continuous hinges

> Continuous
> Butt
> Specialty
CONTENTS
6
8
14
14
14
14
Hinge Nomenclature
Continuous Hinges
316 STS Hinges
Electrogalvanized Hinges
Raw Brass
Polished Stainless w/holes
15
15
15
16
18
19
Preplated Steel w/holes
Plastic Hinges
Stop Hinges
Butt Hinges
Weld-on Hinges
Concealed Hinges
19
20
21
22
24
24
Latch Hinges
Un-Hinges
Invisible Hinges
Slip Joint Hinges
Flag Hinges
Continuous Slip Hinges
24
25
25
25
26
Institutional Hinges
Strap / T-Hinges
Bifold Screen Door Hinges
Cover Hinges
Spring Hinges
HINGE NOMENCLATURE
NOMENCLATURE
Leaf
Leaf
Pitch
Pitch
Pin
Pin
End
End Play
Play
Open
Open
Width
Width
Paint
PaintClearance
Clearance
Knuckle
Length
Knuckle Length
Leaf
Leaf
Width
Width
Knuckle
Knuckle
Length
Length
Length
The length of the leaves measured parallel to the pin.
SWAGING
Open Width
The overall dimension of the leaves measured perpendicular, or across the pin.
Leaf
That portion of a hinge extending laterally from the knuckle, which generally revolves around a pin.
Fig. 1
Hinge with both leaves not swaged –
our “plain” or standard assembly
Leaf Width
The dimension from the center of the pin to the outer edge of the leaf.
Paint Clearance
The dimension between the outer face of the knuckle and the opposing edge of the leaf cutout over
the entire range of rotation.
End Play
The amount of axial movement between the leaves.
Fig. 2
Hinge with both leaves half swaged
Knuckle Length
The typical dimension of the knuckle measured parallel to the pin.
Pitch
The dimension from a point on the knuckle to the same point on an adjacent knuckle on the same leaf.
Knuckle
The hollow circular part at the knuckle of a hinge through which a pin is passed.
(Sometimes called loop, joint, node or curl.)
Pin
Rod running the length of the hinge. The pin holds the leaves of the hinge together.
Fig. 3
Hinge with one leaf half swaged
Fig. 4
Hinge with one leaf full swaged
Side Play
The amount of movement of the leaves perpendicular to the pin.
270°˚
270
Fig. 5
Swage for reverse assembly
180°
180˚
Open (or Back Angle)
Leaves are opened through the maximum
arc, usually about 270°. This varies from
series to series and can be adjusted for
special applications.
6
Flat
Leaves are parallel, and
at the 180° position.
Closed
Leaves are parallel, together
and at the 0° position.
Fig. 6
Reverse assembly
800-3-HINGES • FAX 631-737-2933
ABBREVIATIONS
PIN
Material
Abbreviation
Plain Steel or Cold Rolled Steel
PS
Stainless Steel (Type 302/304)
STS or SS
Steel Brass Pin
PB
Stainless Steel (Type 316)
TS
Aluminum / Aluminum Pin
AA
Aluminum with Stainless Pin
AS
Raw Brass
BR
Polished Stainless
SP
Prefinished Brass on Steel
FB
Prefinished Nickel on Steel
FN
Prefinished Electrogalvanized on Steel
EG
Hand Codes
Right Hand
The pin or rod that holds hinge leaves together may be furnished in several
ways depending on the application. Some pins are easily removed; others
are permanently mounted. Several variations are illustrated here.
Coined
Pin
End
Crimped
Bent
Pin
Flush
Pin
Welded
Splined
Pin
Staked
Spun
RH or R
Left Hand
LH or L
Reversible
RV
Holes
No Holes
NH
With Holes
WH
FINISH CODES
Digits and letters after the hyphen indicate the finish code
02
Commercial Zinc
02B
Black Zinc
03
Bright Brass
04
Satin (Dull) Brass
1B
Black Powdercoat
14
Bright Nickel
15
Satin (Dull) Nickel
20
Statuary Bronze
26
Bright Chrome
26D
Satin (Dull) Chrome
28
Aluminum, Caustic Etched
28A
Aluminum, Satin and Clear Anodized
28B
Aluminum, Satin and Lacquered
28C
Aluminum, Anodized and Brite Dip
32
Stainless, No Finish
32B
Stainless Steel, Burnished
32D
Stainless Steel, Satin
COMPARISON OF GAUGES & DECIMAL
EQUIVALENTS FOR PLAIN STEEL AND STAINLESS STEEL
Gauge No.
7
8
9
10
11
12
13
14
15
16
U.S. Standard
.1875
.171875
.15625
.140625
.125
.109375
.09375
.078125
.0703125
.0625
Gauge No.
17
18
19
20
21
22
23
24
25
26
U.S. Standard
.05625
.05
.04375
.0375
.034375
.03125
.028125
.025
.021875
.01875
AVAILABLE ALUMINUM THICKNESSES
.020
.025
.032
.040
.050
.060
.075
.080
.090
.100
.120
.160
.190
.249
Note: All dimensions in this catalog are in inches.
7
CONTINUOUS HINGES
STAINLESS, STEEL AND ALUMINUM
Leaf Thick. .025
Open
Width
.75
1.00
1.25
1.50
Leaf Thick. .025
Open
Width
.50
.75
Leaf Thick. .032
Open
Width
.75
1.00
1.06
1.25
1.50
Leaf Thick. .032
MORE LENGTHS
24”, 36”, 48”, 84”
and 96” lengths are
also available — check
www.guden.com for
daily stock updates, or
call us. Custom lengths
are available as well.
Now to complete
Part No. add length:
Ex: PS03030402 - 72
8
Open
Width
.75
1.06
1.25
1.50
Leaf Thick. .035
Open
Width
.75
1.06
1.25
1.50
2.00
* These items are normally supplied with the pin staked in place on 3" centers.
Pin Dia. .062
Knuckle .25
Part Numbers
SS Leaf & Pin
SS02030202*
SS02030203*
SS02030205
SS02030206
Pin Dia. .062
Steel Leaf & Pin
PS02030202*
PS02030203*
PS02030205
PS02030206
Alum w/Alum Pin
AA02030202*
AA02030203*
N/A
N/A
Alum w/SS Pin
AS02030202*
AS02030203*
N/A
AS02030206*
Length
72
Alum w/SS Pin
N/A
N/A
Length
72
Alum w/SS Pin
AS03030402
N/A
AS03030404
AS03030405
N/A
Length
72
Alum w/SS Pin
AS03050202
AS03050204
AS03050205
AS03050206
Length
72
Alum w/SS Pin
N/A
N/A
N/A
N/A
N/A
Length
72
Knuckle .50
Part Numbers
SS Leaf & Pin
SS02030401
SS02030402
Pin Dia. .062
Steel Leaf & Pin
PS02030401
PS02030402
Alum w/Alum Pin
N/A
N/A
Knuckle .50
Part Numbers
SS Leaf & Pin
SS03030402
SS03030403
SS03030404
SS03030405
SS03030406
Pin Dia. .091
Steel Leaf & Pin
PS03030402
PS03030403
PS03030404
PS03030405
PS03030406
Alum w/Alum Pin
AA03030402
AA03030403
AA03030404
AA03030405
AA03030406
Knuckle .25
Part Numbers
SS Leaf & Pin
N/A
N/A
N/A
N/A
Pin Dia. .086
Steel Leaf & Pin
N/A
N/A
N/A
N/A
Alum w/Alum Pin
AA03050202
AA03050204
AA03050205
AA03050206
Knuckle .25
Part Numbers
SS Leaf & Pin
SS04040202*
SS04040204*
SS04040205*
SS04040206*
SS04040208*
Steel Leaf & Pin
PS04040202*
PS04040204*
PS04040205*
PS04040206*
PS04040208*
Alum w/Alum Pin
N/A
N/A
N/A
N/A
N/A
800-3-HINGES • FAX 631-737-2933
STAINLESS, STEEL AND ALUMINUM (cont.)
