INCANDESCENT LAMPHOLDERS - Etlin

Part_A_Part_A.qxd 11-12-13 10:57 AM Page 1
1850 Wilson Avenue, Toronto,
Ontario, Canada, M9M 1A1
Ph: 416-741-7336 Fax: 416-741-9104
SECTION I
INCANDESCENT
LAMPHOLDERS
I1
Etlin-Daniels reserves the right to discontinue, modify designs and change specifications without incurring obligation.
While every effort is made to ensure that descriptions, specifications and other information in this catalogue are correct,
no warranty is given in respect thereof and the company shall not be liable for any error herein.
Copyright © 2011 Etlin-Daniels
I2
I3-I6
I7
I8
I9
I10-I16
I17
I18-I19
I20
I21-I22
I23
I24
I25-I26
I27
I28
I28-I32
I32
I33
I34
I35
I36-137
I38
I39
I40
INCANDESCENT LAMPHOLDERS
Candelabra Base Lampholders
IS101, IS102, IS103
Candelabra Outer Threaded Lampholders
IS104, IS104S, IS104F, IS05, IS104-PS Candelabra Lampholders
IS105. IS106, IS107
Candelabra Euro Style Phenolic Lampholders
NLS
Candelabra Lampholders with Snap In Clips
Intermediate Base Lampholders
IS115, IS272
Phenolic Intermediate Lampholders
Medium Base Lampholders
IS201, IS211
Phenolic/Porcelain Keyless Lampholders
IS2209, IS2210
Porcelain Keyless Lampholders
IS212, IS213, IS242, IS243, IS245
Phenolic/Porcelain Snap In Lampholders
IS241, IS241P, IS241F, IS240
Outer Threaded Lampholders
IS292, IS313, IS322, IS309, IS1501
Sign Receptacles, Cleat Angle Pan, Lampholders
IS509, IS510, IS511
Porcelain Side Outlet, Twin Keyless Lampholders
ISP Series
Phenolic and Metal Caps for Lampholders
IS215, IS235
Phenolic Two and Three Light Cluster for Lampholders
IS270, IS270-1, IS276
Medium Base Adapters and Extensions
IS271, Curio Light
Medium Base Special lampholders for cabinetry and furniture
Pulse Rated HID Lampholders
IS267S, IS268, IS4221, IS4225, IS4226 Medium and Mogul Base Lampholders
Medium Base Table Lamp Sockets
IS216, IS218
Bottom Turn Lampholders
IS219I, IS2301, IS25X Series
Interior Mechanisms
IS219M, IS230M, IS25X-M Series
Metal Shell Lampholders
IS219P, IS230P, IS25X-P Series
Phenolic Shell Lampholders
Miscellaneous Medium Base Lampholders and Adapters
IS26X Series
Ceiling and Surface Porcelain and Phenolic Lampholders
IS513, IS514, IS515
Weatherproof Medium Base Lampholders
IS278, IS279, IS280, IS281
Socket Reducer Adapter
IS283, IS284, IS285, IS286
Socket Adapters and Current Taps/Lampholders
Part_A_Part_A.qxd 11-12-13 10:57 AM Page 2
Candelabra
Base
I2
CANDELABRA BASE LAMPHOLDERS
PHENOLIC WITH OUTER THREADED BODY
IS101 Threaded Body With Shoulder (End)
IS102 Threaded Body With Shoulder (Feed Thru)
IS103 Threaded Body Without Shoulder
1/2”
Base
Diameter
US
E-12
13/32
(10.32)
1/2(12.7)
.722(18.34)
.728(18.49)
13/32
(10.32)
ACROSS
FLATS
1-7/32
(30.96)
.805(20.45)
.815(20.7)
DIA.
1(25.4)
23/32
(18.26)
• Outer threaded phenolic body with special locking
features to prevent body halves from misaligning
• Molded skeleton type screw shell
• Specify lead type, length and stripping
• 75W, 125V
C
• Sockets can be supplied with various hickeys and
brackets
• Can be supplied with phenolic rings in Black, Brown,
Brass or Silver Plated, or Die Cast Brass or Silver
• c UL us Listed.
L
D
F
E
AxN=AN
L
A
D
F
To order harness sets of two or more sockets:
• Specify the style and number of socket pieces
• Centre-to-centre distance between sockets
(2" minimum) and free end length
AxN=AN
A
E
• Wire type, colour and strip length
• Style and colour of finishing nut
Incandescent
Angle Brackets For IS103 Series
ANGLED BRACKETS
BRACKET
NUMBER
A
B
HOLE
701
703
705
707
709
1-3/16"
1-11/32"
1-13/32"
1-11/16"
1-7/8"
5/8"
1/2"
5/8"
5/8"
1/2"
0.150"
0.189"
0.150"
0.150"
0.189"
WIDTH
B
A
701
0.342"
Snap Spring For IS103 Series
BRACKET
NUMBER
SNAP-IN CLIP
A
A
721
1-1/2"
721
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_A_Part_A.qxd 11-12-13 10:57 AM Page 3
Candelabra
Base
CANDELABRA BASE
PHENOLIC LAMPHOLDERS
1/2”
Base
Diameter
IS104 Series Skeleton Screw Shell, Straight Body
IS104-S Series Full Screw Shell, Straight Body
IS104-X Series Skeleton Screw Shell, Octagonal Flanged Body
I3
E-12
A
0.669"
A
• Standard is IS104 Series
• Has skeleton type contacts in molded phenolic
threaded body riveted to bracket
• 75W, 125V
• Standard leads are 18 AWG 105°C, AWM-TEW plastic wire
• SPT-1 wire available upon request
• Specify length and wire type when ordering
1-7/32"
0.709"
• On hickey or bracket with holes, leads are pulled
through unless otherwise specified
• IS104-S Series has aluminum screw shell with the
same features as the IS104 Series
• IS104-X Series has octagonal flange which allows easy
installation in deep cups
• UL Listed & CSA Certified
Brackets For IS104, IS104S & IS104X Series
DIMENSION
A
600 N
601 N
601
603 N
603
605 N
605
607 N
607
609 N
611 N
611
613
615
617 N
617
618
619 N
619
621 N
621
622
623 N
623
625 N
625
627 N
627
629 N
629
631
633
635
635 N
638
640
1-15/32"
1-1/2"
1-1/2"
1/5/8"
1/5/8"
1-11/16"
1-11/16"
1-3/4"
1-3/4"
1-7/8"
2"
2"
2-11/16"
2-1/4"
2-1/2"
2-1/2"
2-3/4"
2-7/8"
2-7/8"
3"
3"
3-1/8"
3-1/2"
3-1/2"
3-29/32"
3-29/32"
4"
4"
4-1/2"
4-1/2"
4-3/4"
4-7/8"
5"
5"
6"
8"
DESCRIPTION OF
MOUNTING HOLE
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
IPS NIPPLE
IPS NIPPLE
IPS TAP EXTRUSION
IPS NIPPLE
IPS TAP EXTRUSION
IPS NIPPLE
IPS TAP EXTRUSION
IPS NIPPLE
IPS TAP EXTRUSION
IPS NIPPLE
IPS NIPPLE
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS NIPPLE
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS NIPPLE
IPS TAP EXTRUSION
IPS NIPPLE
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS NIPPLE
IPS TAP EXTRUSION
IPS NIPPLE
IPS TAP EXTRUSION
IPS NIPPLE
IPS TAP EXTRUSION
IPS NIPPLE
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS NIPPLE
IPS TAP EXTRUSION
IPS TAP EXTRUSION
SINGLE LEG HICKEYS
FEMALE
HICKEY
A
Incandescent
BRACKET
NUMBER
MALE NIPPLE
HICKEY
A
SNAP-IN
CLIP TYPE
HICKEY
1-1/2"
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_A_Part_A.qxd 11-12-13 10:57 AM Page 4
Candelabra
Base
I4
CANDELABRA BASE
PHENOLIC LAMPHOLDERS
Brackets For IS104, IS104S & IS104X Series
TWO LEG
HICKEY
STRAIGHT
BRACKET
A
A
BRACKET
NUMBER
DIMENSION
A
651 S
653 N
655 S
657 S
1-1/2"
2"
3"
3-7/8"
DESCRIPTION OF
MOUNTING HOLE
1/8"
1/8"
1/8"
1/8"
IPS TAP EXTRUSION
IPS NIPPLE
IPS TAP EXTRUSION
IPS TAP EXTRUSION
BRACKET
NUMBER
670
671
673
“Z” TYPE
BRACKET
SNAP-IN
BRACKET
DIMENSION
A
DESCRIPTION OF
MOUNTING HOLE
1-3/4"
1-15/16"
2"
QUICK HICKEY
QUICK HICKEY
QUICK HICKEY
B
A
Incandescent
A
BRACKET
NUMBER
DIMENSION
A
691
692
693
2"
2-3/8"
3"
ANGLE
BRACKET
BRACKET
NUMBER
A
B
MOUNTING HOLE
661
1-7/8"
1/2"
0.126"
DESCRIPTION OF
SPECIAL
BRACKET
B
A
B
BRACKET
NUMBER
A
B
DESCRIPTION OF
MOUNTING HOLE
681
683
684
2-3/4"
2-5/32"
2-7/8"
13/32"
13/32"
3/4"
0.110"
0.134"
0.142"
BRACKET
NUMBER
A
B
MOUNTING HOLE
665
1"
25/32"
0.126"
DESCRIPTION OF
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_A_Part_A.qxd 11-12-13 10:57 AM Page 5
Candelabra
Base
CANDELABRA BASE
PHENOLIC LAMPHOLDERS
1/2”
Base
Diameter
IS05 Series Candelabra Lampholder With Screw Terminals
I5
C
US
E-12
OAH
1-27/64"
39/64"
13/16"
•
•
•
•
High heat phenolic body
Aluminum screw shell standard
25
⁄32" diameter over insulating lining
Available with brackets listed below
•
•
•
•
Snap-on paper liner per UL Standard 1571
With #6-32, 3⁄8" head terminal screws backed out
75W, 125V
c UL us Listed.
