1
2
TABLE OF CONTENTS
Gun Boot® Cases ..........................................
Gun Boot Brackets ........................................
KXP Accessories ...........................................
Grips & Presses .............................................
UTV Gun Rack ...............................................
Gear Rail System ............................................
Lights ...............................................................
Fuel Packs .......................................................
Fuel Pack Brackets .......................................
Stealth Exhaust System ...............................
Basket Racks .................................................
Soft-Sided Luggage .......................................
4-7
8-9
10-13
14-16
17
18
19
20-22
23
24
25
26-31
Hard-Sided Storage (ATV) ............. 32-36
UTV ................................................... 37-44
Stereos .............................................. 45
Accessories ...................................... 46-51
Plows ................................................. 52
Plow Accessories ... ......................... 53
DirtWorks® Series ............................. 54-59
Hitches / Frame Support ................ 60-63
Winches ............................................. 64-65
Winch Application Chart ................. 66
Sweeper & Parts ............................. 67
Cabins ................................................ 68
Disclaimer:
Kolpin reserves the right to make changes in our products without notice as the need arises. At the time of printing,
we believe all specifications and applications are correct but are subject to change. For the latest information on application charts
or instruction manuals, please check our website at www.kolpin.eu. You can also e-mail our customer service directly at
[email protected] or call us at +31 412 693 577.
Limited Warranty:
Kolpin Powersports warrants that their products will be free from defects due to faulty materials or workmanship to the original purchaser for one year with proof of purchase on manufacturing defects. We’re proud of our craftsmanship and topquality materials that result in the superior quality of Kolpin products. This warranty covers products found to be defective under normal
use and conditions. Kolpin Powersports will, at it’s discretion, either repair or replace any defective product covered by this warranty.
Products that are UTV compatible
Products that are made in the USA
3
GU N BO OT S
KOL20025 Impact™
GUN BOOT® 6.0
KOL20025
KOL20020
»
»
»
»
»
»
»
»
»
»
»
Impact™
Transport™
KOL20020 Transport™
Features the largest interior room of all Kolpin Gun Boot cases
Extra room for pistol grip type weapons & small bipods
Easily fits firearms up to 51” (130 cm) in total length
Provides ample room for up to 60mm scopes
Hatchback design allows easy access
Snap close cover with locking capability
Ergonomically designed handle & molded attachment points for a sling
Designed to accommodate left & right hand bolt action rifles & shotguns
Utilizes all existing Gun Boot® IV brackets (sold separately) in order to mount to your ATV or UTV
Not compatible with our UTV specific mounts (KOL20036 & KOL20129)
Compatible with the Utility Gear Rail System (KOL20035 or KOL26510 required)
®
®
(20035 or 26510
REQUIRED)
Impact™ model (KOL20025)
» Includes a removable Velcro, shock absorbing foam & nylon Impact™ liner that provides superior interior
protection
Transport™ model (KOL20020)
» Includes a separate soft carrying gun case that fits within the hard case instead of the standard Impact™
liner.
» Constructed of a durable Cordura exterior with full length zipper access
» Spacious interior includes two layers of dense closed cell foam providing the ultimate in protection,
fit & convenience.
4
“Case within a case”
GUN BOOT® 5.0
Impact™
Transport™
Patent: D477,141
»
»
»
»
»
»
GU N BO OT S
KOL20095
KOL20090
The universal fit built in
bracket adjusts without
the use of any tools.
Gun Boot® case & mounting system all in one!
Universal built-in bracket mounts directly to your ATV rack
Bracket allows for multiple angle adjustments
Provides ample room for firearms up to 51” (130 cm) in length, for 50mm
scopes, & even rifles with slings attached.
Impact™ model (KOL20095)
» Includes a removable Velcro, shock absorbing foam & nylon Impact™ liner that
provides superior interior protection
» Includes a separate soft carrying gun case that fits within the hard case instead
of the standard Impact™ liner
» Spacious interior of two layers of dense closed cell foam providing the ultimate
in protection, fit & convenience
BRACKET FOR GUN BOOT® 5.0
KOL20090B
» Bracket for Gun Boot® 5.0 (KOL20090 & KOL20095)
INLET FOR GUN BOOT® 5.0
KOL20055RB
» Inlet for Gun Boot® 5.0 (KOL20090 & KOL20095)
PIN FOR GUN BOOT® 5.0
KOL66351
» Pin for Gun Boot® 5.0 (KOL20090 & KOL20095)
5
GU N BO OT S
Mossy Oak® Breakup™
Realtree ® All Purpose™
GUN BOOT® IV
(KOL20035 or KOL26510
REQUIRED)
Black
Soft case fits inside the hard case
KOL20061 Mossy Oak® BU
KOL20071 Realtree® AP
KOL20055 Black Transport™
KOL20051 Black Impact™
KOL20050 Black Five Pack
Patent: D421,179
» Most popular & versatile Gun Boot® case for over 10 years!
» The Kolpin ® Gun Boot® IV case has traveled around the world & back & is an industry standard in
hard cases.
» Only model available in Mossy Oak® Breakup or Realtree ® AP camouflage patterns
» Provides ample room for 50mm scopes & even rifles with slings attached or shotguns up to 51”
(130 cm) in length
» Ergonomically designed handle & molded attachment points for a sling
» Designed to accommodate left & right hand bolt action rifles & shotguns
» Utilizes all existing Gun Boot® IV brackets (sold separately)
» Compatible with the Utility Gear Rail System
Impact™ model (KOL20061, KOL20071, KOL20050, KOL20051)
» Includes a removable Velcro, shock absorbing foam & nylon Impact™ liner that provides superior
interior protection
» Includes a separate soft carrying gun case that fits within the hard case instead of the standard
Impact™ liner
» Spacious interior of two layers of dense closed cell foam providing the ultimate in protection, fit &
convenience
6
GUN BOOT® 4.3 WITH UNIVERSAL BRACKET
KOL20205
»
»
»
»
»
»
Includes Gun Boot® case and NEW universal bracket
Removable Velcro, shock absorbing foam & nylon Impact™ liner included
Provides ample room for 50mm scopes & even rifles with slings attached or shotguns
up to 51” (130 cm) in length
Compact design of this NEW bracket provides for universal fitment to most tubular ATV
racks or UTV roll bars
All mounting hardware included to fit 3/4” - 2” (1,9 - 5,1 cm) round tubing and 3/4” - 1 3/4”
(1,9 - 4,45 cm) square tubing
Protects your gun & optics on the trail
Installs quickly & easily
Dimensions are the same as the Gun Boot® IV, please see page 6 for specifics
GU N BO OT S
»
»
»
»
GUN BOOT® 4.3 WITH UNIVERSAL BRACKET
KOL20053
»
»
»
»
TACTICAL GUN BOOT®
»
»
»
»
»
Includes a removable, shock absorbing foam and nylon Impact™ liner.
The hard case has an ergonomically designed handle for comfortable carrying.
Molded attachment points for a sling.
Anatomically designed to accommodate left and right hand bolt action rifles
and shotguns.
Protects your gun and optics on the trail
Installs quickly and easily
The case attaches and removes with the push of a button
All mounting hardware included
Bracket base compatible with Kolpin® Gear Lock and Load™ system (Not
Included)
KOL20100
» Another industry first from Kolpin ® – the only ATV/UTV hard case for
tactical weapons!
» Specifically designed for sporting/tactical rifles up to 112cm in length
» Ample space for 50mm scopes, & even attached bi-pods
» Hinged hatchback design provides quick access with snap close,
lockable lid
» Includes revolutionary soft Transport™ case with full length zipper
that unfolds into a gun rug or shooting mat
» Utilizes Tactical Gun Boot® Bracket (KOL20105) only
» Dimensions (cm): 114 l x 10 w x height varies (front 20,5, rear 33)
7
GU N BO OT BRACKETS
BOOTTECTOR® BRACKET
KOL20035
» Fits Kolpin ® Gun Boot® IV, Gun Boot® 6.0
& Saw Boot cases only!
» Compact design provides more room on
the ATV rack
» Lightweight & extremely durable
» Mounts to nearly all ATV racks
» Adjusts without the use of any tools
» Offers precision gun angle adjustability
» Compatible with the Kolpin ® Utility Gear
Rail System
GUN BOOT® LOOP BRACKET
KOL20032
Patent: 6,705,498
» Fits Gun Boot® IV, Gun Boot® 6.0
& Saw Boot cases only!
» Universal fit mounting
system will accommodate
nearly all ATV racks
» All-metal constructed loop
bracket
» Bracket can be adjusted to
multiple angle positions
between 0° & 45°
» Rubber coated ring holds your Gun Boot® case securely
» Locking pin prevents additional movement & vibration when
bouncing over rugged terrain
» Compact design provides more room on ATV racks
» Can also be mounted to the bed rail of a UTV or to any flat
(drillable) surface!
UTV DOUBLE GUN BOOT® IV
MOUNT
KOL20036
GUN BOOT IV ONE PIECE
BRACKET
®
KOL20029
Patent: D452,290
8
» Fits Kolpin ® Gun Boot® IV & Gun Boot® 6.0
cases only!
» One piece design with superior geometry
» Mounts quickly to either side of your tubular
ATV rack
» Metal wire pin lock keeps Gun Boot® case in
place to prevent vibration & movement
» Pre-set angle design is a perfect fit for intermediate & smaller sized ATV’s
» Gun Boot® IV & Gun Boot® 6 case sold separately
» Fits Kolpin ® Gun Boot® IV case only!
» Mounts to UTV rear mesh or center roll bar
tubing
» Securely mount two Gun Boot® cases (sold
separately)
» Heavy-duty construction with multiple attachment points
» Bracket does not interfere with rear dump box
use
» Fits Yamaha Rhino 2004-2008 Models
» Does NOT fit Polaris/Ranger Models
GU N BO OT BRACKETS
UNIVERSAL GUN BOOT® /SAW
BOOT BRACKET
KOL20200
» Fits Kolpin ® Gun Boot® IV, 4.3, 6.0 cases
and Saw Boot only!
(sold separately)
» Universal bracket fits most ATV
tubular steel racks or UTV frames
up to 5,1cm diameter (Also fits square
tubing)
» All metal constructed loop bracket
» Bracket can be adjusted to multiple
angle positions between 0° and 45°
» Rubber coated ring holds your
Gun Boot® case securely
» Bracket design lets you utilize
your entire ATV rack
TACTICAL GUN BOOT®
BRACKET
KOL20105
» Fits Tactical Gun Boot® case
(KOL20100) only!
» Heavy duty, metal loop
style bracket
» Adjust to multiple angles
between 0° & 45°
for a custom fit on your
ATV
» Locking pin prevents
vibration & movement
» Compact design provides
universal fit to tubular ATV racks
while still leaving room for other
valuable gear.
» Can even be mounted to
your UTV bed rail or
any flat, drillable surface!
IN BED DOUBLE GUN BOOT® 6.0 MOUNT
KOL20005
Fits models: Polaris Ranger*, Polaris Ranger XP, Kawasaki Mule,
Arctic Cat Prowler
KOL20010
Fits models: Yamaha Rhino, Polaris Ranger 400, Kymco UXV,
Kawasaki Teryx
» Secure mount cradles two Kolpin ® Gun Boot® 6.0
cases (sold separately) in the bed of your UTV
» Mounting location does not interfere with rear
visibility
» Compact design allows plenty of bed space
» Accommodates Gun Boot® 6.0 case only (sold separately)
» KOL20005 - Bed dimensions: 120 cm min - 140 cm max
» KOL20010 - Bed dimensions: 110 cm min - 123 cm max
* Ranger Full Size Boxes 2005-current use Kolpin part number
KOL20006 - KXP In Bed Single Gun Boot® Mount on pg. 13
9
KX P ACCES S O RI E S
KXP PLUNGER
KOL98500
KOL98510
POLARIS ATV - 1” Diameter x 1 1/2”
2,54cm Diameter x 3,81cm
POLARIS UTV - 1.25” Diameter x 4 1/4”
3,18cm Diameter x 10,80cm
»
»
»
»
»
Ergonomically designed handle with brass insert
Expanding plunger provides a solid attachment for accessories
Available in two different sizes (ATV & UTV)
Easy installation - no tools required
Quick on/off - change accessories by rotating the power twist
handle
» Compatible with Polaris ® composite ATV racks /UTV bed rails
using the Polaris ® Lock & Ride ® System
Finally.... a selection of Kolpin® Accessories compatible with
Polaris® composite racks and/or bed rails using the Polaris®
Lock & Ride® system!!!
The Kolpin® X-Pansion system (KXP) uses our unique expansion
plunger - Simply attach, tighten with NO tools, & ride! Specially
designed mounting plates line up your Kolpin® accessory perfectly with existing OEM rack mounts. The Kolpin® KXP system provides secure accessory positioning with quick & easy
changeover.
Now you can attach all of our world famous Gun Boot®
cases, including the newest Kolpin® Gun Boot® 6.0 case - all
with a twist of the wrist. Quickly mount our handy Fuel Pack
Jr. for extra fuel on a trail ride... or use our versatile Rhino Grip
holders to carry utility tools... whatever your use requires, we
have you covered!!!
Purchase extra KXP plungers to attach Kolpin® molded boxes
or even your own accessories - the possibilities are endless!
The terms POLARIS & LOCK & RIDE are registered trademarks of Polaris Industries, Inc. Kolpin ®
Outdoors, Inc. is not affiliated with Polaris Industries Inc. & the products shown in this catalog are
not endorsed or sponsored by Polaris Industries, Inc.
10
KOL98500 - ATV
KOL98510 - UTV
UTV
UTV
ATV
ATV
KXP FUEL PACK JR. WITH BRACKET
KXP FUEL PACK BRACKET
KOL89745
KOL89746
KOL89485
KOL89495
POLARIS ATV
POLARIS UTV
» Fuel Pack Jr. (KOL89185) & KXP Pack Bracket in one convenient package!
» Puncture resistant, crush proof, high-density polyethylene makes
it the toughest fuel container available
» Included Pack Bracket securely mounts to front or rear ATV
racks leaving plenty of room for you to pile on all your additional
gear.
