torco - Splash`n Dirt

TORCO
MACH TM
BURN CONTROL TECHNOLOGY
TORCO RACING FUELS MACH TM SERIES
21 Grades of Hi-Per formance Race
Fuels for All Motorspor t Applications
Out-performs Available Standard Racing Fuels.
Torco Race Fuels Will Meet All Sanctioning Organizations Fuels.
MACHTM 104
— Mon - 97 Ron - 110
Designed for the Professional Racer on
and off the track. Drag Cars - Sprint
Cars - Bikes - Go-carts - Boats with
compression up to 13:1
7000 RPM. Designed to protect static
compression ratios up to 14:1.
MACHTM 114
— Mon - 113 Ron - 120+
Torco’s All-Around Racing Fuel incorporating Burn-Control Technology.
MACHTM 110
Low flash point fuel stocks com— Mon - 108.5 Ron - 116
bined with state of the art synergistic
Torco’s All-Around Racing Fuel incor- additive package. Designed to proporating Burn-Control Technology. tect static compression ratios up to
Low flash point fuel stocks com- 14:1/8000 RPM Drag Racers, Road
bined with state of the art synergistic Racers, Bracket Racers, Snowmobiles,
additive package. Designed to pro- Motorcycles, Race Boats, & Go-Carts.
tect static compression ratios up to Protect your investment. Protect your
13:1/8000 RPM Drag Racers - Road Standings.
Racers - Bracket Racers - snowmobiles - Motorcycles - Race Boats - Go- MACHTM 116
Carts Protect your investment. Protect — Mon - 115 Ron - 120+
your Standings.
For sophisticated applications set-ups
for Stock Car, Late-Model, Modified
MACHTM 112
Sportsman, Enduro Racing, Bracket
— Mon - 109.5 Ron - 118
Racing with compressions ratios 15:1
Stock Car, Late Model, Modified and 8500 RPM.
Sportsman, Enduro Racing, Drag
Racing. This is superior fuel for most MACHTM 118
2-cycle applications - Motocross, — Mon - 120+ Ron - 120+
Snowmobiles, ATV, Personal Watercraft, Meet and exceeds the expectaOff-Shore Race Boats. Meets the de- tions of Pro Stock Drag Racers runmanding requirements to prevent loss ning maximum cylinder pressure with
of power over time and conditions. 10,000 + RPM-high stress environEngines that regularly run in excess of ment, or any extreme high cylinder
pressure 4-cycle motor. Torco’s Burn
Control Technology coupled with an
Advanced-Science additive package
allows the Professional racer to compete at the cutting edge when every
thousands of a second counts. Torco’s
118 Engine builders and Pro’s choice.
Dynos and Race Tracks have witnessed the controlled-burn and quantum-power released in this MACHTM
Series Designed Fuel. Records will be
set, heads will turn. A new paradigm
of thought went into the Development
Chemistry at the base of this fuel, assuring that peak cylinder pressure is
maintained by the critical timing of
fuel releasing it’s maximum energy
potential.
Alcohol (99.9 Pure methanol). *Torco
Racing Methanal Plus available
with new “TORCO METHANOL
ENHANCER”. New MACHTM 98
unleaded available at pump or
in bulk *New - Custom Blending
Available!!
SPLASH’N DIRT - Catalogue 2005 Catalog - PAGE 555
T O R C O
FOR PROFESSIONAL USE ONLY.
FOR OFF ROAD USE ONLY.
TORCO
MACH TM
BURN CONTROL TECHNOLOGY (Continued)
Specific
Gravity
Pump
Octane
(R+M)/2
Reid
Vapor
Pressure
Distillation
10%
90%
Evap.
Evap.