One Leg Hickey For IS-05 Series
BRACKET
NUMBER
A
DESCRIPTION OF
MOUNTING HOLE
761
763
764
4-1/16"
4-1/8"
3-7/8"
1/8" IPS TAP EXTRUSION
QUICK HICKEY
1/8" IPS TAP EXTRUSION
TYPE
SINGLE LEG HICKEY
INWARD EXTRUSION
A
INWARD
INWARD
Two Leg Hickey For IS-05 Series
A
771
772
773
774
775
776
777
778
779
780
781
1-23/32"
1-25/32"
2-3/16"
3-1/16"
4"
4-5/32"
3-15/16"
2-1/8"
3-51/64"
1-15/16"
4"
DESCRIPTION OF
MOUNTING HOLE
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
TYPE
OUTWARD
OUTWARD
OUTWARD
INWARD
OUTWARD
OUTWARD
OUTWARD
OUTWARD
INWARD
OUTWARD
INWARD
DOUBLE LEG HICKEY
OUTWARD EXTRUSION
A
DOUBLE LEG HICKEY
INWARD EXTRUSION
A
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Incandescent
BRACKET
NUMBER
Part_A_Part_A.qxd 11-12-13 10:57 AM Page 6
Candelabra
Base
I6
IS05-751
CANDELABRA BASE
PHENOLIC LAMPHOLDERS
1/2”
Base
Diameter
Series Candelabra Lampholder
With Two Leg Adjustable Hickey
C
US
C
US
E-12
3 1/2" - 4 3/4"
0.787" 20mm
• Two leg adjustable hickey
• Dimension "A" adjustable from 31⁄2" to 43⁄4" simply
by loosening two screws on the slotted legs and
tightening at the required height
• Has 1⁄8" IPS tap inward extrusion
• 75W, 125V
• c UL us Listed
1/2”
Base
Diameter
IS104-PS Series Candelabra Porcelain Lampholder
With Two Leg Hickey
E-12
A
Part No
IS104-PS
IS104-PS2
A
1.97” (50.0)
1.81” (46.0)
Incandescent
0.708" 18mm
• Hi heat porcelain body with phenolic insulating cover
• Screw terminals for wiring
• Solid screw shell
• Overall height 2" (50mm)
• Has 1⁄8" IPS tap inward double leg hickey
• c UL us Listed
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Candelabra
Base
EUROSTYLE
CANDELABRA LAMPHOLDERS
IS105
1/2”
Base
Diameter
Euro Style Phenolic Candelabra
with Smooth Shell
I7
C
US
E-12
• Phenolic body
• Smooth shell to fit into cup
• 1⁄8" IPS molded internal thread for mounting
• Terminal: Screwless push-in terminals, suitable for
#18AWG wire 12mm solder-dipped
• Available with set screw on base to hold on to
IS106
the 1⁄8" IPS pipe
• Ratcheting locking base once assembled, will not come
apart without depressing the lock release
• Rated 75W 125W
1/2”
Base
Diameter
Euro Style Phenolic Candelabra with Full
OuterThread and Phenolic Shade Ring
C
US
E-12
IS107
Euro Style Phenolic Candelabra with Half
Outer Thread and Phenolic Shade Ring
1
⁄8"
IPS pipe
• Ratcheting locking base once assembled, will not come
apart without depressing the lock release
• Rated 75W 125W
1/2”
Base
Diameter
C
Incandescent
• 3 piece phenolic body, base, cap and shell
• Smooth shell to fit into cup
• 1⁄8" IPS molded internal thread for mounting
• Terminal: Screwless push-in terminals, suitable for
#18AWG wire 12mm solder-dipped
• Available with set screw on base to hold on to the
US
E-12
• 3 piece phenolic body, base, cap and shell
• Half outer thread on the body and shade ring are used
to assemble a glass or reflector to the body
• 1⁄8" IPS molded internal thread for mounting
• Terminal: Screwless push-in terminals, suitable for
#18AWG wire 12mm solder-dipped
• Available with set screw on base to hold on to the
1
⁄8" IPS pipe
• Ratcheting locking base once assembled, will not come
apart without depressing the lock release
• Rated 75W 125W
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_A_Part_A.qxd 11-12-13 10:57 AM Page 8
Candelabra
Base
I8
CANDELABRA BASE LAMPHOLDERS
PHENOLIC WITH SNAP-IN CLIPS
1/2”
Base
Diameter
NLS-1 Series Candelabra Snap-In Mount
C
US
E-12
1-1/4"
1-37/64
7/8"
0.768"
1-15/32"
•
•
•
•
Phenolic body with flared opening, outside diameter ⁄32"
Full brass screw shell
Spring tempered steel clips hold socket firmly in place
Snaps into 1" diameter hole in 1⁄16" panel
NLS-1F
25
• Height of socket from panel is 1" high
• Standard leads are TEW or SPT-1, please specify type,
colour, length and stripping
• 75W, 125V
• c UL us Listed
1/2”
Base
Diameter
Candelabra Snap-In Mount
C
US
E-12
Incandescent
• Phenolic body with flared opening, outside diameter 25⁄32"
• Has skeleton type contacts in molded phenolic
threaded body riveted to bracket
• Spring tempered steel clips hold socket firmly in place
• Snaps into 1" diameter hole in 1⁄32" to 1⁄8" thick panel
1-7/16"
1"
25/32"
• Standard leads are TEW or SPT-1, please specify type,
colour, length and stripping
• 75W, 125V
• c UL us Listed
1/2”
Base
Diameter
NLS-1F 6SPT1SW24F Assembled Socket & Cord
With In-Line Switch for
Ceramic Industry
C
US
E-12
Socket snaps into 1" Dia. hole
In line on-off switch
Polarized SPT-1 cord
• Pre-assembled snap-in socket with feed through in-line
ON-OFF switch on 6’ SPT-1 cord,with polarized male plug
• Ideal for illuminating ceramic handicrafts
• Available in many different lengths, switch locations
and free ends; contact the factory for ordering
information
• Simply snap in to 1" diameter hole in 1⁄32" to 1⁄8" thick panel
• c UL us Listed
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_B_Part_B.qxd 11-12-13 11:19 AM Page 1
Intermediate
Base
INTERMEDIATE KEYLESS LAMPHOLDERS
21/32”
Base
Diameter
IS115 Phenolic Intermediate Base Lampholder
I9
C
US
1.35"
E-17
A
Part No.
A
IS115-01
1.77” (45.0)
IS115-02
1.89” (48.0)
IS115-03
2.56” (65.0)
0.96"
• Phenolic intermediate base lampholder
• Has skeleton type screw shell
• The unit is supplied with wire leads, please specify wire
length, type and end stripping
IS272
Keyless Two Piece Phenolic
Intermediate Lampholder
• Also available with push-in terminals for adding
your own leads
• Various brackets and hickeys are available
• c UL us Listed
21/32”
Base
Diameter
C
US
E-17
• Provided with two tapped #6-32 holes on 11⁄2" centres
for mounting
• For maximum 40 Watt Type "S" Lamp
• c UL us Listed
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Incandescent
• High heat phenolic body
• Brass screw shell riveted to body
• White or Silver painted reflector, which tightens
on screw shell
• Concealed #6-32 terminals backed out for quick wiring
Part_B_Part_B.qxd 11-12-13 11:19 AM Page 2
Medium
Base
I10
MEDIUM BASE KEYLESS LAMPHOLDERS
1”
Base
Diameter
IS201 Series Phenolic Keyless Lampholders
E-26
3/8"
1-23/64"
1-1/2"
B
1-1/4"
• High heat phenolic body
• Aluminum screw shell is standard, brass or nickel-plated
copper available to order
• Standard leads are 18 AWG, EXL 125°C, 12" long,
stripped 1⁄2" or specify desired length and type of wire
• Also available less leads with eyelets for soldering
• The above series are designed to accommodate a wide
variety of hickeys or brackets, which can be ordered
from the following pages.
• Insulating fibre cover or cap can be attached upon request
• Also available with ground wire
• Many configurations are available, as well as many
mounting options
• Can be harnessed together for many applications, such
as bathroom strips or showcase lighting, etc.
• White Urea lampholders are available to order
• 660W,250V
• UL Listed & CSA Certified
1”
Base
Diameter
IS275 Series Phenolic Keyless Lampholders
With Screw Terminals
TERMINAL SCREWS (2)
B
1.418"
1-23/64"
Incandescent
E-26
1-1/4"
• High heat phenolic body
• Aluminum screw shell is standard, brass or nickelplated copper available to order
• The above series are designed to accommodate a wide
variety of hickeys or brackets, which can be ordered
from the following pages.
• Insulating fibre cover or cap can be attached upon
request
• 660W, 250V
• UL Listed & CSA Certified
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_B_Part_B.qxd 11-12-13 11:19 AM Page 3
Medium
Base
PHENOLIC/PORCELAIN LAMPHOLDERS
KEYLESS, MEDIUM BASE
1”
Base
Diameter
IS211 Series Porcelain Keyless Lampholders
I11
E-26
1-15/32"
137/16"
1-3/8"
3/8"
1-3/8"
1-3/8"
IS211
• Unglazed porcelain body with wireways
• Available with deep wire well to meet UL AP
requirements, specify part number IS211AP
• Aluminum screw shell is standard, brass or nickelplated copper available to order
• Standard leads are 18 AWG, EXL 125°C, 12" long,
stripped 1⁄2" or specify desired length and type of wire
• The above series are designed to accommodate a wide
variety of hickeys or brackets, which can be ordered
from the following pages.
11/32"
B
5/32"
1-37/64"
B
IS211AP
• Insulating fibre cover or cap can be attached upon
request
• Also available with ground wire
• Many configurations are available, as well as many
mounting options
• 660W, 250V
• UL Listed & CSA Certified
1”
Base
Diameter
IS211T Series Porcelain Keyless
Lampholders With Screw Terminals
E-26
0.53"
1.98"
1.50"
AA02100AA
1.40"
• Unglazed porcelain body with wireways
• Aluminum screw shell is standard, brass or nickelplated copper available to order
• With screw terminals – for wiring
• The above series are designed to accommodate a wide
variety of hickeys or brackets, which can be ordered
from the following pages.