» Versatile bracket with ¼-turn action knob allows for quick & easy
removal
» CARB, CPSC & EPA Certified
» Custom design base plate incorporates built-in KXP mounting
system
» Compatible with Polaris ® composite ATV racks /UTV bed rails
using the Polaris ® Lock & Ride ® System
KXP ATV MIRROR
POLARIS ATV
POLARIS UTV
KOL97205
» Constructed of steel with glass infused nylon plastic
turn knob with a brass threaded insert
» ¼-turn action knob allows for quick & easy removal of
the fuel pack from bracket
» Designed to vertically mount the packs leaving plenty
of room for your other gear
» Quick & secure reattachment
» Custom design base plate incorporates built-in KXP
mounting system
» Compatible with Polaris ® composite ATV racks /UTV
bed rails using the Polaris ® Lock & Ride ® System
POLARIS ATV
»
»
»
»
Fully adjustable 10cm mirror
Safely view who is behind you
Easy installation - no tools required
Quick on/off - by rotating the power
twist handle
» Compatible with Polaris ® composite
ATV racks using the Polaris ® Lock &
Ride ® System
KXP POLARIS® SPORTSMAN MOUNTING KIT
FOR FRONT TRAIL BOX (KOL93101)
KOL93103
POLARIS ATV
» Brackets securely mount Front Trail Box KOL93101 (sold separately) to Polaris ® front composite ATV racks 2005-newer using the
Polaris ® Lock & Ride ® System
» Mount kit includes (2) mounting brackets & (2) KOL98500
KXP ATV Plungers & all hardware
» Quick & easy attachment/removal of your Front Trail Box
» Custom design mounting brackets incorporate KXP
mounting system
» Only fits the Kolpin ® Front Trail Box KOL93101 (sold separately)
» Compatible with Polaris ® ATV composite front racks using the Polaris ® Lock & Ride ® System only
11
KXP POLARIS® SPORTSMAN MOUNTING KIT
FOR REAR TRAIL BOX (KOL93201)
KOL93203
POLARIS ATV
» Brackets securely mount Rear Trail Box KOL93201 (sold separately) to the rear composite rack
of your Polaris ATV 2005 - newer using the Polaris Lock & Ride System
» Mount kit includes (2) mounting brackets & (2) KOL98500 KXP ATV Plungers, (2) Kwik
Cinch Straps & all hardware
» Quick & easy attachment/removal of your Rear Trail Box
» Included Kwik Cinch straps provide additional security without drilling your OEM rack
» Custom design mounting brackets incorporate KXP mounting system
» Only fits the Kolpin ® Rear Trail Box KOL93201 (sold separately)
» Compatible with Polaris ® composite ATV rear racks using the Polaris ® Lock & Ride ®
System only
KOL21541 - ATV
KOL21542 - UTV
KXP RATCHETING RHINO GRIP
KOL21541
KOL21542
POLARIS ATV (Pair)
POLARIS UTV (Pair)
» Soft cross pattern rubber grips provide increased cushioning &
gripping power for items in a variety of shapes & sizes
» Heavy duty design carries guns, bows, fishing poles, ice augers, shovels, rakes, farm tools, etc.
» Kwik Clip design for on/off rotational in field adjustments
» Quick release button opens the grip quickly for easy access to gear
» Ratcheting design allows for securing items from 2,5 - 10cm diameter
» Custom design base plate incorporates built-in KXP mounting system
» Compatible with Polaris ® composite ATV/UTV bed rails using the
KXP RHINO GRIP XL
KOL21511
KOL21512
POLARIS ATV (Pair)
POLARIS UTV (Pair)
KXP RHINO GRIP XL DOUBLE
KOL21516
KOL21517
»
»
»
»
»
12
POLARIS ATV (Pair)
POLARIS UTV (Pair)
KOL21511 - ATV
Durable flexible grips cushion & protect while providing a custom fit
Rotates 360˚ & tilts 0˚ - 180˚ in 45˚ increments
KOL21512 - UTV
NEW Kwik clip design for on/off rotational in field adjustments
Custom design base plate incorporates built-in KXP mounting system
Compatible with Polaris ® composite ATV racks /UTV bed rails 2005 newer using the Polaris ® Lock & Ride ® System
KOL21516 - ATV
KOL21517 - UTV
KOL20097
KOL20096
KOL20099
KOL20098
KXP GUN BOOT® 5.0
Impact™ (POLARIS ATV)
Transport™ (POLARIS ATV)
Impact™ (POLARIS UTV)
Transport™ (POLARIS UTV)
» Gun Boot® 5.0 case & mounting system all in one!
» Complete system includes - universal built-in bracket that mounts directly
to your Polaris ® ATV rack / UTV Bed Rail
» Designed to accommodate left & right hand bolt action rifles & shotguns
» Bracket allows for multiple angle adjustments
» Custom design base plate incorporates built-in KXP mounting system
» Compatible with Polaris ® composite ATV racks / UTV Bed Rails using the
Impact™ model
» Includes a removable, shock absorbing foam & nylon Impact™ liner
» Provides ample room for firearms up to 51” (130cm) in length, for 50mm
scopes, & even rifles with slings attached.
ATV Bracket
Transport™ model
» Includes a separate soft carrying gun case that fits within the hard case
instead of the standard Impact™ liner.
The universal fit built in
bracket adjusts without the
use of any tools.
KXP GUN BOOT® IV OR 6.0 LOOP BRACKET
KOL20033
UTV Bracket
KXP IN BED SINGLE GUN BOOT®
MOUNT
POLARIS ATV
» Fits Gun Boot® IV & Gun Boot® 6.0 cases only!
» All-metal constructed loop bracket
» Bracket can be adjusted to multiple angle positions between 0°
& 45°
» Rubber coated ring holds your Gun Boot® case securely
» Locking pin prevents additional movement & vibration when
bouncing over rugged terrain
» Compact design provides more room on ATV racks
» Custom design base plate incorporates built-in KXP
mounting system
» Compatible with Polaris ® composite ATV racks using
the Polaris ® Lock & Ride ® System
KOL20006
KXP BOOTTECTOR® BRACKET
KOL20350
KOL20351
POLARIS FULL SIZE RANGER UTV
» Secure mount cradles ONE Gun Boot® 6.0 case in
bed of your Polaris Ranger® 2005 - current
» Mounting location does not interfere with rear visibility
» Compact design allows for plenty of accessible
bed space
» Compatible with Polaris ® Lock & Ride ® system
» Gun Boot® Case sold separately
» Install as many as SIX Gun Boot® 6.0 cases in the
back of your Ranger!! (additional mounts sold separately)
POLARIS ATV
POLARIS UTV
»
»
»
»
»
»
Fits Kolpin ® Gun Boot® IV & Gun Boot® 6.0 cases only!
Compact design provides more room on the ATV/UTV
Lightweight & extremely durable
Adjusts without the use of any tools
Offers precision gun angle adjustability
Custom design base plate incorporates built-in KXP mounting system
» Compatible with Polaris ® composite ATV/UTV racks using
the Polaris ® Lock & Ride ® System
13
RHINO GRIPS
GRI P S /P RES S E S
All Rhino Grips include -
» Durable flexible grips that cushion & protect while providing a
custom fit
» Rubber securing straps
» Utilize Rhino grips in any vehicle! They are designed to fit trucks,
SUV’s, UTV’s, RV’s, trailers, pretty much anything that has a
smooth surface!
» Sold as a pair (2)
» Fit all tubular ATV racks - drilling required to mount on composite
racks
KOL21500
KOL21505
KOL21520
KOL21525
Single
Double
Window Mount Suction Cup
Window/Wall Mount Adhesive Strip
» Single Grip features off-set mounting to maximize rack space
» Fits all ATV tubular racks
» KOL21520 only - includes (4) industrial grade suction cups for secure
mounting on glass surface
» KOL21525 only - includes industrial strength adhesive strip for secure
mounting on any smooth surface
KOL21510
KOL21515
KOL21530
»
»
»
»
»
KOL21520
KOL21505
KOL21500
XL Single
XL Double
XL Bar Mount
First fully adjustable grip that does not need tools
Rotates 360°
Tilts 0° - 180° in 45° increments
Larger heavy duty mounting base fits tubing 1,9 - 5cm diameter
Kwik clip design for on/off rotational in field adjustments
KOL21525
KWIK CLIP FOR RHINO GRIPS
KOL21530
KOL71509
RHINO GRIP XL UTV MOUNT
KOL21535
14
» Mount directly to your UTV roll bar
» Heavy-duty base provides multiple mounting orientations for UTV roll
bars from 2,2 – 5cm diameter
» Can also be mounted to any vertical or horizontal surface such as your
UTV bed, garage wall, tool box, or just about anywhere!
» Flexible grips are able to tilt between 0° & 180° in 45° increments to
hold gear in a variety of sizes & shapes.
» Sold as a pair (2)
KOL21510
KOL21515
KOL21535
KOL21540
» Soft cross pattern rubber grips provide increased
cushioning & gripping power for items in a variety
of shapes & sizes
» Heavy duty design carries guns, bows, fishing poles,
shovels, rakes, farm tools, etc.
» Kwik Clip design for on/off rotational in field
adjustments
» Quick release button opens the grip quickly for easy
access to gear
» Ratcheting design allows for securing items from
2,5 - 10 cm diameter
» Dimensions: 23 h x 10 cm when opened, 2,5 cm
when closed
RUBBER STRAPS
KOL87010R
Pair
RATCHETING RHINO GRIPS
Replacement Straps(2) for the following products KOL21500 Rhino Grip® - Single
KOL21505 Rhino Grip® - Double
KOL21510 Rhino Grip® XL - Single
KOL21511 KXP Rhino Grip® XL - ATV
KOL21512 KXP Rhino Grip® XL - UTV
KOL21515 Rhino Grip® XL - Double
KOL21516 KXP Rhino Grip® XL Double - ATV
KOL21517 KXP Rhino Grip® XL Double - UTV
KOL21520 Rhino Grip® w/ Suction Cup Mount
KOL21525 Rhino Grip® w/ Adhesive Mount
KOL20072 Gun Grips® II
UNIVERSAL FIT SAW PRESS® II
BRACKET
KOL20044
Patent: D442,454
» Transport your chain saw securely & safely
on any ATV
» Heavy duty, black powder-coated metal
bracket is designed to attach any model
chain saw to an ATV
» Rubber pads provide cushion & tight fit
» Hinged design for quick removal
» Holds saw in vertical position or 45˚ in
either direction
» Accommodates any brand chain saw with
up to 20” (50,8cm) bar
» Fits most ATV’s with tubular racks
UTV GEAR TRANSPORT SYSTEM
KOL26200
» Compatible with Kolpin ® Gear Grips ®, Boottector®
Bracket, Gun Boot® 5.0, Fuel Pack Jr..
» Accommodates round roll bars varying in diameter from 31.75 mm to 50.8 mm
» Mounting angle adjusts in 15˚ increments
15
TOOL PRESS BRACKET
KOL20045
» Heavy duty metal brackets for long-handled
tools like axes, shovels etc..
» Thick rubber lining clamps handles , locks securely
» Holds short handled tools in vertical positions
UTV OVERHEAD GUN CARRIER
KOL20078
» Adjustable length 52 - 72 cm to fit many UTV models (inside of UTV
frame)
» Rubber coated ends protect the frame from scratching
» Foam padding protects your firearms and provides secure fit
» Designed to hold 2 firearms
» No tools required for assembly, easy on / easy off
SAW BOOT
KOL20600
» Secure & protect your chain saw when traversing
over rough terrain
» Fits up to a 19” (48,3cm) bar
» Fits in standard Kolpin ® Gun Boot® brackets - Simply remove your Gun Boot® case & install your Saw
Boot!!!
» Designed to be used with Universal Gun Boot® IV
Bracket (KOL20032 - sold separately), Boottector®
Bracket (KOL20035 - sold separately), or Universal Gun
Boot® / Saw Boot Bracket (KOL20200 - sold separately)
» Saw can be quickly secured/removed with a bungee
tie down
» Included heat shielding allows for carrying a hot
saw
» Universal fit for most ATV racks
16
U T V GU N RACK
UTV GUN RACK RISER MOUNT
KOL20074
UTV GUN RACK
KOL20073
» Riser plate adapts UTV Gun Rack
(KOL20073 - sold separately) for clearance on
machines with raised transmission tunnel
» Will not accommodate the 2008-current Yamaha Rhino model with factory center console
» Fits models with center transmission hump
such as 2004-2007 Yamaha Rhino, 2008
& earlier Polaris Ranger
» Does NOT fit 2013 Polaris ® XP 900
» In cab gun rack mounts to the floor or cargo bed of your UTV or truck for
easy access to your firearms
» Safely & securely hold either a shotgun or scoped rifle
» Constructed with a heavy-duty over-molded butt section to securely hold
the stock of your firearm
» Over molded v-blocks with tough rubber straps provide firearm & barrel
support
» Fits UTV’s with flat floor such as 2009-current Polaris Ranger
» Gun Rack Mount adapter riser (KOL20074) required for Polaris 2008 &
earlier & Yamaha 2007 & earlier utility vehicles with center transmission
hump
» Other specific adaptor plates available
UTV GUN RACK
» Will accommodate a firearm in a protective gun sock
RUBBER STRAPS
» Adjustable height from 70 - 90 cm
» Fully adjustable, angling up to 45˚ in either direction
KOL70732
Pair
» Base Dimensions: 13,3 w x 15,2 cm front to back
» Replacement rubber strap for the Kolpin ® UTV Gun Rack (KOL20073)
» (2) Straps Included
» Please note UTV Gun Rack requires a
total of (2) straps
UTV GUN RACK ADAPTOR
PLATE - TERYX
KOL20076
» Riser plate adapts UTV Gun Rack
(KOL20073 - sold separately) to Kawasaki Teryx
UTV GUN RACK ADAPTOR
PLATE - RANGER MID-SIZE
KOL20077
» Adapts UTV Gun Rack (KOL20073
- sold separately) to Polaris Ranger
Mid-Size
» Mounts securely to existing location on
floor
» **No adapter needed for new 2010-current full size Ranger
17
GEAR RAI L S YS T E M
UTILITY GEAR RAIL SYSTEM
KOL26400
Universal
Specifically cut to fit the following KOL26400PS Ranger
KOL26400YA Rhino
KOL26400JD Gator
KOL26400KC Kymco
Fuel Pack mounted using
extra bracket (KOL26500)
Just a few of the many ways the
Utility Gear Rail System works
for you......
» Stationary rail system mounts behind driver &
passenger on UTV roll bar
» Universal mounting options for many Kolpin ® accessories
» Accommodates Kolpin ® Gear Grips ®, Rhino Grips,
Fuel Packs, Gun Boot® IV, 5.0 & 6.0 cases, Boottector® Bracket, & ATV/UTV Basket.
» Injection molded mounts accommodate tubing sizes
from 3,2 - 5,1 cm
» Rail is made with heavy-duty 7 gauge extruded anodized black aluminum
» Cut-to-fit design
» Includes one versatile Gear Rail Bracket (KOL26500)
» Does NOT fit Commander or Polaris RZR
GEAR RAIL DOUBLE GUN BOOT® MOUNT
KOL26510
GEAR RAIL SYSTEM
ACCESSORY BRACKET
KOL26500
» Mount additional accessories to the Kolpin ® Utility Gear Rail System with this accessory bracket
» Includes c-clamp & metal mounting brackets
» Can be utilized - U-Shaped • Vertical • Horizontal
18
» Everything you need to mount (2) Gun Boot® cases (sold
separately) to the Utility Gear Rail System (KOL26400)
» Includes (1) c-clamp, (2) metal Gun Boot® mounting plates, (2)
Boottector® Gun Mounts, & all necessary hardware
» Separate purchase of Utility Gear Rail System (KOL26400)
required
» Accommodates Gun Boot® IV & 6.0 cases (not included)
** To accommodate multiple accessories, additional Gear Rail System Brackets (KOL26500)
can be purchased separately
LIGHT BARS
»
»
»
»
»
»
»
»
»
»
»
6” LIGHT BAR
8.4” LIGHT BAR
Sealed connector for all-weather applications
Easy two wire installation
Optimizes functional light spread and distance for increased visibility
270 Lumens of output per LED
6” (15,2cm) Light Bar - 2160 Lumens / 1.5 Amps
8.4” (21,3cm) Light Bar - 3240 Lumens / 2.3 Amps
Extruded Aluminum housing with 93% optically pure PMMA lens
IP68 dust and water intrusion rated
Black powder coat with black Kolpin Lens
Switch, wire harness and base mounts included
Dimensions (cm): 6” Light Bar - 15,2 l x 8,3 h x 8,9 w
8.4” Light Bar - 21,3 l x 8,3 h x 8,9 w
LI GH T S
KOL97991
KOL97992
ATV LIGHT BAR
KOL97600
» Universal fit mounting system
» Extruded aluminium frame for durability
» two 55 Watt bulbs delivery up to 3
times the light of high intensity bulbs
and combined with the optional lens
can deliver a 20 degree horizontal
beam with up to 2600 ft. (800 m.)
reflective.
