panhead - GUTSCHROME

panhead
seAts &
sissY bArs
DS-0401
eXhAust
cArburetors
& Air filters
engine
trAnsmission
& DriVeline
gAskets
& seAls
electricAl
& lighting
1002-0025
SUpeR e ShORTY CaRBUReTOR KIT
•Kit includes an S&S Super E gas carburetor, S&S teardrop air cleaner assembly, manifold, mounting
hardware, fuel line, clamps, overflow line, one extra intermediate jet and two main jets, VOES tubing
hAnDlebArs, (when applicable), installation and jetting instructions
controls & •Super E has a 17/8” throat at the butterfly and a 19/16” venturi and is recommended for use on Big Twin
engines up to 100-cubic-inch
mirrors
•Carburetors only also available
cAbles
brAkes
NOTE: S&S Super E carburetor requires the use of a two-cable, pull open/pull close throttle assembly; S&S kits are compatible with stock cables
except as noted.
IMPORTANT NOTE: Recommended for racing only, this carburetor is not legal for use in California on motor vehicles operated on public
highways or in other states where similar pollution laws may apply. User must determine the suitability of the product for his or her use
and assumes all risk and liability in connection therewith.
PART #
DESCRIPTION
SUG. RETAIL
FOR 55-65 PANHEAD WITH STANDARD GAS TANKS
DS-04011
Complete kit with O-ring-style intake
PART #
DESCRIPTION
SUG. RETAIL
FOR 55-65 PANHEAD WITH STANDARD GAS TANKS (CONT)
$579.95
1002-0025
1
Repl. Super E carburetor only
$349.95
Modifications needed to oil lines on 63-65 models.
oil tAnks,
filters &
gAs tAnks
DAshes
& gAuges
1013-0004
1013-0005
chAssis,
suspension,
fenDers
& wheels
1013-0006
floorboArDs
& pegs
CaRBUReTOR SpaCeRS
hArDwAre
generAl
342
•Easy way to add extra torque
and horsepower
•Machined from solid 6061 T-6 billet aluminum
that completely eliminates porosity problems
•Machined finish can be polished to a
bright luster
•Made in the U.S.A.
hOTOp S&S enRICheneR
KnOB aSSeMBLY
•Replaces the stock S&S enrichener lever on
E and G carbs when changing to a different style air
cleaner assembly
•Retains the stock plunger and spring
•Setscrew allows progressive enrichment
•Kit includes a chrome knob and a brass plunger nut
•Made in the U.S.A.
PART #
DS-289138
DESCRIPTION
For 48-65 Panhead
PART #
DESCRIPTION
SUG. RETAIL
FOR S&S E & B SERIES CARBURETORS (17/8”)
SUG. RETAIL
$39.95
1013-0004
1013-0005
1013-0006
All pArt numbers in blue Are new for 2014.
1”
11/2”
2”
$33.95
39.95
39.95
PANHEAD
seats &
sissY bars
112923
eXhaust
Carburetors
& air filters
112903
engine
transMission
& DriVeline
gaskets
& seals
eleCtriCal
& lighting
hanDlebars,
Controls &
Mirrors
DS-289111
Cables
brakes
1003-0312
oil tanks,
filters &
gas tanks
Dashes
& gauges
DS-289113
REPLACEMENT PARTS FOR S&S CARBS
•Rebuild kits are available in master kits, body-only kits and accelerator pump kits
•Replacement gaskets, O-rings and components are made from the highest-quality materials available
FOR S&S CARBURETORS
PART #
DESCRIPTION
SUG. RETAIL (EA.)
REBUILD KITS
112923
112903
DS-289111
1003-0312
DS-289113
DESCRIPTION
SUG. RETAIL (EA.)