• Insulating fibre cover or cap can be attached upon
request
• Many configurations are available, as well as many
mounting options
• 660W, 250V
• UL Listed & CSA Certified
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Incandescent
NPSF1/8-27T.P.I
Part_B_Part_B.qxd 11-12-13 11:19 AM Page 4
Medium
Base
I12
Hickeys and Brackets For IS201 & IS211 Series
BRACKET
NUMBER
Incandescent
PHENOLIC/PORCELAIN LAMPHOLDERS
KEYLESS, MEDIUM BASE
01
01 N
01 NS
01 RS
01 S
02
02 N
02 RS
02 S
03 RS
04
04 N
04 RS
04 S
05
05 N
05 NS
05 RN
05 RS
06
06 N
06 RN
06 RS
07 N
08
08 N
09
09 N
10
10 S
10 N
11
12
13
14
15 N
16 N
16 S
17 S
18 N
DESCRIPTION OF
MOUNTING HOLE
B
1/2"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
5/8"
5/8"
11/16"
3/4"
3/4"
3/4"
3/4"
1"
1"
1"
1"
1"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-3/8"
1-1/2"
1-1/2"
1-3/4"
1-3/4"
2"
2"
2"
2-1/8"
2-1/2"
2-3/4"
3"
3-1/2"
7/8"
7/8"
2-7/32"
29/64"
1/8"
1/8"
1/8"
1/4"
1/8"
1/8"
1/8"
1/4"
1/8"
1/4"
1/8"
1/8"
1/4"
1/8"
1/8"
1/8"
1/8"
1/4"
1/4"
1/8"
1/8"
1/4"
1/4"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
IPS TAP EXTRUSION
IPS NIPPLE
IPS NIPPLE
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS NIPPLE
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS NIPPLE
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS NIPPLE
IPS NIPPLE
IPS NIPPLE
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS NIPPLE
IPS NIPPLE
IPS TAP EXTRUSION
IPS NIPPLE
IPS NIPPLE
IPS NIPPLE
IPS TAP EXTRUSION
IPS NIPPLE
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS NIPPLE
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS NIPPLE
IPS NIPPLE
IPS TAP EXTRUSION
IPS TAP EXTRUSION
IPS NIPPLE
STRAIGHT
FEMALE
HICKEY
STYLE 01. 02,03
B
MALE
NIPPLE
HICKEY
STYLE 01N, 02N, 03N
B
SLANTED
FEMALE
HICKEY
STYLE 01S, 02S, 03S
B
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_B_Part_B.qxd 11-12-13 11:19 AM Page 5
Medium
Base
PHENOLIC/PORCELAIN LAMPHOLDERS
KEYLESS, MEDIUM BASE
Side Hickeys For IS201 & IS211 Series
A
I13
A
B
with male nipple
A
B
37 N
38
39
40 S
41 N
42
42 N
43
43 S
44
44 N
45
46 S
46 N
47
48
49
49 N
50
50 A
50 S
51 N
52
53 N
54 N
55
56
57 N
58
59
15/16"
1-13/16"
1-13/32"
23/32"
1-1/8"
1-1/8"
1-11/32"
1-1/2"
1-1/2"
1-9/16"
1-9/16"
1-21/32"
1-11/16"
1-11/16"
1-5/8"
1-11/16"
3-1/2"
3-1/2"
1-7/16"
1-7/16"
1-7/16"
4-19/32"
1-1/2"
3-5/16"
1-9/16"
1-3/4"
1-5/16"
2-1/8"
3"
1-1/2"
3/8"
13/32"
1/2"
9/16"
5/16"
5/8"
5/16"
3/8"
1/2"
5/16"
5/16"
9/16"
1/2"
13/32"
11/32"
1/2"
1/4"
1/4"
3/8"
1/2"
1/2"
31/32"
35/64"
1/4"
25/64"
5/16"
5/16"
5/16"
1/4"
35/64"
with female
inside extrusion
DESCRIPTION OF
MOUNTING HOLE
1/8" IPS NIPPLE
1/8" IPS OD UNTAPPED
0.393" OD UNTAPPED
1/8" IPS TAP
1/8" IPS NIPPLE
1/8" IPS TAP
1/8" IPS NIPPLE
1/8" IPS TAP
1/8" IPS TAP
1/8" IPS TAP
1/8" IPS NIPPLE
0.393" OD UNTAPPED
0.406" DIAMETER HOLE
1/8" IPS NIPPLE
0.425" OD UNTAPPED
0.393" OD UNTAPPED
1/8" IPS TAP
1/8" IPS NIPPLE
1/8" IPS TAP
1/8" IPS TAP
1/8" IPS TAP
1/8" IPS NIPPLE
0.430" OD UNTAPPED
1/8" IPS NIPPLE
1/8" IPS NIPPLE
1/8" IPS TAP
1/8" IPS TAP
1/8" IPS NIPPLE
1/8" IPS TAP
0.484" X 0.374" SLOT UNTAPPED
TYPE
INSIDE EXTRUSION (SLANTED)
INSIDE EXTRUSION
INSIDE EXTRUSION
INSIDE EXTRUSION (SLANTED)
INSIDE EXTRUSION
SLANTED
INSIDE EXTRUSION
INSIDE EXTRUSION
INSIDE EXTRUSION (12° ANGLE)
INSIDE EXTRUSION (SLANTED)
INSIDE EXTRUSION
INSIDE EXTRUSION
INSIDE EXTRUSION
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Incandescent
BRACKET
NUMBER
B
Part_B_Part_B.qxd 11-12-13 11:19 AM Page 6
Medium
Base
I14
PHENOLIC/PORCELAIN LAMPHOLDERS
KEYLESS, MEDIUM BASE
“Z” Brackets For IS201 & IS211 Series
“U” TYPE
“D” TYPE
A
A
B
B
“I” TYPE
“U” TYPE (ANGLE)
A
B
C
Incandescent
B
BRACKET
NUMBER
A
90
91
92
93
94
95
96
97
98
99
100
101
102
141
3/4"
3/4"
7/8"
7/8"
7/8"
7/8"
1"
1"
1"
1-1/32"
1-3/8"
3/4"
3/4"
1-5/16"
B
5/16"
1"
5/32"
5/16"
5/16"
7/32"
1/4"
1/2"
1-1/16"
1-1/8"
3/16"
1"
5/16"
31/64"
DESCRIPTION OF
MOUNTING HOLE
TYPE
0.150"
NO. 4-40 TAP
0.189"
0.166"
0.142"
0.142"
0.142" X 0.174" SLOTTED
0.126"
0.126"
0.138"
0.142"
0.138"
NO.8-32 TAP
0.142"
U OR I
U OR I
U
U OR I
U
U (ANGLED, C=34°)
U
U
U OR D
U OR D
U
U OR D
U OR D
U OR D
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_B_Part_B.qxd 11-12-13 11:19 AM Page 7
Medium
Base
PHENOLIC/PORCELAIN LAMPHOLDERS
KEYLESS, MEDIUM BASE
Straight Brackets For IS201 & IS211 Series
BRACKET
NUMBER
A
120
121
122
7/8"
1-5/16"
1-3/8"
I15
DESCRIPTION OF
MOUNTING HOLE
A
NO. 6-32 TAP
0.142"
0.142"
Angle Brackets For IS201 & IS211 Series
BRACKET
NUMBER
A
B
DESCRIPTION OF
MOUNTING HOLE
3/4"
1-1/4"
1-7/16"
1-7/16"
1-7/16"
1-11/16"
1-15/16"
2-1/4"
2-13/32"
1-1/2"
1-7/16"
19/64"
19/64"
7/16"
11/32"
11/32"
5/16"
9/32"
1-1/8"
9/32"
9/32"
5/16"
0.158" (USE FOR QUICK HICKEY)
0.193"
0.138"
0.158"
0.138"
0.138"
0.142"
NO. 8-32 TAP
0.142"
NO.6-32 TAP
0.142"
A
"U" TYPE
B
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
D
D
D
D
D
D
D
D
D
D
D
B
"D" TYPE
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Incandescent
60U
61U
62U
63U
64U
65U
66U
67U
68U
69U
70U
Part_B_Part_B.qxd 11-12-13 11:19 AM Page 8
Medium
Base
I16
PHENOLIC/PORCELAIN LAMPHOLDERS
KEYLESS, MEDIUM BASE
Snap-In Clips For IS201 & IS211 Series
BRACKET
NUMBER
A
VERTICAL TYPE
401
402
3/8"
1/2"
0.281"
A
0.395"
Mounting panel
thickness 0.015-0.040"
(0.08" available on request)
BRACKET
NUMBER
A
HORIZONTAL TYPE
411U OR D
412U OR D
413U OR D
414U OR D
415U OR D
13/16"
1-3/8"
1-15/16"
2"
15/16"
A
"U" TYPE
A
Incandescent
"D" TYPE
BRACKET
NUMBER
A
B
ANGLED TYPE
421U
422U
423U
424U
425U
426U
427U
428U
429U
430U
431U
432U
433U
434U
435U
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
3/4"
3/4"
3/4"
27/32"
7/8"
15/16"
1"
1-3/8"
1-3/8"
1-3/8"
1-3/8"
1-31/32"
27/32"
1"
1-3/8"
15°
19°
23.5°
15°
25°
15°
10°
10°
18°
13°
11°
10°
10°
7°
7.5°
"U" TYPE
B
A
"D" TYPE
B
A
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_C_Part_C.qxd 11-12-13 11:34 AM Page 1
Medium
Base
PORCELAIN LAMPHOLDERS
KEYLESS, MEDIUM BASE
IS2209
1”
Base
Diameter
Porcelain Keyless Lampholder With
Two #6-32 Female Bushings For Mounting
I17
E-26
2"
/3
1-23/32"
27
1-1/2"
• Unglazed porcelain body 123⁄32" high and 11⁄2" outer
diameter
• Spring brass centre contact
• Aluminum screw shell is standard, brass or nickelplated copper available to order
IS2210
• Standard leads are 18 AWG, EXL 125°C, 12" long,
stripped 1⁄2" or specify desired length and type of wire
• Available with screw terminals for wiring
• Two threaded #6-32 female bushing for mounting
