quality abrasives for professionals

Transcription

QUALITY ABRASIVES FOR PROFESSIONALS
ABMAST
Products for cutting and finishing
Made in Canada
F
ounded in 1981, ABMAST has grown to become the leading Canadian
manufacturer of depressed center grinding and cut-off wheels.
The use of high quality raw materials, converted by state of the art equipment,
supervised by competent and experienced personnel, has permitted ABMAST to
build its reputation on quality throughout the world.
O
ur laboratory staff
constantly strives to research
new products and new formulas
to insure that ABMAST is ready
to confront the chalenges of the
21st century and to offer you a
complete line of abrasive products that will satisfy your needs
for performance, productivity,
security and cost savings.
VISUAL INDEX
CUT-OFF WHEELS AND DEPRESSED CENTER GRINDING WHEELS
Metal
Pipeline
Zirconium
Stainless steel
Ductile iron
Aluminium
Concrete
Railroad track
Asphalt
Masonry
Cast iron
Sheet metal
Metal studs
5, 6, 7
6
6
8
8
8
8
7
7
9, 10
13, 14
9, 11
12, 13
9
10, 11
13
14
15
16
15
16
16
17, 18
19
20, 21
18
18
19
18
22
22
20, 21
18
15
20, 21
22
20,21,22
17
6
19
8
20
18
22
22
ABMAST
INDEX
RESIN BONDED ABRASIVES
1
RESINOID WHEELS/Technical information
Depressed center grinding wheels
Depressed center cut-off and light grinding wheels
Depressed center cut-off wheels
Cut-off wheels for angle grinders
Cut-off wheels for circular saws
Small cut-off wheels for pencil and die grinders
Cut-off wheels for portable chop-saws
Cut-off wheels for stationary and “Swing Frame” machines
Cut-off wheels for portable high speed power saws
Cut-off wheels for portable high speed power saws - Rail-Kut
Cut-off wheels for saw with “Swing Frame” attachment - Rail-Kut
Cut-off wheels for road construction saws
Cup wheels
Plug and cone wheels
Spiral ribbed flexible grinding discs (concrete)
Flexible grinding discs “Ab-Flex”
Page
Pages
Page
Pages
Pages
Page
Page
Pages
Pages
Pages
Page
Page
Page
Page
Page
Page
Page
4
5, 6, 7
8
9, 10, 11
12, 13, 14
15
16
17, 18
18, 19
20, 21
22
22
22
23
24
24
24
VITRIFIED ABRASIVES
2
Bench, pedestal and chain saw sharpening wheels
Hand and floor rubs
Mounted points
Page 25
Page 25
Pages 26, 27
COATED ABRASIVES
3
Resin fiber discs
Flap discs “Poly-Flap”
Flap discs “Jumbo Poly-Flap”
Flap discs “Poly-Flap II”
Mounted flap wheels
Alo cut sheets
General purpose abrasive belts
Zirconium abrasive belts
Shop rolls
Sanding rolls
Sanding discs with “Velcro” backing
Pressure sensitive adhesive cloth discs (P.S.A.)
Mini resin polymer discs
Mini resin fiber discs
Pages
Page
Page
Page
Page
Pages
Page
Pages
Page
Page
Page
Page
Page
Page
28, 29
30
31
31
32
32, 33
34
35, 36, 37, 38
39
39
40
40
41
41
Page
Page
Page
Page
42
43
44
44
NON-WOVEN ABRASIVES
4
Discs
Discs and hand pads
Depressed center wheels “Poly-Strip”
Flat wheels “Poly-Strip”
ABMAST
INDEX (CONTINUED)
FLOOR SANDING PRODUCTS
5
Floor sanding sheets
Floor sanding rolls / Floor sanding sleeves
Floor sanding discs
Edge sanding discs
Floor maintenance pads
Mesh screen discs and sheets
Page
Page
Pages
Page
Page
Page
45
46
47, 48
49
49
50
Page
Page
Pages
Page
51
52
53, 54, 55
56
WIRE BRUSHES
6
WIRE BRUSHES/Technical information
Circular brushes
Circular and cup brushes
Hand and wire end brushes
WIRE BRUSHES FOR DIY-MARKET
Circular, cup and end brushes
For polishing
Pages 58, 59, 60
Page 61
CARBIDE BURS
7
Carbide burs
Carbide burs displays
Pages 62, 63
Page 63
DIAMOND PRODUCTS
8
SPECIALITY BLADES / ELECTROPLATED BLADES
DIAMOND PRODUCTS/Technical information
Road construction saws
High speed saw blades
Blades for stationary machine
Blades for angle grinders and circular saws
Small diameter diamond blades
Small diameter diamond blades and cup wheels
Hole saw bits
Measuring gauge
High speed saw blades - Uni Plus / Uni Pro
High speed and masonry blades - Uni Pro
Road construction saws - Uni Pro
Small diameter diamond blades - Uni Pro / Uni Plus
Continuous rim tile blades - Uni Pro / Uni Plus
Small diameter tuck point blades - Uni Pro / Uni Plus
Cup wheels turbo and segmented - Uni Pro
Core bits and polishing pads - Uni Pro
Page
Page
Pages
Pages
Pages
Page
Page
Page
Pages
Page
Pages
Page
Page
Pages
Page
Page
Page
Pages
64
65
66, 67
68, 69
70, 71
71
72
73
74, 75
74
76-77
77
78
78, 79
79
80
81
81, 82
ACCESSORIES
9
ACCESSORIES
Pages 83, 84, 85
Alpha-numerical index
Pages 86, 87, 88,
89, 90, 91, 92
RESINOID WHEELS
TECHNICAL INFORMATION
What is an abrasive wheel?
Bonding agent
An abrasive wheel is a self-sharpening grinding or cutting tool
composed of abrasive grains held in place by a bonding agent.
All abrasive wheels, with a few exceptions, are reinforced with one
or more layers of fiberglass mesh for extra strength, flexibility
and safety.
A synthetic organic resin holds the grains together. The amount
of bonding material determines the toughness and resistance of
the wheels under cutting or grinding loads.
The more bonding agent, the harder the wheel.
How do abrasive wheels work?
Letter codes indicate wheel hardness:
Soft A « « « N - P - Q - R - S - T » » » Z Hard
Fast cutting
Long life
As the wheel comes into contact with the work piece, exposed
surface grains grind away small chips of the material. During the
grinding process, new grains are constantly fracturing, exposing
new sharp cutting points. This process also wears away the bond
between the grains causing the old dull ones to break away while
constantly exposing new sharper grains until the wheel is
completely worn down.
One or more woven fiberglass mesh, impregnated with resin, are
added to ensure resistance encountered from lateral and
centrifugal pressures. Thickness and type of fiberglass mesh used
vary according to the machine being used with the wheel.
Most common used grains
Types of depressed center wheels
ALUMINIUM OXIDE: a tough wedge-shaped abrasive used for
cutting or grinding metals.
TYPE 27: these should be used at an angle to the workpiece
between 30° and 45°. Do not grind flat.
TYPE 28: manufactured with a built-in grinding angle for
flat grinding.
SILICON CARBIDE: a very hard and sharp abrasive used for
cutting and grinding concrete, masonry, stone and other
non-metallic materials.
ZIRCONIUM: an extremely resistant grain used for cutting and
grinding metals.
Grain sizes
Numbers are used to indicate grain size:
Reinforcing materials
The right choice
Determining the right specification depends on several factors: the
type of material to be cut or ground, the R.P.M. of the tool, type of
finish desired, etc. It is very important that you choose the appropriate wheel for the application desired. For any other technical
information, contact our customer service department.
Coarse « « 8 - 16 - 24 - 30 - 36 - 60 - 80 Fine
Faster cut
Slower cut
Rough finish
Smooth finish
WARNING!
MISUSE OF ABRASIVE WHEELS IS EXTREMELY DANGEROUS.
FOR FURTHER INFORMATION CONCERNING SAFE USAGE OF ABRASIVE PRODUCTS,
CONSULT THE ANSI B7.1 SECURITY CODE.
1
DEPRESSED CENTER GRINDING WHEELS
Premium PRO MS metal and stainless steel
Type 27
Dimensions
4-1/2" x 1/4" x 7/8"
4-1/2" x 1/4" x 5/8"-11
5" x 1/4" x 7/8"
5" x 1/4" x 5/8"-11
6" x 1/4" x 7/8"
6" x 1/4" x 5/8"-11
7" x 1/4" x 7/8"
7" x 1/4" x 5/8"-11
9" x 1/4" x 7/8"
9" x 1/4" x 5/8"-11
Code
D247MS
D248MS
D547MS
D548MS
D647MS
D648MS
D747MS
D748MS
D947MS
D948MS
R.P.M.
13 200
13 200
12 200
12 200
10 000
10 000
8 600
8 600
6 600
6 600
Box
25
10
25
10
25
10
25
10
25
10
Ctn
100
40
100
40
40
40
GENERAL PURPOSE, FAST
GRINDING
By combining various aluminium oxide grains, this
wheel offers fast stock removal, improved grinding
time and less operator fatigue.
Applications:
Ferrous metals, Welds, Structural steel and hard
ferrous metals.
Premium PRO metal
Type 27
Dimensions
4-1/2" x 1/4" x 7/8"
4-1/2" x 1/4" x 5/8"-11
5" x 1/4" x 7/8"
5" x 1/4" x 5/8"-11
Code
D247PRO
D248PRO
D547PRO
D548PRO
R.P.M.
13 200
13 200
12 200
12 200
Premium A 24 R metal
Box
25
10
25
10
Ctn
100
40
100
40
GENERAL PURPOSE, LONGER LIFE
These new Pro Metal wheels are made to last
long and to give you an excellent grinding ratio.
Applications:
Ferrous metals, Welds and Structural steel.
Type 27
Dimensions
3" x 1/4" x 3/8"
4" x 1/4" x 3/8"
4" x 1/4" x 5/8"
4-1/2" x 1/4" x 7/8"
4-1/2" x 1/4" x 5/8"-11
5" x 1/4" x 7/8"
5" x 1/4" x 5/8"-11
6" x 1/4" x 7/8"
6" x 1/4" x 5/8"-11
7" x 1/4" x 7/8"
7" x 1/4" x 5/8"-11
9" x 1/4" x 7/8"
9" x 1/4" x 5/8"-11
Code
D343R
D443R
D445R
D247R
D248R
D547R
D548R
D647R
D648R
D747R
D748R
D947R
D948R
R.P.M.
20 300
15 300
15 300
13 200
13 200
12 200
12 200
10 000
10 000
8 600
8 600
6 600
6 600
Box
25
25
25
25
10
25
10
25
10
25
10
25
10
Ctn
100
100
100
40
100
40
40
40
GENERAL PURPOSE, LONG LIFE
Produced with high quality aluminium oxide grain
for superior performance and extended life in
grinding ferrous metals.
Applications:
Ferrous metals, Welds, Structural steel.
Type 28
Dimensions
7" x 1/4" x 7/8"
7" x 1/4" x 5/8"-11
9" x 1/4" x 7/8"
9" x 1/4" x 5/8"-11
Code
E747R
E748R
E947R
E948R
R.P.M.
8 600
8 600
6 600
6 600
Box
25
10
25
10
Ctn
40
40
This shape has been developed for applications
that require horizontal grinding.
Applications:
ACCESSORIES See page 83.
Other specifications and dimensions available on request.
5
1
Kompetitor metal
Type 27
Dimensions
4" x 1/4" x 5/8"
4-1/2" x 1/4" x 7/8"
4-1/2" x 1/4" x 5/8" -11
5" x 1/4" x 7/8"
5" x 1/4" x 5/8" -11
6" x 1/4" x 7/8"
6" x 1/4" x 5/8" -11
7" x 1/4" x 7/8"
7" x 1/4" x 5/8" -11
9" x 1/4" x 7/8"
9" x 1/4" x 5/8" -11
Code
D445KR
D247KR
D248KR
D547KR
D548KR
D647KR
D648KR
D747KR
D748KR
D947KR
D948KR
R.P.M.
15 300
13 200
13 200
12 200
12 200
10 000
10 000
8 600
8 600
6 600
6 600
Box
25
25
25
25
25
25
10
25
10
25
10
Ctn
100
100
100
100
40
40
GENERAL PURPOSE,
FAST GRINDING
Made with aluminium oxide grain, this economically
priced wheel offers fast stock removal.
Applications:
Structural steel, Pipe, Rebar, Welds, Ferrous metals.
Zirconium Z 24 R metal
Type 27
Dimensions
4" x 1/4" x 5/8"
4-1/2" x 1/4" x 7/8"
4-1/2" x 1/4" x 5/8" -11
5" x 1/4" x 7/8"
5" x 1/4" x 5/8" -11
7" x 1/4" x 7/8"
7" x 1/4" x 5/8" -11
9" x 1/4" x 7/8"
9" x 1/4" x 5/8" -11
Code
D445Z
D247Z
D248Z
D547Z
D548Z
D747Z
D748Z
D947Z
D948Z
R.P.M.
15 300
13 200
13 200
12 200
12 200
8 600
8 600
6 600
6 600
Box
25
25
10
25
10
25
10
25
10
Ctn
100
100
40
100
40
40
40
GENERAL PURPOSE,
EXTRA LONG LIFE
Zirconium oxide grain wheels offer superior stock
removal combined with exceptional wheel life.
Applications:
Premium AA 30 R stainless steel and metal
Type 27
Dimensions
4" x 1/4" x 5/8"
4-1/2" x 1/4" x 7/8"
4-1/2" x 1/4" x 5/8" -11
5" x 1/4" x 7/8"
5" x 1/4" x 5/8" -11
6" x 1/4" x 7/8"
6" x 1/4" x 5/8" -11
7" x 1/4" x 7/8"
7" x 1/4" x 5/8" -11
9" x 1/4" x 7/8"
9" x 1/4" x 5/8" -11
Code
D445X
D247X
D248X
D547X
D548X
D647X
D648X
D747X
D748X
D947X
D948X
R.P.M.
15 300
13 200
13 200
12 200
12 200
10 000
10 000
8 600
8 600
6 600
6 600
Box
25
25
10
25
10
25
10
25
10
25
10
Ctn
100
100
40
100
40
40
40
FAST AND COOL GRINDING
Developed with white aluminium oxide grain to
avoid overheating, glazing and discoloration on
stainless steel, while providing exceptional
stock removal.
Applications:
Stainless steel, Extremely hard metals,
Ferrous metals.
Premium AC 20 T cast iron
Type 27
Dimensions
7" x 1/4" x 7/8"
7" x 1/4" x 5/8" -11
9" x 1/4" x 7/8"
9" x 1/4" x 5/8" -11
6
Code
D747T
D748T
D947T
D948T
R.P.M.
8 600
8 600
6 600
6 600
Box
25
25
25
25
Ctn
-
FAST AND HIGH STOCK REMOVAL
High performance wheel for the foundry industry.
Resists loading and glazing.
Applications:
Iron, Steel castings, Brass, Bronze.
1
Supra metal
Type 27
Dimensions
4" x 1/4" x 5/8"
4-1/2" x 1/4" x 7/8"
4-1/2" x 1/4" x 5/8" -11
5" x 1/4" x 7/8"
5" x 1/4" x 5/8" -11
6" x 1/4" x 7/8"
6" x 1/4" x 5/8" -11
7" x 1/4" x 7/8"
7" x 1/4" x 5/8" -11
9" x 1/4" x 7/8"
9" x 1/4" x 5/8" -11
Code
D445V
D247V
D248V
D547V
D548V
D647V
D648V
D747V
D748V
D947V
D948V
R.P.M.
15 300
13 200
13 200
12 200
12 200
10 000
10 000
8 600
8 600
6 600
6 600
Box
25
25
10
25
10
25
10
25
10
25
10
Code
D247A
D248A
D547A
D548A
D747A
D748A
R.P.M.
13 200
13 200
12 200
12 200
8 600
8 600
Box
25
10
25
10
25
10
Code
D445C
D247C
D248C
D547C
D548C
D647C
D648C
D747C
D748C
D947C
D948C
R.P.M.
15 300
13 200
13 200
12 200
12 200
10 000
10 000
8 600
8 600
6 600
6 600
Box
25
25
10
25
10
25
10
25
10
25
10
Premium ALU 24 aluminium
Dimensions
4-1/2" x 1/4" x 7/8"
4-1/2" x 1/4" x 5/8" -11
5" x 1/4" x 7/8"
5" x 1/4" x 5/8" -11
7" x 1/4" x 7/8"
7" x 1/4" x 5/8" -11
Ctn
100
100
40
100
40
40
40
Superior quality aluminium oxide grains combined
with a special formula enables us to produce a
longer lasting grinding wheel that develops less
dust when grinding all types of ferrous metals.
Applications:
Type 27
Ctn
100
40
100
40
40
FAST GRINDING, CLOG RESISTANT
A blend of special additives combined with an open
grain structure provides clog-free grinding in
aluminium and soft non-ferrous metals.
Applications:
Aluminium, Soft bronze, Brass, Non-ferrous metals.
Premium C 24 R concrete
Type 27
Dimensions
4" x 1/4" x 5/8"
4-1/2" x 1/4" x 7/8"
4-1/2" x 1/4" x 5/8" -11
5" x 1/4" x 7/8"
5" x 1/4" x 5/8" -11
6" x 1/4" x 7/8"
6" x 1/4" x 5/8" -11
7" x 1/4" x 7/8"
7" x 1/4" x 5/8" -11
9" x 1/4" x 7/8"
9" x 1/4" x 5/8" -11
Dimensions
7" x 1/4" x 7/8"
7" x 1/4" x 5/8" -11
9" x 1/4" x 7/8"
9" x 1/4" x 5/8" -11
Ctn
100
100
10
100
40
40
40
Silicon carbide grain has been used in the
formulation of this wheel to provide exceptional
grinding results on concrete and various
non-ferrous metals.
Applications:
Concrete, Masonry, Brick, Block, Stone, Aluminium,
Non-ferrous metals, Cast iron.
Type 28
Code
E747C
E748C
E947C
E948C
R.P.M.
8 600
8 600
6 600
6 600
Box
25
10
25
10
Ctn
40
40
This shape has been developed for applications
that require horizontal grinding.
Applications:
7
1
DEPRESSED CENTER CUT-OFF AND LIGHT GRINDING WHEELS
Kombination metal and stainless steel
Type 27
Dimensions
4" x 1/8" x 5/8"
4-1/2" x 1/8" x 7/8"
4-1/2" x 1/8" x 5/8" -11
5" x 1/8" x 7/8"
5" x 1/8" x 5/8" -11
6" x 1/8" x 7/8"
6" x 1/8" x 5/8" -11
7" x 1/8" x 7/8"
7" x 1/8" x 5/8" -11
9" x 1/8" x 7/8"
9" x 1/8" x 5/8" -11
Code
D485P3
D287P3
D288P3
D587P3
D588P3
D687P3
D688P3
D787P3
D788P3
D987P3
D988P3
R.P.M.
15 300
13 200
13 200
12 200
12 200
12 200
12 200
10 500
10 500
6 600
6 600
Box
25
25
10
25
10
25
10
25
10
25
10
Ctn
100
100
40
100
40
100
40
40
40
This high quality specialty wheel has been
specifically reinforced as a combination wheel
to safely permit both cutting and light grinding.
This wheel is highly recommended for the
pipeline industry for cutting or grinding beads
and joint welds.
Applications:
Pipeline, Structural steel, Sheet metal,
Ferrous metals, Stainless steel.
Ctn
100
40
100
40
40
40
GENERAL PURPOSE,
EXTRA LONG LIFE
Zirconium oxide grain wheels provide superior
stock removal combined with exceptional
wheel life.
Applications:
Structural steel, Sheet metal, Ferrous metals,
Stainless steel, Pipeline.
Kombination "zirconium" metal and stainless steel
Type 27
Dimensions
4-1/2" x 1/8" x 7/8"
4-1/2" x 1/8" x 5/8" -11
5" x 1/8" x 7/8"
5" x 1/8" x 5/8" -11
7" x 1/8" x 7/8"
7" x 1/8" x 5/8" -11
9" x 1/8" x 7/8"
9" x 1/8" x 5/8" -11
Code
D287Z3
D288Z3
D587Z3
D588Z3
D787Z3
D788Z3
D987Z3
D988Z3
R.P.M.
13 200
13 200
12 200
12 200
10 500
10 500
6 600
6 600
Box
25
10
25
10
25
10
25
10
Kombination cast iron
Type 27
Dimensions
7" x 1/8" x 7/8"
7" x 1/8" x 5/8" -11
9" x 1/8" x 7/8"
9" x 1/8" x 5/8" -11
8
Code
D787T3
D788T3
D987T3
D988T3
R.P.M.
10 500
10 500
6 600
6 600
Box
25
10
25
10
Ctn
40
40
FAST AND HIGH STOCK REMOVAL
Aluminium oxide and silicon carbide grains have
been combined to produce a high performance
wheel for the foundry industry. Can be used for
both cutting and light grinding.
Applications:
Cast iron, Bronze, Steel castings, Brass.
1
DEPRESSED CENTER CUT-OFF WHEELS
Precicut stainless steel and metal
Dimensions
4" x .045" x 5/8"
4-1/2" x .045" x 7/8"
5" x .045" x 7/8"
6" x .060" x 7/8"
7" x .060" x 7/8"
9" x 1/16" x 7/8"
9" x 1/16" x 5/8" -11
Code
D405Q
D207Q
D507Q
D607Q
D707Q
D917Q
D918Q
R.P.M.
19 000
13 200
12 200
10 000
8 600
6 600
6 600
Box
25
25
25
25
25
25
10
Code
D405M
D207M
D507M
D607M
D707M
R.P.M.
19 000
13 200
12 200
10 000
8 600
Box
25
25
25
25
25
Metacut metal and stainless steel
Dimensions
4" x .045" x 5/8"
4-1/2" x .045" x 7/8"
5" x .045" x 7/8"
6" x .060" x 7/8"
7" x .060" x 7/8"
Type 27
Ctn
200
200
200
-
EXTRA LONG LIFE,
FAST AND COOL CUTTING
Specially designed for high performance on stainless
steel. These thin cut-off wheels were specifically designed
to provide a faster and cleaner cut when cutting stainless
steel and other hard metal products. The fiberglass
reinforcements make the wheel safer to use, while staying
flexible enough to withstand lateral pressure.
Applications:
Stainless steel, Extremely hard metals, Ferrous metals,
High tensile alloy.
Type 27
Ctn
200
200
200
-
EXTRA LONG LIFE,
Specially designed for high performance on metal.
These thin cut-off wheels were specifically designed to
provide a faster and cleaner cut when cutting metal. The
fiberglass reinforcements make the wheel safer to use,
while staying flexible enough to withstand lateral pressure.
Applications:
Structural steel, Sheet metal, Ferrous metals, Pipe, Rebar,
Stainless steel.
Kompetitor metal and stainless steel
Type 27
Dimensions
4" x .045" x 5/8"
4-1/2" x .045" x 7/8"
5" x .045" x 7/8"
6" x .060" x 7/8"
7" x .060" x 7/8"
Code
D405KR
D207KR
D507KR
D607KR
D707KR
R.P.M.
19 000
13 200
12 200
10 000
8 600
Box
50
50
50
50
50
Ctn
200
200
200
-
GENERAL PURPOSE,
FAST CUTTING
Made with aluminium oxide, this economically priced
wheel provides safety and fast cutting speed.
Applications:
Structural steel, Pipe, Rebar, Welds, Ferrous metals,
Stainless steel.
Alucut aluminium
Type 27
Dimensions
4" x .045" x 5/8"
4-1/2" x .045" x 7/8"
5" x .045" x 7/8"
6" x .060" x 7/8"
7" x .060" x 7/8"
Code
D405A
D207A
D507A
D607A
D707A
R.P.M.
19 000
13 200
12 200
10 000
8 600
Box
25
25
25
25
25
Ctn
200
200
200
-
LONG LIFE, FAST
CUTTING AND CLOG RESISTANT
Specially designed for high performance on nonferrous metals. These thin cut-off wheels were specifically designed to provide a fast and clog-free cut when
cutting non-ferrous metals. The fiberglass reinforcements
make the wheel safer to use, while staying flexible enough
to withstand lateral pressure.
Applications:
9
1
Type 27
Dimensions
3" x 1/8" x 3/8"
4" x 1/8" x 3/8"
4" x 1/8" x 5/8"
4-1/2" x 3/32" x 7/8"
4-1/2" x 1/8" x 7/8"
4-1/2" x 1/8" x 5/8"-11
5" x 3/32" x 7/8"
5" x 1/8" x 7/8"
5" x 1/8" x 5/8"-11
6" x 1/8" x 7/8"
6" x 1/8" x 5/8"-11
7" x 3/32" x 7/8"
7" x 1/8" x 7/8"
7" x 1/8" x 5/8"-11
9" x 1/8" x 7/8"
9" x 1/8" x 5/8"-11
Code
D383R
D483R
D485R
D237R
D287R
D288R
D537R
D587R
D588R
D687R
D688R
D737R
D787R
D788R
D987R
D988R
R.P.M.
20 300
15 300
15 300
13 200
13 200
13 200
12 200
12 200
12 200
10 000
10 000
8 600
8 600
8 600
6 600
6 600
Box
25
25
25
25
25
10
25
25
10
25
10
25
25
10
25
10
Ctn
100
100
100
100
40
100
100
40
40
40
This depressed center cut-off wheel has been
specifically developed using high quality
aluminium oxide grain to obtain high performance
and long life in cutting.
Applications:
Structural steel, Sheet metal, Ferrous metals.
Type 27
Dimensions
4-1/2" x 1/8" x 7/8"
4-1/2" x 1/8" x 5/8"-11
5" x 1/8" x 7/8"
5" x 1/8" x 5/8"-11
6" x 1/8" x 7/8"
6" x 1/8" x 5/8"-11
7" x 1/8" x 7/8"
7" x 1/8" x 5/8"-11
9" x 1/8" x 7/8"
9" x 1/8" x 5/8"-11
Code
D287C
D288C
D587C
D588C
D687C
D688C
D787C
D788C
D987C
D988C
R.P.M.
13 200
13 200
12 200
12 200
10 000
10 000
8 600
8 600
6 600
6 600
Box
25
10
25
10
25
10
25
10
25
10
Dimensions
4" x 1/8" x 5/8"
4-1/2" x 1/8" x 7/8"
4-1/2" x 1/8" x 5/8"-11
5" x 1/8" x 7/8"
5" x 1/8" x 5/8"-11
6" x 1/8" x 7/8"
6" x 1/8" x 5/8"-11
7" x 1/8" x 7/8"
7" x 1/8" x 5/8"-11
9" x 1/8" x 7/8"
9" x 1/8" x 5/8"-11
Code
D485KR
D287KR
D288KR
D587KR
D588KR
D687KR
D688KR
D787KR
D788KR
D987KR
D988KR
R.P.M.
15 300
13 200
13 200
12 200
12 200
10 000
10 000
8 600
8 600
6 600
6 600
Box
25
25
25
25
25
25
10
25
10
25
10
Ctn
100
40
100
40
40
40
This depressed center cut-off wheel is formulated
with silicon carbide grain to obtain excellent
cutting results on non-ferrous metals. For use on
angle grinders.
Applications:
Kompetitor metal
Type 27
10
Ctn
100
100
100
40
40
GENERAL PURPOSE,
FAST CUTTING
This economically priced depressed center cut-off
wheel, made of aluminium oxide, provides safety
and exceptional cut rate.
Applications:
1
Type 27
Dimensions
5" x 3/4" x 7/8"
6" x 5/8" x 7/8"
Code
D577C
D667C
R.P.M.
12 200
10 000
Box
10
10
Ctn
40
40
Type 28
7" x 1/2" x 7/8"
E727C
8 600
25
-
GENERAL PURPOSE GRINDING
Silicon carbide grain has been used in the formulation of
this wheel to provide exceptional grinding results on
concrete ceilings and floors
Applications:
Concrete ceilings and floors.
Kompetitor concrete
Type 27
Dimensions
4" x 1/8" x 5/8"
4-1/2" x 1/8" x 7/8"
4-1/2" x 1/8" x 5/8"-11
5" x 1/8" x 7/8"
5" x 1/8" x 5/8"-11
7" x 1/8" x 7/8"
7" x 1/8" x 5/8"-11
9" x 1/8" x 7/8"
9" x 1/8" x 5/8"-11
Code
D485KC
D287KC
D288KC
D587KC
D588KC
D787KC
D788KC
D987KC
D988KC
R.P.M.
15 300
13 200
13 200
12 200
12 200
8 600
8 600
6 600
6 600
Box
25
25
25
25
25
25
10
25
10
Dimensions
4" x 3/32" x 5/8"
4-1/2" x 3/32" x 7/8"
4-1/2" x 3/32" x 5/8"-11
5" x 3/32" x 7/8"
5" x 3/32" x 5/8"-11
6" x 3/32" x 7/8"
6" x 3/32" x 5/8"-11
7" x 3/32" x 7/8"
7" x 3/32" x 5/8"-11
9" x 3/32" x 7/8"
9" x 3/32" x 5/8"-11
Code
D435V
D237V
D238V
D537V
D538V
D637V
D638V
D737V
D738V
D937V
D938V
R.P.M.