MACHTM 104 — Mon - 97 Ron - 110
0.731
104
8
150 0F
245 0F
MACHTM 110 — Mon - 108.5 Ron - 116
0.710
110
7
160 0F
211 0F
MACHTM 112 — Mon - 109.5 Ron - 118
0.714
112
7
140 0F
219 0F
MACHTM 114 — Mon - 113 Ron - 120+
0.705
114
7
150 0F
224 0F
MACHTM 116 — Mon - 115 Ron - 120+
0.735
116
7
170 0F
221 0F
MACHTM 118 — Mon - 120+ Ron - 120+
0.710
118
7
168 0F
208 0F
MACHTM 96 UNL — Mon - 93.4 Ron - 99
Made With Our Famous Machtm Series Accelerator Racing Fuel Concentrate
0.755
96
8
152 0F
269 0F
MACHTM 100 UNL RFG3 — Mon - 100 Ron - 101
0.750
100
8
133 0F
205 0F
MACHTM 108 UNL RFG3 — Mon - 104 Ron - 112
0.745
108
7.2
159 0F
225 0F
MACHTM 110 PLUS — Mon - 113.6 Ron - 118
0.704
115.3
7
140 0F
195 0F
MACHTM 116 NOS NITROUS FUEL — Mon - 115 Ron - 120+
0.735
116
6
169 0F
216 0F
MACHTM 118 NOS NITROUS FUEL Mon - 120+ Ron - 120+
0.725
118
6
171 0F
210 0F
MACHTM 120M — Mon - 120+ Ron - 120+
0.703
120+
6
169 0F
205 0F
Leaded
Race
Fuel
Color
Dielectric
End
Point
N/A
N/A
N/A
N
Purple
N/A
246
Y
Blue
N/A
249
Y
Lt. Violet
N/A
247
Y
Green
N/A
244
Y
Orange
N/A
236
Y
Green
+0.8
320
N
Red
N/A
N/A
N
Clear
N/A
N/A
N
Red
N/A
227
N
Red
-0.1
N/A
Y
Peach
-0.4
N/A
Y
Light Red
N/A
N/A
Y
STEALTH PRO TM SERIES
2 & 4 CYCLE HIGH PERFORMANCE RACE FUELS.
CONTAINS OXYGEN.
Stealth PROTM Series are designed for 2 and 4 cycle applications. Stealth PROTM Series is
used by Professional Motor Cross and Enduro Race Teams. Stealth PROTM Race Fuels meets
AMA Fuel Specifications for any off road 2 and 4 cycle cycle engines. STEALTH PROTM 04, 10, 12,
14, 16, and 18 are now available in 5 US gallons and 55 US gallon drums.
Specific
Gravity
Pump
Octane
(R+M)/2
Reid
Vapor
Pressure
Distillation
10%
90%
Evap.
Evap.
Color
Dielectric
End
Point
Leaded
Race
Fuel
STEALTH PROTM 04 — Mon - 99 Ron - 112
Designed for stock & mild modification, small and big bore motor cross and enduro dependent on R.P.M. and racing applications in excess of 10,000 R.P.M.
0.740
104
8
156 0F
278 0F
Light Blue/Green
N/A
244
Y
STEALTH PROTM 10 — Mon - 109 Ron - 115.5
Designed for 80% of Motor Cross And Enduro Racing. Most widely used for 2 and 4 cycle applications. Better Throttle Response, Midrange Torque, and Top End
0.724
110
8
140 0F
248 0F
Purple
N/A
N/A
Y
STEALTH PROTM 12 — Mon - 110 Ron - 117
Designed the same as STEALTH PROTM 10 but with Extra Octane Protection with Less End Point.
0.718
112
8
128 0F
240 0F
Blue
N/A
N/A
Y
STEALTH PROTM 14 — Mon - 112.5 Ron - 119
Better Throttle Response, Midrange Torque, and Top End. Same as STEALTH PROTM 10 except for Compression in Excess of 14,000+ R.P.M.’s.