Leaf Thick. .040
Open
Width
1.06
1.25
1.50
2.00
2.50
3.00
SS Leaf & Pin
SS05050404
SS05050405
SS05050406
SS05050408
SS05050409
SS05050410
Steel Leaf & Pin
PS05050404**
PS05050405**
PS05050406**
PS05050408**
PS05050409**
PS05050410**
Alum w/Alum Pin
AA05050404
AA05050405
AA05050406
AA05050408
N/A
N/A
Leaf Thick. .040
Open
Width
1.06
1.25
1.50
2.00
Knuckle .50
Alum w/SS Pin
AS05050404
AS05050405
AS05050406
AS05050408
N/A
N/A
Pin Dia. .091
Length
72
Knuckle .625
Part Numbers
SS Leaf & Pin
+
SS05050504
+
SS05050505
+
SS05050506
+
SS05050508
Steel Leaf & Pin
+
PS05050504
+
PS05050505
+
PS05050506
+
PS05050508
Alum w/Alum Pin
+
AA05050504
+
AA05050505
+
AA05050506
+
AA05050508
Leaf Thick. .050
Open
Width
1.06
1.25
1.50
2.00
2.50
3.00
4.00
Pin Dia. .091
Part Numbers
Alum w/SS Pin
+
AS05050504
+
AS05050505
+
AS05050506
+
AS05050508
Pin Dia. .120
Length
72.50
Knuckle .50
Part Numbers
SS Leaf & Pin
SS06060404
SS06060405
SS06060406
SS06060408
SS06060409
SS06060410
SS06060411
Steel Leaf & Pin
PS06060404
PS06060405
PS06060406
PS06060408
PS06060409
PS06060410
PS06060411
Alum w/Alum Pin
AA06060404
AA06060405
AA06060406
AA06060408
AA06060409
AA06060410
AA06060411
Alum w/SS Pin
AS06060404
AS06060405
AS06060406
AS06060408
AS06060409
AS06060410
AS06060411
Length
72
MORE LENGTHS
Leaf Thick. .050
Open
Width
1.06
1.25
1.50
2.00
2.50
3.00
SS Leaf & Pin
SS06060504
SS06060505
SS06060506
SS06060508
SS06060509
SS06060510
Steel Leaf & Pin
PS06060504
PS06060505
PS06060506
PS06060508
PS06060509
PS06060510
Alum w/Alum Pin
AA05050504*
AA06060505*
AA06060506*
AA06060508*
AA06060509*
AA06060510*
**Available from stock with Brass Pin – Specify “PB” instead of “PS” as part number prefix.
+
Pin Dia. .120
Knuckle .625
Part Numbers
Part number suffix will be —72
Alum w/SS Pin
AS05050504*
AS06060505*
AS06060506*
AS06060508*
AS06060509*
AS06060510*
Length
85
24”, 36”, 48”, 84”
and 96” lengths are
also available — check
www.guden.com for
daily stock updates, or
call us. Custom lengths
are available as well.
Now to complete
Part No. add length:
Ex: PS03030402 - 72
9
CONTINUOUS HINGES
STAINLESS, STEEL AND ALUMINUM
Leaf Thick. .060
Open
Width
1.06
1.25
1.50
2.00
2.50
3.00
4.00
Leaf Thick. .060
Open
Width
1.06
1.25
1.50
2.00
2.50
3.00
4.00
Leaf Thick. .060
Open
Width
1.06
1.25
1.50
2.00
2.50
3.00
4.00
Pin Dia. .120
Knuckle .50
Part Numbers
SS Leaf & Pin
SS07060404
SS07060405
SS07060406
SS07060408
SS07060409
SS07060410
SS07060411
Pin Dia. .120
Steel Leaf & Pin
PS07060404
PS07060405
PS07060406
PS07060408
PS07060409
PS07060410
PS07060411
Alum w/Alum Pin
AA07060404
AA07060405
AA07060406
AA07060408
AA07060409
AA07060410
AA07060411
Alum w/SS Pin
AS07060404
AS07060405
AS07060406
AS07060408
AS07060409
AS07060410
AS07060411
Length
84
Alum w/SS Pin
AS07060504
AS07060505
AS07060506
AS07060508
AS07060509
AS07060510
N/A
Length
85
Alum w/SS Pin
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Length
72
Alum w/SS Pin
AS07060704
AS07060705
AS07060706
AS07060708
AS07060709
AS07060710
AS07060711
Length
84
Knuckle .625
Part Numbers
SS Leaf & Pin
SS07060504
SS07060505
SS07060506
SS07060508
SS07060509
SS07060510
SS07060511
Pin Dia. .120
Steel Leaf & Pin
PS07060504
PS07060505
PS07060506
PS07060508
PS07060509
PS07060510
PS07060511
Alum w/Alum Pin
AA07060504
AA07060505
AA07060506
AA07060508
AA07060509
AA07060510
N/A
Knuckle .75
Part Numbers
SS Leaf & Pin
SS07060604
SS07060605
SS07060606
SS07060608
SS07060609
SS07060610
SS07060611
Steel Leaf & Pin
PS07060604
PS07060605
PS07060606
PS07060608
PS07060609
PS07060610
PS07060611
Alum w/Alum Pin
N/A
N/A
N/A
N/A
N/A
N/A
N/A
MORE LENGTHS
24”, 36”, 48”, 84”
and 96” lengths are
also available — check
www.guden.com for
daily stock updates, or
call us. Custom lengths
are available as well.
Now to complete
Part No. add length:
Ex: PS03030402 - 72
10
Leaf Thick. .060
Open
Width
1.06
1.25
1.50
2.00
2.50
3.00
4.00
**Available from stock with Brass Pin – Specify “PB” instead of “PS” as part number preffix.
Pin Dia. .120
Knuckle 1.00
Part Numbers
SS Leaf & Pin
SS07060704
SS07060705
SS07060706
SS07060708
SS07060709
SS07060710
SS07060711
Steel Leaf & Pin
PS07060704**
PS07060705**
PS07060706**
PS07060708**
PS07060709**
PS07060710**
PS07060711**
Alum w/Alum Pin
AA07060704
AA07060705
AA07060706
AA07060708
AA07060709
AA07060710
AA07060711
800-3-HINGES • FAX 631-737-2933
STAINLESS, STEEL AND ALUMINUM (cont.)