• UL Listed & CSA Certified
1”
Base
Diameter
Porcelain Keyless Lampholder
With Two #6-32" Screws For Mounting
E-26
1-1/2"
• Unglazed porcelain body 1 ⁄16" high with
11⁄2" outer diameter
• Spring brass centre contact
• Aluminum screw shell is standard, brass or nickelplated copper available to order
• Standard leads are 18 AWG, EXL 125°C, 12" long,
stripped 1⁄2" or specify desired length and type of wire
11
• Also available with screw terminals backed out and
staked – specify part number IS2210-T when ordering
• Two #6-32 captive screws for mounting
• Insulating cap IPS51 metal or IPS53 phenolic available
• UL Listed & CSA Certified
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Incandescent
1-11/16"
27/32"
Part_C_Part_C.qxd 11-12-13 11:34 AM Page 2
Medium
Base
I18
IS212
PORCELAIN LAMPHOLDERS
SNAP-IN KEYLESS, MEDIUM BASE
1”
Base
Diameter
Front Mount Shallow Back
Porcelain Keyless Lampholder
E-26
(2) 6-32 TERMINAL SCREW
1-25/64
(35.32)
27/32(21.43)
1-13/32
(35.72)
11/32(8.73)
1-11/16
(42.86)
1-13/32
(35.72)
39/64
(15.48)
1-17/32
(38.89)
Panel Thickness 0.030-0.062 (0.76-1.57)
Suggested Panel Opening
1-11/16
(42.86)
• Unglazed porcelain body
• Rust resistant spring tempered steel mounting clip
riveted to body
• Aluminum screw shell is standard. Brass or nickelplated copper available to order
IS213
• Available with male quick connect tabs, #6-32 screw
terminals, or wire leads
• Lampholders front mount into panel
• Will accommodate 0.032" to 0.093" panel thickness
• 660W, 250V
• UL Listed & CSA Approved
1”
Base
Diameter
Front Mount Shallow Shoulder
Porcelain Keyless Lampholder
C
US
E-26
(2) 6-32 Terminal Screws
1-5/8(41.28)
1-7/16(36.51)
1-3/8(34.93)
11/32(8.73)
1-33/64
(38.5)
Panel Thickness 0.025-0.062 (0.64-1.57)
17/64(6.75)
Incandescent
1-11/16(42.86)
• Unglazed porcelain body
• Rust resistant spring tempered steel mounting
clip riveted to body
• Aluminum screw shell is standard. Brass or
nickel-plated copper available to order
• Available with male quick connect tabs, #6-32 screw
terminals, or wire leads
• Lampholders front mount into panel
• Will accommodate 0.032" to 0.093" panel thickness
• 660W, 250V
• c UL us Listed
1”
Base
Diameter
IS245P Rear Mount Porcelain Keyless Lampholder
E-26
(2) 6-32 Terminal Screws
2-3/16(27.78)
1-53/64(46.43)
1-5/8(41.28)
1-7/16(36.51)
1-19/64
(32.94)
21/64(8.33)
5/16(7.94)
Panel Thickness 0.035-0.045 (.89-1.14)
1-13/32(35.72)
• Unglazed porcelain body
• Rust resistant spring tempered steel mounting clip
riveted to body
• Aluminum screw shell is standard. Brass or nickelplated copper available to order
• Available with male quick connect tabs,
•
•
•
•
•
#6-32 screw terminals, or wire leads
Mount from back of panel
Ideal for use in recessed cans and pot lights
Will accommodate 0.032" to 0.093" panel thickness
660W, 250V
UL Listed & CSA Approved
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_C_Part_C.qxd 11-12-13 11:34 AM Page 3
Medium
Base
PHENOLIC LAMPHOLDERS
SNAP-IN KEYLESS, MEDIUM BASE
IS242
1”
Base
Diameter
Phenolic Keyless Lampholder
Top Flanged, Snap-In Clip
I19
E-26
1-9/16
1-13/32"
DIA
1-25/64"
11/32"
NO LONGER AVAILABLE
1-19/32"
9/32"
1-11/16" DIA
• One piece high heat phenolic body
• U-shaped rust resistant tempered spring steel clip
riveted into the body
• Aluminum screw shell is standard. Brass or nickelplated copper available to order
IS243
• Lampholders can be supplied with any type and
length of leads
• Ground lead available upon request
• Front mount into panel
• Will accommodate 0.032" to 0.093" panel thickness
• UL Listed & CSA Certified
1”
Base
Diameter
Phenolic Keyless Lampholder
Tapered Top Flange, Snap-in Clip
E-26
19/64"
23/64"
1-13/32"
DIA
1-37/64"
1-23/64"
DIA
11/32"
1-17/32"
1-11/16" DIA
IS245
• Lampholders can be supplied with any type and length
of leads
• Ground lead available upon request
• Front mount into panel
• Will accommodate 0.032" to 0.060" panel thickness
• UL Listed & CSA Certified
1”
Base
Diameter
Phenolic Keyless Lampholder
Flanged, Snap-in Clip
E-26
• One piece high heat phenolic body
• U-shaped rust resistant tempered spring steel clip
riveted into the body
• Aluminum screw shell is standard. Brass or nickelplated copper available to order
• Lampholders can be supplied with any type and length
1-23/64" DIA
5/16
7/64
1-7/16"
DIA
1-9/16
1-5/8 DIA.
FLANGE
.328
1.823
of leads
• Ground lead available upon request
• Mounts from rear
• Will accommodate 0.032" to 0.093" panel thickness
• UL Listed & CSA Certified
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Incandescent
• One piece high heat phenolic body
• U-shaped rust resistant tempered spring steel clip
riveted into the body
• Aluminum screw shell is standard. Brass or nickelplated copper available to order
Part_C_Part_C.qxd 11-12-13 11:34 AM Page 4
Medium
Base
I20
PHENOLIC/PORCELAIN LAMPHOLDERS
MEDIUM BASE, OUTER THREADED BODY
1”
Base
Diameter
IS241P Outer Threaded Porcelain Lampholder
E-26
1-11/36"
1-3/8"
• Unglazed porcelain body with wireway for side wiring
• Aluminum screw shell is standard. Brass or nickelplated copper available to order
• Available with screw terminals or 18 AWG, EXL 125°C,
12" long leads, stripped 1⁄2"
• Can be supplied with any wire type
• SVT and SJT 2 or 3 conductor wires are available for
use with pendant fixtures
• Available with 1⁄8" IPS die cast or Bakelite caps
• Brackets are available with tapped holes or 1⁄8" IPS
female extension
• Supplied with adjustable metal or phenolic counter ring
• UL Listed & CSA Certified
Rings For IS241 & IS241P Series
2-3/8"
11/32"
1/4" 13/32"
9/16"
2-1/64"
2-9/32"
0.14
ISP-11
ISP-06
ISP-08
PHENOLIC RING
METAL (STEEL) RING
METAL (STEEL) RING
TCO SERIES - Thermal Cutouts and Covers
TCO METAL COVER
7" )
1.1 5mm
.7
(29
Panel Thickness 0.020 - 0.035
0.200
0.200 (2)
0.135 (2)
• Available in heat resistant plastic or
metal to securely hold thermal cut out in
recessed housings
• Plastic body is easily and quickly
snapped in to holes in the panel
• For ease of assembly the cover should
be inserted into the panel in the same
direction as panel pouch
• Metal body has metal ears which are
0.320"
8.10mm
0.150
0.520"
13.2mm
1.305
0.542"
(13.77mm)
"
27 )
0.2 8mm
7
.
5
(
0.405"(10.27mm)
easily rolled over the secure to the panel
• Eliminates the need for heat shrink
tubing
• Greatly enhances the assembly time
• Available in 5ºC increments
from 80ºC to 130ºC
• Thermal cut out come with 6" SEW-1
leads as standard. Other lengths
available.