0.724
115
8
147 0F
242 0F
Light Violet
N/A
N/A
Y
STEALTH PROTM 16 — Mon - 115 Ron - 120+
For sophisticated applications set-ups for Stock Car, Late-Model, Modified Sportsman, Enduro Racing, Bracket Racing with compressions ratios 15:1 and 8500 RPM.
0.737
116
7
170 0F
221 0F
Green
N/A
244
N
STEALTH PROTM 18 — Mon - 120+ Ron - 120+
0
0
0.712
118
7
168 F
208 F
Orange
N/A
236
N
WARNING LEADED RACING FUELS ARE FOR OFF ROAD ONLY
SPLASH’N DIRT - Catalogue 2005 Catalog - PAGE 556
TORCO
TNT TM
• Blends with all alcohol and nitro fuels.
• Increases seal life.
• Increases horsepower, torque, and throttle in most
applications.
• Burns clean, leaves no sludge, varnish, tar, or gum
build-up.
• High viscosity index gives a wider operating temperature range.
• Lubricity, features lower coefficient
of friction which reduces maintenance and ensures engine life and
performance.
• Greatly improves film strength.
• Eliminates fuel wash down.
• Decreases cylinder bore wear.
• Better oxidation control.
• Outstanding corrosion inhibitor.
CONCENTRATE METHANOL RACE TNT TM FUEL
FUEL ENHANCER
FRAGRANCE
New & Improved — Highly Concentrated
This state of the art fuel additive enhances and controls the
RADICAL burn of methanol providing a significant increase
in horse power and torque. A upper cylinder lubricity additive package is built into Torco’s Methanol Enhancer providing lubrication to the upper cylinders.
For Alcohol &
Gas
Makes your fuel smell
sweet
• Specially formulated
for use with all alcohol
Performance Features:
fuels.
• Increases power & engine torque (in most applica- • Eliminates harsh alcohol
tions).
odors.
• Cleans fuel system and prevents corrosion.
• Unique fragrance • Increased throttle response.
smells great!
• Lowers engine operating temperature.
• Cleans combustion system, better throttle response.
“A Crew Chief & Drivers Best Friend If
• For professional & off-road use only!
Methanol Makes You Nauseous.”
It You Use Racing Methanol. Torco’s Methanol Enhancer Is A Must For You!
SILICONE BRAKE FLUID (DOT 5) HIGH TEMPERATURE
Cartel Silicone Brake Fluids Advantages prove it to RACING BRAKE FLUID
be the most important new product since (DOT 3)
the introduction of the hydraulic brake fluid itself.
*
*
*
*
* NON HYGROSCOPIC — does not
absorb water — thus eliminating
corrosion and deterioration.
* Dry boiling point exceeds 6000F.
* Compatible with DOT 3, DOT 4, and
foreign brake fluids.
* Compatible with natural and synthetic
rubber components.
* Never needs replacement.
Doesn’t harm painted surfaces.
Lubricates all moving parts.
Simple changeover - just perform normal “brake
bleeding job”.
Packaged in 8 oz, quarts (32 oz), gallons, five gallon,
and 55 gallon drums.
A new standard in “ state of the art”
glycol racing brake fluid.
With a dry boiling point of 570oF this
fluid achieves a new high in DOT 3 and
DOT 4 brake fluids. Newly developed
additive components, special antioxidant, and high temperature lubricants help this fluid
live under extreme conditions found in professional competition.
Cartel Racing Brake Fluid is a significant improvement over any similar product available to the professional racer anywhere in the world.
SPLASH’N DIRT - Catalogue 2005 Catalog - PAGE 557
T O R C O
RACING METHANOL UPPER LUBE CONCENTRATE FOR ALCOHOL AND NITRO FUEL
If You Want More Horse Power And Torque Add Our 6 Ounce Methanol Enhancer With TNT Upper Lube.....
hang On It’s Dynamite. Available In Clear Or Red.
