FD-4 Service Manual for web.p65

Transcription

Service Manual
Model
FD-4
DIGITAL MULTITRACKER
CAUTION:
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WIDE BLADE OF PLUG TO WIDE SOLT,
FULLY INSERT.
ATTENTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
POUR ÉVITER LES CHOCS ÉLECTRIQUES,
DO NOT REMOVE COVER (OR BACK).
INTRODUIRE LA LAME LA PLUS LARGE DE
NO USER-SERVICEABLE PARTS INSIDE.
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
JUSQU' AU FOND.
The lightening flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
“WARNING”
“TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.”
SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
Read instructions - All the safety and operating instructions should be read before the appliance is operated.
Retain instructions - The safety and operating instructions
should be retained for future reference.
Heed warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
Follow instructions - All operating and use instructions
should be followed.
Water and Moisture - The appliance should not be used
near water - for example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a
swimming pool, and the like.
Carts and Stands - The appliance should be used only
with a cart or stand that is recommended by the manufacturer.
9.
10.
11.
12.
13.
14.
15.
7.
8.
An appliance and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.
Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
Ventilation - The appliance should be situated so that its
location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block
the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the
flow of air through the ventilation openings.
16.
17.
Heat - The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
Power Sources - The appliance should be connected to a
power supply only of the type described in the operating
instructions or as marked on the appliance.
Grounding or Polarization - The precautions that should
be taken so that the grounding or polarization means of
an appliance is not defeated.
Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
Cleaning - The appliance should be cleaned only as recommended by the manufacturer.
Nonuse Periods - The power cord of the appliance should
be unplugged from the outlet when left unused for a long
period of time.
Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the enclosure through openings.
Damage requiring Service - The appliance should be serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the
appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked changed in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified
service personnel.
FD-4
TABLE OF CONTENTS
1. SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. CONTROLS, INDICATORS AND CONNECTORS . . . . . . . . . . .
3. SOFTWARE UPDATE . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. SERVICE MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. ERROR CODE LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6. INSTALLING 2.5" INTERNAL HARD DISK DRIVE . . . . . . . . .
7. EXPLODED VIEW, PCB ASSEMBLY AND PARTS LIST . . . . .
8. CIRCUIT DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
7
11
12
19
20
24
41
NOTES
* Service mode, error code list, explode view, PCB assembly, parts list and circuit diagrams are given in this
manual to assist the service technician in maintaining the Model FD-4.
* The following accessories are supplied with FD-4 as the standard accessories.
Owner's manual
: 8288414100 (for export model)
: 8288415000 (for domestic model)
* Following is the packing material for the Model FD-4.
Carton, inner, FD-4
Packing, side, L, FD-4
: 8228716000
: 8228440000
Packing, side, R, FD-4
: 8228441000
CAUTION
! Parts marked with this sign are safety critical components. They must always be replaced with identical
components. Refer to the Fostex Parts List and ensure exact replacement.
3
FD-4
1. SPECIFICATIONS
RECORD & REPRODUCE
Recording Medium
Standard
Sampling Frequency
Quantization
Emphasis
Recording Time (mono track min.)
Fs: 32 kHz
Fs: 44.1 kHz
Number of Tracks
NORMAL / MASTERING MODE 1
MASTERING MODE 2
Number of simultaneous recording tracks
Number of simultaneous playback tracks
Number of tracks to be pasted at a time
Recording Format
Recording Mode
ELECTRICAL (0 dBV = 1 V)
• MIXER SECTION
Reference Input Level
MIC
Impedance
LINE
Impedance
RECORDER IN
Impedance
AUX RTN
Impedance
DATA IN
Connector
Format
Reference Output Level
STEREO
Load impedance
AUX SEND
Load Impedance
MONITOR
Load impedance
HEADPHONE
DATA OUT
Connector
Format
4
External fixed / removable hard disk drive
SCSI-2 or better
32 kHz, 44.1 kHz
12-bit nonlinear, 16-bit linear
Not available
About 33 min. / 100 MB (up to 24 hours) at maximum
About 18 min. / 100 MB (up to 24 hours) at maximum
6 (4 + 2 additional tracks)
4
2
4
6
FDMS-3
NORMAL MODE (Fs: 32 kHz, 4 + 2 tracks, default)
MASTERING MODE 1 (Fs: 44.1 kHz, 4 + 2 tracks)
MASTERING MODE 2 (Fs: 44.1 kHz, 4 tracks)
-50, -30 dBV
20 kΩ or more
-10 dBV
20 kΩ or more
-10 dBV
20 kΩ or more
-20 dBV
8 kΩ or more
Square shape optical
IEC consumer optical standard IEC 958 Part 3
-10 dBV
10 kΩ or more
-10 dBV
10 kΩ or more
-10 dBV
10 kΩ or more
20 mW at maximum (Load: 16 Ω)
50 mW at maximum (Load: 50 Ω)
Square shape optical
IEC consumer optical standard IEC 958 Part 3
FD-4
ELECTRICAL (continued)
SCSI DATA input / output
Connector
D-SUB 25-pin
Protocol
SCSI-2, unbalanced transfer method
Transfer type
Asynchronous
Number of device to be connected
1
Fader / Knob Position at Reference Input / Output
MASTER fader
At 8 ~ 9 position (AUX RTN : -20 dBV / 1 kHz, AUX RTN
VR: MAX. Adjust master fader for -10 dBV output at
STEREO OUT.)
MONITOR knob
Adjust MONITOR knob for -10 dBV output at MONITOR
OUTPUT. (MON SEL: ST+MON, MON)
INPUT fader
At 7 ~ 8 position (INPUT: -10 dBV / 1 kHz, EQ GAIN: 0,
PAN: L (R). Adjust input fader for -10 dBV output at
STEREO OUT.)
Output Level
INPUT (1 ~ 4) → AUX SEND
-10 dBV +0, -2 dB (INPUT: -10 dBV / 1 kHz, EQ GAIN:
0, PAN: L (R), AUX1, 2 VR: CH MAX, input fader: at 7 ~
8 position.)
INPUT (1 ~ 4) → MONITOR
-10 dBV ± 1 dB (INPUT: -10 dBV / 1 kHz, EQ GAIN: 0,
PAN: L (R), MON VR: MON MAX, MON PAN: L (R),
input fader: at 7 ~ 8 position.)
Frequency Response
INPUT (1 ~ 4) → MONITOR
20 ~ 20 kHz +1, -3 dB (INPUT: -50 dBV)
20 ~ 20 kHz +1, -2 dB (INPUT: -10 dBV)
INPUT (1 ~ 4) → AUX SEND
20 ~ 20 kHz +1, -2 dB (INPUT: -10 dBV)
AUX RTN → MONITOR OUT
20 ~ 20 kHz +1, -2 dB (AUX RTN: -20 dBV)
AUX RTN → PHONES
80 ~ 20 kHz +1, -2 dB (AUX RTN: -20 dBV, at 20 mW /
16 Ω)
EQ Characteristics
High (12 kHz) & Low (80 Hz)
+15 dB ± 3 dB at “+15” position
-15 dB ± 3 dB at “-15” position
Mid (200 Hz ~ 5 kHz)
+15 dB ± 3 dB at “+15” position
-15 dB ± 3 dB at “-15” position
S/N
INPUT
INPUT
INPUT Σ4
Residual Noise
LEVEL
-50 dBV
-38 dBV
-10 dBV
+2 dBV
-50 dBV
-38 dBV
-10 dBV
+2 dBV
VR MIN
OUTPUT
LEVEL
-10 dBV
AUX SEND
+2 dBV
AUX SEND
-10 dBV
AUX SEND
+2 dBV
AUX SEND
-10 dBV
MONITOR
+2 dBV
MONITOR
-10 dBV
MONITOR
+2 dBV
MONITOR
PHONES
S/N
UNWTD.
66 dB or more
78 dB or more
80 dB or more
92 dB or more
63 dB or more
75 dB or more
73 dB or more
85 dB or more
AWTD.
68 dB or more
80 dB or more
82 dB or more
94 dB or more
65 dB or more
77 dB or more
75 dB or more
87 dB or more
-75 dBV or less
5
FD-4
ELECTRICAL (continued)
Distortion
INPUT
INPUT
AUX RTN
LEVEL
-40 dBV
0 dBV
0 dBV
-10 dBV
-10 dBV
OUTPUT
LEVEL
0 dBV
MONITOR
0 dBV
MONITOR
0 dBV
AUX SEND
0 dBV
MONITOR
20 mW
PHONES
Crosstalk
Click Noise
Power on / off
Other switching
MIDI Controlling
• RECORDER SECTION
Frequency Response
Fs: 44.1 kHz
Fs: 32 kHz
Full Scale Output Level (Ref: -12dB)
Dynamic Range
Total Harmonic Distortion
Fs: 44.1 kHz
Fs: 32 kHz
Channel Separation
S/N
Power Consumption
JPN
Others
S/N
UNWTD.
100 ~ 10 kHz
100 ~ 10 kHz
100 ~ 10 kHz
100 ~ 10 kHz
1 kHz
AWTD.
0.05 % or less
0.05 % or less
0.05 % or less
0.05 % or less
0.10 % or less
60 dB or more / 1 kHz
-20 dBV p-p or less
-50 dBV p-p or less
Operation check should be executed using the test mode
with connecting the MIDI IN and OUT terminal.
20 ~ 20 kHz +1, -2 dB
20 ~ 14.5 kHz +1, -2 dB
+2 dBV ± 1 dB (Fs: 32 kHz / 44.1 kHz)
88 dB or more (Fs: 32 kHz / 44.1 kHz)
0.02 % or less
0.08 % or less
80 dB or more / 1 kHz at max. recording level
(Fs: 32 kHz / 44.1 kHz)
88 dB or more (A-WTD., Fs: 32 kHz / 44.1 kHz)
13 W +5, -20 %
15 W +5, -20 %
Specifications and appearance are subject to change without notice for product improvement.
6
FD-4
2. CONTROLS, INDICATORS & CONNECTORS
Rear Panel
POWER
DATA
IN
SCSI
R
R MON OUT L
ST OUT
2
L
AUX SEND
1
R
PUNCH
IN/OUT
DATA
OUT
R
AUX RTN 2
MONO/L
MIDI
IN
MIDI
OUT
AUX RTN 1
MONO/L
4
INSERT
RECORDER IN
R
L
3
INPUT 4
INPUT 3
Control Panel
AUX
AUX
AUX
AUX
0
0
0
0
AUX1
AUX1
AUX2
HIGH
0
-
-
-
-
300
300
2k
200
2k
200
5k
LOW
-
-
+
2k
200
+
300
0
10
2k
200
5k
RECORD TRACK
LOW
-
+
10
900
5k
0
0
2
MID
SHIFT
300
LOW
0
+
0
+
900
5k
LOW
0
1
MID
GAIN
MID
SHIFT
900
0
+
0
+
MID
SHIFT
900
MID
GAIN
0
+
MID
SHIFT
AUX2
EQ
HIGH
0
+
MID
GAIN
0
AUX1
AUX2
EQ
HIGH
0
+
MID
GAIN
AUX1
AUX2
EQ
EQ
HIGH
AUX RTN
0
1/L
-
+
2/R
MON
MON
MON
MON
0
0
0
0
INPUT
INPUT
TRK1
INPUT
TRK2
MON SECTION
TRK4
MON R
MON L
PAN
MON R
MON L
PAN
MON L
MON R
PAN
0
MON R
IN
OUT
END
IN
AUTO PUNCH
AUTO RTN
MASTER
PAN
HOLD/
MON L
L
R
PREVIEW
INPUT
TRK3
PAN
PAN
4/R
ADD. TRACK
START
PAN
3/L
+
STORE
OUT
DISP SEL
SETUP
TIME BASE
SEL
EXECUTE
/YES
EXIT
/NO
CLIPBOARD
EDIT
UNDO/
REDO
AUTO RTN
AUTO PLAY
LOCATE
10
PAN
PGM SEL
VARI
PITCH
L
L
R
INPUT SEL
L
R
INPUT SEL
INPUT
OFF
OFF
TRK 2
R
INPUT SEL
INPUT
OFF
TRK 1
L
R
INPUT SEL
INPUT
TRK 3
SELECTOR
INPUT
L/R
OFF
L/R+MON
TRK 4
SHIFT
MON
AUTO
PUNCH
1
2
3
EJECT
ACCESS
L/R
4
10
10
10
10
10
5
5
5
5
5
0
0
0
0
0
H
H
M
M
L
L
RECORD
P. EDIT
JOG
LOC MEM
CLIPBOARD PLAY
LOCATE ABS 0
LOCATE REC END
STOP
PLAY
REWIND/
SHUTTLE
F FWD/
LEVEL
LEVEL
Front Panel
1
2
3
4
7
FD-4
Control Panel (Mixer Section)
AUX
AUX
AUX
AUX
0
0
0
0
AUX RTN
7
AUX1
AUX1
AUX2
HIGH
0
-
-
6
-
-
300
2k
200
300
5k
LOW
2k
200
LOW
0
-
-
+
2k
200
+
300
0
10
8
2k
200
5k
LOW
-
+
10
900
5k
0
0
2
MID
SHIFT
300
LOW
0
+
0
+
900
5k
1
MID
GAIN
MID
SHIFT
900
0
+
0
+
MID
SHIFT
900
MID
GAIN
0
+
MID
SHIFT
AUX2
EQ
HIGH
0
+
MID
GAIN
0
AUX1
AUX2
EQ
HIGH
0
+
MID
GAIN
AUX1
AUX2
EQ
EQ
HIGH
0
-
+
+
MON
MON
MON
MON
0
0
0
0
MON SECTION
5
INPUT
INPUT
TRK1
INPUT
TRK2
INPUT
TRK3
TRK4
MASTER
PAN
PAN
PAN
PAN
4
9
MON L
MON R
MON L
PAN
MON R
MON L
PAN
MON L
MON R
PAN
0
MON R
10
PAN
3
L
2
L
R
INPUT SEL
L
R
INPUT SEL
SELECTOR
INPUT
INPUT
INPUT
L/R
OFF
OFF
OFF
OFF
L/R+MON
TRK 2
2
TRK 3
TRK 4
3
MON
10
10
10
10
5
5
5
5
5
0
0
0
0
0
H
H
M
M
L
L
LEVEL
1. Input faders [1-4]
2. Input select switches
[INPUT SEL (INPUT/OFF/TRK)]
3. Panpot knobs [PAN (L/R)]
4. Monitor panpot knobs [PAN (MON L/MON R)]
5. Monitor level control knob [MON (INPUT/TRK)]
6. Equalizer control knobs [EQ (HIGH/MID/LOW)]
7. AUX send knobs [AUX (AUX 1/AUX 2)]
10
L/R
4
10
1
8
R
INPUT SEL
INPUT
TRK 1
1
L
R
INPUT SEL
LEVEL
8. AUX return knobs [AUX RTN (1, 2)]
9. Monitor master knob
[MONITOR SECTION (MASTER)]
10. Monitor select switch
[SELECTOR (L/R, L/R+MON, MON)]
11. Master fader [L/R]
12. Input level switches [LEVEL (H/M/L)]
11
12
FD-4
Control Panel (Recorder Section)
41
37
38
34
33
14
40
13
15
16
2/R
3/L
START
IN
OUT
4/R
L
END
IN
39
R
18
ADD. TRACK
PREVIEW
36
AUTO PUNCH
AUTO RTN
HOLD/
32
29
OUT
DISP SEL
SETUP
TIME BASE
SEL
EXECUTE
/YES
EXIT
/NO
CLIPBOARD
EDIT
UNDO/
REDO
AUTO RTN
AUTO PLAY
LOCATE
STORE
PGM SEL
VARI
PITCH
28
35
17
RECORD TRACK
1/L
SHIFT
AUTO
PUNCH
RECORD
EJECT
P. EDIT
ACCESS
JOG
LOC MEM
CLIPBOARD PLAY
LOCATE ABS 0
LOCATE REC END
STOP
PLAY
REWIND/
F FWD/
30
21
22
23
25
27
13. Record track select keys
[RECORD TRACK (1/L, 2/R, 3/L, 4/R, L, R)]
14. LCD
15. Contrast adjustment knob
16. Display indication select key
17. Setup key [SETUP]
18. Time Base select key
19. Execute/Yes key [EXECUTE/YES]
20. Exit/No key [EXIT/NO/ EJECT ]
21. Access LED [ACCESS]
22. JOG dial [JOG/ SHUTTLE ]
23. Fast forward button [F FWD/ ]
24. Rewind button [REWIND/ ]
25. Play button [PLAY]
26. Stop button [STOP]
27. Record button [RECORD/ AUTO PUNCH ]
SHUTTLE
24
31
26
19
20
28. Shift key [ SHIFT ]
29. Vari Pitch key [VARI PITCH/ P.EDIT ]
30. Auto Return/Auto Play mode on/off key
[AUTO RTN/AUTO PLAY]
31. Locate key [LOCATE/ LOC MEM ]
32. Hold/
key [HOLD/ ]
33. Store key [STORE]
34. Undo/Redo key [UNDO/REDO]
35. Edit key [EDIT]
36. Auto Return Start key [AUTO RTN START/ PREVIEW ]
37. Auto Return End key [AUTO RTN END/ PREVIEW ]
38. Auto Punch In key [AUTO PUNCH IN/ PREVIEW ]
39. Auto Punch Out key [AUTO PUNCH OUT/ PREVIEW ]
40. Clipboard In key [CLIPBOARD IN/ PREVIEW ]
41. Clipboard Out key [CLIPBOARD OUT/ PREVIEW ]
9
FD-4
Front Panel
2
1
1
2
4
3
1. Input jacks [1, 2, 3, 4] (Phone)
2. Headphone jack [PHONES] (TRS Phone)
Rear Panel
2
1
3
4
6
5
INPUT 4
R MON OUT L
R
ST OUT
L
2
AUX SEND
14
10
AUX RTN 2
MONO/L
DATA
IN
R
DATA
OUT
AUX RTN 1
MONO/L
PUNCH
IN/OUT
4
MIDI
IN
13 12 11 10 9
Monitor Out jacks [MON OUT L, R] (RCA pin)
Stereo Out jacks [ST. OUT L, R] (RCA pin)
AUX Send jacks 1, 2 [AUX SEND 1, 2] (Phone)
AUX Return jacks 1, 2 [AUX RTN 1, 2] (Phone)
Insert jacks 3, 4 [INSERT 3, 4] (TRS Phone)
Balanced input connectors 3, 4 [INPUT 3, 4]
(Balanced XLR)
7. Recorder in jacks L, R [RECORDER IN L, R]
(RCA pin)
1.