REPLACEMENT COMPONENTS (CONT)
Master rebuild kit Super E (body, accelerator pump,
fasteners, springs, idle mixture screw, seat and
needle assembly)
Rebuild kit for Super B (body rebuild kit)
Rebuild kit for Super E (body rebuild kit)
Rebuild kit for S&S E & G (basic)
Accelerator pump rebuild kit for E (diaphragm,
spring, check balls and springs, pushrod and
required hardware)
$80.95
40.95
40.95
31.95
1003-0041
1003-0042
1003-0043
1003-0044
1003-0045
1003-0047
1003-0050
1003-0052
19.95
REPLACEMENT COMPONENTS
DS-289935
DS-289933
112091
160491
160057
DS-289183
1050-0242
1003-0085
1003-0040
PART #
112084
Manifold to carburator O-ring, Super E (10-pk.)
Bowl gasket, Super E and G (10-pk.)
Bowl gasket, Super B and D (10-pk.)
1
/4” Insulator block w/ O-ring Super E
1” Spacer block Super E
Gas line insulator
19” gas line w/ 90° end
Idle mixture screw (5-pk.)
Idle mixture screw spring (10-pk.)
.95
2.95
1.95
20.95
37.95
10.95
5.95
7.95
.95
1003-0192
1003-0194
1003-0193
1003-0188
0706-0203
1003-0237
Bowl plug (5-pk.)
Needle: 17/8” E (ea.)
Bellows seal, accelerator pump (5-pk.)
Diaphragm spring, accelerator pump (10-pk.)
Accelerator pump diaphragm (ea.)
Fast idle plunger/enrichener (ea.)
Ball check spring (5-pk.)
Fuel inlet/seat for 17/8” E carb (uses needle
PART #1003-0042) (ea.)
Enrichment device for B series carb (will work on
Super E carbs when changing air cleaners) (ea.)
Accelerator pump ejector nozzle O-ring (10-pk.)
Accelerator pump check ball only (10-pk.)
Accelerator pump cap O-ring
(two required) (10-pk.)
Fuel bowl overflow hose per 24” (5-pk.)
Straight gas hose for use with the new S&S carbs
with 90° fuel inlet
Inlet, carb fuel swivel
all part nuMbers in blue are new for 2014.
$2.95
11.95
3.95
.95
13.95
11.95
1.95
Chassis,
suspension,
fenDers
& wheels
floorboarDs
& pegs
harDware
11.95
33.95
.95
.95
.95
3.95
5.95
22.95
general
343
panhead
seAts &
sissY bArs
eXhAust
ReBUILd KIT FOR
LInKeRT CaRB
ReBUILd KIT FOR
LInKeRT CaRB
•Kit includes foam float, needle
and seat, gaskets, springs
and bushings
cArburetors PART #
& Air filters 1003-0294
DESCRIPTION
For 48-65 Panhead
SUG. RETAIL
$38.95
•Includes all necessary
gaskets, seals
and O-rings
PART #
DS-289108
DESCRIPTION
For 48-65 Panhead
SUG. RETAIL
$14.95
engine
CaRBUReTOR
InSULaTOR BLOCK KIT
CaRBUReTOR InSULaTOR
BLOCK KIT
trAnsmission •Kit includes 3/8” fiber insulator
& DriVeline
block and gaskets
gAskets
& seAls
electricAl
& lighting
•Kit includes gaskets required when
converting a Linkert to a Bendix/Keihin carb
•Made in the U.S.A.
•Designed to reduce the risk of boiling
fuel in the carb
•Made in the U.S.A.
PART #
0935-0100
DESCRIPTION
For 48-65, carb to intake (Linkert);
repl. OEM #29250-55
SUG. RETAIL
PART #
0934-0945
$14.95
DESCRIPTION
For 48-65, carb to intake (Linkert to Bendix/
Keihin); repl. OEM #27411-40A
LInKeRT/BendIX CaRBUReTOR ThROTTLe LeVeR
WIRe BLOCK KIT
SUG. RETAIL
$7.95
2401-0651
•Kit includes Cadmium plated block; OEM #27450-36, screw, cotter pin and brass washers
•Available standard or +.005” over sized
hAnDlebArs, •Made in the U.S.A.
