Rear End Components - Vanishing Point Race Cars

Rear End Components - Vanishing Point Race Cars

Rear End
Components
11” MaRK WIllIaMS ModUlaR ReaRS
Finally Pro Mod and Nitro Coupe racers have an option when it comes to rear end assemblies. Trying to build a 9” Ford to handle
these cars is now a thing of the past. The new 11” Pro 4-link rear from Mark Williams represents the ultimate assembly for high
horsepower 4-link and swing arm drag race cars such as Pro Mods and Nitro Coupes. at
the heart is a rugged center module that is cast from the same tough aircraft alloy used in
all MW cast aluminum components. It also incorporates the thru bolt design carried over
from the MW 9” Ford aluminum cases. The bolt pattern on the mounting faces on both
sides of the center is the same as MW’s highly successful 9” modular rear. This means
with slight modification all the existing MW modular hardware such as 4-link brackets,
lower tie bar, end bells and floater assembly will bolt directly to this new 11” assembly,
simplifying a change over from a MW 9” modular. The gear set which features an 11” ring
gear and 40 spline pinion shaft are produced exclusively for MW by Richmond Gear with
MW90775
most popular ratios currently available.
Using a Mark Williams Rear?
Throughout our Rear Suspension Components
section, you’ll notice that we’ve structured
some of our kits to work with the Mark Williams
aluminum rear ends. If you’re using a Mark
Williams aluminum rear end, request the part
numbers that end in “MWK”.
MW90020
MW90770
MW90775
MW90775/lF
11” Modular Center Section .... $8,797.95
11” Modular Floater Rear w/ Steel Brakes .... $14,105.95
11” Modular Floater Rear w/ Carbon Brakes .... $17,290.00
11” Modular Floater Rear w/ Carbon Brakes .... $12,959.00
9” MaRK WIllIaMS ModUlaR ReaRS
The MW Modular 9” Pro 4-link housing is the ultimate for the
suspended rear race car. all 4-link brackets are CNC-machined from
7075 billet aircraft alloy aluminum. The layout of the 4-link attachment
points is the same as used by the leading Pro Stock chassis builders
with the 4-link tubes on 20” centers. Units are available in both floater
and flange type axle configurations. Unique design features include
indexing lugs on each 4-link bracket that positively lock inner and
outer brackets to each other and to the housing. This insures perfect
alignment of all components and eliminates the possibility of housing
and third member shifting between the brackets. To further strengthen
the assembly, an aluminum cross tie bar is used to secure the 4-link
brackets to the bottom of the housing. The housing also has
provisions for either upper or lower wishbone attachment along with
shock and wheelie bar mounts. Holes in the 4-link brackets
accommodate rod ends with 5/8” cross holes. Standard housing has a
37” wheel to wheel width and 20” 4-link centers. others are available
at an extra charge.
MW97000
MW97050
MW99700
MW99700-C
MW99050
MW99050-3rd
MW99750
9” Modular Flange Rear w/ Steel Brakes .... $6,797.00
9” Modular Flange Rear w/ Carbon Brakes .... $8,901.00
9” Modular Floater Rear w/ Steel Brakes .... $8,422.35
9” Modular Floater Rear w/ Third Member Upgrades .... $9,054.64
9” Modular Floater Rear w/ Carbon Brakes .... $10,358.00
9” Modular Floater Rear w/ Carbon Brakes less 3rd Member .... $9,289.11
9” Gen II Modular Floater Rear w/ Carbon Brakes .... $10,690.67
Geese & Carey enterprises llC
dBa Vanishing Point Race Cars
32201 Queen anne Hwy
Queen anne, Md 21657 USa
April, 2016. Prices are subject to change without notice.
