IbTIECar2012 Winners`Booklet
Transcription
IbTIECar2012 Winners`Booklet
0|Page CEO Message Our vision is to create a pioneering centre in the region for enabling innovation, entrepreneurship, and intellectual property in ICT Small and Medium Enterprises and start-ups to thrive, expand and succeed. Since being inaugurated in 2010, Technology Innovation and Entrepreneurship Center (TIEC) boosts innovation in ICT companies so as to contribute significantly to the national economy and compete in the global marketplace. TIEC launched a cluster of initiatives to recognize and establish the foundation of innovation and entrepreneurship, and empower business. Initiatives are identified by close collaboration with diverse stakeholders from NGOs, MNCs, donors, investors, universities, startups, etc. TIEC understands the power and value of tapping into the full spectrum of ideas and abilities that people possess that leads to true insights and innovative practices. The center invests money, technology and resources to support the growth of up-and-coming innovators, entrepreneurs as well as start-ups. In this sequence, TIEC promotes innovation culture among university graduates by organizing competitions that inject innovative ideas and talents into the ICT industry besides encouraging young people develop novel solutions compatible with current technologies and industries. Ibtiecar 2012 competition embodies the role of TIEC in bolstering and marketing university graduates’ innovative ideas to companies. Companies may incubate, develop and drive such ideas to higher maturity levels. Technology categories of Ibtiecar included software engineering, broadband, mobile applications, cloud computing, social networking, embedded systems, etc. TIEC embarks on a mission to position Egypt as a leading regional hub and world-class destination for ICT-based Innovation and Entrepreneurship. Eng. Yasser Elkady TIEC's Chief Executive Officer 1|Page Acknowledgment I hereby would like to express my deepest gratitude for all Ibtiecar 2012 Team for their valuable support, effort, and constructive suggestions during the journey of the competition. Immense gratitude must be extended to TIEC’s CEO for the support and encouragement throughout the competition from the very first step on the road. Special thanks go to Eng. Sally Metwally, for her support, constant efforts throughout different phases of the competition, and for giving generously of her time in the accomplishment of this endeavor. I would like to extend a sincere vote of thanks to our sponsors. Their generosity and support was key to the success of the competition. My great appreciation to all members of the “judging committee”, for the willingness to give time so generously, enthusiasm, and valuable feedback to the student. Sincere appreciation to the students and their academic supervisors for the diligent effort and innovative outcomes. Your novel ideas are really valuable and vital for the sector growth. Please keep the good work up. Finally yet importantly, we would like to thank ITIDA management and working team for their efforts in hosting the final ceremony and for providing full support regarding this. Thank you everyone who takes part of this competition. Without your support, and comments, this effort would not have been realized or enhanced. Dr. Dalia Gamal Competition and Academia Innovation Support Unit Manager 2|Page Contents About ......................................................................................................................................... 5 Competitions time line ................................................................................................................ 5 Competition Tracks ..................................................................................................................... 6 Ibtiecar 2012 Sponsors: ............................................................................................................... 6 Important Graphs and Statistics: ................................................................................................. 7 1. Kinect .................................................................................................................................. 9 1.1 Kinstruct, Simultaneous Localization And Mapping of Indoor Environments Using Kinect ............................................................................................................................................ 9 1.2 Efhamny ﺇﻓﻬﻣﻧﻲ............................................................................................................................ 10 4T 4T 4T 4 T 1.3 Wheelect, Kinect for Wheelchair Users...................................................................................... 11 4T 4T 4T 4T 1.4 Robotic Arm Copying Human Arm Motion Using Kinect ............................................................ 12 4T 2 4T 4T 4T Embedded systems ............................................................................................................ 13 4T 4T 4T 4T 2.1 Smart Traffic Using Zigbee Wireless Network ............................................................................ 13 4T 4T 4T 4T 2.2 Car Black Box System .................................................................................................................. 14 4T 4T 4T 4T 2.3 Smart Blind Stick ......................................................................................................................... 15 4T 3 4T 4T 4T Social Networking .............................................................................................................. 16 4T 4T 4T 4T 3.1 Sentiment Analyzer and Summarizer for Arabic News and Users Comments ........................... 16 4T 4 4T 4T 4T Cloud Computing................................................................................................................ 17 4T 4T 4T 4T 4.1 Q and A ....................................................................................................................................... 17 4T 4T 4T 4T 4.2 Innovative Solutions for Universities research ........................................................................... 