TORCO
“ACCELERATOR TM ”
RACE FUEL CONCENTRATE — LEADED OR UNLEADED
NOW AVAILABLE IN SUPER CONCENTRATED 5 US GAL. & 55 US GALS. SIZES!!!
MACHTM RACING FUELS has just announced the release of their MACHTM ACCELERATOR
RACE FUEL CONCENTRATE! Available in UNLEADED and LEADED formulas. This
product is not an octane boost, it is a race fuel concentrate that transforms a 93
octane super no-lead up to a 106 octane race fuel when proper mixing instructions are followed!
This is all due to MACHTM RACING FUELS utilizing their state of the art synergistic additive package, and their burn control technology used in their highly
successful racing fuel blends and incorporating that into a concentrated additive! This concentrate was designed for the performance minded enthusiast who
needs that extra punch and wants to get the optimum performance out of their
current fuel without searching for the availability of a racing fuel!
There are many different variations of blending the concentrate to suit the
customers needs:
1. Blend the Leaded concentrate with 100 low lead aviation fuel to get up to 112
octane race fuel that really flies!!!!!
2. This concentrate when blended with a race fuel makes an NOS fuel to fit many
applications.
3. The Unleaded concentrate when blended with a 93 octane super unleaded
makes up to a 104 octane race fuel for many of today’s street cars, motorcycles,
watercraft, ATV’s and many other motorsport applications!
4. The leaded concentrate makes up to a 106 octane race fuel when blended
properly. Plus giving the needed lubricity of LEAD!!!!!
Of course proper blending directions must be followed to achieve maximum performance results.
This product contains no alcohol and will pass all sanctioned body’s fuel requirements when blended properly!
SPLASH’N DIRT - Catalogue 2005 Catalog - PAGE 558
TORCO
SERVICE PRODUCTS
Power Slide® is an MPZ®
formulated lubricant with
extreme wear and rust protection chemistry. Quickly
penetrates deep into bushings, pins, bearings and rollers then sets to a stable
grease that will not fling off
or melt under high temperature conditions. Designed to
meet demands of high performance and racing applications. For standard and
o-ring chains.
PL-50 PENETRATING LUBRICANT
Sizes: 19 Fl oz
PL-50 is a multi-use penetrating fluid that
displaces moisture and provides superior
light film lubrication. Formulated with proprietary anti-wear and anticorrosion, PL-50
penetrates quickly, relieves seized or rusted parts and extends life of treated components. PL-50 is highly recommended for
cables, levers, chain rollers, pins, bushings
and bare metal surfaces. Also works as an
excellent fogging fluid for powersport or
power equipment (2-stroke & 4-stroke) applications. Will not harm plastic or painted surfaces.
BRAKE & CONTACT CLEANER
Sizes: 18.1 Fl oz
Brake & Contact Cleaner is a quick drying
solvent that effectively removes all traces of
dirt, dust, brake fluids, oils and greases from
many mechanical surfaces. Effectively eliminates these elements from brake parts, electrical components and metal surfaces without
leaving a residue.
Recommended for use on brake calipers, rotors, ignitions, spark plugs and any other related mechanical components.
MOTO-PREP SILICON DETAILING
SPRAY
Sizes: 19.0 Fl oz
Moto-Prep is a multi-purpose cleaner, polish and light lubricant that revives dull faded
surfaces to a dry shiny finish. Formulated for
use on plastic, painted, fiberglass and metal
surfaces providing a long lasting shine. Moto
Prep is intended for many powersport applications and is excellent for displacing moisture and protecting against corrosion. Highly
recommended for the underside of fenders,
frame and engine to reduce dirt build-up
and to help make clean-up easier.
FFO FOAM FILTER OIL
Sizes: Liter
WATERPROOF GREASE
Sizes: 16 oz
Waterproof Grease is a lithium complex grease formulated to offer superior lubricating qualities in a wide range
of powersport applications.
Excellent waterproofing, shock load
protection, extreme temperature
stability and anti-rust protection.