14
MW97000
Phone
Fax
email
Web
(410) 364-5072
(410) 364-5075
[email protected]
www.vp-racecars.com
Rear End
Components
ReaR PaRTS
MW3100-255
MW55008-40-36
MW55010
MW55021
MW55066
MW55069
MW55070
MW57448-95S
MW57638
MW57680
MW90015
MW90121-a
MW90127
MW90100
MW90305
MW90337
MW91100
MW91100-9
MW91110
MW93061
PB-6013CB2RS
PB-6014CB2RS
Snap Ring for 11” Floater Hub .... $3.40
Shaft, Floater PR 34-36" w/ 2 Spiral-lox Ring
for 40 Spline .... $495.00
outer Floater Bearing .... $69.50
MW Caliper Mount Floater Rear .... $40.00
Floater Hub 5 on 5 Steel Rotor .... $551.00
Carbon Brake Floater Hub 5-1/2” b/c .... $551.00
Inner Floater Bearing .... $108.89
Case, alum 9.5” Ford w/ Steel Caps 3.812 .... $725.00
MW 11” Rear Shim Kit .... $35.00
MW 9” large Pinion Support w/ Bearings .... $280.00
o-Ring for 11” Rear Cover .... $9.83
MW Rear Bell .... $525.00
Seal, end Bell Modular Housing .... $9.80
MW 9” aluminum Center Housing w/ Studs .... $874.88
Bracket, Caliper Floater Series 2, 70mm .... $66.00
long Floater Spindle Gen II .... $576.13
lube Pump assembly for MW Rears .... $635.00
lube Pump assembly for MW 9” Rears .... $750.06
MW Modify Pinion for 3/8 Hex Pump drive 9” Rear .... $134.15
Floater Wheel Stud .... $11.90
Ceramic Floater Bearings Inner Bearing .... $194.64
Ceramic Floater Hub outer Bearing .... $258.60
HoUSING eNdS
44-01
44-02
44-03
44-04
MW58595
MW58598
MW58515
MW58572
MW58570
Big Ford Housing ends, pair .... $70.00
Small Ford Housing ends, pair .... $70.00
olds Housing ends, pair .... $70.00
Mopar Housing ends, pair .... $70.00
Pro Mod Housing ends w/ Seal, pair .... $232.00
Pro Mod Housing ends w/o Seal, pair .... $208.00
Pro Mod Housing end Seal .... $13.56
Stud Kit for Pro Mod Housing ends .... $51.00
3/8” Studs for Housing ends (will not
fit Mopar 5-bolt housing ends) .... $33.42
44-01
44-02
44-03
MW58595
Geese & Carey enterprises llC
dBa Vanishing Point Race Cars
32201 Queen anne Hwy
Queen anne, Md 21657 USa
April, 2016. Prices are subject to change without notice.
15
44-04
MW58598
Phone
Fax
email
Web
(410) 364-5072
(410) 364-5075
[email protected]
www.vp-racecars.com
Rear End
Components
SPoolS
We stock and sell Strange and Moser spools in any spline you need. These
lightweight, forged steel units will hold up to the abuse race cars put out.
46-01
46-02
46-03
46-05
46-06
46-04
46-11
46-12
46-07
46-08
46-10
46-15
46-16
46-19
46-09
Strange dana 60 40 Spline Spool, 4:56 - 7:17 ratio .... $279.50
Strange dana 60 35 Spline Spool, 3:54, 3:73 & 4:10 ratio .... $219.00
Strange dana 60 35 Spline Spool, 4:56 - 7:17 ratio .... $219.00
Strange ‘57-’64 olds 35 Spline Spool .... $219.00
Strange 12-Bolt 30 Spline Spool .... $189.50
Strange 12-Bolt 33 Spline Spool .... $189.50
Strange 8-3/4” Mopar 30 Spline Spool .... $189.50
Strange 8-3/4” Mopar 35 Spline Spool .... $189.50
Strange 9” 31 Spline Spool .... $189.50
Strange 9” 33 Spline Spool .... $189.50
Strange 9” 35 Spline Spool .... $189.50
Strange 9” 35 Spline aluminum Spool .... $398.04
Strange 9” 40 Spline Spool .... $279.50
Strange 9” Ford 40 Spline Spool, 2.25” bearing .... $279.50
Moser 9” 33 Spline Spool .... $200.00
MaRK WIllIaMS 5/8” WHeel STUd KITS
MW51540
MW51580
MW51500
MW51590
MW51560
When choosing
wheel studs,
make sure you
order using
correct shank
length.