ATV Light Bar
8.4” Light Bar
DUALLY LIGHTS
KOL97994
KOL97995
KOL97996
KOL97997
ADVANTAGES OF LED LIGHTING
»
»
»
»
»
50,000 hour life expectancy
Very high lumens per watt
No glass lens to break
No bulbs to burn out
No ballast to mount
SINGLE FLOOD
SINGLE SPOT
DOUBLE FLOOD
DOUBLE SPOT
» 4 LED per light in a compact package
» Unlimited use for trucks, ATV’s,
UTV’s, trailers, toy haulers, RV’s,
boats, etc.
» 1080 Lumens, less than 1 Amp draw
» No warm up, instant on/off
» No hot spots, vibration or bouncing
beams
» Waterproof
» Off-road use only
» Works great for backup applications
» Switch, wire harness and base mounts
included
BULLiTT LED LIGHT
KOL97993
» Single 10 W Cree LED produces 900
Lumens
» Draws less than 1 Amp
» IP68 dust and water intrusion rated
» Cast aluminum housing
» 50,000 hour life span
» Wire harness included
» Single M6 Mounting Stud
» Dimensions: 5,7 cm diameter
19
Kolpin
®
Fuel Packs aren’t just convenient when transporting fuel on your ATV or UTV. Their versatility provides additional
convenience with unlimited mounting capabilities on your boat, tra i ler, garage wall, camper & more.
FU EL PACKS
Alternative use categories/applications:
Lawn & Garden • Construction • Boating • Land
Lan s caping • RV/Camping • Farm/Ranch • Hunting/Fishing • ATV & Utility Vehicles
20
FU EL PACKS
FUEL PACK
KOL89135
» 4 gallon (15,14 liter) capacity
» Puncture resistant, crush proof, high-density polyethylene
makes it the toughest fuel container available
» Mount to your ATV, UTV, garage wall, camper, boat & more
with pack mount or bracket (sold separately)!
» Legal in all 50 States (USA)!
» Secure flat to ATV rack with included (4) heavy 1” (2,5cm)
wide Velcro straps, letting you stack additional gear on top
» Self-venting & self-closing spout is CARB & CPSC
compliant for spill-proof operation
» Additional mounting options include (2) KOL89435 Pack
Mount & (2) KOL89475 ATV Pack Bracket (sold separately)
» Molded handle for easy transporting & filling
» Compatible with the Kolpin ® Utility Gear Rail System for easy
& convenient attachment to your UTV
» Dimensions (cm): 87,6 w x 7,6 d x 33,7 h
» Center to Center Dimension: 53,7cm
21
FUEL PACK JR.
FU EL PACKS
KOL89185
» 1 1/2 (5,7 liter) gallon capacity
» Puncture resistant, crush proof, high-density polyethylene makes it the toughest fuel container
available
» Mount to your ATV, UTV, garage wall, camper, boat & more with pack mount or bracket (sold
separately)!
» Legal in all 50 States (USA)!
» Self-venting & self-closing spout is CARB & CPSC compliant for spill-proof operation
» Easily mount upright on any ATV rack with our (KOL89475) Kolpin ® ATV Bracket
(sold separately)
» Compatible with the Kolpin ® Utility Gear Rail
» Molded handle for easy transporting & filling
» Mount to any flat (drillable) surface with our versatile (KOL89435) Pack Mount!
» Additional mounting options include KOL89435 Pack Mount & KOL89475 ATV Pack Bracket
(sold separately)
» Dimensions (cm): 29,2 w x 11,4 d x 30,5 h
FUEL PACK JR. WITH BRACKET
FUEL PACK JR. WITH PACK MOUNT
KOL89735
KOL89195
» Fuel Pack Jr. (KOL89185) & ATV Pack Bracket
(KOL89475) in one convenient package!
» Puncture resistant, crush proof, high-density
polyethylene makes it the toughest fuel container
available
» Included Pack Bracket securely mounts to front or
rear tubular ATV racks leaving plenty of room for
you to pile on all your additional gear.
» Versatile bracket with ¼-turn action knob allows for
quick & easy removal
22
» Fuel Pack Jr. (KOL89185) & Pack Mount
(KOL89435) in one convenient package!
» Puncture resistant, crush proof, high-density
polyethylene makes it the toughest fuel container
available
» Mount to your ATV, UTV, garage wall, camper, boat
& more!
» Included Pack Mount is so versatile it allows our
popular Fuel Pack Jr. to be mounted on any flat,
drillable surface.
FUEL / WATER PACK
INCL. SOFT PACKAGE
KOL89600
FUEL PACK BRACKETS
UNIVERSAL ATV FUEL PACK BRACKET
KOL89445
» Universal bracket fits most ATV tubular steel racks or
UTV frames up to 5,1cm
» Also fits square tubing, great application for pontoon boat
rails!
» Constructed of steel with glass infused nylon plastic fuel
pack mounting
» ¼-turn action knob allows for quick and easy removal of
the fuel pack from bracket
» Bracket design lets you utilize your entire ATV rack
» Quick and secure re-attachment
» One bracket required for Fuel Pack Jr. models
» Mount the large, 4 gal. (15 liter) Kolpin Fuel Pack vertically
on your ATV rack with use of (2) Fuel Pack Brackets
ATV FUEL PACK BRACKET
KOL89475
» Constructed of steel with glass infused nylon
plastic turn knob with a brass threaded insert
» ¼-turn action knob allows for quick & easy
removal of the fuel pack from bracket
» Designed to vertically mount the packs on
your tubular
ATV rack, leaving plenty of room for your
other gear
» Quick & secure reattachment
» Mount the large, 4 gal. (15 liter) Kolpin ®
Fuel Pack vertically on your ATV
rack with the use of (2) two Fuel
Pack Brackets
» Uses minimal rack space
» Dimensions (cm): 24,1 h
1/4 turn action
ATV DOUBLE FUEL PACK BRACKET
PACK MOUNT
KOL89465
KOL89435
» Constructed of steel with glass infused nylon plastic
turn knob with a brass threaded insert
» ¼-turn action knob allows for quick & easy
removal of the fuel pack from bracket
» Designed to hold (2) Kolpin Fuel pack Jr.
(sold separately)
» Mountable to any tubular ATV rack
» Uses minimal rack space
» Pack Mount is constructed of tough plastic
for superior strength & durability.
» Versatile mounting system allows brackets
to be attached to any box or flat drillable
surface
» Compatible with the Kolpin ® Utility Gear Rail
System (KOL26400)
23
S T EALT H EX H AU ST
STEALTH EXHAUST SYSTEM 2.0 WITH HEAT SHIELD
KOL53570
Black
Patent: 6,591,935
» The Stealth Exhaust is a secondary muffler designed to be used in conjunction
with your stock system. It is not a replacement for your existing muffler!
» Reduces ATV & UTV exhaust noise by up to 5-7 decibels with no loss in performance!
» Universal design fits most ATV’s or UTV’s with a four-stroke engine
» High flow/low restriction muffler uses baffled design - no packing to burn out
» All mounting hardware & detailed instructions included
» No need for cumbersome welding or vehicle modifications (in most cases)
» Honda Models require an additional adapter (not included)
» Does NOT fit 2013 John Deere XUV 550 or Honda Big Red
» Dimensions: 12.25” long x 4.5” diameter
31,1cm long x 11,4cm diameter
HONDA & UNIVERSAL
BOLT-ON ADAPTER
KOL53520
» Fits Honda TRX 250, 300, 350, 400, 450 &
Universal for other flat or concave OEM Muffler
Outlets
» Includes gasket & self-tapping screws
» 3 1/4” (8,26cm)diameter flange with 1 1/4”
(3,15cm) OD tailpipe
24
HONDA RUBICON
BOLT-ON ADAPTER
KOL53530
» Fits all Honda 500 Rubicon
» Bolts on over OEM Spark Arrester using
existing bolts
» 3 bolt design includes gasket
STEALTH SHORT TURN
DOWN OUTLET
KOL53540
BAS KET RACKS
CONVERTIBLE REAR DROP RACK
KOL53350
» 3 racks for the price of 1
» Convertible welded basket can be used with the rear rack extension in either the
dropped or raised position
» Can use it separately for contained storage on your ATV’s front rack.
» Designed to fit tubular steel ATV racks
» The welded, expanded mesh basket easily transports up to three 5 gallon
(19 liter) buckets, tools, & more!
» Constructed of 1 ½“ (3,8cm) diameter tubing for perimeter support
» Universal fit design
» 1 ¼” (3,18cm) space before drop allows fitment to machines with vertical rear
rack loops
» Welded basket dimensions: 38” l x 13” w x 7 ½” h (96,5 l x 33,0 w x 18,3 h cm)
» Total assembled dimensions: 40 ½” x 27 ¼” x 10” (102,9 x 69,2 x 25,4 cm)
» weight 28 lbs. (12,7 kg)
FLAT BASKET
KOL53400
» 1 1/2” (3,8cm) steel tubing for perimeter support
» Bolt together design allows for standard UPS shipping
» Powder coated matte black finish
» Welded expanded metal mesh to contain small items
» Mounts to front or rear of ATV
» Flat design increases rack space
» Built-in tie down points
» 1 ¼” (3,18cm) space at 16” 40,6cm) allows fitment
to machines with vertical rack loops
» Assembled dimensions: 40” l x 33” w x 6” h
(101,6 l x 83,8 w x 15,2 h cm)
FRONT GEAR BASKET
REAR DROP RACK
KOL53360
KOL53300
» Easily add extra front or rear storage to your ATV
» Transport up to three 5 gallon (19 liter) buckets,
tools, & more!
» One-piece, welded expanded metal design can
handle any task & any terrain.
» Universal fit to any front or rear tubular rack.
» Perfect for use on the trail, farm, ice fishing, or just
about anywhere!
» Dimensions: 38” l x 13” w x 7 ½” h
(96,5 l x 33,0 w x 19,1 h cm)
» weight 16 lbs. (7,26 kg)
» Black powder coated steel construction offers the strength
of traditional metal baskets
» Drop basket includes fold down tailgate & cable supports
» Inside drop area dimensions are 12” x 37 ½” (30,5 x 95,3 cm)
with an 8” (20,3cm) drop
» 1 1/4” (3,18cm) space 16” (40,6cm) before drop allows fitment on machines with vertical rear rack loops
» Fits three 5 gal (19 liter) buckets with the tailgate closed
» Perfect for use on the farm, ice fishing, or just about anywhere!
25
MATRIX™ SEAT BAG
S O FT LU GGAGE
KOL91150
KOL91151
KOL91155
Trail Tan
Black
» Constructed of 600D nylon with exclusive Hydro Shield™
coating and UV protection coating
» Padded, back rest style seat for added comfort
» Features multi-piece, detachable gear bags with center Matrix cooler
» Center Matrix cooler section keeps up to a 12-pack of beverages cold
with room for additional goodies.
» Patented water bottle holder zips out only when you need it
» Exterior shock-cord provides even more storage for your items such as
gloves & jackets!
» Includes two removable gear bags with gusseted wet/dry
compartments & water bottle pockets
» Web reinforced buckles attachments secure to any ATV rack
» 2.02 cubic feet (0,06m³) of accessible storage
» Overall Dimensions 32” x 22” x 11” (81,3 x 55,9 x 27,9 cm)
» Side Pod Dimensions: 16” x 6” x 8” (40,6 x 15,2 x 20,3 cm)
» Available in black, trail tan & Mossy Oak® Breakup ™
Black
Cooler with Matrix™ grid to
hold beverages & containers
Cooler bag detaches for easy transport
Realtree® All Purpose™
TRAILTEC GEAR BAG
REAR SEAT BAG
KOL91191
KOL91192
26
Black
Realtree ® AP™
KOL91160
KOL91161
Black
» Constructed of 600D nylon
» Zipperless Design
» Quickly attaches to ATV rear rack using adjustable straps & quick release
buckles
» Two spacious side pods & one rear pod for organization
» Includes padded seat for comfort & relaxation
» Available in Black or Realtree ® AP
» Overall Dimensions: 34.5” l x 19” w x 10.5” h (87,6 l x 48,2 w x 26,7 h cm)
» Side Pod Dimensions: 18” x 8” x 7.5” (45,7 x 20,3 x 19,1 cm)
» 1.75 cubic ft (0,05m³) of storage
»
»
»
»
»
»
»
»
»
»
Black
Realtree ® AP™
Low profile, zipperless design
Black
UV protection coating
Use on front or rear rack of your ATV
Form-fitted rain/dust cover included
Internal Sta-Con frame construction maintains bag shape and provides extra protection for your cargo
Two metal cam buckles for quick/secure attachment
Fully lined interior is light grey in color for high visibility
Reflective material enhances visibility to provide a safer riding experience
Dimensions: 13” l x 28” w x 9.5” h (33,0 l x 71,1 w x 24,1 h cm)
2 cubic ft (0,06m³) of storage
KOL91165
KOL91166
Black
S O FT LU GGAGE
TRAILTEC CARGO BAG
Black
Realtree® AP™
» Zipperless Design
» UV Protection coating
» Adjustable interior divider allows for gear
organization & added protection
» Form-fitted rain/dust cover included
» Internal Sta-Con frame construction maintains bag
shape & provides extra protection for your cargo
» Two metal cam buckles for quick/secure attachment
» Fully lined interior is light grey in color for high visibility
» Reflective material enhances visibility to provide a
safer riding experience
» Dimensions: 15” l x 36” w x 14.5” h
(38,1 l x 91,4 w x 36,8 h cm)
» 4.5 cubic ft (0,13m³) of storage
TRAILTEC DELUXE CARGO BAG
KOL91175
KOL91176
»
»
»
»
»
»
»
»
»
»
»
»
»
»
»
Black
Realtree® AP™
Our largest available cargo bag
Zipperless Design
UV Protection coating
Removable, roll-top cooler & accessory pods
Easily fits up to 3 adult sized helmets with cooler removed
Form-fitted rain/dust cover included
Internal Sta-Con frame construction maintains bag shape & provides extra
protection for your cargo
One removable center cargo divider
Two metal cam buckles for quick/secure attachment
Fully lined interior is light grey in color for high visibility
Reflective material enhances visibility to provide a safer riding experience
Overall Dimensions: 22.5” l x 36” w x 14.5” h (57,2 l x 91,4 w x 36,8 h cm)
Side Pods: 7.5” l x 9” w x 11” h (19,1 l x 22,9 w x 27,9 h cm)
Back Rest: 17” (43,2cm) w
4.96 cubic ft (0,14m³) of storage
Black
27
S O FT LU GGAGE
TRAILTEC CROSSOVER SERIES
FRONT/REAR BAG
KOL25121
KOL25122
KOL25123
KOL25124
KOL25121 Red
KOL25123 Blue
KOL25122 Yellow
KOL25124 Green
Red
Yellow
Blue
Green
The convenience of less bulky soft luggage, but rigid on the trail,
Trail-Tec Crossover is a stylish and versatile solution for hauling
your gear!