18 4T 5 4T 4T 4T BROADBAND ...................................................................................................................... 19 4T 4T 4T 4T 5.1 Smart Communication System using universal software radio peripheral ................................ 19 4T 4T 4T 4T 5.2 Intelligent Optimization Tool "IOT" ............................................................................................ 20 4T 4T 4T 4T 5.3 Open BTS for rural communications: Network design & system analysis ................................. 21 4T 6 4T 4T 4T 4T SMART Building.................................................................................................................. 22 4T 4T 4T 6.1 Power Generation Using Renewable Resources (Solar energy & Biomass energy) ................... 22 4T 4T 4T 4T 6.2 Photovoltaic Smart Micro-Grid compatible with Grid-Tied Distributed Generation and Standalone Applications. ..................................................................................................... 23 4T 4T 4T 4T 3|Page 7 Mobile Applications ........................................................................................................... 24 7.1 E-phone "Educational Phone" .................................................................................................... 24 7.2 Asfaroat – ﻋﺻﻔﺭﻭﺕ..................................................................................................................... 25 4T 4T 4T 4 T 7.3 3la El Tare2 ................................................................................................................................. 26 4T 8 4T 4T 4T VLSI.................................................................................................................................... 27 4T 4T 4T 4T 8.1 Design of Digitally Controlled Timer Based Linear Battery Charger for Power Management Units ..................................................................................................................... 27 4T 4T 4T 4T 8.2 A Multi-Standard Receiver Based on Application Specific Instruction Set Processor (ASIP) .......................................................................................................................................... 28 4T 4T 4T 4T 9 4T EDA/CAD............................................................................................................................ 29 4T 4T 4T 9.1 TRIO - Triple Patterning Decomposer ......................................................................................... 29 4T 4T 4T 4T 9.2 Web-Based Analog Design Using Tradeoff Charts...................................................................... 30 4T 4T 4T 4T 9.3 Layout Stress and Proximity Aware Analog Design Methodology ............................................. 31 4T 4T 4T 4T 10 SOFTWARE Engineering ...................................................................................................... 32 4T 4T 4T 4T 10.1 Distributed programming language and model ......................................................................... 32 4T 4T 4T 4T IBTIECAR 2012 Judges ............................................................................................................... 33 IBTIECAR 2012 Booklet Editors .................................................................................................. 35 IBTIECAR 2012 Working Team ................................................................................................... 35 4T 4T 4T 4T 4T 4T 4|Page About a s apart of student recognition program is launched by the Technology Innovation and Entrepreneurship Center (TIEC). TIEC aims to drive innovation and entrepreneurship in information and communications technology sector (ICT) for the benefit of national economy. Consistent with TIEC’s mission to be a regional hub for innovation, and entrepreneurship. “TIEC Graduation Projects Competition – “ was launched, for the first time in june 2012, in cooperation with Multinationals and MCIT affiliated organizations, for university students in the graduation year, recognizing the best graduation project in this year. The competition main purpose was to Discover the innovative young talents, and ideas, link them to the industry, Encourage people to develop new solutions that are aligned with the trend technologies, Recognize innovation efforts, and hence fostering innovation culture in the coming generations, and Supporting innovative ideas commercialization. This Booklet includes the 24 top ideas out of 179 that have been participated in the competitions first phase. Competitions time line The competition phases is represented in the timeline below: 5|Page Competition Tracks Ibtiecar 2012 has 10 tracks for the applied projects, which are : Hardware Tracks Software Development Tracks • VLSI • Broadband • Social Networking • EDA/CAD • Mobile Applications • kinect • Software Engineering • Embedded Systems • cloud computing • Smart buildings Ibtiecar 2012 Sponsors: The top projects in each track are awarded and recognized by: 6|Page Important Graphs and Statistics: 47 Hardware Projects Software Development projects 132 Total number submitted ideas :179 45 40 35 30 25 20 15 10 5 0 Participant ideas (179 Idea) Full submitted projects (109 Full project) Total number of submitted Ideas/ Full Projects per Track 7|Page 20 18 16 14 12 10 8 6 4 2 0 The number of full submitted projects per University 7 6 5 4 3 2 1 0 The number of projects that hunted the top ranks per University 8|Page Sponsored by 1. Kinect 1.1 Kinstruct, Simultaneous Localization And Mapping of Indoor Environments Using Kinect Project Contacts: Field/ Area: Kinect Sponsor: Microsoft Project Idea: KinStruct is a Simultaneous Localization and Mapping (SLAM) System for indoor environments that uses Kinect as the scanning device. It proves that efficient Real Time SLAM systems can be built using the new RGB-D cameras such as Kinect. The system is also cheap to build and easy to use. Supervisors: • Dr. Mohamed E. Ahmed Novelty : Team Members: 1. Ahmed Mohammed Saad KinStruct focuses on providing a real time system that can be used on an average computer without the need for special hardware Beneficiaries : • • • Entities work in advertising and showcasing of 3D models. Entities work in Construction of rooms and furniture for measurements and decoration. Vision systems for autonomous robots. Important Links: /watch?v=6ZM4LUnoULE • Dr. Marwan A. Torki 2. Khaled A. Mohamed 3. Helal Hamed 4. Yassin Mohamed Gamal 5. Yehia ElSaka Academic Affiliation: Alexandria University, Faculty of Engineering, Computer And Systems Engineering. Team Representative Contacts: Khaled A. Mohamed 01284983166 [email protected] Project Requirements: Funding to customize the system for a specific usage, or selling it to a specialized company in the system’s field. 