7/8” shoulder, 7/8” threads .... $125.00
1-3/16” shoulder, 7/8” threads .... $125.00
1-1/2” shoulder, 1-3/16” threads .... $125.00
1-3/4” shoulder, 7/8” threads .... $125.00
2” shoulder, 1-3/16” threads .... $125.00
SPool BeaRINGS
49-01
49-02
49-03
49-04
49-05
49-06
dana 60 Spool Bearings, pr .... $79.00
9” Ford 3.25 Case Spool Bearings, pr .... $36.00
9” Ford 3.062 Case Spool Bearings, pr .... $36.00
9” Ford 2.891 Case Spool Bearings, pr .... $36.00
‘57-’64 olds & 8-3/4” Mopar Spool Bearings, pr .... $36.00
12 Bolt Chevy Spool Bearings, pr .... $36.00
axle BeaRINGS
48-08
48-05
48-06
48-04
48-07
MW58508
axle Bearings 2.834” x 1.562”, pr .... $75.34
axle Bearings 3.150” x 1.531”, pr .... $75.34
axle Bearings 3.150” x 1.562”, pr .... $75.34
axle Bearings 3.150” x 1.771”, pr .... $75.34
axle Bearings Mopar, pr .... $75.34
double Row axle Bearings, pr .... $285.18
Geese & Carey enterprises llC
dBa Vanishing Point Race Cars
32201 Queen anne Hwy
Queen anne, Md 21657 USa
April, 2016. Prices are subject to change without notice.
16
Phone
Fax
email
Web
(410) 364-5072
(410) 364-5075
[email protected]
www.vp-racecars.com
Rear End
Components
ReaR HoUSINGS
all phases of rear end housings available. Services include narrowing your housing, supplying a custom narrowed back brace and
bracketed housing all the way up to 4130 fabricated full floater Pro Mod housing. VPRC has the strongest and best quality on all rear end
housings we produce!
43-003a
43-003aK
43-003BK
MS Fab 9” Rear Housing 44” Wide - BlaNK .... $695.00
MS Fab 9” Rear Housing Fully Braced & Bracketed w/ adjustable Shock Mount and Choice of end .... $2,271.25
MS Fab 9” Rear Housing Fully Braced & Bracketed w/ Choice of ends .... $2,271.25
43-09a
43-09aK
43-09BK
Pro 9” Rear Housing 44” Wide - BlaNK .... $690.27
Pro 9” Rear Housing Fully Braced & Bracketed w/ adjustable Shock Mount and Choice of ends .... $1,926.25
Pro 9” Rear Housing Fully Braced & Bracketed w/ Choice of ends .... $1,897.50
43-15a
43-15aU
43-15Ba
43-15BaU
43-15aK
43-15BK
43-15MWBFK1
43-15UMWBFK1
43-15STBFK1
43-15USTBFK1
43-06K
43-07K
43-08K
43-11K
43-10K
P2362
CM Fab 9” Rear Housing 44” Wide, 3-1/4” Tube - BlaNK .... $895.00
CM Fab 9” Rear Housing 44” Wide, 3-1/4” Tube - UNWelded BlaNK .... $520.00
CM Fab 9” Rear Housing 44” Wide, 3-1/2” Tube - BlaNK .... $950.00
CM Fab 9” Rear Housing 44” Wide, 3-1/2” Tube - UNWelded BlaNK .... $575.00
CM Fab 9” Rear Housing Fully Braced & Bracketed w/ adjustable Shock Mount and Choice of ends .... $3,047.50
CM Fab 9” Rear Housing Fully Braced & Bracketed w/ Choice of ends .... $3.047.50
CM Fab 9” Rear Housing Fully Bracketed & Braced w/ Mark Williams Floater Spindles .... $4,542.50
CM Fab 9” Rear Housing Fully Bracketed & Braced w/ Mark Williams Floater Spindles, Unwelded .... $1,868.75
CM Fab 9” Rear Housing Fully Bracketed & Braced w/ Strange Floater Spindles .... $4,197.50
CM Fab 9” Rear Housing Fully Bracketed & Braced w/ Strange Floater Spindles, Unwelded .... $1,753.75
oeM dana 60 Housing Narrowed w/ Choice of ends .... $488.75
oeM Mopar 8-3/4” Housing Narrowed w/ Choice of ends .... $488.75
oeM 9” Housing Narrowed w/ Choice of ends .... $488.75
oeM 8-3/4” Back Brace .... $172.50
oeM 9” Back Brace .... $143.75
1/8” NPT Breather Plug .... $6.40
“ BLANK ”
43-15BK (Shown Powder Coated)
43-003a
43-15a
all VPRC 4130 fabricated housings are
constructed to the utmost tolerances.