2.
3.
4.
5.
6.
R
SCSI
POWER
15
1
8.
9.
10.
11.
12.
13.
14.
15.
INSERT
INPUT 3
3
MIDI
OUT
RECORDER IN
R
L
8
7
MIDI OUT jack [MIDI OUT] (DIN 5-pin)
MIDI IN jack [MIDI IN] (DIN 5-pin)
Punch in/out jack [PUNCH IN/OUT] (Phone)
Data output jack [DATA OUT] (OPTICAL)
Data input jack [DATA IN] (OPTICAL)
SCSI connector [SCSI] (D-SUB 25-pin)
Power cable
Power switch [POWER]
FD-4
3. SOFTWARE UPDATE
The FD-4 software can be updated through SCSI port. This means that unscrewing and opening up the FD-4 top panel is not
necessary to change the EPROMs on the MAIN PCB assy. Please refer to the following explanation for correct software
updating procedures.
3-1. Method of Sending Software from Fostex Japan
There are two ways of sending the FD-4 updated software.
1. Updated software in a removable media (e.g. floppy disk, zip disk, etc.) to be sent via airmail
2. Updated software as an attachment file to be sent via E-mail
3-2. Required Tools
The following tools/equipment are required to update the FD-4 software.
1.
2.
3.
4.
IBM PC compatible computer with SCSI board
Removable type SCSI drive
Cable between the removable type SCSI drive and the SCSI board
Cable between the removable type SCSI drive and the FD-4 (D-SUB 25-pin)
3-3. Software Updating Procedures
Presuming that the updated software is correctly sent and is copied into your computer.
1.
2.
3.
4.
5.
6.
7.
Connect the removable type SCSI drive to the SCSI board.
Insert the diskette to the removable type SCSI drive and format it by the computer (IBM PC format).
Copy the updated software file to the removable type SCSI drive (diskette).
Reconnect the removable type SCSI drive to the FD-4 SCSI port.
In order to boot up the FD-4 system software, insert the diskette formatted by the FD-4.
Eject the diskette by pressing the EXIT/NO key while holding down the SHIFT key.
Insert the diskette with updated software file. The FD-4 LCD display shows “No Disk”, “Initial..”, “name of drive (e.g.
ZIP 100)” and “FD4MOT” in order and comes to a standstill at the display below.
: Blinking
DIGITAL
SURE ?
SYNC OUT
DRIVE
AUTO
A.PUNCH
SCSI
8. Pressing the EXECUTE/YES key would update the software. The display shows “Loading!”, “Writing!” and “Initial..”
in order and automatically returns to the above condition again. This indicates that updating the software is completed.
9. Eject the diskette with updated software file and insert the diskette formatted by the FD-4.
10. Check the software version by the Service Mode. (For details, please refer to the section “4-2. Software/CPU version”.)
CAUTION:
1. The diskette in which the updated software file is copied must be formatted by IBM PC computer, not by Macintosh.
2. If something wrong happens while updating the software (e.g. A blackout occurred while updating the software.), the
FD-4 might not be able to boot up the system software inside the Flash ROM. In this case, please refer to the section “48. Flash ROM” (page 17).
11
FD-4
4. SERVICE MODE
There are various optional modes available in the FD-4 Service Mode. Please utilize them when servicing the unit.
4-1. Putting FD-4 into Service Mode
The way of putting the FD-4 into Service Mode is as follow.
1) Connect a SCSI device, insert the diskette formatted by the FD-4 and turn it on.
2) Turn on the power of FD-4.
3) While holding down the STOP button and SHIFT key, press the SETUP key.
As shown below, by rotating the jog dial C.W. or C.C.W., various optional modes will be displayed in addition to the
general SETUP menus. In order to select a certain optional mode, press the EXECUTE/YES key while its menu is
displayed.
Format?
Sign.Set?
TempoSet?
Save PGM?
C.W.
Load PGM?
C.W.
DeviceID?
TitleEdit?
Version?
N/A
Del. PGM?
DA Test?
N/A
Resolu?
N/A
C.W.
Click ?
Disp.Test?
C.W.
SelfCheck?
Freeblock?
Digi.out?
Preroll?
OfsetDisp?
C.W.
NOsEvent?
Digi.in?
C.W.
FrameRate?
FlashROM? Init.Disk?
RecProtct?
SlaveType?
SyncOut?
C.W.
MtcOffset?
SlaveMode?
OfsetMode?
: Service Mode
N/A: Not Available
4-2. Flash ROM/CPU version
: Blinking
SYNC OUT
CLK
AUTO
In order to check the version number, press the “EXECUTE/
YES” key while “?” is blinking.
DRIVE
SCSI
A.PUNCH
: Blinking
SYNC OUT
CLK
AUTO
12
This mode is used to check the Flash ROM and CPU versions
currently installed in the unit.
The example on the left indicates that the Flash ROM version
is V1.00 and its programming date is February 28, 1998.
In this condition, by turning the jog dial C.W., the CPU
version can be checked.
DRIVE
SCSI
A.PUNCH
FD-4
: Blinking
SYNC OUT
CLK
The example on the left indicates that the CPU version is
V1.00 and its programming date is January 19, 1998.
DRIVE
SCSI
AUTO
A.PUNCH
4-3. DA Test
: Blinking
SYNC OUT
CLK
DRIVE
SCSI
AUTO
A.PUNCH
This mode test the signal flow from the DATA INPUT jack
to the D/A converter. A S/P DIF digital signal whose
sampling frequency is the same as the one when formatting
the diskette (MASTERING MODE 1, 2: 44.1kHz,
NORMAL MODE: 32kHz) must be input to the DATA
INPUT jack.
To execute this test, press the EXECUTE/YES key while
“?” is blinking.
: Blinking
DIGITAL
32kHz
SYNC OUT
CLK
DRIVE
SCSI
AUTO
1
2
3
4
L
If the FD-4 is in a normal condition, “32kHz or 44.1kHz”
and “DIGITAL” will be lit solid. The odd (1 and 3) and
even (2 and 4) channels indicate the L and R input level of
S/P DIF digital signal fed to the DATA INPUT jack
respectively.
A.PUNCH
If the FD-4 is not in a normal condition, “32kHz or 44.1kHz”
and “DIGITAL” will blink and the bargraph meter will not
indicate any input level.
R
4-4. Display/Button Test
: Blinking
SYNC OUT
CLK
SCSI
REMAIN
LOC
MTC
IN
DIGITAL
MIDI
SLAVE
32kHz 44.1kHz 48kHz
SETUP MTC OFFSET
BAR
ABS
H
M
A.PUNCH
RHSL
TAKE
RTN
MTC
To execute this test, press the EXECUTE/YES key while
“?” is blinking.
DRIVE
AUTO
PLAY
S
This mode tests if all the segments on the LCD display and
the LEDs on the FD-4 top panel are correctly working or
not.
CLK
MB
F
DF
SF
%
If the FD-4 is in a normal condition, all the segments on the
LCD display will lit solid and the LEDs on the top panel
will start blinking.
VARI PITCH TEMPO PGM
SURE ?
COMPLETED!
SYNC OUT
CLK
MTC
AUTO
PLAY
RTN
DRIVE
IDE
SCSI
A.PUNCH
RHSL
TAKE
If the FD-4 is not in a normal condition, the faulty segments
on the LCD display and/or LEDs on the top panel will remain
unlit.
13
FD-4
In this condition, if the EXECUTE/YES key is pressed one
more time, the Button Test can be executed.
SYNC OUT
CLK
AUTO
DRIVE
SCSI
A.PUNCH
The Button Test checks if each key/button and jog dial are
working properly or not. The display on the left indicates
that the RECORD button is pressed. (“K” stands for the Key
and “J” the Jog dial.)
The display on the left indicates that the jog dial is turned
C.W.
SYNC OUT
CLK
AUTO
DRIVE
SCSI
A.PUNCH
The table below shows the relationship between the key/
button/jog dial and the corresponding numbers appear on
the LCD display.
In order to quit the Button Test, turn the jog dial C.W. or
C.C.W. further after “J 020” or “J-19” is displayed
respectively.
Key/Button/Jog Dial
RECORD
STOP
PLAY
REWIND/
F FWD/
SHIFT
VARI PITCH/ P.EDIT
AUTO RTN/PLAY
LOCATE/ LOC MEM
HOLD/
STORE
No.
K01
K02
K03
K04
K05
K06
K07
K08
K09
K10
K11
Key/Button/Jog Dial
EDIT
UNDO/REDO
EXECUTE/YES
EXIT/NO/ EJECT
AUTO RTN START
AUTO PUNCH IN
AUTO PUNCH OUT
AUTO RTN END
CLIPBOARD IN
CLIPBOARD OUT
DISP SEL
No.
K12
K13
K14
K15
K16
K17
K18
K19
K20
K21
K22
Key/Button/Jog Dial
SETUP
TIME BASE SEL
RECORD TRACK 1/L
RECORD TRACK 2/R
RECORD TRACK 3/L
RECORD TRACK 4/R
RECORD TRACK 5/L
RECORD TRACK 6/R
JOG DIAL (C.W.)
JOG DIAL (C.C.W.)
No.
K23
K24
K25
K25
K25
K25
K25
K25
J 00 ~ 20
J -00 ~ -19
4-5. Self Check
: Blinking
SYNC OUT
CLK
AUTO
14
DRIVE
SCSI
A.PUNCH
This mode automatically tests the following points in order.
• SCSI bus
• ATA bus
• MIDI in/out circuit
• S/P DIF digital signal (44.1kHz)
• 32kHz digital signal
• Vari-pitch circuit
• A/D and D/A circuit (Input Monitor)
FD-4
<Cable Connection in “Self Check” Mode>
INPUT 4
R MON OUT L
R
ST OUT
L
2
AUX SEND
1
SCSI
POWER
External
SCSI Drive
R
AUX RTN 2
MONO/L
DATA
IN
R
DATA
OUT
Optical
Cable
AUX RTN 1
MONO/L
PUNCH
IN/OUT
4
MIDI
IN
INSERT
INPUT 3
3
MIDI
OUT
MIDI cable
RECORDER IN
R
L
Apply
audio signal.
To start the Self Check mode, press the EXECUTE/YES
key when “?” is blinking (condition indicated in the previous
page).
SYNC OUT
CLK
AUTO
DRIVE
SCSI
A.PUNCH
As shown in the left, “SelfCheck”, “Initial..”, name of
connected SCSI drive (The example in the left shows that
the ZIP drive is connected to the FD-4 SCSI port.) and “ATA
Bus C (Check)” appear on the FD-4 LCD display in order.
Since a 2.5" internal E-IDE hard disk drive is not installed
in the FD-4, the Self Check mode comes to a standstill at
“ATA Bus Check” test.
SYNC OUT
CLK
AUTO
SYNC OUT
CLK
AUTO
DRIVE
SCSI
A.PUNCH
DRIVE
SCSI
A.PUNCH
In order to continue the Self Check mode, press the
EXECUTE/YES key.
If the FD-4 is in a good shape, “Check OK!” will be displayed
and the FD-4 is automatically put into Input Monitor mode
with all the RECORD TRACK LEDs and RECORD LED
flashing after checking the points mentioned in the previous
page. In this condition, if a signal is applied to the FD-4
RECORDER IN (L, R) jacks, its level can be monitored on
the bargraph level meter.
To quit the Self Check mode, press the EXIT/NO key when
“Check OK!” is displayed.
SYNC OUT
CLK
AUTO
SYNC OUT
CLK
AUTO
1
2
3
4
L
DRIVE
SCSI
A.PUNCH
DRIVE
SCSI
A.PUNCH
R
15
FD-4
The followings are examples of error message when the FD-4 is not working properly.
• SCSI function
• MIDI function
SYNC OUT
CLK
DRIVE
SCSI
AUTO
A.PUNCH
• Digital Signal in/out (Fs: 44.1kHz)
SYNC OUT
CLK
AUTO
DRIVE
SCSI
A.PUNCH
• Digital Signal in/out (Fs: 32kHz)
44.1kHz
SYNC OUT
CLK
DRIVE
SCSI
AUTO
A.PUNCH
SYNC OUT
CLK
AUTO
DRIVE
SCSI
A.PUNCH
• Vari-pitch function
VARI PITCH
SYNC OUT
CLK
DRIVE
SCSI
AUTO
A.PUNCH
4-6. Offset Display
: Blinking
SYNC OUT
CLK
DRIVE
SCSI
AUTO
A.PUNCH
OFFSET
H
M
S
DF
SYNC OUT
CLK
AUTO
16
This mode determines if the offset value against a master
machine should be displayed or not when the FD-4 is
working as a slave machine.
If you would like to turn ON the offset display, press the
EXECUTE/YES key while “?” is blinking. (The default
setting is “off”.) Then, turn the jog dial C.W and press the
EXECUTE/YES key.
In order to display the offset value, select the “MTC” by the
TIME BASE key and the “REMAINING TIME” as DISP
SEL key.
SF
DRIVE
SCSI
A.PUNCH
CAUTION:
1. There might be a case that the percentage display does
not indicate “0.0%” exactly when the FD-4 is working as
a slave machine and is synchronizing with a master
machine. This is caused by a difference of internal clock
between both machines but there is nothing wrong with it.
2. The two-digit numbers displayed in the right of percentage
display (“05” in the left example) is only for software
programming purpose.
FD-4
4-7. Initializing Disk
This mode initializes an external SCSI device connected to
the SCSI port or a 2.5" internal E-IDE hard disk drive. The
disk drive currently connected can be initialized.
SYNC OUT
CLK
AUTO
DRIVE
SCSI
A.PUNCH
After pressing the EXECUTE/YES key, “SURE?” will start
blinking in the LCD display. In this condition, pressing the
EXECUTE/YES key one more time would initialize the
selected disk drive.
This mode puts the disk back to the condition originally
formatted and is equal to “Quick Format”.
4-8. Flash ROM
: Blinking
SYNC OUT
CLK
AUTO
DRIVE
SCSI
A.PUNCH
This mode is used when copying the system software from
EPROMs to Flash ROM.
As mentioned in the section “SOFTWARE UPDATE”, the
FD-4 software inside the Flash ROM can be updated through
SCSI port. However, if something wrong happens when
updating the software (e.g. A blackout occurred while
updating the software.), the FD-4 might not be able to boot
up the system software inside the Flash ROM.
In this case, the following procedures must be taken.
1.
2.
3.
4.
Turn the switch S1 on the MAIN PCB assy to “EPROM” side.
Mount and solder the EPROM sockets to “U31” and “U32” on the MAIN PCB assy.
Plug the EPROMs into the sockets.
Turn on the power of FD-4.
In this condition, the FD-4 is booted up using the system software inside the EPROMs. The next procedures to take are as
follows.
1. Put the FD-4 into the Service Mode, select “FlashROM” and press EXECUTE/YES key. (“SURE?” is blinking.)
2. Press the EXECUTE/YES key one more time to copy the system software from EPROMs to Flash ROM.
3. Turn the switch S1 to “FLMEM” side.
4. In order to confirm that the FD-4 is booted up using the system software inside the Flash ROM, turn off the power,
disconnect the EPROMs and turn the power back on again.
5. After the confirmation, update the system software inside the Flash ROM through SCSI port again.
4-9. Event Number
Individual Audio Files are continuously recorded in each track of program on the FD-4. However, the FD-4 disk
management system allows to create a “no signal recorded” section between Audio Files. This “no signal recorded”
section is handled as “Zero File”. As shown in the diagram below, Audio Files and Zero Files will be alternately recorded
on the FD-4 and each Audio File and Zero File are counted as individual “Event”. Thus, the number of events on a certain
track is calculated by summing up these Audio Files and Zero Files. Each track can accommodate up to 512 events but the
FD-4 will not newly record events when the number of events reach 508.
: Recorded part (shortest length: 740msec, Fs=44.1kHz)
: Non-recorded part (shortest length: 740msec, Fs=44.1kHz)
ABS 0
Event No.
ABS END
Audio File 1
Zero File 1
Audio File 2
Zero File 2
Audio File 3
1
2
3
4
5
ABS 23h 59m
17
FD-4
: Blinking
SETUP
SYNC OUT
CLK
AUTO
This Service Mode allows to check the Event Number
recorded on each track in one program on the FD-4.
In order to check, press the EXECUTE/YES key while “?”
is blinking.
DRIVE
SCSI
A.PUNCH
The example in the left indicates that there are 3 events
created on track 1. By turning the jog dial C.W., you can
check the event number on track 2, 3, 4...
SETUP
SYNC OUT
CLK
MTC
AUTO
PLAY
RTN
DRIVE
IDE
SCSI
A.PUNCH
RHSL
TAKE
CAUTION:
If a long recording and/or many editing is committed, the
Event Number increases. If the Event Number is getting
closer to its maximum limit (508), please save/load the data
to/from an external DAT recorder or SCSI device. During
save/load procedures, Audio Files can be optimized and as
a result, the Event Number decreases.
4-10. Free Block Check
: Blinking
SYNC OUT
CLK
AUTO
SYNC OUT
CLK
AUTO
18
DRIVE
SCSI
A.PUNCH
DRIVE
SCSI
A.PUNCH
This mode is used to check the condition of the diskette
inserted into an external SCSI drive connected to the FD-4.
If the Free Block indicates a large number even after
formatting the diskette and no signal is recorded, the diskette
can be judged to be in a bad condition.
FD-4
5. ERROR CODE LIST
The chart below indicates the error code number and corresponding description. Since the error code list is basically
designed for our engineers to improve the software, the description is quite technical. If you find the FD-4 with one of the
error codes displayed, we encourage you to update the software first. In case updating the software does not solve the
problem, we would like you to inform us about details.
FD-4 ERROR CODE LIST
ERROR
CODE
DESCRIPTION
1
Audio File address breaks into System File.
3
SCSI drive does not boot up correctly when in SCSI access operation.
9
When saving system region sector, its address is registered in Free_block File during Free block File
checking procedure.
10
Link_pointer which links Audio File indicates smaller address (out of region) than Link_File address region in
RAM.
11
Link_pointer indicates larger address (out of region) than Link_File address region in RAM.
12
“Pointer_addre” calculation of Link_Pointer is not correct.
14
Link_Pointer during recording/reproducing indicates smaller address (out of region) than actual Link_File
address region.