Waterproof Grease is buttery smooth and easy to apply.
Designed for use in all bearing types, linkages and seals
found on motorcycle, ATV, PWC, marine, snowmobile and
power equipment applications.
FFO is formulated with synthetic base oils
and special tackifier additives preventing moisture and abrasive elements
from passing through foam filter elements and entering the engine. FFO
is easy to apply and will not dry out,
drip or run. FFO improves air flow and
will not gum up or clog foam passages. For use on all foam filter elements
found on motorcycle, scooter, ATV
and many other two stroke and four
stroke applications.
SPLASH’N DIRT - Catalogue 2005 Catalog - PAGE 559
T O R C O
POWER SLIDE® CHAIN LUBE
With MPZ®
Sizes: 8 Fl oz, 20 Fl oz
TORCO
ASSEMBLY PRODUCTS
MPZ ENGINE ASSEMBLY LUBE
Sizes: 0.5 oz, 1 oz, 4 oz, 12 oz
MPZ CAM LUBE
Sizes: 1 oz , 5 oz
MPZ SPRAY LUBE
Sizes: 10.8 Fl oz
MPZ Cam Lube is favored by
MPZ Engine Assembly Lube is favored
professional mechanics for
by professional mechanics
assembling valvetrain comfor assembling many interponents. MPZ Cam Lube is a
nal mechanical components
gelled version of MPZ Engine
including wrist pins, pistons,
Assembly Lube featuring highbushings, plain bearings, ball
er load carrying ability and exbearings, roller bearings, jourtended lube film protection.
nals and transmission
components. MPZ is a
Provides severe antihigh viscosity, oil solwear, anti-friction and
uble lubricant which
anti-scuff protection
contains a concentrate
on cam lobes, lifters and othof anti-wear, anti-friction and anti-shock
chemistries featuring the highest degree er highly stressed valvetrain components.
of protection. Excellent adhesion prop- MPZ Cam Lube is completely oil soluble.
erties and will not run or drip from treated parts.
MPZ Spray Lube is a complete engine and mechanical component assembly
lubricant in an easy application aerosol. Derived
from the success of our
MPZ Engine Assembly
Lube, MPZ Spray Lube is
a concentrate of anti-wear,
anti-friction and anti-shock
chemistries featuring the
highest degree of protection. Recommended for the assembly of
engine components, transmissions, transfer cases, differentials, chaincases and
sprocket drives. MPZ Spray Lube is completely oil soluble.
4-STROKE MOTOR OILS
T-4 FOUR STROKE MOTOR OIL
PETROLEUM BLEND
SAE Grades: 10W40 / 20W50
Sizes: Liter, 55 US Gal
T-4 is a highly refined petroleum blend
lubricant designed specifically for motorcycle engines. Utilizes an exclusive
blend of additives and polymer systems that resist high shock loads, high temperatures, shearing and eliminates deposits. T-4 is formulated to remain stable
under peak operating temperatures and provide excellent protection for integrated transmissions. T-4 is a non-friction modified formula.
T-4R FOUR STROKE MOTOR OIL
SYNTHETIC BLEND
SAE Grades: 10W40 / 20W50
Sizes: Liter, 55 US Gal
T-4R is a blend of specially selected
synthetic and petroleum base oils designed for high output motorcycle engines. Provides smooth, positive clutch
engagement, maximum engine protection and extreme pressure
protection for integrated transmissions. T-4R features higher shear
stability and Torco’s race proven MPZ® technology providing the
highest degree of anti-friction and anti-wear.
SPLASH’N DIRT - Catalogue 2005 Catalog - PAGE 560
T-4M FOUR STROKE MOTOR OIL
PETROLEUM BLEND WITH
MPZ®
SAE Grades: 10W40 / 20W50
Sizes: Liter, 55 US Gal
T-4M is a highly refined petroleum blend
lubricant which incorporates Torco’s exclusive MPZ® chemistry for increased
anti-wear and anti-friction performance. Resists high shock loads,
high temperatures, shearing and eliminates deposits. T-4M is formulated to provide smooth positive clutch engagement, superior component life and extreme pressure protection for integrated
transmissions.