Jig aligned and heli-arc welded using.250 thick 4130 face
plate, 1/8” thick formed shell, 1/4” thick internal bracing
and a fabricated deep design back brace.
This housing is second to none in superior strength
and quality. Complete with large VPRC logo filler and
3/4” drain and vent cap and stud kit all included.
Buy a “BlaNK” or completely bracketed out 4130-fabricated
VPRC Housing and you will then have the best there is.
Geese & Carey enterprises llC
dBa Vanishing Point Race Cars
32201 Queen anne Hwy
Queen anne, Md 21657 USa
April, 2016. Prices are subject to change without notice.
17
Phone
Fax
email
Web
(410) 364-5072
(410) 364-5075
[email protected]
www.vp-racecars.com
Rear End
Components
CoMPleTe 9” FoRd ReaR
This is a race-ready rear, packaged together for ease of buying a rear.
Complete 9” narrowed housing with new tubes and housing ends. Strange 35
spline axles, 5/8” wheel studs, Wilwood brakes, Strange spool, Strange case
with aluminum pin support, 1350 pinion yoke, Richmond ring and pinion, all
new bearings throughout and assembled by VPRC.
51-01
9” Ford Rear Complete w/ Strange axles, third
member, brakes, bearings and studs .... $2,895.00
Complete 9” Ford Rear
(Shown with optional brackets)
CoMPleTe daNa 60 ReaR
The dana 60 is a race-ready narrowed rear, fully assembled with Strange axles,
Strange spool, Richmond ring and pinion, Strange caps with bolts, new bearings
throughout, 5/8” wheel studs and new housing ends.
51-02
dana 60 Complete Rear end assembly w/ Strange axles,
spool, R&P set up, bearings and studs .... $1,595.00
THIRd MeMBeR PaRTS
1111-52
1200-48
23-10
23-11
23-20
23-21
23-22
23-23
23-24
Toms-01
Toms-02
Toms-03
Toms-04
Toms-3rd
9” Ford Gasket .... $12.10
9” Center Studs, 10 pieces .... $20.00
Nodular Case w/ Steel Caps & adjusters, 3.250” bore .... $329.00
Strange aluminum Case w/ Caps & adjusters, 3.250” bore .... $379.50
Strange aluminum Pinion Support less bearings, shims, seals .... $120.05
Strange Pinion assembly Kit for large Pinion .... $45.50
Strange Pinion assembly Kit for Stock Pinion .... $49.50
9” Standard Pinion Nut .... $6.05
9” Pro Pinion Nut .... $6.05
Set Up Kit, spool bearing, pinion bearing, spacer, seal, ring gear bolts .... $245.67
9-1/2” Ring Gear Pinion Support .... $316.25
456 large Stem Ring and Pinion .... $425.00
9-1/2” Ring and Pinion in 3:40 Ratio .... $610.31
Pro Mod Third (not assembled) w/ choice of Ring and Pinion .... $4,233.13
23-10
23-11
23-22
23-21
Geese & Carey enterprises llC
dBa Vanishing Point Race Cars
32201 Queen anne Hwy
Queen anne, Md 21657 USa
April, 2016. Prices are subject to change without notice.