The zipperless rubber molded, hinged lid is not only stylish, but
also provides added protection. Trail-Tec bags come with the
longest and strongest warranty in the industry!
» Zipperless design for easy access at anytime
» Industry first, crossover design offers the structure of hard
luggage with the convenience of less bulky soft luggage
styles
» Higher buckle attachments for easy on/off any ATV rack
» Constructed of 600 denier nylon with durable, non-skid
1200 denier HD bottom to ensure your gear stays with you
on the trail
» Industry leading 3 year warranty against defects, material
and workmanship
» Dimensions: 15.5” x 29” x 10.5”
(393,7mm x 736,6mm x 266,7mm)
EVOLUTION COOLER BAG
KOL91171
KOL91170
Black
This soft-sided, yet structured cooler bag includes a
removable, roll-top cooler that keeps up to a 24-pack
of your favorite beverages cold! Compact and
lightweight – perfect for long rides.
» Metal cam buckles for quick/secure attachment
» Dimensions: 12” l x 12” w x 10.5” h
(304,8mm x 304,8mm x 266,7mm)
28
Realtree®
All Purpose™
“I make my living traveling around the world from
one adventure to another, which demands using
only the best equipment available. The TerrainTec Roller and Duffle Bag are just what we need
to get the job done”
– Brian Fisher, Host & Executive Producer
of Fisher’s ATV World
S O FT LU GGAGE
Designed by riders for riders, our
Terrain-Tec bags are designed to get
you to, and through,
your next ATV adventure. The revolutionary design can withstand the
abuse of any trail
or airport, offering you portability
and peace of mind.
TERRAIN-TEC ROLLER BAG
KOL92170
KOL92171
Black
Realtree® AP™
» Secure to any ATV with web reinforced buckles
» Included rain/dust cover for additional protection from the
elements
» Industry standard wheels for heavy load capacity and easy
navigation
» Ultra smooth, lockable zippers
» 2 position, telescoping aluminum handle and integrated,
ergonomical padded hand holds for easy transport on the
tarmac or trail.
» Travel approved
» Dimensions: 13” l x 20” w x 7” h
(330,2mm x 508mm x 177,8mm)
» 1 cubic ft (0,03m³) of accessible storage
KOL92176
KOL92175 Black
TERRAIN-TEC DUFFLE BAG
KOL92175
KOL92176
Black - Fisher Adventure Series
Realtree® AP™
» Secure to any ATV with 1 ½” (3,8cm) webbing and extra
large, web reinforced buckles
» Included rain/dust cover for additional protection from the
elements
» Oversize, 4” (10,2cm) wheels for heavy load capacity and
easy navigation
» Hidden, telescoping aluminum handle and integrated, ergonomical hand holds for easy transport on the tarmac or
trail.
» Travel approved
» Dimensions: 30” l x 16” w x 16” h (762mm x 406,4mm x
406,4mm)
» 4.44 cubic ft (0,13m³) of accessible storage
29
TANK BAG
S O FT LU GGAGE
KOL92140
KOL92145
Black
Black
Mossy Oak® New Breakup™
Black
Add additional storage space and convenient,
waterproof map access to your ATV without
interfering with your ride. Durable pockets constructed of 600 denier nylon with Hydro Shield™
coating keep your necessities within your reach
and Mud Guard™ zippers and zipper flaps prevent debris from entering the bag when on the
trail. Improved design features shock cord tie
downs for secure fit to tank and Rhino Armor™
reinforcement in high wear areas for extra durability and protection. Patented water bottle holder
zips out only when you need it.
» 35 cubic feet (0,99m³) of accessible storage
» Dimensions of each pocket are:
8” x 10” x 4” (203,2 x 254 x 101,6mm)
» Available in Black and Mossy Oak® New
Breakup™
Cooler pocket keeps your
refreshments cool
Pockets within pocket
system to transport all
your items
REAR CARGO BAG
KOL92125
Black
Constructed of 600 denier nylon with Hydro Shield™
coating, dirt and mud won’t stick while Rhino Armour™
reinforcement in all high wear areas
provides extra durability mile after mile on the trails.
Mud Guard zippers and zippered mud flaps prevent debris from entering the bag. Highly engineered design includes reinforced, internal surround to maintain luggage
shape and adjustable divider provides extra protection
to all your valuable gear. Easily attach with the web
reinforced buckles to any ATV!
» 1.77 cubic feet (0,05m³) of accessible storage
» Dimensions of main storage compartment:
31” x 13” x 11.5” (787,4 x 330,2 x 292,1mm)
of each (2) side compartment:
9” x 5” x 10” (228,6mm x 127mm x 254mm)
30
ATV/UTV UTILITY BAG
KOL94110
Black
This bag features two large gatemouth openings for easy access. One gatemouth pocket
features durable heavy nylon lining with
four sturdy interior pockets to organize your
tools, the other gatemouth pocket features
smooth nylon lining and three convenient
mesh pockets to organize your gear. But the
features don’t stop there - two front storage
pockets, with MudGuard zippers and flaps,
keep your cell phone, pens and other small
gear organized. And you can’t forget the large
rear cooler pocket that keeps up to 6 of your
favorite beverages cool! We even included a
LED light to assist in finding your gear in those
early morning hours when trying to get to your
stand or blind and a built in rain cover for additional protection from the elements.
» 13” x 20.5” x 10”
(330,2mm x 520,7mm x 254mm)
KOL92151
Trail Tan
Black
FRONT REAR BAG
KOL92135
Black
Low profile luggage designed specifically not to
interfere with visibility or headlights when used on
the front rack of any ATV. Dash access pocket
system keeps your GPS, phone, camera and other items within reach when on the trail. Patented
water bottle holder zips out only when you need
it, and exterior shock-cord provides even more
storage for your items such as gloves and jackets!
It is also a great size for use on the rear rack of
intermediate and youth machines.
Constructed of 600 denier nylon with Hydro
Shield™ coating, dirt and mud won’t stick while
Rhino Armour™ reinforcement in all high wear
areas provides extra durability mile after mile on
the trails. Highly engineered design includes
reinforced, internal surround to maintain luggage
shape and provide extra protection to all your
valuable gear. Easily attach with the web
reinforced buckles to any ATV!
» .71 cubic feet (0,02m³) of accessible storage
» Dimensions 28” x 13” x 8”
(711,2mm x 330,2mm x 203,2mm)
Pockets within pocket
system to transport all your
items
Trail Tan
Add additional storage space and convenience to
your ATV or UTV without interfering with your ride.
Durable pocket constructed of 600
denier nylon with Hydro Shield™ coating keep your
necessities within your reach and Mud Guard™ zippers and zipper flaps prevent debris from entering
the bag when on the trail. Improved design attaches
securely to any ATV rack and shock cord tie downs
for secure fit to fender. Or conveniently attach to
your UTV with versatile buckle attachment system.
Rhino Armor™ reinforcement in high wear areas for
extra durability and protection. Patented water bottle
holder zips
out only when you need it.
» .12 cubic feet of accessible storage
» Dimensions of each pocket are:
8” x 15” x 4.5”
(203,2mm x 381mm x 114,3mm)
LUGGAGE SET BLACK
KOL92410
Black
5 Pieces luggage set containing:
» Heavy Duty Hydro Shield Exterior.
» Attractive Black Styling
» Front/Rear Bag -Hand Mitts (pair)
» Fender Bag (2X)
CARGO BAG
FRONT / REAR CARGO BAG
KOL93510
KOL93540
Mossy Oak
» Heavy duty water repellent exterior
» Rhino Hide reinforced corners for extra
durability
» Completely lined with black nylon
» Collapsible design allows luggage to lay
flat or keep standing position
» Divided compartments seperates gear
» Mud guard zipper prevents debris from
entering the case
S O FT LU GGAGE
FENDER BAG
Mossy Oak
» Heavy duty water repellent exterior
» Rhino Hide reinforced corners for extra
durability
» Completely lined with black nylon
» Collapsible design allows luggage to lay
flat or keep standing position
» Mud guard zipper prevents debris from
entering the case
31
H ARD LU GGAGE
ATV REAR LOUNGER WITH COOLER
KOL4421
» Heavy duty, Rotomolded, & uv-stabilized LLDPE
(linear low-density polyethylene) construction
» Perfect for transporting gear & other items
» Relax comfortably on the trail with integrated
backrest, armrests & seat cushion
» Convenient arm storage compartments
» Mounts to most tubular racks using four U-bolts
& sealing washers
» Center cooler has removable drain plug
» 2.5 cubic feet (0,07m³) of weather resistant storage
in arms
» Cooler Dimension: 13” l x 4” w x 6.5” h
(33,0 l x 10,2 x 16,5 h cm)
» Dimensions: 39.75” l x 27.88” w x 17” h
(101,0 l x 70,8 w x 43,2 h cm)
ATV REAR LOUNGER WITH
HELMET STORAGE
KOL4438
» Perfect lounger with easy storage access
» Heavy duty, Rotomolded, & uv-stabilized LLDPE
(linear low-density polyethylene) construction
» Accommodates up to two adult helmets or other large
items
» Mounts to most tubular racks using four U-bolts &
sealing washers
» Opens in the rear with access to arm cavities
» 3.5 cubic feet (0,1m³) of weather-resistant storage
» Dimensions: 36.75” l x 27.88” w x 17” h
(93,4 l x 70,8 w x 43,2 h cm)
B
C
D
E
(base)
KOL4421
96,5
30,5
61,0
53,3
33,0
41,9
KOL4438
95,3
27,9
66,0
55,3
33,0
38,1
* Approximate Measurements in cm.
32
F
A
Economical rotomolded storage boxes
Single wall construction
Molded in hinges
Pin lock latch can be replaced with a padlock
for security
H ARD LU GGAGE
»
»
»
»
ATV FRONT STEREO BOX
KOL4435
»
»
»
»
Heavy duty, Rotomolded, construction
1.5 cu ft (0,04m³) of weather-resistant storage
Clear polycarbonate windscreen for protection
Two braided stainless-steel lanyards that hold the dry storage compartment open for easy access
» Mounts to most tubular or composite racks
using four U-bolts & sealing washers
» Can be utilized with our Kwik-Cinch System (KOL98400)
Face Plate Features:
»
»
»
»
»
»
Jensen MSR 2010 weatherproof, wired remote with display
Single line dot matrix display with blue backlight
Selectable US/Euro frequency tuner
Sirius Ready (requires additional software)
UV resistant front panel
All stereos/speakers made in
Corrosion resistant
the USA
NAVIGATOR BOX
KOL93405
»
»
»
»
»
»
»
»
Conveniently sized storage box
Rotomolded construction with snap closure
Rear hinged lid won’t warp or dent
Molded in rear step design allows box to be mounted with no rack modifications
Mounts to most tubular racks using four U-bolts & sealing washers
4.3 cubic feet (0,12m³) of accessible storage
Dimensions: 36” l x 19” w x 14” h (91,4 l x 48,3 w x 35,6 h cm)
Front to back base footprint - 14” (48,3cm)
OUTFITTER BOX
KOL93450
» Largest hard-sided storage box offered by Kolpin ®
» Easily accommodates 4 adult sized helmets & more!!!
» Reinforced structure accepts (2) Fuel Pack Jr.’s with mounting
brackets
» Lid has molded-in tray & double wall construction for extra storage capacity & rigidity
» Includes Kwik-Cinch straps for quick on/off attachment & metal
Accessory Rack for increased load carrying capacity
» Fits most ATV tubular & composite racks
» Dimensions: 42.5” l x 21.5” w x 16.75” h
(108,0 l x 54,6 w x 42,6 h cm)
» Front to back base footprint - 13” (33,0cm) in the center between the rear of the seat to the rear of the rack, 19” (48,3cm)
on the outside
33
H ARD LU GGAGE
SCOUT BOX
KOL93400
»
»
»
»
Low-profile front or rear box
Rotomolded construction with snap closure
2.5 cubic feet (0,07m³) of accessible storage
Dimensions: 34” l x 14” w x 9” h
(86,4 l x 35,6 w x 22,9 h cm)
» Mounts to most tubular racks using four U-bolts
& sealing washers
FRONT TRAIL BOX
KOL93101
» Contoured design allows for minimum sight reduction while operating ATV
» Great storage for supplies & equipment
» Double wall lid construction for added rigidity
» Roto-molded UV-stabilized LLDPE (linear lowdensity polyethylene) construction
» Separate heavy duty keyed lockable center
latch
(76,8 l x 34,3 w x 22,4 w cm)
» If mounting on a 2005-current Polaris ® ATV with
Lock & Ride ® front rack, use our KOL93103 Accessory Mount Kit
REAR TRAIL BOX
KOL93201
» Contoured design allows for maximum use of
rack space
» Large storage area that fits up to 2 XL helmets with extra storage room
» Double wall lid construction for added rigidity
allows for extra weight of the optional Accessory rack (KOL93202 - sold separately)
» Roto-molded UV-stabilized LLDPE (linear
low-density polyethylene) construction
» Separate heavy duty keyed lockable center
latch
» Dimensions: 37” l x 17.3” w x 13.6” h
(94,0 l x 43,9 w x 34,5 h cm)
» Fits most machines including the BRP Outlander Max
» If mounting on a 2005-newer Polaris ® ATV,
use our KOL93203 Accessory Mount Kit
BUCKET HUGGER™ II
KOL91750
ACCESSORY RACK
KOL93202
» Designed to be used with Kolpin ® Rear Trail Box (KOL93201 sold separately)
» Heavy duty 1/2” (1,27cm) tubular steel construction
» Threaded tubular ends allow for easy mounting on molded
box lids
» Holds up to 150 lbs. (68kg)
» Dimensions: 26” l x 8.5” w (66,0 l x 21,6 w cm)
34
» Molded design cradles up to (2) 5 gallon
buckets & (1) Fuel Pack Jr. securely (not
included)
» Removable, snap closure lid provides additional security when transporting gear
» Great for hauling all your gear whether
hunting, ice fishing,
landscaping or just hitting the trails
» Mounting hardware included
» Dimensions: 27” l x 14.5” w x 8.5” h
(68,6 l x 36,8 w x 21,6 h cm)
KOL4420
H ARD LU GGAGE
ATV BUCKET STORAGE
Including Front Box
Two storage boxes for the price of one! Unique design allows for carrying the front box (included), rear storage box
that can accommodate two 5-gallon buckets, or any combination of the three. That’s over 3 cu ft of storage space for
all your gear, plus the ability to haul two 5-gallon buckets!
