Kestrel Weather Meters

Transcription

Kestrel Weather Meters
Kestrel Weather Meters
FEATURES
• Data hold function
• Large easy-to-read display
• Waterproof and floats
• Quick-response, external thermometer
• Innovative design for stability and accuracy in abrupt condition
changes
• Patented, user-replaceable impeller (no tools needed)
• Ultralight impeller is mounted in jewel bearings for precision, wide
range of speeds and low startup speed
• Impeller is shock-mounted in a glass-reinforced plastic housing
• All instruments and accessories are completely assembled in the USA
The Kestrel 2000 also includes:
• A slip-on protective cover or soft carry pouch
• Neck lanyard
• Five Year Warranty
• User-replaceable CR2032 coin cell battery with
average life of 300 hours or 2 AAA batteries with
average life of 400 hours
• Kestrel Certificate of Conformity
Replacement
Impellers available.
K0801 $15.00
1000
2000
3000
4000
4100
Part No.
K0800
K0803
K0808
K0840
K0880
Price
$85.71
$110.00
$171.43
$291.43
$351.43
Current Wind Speed
X
X
X
X
X
Maximum Wind Gust
X
X
X
X
X
Average Wind Speed
X
X
X
X
X
Current Air Flow
X
Temperature
X
X
X
X
Wind Chill
X
X
X
X
Relative Humidity
X
X
X
Heat Stress Index
X
X
X
Dewpoint Temp
X
X
X
Barometric Pressure
X
Altitude
X
Wet Bulb Temp
X
Density Altitude
X
Backlit Display
X
X
X
X
Waterproof & Floats
X
X
X
X
X
Hard Cover
X
X
X
Optional
Optional
Clock
X
X
Computer Interface
Optional
Optional
Pressure Trend
X
Data Storage
X
X
X
X
Two Year Warranty
X
IA 800-747-8300
X
•
X
MN 800-736-3525
•
WI 800-588-7776
215
Soil Probes & Accessories
The “original” red plastic coated head and handle.
Heat treated, high tensile steel for today’s heavy
equipment. Clip is included.
For accurate calibration of fertilizer spreaders.
Weighs your material. Can also be used for
measuring inventory and determining weight
of all material.
Hitch Pins
Part No.
Size
Length
Price
Density Scale
HR34
3/4”
6 3/4”
4.19
Part No.
Description
Price
HR34-12
Dozen 3/4” Pins
50.23
T31697
Density Scale
30.01
HR78
7/8”
HR78-12
Dozen 7/8” Pins
HR100H
1”
HR100-12
Dozen 1” Pins
83.16
HR09
Replacement Clip
0.24
6 3/4”
5.13
61.55
7 1/2”
6.93
•
•
•
•
•
3” with foot step
1” diameter
8” depth or 12” depth
Total enclosed probe
No mixing of upper and lower level
soils
• Allows for easy removal of a fulllength core
• Nose piece increases efficiency
by compacting soil to smaller
diameter than inner receiving tube.
Simple, accurate fertilizer density scale.
Large capacity canister with cone shaped
top eliminates need for a level stick. Simple
finger holding ring and an easy to read level
vile for accurate balance. Durable, tough ABS
telephone-type plastic.
Density Scale
Part No.
Description
Price
FE8000
Density Scale
50.00
Stainless Steel Hinged Soil Probe
Part No.
Description
Price
SP1000
8" depth
149.78
SP3000
12" depth
163.08
Inexpensive probe - sell to your
farmer customers
Soil Probe
Part No.
Description
Price
SP2000
Soil Probe
76.93
• Simple, easy to use
• Management tool for your farmer customer
• Provide this service for your farmer customer
Dickey-John Soil Compaction Tester
216
www.davisequip.com
•
Part No.
Description
Price
DJ15585-0003
DJ Soil Compaction Tester
293.75
www.feieast.com
Agri-Cover Roll Tarp Systems
IA 800-747-8300
•
MN 800-736-3525
•
WI 800-588-7776
217
Agri-Cover Roll Tarp Systems
218
www.davisequip.com
•
www.feieast.com
Agri-Cover Roll Tarp Systems
IA 800-747-8300
•
MN 800-736-3525
•
WI 800-588-7776
219
Agri-Cover Roll Tarp Systems
220
www.davisequip.com
•
www.feieast.com
Agri-Cover Roll Tarp Systems
IA 800-747-8300
•
MN 800-736-3525
•
WI 800-588-7776
221
Agri-Cover Roll Tarp Systems
222
www.davisequip.com
•
www.feieast.com
Agri-Cover Roll Tarp Systems
IA 800-747-8300
•
MN 800-736-3525
•
WI 800-588-7776
223
Agri-Cover Roll Tarp Systems
224
www.davisequip.com
•
www.feieast.com
Agri-Cover Roll-Top Tarps
SRT-2™ Spool Roll Tarp
Features
• Fast and easy installation
• Comes standard with arched 7” galvanized steel end caps,
bows and ridge strap (as pictured)
• Steel components are zinc plated
• The tarp is made of heavy-duty double coated fabric
• Tarp color is available in white, black, gray, blue, red, orange,
yellow, green and brown
• Quick release brackets allows for easy tarp removal
SRT-2 Electric Spool Roll Tarp
Features
• From the comfort of your cab enjoy the convenience and safety of the SRT-2 Electric.
• With the touch of a cab mounted switch SRT-2 Electric operates smoothly and quietly, opening to any position desired and
closing securely.
• The tarp remains secure during the rolling operation even in windy conditions.
• Excellent quality, very dependable, fast, attractive, and economical to own.
SRT-2 Electrical Spool Roll Tarp
Part No.
