm -8 Blocks per box - ...
US$ 23.04
+Info
101980
ECCO - Cerec in Lab Zirconia Block 40x19x15mm - 6 blocks per box -...
US$ 25.92
+Info
101989
ECCO - Cerec in Lab Zirconia Block Flip Block w/ 1 pin - 55x19x15.5mm - 4 blocks per bo...
US$ 41.28
+Info
101989-2
ECCO - Cerec in Lab Zirconia Block Flip Block w/ 2 pins - 55x19x15.5mm - 4 blocks per b...
US$ 41.28
+Info
ECCO - Cerec in Lab Zirconia Block Flip Block - 65x25x22mm - 4 blocks per box - ...
US$ 72.00
+Info
102162
Name
WIELAND ZENO BLOCKS CAD/CAM & MANUAL SYST ( Ecco
)
We offer HT ( HIgh Translucency ) Wieland Zeno 100%
compatible discs . Our discs are also full compatible with
Manual systems, like Zirconzhan, Tizian, Ecco-mill, Cercon
Brain Milling System , Sirona InLab MC XL Dental Milling
Unit Kavo everest .
- Blocks have the edge groves required for a Wieland
machine
- Blocks come in packages of 1 per box .
- Made under COLD ISOSTATIC PRESSING AND
MACHINING which gives a more uniform fitLifetime
12hr FIRING CHART :
280
21/05/2010 / 1284
Zirconia
Zirconia Blocks
1450-1500 degr Celcius holding time 2 hr ( except for Syrona blocks final temperature 1530 C ) Natural cooling to 100 Degree C about 5
hours
CERCON is a trademark of Degussa Dental GmbH. Kav o E VEREST are trademarks of Kaltenbach & Voight GmbH. Syrona inLab are
trademarks of S irona The Dental Company. Wieland ZENO are trademarks of WIELAND Dental Systems, Inc. ZirconZhan is a trade mark of
Zirkonzhan -Tizian is trademark of Schtz Dental
Price
+
101972
Code
ECCO - Zirconia Block for Round CAD/CAM or Manual System - 98x 10mm - 1 block per box...
Name
US$ 115.20
+Info
101973
ECCO - Zirconia Block for Round CAD/CAM or Manual System - 98x 14mm - 1 block per box ...
US$ 169.92
+Info
101974
ECCO - Zirconia Block for Round CAD/CAM or Manual System - 98x 16mm - - shrinkage 19.9...
US$ 186.24
+Info
101975
ECCO - Zirconia Block for Round CAD/CAM or Manual System - 98x 18mm - 1 block per box ...
US$ 202.56
+Info
101976
ECCO - Zirconia Block for Round CAD/CAM or Manual System - 98x 20mm - 1 block per box...
US$ 227.52
+Info
Zirconia abrasives
ZIRCONIA ABRASIVES
ZIRCONIA ABRASIVES ( Ecco )
Price
+
100754
Code
ECCO - ECCO Zirc. Grinder - Sintered Alumina Wheel - medium grit - 1pk ...
Name
US$ 25.20
+Info
100755
ECCO - ECCO Zirc. Grinder - Sintered Alumina Point - medium grit - 1pk ---(J# CX4160 ) ...
US$ 14.40
+Info
100756
ECCO - ECCO Zirc. Grinder - Sintered Alumina Cylinder - medium grit - 1pk--(j# CX4170) ...
US$ 16.20
+Info
Zirconia abrasives
Zirconia Abrasives
21/05/2010 / 1284
281
Zirconia abrasives
Zirconia Abrasives
COREMASTER (SHOFU )
282
21/05/2010 / 1284
Catalog Index / Indice del Catálogo
Heatless Wheels
Knock Down Wheels
1
2
3
3
Acrylic Orthodontic
Acrylics Heatcure
Acrylics High Impact
Acrylics Monomers
Acrylics Pour
Acrylics Selfcure
4
4
5
5
6
6
Acryl. Tooth Self
Cyanoacrylates
Chrome Cobalt
Gold color Alloys
Solder alloys
8
8
9
11
11
12
14