Heavy duty, rotomolded, and uv-stabilized LLDPE (linear
low-density polyethylene) construction stands up to any
chore or task. Conveniently includes a comfortable backrest, two drink holders, and side storage compartments that
provide nearly 1.0 cubic feet of weather resistant storage
with secure draw-tight latches.
KOL4420
Mounts to most tubular or composite racks using four Ubolts and sealing washers OR for even more convenient attachment, utilize our new Kwik-Cinch System (KOL98400).
(1225mm x 644,4mm x 365,25mm)
CONTOURED CARGO BOX
KWICK-CINCH SYSTEM
KOL93200
KOL98400
If you are looking for a great ATV Cargo box for
the rear of your quad, you’ve found it! This is a
BIG cargo box – it easily fits 2 adult size helmets
and tons more gear! Stylish, contoured design
fits great on the rear rack of your ATV while
leaving ample room to ride. Wrap-around design
makes this box a great option for use on 2-up
machines (especially the Can-Am Outlander XT)!
The rear of the box hugs the seat providing clearance without extending beyond the edge of the
rear rack.
Only Kolpin offers the fastest, most convenient system to attach various hard storage accessories to your ATV rack.
Switch from your utility box to your seat lounger to your open rack space in a cinch!
Constructed of durable polyethylene with
weather tight gasket – it seals out mud, dirt and
debris. Rhino Rib™ reinforcement provides extra
strength mile after mile and bump after bump.
*Not intended for passenger use
Kolpin Kwik Cinch System eliminates the cumbersome mounting procedures of using traditional hardware to attach hard
storage accessories to your rack. Innovative design provides you with the flexibility to easily switch out your seat lounger
to utility box in seconds! Just attach the two galvanized steel plates to your storage accessory - secure the heavy duty
nylon straps with PVC coated hooks to the attachment plate and your rack – cinch with the Cam-lock buckle to quickly
secure. No tools needed for on/off attachment of your storage accessory - it’s that easy!
Manufacturer recommends the use of (6) Kwik Cinch straps and attachment plates for use with ATV loungers*, seat
boxes* and larger utility boxes.
» Dimensions: 36 ½” l x 17” w x 13” h
(927.1mm x 444.5mm x 330.2mm)
HINGE KIT FOR KOL93200
KOL73102
1. Attach
2. Cinch
3. Go!!
35
H ARD LU GGAGE
LEGACY LOUNGER
KOL4447
» The perfect lounger with easy storage access
» Accommodates up to two adult helmets or
other large ietms
» Heavy duty, black rotomolded, and uv-stabilized LLDPE (linear low-density polyethylene)
» Easily mounts to tubular or compositie racks
using four u-bolts and sealing washers
» Includes comfortable padded backrest and
seat cushion
» Lockable latch
KOL4447
KOL93206
SEAT CUSHION & BACKREST
KOL93206
» Available in black
KOL91710
CARGO TRAY FRONT / REAR
KOL91710
» Molded side handles
» Holds up to two 20 liter buckets, tools and gun
grips
» Polypropylene double walled construction
» Reinforcment on bottom and body provides
extra durability
(914,4mm x 457,2mm x 254mm)
36
UTV
RHINO
RHINO CROSSOVER TOOL BOX
KOL1479
» Constructed of heavy duty, Rotomolded, & uv-stabilized LLDPE
(linear low-density polyethylene)
» Provides weather resistant storage for your valuable tools & gear
» Lockable gull wing doors can be easily accessed from either side
of your utility bed
» Scissors-type locking strut hold lids open for convenient access
» Fits all Rhino Models
» Bed Dimensions: 43.75” min x 54” max
RHINO LIGHT BAR
KOL1420
(LIGHTS NOT INCLUDED)
Black rotational-molded, foam-filled plastic construction for long life. Easy installation using the
vehicle’s existing mounting points.
» 49.5” w x 19.5” d x 7” h
(125,7 w x 49,5 d x 17,8 h cm)
» All stainless-steel covers and hardware
» Accepts most light packages up to 4”
(10,2cm) in diameter (lights not included)
RHINO UNDER SEAT POWER WASHER
KOL1480
Have you ever found yourself wiping that muddy windshield with the sleeve of
your shirt just to smear it up more? What did you do then … try to driving the 10
miles of trail back hunched over trying to look out that tiny spot at the bottom
of the windshield that has the least amount of smudge, or better yet with your
head hanging out the side of the roll cage? With our under seat power washer
that NEVER has to happen to you again. It easily installs out of the way under
your driver seat and holds and astonishing 3.75 gallons (14,2 liter) of water! The
self-priming, 12 volt pump operates at 60 psi (4,1 bar)to conveniently clean off
windshields, radiators, or even passengers while out in remote locations.
» Easy access to power and hose connection
» Includes 8 ft (244cm) coiled hose and spray gun
RHINO BACK PANEL WITH WINDOW
KOL1452
Keep all your gear and passengers separate with this
convenient a protective rear shield with sliding back
window and screen. Constructed of black rotationalmolded, foam-filled plastic construction for durability
and long life. Designed to integrate with Rhino Slim Line
Roof. Custom-designed mounting hardware.
Fits models 2010 & earlier
RHINO COOLER TRUNK
KOL1478
» Constructed of heavy duty, Rotomolded, & uv-stabilized LLDPE (linear
low-density polyethylene) with foam insulated body
» Unique design allows for convenient storage, separating ice & beverages
from your dry goods
» 2 large wet/dry storage areas with drain plugs
» Provides 1.0 cu ft of storage in each area
» Center wet/dry storage area with removable lid, storage tray, & drain plug
» Center area provides .4 cu ft of additional secure storage
» Fits all Rhino Models
» 46” (116,8cm) w (42 ½” (108cm) between the bed rails) x 24” (61cm) l (frontback) x 17 ¼” (43,8cm) h
37
UTV
TERYX
TERYX COOLER TRUNK
TERYX CENTER CONSOLE
KOL1489
KOL1490
» Constructed of heavy duty, Rotomolded, & uv-stabilized LLDPE (linear low-density polyethylene) with foam insulated body
» Unique design allows for convenient storage, separating ice & beverages from your dry goods
» Center wet/dry storage area with removable lid, storage tray, & drain plug
» Fits all Teryx Models
» 46” (116,8cm) w (42 ½” (108cm) between the bed rails)
x 24” (61cm) l (front-back) x 17 ¼” (43,8cm) h
» Features a weather resistant storage
compartment with lid & two cup holders.
» Easy installation – mounts with only two
fasteners
» Fits models 2009 & earlier
RZR®
RZR COOLER TRUNK
KOL2004
38
» Constructed of heavy duty, Rotomolded, &
uv-stabilized LLDPE (linear low-density polyethylene) with foam insulated
body
» Unique design allows for convenient storage, separating ice & beverages
from your dry goods
» Center wet/dry storage area with removable lid, storage tray, & drain
plug
» Fits standard models 2010 & older (not RZR-S)
» 46” w x 21 ½” w (front-back) x 16 ½” h
(116,8cm w x 54,6cm w (front-back) x 41,9cm h)
UTV
RZR SPORT ROOF STEREO CONSOLE
KOL2003
Is there anything better than hitting the trails with your RZR? How about hitting the trails and
bringing your favorite tunes along for the ride? Now you can do just that with this innovative stereo
console for your UTV. Black rotational-molded plastic construction protects your stereo from the
elements and includes two marine-grade, 75W speakers with wiring harness. The included cover
plate allows for the installation of a marine-grade car/boat stereo (not included).
» All stainless-steel hardware and cover plates
» Marine-grade car/boat stereo is not included
Fits models 2010 & earlier
RZR OPEN BED STORAGE
RZR FRONT BOX
KOL2005
Are you always looking for a place to stuff your
stuff? The RZR Front Box
provides an additional 1.6 cu ft of weather resistant
storage space on your RZR. Perfect for storing jackets, blankets, tow straps, etc… Best of all the rugged
design blends in perfectly with your RZR’s existing
body style making your buddies think it came off the
assembly line attached. Easy installation using your
vehicles existing mounting points
Dimensions: 35.5” l x 29.5” w x 9.625” h
(90,1 l x 74,9 w x 24,5h cm)
KOL2006
Is the bed of your RZR just not big enough or deep enough to
haul the gear you’d like to? Check out this rugged, yet stylish
Open Bed Storage accessory. The durable construction and
innovative design provides additional storage space then your
standard RZR bed. Perfect for storing and organizing your
tools, supplies and other essential gear. Best of all the rugged design blends in perfectly with your RZR’s existing body
style making your buddies think it came off the assembly line
attached. Innovative design fits your RZR bed perfectly for
easy installation
Dimensions: 46.5” l x 25” w x 14.5” h
(118,1 l x 63,5 w x 36,8 h cm)
Fits models 2010 & older (not RZRS)
Fits models 2010 & older
39
UTV
RZR FULL-VENTED WINDSHIELDS
RZR FULL-TILTING WINDSHIELDS
RZR REAR SHIELD / BACK PANEL
KOL2007
KOL2010
KOL2009
» Not only protects - vents provide additional airflow
» 1/4” (0,6cm) abrasive-resistant GE Lexan MR10
(Unless noted otherwise)
» Extremely durable injection molded clamps
» All stainless steel, black coated finish hardware
» Easy to install
40
» Versatile three-position tilt mechanism: closed;
half-extension and full-extension
» 1/4” (0,6cm) abrasive-resistant GE Lexan MR10
(Unless noted otherwise)
» Easy to install
» Provides an effective barrier to keep debris from
entering the cab
» 1/8” (0,3cm) FMR GE Lexan rear shield (Unless
noted otherwise)
» 3/16” (0,5cm) high-density polyethylene lower
panel construction
» Easy to install
RANGER®
RANGER FRONT TRAIL BOX
» Additional gear storage for your Ranger
» Easy installation to your Ranger’s existing
mounting points
» Rugged, roto-molded design includes
KXP mounting points that are Polaris
Lock & Ride compatible
» Conveniently attach KXP accessories
such as Rhino Grips for added hauling
versatility
» Fits full size Ranger models 2009-current
» Does NOT fit 2013 Ranger XP 900
RANGER CROSSOVER
TOOL BOX
KOL2690 Ranger Mid Size 2010-current
KOL2691 Ranger Full Size 2005-current
» Constructed of heavy duty, Rotomolded,
& uv-stabilized LLDPE (linear low-density
polyethylene)
» Provides weather resistant storage for
your valuable tools & gear
» Lockable gull wing doors provide shallow
storage
» Main hinged lids can be easily accessed
from either side of your utility bed
» Scissors-type locking strut hold lids open
for convenient access
» Attachment plates & (4) KXP plungers
included
» Bed Dimensions: 43.75” min x 54” max
(111,1 min x 137,1 max cm)
UTV
KOL2692
RANGER COOLER TRUNK
KOL2680
» Constructed of heavy duty, Rotomolded, & uv-stabilized LLDPE (linear low-density polyethylene) with foam
insulated body
» Unique design allows for convenient storage, separating
ice & beverages from your dry goods
» Center wet/dry storage area with removable lid, storage
tray, & drain plug
» Attaches with KXP Plungers (included)
» Fits all Ranger full size Models 2005-current
» Molded Cooler Trunk dimensions are 46” (116,8cm) w
(42 ½” (108cm) between the bed rails)
x 24” (61cm) l (front-back) x 17 ¼” (43,8cm) h
41
UNIVERSAL
UTV
OVERHEAD CONSOLE
WITH MIRROR
KOL4480
UTV SADDLE STORAGE BOX
KOL4408
Single
» Easy installation to inside bed rails of most
utility vehicles
» Provides 1.375 cu ft (0,04m³) of weather
resistant storage
(68,3 l x 12,4 w x 37,5 h cm)
» Provides additional overhead storage
» UTV rear mirror included
» Rear mirror features a convex lens
providing high visibility over rough
terrain
» Rear mirror is easily adjustable
» Universal clamps attach to roll bars
even with a roof installed
» Fits 1 3/4” (4,45cm) roll bars only
» Dimensions: 9.25”l x 5.5”w x 6”h
(23,5 l x 14,0 w x 15,2 h cm)
BENCH CENTER CONSOLE
KOL4470
» Easily access necessary gear
» Padded lid exterior features straps (not
shown) to secure your laptop when work calls
» Heavy-duty, black Rotomolded, & uv-stabilized LLDPE (linear low-density polyethylene)
construction
» Two cup holders
» Overall Dimensions: 21”l x 10”w x 8”h
(53,3 l x 25,4 w x 20,3 h cm)
42
(2 boxes shown)
UTV UNIVERSAL FRONT RACK BOX
KOL4439
UTV
Are you always looking for a place to stuff your stuff? This
front box provides an additional 1.5 cu ft of weather resistant
storage space on your UTV. Perfect for storing jackets, blankets, tow straps, etc. Single wall body allows for maximum
storage with double-wall lid for added strength and protection.
Two draw-tight latches keep the lid secure.
Dimensions: 48.375” l x 19.625” w x 8” h
(122,9 l x 49,9 w x 20,3 h cm)
UTV UNIVERSAL ROOF
UTV/ATV BASKET
KOL53200
Our most versatile basket! An easy way to add extra storage capacity
to your ATV, UTV, compact tractor or anything with a roll bar! Constructed of heavy-duty powder-coated steel, this unique design holds
up to 35 lbs (15,9kg) and provides convenient access and transport
for small items such as hats, gloves, tools and more!
» Assembled dimensions 36” l x 7” w x 7” h
(91,4 l x 17,8 w x 17,8 h cm)
KOL4450
The custom designs of our Kolpin roofs blend perfectly with
your vehicle’s existing body style and once installed, look just
like they came directly from the factory. Heavy duty, foamfilled construction will withstand the toughest conditions and
handle the roughest of terrain.
Installation is easy utilizing your vehicles existing mounting
points and included stainless steel hardware. Each roof design provides excellent sun shade and rain cover.
» Overlapping, 3-piece design offers stability and easy
mounting to fit the most popular brands of utility vehicles.
» Easy installation.
43
UTV HEATED BUCKET SEAT COVER
KOL91860
UTV
For you hearty, cold weather riders, or those of you who just enjoy
a warm seat, Kolpin offers a heated version of our new UTV Bucket
Seat Cover designed with an automotive style heating element with
overheat protection. The standard 12v outlet plug includes an on/off
switch and extra power point adapter that connects directly to the
battery.