Leaf Thick. .060
Open
Width
1.50
2.00
2.50
3.00
4.00
SS Leaf & Pin
+
SS07070506
+
SS07070508
+
SS07070509
+
SS07070510
N/A
Steel Leaf & Pin
+
PS07070506
+
PS07070508
+
PS07070509
+
PS07070510
N/A
Alum w/Alum Pin
N/A
+
AA07070508
+
AA07070509
+
AA07070510
+
AA07070511
Leaf Thick. .060
Open
Width
1.06
1.25
1.50
2.00
2.50
3.00
4.00
Knuckle .625
Alum w/SS Pin
N/A
+
AS07070508
+
AS07070509
+
AS07070510
+
AS07070511
Pin Dia. .187
Length
72.50
Knuckle 1.00
Part Numbers
SS Leaf & Pin
SS07070704
SS07070705
SS07070706
SS07070708
SS07070709
SS07070710
SS07070711
Steel Leaf & Pin
PS07070704
PS07070705
PS07070706
PS07070708
PS07070709
PS07070710
PS07070711
Alum w/Alum Pin
AA07070704
AA07070705
AA07070706
AA07070708
AA07070709
AA07070710
N/A
Leaf Thick. .060
Open
Width
1.06
1.25
1.50
2.00
2.50
3.00
Pin Dia. .187
Part Numbers
Alum w/SS Pin
AS07070704
AS07070705
AS07070706
AS07070708
AS07070709
AS07070710
N/A
Pin Dia. .187
Length
84
Knuckle 2.00
Part Numbers
SS Leaf & Pin
N/A
N/A
SS07070806
SS07070808
SS07070809
SS07070810
Steel Leaf & Pin
N/A
N/A
PS07070806
PS07070808
PS07070809
PS07070810
Alum w/Alum Pin
AA07070804
AA07070805
AA07070806
AA07070808
AA07070809
AA07070810
Alum w/SS Pin
AS07070804
AS07070805
AS07070806
AS07070808
AS07070809
AS07070810
Length
84
MORE LENGTHS
Leaf Thick. .072
Open
Width
1.06
1.25
1.50
2.00
2.50
3.00
4.00
+
Pin Dia. .187
Knuckle .50
Part Numbers
SS Leaf & Pin
SS08070404
SS08070405
SS08070406
SS08070408
SS08070409
SS08070410
SS08070411
Part number suffix will be —72
Steel Leaf & Pin
PS08070404
PS08070405
PS08070406
PS08070408
PS08070409
PS08070410
PS08070411
Alum w/Alum Pin
N/A
N/A
N/A
AA08070408
AA08070409
AA08070410
AA08070411
Alum w/SS Pin
N/A
N/A
N/A
AS08070408
AS08070409
AS08070410
AS08070411
Length
84
24”, 36”, 48”, 84”
and 96” lengths are
also available — check
www.guden.com for
daily stock updates, or
call us. Custom lengths
are available as well.
Now to complete
Part No. add length:
Ex: PS03030402 - 72
11
CONTINUOUS HINGES
STAINLESS, STEEL AND ALUMINUM
Leaf Thick. .075
Open
Width
2.00
2.50
3.00
4.00
Leaf Thick. .075
Open
Width
2.00
2.50
3.00
4.00
5.00
Leaf Thick. .075
Open
Width
2.00
2.50
3.00
4.00
5.00
6.00
Leaf Thick. .090
MORE LENGTHS
24”, 36”, 48”, 84”
and 96” lengths are
also available — check
www.guden.com for
daily stock updates, or
call us. Custom lengths
are available as well.
Now to complete
Part No. add length:
Ex: PS03030402 - 72
12
Open
Width
2.00
2.50
3.00
4.00
5.00
6.00
Leaf Thick. .090
Open
Width
2.00
2.50
3.00
4.00
Pin Dia. .187
Knuckle 2.00
Part Numbers
SS Leaf & Pin
SS08070808
SS08070809
SS08070810
SS08070811
Pin Dia. .250
Steel Leaf & Pin
PS08070808
PS08070809
PS08070810
PS08070811
Alum w/Alum Pin
AA08070808
AA08070809
AA08070810
AA08070811
Alum w/SS Pin
AS08070808
AS08070809
AS08070810
AS08070811
Length
84
Alum w/SS Pin
N/A
N/A
N/A
N/A
N/A
Length
72
Alum w/SS Pin
AS08080808
AS08080809
AS08080810
AS08080811
N/A
N/A
Length
84
Alum w/SS Pin
N/A
N/A
N/A
N/A
N/A
N/A
Length
72
Alum w/SS Pin
N/A
N/A
N/A
N/A
Length
72
Knuckle 1.00
Part Numbers
SS Leaf & Pin
SS08080708
SS08080709
SS08080710
SS08080711
SS08080712
Pin Dia. .250
Steel Leaf & Pin
PS08080708
PS08080709
PS08080710
PS08080711
PS08080712
Alum w/Alum Pin
N/A
N/A
N/A
N/A
N/A
Knuckle 2.00
Part Numbers
SS Leaf & Pin
SS08080808
SS08080809
SS08080810
SS08080811
SS08080812
SS08080813
Pin Dia. .187
Steel Leaf & Pin
PS08080808
PS08080809
PS08080810
PS08080811
PS08080812
PS08080813
Alum w/Alum Pin
AA08080808
AA08080809
AA08080810
AA08080811
N/A
N/A
Knuckle 2.00
Part Numbers
SS Leaf & Pin
SS09070808
SS09070809
SS09070810
SS09070811
SS09070812
SS09070813
Pin Dia. .250
Steel Leaf & Pin
PS09070808
PS09070809
PS09070810
PS09070811
PS09070812
PS09070813
Alum w/Alum Pin
N/A
N/A
N/A
N/A
N/A
N/A
Knuckle 1.00
Part Numbers
SS Leaf & Pin
SS09080708
SS09080709
SS09080710
SS09080711
Steel Leaf & Pin
PS09080708
PS09080709
PS09080710
PS09080711
Alum w/Alum Pin
N/A
N/A
N/A
N/A
800-3-HINGES • FAX 631-737-2933
STAINLESS, STEEL AND ALUMINUM (cont.)
Leaf Thick. .090
Open
Width
2.00
2.50
3.00
4.00
5.00
6.00
Steel Leaf & Pin
PS09080808
PS09080809
PS09080810
PS09080811
PS09080812
PS09080813
Alum w/Alum Pin
N/A
N/A
AA09080810
AA09080811
AA09080812
N/A
SS Leaf & Pin
SS10080808
SS10080809
SS10080810
SS10080811
SS10080812
SS10080813
Steel Leaf & Pin
PS10080808
PS10080809
PS10080810
PS10080811
PS10080812
PS10080813
Length
84
Knuckle 2.00
Alum w/SS Pin
AS10080808
N/A
AS10080810
AS10080811
N/A
N/A
Pin Dia. .375
Length
72
Knuckle 2.00
Part Numbers
SS Leaf & Pin
SS10090808
SS10090809
SS10090810
SS10090811
SS10090812
SS10090813
Steel Leaf & Pin
PS10090808
PS10090809
PS10090810
PS10090811
PS10090812
PS10090813
Alum w/Alum Pin
N/A
N/A
N/A
AA10090811
AA10090812
AA10090813
Alum w/SS Pin
N/A
N/A
N/A
AS10090811*
AS10090812*
AS10090813*
Pin Dia. .500
Length
84
Knuckle 2.00
MORE LENGTHS
Part Numbers
SS Leaf & Pin
SS11100810
SS11100812
Steel Leaf & Pin
PS11100810
PS11100812
Alum w/Alum Pin
N/A
N/A
Leaf Thick. .250
Open
Width
3.00
5.00
Pin Dia. .250
Alum w/Alum Pin
AA10080808
N/A
AA10080810
AA10080811
N/A
N/A
Leaf Thick. .179
Open
Width
3.00
5.00
Alum w/SS Pin
N/A
N/A
AS09080810
AS09080811
AS09080812
N/A
Part Numbers
Leaf Thick. .120
Open
Width
2.00
2.50
3.00
4.00
5.00
6.00
Knuckle 2.00
Part Numbers
SS Leaf & Pin
SS09080808
SS09080809
SS09080810
SS09080811
SS09080812
SS09080813
Leaf Thick. .120
Open
Width
2.00
2.50
3.00
4.00
5.00
6.00
Pin Dia. .250
Alum w/SS Pin
N/A
N/A
Pin Dia. .625
Length
96
Knuckle 1.50
Part Numbers
SS Leaf & Pin
SS12111010
SS12111012
* 96 not available from stock
Steel Leaf & Pin
PS12111010
PS12111012
Alum w/Alum Pin
N/A
N/A
Alum w/SS Pin
N/A
N/A
Length
72
24”, 36”, 48”, 84”
and 96” lengths are
also available — check
www.guden.com for
daily stock updates, or
call us. Custom lengths
are available as well.