Description
Price
SRT2-92-120-SS-M
Rolltarp-Manual SS End Caps S600/S800
1,111.00
SRT2-96-120-SS
Rolltarp-Electric SS End Caps
1,138.51
SRT2-96-144-SS
Rolltarp-Electric SS End Caps LRR10
1,738.08
SRT2-96-144-SS-M
Rolltarp-Manual SS End Caps LRR10
1,206.34
SRT2-96-192-SS
Rolltarp-Electric SS End Caps LR16
1,878.19
SRT2-96-192-SS-M
Rolltarp-Manual SS End Caps LR16
1,274.18
SRT2-96-288-SS
Rolltarp-Electric SS End Caps 24T
2,102.84
SRT2-96-288-SS-M
Rolltarp-Manual SS End Caps 24T
1,626.18
IA 800-747-8300
•
MN 800-736-3525
•
WI 800-588-7776
225
Fitted Tarps / Shurco Roll Tarps
Fitted Tarps
The fitted tarps listed below are made of 16
oz. vinyl coated polyester fabric. They include
grommets and shock cord and have a standard
drop of 6”. The color we stock is listed next to the
model of spreader it fits. Please call FEI for any
tarp requirements not listed on this page, or if
you desire an alternate to the color listed below.
Box size is required for pricing.
Part No.
Size
Model
Price
17471
92” x 96”
S500 Willmar Spreader-Black
138.56
17469
92” x 120”
S600/S800 Willmar Spreader-Black
218.96
17474
96” x 144”
S365/S265 Willmar Tender-Black
250.73
17475
96” x 192”
LR16 Willmar Tender-Black
388.00
17468
85 1/2” x 85 1/2”
W4 Willmar Spreader-Black
168.00
Shock Cord-B300
2.34 / Foot
WR17476
SHUR-LOK Junior
For when speeds do not exceed 35 miles
per hour. For fertilizer spreaders and gravity
boxes.
SHUR-LOK
Original roll tarp comes standard with aluminum end caps and
tarp stops — for when speeds exceed 35 miles per hour. For
fertilizer tenders, grain trucks and other rolling stock.
Shur-Lok
Shur-Lok Junior
Part No.
Shur-Lok Original
Price
Part No.
Shur-Lok Original
Price
WCSL-10
10’ Length
705.72
WC1208
8’ Length (S500)
522.86
WCSL-11
11’ Length
747.14
WC1201
10’ Length (S600-S800)
528.57
WCSL-12
12’ Length
755.71
WC1211
11’ Length
524.30
WCSL-13
13’ Length
777.14
WC1212
12’ Length
526.53
WCSL-14
14’ Length
790.00
WC1213
13’ Length
544.30
WCSL-16
16’ Length
844.30
WC1214
14’ Length
563.12
WCSL-24
24’ Length
1,094.30
WC1215
15’ Length
593.30
226
www.davisequip.com
•
www.feieast.com
Shurco LiteAll Products
Key Features:
- SMART-Touch Express Mode Technology
- Two Way Communication
- 2-1/2” x 2-1/2” Backlit Digital Screen
- Precision Control
- Controls More Than 100 Different Devices
- Increased Operational Range
- Rechargable Lithium Battery and
12-Volt Charging Cradle
The SMART2™* is the only state-of-the-art remote that offers two-way communication in an easy-to-read digital display with the
feedback you need to run smarter and more efficiently. Lets you run up to 100 different devices from more than 100 feet away.
The SMART2™ remote operates electric tarps, electric hopper doors, lighting, even swing auger
drives! It senses and displays all of your electric accessories, relaying real-time positioning of your tarps and traps. Constructed of
impact-resistant ABS plastic, the SMART2™ has a 2-1/2 inch digital screen that’s easy to read and backlit for night operation. With
its advanced wireless technology, you don’t have to worry about interference from your neighbor’s remote.
This is the most advanced remote of its kind on the market. It doesn’t just open or close your chosen application – it allows you
to specify the exact positioning you desire! Using Express Mode, you can automatically set your tarp to stop away from the tarp
stops, saving on wear and tear and maintenance. Or open your traps based on the capacity of the elevator pits. The revolutionary
design of the SMART2™ gives you that kind of precision control without having to leave the cab.
You get advanced motor protection – you’ll know right away if a motor slows down or stalls. And it’s safe! The transmitter has a
built-in emergency shut-off; close the patent-pending flipstyle lid and whatever operation is running stops immediately. Plus, no
more batteries to buy! The SMART2™ runs on a rechargeable lithium battery, and the charging cradle is included. *Patent-Pending
IA 800-747-8300
•
MN 800-736-3525
•
WI 800-588-7776
227
Jack Assemblies
Part No.
Description
Price
Part No.
Description
Price
WR22432
Jack Assy. w/Mtg. Plate
111.22
TO1040
Bulldog Jack - Short
70.94
WR21126
Gear Kit
21.50
BDJ-170
Bulldog Jack - Long
98.00
WR21127
Crank Repair Kit
21.80
WR11757
Replacement Crank
18.00
WR23464
Pull Pin Assy. w/ Chain
20.50
WR22428
Mounting Plate
21.10
AG719740
Groove Pin
12.90
WR21130
Drop Leg Assy.
90.60
These Bulldog Jacks have a 2000#
lift capacity. Plate mount to weld on
new or existing equipment or just for
replacement.
Short Bulldog - A = 11 1/4”, B = 21 1/4”.
Long Bulldog Jack - A = 14 1/2”, B = 29 1/2”.
Willmar new style jack used on all fertilizer spreaders.
7000# lift capacity with 15” of travel. The drop leg adds
another 13 1/2” of lift adjustment.
Part No.
Description
Price
Part No.
Description
BDJ-150P
Bulldog jack - Short/pipe Wt. 78.82
529904D1
Jack (Old Style Willmar)
101.00
WR11757
Replacement Crank
18.00
DMW76005
Bulldog jack - Long/pipe Mt.