Though heated, this version of our UTV Seat Cover provides the
same comfort and style while on the trails. Our seat cover’s ergonomic design provides maximum comfort and cushioning thanks to our
exclusive Gel-Tech foam padding. The adjustable form fit design of
the seat covers accommodate the Rhino, Prowler and Teryx models
and even fit some compact/garden tractors. They also feature drain
holes to prevent water from pooling on the seat in wet conditions and
convenient on/off clips with adjustable mounting straps for that ideal
fit.
Includes two bucket seat covers.
UTV REAR / SIDE MIRROR
KOL98300
»
»
»
»
»
»
»
44
Rear and/or side mounting options
Easy to adjust with the quick-pivot design
Clamp design allows overhead mounting in your UTV with a roof installed
The wide angle, convex lens provides high visibility
Over-molded grips help to reduce vibration
Accommodates 1 1/2” - 2” (3,8 - 5,1cm) tubing
Dimensions: 10” x 3” (25,4 x 7,6 cm)
UTV SPEAKER CUBE
KOL3510
Pair
S T EREO S
Each speaker has:
»
»
»
»
One Jensen 6.0”/100 Watt Marine Grade Speaker
Mounting Brackets & Hardware
10.0’ (30 meter) Long Pre-Wired Lead
Clamp fits 1 3/4” x 1 7/8” diameter tubing
(4,5 x 4,8 cm)
» Sold as a pair
» Dimensions: 9” l x 11.5” w x 7” h
(22,9 l x 29,2 w x 17,8 h cm)
UNIVERSAL UTV STEREO
WITH DUAL SPEAKER
KOL3500
» Universal UTV mount stereo console with dual speaker
tower
» Weather resistant & durable design
» Fits tubing 1 3/4” (4,5cm) x 1 7/8” (4,8cm) diameter
Stereo Features:
» Jensen JMS2212 Marine Grade Waterproof AM/FM/USB/
iPod/iPhone ready
» 200 Watts (50w x 4)
» Compact “black box” design
» USB input supports MP3 & WMA digital music formats
» Full iPod/iPhone control
» NOAA Weather band
» Sirius Satellite ready (separate software is required)
» Zero memory current draw
» Low Battery Warning
» Wired Remote capable (JWR200)
» Positive, multiple line LCD display
for better viewing in all conditions
» Dimensions 5 1/8” x 3 3/4”
(13 cm x 9,5cm)
Speaker Features:
» Two Jensen 6.0”/100 Watt Marine Grade Speakers
» Mounting Brackets & Hardware
» 10.0’ (9 meter) Long Pre-Wired Lead
**Extra speakers sold separately
ATV FRONT STEREO BOX
KOL4435
»
»
»
»
Heavy duty, Rotomolded, construction
1.5 cu ft (0,04m³) of weather-resistant storage
Clear polycarbonate windscreen for protection
Two braided stainless-steel lanyards that hold the dry storage compartment open for easy access
» Mounts to most tubular or composite racks
using four U-bolts & sealing washers
» Can be utilized with our Kwik-Cinch System (KOL98400)
Face Plate Features:
»
»
»
»
»
»
Jensen MSR 2010 weatherproof, wired remote with display
Single line dot matrix display with blue backlight
Selectable US/Euro frequency tuner
Sirius Ready (requires additional software)
UV resistant front panel
Corrosion resistant
All stereos/speakers made in
the USA
45
ACCES S O RI E S
ALL TERRAIN GLOVES
KOL96500
KOL96501
KOL96502
Medium
Large
X-Large
» Versatile form-fitting glove designed
for work or recreation
» Padded, double stitch palm pads
» Airprene knuckle for riding comfort
» Secure wrist closure
» US Patent #D514,771 - under license
registered trademark of Ironclad® performance wear
ATV BIKINI
KOL91890
» Protect your feet and legs
from mud and water
» One size fits all style utility
ATVs
» Made of durable neoprene
fabric
» Easy to clean
» Easy installation
» Sold as a pair
CROSSOVER SPORT GLASSES
KOL96010
KOL96020
Gray Lens
46
I/O Lens
I/O Lens
Gray Lens
» Polycarbonate lenses exceed ANSI Z87.1
standards & provide impact resistance from trail debris
» Fitted foam helps to keep out dust & debris
» Superior peripheral vision vs traditional goggles
» Removable/Adjustable goggle strap
» Gray, anti-Fog treated lenses designed for bright outdoor conditions
» Indoor/Outdoor, anti-Fog treated lenses designed
for moving between indoor & outdoor lighting
» Ideal for: ATV/UTV, Shooting/Hunting, General Safety, Outdoors
ACCES S O RI E S
TIRE REPAIR KIT
KOL89510
» Everything you need to repair & inflate
multiple ATV tires
» Packed conveniently in our handy storage pouch
Includes:
» (3) CO2 cartridges (1 to 2 cartridges will
fill most ATV tires)
» Regulator/adapter tool
» (5) 4” tire seals
» Tire roughing tool plus installation tool
FLAT PACK
CARGO SPYDER
KOL89500
Patent Pending
KOL95175
Secure your gear with this completely adjustable shock cord
storage system. The adjustable design easily accommodates
various cargo sizes & shapes, providing a secure fit.
» Ideal for ATV, scooter, motorcycle & other vehicle use
» Shock cord diameter .28 in (7 mm)
» Shock cord length 27.6 in (70 cm)
» By diagonal shock cord length 49.2 in (125 cm)
» Includes all of the tools a rider will need
to fix up to 10 flats
» Tools are secured inside a handy, easyto-use pump
» Easily straps to ATV racks or stores
inside gear box
TRAILTEC RACK PAD
KOL91880
KOL91885
Black
Realtree ® AP™
» 600 x 600D poly/pvc fabric
» (7) Velcro straps for easy attachment
to ATV racks or composite racks
» 3” (7,6cm) open cell foam for riding
comfort
» 1/2” (1,3cm) closed cell foam on base for
shock absorption
» Great pad for dogs, sporting events,
fishing boats, etc.
» Reduces shock & discomfort from
ATV racks
» Easily folds in half for shipping/storage
or to double the cushioning effect
» Available in Black or Realtree ® AP™
(91,4 l x 38,1 w x 7,6 h cm)
HAND GUARD WITH MIRROR
Black
KOL97300
» Constructed of durable molded polyurethane with Kolpin’s
trademark Rhino Rib ® reinforcement for added protection
» Features round, 3” (76.2mm) fish-eye rearview mirror
» Universal fit design mounts directly to most ATV handlebars
» Does NOT fit Can-Am ATV’s with hand guards or Kawasaki
Brute Force Models with plastic handlebar fascia
» Includes (2) hand guards with mirror & hardware
47
HEATED GRIP
ATV TYRE CHAIN DIAMOND
ACCES S O RI E S
KOL96155
» Protect your hands from the cold
» 4 level temperature settings
» Fits any 7/8” (2,2cm) standard
handlebars on ATV or snowmobiles
» Easy to install with pre-wired electrical connectors
» Handlebar or tank mounted electronic control unit with LED display
» To assist in installation use contact
cleaner or a type of lubrication
» Keep your hands warm during those cold
winter activities - plowing, hunting, etc.
» Handlebar mounted dial switch
» Comfortable rubber grips
» Plug & Play connectors
KOL96867
Fits tyre sizes:
Fits tyre sizes:
22x11-8
22x10-8
20x10-9
22x10-9
22x10-10
22x11-9
22x11-10
23.5x8-11
24x8-11
HEATED GRIP
KOL50-0360
KOL96865
REPLACEMENT SWITCH
KOL96155
KOL96868
Fits tyre sizes:
KOL96866
27x9-12
27x11-12
27x10-12
Fits tyre sizes:
KOL96869
23x10-10
24x9-11
24x10-11
24x11-10
23x10-12
25x8-12
KOL96156
25x12-9
25x11-10
25x12-10
25x10-12
Fits tyre sizes:
27x12-12
28x10-12
28x12-12
30x10-12
LOW PRESSURE TYRE GAUGE
KOL96810
ATV MIRROR
KOL97200
48
» Easily mount to handle bars or front
tubular racks
(hardware included)
» Fully adjustable 4” (10,2cm) mirror
» Kwik clip allows for easy positioning
& removal
» Safely view who is behind you
» Accommodates 5/8” (1,6cm) to 1”
(2,5cm) diameter tubing
» Can be mounted on the left or right
hand side of the rack
THROTTLE MASTER
» Keeps ATV tyres at optimum pressure
» Rubber shock absorbing boot to prevent
damage in the field
» White dial face with black numerals
» 360° swivel-angle chuck
» 0-30 PSI range
KOL98005 Standard
KOL98010 Heated
»
»
»
»
Eliminate fatigued or sore thumbs
More precise throttle control
Easy universal bolt on design
Unique design allows blade length to
be adjusted
» Blade angle can be bent for individual
preference
» Available in standard or heated version
» Heated version features off, hi-low
temperature settings
RECOVERY STRAP BLACK
KOL96850
» 15 ft (4,6 meter) in length
» Black rugger nylon strap with yellow Kolpin
logo
» Forged steel hooks with safety clips
» 10.000 lb. (4500 kg) tensile strength
KOL91855
KOL91865
Black
» Fits most ATV’s
» Gel padding & ergonomic design provides
maximum cushioning & temperature control
for exceptional riding comfort
» Easy to install with Velcro straps
» Dimensions: 14” (35,6cm) front, 21” (53,3cm)
back, 30” (76,2 cm) length
SEAT COVER
KOL93645
KOL93640
Black
» Designed to fit small & mid-size ATV’s up
to 400cc
» Rugged 600D nylon for long wear & protection of your ATV seat
» Available in Black or Mossy Oak® Breakup ™
» Dimensions: 13” (33,0cm) front, 15 1/2”
(39,4cm) back, 26” (66,0cm) length
» Does NOT work on Sportsman 500
ACCES S O RI E S
GEL-TECH™ SEAT COVER
ATV COVER
KOL95110
KOL95104
Standard
XXL
»
»
»
»
»
Made of dura-poly nylon to withstand all weather elements
Reinforced tie-down grommets
Available in Black only
Standard size fits most ATV’s 400cc & smaller
Standard Dimensions: 85” l x 35” w x 32” h
(216 l x 89 w x 81 h cm)
» XXL Dimensions: 95” l x 50” w x 50” h
(241 l x 127 w x 127 h cm)
*** Special note: cover must be removed for trailering
UTV CAB HEATER SYSTEM
KOL98600
Black
GEARTECTOR® MITTS
KOL92180
KOL92185
Black
» Extra large, reinforced opening for easy access to
handlebars
» Plush lining to keep your hands warm
» Simple locking draw cord to securely seal to handlebars
» Durable Rhino plate front panel for abrasion resistance
» Roomy interior allows complete access to all controls
» Big heat in a Small Size
» Utilizes engine coolant as heat source, includes a coolant diverter valve for
summer use
» Low fan amp draw means long hours of comfort without draining your battery
» Integrated, variable speed switch allows the operator to set the comfort level
» One installation kit fits most UTV’s
» Mounting bracket rotates 180° from top to bottom for easy mounting to floor,
firewall, or under dash
» 4000BTU/hour
Specifications:
» CFM : 0 to 200
» Amp Draw : 0 to 2
» Size: 5.5” x 5.5” x 9.5”
(14 x 14 x 24cm)
» Weight: 3.5 lbs (1,6kg)
49
ACCES S O RI E S
FIRE EXTINGUISHER BRACKET
KOL26600
» Nylon web adjustable straps with hook and
loop fastening for securing easily on your UTV
» Fits all 1.25 - 2” (3,2 - 5,1cm) roll bars
» Heavy-duty bracket
» Holds most household or shop fire
extinguishers
» Fire extinguisher not included
» Fire extinguisher is required to be carried on
UTV’s in some states
ATV ICE AUGER HOLDER
KOL26100
» Securely holds standard size Ice Augers
in v-shaped lockers and straps
» Auger Holder attaches to tubular ATV
rack, either perpendicular to vehicle or
parallel to vehicle for narrow portages or
pathways
» Easily attaches to front or rear ATV
racks with thumbscrews and U-bolts
» No tools required to remove from ATV
LOCK-IT RITE ATV SYSTEM
KOLLGD-30-U
The Lock-it Rite ATV System is a security and safety
device uniquely designed to fit any pick-up truck with a 2”
receiver. Prevent forward, backward, and side movement
and protect against the ATV entering the cab in event of
an accident. Built in, 2” Class 1 hitch receiver - ideal for
pulling a small trailer.
»
»
»
»
»
Faster and stronger than tie-down straps
Universal fit to any pick-up truck with 2” receiver
Easy installation / removal
Heavy-duty steel construction
Ideal for ATV’s and smaller UTV’s that can fit in a
truck bed
» Incorporated accessory trailer hitch - rated 2,000
lb. (900kg) towing weight and 250lb (113kg) tongue
weight
50
LOCK-IT RITE TRAILER SYSTEM
KOLLGD-TRL-16
»
»
»
»
Secure an ATV or UTV to your trailer for safe transport
Faster and stronger than straps alone
Prevents forward, backward, and side movement
When not in use, simply remove the upright arm, leaving only
the base plate attached to the floor of your trailer
» Takes up minimal floor space
» Comes with bolts for wood or steel trailer beds
KOLPIN POWERPOD
ACCES S O RI E S
KOL94510
Simplify – Electrify – Connect!
Simplify multiple electrical connections to a single point of power - Electrify with intelligent power distribution - Connect multiple electrical
accessories to your ATV or UTV instantly, without wiring.
The Kolpin PowerPod makes aftermarket accessory customization/installation easier than ever by providing plug & play electrical ports
to enable the use of multiple electrical accessories on your ATV or UTV, such as a winch, extra lights, Dirtworks, spreader, cell phone
charger, etc…. No longer do you need to waste time wiring each accessory and mounting multiple switches – now you can install the
PowerPod harness just once to your battery and then just ‘plug & play’ with multiple electrical accessories to the external ports –
it really is that easy! The PowerPod allows you to select the front or rear accessories and control all on/off from one central location
eliminating the need for additional controls or switches. There is no other power accessory available for both ATV’s and UTV’s that
allows this level of versatility and control.
94510
» Intelligent Power Distribution - Centrally control up to five 12v circuits, two are toggle switch controlled for up/down and
provide up to 50 Amps of support for high power accessories such as Dirtworks implements, winches or spreaders
» Standard version includes 2 additional external 12v circuits
» Pro version includes 3 additional external 12 v circuits
» Unique interface remote allows control of all your electrical accessories from a central control pod and can be easily mounted to handlebars,
tank or dash locations
» Power buttons control installed electrical accessories (such as winch, extra lights, Dirtworks, spreader, cell phone charger, or other 12v accessories)
» Universal fit for ATV or UTV use
» Protected from the elements with an all weather design
TILT-N-TOTE GAME LOADER
TNT-DR-LDR
You can mount the Tilt-N-Tote Game Loader on the front or rear of your ATV and tilt
to near vertical to easily load deer or other game. A pin in the center of the device
allows you to rotate the unit to a vertical position and an extension pulls out to double
its length/height for hoisting. Once in the locked vertical position, you can extend the
strap out to your game and hoist it vertically to 6 to 8 feet (1,8 - 2,4 meter) off the
ground using the incorporated 1200-pound winch. From this point you can chose to
rotate the unit back to its original horizontal position to either transport the game or
field dress it. When you are ready to return from your hunt, rotate the loader back to
the horizontal position, push the extension back into the unit, and use the strap and
winch to hold your game in place for transport. The angled brackets of the cradle will
ensure that your game remains secure even over rough terrain.