18
23-20
Phone
Fax
email
Web
(410) 364-5072
(410) 364-5075
[email protected]
www.vp-racecars.com
Rear End
Components
MaRK WIllIaMS THIRd MeMBeRS
MW57007
MW57008
MW57009
MW57011
MW57014
MW57019
MW57021
MW57022
e.T. Bracket Nodular Iron Case 3.062 bore, standard spool - 28, 31, 35 or 40 spline,
stock Ford pinion yoke, tapered support, 3.00 to 6.50 Richmond 8620 gear, 72 lbs .... $1,687.00
Super Class eT Bracket aluminum thru Bolt Case 3.250 bore, lightweight steel spool,
MW 35 spline 1350 series pinion yoke, ball bearing support, 3.89 to 4.86 Richmond
large pinion pro gear, 58 lbs .... $2,105.00
Pro Stock aluminum thru Bolt Case 3.812 bore, 40 spline aluminum
spool, MW 35 spline 1350 series pinion yoke, ball bearing support, 3.89
to 4.86 Richmond large pinion pro gear .... $2,275.00
Pro Mod aluminum thru Bolt Case 3.812 bore, 40 spline lightweight steel spool,
MW 35 spline 1350 series pinion yoke, ball bearing support, 3.20 to 4.86 Richmond
large pinion pro gear, 62 lbs .... $2,250.00
Pro Stock 9-1/2' aluminum thru Bolt Case 3.812 bore, 40 spline aluminum spool,
MW 1350 series pinion yoke, ball bearing support, 4.10 to 5.22 ratio Richmond 9-1/2' Pro Gear .... $2,330.00
Pro Stock aluminum thru Bolt Case 3.812 bore, 40 spline aluminum spool, MW 28 spline
1350 series pinion yoke, ball bearing support, 4.86 to 6.50 Richmond standard pinion pro gear .... $2,775.00
Pro Mod aluminum thru Bolt Case 3.812 bore, 40 spline steel spool, MW 35 spline 1350 series
pinion yoke, ball bearing support, 4.10 to 4.86 Richmond large pinion 9-1/2" pro gear, 68 lbs .... $2,417.00
low Friction 9-1/2” Third Member 5.00 thru 5.50 ratio, Sub-Zero, Supra-Fin treated 9-1/2” gears, specify ratio .... $4,275.00
STRaNGe THIRd MeMBeRS
STGPRF115
STGPRF165
STGPRF205
STGPRF215
STGPRF225
STGPRFoP1
STGPRFoP21
STGPRFoP23
STGPRFoP25
STGPRFoP3
STGPRFoP5
STGRP07995
STGGM12Bolt
9” Pro Iron Center Section fully assembled with lightweight 31-35 spline spool, forged aluminum support,
4.86 to 6.50 Strange small stem pro 9310 gear set and CM yoke .... $1,309.00
9” lightweight aluminum Center Section fully assembled with lightweight 31-35 spline spool, forged aluminum
support, 4.86 to 6.50 Strange small stem pro 9310 gear set and CM yoke .... $1,382.70
Strange 3.250 bore aluminum Ultracase fully assembled with lightweight 35 spline spool, billet aluminum pinion
support, 4.86 to 6.50 Strange small stem pro 9310 gear set and CM yoke .... $1,593.90
3.812 bore aluminum Ultracase fully assembled with lightweight 40 spline 2.250 bearing journal spool, billet
aluminum pinion support, 4.86 to 6.50 Strange small stem pro 9310 gear set and CM yoke .... $1,679.50
3.812 bore aluminum Ultracase fully assembled with lightweight 40 spline 2.250 bearing journal spool, billet
aluminum pinion support, 3.89 to 4.86 Strange large stem pro 9310 gear set and CM yoke .... $1,729.00
40 Spline Spool Upgrade option .... $73.34
Yoke Upgrade option from Steel Yoke to Titanium Yoke .... $470.00
Pro Gear Upgrade option from 9” large stem pro gear to 9.50” gear set .... $192.50
Ball Bearing Support Upgrade option .... $110.00
Ball Bearing Support Upgrade option .... $103.95
Pro Gear Upgrade option from small stem to large stem .... $50.82
Ford 9.5' Ring and Pinion large Stem, 35 spline option, Gear Ratio 4.57 .... $687.50
Gear Set, GM 12-Bolt w/4-Series Spool, 3.73 Ratio .... $211.25
STGPRF115
Geese & Carey enterprises llC
dBa Vanishing Point Race Cars
32201 Queen anne Hwy
Queen anne, Md 21657 USa
STGPRF165
STGPRF205
STGPRF215
STGPRF225
April, 2016. Prices are subject to change without notice.