Now to complete
Part No. add length:
Ex: PS03030402 - 72
13
CONTINUOUS HINGES
TYPE 316 STAINLESS STEEL
Leaf Thick. .040
Open
Width
1.06
1.25
1.50
2.00
Pin Dia. .091
Part
Numbers
TS05050404
TS05050405
TS05050406
TS05050408
Leaf Thick. .060
Knuckle .50
Open
Width
1.50
2.00
2.50
3.00
Length
72
Pin Dia. .120
Part
Numbers
TS07060406
TS07060408
TS07060409
TS07060410
Knuckle .50
Length
72
STEEL / ELECTROGALVANIZED
Leaf Thick. .042
Open
Width
1.50
2.00
Pin Dia. .091
Part
Numbers
EG05050406
EG05050408
Leaf Thick. .060
Knuckle .50
Open
Width
1.50
2.00
3.00
Length
72
Pin Dia. .120
Part
Numbers
EG07060406
EG07060408
EG07060410
Knuckle .50
Length
72
RAW BRASS
Leaf Thick. .040
Open
Width
1.06
1.25
1.50
2.00
Pin Dia. .091
Part
Numbers
BR05050404
BR05050405
BR05050406
BR05050408
Leaf Thick. .060
Knuckle .50
Open
Width
1.25
1.50
2.00
2.50
3.00
Length
72
Pin Dia. .120
Part
Numbers
BR07060705
BR07060706
BR07060708
BR07060709
BR07060710
Knuckle 1.00
Length
84
POLISHED STAINLESS WITH HOLES — ON 2” CENTERS
Leaf Thick. .040
MORE LENGTHS
24”, 36”, 48”, 84”
and 96” lengths are
also available — check
www.guden.com for
daily stock updates, or
call us. Custom lengths
are available as well.
Now to complete
Part No. add length:
Ex: PS03030402 - 72
14
* These items are normally supplied with pins staked in place.
Open
Width
1.06
1.25
1.50
2.00
Leaf Thick. .060
Open
Width
1.50
2.00
3.00
Pin Dia. .091
Part
Numbers
SP05050404*
SP05050405*
SP05050406*
SP05050408*
Pin Dia. .120
Part
Numbers
SP07060406*
SP07060408*
SP07060410*
Knuckle .50
Hole
Diameter
#5 ctsk
#5 ctsk
#6 ctsk
#6 ctsk
Length
72
Knuckle .50
Hole
Diameter
#6 ctsk
#6 ctsk
#6 ctsk
Length
72
800-3-HINGES • FAX 631-737-2933
PREPLATED STEEL HINGES WITH HOLES — ON 2” CENTERS
Leaf Thick. .040
Open
Width
1.06
1.25
1.50
2.00
Pin Dia. .091
Part Numbers
Steel/Nickel
Steel/Brass
FN05050404*
FB05050404*
FN05050405*
FB05050405*
FN05050406*
FB05050406*
FN05050408*
FB05050408*
Knuckle .50
Hole
Diameter
#4 ctsk
#4 ctsk
#4 ctsk
#6 ctsk
Stock
Length
72
PLASTIC HINGES
Product
Thickness
Open
Color
Width
PLAS10BLACK
PLAS10GRAY
PLAS10WHITE
PLAS15BLACK
PLAS15GRAY
PLAS15WHITE
PLAS20BLACK
PLAS20GRAY
PLAS20WHITE
PLAS30BLACK
PLAS30GRAY
PLAS30WHITE
0.055
0.055
0.055
0.095
0.095
0.095
0.105
0.105
0.105
0.105
0.105
0.105
1.00
1.00
1.00
1.50
1.50
1.50
2.00
2.00
2.00
3.00
3.00
3.00
black
gray
white
black
gray
white
black
gray
white
black
gray
white
PLAS10GRAY
PLAS10BLACK
CONTINUOUS STOP HINGES - OUTSIDE AND INSIDE - PLAIN STEEL**
Part No.
Gauge
Pin
Diameter
Knuckle
Length
Open Width
SH04040204-OUT
.035
.086
.250
1.06
SH04040206-IN
.035
.091
.250
1.50
Operating Arc
Operating
Arc
Outside Stop Hinge
Stop Angle
Angle
Stop
Operating Arc
Operating Arc
and Stop Angle
and Stop Angle
Inside Stop Hinge
** Outside stop hinges normally operate from the 180° or flat, open position, towards the closed position, stopping at 90° ± 3°. Upon request, special stop angles can be furnished ranging from 105° ± 3°, to 60° ± 3°.
Inside stop hinges normally operate from the 0° or closed position towards the open position, stopping at 90° ± 3°. Upon request, special stop angles can be furnished ranging from 57° ± 3°, to 100° ± 3°.
15
BUTT HINGES
SERIES 2000 - TYPE 316 STAINLESS STEEL (No holes, square butts, pin spun on both ends)
Length
2.00
3.00
3.00
4.00
Open Width
2.00
3.00
3.00
4.00
Leaf Thickness
.075
.090
.120
.120
Pin Diameter
.187
.187
.250
.250
Part No.
2000200718
2000300918
2000301225
2000401225
Leaf Thickness
.035
.035
.035
.035
.035
.035
.035
.035
Pin Diameter
.086
.086
.086
.086
.086
.086
.086
.086
Part No.
300007070308
300010100308
300012100308
300015100308
300015150308
300020100308
300020150308
300020200308
Leaf Thickness
.055
.060
.060
.075
.090
Pin Diameter
.120
.120
.120
.187
.250
Part No.
400015150512
400020150612
400020200612
400025250718
400040380925
Pin Diameter
.120
.120
.120
Part No.
500015130512
500020150612
500025150612
Pin Diameter
.120
.120
.187
.120
.187
.250
.120
.187
.250
.250
.187
.250
.250
.250
.500
Part No.