9|Page Sponsored by 1.2 Efhamny ﺇﻓﻬﻤﻨﻲ Field/ Area: Kinect Sponsor: Microsoft Project Contacts: Project Idea and Novelty: A program for general gesture recognition is presented and tested with isolated signs of sign language. Other than common systems for sign language recognition, this framework makes use of Kinect, a depth sensor developed by Microsoft and PrimeSense, which features easy extraction of important body parts. Recognition is done using hidden Markov models with a discrete observation probability. The program also offers an easy way of initializing and training new gestures or signs by performing them several times in front of the camera. Results show a recognition rate of > 85% for fourteen signs when they are trained by more than one person. Supervisors: • Dr. Mohamed E. Ahmed • Dr. Marwan A. Torki Team Members: 1. Ahmed Elsharkawy 2. Ibhraemy Bakery 3. Mazen Aly Beneficiaries: • Deaf and mute "handicapped people". Project Requirements: • Sponsorship. 4. Mohamed Osman 5. Sherif Elbanna Academic Affiliation: Alexandria University, Faculty of Engineering, Computer And Systems Engineering. Team Representative Contacts: Mohamed Osman [email protected] 10 | P a g e Sponsored by 1.3 Wheelect, Kinect for Wheelchair Users Field/ Area: Kinect Sponsor: Microsoft Project Contacts: Project Idea: Wheelect translates the wheelchair users’ motion into a regular human motion. The idea is implemented with an application that uses only the upper body joints to get gestures from the wheelchair user and generates the full body joints correspondent the gesture that has been recognized. Novelty: The project is using Kinect to help the disabled have the same Kinect experience that anyone will go through. Supervisors: • Dr. Mohamed H. Mousa Team Members: 1. Abdulrahman A. Yehia 2. Amy Moustafa 3. Khaled Faiad Beneficiaries: 4. Mai Nasr The Kinect developer, he’ll be able to consider the wheelchair users easily in his application. 6. Nourhan Nasr Project Requirements: Sponsorship. 5. Mostafa Ihab 7. Zainab Elghandour Academic Affiliation: Suez Canal University, Faculty of Computers and Informatics, Computer Science department Team Representative Contacts: Mostafa Ihab 0106-512 2072 [email protected] 11 | P a g e Sponsored by 1.4 Robotic Arm Copying Human Arm Motion Using Kinect Field/ Area: Kinect Sponsor: Microsoft Project Contacts: Project Idea: The project aims to control any mechanical system using the Kinect Sensor, as it opens a new generation of remote control of mechanisms instead of pure programming or manual control. This idea is incorporated by controlling a robotic arm by our human arm using the Kinect sensor. Supervisors: • Prof. Dr. Hisham EL-Sherif Team Members: 1. Ahmed Raouf Fahmy Novelty: The project leads to fully understand the flow of information and data between the Kinect, motor controller (Arduino) and motors. It introduces a new idea of mechanical control. Beneficiaries: This project can be used in medical operations instead of using robotic arms controlled by joysticks as well as it can be used on production lines for precision and better performance. It can be used in dangerous sites for the safety of the operator as the operator can control it from a safe distance and it can increase the employment of disabled people as the operator doesn’t have to move from his/her place to execute the operation. 2. Ahmed Hisham El Bibany 3. Hassan Fathy El Gohary Academic Affiliation: The German University in Cairo, Faculty of Engineering and Material Sciences, Mechatronics Department. Team Representative Contacts: Hassan El Gohary 01275992110 [email protected] Important Links: /watch?v=mS-rofOwAHg Project Requirements: Sponsor to develop this model into an industrial robotic arm. 12 | P a g e Sponsored by 2 Embedded systems 2.1 Smart Traffic Using Zigbee Wireless Network Project Contacts: Field/ Area: Embedded systems Sponsor: ITI & Valeo Project Idea: Smart Traffic solves many problems such as lack of respect for traffic rules and the large increase in road accident and car theft. This is done by using wireless communication system depends on Zigbee technology. The project is implemented by the installation of control and monitor devices in every car and at certain points in roads, the master control unit will manage the operation of these devices. Smart Traffic three main objectives are : Traffic regulation, Car theft reduction and to guarantee respecting the determined road speed. Novelty: 1. A lot of services in one system with low cost (no wires and no human element). 2. Recording the car violations at any time and at any place over the road. The whole road is covered. 