controls &
mirrors
PART #
DESCRIPTION
SUG. RETAIL
PART #
DESCRIPTION
SUG. RETAIL
FOR 49-65 PANHEAD (CONT)
FOR 49-65 PANHEAD
2401-0651
Standard
$11.95
2401-0652
+.005”
$11.95
cAbles
brAkes
oil tAnks,
filters &
gAs tAnks
DAshes
& gAuges
JeT KITS FOR S&S CaRBS
1003-0015
•For jetting most stock and performance engines
•Low-range kit contains one each of the following intermediate jets
(.025, .0265, .028, .0295) and one each of the following main jets (.062,
.064, .066, .068, .070, .072, .074)
•High-range kit contains one each of the following intermediate jets
(.0295, .031, .032. .033) and one each of the following main jets (.072,
.074, .076, .078, .080, .082, .084)
•Dealer jet kit contains three each of all intermediate jets (except PART
#s 1005-0008 and 1005-0009) and five each of all main jets (except PART
#s 1006-0233, 1006-0234, 1006-0235, 1006-0236, 1006-0237 and 1006-0238)
plus a main jet tool
•Replacement jets also available separately
chAssis,
suspension,
PART #
fenDers
JET KITS
& wheels
DESCRIPTION
1003-0015
DS-0450
DS-0451
Dealer jet kit
Low-range kit
High-range kit
DS-94025
DS-940265
DS-94028
DS-940295
DS-94031
DS-94032
DS-94033
1005-0008
1005-0009
.025 intermediate jet
.0265 intermediate jet
.028 intermediate jet
.0295 intermediate jet
.031 intermediate jet
.032 intermediate jet
.033 intermediate jet
.036 intermediate jet
.040 intermediate jet
7.95
7.95
7.95
7.95
7.95
7.95
7.95
7.95
7.95
$317.95
46.95
46.95
.040
.042
.044
.046
.048
7.95
7.95
7.95
7.95
7.95
MAIN JETS (5-PK.)
generAl
344
1006-0228
1006-0229
1006-0230
1006-0231
1006-0232
PART #
DS-0451
DESCRIPTION
SUG. RETAIL (EA.)
MAIN JETS (5-PK.) (CONT)
floorboArDs
INTERMEDIATE JETS (3-PK.)
& pegs
hArDwAre
SUG. RETAIL (EA.)
DS-0450
main
main
main
main
main
jet
jet
jet
jet
jet
1006-0233
1006-0234
1006-0235
1006-0236
1006-0237
1006-0238
DS-72062
DS-72064
DS-72066
DS-72068
DS-72070
DS-72072
DS-72074
DS-72076
DS-72078
DS-72080
DS-72082
DS-72084
.050
.052
.054
.056
.058
.060
.062
.064
.066
.068
.070
.072
.074
.076
.078
.080
.082
.084
main
main
main
main
main
main
main
main
main
main
main
main
main
main
main
main
main
main
All pArt numbers in blue Are new for 2014.