15
Link_Pointer during recording/reproducing indicates larger address (out of region) than actual Link_File
address region.
16
“Pointer_addre” calculation of Link_Pointer during recording/reproducing is not correct.
20
src_cash_load: Improper access of link address occurred while PASTE editing.
21
bak_cash_load: Program link during PASTE/MOVE editing is incorrect.
22
bak_cash_load: Imcompatibility problem occurred on program link during PASTE/MOVE editing.
30
Error when executing MOVE editing. Improper Link Pointer. Error in “bak_cash_load” function.
31
32
35
Backup_Save:Error occurred when saving data to SCSI device.
36
Backup_Load: Error occurred when loading data from SCSI device.
38
Displayed in Test Mode only. SCSI device cannot be recognized during initial test.
40
dis_cah_load: Improper access occurred when recording/reproducing.
41
42
45
get_non_des_block: Remaining disk capacity is insufficient.
52
non_des_cash_save_sub: Improper access occurred when recording/reproducing.
60
remake_free_block: There was improper access to program management region.
61
62
remake_free_block: Number of manageable events exceeds limit.
63
64
remake_free_block: There is an overlapping section in program management region.
96
There was improper access to program management region.
97
There was improper access to program management region when saving System File.
99
There was improper access when fading in/out.
19
FD-4
6. INSTALLING 2.5" INTERNAL HARD DISK DRIVE
The Model 9045 and a 2.5" E-IDE hard disk drive installing procedures are explained below.
Model 9045 Contents
• Bracket, HD, FD-4 (P/N: 8221234000) x 2
• Connector, PI, header, 50P, AMPMOD (P/N: 8245314000) x 1
• Cable, flat, 2P, L150 (P/N: 8276292015) x 1
• Cable assy, flat, 50P, P1.0, AMPMOD, L150 (P/N: 8277465015) x 1
• 14 x screws (P 3 x 4 CZn)
Installing Procedures
1) Loosen 14 x screws (BBT 3 x 8 BZn) which fix the FD-4 Top Panel section to the Bottom Panel section.
2) Remove the following cables from the connectors on the MAIN PCB assy.
• 9-pin cable to the J3 (coming from MIXER A PCB assy)
• 9-pin cable to the J7 (coming from DISPLAY PCB assy)
Top Panel section
MAIN PCB assy
Bottom Panel section
7- J10
pin
9- J3
pin
9- J7
pin
BBT 3x8 BZn
20
BBT 3x8 BZn
FD-4
3) Remove the MAIN PCB assy by loosening the following screws.
• 5 x screws (B 3 x 6 CZn) fixing the PCB assy from top
• 6 x screws (BBT 3x8 BZn) fixing the PCB from rear
• 2 x Fix-Stand fixing the D-SUB 25-pin connector
4) Mount and solder the 50-pin connector and 2-pin cable. (Before soldering, you might need to remove the soldering by
a solder remover.)
Cable, flat, 2P, L150
nl
E
ar
ge
d
w
ie
V
of
Connector, PI, header,
50P, AMPMOD
M
IN
A
C
P
B
sy
as
B 3 x 6 CZn
IN
A
M
B
C
P
sy
as
BBT 3 x 8 BZn
Fix-Stand
21
FD-4
5) Put back the MAIN PCB assy to the Bottom Panel section by tightening the following screws.
• 5 x screws (B 3 x 6 CZn) fixing the PCB assy from top
• 6 x screws (BBT 3x8 BZn) fixing the PCB from rear
• 2 x Fix-Stand fixing the D-SUB 25-pin connector
6) Using 4 x screws (P 3 x 4 CZn), fix the HD Bracket to a 2.5" E-IDE hard disk drive.
7) Using 4 x screws (P 3 x 4 CZn), fix the 2.5" E-IDE hard disk drive/HD bracket to the Bottom Panel section.
(During the above procedures 6) and 7), adjust the tightening position of screws to the HDD and to the bottom panel
so that screws are not bothered from each other.)
B 3 x 4 CZn
ve
E Dri
-ID k
E is
5" D
2. ard
H
B 3 x 4 CZn
B 3 x 4 CZn
1
2
49
50
Bracket, HD, FD-4
B 3 x 4 CZn
B3x6
CZn
BBT 3 x 8
BZn
IN
A
M
Fix-Stand
C
P
B
sy
as
22
FD-4
8) Connect the 50-pin flat cable between J12 of MAIN PCB assy and the HDD connectors. When connecting, in order to
connect pins straight, do not twist or turn the cable. (Pin-1 of J12 (RED) must go to Pin-1 of HDD connectors.)
9) Connect the following cables from the connectors on the MAIN PCB assy.
• 9-pin cable to the J7 (coming from DISPLAY PCB assy)
10) Tighten 14 x screws (BBT 3 x 8 BZn) which fix the FD-4 Top Panel section to the Bottom Panel section.
7- J10
pin
9- J3
pin
RED 9- J7
pin
Cable assy, flat, 50P,
P1.0, AMPMOD,
L150
BBT 3 x 8 BZn
BBT 3 x 8 BZn
23
FD-4
7. EXPLODED VIEW, PCB ASSEMBLY AND PARTS LIST
FD-4 OVERALL EXPLODED VIEW & PARTS LIST
Ref. No.
1
2
3
4
5
6
7
8
9
10
! 11
12
13
14
15
16
17
18
19
20
! 21
Part No.
8212 6100 00
8212 6090 00
8221 2290 00
8274 1240 00
8216 6641 00
8226 2370 00
8274 1220 00
8226 2230 01
8274 1360 00
8274 1370 00
8274 1380 00
8204 0820 00
8221 2270 00
8274 1230 00
8226 2380 00
8216 6670 00
8226 1601 03
8226 2390 01
8207 0005 00
8207 0120 00
8276 8351 00
8276 0030 00
8276 0060 00
8276 8790 00
22
24
23
24
25
26
8207 0084 00
8207 0084 01
8253 4620 01
8216 6650 00
8216 6361 00
8242 2340 13
27
28
29
8276 9140 06
8276 8720 14
8276 3750 09
30
31
8207 0117 01
8277 3530 15
Description
Window, LCD, FD-4
Panel, top, FD-4
Panel, bottom, FD-4
PCB assy, XLR, FD-4
Shield, mixer, FD-4
Button assy, control, FD-4
PCB assy, Mixer A, FD-4
Knob, volume, C
PCB assy, Display, FD-4
PCB assy, Main, FD-4
PCB assy, Power, FD-4
Plate, mounting, B
Bracket, jack, FD-4
PCB assy, Jack, FD-4
Knob, jog, FD-4
Sheet, jog, FD-4
Knob, slide, N4.5
Knob, fader, N4.5
Cord, holder
Foot, FF-822
Cord, power, CSA, non
integral, USA/CND
Cord, power, JPN
Cord, power, EUR
Cord, power, BS, 2C, PHE-8,
UK
Bushing, 2271 (Except CND)
Bushing, 3P31, CND
SW, P, Power, SDDJF1-A-2
Sheet, isolation, power, FD-4
Cushion, battery, PD-4/FD-4
Filter, EMI, ferrite, core,
HF70RH16x28x10
Tube, UL, black, L60
Tube, UL, clear, 16, L140
Cable assy, earth lug, D3,
L90
Cord holder, CS-1
Cable assy, earth lug, D3-D3,
#20, L150
Ref. No.
32
!
!
33
34
35
Part No.
Description
8277 3530 20 Cable assy, earth lug, D3-D3,
#20, L200
8274 1390 00 PCB assy, AC In, FD-4
8239 0007 08 Fuse, 20, TDLY, 0.8A, 250V
8216 6361 01 Cushion, button, FD-4
FD-4
FD-4 OVERALL EXPLODED VIEW
25
FD-4
26
FD-4 PCB PATTERN DRAWING
• Parts Side of MAIN PCB assy
• Foil Side of MAIN PCB assy
FD-4
27
FD-4
• MIXER A, JACK and XLR PCB assys
28
FD-4
• DISPLAY PCB assy
29
FD-4
30
• POWER and AC IN PCB assys
FD-4
FD-4 Parts List
• MAIN PCB assy
Ref. No.
B001
Part No.
Description
8274 1370 00 PCB Assy, Main, FD-4
8251 5191 00 Plain PCB, Main, FD-4
Ref. No.
U001, 002
Part No.
8236 5403 01
U003, 004
U005
U006
U007
U008
8236 0818 00
8236 5610 04
8236 0828 00
8236 0829 00
U009, 010
U011
U012
U013
U014
U015
8236 5034 00
8234 0199 00
8236 5600 14
8236 5025 00
8236 5701 01
8236 0838 01
U016~019
U020~023
U024
U025~028
U029
U030
8236 5704 01
8236 5600 32
8236 5601 57
8236 0840 11
U031, 032
U033
8236 0831 00
U034, 035
U101, 201
8236 5050 11
U151
U152, 252
U352, 452
U153, 253
U353, 453
U901, 902
U903
U904
Ref. No.
D001
D002
D003~006
D007
8236 5407 00
8236 5408 00
8236 7207 00
8236 5701 01
8236 5704 01
8236 5600 04
ICs
Description
ST, analog, regulator,
NJM78M05DLA
N/A
QFP, digital, gate array, ASPI
ST, digital, 74HCU04
QFP, digital, SCSI, M86604L
SOP, digital, SCSI, term,
BH9595FP-Y
ST, digital, VCO, TC9246F
Opt., photo coupler, PC900
ST, digital, 74HC14
ST, analog, reset, NJM2103M
ST, digital, driver, DTC114EK
QFP, digital, CPU, main,
FD-4, mask, SH7042, F28
N/A
ST, digital, driver, DTA114EK
ST, digital, 74HC32
N/A
ST, digital, 74HC157
TSOP, digital, Flash ROM,
M29F400T90, SGS
N/A
SOJ, digital, DRAM,
HM5118160AJ-7
N/A
ST, analog, op amp,
NJM2115M (TEI)
ST, digital, AD, AK5351
ST, digital, DA, AK4321
N/A
ST, analog, NJM4560M
N/A
ST, digital, driver, DTC114EK
ST, digital, driver, DTA114EK
ST, digital, 74HC04
DIODEs
Part No.
Description
8234 1050 00 VF, SCHOTTKY, EK13
N/A
8234 5028 00 ST, DAN202K
8234 7506 00 ST, RB400D
Ref. No.
R001, 002
R003, 004
R005~007
R008
R009
R010
R011
R012
R013
R014
R015
R016
R017
R018
R019
R020
R021~25
R026, 027
R028
R029
R030
R031
R032
R033
R034
R035
R036
R037, 038
R039
R040
R041
R042
R043, 044
R045~048
R049
R050
R051
R052
R053, 054
R061
R062~065
R066
R067
R068
R069
R070
R071
RESISTORs
Part No.
Description
8230 5001 01 ST, carbon, 1/10W, 100Ω, 5%
N/A
8230 5001 01 ST, carbon, 1/10W, 100Ω, 5%
8230 5001 03 ST, carbon, 1/10W, 10kΩ, 5%
8230 5005 62 ST, carbon, 1/10W, 5.6kΩ, 5%
8230 5003 32 ST, carbon, 1/10W, 3.3kΩ, 5%
8230 5002 22 ST, carbon, 1/10W, 2.2kΩ, 5%
8230 5001 01 ST, carbon, 1/10W, 100Ω, 5%
8230 5003 31 ST, carbon, 1/10W, 330Ω, 5%
8230 5001 05 ST, carbon, 1/10W, 1MΩ, 5%
8230 5000 00 ST, carbon, 1/10W, 0Ω, 5%
8230 5003 31 ST, carbon, 1/10W, 330Ω, 5%
8230 5001 05 ST, carbon, 1/10W, 1MΩ, 5%
8230 5000 00 ST, carbon, 1/10W, 0Ω, 5%
8230 5004 72 ST, carbon, 1/10W, 4.7kΩ, 5%
N/A
8230 5001 01 ST, carbon, 1/10W, 100Ω, 5%
8230 5000 00 ST, carbon, 1/10W, 0Ω, 5%
N/A
8230 5004 72 ST, carbon, 1/10W, 4.7kΩ, 5%
8230 5001 52 ST, carbon, 1/10W, 1.5kΩ, 5%
8230 5001 01 ST, carbon, 1/10W, 100Ω, 5%
8230 5002 24 ST, carbon, 1/10W, 220kΩ, 5%
N/A
8230 5003 31 ST, carbon, 1/10W, 330Ω, 5%
8230 5007 51 ST, carbon, 1/10W, 750Ω, 5%
8230 5001 04 ST, carbon, 1/10W, 100kΩ, 5%
8230 5007 51 ST, carbon, 1/10W, 750Ω, 5%
8230 5002 03 ST, carbon, 1/10W, 20kΩ, 5%
8230 5001 22 ST, carbon, 1/10W, 1.2kΩ, 5%
8230 5005 61 ST, carbon, 1/10W, 560Ω, 5%
8230 5001 22 ST, carbon, 1/10W, 1.2kΩ, 5%
8230 5001 01 ST, carbon, 1/10W, 100Ω, 5%
8230 5001 03 ST, carbon, 1/10W, 10kΩ, 5%
8230 5003 31 ST, carbon, 1/10W, 330Ω, 5%
8230 5001 02 ST, carbon, 1/10W, 1kΩ, 5%
8230 5001 03 ST, carbon, 1/10W, 10kΩ, 5%
8230 5001 01 ST, carbon, 1/10W, 100Ω, 5%
N/A
N/A
8230 5001 01 ST, carbon, 1/10W, 100Ω, 5%
8230 5001 52 ST, carbon, 1/10W, 1.5kΩ, 5%
N/A
8230 5003 31 ST, carbon, 1/10W, 330Ω, 5%
8230 5002 22 ST, carbon, 1/10W, 2.2kΩ, 5%
8230 5003 31 ST, carbon, 1/10W, 330Ω, 5%
8230 5001 03 ST, carbon, 1/10W, 10kΩ, 5%
31
FD-4
Ref. No.
R072
R073
R074~076
R077
R078
R079~082
R083~086
R087
R088~090
R091
R092~094
R095, 096
R097
R098, 099
R151
R152
R101, 201
R102, 202
R103, 203
R104, 204
R105, 205
R106, 206
R107, 207
R108, 208
R109, 209
R111~411
R511~811
R112~412
R512~812
R113~413
R513~813
R114~414
R514~814
R161, 261
R361, 461
R901
R902
R903
R904, 905
R906, 907
R908, 909
R910, 911
R912
R913
RESISTORs
Description
N/A
8230 5000 00 ST, carbon, 1/10W, 0Ω, 5%
8230 5002 21 ST, carbon, 1/10W, 220Ω, 5%
8230 5001 03 ST, carbon, 1/10W, 10kΩ, 5%
8230 5001 01 ST, carbon, 1/10W, 100Ω, 5%
8230 5001 03 ST, carbon, 1/10W, 10kΩ, 5%
N/A
8230 5001 03 ST, carbon, 1/10W, 10kΩ, 5%
N/A
8230 5001 03 ST, carbon, 1/10W, 10kΩ, 5%
N/A
8230 5001 02 ST, carbon, 1/10W, 1kΩ, 5%
8230 5001 05 ST, carbon, 1/10W, 1MΩ, 5%
N/A
8230 5001 00 ST, carbon, 1/10W, 10Ω, 5%
8230 5001 01 ST, carbon, 1/10W, 100Ω, 5%
8230 5002 03 ST, carbon, 1/10W, 20kΩ, 5%
8230 5001 23 ST, carbon, 1/10W, 12kΩ, 5%
8230 5001 03 ST, carbon, 1/10W, 10kΩ, 5%
8230 5001 03 ST, carbon, 1/10W, 10kΩ, 5%
8230 5003 31 ST, carbon, 1/10W, 330Ω, 5%
8230 5003 31 ST, carbon, 1/10W, 330Ω, 5%
N/A
N/A
8230 5001 04 ST, carbon, 1/10W, 100kΩ, 5%
8230 5001 03 ST, carbon, 1/10W, 10kΩ, 5%
N/A
8230 5001 03 ST, carbon, 1/10W, 10kΩ, 5%
N/A
8230 5002 72 ST, carbon, 1/10W, 2.7kΩ, 5%
N/A
8230 5001 04 ST, carbon, 1/10W, 100kΩ, 5%
N/A
8230 5001 00 ST, carbon, 1/10W, 10Ω, 5%
N/A
N/A
8230 5001 01 ST, carbon, 1/10W, 100Ω, 5%
8230 5002 21 ST, carbon, 1/10W, 220Ω, 5%
8230 5001 01 ST, carbon, 1/10W, 100Ω, 5%
8230 5001 03 ST, carbon, 1/10W, 10kΩ, 5%
8230 5001 02 ST, carbon, 1/10W, 1kΩ, 5%
N/A
8230 5001 03 ST, carbon, 1/10W, 10kΩ, 5%
N/A
Part No.
Ref. No.
C001
C002
C003
C004
C005~007
C008
C009, 010
C011
C012, 013
C014
C015
C016, 017
C018
C019
C020
C021
C022~025
C026
C027
C028
C029
C030
C031, 032
C033, 034
C035, 036
C037~040
32
CAPACITORs
ALU = Electrolytic type
CER = Ceramic type
Part No.
Description
N/A
8233 5021 04 ST, CER, 50V, 0.1µF, +80,
CC20F
8232 1431 06 VT, ALU, 16V, 10µF, 20%,
SME-VB
8233 5021 04 ST, CER, 50V, 0.1µF, +80,
CC20F
N/A
8233 5021 04 ST, CER, 50V, 0.1µF, +80,
CC20F
8232 1431 06 VT, ALU, 16V, 10µF, 20%,
SME-VB
8233 5021 04 ST, CER, 50V, 0.1µF, +80,
CC20F
N/A
8232 1431 06 VT, ALU, 16V, 10µF, 20%,
SME-VB
8233 5021 04 ST, CER, 50V, 0.1µF, +80,
CC20F
N/A
8233 5021 04 ST, CER, 50V, 0.1µF, +80,
CC20F
N/A
8233 5041 03 ST, CER, 25V, 0.01µF, 10%,
CC20R
8232 1431 06 VT, ALU, 16V, 10µF, 20%,
SME-VB
8233 5041 03 ST, CER, 25V, 0.01µF, 10%,
CC20R
8232 1431 06 VT, ALU, 16V, 10µF, 20%,
SME-VB
8233 5004 71 ST, CER, 50V, 470pF, 5%,
CC20SL
8233 5001 01 ST, CER, 50V, 100pF, 5%,
CC20SL
N/A
8233 5004 71 ST, CER, 50V, 470pF, 5%,
CC20SL
8233 5002 20 ST, CER, 50V, 22pF, 5%,
CC20SL
8233 5041 03 ST, CER, 25V, 0.01µF, 10%,
CC20R
8233 5002 20 ST, CER, 50V, 22pF, 5%,
CC20SL
8233 5041 03 ST, CER, 25V, 0.01µF, 10%,
CC20R
FD-4
Ref. No.