3. There is no license to use this system so any one can use it without any monthly costs. Beneficiaries: Car owners/Drivers, Car ManuGovernment for traffic points instillation. Important Links: Supervisors: • Dr. Heba El-Khobby Team Members: 1. Mohamed A. Azzam 2. Mohamed A. Fathy Hussein Academic Affiliation: Tanta University, Faculty of Engineering, Electronics and Electrical Communication department. Team Representative Contacts: Mohamed A. Azzam 0128 586 45 12 [email protected] Project’s E-mail: [email protected] /watch?v=qpv2maCMeTo Project Requirements: Funds, Technical Experts and Facilities to test the project, and to develop the available prototype more. 13 | P a g e Sponsored by 2.2 Car Black Box System Field/ Area: Embedded systems Sponsor: ITI & Valeo Project Contacts: Project Idea: Car Black Box System proposes a solution to help minimizing car accidents. The solution is consisting of two main components; a hardware unit and a set of software applications, both responsible for collecting data, analyzing it, and acting based on it for the purpose of preventing accidents and minimizing casualties before, while, and after its occurrence. Novelty: The project combines the work of a set of hardware modules in a simple-designed algorithm controlling, analyzing, and acting based on the data acquired through them, and offering a base data for further development of more-complex-analysis applications. Beneficiaries: Law Enforcement Authorities, Insurance Companies, and Transportation Companies. Important links: /CBBS.ASU Project requirements: Supervisors: • Prof. Dr. Hazem Abbas Team Members: 1. Abdel Rahman O. Diab 2. Diaa El-Din Mohamed 3. Rehab Shaheen Ameen 4. Karim Mohamed Ragab 5. Mona Saleh Abdul Aziz 6. Muhammad El Orabi Academic Affiliation: Computer and Systems Department, Faculty of Engineering, Ain Shams University Team Representative Contacts: Muhammad El Orabi 01007982145 [email protected] Technical and financial sponsors. 14 | P a g e Sponsored by 2.3 Smart Blind Stick Field/ Area: Embedded systems Sponsor: ITI & Valeo Project Contacts: Project Idea: The Smart Blind Stick aims to facilitate the movement of the blind people by solving three problems they usually face, by: 1- Fixing a sensor on stepper motor that measures ranges in many directions and leads the user to the suitable direction so they can avoid obstacles. 2- RFID tagging of each object and special glove with a module (RFID Reader) to help identifying different objects. By just moving hands on objects a buzzer i.e. (one tone for an object, 2 tones for another one,… etc.) will tell the user what the object is. Supervisors: • Dr. Mohamed Abd ElAzim Team Members: 1. Ahmed Moawad Awad. Novelty: 2. Ahmed Helmy Radwan. The Smart Blind Stick will be a full first “made in Egypt” product, high quality and suitable price. It solves problems that aren’t addressed before by other products and with less expected cost. 3. Nesma ZeinElabdeen. Beneficiaries: The major beneficiaries of the product are the blind and visually impaired people (Users), Medical devices companies (Manufacturers/ Distributors) and blind people associations. Important Links: /SmartBlindStick 4. Ayman Elbaz. 5. Aya Gamal ElMansy. 6. Fatma Ayman Mohamed Academic Affiliation: Communications and Electronics Department, Faculty of Engineering, Mansoura University. Team Representative Contacts: Ahmed Helmy 01004453081 [email protected] Project Requirements: • • Funds to prepare labs to develop project’s prototype. Technical experience related to the solution. 15 | P a g e Sponsored by 3 Social Networking 3.1 Sentiment Analyzer and Summarizer for Arabic News and Users Comments Field/ Area: Social Networking Sponsor: Technology Innovation & Entrepreneurship Center (TIEC) Project Idea: The system includes two modules: 1. An automatic summarizer and sentiment analyzer to summarize and analyze comments on the news posts on Facebook 2. Automatic collector and summarizer for articles about a certain subject from news websites. Novelty: This is the first Arabic application that gets summary of news, and analyzes summary and sentiment in Facebook comments. Project Contacts: Supervisors: • Dr. Alaa Hamouda Team Members: 1. Aber Mohamed Mahmoud 2. Farida Mohamed Youness 3. Fatma El-Zahraa Eltaher 4. Fatma Mohamed Ahmed 5. Fawzia Zaki Mohamed 6. Nehal Ahmed Mohamed Academic Affiliation: Computer Engineering, Computers and System Department, Al- Azhar University. Beneficiaries: Politicians, Journalists, Opinion Analysts and People looking for news and opinions. Project Requirements: Team Representative Contacts: Fatma El Zhraa Eltaher 011141600434 [email protected] Funds, marketing agency, to market the application and technical experts to advise us about the technical issues. 16 | P a g e Sponsored by 4 Cloud Computing 4.1 Q and A Project Contacts: Field/ Area: Cloud Computing Sponsor: EMC² Project Idea: Q and A is an NLP (Natural Language Processing) open-domain question answering system. Its goal is to retrieve short answers to users’ English questions that are written in natural language, rather than retrieving complete documents or best matching passages like what most of the information retrieval systems do. Q and A extracts answers from any collection of texts by combining syntactic and semantic analysis and using different knowledge sources. The collection of texts could be obtained from any user supplied document. Novelty: Q and A enables the user to supply a specific knowledge source to the system and it is an open-domain one, so the user can ask any questions in any domain and get exact short answers. Beneficiaries: Doctors and patients (Medical diagnosis), teachers, researchers, students can use it for academic purposes, and Business consultants in fields like marketing, finance, legal and many others. Supervisors: • Dr. Magda Fayek. Team Members: 1. Ahmed Mahmoud Orabi. 2. Ahmed Ali Onsy. 3. Fady Magdy Mohamed. 4. Mohamed Sherief Ali. Academic Affiliation: Cairo University, Faculty of Engineering, Computer Engineering Department. Team Representative Contacts: Mohamed Sherief 01004764189 [email protected] Project Requirements: Funds. 17 | P a g e Sponsored by 4.2 Innovative Solutions for Universities research Field/ Area: Cloud Computing Project Contacts: Sponsor: EMC² Project Idea: The project is an implemented a server consolidation strategy in the team’s faculty's small data-center using the Cloud Computing/Virtualization technology and showed innovative solutions. Supervisors: • Prof. Dr. Nawal A. EL-Fishawy. Novelty: The project offers: 1- Virtual servers with variant specifications to facilitate the practical implementation of the large graduation projects that require powerful servers. Also for research programs and university IT administrators (including web, database, mail, DC servers, etc…). 2- Virtual/Thin applications to facilitate the academic study in labs aiding students to work with the programs that need high processing requirements over the university private cloud environment like Matlab and Netbeans. 