T- 4 S R F O U R S T R O K E R A C I N G
OIL
100% SYNTHETIC
SAE Grades: 10W40 / 20W50
Sizes: Liter, 55 US Gal
T-4SR is a 100% synthetic oil designed
for highly stressed four stroke racing engines. Formulated with MPZ®, T-4SR
minimizes frictional losses for increased power and provides
the highest degree of protection under the most severe racing
conditions.
T-4SR offers the ultimate in viscosity control, shear stability, antifriction, anti-wear and smooth, positive clutch activation.
TORCO
2-STROKE OILS
T-2i is a combination of smokeless synthetic and highly refined low carbon petroleum
base oils that offer “ultra-clean” performance and protection. A proprietary additive system virtually eliminates deposits under a full range of
RPM and temperature conditions. T-2i’s clean combustion
properties offer better throttle response, improved acceleration and increased power efficiency. Exceeds JASOFC and ISO-L-EGD specifications.
PSF TWO STROKE OIL
100% SYNTHETIC
Sizes: Liter, 5 US Gal, 55 US Gal
PSF is a 100% synthetic oil designed to
perform over a wide range of two stroke
applications. Offers smokeless technology, improved power efficiency, anti-wear,
anti-corrosion and ultra-clean performance.
PSF is formulated to eliminate spark plug fouling, pre-ignition, ring sticking and combustion chamber deposits. PSF
is a popular choice in moped, scooter, ATV, power equipment and motorcycle applications throughout the world.
Exceeds JASO-FC and ISO-L-EGD specifications.
2-STROKE AND 4-STROKE RACING OILS
GP-7 TWO
STROKE RACING OIL
100% SYNTHETIC
Sizes: 500mL, Liter, Gallon, 5 US
Gal, 55 US Gal
GP-7 is a 100% synthetic oil specifically designed for high output two
stroke racing engines. GP-7 utilizes
Torco’s advanced smokeless technology to increase power
efficiency, improve throttle response and provide “ultra-clean”
performance. A combination of synthetic fortifiers and additive systems provide protection under extreme temperatures,
high rpm and load conditions. GP-7 is blended for maximum
performance and will prevent plug fouling, pre-ignition, ring
sticking and power valve deposits. Premix only.
T-4MXR FOUR STROKE
RACING OIL
SYNTHETIC BLEND
SAE Grade: 15W40
Sizes: Liter, 55 US Gal
T-4MXR is a blend of specially selected
synthetic and petroleum base oils for off
road four stroke racing engines. Provides
the highest degree of protection under extreme temperatures, severe shock loads and peak RPMs. T-4MXR improves ring seal, protects valve train, eliminates deposits,
controls foam, resists high shock loads and provides
smooth, positive clutch activation.