C041~045
C046
Part No.
C047
8233 5021 04
C048
8232 1431 06
C049~051
8233 5041 03
C052
8232 1431 06
8233 5001 50
C053~056
C057
8233 5041 03
C058
8233 5094 74
C059
8232 1431 06
C060
8233 5021 04
C061, 062
8233 5041 03
C063
8232 1431 06
C064
8233 5002 21
C065
8233 5044 73
C066
8233 5041 03
C067
8233 5001 21
C068~070
8233 5021 04
C071
8233 5041 03
C072
8232 1461 05
C073
8233 5041 03
C074, 075
8233 5003 30
C076
8233 5041 03
C077
8233 5001 01
C078
8233 5004 71
C079~087
Description
N/A
VT, ALU, 16V, 10µF, 20%,
SME-VB
ST, CER, 50V, 0.1µF, +80,
CC20F
VT, ALU, 16V, 10µF, 20%,
SME-VB
ST, CER, 25V, 0.01µF, 10%,
CC20R
ST, CER, 50V, 15pF, 5%,
CC20SL
N/A
ST, CER, 25V, 0.01µF, 10%,
CC20R
ST, CER, 25V, 0.47µF, 20%,
KC30E
VT, ALU, 16V, 10µF, 20%,
SME-VB
ST, CER, 50V, 0.1µF, +80,
CC20F
ST, CER, 25V, 0.01µF, 10%,
CC20R
VT, ALU, 16V, 10µF, 20%,
SME-VB
ST, CER, 50V, 220pF, 5%,
CC20SL
ST, CER, 25V, 0.047µF,
10%, CC20R
ST, CER, 25V, 0.01µF, 10%,
CC20R
ST, CER, 50V, 120pF, 5%,
CC20SL
ST, CER, 50V, 0.1µF, +80,
CC20F
ST, CER, 25V, 0.01µF, 10%,
CC20R
VT, ALU, 50V, 1µF, 20%,
SME-VB
ST, CER, 25V, 0.01µF, 10%,
CC20R
ST, CER, 50V, 33pF, 5%,
CC20SL
ST, CER, 25V, 0.01µF, 10%,
CC20R
ST, CER, 50V, 100pF, 5%,
CC20SL
ST, CER, 50V, 470pF, 5%,
CC20SL
N/A
Ref. No.
C088
C089, 090
C091
C092
C093, 094
C095
C096~100
C101~104
C151
C152
C153
C154
C155
C156
C157
C158, 159
C101, 201
C102, 202
C103, 203
C104, 204
C105, 205
C106, 206
C107, 207
C108, 208
C111~411
C511~811
C112~412
C512~812
C113, 213
C313, 413
C114, 214
Part No.
Description
8233 5021 04 ST, CER, 50V, 0.1µF, +80,
CC20F
N/A
8232 1431 06 VT, ALU, 16V, 10µF, 20%,
SME-VB
N/A
8233 5041 03 ST, CER, 25V, 0.01µF, 10%,
CC20R
8233 5001 01 ST, CER, 50V, 100pF, 5%,
CC20SL
8233 5041 03 ST, CER, 25V, 0.01µF, 10%,
CC20R
N/A
N/A
8233 5041 03 ST, CER, 25V, 0.01µF, 10%,
CC20R
8232 1431 06 VT, ALU, 16V, 10µF, 20%,
SME-VB
8233 5041 03 ST, CER, 25V, 0.01µF, 10%,
CC20R
8233 5021 04 ST, CER, 50V, 0.1µF, +80,
CC20F
8232 1431 06 VT, ALU, 16V, 10µF, 20%,
SME-VB
8233 5041 03 ST, CER, 25V, 0.01µF, 10%,
CC20R
N/A
8232 1431 06 VT, ALU, 16V, 10µF, 20%,
SME-VB
8233 5001 52 ST, CER, 50V, 0.0015µF,
5%, CC20R
8233 5041 03 ST, CER, 25V, 0.01µF, 10%,
CC20R
8233 5041 03 ST, CER, 25V, 0.01µF, 10%,
CC20R
8276 0020 02 Wire, jumper, IPS-1041-2, F5
8276 0020 02 Wire, jumper, IPS-1041-2, F5
N/A
N/A
8232 1431 06 VT, ALU, 16V, 10µF, 20%,
SME-VB
N/A
8233 5006 81 ST, CER, 50V, 680pF, 5%,
CC20SL
N/A
8233 5041 03 ST, CER, 25V, 0.01µF, 10%,
CC20R
N/A
8233 5041 03 ST, CER, 25V, 0.01µF, 10%,
CC20R
33
FD-4
Ref. No.
C314, 414
C115~815
C116~416
C516~816
C161~461
C162, 262
C362, 462
C163, 263
34
Part No.
8232 1434 76
8233 5041 03
8232 1434 76
C363, 463
C164, 264
8233 5041 03
C364, 464
C165, 265
C166, 266
8232 1431 06
Description
N/A
N/A
VT, ALU, 16V, 47µF, 20%,
SME-VB
N/A
N/A
ST, CER, 25V, 0.01µF, 10%,
CC20R
N/A
VT, ALU, 16V, 47µF, 20%,
SME-VB
N/A
ST, CER, 25V, 0.01µF, 10%,
CC20R
N/A
N/A
VT, ALU, 16V, 10µF, 20%,
SME-VB
N/A
ST, CER, 25V, 0.01µF, 10%,
CC20R
N/A
N/A
ST, CER, 25V, 0.01µF, 10%,
CC20R
VT, ALU, 16V, 10µF, 20%,
SME-VB
ST, CER, 25V, 0.01µF, 10%,
CC20R
ST, CER, 50V, 0.1µF, +80,
CC20F
N/A
ST, CER, 25V, 0.01µF, 10%,
CC20R
N/A
Resistor, ST, carbon, 1/10W,
0Ω, 5%
ST, CER, 50V, 33pF, 5%,
CC20SL
VT, ALU, 25V, 100µF, 20%,
SME-VB
C366, 466
C167, 267
8233 5041 03
C367, 467
C901, 902
C903
8233 5041 03
C904
8232 1431 06
C905
8233 5041 03
C906
8233 5021 04
C907, 908
C909
8233 5041 03
C910
C911
8230 5000 00
C912
8233 5003 30
C913
8232 1441 07
Ref. No.
E1401
E1402
J001, 002
J003
MISCELLANEOUS
Part No.
Description
8245 1580 11 Connector, PI, socket, IC, 32P
N/A
N/A
8245 1711 09 Connector, PI, jack, 8283, 9P,
WHT
Ref. No.
J004
J005
J006
J007
J008
J009
J010
J011, 012
J101, 201
L001~003
L004
L005
L006
L007, 008
L009
L010, 011
L012
L013, 014
L015, 016
L017~021
L022
L101~201
L102~402
L502~802
L103~403
L503~803
S001
X001
X002
X003
X004
Part No.
Description
8245 3170 00 Connector, opt., TX178
8245 3180 00 Connector, opt., RX178
8245 3120 05 Connector, PL, jack, D-SUB,
25P, 70057-025, EMIFIL
WHT
8245 2980 00 Connector, PL, jack, phone,
LGR4609-7000
8245 4200 00 Connector, jack, DIN5P,
YKF51-5053
WHT
N/A
8245 2850 00 Connector, PL, jack, RCA,
1P, YKB11-0923, W/S
8276 9130 00 Wire, jumper, isolation,
1/4 type
8242 1962 23 Coil, PVT, 22µH, LF5.0S
N/A
8242 1962 23 Coil, PVT, 22µH, LF5.0S
8242 1860 13 Filter, T, EMI,
LFW7B-M3R2T
N/A
8242 1860 13 Filter, T, EMI,
LFW7B-M3R2T
N/A
8242 1860 13 Filter, T, EMI,
LFW7B-M3R2T
N/A
8242 1860 13 Filter, T, EMI,
LFW7B-M3R2T
N/A
8242 1860 13 Filter, T, EMI,
LFW7B-M3R2T
8242 1860 13 Filter, T, EMI,
LFW7B-M3R2T
N/A
8242 1860 13 Filter, T, EMI,
LFW7B-M3R2T
N/A
8253 4570 02 Switch, slide, 1-2, nonshortening, SSSS91
8256 1700 01 Resonator, ST, XTL, 22.579
MHZ, FUP-FBB3AFUJICOM
8256 1700 03 Resonator, ST, XTL,
16.384MHz, FUP-FBB3A
8256 1790 01 Resonator, PT, CER,
7.000MHz, F5, EFOEN
N/A
FD-4
Ref. No.
Part No.
Y3301
8216 5950 00
Y3302
W001, 002
W003
8276 7320 30
Description
Shield, RCA
N/A
N/A
Cable assy, 8P, 8263WHT5395, #22, L300
W004~008
N/A
W101, 201
N/A
W102, 202 8230 5000 00 Resistor, ST, carbon, 1/10W,
0Ω, 5%
• MIXER A PCB assy
Ref. No.
B001
Part No.
Description
8274 1220 00 PCB Assy, Mixer A, FD-4
8251 9672 01 Plain PCB, Mixer A, FD-4
Ref. No.
U001, 002
U003, 004
U005
U006
U301
U302
U401
U302, 402
U503~803
U510~810
Part No.
8236 0366 00
8236 0342 02
8236 0366 00
8236 0352 03
8236 0342 02
8236 0342 02
8236 0366 00
8236 0342 02
8236 0342 02
8236 0781 07
Ref. No.
R001, 002
R010
R011~013
R150, 250
R151, 251
R152, 252
R153, 253
R155, 255
R156, 256
R157, 257
R158, 258
R160, 260
R161, 261
R162, 262
R163, 263
ICs
Description
SIP, analog, NJM2068LD
SIP, analog, NJM4558L
SIP, analog, NJM4556AL
PT, digital, driver, DTC143TS
RESISTORs
Part No.
Description
8230 1504 79 VT, carbon, 1/2W, 4.7Ω, 5%
8240 2540 00 Pot, PI, SL45, 50kΩAA,
NS-4502GVP, L20
8240 2530 00 Pot, PI, RT12, 30kΩAA,
EVJY00, L20
8230 1388 23 HT, carbon, 1/4W, 82kΩ, 5%
8230 1382 03 HT, carbon, 1/4W, 20kΩ, 5%
8230 1384 73 HT, carbon, 1/4W, 47kΩ, 5%
8230 1381 04 HT, carbon, 1/4W, 100kΩ, 5%
8230 1388 23 HT, carbon, 1/4W, 82kΩ, 5%
8230 1381 03 HT, carbon, 1/4W, 10kΩ, 5%
8230 1381 03 HT, carbon, 1/4W, 10kΩ, 5%
8230 1381 03 HT, carbon, 1/4W, 10kΩ, 5%
8230 1388 23 HT, carbon, 1/4W, 82kΩ, 5%
8230 1381 04 HT, carbon, 1/4W, 100kΩ, 5%
8230 1388 23 HT, carbon, 1/4W, 82kΩ, 5%
8230 1382 03 HT, carbon, 1/4W, 20kΩ, 5%
Ref. No.
R164, 264
R165, 265
R166, 266
R167, 267
R168, 268
R170, 270
R171, 271
R172, 272
R173, 273
R501, 601
R502, 602
R503, 603
R504, 604
R701, 801
R702, 802
R703, 803
R704, 804
R705, 805
R706, 806
R707, 807
R708, 808
R709, 809
R710, 810
R711, 811
R512~812
R513~813
R514~814
R515~815
R516~816
R517~817
R518~818
R519~819
R520~820
R521~821
R522~822
R523~823
R524~824
R525~825
R526~826
R527~827
R528~828
R529~829
R530~830
R531~831
R532~832
R533~833
R534~834
R535~835
R536~836
Part No.
8230 1382 04
8230 1381 03
8230 1381 03
8230 1382 00
8230 1381 01
8230 1381 01
8230 1382 73
8230 1382 73
8230 1381 04
8230 1381 01
8230 1381 04
8230 1381 01
8230 1381 04
8230 1381 04
8230 1382 04
8230 1382 04
8230 1382 03
8230 1382 03
8230 1382 02
8230 1382 02
8230 1382 04
8230 1382 04
8230 1381 01
8230 1382 02
8230 1382 04
8230 1389 12
8230 1381 03
8230 1381 03
8230 1381 03
8230 1382 02
8230 1382 02
8230 1381 32
8230 1381 32
8230 1389 12
8230 1389 12
8230 1382 73
8230 1382 73
8230 1383 63
8230 1383 63
8230 1382 73
8230 1383 63
8230 1383 63
8230 1382 73
8230 1382 73
8230 1383 63
8230 1383 63
8230 1382 20
Description
HT, carbon, 1/4W, 200kΩ, 5%
HT, carbon, 1/4W, 20Ω, 5%
N/A
HT, carbon, 1/4W, 100Ω, 5%
HT, carbon, 1/4W, 100Ω, 5%
HT, carbon, 1/4W, 100Ω, 5%
HT, carbon, 1/4W, 100Ω, 5%
HT, carbon, 1/4W, 100Ω, 5%
HT, carbon, 1/4W, 9.1kΩ, 5%
N/A
HT, carbon, 1/4W, 22Ω, 5%
35
FD-4
Ref. No.
R537~837
R540~840
R541~841
R542~842
R543~843
R544~844
R545~845
R546~846
R547~847
R548~848
Ref. No.
C001, 002
C003~006
C007, 008
C009
C140, 240
C141, 241
C142, 242
C143, 243
C144, 244
C145, 245
C146, 246
C150, 250
C151, 251
C152, 252
C153, 253
C154, 254
C155, 255
36
Part No.
Description
8230 1382 20 HT, carbon, 1/4W, 22Ω, 5%
8240 2500 00 Pot., PI, SL45, 50kΩA,
NS-4502VP, L20
8240 2680 00 Pot., PI, RT09, 10kΩB, CC,
EVUF3A, L20
8240 2700 00 Pot., PI, RT12, 50kΩCC,
EVJY00, L20
8240 2510 00 Pot., PI, RT09, 50kΩB, CC,
EVUF3A, L20
8240 2510 00 Pot., PI, RT09, 50kΩB, CC,
EVUF3A, L20
8240 2510 00 Pot., PI, RT09, 50kΩB, CC,
EVUF3A, L20
8240 2510 00 Pot., PI, RT09, 50kΩB, CC,
EVUF3A, L20
8240 2490 00 Pot., PI, RT12, 100kΩB,
CC CT, EVJ02J, L20
8240 2830 00 Pot., PI, RT12, 20kΩB,
CC CT, EVJ02J, L20
CAPACITORs
CER = Ceramic type
PES=Mylar type
Part No.
Description
8232 1431 07 VT, ALU, 16V, 100µF, 20%,
SME-VB
8232 8181 04 VT, CER, 25V, 0.1µF, +80, YF
8232 1432 27 VT, ALU, 16V, 220µF, 20%,
SME-VB
8232 8181 04 VT, CER, 25V, 0.1µF, +80, YF
8232 1424 76 VT, ALU, 10V, 47µF, 20%,
SME-VB
8232 8011 00 VT, CER, 50V, 10pF, 5%, SL
8232 8011 00 VT, CER, 50V, 10pF, 5%, SL
8232 1431 06 VT, ALU, 16V, 10µF, 20%,
SME-VB
8232 8011 00 VT, CER, 50V, 10pF, 5%, SL
8232 8012 20 VT, CER, 50V, 22pF, 5%, SL
8232 1424 76 VT, ALU, 10V, 47µF, 20%,
SME-VB
8232 1424 76 VT, ALU, 10V, 47µF, 20%,
SME-VB
8232 8011 00 VT, CER, 50V, 10pF, 5%, SL
8232 8011 00 VT, CER, 50V, 10pF, 5%, SL
8232 8011 01 VT, CER, 50V, 100pF, 5%, SL
8232 8011 01 VT, CER, 50V, 100pF, 5%, SL
8232 1431 06 VT, ALU, 16V, 10µF, 20%,
SME-VB
Ref. No.
C160, 260
C161, 261
C162, 262
C163, 263
C164, 264
C165, 265
C166, 266
C167, 267
C170, 270
C171, 271
C172, 272
C172, 273
C501, 601
C502, 602
C503, 603
C504, 604
C510~810
C511~811
C512~812
C513~813
C514~814
C515~815
C516~816
C517~817
C518~818
C519~819
C520~820
C521~821
C522~822
C530, 730
C531, 731
C532, 732
C533, 733
C534~834
Part No.
Description
8232 1424 76 VT, ALU, 10V, 47µF, 20%,
SME-VB
8232 8011 00 VT, CER, 50V, 10pF, 5%, SL
8232 8011 00 VT, CER, 50V, 10pF, 5%, SL
8232 1424 76 VT, ALU, 10V, 47µF, 20%,
SME-VB
8232 8011 00 VT, CER, 50V, 10pF, 5%, SL
8232 8011 00 VT, CER, 50V, 10pF, 5%, SL
8232 1431 06 VT, ALU, 16V, 10µF, 20%,
SME-VB
8232 1422 27 VT, ALU, 10V, 220µF, 20%,
SME-VB
8232 1424 76 VT, ALU, 10V, 47µF, 20%,
SME-VB
8232 1424 76 VT, ALU, 10V, 47µF, 20%,
SME-VB
8232 8014 71 VT, CER, 50V, 470pF, 5%, SL
8232 8014 71 VT, CER, 50V, 470pF, 5%, SL
8232 8011 01 VT, CER, 50V, 100pF, 5%, SL
8232 1431 06 VT, ALU, 16V, 10µF, 20%,
SME-VB
8232 8011 01 VT, CER, 50V, 100pF, 5%, SL
8232 1424 76 VT, ALU, 10V, 47µF, 20%,
SME-VB
8232 1424 76 VT, ALU, 10V, 47µF, 20%,
SME-VB
8232 8011 01 VT, CER, 50V, 100pF, 5%, SL
8232 8011 01 VT, CER, 50V, 100pF, 5%, SL
8232 9012 23 VT, PES, 50V, 0.022µF, 5%,
AMZ
8232 9011 03 VT, PES, 50V, 0.01µF, 5%,
AMZ
8232 8011 01 VT, CER, 50V, 100pF, 5%, SL
8232 8011 01 VT, CER, 50V, 100pF, 5%, SL
8232 9016 82 VT, PES, 50V, 0.0068µF, 5%,
AMZ
8232 9016 82 VT, PES, 50V, 0.0068µF, 5%,
AMZ
8232 9011 53 VT, PES, 50V, 0.015µF, 5%,
AMZ
8232 8012 20 VT, CER, 50V, 22pF, 5%, SL
8232 8012 20 VT, CER, 50V, 22pF, 5%, SL
8232 1424 76 VT, ALU, 10V, 47µF, 20%,
SME-VB
8232 8181 04 VT, CER, 25V, 0.1µF, +80, YF
8232 8181 04 VT, CER, 25V, 0.1µF, +80, YF
8232 8181 04 VT, CER, 25V, 0.1µF, +80, YF
8232 8181 04 VT, CER, 25V, 0.1µF, +80, YF
8232 8181 04 VT, CER, 25V, 0.1µF, +80, YF
FD-4
Ref. No.