jet
jet
jet
jet
jet
jet
jet
jet
jet
jet
jet
jet
jet
jet
jet
jet
jet
jet
$7.95
7.95
7.95
7.95
7.95
7.95
7.95
7.95
7.95
7.95
7.95
7.95
7.95
7.95
7.95
7.95
7.95
7.95
panhead
seAts &
sissY bArs
1006-0012
Rd pReCISIOn MaIn JeTS
eXhAust
•Brass carburetor jets are high precision and flow-calibrated for
extremely accurate fuel flow rate
•Available in a range of sizes for Mikuni applications
•High-quality replacement; NOT original Mikuni jets
•Individual jet sizes sold in 4-pack to dealers, sold each to consumer
•Dealer kit includes a range of sizes also available
PART #
CArburetors
& Air filters
DESCRIPTION
SUG. RETAIL
DEALER KIT
1006-0012
PART #
1006-0018
1006-0019
1006-0020
1006-0021
1006-0022
1006-0023
1006-0024
1006-0025
1006-0026
1006-0027
4-pc. each jet sizes 72.5 through 160
JET SIZE
72.5
75
77.5
80
82.5
85
87.5
90
92.5
95
SUG. RETAIL
$2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
PART #
1006-0028
1006-0029
1006-0030
1006-0031
1006-0032
1006-0033
1006-0034
1006-0035
1006-0036
1006-0037
JET SIZE
97.5
100
102.5
105
107.5
110
112.5
115
117.5
120
engine
$353.95
SUG. RETAIL
$2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
PART #
1006-0038
1006-0039
1006-0040
1006-0041
1006-0042
1006-0043
1006-0044
1006-0045
1006-0046
1006-0047
JET SIZE
122.5
125
127.5
130
132.5
135
137.5
140
142.5
145
SUG. RETAIL
$2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
PART #
1006-0048
1006-0049
1006-0050
1006-0051
1006-0052
1006-0053
1006-0054
JET SIZE
147.5
150
152.5
155
157.5
160
170
SUG. RETAIL
$2.50
2.50
2.50
2.50
2.50
2.50
2.50
trAnsmission
& DriVeline
gAskets
& seAls
eleCtriCAl
& lighting
The ORIGInaL “pOWeR TUBe” aTOMIZeR
•Atomizer power tube is CNC-machined from brass for consistency and accuracy
•Converts fuel from a squirting liquid to a fine mist
•Eliminates spitting and popping through the carburetor
•Made in the U.S.A.
NOTE: Covered under the following U.S. patent #s:
5,233,180/5,562,868/5,662,836/5,810,
264/6,270,060.
PART #
DS-289120
hAnDlebArs,
Controls &
mirrors
DESCRIPTION
For 48-65 Panhead models w/ S&S B, D and E series carburetors
2401-0430
SUG. RETAIL
$47.95
CAbles
2401-0431
brAkes
BILLeT FLanGe
adapTeR FOR
SpIGOT-TYpe CaRBS
InTaKe pIpe nUTS,
SeaLS and nIppLeS
•Allows you to mount OEM late-model CV or Mikuni HSR-42 carbs on
Sportster, Panhead, Shovelhead or early Evolution with two-bolt
flange manifolds
•CNC-machined from 6061 billet aluminum
•Mounting holes are 2.75” on center
•Can be polished, plated or painted
•Carb-to-manifold seal also available; see GASKETS & SEALS section
•Made in the U.S.A.; sold each
PART #
DS-289219
DESCRIPTION
Billet flange adapter
SUG. RETAIL
$28.95
2401-0432
oil tAnks,
filters &
gAs tAnks
•Precision machined duplicates of original
intake manifold seals, nuts and nipples
•Made in the U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 48-54 PANHEAD
2401-0430
2401-0431
2401-0432
Cad-plated intake manifold nuts for O.H.V.
61”/74” engines; repl. OEM #27052-40
Brass intake manifold seals for O.H.V.
61”/74” engines; repl. OEM #27059-40
Intake manifold nipple for O.H.V. 74”
engines; repl. OEM #27039-48
DAshes
& gAuges
$45.95
ChAssis,
suspension,
fenDers
& wheels
19.95
16.95
floorboArDs
& pegs
InTaKe
ManIFOLd CLaMp
•Clamp is 3/4” wide and constructed
of .020” thick stainless
steel and use a curved 10-24
threaded “T”-bolt with plated steel aircraft-style hex locknut
•Sold each
•Made in the U.S.A.
InTaKe ManIFOLd
CLaMpS WITh O-RInGS
•Spring steel, chrome-plated clamp
assemblies with high-quality O-rings
•Sold in pairs
PART #
DS-203094
hArDwAre
DESCRIPTION
For 55-65 Panhead; repl. OEM #s 27063-57
and 27060-55
SUG. RETAIL
$20.95
PART #
1013-0043
DESCRIPTION
For 55-65 Panhead with O-ring-style
cylinder heads; repl. OEM #27063-57
All pArt numbers in blue Are new for 2014.
generAl
SUG. RETAIL (EA.)