3- Virtual Desktops for researchers, professors and university employees Beneficiaries: Researchers – Professors – Students – employees/staff – System Cloud Administrator University Important Links: /TheInevitableCloud /groups/InevitableCloud Team Members: 1. Mohamed M. Zein ElDein 2. Mohamed M. El-Shorbagy 3. Ahmed M. Abo Kamla 4. Abdelrahim A. Abo-Douh 5. Amgad S. Boshra Amin 6. Ahmed H. Abdel-Haddy 7. Ahmed S. Anour hewedy 8. Sadek Abdel-Naser Sadek 9. Emad Abdo Gaber Ahmed 10. Haroun Ahmed Bakr Academic Affiliation: Menoufia University, Faculty of Electronic Engineering, Electronics and Electrical Communications Engineering Department. Team Representative Contacts: Mohamed Mohamed Zein El-Dein 01114477470 Project Requirements: Qualified stuff, some little investment the data-center and some technical experts. 18 | P a g e Sponsored by 5 BROADBAND 5.1 Smart Communication System using universal software radio peripheral Project Contacts: Field/ Area: Broadband Sponsor: National Telecom Regulatory Authority (NTRA) Project Idea: The project consists of three elements: • • • Private mobile Network (PMN): a small network GSM mobile phone or WiFi . Jamming system to prevent any mobile calls in some area where it is needed to block . Signal optimization tool to study the network parameters and show band details. Novelty: Link Open BTS with Wi-Fi, a simple GUI that can control the whole system, SMS, increase call time , Enhanced call Quality (by selecting empty bands ) , Full control on users, Smart jammer in GSM band using low power, Jamming on 3G. Project’s main advantages: • • • • PMN allows expensive resources sharing between different locations. More cost effective than other traditional options. Project’s Jammer is not harmful. Project’s spectral analyzer make optimization more easier . Beneficiaries: Originations, Universities, Companies, Hospitals, Military purposes, Factories, Drilling rigs and offshore vessels. Supervisors: • Prof. Mohammed Abo-Zahhad • Prof. Sabah Mohamed Ahmed Team Members: 1. Abd-ElRahman Sayed Heikal 2. Abd allah Sayed Mahran 3. Mostafa Mahmoud Thabet 4. Abd-Elhy Mohamed 5. Ali Atef Ali El-Sayed 6. Alaa El-din Essam 7. Alaa M. Mohamed Mahran 8. Tareq Mahmoud Baker 9. Ahmed Osman 10. Maha Abdel Nasser 11. Al-Shaimaa Taha 12. Doaa Shalaby Mahmoud 13. Laila Abo Baker Ramadan 14. Latifa Mohammed amen Academic Affiliation: Department of Electrical Engineering, Faculty of Engineering, Assiut University. Team Representative Contacts: Abd-ElRahman Sayed Heikal 01285495479 [email protected] Project Requirements: Sponsorship. 19 | P a g e Sponsored by 5.2 Intelligent Optimization Tool "IOT" Field/ Area: Broadband Sponsor: National Telecom Regulatory Authority (NTRA) Project Contacts: Project Idea: IOT is a mobile communication software tool which: • • • • • Optimizes the physical configuration of sites, Improves the main KPI s' parameters of the network and determines the number of needed resources in network in order to increase the utilization of the network resources, Improves the network performance with the existing resources with consideration of the balance coverage, Capacity and quality in network through intelligent algorithms to give accurate decisions which are based on Traffic statistics analysis, Drive test analysis and mathematical equations to identify the probable solutions for Existing problems then visualize results on maps and by using Standard Propagation Model to ensure that the results will be correct and accurate. Supervisors: • Dr. Heba youssef Soliman Team Members: 1. Mohamed Essam zaki 2. Ahmed Hassan El Zayet 3. Amr Ahmed El Orbany 4. Ahmed Abd El Razek Ahmed 5. Essraa Taha Ali 6. Hala Mohamed Abd El Wahab 7. Mai Ahmed Abd El Noor 8. Samar Hamdy Abd El aziz Novelty: IOT increases the utilization of the network resources, increases number of users with a good quality, solves the existing and potential problems on the network and identify the probable solutions for future network planning. Beneficiaries: Mobile Operators, Vendors (Alcatel-lucent, Ericsson, Huawei, etc.), Subcontractors, Governmental Authorities like NTRA. Academic Affiliation: Port Said University, Faculty of Engineering, Electronics & Communications department. Team Representative Contacts : Mohamed Essam zaki 01063620405 [email protected] Important Links: /IOTproject 4TU U4T Project Requirements: Technical Experts. 20 | P a g e Sponsored by 5.3 Open BTS for rural communications: Network design & system analysis Field/ Area: Broadband Sponsor: National Telecom Regulatory Authority (NTRA) Project Contacts: Project Idea: The project proposes to cover large conventional cell area by a cluster of BTSs connected to each other mounted on inexpensive poles to reduce the towers cost and one of BTSs connected to the internet. Analysis, simulation and design of a cost-effective inter-BTS wireless links using available GSM channels. The conversion of signaling messages from the GSM Um-interface to a format suitable for SIP signaling to a centralized VoIP switch over the GSM channel connecting the BTSs, and the proof of its feasibility through simulation. Novelty: The project uses the RF link in inter BTSs connection due to the low capacity in the rural areas so we can have a call between two open BTSs nodes at two different locations without using the internet connection and by using 8-PSK modulation the BTSs link time-slots capacity can be tripled to achieve better performance. Beneficiaries: The Telecommunication companies shall benefit from the inexpensive coverage of rural areas. Supervisors: • Prof. Dr. Magdi Fikri Team Members: 1. Hassan Ali Mohamed Ibrahim 2. Hussein Magdy Hussein Ali 3. Mohamed M. Sabry Amin 4. Mohamed Mahmoud Abbas Academic Affiliation: Cairo University, Faculty of Engineering, Communications & Electronics department. Team Representative Contacts: Hassan Ali Mohamed Ibrahim 01285337238 [email protected] Important Links: /watch?v=2qgUUbYpF0I Project Requirements: Seeking for fund to have 3 USRPs type B100 with WBX board, they are needed to implement the idea, as the GSM inter-BTS link is being developed. 