C535~835
C701, 801
C702, 802
C703, 803
Part No.
8232 8181 04
8232 8011 01
8232 8011 01
8232 1421 07
C704, 804
8232 1421 07
C705, 805
C706, 806
C707, 807
C708, 808
8232 8011 00
8232 8011 00
8232 1424 76
Description
VT, CER, 25V, 0.1µF, +80, YF
VT, CER, 50V, 100pF, 5%, SL
VT, CER, 50V, 100pF, 5%, SL
VT, ALU, 10V, 100µF, 20%,
SME-VB
VT, ALU, 10V, 100µF, 20%,
SME-VB
VT, CER, 50V, 10pF, 5%, SL
VT, CER, 50V, 10pF, 5%, SL
N/A
VT, ALU, 10V, 47µF, 20%,
SME-VB
• JACK PCB assy
Ref. No.
B001
Ref. No.
Q001~006
R001~006
R007~012
J010
Ref. No.
E601
E602
E603
J001
J021
J022
J023
J501~801
S001
S701, 801
S502~802
W001
W002
W010
W011
W012
MISCELLANEOUS
Part No.
Description
Wire, jumper, F5
Wire, jumper, F10
Wire, jumper, F15
LGR4609-7000
WHT
WHT
RED
LGR4609-7000
8253 6550 16 SW, PI, slide, 4-3,
non-shortening, SSSF0, L09
8253 6550 13 Switch, PI, slide, 2-3,
8253 6550 13 Switch, PI, slide, 2-3,
8276 7770 20 Cable assy, 7P,
WHTMT/F-MT/BS, L200
8276 7790 30 Cable assy, 9P,
WHTMT/F-MT/BS, L300
8276 7780 20 Cable assy, 8P,
WHTMT/F-MT/BS, L200
8276 7790 20 Cable assy, 9P,
WHTMT/F-MT/BS, L200
8277 4530 40 Cable assy, shiled 2C, 6P,
WHT8283-9073, L400
J011
J031, 032
J033~040
L001~006
E101
E102
E103
E104
Part No.
Description
8274 1230 00 PCB Assy, JACK, FD-4
8251 9672 02 Plain PCB, JACK, FD-4
Part No.
Description
8234 1434 03 Transistor, VT, NPN,
2SC2878A/B
8230 1381 02 Resistor, HT, carbon, 1/4W,
1kΩ, 5%
8230 1381 03 Resistor, HT, carbon, 1/4W,
10kΩ, 5%
8245 1711 08 Connector, PI, jack, 8P, 8283,
WHT
8245 1711 09 Connector, PI, jack, 9P, 8283,
WHT
8245 2620 01 Connector, PL, jack, RCA,
2P, BLK
LGR4609-7000
N/A
Wire, jumper, F5
Wire, jumper, F7.5
Wire, jumper, F10
Wire, jumper, F12.5
• XLR PCB assy
Ref. No.
B001
Ref. No.
J001, 002
J003
Part No.
Description
8274 1240 00 PCB Assy, XLR, FD-4
8251 9672 03 Plain PCB, XLR, FD-4
Part No.
Description
8245 2680 03 Connector, PL, XLR 31,
3P, NC3FAH20
8245 1721 06 Connector, PL, jack, 8283,
6P, WHT
37
FD-4
• DISPLAY PCB assy
Ref. No.
B001
Ref. No.
U001
U002
U003
U004
U005
U006
ICs
Part No.
Description
8236 0835 01 QFP, digital, CPU,
FD4-display
N/A
8236 0836 00 QFP, digital, LCD driver,
HD44780U
8256 1760 00 Module, display, LCD, FD-4
N/A
8256 1770 00 Module, jog, SIM-026MT
Ref. No.
Q001, 002
TRANSISTORs
Part No.
Description
8234 1008 02 VT, PNP, 2SA1150Y
Ref. No.
D001~008
D007, 008
D009~014
D015, 016
D017, 018
D019, 020
D021~036
D037~040
D041~046
D047, 048
D049
D050, 051
D052
D053, 054
D055, 056
DIODEs
Part No.
Description
8234 5007 00 HT, 1SS136
N/A
8234 5007 00 HT, 1SS136
N/A
8234 5007 00 HT, 1SS136
N/A
8234 5007 00 HT, 1SS136
N/A
8234 0100 00 Opt., V, LED, ORG, GL-2HD6
N/A
8234 0100 00 Opt., V, LED, ORG, GL-2HD6
8234 0191 00 Opt., V, LED, GRN, GL-2EG6
N/A
8234 0191 00 Opt., V, LED, GRN, GL-2EG6
N/A
Ref. No.
R001
R002~007
R008
R009
R010
R011~015
R016
R017
38
Part No.
Description
8274 1360 00 PCB Assy, Display, FD-4
8251 5181 00 Plain PCB, Display, FD-4
RESISTORs
Description
Wire, jumper, F10
8230 1381 01 HT, carbon, 1/4W, 100Ω, 5%
8230 1381 05 HT, carbon, 1/4W, 1MΩ, 5%
8230 1382 04 HT, carbon, 1/4W, 200kΩ, 5%
Wire, jumper, F5
8230 1381 02 HT, carbon, 1/4W, 1kΩ, 5%
8240 1510 04 Pot., PI, RT09, 5kΩB, L20,
∅4 knob, RK09K113
8230 1381 04 HT, carbon, 1/4W, 100kΩ, 5%
Part No.
Ref. No.
R018~019
R020
R021, 022
R023~030
R031~036
R037, 038
R039, 040
R041~043
Ref. No.
C001
C002
C003
C004
C005, 006
C007~009
C010, 011
C012
C013
C014
C015, 016
Ref. No.
E101
E501
E502
E503
E504
E505
E506
L001, 002
S001~006
S007, 008
S009~014
S015, 016
S017, 018
S019, 020
S021~036
S037~040
W001
W002
Part No.
8230 1381 03
8230 1381 04
8230 1381 03
8230 1382 23
8230 1381 11
Description
HT, carbon, 1/4W, 110Ω, 5%
N/A
8230 1381 02 HT, carbon, 1/4W, 1kΩ, 5%
8230 1388 23 HT, carbon, 1/4W, 82kΩ, 5%
CAPACITORs
CER = Ceramic type
Part No.
Description
8232 1431 06 VT, ALU, 16V, 10µF, 20%,
SME-VB
8232 8181 04 VT, CER, 25V, 0.1µF, +80, YF
8232 1451 06 VT, ALU, 35V, 10µF, 20%,
SME-VB
8232 8181 04 VT, CER, 25V, 0.1µF, +80, YF
N/A
8232 8014 71 VT, CER, 50V, 470pF, 5%, SL
8232 8063 30 VT, CER, 50V, 33pF, 5%, NPO
8232 8181 04 VT, CER, 25V, 0.1µF, +80, YF
N/A
8232 8181 04 VT, CER, 25V, 0.1µF, +80, YF
8232 8031 03 VT, CER, 50V, 0.01µF, +80,
YF
MISCELLANEOUS
Part No.
Description
N/A
Wire, jumper, F5
Wire, jumper, F7.5
Wire, jumper, F10
Wire, jumper, F12.5
Wire, jumper, F20
Wire, jumper, F30
8239 1160 00 Lamp, 5V, 75mA
8253 1350 02 SW, PT, tact, SOR-112HS
N/A
8253 1350 02 SW, PT, tact, SOR-112HS
N/A
8253 1350 02 SW, PT, tact, SOR-112HS
N/A
8253 1350 02 SW, PT, tact, SOR-112HS
N/A
8276 7790 55 Cable assy, 9P,
WHTMT/F-MT/BS, L550
N/A
FD-4
Ref. No.
W003
X001
Y1001
Y1002
Y1003
Y1004
Y1005
Y1006
Y1007
Y1008
Part No.
8256 1340 03
8207 0100 10
8207 0100 11
8207 0100 13
8207 0100 14
8212 6110 00
8207 0100 09
8207 0100 12
Description
N/A
Resonator, PF, CER,
8.00MHz, F5, EFOEN
Spacer, LED, 10
Spacer, LED, 11
Spacer, LED, 13
Spacer, LED, 14
N/A
Plate, reflect, LCD, FD-4
Spacer, LED, 9
Spacer, LED, 12
B001
Part No.
Description
8274 1380 00 PCB Assy, Power Supply,
FD-4
8251 9691 01 Plain PCB, Power Supply,
FD-4
Ref. No.
U001
U002
Part No.
8236 5410 03
8234 1081 00
U003
8236 0321 05
U004
U005
Ref. No.
D001
D002
D003
D004
D005, 006
Ref. No.
R001
R002, 003
R004
R005
8236 0348 05
8236 5409 00
Ref. No.
C001
C002
C003
C004
C005, 006
• POWER PCB assy
Ref. No.
Ref. No.
R006
R007
R008, 009
ICs
Description
V, analog, power, MIP163
Opt., H, photo coupler,
ON3171
220, analog, regulator,
7812FA
220, analog, regulator,
NJM7912FA
VT, analog, regulator,
AN1431T
DIODEs
Part No.
Description
8234 1077 00 Stack, 600VAC, 1.5A,
D2SBA60
8234 1079 00 HT, 80V, 0.2A, MA171
8234 1078 00 HT, 600V, 1.0A, D1N60
8234 1080 00 V, 200V, 5.0A, MA649
8234 1084 00 VT, SCHOTTKY, EK03W
RESISTORs
Part No.
Description
8230 1251 04 H, metal, 2W, 100kΩ, 5%,
RSS
8230 1386 29 HT, carbon, 1/4W, 6.2Ω, 5%
8230 1243 30 HT, metal, 1/2W, 33Ω, 5%,
RSS
8230 1387 50 HT, carbon, 1/4W, 75Ω, 5%
C007
C008
C009~012
C013
C014
C015, 016
C017~020
C023~026
Part No.
8230 1381 03
8230 1384 71
8230 1381 03
Description
HT, carbon, 1/4W, 470Ω, 5%
CAPACITORs
CER = Ceramic type
PES=Mylar type
Part No.
Description
N/A
8232 3491 03 VT, PES, 630V, 0.01µF, 10%,
ECQ-EKF
8232 8011 00 VT, CER, 50V, 10pF, 5%, SL
8232 8181 04 VT, CER, 25V, 0.1µF, +80, YF
8232 3542 22 VT, CER, 250V, 0.0022µF,
20%, ECK-ZNS
8232 3533 91 VT, CER, 500V, 390pF, 10%,
ECK-ZHT
8232 8181 04 VT, CER, 25V, 0.1µF, +80, YF
8232 8031 03 VT, CER, 50V, 0.01µF, +80,
YF
8232 3241 07 VT, ALU, 400V, 100µF, 20%,
SMH-VNSN, D25.4
8232 0964 76 V, ALU, 25V, 47µF, 20%,
SME-VB
8232 3584 77 VT, ALU, 25V, 470µF, , 20%,
LXV, D10
8232 3583 37 VT, ALU, 25V, 330µF, , 20%,
LXV, D10
N/A
MISCELLANEOUS
Part No.
Description
WHT
L001
N/A
L002
8242 2501 03 Coil, PVT, 10µH, 2A, ELC
L003
8242 2491 93 Filter, line, 19mH, 0.5A,
ELF15N005
T001
8242 2480 00 Transformer, sw power,
27SF11, FD-4
W001~006
N/A
W007
8277 4711 10 Cable assy, 250RECEPSIN1.8, BRN, L100
W008
N/A
Y501
N/A
Y502
8207 0015 00 Heat sink, 16PB16, L25, B
Y503
Screw, P3 x 6, CZn
Ref. No.
J001
39
FD-4
• AC IN PCB assy
Ref. No.
B101
Part No.
Description
8274 1390 00 PCB Assy, AC In, FD-4
8251 9691 02 Plain PCB, AC In, FD-4
Ref. No.
C001
Part No.