15 300
13 200
13 200
12 200
12 200
10 000
10 000
8 600
8 600
6 600
6 600
Box
25
25
10
25
10
25
10
25
10
25
10
Code
D435X
D237X
D238X
D537X
D538X
D737X
D738X
D987X
D988X
R.P.M.
15 300
13 200
13 200
12 200
12 200
8 600
8 600
6 600
6 600
Box
25
25
10
25
10
25
10
25
10
Ctn
100
100
100
40
40
GENERAL PURPOSE, FAST CUTTING
This economically priced depressed center cut-off
wheel, made with silicon carbide, provides safety
and exceptional cut rate.
Applications:
Supra metal
Type 27
Dimensions
4" x 3/32" x 5/8"
4-1/2" x 3/32" x 7/8"
4-1/2" x 3/32" x 5/8"-11
5" x 3/32" x 7/8"
5" x 3/32" x 5/8"-11
7" x 3/32" x 7/8"
7" x 3/32" x 5/8"-11
9" x 1/8" x 7/8"
9" x 1/8" x 5/8"-11
Ctn
100
100
40
100
40
40
40
Superior quality aluminium oxide grains combined
with a special formula enables us to produce a
longer lasting cutting wheel that develops less
dust when cutting all types of ferrous metals.
Applications:
Type 27
Ctn
100
100
40
100
40
40
40
This depressed center cut-off wheel has been
designed to give exceptional results when cutting
stainless steel. Special white aluminium oxide
grain is used to avoid overheating, glazing and
discoloration. For use on angle grinders.
Applications:
Ferrous metals.
11
1
CUT-OFF WHEELS FOR ANGLE GRINDERS
Ultracut stainless steel and metal
Dimensions
4-1/2" x .040" x 7/8"
5" x .040" x 7/8"
6" x .040" x 7/8"
Type 1
Code
M207U
M507U
M607U
R.P.M.
13 200
12 200
10 000
Box
25
25
25
Code
M207SI
M507SI
R.P.M.
13 200
12 200
Box
25
25
Ctn
200
200
200
Specially designed for high performance on
stainless steel. These ultra thin cut-off wheels
were specifically designed to provide a fast and
clean cut when cutting stainless steel and other
hard metal products. The fiberglass reinforcements make the wheel safer to use, while staying
Applications:
Stainless steel, Extremely hard metals, Ferrous
metals, High tensile alloy.
Super Inox stainless steel and metal
Type 1
Dimensions
4-1/2" x .045" x 7/8"
5" x .045" x 7/8"
Ctn
200
200
LONG LIFE, FAST AND COOL
CUTTING
The newest addition to our line of thin cut-off
wheels. These premium wheels have been
specifically developed for heavy-duty metal and
stainless steel applications. The formulation
provides a longer lasting wheel. They are also
heavily reinforced to provide additional safety
under extreme cutting conditions.
Applications:
metals, High tensile alloys.
Precicut stainless steel and metal
Type 1
Dimensions
4" x .045" x 5/8"
4-1/2" x .045" x 7/8"
5" x .045" x 7/8"
6" x .045" x 7/8"
7" x .045" x 7/8"
12
Code
M405Q
M207Q
M507Q
M607Q
M707Q
R.P.M.
19 000
13 200
12 200
10 000
8 600
Box
25
25
25
25
25
Ctn
200
200
200
-
CUTTING
Specially designed for fast cutting on stainless
steel. These thin cut-off wheels were specifically
designed to provide a faster and cleaner cut when
cutting stainless steel and other hard metal
products. The fiberglass reinforcements make the
wheel safer to use, while staying flexible enough to
withstand lateral pressure.
Applications:
metals, High tensile alloy.
1
Metacut metal and stainless steel
Dimensions
4" x .045" x 5/8"
4-1/2" x .045" x 7/8"
5" x .045" x 7/8"
6" x .045" x 7/8"
7" x .045" x 7/8"
Code
M405M
M207M
M507M
M607M
M707M
R.P.M.
19 000
13 200
12 200
10 000
8 600
Dimensions
4" x .045" x 5/8"
4-1/2" x .045" x 7/8"
5" x .045" x 7/8"
6" x .045" x 7/8"
7" x .045" x 7/8"
Type 1
Box
25
25
25
25
25
Ctn
200
200
200
-
CUTTING
metal. These thin cut-off wheels were specifically
designed to provide a fast and clean cut when
cutting metal. The fiberglass reinforcements
make the wheel safer to use, while staying
Applications:
Structural steel, Sheet metal, Ferrous metals,
Pipe, Rebar, Stainless steel.
Type 1
Code
M405KR
M207KR
M507KR
M607KR
M707KR
R.P.M.
19 000
13 200
12 200
10 000
8 600
Alucut aluminium
Box
50
50
50
50
50
Ctn
200
200
200
-
One of our most economically priced cutting wheels.
Provides safety and a good cut rate.
Applications:
Structural steel, Sheet metal, Ferrous metals, Pipe,
Rebar, Stainless steel.
Type 1
Dimensions
4" x .045" x 5/8"
4-1/2" x .045" x 7/8"
5" x .045" x 7/8"
6" x .045" x 7/8"
7" x .045" x 7/8"
Code
M405A
M207A
M507A
M607A
M707A
R.P.M.
19 000
13 200
12 200
10 000
8 600
Box
25
25
25
25
25
Ctn
200
200
200
-
LONG LIFE, FAST
non- ferrous metals. These thin cut-off wheels
clog-free cut when cutting non-ferrous metals.
The fiberglass reinforcements make the wheel
safer to use, while staying flexible enough to
withstand lateral pressure.
Applications:
13
1
Type 1
Dimensions
4" x 3/32" x 5/8"
4-1/2" x 3/32" x 7/8"
5" x 3/32" x 7/8"
6" x 3/32" x 7/8"
7" x 3/32" x 7/8"
9" x 3/32" x 7/8"
Code
M435R
M237R
M537R
M637R
M737R
M937R
R.P.M.
15 300
13 200
12 200
10 000
8 600
6 600
Dimensions
4" x 3/32" x 5/8"
4-1/2" x 3/32" x 7/8"
5" x 3/32" x 7/8"
7" x 1/8" x 7/8"
9" x 1/8" x 7/8"
Ctn
100
100
100
-
GENERAL PURPOSE,
LONG LIFE
This flat cut-off wheel has been specially
reinforced for freehand cutting with angle grinders.
Applications:
Type 1
Code
M435C
M237C
M537C
M787C
M987C
R.P.M.
15 300
13 200
12 200
8 600
6 600
Kompetitor metal
Box
25
25
25
25
25
Ctn
100
100
100
-
GENERAL PURPOSE,
LONG LIFE
This flat cut-off wheel has been specially
reinforced for freehand cutting with angle grinders.
Applications:
Type 1
Dimensions
4" x 3/32" x 5/8"
4-1/2" x 3/32" x 7/8"
5" x 3/32" x 7/8"
Code
M435KR
M237KR
M537KR
R.P.M.
15 300
13 200
12 200
Kompetitor concrete
Box
25
25
25
Ctn
100
100
100
GENERAL PURPOSE,
FAST CUTTING
Made with aluminium oxide, this wheel is the
economical choice for safe and fast cutting.
Applications:
Structural steel, Pipe, Rebar, Welds, Ferrous metals.
Type 1
Dimensions
4" x 3/32" x 5/8"
4-1/2" x 3/32" x 7/8"
5" x 3/32" x 7/8"
14
Box
25
25
25
25
25
25
Code
M435KC
M237KC
M537KC
R.P.M.
15 300
13 200
12 200
Box
25
25
25
Ctn
100
100
100
GENERAL PURPOSE,
FAST CUTTING
Made with silicon carbide, this wheel is the
economical choice for safe and fast cutting.
Applications:
1
CUT-OFF WHEELS FOR CIRCULAR SAWS
Type 1
Dimensions
6" x 3/32" x N -5/8"
7" x 3/32" x N -5/8"
8" x 3/32" x N -5/8"
10" x 3/32" x 5/8"
Code
M636R
M736R
M836R
M135R
R.P.M.
10 000
8 600
7 500
6 100
Dimensions
7" x 1/8" x N -5/8"
8" x 1/8" x N -5/8"
10" x 1/8" x 5/8"
Ctn
-
This wheel has been designed to obtain excellent
results with circular saws.
Applications:
Type 1
Code
M786C
M886C
M185C
R.P.M.
8 600
7 500
6 100
Dimensions
6" x 1/16" x 5/8"
7" x 1/16" x 5/8"
8" x 1/16" x 5/8"
Box
25
25
25
10
Box
25
25
10
Ctn
-
This wheel is designed to obtain excellent results
with circular saws on non-ferrous metals.
Applications:
Non-ferrous metals.
Type 1
Code
M615X
M715X
M815X
R.P.M.
10 000
8 600
7 500
Kompetitor metal
Box
25
25
25
Ctn
-
This wheel has been designed to obtain excellent
results with circular saws.
Applications:
Ferrous metals.
Type 1
Dimensions
7" x 3/32" x N -5/8"
8" x 3/32" x N -5/8"
Code
M736KR
M836KR
R.P.M.
8 600
7 500
Box
25
25
Ctn
-
This economically priced wheel has been designed
to obtain good results with circular saws.
Applications:
Kompetitor concrete
Type 1
Dimensions
7" x 1/8" x N -5/8"
8" x 1/8" x N -5/8"
Code
M786KC
M886KC
R.P.M.
8 600
7 500
Box
25
25
Ctn
-
This economically priced wheel is formulated with
silicon carbide grain to obtain fast cutting results
on non-ferrous metals.
Applications:
Non-ferrous metals.
15
1
SMALL WHEELS FOR PENCIL AND DIE GRINDERS
Type 1
Dimensions
2" x 1/4" x 3/8"
2" x 3/8" x 3/8"
2" x 1/2" x 3/8"
2-1/2" x 3/8" x 3/8"
2-1/2" x 1/2" x 3/8"
3" x 1/4" x 3/8"
3" x 3/8" x 3/8"
3" x 1/2" x 3/8"
4" x 1/4" x 3/8"
Code
S243R
S293R
S223R
S193R
S123R
S343R
S393R
S323R
S443R
R.P.M.
31 500
31 500
31 500
24 400
24 400
20 300
20 300
20 300
15 300
Super Inox stainless steel and metal
Dimensions
3" x 1/16" x 3/8"
4" x 1/16" x 3/8"
Ctn
200
200
200
200
200
200
200
200
200
Externally reinforced cutting and grinding wheels
for notching, blending, freehand cutting in
hard-to-reach areas. For use in automotive,
aerospace industries and plant maintenance.
Reinforced to resist lateral pressure.
Applications:
Ferrous metals, Stainless steel.
Type 1
Code
S313SI
S413SI
R.P.M.
25 000
19 000
Zirconium ZA 60 T stainless steel and metal
Dimensions
2" x .035" x 3/8"
2" x 1/16" x 3/8"
2-1/2" x .035" x 3/8"
2-1/2" x 1/16" x 3/8"
2-1/2" x 1/16" x 1/4"
3" x .035" x 1/4"
3" x .035" x 3/8"
3" x 1/16" x 1/4"
3" x 1/16" x 3/8"
3" x 3/32" x 1/4"
3" x 3/32" x 3/8"
3" x 1/8" x 1/4"
3" x 1/8" x 3/8"
4" x .035" x 3/8"
4" x 1/16" x 3/8"
4" x 3/32" x 3/8"
4" x 1/8" x 3/8"
Box
50
50
50
50
50
50
50
50
50
Box
50
50
Ctn
200
200
LONG LIFE, FAST AND COOL CUTTING
The newest addition to our line of thin cut-off
wheels. These premium wheels have been
specifically developed for heavy-duty metal and
stainless steel applications. The formulation
provides a longer lasting wheel. They are also
heavily reinforced to provide additional safety
under extreme cutting conditions.
Applications:
metals, high tensile alloys.
Type 1
Code
S203Z
S213Z
S103Z
S113Z
S114Z
S304Z
S303Z
S314Z
S313Z
S334Z
S333Z
S384Z
S383Z
S403Z
S413Z
S433Z
S483Z
R.P.M.
31 500
31 500
24 400
24 400
24 400
25 000
25 000
25 000
25 000
25 000
25 000
25 000
25 000
19 000
19 000
15 300
15 300
Box
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Ctn
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
A special blend of zirconium grain is used to avoid
overheating, glazing and discoloration. Used for
finishing applications, smooth cutting and bur-free
finish. Recommended for refineries and nuclear
industries.
Applications:
Stainless steel, Hard ferrous metals, Ferrous metals.
ACCESSORIES See page 84.
"MT" SERIES
"B" SERIES
Adaptors for modifying the arbor hole.
To be used with our small cut-off wheels that have
codes beginning with an “S”.
16
1
CUT-OFF WHEELS FOR PORTABLE CHOP-SAWS
Premium PRO MS metal and stainless steel
Dimensions
12" x 3/32" x 1"
14" x 3/32" x 1"
16" x 3/32" x 1"
Type 1
Code
F231MS
F431MS
F631MS
R.P.M.
5 100
4 400
3 800
Box
10
10
10
Ctn
50
50
-
Designed for a fast cut and to avoid glazing on
harder materials. Ideal for a wide variety of shapes
and thicknesses.
Applications:
Ferrous metals, Light or heavier structural steels
and solids.
Type 1
Dimensions
12" x 3/32" x 1"
14" x 3/32" x 1"
16" x 3/32" x 1"
Code
F231R
F431R
F631R
R.P.M.
5 100
4 400
3 800
Dimensions
12" x 3/32" x 1"
14" x 3/32" x 1"
16" x 3/32" x 1"
Ctn
50
50
-
Specifically designed for use on low powered
chop-saws. Created to meet the demands of
production in small gauge steels.
Applications:
Ferrous metals, Light structural steels, Thin wall
tubing and small solids.
Type 1
Code
F231KR
F431KR
F631KR
R.P.M.
5 100
4 400
3 800
Premium C 30 R masonry
Dimensions
12" x 3/32" x 1"
14" x 3/32" x 1"
16" x 3/32" x 1"
Box
10
10
10
Box
10
10
10
Ctn
50
50
-
This economically priced wheel is designed for a
fast cut and helps avoid glazing on harder metals.
Applications:
Ferrous metals, Light and heavier structural steels
and solids.
Type 1
Code
F231C
F431C
F631C
R.P.M.
5 100
4 400
3 800
Box
10
10
10
Ctn
50
50
-
This wheel is made with silicon carbide to cut
non-ferrous metals on low powered chop saws.
Applications:
Non-ferrous metals, Concrete, Masonry, Aluminium,
Cast iron.
17
1
CUT-OFF WHEELS FOR PORTABLE CHOP-SAWS
Studpro metal
Type 1
Dimensions
12" x 3/32" x 1"
14" x 3/32" x 1"
16" x 3/32" x 1"
Code
F231SP
F431SP
F631SP
R.P.M.
5 100
4 400
3 800
Box
10
10
10
Ctn
50
50
-
Applications:
Metal studs, Light ferrous metals, Light structural steels,
Thin rebar, Light gauge metal.
Premium ALU 30 aluminium
Dimensions
12" x 3/32" x 1"
14" x 3/32" x 1"
16" x 3/32" x 1"
Type 1
Code
F231A
F431A
F631A
R.P.M.
5 100
4 400
3 800
Box
10
10
10
Ctn
50
50
-
Applications:
Dimensions
12" x 3/32" x 1"
14" x 3/32" x 1"
16" x 3/32" x 1"
GENERAL PURPOSE,
EXTRA LONG LIFE
STUDPRO chop-saw blades are specifically designed
to cut metal studs used in the construction industry.
They contain a special mixture of abrasive grains to
provide longer life and cooler cutting to outlast all
other wheels used in the same applications.
LONG LIFE, FAST
non-ferrous metals. These new cut-off wheels
clog-free cut when cutting non-ferrous metals.
Type 1
Code
F231X
F431X
F631X
R.P.M.
5 100
4 400
3 800
Box
10
10
10
Ctn
50
50
-
Applications:
Stainless steel, Extremely hard ferrous metal.
COOL AND FAST CUTTING
This wheel has been developed to give exceptional
results on stainless steel. White aluminium oxide
discoloration.
CUT-OFF WHEELS FOR STATIONARY AND «SWING FRAME» MACHINES
Premium AC 24 R3 ductile iron
Dimensions
20" x 3/16" x 1" *
Type 1
Code
F061F3
R.P.M.
3 000
Box
10
Ctn
-
Applications:
Ductile, Cast iron, Concrete lined sewer pipes.
FAST CUTTING, LONG LIFE
A high performance wheel specially developed for
the pipe layer, foundry and waterwork industry.
Premium Z 24 R3 zirconium metal
Type 1
Dimensions
20" x 3/16" x 1" *
Code
F061Z3
R.P.M.
3 000
Box
10
Ctn
-
Applications:
Ferrous metals, Bar stock, Structural steel, solids and tubing.
This wheel is made with zirconium oxide grain for
exceptional wheel life.
* These wheels are manufactured with 3 fiberglass
reinforcements to help avoid wheel breakage when used
on “Swing Frame” machines or other difficult operations.
18
1
CUT-OFF WHEELS FOR STATIONARY AND «SWING FRAME» MACHINES
Premium A 30 N metal and stainless steel
Type 1
Dimensions
10" x 3/32" x 1"
12" x 1/8" x 1"
14" x 5/32" x 1"
16" x 5/32" x 1"
20" x 3/16" x 1"
20" x 3/16" x 1" *
Code
F131N
F281N
F451N
F651N
F061N
F061N3
R.P.M.
6 100
5 100
4 400
3 800
3 000
3 000
Box
10
10
10
10
10
10
Ctn
50
30
-
This wheel has been designed for fast cutting
on high horsepower stationary machines and
general purpose cutting on low powered
stationary machines.
Applications:
Ferrous metals, Light or heavy structural steels,
solids and tubing, Bar stock.
Premium A 30 R metal and stainless steel
Type 1
Dimensions
12" x 1/8" x 1"
14" x 5/32" x 1"
16" x 5/32" x 1"
18" x 3/16" x 1"
20" x 3/16" x 1"
20" x 3/16" x 1" *
Code
F281R
F451R
F651R
F861R
F061R
F061R3
R.P.M.
5 100
4 400
3 800
3 400
3 000
3 000
Box
10
10
10
10
10
10
Ctn
50
30
-
This wheel has been designed for long life and
high performance cutting on high horsepower
stationary machines.
Applications:
Ferrous metals, Structural steel, solids and tubing,
Bar stock.
Type 1
Dimensions
10" x 3/32" x 1"
12" x 1/8" x 1"
14" x 5/32" x 1"
16" x 5/32" x 1"
18" x 3/16" x 1"
20" x 3/16" x 1"
Code
F131X
F281X
F451X
F651X
F861X
F061X
R.P.M.
6 100
5 100
4 400
3 800
3 400
3 000
Box
10
10
10
10
10
10
Ctn
50
30
-
COOL AND FAST CUTTING
This wheel has been developed to give exceptional
results on stainless steel. White aluminium oxide
discoloration.
Applications:
Stainless steel, Extremely hard ferrous metals
Premium C 30 R masonry
Type 1
Dimensions
10" x 1/8" x 1"
12" x 1/8" x 1"
14" x 5/32" x 1"
16" x 5/32" x 1"
18" x 3/16" x 1"
20" x 3/16" x 1"
Code
F181C
F281C
F451C
F651C
F861C
F061C
R.P.M.
6 100
5 100
4 400
3 800
3 400
3 000
Box
10
10
10
10
10
10
Ctn
50
30
-
This wheel is made with silicon carbide to cut
non-ferrous metals.
Applications:
Non-ferrous metals, Cast iron, Aluminium, Masonry.
* These wheels are manufactured with 3 fiberglass
reinforcements to help avoid wheel breakage when used
on swing frame machines or other difficult operations.
19
1
CUT-OFF WHEELS FOR PORTABLE HIGH SPEED POWER SAWS
Kompetitor metal
Type 1
Dimensions
12" x 1/8" x 20 mm
12" x 1/8" x 1"
14" x 1/8" x 20 mm
14" x 1/8" x 1"
Code
X282KR
X281KR
X482KR
X481KR
R.P.M.
6 300
6 300
5 400
5 400
Box
10
10
10
10
Dimensions
12" x 1/8" x 20 mm
12" x 1/8" x 1"
14" x 1/8" x 20 mm
14" x 1/8" x 1"
Code
X282KC
X281KC
X482KC
X481KC
R.P.M.
6 300
6 300
5 400
5 400
Box
10
10
10
10
Ctn
50
50
30
30
This economically priced heavy-duty wheel has
been reinforced for durability, safety and
fast cutting.
Applications: Structural steel, Ferrous metals,
Angle iron, Rebar, Pipe.
Kompetitor concrete
Type 1
Kompetitor asphalt
Dimensions
12" x 5/32" x 20 mm
12" x 5/32" x 1"
14" x 5/32" x 20 mm
14" x 5/32" x 1"
Code
X252KA
X251KA
X452KA
X451KA
R.P.M.
6 300
6 300
5 400
5 400
Box
10
10
10
10
Dimensions
12" x 1/8" x 20 mm
12" x 1/8" x 1"
14" x 1/8" x 20 mm
14" x 1/8" x 1"
Code
X282KF
X281KF
X482KF
X481KF
R.P.M.
6 300
6 300
5 400
5 400
Box
10
10
10
10
Ctn
50
50
30
30
fast cutting.
Applications: Green concrete, Asphalt.
Type 1
sheet metal
Dimensions
12" x 5/32" x 20 mm
12" x 5/32" x 1"
14" x 5/32" x 20 mm
14" x 5/32" x 1"
20
fast cutting.
Applications: Cured concrete, Non-ferrous
metals, Aluminium, Masonry, Block, Stone, Brick.
Type 1
Kompetitor ductile iron
Premium A 24 T
Ctn
50
50
30
30
Ctn
50
50
30
30
been reinforced for durability safety and
fast cutting.
Applications: Ductile, Cast iron, Concrete
lined sewer pipes.
For bushing K002 1”-7/8” see page 83.
Type 1
Code
X252T
X251T
X452T
X451T
R.P.M.
6 300
6 300
5 400
5 400
Box
10
10
10
10
Ctn
50
50
30
30
This wheel is designed for optimum performance
on sheet metal application.
Application: Sheet metal.
1
Type 1
Dimensions
9" x 1/8" x 7/8"
12" x 1/8" x 20 mm
12" x 1/8" x 1"
14" x 1/8" x 20 mm
14" x 1/8" x 20 mm *
14" x 1/8" x 1"
14" x 1/8" x 1" *
16" x 5/32" x 20 mm *
16" x 5/32" x 1" *
Code
X987R
X282R
X281R
X482R
X482R3
X481R
X481R3
X652R3
X651R3
R.P.M.
8 300
6 300
6 300
5 400
5 400
5 400
5 400
4 700
4 700
Box
10
10
10
10
10
10
10
10
10
Ctn
50
50
30
30
30
30
-
This heavy duty aluminium oxide wheel delivers
the durability, safety, speed and long life required
by the rigorous demands of the construction
industry.
Applications:
Structural steel, Pipe, Rebar, Angle iron,
Ferrous metals.
* TRIPLE REINFORCEMENT FOR SAWS WITH HIGH HORSE
POWER MOTOR (EX.: TS760)
Dimensions
9" x 1/8" x 7/8"
12" x 1/8" x 20 mm
12" x 1/8" x 1"
14" x 1/8" x 20 mm
14" x 1/8" x 20 mm *
14" x 1/8" x 1"
14" x 1/8" x 1" *
16" x 5/32" x 20 mm *
16" x 5/32" x 1" *
Type 1
Code
X987C
X282C
X281C
X482C
X482C3
X481C
X481C3
X652C3
X651C3
R.P.M.
8 300
6 300
6 300
5 400
5 400
5 400
5 400
4 700
4 700
Box
10
10
10
10
10
10
10
10
10
Code
X282F
X281F
X482F
X482F3
X481F
X481F3
X651F3
X652F3
R.P.M.
6 300
6 300
5 400
5 400
5 400
5 400
4 700
4 700
Box
10
10
10
10
10
10
10
10
Ctn
50
50
30
30
30
30
-
Made with silicon carbide, this wheel offers top
performance and durability for cutting with portable
gas or electric saws.
Applications:
Cured concrete, Brick, Block, Masonry, Aluminium,
Stone, Non-ferrous metals.
POWER MOTOR (EX.: TS760-K1200)
Premium AC 24 R ductile iron
Type 1
Dimensions
12" x 1/8" x 20 mm
12" x 1/8" x 1"
14" x 1/8" x 20 mm
14" x 1/8" x 20 mm *
14" x 1/8" x 1"
14" x 1/8" x 1" *
16" x 5/32" x 1" *
16" x 5/32" x 20 mm *
Premium C 16 T asphalt
Ctn
50
50
30
30
30
30
-
FAST CUTTING, LONG LIFE
A high performance wheel specially developed for
the pipe layer, foundry and waterwork industry.
Applications:
Ductile, Cast iron, Concrete lined sewer pipes.
POWER MOTOR (EX.: TS760)
Type 1
Dimensions
12" x 5/32" x 20 mm
12" x 5/32" x 1"
14" x 5/32" x 20 mm
14" x 5/32" x 20 mm *
14" x 5/32" x 1"
14" x 5/32" x 1" *
16" x 5/32" x 20 mm *
16" x 5/32" x 1" *
Code
X252A
X251A
X452A
X452A3
X451A
X451A3
X652A3
X651A3
R.P.M.
6 300
6 300
5 400
5 400
5 400
5 400
4 700
4 700
Box
10
10
10
10
10
10
10
10
Ctn
50
50
30
30
30
30
-
CLOG RESISTANT, LONG LIFE
By using a combination of larger grain size and a
more open structure, this wheel will resist clogging
when cutting asphalt or green concrete.
Applications:
Asphalt, Green concrete.
POWER MOTOR (EX.: TS760-K1200)
21
1
PVC pipe
Type 1
Dimensions
12" x 5/32" x 20 mm
12" x 5/32" x 1"
14" x 5/32" x 20 mm
14" x 5/32" x 1"
Code
X252PVC3
X251PVC3
X452PVC3
X451PVC3
R.P.M.
6 300
6 300
5 400
5 400
Box
10
10
10
10
R.P.M.
6 300
6 300
5 400
5 400
4 700
4 700
Box
10
10
10
10
10
10
Rail-Kut A 24 P railroad track and stainless steel
Dimensions
12" x 1/8" x 20 mm
12" x 1/8" x 1"
14" x 1/8" x 20 mm
14" x 1/8" x 1"
16" x 5/32" x 20 mm *
16" x 5/32" x 1" *
Code
X282P
X281P
X482P
X481P
X652P3
X651P3
Ctn
50
50
30
30
Specialy developped for the pvc pipe cutting application.
Applications: A special mix of abrasive grains to allow
cooler cutting of PVC and other plastic pipes. You should
not use the sides of any high speed wheels to grind with.
Type 1
Ctn
50
50
30
30
-
A blend of special abrasive grain is used to provide
fast, clean, bur-free cuts on railroad tracks and similar
large hardened steels.
Applications: Railroad track, Stainless steel, Hard steel.
*
TRIPLE REINFORCEMENT FOR SAWS WITH HIGH HORSE POWER MOTOR
(EX.: TS760)
CUT-OFF WHEELS FOR SAW WITH «SWING FRAME» ATTACHMENT
Rail-Kut A 24 Z zirconium railroad track
Type 1
Dimensions
14" x 1/8" x 1" *
16" x 1/8" x 1" *
Code
X481PZ
X681PZ
R.P.M.
4 800
4 700
Box
10
10
Ctn
30
-
Zirconium oxide grain wheels deliver superior cutting
combined with long wheel life VS conventional cut-off
wheels.
Applications: Railroad track, Stainless steel, Hard steel.
* SPECIFICALLY DESIGNED TO BE USED WITH SWING FRAMES.
CUT-OFF WHEELS FOR ROAD CONSTRUCTION SAWS
Premium C 16 T asphalt
Type 1
Dimensions
14" x 3/16" x 1" (P.H.)
14" x 1/4" x 1" (P.H.)
14" x 3/8" x 1" (P.H.)
16" x 3/16" x 1" (P.H.)
18" x 3/16" x 1" (P.H.)
Code
X460A
X440A
X490A
X660A
X860A
R.P.M.
4 400
4 400
4 400
3 800
3 400
Dimensions
14" x 3/16" x 1" (P.H.)
14" x 1/4" x 1" (P.H.)
14" x 3/8" x 1" (P.H.)
16" x 3/16" x 1" (P.H.)
18" x 3/16" x 1" (P.H.)
Box
10
8
5
10
10
Ctn
30
24
15
-
CLOG RESISTANT, LONG LIFE
Provides fast and clog resistant cutting of asphalt and
green concrete with walk behind saws.
Applications: Asphalt, Green concrete.
Type 1
Code
X460C
X440C
X490C
X660C
X860C
R.P.M.
4 400
4 400
4 400
3 800
3 400
Box
10
8
5
10
10
Ctn
30
24
15
-
Specifically developed for fast and economical cutting
or grooving of cured concrete with walk behind saws.
Applications: Cured concrete, Reinforced concrete.