65.39
WR11757
Replacement Crank
18.00
WR11760
Spring for Lock Plunger
1.70
WR11761
Lock Plunger
6.48
WR11755
Snap Ring
4.60
These Bulldog Jacks have a 2000#
lift capacity. Pipe mount to weld on
new or existing equipment or just for
replacement.
Short Bulldog - A = 11 1/4”, B = 21 1/4”
Long Bulldog Jack - A = 14 1/2”, B = 29 1/2”
Replacement jack for Willmar spreaders
(old style).
Part No.
Description
Price
Part No.
Description
Price
32253000
Adjusting Screw Assy.
122.21
T5810
4x4 Jack
141.95
32230100
Handle Repair Kit
13.25
32210740
Handle Kit - 02295000 Jack
12.20
Drop foot jack for heavier tongue
spreaders or trailers. 5 position dropfoot
with 12” travel - 8” square sandplate. 27”
collapsed - 47” extended - 20” total travel.
10,000# lift capacity and 15,000# static
capacity.
32253000 Adjusting screw assy. is for the
gauge wheel on 3250 - 3100 - 3200 - H2
and D3 DMI toolbars. It has a 5000#
capacity and replaces Part No. 02295000.
Part No.
Description
Price
32230000
Jack Assy.
110.53
32230000 Jack Assembly (3000# lift) is for
the tongue on the following DMI toolbars:
4250 - 5250 - 3250 - 3100 - 3200 - 4100 4200 - 4200II - PT - 4300 - 5300 - 3300 – it
replaces Part No. 32220000.
228
Price
www.davisequip.com
Part No.
Description
Price
27827
Auger Jack - 1-1/2” Ton Lincoln
CALL
WR36704
3 Ton Jack (Red)
800.00
WR21012
Repair Kit - 21014 Jack
32.51
WR11781
Repair Kit - 19625 (Green Jack)
39.40
The Jacks above are for 8-10-16 ton Willmar
tenders. Part No. 27827 replaces jack
number 19625 (Green Century).
•
www.feieast.com
Willmar Tender Auger Parts Breakdown
Hydraulic Auger Drive
Item
Part No. Req’d
Description
1
WR12999 2
90˚ Elbow, - 12 Male JIC to - 12 Male
Straight Thread-Orb
WR1864545˚ Elbow
2
AG08537 10
Split Bushing (New #29200)
3
70923362 5
Center Lock Nut, 5/16” - 18 UNC
4
AG608535 5
Tube Clamp (New #29199-Plate, #29200-Clamp)
5
WR18267 5
Hex HD Cap Screw, 5/16” - 18 UNC x 2” Lg (Grade 5)
6
61770
1
Key, 5/16” x 5/16” Keystock x 1 1/2” Lg
7
WR11627 1
Coupling Sleeve, 1 1/4” Bore (11628 1” Coupling)
8
32923PF
2
Hex Nut, 1/2” - 13 NC
9
WR23823 1
Hydraulic Motor
554783
–
Seal Kit for Part Number 23823 (not shown)
10
AG550817 2
Hex HD Cap Screw, 1/2” - 13 UNC x 1 1/2” Lg (Grade 5)
11
WR21829 2
Hydraulic Hose Assy., - 12 Male JIC to - 12 Female,
37˚ JIC Swivel x 30” Lg
12
WR18221 2
Hydraulic Tube Assembly 16’ (22677-19’)
13
WR10422 2
Lock washer, 1/2” ID
10” Rear Auger Assembly
Item
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
24
25
26
Part No. Req’d
WR23814 1
WR25614 1
10163
4
WR18242 1
WR18243 1
WR25540 1
WR10138 4
AG550558 6
WR10649 1
AG559989 6
WR23807 1
WR17734 1
WR10433 1
WR18218 1
WR23465 1
WR22680 1
WR23466 1
WR35913 1
WR24639 2
47976PF 4
WR10355 1
WR18216 1
32921PF 6
42573PF 4
WR10420 4
AG561904 2
WR10311 2
WR10349 2
WR23810 1
WR17746 1
WR18222 1
WR18670 1
Description
Auger Box - 8 - 10 Ton Tender
Auger Box - 16 Ton Tender
Center Lock Nut, 3/8” - 16 UNC
Auger Housing, 16’
Auger Housing 16’ SS
Auger Housing 19’ SS
Cap Screw, 3/8” - 16 M/S x 1” Lg (Grade 5)
Lockwasher, 7/16” ID
4 Hole Flange Bearing, 1 1/4” Bore
Cap Screw, 7/16” UNC x 1 1/4” Lg (Grade 5)
Clean Out Gate
Ryertex Spacer
Machine Bushing, 1 1/4” ID
MS Auger Screw Assy. 16’
SS Auger Screw 16’
MS Auger Screw 19’
SS Auger Screw 19 (Includes Items 2, 12 & 13)
SS Auger Screw 21’
Drive Shaft
Cap Screw, 3/8” UNC x 2 1/2” Lg (Grade 5)
Roll Pin, 3/16” Dia x 1 1/2” Lg.
2 Hole Flange Bearing, 1 1/4” Bore
Hex Nut, 7/16” - 14 UNC
Hex Nut, 3/8” - 16 UNC
Lockwasher, 3/8” ID
Flat Washer, 7/16” ID
Clevis Pin, 3/8” Dia - 2 1/4” Lg
Hair Pin
Auger Box Insert
Pin
Motor Mount
Dry Pin Plate
IA 800-747-8300
•
25
26
10" Rear Auger Assemblies Complete
Part No.