0.125"
3.17mm
Part Number
TCO Plastic Cover
TCO Metal Cover
TCO-85C-6
TCO-90C-6
TCO-105C-6
TCO-110C-6
TCO-130C-6
0.50" (1.27mm)
0.418"(10.6mm)
0.50" (1.27mm)
1.45"
(36.8mm)
0.175" 4.45mm
TCO PLASTIC COVER
®
0.625 0.002
Incandescent
2-1/4"
0.475"
0.175" 4.45mm
2-3/8"
Description
Snap in plastic cover
Metal cover with ears
Thermal cut out 85º C
Thermal cut out 90º C
Thermal cut out 105º C
Thermal cut out 110º C
Thermal cut out 130º C
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_C_Part_C.qxd 11-12-13 11:34 AM Page 5
Medium
Base
PORCELAIN LAMPHOLDERS
KEYLESS, MEDIUM BASE
IS292
1”
Base
Diameter
Porcelain Keyless Two Piece
Receptacle, Two Screw Mounting
I21
E-26
13/16"
3/4"
2-5/16"
1-7/16" Centres
• High heat porcelain body
• Aluminum screw shell is standard. Copper or nickelplated copper available to order
• Concealed screw terminals under ring
• Mounts using two screws through base on 17⁄16" centres
IS313
• Also available with wire leads
• 660W, 250V
• UL Listed & CSA Certified
1”
Base
Diameter
Porcelain Keyless Sign Receptacle,
With Wire Leads
E-26
1-3/4"
20/32"
21/32"
IS322
• Other leads are available, specify type, length and
stripping
• Mounts into a 17⁄16" diameter hole in panel
• 660W, 250V
• UL Listed & CSA Certified
1”
Base
Diameter
Porcelain Keyless Sign Receptacle,
With Screw Terminals
E-26
23/32"
11/16"
1-3/4"
• High heat porcelain body
• Slots available to protect against rotation
• Aluminum screw shell is standard. Copper or nickelplated copper available to order
•
•
•
•
Also available with 0.250" male terminals or wire leads
Mounts into a 17⁄16" diameter hole in panel
660W, 250V
UL Listed & CSA Certified
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Incandescent
• High heat porcelain body
• Two locking notches to prevent rotation
• Aluminum screw shell is standard. Copper or nickelplated copper available to order
• Leads are 18 AWG, TEW 105°C, 9”long, stripped 1⁄2”
Part_C_Part_C.qxd 11-12-13 11:34 AM Page 6
Medium
Base
I22
IS309
PORCELAIN LAMPHOLDERS
KEYLESS, MEDIUM BASE
1”
Base
Diameter
Porcelain Keyless Lampholder For Use
With Commercial Reflector Units
E-26
1-31/32"
1"
17/32"
• Glazed high heat porcelain body
• Aluminum screw shell is standard. Copper or nickelplated copper available to order
• Screw terminals are standard with wireways at bottom
of socket; also available with wire leads, specify type,
length and stripping when ordering
• Mounts using 2 screws through #8-32 holes in
mounting ears
• 660W, 600V
• UL Listed & CSA Certified
1”
Base
Diameter
IS1501 Porcelain Angle Pan Socket
®
E-26
1-3/32"
Incandescent
• Unglazed porcelain body mounts at an angle of
approximately 15° to pan
• Aluminum screw shell is standard. Copper or nickelplated copper available to order
• Leads are 18 AWG, TEW 105°C 9" long, stripped 1⁄2"
#6-32 Tapped Hole
7/8"
• Other leads are available, specify type, length and
stripping
• Bracket has one hole tapped #6-32 for screw mounting
• Pedestal of this socket fits through piercing in pan
• 660W, 250V
• UL Listed
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_C_Part_C.qxd 11-12-13 11:34 AM Page 7
Medium
Base
PORCELAIN LAMPHOLDERS
KEYLESS
1”
Base
Diameter
IS509 Side Outlet Porcelain Keyless Lampholder
I23
®
C
US
E-26
A
2.000(50.8)
7/16
(11.11)
1/8-27
1-1/2(38.1)
• One piece unglazed porcelain body with ⁄8" IPS-27
NPS female bushing and set screw
• The cap is keyed to the body to prevent rotation
• Insulator assures isolation of the screw terminals
1
IS510
• The screws are staked and backed out for fast and
easy assembly
• Standard screwshell is aluminum; brass or nickelplated brass is also available
• CULUS Listed
1”
Base
Diameter
Twin Porcelain Keyless Lampholder
With 1⁄8" IPS Bushing
®
C
US
E-26
2-15/16"
(74.5)
IS511
• Screw terminals are staked and backed out for easy wiring
• Also available with leads attached
• CULUS Listed
1”
Base
Diameter
Short Body Twin Porcelain
Keyless Lampholder
®
C
US
E-26
1-21/32"
1-1/2"
2"
• One piece unglazed short body with 1⁄8" IPS-27 NPS
female bushing and set screw on stamped steel cap
• An insulator serves to isolate the cap from the
screw terminals
• Standard is nickel-plated copper alloy screw shell
• Screw terminals are staked and backed out for easy wiring
• CULUS Listed
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Incandescent
• Two piece unglazed porcelain body joined through a
steel
strap with 1⁄8" IPS-27 NPS female bushing and set screw
• Standard is aluminum screw shell
• Screw terminals are standard
1-1/2"
(38.0)
Part_C_Part_C.qxd 11-12-13 11:34 AM Page 8
Medium
Base
I24
ISP-50
PHENOLIC & METAL CAPS
FOR LAMPHOLDERS
Phenolic Cap for IS201, IS211
& IS275 Series
1-1/4"
11/32"
25/64"
7/32"
19/64"
1/16"
0.150 hole
3/8"
• Phenolic cap with wire outlets on centre and side
• For use on IS201, IS211, and IS275 series lampholders
ISP-51
• Cap accepts any hickeys or clips on the above sockets
Metal Cap for IS2210 & IS267S
⁄8" IPS
1
NO
6-32 UNC
1-7/16"
NO
6-32 UNC
• Metal caps for porcelain sockets IS2210 and IS267 series
• Has 1⁄8" IPS thread and screw set
ISP-52
7/8"
13/32"
1/8-27 IPS
• Available without set screw, order as ISP-51X
Metal Cap for IS2210 & IS267S
⁄4" IPS
Incandescent
1
NO
6-32 UNC
1-7/16"
NO
6-32 UNC
• Metal caps for porcelain sockets IS2210 and IS267
• Has 1⁄4" IPS thread and screw set
ISP-53
7/8"
13/32"
1/4-18 IPS
• Available without set screw, order as ISP-52X
Phenolic Cap for IS2210 1⁄8" IPS
29/32"
1-7/16"
NO
6-32 UNC
1/8-27 IPS
• Molded of high heat phenolic
• Has 1⁄8" IPS thread and screw set
• Available without set screw, order as IPS-53X
FOR MORE INFORMATION CALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_D_Part_D.qxd11-12-1311:37AMPage1
Medium
Base
PHENOLIC TWO LIGHT
CLUSTER LAMPHOLDERS
1”
Base
Diameter
IS215SeriesPhenolicTwoLightClusterLampholders
I25
E-26
.718"
7/8"
TN
.718"
TA
TA
1-1/4"
1-1/4"
BA
BA
BN
2-31/64"
2-31/64"
• Twinsocketmoldedofhighheatphenolic,
Blackstandardcolour
• AvailableinWhiteUrea
• For2x60Wbulbs,overalldistanceis93⁄8"
withbulbsinstalled
• Standardscrewshellisaluminum
• Availableinmanybracketconfigurations,fittedwith
nipples,tappedholes,snapspringsorbushings
1-47/64"
• Standardnipplesare1⁄8"IPSflatsided5⁄16"long
• Rotaryorpullswitchesareavailable
• Standardleadsare18AWG,TEW105°C,
7"long,stripped1⁄2"
• Itemsin()areoptionalandrefertothelistofbrackets
below
• ULListed&CSACertified
(G)-IS215-(801)-(842)-(7TEW)
GROUND WIRE
LEAD LENGTH & TYPE
TOP BRACKET NO.
BOTTOM BRACKET NO.
BracketsForIS215Series
1-1/16"
1-7/16"
1-19/32"
2-3/16"
1-11/16"
2-11/32"
1-27/32"
1-11/16"
SNAP SPRING
SNAP SPRING
SNAP SPRING
SNAP SPRING
SNAP SPRING
SNAP SPRING
SNAP SPRING
SNAP SPRING
SNAP SPRING
SNAP SPRING
SNAP SPRING
1/8" IPS TAP EXTRUSION
1/8" IPS TAP EXTRUSION
1/8" IPS TAP EXTRUSION
1/8" IPS TAP EXTRUSION
1/8" IPS TAP EXTRUSION
NO. 6-32 THREAD
1/8" IPS TAP EXTRUSION
1/4" IPS NIPPLE
1/8" IPS NIPPLE
TOPBRACKET
A B
BOTTOM
BRACKET
A B
FORMOREINFORMATIONCALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Incandescent
MOUNTING
ALL BRACKETS ARE DOUBLE LEG
Part_D_Part_D.qxd11-12-1311:37AMPage2
Medium
Base
I26
IS235
PHENOLIC THREE LIGHT
CLUSTER LAMPHOLDERS
1”
Base
Diameter
SeriesPhenolicThreeLight
ClusterLampholders
E-26
2 FITTING
1/8-27 THD
5/16
A
7/16
1/8-27 THD
• Moldedofhighheatphenolic
• AvailableinWhiteUrea
• For3x60Wbulbs,overalldistanceis91⁄2"
withbulbsinstalled
• Standardscrewshellisaluminum
• Availableinmanybracketconfigurations,fittedwith
nipples,tappedholes,snapspringsorbushings
B
• Standardnipplesare ⁄8"IPSflatsided1⁄2"long
• Rotaryorpullswitchesareavailable
• Standardleadsare18AWG,TEW105°C,7"long,
stripped1⁄2"
• Itemsin()areoptionalandrefertothelistofbrackets
below
• ULListed&CSACertified
1
(G)-IS235-(865)-(865)-(7TEW)
GROUND WIRE
LEAD LENGTH & TYPE
TOP BRACKET NO.
BOTTOM BRACKET NO.
Incandescent
BracketsForIS235Series
BRACKET
NUMBER
A
B
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
5/16"
1/2"
3/4"
1"
1-1/2"
1-3/4"
2"
2-1/2"
3"
11/16"
7/8"
1-3/16"
1-5/16"
1-3/8"
1-7/8"
2-1/8"
2-3/8"
2-5/8"
13/16"
1"
1-1/4"
1-1/2"
2"
2-1/4"
2-1/2"
3"
3-1/2"
1-3/16"
1-3/8"
1-11/16"
1-13/16"
1-7/8"
2-3/8"
2-5/8"
2-7/8"
3-1/8"
MOUNTING
ALL BRACKETS ARE DOUBLE LEG
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
1/8"
IPS THREADED
IPS THREADED
IPS THREADED
IPS THREADED
IPS THREADED
IPS THREADED
IPS THREADED
IPS THREADED
IPS THREADED
IPS THREADED
IPS THREADED
IPS THREADED
IPS THREADED
IPS THREADED
IPS THREADED
IPS THREADED
IPS THREADED
IPS THREADED
HOLE,
HOLE,
HOLE,
HOLE,
HOLE,
HOLE,
HOLE,
HOLE,
HOLE,
HOLE,
HOLE,
HOLE,
HOLE,
HOLE,
HOLE,
HOLE,
HOLE,
HOLE,
NIPPLE,
NIPPLE,
NIPPLE,
NIPPLE,
NIPPLE,
NIPPLE,
NIPPLE,
NIPPLE,
NIPPLE,
NIPPLE,
NIPPLE,
NIPPLE,
NIPPLE,
NIPPLE,
NIPPLE,
NIPPLE,
NIPPLE,
NIPPLE,
SNAP-IN
SNAP-IN
SNAP-IN
SNAP-IN
SNAP-IN
SNAP-IN
SNAP-IN
SNAP-IN
SNAP-IN
SNAP-IN
SNAP-IN
SNAP-IN
SNAP-IN
SNAP-IN
SNAP-IN
SNAP-IN
SNAP-IN
SNAP-IN
CLIP
CLIP
CLIP
CLIP
CLIP
CLIP
CLIP
CLIP
CLIP
CLIP
CLIP
CLIP
CLIP
CLIP
CLIP
CLIP
CLIP
CLIP
Specifywhichoneyourequirewhenordering.
FORMOREINFORMATIONCALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_D_Part_D.qxd11-12-1311:37AMPage3
Medium
Base
MEDIUM BASE ADAPTERS
& EXTENSIONS
IS270
1”
Base
Diameter
PhenolicAdapterWithMountingEars
I27
C
US
E-26
1-1/2
1.275
1-11/16
• Onepiecephenolicbodywithstandardmalescrew
shellwithreinforcingring
• Hastwoearson19⁄32"centresformounting
• Standardscrewshellisaluminum.Brassornickelplated,brassavailableuponrequest
• Adapterisavailablewithorwithoutleads
IS270-1
• Standardwireleadsare18AWG,TEW105°C,
6"long,stripped1⁄2"
• Canbesuppliedharnessedtomostsocketsonrequest
• 660W,250V
• cULusListed
1”
Base
Diameter
PhenolicFlangedAdapter
C
US
E-26
1-3/8
1-11/32
IS276-A
• Standardwireleadsare18AWG,TEW105°C,
6"long,stripped1⁄2"
• Canbesuppliedharnessedtomostsocketsonrequest
• 660W,250V
• cULusListed&CSACertified
1”
Base
Diameter
PorcelainOnePieceExtender
MediumtoMedium
E-26
2-7/32"
1.024"
MEDIUM BASE
1-17/32
• Onepieceporcelainbody
• Usedtoextendlampincansandwhenusing
Capsulytehalogenlamps
• Extendslamp11⁄4"longer
• Standardscrewshellisaluminum,nickel-platedcopper
availableuponrequest
• 660W,250V
• ULListed&CSACertified
FORMOREINFORMATIONCALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Incandescent
• Onepiecephenolicbodywithstandardmalescrew
shellwithreinforcingring
• Standardscrewshellisaluminum.Brassornickelplatedbrassavailableuponrequest
• Adapterisavailablewithorwithoutleads
Part_D_Part_D.qxd11-12-1311:37AMPage4
Medium
Base
I28
IS271
MEDIUM BASE HID 4KV
1”
Base
Diameter
KeylessTwoPieceSurfaceMount
LampReceptacle
E-26
1-35/64"
29/32"
1-15/32"
2-1/8"
• Highheatphenolicbodyandcap2 ⁄8"outsidediameter
by11⁄32"overallheight
• Captightenstoscrewshell
• Aluminumscrewshellisstandard
• Concealed#6-32screwterminalsbackedoutforeasywiring
1
CurioLight
• Providedwithtwo#8-32threadedbrassbushings
spacedon17⁄32"centresformounting
• 660W,250V
• ULListed&CSACertified
1”
Base
Diameter
BottomTurnSocket,Pre-Wired
WithCord,Reflector&Lamp
®
E-26
• BottomturnON-OFFsocketmountedtopaintedsteel
reflectorbracket
• Has10’SPT-2Browncordattached,withpolarized
maleplug
• Comeswith25WT10lampinstalledinsocket
• Mountseasilyintocabinetusing2screwson
reflectorbracket
• Installintoaminimumspaceof18"x12"x12"
• ULListed
1”
Base
Diameter
IS267S-1MediumBase4KVPulseRatedLampholder
E-26
1-1/2"
27/32"
NO 6-32 UNC
SCREW
1-21/32"
Incandescent
2-3/8"
(59.8)
8-9/16"
(217)
•
•
•
•
Whiteglazedporcelainbody
Copperalloynickel-platedscrewshell
Copperalloynickel-platedcentrecontact
Standardleadsare18AWG,SEW-2(SF2)600V
200°C,12"long,orspecifydesiredwireandlength
• Suppliedwithinsulatingfibre
• Suppliedwithtwo#6-32mountingscrewson27⁄32"
centres
• Diecastcapsareavailable
• 660W,600V
• ULListed&CSAApproved
FORMOREINFORMATIONCALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_D_Part_D.qxd11-12-1311:37AMPage5
Medium
Base
MEDIUM BASE HID 4KV
PULSE RATED LAMPHOLDERS
1”
Base
Diameter
IS267S-2MediumBase4KVPulseRatedLampholder
I29
E-26
NO 6-32 UNC
SCREW
1-1/2"
27/32"
1-21/32"
3/16"
•
•
•
•
•
Whiteglazedporcelainbody
Copperalloynickel-platedscrewshell
Copperalloynickel-platedcentrecontact
Withscrewterminals
Suppliedwithinsulatingfibre
• Suppliedwithtwocaptive#6-32
threadedbushingson27⁄32"centres
• Diecastcapsareavailable
• 660W,600V
• ULListed&CSAApproved
IS267S-EP-1
4KVPulseRated-MediumBase
withMountingScrews
IS267S-EP-2 4KVPulseRated-MediumBase
with6/32”Bushings
E-26
IS268
MediumBase4KVPulseRated
Snap-InMountingLampholder
requirementsforthelivescrewshell.
• Standardleadsare18gaugeSF-200Cleads12”long.
• Availablewithlampgripscrewshell.
• Availablewithscrewshellreinforcingwashers.
• 660W,600V
• cULus&cCSAusListed
1”
Base
Diameter
E-26
• Whiteunglazedporcelainbody
• Copperalloynickel-platedscrewshell
• Hashighdielectricconstructionwithheatresistantmica
insulatorbetweenscrewshellandcentrecontact
• Snapsinfromthetopofpanel
• Availablewithscrewterminals,wireleads,
or.250"x.032”malequickconnecttabs
• 660W,600V
• ULListed&CSAApproved
FORMOREINFORMATIONCALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Incandescent
• ForuseinapplicationswiththeGEMXR32WMetal
Halidelamp.
• Copperalloynickel-platedscrewshell.Leafspring
supportednickelplatedcentercontact.
• Whiteglazedporcelainbody.
• SpecialextendedbodydesigntoconformwithUL
Part_D_Part_D.qxd11-12-1311:37AMPage6
Mogul
Base
I30
IS4221Series
MOGUL BASE HID
PULSE RATED LAMPHOLDERS
11/2”
Base
Diameter
MogulBase4KVPulseRated
Lampholder
E-40
2-41/64"
1-3/8"
IS4221-1 Series
Screw Terminal Type
2-5/32"
1-3/8"
Incandescent
•
•
•
•
Whiteglazedporcelainbodywithwireways
Nickel-platedcopperalloyscrewshellwithlampgrips
Stainlesssteelcentrecontact
Standardleadsare16AWG,SEW-2,200°C,
12"long,stripped1⁄2"
•
•
•
•
IS4221-2 Series
Leads Lugged To Screw Shell
And Centre Contact
2-5/32"
1-3/8"
IS4221-3 Series
Male Tab Type
IS4221-4 Series
Leads Lugged To Screws
At Back Of Socket
2-5/32"
1-7/16"
2-5/32"
1-3/8"
Availablewith8⁄32"palnutsorbushings,or8⁄32"captivescrews
Insulatorisincluded
Rated1,500W,600V
ULListed&CSACertified
Toorder,addseriestypetopartnumber.Example:IS4221-Xfortheseriestype,thereforeIS4221-4-12SNPLWis
leadsluggedtobackofsocket,12"SEW-2leads,NPCSS,palnutsandwireways.
IS4225-OR-1 5KVPulseRated-MogulBase
withMountingScrews
IS4225-OR-2 5KVPulseRated-MogulBase
withpalnutsformounting
E-40
• ForuseinapplicationsforopenratedfixtureMetal
Halidelamps.
• Copperalloynickel-platedscrewshell.Leafspring
supportednickelplatedcentercontact.
• Lightpinkglazedporcelainbody.
• Specialdesignthatwillnotmakethecentercontactof
standardmetalhalidelamps.
• Standardleadsare18gaugeSF-200Cleads12”long.
• Availablewithlampgripscrewshell.
• Availablewithscrewshellreinforcingwashers.