Kompetitor asphalt / concrete
Type 1
Dimensions
14" x 3/16" x 1" (P.H.)
14" x 3/16" x 1" (P.H.)
22
Code
X460KA
X460KC
R.P.M.
4 400
4 400
Box
10
10
Ctn
30
30
This economically priced heavy-duty wheel has been reinforced
for durability, safety and fast cutting.
Applications: Green concrete, Asphalt, Reinforced
concrete, Cured concrete.
1
CUP WHEELS
A 16 R metal
Dimensions
4" x 2" x 5/8" -11
4" x 2" x 5/8" -11 *
5" x 2" x 5/8" -11
5" x 2" x 5/8" -11 *
6" x 2" x 5/8" -11 *
Code
R425A
RR425A
R525A
RR525A
RR625A
R.P.M.
9 000
9 000
7 200
7 200
6 000
Box
10
10
10
10
10
Ctn
-
Dimensions
4" x 2" x 5/8" -11
4" x 2" x 5/8" -11 *
5" x 2" x 5/8" -11
5" x 2" x 5/8" -11 *
6" x 2" x 5/8" -11 *
Code
R425C
RR425C
R525C
RR525C
RR625C
R.P.M.
9 000
9 000
7 200
7 200
6 000
Box
10
10
10
10
10
Ctn
-
Dimensions
4" x 2" x 5/8" -11
4" x 2" x 5/8" -11 *
5" x 2" x 5/8" -11
5" x 2" x 5/8" -11 *
6" x 2" x 5/8" -11 *
Code
R425F
RR425F
R525F
RR525F
RR625F
R.P.M.
9 000
9 000
7 200
7 200
6 000
Box
10
10
10
10
10
Ctn
-
Dimensions
5" x 2" x 5/8" -11 *
6" x 2" x 5/8" -11 *
Code
RR525Z
RR625Z
R.P.M.
7 200
6 000
Box
10
10
Ctn
-
Specifically formulated with high quality aluminium
oxide grain for rough grinding, cleaning and
removing flashings.
Applications:
Steel, Stainless steel, Ferrous metals.
C 16 R concrete
This wheel is made with silicon carbide grain to
obtain excellent results on concrete.
Applications:
Concrete, Masonry, Stone.
AC 16 T foundry work
Formulated with a combination of aluminium oxide
and silicon carbide grains to resist loading and
glazing in most foundry applications.
Applications:
Cast iron, Bronze, Brass, Steel castings.
ZA 16 R foundry work
GENERAL PURPOSE, EXTRA LONG LIFE
Made with a high quality zirconium mix. You will
obtain excellent results and extremely long life.
Applications:
Cast iron, Bronze, Brass, Steel castings.
* “RR”: CUP WHEELS WITH METAL SAFETY BACK.
23
1
PLUG AND CONE WHEELS
A 20 R metal
Dimensions
1-1/4" x 3" x 3/8" -24
2" x 3" x 5/8" -11
Code
RN533A
RN235A
R.P.M.
29 000
18 100
Box
10
10
Ctn
-
Dimensions
1-1/2" x 3" x 1/2" -13
1-1/2" x 3" x 3/8" -24
1-1/2" x 3" x 5/8" -11
2" x 3" x 5/8" -11
Code
RO132A
RO133A
RO135A
RO235A
R.P.M.
24 100
24 100
24 100
18 100
Box
10
10
10
10
Ctn
-
Plug Type 18
Dimensions
1-1/2" x 2-1/2" x 3/8" -24
1-1/2" x 3" x 5/8" -11
2" x 3" x 5/8" -11
Code
RP113A
RP135A
RP235A
R.P.M.
24 100
24 100
18 100
Box
10
10
10
Ctn
-
Plug Type 18R
Dimensions
1-1/4" x 3" x 3/8" -24
2" x 3" x 5/8" -11
3" x 4" x 5/8" -11
Code
RQ533A
RQ235A
RQ345A
R.P.M.
29 000
18 100
12 100
Box
10
10
10
Ctn
-
Cone Type 16
Cone Type 17
Resin bonded wheels for maximum stock removal
in hard-to-reach confined areas. Excellent for weld
grinding, shaping, blending and deburring.
Applications:
Castings, Stainless steel, Ferrous metals.
SPIRAL RIBBED FLEXIBLE GRINDING DISCS (CONCRETE)
C 16/24 concrete
Dimensions
4-1/2" x 7/8"
5" x 7/8"
7" x 7/8"
Code
H216C
H224C
H516C
H524C
H716C
H724C
Grit
C16
C24
C16
C24
C16
C24
R.P.M.
13 200
13 200
12 200
12 200
8 600
8 600
Box
25
25
25
25
25
25
Ctn
-
R.P.M.
8 600
8 600
8 600
8 600
8 600
8 600
Box
25
25
25
25
25
25
Ctn
100
100
100
100
-
Recommended for use in grinding imperfections on
precast and prestressed concrete and epoxy. The
spiral design and the holes permit the disc to run
cooler which prevents loading and increases
production. Spiral ribbed discs are lightweight and
very aggressive.
Applications:
Concrete, Masonry, Aluminium, Paint.
* USE WITH SPIRAL-COOL BACKING PADS PAGE 84.
FLEXIBLE GRINDING DISCS "AB-FLEX"
Aluminium oxide
Dimensions
4-1/2" x 7/8"
5" x 7/8"
7" x 7/8"
24
Code
I236A
I260A
I536A
I560A
I736A
I760A
Grit
36
60
36
60
36
60
Allows flexibility in grinding, shaping, blending and
finishing operations. Removes and blends a weld in
a one-step operation.
Applications:
Aluminium, Brass, Bronze, Ferrous and non-ferrous
metals, Stainless steel.
2
VITRIFIED ABRASIVES
BENCH, PEDESTAL AND CHAIN SAW SHARPENING WHEELS
A aluminium oxide
Dimensions
A 24
5" x 3/4" x 1"
6" x 3/4" x 1"
L671A
6" x 1" x 1"
L611A
7" x 1" x 1-1/4"
8" x 1" x 1-1/4"
L816A
10" x 1" x 1-1/4"
L116A
12" x 1-1/2" x 1-1/2" L244A
12" x 2" x 1-1/2"
L224A
14" x 2" x 1-1/2"
L324A
A 36
L571B
L671B
L611B
L716B
L816B
L116B
L244B
L224B
L324B
Code/Grit
A 46 A 60
L571C
L671C L671D
L611C L611D
L716D
L816D
L116D
- L244D
- L224D
- L324D
A 80
L571E
L671E
L611E
L716E
L816E
L116E
-
A 120
L671F
L611F
L716F
L816F
L116F
-
R.P.M.
Box
4 900
4 100
4 100
3 600
3 600
2 400
2 000
2 000
1 800
1
1
1
1
1
1
1
1
1
Each wheel is balanced to ensure safe and efficient
grinding of ferrous metals.
Applications:
Steel, Carbon steel, All ferrous metals.
MULTIPLE-SIZED NESTED BUSHINGS INCLUDED.
8C green silicon carbide
Code/Grit
8C 60
8C 100
L671G
L671H
L611G
L611H
L716G
L716H
L816G
L816H
L116G
L116H
Dimensions
6" x 3/4" x 1"
6" x 1" x 1"
7" x 1" x 1-1/4"
8" x 1" x 1-1/4"
10" x 1" x 1-1/4"
R.P.M. Box
4 100
4 100
3 600
3 600
2 400
1
1
1
1
1
Made with green silicon carbide for sharpening
and grinding carbide tools.
Applications:
Carbide tools, Carbide drill bits, Non-ferrous metals.
MULTIPLE-SIZED NESTED BUSHINGS INCLUDED.
A aluminium oxide
Dimensions
140mm x 3.2mm x 12mm
Code
V1403260
V1403860
V1404560
V14532A8
V14547A8
V14560A8
Grit
11A60
11A60
11A60
11A80
11A80
11A80
R.P.M. Box
4 500 1
4 500 1
4 500 1
4 600 1
4 600 1
4 600 1
Specially designed to sharpen chains. Each wheel
is balanced and profiled to ensure precise and
secure sharpening. Designed for grinders such as
Total, Oregon, Windsor, Belsaw, Stihl, etc.
Application:
Chain saws.
Hand and floor rubs
Dimensions
Plain
Fluted
4" x 2" x 2"
Code
K0608
K0600
K0606
K0604
K0680
Grit
C8
C 10
C 16
C 24
C 80
Spec
Plain
Plain
Plain
Plain
Plain
Box
6
6
6
6
6
Ctn
48
48
48
48
48
Dimensions
6" x 2" x 2"
8" x 2" x 2"
Code
K061
K062
Grit
C 24
C 24
Spec
Fluted
Fluted
Box
6
6
Ctn
-
Dimensions
Code
6" x 3" x 1"
K063
8" x 3-1/2" x 1-1/2" K064
Grit
C 24
C 24
Spec
Handle
Handle
Box
1
1
Ctn
5
5
Plain: Used with floor grinding machines to
smooth concrete floors. Wedges included.
Fluted: Used manually to smooth concrete and
remove form marks.
Handle: Used manually to smooth concrete and
remove form marks with the convenience of
a handle.
Applications:
Concrete, Stone, Terazzo, Brick.
Handle
25
2
VITRIFIED ABRASIVES
MOUNTED POINTS
Aluminium oxide Type A
Shape
Dimensions
Code
R.P.M.
Box
A1
3/4" x 2-1/2" x 1/4"
A001P
19 800
5
A3
1" x 2-3/4" x 1/4"
A003P
16 100
5
A4
1-1/4" x 1-1/4" x 1/4"
A004P
30 560
5
A5
3/4" x 1-1/8" x 1/4"
A005P
45 000
5
A 11
7/8" x 2" x 1/4"
A011P
19 860
5
A 12
11/16" X 1-1/4" x 1/4"
A012P
48 000
5
A 14
11/16" x 7/8" x 1/4"
A014P
55 560
5
A 15
1/4" x 1" x 1/4"
A015P
72 750
5
A 21
1" x 1" x 1/4"
A021P
34 500
5
A 24
1/4" x 3/4" x 1/4"
A024P
76 500
5
A 25
1" x 1" x 1/4"
A025P
35 620
5
A 32
1" x 3/4" x 1/4"
A032P
38 200
5
A 36
1-5/8" x 3/8" x 1/4"
A036P
23 520
5
A 37
1-1/4" x 1/4" x 1/4"
A037P
30 560
5
A 38
1" x 1" x 1/4"
A038P
34 500
5
A 39
3/4" x 3/4" x 1/4"
A039P
47 250
5
Made with premium quality aluminium oxide grain
for fine grinding and deburring of ferrous metals.
For use on high speed die grinders.
Applications:
Steel, Iron, All ferrous metals.
Color:
Pink.
Type A
1
3
4
21
15
5
24
11
25
37
15
12
14
32
38
39
Aluminium oxide Type B
Shape
Dimensions
Code
R.P.M.
Box
B 41
5/8" x 5/8" x 1/8"
A041P
63 750
10
B 44
7/32" x 3/8" x 1/8"
A044P
68 400
10
B 52
3/8" x 3/4" x 1/8"
A052P
45 370
10
B 63
1/4" x 3/16" x 1/8"
A063P
71 250
10
B 93
3/16" x 3/16" x 1/8"
A093P
81 370
10
B 111
7/16" x 11/16" x 1/8"
A111P
33 750
10
B 121
1/2" X 1/2" x 1/8"
A121P
45 370
10
B 131
1/2" x 1/2" x 1/8"
A131P
34 500
10
B 134 5/16" x 3/8" x 1/8"
A134P
45 900
10
B 135 1/4" x 1/2" x 1/8"
A135P
60 000
10
B 136 1/4" x 5/16" x 1/8"
A136P
72 520
10
Applications:
Color:
Pink.
Type B
41
44
131
26
52
63 93
134
111
121
135 136
2
VITRIFIED ABRASIVES
MOUNTED POINTS
Aluminium oxide Type W
Shape
Dimensions
Code
R.P.M.
Box
W 145 1/8" x 3/8" x 1/8"
A145P
105 000
10
W 146 1/8" x 1/2" x 1/8"
A146P
105 000
10
W 154 3/16" x 1/2" x 1/8"
A154P
70 500
10
W 160 1/4" x 1/4" x 1/8"
A160P
81 370
10
W 163 1/4" x 1/2" x 1/8"
A163P
60 000
10
W 164 1/4" x 3/4" x 1/8"
A164P
45 900
10
W 168 5/16" x 5/16" x 1/8"
A168P
46 900
10
W 170 5/16" x 1/2" x 1/8"
A170P
43 400
10
W 177 3/8" x 3/4" x 1/4"
A177P
33 750
10
W 179 3/8" x 1-1/4" x 1/4"
A179P
45 750
10
W 185 1/2" x 1/2" x 1/4"
A185P
34 500
5
W 187 1/2" x 1" x 1/4"
A187P
20 620
5
W 188 1/2" x 1-1/2" x 1/4"
A188P
30 370
5
W 196 5/8" x 1" x 1/4"
A196P
35 250
5
W 204 3/4" x 3/4" x 1/4"
A204P
18 900
5
W 205 3/4" x 1" x 1/4"
A205P
34 500
5
W 208 3/4" x 2" x 1/4"
A208P
18 750
5
W 217 1" x 3/8" x 1/4"
A217P
38 200
5
W 220 1" x 1" x 1/4"
A220P
25 500
5
W 221 1" x 1-1/2" x 1/4"
A221P
19 120
3
W 225 1-1/4" x 1/4" x 1/4"
A225P
30 560
3
W 236 1-1/2" x 1/2" x 1/4"
A236P
25 470
3
W 237 1-1/2" x 1" x 1/4"
A237P
22 500
3
W 238 1-1/2" x 1-1/2" x 3/8"
A238P
15 600
3
W 242 2" x 1" x 1/4"
A242P
19 100
3
Applications:
Color:
Pink.
Type W
1
2
3
4
5
6
27
3
COATED ABRASIVES
RESIN FIBER DISCS
Types "C" and "A" aluminium oxide Type "S" silicon carbide
Type C
Dimensions
4" x 5/8"
Type A
4-1/2" x 7/8"
Type S
5" x 7/8"
7" x 7/8"
9" x 7/8"
28
Code
Z416C
Z424C
Z436C
Z450C
Z460C
Z480C
Z410C
Z412C
Z216C
Z224C
Z236C
Z250C
Z260C
Z280C
Z210C
Z212C
Z516C
Z524C
Z536C
Z550C
Z560C
Z580C
Z510C
Z512C
Z716C
Z724C
Z736C
Z750C
Z760C
Z780C
Z710C
Z712C
Z916C
Z924C
Z936C
Z950C
Z960C
Z980C
Z910C
Grit
16
24
36
50
60
80
100
120
16
24
36
50
60
80
100
120
16
24
36
50
60
80
100
120
16
24
36
50
60
80
100
120
16
24
36
50
60
80
100
Box
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
Ctn
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
ALUMINIUM OXIDE Type C,
GENERAL PURPOSE
A general purpose disc for fast grinding of steel,
welds, metal finishing and structural fabrication.
Available in 4", 4-1/2", 5", 7" and 9".
ALUMINIUM OXIDE Type A,
LONG LIFE
A premium quality disc designed for long life, high
stock removal and cool cutting action on metal
and welds.
Available in 4", 4-1/2", 5", 7" and 9".
Product code: Replace the last letter of the code
with an "A" (e.g. Z 724 A).
SILICON CARBIDE Type S,
GENERAL PURPOSE
A disc for all types of non-ferrous work, designed
to grind aluminium, brass, ceramic, stone,
magnesium, gray iron, etc.
Available in 5" and 7".
Product code: Replace the last letter of the code
with an "S" (e.g. Z 724 S).
Colour Identification
Type C: Red
Type A: Maroon
Type S: Black
* For backing pads, see ACCESSORIES on
page 84-85.
3
COATED ABRASIVES
RESIN FIBER DISCS
Zirconium "Z"
Dimensions
4" x 5/8"
Type PMD
4-1/2" x 7/8"
Type SMD
5" x 7/8"
7" x 7/8"
9" x 7/8"
Code
Grit
Box
Ctn
Z416Z
16
25
100
Z424Z
24
25
100
Z436Z
36
25
100
Z450Z
50
25
100
Z460Z
60
25
100
Z480Z
80
25
100
Z216Z
16
25
100
Z224Z
24
25
100
Z236Z
36
25
100
Z250Z
50
25
100
Z260Z
60
25
100
Z280Z
80
25
100
Available in 4-1/2", 5", and 7" grits 24 to 80.
Z516Z
16
25
100
Z524Z
24
25
100
Product code : Replace the last letter of the code
with "PMD" (e.g. Z236PMD).
Z536Z
36
25
100
Z550Z
50
25
100
Z560Z
60
25
100
Z580Z
80
25
100
Z716Z
16
25
100
Z724Z
24
25
100
Z736Z
36
25
100
Z750Z
50
25
100
Z760Z
60
25
100
Z780Z
80
25
100
Z916Z
16
25
100
Z924Z
24
25
100
Z936Z
36
25
100
Z950Z
50
25
100
Z960Z
60
25
100
Z980Z
80
25
100
ZIRCONIUM Type "Z",
EXTRA LONG LIFE
A top quality zirconium disc for high speed
grinding and superior stock removal on all steels
including stainless. The best performance disc for
weld removal. Extra long life.
Available in 4", 4-1/2", 5", 7" and 9".
PREMIUM CERAMIC/ALUMINIUM
OXIDE BLEND Type "PMD"
Heat treated aluminium and ceramic blend
includes harmless additives for extended disc life.
Ideal for exotic metals, stainless and other ferrous
metals.
LUBRICANT COATED ALUMINIUM
OXIDE Type "SMD"
Special grinding additives are used to delay disc
loading in soft metals. Ideal for bronze, brass and
aluminium.
Available in 4-1/2", 5", and 7" grits 16 to 120.
Product code : Replace the last letter of the code
with "SMD" (e.g. Z236SMD).
Colour Identification
Type Z: Blue.
Type PMD: Dark red.
Type SMD: Orange.
* For backing pads, see ACCESSORIES on
page 84-85.
29
3
COATED ABRASIVES
FLAP DISCS "POLY-FLAP"
Zirconium Type 27 fiberglass backing
Dimensions
4" x 5/8"
4-1/2" x 7/8
5" x 7/8"
7" x 7/8"
Code
WF440Z
WF460Z
WF480Z
WF412Z
WF240Z
WF260Z
WF280Z
WF212Z
WF540Z
WF560Z
WF580Z
WF512Z
WF740Z
WF760Z
WF780Z
WF712Z
T-27
Grit
40
60
80
120
40
60
80
120
40
60
80
120
40
60
80
120
R.P.M.
15 300
15 300
15 300
15 300
13 200
13 200
13 200
13 200
13 200
13 200
13 200
13 200
8 600
8 600
8 600
8 600
Box
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Ctn
40
40
40
40
40
40
40
40
-
Dimensions
4-1/2" x 7/8"
5" x 7/8"
7" x 7/8"
Code
WF240Z9
WF260Z9
WF280Z9
WF212Z9
WF540Z9
WF560Z9
WF580Z9
WF512Z9
WF740Z9
WF760Z9
WF780Z9
WF712Z9
0-15°
Our top quality ZIRCONIUM grain provides superior stock
removal and a fast and cool cutting action.
Experience in the field on a wide variety of
applications and metals has shown that zirconium
oxide substancially outperforms aluminium oxide.
Applications:
Ferrous and non-ferrous materials, Stainless steel, High
tensile steels, Aluminium, Structural steel, Cast iron,
Plastic, Fiberglass, Brass.
4-1/2”, 7” available with 5/8”-11 Zinc hubs add
"H" to the code. (e.g. WF260ZH)
4-1/2”, 5”, 5/8”-11 with EZ SPIN adaptors add
"EZ" to the code. (e.g. WF260ZEZ)
T-29
Grit
40
60
80
120
40
60
80
120
40
60
80
120
R.P.M.
13 200
13 200
13 200
13 200
12 200
12 200
12 200
12 200
8 600
8 600
8 600
8 600
Box
10
10
10
10
10
10
10
10
10
10
10
10
Ctn
40
40
40
40
-
15°-25°
Our top quality ZIRCONIUM grain provides superior
stock removal and a fast and cool cutting action.
Experience in the field on a wide variety of
applications and metals has shown that zirconium
oxide substancially outperforms aluminium oxide.
Applications:
Ferrous and non-ferrous materials, Stainless steel,
High tensile steels, Aluminium, Structural steel, Cast
iron, Plastic, Fiberglass, Brass.
"POLY-FLAP" DISCS
"POLY-FLAP" discs have been developed primarily to
replace sanding discs and to provide a one-step
operation, from grinding welds to detailed blending and
finishing. The improved reinforced fiberglass backing
plate wears down evenly with the abrasive flaps while
new surfaces are exposed to maintain a uniform cutting
action. The discs fit directly onto your machine.
4-1/2”, 5”, 7” available with 5/8”-11, add "H"
to the code. (e.g. WF260Z9H)
"EZ" to the code. (e.g. WF260Z9EZ)
30
3
COATED ABRASIVES
FLAP DISCS "JUMBO POLY-FLAP"
T-29
Dimensions
4-1/2" x 7/8"
5" x 7/8"
7" x 7/8"
Code
WFJ240Z9
WFJ260Z9
WFJ280Z9
WFJ540Z9
WFJ560Z9
WFJ580Z9
WFJ740Z9
WFJ760Z9
WFJ780Z9
Grit
40
60
80
40
60
80
40
60
80
R.P.M.
13 200
13 200
13 200
12 200
12 200
12 200
8 600
8 600
8 600
Box
10
10
10
10
10
10
10
10
10
Ctn
-
BO
M
U
J
15°-25°
These jumbo flap discs are made with the same top quality
ZIRCONIUM grain as our thinner flap discs. They provide
even more life because of the amount of paper used on
the discs. Experience in the field on a wide variety of
applications and metals has shown that zirconium oxide
outperforms aluminium oxide by a good margin.
Applications:
High tensile steels, Aluminium, Structural steel,
Cast iron, Plastic, Fiberglass, Brass.
4-1/2”, 5”, 7” available with 5/8”-11 Zinc hubs
add "H" to the code. (e.g. WFJ260Z9H)
"EZ" to the code. (e.g. WFJ260Z9EZ)
FLAP DISCS "POLY-FLAP II"
Zirconium Type 27 plastic backing
Dimensions
4-1/2" x 7/8"
5" x 7/8"
Code
WP240Z
WP260Z
WP280Z
WP212Z
WP540Z
WP560Z
WP580Z
WP512Z
T-27
Grit
40
60
80
120
40
60
80
120
R.P.M.
13 200
13 200
13 200
13 200
12 200
12 200
12 200
12 200
Box
10
10
10
10
10
10
10
10
Ctn
40
40
40
40
40
40
40
40
0-15°
Our top quality ZIRCONIUM grain provides superior stock
removal and a fast and cool cutting action. Experience in
the field on a wide variety of applications and metals has
shown that zirconium oxide outperforms aluminium oxide
by a good margin.
Applications:
TIC
S
A
PL KING
BAC
4-1/2”, 5”, available with 5/8”-11 Zinc hubs add
"H" to the code. (e.g. WP260Z9H)
"EZ" to the code. (e.g. WP260ZEZ)
Zirconium plastic backing "Screw-on"
Dimensions
3"
Code
WP340ZF
WP360ZF
WP380ZF
WP312ZF
Grit
40
60
80
120
For mandrel, see page 84. Use with #MF3
R.P.M.
20 000
20 000
20 000
20 000
Box
10
10
10
10
Ctn
40
40
40
40
The zirconium grain plastic backed disc is to be
used on right angle air die grinders for smooth grinding
and enhanced comfort. This smaller sized disc allows
easier access to confined areas.
Applications:
31
3
COATED ABRASIVES
MOUNTED FLAP WHEELS
Aluminium oxide
Dimensions
1" x 3/4" x 1/4"
1" x 1" x 1/4"
1-1/2" x 1" x 1/4"
2" x 3/4" x 1/4"
2" x 1" x 1/4"
3" x 1" x 1/4"
3" x 2" x 1/4"
Code
W076A
W078A
W073A
W016A
W018A
W013A
W116A
W118A
W113A
W112A
W276A
W278A
W273A
W272A
W216A
W218A
W213A
W212A
W316A
W318A
W313A
W312A
W326A
W328A
W323A
W322A
Grit
60
80
120
60
80
120
60
80
120
240
60
80
120
240
60
80
120
240
60
80
120
240
60
80
120
240
Box
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Code
BFL901108
BFL901110
BFL901112
BFL901180
BFL901122
BFL901124
BFL901128
BFL901132
Grit
80A
100A
120A
180A
220A
240A
280A
320A
Box
100
100
100
100
100
100
100
100
Code
BFE901105C
BFE901108M
BFE901112F
Grit
50
80
120
Box
25
50
50
GENERAL PURPOSE,
LONG LIFE
Designed for cleaning, blending, deburring and
shaping of all surfaces. Flaps are tightly packed to
offer smooth operation and extended life.
Applications:
Plastic, Wood, Steel, Ferrous and
non-ferrous materials.
Other sizes and dimensions available upon request.
ALO CUT SHEETS
Alo/Lube cloth
Dimensions
9" x 11"
GENERAL PURPOSE
Aluminium oxide sheets with a lubricant to resist
loading and extend life. Perfect for paints and
primers.
Applications:
Paint, primers and Gelcoat.
Emery cloth
Dimensions
9" x 11"
32
GENERAL PURPOSE
Designed for rust and corrosion removal or metal
sanding. Cloth backing makes it strong and durable.
For deburring and preparing metal surfaces.
Applications:
Rust, metal, deburring.
3
COATED ABRASIVES
ALO CUT SHEETS
Aluminium oxide paper
Dimensions
9" x 11"
Code
BFD901104
BFD901106
BFD901108
BFC901110
BFC901112
BFC901115
BFC901118
BFC901122
BFC901124
BFC901128
Grit
40D
60D
80D
100C
120C
150C
180C
220C
240C
280C
Box
50
50
100
100
100
100
100
100
100
100
Code
BFX901110
BFX901112
BFX901115
BFW901118
BFW901122
BFW901124
BFW901132
BFW901140
BFW901160
BFW901200
Grit
100C
120C
150C
180A
220A
240A
320A
400A
600A
1220A
Box
50
50
50
50
50
50
50
50
50
25
Code
BFT901104
BFT901105
BFT901106
BFT901108
BFT901110
BFT901112
BFT901115
BFT901118
BFT901122
BFT901124
BFT901132
Grit
40
50
60
80
100
120
150
180
220
240
320
Box
50
50
50
50
50
50
50
50
50
50
50
GENERAL PURPOSE
Made with extremely hard and durable aluminium
oxide grain for high resistance to wear. Open coat
to resist loading.
Applications:
Ferrous and non-ferrous materials, Plastic,
Fiberglass, Wood, Paint removal, Metals.
Silicon carbide paper waterproof (wet or dry)
Dimensions
9" x 11"
GENERAL PURPOSE
Made with extremely hard, sharp and brittle silicon
carbide grain for ultra fine finishing during wet or
dry sanding. Provides a high quality finish.
Applications:
Non-ferrous materials, Glass, Paint, Fiberglass,
Body filler, Stone, Soft wood.
Aluminium oxide cloth
Dimensions
9" x 11"
Category A: Light and very flexible paper backing.
Category C: Heavy duty paper backing.
Category D: Extremely resistant paper backing for heavy duty applications.
GENERAL PURPOSE
Aluminium oxide grain, resin on resin coated on a
heavy duty cloth backing to obtain extra long life.
Water resistant.
Applications:
Ferrous and non-ferrous materials, Aluminium,
Wood, Copper, Plastic.
Coarse: Grit 40
Medium: Grit 80
Fine: Grits 100 and finer
33
3
COATED ABRASIVES
GENERAL PURPOSE ABRASIVE BELTS
Dimensions
3" x 18"
3" x 21"
3" x 24"
4" x 24"
4" x 36"
6" x 48"
34
Code
CS301802
CS301803
CS301804
CS301805
CS301806
CS301808
CS301810
CS301812
CS302102
CS302103
CS302104
CS302105
CS302106
CS302108
CS302110
CS302112
CS302402
CS302403
CS302404
CS302405
CS302406
CS302408
CS302410
CS302412
CS402402
CS402403
CS402404
CS402405
CS402406
CS402408
CS402410
CS402412
CS403602
CS403603
CS403604
CS403605
CS403606
CS403608
CS403610
CS403612
CS604802
CS604803
CS604804
CS604805
CS604806
CS604808
CS604810
CS604812
Grit
24
36
40
50
60
80
100
120
24
36
40
50
60
80
100
120
24
36
40
50
60
80
100
120
24
36
40
50
60
80
100
120
24
36
40
50
60
80
100
120
24
36
40
50
60
80
100
120
Box
5
5
10
10
10
10
10
10
5
5
10
10
10
10
10
10
5
5
10
10
10
10
10
10
5
5
10
10
10
10
10
10
5
5
10
10
10
10
10
10
5
5
10
10
10
10
10
10
GENERAL PURPOSE
ABMAST uses a butt splice in which belts are
butted together and joined by high strength tape.