$10.95
345
panhead
seAts &
sissY bArs
eXhAust
CaRBUReTOR BOWL
LOCK nUT KIT
cArburetors
& Air filters
engine
•Includes copper gasket, nut
and lock washer
•Cad-plated
•Made in the U.S.A.
adJUSTaBLe CaRBUReTOR
SUppORT BRaCKeT
•Adjusts from 51/4” to 63/8”
•Mounts from the center case bolt between cylinders to the lower
flange mount of the manifold
•Made in the U.S.A.
trAnsmission
PART #
& DriVeline
DESCRIPTION
For 48-65 Panhead
160471
PART #
2401-0505
DESCRIPTION
For 48-65 Panhead; repl. OEM #27375-29,
27376-28, 7045, 7793
SUG. RETAIL
$13.95
SUG. RETAIL
$16.95
gAskets
& seAls
2401-0501
electricAl
& lighting
‘TeaRdROp’
aIR CLeaneR
aSSeMBLY
2401-0500
hAnDlebArs,
controls &
mirrors
•Made from chrome-plated cast aluminum
•Ribbed style; measures 8” x 4.5” x 2”
•Include mini air filter and required hardware
•Made in the U.S.A.
2401-0504
PART #
1010-0710
cAbles
DESCRIPTION
For S&S Super E and G carbs
SUG. RETAIL
$166.95
2401-0503
brAkes
oil tAnks,
filters &
gAs tAnks
DAshes
& gAuges
CaRBUReTOR
SUppORT BRaCKeTS
•Exact reproduction of the original H-D
support brackets
•Used to support the Linkert carburetor
•Made in the U.S.A.
PART #
2401-0500
2401-0501
2401-0503
2401-0504
DESCRIPTION
For 48-53 O.H.V. Big Twin
For 54-65 O.H.V. Big Twin
For 48 Big Twin
For 48-52 45 Solo
OEM #
27431-41
27431-41B
1110-39
27432-36
SUG. RETAIL
$10.95
12.95
8.95
6.95
1011-2663
chAssis,
suspension,
fenDers
& wheels
floorboArDs
& pegs
hArDwAre
generAl
346
CUSTOM aIR
CLeaneR aSSeMBLIeS
FLOaT BOWL
Speed SCReW KIT
•Electropolished stainless
steel for a great
custom look
•Will not corrode in
extreme climates
•Longer and stronger than
the stock screws, makes them easier to handle; will not round off
•5/16” hex head design eases bowl removal and jet changing
•Made in the U.S.A.
PART #
1050-0160
DESCRIPTION
For 48-65 Panhead with S&S E carbs
SUG. RETAIL
$34.95
1011-2664
•Increases horsepower with proper carburetor calibration
•Pleated media provides a large filtration area offering long
service intervals
•Multi-layers of woven cotton gauze media offers excellent filtration
•Mount directly to the carburetor
•Designed to fit most Panhead models equipped with
various carburetors
•Made in the U.S.A.
PART #
1011-2663
1011-2664
DS-289057
DESCRIPTION
For Bendix-Tillotson carbs to 75
For Linkert early 4-bolt model carbs
Repl. filter
All pArt numbers in blue Are new for 2014.
SUG. RETAIL
$91.95
92.95
45.95
PANHEAD
SeaTS &
SISSY BarS
eXhauST
DS-289130
1014-0133
UNIVERSAL
STEALTH AIR
CLEANER KIT
AIR CLEANER AND COVERS
•Original S&S chrome teardrop air cleaner assembly
•Includes an S&S cover, backing plate and
high-quality filter element and hardware kit
•Increase horsepower with no other changes
•Made in the U.S.A.
NOTE: Covers may need to be notched when used with
custom or 5-gallon or larger fuel tanks.
NOTE: Installation of an S&S air cleaner may require re-jetting.