21 | P a g e Sponsored by 6 SMART Building 6.1 Power Generation Using Renewable Resources (Solar energy & Biomass energy) Project Contacts: Field/ Area: Smart Building Sponsor: Smart Villages Project Idea: In this project, a hybrid system is used for electricity generation using a sterling engine. The energy sources for this system are biomass and solar energy. During day time, Dish/engine systems convert the thermal energy in solar radiation to mechanical energy and then to electrical energy. During night time, A biomass gasifier is used to convert organic based materials (wood blocks, rice straw...etc.) into a combustible gas that composed of Carbon monoxide, Hydrogen, Carbon dioxide and methane then burn this gas to run the sterling engine . Novelty: Supervisors: • Prof. Dr. Ibrahim M. Shafie Team Members: 1. Mohammad Omar Sayed. 2. Mohammad Samir Abdullah 3. Mohamed A. Abd El-Ghafar 4. Mohammed Sayed Ali Haredy 5. Muhammad Abdulmoez Zaker 6. Ahmed Abdou Mohamed 7. Mohammed Fawzy Ahmed This project overcomes the problem of solar energy absence at night or when clouds exist by the integration of two renewable resources (biomass & solar energy). Academic Affiliation: Assiut University, Faculty of Engineering, Mechanical Department Beneficiaries: Team Representative Contacts: Mohammad Omar Sayed 01112283201 Factories, reduce air pollution and overcome energy demand and farms where agricultural residues are freely available. [email protected] Important Links: /watch?v=mOz-zwbGoLI - /watch?v=UduZ1excb7E Power Generation Using Renewable Resources (Biomass & Solar Energy) Project Requirements: Fund to complete the advanced work in the project. 22 | P a g e Sponsored by 6.2 Photovoltaic Smart Micro-Grid compatible with Grid-Tied Distributed Generation and Standalone Applications. Field/ Area: Smart Building Project Contacts: Sponsor: Smart Villages Project Idea: The main aim of the project is development of sustainable renewable energy Distributed Generation (DG) using solar radiation as an ultimate and clean renewable resources that can be used in both the residential and commercial applications. It introduces new control strategies for the renewable Micro-Grids to be connected together and contribute to the power generation of the country, the matter which limits the requirements of erecting new distributing transformers needed to meet the load growth each year and the need of load shedding during peak hours. Novelty: Novel design for high efficient transformer-less, low cost and compact size (Grid Tie Inverter) referred as "Boost inverter", this proposed inverter is only composed of single power stage that produces inverted output at the Grid R.M.S Voltage level while keeping maximum power point tracking (P&O) algorithm to ensure maximum output power. Supervisors: • Prof. Dr. Ahmed A. El Serogy Team Members: 1. Mohamed A. Abdul Razek 2. Mohamed Said Ibrahim 3. Mohamed Ahmed Hamedo Academic Affiliation: Electrical Power and Machines Department , Faculty of Engineering , at Alexandria University. Team Representative Contacts: Mohamed Ahmed Abdul Razek 01272721056 [email protected] Beneficiaries: Governments, renewable concerned companies. Important Links: Smart Solar Micro Grid Project Requirements: More suitable and careerist environment for the development of the prototype, financial and technical support for the proposed designs to be commercialized. 23 | P a g e Sponsored by 7 Mobile Applications 7.1 E-phone "Educational Phone" Project Contacts: Field/ Area: Mobile applications Sponsor: Nokia Project Idea: E-Phone is application aims to serve the illiterates which is considered as simulation for what happen in literacy classrooms, where it consists of many levels, each one is divided into learning mode and test mode, also there are games which add entertainment to E-Phone. Novelty: E-Phone is in Arabic language, an Arabic speech recognition engine which isn't used in any application before. However no real ASR application by Arabic language, so “E-Phone” is appeared . Beneficiaries: Illiterate persons are the main beneficiaries (charitable organization and other have initiatives to solve illiteracy problem), also young children and foreign people who want to learn Arabic language can use it. Project Requirements: • • Technical Experts. Facilities, so that, the project can reach R&D departments in concerned companies . Supervisors: • Prof. Dr. Mohsen Rashwan Team Members: 1. Mostafa A. Saad 2. Mostafa Abdallah El-Hosiny 3. Mostafa Magdy Montaser 4. Moataz Ahmed Lasheen 5. Motaz Mostafa AbdEl-Halim Academic Affiliation: Electronics and Electrical Communication Engineering Department Cairo University. Team Representative Contacts: Motaz Mostafa AbdEl-Halim 0100 76 18 468 [email protected] 24 | P a g e Sponsored by 7.2 Asfaroat – ﻋﺼﻔﺮﻭﺕ Field/ Area: Mobile applications Sponsor: Nokia Project Contacts: Project Idea: Asfaroat is crowed sourcing, location-based, time-sensitive, and customer rated mobile application. It provides: • Automatic detection of users’ location and determining the in range services (2˷5 KM specifically) & the contact details of these services. Showing the routes to reach them. Offering a list of all (or users’ favorites) services in the vicinity of that location, Information on availability and opening hours, Providing customers’ rating and reviews of each service Allow for customers to register their services. P • • • • • P Supervisors: • Dr. Diyaa-Addein M. Atiya Novelty: Team Members: 1. Omnya Alaa Eddin Ali 2. Safaa Mohammed Amin 3. Engy Salah Abdel Hamid The project diffuses the use of Mobile technology in business promotion to a traditionally Outcast category of local handymen, help for better decision making for customers, catch offers in time, and time and effort saving. Academic Affiliation: Cairo University , Faculty of science, Computer Science department. Beneficiaries: Communication companies, restaurants , technical service providers like auto repair workshops and gas stations, urgent services Like hospitals and ambulances, and metro stations. Team Representative Contacts: Omnya Alaa Eddin Ali 01111803058 [email protected] Important Links: /watch?v=P_Akaisqvzc 4TU U4T /3asfaroat 4TU U4T Project Requirements: Sponsors to include SMS system for non smart phones users