This allows belts to run in either direction for
greater belt life and smooth running.
Applications:
Ferrous and non-ferrous materials, Wood, Metal,
Plastic, Fiberglass.
3
COATED ABRASIVES
ZIRCONIUM ABRASIVE BELTS
Zirconium oxide cloth belts
Dimensions
1/4" x 18"
1/4" x 24"
3/8" x 13"
1/2" x 12"
1/2" x 18"
1/2" x 24"
Code
CZ02018036
CZ02018040
CZ02018050
CZ02018060
CZ02018080
CZ02018100
CZ02018120
CZ02024036
CZ02024040
CZ02024050
CZ02024060
CZ02024080
CZ02024100
CZ02024120
CZ03013036
CZ03013040
CZ03013050
CZ03013060
CZ03013080
CZ03013100
CZ03013120
CZ04012036
CZ04012040
CZ04012050
CZ04012060
CZ04012080
CZ04012100
CZ04012120
CZ04018036
CZ04018040
CZ04018050
CZ04018060
CZ04018080
CZ04018100
CZ04018120
CZ04024036
CZ04024040
CZ04024050
CZ04024060
CZ04024080
CZ04024100
CZ04024120
Grit
36
40
50
60
80
100
120
36
40
50
60
80
100
120
36
40
50
60
80
100
120
36
40
50
60
80
100
120
36
40
50
60
80
100
120
36
40
50
60
80
100
120
Box
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
GENERAL PURPOSE
butted together and joined by high strength
tape. This allows belts to run in either direction
for greater belt life and smooth running.
Applications:
Dimensions
3/4" x 18"
3/4" x 20 -1/2"
1" x 12"
1" x 21"
Code
CZ06018036
CZ06018040
CZ06018050
CZ06018060
CZ06018080
CZ06018100
CZ06018120
CZ06020036
CZ06020040
CZ06020050
CZ06020060
CZ06020080
CZ06020100
CZ06020120
CZ08012036
CZ08012040
CZ08012050
CZ08012060
CZ08012080
CZ08012100
CZ08012120
CZ08021036
CZ08021040
CZ08021050
CZ08021060
CZ08021080
CZ08021100
CZ08021120
Grit
36
40
50
60
80
100
120
36
40
50
60
80
100
120
36
40
50
60
80
100
120
36
40
50
60
80
100
120
Box
20
20
20
20
20
20
20
5
10
10
10
10
10
10
5
10
10
10
10
10
10
5
10
10
10
10
10
10
35
3
COATED ABRASIVES
Dimensions
1" x 30"
1" x 42"
1-1/2" x 60"
2" x 48"
2" x 60"
Code
CZ08030036
CZ08030040
CZ08030050
CZ08030060
CZ08030080
CZ08030100
CZ08030120
CZ08042024
CZ08042036
CZ08042040
CZ08042050
CZ08042060
CZ08042080
CZ08042100
CZ08042120
CZ12060036
CZ12060040
CZ12060050
CZ12060060
CZ12060080
CZ12060100
CZ12060120
CZ16048036
CZ16048040
CZ16048050
CZ16048060
CZ16048080
CZ16048100
CZ16048120
CZ16060036
CZ16060040
CZ16060050
CZ16060060
CZ16060080
CZ16060100
CZ16060120
Grit
36
40
50
60
80
100
120
24
36
40
50
60
80
100
120
36
40
50
60
80
100
120
36
40
50
60
80
100
120
36
40
50
60
80
100
120
GENERAL PURPOSE
Applications:
Dimensions
2" x 72"
2" x 132"
2-1/2" x 60"
Code
CZ16072036
CZ16072040
CZ16072050
CZ16072060
CZ16072080
CZ16072100
CZ16072120
CZ16132036
CZ16132040
CZ16132050
CZ16132060
CZ16132080
CZ16132100
CZ16132120
CZ20060036
CZ20060040
CZ20060050
CZ20060060
CZ20060080
CZ20060100
CZ20060120
Grit
36
40
50
60
80
100
120
36
40
50
60
80
100
120
36
40
50
60
80
100
120
PACKAGING: 5 belts per pack: Grit 36
10 belts per pack: Grit 40 and finer
36
3
COATED ABRASIVES
Dimensions
3" x 18"
3" x 21"
3" x 24"
3" x 60"
Code
CZ24018024
CZ24018036
CZ24018040
CZ24018050
CZ24018060
CZ24018080
CZ24018100
CZ24018120
CZ24021024
CZ24021036
CZ24021040
CZ24021050
CZ24021060
CZ24021080
CZ24021100
CZ24021120
CZ24024024
CZ24024036
CZ24024040
CZ24024050
CZ24024060
CZ24024080
CZ24024100
CZ24024120
CZ24060036
CZ24060040
CZ24060050
CZ24060060
CZ24060080
CZ24060100
CZ24060120
Grit
24
36
40
50
60
80
100
120
24
36
40
50
60
80
100
120
24
36
40
50
60
80
100
120
36
40
50
60
80
100
120
GENERAL PURPOSE
Applications:
Dimensions
3" x 132"
3-1/2" x 15-1/2"
4" x 21"
Code
CZ24132036
CZ24132040
CZ24132050
CZ24132060
CZ24132080
CZ24132100
CZ24132120
CZ28015036
CZ28015040
CZ28015050
CZ28015060
CZ28015080
CZ28015100
CZ28015120
CZ32021024
CZ32021036
CZ32021040
CZ32021050
CZ32021060
CZ32021080
CZ32021100
CZ32021120
Grit
36
40
50
60
80
100
120
36
40
50
60
80
100
120
24
36
40
50
60
80
100
120
PACKAGING: 5 belts per pack: Grit 24 and 36
37
3
COATED ABRASIVES
Dimensions
4" x 24"
4" x 36"
4" x 48"
4" x 54"
4" x 60"
Code
CZ32024024
CZ32024036
CZ32024040
CZ32024050
CZ32024060
CZ32024080
CZ32024100
CZ32024120
CZ32036024
CZ32036036
CZ32036040
CZ32036050
CZ32036060
CZ32036080
CZ32036100
CZ32036120
CZ32048036
CZ32048040
CZ32048050
CZ32048060
CZ32048080
CZ32048100
CZ32048120
CZ32054036
CZ32054040
CZ32054050
CZ32054060
CZ32054080
CZ32054100
CZ32054120
CZ32060036
CZ32060040
CZ32060050
CZ32060060
CZ32060080
CZ32060100
CZ32060120
Grit
24
36
40
50
60
80
100
120
24
36
40
50
60
80
100
120
36
40
50
60
80
100
120
36
40
50
60
80
100
120
36
40
50
60
80
100
120
GENERAL PURPOSE
Applications:
Dimensions
4" x 132"
6" x 48"
6" x 132"
Code
CZ32132036
CZ32132040
CZ32132050
CZ32132060
CZ32132080
CZ32132100
CZ32132120
CZ48048024
CZ48048036
CZ48048040
CZ48048050
CZ48048060
CZ48048080
CZ48048100
CZ48048120
CZ48132036
CZ48132040
CZ48132050
CZ48132060
CZ48132080
CZ48132100
CZ48132120
Grit
36
40
50
60
80
100
120
24
36
40
50
60
80
100
120
36
40
50
60
80
100
120
PACKAGING: 5 belts per pack: Grit 24 and 36
38
3
COATED ABRASIVES
SHOP ROLLS
Aluminium oxide - cloth backing
Dimensions
1" x 50 yd.
1-1/2" x 50 yd.
2" x 50 yd.
Code
SR105004
SR105006
SR105008
SR105010
SR105012
SR105015
SR105018
SR105024
SR105032
SR155004
SR155006
SR155008
SR155010
SR155012
SR155015
SR155018
SR155024
SR155032
SR205004
SR205006
SR205008
SR205010
SR205012
SR205015
SR205018
SR205024
SR205032
Grit
40X
60X
80J
100J
120J
150J
180J
240J
320J
40X
60X
80J
100J
120J
150J
180J
240J
320J
40X
60X
80J
100J
120J
150J
180J
240J
320J
Box
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Code
SP325080
SP325010
SP325012
SP325015
SP325018
Grit
80
100
120
150
180
Box
1
1
1
1
1
SANDING ROLLS
Aluminium oxide - paper
Dimensions
3-1/2" x 50 yd.
GENERAL PURPOSE
Made with aluminium oxide grain and a highly
flexible and durable cloth backing. Resin over resin
coating for extra long life. Shop rolls are used for
cleaning, polishing, deburring and blending
surfaces.
Applications:
Ferrous and non-ferrous materials, Iron,
Aluminium, Plastic, Fiberglass, Wood, Metal, Paint
removal, Deburring.
GENERAL PURPOSE
Made with aluminium oxide grain.
Applications:
Used for sanding joints.
39
3
COATED ABRASIVES
SANDING DISCS WITH "VELCRO" BACKING
Aluminium oxide paper
Dimensions
5" x 8 holes
6" x 6 holes
Code
BDV0540
BDV0560
BDV0580
BDV0512
BDV0515
BDV0518
BDV0522
BDV0524
BDV0532
BDV0640
BDV0660
BDV0680
BDV0612
BDV0615
BDV0618
BDV0622
BDV0624
BDV0632
Grit
40
60
80
120
150
180
220
240
320
40
60
80
120
150
180
220
240
320
Box
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
INDUSTRIAL QUALITY
Premium aluminium oxide paper with a velcro
backing for metal or woodworking applications.
Made with a high quality aluminium oxide grain
on a strong paper backing for maximum resistance.
Velcro adhesion is unaffected by dust, humidity or
water.
Applications:
Non-ferrous and ferrous materials, Wood, Metal,
Plastic, Paint, Varnish, Fiberglass.
Also available with no holes.
To order no holes add letter "PT" to the end of
the code. (e.g. BDV0540PT)
PRESSURE SENSITIVE ADHESIVE CLOTH DISCS (P.S.A.)
Dimensions
5"
6"
8"
9"
12"
40
Code
BDT05006
BDT05008
BDT05010
BDT05012
BDT06006
BDT06008
BDT06010
BDT06012
BDT08006
BDT08008
BDT08010
BDT08012
BDT09006
BDT09008
BDT09010
BDT09012
BDT12006
BDT12008
BDT12010
BDT12012
Grit
60
80
100
120
60
80
100
120
60
80
100
120
60
80
100
120
60
80
100
120
Box
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
These premium aluminium oxide discs have a self
adhesive backing for a quick change and easy
mounting. Made with aluminium oxide grain on a
strong cloth backing for high resistance.
Applications:
Non-ferrous and ferrous materials, Wood, Metal,
Plastic, Aluminium, Copper, Fiberglass.
3
COATED ABRASIVES
MINI RESIN POLYMER DISCS
Aluminium oxide "Quick-Trim"
Dimensions
3"
Code
PQ3A
PQ3B
PQ3D
Grit
24
36
60
Box
25
25
25
Ctn
100
100
100
4" and 5" also available on request.
Applications:
Ferrous, Non-ferrous materials, Rust, Paint,
Plastic, Composite.
Our durable polymer backed aluminium oxide sanding
discs are ideal for use with die grinders or drills. The
one-piece design eliminates the need of a backing pad.
They can be trimmed to help renew the cutting surface
or make them smaller to fit in those hard to reach
areas. This unique design makes them ideal for faster
grinding or finishing and they will remain cooler than
other abrasive discs presently available. One mandrel
(1/4") enclosed in each box of 25 pieces.
Use with PB4Q mandrels. See page 84.
MINI RESIN FIBER DISCS
Aluminium oxide "Screw-on"
Dimensions
2"
3"
4"
Code
PM236S
PM250S
PM260S
PM280S
PM210S
PM212S
PM336S
PM350S
PM360S
PM380S
PM310S
PM312S
PM436S
PM450S
PM460S
PM480S
PM410S
PM412S
Grit
36
50
60
80
100
120
36
50
60
80
100
120
36
50
60
80
100
120
Box
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
Ctn
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Code
PM236T
PM250T
PM260T
PM280T
PM210T
PM212T
PM336T
PM350T
PM360T
PM380T
PM310T
PM312T
PM436T
PM450T
PM460T
PM480T
PM410T
PM412T
Grit
36
50
60
80
100
120
36
50
60
80
100
120
36
50
60
80
100
120
Box
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
Ctn
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Abmast's heavy duty mini resin fiber discs are
excellent for weld, paint and coating removal as well
as blending and removing imperfections on all types
of materials. The strong fiber backing provides extra
long life and resistance. The “Screw-on” type has a
nylon threaded hub making them easier to mount to
the holder.
Applications:
Plastic, Fiberglass, Paint.
Use with PB2S, PB3S, PB4S. See page 83.
Aluminium oxide "Twist-on"
Dimensions
2"
3"
4"
Abmast's heavy duty mini resin fiber discs are
excellent for weld, paint and coating removal as
well as blending and removing imperfections on all
types of materials. The strong fiber backing
provides extra long life and resistance.
The “Twist-on” type has a metal attachment to
ensure a safe and secure fit with only half a twist.
Applications:
Plastic, Fiberglass, Paint.
Use with PB2T, PB3T, PB4T. See page 83.
41
4
NON-WOVEN ABRASIVES
DISCS
Surface conditioning discs "Screw-on"
Dimensions
2"
3"
4"
Code
PS2C
PS2G
PS2M
Application
Extra coarse
Coarse
Medium
Color
Brown
Gold
Maroon
Box
50
50
50
PS2F
PS3C
PS3G
PS3M
PS3F
PS4C
PS4G
PS4M
Fine
Extra coarse
Coarse
Medium
Fine
Extra coarse
Coarse
Medium
Blue
Brown
Gold
Maroon
Blue
Brown
Gold
Maroon
50
25
25
25
25
25
25
25
PS4F
Fine
Blue
25
2"
3"
4"
BROWN (Heavy Duty)
This extra coarse grit, non-woven disc is excellent
for ROUGH deburring, blending, cleaning
and polishing.
GOLD (Coarse)
This coarse grit, non woven disc is excellent for
deburring, blending, cleaning and polishing.
Surface conditioning discs "Twist-on"
Dimensions
These surface conditioning discs are made of nonwoven synthetic fibers, impregnated with abrasive
grains and bonded with resin. Surface conditioning
discs help to produce a uniform finish with
minimal heat or loading. They are recommended
for blending, deburring and surface cleaning
applications and will not rust.
Code
PT2C
PT2G
PT2M
Application
Extra coarse
Coarse
Medium
Color
Brown
Gold
Maroon
Box
50
50
50
PT2F
PT3C
PT3G
PT3M
PT3F
PT4C
PT4G
PT4M
Fine
Extra coarse
Coarse
Medium
Fine
Extra coarse
Coarse
Medium
Blue
Brown
Gold
Maroon
Blue
Brown
Gold
Maroon
50
25
25
25
25
25
25
25
PT4F
Fine
Blue
25
MAROON (Medium)
This medium grit, non-woven disc has all of the
same characteristics as the brown, but is not as
coarse. Use primarily for LIGHT deburring
and polishing.
BLUE (Very Fine)
The extra fine grit, non-woven disc makes it the
best choice for FINE finishing as it is not as
aggressive as the brown or the maroon.
Applications:
Non-ferrous and ferrous materials, Stainless steel,
Rust, Corrosion, Paint, Plastic, Composite,
Wood, Aluminium.
For backing holder see page 83.
42
4
NON-WOVEN ABRASIVES
DISCS AND HAND PADS
Surface conditioning discs - velcro backing
Dimensions
Code
4-1/2"
PC2C
PC2M
PC5C
PC5M
PC6C
PC6M
PC7C
PC7M
5"
6"
7"
Application Color
Coarse
Medium
Coarse
Medium
Coarse
Medium
Coarse
Medium
Gold
Maroon
Gold
Maroon
Gold
Maroon
Gold
Maroon
Box
Ctn
25
25
25
25
25
25
25
25
100
100
100
100
100
100
100
100
These hook and loop type (velcro) surface
conditioning discs are made with the same tough
synthetic fibers as our hand pads and smaller
discs. The hook and loop type backing allows for
less down time as they are quick to remove and
replace. The two colors available are the most
popular. The coarse GOLD discs are ideal for
heavy removal applications and the MAROON
medium discs for general purpose use.
Applications:
Rust removal, Cleaning stains, Removing stains,
Surface preparation, Blending, Heavy duty
cleaning, Ferrous and non-ferrous materials,
Stainless steel.
Hand pads
Dimensions
Code
Color
Box
Ctn
6" x 9"
PH69W
PH69G
PH69M
PH69V
PH69T
White
Grey
Maroon
Green
Tan
20
20
20
20
10
60
60
60
60
40
These 6" x 9" hand pads are made with tough
synthetic fibers and do not rust. They outperform
steel wool and wire brushes in many applications.
They are flexible and can be used wet or dry for
finishing or scuffing with water or solvents in
hard to reach areas. All pads can be washed and
reused for extended life as they stand up to
continuous use. The white pad is the only pad
that is not impregnated with abrasive grain.
Non-woven hand pads
WHITE: light cleaning and polishing, as it does not contain
any abrasive grain.
GRAY: blending, final prepping, primer rub down, blending,
removing paint over spray and scuffing.
MAROON: best suited for heavy duty cleaning and blending,
can be used for all the same applications as the gray as well.
GREEN: used primarily for heavy duty cleaning or scuffing.
TAN: the coarsest, can be used for rust removal, weld
cleaning and deburring or when a coarse finish is needed.
Scuffballs
Dimensions
2-1/2" x 1/4”
Kit
4" x 1/4”
Kit
Extension
Code
Color
Box
Ctn
PSB25G
PSB25M
PSB25V
PSB25AS
PSB04G
PSB04M
PSB04V
PSB204S
PSBEXT
Grey
Maroon
Green
3 Colors
Grey
Maroon
Green
3 Colors
10” ext
1
1
1
1
1
1
1
1
1
-
The Scuffball is made of individual layers of nonwoven material. The layers are assembled and
compressed into a ball, which is then mounted on
a drive shaft for use on power tools. There are a
series of fingers that reach into tight spaces and
conforms to the work piece.
Applications:
Scuffs over rivets and screws, removes scale,
polishes soft metals, hard to reach areas, flat
areas, different angles and contours.
43
4
NON-WOVEN ABRASIVES
DEPRESSED CENTER WHEELS "POLY-STRIP"
Surface stripping discs
Type 27
Dimensions
4" x 5/8" x 5/8"
4-1/2" x 5/8" x 7/8"
5" x 5/8" x 7/8"
7" x 5/8" x 7/8"
Code
PD455B
PD257B
PD557B
PD757B
R.P.M.
12 400
11 000
9 800
8 600
Box
10
10
10
10
Ctn
-
Box
20
10
10
10
Ctn
-
Abrasive nylon wheels for fast and agressive
removal of surface contaminants and for cleaning
welds. Discs are water-proof nylon fibre, enriched
with coarse-grain silicon carbide abrasive. For use
on angle grinders.
Applications:
Surface cleaning, Welds, Rust, Paint, Plastic,
Corrosion.
FLAT WHEELS "POLY-STRIP"
Surface stripping wheels
Dimensions
3" x 5/8" x 1/4"
4" x 5/8" x 1/4"
6" x 5/8" x 1/2"
8" x 5/8" x 1/2"
Type 1
Code
PM354B
PM454B
PM652B
PM852B
R.P.M.
10 500
8 000
5 300
4 000
Abrasive nylon wheels for fast and agressive
removal of surface contaminants and for cleaning
welds. Discs are water-proof nylon fibre, enriched
with coarse-grain silicon carbide abrasive. For use
on drills and straight grinders.
Applications:
Surface cleaning, Welds, Rust, Paint, Plastic,
Corrosion.
The flat wheels are used with the M1414S or M1208S.
For mandrels see page 84.
44
5
FLOOR SANDING SHEETS
Silicon carbide paper
Dimensions
CP 152
8" x 19-1/2"
CP 152
Clark new
Hireteck
CP 136
8" x 20"
CP 136
Silverline
CP 22
4-1/2" x 16-3/8"
CP22
Floor Boss
Orbi Sander Hireteck
Square Buff
Code
* B5216C/P
* B5220C/P
* B5224C/P
4-1/2" x 15-3/4"
Orbi Sander
Hireteck
P.S.A.
12" x 18"
Square Buff
P.S.A
Square Buff
12" x 24"
Square Buff
P.S.A
B5236
B5240
B5250
B5260
B5280
B5210
B5212
* B3616C/P
* B3620C/P
* B3624C/P
B3636
B3640
B3650
B3660
B3680
B3610
B3612
* B4516C/P
* B4520C/P
* B4524C/P
B4536
B4540
B4550
B4560
B4580
B4510
B4512
B41524C
B41536
B41550
B41580
B41512
* B1816C/P
* B1820C/P
* B1824C/P
B1836
B1860
B1880
B1810
B1812
* B2420C/P
* B2424C/P
B2436
B2460
B2480
B2410
B2412
Grit
16 Comb
20 Comb
24 Comb
36
40
50
60
80
100
120
16 Comb
20 Comb
24 Comb
36
40
50
60
80
100
120
16 Comb
20 Comb
24 Comb
36
40
50
60
80
100
120
24 Comb
36
50
80
120
16 Comb
20 Comb
24 Comb
36
60
80
100
120
20 Comb
24 Comb
36
60
80
100
120
Box
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
PROFESSIONAL QUALITY
For use on floor sanding machines. Grits 16, 20 and
24 are made with a combination backing,
a non-loading open coat of silicon carbide and a
resin over resin bond, for heavy removal. Grits 36 to
120 are closed coat with a paper backing for the
finishing touch.
Applications:
Wooden floors, Tile, Concrete.
New !!
Silverline with Velcro
Price: Add 50% to the price.
Product code: Add "V" after the code (ex: B3650V)
Square Buff:
Have a pressure sensitive adhesive backing.
Also available in double sided. (e.g. BDS1820P)
* 16, 20 and 24 grits are available in C or P
backings P is less expensive than C
45
5
FLOOR SANDING ROLLS
Dimensions
8" x 50 yards
12" x 50 yards
Code
B0816C/P
*
*B0820C/P
*B0824C/P
B0836
B0840
B0850
B0860
B0880
B0810
B0812
B1216C/P
*
*B1220C/P
*B1224C/P
B1236
B1240
B1250
B1260
B1280
B1210
B1212
Grit
16 Comb
20 Comb
24 Comb
36
40
50
60
80
100
120
16 Comb
20 Comb
24 Comb
36
40
50
60
80
100
120
Box
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Code
C8924
C8936
C8940
C8950
C8960
C8980
C8910
C8912
CW7729502
CW7729504
CW7729505
CW7729508
CW7729512
Grit
24
36
40
50
60
80
100
120
24
40
50
80
120
Box
5
5
10
10
10
10
10
10
10
10
10
10
10
Floor sanding rolls for those who prefer to cut their
own sheets. Grits 16, 20 and 24 Comb are made with
a combination backing, a non-loading open coat of
silicon carbide and a resin over resin bond, for
heavy removal. Grits 36 to 120 are closed coat with
a paper backing for the finishing touch.
Applications:
FLOOR SANDING SLEEVES
Dimensions
8" x 19"
Clarke
7-7/8" x 29-1/2"
Galaxie
46
Floor sanding belts with paper backing for use with
heavy duty belt sanders.
Applications:
Also available in "Zirconium". (e.g. CZ7729512)
5
FLOOR SANDING DISCS
Dimensions
Code
* B1512C/P
* B1516C/P
* B1520C/P
* B1524C/P
15" x 2"
16" x 2"
17" x 2"
19" x 2"
20" x 2"
B1536
B1540
B1550
B1560
B1580
B1510
* B1612C/P
* B1616C/P
* B1620C/P
* B1624C/P
B1636
B1640
B1650
B1660
B1680
B1610
* B1712C/P
* B1716C/P
* B1720C/P
* B1724C/P
B1736
B1740
B1750
B1760
B1780
B1710
* B1912C/P
* B1916C/P
* B1920C/P
* B1924C/P
B1936
B1940
B1950
B1960
B1980
B1910
* B2012C/P
* B2016C/P
* B2020C/P
* B2024C/P
B2036
B2040
B2050
B2060
B2080
B2010
Grit
12 Comb
16 Comb
20 Comb
24 Comb
36
40
50
60
80
100
12 Comb
16 Comb
20 Comb
24 Comb
36
40
50
60
80
100
12 Comb
16 Comb
20 Comb
24 Comb
36
40
50
60
80
100
12 Comb
16 Comb
20 Comb
24 Comb
36
40
50
60
80
100
12 Comb
16 Comb
20 Comb
24 Comb
36
40
50
60
80
100
Box
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
For use on floor maintenance machines. Grits 12,
16, 20 and 24 are made with a combination
backing, a non-loading open coat of silicon carbide
and a resin over resin bond to help prevent loading
during the initial sanding. Grits 36 to 120 are closed
coat with a paper backing for the finishing touch.
Applications:
47
5
FLOOR SANDING DISCS
Silicon carbide paper - velcro backing
Dimensions
6"
Holt
6-3/4"
Varathan
Code
BDC 60036
BDC 60040
BDC 60060
BDC 60080
BDC 60010
BDC 60012
BDC 67536
BDC 67540
BDC 67560
BDC 67580
BDC 67510
BDC 67512
Grit
36
40
60
80
100
120
36
40
60
80
100
120
Box
25
25
25
25
25
25
25
25
25
25
25
25
Grit
16C
24C
40
80
16C
24C
40
80
Box
25
25
25
25
25
25
25
25
These professional quality velcro backed floor
sanding discs are made with a closed coat silicon
carbide abrasive grain with a resin over glue bond.
They provide an excellent finish on all types of
wooden floors.
Applications:
Use on the Varathan ez V, Holt or U sanders.
Silicon carbide cloth P.S.A (Pressure Sensitive Adhesive)
Dimensions
Code
15"
* BPSA1516C/P
* BPSA1524C/P
17"
BPSA1540
BPSA1580
* BPSA1716C/P
* BPSA1724C/P
BPSA1740
BPSA1780
These self-adhesive floor discs are for use on floor
maintenance machines. Grits 16 and 24 Comb are
made with a combination backing, a non-loading
open coat of silicon carbide and a resin over resin
bond, to help prevent loading during the initial
sanding. Grits 40 and 80 are closed coat with a
paper backing for the finishing touch.
Applications:
48
5
EDGE SANDING DISCS
Dimensions
Code
* B0712C/P
* B0716C/P
* B0720C/P
* B0724C/P
7" x 7/8"
B0736
B0740
B0750
B0760
B0780
B0710
B0712
Grit
12 Comb
16 Comb
20 Comb
24 Comb
36
40
50
60
80
100
120
Box
25
25
25
25
25
25
25
25
25
25
25
For use on floor edger machines for hard-to-reach
areas. Grits 16, 20 and 24 Comb are made with a
combination backing a non-loading open coat of
silicon carbide and a resin over resin bond for
heavy removal. Grits 36 to 120 are closed coat with
a paper backing for the finishing touch.
Applications:
FLOOR MAINTENANCE PADS
Nylon pads
Dimensions
Black
13" Thick
J132B
15" Thick
J152B
16" Thick
J162B
17" Thick
J172B
19" Thick
J192B
20" Thick
J202B
12" x 18" Thick J182B
12" x 24" Thick J242B
Green
J132G
J152G
J162G
J172G
J192G
J202G
J182G
J242G
Code
Tan
J132T
J152T
J162T
J172T
J192T
J202T
J182T
J242T
Box
White
J132W
J152W
J162W
J172W
J192W
J202W
J182W
J242W
Red
J132R
J152R
J162R
J172R
J192R
J202R
J182R
J242R
5
5
5
5
5
5
5
5
Nylon floor pad to be used on floor
maintenance machines.
Black: Heavy duty. For stripping of heavy finishes.
Green: Medium. For cleaning and scrubbing.
Tan: Light. For buffing and polishing.
White: Fine. For fine polishing.
Red: For light polishing after a spray treatment.
Applications:
Wooden floors, Tile.
49
5
MESH SCREEN DISCS AND SHEETS
Silicon carbide
Dimensions
15"
16"
17"
19"
20"
12" x 18"
12" x 24"
50
Code
J1560
J1580
J1510
J1512
J1515
J1660
J1680
J1610
J1612
J1615
J1760
J1780
J1710
J1712
J1715
J1960
J1980
J1910
J1912
J1915
J2060
J2080
J2010
J2012
J2015
J1860
J1880
J1810
J1812
J1815
J2460
J2480
J2410
J2412
J2415
Grit
60
80
100
120
150
60
80
100
120
150
60
80
100
120
150
60
80
100
120
150
60
80
100
120
150
60
80
100
120
150
60
80
100
120
150
Box
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Mesh screen discs are impregnated with silicon
carbide grain to remove paint and varnish from
floors before applying new finishes.
Applications:
Wooden floors, Concrete floors, Tile floors.