Description
Model Used
Drive
25544
10” x 19” Stainless
LR16 - 16 Ton
Mechanical
25542
10” x 19” Stainless
LR16 - 16 Ton
Hydraulic
25543
10” x 19” Stainless
LR8/10 - 8 & 10 Ton
Mechanical
507472D1
10” x 19” Stainless
LR8/10 - 8 & 10 Ton
Hydraulic
18281
10” x 16” Mild Steel
LR16 - 16 Ton
Mechanical
18616
10” x 16” Mild Steel
LR16 - 16 Ton
Hydraulic
23468
10” x 16” Stainless
LR16 - 16 Ton
Mechanical
23471
10” x 16” Stainless
LR16 - 16 Ton
Hydraulic
18244
10” x 16” Mild Steel
LR8/10 - 8 & 10 Ton
Mechanical
18618
10” x 16” Mild Steel
LR8/10 - 8 & 10 Ton
Hydraulic
23467
10” x 16” Stainless
LR8/10 - 8 & 10 Ton
Mechanical
23472
10” x 16” Stainless
LR8/10 - 8 & 10 Ton
Hydraulic
MN 800-736-3525
•
WI 800-588-7776
229
Willmar Tender Auger Parts Breakdown
Side Discharge Auger Group
Item
Part No. Req’d
Description
1
WR27879 1
AUGER TUBE WLDMT - 10” SS x 17’
AG128439
Auger Tube 20’
2
WR27877 1
DISCHARGE BOX WLDMT
3
WR27224 1
GATE - CLEAN OUT, DISCHARGE
4
WR10349 1
PIN - HAIR, 1/8” x 2 1/2” LG
5
WR27876 1
COUPLER - SFT, MOD 1.25B x 14T
6
WR27881 1
AUGER SCREW - 10” x 17 FT, LH SS (INCLUDES ITEMS 5, 7-11) AG128447Screw 20’
7
WR11513 2
NUT - CENTER LOCK, 3/8” - 16 UNC
8
47976PF
2
SCREW - HEX HD CAP, 3/8” - 16 UNC x 21/2” LG (GRADE 5)
9
WR24637 1
BUSHING - AUGER SCREW, 1 3/4” OD
10
WR27873 1
DRIVE SHAFT
11
WR10355 1
PIN - ROLL, 3/16” DIA x 1 1/2” LG’
12
WR10433 1
BUSHING - MACHINE, 1 1/4” ID
13
WR17734 1
SPACER - RYERTEX
14
AG559989 4
SCREW -HEX HD CAP, 7/16” -14 UNC x 1 1/4” LG (GRADE 5)
15
AG561904 4
WASHER - FLAT, 7/16” ID
16
WR10649 1
BEARING - FLANGE, 4-HOLE, 1 1/4” UNC
17
AG550558 4
WASHER - LOCK, 7/16” ID
18
32921PF
4
NUT-HEX, 7/16” - 14 UNC
19
WR10138 4
SCREW - HEX HD CAP, 3/8” - 16 NC x 1” LG (GRADE 5)
20
WR10420 4
WASHER - LOCK, 3/8” ID
21
WR11508 4
NUT - HEX, 3/8” - 16 UNC
WR27880 4
HYDRAULIC AUGER ASSEMBLY 16- and 24-TON
9
Hydraulic Auger Drive Group (Side)
Item
Part No. Req’d
Description
1
WR12999 2
ELBOW - 90-DEGREES - 12 MALE JIC TO - 12 MALE
STRAIGHT THREAD ORB
2
WR11274 6 CLAMP - TUBE, 3/4” OD
3
AG550817 2
SCREW - HEX HD CAP, 1/2” - 13 UNC x 1 1/2” LG (GRADE 5)
4
WR10422 2
WASHER - LOCK, 1/2” ID
5
WR27932 2
TUBE ASSEMBLY - HYDRAULIC AUGER
6
WR27882 1
MOTOR - HYDRAULIC
554783
KIT - SEAL, FOR PART NUMBER WR27882 (NOT SHOWN)
7
WR27979 2
HOSE ASSEMBLY - HYDRAULIC - 12 FEMALE 37-DEGREE
JIC SWIVEL TO -12 MAILE JIC - 12R2 HOSE x 21” LG
8
32923PF
2
NUT - HEX, 1/2” - 13 UNC
9
524598D1 1
Rubber Washer/Motor Seal
230
www.davisequip.com
•
www.feieast.com
Willmar Tender Auger Parts Breakdown
16- & 24-Ton Sideshooter
Hopper Cross Auger Group
Item
Part No. Req’d
Description
Item
1
10163
A/R
NUT - CENTER LOCK, 3/8” -16 UNC’
2
WR26937 12
TAB
3
WR10137 A/R
SCREW - HEX HD CAP, 3/8” - 16 UNC x 3/4” LG
(GRADE 5)
4
WR26947 1
SUPPORT WLDMT - HYDRAULIC MOTOR
5
WR27079 A/R
AUGER BOX WLDMT - TWIN HOPPER
6
WR26943 A/R
GATE - CLEAN OUT SIDE
7
WR27363 A/R
GATE WLDMT - CLEAN OUT, BOTTOM
8
WR27199 A/R
TUBE WLDMT - AUGER, CENTER
9
WR27209 1
TUBE WLDMT - AUGER, REAR
10
42573PF
24
NUT - HEX, 3/8” - 16 UNC
11
30289PF
10
WASHER - FLAT, 3/8” ID
12
WR27232 6
SPACER - PIPE
13
WR20537 6
SPRING
14
WR27237 1
SEAL PLATE WLDMT - DISCHARGE
15
WR27233 1
RING - AUGER, RUBBER
16
WR27234 1
RING - AUGER, STAINLESS STEEL
17
WR10138 4
SCREW - HEX HD CAP, 3/8” -16 UNC x 1” LG
(GRADE 5)
18
WR27235 2
MOUNT - SEALING PLATE
19
WR11509 6
NUT - HEX, 3/8” - 16 UNC SS
IA 800-747-8300