19
Phone
Fax
email
Web
(410) 364-5072
(410) 364-5075
[email protected]
www.vp-racecars.com
Rear End
Components
RING aNd PINIoN
9” FORD STANDARD
112-02 STd 3:25 Ratio .... $198.00
112-04 STd 3:50 Ratio .... $169.00
112-05 STd 3:70 Ratio .... $169.00
112-06 STd 3:89 Ratio .... $169.00
112-07 STd 4:00 Ratio .... $373.00
112-08 STd 4:11 Ratio .... $169.00
112-09 STd 4:30 Ratio .... $169.00
112-10 STd 4:57 Ratio .... $188.00
112-11
STd 4:86 Ratio .... $188.00
112-12 STd 5:14 Ratio .... $188.00
112-13 STd 5:29 Ratio .... $188.00
112-14 STd 5:43 Ratio .... $188.00
112-15 STd 5:67 Ratio .... $188.00
112-16 STd 5:83 Ratio .... $188.00
112-17 STd 6:00 Ratio .... $188.00
112-18 STd 6:14 Ratio .... $250.00
112-19 STd 6:33 Ratio .... $188.00
9” FORD PRO
112-20
PRo 3:40 Ratio .... $388.99
112-21
PRo 3:50 Ratio .... $388.99
112-22
PRo 3:70 Ratio .... $388.99
112-23
PRo 3:89 Ratio .... $388.99
112-24
PRo 4:11 Ratio .... $388.99
112-25
PRo 4:29 Ratio .... $388.99
112-26
PRo 4:57 Ratio .... $388.99
112-27
PRo 4:71 Ratio .... $388.99
112-28
PRo 4:86 Ratio .... $388.99
112-32
PRo 5:43 Ratio .... $388.99
112-29
PRo 4:86 Ratio - Small Stem Ring .... $388.99
112-30
PRo 5:14 Ratio - Small Stem Ring .... $371.11
112-31
PRo 5:29 Ratio - Small Stem Ring .... $371.11
112-33
PRo 5:67 Ratio - Small Stem Ring .... $371.11
112-34
PRo 5:83 Ratio - Small Stem Ring .... $371.11
112-35
PRo 6:00 Ratio - Small Stem Ring .... $371.11
112-36
PRo 6:20 Ratio - Small Stem Ring .... $371.11
112-37
PRo 6:50 Ratio - Small Stem Ring .... $371.11
11” MARK WILLIAMS
112-55 PRo 3:20 Ratio .... $1,800.00
112-56 PRo 3:89 Ratio .... $1,800.00
112-58 PRo 4:11 Ratio .... $1,800.00
112-54 PRo 4:30 Ratio .... $1,800.00
112-57 lightened PRo 3:89 Ratio .... $2,062.94
DANA 60 STANDARD
112-38
STd 3:54 Ratio .... $276.67
112-39
STd 3:73 Ratio .... $226.67
112-40
STd 4:10 Ratio .... $265.56
112-41
STd 4:56 Ratio .... $226.67
112-42
STd 4:88 Ratio .... $226.67
DANA 60 PRO
112-45 PRo 4:10 Ratio .... $416.67
112-46 PRo 4:56 Ratio .... $416.67
112-47 PRo 4:88 Ratio .... $416.67
112-48 PRo 5:13 Ratio .... $330.00
112-49 PRo 5:38 Ratio .... $388.89
112-52 PRo 6:17 Ratio .... $438.89
112-53 PRo 6:50 Ratio .... $438.89
Geese & Carey enterprises llC
dBa Vanishing Point Race Cars
32201 Queen anne Hwy
Queen anne, Md 21657 USa
April, 2016. Prices are subject to change without notice.