»
»
»
»
»
»
»
»
Hoist game with winch and winch strap; has telescoping arm for height
Line up game with cradle, tilt to horizontal position for field dressing or transport
Loading capacity - 250 lbs (113kg)
Product weight - 53 lbs (24kg)
Mounts to front or rear of ATV
Winch is included
Heavy duty steel construction
Transfer from your ATV to any truck or SUV with 2” Receiver Hitch
Adapter (sold separately)
TILT-N-TOTE 2” RECEIVER HITCH
ADAPTOR
TNT-DR-TRK
The 2” Receiver Hitch Adapter allows you to transition the
Tilt-n-Tote Game Loader from your ATV to the 2” hitch receiver of your truck or SUV. It saves time and effort loading the game into your vehicle and eliminates any messy
cleanup from the bed of your truck.
» Converts the Tilt-n-Tote Game loader to fit UTV’s,
trucks, or anything with a standard 2” receiver
» Includes the patented Slack-N-Ator to eliminate hitch
rattle and slack
» Product weight - 15 lbs (6,8kg)
» Heavy duty steel construction
51
X-FACTOR™ “PLOW IN A BOX”
KOL10-0520
P LO WS
The Kolpin ® X-Factor™ Plow System comes with everything you need to
start plowing with your ATV today! Easy to assemble & install on your
ATV, this durable ATV plow will have you pushing Mother Nature around.
» REQUIRES winch, Manual or Electric Lift system (NOT INCLUDED)
» Industry first complete bolt together plow system in a box!
» Heavy duty, 3-piece steel & tube steel frame that will withstand years
of plowing use
» Easy on / easy off push tube
» X-Factor™ Plow System comes complete with everything you need to
start plowing today
» Forward ATV Plow Mount fits most ATV frames from 2002current models
» Rugged 52” 14 gauge steel blade with double layer of steel at center X
» Strong square tubed push frame
» 5 position blade angle
» Dual trip springs & height adjustable HD skid shoes protect plow &
ATV
» Double sided steel wear bar that can be turned over to double the life
» Easy to assemble
» One year limited warranty
BIG BOX PLOW SYSTEM 52”
KOL10-0550
» REQUIRES winch, Manual or Electric Lift system (NOT INCLUDED)
» ATV Drifter Plow System comes complete with blade, heavy-duty
push tube and mount
» Design features Patented Forward Plow Mount (US Patent 8,505,973)
and fits most ATV frames from 2002-current
» Rugged 52” Poly Blade with Patented RibCore construction (US Patent 7,685,748 B1)
» Easy on / easy off push tube attachement
» Strong square push tube
» 5 position blade angle adjustment
» Dual trip springs and height adjustable HD skid shoes
» Double sided steel wear bar that can be turned over to double the life
» Easy to assemble
» One year limited warranty
» NOT recommeneded for Can-Am models. See application chart for
model specific fitments
52
P LO W ACCES S O RI E S
POWER MAX LED BLADE LIGHT
KOL50-0550
»
»
»
»
»
»
»
»
36 ultra bright LEDs provide more light on the plowing surface
LED light strip enclosed in weather proof enclosure
10’ (3 meter) cord with 12V adapter supplies power from in-dash receptacle
Low amp draw allows extended use with minimal battery draw
Adjustable for best light direction & swivels 180 degrees to face vehicle
Removable for use as trouble light when needed
Mounts to steel blades, poly blades, or on ATV racks
Also fits most other brands of ATV/Side by Side blades
MANUAL QUICK LIFT
BLADE FLAP
KOL10-0190
» Universal Rubber Blade Flap
fits plow blades with widths
42” - 72”
» Keeps snow from flying into
your face
» Available in any size from 42”
to 72”
KOL15-0030
» Manually Raise & Lower any ATV
Plow System easily from the Driver’s
Seat
» Attaches to front rack with the included EZ Mount system
» Ratcheting handle allows user to lock
blade in any of four positions
» Operates with minimal lifting effort
» Works with most ATV plow systems
PLOW MARKER KIT
KOL10-0140
KOL10-0145
Pair (Steel)
Pair (Poly)
» Increases visibility of plow edges
for added safety
» Easily bolts to sides of plow blades
» Steel markers have 45° bend base
» Poly markers have 90° bend base
WEAR BAR X-FACTOR
KOL105320
SKID SHOE X-FACTOR
KOL105319
» 3 pieces needed
53
DI RT WO RKS
Your complete source of ATV & UTV Implements - EASY AS 1 - 2 - 3 !!!
Dirtworks® by Kolpin®
Kolpin® provides the largest assortment
of the quality tools you need to put your
ATV or UTV to work! Whether you’re
establishing a wildlife food plot or just
maintaining your property, Kolpin® has
the right accessory for the job.
Our complete line of rugged, heavy duty
Category “0” agricultural implements
includes disc plow, cultivator, landscape
rake, chisel plow, rear blades/scrapers &
a growing line of hitches.
Simply the TOUGHEST implements
available for ATV’s & UTV’s
on the market today!
1
Step 1 54
Choose your 2” Receiver Hitch &
Suspension lockout (pg. 60-63)
3
2
Add the 3-point hitch &
tool bar (pg. 55)
Step 2 -
Choose your Implement(s)
(pg. 56-59)
Step 3 -
HD 3-POINT HITCH SYSTEM
DI RT WO RKS
KOLWHS03HD
» Category “0” 3-point hitch with a 20” (51cm) tool bar width & 5/8” (1,6cm)
diameter pins
» Heavy-duty 1 1/2” (3,8cm) square tubing mainframe for use on ATV’s or UTV’s
» Fits any 2” automotive style receiver hitch or if you don’t have one … check out
our complete line of heavy duty hitches
» Easy change over from work to play in just minutes with quick, easy installation
& adjustments without the need for tools.
» Convenient rocker switch can be mounted to your handle bars
» 12v electric actuator lift system with 20 amp maximum current draw
» 250 lb. (113kg) lift capacity at the tool bar with 300 lbs (136kg) down pressure
capacity
» 15” (38cm) vertical lift at the tool bar
» Fully adjustable lift arms & top link
» Additional frame support kit may be required, please check out our suspension
locks & frame support kits
» Requires Accessory Tool Bar (sold separately)
ACTUATOR FOR HD 3-POINT HITCH SYSTEM
KOL11038
ACCESSORY TOOL BAR
4” LIGHT DUTY DRAG HARROW
KOL86840
» Attaches quickly to your ATV, UTV or garden
tractor to help loosen compacted dirt
» Ideal for leveling dirt/gravel, seeding food
plots, prepping for sod, or even dragging ball
fields.
» Made from heavy-duty, powder coated steel
framing & galvanized mesh
» Light weight for easy
handling & storage
» 4’ w X 5‘ l = 20 sq ft
(122cm w x 152cm l = 1,85m²)
KOLATB48
KOLATB60
48” WIDTH
60” WIDTH
» 48” Tool Bar for use with ATV’s or UTV’s
» 60” Tool Bar for use with UTV’s
» Category “0”, 5/8” (1,6cm) hitch pins with 20” (51cm)
spacing
» Heavy-duty, black powder coated tool bar
» Allows a quick change from one implement to another
» Each of our Dirtworks ® implements are designed to
slide into, or plug into the tool bar for use with the
3-Point Hitch
» Required to use with any DirtWorks ® Implements
55
DI RT WO RKS
LANDSCAPE RAKE
KOLLSR60
»
»
»
»
»
DISC PLOW
KOLDP8
» Our best selling implement is also the most versatile - It cuts.. It digs.. It slices.. It dices..
» Two individual gangs of (4) discs are easy to attach to the DirtWorks ® & the accessory tool bar
» Five adjustable cutting angles to accommodate
different soil types & conditions
» Live axle & sealed ball bearing design
» 54” (137cm) width
» Requires either the 48” or 60” Accessory Tool
Bar & 3-Point Hitch System (sold separately)
» 2 Boxes (DP8 & DP82)
56
Clear trails, groom horse corrals, rake the beach or maintain your gravel driveway
Five position angling provides more customized results
21 – 1 5/16” (3,3cm) hardened landscape rake tines
Requires either the 48” or 60” Accessory Tool Bar & 3-Point Hitch System (sold separately)
60” width
CHISEL PLOW/SCARIFIER
DI RT WO RKS
KOL86100
» 2 applications in one – use as a Blade Scarifier OR as a Chisel Plow!
» As a scarifier it is ideal for loosening material for more use
» As a chisel plow, clear away roots, sod & debris for preparation of food plots & other land
maintenance tasks.
» Hardened steel teeth loosen hard packed surfaces such as driveways, sand trails, or can be
used to cut into hard, solid sod.
» Adjustable blade height for specific ground type & extra clearance during transportation
» (6) ½” (1,3cm) heavy-duty, hardened steel plow teeth
» Requires either the 48” or 60” Accessory Tool Bar & 3-Point Hitch System (sold separately)
» ** Helpful Hint: We recommend the use of an additional tool bar for speedy changeover of
the Chisel Plow/Scarifier when utilizing other DirtWorks ® implements
CULTIVATOR SET
KOLCT036
» Great implement for the initial preparation of hard
packed soil
» Cultivator tines break up compacted ground providing deeper penetration & more aeration when preparing your seed bed.
» Agricultural grade Danish “S” tines feature reversible
sweeps
» Includes six each of the “S” tines with 1 1/2” (3,8cm)
sweeps
» Requires either the 48” or 60” Accessory Tool Bar &
3-Point Hitch System (sold separately)
Can also be
used with the
Rear Blade
attachment
» ** Helpful Hint: We recommend the use of a separate
tool bar for mounting convenience of the cultivator
set if you are utilizing other DirtWorks ® implements
57
DI RT WO RKS
REAR BLADE
KOLFRB48
KOLFRB60
»
»
»
»
»
»
»
»
48” Rear Blade (Model Shown)
60” Rear Blade
Easy one pin mounting
Available in 48” & 60” width
Five position angling
13” (33cm) blade height with a replaceable & reversible wear
bar for long life
Requires either the 48” or 60” Accessory Tool Bar (sold separately)
Incorporated flange plates allow our popular Box Scraper attachment (sold separately) to be bolted on to quickly convert
the blade to a box scraper
48” blade with box scraper requires 48” Accessory Tool Bar
60” blade with box scraper requires 60” Accessory Tool Bar
3-POINT TRAILER
KOLWHS03TA
KOLWHS03TABH
(Excluding BALL HITCH)
This innovative trailer design provides an alternative for the
DirtWorks 3-Point Hitch System when using with machines
350cc or less. The trailer accessory is also perfect for
vehicles that do not have a heavy duty receiver hitch available. The 3-Point Trailer does not include the 3-Point Hitch
System.
KOLWHS03TABH
» 18” pneumatic tires
» Secures with a clevis pin mount
» Requires 3-Point Hitch System and
Accessory Tool Bar (Sold Separately)
» 2 Boxes (KOLWHS03TA and
KOLWHS03TA2)
BALL HITCH
KOLWHS03TABH
58
ROCK BLOCKER
KOL85300
» Fits Compact, Mid-Size Full Size Vehicles and Dually Pickup Trucks
» Adjustable height and width for perfect fit-up.
Width adjusts 66” to 94”
» Secures to a 2” (5,1cm) ball mount
» Protect your ATV, Snowmobiles, Motorcycles,
Vehicles and other towables
» Flaps are 24” x 24” x 3/8” (61 x 61 x 1cm)
thick rubber
» Easy Installation
TOW-BEHIND DISC PLOW
KOL86850
DI RT WO RKS
The Kolpin DirtWorks Tow-Behind Disc is an economical choice for use with ATV’s, utility vehicles, or small garden
tractors. This heavy duty, quality built disc is ideal for wildlife food plot preparation and other land maintenance tasks.
Gone are the days of having to wrestle with your disc to unhook it, flip it over, and then try to turn it around to hook
it back up to your ATV. Quickly and easily switch from transport to disc mode with the
innovative pivot design of Kolpin’s Tow-Behind Disc. Just a simple pull of the pin and the
eight agricultural grade discs pivot to engage the ground. No other tow-behind disc
switches from transport to disc mode as easily as the Kolpin Tow-Behind disc!
The 14” (355,6mm) notched disc blades are constructed of agricultural grade,
hardened steel that provides substantial ground penetration and a 54”
(1371,6mm) cutting width.
DROP SEEDER/CULTIPACTOR
KOL86800
Another innovation from Kolpin... the Drop Seeder/
Cultipactor for use with our DirtWorks 3-Point Hitch
System. This highly engineered implement is a drop
seeder and cultipactor in one! Save time food plotting or seeding with this one pass process. Attaches
easily to DirtWorks Accessory Tool Bars for use
behind your ATV, UTV or existing 3-Point Hitch
System.
» Drop seeder features an adjustable dial gauge
that accommodates multiple seed sizes
» Provides consistent seed distribution for
uniformed results compared to a broadcast
spreader
» Driver accessible seed flow gate eliminates the
need to start and stop to open/close the seed
gate when using behind an ATV
» Cultipactor helps to create an optimal, even
seed bed and with great seed to soil contact
» Innovative shocks allow cultipactor to follow the
terrain and keep consistent pressure on cultipactor wheels for true ground compression to
improve germination
» Industry studies have shown that notched cultipactor wheels create the most ideal soil indentation allowing for moisture to collect for optimal
seed germination
» 48” (122cm) width
» Requires Accessory Tool Bar (Sold Separately)
» Economical wildlife food plot or land management disc for ATV’s, utility
vehicles and small garden tractors
» Quickly and easily switch from transport to disc mode with
innovative pivot design
» Clevis mount for attachment
» Two individual gangs of (4) 14” (355,6mm) agricultural grade,
notched discs
» 5 adjustable cutting angles
» Heavy-duty weight trays with tie-down
anchorscompression to improve germination
» Industry studies have shown that notched cultipactor wheels create the most ideal soil indentation allowing for moisture to collect for optimal seed germination
» 48” (122cm) width
» Requires Accessory Tool Bar (Sold Separately)
60” SWEEPER BROOM WITH BRACKET
KOLSPR60BROOM
» Attaches to either the 48” or 60” tool bar of the Kolpin Dirtworks Three-Point System
» Industrial quality broom 60” (152cm) wide with 3 angle positionsing
» Perfect for farm use, grooming baseball diamonds and general
clean-up
» REQUIRED: Must be used with the Kolpin Dirtwork 3-Point
Hitch System and Tool Bar (not included)
60” SWEEPER BROOM BRACKET
KOLSPR60BKT
59
HI T C H/ F R A M E SUPPO R T
UTV FRAME
SUPPORT KITS
» 2” IRS Receiver Hitches are frame mounted
» Long lasting powder coat finish for ground engaging
& heavy towing capabilities
» Kolpin ® hitches are the heaviest duty hitches on the
market!