•
Part No. Req’d
Description
20
WR10416 6
WASHER - FLAT, 3/8” ID SS
21
WR10202 3
SCREW - HEX HD CAP, 3/8” 16 UNC x 1 1/2” LG
SS
22
WR27184 3
ADJUST WLDMT - BEARING
23
WR27523 1
HOUSING - AUGER WITH WOOD BUSHING
WR27522 1
HOUSING WLDMT - WOOD BUSHING
(NOT SHOWN - INCLUDED WITH ITEM 23)
24
WR27525 1
SHAFT - AUGER WITH HOLES, SS
25
WR27524 A/R
BUSHING - AUGER SCREW
26
47976PF 8
SCREW - HEX HD CAP, 3/8” - 16 UNC x 2 1/2”
LG (GRADE 8)
27
WR27464 1
AUGER SCREW, SS 16 AND 24 TON
28
WR24639 1
SHAFT - AUGER DRIVE WITH HOLES
29
WR27945 1
CONNECTING WDLMT - AUGER SCREW
30
WR10433 1
BUSHING - MACHINE, 1 1/4” ID x 18 GA
31
WR17734 1
SPACER - RYERTEX
32
WR10649 1
BEARING - FLANGE, 4-HOLE, 1 1/4” BORE
33
WR11627 1
COUPLING - SLEEVE
34
WR10157 4
SCREW - HEX HD CAP, 1/2” - 13 UNC x 1 1/4” LG (GRADE 5)
35
70924919 4
WASHER - FLAT, 1/2” ID
36
70926946 6
NUT - CENTER LOCK, 1/2” - 13 UNC
37
AG550817 2
SCREW - HEX HD CAP, 1/2” - 13 UNC x 1 1/2” LG (GRADE 5)
38
WR27969 1
AUGER SCREW - 10” x 8’ LH SS
MN 800-736-3525
•
WI 800-588-7776
231
Bearings
Pillow Block Bearing
Part No.
Size
Price
WR10636
Willmar - 1” - Tyler
10.68
WR20175
Willmar - 1-1/4”
43.60
WR20173
Willmar - 1-1/2”
21.62
WR10639
WIllmar - 1” Heavy Duty
10.85
Take-Up Flange Bearing
Part No.
Size
Price
WR10652
Willmar - 1”
12.18
Two-Hole Flange Bearing
Part No.
Size
Price
WR18216
Willmar - 1-1/4”
14.35
Two-Hole Flange Bearing
Part No.
Size
Price
WR10644
Willmar - 1” - Tyler
14.19
Three-Hole Flange Bearing
Part No.
Size
Price
WR10645
Willmar - 1”
12.45
WR10647
Willmar - 1-1/4”
126.00
Bearing Insert
232
Part No.
Size
Price
WR10634
1” Insert
7.28
WR10635
1-1/4” Insert
9.70
www.davisequip.com
Four-Hole Flange Bearing
•
Part No.
Size
Price
WR10648
Willmar - 1”
36.20
WR10649
Willmar - 1-1/4”
14.85
www.feieast.com
Pulleys, Belts, PTOs
V-Idler
Flat Idler
Sheave
Part No.
Size
Spreader
Price
WR10460
6” x 1” Sheave
Willmar-Tyler
27.60
WR10454
8” x 1” Sheave
Willmar-Tyler
33.40
WR10450
3” x 1” Sheave
Willmar
35.40
WR10464
6 1/2” x 5/8” V-Idler
Willmar-Tyler
15.41
WR10461
4 1/2” x 5/8” Flat Idler
Willmar
33.90
WR20007
4” x 3/8” Sheave
Willmar
27.10
WR25841
Sheave 5”
Willmar
24.60
Spreader Belts
Double V-Belt – BB Series
Part No.
Size
Spreader
Price
WR10487
BB112
Willmar
46.20
WR38791
BB108
Willmar
67.20
V-Belt – V-Series
1” Implement End X 540 Spline
48.75” Extended W/10” Lap
32” Compressed - Plastic Shields
Part No.
Description
Price
WR22001
PTO Assy. - 540 RPM
261.00
WR22709
PTO Assy. - 540 Tractor Half
219.00
WR21997
Shield Assy. - TH/SH Complete Weasler
77.50
WR21991
Bearing Kit - 540 Weasler - G&G
19.09
WR11828
PTO Assy. - 1000 RPM
283.00
WR22000
PTO Assy. - 540/1000 RPM
330.00
WR21998
Shield Assy. - 540/1000
94.00
W29200600
Retainer Kit - G&G
3.66
WR30448
Retainer Kit - Weasler – 2 Required
10.70
21999W
Shield Assy. - TH/SH G&G
24.36
IA 800-747-8300
•
MN 800-736-3525
Power Take-Off Shafts
PTO Shaft
•
WI 800-588-7776
233
Distributor Blades, Sprockets, Roller Chains
Distributor Blades
Part No.
Description
Spreader
Price
WR15226
Set w/ Bolts
Willmar
78.80
Willmar
Sprockets
Part No.
Description
Price
WR10688
23T x 1” - #50
63.30
WR10689
13T Idler x 1” - #50
9.27
WR10693
12T x 1” - #60
12.23
WR10700
36T x 1 1/4” - #60
64.70
WR12368
13/24T x 1” - #50
66.30
WR12363
30/40T x 1” - #50
86.10
Willmar
Roller Chain
Bulk Chain
Connector
Offset
Size
Type
Part No.
Price
Link Part No.
Price
Link Part No.