Description
8232 3521 04 Capacitor, V, PES, 250VAC,
0.1µF, 20%, ECQ-UMV
C021, 022 8232 3542 22 Capacitor, V, CER, 250V,
0.0022µF, 20%, ECK-ZNS
E101
8239 0002 00 Holder, PI, fuse, S-N5057
L001
8242 2491 02 Filter, line, 1mH, 2.2A,
ELF15N022
W001, 002 8245 5430 00 Terminal, IPS-5007
W003
8277 4711 10 Cable assy, 250RECEPSIN1.8, BRN, L100
W004
8277 4722 10 Cable assy, 1P,
SIN1.8-SIN1.8, WHT, L100
Abbreviation
T:
F:
Taping device
Forming device
P:
V:
Penetrate mount
Vertical mount
H:
I:
Horizontal mount
I form
L:
L form
QFP: Quad Flat Package
SOP: Small Outline Package
SIP: Single In-line Package
SOJ: Small Outline with J leads
220: TO-220 type
40
AUX RTN2
AUX RTN1
R
L/MONO
-20dBV
INPUT4
INPUT3
BAL
UNBAL
INPUT3
-50~-10dBV
INPUT2
INPUT1
INPUT1
-10dBV
BLOCK DIAGRAM
TRIM
AUX RTN
INPUT SEL
INPUT
OFF
TRK3
INPUT SEL
INPUT
OFF
TRK1
INPUT
INSERT3
INPUT
MON
TRK1
TRK3
MON
INPUT
FADER
INPUT
FADER
LO
GAIN
LO
GAIN
MID
GAIN
SHIFT
EQ
MID
GAIN
SHIFT
EQ
HI
GAIN
HI
GAIN
MON R
MON L
AUX2
AUX1
R
L
MON R
MON L
AUX2
AUX1
R
L
R
L
TRK4
REC MUTE4
TRK3
REC MUTE3
PAN
L
R
TRK2
REC MUTE2
TRK1
REC MUTE1
PAN
DATA IN
ADC
ADC
MASTER
L
R
DG IN SETUP
R
L
4
3
2
RECORD TRACK
1
R
L
TRK.R
TRK.L
TRK.4
TRK.3
TRK.2
TRK.1
HARD DISK
MON SEL
ST
ST+MON
MON
MON
R
L
DATA OUT
DG OUT SETUP
DAC
DAC
DAC
DAC
L
L
R
MON OUT
PHONES
2
1/3/L
2/4/R
RECORDER IN
AUX SEND
1
R
STEREO OUT
FD-4
8. CIRCUIT DIAGRAMS
41
FD-4
42
MIXER A (1/6)
W2
REPRO
/REC MUTE5-8
1
2
3
4
5
6
7
8
9
REPRO5
REPRO6
REPRO7
REPRO8
R.MUTE5
R.MUTE6
R.MUTE7
R.MUTE8
AGND
INPUT5
REPRO5
GROUP
STEREO L
STEREO R
STEREO L
STEREO R
REC L
REC R
J10
OUTPUT
REC MUTE5
+12V
AGND
-12V
AUX1
AUX2
AUX1
AUX2
MON L
MON R
MON L
MON R
STEREO OUT L
STEREO OUT R
MONITOR OUT L
MONITOR OUT R
AUX1 SEND
AUX2 SEND
INPUT6
REPRO6
STEREO L
STEREO R
REC MUTE6
AUX RTN 1L
AUX RTN 1R
AUX RTN 2L
AUX RTN 2R
AUX1
AUX2
+12V
AGND
-12V
MON L
MON R
W12
INPUTBAL
1
2
3
4
5
6
AGND
INPUT7H
INPUT7C
AGND
INPUT8H
INPUT8C
INPUT7H
INPUT7C
INPUT8H
INPUT8C
INSERT8 SEND
INSERT8 RTN
+12V
AGND
-12V
1
2
3
AUX1
AUX2
AGND
J23
POWER
1
2
3
+12V
AGND
-12V
J11
AUXRTN
INSERT
AUX1
AUX2
MON L
MON R
W1
POWER
C1
100/16
STEREO L
STEREO R
REPRO8
REC MUTE8
J22
AUXBUSS
1
2
3
4
5
6
7
8
9
STEREO L
STEREO R
INPUT8
STEREO L
STEREO R
MON L
MON R
AGND
AUX RTN 1L
AUX RTN 1R
AUX RTN 2L
AUX RTN 2R
INSERT7 SEND
INSERT7 RTN
INSERT8 SEND
INSERT8 RTN
AGND
REPRO7
REC MUTE7
+12V
AGND
-12V
1
2
3
4
5
1
2
3
4
5
6
7
8
INPUT7
INSERT7 SEND
INSERT7 RTN
J21
ST/MON BUSS
+12V
AGND
-12V
HPGND
STEREO OUT L
STEREO OUT R
MONITOR OUT L
MONITOR OUT R
AUX1 SEND
AUX2 SEND
MUTE
AGND
AUX1
AUX2
MON L
MON R
C2
100/16
MUTE
REC L
REC R
1
2
3
4
5
6
7
MIXER A (2/6)
C152
10P
R155
C5
0.1
120K
C142
10P
C154
100P
R150
+12V
R157
C150
47/10
R156
10K
AUX1
C151
10P
U3A
4558
C6
0.1
+12V
C153
100P
U3B
4558
R158
10k
C141
10P
C252
10P
C4
0.1
R256
10K
AUX2
C251
10P
U4A
4558
-12V
C245
22P
120K
+12V
C240
47/10
C255
10/16
U4B
4558
R153
100K
10k
R258
10k
R252
47K
U2B
4558
R10B
50KAA
-12V
C246
47/10
STEREO OUT R
C244
10P
U2A
4558
C241
10P
REC R
R251
20K
C243
10/16
AUX2 SEND
C253
100P
STEREO OUT L
R10A
50KAA
-12V
R250
C146
47/10
U1B
4558
C242
10P
C254
100P
R257
R152
47K
C144
10P
U1A
4558
-12V
REC L
R151
20K
C143
10/16
AUX1 SEND
R255
120K +12V
C250
47/10
C140
47/10
C155
10/16
C145
22P
120K
C3
0.1
10k
R253
100K
AGND
STEREO L
STEREO R
C170
47/10
R170
100
AUX RTN 1L
R172
39K
C172
470P
C270
47/10
R270
100
R12A
30KAA
AUX RTN 1R
R162
120K
R161
100k
C161
10P
R13A
30KAA
R271
100
AUX RTN 2R
R273
39K
C273
470P
R260
120K
C163
47/10
R163
20K
C260
47/10
C167
220/10
C164
10P
U5A
4558
R11A
30KAA
-12V
R262
120K
C263
47/10
R263
20K
R167
20
J1
PHONES
R168
NON
U6A
4558 R166
10k
R165
10K
-12VH
HPGND
C265
10P
C262
10P
S1C
R13B
30KAA
C267
220/10
R264
200K
C266
10/16
R267
20
R268
NON
MONITOR OUT R
AGND
+12V
R164
200K +12VH
+12V
S1B
MON L
C166
10/16
MONITOR OUT L
S1A
C160
47/10
R173
39K
C173
470P
S1D
+12VH
R1
+12V
C7
220/16
4.7
AGND
C165
10P
C162
10P
R12B
30KAA
R171
100
AUX RTN 2L
C271
47/10
R160
120K
R272
39K
C272
470P
C171
47/10
MON SEL
ST
ST+MON
MON
C8
220/16
MON R
R261
100k
C261
10P
U5B
4558
C264
10P
R11B
30KAA
U6B
4558 R265
10K
R266
10k
AGND
AGND
-12V
-12V
R2
4.7
-12VH
HPGND
HPGND
FD-4
43
FD-4
44
MIXER A (3/6)
C512
100P
R517
10k
R516
10k
R520
1.3K
HI GAIN
R543
50KB
C522
47/10
R521
1.3K
R525
27K
R527
36K
PAN
STEREO L
MID GAIN
R515
10k
R502
100
C502
10/16
C503
100P
C504
47/10
J501
INPUT5
INPUTFADER
C510
47/10
S502B
C531
0.1 -12V
R501
100k
R518
2K
S502A
U501A
4558
R503
100k
C501
100P
R504
100
R542B
50KCC
C515
U501B
4558
C511
100P
C534
0.1
C517
0.0068
R519
2K
R528
36K
STEREO R
R526
27K
R530
36K
AUX1
R547
100KB
R523
9.1K
R531
36K
R529
27K
C520
22P
AUX2
U502A
4558
C535
0.1 -12V
R514
9.1k
C518
0.0068
LO GAIN
R542B
50KCC
MIDFRQ
C519
0.015
R544
50KB
R522
9.1K
+12V
100P
R540
50KA
R513
200k
U510
DTC143
C516
100P
C513
0.022
INPUTSEL
*INPUT
*OFF
*TAPE
+12V
C530
0.1
R545
50KB
R541
10KB
C521
22P
U502B
4558
C514
0.012
R548
20KB
R532
27K
R534
36K
MON L
R512
2k
REC MUTE5
MON
R546
50KB
MON PAN
R535
36K
REPRO5
MON R
R533
27K
AGND
R536 +12V
22
+12V
AGND
-12V
AGND
R537
22
-12V
MIXER A (4/6)
C612
100P
R617
10k
R616
10k
R620
1.3K
HI GAIN
R643
50KB
C622
47/10
R621
1.3K
R625
27K
R627
36K
PAN
STEREO L
MID GAIN
R641
10KB
C613
0.022
R615
10k
C630
0.1
R602
100
C602
10/16
INPUTSEL
*INPUT
*OFF
*TAPE
+12V
C603
100P
C604
47/10
S602A
INPUTFADER
C610
47/10
U601A
4558
R603
100k
J601
INPUT6
S602B
C631
0.1 -12V
C601
100P
R604
100
R601
100k
C634
0.1
C617
0.0068
R619
2K
R628
36K
STEREO R
R626
27K
R630
36K
AUX1
R647
100KB
R623
9.1K
R631
36K
R629
27K
C620
22P
AUX2
U602A
4558
C635
0.1 -12V
R614
9.1k
C618
0.0068
LO GAIN
R642B
50KCC
MIDFRQ
C619
0.015
R644
50KB
R622
9.1K
+12V
100P
R640
50KA
R613
200k
U610
DTC143
C616
100P
R618
2K
R642B
50KCC
C615
U601B
4558
C611
100P
R645
50KB
C621
22P
U602B
4558
C614
0.012
R648
20KB
R632
27K
R634
36K
R646
50KB
MON PAN
MON L
R612
2k
REC MUTE6
MON
R635
36K
REPRO6
MON R
R633
27K
AGND
R636 +12V
22
+12V
AGND
-12V
AGND
R637
22
-12V
FD-4
45
FD-4
46
MIXER A (5/6)
R708
2K
S701B
C704
100/10
R704
200K
INPUT7 UNBAL
R702
100k
C702
100P
R701
100k
C701
100P
R720
1.3K
HI GAIN
R743
50KB
R721
1.3K
C722
47/10
R741
10KB
R715
10k
R710 200K
+12V
*INPUT
*OFF
*TAPE
C730
0.1
R711
100
R707
2K
U401A
2068
C703
100/10
R740
50KA
C711
100P
R725
39K
U402A
2068
R713
20K
U710
DTC314
C705
10P
C709
47/10
PAN
R745
50KB
C717
.0068
C716
100P
R718
2K
R742A
50KCC
C734 +12V
0.1
R722
9.1K
C719
.015
R744
50KB
C718
.0068
R727
47K
C733
0.1 -12V
R714
10K
U703A
4558
R719
2K
R730
47K
AUX1
R723
9.1K
AUX
R729
39K
LO GAIN
C715
100P
R742B
50KCC
R728
47K
STEREO R
R726
39K
C720
22P
S702B
R705
20K
R709
200K
C710
47/10
MID
FRQ
-12V C731
0.1
R703
200K
C732 +12V
0.1
INPUTFADER
S702A
C707
NON
INPUT7C
C713
.022
INPUTSEL
C708
47/10
S701A
INPUT7H
R717
10k
STEREO L
C706
10P
R706
20K
J701
MID GAIN
R716
10k
C712
100P
GAIN
*40dB
*20dB
*0dB
R747
100KB
AUX2
R731
47K
R724 NON
C735
0.1 -12V
C714
.012
C721
22P
U703B
4558
INSERT7 SEND
R748
20KB
INSERT7 RTN
R732
39K
R734
47K
MON
PAN
R746
50KB
R733
39K
R735
47K
MON L
R712
470
REC MUTE7
MON
REPRO7
MON R
AGND
R738 +12V
22
+12V
AGND
-12V
R739
-12V
22
AGND
MIXER A (6/6)
R808
2K
S801B
R802
100k
C802
100P
R801
100k
C801
100P
C804
100/10
R815
10k
R810 200K
INPUT8C
C813
.022
INPUTSEL
*INPUT
*OFF
*TAPE
C808
47/10
R811
100
INPUTFADER
R807
2K
U401B
2068
R840
50KA
C811
100P
HI GAIN
R843
50KB
R821
1.3K
C822
47/10
R825
39K
C805
10P
C809
47/10
PAN
R845
50KB
C817
.0068
C816
100P
R818
2K
R842A
50KCC
C834 +12V
0.1
R822
9.1K
C819
.015
R844
50KB
C818
.0068
R827
47K
U402B
2068
R814
10K
U803A
4558
R819
2K
R830
47K
AUX1
R823
9.1K
AUX
R829
39K
LO GAIN
C815
100P
R842B
50KCC
R828
47K
STEREO R
R826
39K
C820
22P
R813
20K
U810
DTC314
R809
200K
C810
47/10
S802B
C803
100/10
R805
20K
R803
200K
MID
FRQ
S802A
C807
NON
S801A
INPUT8H
R820
1.3K
R841
10KB
R804
200K
INPUT8 UNBAL
R817
10k
STEREO L
C806
10P
R806
20K
J801
MID GAIN
R816
10k
C812
100P
GAIN
*40dB
*20dB
*0dB
R847
100KB
AUX2
R831
47K
R824 NON
C835
0.1 -12V
C814
.012
C821
22P
U803B
4558
INSERT8 SEND
R848
20KB
INSERT8 RTN
R832
39K
R834
47K
MON
PAN
R846
50KB
R833
39K
R835
47K
MON L
R812
470
REC MUTE8
MON
REPRO8
MON R
AGND
R838 +12V
22
+12V
AGND
-12V
R839
-12V
22
AGND
FD-4
47
FD-4
48
ANALOG I/O & XLR
J11
J35
A U X RTN 1
L /MO N O
J36
R
J10
1
2
3
4
5
6
7
8
9
A U X RT N 1 L
A U X RT N 1 R
A U X RT N 2 L
A U X RT N 2 R
IN SE RT7 SE N D
RT N
IN SE RT8 SE N D
RT N
AGND
1
2
3
4
5
6
7
8
STE REO O U T L
2SC2878
Q1
R7 10K
J31B
R2
1k
STE REO O U T R
2SC2878
O U TP U T
J37
A U X RTN 2
L /MO N O
J31A
R1
1k
STE RE O L
STE RE O R
M O N I TO R L
M O N I TO R R
AUX1
AUX2
MUTE
AGND
Q2
R8 10K
A U X RTN
IN SE RT
R3
1k
J32A
MO N ITO R O U T L
J38
R
2SC2878
Q3
R9 10K
R4
1k
J39
J32B
MO N ITO R O U T R
2SC2878
IN SE RT7
Q4
R10 10K
J40
IN SE RT8
R5
1k
J33
2SC2878
Q5
A U X SE N D 1
R11 10K
R6
1k
J34
2SC2878
Q6
R12 10K
1
J1
INPUT7
BAL
2
3
AGND
INPUT7H
INPUT7C
AGND
INPUT8H
INPUT8C
1
2
3
4
5
6
J3
INPUT BAL
2
1
J2
INPUT8
BAL
3
A U X SE N D 2
DISPLAY, ROOT (1/3)
D+5
0.1
Non_10/16
1
C2
E101
TP
1
C1
10/16
C3
C4
C5
C6
W3
DGND
Non_JUMPER
GND
0.1
/ATN1
RxD1
TxD1
SCK1
/ATN2
/RST_DISP
Vin
U2
3
-5V
Non_0.1
Non_79L05A
>
R2
(-12V)
Vlcd
/ATN1
R3
100
<
100
>
>
R4
100
R6
100
R5
<
>
R7
100
/ATN2
100
DGND
D+5
A-12
C9
JOG1
JOG0
470p
D+5
DGND
C7
R41
10k
R42
10k
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
DGND
DGND 470p
DGND
DGND
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
C10
D+5
33p
C11
DGND
33p
X1
R8
1M
8MHz
SCAN0
SCAN1
SCAN2
SCAN3
SCAN4
C8
470p
PB1/AN1
PB0/AN0
AVSS
TEST
X_OUT
X_IN
VSS
OSC_IN
OSC_OUT
/RESET
P90
P91
P92
P93
P94
IRQ0
P B2/AN2
P B3/AN3
P B4/AN4
P B5/AN5
P B6/AN6
P B7/AN7
AVCC
P 17/IRQ3/TRGV
P 16/IRQ2
P 15/IRQ1
P 14/P WM
P 10/TMOW
P 30/SCK1
P 31/SI1
P 32/SO1
P 22/TXD
BOADIN 9P
U1
HD6433642H
P 60
P 61
P 62
P 63
P 64
P 65
P 66
P 67
P 50/INT0
P 51/INT1
P 52/INT2
P 53/INT3
P 54/INT4
P 55/INT5/ADTRG
P 56/INT6/TMIB
P 57/INT7
To MAIN
2
R1 0
(F10 JUMPER)
1
2
3
4
5
6
7
8
9
0.1A
10/35
W1
LCD
R42_LCD.SCH
DB[0..7]
P21/RXD
P20/SCK3
P87
P86/FTID
P85/FTIC
P84/FTIB
P83/FTIA
P82/FTOB
P81/FTOA
P80/FTCI
P77
P76/TMOV
P75/TMCIV
P74/TMRIV
P73
VCC
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
DB[0..7]
DB7
DB6
DB5
DB4
DB3
DB2
DB1
DB0
E
R/W
RS
E
R/W
RS
D+5
D+5
DGND
Vlcd
D+5
DGND
Vlcd
C12
0.1
D+5
KEY & LED
R42_KEY.sch
LED_K0
LED_K1
LED_K2
LED_K3
LED_K4
LED_K5
LED_K6
LED_K7
KEY 0
KEY 1
KEY 2
KEY 3
KEY 4
KEY 5
KEY 6
KEY 7
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
DGND
D+5
DGND
DGND
DGND
KEY[0..7]
LED_K[0..7]
SCAN[0..4]
LED_A0
LED_A1
KEY[0..7]
LED_K[0..7]
SCAN[0..4]
JOG0
JOG1
FD-4
49
R/W
RS
E
DB[0..7]
DB0
DB1
2
DGND
D+5
DB[0..7]
DGND
R9
200k
3
DGND
U5
Non_LA5640N
1
R11
1
R16
1k
5kB
Lo< CONTRAST >Hi
R43
U3
R10
2
R12
1k
R13
1k
R14
1k
R15
1k
DGND
3
10k
Vlcd
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
C14
0.1
SEG5
SEG4
SEG3
SEG2
SEG1
COM9
COM10
COM11
COM12
COM13
COM14
COM15
COM16
SEG6
SEG7
SEG8