6
WIRE BRUSHES
ABMAST quality brushes are designed to obtain maximum life as well as a Safety requirements
high removal rate. We offer a complete line of wire brushes made with
CARBON STEEL and STAINLESS STEEL with CRIMPED and KNOT wire to answer High quality workmanship combined with the finest raw materials enable
ABMAST brushes to provide maximum security and performance when used
to all types of work.
in accordance to some simple rules:
Straight wire: Used in knot-wire type brushes. Provides maximum impact • You must comply with safety codes ANSI-B165.1 and B165.2.
action for weld cleaning, heavy duty removal as well as fast and aggresive
• Operators must wear safety goggles and protective clothing during
cutting performance.
operation or when standing close to or working next to
Crimped wire: Used in all types of wheels, cup, end and side action brushes.
another operator.
Provides aggressive, continuous cleaning action and is excellent for
• Observe speed restrictions indicated on brushes as well as
removing light burrs and for fine finishing.
information provided in safety guide.
• Machine guard must always be kept in place for your safety.
51
6
WIRE BRUSHES
CIRCULAR BRUSHES
Knot wire wheel brushes carbon steel
Dimensions
4" x 3/8" x 5/8" -11 *
4" x 3/8" x M14 x 2.0
4" x 3/8" x M10 x 1.25
4" x 3/8" x M10 x 1.5
4" x 3/8" x 1/2" -13
6" x 3/8" x 5/8" -11 *
Wire
.020
.020
.020
.020
.020
.025
Code
YE435A
YE434A
YE431A
YE436A
YE432A
YE635A
R.P.M.
20 000
20 000
20 000
20 000
20 000
9 000
Box
5
5
5
5
5
5
Code
YE435S
YE434S
YE431S
YE436S
YE432S
YE635S
R.P.M.
20 000
20 000
20 000
20 000
20 000
9 000
Box
5
5
5
5
5
5
R.P.M.
20 000
20 000
20 000
20 000
20 000
12 500
12 500
9 000
Box
5
5
5
5
5
5
5
5
MEDIUM REMOVAL
A first run brush for cleaning welding beads.
The knotted tufts offer little flexibility and cover
more surface.
Applications:
Surface cleaning, Rust, Welds, Deburring.
Knot wire wheel brushes stainless steel
Dimensions
4" x 3/8" x 5/8" -11 *
4" x 3/8" x M14 x 2.0
4" x 3/8" x M10 x 1.25
4" x 3/8" x M10 x 1.5
4" x 3/8" x 1/2" -13
6" x 3/8" x 5/8" -11 *
Wire
.020
.020
.020
.020
.020
.016
MEDIUM REMOVAL
A first run brush for cleaning weld beads.
The highly knotted tufts offer little flexibility and
cover more surface for use on stainless steel
and non-ferrous metals.
Applications:
Surface cleaning, Welds, Deburring of stainless
steel, Aluminium, Non-ferrous metals.
Stringer bead brushes for pipeline carbon steel
Dimensions
4" x 1/4" x 5/8" -11 *
4" x 1/4" x M14 x 2.0
4" x 1/4" x M10 x 1.25
4" x 1/4" x M10 x 1.5
4" x 1/4" x 1/2" -13
5" x 1/4" x 5/8" -11 *
6" x 1/4" x 5/8" -11 *
6-1/2" x 1/4" x 5/8" -11 *
Wire
.020
.020
.020
.020
.020
.020
.020
.020
Code
YF445A
YF444A
YF441A
YF446A
YF442A
YF545A
YF635A
YF645A
HEAVY DUTY AND FAST REMOVAL
Designed to offer very fast slag removal after
the initial joining of two sections of pipe.
Applications:
Pipeline weld cleaning, Tight corners,
T-connections.
Applications:
Cleaning concrete
expansion joints.
Road construction brushes stainless steel
Dimensions
12" x 3/8" x 1 (P.H.)
Wire
.035
Code
YX290A
R.P.M.
5 000
Box
2
R.P.M.
20 000
20 000
20 000
20 000
20 000
12 500
12 500
9 000
Box
5
5
5
5
5
5
5
5
Stringer bead brushes for pipeline stainless steel
Dimensions
4" x 1/4" x 5/8" -11 *
4" x 1/4" x M14 x 2.0
4" x 1/4" x M10 x 1.25
4" x 1/4" x M10 x 1.5
4" x 1/4" x 1/2" -13
5" x 1/4" x 5/8" -11 *
6" x 1/4" x 5/8" -11 *
6-1/2" x 1/4" x 5/8" -11 *
52
Wire
.020
.020
.020
.020
.020
.020
.020
.020
Code
YF445S
YF444S
YF441S
YF446S
YF442S
YF545S
YF635S
YF645S
HEAVY DUTY AND FAST REMOVAL
Designed to offer very fast slag removal after
the initial joining of two sections of stainless or nonferrous pipes.
Applications:
Stainless steel, Aluminium, Pipeline, Ferrous metals.
* To modify 5/8” -11 threads see page 85
for thread adaptors.
6
WIRE BRUSHES
CIRCULAR AND CUP BRUSHES
Crimped wire wheel brushes carbon steel
Dimensions
4" x 5/8" x 5/8" -11 *
4" x 5/8" x M14 -2.0
4" x 5/8" x M10 -1.25
4" x 5/8" x M10 -1.5
4" x 5/8" x 1/2" -13
Wire
.014
.014
.014
.014
.014
Code
YL455A
YL454A
YL451A
YL456A
YL452A
R.P.M.
14 000
14 000
14 000
14 000
14 000
Box
5
5
5
5
5
Wire Code
.014 YH305A
.014 YH304A
.014
YH301A
.014 YH306A
.014 YH302A
.014 YH3505A
.020 YH405A
.020 YH505A
.020 YH605A
R.P.M.
14 000
14 000
14 000
14 000
14 000
12 000
9 000
8 000
6 600
Box
1
1
1
1
1
1
1
1
1
Wire
.020
.020
.020
.020
.020
.023
.020
.020
.025
.035
.025
.035
Code
YG315A
YG314A
YG311A
YG316A
YG312A
YG3515A
YG415A2
YG415A
YG615A
YG615A2
YG625A
YG625A2
R.P.M.
14 000
14 000
14 000
14 000
14 000
13 000
9 000
9 000
6 600
6 600
6 600
6 600
Box
1
1
1
1
1
1
1
1
1
1
1
1
Wire
.020
.020
.020
.020
.020
.023
Code
YG315S
YG314S
YG311S
YG316S
YG312S
YG615S
GENERAL PURPOSE
Crimped wire brushes are suitable for cleaning
large surfaces and conform to irregular or
contoured surfaces. Softer brushing action than
knot wire brushes.
Applications:
Surface cleaning, Rust, Paint, Finishing,
Light deburring.
Crimped wire cup brushes carbon steel
Dimensions
2-3/4" x 5/8" -11 *
2-3/4" x M14 x 2.0
2-3/4" x M10 x 1.25
2-3/4" x M10 x 1.5
2-3/4" x 1/2" -13
3-1/2" x 5/8" -11 *
4" x 5/8" -11 *
5" x 5/8" -11 *
6" x 5/8" -11 *
GENERAL PURPOSE
knot wire brushes.
Applications:
Light deburring.
Guarded brushes also available on page 54
Knot wire cup brushes carbon steel
Dimensions
2-3/4" x 5/8" -11 *
2-3/4" x M14 x 2.0
2-3/4" x M10 x 1.25
2-3/4" x M10 x 1.5
2-3/4" x 1/2" -13
3-1/2" x 5/8" -11 *
4" x 2 rows x 5/8" -11 *
4" x 1 row x 5/8" -11 *
6" x 1 row x 5/8" -11 *
6" x 1 row x 5/8" -11 *
6" x 2 rows x 5/8" -11 *
6" x 2 rows x 5/8" -11 *
HIGH REMOVAL, LONG LIFE
A special design allows access to angles and
flexible performance on any surface.
Applications:
Slag, Rust, Metal, Welds, Paint.
Guarded brushes also available on page 54
Knot wire cup brushes stainless steel
Dimensions
2-3/4" x 5/8" -11 *
2-3/4" x M14 x 2.0
2-3/4" x M10 x 1.25
2-3/4" x M10 x 1.5
2-3/4" x 1/2" -13
6" x 1 row x 5/8" x 11 *
R.P.M.
14 000
14 000
14 000
14 000
14 000
6 600
Box
1
1
1
1
1
1
Made with stainless steel wire to avoid
contamination of stainless steel surfaces.
Applications:
Stainless steel, Aluminium, Non-ferrous metals.
53
6
WIRE BRUSHES
Knot wire cup brushes banded carbon steel
Dimensions
3" x M14 x 2.0
3" x 5/8" -11 *
4" x 5/8" -11 *
5" x 5/8" -11 *
5" x 1 row x 5/8" -11 *
5" x 2 rows x 5/8" -11 *
6" x 5/8" -11 *
Wire
.020
.020
.030
.020
.030
.030
.030
Code
Y314A
Y315A
Y415A
Y505A
Y515A
Y525A
Y615A
R.P.M.
11 000
11 000
8 500
8 500
6 000
6 000
6 000
Box
1
1
1
1
1
1
1
Code
Y314S
Y315S
R.P.M.
11 000
11 000
Box
1
1
Code
YT415A
YT414A
YT215A
YT214A
R.P.M.
12 500
12 500
12 500
12 500
Box
5
5
5
5
Designed for working at high speed with very little
brush distortion. When the wire is worn to the band,
remove the band with a hammer blow to uncover
extra trim length.
Applications:
Rust, Edges, Paint, Steel, Scale, Welds.
Knot wire cup brushes banded stainless steel
Dimensions
3" x M14 x 2.0
3" x 5/8" -11 *
Wire
.020
.020
Made with stainless steel for working at high speed
with very little brush distortion. When the wire is
worn to the band, remove the band with a hammer
blow to get extra trim length.
Applications:
Knot wire saucer-cup brushes carbon steel
Dimensions
4" x 5/8" -11 *
4" x M14 x 2.0
4-1/2" x 5/8" -11 *
4-1/2" x M14 x 2.0
Wire
.014
.014
.014
.014
Designed to permit access to difficult angles.
Applications:
Rust, Edges, Paint, Steel, Scale, Welds.
Guarded brushes
Dimensions
Spec.
3" x 5/8" -11
Ultra crimped
4" x 5/8" -11
Ultra crimped
3" x 5/8" -11
Knotted
4" x 5/8" -11
Knotted
3" x 5/8" -11
Crimped
4" x 5/8" -11
Crimped
Three different wire types
Ultra crimped "New wire type"
"Ultra crimped"
54
Knotted
Code
R.P.M. Box
GYC315AP 11 000 1
GYC415AP 11 000 1
GYG315AP 8 500 1
GYG415AP 8 500 1
GYH305AP 6 000 1
GYH405AP 6 000 1
Crimped
The wires are tempered and coated for optimum
performance. Our “ULTRA crimped” and crimped
brusher are made of brass coated carbon steel wire.
The knotted brushes are made of tempered steel
wire. The guard will not interfere with your view of
the material and will wear down when it comes in
contact with your workpiece.
6
WIRE BRUSHES
Crimped wire saucer-cup brushes carbon steel
Dimensions
4" x 5/8" -11 *
4" x M14 x 2.0
Wire
.014
.014
Code
YC415A
YC414A
R.P.M.
12 000
12 000
Box
5
5
GENERAL PURPOSE
knot wire brushes.
Applications:
Surface cleaning, Light deburring, Paint,
Finishing, Rust.
Crimped wire wheel brushes for bench grinders carbon steel
Dimensions
6" x 1/2" x 5/8", 1/2"
6" x 1" x 5/8"
6" x 1" x 1/2"
7" x 1" x 5/8"
8" x 1" x 5/8"
10" x 1" x 3/4"
Wire
.014
.014
.014
.014
.014
.014
Code
YB658A
YB668A
YB662A
YB769A
YB869A
YB167A
R.P.M.
6 000
6 000
6 000
6 000
4 500
3 600
Box
1
1
1
1
1
1
GENERAL PURPOSE
Dense crimped wire permits the cleaning of
surface contaminents without affecting the
base metal. Additional brushes can be placed on
the same spindle to obtain a wider face.
Applications:
Paint, Rust, Light deburring or cleaning of ferrous
* Multiple bushings included.
Knot wire wheel brush for bench grinders carbon steel
Dimensions
6" x 1/2" x 5/8"
Wire
.025
Code
YB652A
R.P.M.
9 000
Box
1
GENERAL PURPOSE
Dense knotted wire permits the cleaning of
surface contaminents without affecting the base
metal. Additional brushes can be placed on the
same spindle to obtain a wider face.
Applications:
Paint, Rust, Light deburring or cleaning of
ferrous and non-ferrous metals.
55
6
WIRE BRUSHES
HAND AND WIRE END BRUSHES
Scratch brushes carbon steel
Rows
4 x 16
3 x 19
4 x 19
3 x 14
3 x 19
A
B
E
Description
Shoe handle
Curved handle
Curved handle
V Shaped
Scraper
Type
A
B
B
B
E
Wire
.014
.014
.014
.014
.014
Code
YJ46SH
YJ39CH
YJ49CH
YJ34V
YJ39SC
Box
12
12
12
12
12
GENERAL PURPOSE
Scratch brushes are used for general purpose hand
brushing on most materials. Some models have a
built-in scraper.
Applications:
Metals, Rust, Dirt, Castings.
Scratch brushes stainless steel
B
C
Rows
Description
Type
3 x 19
Curved handle
B
4 x 19
Curved handle
B
3 x 7 Welder's tooth brush C
Wire
.012
.012
.012
Code
YJ39CHS
YJ49CHS
YJ37WTS
Box
12
12
36
Dimensions Description
6-1/8" x 1/2" Acid brush
1-5/8" x 1-1/4" Particle brush
Wire
.006
-
Code
YM010
YM009
Box
144
12
D
F
Type
D
F
CARBON FREE
Designed to avoid contamination on stainless steel
Applications:
Wire end brushes carbon steel 1/4" shank
A
B
C
D
Dimensions
1/2" x 1/4"
3/4" x 1/4"
1" x 1/4"
3/4" x 1/4"
1" x 1/4"
2" x 1/4"
2-1/2" x 1/4"
3" x 1/4"
3" x 1/4"
2-1/2" x 1/4"
3" x 1/4"
Type
A
A
A
B
B
C
C
C
C
D
E
Wire
.020
.020
.020
.020
.020
.014
.014
.014
.008
.014
.020
Code
YK009A
YK001A
YK004A
YK005A
YK002A
YK006A
YK003A
YK007A
YK020A
YK008A
YK013A
R.P.M. Box
25 000 10
22 000 10
22 000 10
22 000 10
22 000 10
20 000 10
20 000 10
20 000 10
20 000 10
13 000 10
20 000 10
Code
YK020S
YK021S
YK002S
YK007S
R.P.M. Box
25 000 10
22 000 10
22 000 10
20 000 10
GENERAL PURPOSE
A. Crimped wire end brush for light deburring
and cleaning.
B. Twist knot end brush for agressive brushing and
high stock removal.
C. Circular crimped wire brush for cleaning the
inside of pipes.
D. Crimped wire cup brush for light deburring
and cleaning.
E. ???
Applications:
Pipes, Moulds, Ferrous metals.
E
Wire end brushes stainless steel 1/4" shank
Dimensions
1/2" x 1/4"
1" x 1/4"
1" x 1/4"
3" x 1/4"
A
B
C
56
Type
A
A
B
C
Wire
.006
.006
.020
.014
GENERAL PURPOSE
A. Crimped wire end brush for light deburring
and cleaning.
B. Twist knot end brush for agressive brushing and
high stock removal.
C. Circular crimped wire brush for cleaning the
inside of pipes.
Applications:
6
WIRE BRUSHES
FOR DIY-MARKET
57
6
WIRE BRUSHES
Knot wire wheel brushes carbon steel
Dimensions
4" x 3/8" x M10 x 1.25
4" x 3/8" x 5/8" -11
Wire
.020
.020
Code
R.P.M.
YE431AP 20 000
YE435AP 20 000
Box
1
1
Applications:
Surface cleaning, Rust, Welds, Deburring.
Code
R.P.M.
YF441AP 20 000
YF445AP 20 000
YF445AP 12 500
Box
1
1
1
Applications:
Pipeline weld cleaning, Tight corners,
T-connections.
Code
YL451AP
YL455AP
R.P.M.
14 000
14 000
Box
1
1
Wire
.014
.014
.020
Code
R.P.M.
YH301AP 14 000
YH305AP 14 000
YH405AP 9 000
Box
1
1
1
Wire
.020
.020
.020
.020
Code
YG311AP
YG315AP
YG316AP
YG415AP
R.P.M.
14 000
14 000
14 000
9 000
Box
1
1
1
1
Code
YG315SP
R.P.M.
14 000
Box
1
Stringer bead brushes for pipeline carbon steel
Dimensions
4" x 1/4" x M10 x 1.25
4" x 1/4" x 5/8" -11
5" x 1/4" x 5/8" -11
Wire
.020
.020
.020
Crimped wire wheel brushes carbon steel
Dimensions
4" x 5/8" x M10 x 1.25
4" x 5/8" x 5/8" -11
Wire
.014
.014
Applications:
Light deburring.
Crimped wire cup brushes carbon steel
Dimensions
2-3/4" x M10 x 1.25
2-3/4" x 5/8" -11
4" x 5/8" -11
Applications:
Light deburring.
Knot wire cup brushes carbon steel
Dimensions
2-3/4" x M10 x 1.25
2-3/4" x 5/8" -11
2-3/4" x M10 x 1.5
4" x 1 ROW x 5/8" -11
Applications:
Slag, Rust, Metal, Welds, Paint.
Knot wire cup brushes stainless steel
Dimensions
2-3/4" x 5/8" -11
Wire
.020
Applications:
Stainless steel, Aluminium, Non-Ferrous, Metals.
58
6
WIRE BRUSHES
CIRCULAR, CUP AND END BRUSHES
Knot wire cup brushes banded carbon steel
Dimensions
3" x 5/8" -11
4" x 5/8" -11
5" x 5/8" -11
6" x 5/8" -11
Wire
.020
.030
.030
.030
Code
Y315AP
Y415AP
Y515AP
Y615AP
R.P.M.
11 000
8 500
6 000
6 000
Box
1
1
1
1
Code
YC414AP
YC415AP
R.P.M.
12 000
12 000
Box
1
1
Code
YT414AP
YT415AP
R.P.M.
12 500
12 500
Box
1
1
Applications:
Rust, Paint, Scale, Welds, Steel, Edges.
Crimped wire saucer-cup brushes carbon steel
Dimensions
4" x M14 x 2.0
4" x 5/8" -11
Wire
.014
.014
Applications:
Light deburring.
Knot wire saucer-cup brushes carbon steel
Dimensions
4" x M14 x 2.0
4" x 5/8" -11
Wire
.014
.014
Applications:
Rust, Paint, Scale, Edges, Steel, Welds.
Crimped wire wheel brushes for bench grinders carbon steel
Dimensions
6" x 1/2" x 5/8", 1/2"
6" x 1" x 5/8"
8" x 1" x 5/8"
Wire
.014
.014
.014
Code
YB658AP
YB668AP
YB869AP
R.P.M.
6 000
6 000
4 500
Box
1
1
1
Applications:
Paint, Light deburring or cleaning of ferrous and
non-ferrous metals, Rust.
* Multiple bushings included.
Wire end brushes carbon steel 1/4” shank
A
B
Dimensions
3/4" x 1/4"
1" x 1/4"
1" x 1/4"
3/4" x 1/4"
2-1/2" x 1/4"
No
A
B
A
B
D
Wire
.020
.020
.020
.020
.014
Code
YK001AP
YK002AP
YK004AP
YK005AP
YK008AP
R.P.M.
22 000
22 000
22 000
22 000
13 000
Box
1
1
1
1
1
Applications:
Pipes, Moulds, Ferrous metals.
D
Crimped wire cup brushes with shank carbon steel
Dimensions
2" x 1/4"
2" x 1/4"
3" x 1/4"
Wire
Fine
Coarse
Coarse
Code
YK202AP
YK203AP
YK204AP
R.P.M.
4 500
4 500
4 500
Box
1
1
1
Applications:
Light deburring, Finishing, Cleaning.
59
6
WIRE BRUSHES
CIRCULAR, CUP AND END BRUSHES
Crimped wire circular brushes with shank carbon steel
Dimensions
1-1/2" x 1/4"
1-1/2" x 1/4"
2" x 1/4"
2" x 1/4"
2-1/2" x 1/4"
2-1/2" x 1/4"
3" x 1/4"
3" x 1/4"
3-1/2" x 1/4"
3-1/2" x 1/4"
Wire
Coarse
Fine
Coarse
Fine
Coarse
Fine
Coarse
Fine
Coarse
Fine
Code
YK301AP
YK302AP
YK303AP
YK304AP
YK305AP
YK306AP
YK307AP
YK308AP
YK309AP
YK310AP
R.P.M.
4 500
4 500
4 500
4 500
4 500
4 500
4 500
4 500
4 500
4 500
Box
1
1
1
1
1
1
1
1
1
1
Wire
Coarse
Fine
Coarse
Fine
Coarse
Fine
Coarse
Fine
Code
YB400AP
YB401AP
YB402AP
YB403AP
YB404AP
YB405AP
YB406AP
YB407AP
R.P.M.
4 500
4 500
4 500
4 500
4 500
4 500
4 500
4 500
Box
1
1
1
1
1
1
1
1
Wire
Nylon
Nylon
Code
YN103AP
YN104AP
R.P.M.
4 500
4 500
Box
1
1
Applications:
Wire
Nylon
Nylon
Code
YN105AP
YN106AP
R.P.M.
4 500
4 500
Box
1
1
Applications:
Wire
Nylon
Nylon
Nylon
Code
YN100AP
YN101AP
YN102AP
R.P.M.
4 500
4 500
4 500
Box
1
1
1
Applications:
Crimped wire flat circular brushes
Dimensions
3" x 13mm x 1/2"
3" x 13mm x 1/2"
4" x 13mm x 1/2"
4" x 13mm x 1/2"
5" x 13mm x 1/2"
5" x 13mm x 1/2"
6" x 13mm x 1/2"
6" x 13mm x 1/2"
Applications:
For mandrel see page 84.
Brushes 1/4” shank nylon
Dimensions
3/4" x 1/4"
1" x 1/4"
Cup brushes 1/4” shank nylon
Dimensions
2" x 1/4"
2-3/4" x 1/4"
Flat brushes 1/4” shank nylon
Dimensions
2" x 1/4" x 1/4"
3" x 1/4" x 1/4"
4" x 1/4" x 1/4"
60
Applications:
6
COTTON WHEELS
FOR POLISHING
Flat cotton wheels
Dimensions
4" x 1/2" x 1/2"
6" x 1/2" x 1/2"
Wire
Cotton
Cotton
Code
YB500AP
YB501AP
R.P.M.
4 500
4 500
Box
1
1
Applications:
Polishing, Light cleaning.
For mandrel see page 84.
If you do not find
what you are looking for
call us.
We can provide
other sizes and products
which are not in our catalog.
61
7
CARBIDE BURS
Stainless steel and metal 1/4" shank
Shape
Cylindrical
Cylindrical End Cut
Cylindrical Ball Nose
Ball
Oval
Round Tree
Pointed Tree
Flame
60° Angle
90° Angle
14° Angle
Pointed cone
Inverted cone
Dimensions
1/4" x 5/8" x 1/4"
3/8" x 3/4" x 1/4"
1/2" x 1" x 1/4"
1/4" x 5/8" x 1/4"
3/8" x 3/4" x 1/4"
1/4" x 5/8" x 1/4"
3/8" x 3/4" x 1/4"
1/2" x 1" x 1/4"
1/4" x 1/4" x 1/4"
3/8" x 3/8" x 1/4"
1/2" x 1/2" x 1/4"
1/4" x 3/8" x 1/4"
3/8" x 5/8" x 1/4"
1/2" x 7/8" x 1/4"
1/4" x 5/8" x 1/4"
3/8" x 3/4" x 1/4"
1/2" x 1" x 1/4"
1/4" x 5/8" x 1/4"
3/8" x 3/4" x 1/4"
1/2" x 1" x 1/4"
1/4" x 1/2" x 1/4"
5/16" x 3/4" x 1/4"
1/2" x 1-1/4" x 1/4"
3/8" x 1/4" x 1/4"
3/8" x 3/16" x 1/4"
1/4" x 5/8" x 1/4"
3/8" x 1-1/16" x 1/4"
1/2" x 1-1/8" x 1/4"
1/4" x 1/2" x 1/4"
3/8" x 5/8" x 1/4"
1/2" x 7/8" x 1/4"
1/2" x 1/2" x 1/4"
Code
SA1DC
SA3DC
SA5DC
SB1DC
SB3DC
SC1DC
SC3DC
SC5DC
SD1DC
SD3DC
SD5DC
SE1DC
SE3DC
SE5DC
SF1DC
SF3DC
SF5DC
SG1DC
SG3DC
SG5DC
SH1DC
SH2DC
SH5DC
SJ3SC
SK3SC
SL1DC
SL3DC
SL4DC
SM1DC
SM4DC
SM5DC
SN3DC
ABMAST offers a wide range of carbide burs,
manufactured with solid carbide. ABMAST double
cut burs are the most popular and are designed for
fast and efficient stock removal.
Applications:
Hard metals, Stainless steel.
CYLINDRICAL
SA
CYLINDRICAL
END CUT
SB
CYLINDRICAL
BALL NOSE
SC
BALL
SD
OVAL
SE
ROUND TREE
SF
POINTED TREE
SG
FLAME
SH
ANGLE
SJ
SK
SL
POINTED CONE
SM
INVERTED CONE
SN
Aluminium and non-ferrous materials 1/4" shank
Shape
Cylindrical
Ball
Round Tree
14° Angle
62
Dimensions
3/8" x 3/4" x 1/4"
1/2" x 1" x 1/4"
3/8" x 3/4" x 1/4"
1/2" x 1" x 1/4"
3/8" x 3/8" x 1/4"
1/2" x 1/2" x 1/4"
3/8" x 3/4" x 1/4"
1/2" x 1" x 1/4"
3/8" x 1-1/16" x 1/4"
Code
SA3FMC
SA5FMC
SC3FMC
SC5FMC
SD3FMC
SD5FMC
SF3FMC
SF5FMC
SL3FMC
GENERAL PURPOSE
The large flutes help to prevent build-up and
provide a smooth finish. Highly recommended for
use on softer (sticky) materials and plastic.
Applications:
Aluminium, Non-ferrous metals, Soft metals,
Soft materials, Plastic.
7
CARBIDE BURS
Shape
Cylindrical
Ball
Oval
Round Tree
Pointed Tree
8° Taper
14° Taper
Inverted Cone 10°
Dimensions
1/8" x 9/16" x 1/8"
1/4" x 1/2" x 1/8"
1/8" x 9/16" x 1/8"
1/4" x 1/2" x 1/8"
1/8" x 1/8" x 1/8"
1/4" x 1/4" x 1/8"
1/8" x 1/4" x 1/8"
1/4" x 3/8" x 1/8"
1/8" x 1/2" x 1/8"
1/4" x 1/2" x 1/8"
1/8" x 1/2" x 1/8"
1/4" x 1/2" x 1/8"
1/8" x 1/2" x 1/8"
3/16" x 1/2" x 1/8"
1/8" x 3/16" x 1/8"
Code
SA43DC
SA51DC
SC42DC
SC51DC
SD42DC
SD51DC
SE41DC
SE51DC
SF42DC
SF51DC
SG44DC
SG51DC
SL42DC
SL53DC
SN42DC
ABMAST offers a wide range of carbide burs,
manufactured with solid carbide. ABMAST double cut
burs are the most popular and are designed for
fast and efficient stock removal.
Applications:
CYLINDRICAL
SA
CYLINDRICAL BALL NOSE
SC
BALL
SD
OVAL
ROUND TREE
SE
SF
POINTED TREE
SG
INCLUDED ANGLE (TAPER)
SL
INVERTED CONE
SN
CARBIDE BUR DISPLAYS
Assortment of carbide bur kits
Deluxe plexiglass display containing 20 double cut burs:
SA1DC, SA3DC, SA5DC, SB1DC, SB3DC, SC1DC, SC3DC, SC5DC, SD1DC, SD3DC,
SE3DC, SF1DC, SF3DC, SF5DC, SG1DC, SG3DC, SG5DC, SL1DC, SL3DC, SM4DC
Wooden display containing 9 carbide burs:
SA5DC, SC1DC, SD3DC, SE5DC, SF1DC, SG3DC, SH5DC, SL3DC, SM1DC
SA5DC, SC1DC, SD3DC, SE5DC, SF1DC, SG3DC
Variety of 1/4" carbide burs with 1/4" shank
SA3DC, SC3DC, SD3DC, SE3DC, SF3DC, SG3DC, SH2DC, SL3DC, SM4D
Code
SKIT1
Applications:
SKIT2
SKIT3
Code
SKIT4
SKIT5
Code
SKIT6
SKIT7
Code
SKIT8
SKIT9
63
8
SPECIALITY BLADES
CARBIDE SEGMENTED BLADES “MULTI” EX SERIES
Blades for high speed, circular saws and angle grinders
Dimensions
4" x 7/8" *
7" x N -5/8"
12" x 20mm
12" x 1"
14" x 20mm
14" x 1"
16" x 1"
Quality
Extra
Extra
Extra
Extra
Extra
Extra
Extra
Code
CB47X
CB77X
CB22X
CB21X
CB42X
CB41X
CB61X
R.P.M.