Price
40
Mild Steel
40-MS
0.13
40-CLMS
0.58
40-OLMS
.84
40
Stainless
T30925
0.89
T31028
2.08
T31029
2.90
50
Mild Steel
50-MS
0.28
50-CLMS
0.71
50-OLMS
1.42
50
Stainless
WR10568
0.98
WR10575
4.95
WR10574
4.15
60
Mild Steel
60-MS
0.33
60-CLMS
1.01
60-OLMS
1.62
60
Stainless
T20585
1.64
T20195
2.68
T20196
5.60
2050
Mild Steel
2050-MS
0.22
2050-CLMS
2.73
2050-OLMS
1.36
2050
Stainless
WR10629
1.01
WR10633
5.03
T30688
6.25
80
Mild Steel
80-MS
0.86
80-CLMS
1.83
80-OLMS
2.80
100
Mild Steel
100-MS
1.15
100-CLMS
2.95
100-OLMS
5.38
234
www.davisequip.com
•
www.feieast.com
IA 800-747-8300
•
MN 800-736-3525
M-399 Complete
13HRM
Complete
19122 Hub
Only
15435 Hub
Only
25-5LME
4288OUCIE
Complete
15435 Hub
Only
John Blue
Prior 6 Bolt
After 1976
Willmar
S500
Willmar
S600
Prior 5 Bolt
Pre 1976
Prior 8 Bolt
TCI Moonwalk 6 & 7
Ton
•
WI 800-588-7776
28188800
BB81018
4410087
DMI
B-B
Dalton
28170900
28180300
28163310
DMI
DMI
25-66LME
Complete
Prior 6 Bolt
Pre 1976
DMI
EW2878000
Complete
Electric
Wheel
Q810
N/A
15442
28688900
Complete
DMI 866 &
870
TCI F4 4
Ton
80-048
80-039
Complete
888
803
709
633
Q819
Q819
Q890
4266OUCI
Q889
H618
25520
21882890
21882480
21883270
21882560
21882330
80-050
80-050
80-048
80-050
15442
15494
80-048
M329
21882480
80-048
101-023B
Ag Systems
80
H611
101-024
Complete
55577
Ag Systems
101
MFG#
76480
Complete
106604
LM50316
69310
25520
48510
67010
LM24710
29710
25520
4T2720
25520
LM29710
4T2720
LM501310
25520
25520
JL69310
25520
LM29710
LM501310
MFG#
NO. 9 INNER RACE
P&H
NO. 8 HUB
21882330
21882330
21882880
21882330
21881780
55013
55013
55013
15441
14276
55013
15441
15493
55013
M327
21882330
80-050
101-025B
55013
67010
67010
67010
25821
67010
11910
LM67010
67010
67010
4T3729
14276
LM67010
4T3729
LM67010
LM67010
LM29710
LM67010
LM29710
LM67010
LM67010
MFG#
NO. 7 OUTER RACE
21871630
21871496
21871800
21871380
21871250
80-051
101-023
21871800
15434
80-047
80-051
15434
15488
80-047
M328
21871496
80-047
101-023
55580
25580
501349
69349
521430
48548
67048
LM48548
29749
25590
3720
25580
LM48548
3720
LM501349
25580
25580
JL69349
25580
LM29749
LM501349
MFG#
NO. 10 INNER BRG.
2187250
21871250
21871381
21871250
21870750
55020
55020
55020
15436
14125A
55020
15436
15490
55020
M326
21871250
80-051
101-025
55020
67048
67048
67048
25877
67048
11949
LM67048
67048
LM67048
2796
103-969
LM67048
2796
LM67048
LM67048
29749
LM67048
LM48548
LM67048
LM67048
MFG#
NO. 6 OUTER BRG.
28477700
28477700
28480300
28477700
28463300
45896
15491
28477700
15438
103-969
45896
15438
15491
45896
M354
28477700
103-969
45896
55021
NO. 2 CAP
-
-
-
-
MFG#
21931630
21932000
21931500
21931501
4902
21931630
2193200
21932000
42385
4902
15433
15487
42385
M330
21931630
80-046
101-022
55581
NO. 11 SEAL
MFG#
263062UH
CR16289
CR521430
CR15190
CR14975
CR17617
CR16289
CR521430
CR521430
CR17617
CR25091
22302VHY
22334SA
20334TA
CR16289
19353SB
CR17617
203062VH
Hubs & Bearings
235
Waconia Accessories
Reference Pictures Above With
References Below.
A. Waconia Dust Devil Loading Spout.
B. Double Clam Gate can be manually operated or electric-air
operated.
C. Dead Stop (to prevent excess wear).
D. Two-way Basket Valve (with stainless steel basket and greaseable ball bearings). Manually operated or electric-air operated.
E. Half Moon Distributor for close leg fitting. Manual or “all
electric” operation. Electric readout available.
F. Two way Drop Out Valve with stainless steel basket and
grease-able ball bearings. Manually operated or electric-air
operated.
G. Distributor with stainless steel internal spout and grease-
236
www.davisequip.com
able ball bearings. Manual or “all electric” operation.
Electric readout available.
H. Salem Single Clam Gate “dust tight” with stainless steel
interior and grease-able ball bearings. Manually operated
or electric-air operated.
I. Square to Round Adapters. Available in all sizes and in
carbon or stainless steel.
J. Adjustable Elbows also available in three-part longsweep models. Available in all sizes and in carbon or
stainless steel.
K. Boot Hoppers can be furnished for any type of loading.
Special payloader hoppers are designed to fit your need.
•
www.feieast.com
Bearings, Sprockets, Belts, Air Cylinders
Bearings
Castings are made from heavy duty cast iron.
Each bearing has locking set screws.
Part No.
Description
Price
WA7000080
1 15/16” Pillow Block
74.41
WA7000714
2 3/16” Pillow Block
95.30
Re-lubrication of the bearing is on the front
side.