6000150512
6000200612
6000200718
6000250612
6000250718
6000251225
6000300612
6000300718
6000300925
6000301225
6000400718
6000401225
6000501225
6000601225
6000601850
SERIES 3000 - PLAIN STEEL (No holes, cutoffs, staked pin)
Length
.75
1.00
1.25
1.50
1.50
2.00
2.00
2.00
Open Width
.75
1.06
1.06
1.06
1.50
1.06
1.50
2.00
SERIES 4000 - PLAIN STEEL (No holes, pin headed one end only)
Length
1.50
2.00
2.00
2.50
4.00
Open Width
1.50
1.50
2.00
2.50
3.83
SERIES 5000 - PLAIN STEEL (No holes, rectangular butts, pin spun on both ends)
Length
1.50
2.00
2.50
Open Width
1.31
1.50
1.50
Leaf Thickness
.050
.060
.060
SERIES 6000 - PLAIN STEEL (No holes, square butts, pin spun on both ends)
Length
1.50
2.00
2.00
2.50
2.50
2.50
3.00
3.00
3.00
3.00
4.00
4.00
5.00
6.00
6.00
16
Open Width
1.50
2.00
2.00
2.50
2.50
2.50
3.00
3.00
3.00
3.00
4.00
4.00
5.00
6.00
6.00
Leaf Thickness
.050
.060
.078
.060
.078
.120
.060
.078
.090
.120
.078
.120
.120
.120
.187
800-3-HINGES • FAX 631-737-2933
SERIES 7000 - STAINLESS STEEL (No holes, square butts, stainless pin spun on both ends)
Length
1.00
1.50
1.50
2.00
2.00
2.50
2.50
3.00
3.00
3.00
3.00
3.00
4.00
4.00
4.00
5.00
6.00
6.00
Open Width
1.06
1.50
1.50
2.00
2.00
2.50
2.50
3.00
3.00
3.00
3.00
3.00
4.00
4.00
4.00
5.00
6.00
6.00
Leaf Thickness
.035
.035
.050
.060
.078
.060
.078
.060
.078
.090
.090
.120
.078
.120
.120
.120
.120
.165
Pin Diameter
.086
.086
.120
.120
.187
.120
.187
.120
.187
.187
.250
.250
.187
.250
.375
.250
.250
.375
Part No.
7000100308*
7000150308*
7000150512
7000200612
7000200718
7000250612
7000250718
7000300612
7000300718
7000300918
7000300925
7000301225
7000400718
7000401225
7000401237
7000501225
7000601225
7000601637
Pin Diameter
.086
.120
.120
.187
.120
.187
.120
.187
.250
.250
.187
.250
.250
.250
Part No.
8000150308*
8000150512
8000200612
8000200718
8000250612
8000250718
8000300612
8000300718
8000300925
8000301225
8000400718
8000401225
8000501225
8000601225
Pin Diameter
.080
.120
.120
.187
.120
.187
.120
.187
.250
.250
.250
Part No.
9000100408**
9000150512
9000200612
9000200718
9000250612
9000250718
9000300612
9000300718
9000300925
9000301225
9000401225
SERIES 8000 - STAINLESS STEEL (Holes, stainless pin spun on both ends, no finish)
Length
1.50
1.50
2.00
2.00
2.50
2.50
3.00
3.00
3.00
3.00
4.00
4.00
5.00
6.00
Open Width
1.50
1.50
2.00
2.00
2.50
2.50
3.00
3.00
3.00
3.00
4.00
4.00
5.00
6.00
Leaf Thickness
.035
.050
.060
.078
.060
.078
.060
.078
.090
.120
.078
.120
.120
.120
SERIES 9000 - ALUMINUM (No holes, square butts, stainless steel pin spun on both ends)
Length
1.00
1.50
2.00
2.00
2.50
2.50
3.00
3.00
3.00
3.00
4.00
* Cut-off, pin staked in place.
** Cut-off, aluminum pin, staked in place.
Open Width
1.06
1.50
2.00
2.00
2.50
2.50
3.00
3.00
3.00
3.00
4.00
Leaf Thickness
.040
.050
.060
.078
.060
.078
.060
.078
.090
.120
.120
17
WELD-ON HINGES
Weld-On Hinges
are well suited for
flush construction.
The Guden Weld-On Hinge is an attractive new alternative for your hinge needs. It offers continuous,
smooth operation and eliminates the need for unsightly fasteners and leaves.
The Weld-On Hinge is ideal for a wide range of applications, everything from electrical and tool boxes
to machinery doors and air conditioning enclosures.
Weld-On Hinges work
well in over-lapping
construction.
Weld-On Hinges
are well suited in
gate construction.
L2
L1
L1
254 mm
10"
203 mm
8"
153 mm
6"
102 mm
4"
51 mm
2"
0
0
B
B
H
Bushing
Bushing
DD
Fixed Pin
LL
Steel/
steel pin
PSWM015FP
PSWM020FP
PSWM024FP
PSWM028FP
PSWM032FP
PSWM040FP
PSWM048FP
PSWM052FP
PSWM060FP
PSWM070FP
PSWM080FP
PSWM100FP
18
Steel/
brass pin
PBWM015FP
PBWM020FP
PBWM024FP
PBWM028FP
PBWM032FP
PBWM040FP
PBWM048FP
PBWM052FP
PBWM060FP
PBWM070FP
PBWM080FP
PBWM100FP
Steel/steel pin
grease fitting
–
–
–
–
PSWM032FP-GF
PSWM040FP-GF
PSWM048FP-GF
–
PSWM060FP-GF
PSWM070FP-GF
PSWM080FP-GF
PSWM100FP-GF
Steel/brass pin
grease fitting
–
–
–
–
PBWM032FP-GF
PBWM040FP-GF
PBWM048FP-GF
–
PBWM060FP-GF
PBWM070FP-GF
PBWM080FP-GF
–
Removable Pin
Fixed Pin with Grease Fitting
Steel/steel
loose pin
–
PSWM020RP
–
–
PSWM032RP
PSWM040RP
–
–
PSWM060RP
–
PSWM080RP
–
Stainless
SSWM015FP
SSWM020FP
SSWM024FP
SSWM028FP
SSWM032FP
SSWM040FP
SSWM048FP
SSWM052FP
SSWM060FP
–
SSWM080FP
–
Alum./STS pin
ASWM015FP
ASWM020FP
ASWM024FP
ASWM028FP
ASWM032FP
ASWM040FP
–
ASWM052FP
ASWM060FP
ASWM070FP
Note: All dimensions are in decimal inches. For steel hinges, bushing is brass. On stainless steel and aluminum hinges, bushing is stainless steel.
–
Length Thk.
L
H
1.58
0.37
1.97
0.38
2.36
0.46
2.76
0.51
3.15
0.61
3.94
0.77
4.75
0.76
5.32
0.90
5.91
1.00
7.09
1.00
7.87
1.13
10.27
1.46
Dia.
B
0.315
0.315
0.394
0.450
0.510
0.630
0.625
0.709
0.787
0.787
0.906
1.102
L1
0.63
0.79
0.93
1.13
1.29
1.63
2.04
2.25
2.54
3.15
3.44
4.60
L2
0.58
0.58
0.70
0.85
0.85
1.20
1.30
1.50
1.63
1.92
2.05
2.87
Pin Dia.
D
0.197
0.197
0.236
0.236
0.315
0.394
0.394
0.500
0.500
0.510
0.625
0.750
800-3-HINGES • FAX 631-737-2933
A smooth, unbroken cabinet surface is now possible with Guden concealed hinges. The radius of
the moveable leaf swings the door out and clear of the cabinet frame. Two standard sizes are
ready for welded assembly, or can be custom drilled for screw or bolt assembly. Custom sizes are
also available.