15 300
8 600
6 300
6 300
5 400
5 400
3 800
GENERAL PURPOSE
The ABMAST "MULTI" blade is a unique blade that
cuts almost anything. This blade is manufactured
with carbide segments or tips that chop and rip
through all types of building materials quickly and
efficiently.
High carbide concentration provides extended life
under extreme usage. For wet or dry use for
various products.
Ideal for: Rescue squads, fire fighters, roofers,
renovators, landscapers, demolition operations,
wreckers, etc.
* Solid reducing bushing 7/8" to 5/8" available.
Applications:
Tar and gravel roofs, Shingle roofs, Tree roots,
Sheet metal roofs, Fiberglass, Auto body panels,
Decking, Railway ties, Pallets, Timber, Rubber,
Nails, Caulking, Expansion joints.
ELECTROPLATED BLADES
Small diameter diamond blades- dry or wet cutting
Dimensions
Quality
Standard/Continuous
4" x .062" x 3/4", 5/8" Standard/Slotted
Premium/Slotted
Standard/Continuous
4-1/2" x .062" x 7/8"
Standard/Slotted
Premium/Slotted
Standard/Continuous
5" x .062" x 7/8"
Standard/Slotted
Premium/Slotted
Standard/Continuous
7" x .062" x N, 5/8" Standard/Slotted
Premium/Slotted
Standard/Continuous
8" x .060" x 5/8"
Standard/Slotted
Premium/Slotted
Standard/Continuous
10" x .060" x 5/8"
Standard/Slotted
Premium/Slotted
64
Code + Spec
EP
N1000SC
N1001SS
N1002PS
N1003SC
N1004SS
N1005PS
N1006SC
N1007SS
N1008PS
N1009SC
N1010SS
N1011PS
N1011SC
N1013SS
N1014PS
N1013SC
N1016SS
N1016PS
R.P.M.
15 000
15 000
15 000
13 300
13 300
13 300
12 000
12 000
12 000
8 730
8 730
8 730
7 640
7 640
7 640
6 115
6 115
6 115
INDUSTRIAL QUALITY
Electroplated blades are designed to cut and grind
at the same time. This diamond blade offers a clean
and smooth finish.
Premium slotted electroplated blades are cool and
agressive cutting. The large exposed diamond
section gives extra speed and provides superior
cutting and grinding power. Specially designed to
cut shapes and curves, a superior performance
will be noticed immediately.
Applications:
Fiberglass, Composite, Stone, Graphite.
8
DIAMOND PRODUCTS
ABMAST is known as an important supplier of diamond products and offers only high quality blades and bits that answer to the industry’s requirements.
ABMAST offers segmented, turbo and continuous rim blades for wet or dry cutting applications. We also have a wide variety of core bits available in the
most popular sizes and specifications.
We offer different grades in the majority of our diamond products. They are determined by segment height, diamond concentration and quality, contained
in the segments. (Econo-Standard - Premium - Extra Premium).
Matching the proper blade or bit to the application is a vital part in obtaining the best performance at an economical cost of cut per foot.
MAXIMUM BLADE CUTTING DEPTH
Blade
diameter
Cutting
depth
Blade
diameter
3-5/8”
4-5/8”
5-5/8”
6-5/8”
7-5/8”
9-5/8”
10-5/8”
11-3/4”
14-3/4”
3-3/8”
4”
6”
7”
8”
9”
10”
12”
14”
DIAMOND BLADE OPERATING SPEEDS
Cutting
depth
Diameter*
1/2”
3/4”
1-3/4”
2-1/4”
2-3/4”
3-1/4”
3-3/4”
4-3/4”
5-3/4”
3-3/8”
4”
4-1/2”
5”
6”
7”
8”
9”
10”
12”
14”
16”
18”
20”
22”
24”
26”
28”
30”
32”
36”
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
12”
14”
16”
..................
..................
..................
Tile saw blades
12”
14”
16”
18”
20”
24”
26”
30”
36”
Concrete saw blades
............................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
12”
14”
16”
...........................
...........................
...........................
4”
5”
6”
10”
12”
14”
18”
20”
Stationary saw blades
...........................
...........................
...........................
...........................
...........................
3”
4”
5”
7”
8”
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
...........................
Small diameter blades for circular
saws and angle grinders
4”
4-1/2”
5”
6”
7”
8”
9”
...........................
...........................
...........................
...........................
...........................
...........................
...........................
1”
1-1/4”
1-1/2”
2”
2-1/2”
3”
3-1/2”
Recommended
Maximum safe
operating speeds
speeds
(R.P.M.)*
(R.P.M.)**
7,655
.................. 12,600
9,072
.................. 15,000
8,063
.................. 13,300
7,257
.................. 12,000
6,048
.................. 10,185
5,184
.................. 8,730
4,536
.................. 7,640
4,032
.................. 6,790
3,629
.................. 6,115
3,024
.................. 5,095
2,592
.................. 4,365
2,268
.................. 3,820
2,016
.................. 3,395
1,814
.................. 3,055
1,649
.................. 2,780
1,512
.................. 2,550
1,396
.................. 2,350
1,296
.................. 2,185
1,210
.................. 2,040
1,134
.................. 1,910
1,008
.................. 1,700
N/A
N/A
N/A
..................
...................
..................
6,300
5,400
4,700
ATTENTION: Diamond blade cutting depths listed above are approximate and will vary according to the actual blade diameter, saw type and flanges used.
Cutting depth will also be affected if saw components (motor housing, engine carter, etc.) extend below the blade collars (flanges).
* Based on 9,500 SFPM (surface feet per minute), the general optimum performance range for cutting concrete and masonry products is ±10%. For hard dense
materials such as tile and other hard aggregate products, the optimum performance speed is 10%-25% less than the speeds shown above.
Blade shaft speeds (RPM at no load) for most tools will be higher than the recommended operating speeds shown above. Under normal sawing conditions,
the actual blade shaft speed of the tool will slow down under load and should fall within the optimum speed range.
** This speed (RPM) represents the maximum safe speed (in revolutions per minute) at which each blade can be used. Before using any blade, make sure
the blade shaft (arbor) speed of the tool is within the “maximum safe” limit of that blade.
65
8
DIAMOND PRODUCTS
ROAD CONSTRUCTION SAWS
Wet cutting cured concrete blades
Dimensions
Quality
12" x .125 x 1" (P.H.)
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
14" x .125 x 1" (P.H.)
14" x .187 x 1" (P.H.)
16" x .125 x 1" (P.H.)
18" x .155 x 1" (P.H.)
20" x .155 x 1" (P.H.)
24" x .187 x 1" (P.H.)
30" x .187 x 1" (P.H.)
36" x .187 x 1" (P.H.)
36" x .250 x 1" (P.H.)
Code + Spec
WBC 24
WBC 30
N208P
N209X
N220P
N221X
N223P
N224X
N229P
N230X
N235P
N236X
N247P
N248X
N256P
N257X
N271P
N272X
N289P
N290X
N292P
N293X
N358P
N359X
N370P
N371X
N373P
N374X
N379P
N380X
N385P
N386X
N397P
N398X
N406P
N407X
N421P
N422X
N439P
N440X
N442P
N443X
R.P.M.
5 095
5 095
4 365
4 365
4 365
4 365
3 820
3 820
3 395
3 395
3 055
3 055
2 550
2 550
2 040
2 040
1 700
1 700
1 700
1 700
WBC 24
Designed to deliver the durability, speed and
performance required by the rigorous demands of
the road construction industry.
Applications:
Cured concrete, Soft to medium aggregate.
WBC 30
Designed to deliver the durability, speed and
performance required by the rigorous demands of
the road construction industry.
Applications:
Reinforced cured concrete, Hard aggregate.
Dry cutting cured concrete blades
Dimensions
12" x .125 x 1" (P.H.)
14" x .125 x 1" (P.H.)
66
Quality
Premium
Extra
Premium
Extra
Code
N630P
N631X
N627P
N628X
R.P.M.
5 095
5 095
4 365
4 365
DC 24
Designed to make INTERMITTENT dry cuts in cured
concrete. For edge trimming,demolition and repair
work. Do not use on self propelled saws above
18 H.P.
Applications:
Cured concrete, Soft to medium aggregate.
8
DIAMOND PRODUCTS
Wet cutting asphalt and green concrete blades
Dimensions
Quality
12" x .125 x 1" (P.H.)
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
12" x .187 x 1" (P.H.)
14" x .125 x 1" (P.H.)
14" x .140 x 1" (P.H.)
14" x .187 x 1" (P.H.)
16" x .125 x 1" (P.H.)
16" x .140 x 1" (P.H.)
18" x .140 x 1" (P.H.)
18" x .155 x 1" (P.H.)
18" x .187 x 1" (P.H.)
20" x .140 x 1" (P.H.)
24" x .155 x 1" (P.H.)
24" x .187 x 1" (P.H.)
Code + Spec
WBF 24 WBA 16 WBG 16 WBG 20
N701P
N702X
N704P
N705X
N707P
N708X
N710P
N711X
N713P
N714X
N716P
N717X
N719P
N720X
N722P
N723X
N725P
N726X
N728P
N729X
N734P
N735X
N737P
N738X
N740P
N741X
N771P
N772X
N774P
N775X
N777P
N778X
N780P
N781X
N783P
N784X
N786P
N787X
N789P
N790X
N792P
N793X
N795P
N796X
N798P
N799X
N804P
N805X
N807P
N808X
N810P
N811X
N841P
N842X
N844P
N845X
N847P
N848X
N850P
N851X
N853P
N854X
N856P
N857X
N859P
N860X
N862P
N863X
N865P
N866X
N868P
N869X
N874P
N875X
N877P
N878X
N880P
N881X
N911P
N912X
N914P
N915X
N917P
N918X
N920P
N921X
N923P
N924X
N926P
N927X
N929P
N930X
N902P
N903X
N935P
N936X
N938P
N939X
N944P
N945X
N947P
N948X
N950P
N951X
R.P.M.
5 095
5 095
5 095
5 095
4 365
4 365
4 365
4 365
4 365
4 365
3 820
3 820
3 820
3 820
-
WBF 24
FAST CUTTING
Wear retardant cores are used to prevent
undercutting on all our asphalt and green concrete
road construction blades. Several specifications
are available to match different applications.
Applications:
Asphalt over concrete, Green concrete, Very hard
aggregate asphalt.
WBA 16
GENERAL PURPOSE
Applications:
Asphalt, Soft aggregate green concrete.
WBG 16
GENERAL PURPOSE
Applications:
Green concrete, Hard aggregate asphalt.
WBG 20
FAST CUTTING
Applications:
Medium to hard aggregate green concrete.
Dry cutting asphalt and green concrete blades
Dimensions
Quality
12" x .125 x 1" (P.H.)
Premium
Extra
Premium
Extra
14" x .125 x 1" (P.H.)
Code + Spec.
AS16
N621P
N622X
N624P
N625X
AS 16
GENERAL PURPOSE
Designed to make INTERMITTENT dry cuts in asphalt.
Ideal for edge trimming, demolition and repair work.
Do not use on self propelled saws above 18 H.P.
Applications:
Asphalt, Medium aggregate asphalt.
67
8
DIAMOND PRODUCTS
HIGH SPEED SAW BLADES
Dry cutting laser welded blades
Dimensions
12" x .110 x 20 mm
12" x .110 x 1"
12" x .110 x 7/8"
12" x .125 x 20 mm
12" x .125 x 1"
12" x .125 x 7/8"
14" x .110 x 20 mm
14" x .110 x 1"
14" x .110 x 7/8"
14" x .125 x 20 mm
14" x .125 x 1"
14" x .125 x 7/8"
16" x .125 x 1"
16" x .125 x 20 mm
Dimensions
12" x .110 x 1", 20 mm
14" x .125 x 1", 20 mm
16" x .125 x 1", 20 mm
Quality
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Quality
Premium
Premium
Premium
Code + Spec
HS 24
HS 16
HS 30
N501S2
N502P2
N503X2
N501S1
N502P1
N503X1
N501S7
N502P7
N503X7
N504S2
N505P2
N506X2
N504S1
N505P1
N506X1
N504S7
N505P7
N506X7
N507S2
N508P2
N509X2
N507S1
N508P1
N509X1
N507S7
N508P7
N509X7
N510S2
N511P2
N512X2
N510S1
N511P1
N512X1
N510S7
N511P7
N512X7
N560S1
N563P1
N566X1
N560S2
N563P2
N566X2
—
—
—
—
—
—
—
—
—
N523S2
N524P2
N525X2
N523S1
N524P1
N525X1
N523S7
N524P7
N525X7
—
—
—
—
—
—
—
—
—
N529S2
N530P2
N531X2
N529S1
N530P1
N531X1
N529S7
N530P7
N531X7
N561S1
N564P1
N567X1
N561S2
N564P2
N567X2
N540S2
N541P2
N542X2
N540S1
N541P1
N542X1
N540S7
N541P7
N542X7
N543S2
N544P2
N545X2
N543S1
N544P1
N545X1
N543S7
N544P7
N545X7
N546S2
N547P2
N548X2
N546S1
N547P1
N548X1
N546S7
N547P7
N548X7
N549S2
N550P2
N551X2
N549S1
N550P1
N551X1
N549S7
N550P7
N551X7
N562S1
N565P1
N568X1
N562S2
N565P2
N568X2
Code + Spec
N568PD —
—
N569PD —
—
N570PD —
—
HS 24
GENERAL PURPOSE
Applications:
Concrete, Paced stones, Concrete pipe, Block.
HS 16
ABRASIVE MATERIALS
Applications:
HS 30
HARD MATERIALS
Applications:
Reinforced concrete, Hard aggregate.
DUCTILE CUTTING BLADES
Applications:
Ductile pipe, Thin gauge metal drywall studs.
The laser welded high quality segments provide
top performance under the heat and stress of dry
cutting operation.
CAN BE USED WET.
68
8
DIAMOND PRODUCTS
Dry cutting laser welded turbo blade - general purpose
Dimensions
12" x .125 x 1"
12" x .125 x 20 mm
14" x .125 x 1"
14" x .125 x 20 mm
Quality
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
Code + Spec
TURBO
NT12S1
NT12P1
NT12S2
NT12P2
NT14S1
NT14P1
NT14S2
NT14P2
TURBO
GENERAL PURPOSE
Applications:
Concrete, Brick, Block, Paving stones, Precast and
prestressed materials.
Designed as a true general purpose wheel that
offers a faster and cleaner cut.
Can be used wet or dry.
DO NOT USE ON ASPHALT OR GREEN CONCRETE.
Dry cutting turbo blades - hard materials
Dimensions
12" x .110 x 1"
14" x .110 x 1"
Code + Spec
TURBO-GM
NT12E
NT14E
TURBO-GM
GENERAL PURPOSE
Applications:
Granite, Marble, Extremely hard materials.
Designed to cut easily through very hard materials
such as granite and marble.
Can be used dry or wet.
Dry cutting laser welded combo blades
Dimensions
12" x .125 x 1", 20 mm
14" x .125 x 1", 20 mm
Code
N570HP
N571HP
COMBO HIGH PERFORMANCE
Applications:
Brick, Hard paving stones, Block, Concrete.
These new high performance diamond blades offer
aggressive, fast cutting action.
They can be used on either high speed saws or
portable brick saws.
The deep gullets are self cooling and makes the
blade cut faster than other blades.
CAN BE USED WET.
69
8
DIAMOND PRODUCTS
BLADES FOR STATIONARY MACHINES
Dry cutting laser welded segmented blades
Dimensions
10" x .110 x 1", 5/8"
12" x .110 x 1"
14" x .110 x 1"
18" x .125 x 1"
20" x .125 x 1"
Quality
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Code + Spec
MS 24
MS 30
N580S
N581P
N582X
N583S
N584P
N585X
N586S
N587P
N588X
N589S
N590P
N591X
N592S
N593P
N594X
N600S
N601P
N602X
N603S
N604P
N605X
N606S
N607P
N608X
N609S
N610P
N611X
N612S
N613P
N614X
MS 24
GENERAL PURPOSE
Applications:
Slate, Paving stones, Concrete block.
MS 30
HARD MATERIALS
Applications:
Brick, Carbon brick, Cilicia brick.
THESE LASER WELDED BLADES CAN BE USED
DRY OR WET FOR BETTER DUST CONTROL.
Wet cutting segmented blades
Dimensions
Quality
14" x .110 x 1"
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
Premium
Extra
14" x .125 x 1"
18" x .125 x 1"
20" x .125 x 1"
20" x .155 x 1"
Code + Spec
R 49
NZ3010P
NZ3010X
NZ3012P
NZ3012X
NZ3015P
NZ3015X
NZ3017P
NZ3017X
NZ3019P
NZ3019X
These laser welded blades are specially designed
for cutting refractory brick.
Application:
Refractory bricks.
FOR USE WITH WATER ONLY.
DO NOT USE DRY.
Dry cutting laser welded turbo blades
Dimensions
Quality
10" x .110 x 1"
Standard
Premium
Standard
Premium
Standard
Premium
12" x .125 x 1"
14" x .125 x 1"
Code + Spec
TURBO
NT10S
NT10P
NT12S1
NT12P1
NT14S1
NT14P1
TURBO
GENERAL PURPOSE
Designed as a true general purpose blade that
provides a faster and cleaner cut.
Applications:
Brick, Block, Paving stones, Concrete, Precast and
prestressed materials.
CAN BE USED WET OR DRY.
70
8
DIAMOND PRODUCTS
BLADES FOR STATIONARY MACHINES
Wet cutting continuous rim blade
Dimensions
Quality
Code + Spec
TB 30
4" x .060 x 5/8"
6" x .060 x 5/8"
8" x .060 x 5/8" *
10" x .060 x 5/8" *
12" x .080 x 1"
14" x .080 x 1"
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Extra
Extra
N080S
N081P
N082X
N083S
N084P
N085X
N086S
N087P
N088X
N089S
N090P
N091X
N094X
N097X
TB 30
GENERAL PURPOSE
Designed for smooth and fast cutting of tiles,
ceramics and marble.
Applications:
Tile, Ceramic, Marble.
* AVAILABLE WITH 30MM OR 1” ARBOR.
Product code: To order 30mm add number "3"
after last letter, for 1" add "1". (ex: N087P(3),
NO87P(1)).
FOR USE WITH WATER ONLY.
DO NOT USE DRY.
BLADES FOR ANGLE GRINDERS AND CIRCULAR SAWS
Dry cutting laser welded segmented blades
Dimensions
Quality
4" x .070 x 7/8", 5/8",
20 mm
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
4.5" x .070 x 7/8", 5/8",
20 mm
5" x .080 x 7/8", 5/8",
20 mm
6" x .080 N -5/8"
7" x .080 N -5/8"
8" x .080 N -5/8"
9" x .090 x 7/8", -5/8"
Code + Spec
TS24
N001S
N002P
N003X
N004S
N005P
N006X
N007S
N008P
N009X
N010S
N011P
N012X
N013S
N014P
N015X
N016S
N017P
N018X
N029S
N029P
N029X
CS 24
GENERAL PURPOSE
Designed for long life. Can be used on circular
saws and angle grinders.
Applications:
Concrete, Brick, Block, Asphalt.
CAN BE USED WET.
71
8
DIAMOND PRODUCTS
SMALL DIAMETER DIAMOND BLADES
Dry cutting laser welded turbo blades - general purpose
Dimensions
Quality
4" x .080 x 7/8",
5/8", 20 mm
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
4-1/2" x .080 x 7/8",
5/8", 20 mm
5" x .080 x 7/8",
5/8", 20 mm
7" x .095 x N -5/8",
7/8", 20 mm
8" x .095 x N -5/8",
7/8", 20 mm
Code + Spec
TURBO
NT4S
NT4P
NT2S
NT2P
NT5S
NT5P
NT7S
NT7P
NT8S
NT8P
TURBO
GENERAL PURPOSE
Designed as a true general purpose wheel for a
faster and cleaner cut. Can be used on circular
saws and angle grinders.
Applications:
Concrete, Brick, Block, Tile, Ceramic.
Dry cutting laser welded tuck pointing blades
Dimensions
Quality
4" x .250 x 7/8", 20 mm
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
4-1/2" x .250 x 7/8"
5" x .250 x 7/8"
7" x .250 x 7/8"
8" x .250 x 7/8"
72
Code + Spec
TP 24
N030S
N031P
N039S
N040P
N042S
N043P
N033S
N034P
N036S
N037P
TP 24
GENERAL PURPOSE
Designed for fast removal of mortar in joints. Can
be used on circular saws and angle grinders.
Application:
Mortar joints.
DIAMOND PRODUCTS
SMALL DIAMETER DIAMOND BLADES AND CUP WHEELS
8
Dry grinding laser welded cup wheels
Dimensions
Quality
Code
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Extra
Standard
Premium
Standard
Premium
Standard
Premium
Extra
Standard
Premium
Extra
N050S
N051P
N052X
N050S8
N051P8
N052X8
N053S
N054P
N055X
N053S8
N054P8
N055X8
N065S
N066P
N068S
N068P
N056S
N057P
N058X
N059S
N060P
N061X
Dimensions
Quality
3-3/8" x 1.2mm x 15mm
4" x .060" x 5/8"
4-1/2" x .080" x 7/8", 5/8"
6" x .060" x 5/8"
7" x .060" x 7/8", 5/8"
8" x .060" x 5/8"
10" x .060" x 5/8"
Premium
Premium
Premium
Premium
Premium
Premium
Premium
Code + Spec.
DT30
NDT3P
NDT4P
NDT2P
NDT6P
NDT7P
NDT8P
NDT10P
4" x 7/8", 20mm
Single row
4" x 5/8" -11
Single row
4" x 7/8", 20mm
Double row
4" x 5/8" -11
Double row
5" x 5/8" -11
Single row
5" x 5/8" -11
Double row
7" x 5/8" -11
Single row
7" x 5/8" -11
Double row
GC 24
GENERAL PURPOSE
Applications:
Concrete, Brick, Block, Precast materials, Stone,
Masonry surfaces.
Dry cutting continous rim tile blades
DT 30
GENERAL PURPOSE
Applications:
Tiles, Ceramics.
Standard:
Low cost, economical blade for all around use.
Premium:
Contractors’ choice, long life. Will stand up to
frequent day to day use.
Extra Premium:
Higher diamond concentration provides extended
life under extreme usage.
73
8
DIAMOND PRODUCTS
HOLE SAW BITS
Laser welded diamond core bits - wet
Diameter
Quality
1"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
1-5/8"
1-3/4"
1-7/8"
Premium
Premium
Premium
Premium
Premium
Premium
Premium
Premium
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
2"
2-1/4"
2-1/2"
2-3/4"
3"
3-1/4"
DO NOT USE DRY
DO NOT USE WITH
HAMMER DRILL.
3-1/2"
4"
4-1/4"
4-1/2"
5"
5-1/2"
6"
6-1/4"
6-1/2"
Code + Spec
DB 24
DB 30
N2001P
N2002P
N2003P
N2004P
N2005P
N2006P
N2007P
N2008P
N2009S
N2010P
N2011S
N2012P
N2013S
N2014P
N2015S
N2016P
N2017S
N2018P
N2019S
N2020P
N2021S
N2021P
N2022S
N2023P
N2024S
N2025P
N2026S
N2027P
N2028S
N2029P
N2030S
N2031P
N2032S
N2033P
N2034S
N2035P
N2036S
N2037P
N2500P
N2501P
N2502P
N2503P
N2504P
N2505P
N2506P
N2507P
DB 24
GENERAL PURPOSE
Applications:
N2508P
Reinforced concrete, Brick.
N2509P
Basic core bits have a 13” maximum drilling depth but
extra length bits are available on request at an
additional cost per inch.
Cured concrete, Block, Precast materials, Asphalt.
DB 30
HARD MATERIALS
Applications:
N2510P
N2511P
N2512P
N2513P
1” to 1-1/2 bits: 5/8” - 11 thread.
1-5/8” and larger bits: 1-1/4” - 7 thread.
All diameters are nominal.
Extra tolerances upon request.
N2514P
N2515P
N2516P
N2517P
N2518P
N2519P
N2520P
N2521P
N2522P
MEASURING GAUGE
Gauge and adaptor
Dimensions
Blade gauge with digital micrometer
Diamond core bit adaptor kit
Code
N980
N982
DIGITAL MICROMETER
DIAL INDICATOR
74
8
DIAMOND PRODUCTS
HOLE SAW BITS
Laser welded diamond core bits - wet
Diameter
Code + Spec
DB 24
DB 30
10"
12"
14"
16"
18"
20"
24"
Standard
Premium
Standard
Premium
Standard
Premium
Standard
Premium
Premium
Premium
Premium
Premium
Premium
Premium
N2038S
N2039P
N2040S
N2041P
N2042S
N2043P
N2044S
N2045P
N2047P
N2049P
N2051P
N2053P
N2055P
N2057P
N2526P
N2527P
N2528P
N2529P
N2530P
N2531P
N2532P
Length
4"
6"
6"
12"
12"
Diameter
1-5/8" Plus
1" to 1-1/2"
1-5/8" Plus
1" to 1-1/2"
1-5/8" Plus
Thread
1-1/4" -7
5/8" -11
1-1/4" -7
5/8" -11
1-1/4" -7
Code
N5000
N5001
N5002
N5003
N5004
7"
8"
9"
DO NOT USE DRY
DO NOT USE WITH
HAMMER DRILL.
Quality
N2523P
DB 24
GENERAL PURPOSE
Applications:
Cured concrete, Block, Precast materials.
N2524P
N2525P
DB 30
HARD MATERIALS
Applications:
Reinforced concrete, Brick.
Basic core bits have a 13” maximum drilling depth but
extra length bits are available on request at an
additional cost per inch. Core bits 14” and above have
an additional 2” interior depth per diameter of the bit.
(Ex. 14” has 16” interior depth, 16” has 18” interior
depth, etc.)
Bits 26” and above upon request.
All diameters are nominal.
Extra tolerances upon request.
1-5/8” and larger bits: 1-1/4” - 7 thread.
Core bit extensions
Can be used to provide additional coring depth
when needed.
Thread adaptors
Dimensions
1-1/4" -7 to 5/8" -11
5/8" -11 to 1-1/4" -7
Code
N5005
N5006
Thread
Code
Use these to modify the thread size of core bits on
pages 74 and 75.
Bit adaptors
5/8" -11 Male thread (3 slot)
N5011QR
1-1/4" -7 Male thread (3 slot)
N5010QR
1-1/4" -7 Male thread (6 slot)
N5012QR
5/8" -11 Male thread (6 slot)
N5013QR
5/8" -11 Male thread to Hilti Spline
N5014QR
1-1/4" -7 Male thread to Hilti Spline
N5015QR
To adapt standard bits to Hilti machines.
75
8
DIAMOND PRODUCTS
Dry cutting segmented blades concrete
Dimensions
12" x .110" x 1"
12" x .110" x 20mm
14" x .125" x 1"
14" x .125" x 20mm
Code
N024 PLUS
N024 PLUS2
N023 PLUS
N023 PLUS2
GENERAL PURPOSE
Applications:
Concrete, Paving stones, Concrete pipe, Block.
Dry cutting segmented blades concrete
Dimensions
12" x .125" x 1"
12" x .125" x 20mm
14" x .125" x 1"
14" x .125" x 20mm
16" x .125" x 1", 20mm
Code
N022 PRO
N022 PRO2
N023 PRO
N023 PRO2
N028 PRO
HEAVY DUTY
Applications:
Concrete, Paving stones, Concrete pipe, Block.
Dry cutting segmented blades asphalt
Dimensions
12" x .125" x 1"
12" x .125" x 20mm
14" x .125" x 1"
14" x .125" x 20mm
16" x .140" x 1", 20mm
Code
N026 PRO
N026 PRO2
N027 PRO
N027 PRO2
N029 PRO
Applications:
Dry cutting segmented blades combination concrete and asphalt
Dimensions
12" x .125" x 1"
12" x .125" x 20mm
14" x .125" x 1"
14" x .125" x 20mm
Code
N900 COM
N900 COM2
N901 COM
N901 COM2
Applications:
Concrete, Asphalt.
Dry cutting duo segmented blades combination concrete and blocks
Dimensions
12" x .125" x 1", 20mm
14" x .125" x 1", 20mm
76
Code
N902DS COM
N901DS COM
Applications:
Concrete.
8
DIAMOND PRODUCTS
Dry cutting turbo blades for high speed and masonry saws
Dimensions
12" x .125" x 1", 20mm
14" x .125" x 1", 20mm
Code
N050 PRO
N051 PRO
Applications:
Granite, Marble, Extremely hard materials.
Dry cutting turbo blades for high speed and masonry saws
Dimensions
10" x .110" x dia-5/8"
12" x .110" x 1", 20mm
14" x .110" x 1", 20mm
Code
N046 PRO
N047 PRO
N048 PRO
Applications:
Concrete, Brick, Paving stones, Concrete pipe,
Precast and prestressed materials, Block.