WA7000701
1 3/16” 2 Bolt Flange
38.25
WA7000704
1 7/16” 2 Pillow Block
51.04
WA7000718
2 7/16” 2 Pillow Block
113.97
WA7000694
1 11/16” 4 Bolt Flange
23.19
Part No.
Description
Bushing Price
Required
WA7001255
Sprocket-15T-#80RC
1615TL
59.25
WA7001310
Sprocket-60T-#80RC
2517TL
285.86
WA7001265
Sprocket-20T-#100RC
2517TL
133.34
WA7001284
Sprocket-30T-#100RC
3020TL
195.54
WA7001293
Sprocket-40T-#100RC
3020TL
215.06
WA7001282
Sprocket-28T-#100RC
3020TL
189.09
WA7004815
Sprocket-14T-#100RC-2 3/8” Bore
-
134.52
WA7000829
Bushing 1 7/16”-1615TL
-
16.35
WA7000838
Bushing 2 3/16”-2517TL
-
25.39
WA7000841
Bushing 2 7/16”-2517TL
-
25.86
WA7000842
Bushing 2 7/16”-3020TL
-
38.88
WA7000835
Bushing 2 15/16”-3020TL
-
38.19
WA7000693
1 11/16” Wide Slot Takeup
86.85
WA7000721
2 7/16” 4 Bolt Flange
116.72
WA7000710
2 15/16” Pillow Block
183.10
Sprockets And Taper Lock Bushings
All Martin sprockets are either finished bore or taper lock
bushing style. When taper lock style sprockets are ordered,
the taper lock bushing must be ordered separately.
Drive Belts
The cogged construction of Goodyear belts provides the high flexibility
required for small sheaves, typical of drives with relatively short center
distances. The cogs also provide a larger surface area to dissipate heat
and prolong belt life. These belts eliminate mismatch problems as each
belt in a single length codes is identical in size and performance to every
other belt in that size, no matter when it was produced.
Part No.
Description
Price
WA7000745
B-97 Belt
22.33
WA7000749
3V x 530 Belt
11.42
WA7000750
3V x 560 Belt
11.84
WA7000751
3V x 600 Belt
12.40
WA7000752
3V x 630 Belt
12.78
WA7000753
3V x 670 Belt
13.32
WA7000754
3V x 710 Belt
13.65
WA7000755
3V x 750 Belt
14.84
WA7000756
3V x 800 Belt
16.87
Air Cylinders
These air cylinder assemblies are for
the Salem valves in a Waconia blending
tower. In 1992 Waconia Manufacturing
made a dramatic improvement in this
valve assembly by eliminating the open
and close solenoids and the exhaust
valve. Those three items have been
replaced in the valve by one MAC valve.
If you have the old style cylinder and
need replacement parts — order part
no. 7011207 - MAC valve replacement
kit. It will convert your air cylinder to the updated, more efficient version.
IA 800-747-8300
•
MN 800-736-3525
Part No.
Description
Price
WA7011207
Kit-MAC Valve Replacement
165.21
WA7019790
Valve - 24 Volt MAC
171.06
WA3001033
Repair Kit for WA7019790
38.81
WA3001027
Muffler - MAC Valve (2 req. per valve)
5.72
WA7011214
2 1/2” x 11” Air Cyl. Assy. w/ MAC Valve
602.00
WA7200221
Cylinder Only - 2 1/2” x 11”
384.00
•
WI 800-588-7776
237
Conveyor & Elevator Leg Accessories
Conveyor Belting
The ”Z” profile moves smoothly and quietly on the return side, reducing the vibration that causes slippage and roll back
of granular and free-flowing materials. In most cases, it carries up to 30% more product because of its unique continuous
design. However, it also allows for drainage when transporting wet products without changing the direction of the profile.
Z-Belt is formulated with PVG, a MOR moderate
oil resistant, fire retardant, static dissipative
compound, with environmental cold temperatures
resistance.
Z-Belt is excellent for conveying oily fertilizers,
wood products, grains, agricultural products,
and animal feeds. This unique design is used on
inclines, flat, troughed, and tubing conveying.
Part No.
Description
Price
201798
12” Replacement Belting
Call for pricing
201814
14” Replacement Belting
Call for pricing
201847
16” Replacement Belting
Call for pricing
201818
18” Replacement Belting
Call for pricing
201820
20” Replacement Belting
Call for pricing
201824
24” Replacement Belting
Call for pricing
25041518
Clipper Lacing - Uninstalled SS
Call for pricing
25051009
Nylon Covered Cable - In. SS
Call for pricing
25041518-1
Clipper Lacing - Installed
Call for pricing
Norway Bolts
The Norway bolts are made from stainless steel
and include a stainless steel nut. Flatwashers
and lockwashers are recommended but need to
be ordered separately. The unique Norway bolt
design allows the elevator bucket and leg belt to
be bonded tightly together.
Tapco Elevator Bucket
Tapco heavy duty elevator buckets are
injection molded from prime virgin
polyethylene. They are highly abrasion
resistant and will give and bend to pass by
obstructions. They are heat and cold resistant
and drilled for mounting to leg belting.
Leg Belting
FEI stocks top of the line leg belting. It is
super oil resistant, meeting OSHA and MSHA
application requirements. Maximum resistance
to oils and dust suppressants additives. It is also
static conductive and fire resistant. Improved
low temperature properties prevent pulley
slippage during cold weather start ups.
238
www.davisequip.com
•
Part No.
Description
Price
WA7000768
1/4” x 1” SS Norway Bolt
0.64
WA7000766
1/4” x 1 1/2” SS Norway Bolt
0.76
WAF90267
1/4” SS Flatwashers
0.06
WAF90272
1/4” SS Lockwashers
0.04
Part No.