20
Phone
Fax
email
Web
(410) 364-5072
(410) 364-5075
[email protected]
www.vp-racecars.com
Rear End
Components
STRaNGe axleS
STGa1000
STGa1005
STGa1006
STGa2000
STGa2040
STGa2100
STGB1855
STGF1292
STGF2201
STGF2203WC
STGF2209
STGF2210
STGF2211WC
STGF2212WC
Pro Race Hy-Tuf axles up to 35 Spline, pair .... $410.30
lightweight option for Strange 35 Spline Gun drilled .875 Id
axles w/ five 1” round holes in flange, pair .... $128.40
lightweight option for Strange axles - Pocket Mill axle Flange, pair .... $74.50
Pro Race Hy-Tuf 40 Spline Gun drilled .875 Id axles w/ five
STGa1000
1” lightening holes in flange, pair .... $522.50
40 Spline Hy-Tuf Gun drilled Floater Shaft, per shaft .... $198.00
Pro Race Hy-Tuf 40 Spline Solid axles w/ five 1” lightening holes
in flange, pair .... $437.80
Caliper Kit w/ Metallic Pads for Steel Brake Floater axle Kit .... $359.00
13-1/2” long Floater Spindles, pair .... $440.00
lightweight scalloped hub aluminum full floating axle kit for 40-spline floater shafts,
13-1/2” long spindles. Fits on 5 on 5-1/2” b/c. axles and caliper kit are sold separately .... $1,555.05
lightweight scalloped hub aluminum full floating axle kit for 40-spline floater shafts,
13-1/2” long spindles. Kit includes carbon rotors, carbon pads and brake calipers.
Fits on 5 on 5-1/2” bc. axles are sold separately .... $4,504.92
aluminum full floating axle kit w/ steel brakes for 40 spline floater shafts, 8-1/2” long spindles.
Fits on 5 on 4-3/4” b/c and 5 on 5” b/c. Gun drilled axle Kit #STGa2040
and caliper kit #STGB1855 are sold separately .... $1,335.42
aluminum full floating axle kit for 40 spline floater shafts,13-1/2” long spindles.
Fits on 5 on 4-3/4” b/c and 5 on 5” b/c. axles and caliper kit are sold separately .... $1,454.15
aluminum full floating axle kit for 40 spline floater shafts, 13-1/2” long spindles. Kit includes carbon rotors,
carbon pads and brake calipers. Fits on 5 on 4-3/4” b/c and 5 on 5” b/c. axles are sold separately .... $4,504.92
aluminum full floating axle kit w/ carbon brakes for 40 spline floater shafts, 8-1/2” spindles.