• 660W,600V
• cULus&cCSAusListed
FORMOREINFORMATIONCALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_D_Part_D.qxd11-12-1311:37AMPage7
Mogul
Base
MOGUL BASE HID
PULSE RATED LAMPHOLDERS
IS4225Series
11/2”
Base
Diameter
MogulBase5KVPulseRated
Lampholder
I31
®
C
US
E-40
1.43" (36.3)
1.37" (34.9)
2.13" dia. (54.0)
TO DEPRESSED CENTER CONTACT
3.02" (76.6)
•
•
•
•
Porcelaingreyglazedbodywithcermanicarcshield
Nickelplatedcopperalloyscrewshellwithlampgrips
Leadsarecrimpedforexcellentwireretention
14AWGSF-2(SEW-2)200˚C600Vglassbraid12”longare
standard,otherlengthsavailableuponrequest
• Maletabsavailabletoreduceinventoryandallowforfasterfixturewiring
• Wirewaysarestandardbutareavailablewithoutonspecialorder
IS4225-POSeries
•
•
•
•
•
•
Diecastcapsandinsulatorsareavailable
Addsuffix“-1”formountingscrews
Addsuffix“-2”forfemalebushings
Addsuffix“-4”forfemalepalnuts
Rated1500W600V
cULus listed
11/2”
Base
Diameter
MogulBase5KVPulseRated
PositionOrientedLampholder
®
C
US
E-40
DesignedforhorizontalorientedHID lamps
Hasabodynotchontherimforcorrectmountingorientation
Nickelplatedcopperalloyscrewshellwithlampgrips
Leadsarecrimpedforexcellentwireretention
14AWGSF-2(SEW-2)200˚C600Vglassbraid12”longare
standard,otherlengthsareavailableuponrequest
• Maletabsavailabletoreduceinventoryandallowforfasterfixturewiring
IS4226Series
•
•
•
•
•
•
•
Wirewaysarestandardbutareavailablewithoutonspecialorder
Diecastcapsandinsulatorsareavailable
Addsuffix“-1”formountingscrews
Addsuffix“-2”forfemalebushings
Addsuffix“-4”forfemalepalnuts
Rated1500W600V
cULus listed
11/2”
Base
Diameter
MogulBase 6KVPulseRated
Lampholder
Incandescent
•
•
•
•
•
®
C
US
E-40
1.37" (34.9)
2.15" dia. (54.7)
2.83" (71.8)
TO DEPRESSED CENTER CONTACT
•
•
•
•
•
DesignedforwiderangeofHID mogulbaselamps,HPS,MHandMV
Usedinparkinglot,industrial,streetandoutdoorlightingapplications
Nickelplatedcopperalloyscrewshellwithlampgrips
Leadsarecrimpedforexcellentwireretention
14AWGSF-2(SEW-2)200˚C600Vglassbraid12”longare
standard,otherlengthsareavailableuponrequest
• Maletabsavailabletoreduceinventoryandallowforfasterfixturewiring
•
•
•
•
•
•
•
1.11" (28.2)
Wirewaysarestandardbutareavailablewithoutonspecialorder
Diecastcapsandinsulatorsareavailable
Addsuffix“-1”formountingscrews
Addsuffix“-2”forfemalebushings
Addsuffix“-4”forfemalepalnuts
Rated1500W600V
cULus listed
FORMOREINFORMATIONCALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_D_Part_D.qxd11-12-1311:37AMPage8
Mogul&Medium
Base
I32
ISP55
ISP55-1⁄2
5Kv MOGUL BASE PULSE RATED FOR OPEN
RATED FIXTURES & BOTTOM TURN KNOB
MEDIUM BASE SOCKETS
⁄4"IPSMetalCapForIS4221Series
⁄2"IPSMetalCapForIS4221Series
1
1
• DiecastmogulcapforIS4221serieslampholders
• Capshavetwo#8-32tappedmountingholeson13/8”centres
IS216
1”
Base
Diameter
SingleLightOnePieceBottomTurnKnob
Socket
E-26
Item Number Overall Height
IS216-1
1-53/64”
IS216-2
2-1/8”
IS216-3
2-19/32”
15/16"
1-37/64
7/16"
OAH
• Onepiecephenolicbottomturnsocket,featuringbuiltinrotaryswitchwithnon-removableknob
• Corrosionprotectedbracketmountedon1⁄8"IPSflatsidedbushing
• Availablewithscrewterminalsorwireleads
• Screwsare#6-32,backedout
IS218
• Standardleadsare18AWG,TEW105°C,6"long,
stripped1⁄2"
• Otherlengthsandwiretypesareavailabletoorder
• Suppliedwithhexnutinstalled
• Finishingnutsuppliedseparately
• ULListed&CSAApproved
1”
Base
Diameter
SingleLightTwoPieceBottomTurnKnob
SocketWithPhenolicHusk
E-26
9/32"
2-7/16"
.286"
2"
Incandescent
1-1/4" DIA
1-5/16" OD
• Phenolicinteriorandremovablehusk,featuringbuilt-in
rotaryON-OFFswitchwithnon-removableknob
• Flatsonbushingandhuskpreventrotationofhuskand
finishingnut
• Standardscrewshellisaluminum,brassornickelplatedcopperareavailableuponrequest
• Availablewith#6-32screws,backedout,
oreyeletsforsoldering
• Twohusksareavailable:RTypeforSPT-1
andDTypeforSPT-2
• ULListed&CSAApproved
FORMOREINFORMATIONCALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_E_Part_E.qxd11-12-1311:42AMPage1
Medium
Base
INTERIOR MECHANISMS
MEDIUM BASE
IS219I
Push-ThruElectrolier
ScrewTerminals
IS219I-PI PushThruElectrolier
PushInWireTerminals
• Phenolicbody,aluminumscrewshell
• Pushthroughsinglecircuit,noscrews
• Simplypushintindipped18
AWGwireintowireleadsand
turninginofthebindingscrew
• Rated660W250V
• URrecognizedandCSA
approved
• Phenolicbody
• Aluminumscrewshell
• Terminalscrewsare
backedout
• ULListed&CSACertified
IS230I
PullChainElectrolier
IS250I
• Phenolicbody
• Aluminumscrewshell
• Terminalscrewsarebacked
out
• Beadedchain,5"long
• Brassfinish
• ULListed&CSACertified
IS251I
TurnKnobElectrolier
IS253I-PI
Phenolicbody
Aluminumscrewshell
SinglecircuitON-OFF
Terminalscrewsarebackedout
Removableturnknob
ULListed&CSACertified
KeylessElectrolier
• Phenolicbody
• Aluminumscrewshell
• Twotabsonbodylockto
preventrotation
• Terminalscrewsarebackedout
• ULListed&CSACertified
IS253I
Tri-LightElectrolier
ScrewTerminals
•
•
•
•
Phenolicbody
Aluminumscrewshell
3-WayL-M-H-OFF
Terminalscrewsarebacked
out
• Removableturnknob
• ULListed&CSACertified
Tri-LightElectrolier
PushInWireTerminals
•
•
•
•
Phenolicbody
Aluminumscrewshell
3-WayL-M-H-OFF
Noscrews,simplypushin
tin-dipped18AWGwire
intowireterminal.Eliminates
wrappingofwireleadsand
turninginofthebindingscrew
• Rated660W250V
• URrecognized&
CSAApproved
FORMOREINFORMATIONCALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Incandescent
•
•
•
•
•
•
I33
Part_E_Part_E.qxd11-12-1311:42AMPage2
Medium
Base
I34
METAL SHELL LAMPHOLDERS
ELECTROLIER MEDIUM BASE
StandardMetalShellLampholder
CAP
SET SCREW
BUSHING
1-1/16
1-1/16
1-1/16
CENTRE
OF KEY
KNOB OR
PULL CHAIN
SHELL
2-7/32
1-1/4"
1-19/64"
1-23/64"
IS219M-PI
LINING
EXTENDS
1/16"-1/8"
IS219M
• Cap/shellmadefromaluminum
• Polishedgiltfinishorpolished
brassfinishisavailable
• Standardcapbushingis1⁄8"IPS
• StandardshelliswithoutUNOthread
• Availablewithorwithoutset
screwoncap-addsuffix-SSto
partnumberforsetscrew,e.g.
IS253M-SS
Push-ThruElectrolier
PushInWireTerminals
•
•
•
•
•
•
IS230M
•
•
•
•
Insulatednylonpushbar
Travelofpushbaris1⁄4"
PushthroughsinglecircuitON-OFF
NoScrew,simplepushintindipped
18AWGwireintowireterminal.
Eliminateswrappingofwireleads
andturninginofthebindingscrew.
• Rated660W,250V
• URrecognized&CSAapproved
IS250M
KeylessElectrolier
IS251M
Tri-LightElectrolier
ScrewTerminals
•
•
•
•
•
•
3-WayL-M-H-OFF
Foroperatinga2filamentlamp
Removableturnknob
InteriorisNo.IS253I
Screwterminalsbackedout
Lesssetscrewunless
otherwisespecified
• 250W,250V
• ULListed&CSACertified
Incandescent
Insulatednylonpushbars
Travelofpushbaris1⁄4"
InteriorisNo.IS219I
Screwterminalsbackedout
660W,250V
ULListed&CSACertified
PullChainElectrolier
•
•
•
•
•
•
• Interiorhastwoprojectionsthat
preventrotationinshell
• InteriorisNo.IS250I
• Screwterminalsbackedout
• Lesssetscrewunless
otherwisespecified
• ULListed&CSACertified
IS253M
Push-ThruElectrolier
ScrewTerminals
PullchainsinglecircuitON-OFF
Beadedchain5"long,withendbell
InteriorisNo.IS230I
Screwterminalsbackedout
660W,250V
ULListed&CSACertified
TurnKnobElectrolier
• SinglecircuitON-OFFelectrolier
• Removableturnknobis
moldedplastic
• InteriorisNo.IS251I
• Screwterminalsbackedout
• Lesssetscrewunless
otherwisespecified
• ULListed&CSACertified
IS253M-PI
Tri-LightElectrolier
PushInWireTerminals
•
•
•
•
3-WayL-M-H-OFF
Foroperating2filamentlamp
Removableturnknob
NoScrew,simplypushintin
dipped18AWGwireintowire
terminal.Eliminateswrappingof
wireleadsandturninginofthe
bindingscrew
• Rated660W,250V
• URrecognized&CSAapproved
FORMOREINFORMATIONCALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_E_Part_E.qxd11-12-1311:42AMPage3
Medium
Base
PHENOLIC SHELL LAMPHOLDERS
ELECTROLIER MEDIUM BASE
StandardPhenolicShellLampholder
IS219P
PushThruElectrolier
I35
1-17/32"
2-11/16"
2-13/32"
3/4"
• Cap/shellmadefromhigh
strengthphenolic
• StandardcolourisBrown
• Standardcapbushingis1⁄8"IPS
• Standardshelliswithoutthread
• Availablewithorwithoutset
screwoncap
IS219P-PI PushThruElectrolier
PushInWireTerminals
• Insulatednylonpushbar,travelof
pushbaris1/4”
• Pushbarthroughsinglecircuit
ON-Off