Description
Price
WA7000781
Tapco Elevator Bucket-10x6
6.16
WA7003308
Tapco Elevator Bucket-11x6
7.21
WA3000394
Tapco Elevator Bucket-8x6
5.47
WA3000970
Tapco Elevator Bucket-9x5
5.21
WA3001155
Tapco Elevator Bucket-8x5
4.25
Part No.
Description
Price
WA7001526
11” Leg Belt Punched 11” O.C.
11.00
WA7001525
11” Leg Belt Punched 9” O.C.
11.55
WA7001524
11” Leg Belt Punched 8” O.C.
12.57
WA7001021
14” Splice
3.66
WA7001020
18” Splice
3.80
www.feieast.com
Waconia Accessories
Salem valves are used mainly in
Waconia tower systems. They are
made of 10 gauge mild steel or 12
gauge 304 stainless steel. Both have
a stainless steel basket and flanged
inlet. They also have two hole
flange bearings on each side of the
main shaft holding the basket. This
increases valve life under severe
working conditions.
The telescoping dust spout is a new and less expensive version
of the Dust Devil. It has a stainless steel upper spout section with
mounting holes. Six heavy duty buckets extend to 10’ 4” and collapses to 25”. It is shipped completely assembled for easy installation. The manual spout comes with a 1000# winch complete
with braided rope and pulleys. It ban be installed as a dust spout
on a tower system, load out conveyor or just to hang on existing
spouting, anywhere that dry fertilizer is loaded into rolling stock
where dust is an environmental concern.
Part No.
Stem Valves
Price
Part No.
Telescoping Dust Spout
Price
WA7003668
12” x 12” MS Salem Valve
441.00
WA7011440
Manual Dust Spout
1,150.00
WA7003671
12” x 12” SS Salem Valve
550.00
WA7011759
Manual Dust Spout Less Winch
1,207.50
WA7003673
10” x 10” MS Salem Valve
531.30
WA7011479
Electric Dust Spout
3,960.00
WA7003674
10” x 10” SS Salem Valve
500.00
Part No.
Options
Price
WA7011442
Adapter-SS for Load Out Conveyor
350.00
WA7011446
Adapter-SS for 8” Dia. Spout
258.27
WA7011448
Adapter-SS for 10” Dia. Spout
225.00
WA7011449
Adapter-SS for 12” Dia. Spout
225.00
Waconia spouting is 12 gauge mild steel or 14 gauge 304
stainless steel. Flanges are extra and can be welded on at
the factory for a nominal fee. Please specify your paint color
requirements to match your existing equipment on all spouting, elbows, etc. Spouting comes in 20 foot length but can be
cut to meet your specifications.
Part No.
Spouting
Price
WA7001489
8” Mild Steel Spouting
25.20
Waconia clamps and flanges are made of 12 gauge mild
steel or 14 gauge stainless steel. Flat and angle flanges
are available. The clamps are the deluxe 2 piece style
(which includes bolts and nuts) to make installation easy.
WA7001490
9” Mild Steel Spouting
42.00
WA7001491
10” Mild Steel Spouting
28.00
WA7001492
12” Mild Steel Spouting
36.00
WA7001493
8” Stainless Steel Spouting
71.44
WA7001494
9” Stainless Steel Spouting
90.00
WA7001495
10” Stainless Steel Spouting
92.00
WA7001496
12” Stainless Steel Spouting
121.53
WA7010188
Labor-Installing Flanges at Factory CALL
Waconia adjustable elbows are made of 12 gauge mild steel
with mild steel flanges, or 14 gauge stainless steel with stainless steel flanges. Center joint is 1” large than the inlet or outlet to allow better flow. Adjustable from 0˚ thru 45˚.
Part No.
Clamps and Flanges
Price
WA7001511
8” Mild Steel Clamp
15.75
WA7001513
10” Mild Steel Clamp
16.22
WA7001515
8” Stainless Steel Clamp
40.62
WA7001516
9” Stainless Steel Clamp
38.00
WA7001517
10” Stainless Steel Clamp
51.00
WA7001521
11” Stainless Steel Clamp
51.00
WA7001518
12” Stainless Steel Clamp
38.00
WA7001522
13” Stainless Steel Clamp
38.00
WA7001501
8” Mild Steel Angle Flange
CALL
10”Mild Steel Angle Flange
21.00
Part No.
Adjustable Elbows
Price
WA7001503
WA7200223
8” Mild Steel Elbow
241.50
WA7004336
8” Mild Steel Flat Flange
CALL
9” Mild Steel Flat Flange
CALL
WA7200225
9” Mild Steel Elbow
241.50
WA7001502
WA7007724
10” Mild Steel Elbow
262.50
WA7004337
10” Mild Steel Flat Flange
14.00
12” Mild Steel Flat Flange
CALL
WA7200228
12” Mild Steel Elbow
350.00
WA7001504
WA7200224
8” Stainless Steel Elbow
323.00
WA7001497
8” Stainless Steel Flat Flange
17.00
9” Stainless Steel Flat Flange
19.00
WA7200226
9” Stainless Steel Elbow
334.00
WA7001498
WA7200228
10” Stainless Steel Elbow
350.00
WA7001499
10”Stainless Steel Flat Flange
32.00
487.00
WA7001500
12”Stainless Steel Flat Flange
34.00
WA7200230
12” Stainless Steel Elbow
IA 800-747-8300
•
MN 800-736-3525
•
WI 800-588-7776
239

Similar documents

Series 14

Series 14 CONTROL PANEL I.D. PLATE (DRIVER SIDE) CONTROL PANEL I.D. PLATE (PASSENGER SIDE) CONTROL BOX HOOD & ARM ASSEMBLY ANTI-TILT PLATE PIN AND LINK ASSEMBLY CONTROL HANDLE BELL CRANK HANDLE CROSS ROD CON...

More information