Aluminum Oxide
15
16
Accessories for articulators
Crown and Bridge Articulators
Disposable articulators
Plastic Articulators
Stone Free articulator
Cristal clear boxes
DENTURE
Flexible boxes
Ortho Boxes
Rigid Boxes
Shipping Boxes
Bristle brushes
Ceramist Brushes
Kolinsky Brushes
Lathe Brushes
Sable Brushes
Scotch Brite Brushes
Special Brushes
Synthetic Ceramic Brush
Alcohol Lamps
Electric Bunsens
Gas bunsens
3/32 Cross cut
3/32 Diamond Cut
NK 3/32 Bur Cutters
16
16
17
17
17
18
19
20
20
21
21
22
22
23
23
24
25
25
26
27
27
28
29
29
29
30
30
31
33
33
34
35
36
38
21/05/2010 / 1284
283
Burs Diamond
Diamond Sinter Burs
22 mm Diameter
25 mm Diameter
Alloy rings
Casting Ring Liner
Casting tongs
Crucible formers
Crucibles all types
Ringless formers
Wetting Agent
Casting Wells
Centrifugal Units
Light Cure Lab Composite
Compressor
Boil out curing units
Light curing units Pressure Pot 1.5Gal
Pressure Pot 2Gal
Washout only units
Curing Unit Parts
Dappens
Die Hardenders
Release Agent
Paint on die spacrs
0.7mm Cutting discs
3.0 mm Rouging discs
Fibr Glass Reinforced discs
Double sided
Plaster diamond discs
Single sided
Sintered diamond discs
Unmount Perforated Diam discs
Ventilated - Perforated
Aluminum Dowel pins
Ceramic & Zirconia pins
Double Dowel Pins
Mainstay Dowel Pins
Reverse Dowel Pins
284
38
39
40
41
41
42
42
42
43
43
44
44
45
45
46
47
48
48
48
49
50
50
51
51
52
52
52
53
53
53
54
56
56
56
57
57
57
58
58
58
59
59
59
60
61
61
62
62
62
63
63
63
64
64
65
66
21/05/2010 / 1284
All purpose Duplicating Mat.
Conditioners
Lab Putty
Silicone 4 duplicating
Work Stations
Dust collectors Parts
Felt Cones
Felt Cylinders
Felt Wheels
Fiber Posts
Glass fiber posts
Flasks & Compresses
Compresses
Denture Flasks
Duplicating Flasks
Flasks Accessories
Flasks for Microwave
Parts for CFS products
Flexible Nylons
Accesory Prods
Bulk Bags
CFS Cartridges
Flexible Trimmers
Flexite Acetal
Flexite Guard
Flexite MP
Flexite Supreme
Flexite kits
Flexite plus
Lubricant for Flexibles
Preformed Acetal Clasps
Repair material for flexibles
Glass Beads
Automatic spindles
Complete Units
Die Stones Natural
Lab Plasters
Lab Stones
Plastic die materials and epox
21/05/2010 / 1284
66
66
67
68
68
68
69
69
69
74
76
77
78
81
82
83
84
84
85
85
86
86
87
88
89
90
92
93
93
94
94
94
94
95
96
97
98
98
99
100
100
101
103
103
104
104
105
105
105
106
106
108
108
109
109
110
285
Pourable Base Stone
Contrangle parts
Parts
Accesories for Hanging Motors
Complete sets
Heat Sealers
Turbines for Lab Handpieces
Hydraulic Presses
Alginates
Silicone Material
Inection systems
110
110
111
111
111
111
112
113
113
114
114
115
116
117
117
118
119
Inlay Resin
Instruments Clinic
121
121
122
Crown Holders
Knifes
Wax instruments
122
123
123
123
124
Investments
Chrome Investment
Hi Heat investments
126
126
127
128
129
129
Lab. Accesories
130
Lab Equipment Accessories
Laboratory Benches
Scale
Accessories
Chucks for lathes
Complete lathes