SEG9
SEG10
SEG16
SEG37
SEG38
SEG39
SEG40
SEG13
SEG18
SEG23
SEG28
SEG33
COM9
COM10
COM11
COM12
COM13
COM7
COM6
COM5
COM4
COM3
COM2
COM1
COM7
COM6
COM5
COM4
COM3
COM2
COM1
DB7
DB6
DB5
DB4
DB3
DB2
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
SEG1
SEG2
SEG3
SEG4
SEG5
SEG6
SEG7
SEG8
SEG9
SEG10
SEG11
SEG12
SEG13
SEG14
SEG15
SEG16
SEG17
SEG18
SEG19
SEG20
SEG21
SEG22
SEG23
SEG24
SEG25
SEG26
SEG27
SEG28
SEG29
SEG30
SEG31
SEG32
SEG33
SEG34
SEG35
SEG36
SEG37
SEG38
SEG39
SEG40
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
SEG39
SEG40
COM16
COM15
COM14
COM13
COM12
COM11
COM10
COM9
DGND
L1
LAMP
0 (F5 Jumper)
D+5
COM[1..16]
COM[1..16]
COM9
COM10
COM11
COM12
COM13
COM7
COM6
COM5
COM4
COM3
COM2
COM1
Vlcd
HD44780U
SEG39
SEG40
COM16
COM15
COM14
COM13
COM12
COM11
COM10
COM 9
COM 8
COM 7
COM 6
COM 5
COM 4
COM 3
COM 2
COM 1
DB7
DB6
DB5
DB4
DB3
DB2
SEG6
SEG7
SEG8
SEG9
SEG10
SEG16
SEG37
SEG38
SEG39
SEG40
SEG13
SEG18
SEG23
SEG28
SEG33
DGND
SEG22
SEG21
SEG20
SEG19
SEG18
SEG17
SEG16
SEG15
SEG14
SEG13
SEG12
SEG11
SEG10
SEG 9
SEG 8
SEG 7
SEG 6
SEG 5
SEG 4
SEG 3
SEG 2
SEG 1
GND
OSC_I
SEG5
SEG4
SEG3
SEG2
SEG1
D+5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
OSC_O
V1
V2
V3
V4
V5
CL1
CL2
VCC
M
D
RS
R/W
E
DB0
DB1
D+5
SEG22
SEG21
SEG20
SEG19
SEG18
SEG17
SEG16
SEG15
SEG14
SEG13
SEG12
SEG11
SEG10
SEG9
SEG8
SEG7
SEG6
SEG5
SEG4
SEG3
SEG2
SEG1
COM9
COM10
COM11
COM12
COM13
COM14
COM15
COM16
Non_1/50
C13
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Vlcd
4
5
SEG23
SEG24
SEG25
SEG26
SEG27
SEG28
SEG29
SEG30
SEG31
SEG32
SEG33
SEG34
SEG35
SEG36
SEG37
SEG38
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
SEG1
SEG2
SEG3
SEG4
SEG5
SEG6
SEG7
SEG8
SEG9
SEG10
SEG11
SEG12
SEG13
SEG14
SEG15
SEG16
SEG17
SEG18
SEG19
SEG20
SEG21
SEG22
SEG23
SEG24
SEG25
SEG26
SEG27
SEG28
SEG29
SEG30
SEG31
SEG32
SEG33
SEG34
SEG35
SEG36
SEG37
SEG38
SEG39
SEG40
SEG23
SEG24
SEG25
SEG26
SEG27
SEG28
SEG29
SEG30
SEG31
SEG32
SEG33
SEG34
SEG35
SEG36
SEG37
SEG38
FD-4
50
DISPLAY, LCD (2/3)
SEG[1..40]
D+5
D+5
U4
LCD_FD4
L2
LAMP DGND
DISPLAY, KEY & LED (3/3)
4
D+5
R19 10k
1
2
3
J1
J2
COM
J1
D+5
C15
0.01
R22 10k
DGND
DGND
R21 10k
JOG
5
R20 100k
U6
R18 10k
J1
R17 100k
JOG0
JOG1
SCAN[0..4]
SCAN[0..4]
C16
0.01
DGND
SCAN0
D8
S8
Non
D7
Non_TACT
S7
Non
D6
S6
Non_TACT
D5
S5
S/R R
D4
S4
S/R L
D3
S3
S/R 4
D2
S2
S/R 3
D1
S1
S/R 2
S/R 1
SCAN1
D16
Non
S16
D15
Non_TACT
Non
S15
D14
Non_TACT
S14
D13
Clip OUT
S13
D12
Clip IN
S12
D11
S20
D19
END
S11
D10
Punch OUT
S10
D9
S9
Punch IN
START
SCAN2
D24
S24
D23
UNDO/REDO
S23
D22
EDIT
S22
D21
STORE
S21
D20
Non_TACT
Non
HOLD
D18
S19
Non_TACT
Non
S18
D17
EXIT
S17
EXECUTE
SCAN3
D32
S32
D31
REW
S31
D30
PLAY
S30
D29
STOP
S29
D28
REC
S28
D27
F FWD
S27
D26
AUTO PLY/RTN
S26
D25
LOCATE
S25
SHIFT
SCAN4
KEY[0..7]
Non_TACT
R28 22k
DGND
Non
Non_TACT
R27 22k
DGND
VARI
D34
SETUP
D33
TIMEBASE SEL
R26 22k
DGND
S34
R25 22k
DGND
S33
DISP SEL
R24 22k
DGND
R23 22k
DGND
KEY 0
Non
S35
KEY 1
DGND
D35
S36
KEY 2
Non_TACT
R29 22k
D36
S37
KEY 3
Non
D37
S38
KEY 4
DGND
D38
S39
KEY 5
Non_TACT
R30 22k
KEY 7
Non
D39
S40
KEY 6
D40
KEY[0..7]
D+5
Q1
R39 1k
LED_A0
2SA1150
Q2
R40 1k
LED_A1
D48
D47
Non_LED_R
Non_LED_R
LED_R
D46
LED_R
D45
S/R R
LED_R
D44
S/R L
LED_R
D43
S/R 4
LED_R
D42
S/R 3
LED_R
D41
S/R 2
S/R 1
2SA1150
LED_K7
LED_K[0..7]
D56
D55
Non_LED_R
Non_LED_R
R38
Non
LED_K6
R37
Non
LED_G
D53
LED_G
D54
STORE
LED_K5
R36
110
LED_K4
R35
110
LED_K3
R34
110
LED_G
D50
LED_G
D51
D52
Non_LED_G
HD ACCESS
PLAY
LED_K2
R33
LED_R
D49
REC
STOP
110
LED_K1
R32
110
LED_K0
R31
110
LED_K[0..7]
FD-4
51
W6
TP
AC IN
W1
TP
0.1/250VAC
W2
TP
C1
PCB AC FILTER
L1
PCB AC FILTER
C26
non
C25
non
F1
250VAC/0.8A
C22
0.0022/250VAC
C21
0.0022/250VAC
LINE FILTER 19mH/0.5A
LINE FILTER 1mH/2.2A
0.1/250VAC
C23
L3
3
2
1
1
W8
non
W3
TP
POWER SW
W7
non
W4
TP
POWER PCB
4
C24
non
-
~
~
IPD MIP
U1
2
3
W5
TP
4
1
1
4
1
C3
TRANSE 3
0.1
R2
6.2
0.1
C4
0.0022/250VAC
C5
6.2
R3
D2
MA171
C6
0.0022/250VAC
9
10
11
8
7
6
3
4
E
C
ON3171
U2
AN1431T
2
1
C10
0.01
R5
75
C9
0.01
C15
470/25V
390P/500V
C7
U5
K
A
C18
330/25V
MA649
33/0.5W
R4
EK13
C17
330/25V
D6
D4
EK13
4
5
3
2
T1
D5
C14
47/25V
D3
DIN60
R1
100k/2W
1
1
3
C2
0.01/630V
C13
100/400V
1
DB-S
D1
2
+
S D
C
1
3
2
1
1
1
1
10k
R8
3
R7
470
0.1
C8
10uH/2A
L2
2
R9
10k
10k
R6
3
GND
1A
U3
NJM7812A
Vin +12V
3
POWER SW
1
2
2
U4
NJM7912A
Vin
1A
GND
52
-12V
POWER
1
1
C12
0.01
C11
0.01
C16
470/25V
C20
330/25V
C19
330/25V
DGND
A-12
A+12
AGND
D+5
1
2
3
4
5
6
7
8
8263M8P
J1
FD-4
MAIN, ROOT (1/9)
AD-DA
L7
AGND HP
A+12
AGND
A-12
MUTE
REC_L
REC_R
A+12
L8
L10
L11
L14
J10
2 L13
11
2
3
4
15
6
17
1
1
DA_D[1..2]
2
2
A-12
AGND
MUTE
8283M7P
REC_L
REC_R
W101
RCA-JACK-SW
J101
LRCK
BCK
MSCK
LRCK
BCK
MSCK
AD_D1
D[0..15]
DA_D[1..2]
A[0..18]
LRCK
BCK
MSCK
SCSI_TMOUT
SC_INT7I
28MHZ
/CS1
/CS_IDE
/CS1
/CS_IDE
A+5
AGND
NON
/CS1
/CS_IDE
2
D+5_1
/DACK1
/AIRQ1
IORDY1
/DREQ1
/ATA_INT1
D+5
D+5_1
DGND1
RCA-JACK-SW
/DACK1
/AIRQ1
IORDY1
/DREQ1
/ATA_INT1
/DACK1
/AIRQ1
IORDY1
/DREQ1
/ATA_INT1
AGND
L201
1
/RD
/WR
SCSI_TMOUT
SC_INT7I
28MHZ
A+5
L101
W201
3
2
1
A[0..18]
/RD
/WR
VCOGND
A-12
2
J201
D[0..15]
A[0..18]
SCSI_TMOUT
SC_INT7I
28MHZ
VCO+5
VCOGND
A+12
A-12
D[0..15]
/RD
/WR
VCO+5
A+12
NON
3
2
1
AD_D1
DA_D[1..2]
REC_L
REC_R
TO MIXER
1
CPU
CPU
AUDIO_IF
AD_D1
2
2
1
REC IN
GATE ARRAY
AD-DA
2
D+5
DGND
DGND1
AGND
/RST
SCSI_CS
DMA_SEL
/RST
SCSI_CS
DMA_SEL
DGND
/RST
SCSI_CS
DMA_SEL
A-12
D+5
D+5
DGND
TP
W9
DGND
TO DISPLAY
A-12
AUDIO_IF.SCH
/RST_ADDA
/MUTE
/RST
R_MUTE[1..4]
/RST_ADDA
/MUTE
/RST
R_MUTE[1..4]
/RST_ADDA
/MUTE
R_MUTE[1..4]
DGND
1
R_ADDA.SCH
DGND
A+5
78M05
U1
A+12
I
O
D+5_1
CPU.SCH
50uH
C1
1/50
C3
10/16
I
O
CONNECT
C18
0.1
AGND
78M05
U2
3
C6
10/16
C4
0.1
C5
0.1
DGND1
VCO+5
DGND
1
G
TO DCDC
8
7
6
5
4
3
2
1
2
C2
0.1
W3
DGND
L1
1
G
3
-12V
GND2
GND2
+12V
GND1
GND1
+5V
+5V
D+5
D+5
A-12
C8
0.1
CONNECT
C9
10/16
2
BOADIN 8P
C7
1/50
VCOGND
W1
NC
TO HDD
1
2
3
4
D+5
D+5HD
L2
50uH
BOADIN-4P
C13
C11
0.1
DGND
10/16
C10
10/16
C12
0.1
DGND
D+5HD
L3
50uH
C17
10/16
C15
0.1
C14
10/16
C16
0.1
DGND
FD-4
53
FD-4
54
MAIN, CPU (2/9)
U20
1
D+5
DTA114EK
3
1
3
SCSI_TMOUT
MEMORY.SCH
D[0..15]
D[0..15]
A17
A18
A[0..18]
A[0..18]
C79
NON
DGND
/WR
/RD
/WR
/RD
SH7042
5
0
MD=2
CLOCK= x4
TP5
NON
MNI
10
C75
D0
D1
D2
D3
D4
13
D5
D6
D7
DGND
D8
D9
D10
D11
C88
0.1
C91
10/16
C69
0.1
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
6
U11
PC900
V
K
4
O
TO
DISPLAY
8283M9P
A-12
100
RXD1
R64
100
14
1
0
C93
0.01
R51
10K
D5
DAN202K
/CS1
3
R52
100
100
SCK1
/ATN2
R44
100
/RST_DISP
D+5
DGND C78
470P
DGND
6
2
U12C
74HC14
2
J9B
R74
220
L19
3
2
BEAD
L20
1
2
BEAD
DIN-5P
2
5 4
3
1
3
6
7
DGND
J9A
0
U24B
74HC32
0
/CS_IDE
R78
100
DGND
4
8
9
SC_INT7I
6
5
C77
100p
U12D
74HC14
10k
SC_INT7I
SCSI_TMOUT
R72
NON
R73
0
DGND
8 MIDI IN
BEAD
R75
220
DTC114EK
U14
5
TXD0
GR
/CS1
DGND
100
D+5
DIN-5P
2
5 4
3
1
10
13
14
1
SCSI_CS
TXD1
R43
2
DGND
R71
R65
2
BEAD
L18
D+5
DGND
/ATN1
L17
1
2
1
5
R62
100
R63
R76
220
1
G
D12
D13
D14
D15
U24A
C92
NON
1 /ATN1
2 RXD1
3 TXD1
4 SCK1
5 /ATN2
6 /RST_DISP
7 DGND
8
9
DGND
1
74HC32
3
D+5
C71
0.01
1
J7
4
DGND
C70
0.1
DGND
DGND
/CS_IDE
D+5
U12B
74HC14
D+5
C95
100p
GR
12
11
U24D
74HC32
A
SCSI_CS
DGND
22p
RXD0
/AIRQ1
/ATA_INT1
IORDY1
U24C
74HC32
22p
R50
1K
GR
9
8
C74
X3
7MHz
PB6/A18/BACK
PB7/A19/BREQ
PB8/A20/WAIT
PB9/A21/ADTRG
VSS
PA14/RD
WDTOVF
PA13/WRH
VCC
PA12/WRL
VSS
PA11/CS1
PA10/CS0
PA9/IRQ3
PA8/IRQ2
PA7/CS3
PA6/CS2
PA5/SCK1
PA4/TXD1
PA3/RXD1
PA2/SCK0
PA1/TXD0
PA0/RXD0
PD15/D15
PD14/D14
PD13/D13
VSS
PD12/D12
A0
U15
R47
10K
11
A8
A9
A10
A11
A12
A13
A14
A15
A16
GR
28MHZ
D+5
9
RDWR
/CS0
/CS2
/RAS
/LCAS
/UCAS
/RD
/WR
2
U12A
74HC14
TP3
NON
DGND
C72
1/50
DGND
SCSI_TMOUT
GR
4
RDWR
/CS0
/CS2
/RAS
/LCAS
/UCAS
/RD
/WR
1
R70
330
R68
330
2
A7
RES/(VPP)
PA15/CK
PLLVSS
PLLCAP
PLLVCC
MD0
MD1
VCC
NMI
MD2
EXTAL
MD3
XTAL
VSS
PD0/D0
PD1/D1
PD2/D2
PD3/D3
PD4/D4
VCC
PD5/D5
PD6/D6
PD7/D7
VSS
PD8/D8
PD9/D9
PD10/D10
PD11/D11
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
0
A6
DGND
PE14/AH
PE15/IRQOUT
VSS
PC0/A0
PC1/A1
PC2/A2
PC3/A3
PC4/A4
PC5/A5
PC6/A6
PC7/A7
PC8/A8
PC9/A9
PC10/A10
PC11/A11
PC12/A12
PC13/A13
PC14/A14
PC15/A15
PB0/A16
VCC
PB1/A17
VSS
PB2/RAS
PB3/CASL
PB4/CASH
VSS
PB5/RDWR
TP4
NON
RESET
1
CT
0
A5
DGND
R69
2.2k
DGND
A4
7
VSA
D+5
A2
A3
RST
DGND
6
VSB
C909
0.01
C73
0.01
R48
10K
2
VSC
U12F
74HC14
D+5
C94
0.01
14
A1
D+5
OC
12
A0
D+5
3
8
DGND
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
13
GND
R77
10K
R46
10K
A[0..18]
11
12
112
111
110
109
108
107
106
105
104
103
102
101
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
10
D[0..15]
MEMORY
D+5
DGND
U13
NJM2103M
VCC
0
GR
DGND
A[0..18]
TP
TP7
GR
/RST
U12E
74HC14
4
D[0..15]
/RST
/RST_DISP
/DREQ1
/DACK1
/RST_ADDA
/MUTE
ADDA
HP JACK MONO
5
/EPROM
FM_RDY
R67
NON
PUNCH IN/OUT
1
D4
DAN202K
GR
DMA_SEL
PE13/MRES
PE12
PE11
VSS
PE10
PE9
PE8
PE7
PE6
VCC
PE5
VSS
AVCC
PF7/AN7
PF6/AN6
AVSS
PF5/AN5
PF4/AN4
PF3/AN3
PF2/AN2
PF1/AN1
PF0/AN0
VSS
PE4
PE3/DRAK1
PE2/DREQ1
PE1/DRAK0
PE0/DREQ0
DGND
/EPROM
FM_RDY
GR
3
C76
0.01
A-12
1
2
3
GND
R49
330
/PUNCH_I/O
R45
10K
DGND
J8
22
BEAD
TP
TP6
D3
DAN202K
1
D+5
MEMORY
GR
L21
1
R66
1.5K
3
D+5
U23
DTA114EK
R82
10K
SSSF1
S1
DGND
2
D+5
3
D+5
U22
DTA114EK
1
A-12
2
1
R81
10K
3
R_MUTE[1..4]
1
R_MUTE[1..4]
A-12
U21
DTA114EK
2
0
ADDA
3
R80
10K
1
R_MUTE1
R_MUTE2
R_MUTE3
R_MUTE4
1
R79
10K
2
1 MIDI OUT
MAIN, MEMORY (3/9)
EPROM1
EPROM2
FLASH MEMORY
DRAM
D[0..15]
D[0..15]
A[0..18]
A[0..18]
U33
U31
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
12
11
10
9
8
7
6
5
27
26
23
25
4
28
29
3
2
30
31
U32
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
D0
D1
D2
D3
D4
D5
D6
D7
OE
CE
D0
D1
D2
D3
D4
D5
D6
D7
13
14
15
17
18
19
20
21
24
22
DGND
D+5
VPP
VCC
GND
1
32
C99
0.01
16
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
HN27C4001G
12
11
10
9
8
7
6
5
27
26
23
25
4
28
29
3
2
30
31
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
U30
D0
D1
D2
D3
D4
D5
D6
D7
OE
CE
13
14
15
17
18
19
20
21
D8
D9
D10
D11
D12
D13
D14
D15
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
24
22
DGND
D+5
VPP
VCC
GND
1
32
16
C98
0.01
D+5
37
HN27C4001G
DGND
25
24
23
22
21
20
19
18
8
7
6
5
4
3
2
1
48
17
16
DGND
C100
NON
D+5
DQ0
DQ1
DQ2
DQ3
DQ4
DQ5
DQ6
DQ7
DQ8
DQ9
DQ10
DQ11
DQ12
DQ13
DQ14
DQ15
OE
CE
WE
VCC
RESET
27
46
Under 2M
DGND
R91
10K
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
VSS
VSS
RY/BG
BYTE
29
31
33
35
38
40
42
44
30
32
34
36
39
41
43
45
D0
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
D12
D13
D14
D15
28
26
11
D+5
D0
D1
D2
D3
D4
D5
D6
D7
A1
A2
A3
A4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
D+5
12
VCC
I/O0
I/O1
I/O2
I/O3
VCC
I/O4
I/O5
I/O6
I/O7
NC
NC
WE
RAS
NC
NC
A0
A1
A2
A3
VCC
VSS
I/O15
I/O14
I/O13
I/O12
VSS
I/O11
I/O10
I/O9
I/O8
NC
LCAS
UCAS
OE
A9
A8
A7
A6
A5
A4
VSS
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
D15
D14
D13
D12
D11
D10
D9
D8
/LCAS
/UCAS
A10
A9
A8
A7
A6
A5
HM51W18160J/ALJ
15
47
MBM29F800-48P
DGND
C96
0.01
2M of 4M
D+5
R92
NON
R87
10K
DGND