No. 9290
CONCEALED HINGES
Part No.
NHAL9290
NHAL9291
NHPS9290
NHPS9291
NHSS9290
NHSS9291
Length
.80
1.25
.80
1.25
.80
1.25
Thickness
.075
.090
.075
.090
.075
.090
Holes
No
No
No
No
No
No
Rib
No
Yes
No
Yes
No
Yes
Leaf
Material
Aluminum
Aluminum
Steel
Steel
Stainless
Stainless
Pin
Material
Stainless
Stainless
Steel
Steel
Stainless
Stainless
No. 9291
D
D
Dual purpose latch hinges make excellent lid or door latches, or easily removable hinges.
The spring-loaded, chamfered pin holds securely, whether used as a latch or hinge. They
are the answer to door removal. “H” prefix parts are supplied with holes.
E
E
FF
BB
C
C
A
A
Latch Hinge – Left hand shown
LATCH HINGES
Part No.
9292LH-02
9292RH-02
9292LH-32
9292RH-32
9293LH-02
9293RH-02
9293LH-32
9293RH-32
9294LH-02
9294RH-02
H9294LH-02 *
H9294RH-02 *
9294LH-32
9294RH-32
H9294LH-32 *
H9294RH-32 *
9295LH-02
9295RH-02
H9295LH-02 *
H9295RH-02 *
9295LH-32
9295RH-32
H9295LH-32 *
H9295RH-32 *
Material
Steel
Steel
Stainless
Stainless
Steel
Steel
Stainless
Stainless
Steel
Steel
Steel
Steel
Stainless
Stainless
Stainless
Stainless
Steel
Steel
Steel
Steel
Stainless
Stainless
Stainless
Stainless
Finish
Zinc
Zinc
None
None
Zinc
Zinc
None
None
Zinc
Zinc
Zinc
Zinc
None
None
None
None
Zinc
Zinc
Zinc
Zinc
None
None
None
None
* Supplied from stock with 3 pre-punched .128 diameter holes.
Thickness
.040
.040
.040
.040
.040
.040
.040
.040
.050
.050
.050
.050
.050
.050
.050
.050
.062
.062
.062
.062
.062
.062
.062
.062
Holes
No
No
No
No
No
No
No
No
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
A
.875
.875
.875
.875
1.38
1.38
1.38
1.38
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.75
2.75
2.75
2.75
2.75
2.75
2.75
2.75
B
.125
.125
.125
.125
.156
.156
.156
.156
.187
.187
.187
.187
.187
.187
.187
.187
.250
.250
.250
.250
.250
.250
.250
.250
C
.500
.500
.500
.500
.750
.750
.750
.750
.875
.875
.875
.875
.875
.875
.875
.875
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
D
.187
.187
.187
.187
.250
.250
.250
.250
.375
.375
.375
.375
.375
.375
.375
.375
.500
.500
.500
.500
.500
.500
.500
.500
E
.250
.250
.250
.250
.375
.375
.375
.375
.500
.500
.500
.500
.500
.500
.500
.500
.750
.750
.750
.750
.750
.750
.750
.750
F
.375
.375
.375
.375
.625
.625
.625
.625
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
19
SPECIALTY HINGES
Our heavy duty latch hinge line is available in standard assembly, and with an optional pin hold back
feature (-HB) to lock pin in the retracted position for easier assembly and quick removal of doors.
HEAVY DUTY LATCH HINGES
Part No.
Material
9296LH-02
Steel
9296LH-02-HB**
Steel
9296LH-32
Stainless
9296LH-32-HB** Stainless
9296RH-02
Steel
9296RH-02-HB**
Steel
9296RH-32
Stainless
9296RH-32-HB** Stainless
9297LH-02
Steel
9297LH-02-HB**
Steel
9297LH-32
Stainless
9297LH-32-HB** Stainless
9297RH-02
Steel
9297RH-02-HB**
Steel
9297RH-32
Stainless
9297RH-32-HB** Stainless
Finish Thickness
Zinc
.125
Zinc
.125
None
.125
None
.125
Zinc
.125
Zinc
.125
None
.125
None
.125
Zinc
.187
Zinc
.187
None
.187
None
.187
Zinc
.187
Zinc
.187
None
.187
None
.187
A
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
B
.375
.375
.375
.375
.375
.375
.375
.375
.50
.50
.50
.50
.50
.50
.50
.50
C
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.12
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
D
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.25
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
D
No. 9296LH-02-HB Latch Hinge shown
B
C
A
D
E
B
C
Doors come right off with Guden’s un-hinge. It is a quick-release hinge that can be mounted in any
position and requires no tools. An easy squeeze of the knurled knobs retracts the spring-loaded pins
from the knuckles to release the leaves. Precise manufacturing standards eliminate excess side and
end play for minimum door movement.
A
No. 9201-32 Un-Hinge shown
A
UN-HINGES - STAINLESS STEEL
Part No.
Thickness
9201-32
.050
H9201-32 *
.050
9202-32
.050
H9202-32 *
.050
9300LH-32
.050
H9300LH-32 *
.050
9300RH-32
.050
H9300RH-32 *
.050
A
4.00
4.00
4.00
4.00
1.75
1.75
1.75
1.75
C
B
.250
.250
N/A
N/A
.250
.250
.250
.250
C
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
D
.41
.41
N/A
N/A
.53
.53
.53
.53
E
.37
.37
.37
.37
.50
.50
.50
.50
Holes
No
Yes
No
Yes
No
Yes
No
Yes
No. 9202-32 Un-Hinge shown
E
E
D
B
C
Left hand No. 9300LH-32 shown
Right hand No. 9300RH-32
A
20
* Supplied from stock with 3 pre-punched .128 diameter holes.
** Supplied with pin hold back feature.
800-3-HINGES • FAX 631-737-2933
D
UN-HINGES - STAINLESS STEEL (cont.)
Part No.
Thickness
9401LH-32
.050
H9401LH-32*
.050
9401RH-32
.050
H9401RH-32*
.050
9402LH-32
.050
H9402LH-32*
.050
9402RH-32
.050
H9402RH-32*
.050
9298RV-32
.180
A
1.75
1.75
1.75
1.75
1.75
1.75
1.75
1.75
2.89
B
.250
.250
.250
.250
N/A
N/A
N/A
N/A
.50
C
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
D
.41
.41
.41
.41
N/A
N/A
N/A
N/A
1.25
E
.37
.37
.37
.37
.37
.37
.37
.37
1.312
Holes
No
Yes
No
Yes
No
Yes
No
Yes
Yes
C
B
A
No. 9298RV-32 Un-Hinge shown
E
D
A
B
C
C
UN-HINGES - STEEL ZINC PLATED
Part No.