• Screwterminalsarebackedout
• Rated660W,250V
• URrecognized&CSAapproved
IS230P
• Insulatednylonpushbar,travelof
pushbaris1/4”
• PushbarthroughsinglecircuitON-Off
• NoScrew,simplypushintin
dipped18AWGwireinto
terminal.Eliminateswrappingof
wireleadsandturninginofthe
bindingscrew
• Rated660W,250V
• URrecognized&CSAapproved
IS250P
KeylessElectrolier
•
•
•
•
•
•
IS251P
3-WayElectrolier
ScrewTerminals
•
•
•
•
•
•
3-WayL-M-H-OFF
Foroperatinga2filamentlamp
Removableturnknob
InteriorisNo.IS253I
Screwterminalsbackedout
Lesssetscrewunless
otherwisespecified
• 250W,250V
• ULListed&CSACertified
PullchainsinglecircuitON-OFF
Beadedchain5"long,withendbell
InteriorisNo.IS230I
Screwterminalsbackedout
660W,250V
ULListed&CSACertified
TurnKnobElectrolier
• SinglecircuitON-OFFelectrolier
• Removableturnknobis
moldedplastic
• InteriorisNo.IS251I
• Screwterminalsbackedout
• Lesssetscrewunless
otherwisespecified
• ULListed&CSACertified
IS253P-PI
Tri-LightElectrolier
PushInWireTerminals
•
•
•
•
3-WayL-M-H-OFF
Foroperating2filamentlamp
Removableturnknob
NoScrew,simplypushintin
dipped18AWGwireintowire
terminal.Eliminateswrappingof
wireleadsandturninginofthe
bindingscrew
• Rated660W,250V
• URrecognized&CSAapproved
FORMOREINFORMATIONCALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Incandescent
• Interiorhastwoprojectionsthat
preventrotationinshell
• InteriorisNo.IS250I
• Screwterminalsbackedout
• Lesssetscrewunless
otherwisespecified
• ULListed&CSACertified
IS253P
PullChainElectrolier
Part_E_Part_E.qxd11-12-1311:42AMPage4
Medium
Base
I36
IS260
CEILING AND SURFACE
MEDIUM BASE LAMPHOLDERS
CeilingMediumBaseReceptaclewithPullChainSwitch
• Twopieceheavydutyphenolicbodyallowfor
interiorreplacement
• Mountson4"outletboxes
• Mountingscrewsareprovided
• 2"ofballchainwith36"pullcordandbellisprovided
IS261
Incandescent
•
•
•
•
•
•
•
•
US
®
E-26
C
US
1”
Base
Diameter
®
E-26
C
US
2backedoutscrewsforeasierwiring
Standardcolouriswhite
Rated660Wat250V
cULus listed
CeilingMediumBaseReceptaclewithPullChainSwitch
• Twopieceheavydutyporcelainbodyallowfor
interiorreplacement
• Mountson4"outletboxes
• Mountingscrewsareprovided
• 2"ofballchainwith36"pullcordandbellisprovided
C
Aluminumscrewshellisstandard
Standardcolouriswhite
Rated660Wat250V
cULus listed
CeilingMediumBaseReceptaclewithPullChainSwitch
• Twopieceheavydutyphenolicbodyallowfor
interiorreplacement
• Mountson4"outletboxesandhavebreakoutsfor31⁄4"boxes
• Mountingscrewsareprovided
• 2"ofballchainwith36"pullcordandbellisprovided
IS263
1”
Base
Diameter
•
•
•
•
®
E-26
4backedoutscrewsforeasierwiring
Standardcolouriswhite
Rated660Wat250V
cULus listed
CeilingMediumBaseKeylessReceptacle
• Twopieceheavydutyphenolicbodyallowfor
interiorreplacement
• Mountson4"outletboxes
• Mountingscrewsareprovided
• 4backedoutscrewsforeasierwiring
IS262
•
•
•
•
1”
Base
Diameter
1”
Base
Diameter
®
E-26
C
US
2backedoutscrewsforeasierwiring
Standardcolouriswhite
Rated250Wat250V
cULus listed
FORMOREINFORMATIONCALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_E_Part_E.qxd11-12-1311:42AMPage5
Medium
Base
CEILING AND SURFACE
MEDIUM BASE LAMPHOLDERS
IS264
•
•
•
•
CeilingMediumBaseKeylessReceptacle
Twopieceheavydutyporcelainbody
Mountson4"outletboxesandhavebreakoutsfor31⁄4"boxes
Mountingscrewsareprovided
2backedoutscrewsforeasierwiring
IS265
•
•
•
•
•
•
•
•
®
C
US
Incandescent
•
•
•
•
US
4backedoutscrewsforeasierwiring
Standardcolouriswhite
Rated250Wat250V
cULus listed
4backedoutscrewsforeasierwiring
Standardcolouriswhite
Rated250Wat250V
cULus listed
LightBulbWireCage
• Usedtoprotectlampsfromaccidentalimpact
• Guardopenseasilyforbulbchange
I37
®
C
CeilingMediumBaseReceptaclewithPullChain
SwitchandOutlet
• Twopieceheavydutyporcelainbodyallowfor
interiorreplacement
• Mountson4"outletboxes
• Mountingscrewsareprovided
• 2"ofballchainwith36"pullcordandbellisprovided
US
Aluminumscrewshellisstandard
Standardcolouriswhite
Rated250Wat250V
cULus listed
CeilingMediumBaseKeylessReceptacle
• Twopieceheavydutyporcelainbodyallowsfor
interiorreplacement
• Mountson4"outletboxes
• Mountingscrewsareprovided
• 2"ofballchainwith36"pullcordandbellisprovided
IS266
®
C
®
C
US
• Mountstoanyoftheceilinglampholderswhichhave
agroovedneck
FORMOREINFORMATIONCALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_E_Part_E.qxd11-12-1311:42AMPage6
Medium
Base
I38
IS513
WEATHERPROOF MEDIUM BASE
LAMPHOLDERS
1”
Base
Diameter
PhenolicPinTypeWeatherproofLampholder
PhenolicPinTypeWeatherproofLampholderwithHook
IS515
0.59" 4"
•
•
•
•
1”
Base
Diameter
®
E-26
C
US
connectionwithoutstripping,bendingortightening
screws.
Withdetachableplatedsteelwirehook
Hasanintegralmoldedscrewshellwith
skeletontypecontacts
Rated660Wat250V
cULus listed
1”
Base
Diameter
RubberPigtailWeatherproofLampholder
®
E-26
C
US
1.65" 41.8mm
• Twopieceheavydutyphenolicbody
• Acceptsno.14AWGorno.12AWGstrandedinsulatedwire
• Idealforstringingmultiplelampsonthesame
conductors
• Asthecapisscrewedon,thepinterminalspiercethe
insulationofthewiretoprovideasafepositive
US
connectionwithoutstripping,bendingortightening
screws.
• Hasanintegralmoldedscrewshellwith
skeletontypecontacts
• Rated660Wat250V
• cULus listed
1.40" 35.5mm
Incandescent
IS514
C
1.47" 37.4mm
1.89" 48mm
1.59" 40.5mm
• Twopieceheavydutyphenolicbody
• Acceptsno.14AWGorno.12AWGstrandedinsulatedwire
• Idealforstringingmultiplelampsonthesame
conductors
• Asthecapisscrewedon,thepinterminalspiercethe
insulationofthewiretoprovideasafepositive
®
E-26
B-B
• Usedforutilitylightapplications,indoorsoroutdoors.
Example,temporarylightingduringbuilding
construction
• Rubbersocketshaveanextendedliptosealagainst
thelamp
• Aluminumscrewshellisstandard
• 6"TEW18AWGleadsarestandard,otherwiretype
andlengthscanbespecialordered
• Rated660Wat250V
• cULus listed
FORMOREINFORMATIONCALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_E_Part_E.qxd11-12-1311:42AMPage7
Accessories
TAPS, OUTLETS, ADAPTER
ELECTRICAL ACCESSORIES
IS278
SocketReducerAdapterIntermediatetoCandelabra
E-12
I39
15/16"
(23.8mm)
E-17
21/32”to1/2”
Base
Diameter
11/16"
(17.5mm)
• Brassscrewshell
• Convertsintermediatebasetocandelabrabase
IS279
• Simplyscrewsintoexistinglampholder
• Rated75W120V
SocketReducerAdapterMediumtoCandelabra
E-12
1-1/4"
(31.4mm)
E-26
1”to1/2”
Base
Diameter
1-1/16"
(27.4mm)
• Phenolicbodywithbrassscrewshell
• Convertsmediumbasetocandelabrabase
• Simplyscrewsintoexistinglampholder
• Rated75W120V
IS280 SocketReducerAdapterMediumtoIntermediate
E-17
Incandescent
1-1/4"
(31.4mm)
E-26
1”to21/32”
Base
Diameter
1-1/16"
(27.4mm)
• Phenolicbodywithbrassscrewshell
• Convertsmediumbasetointermediatebase
IS281
• Simplyscrewsintoexistinglampholder
• Rated250W250V
SocketReducerAdapterMogultoMedium
E-26
®
C
US
1-7/8"
(47.9mm)
E-40
11/2”to1”
Base
Diameter
1-5/8"
(41.2mm)
• Porcelainbodywithaluminumscrewshell
• Convertsmogulbasetomediumbase
• Simplyscrewintoexistinglampholder
• Rated660W250V
FORMOREINFORMATIONCALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)
Part_E_Part_E.qxd11-12-1311:42AMPage8
Accessories
I40
TAPS, OUTLETS, ADAPTER
ELECTRICAL ACCESSORIES
IS283-BR MediumBasetoPlugBase1-15RAdapter-Brown
IS283-IV AsAboveinIvory
• Phenolicbody
• Parallelslotsfor1-15Ppolarizedplugs
• Screwsintostandardmediumbasesocket
•
•
•
®
C
AvailableinBrownandIvory
Rated660W125V
cULus listed
IS284-BR MediumBaseSocketAdapter-Brown
IS284-IV AsAboveinIvory
• Phenolicbody
• Plugsintoanordinaryoutletandconvertsittoa
lampholdersocket
Incandescent
IS285-BR
IS285-IV
®
C
•
•
•
•
•
•
®
C
US
AvailableinBrownandIvory
Rated660W125V
cULus listed
IS286-BR KeylessTwinSocketAdapter-Brown
IS286-IV AsAboveinIvory
• Phenolicbody
• Screwsintostandardmediumbasesocket
• Convertsasinglesockettoadoublesocket
US
AvailableinBrownandIvory
Rated660W125V
cULus listed
PullChainCurrentTapwithTwoOutlets-Brown
AsAboveinIvory
• Phenolicbody
• Screwsintostandardmediumbasesocket
• Pullchainoperatesthelampholderonly
US
®
C
•
•
•
US
AvailableinBrownandIvory
Rated660W125V
cULus listed
FORMOREINFORMATIONCALL
1-800-661-9610 (Canada) 1-888-762-5384 (USA)