FM_RDY
R88
NON
U29
/CS0
/CS2
/CS0
/CS2
/CS2
/CS0
2
3
5
6
11
10
14
13
1
15
/EPROM
1A
1B
2A
2B
3A
3B
4A
4B
A/B
G
74HC157
DGND
1Y
2Y
3Y
4Y
4
7
/CS_EPROM
/CS_FLMEM
9
/RD
12
/WR
D+5
VCC
/RAS
16
C97
0.01
RDWR
/RD
/WR
/RAS
RDWR
DGND
D+5
D+5
DGND
DGND
GND
FD-4
55
FD-4
56
MAIN, AUDIO IF (4/9)
D [0..15]
D [0..15]
V CO + 5
A [0..18]
V CO + 5
V CO G N D
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
D+5
C25
0.01
C23
0.01
DGND
DGND
GND
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
DD7
DD8
DD6
DD9
DD5
D D 10
DD4
D D 11
DD3
D D 12
DD2
D D 13
DD1
D D [ 0..17]
D+5
D M A RQ
/D IO W
/D IO R
IO RD Y _I
/D M A CK
/PD I A G
IN TRQ
/CS1FX
/CS3FX
D D 14
DD0
D D 15
R96
1K
R95
1K
D M A RQ
/D IO W
/D IO R
IO RD Y _I
/D M A CK
/PD I A G
IN TRQ
/CS1FX
/CS3FX
NC
V SS
A TA _RE S
A TA _D 7
A TA _D 8
A TA _D 6
A TA _D 9
V SS
A TA _D 5
A TA _D 10
A TA _D 4
A TA _D 11
A TA _D 3
A TA _D 12
A TA _D 2
A TA _D 13
A TA _D 1
VDD
VDD
A TA _D 14
A TA _D 0
A TA _D 15
D M A RQ
D IO W
D IO R
IO RD Y _I
D M A CK
V SS
V SS
IN TRQ
A TA _A 1
A TA _A 0
A TA _A 2
CS1FX
V SS
VDD
U5
GA2
R9
C30
D+5
DGND
SCSI.SCH
14
3
DGND
/W R
/RD
/A TA _IN T1
/A IRQ 1
/D A CK 1
CPU
DGND
V CO 1
PLL_SEL
FCO N T1
PD 1
EX T_M CLK 1
V CO + 5
V A RI _256
V A RI _FS
V CO + 5
V CO G N D
C20
0.01
0
DGND
5
3
6
G PI F32T
D A TA O U T( O PT)
C26
10/16
R16
R14
1M
A D _D 1
A D _D 1
10
R97
1M
11
GND
C28
100p
4
1
D+5
CPU
D+5
2
D+5
9 U 6D
74H CU 04
8
A TA 3
A TA 4
SC_IN T7I
SCSI_TM O U T
28M H Z
D+5
V CO G N D
VC O 1
V CO 1.SCH
J5
R12
100
28M H Z
CPU
/RST
C27
470p
J4
SCSI_CS
D M A _SEL
SC_IN T7I
CPU
/D REQ 1
R17
1M
/D M A _RD
/D M A _W R
/SCSI_CS
D M A _SEL
/SCSI_D RE Q
4
U 6B
74H CU 04
DGND
C29
NON
SC_IN T7I
SCSI_TM O U T
28M H z
144
143
142
141
140
139
138
137
136
135
134
133
132
131
130
129
128
127
126
125
124
123
122
121
120
119
118
117
116
115
114
113
112
111
110
109
CPU
D+5
A TA [ 0..4]
0
/D M A _RD
/D M A _W R
/SCSI_CS
D M A _SEL
/SCSI_D RE Q
2
R7
100
A TA 2
A TA [ 0..4]
A TA 0
R8
10K
A TA 1
470P
1
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
5.6K
VDD
V SS
WR
RD
NC
A TA _I N T
M LRCK
D A CK _I
V SS
A TA _D REQ
RST
SLA V E
TCRC
TST2
TCK 2
VDD
D IG ITA L_O U T_2
D IG ITA L_IN _2
D IG ITA L_O U T_1
D IG ITA L_IN _1
TEST
EX T_M CLK 2
FCO N T2
PD 2
PLL_SEL
FCO N T1
PD 1
EX T_M CLK 1
V SS
VDD
V A RI _256FS
V A RI _FS
SLA V E_M SCK
SLA V E_M LRCK
NC
NC
20M H z
W2
NON
DGND
6
U 6E
74H CU 04
X4
NON
C911
0
C910
NON
DGND
D A _D 1
D A _D 2
R1
100
R2
100
5
R15
0
R6
100
R5
100
R13
330
C31
22p
LRCK
ADDA
BCK
M SCK
C35
22p
U 6C
74H CU 04
DGND
D A _D [1..2]
D A _D [1..2]
R18
0
0
D D [ 0..17]
/A TA _RST
C34
0.01
U 6A
74H CU 04
VD D
VSS
C S3 FX
D M A _RD
D M A _W R
S C S I_ C S
S C S I_ IN T
S C S I_ D R E Q
S C S I_ A 3
S C S I_ A 4
S C S I_ A 5
A D _ D A TA _ 1 2
A D _ D A TA _ 3 4
A D _ D A TA _ 5 6
A D _ D A TA _ 7 8
A D _ D A TA _ L R
VSS
VD D
D A _ D A TA _ 1 2
D A _ D A TA _ 3 4
D A _ D A TA _ 5 6
D A _ D A TA _ 7 8
D A _ D A TA _ L R
BCK
L RCK
M CL K
VSS
XO 1
X I1
VD D
VSS
XO 2
X I1
VD D
VSS
NC
DGND
SCSI
/A TA _RST
C912
33p
NC
VD D
D0
D1
D2
D3
D4
D5
D6
D7
VSS
D8
D9
D 10
D 11
D 12
D 13
D 14
VD D
D 15
VSS
VSS
A0
A1
A2
A3
A4
A5
A6
A7
A8
CS
C S _ ID E
IO R D Y _ O
VSS
VD D
D+5
PO W ER
/CS1
/CS_ID E
IO RD Y 1
D+5
C21
10/16
CPU
A [0..18]
A8
A7
A6
A5
A4
A3
A2
A1
A9
C24
0.01
C22
0.01
0
D+5
D 15
V CO G N D
D 14
D 13
D 12
D 11
D 10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
PO W ER
DGND
330
X2
16.384M H z
R10
3.3K
C33
0.01
R11
2.2K
X1
22.5792M H z
C32
22p
4
3
5
2
6
G PI F32R
D A TA IN (O PT)
C36
22p
DGND
DGND
1
MAIN, SCSI (5/9)
/ATA_RST
GA
DMARQ
IORDY_I
INTRQ
D+5
R29
4.7K
DD[0..17]
J12
NON
W7
NON
W8
NON
ATAD4
/ATA_RST
DGND
DD7
DD8
DD6
DD9
DD5
DD10
DD4
DD11
DD3
DD12
DD2
DD13
DD1
DD14
DD0
DD15
DGND
KEYPIN
DMARQ
DGND
/DIOW
DGND
/DIOR
DGND
IORDY
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
D+5
BHE
UDP
D15
D14
D13
D12
D11
D10
D9
D8
VSS
D7
D6
D5
D4
D3
D2
D1
D0
LDP
CS1
VSS
VCC
CS0
A4
DGND
S9
/DIOW
/DIOR
/DMACK
GA
S17
S16
S15
S14
S13
S12
S11
D+5
DMACK
DGND
INTRQ
/IOCS16
ATA1
/PDIAG
ATA0
ATA2
/CS1FX
/CS3FX
/DASP
DGND
R28
NON
D+5
2
1
S10
WR
RD
VCC
VSS
CLK
RESET
INT
MODE
DBP
VSS
DB7
DB6
DB5
VCC
VSS
VSS
DB4
DB3
DB2
DB1
VSS
DB0
TEST1
TMOUT
(OPEN)
U7
MB86604L
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
J6
ATAD3
ATAD2
ATAD1
ATAD0
/ATN
S5
/BSY
/ACK
/RES
S7
S6
S4
/MSG
/SEL
/C/D
/REQ
S1
S8
S2
S0
/I/O
S3
/REQ
S1
S2
S3
/MSG
/C/D
/I/O
S4
S5
S6
/RES
/ATN
/ACK
S7
S8
/BSY
/SEL
S9
S10
S11
/DBP
/DB0
/DB1
S12
S13
S14
S15
/DB2
/DB3
/DB4
/DB5
S16
/DB6
/TPWR
/DB7
S17
26
1
14
2
15
3
16
4
17
5
18
6
19
7
20
8
21
9
22
10
23
11
24
12
25
13
27
SCSI
DSUB-25P
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
S[0..17]
DGND
DD16
DD15
DD14
DD13
DD12
DD11
DD10
DD9
DD8
DD7
DD6
DD5
DD4
DD3
DD2
DD1
DD0
DD17
/PDIAG
/CS1FX
/CS3FX
D+5
S[0..17]
U8
D+5
DD[0..17]
DD[0..17]
R19
4.7K
GA
ATA[0..4]
S0
DGND
W5
2P JUMPER
GA
A3
A2
A1
A0
ATN
VSS
BSY
ACK
RES
VSS
VSS
VCC
MSG
SEL
C/D
REQ
VSS
I/O
TEST2
(OPEN)
TP
VSS
VCC
DREQ
DMACK
DMA W R
DMA RD
VCC
VSS
DMA 0
LDMDP
DMD 0
DMD 1
DMD 2
DMD 3
DMD 4
DMD 5
DMD 6
DMD 7
VSS
DMD 8
DMD 9
DMD10
DMD11
DMD12
DMD13
DMD14
DMD15
UDMDP
DMBHE
R27
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
DGND
TO IDE HD
DD17
DD0
DD1
DD2
DD3
DD4
DD5
DD6
DD7
W6
DD8
DD9
DD10
DD11
DD12
DD13
DD14
DD15
DD16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
ATAD[0..4]
ATA[0..4]
/DBP
/DB0
/DB1
/DB2
S9
S10
S11
S12
/DB3
/DB4
/DB5
/DB6
/DB7
S13
S14
S15
S16
S17
1
2
3
4
5
6
N.C.
EN
SCSI15
SCSI16
SCSI17
SCSI18
TSD
VM
SCSI14
SCSI13
SCSI12
SCSI11
VSS
SCSI1
SCSI2
SCSI3
SCSI4
SCSI5
VCC
SCSI10
SCSI9
SCSI8
SCSI7
SCSI6
VCC
25
24
23
22
21
20
S8
S7
S6
S5
/SEL
/BSY
/ACK
/ATN
S4
S3
S2
S1
S0
/RES
/I/O
/C/D
/MSG
/REQ
/DMACK
GA
/DMA_RD
/DMA_WR
/SCSI_CS
DMA_RDB
DMA_WRB
SCSI_CSB
SC_INT7I
/SCSI_DREQ
GA
CPU
28MHZ
0
GA
7
8
9
10
11
12
13
SC_INT7I
BH9595FP
DGND
12
SC_DREQB
13
19
18
17
16
15
14
D+5
D1
U6F
74HCU04
28MHZ
R26
DMA_SEL
SCSI_TMOUT
ATA0
ATA1
ATA2
ATA3
ATA4
R21
100
R22
100
R23
100
R24
100
R25
100
0
R20
NON
ATAD0
ATAD1
1
2
CPU
EK13
C48
10/16
C47
0.1
DGND
DGND
ATAD2
ATAD3
D+5
ATAD4
D+5
POWER
C41
NON
DGND
C45
NON
C42
NON
DGND
C46
100/10
C43
NON
C39
0.01
C40
0.01
C38
0.01
C37
0.01
DGND
GND
C44
NON
FD-4
57
FD-4
58
MAIN, ADDA - ROOT (6/9)
G=-0.9dB
ADDA
C103
0.01
C101
10/16
R101
20k
R102
12k
ADDA_DG
AGND
10K
7
C105
10/16
2
5
R105
330
1
U101B
NJM2115M
U101A
NJM2115M
C108
NON
C106
10/16
TO
R106
330
C104
0.01
MIXER
R107
NON
AIN1+
AIN1-
AIN2+
AIN2-
3
0
C107
NON
4
R109
100K
AIN1+
AIN1-
8
R103
6
L102
L302
L103
L303
ADDA_OUT
R104
10K
0
REC_L
ADDA_OUT
A+5
AOUT1+
AOUT2+
AOUT3+
AOUT4+
AOUT1+
AOUT2+
AOUT3+
AOUT4+
AOUT1+
AOUT2+
AOUT3+
AOUT4+
AOUT1
AOUT2
AOUT3
AOUT4
AIN2+
AIN2-
AOUT1
AOUT2
AOUT3
AOUT4
R_MUTE1
R_MUTE2
R_MUTE3
R_MUTE4
C102
1500P
L202
L402
L203
L403
2
1
1
1
2
1
1
2
1
1
2
1
AGND
C203
0.01
R201
20k
R202
12k
R108
NON
A+5
R204
10K
AGND
8
0
REC_R
6
7
R203
10K
C205
10/16
2
5
0
A+12
U201A
NJM2115M
NJM2115M
C207
NON
MUTE
3
C208
NON
4
R209
100K
R205
330
1
U201B
C206
10/16
R206
330
C204
0.01
C202
1500P
A+12
A-12
AGND
A+5
A+5
AGND
A-12
AGND
AGND
R207
NON
A+5
R208
NON
U904F
74HC04
VBIAS
D+5_1
A+12
12
DA_D[1..2]
C904
100/10
DGND
MUTE
CPU
2
3
1
/MUTE
1
CPU
R912
10K
DGND
GR
5
2
9
3
U904C
74HC04
6
BCK
1
3
R904
100
4
U904B
74HC04
R907
10K
A-12
A+12
DA_D[1..2]
A-12
/RST
RST_ADDA
MSCK_ADDA
LRCK_ADDA
BCK_ADDA
MSCK_AD
ADDA_DG.SCH
MSCK_ADDA
LRCK_ADDA
0
2
U904A
74HC04
U903
DTA114EK
R903
220
8
U904D
74HC04
D+5
C913
100/25
GR
3
LRCK
10
14
1
1
R906
10KDTC114EK
U902
2
11
U904E
74HC04
D6
3
MSCK
MSCK_AD
AD_D1
0
0
GR
3
0
D7
RB400D
2
/RST
R902
100
R901
NON
A+12
DA_D[1..2]
/RST_ADDA
/RST_ADDA
AGND
DTC114EK
U901
AD_D1
AD_D1
GR
C903
0.01
R_MUTE[1..4]
DGND1
13
R909
1K
R_MUTE[1..4]
CPU
DGND1
0
R908
1K
ADDA_OUT.SCH
D+5_1
AGND
C905
0.01
DGND
R905
100
BCK_ADDA
D+5_1
D+5_1
DGND1
A-12
DGND1
A+5
D+5
A+5
D+5
AGND
DGND
AGND
MIXER
J3
1
22
3
42
5
62
7
82
9
REPRO1
REPRO2
REPRO3
REPRO4
AGND
8283M9P
AGND
C201
10/16
TO
DGND
GND
MAIN, ADDA - DG (7/9)
AIN2+
AIN2AIN1+
AIN1-
A+5
RST_ADDA
/RST
MSCK_ADDA
LRCK_ADDA
BCK_ADDA
MSCK_AD
C155
0.1
AD_D1
U151
C153
10/16
C151
10/16
AGND
1
2
3
4
5
6
7
8
9
10
11
12
C154
0.01
C152
0.01
D+5_1
AINR+
AINRVREF
VA
AGND
AINL+
AINTST1
HPFE
TST2
TST3
VD
VB
SMODE
CMODE
SDATA
FSYNC
LRCK
SCLK
MCLK
PD
SMODE2
TST4
DGND
24
23
22
21
20
19
18
17
16
15
14
13
AGND
R152
100
AD_D1
LRCK
BCK
MSCK
RST_ADDA
D+5_1
R161
10
C166
10/16
/RST
BCK
DA_D1
DGND1
DGND1
MSCK
/RST
BCK
DA_D2
D+5_1
AGND
DGND1
C906
0.1
C164
0.01
C163
47/16
AGND
LRCK
C267
0.01
1
2
3
4
5
6
7
8
9
10
11
12
CKS
DVDD
DVSS
XTO
XTI
PD
BICK
SDATA
LRCK
SMUTE
DFS
DEM0
AK4321
A+5
C262
0.01
U252
C266
10/16
D+5_1
C165
NON
D+5_1
C157
0.01
A+5
W102
NON
AOUT1+
AOUT2+
DGND1
R261
10
A+5
C161
10/16
LRCK
AK5351
AGND
TTL
DZF
VREF
AVSS
AVDD
VCOM
AOUTL
AOUTR
BVDD
DIF1
DIF0
DEM1
24
23
22
21
20
19
18
17
16
15
14
13
AK4321
R151
10
C156
10/16
C167
0.01
DGND1
MSCK
CKS
DVDD
DVSS
XTO
XTI
PD
BICK
SDATA
LRCK
SMUTE
DFS
DEM0
A+5
C162
0.01
U152
1
2
3
4
5
6
7
8
9
10
11
12
TTL
DZF
VREF
AVSS
AVDD
VCOM
AOUTL
AOUTR
BVDD
DIF1
DIF0
DEM1
24
23
22
21
20
19
18
17
16
15
14
13
C261
10/16
W202
NON
AOUT3+
AOUT4+
C265
NON
C264
0.01
C263
47/16
DGND1
AGND
DGND1
DGND
GR
DA_D[1..2]
DA_D[1..2]
FD-4
59
FD-4
MAIN, ADDA - OUT (8/9)
A+12
C111
10/16
AOUT1+
U153A
NJM4560M
3
8
C113
0.01
AGND
C116
47/16
1
AOUT1
2
R111
10K
R113
2.7K
R114
100K
4
C115
NON
C112
680P
R112
10K
AGND
A-12
AOUT2+
U153B
NJM4560M
5
0
C211
10/16
C114
0.01
C216
47/16
7
AOUT2
6
R211
10K
R213
2.7K
R214
100K
0
C215
NON
C212
680P
R212
10K
AGND
A+12
C311
10/16
AOUT3+
U253A
NJM4560M
3
8
C213
0.01
AGND
C316
47/16
1
AOUT3
2
R311
10K
R313
2.7K
R314
100K
4
C315
NON
C312
680P
R312
10K
AGND
C411
10/16
AOUT4+
U253B
NJM4560M
5
C214
0.01
0
A-12
C416
47/16
7
R412
10K
R413
2.7K
A+12
R414
100K
0
C415
NON
C412
680P
AGND
AGND
A-12
AGND
60
A+12
AOUT4
6
R411
10K
A-12
MAIN, VCO (9/9)
VCO1
L6
VCO+5
22uH
GR
PLL_SEL
C61
0.01
VCO+5
POWER
VCO+5
C62
0.01
C63
10/16
VCO+5
R42
1.2K
VCOGND
VCOGND
R37
750
GR
R35
750
VCOGND
U10
1
REF
2
PD
3
VDDA
4
AMPI
5
AMPO
6
VSSA
7
XI
8
XO
R36
100K
PD1
R40
1.2K
R38
750
C65
0.047
C64
220P
VCOGND
R41
560
EXT_MCLK1
C68
0.1
VCOGND
DGND
C67
120P
R39
20K
GR
16
15
14
13
12
11
10
9
VDD
LOCK
S2
S1
M2
M1
CKO
VSS
TC9246F
C66
0.01
VCOGND
TEST PIN
TP2
LOCK_1
L4
22uH
VCO+5
FCONT1
C49
0.01
C59
10/16
C50
0.01
TEST PIN
TP1
LOCK_VARI
VCOGND
GR
VARI_FS
U9
R30
1.5K
C52
15P
VCOGND
1
2
3
4
5
6
7
8
R32
220K
R31
100
REF
PD
VDDA
AMPI
AMPO
VSSA
XI
XO
TC9246F
C57
0.01
16
15
14
13
12
11
10
9
VDD
LOCK
S2
S1
M2
M1
CKO
VSS
VARI_256
GR
R34
330
C60
0.1
VCOGND
DGND
C51
0.01
C58
0.47
31TYPE
FD-4
61
FOSTEX CORPORATION 3-2-35 Musashino, Akishima, Tokyo, Japan 196-0021
FOSTEX CORPORATION OF AMERICA 15431 Blackburn Ave., Norwalk, CA 90650, U.S.A.
© PRINTED IN JAPAN MAY 1998 8288771000

FD-4 Service Manual for web.p65

Transcription

Similar documents

Fostex -- VM200 -

Bedienungsanleitung V1.02

Bedienungsanleitung

PriceList 2009