DIAMOND PRODUCTS
HIGH SPEED AND MASONRY BLADES
* soft materials
** hard materials
Dry cutting blades for high speed or masonry saws
Dimensions
10" x .110" x 1", 5/8"
12" x .125" x 1"
14" x .125" x 1"
20" x .125" x 1" *
20" x .125" x 1" **
Code
N010 PRO
N011 PRO
N012 PRO
N013 PRO
N014 PRO
GENERAL PURPOSE
Applications:
Concrete, Brick, Block, Paving stones, Precast and
Prestressed materials.
Dry cutting combo blades for high speed or masonry saws
Dimensions
12" x .125" x 1"
12" x .125" x 20mm
14" x .125" x 1"
14" x .125" x 20mm
Code
N570 PRO
N570 PRO2
N571 PRO
N571 PRO2
COMBO HIGH PERFORMANCE
Applications:
Brick, Hard paving stones, Block, Concrete.
CAN BE USED WET.
RING SAW BLADES
Wet and dry cutting segmented blades concrete
Dimensions
14" x .140"
Code
N1005 PRO
Applications:
Concrete, Concrete pipe, precast concrete.
77
8
DIAMOND PRODUCTS
Wet asphalt cutting blades for walk behind saws
Dimensions
14" x .125" x 1" (ph)
16" x .160" x 1" (ph)
18" x .160" x 1" (ph)
20" x .160" x 1" (ph)
24" x .155" x 1" (ph)
Code
N091 PRO
N092 PRO
N093 PRO
N030 PRO
N808 PRO
GENERAL PURPOSE
Applications:
Wet concrete cutting blades for walk behind saws
Dimensions
14" x .125" x 1" (ph)
16" x .160" x 1" (ph)
18" x .160" x 1" (ph)
24" x .160" x 1" (ph)
Code
N090 PRO
N094 PRO
N095 PRO
N096 PRO
Applications:
Dry cutting walk behind blades for intermittent use
Dimensions
14" x .125" x 1" (ph) Asphalt
14" x .125" x 1" (ph) Concrete
GENERAL PURPOSE
Applications:
Cured concrete, Reinforced cured concrete.
Code
N1000 PRO
N1001 PRO
Cured concrete, Soft to medium aggregate,
GENERAL PURPOSE
Designed to make INTERMITTENT dry cuts in cured concrete. For
edge trimming, demolition and repair work. Do not use on self
propelled saws above 18 H.P
Dry cutting small diameter granite cutting blades
Dimensions
4" x .070" x 7/8", 5/8"
4-1/2" x .070" x 7/8", 5/8"
5" x .070" x 7/8", 5/8"
7" x .070" x 7/8", 5/8"
Code
N052 PRO
N053 PRO
N054 PRO
N056 PRO
HARD MATERIALS
Applications:
Granite, Marble, Very hard materials.
Code
N040 PRO
N041 PRO
N043 PRO
N045 PRO
N042 PRO
TURBO/GENERAL PURPOSE
Applications:
Concrete, Brick, Block, Paving stones.
Code
N001 PRO
N002 PRO
N005 PRO
N003 PRO
N004 PRO
GENERAL PURPOSE
Applications:
Concrete, Brick, Asphalt, Paving stones, Block.
Dry cutting small diameter turbo blades
Dimensions
4" x .070" x 7/8", 5/8"
4-1/2" x .085" x 7/8", 5/8"
5" x .085" x 7/8", 5/8"
6" x .085" x 7/8", 5/8"
7" x .085" x 7/8", 5/8"
Dry cutting small diameter segmented blades
Dimensions
4" x .087" x 7/8", 5/8"
4-1/2" x .087" x 7/8", 5/8"
5" x .087" x 7/8", 5/8"
7" x .087" x 7/8", 5/8"
8" x .080" x dia-7/8", 5/8"
78
8
DIAMOND PRODUCTS
Dry cutting small diameter turbo blades
Dimensions
4" x .070" x 7/8", 5/8"
4-1/2" x .085" x 7/8", 5/8"
5" x .085" x 7/8", 5/8"
6" x .085" x 7/8", 5/8"
7" x .085" x 7/8", 5/8"
8" x .100" x 7/8", 5/8"
Code
N040 PLUS
N041 PLUS
N043 PLUS
N045 PLUS
N042 PLUS
N0423 PLUS
TURBO/GENERAL PURPOSE
Applications:
Concrete, Brick, Block, Paving stones.
Dry cutting small diameter segmented blades
Dimensions
4" x .087" x 7/8", 5/8"
4-1/2" x .087" x 7/8", 5/8"
5" x .087" x 7/8", 5/8"
7" x .087" x 7/8", 5/8"
8" x .087" x 7/8", 5/8"
Code
N001 PLUS
N002 PLUS
N005 PLUS
N003 PLUS
N004 PLUS
GENERAL PURPOSE
Applications:
Concrete, Brick, Asphalt, Paving stones, Block.
DIAMOND PRODUCTS
CONTINUOUS RIM TILE BLADES
Dry or wet cutting continuous rim tile blades
Dimensions
4-1/2" x .060" x 7/8", 5/8"
7" x .060" x 7/8", 5/8"
8" x .060" x 5/8"
9" x .060" x 5/8", 10mm
10" x .060" x 5/8"
12" x .080" x 1" tile
Code
N036 PLUS
N034 PLUS
N031 PLUS
N0391 PLUS
N032 PLUS
N037 PLUS
FAST CUTTING
ceramics and porcelain. Can be used dry or wet on
circular saws or tile tub saws.
Applications:
Tile, Ceramic, Marble, Granite, Porcelain.
Dry or wet cutting continuous rim tile blades
Dimensions
3-3/8" x 1.2mm x 15mm
4" x .060" x 7/8", 5/8"
4-1/2" x .060" x 7/8", 5/8"
7" x .060" x 5/8"
8" x .060" x 5/8"
8" x .060" x 1"
10" x .060" x 5/8"
10" x .060" x 1"
12" x .080" x 1"
14" x .090" x 1"
Code
N033 PRO
N035 PRO
N036 PRO
N034 PRO
N031 PRO
N031 PRO1
N032 PRO
N032 PRO1
N037 PRO
N038 PRO
FAST CUTTING
ceramics and porcelain. Can be used dry or wet on
circular saws or tile tub saws.
Applications:
Tile, Ceramic, Marble, Granite, Porcelain.
79
8
DIAMOND PRODUCTS
SMALL DIAMETER TUCK POINT BLADES
Dry cutting tuck point blades for motar joints
Dimensions
4" x .250" x 7/8", 5/8"
4-1/2" x .250" x 7/8", 5/8"
5" x .250" x 7/8", 5/8"
7" x .250" x 7/8", 5/8"
Code
N073 PLUS
N070 PLUS
N071 PLUS
N072 PLUS
Application:
Mortar joints.
Dry cutting tuck point blades for motar joints
Dimensions
4-1/2" x .250" x 7/8", 5/8"
5" x .250" x 7/8", 5/8"
7" x .250" x 7/8"
Code
N070 PRO
N071 PRO
N072 PRO
LONGER LASTING
Application:
Mortar joints.
Dry cutting sandwich type tuck point
Dimensions
4" x .250" x 7/8", 5/8"
4-1/2" x .250" x 7/8", 5/8"
5" x .250" x 7/8", 5/8"
Code
N073 TUCK
N070 TUCK
N071 TUCK
Sandwich type tuck point offers faster removal of
mortar in joints.
Application:
Mortar joints.
Dry cutting blades for motar joints (V model)
Dimensions
4" x .375" x 7/8", 5/8"
5" x .375" x 7/8", 5/8"
7" x .375" x 7/8", 5/8"
80
Code
N080 PLUS
N081 PLUS
N082 PLUS
“V” shaped segments makes it easier to get in
between the joints.
Application:
Mortar joints.
8
DIAMOND PRODUCTS
CUP WHEELS TURBO AND SEGMENTED
Cup wheels - Single row
Dimensions
4" x 7/8", 5/8", 20mm
4-1/2" x 5/8"-11
7" x 5/8"-11
Code
N065 PRO
N065 PRO58
N061 PRO
GENERAL PURPOSE
Applications:
Masonry surfaces.
Cup wheels - Double row
Dimensions
4" x 7/8", 5/8", 20mm
7" x 5/8"-11
Code
N064 PRO
N066 PRO
GENERAL PURPOSE
Applications:
Masonry surfaces.
Cup wheels turbo seg
Dimensions
4" x 5/8"-11 - Turbo 9 segs
4-1/2" x 5/8"-11 - Turbo 9 segs
4-1/2" x 7/8" - Turbo 18 segs
7" x 5/8"-11 - Turbo 12 segs
7" x 7/8", 5/8" - Turbo 24 segs
7" x 5/8"-11 - Turbo 24 segs
Code
N063 PRO
N068 PRO
N067 PRO
N069 PRO
N059 PRO78
N059 PRO
Dimensions
4" x 5/8"-11
7" x 5/8"-11
Code
N060 PRO
N062 PRO
GENERAL PURPOSE
FASTER REMOVAL
Applications:
Masonry surfaces.
Cup wheels turbo
GENERAL PURPOSE
FASTER REMOVAL
Applications:
Ceramic, Marble, Concrete
CORE BITS
Brazed diamond core bits - wet
Diameter
1"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
4-1/2"
5"
6"
Code
N1401 PRO
N1402 PRO
N1403 PRO
N1404 PRO
N1405 PRO
N1406 PRO
N1407 PRO
N1408 PRO
N1409 PRO
N1411 PRO
GENERAL PURPOSE
Applications:
Cured or green concrete, Block, Precast materials,
Asphalt, Brick, Clay pavers, Field stone. 1" to 1-1/2"
bits: 5/8"-11 thread. 2" and larger bits: 1-1/4"-7"
thread. 14" shank length.
DO NOT USE DRY
DO NOT USE WITH HAMMER DRILL.
81
8
DIAMOND PRODUCTS
CORE BITS AND POLISHING PADS
Core bits wet or dry
Dimensions
1" x 1/4"
1-1/8" x 1/4"
1-1/4" x 1/4"
1-3/8" x 1/4"
1-1/2" x 1/4"
1-3/4" x 1/4"
2" x 1/4"
Code
N1300 PRO
N1301 PRO
N1302 PRO
N1303 PRO
N1304 PRO
N1305 PRO
N1306 PRO
Core bits kit wet or dry
Dimensions
Core Bit Kit
Code
N1310 KIT
Kit include the 7 sizes shown above
Core bits with 5/8”-11 thread
Dimensions
1" x 5/8"-11
1-1/8" x 5/8"-11
1-1/4" x 5/8"-11
1-3/8" x 5/8"-11
1-1/2" x 5/8"-11
1-3/4" x 5/8"-11
2" x 5/8"-11
Code
N1300 GRAN
N1301 GRAN
N1302 GRAN
N1303 GRAN
N1304 GRAN
N1305 GRAN
N1306 GRAN
Polishing pads wet
82
Dimensions
4" polishing pad
4" polishing pad
4" polishing pad
4" polishing pad
4" polishing pad
4" polishing pad
4" polishing pad
4" polishing pad
Grit
150
300
500
1000
2000
3000
Black
White
Code
N4000
N4001
N4002
N4010
N4020
N4030
N4BLACK
N4WHITE
Dimensions
4" x 5/8"-11
Spec.
Velcro holder
Code
PB46S
GENERAL PURPOSE
Last longer than electroplated core bits.
Easy to use.
Applications:
Drilling stone, Ceramics, Marble, Granite, Masonry,
Tiles, Brick.
GENERAL PURPOSE
Last longer than electroplated core bits. Easy to use.
Applications:
Tiles, Brick.
GENERAL PURPOSE
Last longer than electroplated core bits.
Easy to use.
Applications:
Tiles, Brick.
GENERAL PURPOSE
Radial groove pattern increases flexibility and
water flow.
Applications:
Polishing, Finishing.
9
ACCESSORIES
Bushings
Dimensions
1" to 20mm
1" to 7/8"
N to 5/8"
1-1/4" x 1" to 1/2"
1" x 1" to 1/2"
1" x 3/4" to 1/2"
Code
K001
K002
K005
K011
K013
K014
Specifications
Metal
Metal
Metal
Plastic
Plastic
Plastic
Permanent adaptor kit
Dimensions
5/8" -11 adaptor
Code
K033
Specifications
Permanent
Application:
Stamped metal bushing for cut-off wheels.
Application:
Nested plastic bushings for vitrified wheels.
Applications:
Adapts 7" and 9" type 27 or type 28 wheels to
angle grinders. Hex key and spacers supplied.
Backing holder
Dimensions
For discs
2"
For discs
3"
For discs
4"
Code
PB2S
PB2T
PB3S
PB3T
PB4S
PB4T
Application
For screw-on 1/4 " shank
For twist-on 1/4 " shank
Applications:
These holders can be used with any mini resin
fibre or surface conditioning discs. PB2S or PB3S
are for mini discs with a screw on attachment. The
PB2T and PB3T are for mini discs with a twist on
attachment.
83
9
ACCESSORIES
Nylon backing pads complete with lock-nuts
Dimensions
4" x M10 x 1.25
4-1/2" x M14 x 2.00
4-1/2" x 5/8" -11
5" x M14 x 2.00
5" x 5/8" -11
7" x 5/8" -11
Code
K1001
K1002
K1003
K1004
K1005
K1006
Specifications
76 - 10M
104 - 14M
104 - W
116 - 14M
116 - W
171 - W
Rubber spiral-cool backing pads complete with lock-nuts
Dimensions
4-1/2" x 5/8" -11
5" x 5/8" -11
7" x 5/8" -11
9" x 5/8" -11
Code
K051
K052
K053
K054
Specifications
Spy-back pad
Spy-back pad
Spy-back pad
Spy-back pad
LIGHT WEIGHT- VERY FLEXIBLE
Made with high quality nylon for easy handling
and flexibility.
Application:
Resin fiber discs.
Use with key K1014 or KO55.
HEAVY DUTY - LONG LIFE
Special spirals cool the back of the disc to
increase life.
Applications:
Resin fiber discs and spiral ribbed flexible
grinding discs.
Use with key K055 only.
Backing pad pin spanners
Dimensions
Nylon pads
Spiral Universal
HEAVY DUTY
Application:
Installing or removing nuts on backing pads. Color
coded for thread sizes.
Code
K1014
K055
Adaptors
"MT" Series
Dimensions
1/4" to 1/4" x 2-1/2"
1/4" to 3/8" x 2-1/2"
1/4" to 1/4" x 2-1/2"
1/4" to 3/8" x 2-1/2"
Code
M1414MT
M1438MT
M1414B
M1438B
Thickness
0 - 5/8"
0 - 5/8"
0 - 1/4"
0 - 1/4"
"B" Series
FOR PENCIL AND DIE GRINDERS.
Application:
To be used with our small cut-off wheels that have
a code beginning with an S, found on page 16.
Ex: M 1438 MT or B
use with S 303 F
"MT" Series
"B" Series
Mandrels
Dimensions
1/4" x 1/4"
1/2" x 8mm
Code
M1414S
M1208S
Box
10
10
"Q" Series
MF 3
84
Mandrels for straight
grinders and drills
"S" Series
Mandrel
Mandrel
PB4Q
MF3
For quick trim 1/4" shank
For 3" Poly-flap
9
ACCESSORIES
Mandrel for crimped wire or flat cotton wheels with 1/2” center hole
Dimensions
1/2" x 5/16" 1/4"
Wire
Mandrel
Code
M12516S
R.P.M.
4 500
Box
1
Nylon backing pad
Dimensions
4" x M10 x 1.25
4-1/2" x 5/8" -11
5" x M14 x 2.00
5" x 5/8" -11
7" x 5/8" -11
Wire
Nylon
Nylon
Nylon
Nylon
Nylon
Code
K1007AP
K1003AP
K1004AP
K1005AP
K1006AP
R.P.M.
4 500
4 500
4 500
4 500
4 500
Box
1
1
1
1
1
Thread adaptor for brushes
Dimensions
5/8" -11 to 3/8" -24
5/8" -11 to M10 x 1.25
5/8" -11 to M10 x 1.5
Code
YM006
YM007
YM008
Specifications
Threaded adaptor
Threaded adaptor
Threaded adaptor
Box
1
1
1
Applications:
Use with our cotton wheels and crimped flat
circular brushes.
Applications:
Manufactured with nylon for easy handling and
flexibility. Use with our resin fiber discs.
Applications:
Used to adapt 5/8 -11” threaded brush to a
differently threaded spindle.
85
ALPHA-NUMERICAL INDEX
A
86
A001P
A003P
A004P
A005P
A011P
A012P
A014P
A015P
A021P
A024P
A025P
A032P
A036P
A037P
A038P
A039P
A041P
A044P
A052P
A063P
A093P
A111P
A121P
A131P
A134P
A135P
A136P
A145P
A146P
A154P
A160P
A163P
A164P
A168P
A170P
A177P
A179P
A185P
A187P
A188P
A196P
A204P
A205P
A208P
A217P
A220P
A221P
A225P
A236P
A237P
A238P
A242P
B
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
27
B0710
B0712C/P
B0716C/P
B0720C/P
B0724C/P
B0736
B0740
B0750
B0760
B0780
B0810
B0812
B0816C/P
B0820C/P
B0824C/P
B0836
B0840
B0850
B0860
B0880
B1210
B1212
B1216C/P
B1220C/P
B1224C/P
B1236
B1240
B1250
B1260
B1280
B1510
B1512C/P
B1516C/P
B1520C/P
B1524C/P
B1536
B1540
B1550
B1560
B1580
B1610
B1612C
B1616C
B1620C
B1624C
B1636
B1640
B1650
B1660
B1680
B1710
B1712C/P
B1716C/P
49
49
49
49
49
49
49
49
49
49
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
B1720C/P
B1724C/P
B1736
B1740
B1750
B1760
B1780
B1810
B1816C/P
B1820C/P
B1824C/P
B1836
B1860
B1880
B1910
B1912C/P
B1916C/P
B1920C/P
B1924C/P
B1936
B1940
B1950
B1960
B1980
B2010
B2012C/P
B2016C/P
B2020C/P
B2024C/P
B2036
B2040
B2050
B2060
B2080
B2410
B2420C/P
B2424C/P
B2436
B2460
B2480
B3610
B3612
B3616C/P
B3620C/P
B3624C/P
B3636
B3640
B3650
B3660
B3680
B41512
B41524C
B41536
B41550
B41580
47
47
47
47
47
47
47
45
45
45
45
45
45
45
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
B4510
B4512
B4516C/P
B4520C/P
B4524C/P
B4536
B4540
B4550
B4560
B4580
B5210
B5212
B5216C/P
B5220C/P
B5224C/P
B5236
B5240
B5250
B5260
B5280
BDC60010
BDC60012
BDC60036
BDC60040
BDC60060
BDC60080
BDC67510
BDC67512
BDC67536
BDC67540
BDC67560
BDC67580
BDT05006
BDT05008
BDT05010
BDT05012
BDT06006
BDT06008
BDT06010
BDT06012
BDT08006
BDT08008
BDT08010
BDT08012
BDT09006
BDT09008
BDT09010
BDT09012
BDT12006
BDT12008
BDT12010
BDT12012
BDV0512
BDV0515
BDV0518
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
48
48
48
48
48
48
48
48
48
48
48
48
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
BDV0522
BDV0524
BDV0532
BDV0540
BDV0560
BDV0580
BDV0612
BDV0615
BDV0618
BDV0622
BDV0624
BDV0632
BDV0640
BDV0660
BDV0680
BFC901110
BFC901112
BFC901115
BFC901118
BFC901122
BFC901124
BFC901128
BFD901104
BFD901106
BFD901108
BFE901105C
BFE901108M
BFE901112F
BFL901108
BFL901110
BFL901112
BFL901180
BFL901122
BFL901124
BFL901128
BFL901132
BFT901104
BFT901105
BFT901106
BFT901108
BFT901110
BFT901112
BFT901115
BFT901118
BFT901122
BFT901124
BFT901132
BFW901118
BFW901122
BFW901124
BFW901132
BFW901140
BFW901160
BFW901200
BFX901110
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
33
33
33
33
33
33
33
33
33
33
32
32
32
32
32
32
32
32
32
32
32
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
33
BFX901112
BFX901115
BPSA1516C/P
BPSA1524C/P
BPSA1540
BPSA1580
BPSA1716C/P
BPSA1724C/P
BPSA1740
BPSA1780
33
33
48
48
48
48
48
48
48
48
C
C8910
C8912
C8924
C8936
C8940
C8950
C8960
C8980
CB21X
CB22X
CB41X
CB42X
CB47X
CB61X
CB77X
CS301802
CS301803
CS301804
CS301805
CS301806
CS301808
CS301810
CS301812
CS302102
CS302103
CS302104
CS302105
CS302106
CS302108
CS302110
CS302112
CS302402
CS302403
CS302404
CS302405
CS302406
CS302408
CS302410
CS302412
CS402402
CS402403
CS402404
CS402405
46
46
46
46
46
46
46
46
64
64
64
64
64
64
64
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
CS402406
CS402408
CS402410
CS402412
CS403602
CS403603
CS403604
CS403605
CS403606
CS403608
CS403610
CS403612
CS604802
CS604803
CS604804
CS604805
CS604806
CS604808
CS604810
CS604812
CW7729502
CW7729504
CW7729505
CW7729508
CW7729512
CZ02018036
CZ02018040
CZ02018050
CZ02018060
CZ02018080
CZ02018100
CZ02018120
CZ02024036
CZ02024040
CZ02024050
CZ02024060
CZ02024080
CZ02024100
CZ02024120
CZ03013036
CZ03013040
CZ03013050
CZ03013060
CZ03013080
CZ03013100
CZ03013120
CZ04012036
CZ04012040
CZ04012050
CZ04012060
CZ04012080
CZ04012100
CZ04012120
CZ04018036
CZ04018040
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
34
46
46
46
46
46
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
CZ04018050
CZ04018060
CZ04018080
CZ04018100
CZ04018120
CZ04024036
CZ04024040
CZ04024050
CZ04024060
CZ04024080
CZ04024100
CZ04024120
CZ06018036
CZ06018040
CZ06018050
CZ06018060
CZ06018080
CZ06018100
CZ06018120
CZ06020036
CZ06020040
CZ06020050
CZ06020060
CZ06020080
CZ06020100
CZ06020120
CZ08012036
CZ08012040
CZ08012050
CZ08012060
CZ08012080
CZ08012100
CZ08012120
CZ08021036
CZ08021040
CZ08021050
CZ08021060
CZ08021080
CZ08021100
CZ08021120
CZ08030036
CZ08030040
CZ08030050
CZ08030060
CZ08030080
CZ08030100
CZ08030120
CZ08042024
CZ08042036
CZ08042040
CZ08042050
CZ08042060
CZ08042080
CZ08042100
CZ08042120
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
CZ12060036
CZ12060040
CZ12060050
CZ12060060
CZ12060080
CZ12060100
CZ12060120
CZ16048036
CZ16048040
CZ16048050
CZ16048060
CZ16048080
CZ16048100
CZ16048120
CZ16060036
CZ16060040
CZ16060050
CZ16060060
CZ16060080
CZ16060100
CZ16060120
CZ16072036
CZ16072040
CZ16072050
CZ16072060
CZ16072080
CZ16072100
CZ16072120
CZ16132036
CZ16132040
CZ16132050
CZ16132060
CZ16132080
CZ16132100
CZ16132120
CZ20060036
CZ20060040
CZ20060050
CZ20060060
CZ20060080
CZ20060100
CZ20060120
CZ24018024
CZ24018036
CZ24018040
CZ24018050
CZ24018060
CZ24018080
CZ24018100
CZ24018120
CZ24021024
CZ24021036
CZ24021040
CZ24021050
CZ24021060
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
37
37
37
37
37
37
37
37
37
37
37
37
37
CZ24021080
CZ24021100
CZ24021120
CZ24024024
CZ24024036
CZ24024040
CZ24024050
CZ24024060
CZ24024080
CZ24024100
CZ24024120
CZ24060036
CZ24060040
CZ24060050
CZ24060060
CZ24060080
CZ24060100
CZ24060120
CZ24132036
CZ24132040
CZ24132050
CZ24132060
CZ24132080
CZ24132100
CZ24132120
CZ28015036
CZ28015040
CZ28015050
CZ28015060
CZ28015080
CZ28015100
CZ28015120
CZ32021024
CZ32021036
CZ32021040
CZ32021050
CZ32021060
CZ32021080
CZ32021100
CZ32021120
CZ32024024
CZ32024036
CZ32024040
CZ32024050
CZ32024060
CZ32024080
CZ32024100
CZ32024120
CZ32036024
CZ32036036
CZ32036040
CZ32036050
CZ32036060
CZ32036080
CZ32036100
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
37
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
CZ32036120
CZ32048036
CZ32048040
CZ32048050
CZ32048060
CZ32048080
CZ32048100
CZ32048120
CZ32054036
CZ32054040
CZ32054050
CZ32054060
CZ32054080
CZ32054100
CZ32054120
CZ32060036
CZ32060040
CZ32060050
CZ32060060
CZ32060080
CZ32060100
CZ32060120
CZ32132036
CZ32132040
CZ32132050
CZ32132060
CZ32132080
CZ32132100
CZ32132120
CZ48048024
CZ48048036
CZ48048040
CZ48048050
CZ48048060
CZ48048080
CZ48048100
CZ48048120
CZ48132036
CZ48132040
CZ48132050
CZ48132060
CZ48132080
CZ48132100
CZ48132120
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
D
D207A
D207KR
D207M
D207Q
D237R
D237V
D237X
D238V
D238X
9
9
9
9
10
11
11
11
11
D247A
D247C
D247KR
D247MS
D247PRO
D247R
D247V
D247X
D247Z
D248A
D248C
D248KR
D248MS
D248PRO
D248R
D248V
D248X
D248Z
D287C
D287KC
D287KR
D287P3
D287R
D287Z3
D288C
D288KC
D288KR
D288P3
D288R
D288Z3
D343R
D383R
D405A
D405KR
D405M
D405Q
D435V
D435X
D443R
D445C
D445KR
D445R
D445V
D445X
D445Z
D483R
D485KC
D485KR
D485P3
D485R
D507A
D507KR
D507M
D507Q
D537R
7
7
6
5
5
5
7
6
6
7
7
6
5
5
5
7
6
6
10
11
10
8
10
8
10
11
10
8
10
8
5
10
9
9
9
9
11
11
5
7
6
5
7
6
6
10
11
10
8
10
9
9
9
9
10
D537V
D537X
D538V
D538X
D547A
D547C
D547KR
D547MS
D547PRO
D547R
D547V
D547X
D547Z
D548A
D548C
D548KR
D548MS
D548PRO
D548R
D548V
D548X
D548Z
D577C
D587C
D587KC
D587KR
D587P3
D587R
D587Z3
D588C
D588KC
D588KR
D588P3
D588R
D588Z3
D607A
D607KR
D607M
D607Q
D637V
D638V
D647C
D647KR
D647MS
D647R
D647V
D647X
D648C
D648KR
D648MS
D648R
D648V
D648X
D677C
D687C
11
11
11
11
7
7
6
5
5
5
7
6
6
7
7
6
5
5
5
7
6
6
11
10
11
10
8
10
8
10
11
10
8
10
8
9
9
9
9
11
11
7
6
5
5
7
6
7
6
5
5
7
6
11
10
D687KR
D687P3
D687R
D688C
D688KR
D688P3
D688R
D707A
D707M
D707Q
D727C
D737R
D737V
D737X
D738V
D738X
D747A
D747C
D747KR
D747MS
D747R
D747T
D747V
D747X
D747Z
D748A
D748C
D748KR
D748MS
D748R
D748T
D748V
D748X
D748Z
D787C
D787KC
D787KR
D787P3
D787R
D787T3
D787Z3
D788C
D788KC
D788KR
D788P3
D788R
D788T3
D788Z3
D917Q
D918Q
D937V