PART #
1014-0040
DESCRIPTION
SUG. RETAIL
AIR CLEANER ASSEMBLY FOR S&S CARBURETORS
DS‑289130
For E & G series carbs on 48-65 Panhead
$239.95
REPLACEMENT PARTS
DS‑289404
DS‑289403
1014‑0133
1014‑0040
1011‑1721
Repl. S&S air cleaner cover for E & G carb
Repl. S&S air cleaner cover for S&S CV and Super B carbs
Black wrinkle finish repl. S&S air cleaner cover for E & G carbs
Chrome Slasher-style air cover; repl. standard cover for all
E & G carb kits
Repl. filter element for PART #DS-289130
143.95
143.95
121.95
143.95
18.95
CarBureTOrS
& aIr FILTerS
1010-1313
•Stealth’s design incorporates a directional stinger that
directs incoming airflow toward the carburetor’s venturi
•Increased performance
•Perfect addition to a performance exhaust system
•Filter element can be cleaned and reused
•Kit includes backplate, air filter, all necessary mounting
hardware and complete instructions
•Made in the U.S.A.
NOTE: Kit does not come with covers. Can be used with
S&S Stealth air cleaner covers
(sold separately).
SUG.
PART #
1010‑1313
1011‑3119
1011‑3120
DESCRIPTION
For 48-65 Big Twin w/ Super E or G carb
Standard stealth air filter for S&S
Universal Stealth Air Cleaner Kit
1” tall stealth air filter for S&S
Universal Stealth Air Cleaner Kit
eNGINe
TraNSMISSION
& drIVeLINe
GaSKeTS
& SeaLS
RETAIL
$129.95
24.95
eLeCTrICaL
& LIGhTING
24.95
haNdLeBarS,
CONTrOLS &
MIrrOrS
CaBLeS
1014-0119
1014-0116
1014-0120
1014-0117
STEALTH AIR CLEANER COVERS
•Fit the S&S Universal Stealth air cleaner kit
•Bob and Muscle style air cleaner covers are machined from billet
aluminum and fit over the end of the air filter, leaving the filter
element exposed
•Air Stream-style is die-cast and features screened vents for more
air without sucking in rain/road hazards
•Muscle-style features muscle car-style hood pins
•Made in the U.S.A.
PART #
1014‑0116
1014‑0117
1014‑0118
1014‑0119
1014‑0120
DESCRIPTION
Air Stream, chrome
Air Stream, black wrinkle powder-coat
Bob dish, chrome
Bob dish, black wrinkle powder-coat
Bob dome, chrome
SUG. RETAIL
$139.95
139.95
94.95
94.95
94.95
BraKeS
OIL TaNKS,
FILTerS &
GaS TaNKS
1014-0122
1014-0165
PART #
1014‑0121
1014‑0122
1014‑0123
1014‑0165
DESCRIPTION
Bob dome, black wrinkle powder-coat
Muscle, chrome
Muscle, black wrinkle powder-coat
Muscle, black wrinkle powder-coat w/ logo
daSheS
& GauGeS
SUG. RETAIL
ChaSSIS,
$94.95
SuSPeNSION,
129.95
FeNderS
129.95
& wheeLS
99.95
FLOOrBOardS
& PeGS
hardware
HYPERCHARGER™ AIR CLEANER
•This air cleaner looks great and works even better
•Outstanding performance on stock or mildly modified engines
up to 90 horsepower
•Available with a standard (smooth) trapdoor design and
chrome butterflies
•Provides excellent legroom for comfort while riding
PART #
1010‑0229
DESCRIPTION
For 48-65 Panhead with S&S B series carb
GeNeraL
SUG. RETAIL
$199.99
aLL ParT NuMBerS IN BLue are New FOr 2014.
347
PANHEAD
seats &
sissY bars
eXHaust
BIRD DEFLECTOR
•Original Randy Smith design; this was one of Randy’s first products,
made from polished cast aluminum the way he originally made them
•Prevents your pant leg from being sucked into the open venturi on an old brass Linkert carb
Carburetors •Made in U.S.A.