» For off-road use only
ATV 2” IRS
RECEIVER
» *** Please review our fit list online for model specifics
Part Nr.
Name
KOL85100
Universal
KOL85110
Can Am Outlander
Can Am ATV Models with trailing arm suspension
KOL85145
Honda Rancher AT
Honda Rancher AT Independent Suspension Models
KOL85170
Polaris X2/Touring
KOL85185
» Provides added frame stability & support
» Transfers the torque load from the hitch to the frame
» Highly recommended for use with the Kolpin ® DirtWorks ® 3-Point Hitch System
Part Nr.
Name
Fits Model
KOL90500
Universal
Yamaha Rhino & Others*
Fits most ATV models with Independent Rear Suspension
Polaris X2 and Touring models
2011 - current Polaris Sportsman New Chassis
400/500/HO/800
Polaris Sportsman
KOL85190
Polaris Sportsman XP
2009 ONLY Polaris Sportsman XP Models
KOL85195
Polaris Sportsman XP
2010-2011 Polaris Sportsman XP Models
KOL85100
KOL85110
KOL85185
60
Fits Model
KOL85145
KOL85190
KOL85170
KOL85195
KOL85150
KOL85155
ATV 2” SWINGARM
RECEIVER HITCH
Part Nr.
KOL85140
» Heavy duty Class 1 frame mounted 2” receiver
hitch
» Long lasting powder coat finish for ground
engaging & heavy towing capabilities
» Kolpin ® hitches are the heaviest duty hitches
on the market!
» 200 lb. ((90kg) max tongue weight
» *** Please review our fit list online for model
specifics
KOL85160
Name
KOL85140
KOL85180
Fits Model
Honda Foreman
Fits Honda Foreman 2012-current new
chassis with single rear shock
Fits most Honda Foreman Models
(Twin Shocks)*
KOL85150
Honda Foreman
KOL85155
Honda
Fits most Honda Rancher Models (Single
Shock)* also fits 2012 Rubicon Foreman
(Single Shock)*
KOL85160
Kawasaki
(Prairie/Bayou)
Fits most Kawasaki non-independent rear
suspension ATV Models 2002 & newer*
KOL85180
Suzuki (Eiger/Vinson)
Fits most Suzuki ATV Models with
straight axle*
UTV 2” RECEIVER HITCH
Part Nr.
Name
Fits Model
KOL90250
Kawasaki Mule
(Rear)
KOL90260
Ranger RZR (Rear)
KOL90100
Universal (Rear)
Universal model
KOL90150
John Deere HPX
(Rear)
All John Deere HPX models
KOL90200
Kubota RTV
Kawasaki Mule (Rear) - Fits models
3010/4010 ONLY - does not fit Mule
610
KOL90250
KOL90260
All Ranger RZR models
Kubota RTV
KOL90100
KOL90150
61
MULTI HITCH
3-WAY MULTI HITCH
(KOL85610, KOL85620)
» Unique design enables dual towing capability with the
ball mount or pin mount
» Side loops for tie down, tow straps or safety chain
attachment
» Durable powder coat finish for long life
» 3/4” (1,9cm) hitch ball mounting hole, 5/8” (1,6cm)
clevis hitch hole
BOLT ON 3-WAY HITCH
KOL85610
KOL85620
KOL85630
KOL85640
(KOL85630)
» Three easy mounting options; ball (sold separately),
clevis & tow hook mount
» Not recommended for use with the Kolpin ® Dirtworks ® 3-Point
Hitch System
» 3/4” (1,9cm) hitch ball mounting hole, 5/8” (1,6cm) clevis hitch hole
» 3” (7,6cm) rise
BOLT ON ATV RECEIVER
(KOL85640)
» Unique design enables dual towing capability with the ball mount
or pin mount
» Heavy-duty 2” receiver mount for additional ball mount inserts
» Reversible for trailer hitch height adjustment
» 3/4” (1,9cm) hitch ball mounting hole, 5/8” (1,6cm) clevis hitch hole
Part Nr.
Name
KOL85610
3-Way 1 1/4” Multi
Hitch
Heavy-duty drawbar fits 1 1/4” factory
receiver hitches
KOL85620
3-Way 2” Multi
Hitch
Heavy-duty drawbar fits 2” factory receiver hitches
KOL85630
KOL85640
Fits Model
Bolt on 3 Way Hitch
For 3/4” shaft trailer ball (sold separately)
(Light Duty)
Bolt on ATV Receiver Hitch (Light
Duty)
Fits most ATV’s with factory hitch
For 3/4” shaft trailer ball (sold separately)
SUSPENSION
LOCKOUT
» Eliminate rear suspension sag when under load
» Highly recommended for use with the Kolpin ® DirtWorks ®
3-Point Hitch System or for any heavy load
» Can be used for pulling a boat, trailer, ice house or even
during ATV pulls
» Fits most ATV’s with Independent Rear Suspension
KOL85200
62
Part Nr.
Name
KOL85200
Universal IRS
KOL85210
Can Am
KOLSLUSA
Universal Swingarm
Fits Model
Fits most ATV models with
Independent Rear Suspension*
Can Am Outlander & Renegade ATV
Models* with trailing arm suspension
ATV Models with solid axle rear
suspension*
KOL85210
Right side shown only
KOLSLUSA
KOL85500
» John Deere X500
» Heavy Duty 2” receiver hitch for your garden tractor
GARDEN TRACTOR 2”
RECEIVER HITCH
LIGHT-DUTY HITCH
KOL97120
Our Kolpin Quad Receiver Hitch provides three mounting options; ball, clevis
and tow hook mount. This hitch mounts to your receiver hitch tube and is perfect for light weight trailer and towing applications. Not recommended for use
with the Kolpin DirtWorks 3-Point Hitch System.
» Quickly and easily mounts to most ATV’s equipped with a factory hitch,
please review our fit list for model specifics
KOL85550
» TCub Cadet
» Heavy duty 2” receiver hitch for your garden tractor
TOW BAR BALL
KOL96097
» 50mm outside diameter
SWITCH-HITCH TRAILER ADAPTER
KOL50-0990
» Adapts clevis pin trailer hitch to
work with a ball!
» No more lost clevis pins
» Makes backing-up easier
» Eliminates up-and-down chatter….
» Effective on ATV’s, UTV’s & lawn
tractors
63
»
»
»
»
»
WI N CH E S
WINCHES
2500 LB WINCH
3500 LB WINCH
4500 LB WINCH
KOL85025
KOL85026
KOL85035
KOL85045
»
»
»
»
»
»
»
»
»
»
»
»
64
Heavy duty, durable construction and fully sealed for maximum longevity
Designed for vehicle recovery and/or plow lifting
Automatic brake and sealed contactor for smooth, reliable performance
UTV/ATV model specific winch mounts required
Limited Lifetime Warranty
Steel Cable
Synthetic Cable
Rated Line Pull: 2500 lbs. (1134 kg)
Gear Ration: 136:1
Gear Train: 3 Stage Planetary Gear
Motor: 12V DC, 1.2Hp (0.9 kw)
Permanent magnet. (Sealed)
Drum Size: 2” X 2.9” (50.8 mm X 73.66 mm)
Mounting Bolt Pattern: 3.0” X 4.88”
(76.2 mm X 124 mm)
Clutch: Free-spooling, Cam Activated
Cable: 50 ft (15 m) X 3/16 (4,8mm)
Steel Cable or synthetic rope depending on model
Fairlead: Roller
Rated Line Pull: 2500 lbs (1134 kg)
Overall Dimensions: 13.3” X 4.5” X 4.7”
(33,8 x 11,4 x 11,9 cm)
Weight: 18.2 lbs. (8,3 kg)
»
»
»
»
»
»
»
»
»
»
»
»
Synthetic Cable
Rated Line Pull: 3500 lbs. (1588 kgs.)
Gear Ration: 166:1
Motor: 12V DC, 1.2Hp (0.9 kw)
Permanent magnet (Sealed)
Drum Size: 2” X 2.9” (50.8 mm X 73.66 mm)
(76.2 mm X 124 mm)
Cable: 50 ft (15.24 m) X 3/16 (4.762mm)
Synthetic Rope
Fairlead: Roller
(33,8 x 11,4 x 11,9 cm)
Weight: 19.1 lbs. (8,7 kg)
»
»
»
»
»
»
»
»
»
»
»
»
»
Steel Cable
Rated Line Pull: 4500 lbs. (2041 kg)
Gear Ration: 202:1
Motor: 12V DC, 1.5 hp (1.12 kw)
Permanent magnet (Sealed)
Drum Size: 2” X 4.7” (50.8 mm X 119.4 mm)
(76.2 mm X 169.2 mm)
Cable: 55 ft (16.764 m) X 7/32” (5.56m)
Steel cable
Fairlead: Roller
Control: Handheld remote with 11ft (3,4 m) lead
and sealed mini rocker
(36,8 x 12,2 x 11,4 cm)
Weight: 25 lbs (11,3 kg)
HAND HELD SWITCH
HOOK
» Suitable for:
KOL85025, KOL85026, KOL85035 and KOL85045
HOOK STRAP
KOL85061
WI N CH E S
KOL85067
KOL85060
» Suitable for:
SOLENOID
KOL85068
» Suitable for: KOL85045
» Suitable for:
ROLLER FAIRLEAD
STEEL CABLE
KOL85062
KOL85063
(For KOL85025)
(For KOL85045)
KOL85069
» Suitable for:
KOL85025, KOL85026 and KOL85035
SYNTHETIC ROPE COVER, SHRICK T
KOL85065
» Suitable for:
KOL85026 and KOL85035
MINI ROCKER SWITCH
KOL85066
» Suitable for:
65
WI N CH CH ART
66
WINCH
APPLICATION CHART
Part Nr.
Year
Model
KOL100430
1995 - 2008
Polaris G4 Mount
KOL100440
2005 - 2010
Polaris Sportsman
KOL100450
2005 - 2013
Suzuki King Quad 450/500/700/750
KOL100505
2000 - 2007
Honda Rancher 350/400
KOL100510
2002 - 2008
Yamah Grizzly 660
KOL100525
2002 - 2013
BRP Outlander G1 Mount
KOL100530
2003 - 2013
Yamaha Kodiak / Bruin / Grizzly
KOL100535
2005 - 2013
Kawasaki Brute Force 650/750
KOL100540
2003 - 2013
Honda Rincon TRX650/680
KOL100545
1995 - 2004
Honda Foreman
KOL100550
2003 - 2013
Yamaha Rhino 450/660/700
KOL100563K
2005 - 2009
Polaris Ranger STD
KOL100575
2005 - 2013
Kawasaki Mule 600/610
KOL100585
2007 - 2013
Honda Foreman / Rubicon TRX500
KOL100610
2007 - 2013
Yamaha Grizzly 550/700
KOL100630
1993 - 1997
Polaris G2 UTV
KOL100660
2008 - 2013
Polaris Ranger RZR 800/570
KOL100700
2008 - 2013
Kawasaki Teryx
KOL100705
2007 - 2013
Honda Rancher 420
KOL100725
2007 - 2012
BRP Renegade 500/800
KOL100740
2009 - 2013
Polaris Sportsman 400/500/550/800/850
KOL100760
2009 - 2013
Polaris Ranger Full Size
KOL100764
2009 - 2013
Polaris Ranger
KOL100765
2011 - 2013
Polaris RZR900 XP
KOL100820
2011 - 2013
Polaris Ranger 400/500/800 Mid Size
KOL100824
2011 - 2013
Polaris Ranger 400/500/800
KOL100840
2010 - 2013
BRP Commander
KOL100845
2009 - 2013
Kawasaki Mule 4000/4010
KOL100850
ALL
KOL100920
2012 - 2013
(KOL85045 / RT/XT40)
(KOL85045 / RT/XT40)
Bobcat UTV
Can Am Renegade 800/1000
SWEEPER & PARTS
S WEEP E R
SWEEPER POWER BRUSH
KOLSPB
»
»
»
»
»
»
»
»
Briggs & Stratton OHV
1 cylinder 200cc 6.5hp
Chain drive primary & secondary
Wheel size: 2 x 200mm castors with roller bearings
Height Control: Lever main operation / Screw thread adjustment
Fitment: FSM Super mount system with quick release
Brush: 27 of blue poly segmentations spaced
Angle of adjustment: 5 presets
(-19°, -9°, 0°, 11°, 20° respectively to the ATV)
» Dimensions (mm):
with handle: 1705 (h) x 1068 (l) x 1277 (w)
without handle: 809 (h) x 1068 (l) x 1277 (w)
SWEEPER PARTS & ACCESSORIES
KOLSPBADC
Sweeper Tube Adaptor Cycle Country
KOLSPBADW
Sweeper Tube Adaptor Warn
KOLSPBTU
Sweeper Tube
Step 1
Step 2
Step 3
Step 4
Choose your WARN central mount
Choose your WARN adaptor
(KOLSPBADW)
Sweeper Tube
(KOLSPBTU)
Sweeper Power Brush
(KOLSPB)
or
Choose your Cycle Country mid body mount
or
Choose your Cycle Country adaptor
(KOLSPBADC)
67
CABI N S
HARD CABINS
»» Best visibility 5mm hard coated clear polycarbonate door skin on a heavy/
duty tubular perimeter frame.
»» Easy installation - Over center quick clamps attach the roof and rear glass
panel. Doors lift off with no tools.
»» Weather tight seal - Automotive type gaskets used at all contact surfaces.
Keyed, two position door latches privide solid door closure and protection.
»» Driver and passenger sliding windows - Fixed tempered glass and hard-coated
polycarbonate combined to provide dust-free sealing when closed.
»» Quiet operation - Sound insulation on all steel panels to reduce noise resonance inside the cabin
»» Front panels - Made from tempered safety glass and tilts 4 - 6” (10 - 15 cm)
open for airflow or fully open for hunting.
COMPLETE HARD CABIN INCLUDING HEATER
Part Nr.
Year
Model
KOLCAB41S01U01
2004 - 2013
Yamaha Rhino 660 / 700
KOLCAB52S01U01
2010 - 2013
Can-Am Commander 800 / 1000
KOLCAB42S01U01
2005 - 2013
Kawasaki Mule 4010
KOLCAB42S02U01
2005 - 2013
Kawasaki Mule 610
COMPLETE HARD CABIN WITHOUT HEATER
68
Part Nr.
Year
Model
KOLCAB52S01U02
2010 - 2013
Can-Am Commander 800 / 1000
KOLCAB42S01U02
2005 - 2013
Kawasaki Mule 4010
69
N OT ES
NOTES:
70
N OT ES
NOTES:
71

TABLE OF CONTENTS

Transcription

Similar documents

Honda 300ex National Race Machine

Alterra 500 XT » Arctic Cat

ATV Attachments

2013 - ATV Map - Forest County ATV Association

Amateur Television (ATV)

Missouri - SD Truck Springs

www.summitATV.com

bigger. stronger. tougher

KFX - Dubach Racing Development