D938V
D947C
D947KR
D947MS
10
8
10
10
10
8
10
9
9
9
11
10
11
11
11
11
7
7
6
5
5
6
7
6
6
7
7
6
5
5
6
7
6
6
10
11
10
8
10
8
8
10
11
10
8
10
8
8
9
9
11
11
7
6
5
87
D947R
D947T
D947V
D947X
D947Z
D948C
D948KR
D948MS
D948R
D948T
D948V
D948X
D948Z
D987C
D987KC
D987KR
D987P3
D987R
D987T3
D987X
D987Z3
D988C
D988KC
D988KR
D988P3
D988R
D988T3
D988X
D988Z3
5
6
7
6
6
7
6
5
5
6
7
6
6
10
11
10
8
10
8
11
8
10
11
10
8
10
8
11
8
E
E727C
E747C
E747R
E748C
E748R
E947C
E947R
E948C
E948R
11
7
5
7
5
7
5
7
5
F231KR
F231MS
F231R
F231SP
F231X
F281C
F281N
F281R
F281X
F431A
F431C
F431KR
F431MS
F431R
F431SP
F431X
F451C
F451N
F451R
F451X
F631C
F631MS
F631KR
F631R
F651C
F651R
F651X
F681A
F681SP
F681X
F861C
F861R
F861X
17
17
17
18
18
19
19
19
19
18
17
17
17
17
18
18
19
19
19
19
17
17
17
17
19
19
19
18
18
18
19
19
19
G
GYC315AP
GYC415AP
GYG315AP
GYG415AP
GYH305AP
GYH405AP
54
54
54
54
54
54
F
88
F061C
F061F3
F061N
F061N3
F061R
F061R3
F061X
F061Z3
F131N
F131X
F181C
F231A
F231C
19
18
19
19
19
19
19
18
19
19
19
18
17
H
H216C
H224C
H516C
H524C
H716C
H724C
24
24
24
24
24
24
I
I236A
I260A
I536A
I560A
24
24
24
24
I736A
I760A
24
24
J
J132B
J132G
J132R
J132T
J132W
J1510
J1512
J1515
J152B
J152G
J152R
J152T
J152W
J1560
J1580
J1610
J1612
J1615
J162B
J162G
J162R
J162T
J162W
J1660
J1680
J1710
J1712
J1715
J172B
J172G
J172R
J172T
J172W
J1760
J1780
J1810
J1812
J1815
J182B
J182G
J182R
J182T
J182W
J1860
J1880
J1910
J1912
J1915
J192B
J192G
J192R
49
49
49
49
49
50
50
50
49
49
49
49
49
50
50
50
50
50
49
49
49
49
49
50
50
50
50
50
49
49
49
49
49
50
50
50
50
50
49
49
49
49
49
50
50
50
50
50
49
49
49
J192T
J192W
J1960
J1980
J2010
J2012
J2015
J202B
J202G
J202R
J202T
J202W
J2060
J2080
J2410
J2412
J2415
J242B
J242G
J242R
J242T
J242W
J2460
J2480
49
49
50
50
50
50
50
49
49
49
49
49
50
50
50
50
50
49
49
49
49
49
50
50
K
K001
K002
K005
K011
K013
K014
K033
K051
K052
K053
K054
K055
K0600
K0604
K0606
K0608
K061
K062
K063
K064
K0680
K1001
K1002
K1003
K1003AP
K1004
K1004AP
K1005
K1005AP
83
83
83
83
83
83
83
84
84
84
84
84
25
25
25
25
25
25
25
25
25
84
84
84
85
84
85
84
85
K1006
K1006AP
K1007AP
K1014
84
85
85
84
L
L116A
L116B
L116D
L116E
L116F
L116G
L116H
L224A
L224B
L224D
L244A
L244B
L244D
L324A
L324B
L324D
L571B
L571C
L571E
L611A
L611B
L611C
L611D
L611E
L611F
L611G
L611H
L671A
L671B
L671C
L671D
L671E
L671F
L671G
L671H
L716B
L716D
L716E
L716F
L716G
L716H
L816A
L816B
L816D
L816E
L816F
L816G
L816H
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
M
M1208S
M12516S
M135R
M1414B
M1414MT
M1414S
M1438B
M1438MT
M185C
M207A
M207KR
M207M
M207Q
M207SI
M207U
M237C
M237KC
M237KR
M237R
M405A
M405KR
M405M
M405Q
M435C
M435KC
M435KR
M435R
M507A
M507KR
M507M
M507Q
M507SI
M507U
M537C
M537KC
M537KR
M537R
M607A
M607KR
M607M
M607Q
M607U
M615X
M636R
M637R
M707A
M707KR
M707M
M707Q
M715X
M736KR
M736R
M737R
84
85
15
84
84
84
84
84
15
13
13
13
12
12
12
14
14
14
14
13
13
13
12
14
14
14
14
13
13
13
12
12
12
14
14
14
14
13
13
13
12
12
15
15
14
13
13
13
12
15
15
15
14
M786C
M786KC
M787C
M815X
M836KR
M836R
M886C
M886KC
M937R
M987C
MF3
15
15
14
15
15
15
15
15
14
14
84
N
N001PLUS
N001PRO
N001S
N002P
N002PLUS
N002PRO
N003PLUS
N003PRO
N003X
N004PLUS
N004PRO
N004S
N005P
N005PLUS
N005PRO
N006X
N007S
N008P
N009X
N010PRO
N010S
N011P
N011PRO
N012PRO
N012X
N013PRO
N013S
N014P
N014PRO
N015X
N016S
N017P
N018X
N022PRO
N022PRO2
N023PLUS
N023PLUS2
N023PRO
N023PRO2
N024PLUS
N024PLUS2
N026PRO
79
78
71
71
79
78
79
78
71
79
78
71
71
79
78
71
71
71
71
77
71
71
77
77
71
77
71
71
77
71
71
71
71
76
76
76
76
76
76
76
76
76
N026PRO2
N027PRO
N027PRO2
N028PRO
N029P
N029PRO
N029S
N029X
N030PRO
N030S
N031P
N031PLUS
N031PRO
N031PRO1
N032PLUS
N032PRO
N032PRO1
N033PRO
N033S
N034P
N034PLUS
N034PRO
N035PRO
N036PLUS
N036PRO
N036S
N037P
N037PLUS
N037PRO
N038PRO
N039S
N040P
N040PLUS
N040PRO
N041PLUS
N041PRO
N042PLUS
N042PRO
N042S
N043P
N043PLUS
N043PRO
N045PLUS
N045PRO
N046PRO
N047PRO
N048PRO
N050PRO
N050S
N050S8
N051P
N051P8
N051PRO
N052PRO
76
76
76
76
71
76
71
71
78
72
72
79
79
79
79
79
79
79
72
72
79
79
79
79
79
72
72
79
79
79
72
72
79
78
79
78
79
78
72
72
79
78
79
78
77
77
77
77
73
73
73
73
77
78
N052X
N052X8
N053PRO
N053S
N053S8
N054P
N054P8
N054PRO
N055PRO
N055X
N055X8
N056PRO
N056S
N057P
N058X
N059PRO
N059PRO78
N059S
N060P
N060PRO
N061PRO
N061X
N062PRO
N063PRO
N064PRO
N065PRO
N065PRO58
N065S
N066P
N066PRO
N067PRO
NO68P
N068PRO
N068S
N069PRO
N070PLUS
N070PRO
N070TUCK
N071PLUS
N071PRO
N071TUCK
N072PLUS
N072PRO
N073PLUS
N073TUCK
N080PLUS
N080S
N081P
N081PLUS
N082PLUS
N082X
N083S
N084P
N085X
N086S
73
73
78
73
73
73
73
78
78
73
73
78
73
73
73
81
81
73
73
81
81
73
81
81
81
81
81
73
73
81
81
73
81
73
81
80
80
80
80
80
80
80
80
80
80
80
71
71
80
80
71
71
71
71
71
N087P
N088X
N089S
N090P
N090PRO
N091PRO
N091X
N092PRO
N093PRO
N094PRO
N094X
N095PRO
N096PRO
N097X
N1000PRO
N1000SC
N1001PRO
N1001SS
N1002PS
N1003SC
N1004SS
N1005PRO
N1005PS
N1006SC
N1007SS
N1008PS
N1009SC
N1010SS
N1011PS
N1011SC
N1013SC
N1013SS
N1014PS
N1016PS
N1016SS
N1300GRAN
N1300PRO
N1301GRAN
N1301PRO
N1302GRAN
N1302PRO
N1303GRAN
N1303PRO
N1304GRAN
N1304PRO
N1305GRAN
N1305PRO
N1306GRAN
N1306PRO
N1310KIT
N1401PRO
N1402PRO
N1403PRO
N1404PRO
N1405PRO
71
71
71
71
78
78
71
78
78
78
71
78
78
71
78
64
78
64
64
64
64
77
64
64
64
64
64
64
64
64
64
64
64
64
64
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
81
81
81
81
81
N1406PRO
N1407PRO
N1408PRO
N1409PRO
N1411PRO
N2001P
N2002P
N2003P
N2004P
N2005P
N2006P
N2007P
N2008P
N2009S
N2010P
N2011S
N2012P
N2013S
N2014P
N2015S
N2016P
N2017S
N2018P
N2019S
N2020P
N2021P
N2021S
N2022S
N2023P
N2024S
N2025P
N2026S
N2027P
N2028S
N2029P
N2030S
N2031P
N2032S
N2033P
N2034S
N2035P
N2036S
N2037P
N2038S
N2039P
N2040S
N2041P
N2042S
N2043P
N2044S
N2045P
N2047P
N2049P
N2051P
81
81
81
81
81
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
75
75
75
75
75
75
75
75
75
75
75
N2053P
N2055P
N2057P
N208P
N209X
N220P
N221X
N223P
N224X
N229P
N230X
N235P
N236X
N247P
N248X
N2500P
N2501P
N2502P
N2503P
N2504P
N2505P
N2506P
N2507P
N2508P
N2509P
N2510P
N2511P
N2512P
N2513P
N2514P
N2515P
N2516P
N2517P
N2518P
N2519P
N2520P
N2521P
N2522P
N2523P
N2524P
N2525P
N2526P
N2527P
N2528P
N2529P
N2530P
N2531P
N2532P
N256P
N257X
N271P
N272X
N289P
N290X
75
75
75
66
66
66
66
66
66
66
66
66
66
66
66
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
75
75
75
75
75
75
75
75
75
75
66
66
66
66
66
66
N292P
N293X
N358P
N359X
N370P
N371X
N373P
N374X
N379P
N380X
N385P
N386X
N397P
N398X
N4BLACK
N4WHITE
N4000
N4001
N4002
N4010
N4020
N4030
N406P
N407X
N421P
N422X
N439P
N440X
N442P
N443X
N5000
N5001
N5002
N5003
N5004
N5005
N5006
N5010QR
N5011QR
N5012QR
N5013QR
N5014QR
N5015QR
N501S1
N501S2
N501S7
N502P1
N502P2
N502P7
N503X1
N503X2
N503X7
N504S1
N504S2
66
66
66
66
66
66
66
66
66
66
66
66
66
66
82
82
82
82
82
82
82
82
66
66
66
66
66
66
66
66
75
75
75
75
75
75
75
75
75
75
75
75
75
68
68
68
68
68
68
68
68
68
68
68
N504S7
N505P1
N505P2
N505P7
N506X1
N506X2
N506X7
N507S1
N507S2
N507S7
N508P1
N508P2
N508P7
N509X1
N509X2
N509X7
N510S1
N510S2
N510S7
N511P1
N511P2
N511P7
N512X1
N512X2
N512X7
N523S1
N523S2
N523S7
N524P1
N524P2
N524P7
N525X1
N525X2
N525X7
N529S1
N529S2
N529S7
N530P1
N530P2
N530P7
N531X1
N531X2
N531X7
N540S1
N540S2
N540S7
N541P1
N541P2
N541P7
N542X1
N542X2
N542X7
N543S1
N543S2
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
89
90
N543S7
N544P1
N544P2
N544P7
N545X1
N545X2
N545X7
N546S1
N546S2
N546S7
N547P1
N547P2
N547P7
N548X1
N548X2
N548X7
N549S1
N549S2
N549S7
N550P1
N550P2
N550P7
N551X1
N551X2
N551X7
N560S1
N560S2
N561S1
N561S2
N562S1
N562S2
N563P1
N563P2
N564P1
N564P2
N565P1
N565P2
N566X1
N566X2
N567X1
N567X2
N568PD
N568X1
N568X2
N569PD
N570PD
N570HP
N570PRO
N570PRO2
N571HP
N571PRO
N571PRO2
N580S
N581P
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
68
69
77
77
69
77
77
70
70
N582X
N583S
N584P
N585X
N586S
N587P
N588X
N589S
N590P
N591X
N592S
N593P
N594X
N600S
N601P
N602X
N603S
N604P
N605X
N606S
N607P
N608X
N609S
N610P
N611X
N612S
N613P
N614X
N621P
N622X
N624P
N625X
N627P
N628X
N630P
N631X
N701P
N702X
N704P
N705X
N707P
N708X
N710P
N711X
N713P
N714X
N716P
N717X
N719P
N720X
N722P
N723X
N725P
N726X
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
67
67
67
67
66
66
66
66
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
N728P
N729X
N734P
N735X
N737P
N738X
N740P
N741X
N771P
N772X
N774P
N775X
N777P
N778X
N780P
N781X
N783P
N784X
N786P
N787X
N789P
N790X
N792P
N793X
N795P
N796X
N798P
N799X
N804P
N805X
N807P
N808PRO
N808X
N810P
N811X
N841P
N842X
N844P
N845X
N847P
N848X
N850P
N851X
N853P
N854X
N856P
N857X
N859P
N860X
N862P
N863X
N865P
N866X
N868P
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
78
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
67
N869X
67
N874P
67
N875X
67
N877P
67
N878X
67
N880P
67
N881X
67
N900COM
76
N900COM2
76
N901COM
76
N901COM2
76
N901DSCOM
76
N902DSCOM
76
N902P
67
N903X
67
N911P
67
N912X
67
N914P
67
N915X
67
N917P
67
N918X
67
N920P
67
N921X
67
N923P
67
N924X
67
N926P
67
N927X
67
N929P
67
N930X
67
N935P
67
N936X
67
N938P
67
N939X
67
N944P
67
N945X
67
N947P
67
N948X
67
N950P
67
N951X
67
N980
74
N982
74
NDT10P
73
NDT2P
73
NDT3P
73
NDT4P
73
NDT6P
73
NDT7P
73
NDT8P
73
NT10P
70
NT10S
70
NT12E
69
NT12P1
69 & 70
NT12P2
69
NT12S1
69 & 70
NT12S2
NT14E
NT14P1
NT14P2
NT14S1
NT14S2
NT2P
NT2S
NT4P
NT4S
NT5P
NT5S
NT7P
NT7S
NT8P
NT8S
NZ3010P
NZ3010X
NZ3012P
NZ3012X
NZ3015P
NZ3015X
NZ3017P
NZ3017X
NZ3019P
NZ3019X
69
69
69 & 70
69
69 & 70
69
72
72
72
72
72
72
72
72
72
72
70
70
70
70
70
70
70
70
70
70
P
PB2S
PB2T
PB3S
PB3T
PB4Q
PB4S
PB4T
PB46S
PC2C
PC2M
PC5C
PC5M
PC6C
PC6M
PC7C
PC7M
PD257B
PD455B
PD557B
PD757B
PH69G
PH69M
PH69T
PH69V
PH69W
PM210S
PM210T
83
83
83
83
84
83
83
83
43
43
43
43
43
43
43
43
44
44
44
44
43
43
43
43
43
41
41
PM212S
PM212T
PM236S
PM236T
PM250S
PM250T
PM260S
PM260T
PM280S
PM280T
PM310S
PM310T
PM312S
PM312T
PM336S
PM336T
PM350S
PM350T
PM354B
PM360S
PM360T
PM380S
PM380T
PM410S
PM410T
PM412S
PM412T
PM436S
PM436T
PM450S
PM450T
PM454B
PM460S
PM460T
PM480S
PM480T
PM652B
PM852B
PQ3A
PQ3B
PQ3D
PS2C
PS2F
PS2M
PS3C
PS3F
PS3M
PS4C
PS4F
PS4M
PSB25G
PSB25M
PSB25V
PSB25AS
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
41
44
41
41
41
41
41
41
41
41
41
41
41
41
44
41
41
41
41
44
44
41
41
41
42
42
42
42
42
42
42
42
42
43
43
43
43
PSB04G
PSB04M
PSB04V
PSB204S
PSBEXT
PT2C
PT2F
PT2M
PT3C
PT3F
PT3M
PT4C
PT4F
PT4M
43
43
43
43
43
42
42
42
42
42
42
42
42
42
R
R425A
R425C
R425F
R525A
R525C
R525F
RN235A
RN533A
RO132A
RO133A
RO135A
RO235A
RP113A
RP135A
RP235A
RQ235A
RQ345A
RQ533A
RR425A
RR425C
RR425F
RR525A
RR525C
RR525F
RR525Z
RR625A
RR625C
RR625F
RR625Z
23
23
23
23
23
23
24
24
24
24
24
24
24
24
24
24
24
24
23
23
23
23
23
23
23
23
23
23
23
S
S103Z
S113Z
S123R
S193R
S203Z
S213Z
S223R
S243R
16
16
16
16
16
16
16
16
S293R
S303Z
S304Z
S313SI
S313Z
S314Z
S323R
S333Z
S334Z
S343R
S383Z
S384Z
S393R
S403Z
S413SI
S413Z
S433Z
S443R
S483Z
SA1DC
SA3DC
SA3FMC
SA43DC
SA51DC
SA5DC
SA5FMC
SB1DC
SB3DC
SC1DC
SC3DC
SC3FMC
SC42DC
SC51DC
SC5DC
SC5FMC
SD1DC
SD3DC
SD3FMC
SD42DC
SD51DC
SD5DC
SD5FMC
SE1DC
SE3DC
SE41DC
SE51DC
SE5DC
SF1DC
SF3DC
SF3FMC
SF42DC
SF51DC
SF5DC
SF5FMC
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
62
62
62
63
63
62
62
62
62
62
62
62
63
63
62
62
62
62
62
63
63
62
62
62
62
63
63
62
62
62
62
63
63
62
62
SG1DC
SG3DC
SG44DC
SG51DC
SG5DC
SH1DC
SH2DC
SH5DC
SJ3SC
SK3SC
SKIT1
SKIT2
SKIT3
SKIT4
SKIT5
SKIT6
SKIT7
SKIT8
SKIT9
SL1DC
SL3DC
SL3FMC
SL42DC
SL4DC
SL53DC
SM1DC
SM4DC
SM5DC
SN3DC
SN42DC
SP325010
SP325012
SP325015
SP325018
SP325080
SR105004
SR105006
SR105008
SR105010
SR105012
SR105015
SR105018
SR105024
SR105032
SR155004
SR155006
SR155008
SR155010
SR155012
SR155015
SR155018
SR155024
SR155032
SR205004
62
62
63
63
62
62
62
62
62
62
63
63
63
63
63
63
63
63
63
62
62
62
63
62
63
62
62
62
62
63
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
SR205006
SR205008
SR205010
SR205012
SR205015
SR205018
SR205024
SR205032
39
39
39
39
39
39
39
39
V
V1403260
V1403860
V1404560
V14532A8
V14547A8
V14560A8
25
25
25
25
25
25
W
W013A
W016A
W018A
W073A
W076A
W078A
W112A
W113A
W116A
W118A
W212A
W213A
W216A
W218A
W272A
W273A
W276A
W278A
W312A
W313A
W316A
W318A
W322A
W323A
W326A
W328A
WF212Z
WF212Z9
WF212Z9EZ
WF212Z9H
WF212ZEZ
WF212ZH
WF240Z
WF240Z9
WF240Z9EZ
WF240Z9H
WF240ZEZ
WF240ZH
WF260Z
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
30
30
30
30
30
30
30
30
30
30
30
30
30
WF260Z9
WF260Z9EZ
WF260Z9H
WF260ZEZ
WF260ZH
WF280Z
WF280Z9
WF280Z9EZ
WF280Z9H
WF280ZEZ
WF280ZH
WF412Z
WF440Z
WF460Z
WF480Z
WF512Z
WF512Z9
WF512Z9EZ
WF512Z9H
WF512ZEZ
WF540Z
WF540Z9
WF540Z9EZ
WF540Z9H
WF540ZEZ
WF560Z
WF560Z9
WF560Z9EZ
WF560Z9H
WF560ZEZ
WF580Z
WF580Z9
WF580Z9EZ
WF580Z9H
WF580ZEZ
WF712Z
WF712Z9
WF712Z9H
WF712ZH
WF740Z
WF740Z9
WF740Z9H
WF740ZH
WF760Z
WF760Z9
WF760Z9H
WF760ZH
WF780Z
WF780Z9
WF780Z9H
WF780ZH
WFJ212Z9EZ
WFJ240Z9
WFJ240Z9EZ
WFJ240Z9H
WFJ260Z9
WFJ260Z9EZ
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
31
31
31
31
31
31
WFJ260Z9H
WFJ280Z9
WFJ280Z9EZ
WFJ280Z9H
WFJ512Z9EZ
WFJ540Z9
WFJ540Z9EZ
WFJ540Z9H
WFJ560Z9
WFJ560Z9EZ
WFJ560Z9H
WFJ580Z9
WFJ580Z9EZ
WFJ580Z9H
WFJ740Z9
WFJ740Z9H
WFJ760Z9
WFJ760Z9H
WFJ780Z9
WFJ780Z9H
WP212Z
WP212ZEZ
WP212ZH
WP240Z
WP240ZEZ
WP240ZH
WP260Z
WP260ZEZ
WP260ZH
WP280Z
WP280ZEZ
WP280ZH
WP312ZF
WP340ZF
WP360ZF
WP380ZF
WP512Z
WP512ZEZ
WP512ZH
WP540Z
WP540ZEZ
WP540ZH
WP560Z
WP560ZEZ
WP560ZH
WP580Z
WP580ZEZ
WP580ZH
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
X
X251A
X251KA
X251PVC3
X251T
X252A
X252KA
X252T
21
20
22
20
21
20
20
X252PVC3
X281C
X281F
X281KC
X281KF
X281KR
X281P
X281R
X282C
X282F
X282KC
X282KF
X282KR
X282P
X282R
X440A
X440C
X451A
X451A3
X451KA
X451PVC3
X451T
X452A
X452A3
X452KA
X452PVC3
X452T
X460A
X460C
X460KA
X460KC
X481C
X481C3
X481F
X481F3
X481KC
X481KF
X481KR
X481P
X481PZ
X481R
X481R3
X482C
X482C3
X482F
X482F3
X482KC
X482KF
X482KR
X482P
X482R
X482R3
X490A
X490C
22
21
21
20
20
20
22
21
21
21
20
20
20
22
21
22
22
21
21
20
22
20
21
21
20
22
20
22
22
22
22
21
21
21
21
20
20
20
22
22
21
21
21
21
21
21
20
20
20
22
21
21
22
22
X651A3
X651C3
X651F3
X651P3
X651R3
X652A3
X652C3
X652F3
X652P3
X652R3
X660A
X660C
X681PZ
X860A
X860C
X987C
X987R
21
21
21
22
21
21
21
21
22
21
22
22
22
22
22
21
21
Y
Y314A
Y314S
Y315A
Y315AP
Y315S
Y415A
Y415AP
Y505A
Y515A
Y515AP
Y525A
Y615A
Y615AP
YB167A
YB400AP
YB401AP
YB402AP
YB403AP
YB404AP
YB405AP
YB406AP
YB407AP
YB500AP
YB501AP
YB652A
YB658A
YB658AP
YB662A
YB668A
YB668AP
YB769A
YB869A
YB869AP
YC414A
YC414AP
YC415A
54
54
54
59
54
54
59
54
54
59
54
54
59
55
60
60
60
60
60
60
60
60
61
61
55
55
59
55
55
59
55
55
59
55
59
55
91
92
YC415AP
YE431A
YE431AP
YE431S
YE432A
YE432S
YE434A
YE434S
YE435A
YE435AP
YE435S
YE436A
YE436S
YE635A
YE635S
YF441A
YF441AP
YF441S
YF442A
YF442S
YF444A
YF444S
YF445A
YF445AP
YF445S
YF446A
YF446S
YF545A
YF545AP
YF545S
YF635A
YF635S
YF645A
YF645S
YG311A
YG311AP
YG311S
YG312A
YG312S
YG314A
YG314S
YG315A
YG315AP
YG315S
YG315SP
YG316A
YG316AP
YG316S
YG3515A
YG415A
YG415A2
YG415AP
YG615A
YG615A2
59
52
58
52
52
52
52
52
52
58
52
52
52
52
52
52
58
52
52
52
52
52
52
58
52
52
52
52
52
52
52
52
52
52
53
58
53
53
53
53
53
53
58
53
58
53
58
53
53
53
53
58
53
53
YG615S
YG625A
YG625A2
YH301A
YH301AP
YH302A
YH304A
YH305A
YH305AP
YH306A
YH3505A
YH405A
YH405AP
YH505A
YH605A
YJ34V
YJ37WTS
YJ39CH
YJ39CHS
YJ39SC
YJ46SH
YJ49CH
YJ49CHS
YK001A
YK001AP
YK002A
YK002AP
YK002S
YK003A
YK004A
YK004AP
YK005A
YK005AP
YK006A
YK007A
YK007S
YK008A
YK008AP
YK009A
YK013A
YK020A
YK020S
YK021S
YK202AP
YK203AP
YK204AP
YK301AP
YK302AP
YK303AP
YK304AP
YK305AP
YK306AP
YK307AP
YK308AP
53
53
53
53
58
53
53
53
58
53
53
53
58
53
53
56
56
56
56
56
56
56
56
56
59
56
59
56
56
56
59
56
59
56
56
56
56
59
56
56
56
56
56
59
59
59
60
60
60
60
60
60
60
60
YK309AP
YK310AP
YL451A
YL451AP
YL452A
YL454A
YL455A
YL455AP
YL456A
YM006
YM007
YM008
YM009
YM010
YN100AP
YN101AP
YN102AP
YN103AP
YN104AP
YN105AP
YN106AP
YT214A
YT215A
YT414A
YT414AP
YT415A
YT415AP
YX290A
60
60
53
58
53
53
53
58
53
85
85
85
56
56
60
60
60
60
60
60
60
54
54
54
59
54
59
52
Z
Z210A
Z210C
Z212A
Z212C
Z216A
Z216C
Z216Z
Z224A
Z224C
Z224Z
Z236A
Z236C
Z236Z
Z250A
Z250C
Z250Z
Z260A
Z260C
Z260Z
Z280A
Z280C
Z280Z
Z410A
Z410C
Z412A
28
28
28
28
28
28
29
28
28
29
28
28
29
28
28
29
28
28
29
28
28
29
28
28
28
Z412C
Z416A
Z416C
Z416Z
Z424A
Z424C
Z424Z
Z436A
Z436C
Z436Z
Z450A
Z450C
Z450Z
Z460A
Z460C
Z460Z
Z480A
Z480C
Z480Z
Z510A
Z510C
Z510S
Z512A
Z512C
Z512S
Z516A
Z516C
Z516S
Z516Z
Z524A
Z524C
Z524S
Z524Z
Z536A
Z536C
Z536S
Z536Z
Z550A
Z550C
Z550S
Z550Z
Z560A
Z560C
Z560S
Z560Z
Z580A
Z580C
Z580S
Z580Z
Z710A
Z710C
Z710S
Z712A
Z712C
Z712S
28
28
28
29
28
28
29
28
28
29
28
28
29
28
28
29
28
28
29
28
28
28
28
28
28
28
28
28
29
28
28
28
29
28
28
28
29
28
28
28
29
28
28
28
29
28
28
28
29
28
28
28
28
28
28
Z716A
Z716C
Z716S
Z716Z
Z724A
Z724C
Z724S
Z724Z
Z736A
Z736C
Z736S
Z736Z
Z750A
Z750C
Z750S
Z750Z
Z760A
Z760C
Z760S
Z760Z
Z780A
Z780C
Z780S
Z780Z
Z910A
Z910C
Z916A
Z916C
Z916Z
Z924A
Z924C
Z924Z
Z936A
Z936C
Z936Z
Z950A
Z950C
Z950Z
Z960A
Z960C
Z960Z
Z980A
Z980C
Z980Z
28
28
28
29
28
28
28
29
28
28
28
29
28
28
28
29
28
28
28
29
28
28
28
29
28
28
28
28
29
28
28
29
28
28
29
28
28
29
28
28
29
28
28
29
WARRANTY
ABMAST products are warranted against defects in workmanship and material. We will replace any product proven
defective. There is no other warranty expressed or implied.
SAFETY INFORMATION
This is not intented as a complete guide in the use, care and protection of abrasive wheels. All abrasive products
in this catalogue shall be used in accordance with "safety regulation" set by the directive B7.5-1990 described by the
American National Safety Institute. The operator should read and become thouroughly familiar with the above before
using the product.
Grinding wheels are economical and efficient tools when running at proper speeds. When subjected to unusual
stress, shock or operated at an unsafe speed, grinding wheels are breakable.
• Always handle and store wheels in a careful manner.
• Always visually inspect all wheels before mounting for possible damage in transit.
• Always check maximum operating speed established for wheel against machine speed.
• Always check mounting flanges for equal and correct diameter.
(Should be at least 1/4 diameter of the wheel and relieved around the hole.)
• Always use a machine guard covering at least one half of the grinding wheel.
• Always allow newly mounted wheels to run at operating speed, with guard in place,
for at least one minute before grinding.
• Always wear protective goggles or other protective eyewear when grinding.
GENERAL INFORMATION
Our new catalogue has been designed to make it easier to find the product you require. The catalogue has been
divided by tool type and then by application. The use of pictograms in our catalogue and on our product labels assures
that the product you purchase will fit the right tool and has the proper shape and dimensions.
Please contact ABMAST for the name and telephone number of your local distributor.
QUALITY ABRASIVES FOR PROFESSIONALS
CANADA
USA
Phone: 1-800-361-0854 Fax: 1-800-341-0554
Phone: 1-800-361-2297 Fax: 1-800-300-2420
Saint-Hyacinthe, Quebec, J2S 1H3
E-mail: [email protected] Internet: www.abmast.com
INTERNATIONAL
Phone: 1-450-774-4660 Fax: 1-450-774-0554
Printed in Canada
Queensbury, NY 12804
E-mail: [email protected] Internet: www.abmast.com
PUERTO RICO
Phone: 1-866-361-2297 Fax: 1-866-302-2420

quality abrasives for professionals

Transcription

Similar documents

available in stock - Christopher Designs

High Speed Cut-Off Wheels PDF