Thickness
9401LH-02
.050
H9401LH-02*
.050
9401RH-02
.050
H9401RH-02*
.050
9402LH-02
.050
H9402LH-02*
.050
9402RH-02
.050
H9402RH-02*
.050
9403LH-02**
H9403LH-02**
9403RH-02**
H9403RH-02**
9403BP-02***
.090
.090
.090
.090
.060
A
1.75
B
.250
C
1.00
D
.41
E
.37
1.75
.250
1.00
.41
.37
Yes
1.75
.250
1.00
.41
.37
No
1.75
.250
1.00
.41
.37
Yes
1.75
N/A
1.00
N/A
N/A
N/A
N/A
.37
No
1.75
N/A
1.00
1.75
N/A
1.00
1.75
3.50
3.50
3.50
3.50
3.50
N/A
.365
.365
.365
.365
N/A
1.00
1.00
1.00
1.00
1.00
.75
1.125
1.125
1.125
1.125
N/A
A
Holes
No
.37
Yes
.37
No
.37
1.50
1.50
1.50
1.50
N/A
Yes
No
Yes
No
Yes
Yes
E
No. 9401RH-02 Un-Hinge shown
No. 9402RH-02 Un-Hinge shown
D
C
B
A
No. 9403RH-02 Un-Hinge shown
For sizing and mounting information, please see our website at www.guden.com and look
for our invisible hinge calculator in the invisible hinge section.
INVISIBLE HINGES
Part No.
114
205
314
No. 205 shown
Length
1.50
2.375
1.50
* Supplied from stock with 2 pre-punched .128 diameter holes.
** Supplied with black vinyl pin handle cap.
*** Mounting backplate
Finish
04, 26D
04, 26D
04, 26D
21
SPECIALTY HINGES
Quick, easy and economical door removals are the benefits of Guden slip joint hinges.
Custom sizes, constructions and hole patterns are also available.
SLIP JOINT HINGES – NO HOLES
No. 801
Right hand shown
Leaf Thick. .050
Open Width*
1.44
Female
Male
Pin Dia. .120
SS Leaf & Pin
NHSS801LF
NHSS801LM
NHSS801RF
NHSS801RM
Leaf Thick. .080
Open Width*
1.68
No. 801
Left hand shown
Leaf Thick. .072
Male
Leaf Thick. .080
Series No. 802 &
No. 806
Right hand shown
Female
Pin Dia. .125
Series No. 802 &
No. 806
Left hand shown
Leaf Thick. .093
Open Width*
2.00
22
* Open width when assembled.
Female
Leaf Thick. .075
Length
2.00
Pin Dia. .187
Leaf Thick. .093
Length
2.50
Pin Dia. .187
Open Width* Steel Leaf & Pin
2.50
NHPS80625LF
NHPS80625LM
NHPS80625RF
NHPS80625RM
Length
2.50
Pin Dia. .250
SS Leaf & Pin
NHSS80630LF
NHSS80630LM
NHSS80630RF
NHSS80630RM
Pin Dia. .187
SS Leaf & Pin
NHSS80230LF
NHSS80230LM
NHSS80230RF
NHSS80230RM
Length
1.50
Open Width* Steel Leaf & Pin
1.87
NHPS80225LF
NHPS80225LM
NHPS80225RF
NHPS80225RM
Length
2.00
Leaf Thick. .093
3.00
Alum w/SS Pin
NHAL80220LF
NHAL80220LM
NHAL80220RF
NHAL80220RM
Length
2.00
Pin Dia. .187
Open Width*
Male
SS Leaf & Pin
NHSS80220LF
NHSS80220LM
NHSS80220RF
NHSS80220RM
Open Width* Steel Leaf & Pin
2.00
NHPS80620LF
NHPS80620LM
NHPS80620RF
NHPS80620RM
Male
Alum w/SS Pin
NHAL801LF
NHAL801LM
NHAL801RF
NHAL801RM
Pin Dia. .187
Open Width* Steel Leaf & Pin
1.68
NHPS80220LF
NHPS80220LM
NHPS80220RF
NHPS80220RM
Female
Steel Leaf & Pin
NHPS801LF
NHPS801LM
NHPS801RF
NHPS801RM
Steel Leaf & Pin
NHPS80630LF
NHPS80630LM
NHPS80630RF
NHPS80630RM
Leaf Thick. .075
Length
3.00
Open Width*
2.50
Length
3.00
Pin Dia. .187
SS Leaf & Pin
NHSS80625LF
NHSS80625LM
NHSS80625RF
NHSS80625RM
Length
2.50
800-3-HINGES • FAX 631-737-2933
SLIP JOINT HINGES – WITH HOLES
Leaf Thick. .050
Open Width*
1.44
Pin Dia. .120
SS Leaf & Pin
WHSS801LF
WHSS801LM
WHSS801RF
WHSS801RM
Leaf Thick. .080
Open Width*
1.68
Leaf Thick. .072
SS Leaf & Pin
WHSS80220LF
WHSS80220LM
WHSS80220RF
WHSS80220RM
Pin Dia. .125
Open Width* Steel Leaf & Pin
2.00
WHPS80620LF
WHPS80620LM
WHPS80620RF
WHPS80620RM
Open Width*
2.00
Leaf Thick. .075
No. 801
Right hand shown
Length
2.00
Length
2.50
Open Width* Steel Leaf & Pin
2.50
WHPS80625LF
WHPS80625LM
WHPS80625RF
WHPS80625RM
Steel Leaf & Pin
WHPS80630LF
WHPS80630LM
WHPS80630RF
WHPS80630RM
Leaf Thick. .075
Open Width*
3.00
Male
Female
No. 801
Left hand shown
Length
2.50
Series No. 802 &
No. 806
Right hand shown
SS Leaf & Pin
WHSS80630LF
WHSS80630LM
WHSS80630RF
WHSS80630RM
Leaf Thick. .093
Male
Pin Dia. .187
Pin Dia. .250
Length
3.00
Female
Pin Dia. .187
Leaf Thick. .093
Pin Dia. .187
SS Leaf & Pin
WHSS80230LF
WHSS80230LM
WHSS80230RF
WHSS80230RM
Length
1.50
Open Width* Steel Leaf & Pin
1.87
WHPS80225LF
WHPS80225LM
WHPS80225RF
WHPS80225RM
Length
2.00
Leaf Thick. .093
Leaf Thick. .093
Alum w/SS Pin
WHAL80220LF
WHAL80220LM
WHAL80220RF
WHAL80220RM
Length
2.00
Pin Dia. .187
Open Width*
3.00
Alum w/SS Pin
WHAL801LF
WHAL801LM
WHAL801RF
WHAL801RM
Pin Dia. .187
Open Width* Steel Leaf & Pin
1.68
WHPS80220LF
WHPS80220LM
WHPS80220RF
WHPS80220RM
Leaf Thick. .080
Steel Leaf & Pin
WHNP801LF**
WHNP801LM**
WHNP801RF**
WHNP801RM**
Open Width*
2.50
Length
3.00
Female
Male
Male
Female
Pin Dia. .187
SS Leaf & Pin
WHSS80625LF
WHSS80625LM
WHSS80625RF
WHSS80625RM
Length
2.50
Series No. 802 &
No. 806
Left hand shown
Pin Dia. .250
SS Leaf & Pin
9299LH-32***
Please go to www.guden.com for individual drawings with sizes and hole placements.
* Open width when assembled.
** Nickel plated Pin.
*** Motor box hinge, stainless electropolished with 3 ctsk holes each leaf.
Length
3.00
23
SPECIALTY HINGES
PLAIN STEEL FLAG HINGES
Female
Male
No. 1474
Left hand shown
Part No.