& air filters
PART #
1014-0090
DESCRIPTION
Bird deflector
SUG. RETAIL
$65.95
eNGiNe
traNsMissioN
& DriVeliNe
REUSABLE AIR FILTERS
GasKets
& seals
SMOOTH-STYLE
CARBURETOR COVER
eleCtriCal
& liGHtiNG •Teardrop-style design
•Comes without element
•Available in chrome finish
HaNDlebars, •Made in the U.S.A.
CoNtrols &
Mirrors
PART #
1015-0099
DESCRIPTION
For 48-65 Panhead
w/ S&S carburetor
SUG. RETAIL
$87.95
SUG. RETAIL
$31.95
31.95
31.95
HIGH-FLOW
REPLACEMENT
AIR FILTERS
DS-289502
DS-289514
•Designed to increase
horsepower and torque
•Pleated media provides a large filtration
area offering long service intervals
•Multi-layers of woven cotton gauze
media offers excellent filtration
•Application-specific sealing bead ensures an airtight fit
•Original K&N High-Flow Technology
•American-made for over 40 years
DS-289504
AIR FILTER ELEMENTS
•Top-quality replacement air filter elements from
Uni, the OEM supplier to Harley-Davidson
•Constructed of a unique, open-cell polyurethane
material that allows maximum airflow while still
providing superior filtration
•Sold individually
•Made in the U.S.A.
CHassis,
susPeNsioN, YEAR MODEL
FOR PANHEAD
feNDers
48-65 74”, 45”
& WHeels
YEAR MODEL
PART #
OEM #
SUG.
RETAIL
E-2470
29036-41
$46.95
E3226
-
47.95
E-3225
-
47.95
FOR AFTERMARKET AIR CLEANERS
PART #
OEM #
SUG.
RETAIL
DS-289502
29036-41
$19.95
S&S Super E series carb air filter; 2.5”
DS-289514
S&S old style teardrop-shaped housing;
6” x 23/16”air filter
DS-289504
Drag 7” round air filter (DS-288998)
DS-289504
E-2470
FOR PANHEAD
48-65 74”, 45”
S&S Super E series carb air filter; 21/2”
S&S old style teardrop-shaped housing;
6” x 23/16” air filter
1010-1034
FOR AFTERMARKET AIR CLEANERS
floorboarDs
& PeGs
1011-0315
MODEL
S&S “D” teardrop air filter; K&N reference #E-3224
S&S 6” x 2 3/16” air filter; K&N reference #E-3225
S&S Super E and G series carb air filter; K&N reference #E-3226
braKes
DasHes
& GauGes
1011-0314
NOTE: For cleaner use PART #3704-0044; For oil use PART #3610-0013.
PART #
1011-0313
1011-0314
1011-0315
Cables
oil taNKs,
filters &
Gas taNKs
1011-0313
•Durable epoxy-coated wire mesh designed
to maximize airflow and provide peak filtration
•100% reusable and washable
•High-flow four-layer surgical-grade cotton filtration
•Urethane body that won’t crack or curl like rubber
•Precision hand-poured design
•Made in the U.S.A.
-
18.95
-
18.95
18.95
1010-1033
HarDWare
VELOCITY STACKS
VELOCITY STACK PRE-FILTER
GeNeral
348
•Compatible with all RSD velocity stacks
•Also fits on any 33/4” velocity stack
•Hydrophobic manufacturing process repels water
•Filters out larger particles of debris down to .005”
•Uniform micron openings allows air in
while keeping debris
PART #
DESCRIPTION
and water out
1011-2763
Velocity stack pre-filter
•Made in the U.S.A.
•CNC machined from billet aluminum
•Bolts directly to S&S Super E or G carb
•No backing plate required
•Chrome bolts and gasket included
•Made in U.S.A.
PART #
DESCRIPTION
SUG. RETAIL
FOR 48-65 PANHEAD W/ S&S SUPER E/G CARB
SUG. RETAIL
$19.95
1010-1033
1010-1034
Black
Chrome
all Part NuMbers iN blue are NeW for 2014.
$189.95
199.95