TRANSMISSION AND GEAR OILS
MGO MOTORCYCLE GEAR OIL
SYNTHETIC BLEND
SAE Grade: 80W90
Sizes: Liter, 5 US Gal, 55 US Gal
MGO is made with a select combination of
synthetic and petroleum base oils that have
high shear resistance and extreme pressure
protection. MGO is fortified with shear stable polymers, rust inhibitors, foam suppressants, anti-wear, extreme pressure additives
and pour point depressants. This careful
balance of additives provides all gear and final drive applications the highest degree of performance and protection
over a wide temperature range. Exceed API GL 5
MTF MOTORCYCLE TRANSMISSION FLUID
SYNTHETIC BLEND
SAE Grades: L75W/R-80W/E85W
Sizes: Liter, 5 US
Gal, 55 US Gal
MTF is a series of
light viscosity gear
fluids specifically formulated for 2 stroke and 4 stroke wet clutch transmissions. It
is a balanced blend of the most advanced synthetic and high
VI petroleum base stocks offering superior film strength, high
shear stability, antiwear, anti-foam, anti-oxidation and shock
load protection. MTF improves shifting,
clutch engagement and clutch life. Exceeds
API GL-4
SPLASH’N DIRT - Catalogue 2005 Catalog - PAGE 561
T O R C O
T-2I TWO STROKE
INJECTION OIL
SYNTHETIC BLEND
Sizes: Liter, 5 US Gal, 55 US Gal
TORCO
SUSPENSION FLUIDS
RFF RACING
FORK FLUID
SYNTHETIC
BLEND
Grades: 5 / 7 / 10 /
15 / 20
Sizes: Liter, 5 US
Gal, 55 US Gal
RFF is a series of high V.I. synthetic blend fluids designed to
exceed the demands of all cartridge and damper rod applications. Maintains viscosity providing consistent damping under
the most severe temperature conditions. A proprietary additive
system features the best anti-stiction, antifriction and anti-wear
technology. RFF is treated with special antifoam, seal conditioners, anti-oxidation and corrosion inhibitors for long term durability and component life.
RSF RACING SHOCK FLUID
100% SYNTHETIC
Grades: Light / Medium
Sizes: Liter, 5 US Gal, 55 US Gal
RSF is a series of light viscosity fluids
engineered to exceed the most demanding conditions of modern suspension systems. Formulated using
the most advanced 100% synthetic base fluids to provide consistent performance during long duration and severe temperature conditions. RSF employs Torco’s proprietary additive
system to maintain high VI and eliminate stiction, friction and
wear. Features the best protection against foaming, seal swell,
oxidation and corrosion.
V-SERIES PRODUCTS
V-SERIES “ST” MOTOR OIL
FORMULATED WITH MPZ®
SAE Grades: 20w50, 50, 60
Sizes: Liter, 55 US Gal, (20w50 only)
V-SERIES TRANS LUBE
SYNTHETIC BLEND
SAE Grade: 75w90
Sizes: Liter, 5 US Gal
V-SERIES PRIMARY
CHAINCASE LUBRICANT
Synthetic Blend
Sizes: Liter, 5 US Gal
V-Series Motor
Oils are formulated using highly
refined petroleum
base stocks and
Torco’s race proven MPZ® additive
providing better
cooling, cleaning, ring seal, deposit control and antiwear protection. Maintains viscosity and
provides thermal stability under high temperature environments. V-Series is specifically formulated for Harley® and custom
v-twin engines.
V-Series Trans Lube is a selective blend of synthetic
and petroleum based oils
designed to protect all gear
face surfaces and bearing components found in
Harley® and aftermarket
transmissions. Torco’s race
proven extreme pressure
and anti-friction chemistry promotes the
highest degree of protection for extended
transmission life. Provides smooth shifting
and prevents the formation of rust and oxidation. For use in all 4 and 5 speed FL,
FLT, FX and FXR transmissions.
V-Series Primary Chaincase
is a selective blend of synthetic and petroleum based
fluids designed to protect all critical drive components found in Harley®
and aftermarket chaincases. Provides the highest degree of protection
and smooth positive clutch operation.
Recommended for use in FL, FLT, FX and
FXR chaincase applications. Also recommended for the combined primary / transmission of Sportster® Series XL and XR
applications.
SPLASH’N DIRT - Catalogue 2005 Catalog - PAGE 562
TORCO
SPO SNOWMOBILE TWO
STROKE OIL
SYNTHETIC BLEND
Sizes: Liter, Gallon, 5 US Gal, 55 US Gal
SSO SNOWMOBILE TWO
STROKE OIL
100% SYNTHETIC
Sizes: Liter, Gallon, 5 US Gal, 55 US Gal
S C C
S N O W M O B I L E
CHAINCASE OIL
100% SYNTHETIC
Sizes: 500ml
SPO is a superior blend
of synthetic
and highly refined petroleum base oils
specifically engineered
for the severe
demands of snowmobile 2 stroke engines. SPO is formulated for power efficiency, improved throttle response,
reduced emissions and maximum
component durability. Offers “Super
Cold Flow” technology and carbonfree performance on piston crowns,
cylinder heads, exhaust ports, power valves and spark plugs. Exceeds
JASO-FC and ISO-L-EGD specifications. For injection or premix applications.