Fits on 5 on 4-3/4” b/c and 5 on 5” b/c. Gun drilled axle Kit #STGa2040 and 13-1/2” long spindle
option #STGF1292 are sold separately .... $4,386.22
STGa2000
STGF2210
STRaNGe axle PaCKaGeS
STGP1007
STGP100758
STGP1013
STGP1014
STGP1015
STGP1016
Pro Race Hy-Tuf axles up to 35 Spline, axle Bearings and 1/2” Stud Kit .... $439.49
Pro Race Hy-Tuf axles up to 35 Spline, axle Bearings and 5/8” Stud Kit .... $489.50
Pro Race Hy-Tuf Gun drilled axles up to 35 Spline w/ five 1” lightening
holes in flange, axle Bearings and 5/8” Stud Kit .... $606.04
Pro Race Hy-Tuf 40 Spline Gun drilled axles w/ five 1” lightening
holes in flange, axle Bearings and 5/8” Stud Kit .... $632.40
Pro Race Hy-Tuf 40 Spline Gun drilled axles w/ five 1” lightening
holes in flange, double Row Bearings and 5/8” Stud Kit .... $780.00
Pro Race Hy-Tuf 40 Spline Solid axles w/ five 1” lightening
holes in flange, axle Bearings and 5/8” Stud Kit .... $551.74
Geese & Carey enterprises llC
dBa Vanishing Point Race Cars
32201 Queen anne Hwy
Queen anne, Md 21657 USa
April, 2016. Prices are subject to change without notice.
21
STGP1014
STGP1016
Phone
Fax
email
Web
(410) 364-5072
(410) 364-5075
[email protected]
www.vp-racecars.com
Rear End
Components
MaRK WIllIaMS axleS
MW-34
MW50100
MW50400
MW50500
MW50800
MW55004
MW55035
MW95400
MW95450
MW95555
MW95570
MW95700
MW95750
MW95800
MW95850
MW76x6261
o-Ring - 40 Spline Floater Cover .... $3.43
Standard Hi-Torque axles, pair .... $606.00
Pro Street Hi-Torque axles, pair .... $606.00
Gun drilled Superlight Hi-Torque axles, pair .... $ 742.00
Gun drilled Ultimate Hi-Torque axles, pair .... $ 1,138.00
Floater Spindle ea., Short Spindle 7-7/16” overall length, 3-1/32” length from flange .... $479.61
Floater Spindle ea., long Spindle 12-9/16” overall length, 8-1/8” length from flange .... $402.00
Gen II 40 Spline Floater Kit 5 on 5” b/c, Carbon Brakes .... $5,872.38
Gen II 40 Spline Floater Kit 5 on 5” b/c, Carbon Brakes, less Floater Spindles .... $5,391.00
Gen II 40 Spline Floater Kit 5 on 5-1/2” b/c, Carbon Brakes .... $5,872.38
Gen II 40 Spline Floater Kit 5 on 5-1/2” b/c, Carbon Brakes, less Floater Spindles .... $5,326.60
Gen II 40 Spline Floater Kit 5 on 5” b/c, Steel Brakes .... $3,087.62
Gen II 40 Spline Floater Kit 5 on 5” b/c, Steel Brakes, less Floater Spindles .... $2,627.63
Gen II 40 Spline Floater Kit 5 on 5-1/2” b/c, Steel Brakes .... $3,087.62
Gen II 40 Spline Floater Kit 5 on 5-1/2” b/c, Steel Brakes, less Floater Spindles .... $2,541.90
Seal for 40 Spline drive Plate .... $12.50
MW95700
MW95400
MoSeR axleS
MSR040
MSR2835
MSRex
MSRoPFl
MSRoPGd
Geese & Carey enterprises llC
dBa Vanishing Point Race Cars
32201 Queen anne Hwy
Queen anne, Md 21657 USa
Custom alloy axles 40 Spline, pair .... $458.33
Custom alloy axles up to 35 Spline, pair .... $347.22
extreme axles 40 Spline, Star Flanged and Gun drilled, pair .... $625.00
Flanged lightening option for 35 and 40 Spline axles, pair .... $55.00
Gun drilled option for 35 and 40 Spline axles, pair .... $111.12
April, 2016. Prices are subject to change without notice.
22
Phone
Fax
email
Web
(410) 364-5072
(410) 364-5075
[email protected]
www.vp-racecars.com