and fund for marketing campaigns, salaries and Hiring a Host. 25 | P a g e Sponsored by 7.3 3la El Tare2 Field/ Area: Mobile applications Sponsor: Nokia Project Contacts: Project Idea: 3la El Tare2 is a full automated navigation system for the traffic. It manages the flow of traffic through helping users in detecting the best route (less traffic) to follow between the current position and the target. There is a camera module system on the streets to collect streets’ photos. Then, the system detects the traffic factor for each street and save it on the database. The users act with the system by an application installed on their smart phones. Novelty: The system is a full automated, that gives real time results with minimum error using new image processing technique, and the application is very easy to use. Beneficiaries: • Ministry of the Interior and the Traffic Administration. • Citizens (users) of Mobile Application. Important Links: ITehawy Project Requirements: • Funds. • Facilities “For cameras’ building”. • Sponsors for buying the equipments. Supervisors: • Professor Aboul Ella Hassanien Team Members: 1. Ahmed Tarek Ahmed 2. Ahmed Samir Mohamed 3. Eslam Shaban Gaber 4. Ramy Mohamed Saad 5. Saaed Yehia Sokar 6. Younos Ali El-Shamy Academic Affiliation: Cairo University, Computers and Information, Information Technology department. Team Representative Contacts: Saaed Yehia Sokar 01112566625 [email protected] [email protected] 26 | P a g e Sponsored by 8 VLSI 8.1 Design of Digitally Controlled Timer Based Linear Battery Charger for Power Management Units Project Contacts: Field/ Area: VLSI Sponsor: Intel Project Idea: State of the art Digitally Controlled Timer Based Linear Battery charger for power management units is proposed and designed in this project. It charges 3 V Li-Ion batteries with maximum efficiency up to 91% and ± 0.5% final voltage error in 90 minutes charging time. This battery charger consumes less than 545 μW from 3.3 V supply. The chip area is 0.04 mm², not including the pass transistor, using 0.13 μm process technology. This linear battery charger uses constant current constant voltage charging profile. A digital controller is proposed for efficient transition between constant current and voltage modes. The charging profile is subjected to user specified timer module for protecting the battery from over or under charging. Supervisors: • Dr. Sameh Ibrahim • Dr. Mohamed El-Nozahi Team Member: 1. Eng. Mohamed Saad Academic Affiliation: Ain Shams University. Team Representative Contacts: Eng. Mohamed Saad 01001079562 [email protected] Project Requirements: The project implementation needs monetary fund to be fabricated, which can be done through an IC design company introducing power management ASIC solutions.As the market share of the power management ICs is expected to be $10B by 2015 27 | P a g e Sponsored by 8.2 A Multi-Standard Receiver Based on Application Specific Instruction Set Processor (ASIP) Project Contacts: Field/ Area: VLSI Sponsor: Intel Project Idea: The project targets building wireless receivers by repeating identical innovative processing blocks. Together, they can be reprogrammed to support a large number of symbol domain algorithms, for several modes, in many standards. Through multiple innovations in the architecture, the building block supports this high flexibility while providing dedicated hardware- like performance. This can be used to design singlestandard wireless receivers with very short time to market, or it can be used to design reconfigurable receivers that support multiple standards with very low energy consumption. Novelty: Building a reconfigurable engine (ASIP) that support many communication systems without sacrificing the power and throughput. The design is modular and easy to expand to support future systems with higher throughput. Efficient implementation for FFT algorithm using CORDIC. Beneficiaries: Wireless transceiver designers(since the design delivers both programmability and performance, the design cycle can be dramatically shortened), Patients using telemedicine devices. Consumers (the design will leads to cheaper portable receivers and a much shorter time to market). Supervisors: • Dr. Omar Nasr • Dr. Karim Osama Team Member: 1. Ali Ahmed Seddiek 2. Mohamed Ahmed Raghib 3. Mohamed A. Elmotaz Bellah 4. Mohamed Wageh Emam 5. Nassr Alden Mohamed Ismail Academic Affiliation: Cairo University, Faculty of Engineering. Team Representative Contacts: Nassr Alden Ismail 01111904802 [email protected] Project Requirements: Fund. 28 | P a g e Sponsored by 9 EDA/CAD 9.1 TRIO - Triple Patterning Decomposer Project Contacts: Field/ Area: EDA/CAD Sponsor: Mentor graphics Project Idea: Triple patterning was developed for photolithography to enhance the feature density. In the semiconductor industry, double patterning is the primary lithography technique introduced for the 32 nm node. As dimensions continue to shrink in the 14nm and below a need for a third mask is becoming essential, so triple patterning is a new trend that is needed in these submicron technologies to enable printing features in the 14nm and below on a 45nm node lithography process. Novelty: Considering run time complexity, TRIO is implemented, from scratch, with three various acceleration techniques so as to fasten polygons splitting. TRIO also adopted a novel splitting technique based on modifications of the SAT (Saturated Coloring) algorithm, and equal density distribution algorithm. Beneficiaries: Researchers and EDA Companies like Intel, Mentor Graphics and Synopsys. Supervisors: • Prof. Dr. Amr Wassal Team Member: 1. Mohammed Mansour. 2. Safaa Mohammed. 4. Shahenaz Hesham. 5. Tasnim Samir. Academic affiliation: Cairo University, Faculty of Engineering, Computer Department. Team representative Contacts: Mohammed Mansour 01005815667 [email protected] [email protected] Important Links: /TrioCU2012 Project Requirements: Sponsors to fund the project to find a place for a startup, and hire employees to work and continue enhancing according to the market requirements. 