SSO is a
100% synthetic based
oil formulated to reduce
smoke emissions and
provide uncompromised
performance under the most severe conditions. “SSO” technology protects piston crowns, cylinder heads, spark plugs,
power valves and exhaust ports from
harmful carbon deposits. SSO maintains higher compression and improves
power output and throttle response. This
super cold flow formula Also provides
the highest degree of anti-friction and
anti-wear while protecting against rust
and oxidation. Exceeds JASO-FC and
ISO-L-EGD specifications. For injection
or premix applications.
SCC is a 100% synthetic
fluid designed to exceed
the extreme pressure
and low temperature demands of snowmobile
chaincase applications.
Formulated with Torco’s
exclusive MPZ® chemistry to reduce friction, reduce wear, improve power efficiency
and extend the life of highly stressed
drive components. SCC also contains
anti-rust, anti-corrosion and antifoam
chemistries. Exceeds API GL-4.
WATERCRAFT AND MARINE PRODUCTS
PWC WATERCRAFT TWO
STROKE OIL
SYNTHETIC BLEND
Sizes: Liter, Gallon, 5 US Gal, 55
US Gal
PWC is a superior blend of smokeless synthetic base oils, petroleum
base oils and low ash additives
designed for high output personal watercraft engines.
Offers lower emissions, superior engine protection and
improved throttle response. A proprietary additive system
provides superior anti-friction and anti-wear technology
while protecting against rust and oxidation. PWC is formulated to protect pistons, rings, cylinder heads, spark plugs
and power valves from harmful deposits. For Injection or
Premix applications.
TCW3 OUTBOARD TWO CYCLE
OIL
SYNTHETIC BLEND
Sizes: Gallon, 5 US Gal, 55 US Gal
TCW3 is an NMMA certified oil formulated
to improve power efficiency, reduce emissions and minimize engine deposits. A select combination of synthetic base oils,
petroleum base oils and ashless additives provide superior engine protection, low temperature detergency and super clean performance for outboard two stroke engines.
TC-W3 reduces emissions and visible exhaust smoke in
comparison to other TC-W3 certified oils. For injection or
premix applications.
SPLASH’N DIRT - Catalogue 2005 Catalog - PAGE 563
T O R C O
SNOWMOBILE PRODUCTS
TORCO
TORCO PROMOTIONAL PRODUCTS
Torco “Fli-Tri” T-Shirt
Sizes
Small
Medium
Large
X-Large
XX-Large
Colors
Grey, White
Grey, White
Grey, White
Grey, White
Grey, White
Torco Display Tent 10x10
Torco Flex-Fit® Hat
Sizes
S-M
L-XL
Torco Racing Oil Decals
Description
5 inch
10 inch
15 inch
actual size
5” x 1 3⁄16”
10” x 2 5⁄16”
15” x 3 1⁄2”
25 inch
25” x 5 7⁄8”
Torco Dealer Product Rack
Size: 61” t x 26” w x 24” d
Torco Racing Thermal Die-Cut Decals
(Outside black rule to indicate white border edge only, does not appear
on decal)
Description
5 inch
8 inch
actual size
5 3⁄16” x 7⁄8”
8” x 1 3⁄8”
Torco Banners
Description
4 foot
10 foot
SPLASH’N DIRT - Catalogue 2005 Catalog - PAGE 564
(actual size)
(48” x 16”)
(118” x 40”)
Color (as shown)
Black
Black