Loupes & Magnifiers
Mandrels
Arbor Band Mandrels
Heavy Duty Mandrels
Special mandrels
Air micromotors ( neumatic)
Parts & Access for microscopes
Microscopes
Light For Microscope
Microscopes/Loupes
Mixing bowls
Model Former bases
286
130
131
132
132
136
136
136
139
142
142
143
143
144
144
144
145
147
147
148
148
149
149
21/05/2010 / 1284
Model Trimmers
Arch Model TYrimmer
Replacement Parts
Full mouth Customized
Practice Models
Tooth preparations
Parts for ovens
Thermocouples
Ovens Porcelain
Burnout ovens
Porcelain Ovens
Separated Ovens for Flexibles
Sinterization Ovens
Pinsetters - Pindex
Buffs - Muslin Chamois Flannel
Flannels
Polish Compounds & bars
Firing Pegs
Firing Trays for Porcelain
Plungers for pressable ceramic
Porcelain Trays
Shade Guides
Wet Mixing trays
Alglass alum copin
Ceratec High Fusion
Ceratec Ingots
Ceratec Kits
Ceratec Low Fusion
Ceratec Stains
Eshtetic Porcleain
Solera Porcelain
Vision Classic
Vision Low
Protection Glasses
Reliners Soft
Solft Reliners
Rubber Polishers
Rubber Wheels for Lathes
Rubber wheels
Sandblasters
Bracket Cleaner
21/05/2010 / 1284
150
151
151
153
155
155
156
156
156
156
157
158
160
161
162
162
163
165
172
172
173
174
174
175
175
176
176
177
177
178
178
178
179
185
185
186
187
188
189
193
198
204
209
211
212
212
213
216
216
217
217
218
219
219
220
287
Sand Blaster Tips
Sand Blasters parts
Saw Blades
Frames for saw blades ( arcs )
Scaler
Scaler Parts
Acrylic separators
Double Tier
Single Tier
Silic. Points
Fluxes Solders
Pins Burs and Drills
Typhoon burs
Splash Hoods
Parts for Steamers
Braided Strengtheners
Grid Strengtheners
Milling Units
Biocler G-II
PopDent Acryl Teeth
Buttane Torches
Propane Torches
Soldering torches
Tips for Torches
Torch Hoses
Parts for Torches
Ultrasonic Cleaners
Soft Eva
Manual Vacuum Mixers
Vacuum Mixers Units
Large Vibrators
Small Vibrators
Wax pot
Waxer Units
Waxes All types
Adapta system
Base Plate wax
Bite and Stick Blocks
Casting wax sheets
Cervical wax
Corning Wax
Dipping Waxes
288
221
222
223
224
226
230
231
232
232
233
233
233
233
234
235
235
236
237
237
238
238
239
239
239
240
244
246
246
246
247
247
247
247
248
248
252
253
253
254
255
257
257
258
258
259
260
260
260
261
261
262
263
265
266
266
21/05/2010 / 1284
Lingual wax
Margin Wax
Mesh green wax
Milling wax
Palate Wax
Preformed Wax Clasps
Special Waxes
Sprues
Sticky Wax
Stippled wax sheets
Utility Set up Wax
Wax in Sticks
Wire Waxes
Burs for Zirconia
Milling Units
Zirconia Blocks
267
268
269
269
269
269
270
270
272
273
273
274
275
275
275
276
276
277
278
Zirconia abrasives
281
Zirconia Abrasives
281
21/05/2010 / 1284
289

Abrasive Mounted Stones Abrasive Mounted

Transcription

Similar documents

Acrylics Heatcure

Código del producto Nombre del producto precio 28

Articulators and Occlusors Articulators and

Dental Chairs - US Dental Depot

Ball Valves - kitzeurope

- US Dental Depot

Código del producto Nombre del producto Precio 1 28