29 | P a g e Sponsored by 9.2 Web-Based Analog Design Using Tradeoff Charts. Field/ Area: EDA/CAD Sponsor: Mentor Graphics Project Idea: Analog design is characterized by the large number of circuit specifications and corresponding large number of design parameters. Therefore, many tradeoffs exist in the design process. Our project is an EDA tool called TOAIC (Tradeoffs of Analog Integrated Circuits). TOAIC is a chart-based design environment that enables the designer to visually explore the important tradeoffs in analog designs which leads to better designs completed in less time. TOAIC is a web-based tool allowing designers to use the tool without installing any software. Novelty: • • • It’s A chart-based, web-based analog EDA tool. The tool was developed using open source programming languages and free license tools. The tool has a friendly GUI which makes it very easy to use. Project contacts: Supervisors: • Dr. Mohamed Dessouky Team Member: 1. Ahmed Hamza Sayed 2. Mohamed Ali Mohamed 3. Andrew Philip Farid Academic Affiliation: Electronics & Communications Engineering Department, Faculty of Engineering, Ain Shams University. Team Representative Contacts: Ahmed Hamza Sayed 01285313667 [email protected] Beneficiaries: Analog designers throughout the world. Important Links: www.toaic.com 30 | P a g e Sponsored by 9.3 Layout Stress and Proximity Aware Analog Design Methodology Field/ Area: EDA/CAD Sponsor: Mentor graphics Project Contacts: Project Idea: This project presents a new methodology for analog circuits design which takes into account layout dependent effects and layout interdependencies between devices. Analog Devices’ performance is impacted by other layout features located in near context. These layout effects can lead to catastrophic failures in analog circuits. The new introduced methodology helps Analog designers to determine the effect of layout interdependencies at early stages of the design by introducing a layout-aware schematic design level. Novelty: Allowing designers to access and analyze transistor nonidealities caused by neighboring devices and structures in the layout. Beneficiaries: Circuit Designers, Research and Development and Foundries. Supervisors: • Dr. Mohamed Dessouky Team Member: 1. Mohamed Bahr 2. Amr Tarek 3. Ahmed Aly Academic Affiliation: Communication Systems Credit Hours Engineering Program, Faculty of Engineering, Ain Shams University. Team Representative Contacts: Mohamed Bahr 01009992902 [email protected] 31 | P a g e Sponsored by 10 SOFTWARE Engineering 10.1 Distributed programming language and model Field/ Area: Software Engineering Sponsor: ITIDA Project Idea: Provide a new high level distributed programming language, that is efficient, easier to learn, expand and use unlike most of the current distributed programming languages. Novelty: The new programming language reducing development time and aiding maintenance while introducing a syntax that is a mix of C++, Bash and a new syntax to make it quickly comfortable for a large number of software engineers and novices. Project Contacts: Supervisors: • Prof. Dr. Ahmed Tawfik Team Member: 1. AbdAllah Aly Saad Academic Affiliation: October University for Modern Science and Arts (MSA), Faculty of computer science, department of computer science. Team Representative Contacts: AbdAllah Aly Saad 01155586460 [email protected] Beneficiaries: Any interested investor or researcher who want to exploit distributed systems (telecommunication, genetics research field, banking systems). Project Requirements: • • Technical Experts to expand the language and add more libraries and to provide specific requirements for the interested parties ( i.e. telecommunication engineers ). Funds for purchasing special devices related to their projects and Facilities related to the project. 32 | P a g e IBTIECAR 2012 Judges Dr. Abeer Qurany Cairo University _ Faculty of Computer and Information Dr. Ahmed Farag Helwan University / MCIT Dr. Ahmed Lotfy Information Technology Institute (ITI ) Eng. Alaa ElZanaty Smart Village Company Dr. Amr Bayoumi Technology Innovation and Entrepreneurship Center (TIEC) / Arab Academy for Science, Technology & Maritime Transport Dr. Amr Kamel Information Technology Industry Development Agency (ITIDA) Dr. Bassem A. Amen Technology Innovation and Entrepreneurship Center (TIEC) / Ain Shams University Dr. Dalia Gamal Technology Innovation and Entrepreneurship Center (TIEC) Dr. Emad Hegazy Intel / Ain Shams University Dr. Fadel Daigham National Telecom Regulatory Authority (NTRA) Dr. Galal Hassan Cairo University _ Faculty of Computer and Information Dr. Haitham Hamza Information Technology Industry Development Agency (ITIDA) Dr. Hisham Farouk Technology Innovation and Entrepreneurship Center (TIEC) Dr. Khald El Sekoury Institution of Electronics Dr. Magdy El Morsy Mentor Graphics Dr. Maged Ghonima Technology Innovation and Entrepreneurship Center (TIEC) / Ain Shams University / American University In Cairo (AUC) Dr. Moataz Al Sabaan Advanced Technology Lab Cairo_ Microsoft Dr. Mohamed Dessouky Mentorgraphics/ Ain Shams University Dr. Mohamed El Nozahy Mentorgraphics/ Ain Shams University Eng. Mohamed Emara VLSI reactor 33 | P a g e Dr. Mohamed Khairy Cairo University Dr. Mohamed Khella Intel Dr. Mohamed Shalaan Technology Innovation and Entrepreneurship Center (TIEC) Eng. Mostafa Ashour Advanced Technology Lab Cairo_ Microsoft Dr. Nayer Wannas American University In Cairo (AUC) Eng. Nouran Hasan Advanced Technology Lab Cairo_ Microsoft Ms. Ola Elwan Advanced Technology Lab Cairo_ Microsoft Dr. Omar Nasr National Telecom Regulatory Authority (NTRA) / Cairo University Eng. Ossama Shoaieb NOKIA Eng. Safy Edeen Khalil Valeo Dr. Sherif Aly Technology Innovation and Entrepreneurship Center (TIEC) / American University In Cairo (AUC) Dr. Tarek Nabhan ITworx Dr. Wael Farag Cairo University Eng. Walaa Edeen Abd ElHady EMC² 34 | P a g e IBTIECAR Editors 2012 Booklet Dr. Dalia Gamal Eng. Nahel Muhammad Amirah Eng. Reem Saber Sharaf IBTIECAR 2012 Working Team Dr. Dalia Gamal Reem Saber Sharaf Shady Khair Eldin Competition and Academia Innovation support Unit Manager Asmaa Tayseer Project Coordinator Academia Innovation Unit Social Media Manager Web developer Remon Botros Ghaly Video Editor Maha Darweesh Project Coordinator 35 | P a g e