NHPS836*
NHPS1474LF
NHPS1474LM
NHPS1474RF
NHPS1474RM
Assembled Length
2.00
2.37
2.37
2.37
2.37
Leaf Width
.68
1.20
1.20
1.20
1.20
Leaf Thickness
.050
.060
.060
.060
.060
Pin Diameter
.130
.156
.156
.156
.156
Leaf Width
1.00
1.00
1.00
Leaf Thickness
.050
.050
.050
Pin Diameter
.120
.120
.120
STAINLESS STEEL FLAG HINGES
Part No.
NHSS1485F**
NHSS1485LM
NHSS1485RM
No. 836
Reversible
Assembled Length
2.00
2.00
2.00
No. NHSS1485RM
Right Hand shown
Continuous slip joint hinges. 18 inch and 24 inch lengths in the LH (left hand) version from stock in
Type 1010 steel, no finish. Type 304 stainless steel as well as custom lengths, holes and finishes are
available on special order.
CONTINUOUS SLIP JOINT HINGES
Part No.
NHPS818LH
NHPS824LH
Length
18.00
24.00
Open
Width
2.00
2.00
Leaf
Thickness
.060
.060
Pin
Diameter
.120
.120
Leaf
Material
Steel
Steel
Pin
Material
Steel
Steel
No. IH27575-26D
INSTITUTIONAL HINGES
Item
IH27575-1B
IH27575-26D
IH28175-1B
IH28175-26D
IH28181-1B
IH28181-26D
24
* Sold as a male/female set.
** Female is reversible for LM or RM.
Thickness
.095
.095
.095
.095
.095
.095
Pin
.250
.250
.250
.250
.250
.250
Door Thick/
Frame Offset
.75 / .75
.75 / .75
.81 / .75
.81 / .75
.81 / .81
.81 / .81
Material
Plain Steel
Plain Steel
Plain Steel
Plain Steel
Plain Steel
Plain Steel
Finish
Black Powder Coat
Dull Chrome
Black Powder Coat
Dull Chrome
Black Powder Coat
Dull Chrome
800-3-HINGES • FAX 631-737-2933
STAINLESS STRAP / T- HINGES
Item
STRP0315RVA1
STRP0315RVA2
STRP0472RVA1
STRP0472RVA2
STRP0787RVA1
STRP0787RVA2
STRP0315RVB1
STRP0472RVB1
STRP0472LHB1
STRP0472RHB1
Length
3.15
3.15
4.72
4.72
7.87
7.87
3.15
4.72
4.72
4.72
Material
Polished Stainless
Polished Stainless
Polished Stainless
Polished Stainless
Polished Stainless
Polished Stainless
Polished Stainless
Polished Stainless
Polished Stainless
Polished Stainless
Description
flat, reversible w/ round holes
flat, reversible w/ square holes
flat, reversible w/ round holes
flat, reversible w/ square holes
flat, reversible w/ round holes
flat, reversible w/ square holes
reversible, high profile style w/ ctsk holes
reversible, high profile style w/ ctsk holes
LH, high profile style w/ ctsk holes
RH, high profile style w/ ctsk holes
No. STRP0315RVA1
No. STRP0472RHB1
BIFOLD SCREEN DOOR HINGES—BRASS PLATED
Item
BIFOLD551-075
BIFOLD551-100
BIFOLD551-125
Length
1.75
2.00
2.00
Thickness
.048
.058
.058
Panel Thickness
.75 - 1.00
1.00 - 1.125
1.125 - 1.25
No. BIFOLD551-075
No. 1645 / No. 1646 Cover Hinge
COVER HINGES
Part No.
1645-02
1646-02
Length
1.562
1.562
Width
2.00
2.50
Thickness
.050
.050
Pin
.115
.115
Material
Steel
Steel
Finish
Zinc
Zinc
Holes
2
2
343 Series Cabinet Hinge
CABINET SPRING HINGES
Part No.
343-1-14
343-1-03
Open
Width
1.61
1.61
Length
1.11
1.11
Thickness
.050
.050
Pin
.120
.120
Material
Steel
Steel
Normal
Finish
Nickel
Brass
Normal
Loading
Open
Open
Holes
4
4
25
SPECIALTY HINGES
Hold doors open or closed with Guden spring hinges. Butts are carried in stock for either surface or concealed mounting in several sizes, materials and finishes.
Custom continuous and butt spring hinges are made to your individual specifications. For more detailed information about dimensions and torques, see our
accompanying Spring Hinge Design Form.
SPRING HINGES - NO HOLES
Part No.
NHPS1114
NHSTS1114
NHPS1115
NHSTS1115
NHPS1116
NHSTS1116
NHPS1117
NHSTS1117
NHPS1120
NHSTS1120
NHPS1121
NHSTS1121
NHPS1122
NHSTS1122
NHPS1123
NHSTS1123
Length
1.25
1.25
1.25
1.25
1.75
1.75
2.18
2.18
3.50
3.50
3.50
3.50
5.00
5.00
5.00
5.00
Open
Width
.75
.75
.75
.75
1.50
1.50
1.25
1.25
1.50
1.50
1.50
1.50
2.00
2.00
2.00
2.00
Thickness
.025
.025
.025
.025
.035
.035
.050
.050
.040
.040
.040
.040
.050
.050
.050
.050
Pin
.062
.062
.062
.062
.086
.086
.115
.115
.091
.091
.091
.091
.120
.120
.120
.120
Material
Steel
Stainless
Steel
Stainless
Steel
Stainless
Steel
Stainless
Steel
Stainless
Steel
Stainless
Steel
Stainless
Steel
Stainless
Pin
.062
.062
.086
.082
.115
.115
.091
.091
.091
.091
.091
.091
.091
.091
.091
.120
.120
.120
.120
Material
Steel
Stainless
Steel
Stainless
Steel
Stainless
Steel †
Steel †
Stainless**
Stainless*
Stainless**
Steel
Stainless
Steel
Stainless
Steel
Stainless
Steel
Stainless
Finish
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Normal
Loading
Open
Open
Closed
Closed
Open
Open
Open
Open
Open
Open
Close
Close
Open
Open
Close
Close
Spring loaded to open shown;
for spring loaded to close versions, spring legs are
on the opposite side of the leaves
SPRING HINGES—WITH HOLES
Part No.
1114-02
STS1114
1116-02
STS1116
1117-02
STS1117
1643-02
1644-02
STS1644035
STS1643025
STS1643035
PS1120-02
STS1120
PS1121-02
STS1121
PS1122-02
STS1122
PS1123-02
STS1123
26
Length
1.25
1.25
1.75
1.75
2.18
2.18
2.00
2.00
2.00
2.00
2.00
3.50
3.50
3.50
3.50
5.00
5.00
5.00
5.00
* .025 spring wire diameter.
** .035 spring wire diameter.
Open
Width
.75
.75
1.50
1.50
1.25
1.25
1.00
1.00
1.00
1.00
1.00
1.50
1.50
1.50
1.50
2.00
2.00
2.00
2.00
Thickness
.025
.025
.035
.035
.050
.050
.040
.040
.035
.035
.035
.040
.040
.040
.040
.050
.050
.050
.050
Finish
Zinc
None
Zinc
None
Zinc
None
Zinc
Zinc
None
None
None
Zinc
None
Zinc
None
Zinc
None
Zinc
None
Normal
Loading
Open
Open
Open
Open
Open
Open
Open
Closed
Closed
Open
Open
Open
Open
Close
Close
Open
Open
Close
Close
† Supplied with brass pin.